m68k: Remove M54451EVB board
authorTom Rini <trini@konsulko.com>
Mon, 12 Jul 2021 16:42:13 +0000 (12:42 -0400)
committerTom Rini <trini@konsulko.com>
Mon, 19 Jul 2021 01:03:57 +0000 (21:03 -0400)
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is also the last in family remove the related
support as well.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
23 files changed:
arch/m68k/Kconfig
arch/m68k/Makefile
arch/m68k/cpu/mcf5445x/cpu_init.c
arch/m68k/cpu/mcf5445x/dspi.c
arch/m68k/cpu/mcf5445x/speed.c
arch/m68k/cpu/mcf5445x/start.S
arch/m68k/dts/M54451EVB.dts [deleted file]
arch/m68k/dts/M54451EVB_stmicro.dts [deleted file]
arch/m68k/dts/Makefile
arch/m68k/dts/mcf5445x.dtsi [deleted file]
arch/m68k/include/asm/cache.h
arch/m68k/include/asm/immap.h
arch/m68k/include/asm/immap_5445x.h [deleted file]
arch/m68k/include/asm/m5445x.h [deleted file]
board/freescale/m54451evb/Kconfig [deleted file]
board/freescale/m54451evb/MAINTAINERS [deleted file]
board/freescale/m54451evb/Makefile [deleted file]
board/freescale/m54451evb/m54451evb.c [deleted file]
board/freescale/m54451evb/sbf_dram_init.S [deleted file]
configs/M54451EVB_defconfig [deleted file]
configs/M54451EVB_stmicro_defconfig [deleted file]
drivers/net/mcffec.c
include/configs/M54451EVB.h [deleted file]

index c48b8a5..2d47141 100644 (file)
@@ -53,12 +53,6 @@ config MCF5441x
         select DM_SERIAL
        bool
 
-config MCF5445x
-       select OF_CONTROL
-       select DM
-        select DM_SERIAL
-       bool
-
 config MCF5227x
        select OF_CONTROL
        select DM
@@ -119,10 +113,6 @@ config M54418
        bool
        select MCF5441x
 
-config M54451
-       bool
-       select MCF5445x
-
 config M52277
        bool
        select MCF5227x
@@ -187,10 +177,6 @@ config TARGET_M5373EVB
        bool "Support M5373EVB"
        select M5373
 
-config TARGET_M54451EVB
-       bool "Support M54451EVB"
-       select M54451
-
 config TARGET_AMCORE
        bool "Support AMCORE"
        select M5307
@@ -215,7 +201,6 @@ source "board/freescale/m5282evb/Kconfig"
 source "board/freescale/m53017evb/Kconfig"
 source "board/freescale/m5329evb/Kconfig"
 source "board/freescale/m5373evb/Kconfig"
-source "board/freescale/m54451evb/Kconfig"
 source "board/sysam/amcore/Kconfig"
 source "board/sysam/stmark2/Kconfig"
 
index 86b36e1..63f1810 100644 (file)
@@ -18,13 +18,11 @@ cpuflags-$(CONFIG_M5307)    := -mcpu=5307
 cpuflags-$(CONFIG_MCF5301x)    := -mcpu=53015 -fPIC
 cpuflags-$(CONFIG_MCF532x)     := -mcpu=5329 -fPIC
 cpuflags-$(CONFIG_MCF5441x)    := -mcpu=54418 -fPIC
-cpuflags-$(CONFIG_MCF5445x)    := -mcpu=54455 -fPIC
 
 PLATFORM_CPPFLAGS += $(cpuflags-y)
 
 
 ldflags-$(CONFIG_MCF5441x)     := --got=single
-ldflags-$(CONFIG_MCF5445x)     := --got=single
 
 ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
 ifneq (,$(findstring GOT,$(shell $(LD) --help)))
index 9deab51..9b3f9f0 100644 (file)
@@ -73,13 +73,6 @@ void cfspi_port_conf(void)
 {
        gpio_t *gpio = (gpio_t *)MMAP_GPIO;
 
-#ifdef CONFIG_MCF5445x
-       out_8(&gpio->par_dspi,
-             GPIO_PAR_DSPI_SIN_SIN |
-             GPIO_PAR_DSPI_SOUT_SOUT |
-             GPIO_PAR_DSPI_SCK_SCK);
-#endif
-
 #ifdef CONFIG_MCF5441x
        pm_t *pm = (pm_t *)MMAP_PM;
 
@@ -212,36 +205,6 @@ void cpu_init_f(void)
 #endif
 #endif         /* CONFIG_MCF5441x */
 
-#ifdef CONFIG_MCF5445x
-       scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
-
-       out_be32(&scm1->mpr, 0x77777777);
-       out_be32(&scm1->pacra, 0);
-       out_be32(&scm1->pacrb, 0);
-       out_be32(&scm1->pacrc, 0);
-       out_be32(&scm1->pacrd, 0);
-       out_be32(&scm1->pacre, 0);
-       out_be32(&scm1->pacrf, 0);
-       out_be32(&scm1->pacrg, 0);
-
-       /* FlexBus */
-       out_8(&gpio->par_be,
-               GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
-               GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
-       out_8(&gpio->par_fbctl,
-               GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
-               GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
-
-#ifdef CONFIG_CF_SPI
-       cfspi_port_conf();
-#endif
-
-#ifdef CONFIG_SYS_FSL_I2C
-       out_be16(&gpio->par_feci2c,
-               GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
-#endif
-#endif         /* CONFIG_MCF5445x */
-
        /* FlexBus Chipselect */
        init_fbcs();
 
@@ -365,40 +328,6 @@ void uart_port_conf(int port)
                        GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
                break;
 #endif
-#ifdef CONFIG_MCF5445x
-       case 0:
-               clrbits_8(&gpio->par_uart,
-                       GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
-               setbits_8(&gpio->par_uart,
-                       GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
-               break;
-       case 1:
-#ifdef CONFIG_SYS_UART1_PRI_GPIO
-               clrbits_8(&gpio->par_uart,
-                       GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
-               setbits_8(&gpio->par_uart,
-                       GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
-#elif defined(CONFIG_SYS_UART1_ALT1_GPIO)
-               clrbits_be16(&gpio->par_ssi,
-                       ~(GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK));
-               setbits_be16(&gpio->par_ssi,
-                       GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD);
-#endif
-               break;
-       case 2:
-#if defined(CONFIG_SYS_UART2_ALT1_GPIO)
-               clrbits_8(&gpio->par_timer,
-                       ~(GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK));
-               setbits_8(&gpio->par_timer,
-                       GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD);
-#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
-               clrbits_8(&gpio->par_timer,
-                       ~(GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK));
-               setbits_8(&gpio->par_timer,
-                       GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
-#endif
-               break;
-#endif /* CONFIG_MCF5445x */
        }
 }
 
@@ -411,46 +340,6 @@ int fecpin_setclear(fec_info_t *info, int setclear)
        if (fec_get_base_addr(0, &fec0_base))
                return -1;
 
-#ifdef CONFIG_MCF5445x
-       if (setclear) {
-#ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
-               if (info->iobase == fec0_base)
-                       setbits_be16(&gpio->par_feci2c,
-                               GPIO_PAR_FECI2C_MDC0_MDC0 |
-                               GPIO_PAR_FECI2C_MDIO0_MDIO0);
-               else
-                       setbits_be16(&gpio->par_feci2c,
-                               GPIO_PAR_FECI2C_MDC1_MDC1 |
-                               GPIO_PAR_FECI2C_MDIO1_MDIO1);
-#else
-               setbits_be16(&gpio->par_feci2c,
-                       GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-#endif
-
-               if (info->iobase == fec0_base)
-                       setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_RMII_GPIO);
-               else
-                       setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_RMII_ATA);
-       } else {
-               clrbits_be16(&gpio->par_feci2c,
-                       GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-               if (info->iobase == fec0_base) {
-#ifdef CONFIG_SYS_FEC_FULL_MII
-                       setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_MII);
-#else
-                       clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC0_UNMASK);
-#endif
-               } else {
-#ifdef CONFIG_SYS_FEC_FULL_MII
-                       setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_MII);
-#else
-                       clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC1_UNMASK);
-#endif
-               }
-       }
-#endif /* CONFIG_MCF5445x */
-
 #ifdef CONFIG_MCF5441x
        if (setclear) {
                out_8(&gpio->par_fec, 0x03);
index b0e2f2c..456af17 100644 (file)
@@ -15,30 +15,6 @@ void dspi_chip_select(int cs)
 {
        struct gpio *gpio = (struct gpio *)MMAP_GPIO;
 
-#ifdef CONFIG_MCF5445x
-       switch (cs) {
-       case 0:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
-               setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
-               break;
-       case 1:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
-               setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
-               break;
-       case 2:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
-               setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
-               break;
-       case 3:
-               clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
-               setbits_8(&gpio->par_dma, GPIO_PAR_DMA_DACK0_PCS3);
-               break;
-       case 5:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
-               setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
-               break;
-       }
-#endif
 #ifdef CONFIG_MCF5441x
        switch (cs) {
        case 0:
@@ -61,25 +37,6 @@ void dspi_chip_unselect(int cs)
 {
        struct gpio *gpio = (struct gpio *)MMAP_GPIO;
 
-#ifdef CONFIG_MCF5445x
-       switch (cs) {
-       case 0:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
-               break;
-       case 1:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
-               break;
-       case 2:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
-               break;
-       case 3:
-               clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
-               break;
-       case 5:
-               clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
-               break;
-       }
-#endif
 #ifdef CONFIG_MCF5441x
        if (cs == 1)
                clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
index 4809bb4..eb73da6 100644 (file)
@@ -42,11 +42,6 @@ void clock_enter_limp(int lpdiv)
        /* Round divider down to nearest power of two */
        for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
 
-#ifdef CONFIG_MCF5445x
-       /* Apply the divider to the system clock */
-       clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i));
-#endif
-
        /* Enable Limp Mode */
        setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
 }
@@ -127,135 +122,12 @@ void setup_5441x_clocks(void)
 }
 #endif
 
-#ifdef CONFIG_MCF5445x
-void setup_5445x_clocks(void)
-{
-       ccm_t *ccm = (ccm_t *)MMAP_CCM;
-       pll_t *pll = (pll_t *)MMAP_PLL;
-       int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
-       int pllmult_pci[] = { 12, 6, 16, 8 };
-       int vco = 0, temp, fbtemp, pcrvalue;
-       int *pPllmult = NULL;
-       u16 fbpll_mask;
-#ifdef CONFIG_PCI
-       int bPci;
-#endif
-
-       u8 bootmode;
-
-       /* To determine PCI is present or not */
-       if (((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) ||
-           ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
-               pPllmult = &pllmult_pci[0];
-               fbpll_mask = 3;         /* 11b */
-#ifdef CONFIG_PCI
-               bPci = 1;
-#endif
-       } else {
-               pPllmult = &pllmult_nopci[0];
-               fbpll_mask = 7;         /* 111b */
-#ifdef CONFIG_PCI
-               gd->pci_clk = 0;
-               bPci = 0;
-#endif
-       }
-
-#ifdef CONFIG_M54451EVB
-       /* No external logic to read the bootmode, hard coded from built */
-#ifdef CONFIG_CF_SBF
-       bootmode = 3;
-#else
-       bootmode = 2;
-
-       /* default value is 16 mul, set to 20 mul */
-       pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF) | 0x14000000;
-       out_be32(&pll->pcr, pcrvalue);
-       while ((in_be32(&pll->psr) & PLL_PSR_LOCK) != PLL_PSR_LOCK)
-               ;
-#endif
-#endif
-
-       if (bootmode == 0) {
-               /* RCON mode */
-               vco = pPllmult[ccm->rcon & fbpll_mask] * CONFIG_SYS_INPUT_CLKSRC;
-
-               if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
-                       /* invaild range, re-set in PCR */
-                       int temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
-                       int i, j, bus;
-
-                       j = (in_be32(&pll->pcr) & 0xFF000000) >> 24;
-                       for (i = j; i < 0xFF; i++) {
-                               vco = i * CONFIG_SYS_INPUT_CLKSRC;
-                               if (vco >= CLOCK_PLL_FVCO_MIN) {
-                                       bus = vco / temp;
-                                       if (bus <= CLOCK_PLL_FSYS_MIN - MHZ)
-                                               continue;
-                                       else
-                                               break;
-                               }
-                       }
-                       pcrvalue = in_be32(&pll->pcr) & 0x00FF00FF;
-                       fbtemp = ((i - 1) << 8) | ((i - 1) << 12);
-                       pcrvalue |= ((i << 24) | fbtemp);
-
-                       out_be32(&pll->pcr, pcrvalue);
-               }
-               gd->arch.vco_clk = vco; /* Vco clock */
-       } else if (bootmode == 2) {
-               /* Normal mode */
-               vco =  ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-               if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
-                       /* Default value */
-                       pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF);
-                       pcrvalue |= pPllmult[in_be16(&ccm->ccr) & fbpll_mask] << 24;
-                       out_be32(&pll->pcr, pcrvalue);
-                       vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-               }
-               gd->arch.vco_clk = vco; /* Vco clock */
-       } else if (bootmode == 3) {
-               /* serial mode */
-               vco =  ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-               gd->arch.vco_clk = vco; /* Vco clock */
-       }
-
-       if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
-               /* Limp mode */
-       } else {
-               gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
-
-               temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1;
-               gd->cpu_clk = vco / temp;       /* cpu clock */
-
-               temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
-               gd->bus_clk = vco / temp;       /* bus clock */
-
-               temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV3_MASK) >> 8) + 1;
-               gd->arch.flb_clk = vco / temp;  /* FlexBus clock */
-
-#ifdef CONFIG_PCI
-               if (bPci) {
-                       temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV4_MASK) >> 12) + 1;
-                       gd->pci_clk = vco / temp;       /* PCI clock */
-               }
-#endif
-       }
-
-#ifdef CONFIG_SYS_I2C_FSL
-       gd->arch.i2c1_clk = gd->bus_clk;
-#endif
-}
-#endif
-
 /* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
 int get_clocks(void)
 {
 #ifdef CONFIG_MCF5441x
        setup_5441x_clocks();
 #endif
-#ifdef CONFIG_MCF5445x
-       setup_5445x_clocks();
-#endif
 
 #ifdef CONFIG_SYS_FSL_I2C
        gd->arch.i2c1_clk = gd->bus_clk;
index 80eb287..7007d78 100644 (file)
@@ -202,10 +202,6 @@ asm_dspi_init:
        move.b  #0x80, (%a2)
 #endif
 
-#ifdef CONFIG_MCF5445x
-       move.l  #0xFC0A4063, %a0
-       move.b  #0x7F, (%a0)
-#endif
        /* Configure DSPI module */
        move.l  #0xFC05C000, %a0
        move.l  #0x80FF0C00, (%a0)      /* Master, clear TX/RX FIFO */
@@ -214,9 +210,6 @@ asm_dspi_init:
 #ifdef CONFIG_MCF5441x
        move.l  #0x3E000016, (%a0)
 #endif
-#ifdef CONFIG_MCF5445x
-       move.l  #0x3E000011, (%a0)
-#endif
 
        move.l  #0xFC05C034, %a2        /* dtfr */
        move.l  #0xFC05C03B, %a3        /* drfr */
diff --git a/arch/m68k/dts/M54451EVB.dts b/arch/m68k/dts/M54451EVB.dts
deleted file mode 100644 (file)
index b81d37a..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-       model = "Freescale M54451EVB";
-       compatible = "fsl,M54451EVB";
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&uart0 {
-       u-boot,dm-pre-reloc;
-       status = "okay";
-};
-
-&dspi0 {
-       status = "okay";
-};
-
-&fec0 {
-       status = "okay";
-};
-
-&fec1 {
-       status = "okay";
-};
diff --git a/arch/m68k/dts/M54451EVB_stmicro.dts b/arch/m68k/dts/M54451EVB_stmicro.dts
deleted file mode 100644 (file)
index 6645b58..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-       model = "Freescale M54451EVB_stmicro";
-       compatible = "fsl,M54451EVB";
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&uart0 {
-       u-boot,dm-pre-reloc;
-       status = "okay";
-};
-
-&dspi0 {
-       status = "okay";
-};
-
-&fec0 {
-       status = "okay";
-};
-
-&fec1 {
-       status = "okay";
-};
index 829edb8..49618e6 100644 (file)
@@ -17,8 +17,6 @@ dtb-$(CONFIG_TARGET_ASTRO_MCF5373L) += astro_mcf5373l.dtb
 dtb-$(CONFIG_TARGET_M53017EVB) += M53017EVB.dtb
 dtb-$(CONFIG_TARGET_M5329EVB) += M5329AFEE.dtb M5329BFEE.dtb
 dtb-$(CONFIG_TARGET_M5373EVB) += M5373EVB.dtb
-dtb-$(CONFIG_TARGET_M54451EVB) += M54451EVB.dtb \
-       M54451EVB_stmicro.dtb
 dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb
 dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
 
diff --git a/arch/m68k/dts/mcf5445x.dtsi b/arch/m68k/dts/mcf5445x.dtsi
deleted file mode 100644 (file)
index b7ecc99..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/ {
-       compatible = "fsl,mcf5445x";
-
-       aliases {
-               serial0 = &uart0;
-               spi0 = &dspi0;
-               fec0 = &fec0;
-               fec1 = &fec1;
-       };
-
-       soc {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               uart0: uart@fc060000 {
-                       compatible = "fsl,mcf-uart";
-                       reg = <0xfc060000 0x40>;
-                       status = "disabled";
-               };
-
-               uart1: uart@fc064000 {
-                       compatible = "fsl,mcf-uart";
-                       reg = <0xfc064000 0x40>;
-                       status = "disabled";
-               };
-
-               uart2: uart@fc068000 {
-                       compatible = "fsl,mcf-uart";
-                       reg = <0xfc068000 0x40>;
-                       status = "disabled";
-               };
-
-               dspi0: dspi@fc05c000 {
-                       compatible = "fsl,mcf-dspi";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0xfc05c000 0x100>;
-                       spi-max-frequency = <50000000>;
-                       num-cs = <4>;
-                       spi-mode = <0>;
-                       status = "disabled";
-               };
-
-               fec0: ethernet@fc030000 {
-                       compatible = "fsl,mcf-fec";
-                       reg = <0xfc030000 0x4000>;
-                       mii-base = <0>;
-                       max-speed = <100>;
-                       timeout-loop = <50000>;
-                       status = "disabled";
-               };
-
-               fec1: ethernet@fc034000 {
-                       compatible = "fsl,mcf-fec";
-                       reg = <0xfc034000 0x4000>;
-                       mii-base = <1>;
-                       max-speed = <100>;
-                       timeout-loop = <50000>;
-                       status = "disabled";
-               };
-       };
-};
index fabec0a..1c04d6d 100644 (file)
@@ -19,9 +19,7 @@
 #define CONFIG_CF_V3
 #endif
 
-#if defined(CONFIG_MCF5445x)
-#define CONFIG_CF_V4
-#elif defined(CONFIG_MCF5441x)
+#if defined(CONFIG_MCF5441x)
 #define CONFIG_CF_V4E          /* Four Extra ACRn */
 #endif
 
index 07d9745..81837a7 100644 (file)
 
 #endif                         /* CONFIG_M54418 */
 
-#if defined(CONFIG_M54451)
-#include <asm/immap_5445x.h>
-#include <asm/m5445x.h>
-
-#define CONFIG_SYS_FEC0_IOBASE         (MMAP_FEC0)
-
-#define CONFIG_SYS_UART_BASE           (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-
-#define CONFIG_SYS_MCFRTC_BASE         (MMAP_RTC)
-
-/* Timer */
-#ifdef CONFIG_MCFTMR
-#define CONFIG_SYS_UDELAY_BASE         (MMAP_DTMR0)
-#define CONFIG_SYS_TMR_BASE            (MMAP_DTMR1)
-#define CONFIG_SYS_TMRPND_REG          (((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
-#define CONFIG_SYS_TMRINTR_NO          (INT0_HI_DTMR1)
-#define CONFIG_SYS_TMRINTR_MASK        (INTC_IPRH_INT33)
-#define CONFIG_SYS_TMRINTR_PEND        (CONFIG_SYS_TMRINTR_MASK)
-#define CONFIG_SYS_TMRINTR_PRI         (6)
-#define CONFIG_SYS_TIMER_PRESCALER     (((gd->bus_clk / 1000000) - 1) << 8)
-#endif
-
-#define CONFIG_SYS_INTR_BASE           (MMAP_INTC0)
-#define CONFIG_SYS_NUM_IRQS            (128)
-
-#ifdef CONFIG_PCI
-#define CONFIG_SYS_PCI_BAR0            (CONFIG_SYS_MBAR)
-#define CONFIG_SYS_PCI_BAR5            (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_PCI_TBATR0          (CONFIG_SYS_MBAR)
-#define CONFIG_SYS_PCI_TBATR5          (CONFIG_SYS_SDRAM_BASE)
-#endif
-#endif                         /* CONFIG_M54451 */
-
 #ifdef CONFIG_M547x
 #include <asm/immap_547x_8x.h>
 #include <asm/m547x_8x.h>
diff --git a/arch/m68k/include/asm/immap_5445x.h b/arch/m68k/include/asm/immap_5445x.h
deleted file mode 100644 (file)
index 3111d00..0000000
+++ /dev/null
@@ -1,335 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5445x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __IMMAP_5445X__
-#define __IMMAP_5445X__
-
-/* Module Base Addresses */
-#define MMAP_SCM1      0xFC000000
-#define MMAP_XBS       0xFC004000
-#define MMAP_FBCS      0xFC008000
-#define MMAP_FEC0      0xFC030000
-#define MMAP_FEC1      0xFC034000
-#define MMAP_RTC       0xFC03C000
-#define MMAP_SCM2      0xFC040000
-#define MMAP_EDMA      0xFC044000
-#define MMAP_INTC0     0xFC048000
-#define MMAP_INTC1     0xFC04C000
-#define MMAP_IACK      0xFC054000
-#define MMAP_I2C       0xFC058000
-#define MMAP_DSPI      0xFC05C000
-#define MMAP_UART0     0xFC060000
-#define MMAP_UART1     0xFC064000
-#define MMAP_UART2     0xFC068000
-#define MMAP_DTMR0     0xFC070000
-#define MMAP_DTMR1     0xFC074000
-#define MMAP_DTMR2     0xFC078000
-#define MMAP_DTMR3     0xFC07C000
-#define MMAP_PIT0      0xFC080000
-#define MMAP_PIT1      0xFC084000
-#define MMAP_PIT2      0xFC088000
-#define MMAP_PIT3      0xFC08C000
-#define MMAP_EPORT     0xFC094000
-#define MMAP_WTM       0xFC098000
-#define MMAP_SBF       0xFC0A0000
-#define MMAP_RCM       0xFC0A0000
-#define MMAP_CCM       0xFC0A0000
-#define MMAP_GPIO      0xFC0A4000
-#define MMAP_PCI       0xFC0A8000
-#define MMAP_PCIARB    0xFC0AC000
-#define MMAP_RNG       0xFC0B4000
-#define MMAP_SDRAM     0xFC0B8000
-#define MMAP_SSI       0xFC0BC000
-#define MMAP_PLL       0xFC0C4000
-#define MMAP_ATA       0x90000000
-#define MMAP_USBHW     0xFC0B0000
-#define MMAP_USBCAPS   0xFC0B0100
-#define MMAP_USBEHCI   0xFC0B0140
-#define MMAP_USBOTG    0xFC0B01A0
-
-#include <asm/coldfire/ata.h>
-#include <asm/coldfire/crossbar.h>
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/edma.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/intctrl.h>
-#include <asm/coldfire/ssi.h>
-
-/* Watchdog Timer Modules (WTM) */
-typedef struct wtm {
-       u16 wcr;
-       u16 wmr;
-       u16 wcntr;
-       u16 wsr;
-} wtm_t;
-
-/* Serial Boot Facility (SBF) */
-typedef struct sbf {
-       u8 resv0[0x18];
-       u16 sbfsr;              /* Serial Boot Facility Status Register */
-       u8 resv1[0x6];
-       u16 sbfcr;              /* Serial Boot Facility Control Register */
-} sbf_t;
-
-/* Reset Controller Module (RCM) */
-typedef struct rcm {
-       u8 rcr;
-       u8 rsr;
-} rcm_t;
-
-/* Chip Configuration Module (CCM) */
-typedef struct ccm {
-       u8 ccm_resv0[0x4];
-       u16 ccr;                /* Chip Configuration Register (256 TEPBGA, Read-only) */
-       u8 resv1[0x2];
-       u16 rcon;               /* Reset Configuration (256 TEPBGA, Read-only) */
-       u16 cir;                /* Chip Identification Register (Read-only) */
-       u8 resv2[0x4];
-       u16 misccr;             /* Miscellaneous Control Register */
-       u16 cdr;                /* Clock Divider Register */
-       u16 uocsr;              /* USB On-the-Go Controller Status Register */
-} ccm_t;
-
-/* General Purpose I/O Module (GPIO) */
-typedef struct gpio {
-       u8 podr_fec0h;          /* FEC0 High Port Output Data Register */
-       u8 podr_fec0l;          /* FEC0 Low Port Output Data Register */
-       u8 podr_ssi;            /* SSI Port Output Data Register */
-       u8 podr_fbctl;          /* Flexbus Control Port Output Data Register */
-       u8 podr_be;             /* Flexbus Byte Enable Port Output Data Register */
-       u8 podr_cs;             /* Flexbus Chip-Select Port Output Data Register */
-       u8 podr_dma;            /* DMA Port Output Data Register */
-       u8 podr_feci2c;         /* FEC1 / I2C Port Output Data Register */
-       u8 resv0[0x1];
-       u8 podr_uart;           /* UART Port Output Data Register */
-       u8 podr_dspi;           /* DSPI Port Output Data Register */
-       u8 podr_timer;          /* Timer Port Output Data Register */
-       u8 podr_pci;            /* PCI Port Output Data Register */
-       u8 podr_usb;            /* USB Port Output Data Register */
-       u8 podr_atah;           /* ATA High Port Output Data Register */
-       u8 podr_atal;           /* ATA Low Port Output Data Register */
-       u8 podr_fec1h;          /* FEC1 High Port Output Data Register */
-       u8 podr_fec1l;          /* FEC1 Low Port Output Data Register */
-       u8 resv1[0x2];
-       u8 podr_fbadh;          /* Flexbus AD High Port Output Data Register */
-       u8 podr_fbadmh;         /* Flexbus AD Med-High Port Output Data Register */
-       u8 podr_fbadml;         /* Flexbus AD Med-Low Port Output Data Register */
-       u8 podr_fbadl;          /* Flexbus AD Low Port Output Data Register */
-       u8 pddr_fec0h;          /* FEC0 High Port Data Direction Register */
-       u8 pddr_fec0l;          /* FEC0 Low Port Data Direction Register */
-       u8 pddr_ssi;            /* SSI Port Data Direction Register */
-       u8 pddr_fbctl;          /* Flexbus Control Port Data Direction Register */
-       u8 pddr_be;             /* Flexbus Byte Enable Port Data Direction Register */
-       u8 pddr_cs;             /* Flexbus Chip-Select Port Data Direction Register */
-       u8 pddr_dma;            /* DMA Port Data Direction Register */
-       u8 pddr_feci2c;         /* FEC1 / I2C Port Data Direction Register */
-       u8 resv2[0x1];
-       u8 pddr_uart;           /* UART Port Data Direction Register */
-       u8 pddr_dspi;           /* DSPI Port Data Direction Register */
-       u8 pddr_timer;          /* Timer Port Data Direction Register */
-       u8 pddr_pci;            /* PCI Port Data Direction Register */
-       u8 pddr_usb;            /* USB Port Data Direction Register */
-       u8 pddr_atah;           /* ATA High Port Data Direction Register */
-       u8 pddr_atal;           /* ATA Low Port Data Direction Register */
-       u8 pddr_fec1h;          /* FEC1 High Port Data Direction Register */
-       u8 pddr_fec1l;          /* FEC1 Low Port Data Direction Register */
-       u8 resv3[0x2];
-       u8 pddr_fbadh;          /* Flexbus AD High Port Data Direction Register */
-       u8 pddr_fbadmh;         /* Flexbus AD Med-High Port Data Direction Register */
-       u8 pddr_fbadml;         /* Flexbus AD Med-Low Port Data Direction Register */
-       u8 pddr_fbadl;          /* Flexbus AD Low Port Data Direction Register */
-       u8 ppdsdr_fec0h;        /* FEC0 High Port Pin Data/Set Data Register */
-       u8 ppdsdr_fec0l;        /* FEC0 Low Port Clear Output Data Register */
-       u8 ppdsdr_ssi;          /* SSI Port Pin Data/Set Data Register */
-       u8 ppdsdr_fbctl;        /* Flexbus Control Port Pin Data/Set Data Register */
-       u8 ppdsdr_be;           /* Flexbus Byte Enable Port Pin Data/Set Data Register */
-       u8 ppdsdr_cs;           /* Flexbus Chip-Select Port Pin Data/Set Data Register */
-       u8 ppdsdr_dma;          /* DMA Port Pin Data/Set Data Register */
-       u8 ppdsdr_feci2c;       /* FEC1 / I2C Port Pin Data/Set Data Register */
-       u8 resv4[0x1];
-       u8 ppdsdr_uart;         /* UART Port Pin Data/Set Data Register */
-       u8 ppdsdr_dspi;         /* DSPI Port Pin Data/Set Data Register */
-       u8 ppdsdr_timer;        /* FTimer Port Pin Data/Set Data Register */
-       u8 ppdsdr_pci;          /* PCI Port Pin Data/Set Data Register */
-       u8 ppdsdr_usb;          /* USB Port Pin Data/Set Data Register */
-       u8 ppdsdr_atah;         /* ATA High Port Pin Data/Set Data Register */
-       u8 ppdsdr_atal;         /* ATA Low Port Pin Data/Set Data Register */
-       u8 ppdsdr_fec1h;        /* FEC1 High Port Pin Data/Set Data Register */
-       u8 ppdsdr_fec1l;        /* FEC1 Low Port Pin Data/Set Data Register */
-       u8 resv5[0x2];
-       u8 ppdsdr_fbadh;        /* Flexbus AD High Port Pin Data/Set Data Register */
-       u8 ppdsdr_fbadmh;       /* Flexbus AD Med-High Port Pin Data/Set Data Register */
-       u8 ppdsdr_fbadml;       /* Flexbus AD Med-Low Port Pin Data/Set Data Register */
-       u8 ppdsdr_fbadl;        /* Flexbus AD Low Port Pin Data/Set Data Register */
-       u8 pclrr_fec0h;         /* FEC0 High Port Clear Output Data Register */
-       u8 pclrr_fec0l;         /* FEC0 Low Port Pin Data/Set Data Register */
-       u8 pclrr_ssi;           /* SSI Port Clear Output Data Register */
-       u8 pclrr_fbctl;         /* Flexbus Control Port Clear Output Data Register */
-       u8 pclrr_be;            /* Flexbus Byte Enable Port Clear Output Data Register */
-       u8 pclrr_cs;            /* Flexbus Chip-Select Port Clear Output Data Register */
-       u8 pclrr_dma;           /* DMA Port Clear Output Data Register */
-       u8 pclrr_feci2c;        /* FEC1 / I2C Port Clear Output Data Register */
-       u8 resv6[0x1];
-       u8 pclrr_uart;          /* UART Port Clear Output Data Register */
-       u8 pclrr_dspi;          /* DSPI Port Clear Output Data Register */
-       u8 pclrr_timer;         /* Timer Port Clear Output Data Register */
-       u8 pclrr_pci;           /* PCI Port Clear Output Data Register */
-       u8 pclrr_usb;           /* USB Port Clear Output Data Register */
-       u8 pclrr_atah;          /* ATA High Port Clear Output Data Register */
-       u8 pclrr_atal;          /* ATA Low Port Clear Output Data Register */
-       u8 pclrr_fec1h;         /* FEC1 High Port Clear Output Data Register */
-       u8 pclrr_fec1l;         /* FEC1 Low Port Clear Output Data Register */
-       u8 resv7[0x2];
-       u8 pclrr_fbadh;         /* Flexbus AD High Port Clear Output Data Register */
-       u8 pclrr_fbadmh;        /* Flexbus AD Med-High Port Clear Output Data Register */
-       u8 pclrr_fbadml;        /* Flexbus AD Med-Low Port Clear Output Data Register */
-       u8 pclrr_fbadl;         /* Flexbus AD Low Port Clear Output Data Register */
-       u8 par_fec;             /* FEC Pin Assignment Register */
-       u8 par_dma;             /* DMA Pin Assignment Register */
-       u8 par_fbctl;           /* Flexbus Control Pin Assignment Register */
-       u8 par_dspi;            /* DSPI Pin Assignment Register */
-       u8 par_be;              /* Flexbus Byte-Enable Pin Assignment Register */
-       u8 par_cs;              /* Flexbus Chip-Select Pin Assignment Register */
-       u8 par_timer;           /* Time Pin Assignment Register */
-       u8 par_usb;             /* USB Pin Assignment Register */
-       u8 resv8[0x1];
-       u8 par_uart;            /* UART Pin Assignment Register */
-       u16 par_feci2c;         /* FEC / I2C Pin Assignment Register */
-       u16 par_ssi;            /* SSI Pin Assignment Register */
-       u16 par_ata;            /* ATA Pin Assignment Register */
-       u8 par_irq;             /* IRQ Pin Assignment Register */
-       u8 resv9[0x1];
-       u16 par_pci;            /* PCI Pin Assignment Register */
-       u8 mscr_sdram;          /* SDRAM Mode Select Control Register */
-       u8 mscr_pci;            /* PCI Mode Select Control Register */
-       u8 resv10[0x2];
-       u8 dscr_i2c;            /* I2C Drive Strength Control Register */
-       u8 dscr_flexbus;        /* FLEXBUS Drive Strength Control Register */
-       u8 dscr_fec;            /* FEC Drive Strength Control Register */
-       u8 dscr_uart;           /* UART Drive Strength Control Register */
-       u8 dscr_dspi;           /* DSPI Drive Strength Control Register */
-       u8 dscr_timer;          /* TIMER Drive Strength Control Register */
-       u8 dscr_ssi;            /* SSI Drive Strength Control Register */
-       u8 dscr_dma;            /* DMA Drive Strength Control Register */
-       u8 dscr_debug;          /* DEBUG Drive Strength Control Register */
-       u8 dscr_reset;          /* RESET Drive Strength Control Register */
-       u8 dscr_irq;            /* IRQ Drive Strength Control Register */
-       u8 dscr_usb;            /* USB Drive Strength Control Register */
-       u8 dscr_ata;            /* ATA Drive Strength Control Register */
-} gpio_t;
-
-/* SDRAM Controller (SDRAMC) */
-typedef struct sdramc {
-       u32 sdmr;               /* SDRAM Mode/Extended Mode Register */
-       u32 sdcr;               /* SDRAM Control Register */
-       u32 sdcfg1;             /* SDRAM Configuration Register 1 */
-       u32 sdcfg2;             /* SDRAM Chip Select Register */
-       u8 resv0[0x100];
-       u32 sdcs0;              /* SDRAM Mode/Extended Mode Register */
-       u32 sdcs1;              /* SDRAM Mode/Extended Mode Register */
-} sdramc_t;
-
-/* Phase Locked Loop (PLL) */
-typedef struct pll {
-       u32 pcr;                /* PLL Control Register */
-       u32 psr;                /* PLL Status Register */
-} pll_t;
-
-typedef struct pci {
-       u32 idr;                /* 0x00 Device Id / Vendor Id Register */
-       u32 scr;                /* 0x04 Status / command Register */
-       u32 ccrir;              /* 0x08 Class Code / Revision Id Register */
-       u32 cr1;                /* 0x0c Configuration 1 Register */
-       u32 bar0;               /* 0x10 Base address register 0 Register */
-       u32 bar1;               /* 0x14 Base address register 1 Register */
-       u32 bar2;               /* 0x18 Base address register 2 Register */
-       u32 bar3;               /* 0x1c Base address register 3 Register */
-       u32 bar4;               /* 0x20 Base address register 4 Register */
-       u32 bar5;               /* 0x24 Base address register 5 Register */
-       u32 ccpr;               /* 0x28 Cardbus CIS Pointer Register */
-       u32 sid;                /* 0x2c Subsystem ID / Subsystem Vendor ID Register */
-       u32 erbar;              /* 0x30 Expansion ROM Base Address Register */
-       u32 cpr;                /* 0x34 Capabilities Pointer Register */
-       u32 rsvd1;              /* 0x38 */
-       u32 cr2;                /* 0x3c Configuration Register 2 */
-       u32 rsvd2[8];           /* 0x40 - 0x5f */
-
-       /* General control / status registers */
-       u32 gscr;               /* 0x60 Global Status / Control Register */
-       u32 tbatr0a;            /* 0x64 Target Base Address Translation Register  0 */
-       u32 tbatr1a;            /* 0x68 Target Base Address Translation Register  1 */
-       u32 tcr1;               /* 0x6c Target Control 1 Register */
-       u32 iw0btar;            /* 0x70 Initiator Window 0 Base/Translation addr */
-       u32 iw1btar;            /* 0x74 Initiator Window 1 Base/Translation addr */
-       u32 iw2btar;            /* 0x78 Initiator Window 2 Base/Translation addr */
-       u32 rsvd3;              /* 0x7c */
-       u32 iwcr;               /* 0x80 Initiator Window Configuration Register */
-       u32 icr;                /* 0x84 Initiator Control Register */
-       u32 isr;                /* 0x88 Initiator Status Register */
-       u32 tcr2;               /* 0x8c Target Control 2 Register */
-       u32 tbatr0;             /* 0x90 Target Base Address Translation Register  0 */
-       u32 tbatr1;             /* 0x94 Target Base Address Translation Register  1 */
-       u32 tbatr2;             /* 0x98 Target Base Address Translation Register  2 */
-       u32 tbatr3;             /* 0x9c Target Base Address Translation Register  3 */
-       u32 tbatr4;             /* 0xa0 Target Base Address Translation Register  4 */
-       u32 tbatr5;             /* 0xa4 Target Base Address Translation Register  5 */
-       u32 intr;               /* 0xa8 Interrupt Register */
-       u32 rsvd4[19];          /* 0xac - 0xf7 */
-       u32 car;                /* 0xf8 Configuration Address Register */
-} pci_t;
-
-typedef struct pci_arbiter {
-       /* Pci Arbiter Registers */
-       union {
-               u32 acr;        /* Arbiter Control Register */
-               u32 asr;        /* Arbiter Status Register */
-       };
-} pciarb_t;
-
-/* Register read/write struct */
-typedef struct scm1 {
-       u32 mpr;                /* 0x00 Master Privilege Register */
-       u32 rsvd1[7];
-       u32 pacra;              /* 0x20 Peripheral Access Control Register A */
-       u32 pacrb;              /* 0x24 Peripheral Access Control Register B */
-       u32 pacrc;              /* 0x28 Peripheral Access Control Register C */
-       u32 pacrd;              /* 0x2C Peripheral Access Control Register D */
-       u32 rsvd2[4];
-       u32 pacre;              /* 0x40 Peripheral Access Control Register E */
-       u32 pacrf;              /* 0x44 Peripheral Access Control Register F */
-       u32 pacrg;              /* 0x48 Peripheral Access Control Register G */
-} scm1_t;
-
-typedef struct scm2 {
-       u8 rsvd1[19];           /* 0x00 - 0x12 */
-       u8 wcr;                 /* 0x13 */
-       u16 rsvd2;              /* 0x14 - 0x15 */
-       u16 cwcr;               /* 0x16 */
-       u8 rsvd3[3];            /* 0x18 - 0x1A */
-       u8 cwsr;                /* 0x1B */
-       u8 rsvd4[3];            /* 0x1C - 0x1E */
-       u8 scmisr;              /* 0x1F */
-       u32 rsvd5;              /* 0x20 - 0x23 */
-       u8 bcr;                 /* 0x24 */
-       u8 rsvd6[74];           /* 0x25 - 0x6F */
-       u32 cfadr;              /* 0x70 */
-       u8 rsvd7;               /* 0x74 */
-       u8 cfier;               /* 0x75 */
-       u8 cfloc;               /* 0x76 */
-       u8 cfatr;               /* 0x77 */
-       u32 rsvd8;              /* 0x78 - 0x7B */
-       u32 cfdtr;              /* 0x7C */
-} scm2_t;
-
-typedef struct rtcex {
-       u32 rsvd1[3];
-       u32 gocu;
-       u32 gocl;
-} rtcex_t;
-#endif                         /* __IMMAP_5445X__ */
diff --git a/arch/m68k/include/asm/m5445x.h b/arch/m68k/include/asm/m5445x.h
deleted file mode 100644 (file)
index 498c225..0000000
+++ /dev/null
@@ -1,888 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5445x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __MCF5445X__
-#define __MCF5445X__
-
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
-#define INT0_LO_RSVD0                  (0)
-#define INT0_LO_EPORT1                 (1)
-#define INT0_LO_EPORT2                 (2)
-#define INT0_LO_EPORT3                 (3)
-#define INT0_LO_EPORT4                 (4)
-#define INT0_LO_EPORT5                 (5)
-#define INT0_LO_EPORT6                 (6)
-#define INT0_LO_EPORT7                 (7)
-#define INT0_LO_EDMA_00                        (8)
-#define INT0_LO_EDMA_01                        (9)
-#define INT0_LO_EDMA_02                        (10)
-#define INT0_LO_EDMA_03                        (11)
-#define INT0_LO_EDMA_04                        (12)
-#define INT0_LO_EDMA_05                        (13)
-#define INT0_LO_EDMA_06                        (14)
-#define INT0_LO_EDMA_07                        (15)
-#define INT0_LO_EDMA_08                        (16)
-#define INT0_LO_EDMA_09                        (17)
-#define INT0_LO_EDMA_10                        (18)
-#define INT0_LO_EDMA_11                        (19)
-#define INT0_LO_EDMA_12                        (20)
-#define INT0_LO_EDMA_13                        (21)
-#define INT0_LO_EDMA_14                        (22)
-#define INT0_LO_EDMA_15                        (23)
-#define INT0_LO_EDMA_ERR               (24)
-#define INT0_LO_SCM                    (25)
-#define INT0_LO_UART0                  (26)
-#define INT0_LO_UART1                  (27)
-#define INT0_LO_UART2                  (28)
-#define INT0_LO_RSVD1                  (29)
-#define INT0_LO_I2C                    (30)
-#define INT0_LO_QSPI                   (31)
-#define INT0_HI_DTMR0                  (32)
-#define INT0_HI_DTMR1                  (33)
-#define INT0_HI_DTMR2                  (34)
-#define INT0_HI_DTMR3                  (35)
-#define INT0_HI_FEC0_TXF               (36)
-#define INT0_HI_FEC0_TXB               (37)
-#define INT0_HI_FEC0_UN                        (38)
-#define INT0_HI_FEC0_RL                        (39)
-#define INT0_HI_FEC0_RXF               (40)
-#define INT0_HI_FEC0_RXB               (41)
-#define INT0_HI_FEC0_MII               (42)
-#define INT0_HI_FEC0_LC                        (43)
-#define INT0_HI_FEC0_HBERR             (44)
-#define INT0_HI_FEC0_GRA               (45)
-#define INT0_HI_FEC0_EBERR             (46)
-#define INT0_HI_FEC0_BABT              (47)
-#define INT0_HI_FEC0_BABR              (48)
-#define INT0_HI_FEC1_TXF               (49)
-#define INT0_HI_FEC1_TXB               (50)
-#define INT0_HI_FEC1_UN                        (51)
-#define INT0_HI_FEC1_RL                        (52)
-#define INT0_HI_FEC1_RXF               (53)
-#define INT0_HI_FEC1_RXB               (54)
-#define INT0_HI_FEC1_MII               (55)
-#define INT0_HI_FEC1_LC                        (56)
-#define INT0_HI_FEC1_HBERR             (57)
-#define INT0_HI_FEC1_GRA               (58)
-#define INT0_HI_FEC1_EBERR             (59)
-#define INT0_HI_FEC1_BABT              (60)
-#define INT0_HI_FEC1_BABR              (61)
-#define INT0_HI_SCMIR                  (62)
-#define INT0_HI_RTC_ISR                        (63)
-
-#define INT1_HI_DSPI_EOQF              (33)
-#define INT1_HI_DSPI_TFFF              (34)
-#define INT1_HI_DSPI_TCF               (35)
-#define INT1_HI_DSPI_TFUF              (36)
-#define INT1_HI_DSPI_RFDF              (37)
-#define INT1_HI_DSPI_RFOF              (38)
-#define INT1_HI_DSPI_RFOF_TFUF         (39)
-#define INT1_HI_RNG_EI                 (40)
-#define INT1_HI_PIT0_PIF               (43)
-#define INT1_HI_PIT1_PIF               (44)
-#define INT1_HI_PIT2_PIF               (45)
-#define INT1_HI_PIT3_PIF               (46)
-#define INT1_HI_USBOTG_USBSTS          (47)
-#define INT1_HI_SSI_ISR                        (49)
-#define INT1_HI_CCM_UOCSR              (53)
-#define INT1_HI_ATA_ISR                        (54)
-#define INT1_HI_PCI_SCR                        (55)
-#define INT1_HI_PCI_ASR                        (56)
-#define INT1_HI_PLL_LOCKS              (57)
-
-/*********************************************************************
-* Watchdog Timer Modules (WTM)
-*********************************************************************/
-
-/* Bit definitions and macros for WCR */
-#define WTM_WCR_EN                     (0x0001)
-#define WTM_WCR_HALTED                 (0x0002)
-#define WTM_WCR_DOZE                   (0x0004)
-#define WTM_WCR_WAIT                   (0x0008)
-
-/*********************************************************************
-* Serial Boot Facility (SBF)
-*********************************************************************/
-
-/* Bit definitions and macros for SBFCR */
-#define SBF_SBFCR_BLDIV(x)             (((x)&0x000F))  /* Boot loader clock divider */
-#define SBF_SBFCR_FR                   (0x0010)        /* Fast read */
-
-/*********************************************************************
-* Reset Controller Module (RCM)
-*********************************************************************/
-
-/* Bit definitions and macros for RCR */
-#define RCM_RCR_FRCRSTOUT              (0x40)
-#define RCM_RCR_SOFTRST                        (0x80)
-
-/* Bit definitions and macros for RSR */
-#define RCM_RSR_LOL                    (0x01)
-#define RCM_RSR_WDR_CORE               (0x02)
-#define RCM_RSR_EXT                    (0x04)
-#define RCM_RSR_POR                    (0x08)
-#define RCM_RSR_SOFT                   (0x20)
-
-/*********************************************************************
-* Chip Configuration Module (CCM)
-*********************************************************************/
-
-/* Bit definitions and macros for CCR_360 */
-#define CCM_CCR_360_PLLMULT2(x)                (((x)&0x0003))  /* 2-Bit PLL clock mode */
-#define CCM_CCR_360_PCISLEW            (0x0004)        /* PCI pad slew rate mode */
-#define CCM_CCR_360_PCIMODE            (0x0008)        /* PCI host/agent mode */
-#define CCM_CCR_360_PLLMODE            (0x0010)        /* PLL Mode */
-#define CCM_CCR_360_FBCONFIG(x)                (((x)&0x0007)<<5)       /* Flexbus/PCI port size configuration */
-#define CCM_CCR_360_PLLMULT3(x)                (((x)&0x0007))  /* 3-Bit PLL Clock Mode */
-#define CCM_CCR_360_OSCMODE            (0x0008)        /* Oscillator Clock Mode */
-#define CCM_CCR_360_FBCONFIG_MASK      (0x00E0)
-#define CCM_CCR_360_PLLMULT2_MASK      (0x0003)
-#define CCM_CCR_360_PLLMULT3_MASK      (0x0007)
-#define CCM_CCR_360_FBCONFIG_NM_NP_32  (0x0000)
-#define CCM_CCR_360_FBCONFIG_NM_NP_8   (0x0020)
-#define CCM_CCR_360_FBCONFIG_NM_NP_16  (0x0040)
-#define CCM_CCR_360_FBCONFIG_M_P_16    (0x0060)
-#define CCM_CCR_360_FBCONFIG_M_NP_32   (0x0080)
-#define CCM_CCR_360_FBCONFIG_M_NP_8    (0x00A0)
-#define CCM_CCR_360_FBCONFIG_M_NP_16   (0x00C0)
-#define CCM_CCR_360_FBCONFIG_M_P_8     (0x00E0)
-#define CCM_CCR_360_PLLMULT2_12X       (0x0000)
-#define CCM_CCR_360_PLLMULT2_6X                (0x0001)
-#define CCM_CCR_360_PLLMULT2_16X       (0x0002)
-#define CCM_CCR_360_PLLMULT2_8X                (0x0003)
-#define CCM_CCR_360_PLLMULT3_20X       (0x0000)
-#define CCM_CCR_360_PLLMULT3_10X       (0x0001)
-#define CCM_CCR_360_PLLMULT3_24X       (0x0002)
-#define CCM_CCR_360_PLLMULT3_18X       (0x0003)
-#define CCM_CCR_360_PLLMULT3_12X       (0x0004)
-#define CCM_CCR_360_PLLMULT3_6X                (0x0005)
-#define CCM_CCR_360_PLLMULT3_16X       (0x0006)
-#define CCM_CCR_360_PLLMULT3_8X                (0x0007)
-
-/* Bit definitions and macros for CCR_256 */
-#define CCM_CCR_256_PLLMULT3(x)                (((x)&0x0007))  /* 3-Bit PLL clock mode */
-#define CCM_CCR_256_OSCMODE            (0x0008)        /* Oscillator clock mode */
-#define CCM_CCR_256_PLLMODE            (0x0010)        /* PLL Mode */
-#define CCM_CCR_256_FBCONFIG(x)                (((x)&0x0007)<<5)       /* Flexbus/PCI port size configuration */
-#define CCM_CCR_256_FBCONFIG_MASK      (0x00E0)
-#define CCM_CCR_256_FBCONFIG_NM_32     (0x0000)
-#define CCM_CCR_256_FBCONFIG_NM_8      (0x0020)
-#define CCM_CCR_256_FBCONFIG_NM_16     (0x0040)
-#define CCM_CCR_256_FBCONFIG_M_32      (0x0080)
-#define CCM_CCR_256_FBCONFIG_M_8       (0x00A0)
-#define CCM_CCR_256_FBCONFIG_M_16      (0x00C0)
-#define CCM_CCR_256_PLLMULT3_MASK      (0x0007)
-#define CCM_CCR_256_PLLMULT3_20X       (0x0000)
-#define CCM_CCR_256_PLLMULT3_10X       (0x0001)
-#define CCM_CCR_256_PLLMULT3_24X       (0x0002)
-#define CCM_CCR_256_PLLMULT3_18X       (0x0003)
-#define CCM_CCR_256_PLLMULT3_12X       (0x0004)
-#define CCM_CCR_256_PLLMULT3_6X                (0x0005)
-#define CCM_CCR_256_PLLMULT3_16X       (0x0006)
-#define CCM_CCR_256_PLLMULT3_8X                (0x0007)
-
-/* Bit definitions and macros for RCON_360 */
-#define CCM_RCON_360_PLLMULT(x)                (((x)&0x0003))  /* PLL clock mode */
-#define CCM_RCON_360_PCISLEW           (0x0004)        /* PCI pad slew rate mode */
-#define CCM_RCON_360_PCIMODE           (0x0008)        /* PCI host/agent mode */
-#define CCM_RCON_360_PLLMODE           (0x0010)        /* PLL Mode */
-#define CCM_RCON_360_FBCONFIG(x)       (((x)&0x0007)<<5)       /* Flexbus/PCI port size configuration */
-
-/* Bit definitions and macros for RCON_256 */
-#define CCM_RCON_256_PLLMULT(x)                (((x)&0x0007))  /* PLL clock mode */
-#define CCM_RCON_256_OSCMODE           (0x0008)        /* Oscillator clock mode */
-#define CCM_RCON_256_PLLMODE           (0x0010)        /* PLL Mode */
-#define CCM_RCON_256_FBCONFIG(x)       (((x)&0x0007)<<5)       /* Flexbus/PCI port size configuration */
-
-/* Bit definitions and macros for CIR */
-#define CCM_CIR_PRN(x)                 (((x)&0x003F))  /* Part revision number */
-#define CCM_CIR_PIN(x)                 (((x)&0x03FF)<<6)       /* Part identification number */
-#define CCM_CIR_PIN_MASK               (0xFFC0)
-#define CCM_CIR_PRN_MASK               (0x003F)
-#define CCM_CIR_PIN_MCF54450           (0x4F<<6)
-#define CCM_CIR_PIN_MCF54451           (0x4D<<6)
-#define CCM_CIR_PIN_MCF54452           (0x4B<<6)
-#define CCM_CIR_PIN_MCF54453           (0x49<<6)
-#define CCM_CIR_PIN_MCF54454           (0x4A<<6)
-#define CCM_CIR_PIN_MCF54455           (0x48<<6)
-
-/* Bit definitions and macros for MISCCR */
-#define CCM_MISCCR_USBSRC              (0x0001)        /* USB clock source */
-#define CCM_MISCCR_USBOC               (0x0002)        /* USB VBUS over-current sense polarity */
-#define CCM_MISCCR_USBPUE              (0x0004)        /* USB transceiver pull-up enable */
-#define CCM_MISCCR_SSISRC              (0x0010)        /* SSI clock source */
-#define CCM_MISCCR_TIMDMA              (0x0020)        /* Timer DMA mux selection */
-#define CCM_MISCCR_SSIPUS              (0x0040)        /* SSI RXD/TXD pull select */
-#define CCM_MISCCR_SSIPUE              (0x0080)        /* SSI RXD/TXD pull enable */
-#define CCM_MISCCR_BMT(x)              (((x)&0x0007)<<8)       /* Bus monitor timing field */
-#define CCM_MISCCR_BME                 (0x0800)        /* Bus monitor external enable bit */
-#define CCM_MISCCR_LIMP                        (0x1000)        /* Limp mode enable */
-#define CCM_MISCCR_BMT_65536           (0)
-#define CCM_MISCCR_BMT_32768           (1)
-#define CCM_MISCCR_BMT_16384           (2)
-#define CCM_MISCCR_BMT_8192            (3)
-#define CCM_MISCCR_BMT_4096            (4)
-#define CCM_MISCCR_BMT_2048            (5)
-#define CCM_MISCCR_BMT_1024            (6)
-#define CCM_MISCCR_BMT_512             (7)
-#define CCM_MISCCR_SSIPUS_UP           (1)
-#define CCM_MISCCR_SSIPUS_DOWN         (0)
-#define CCM_MISCCR_TIMDMA_TIM          (1)
-#define CCM_MISCCR_TIMDMA_SSI          (0)
-#define CCM_MISCCR_SSISRC_CLKIN                (0)
-#define CCM_MISCCR_SSISRC_PLL          (1)
-#define CCM_MISCCR_USBOC_ACTHI         (0)
-#define CCM_MISCCR_USBOV_ACTLO         (1)
-#define CCM_MISCCR_USBSRC_CLKIN                (0)
-#define CCM_MISCCR_USBSRC_PLL          (1)
-
-/* Bit definitions and macros for CDR */
-#define CCM_CDR_SSIDIV(x)              (((x)&0x00FF))  /* SSI oversampling clock divider */
-#define CCM_CDR_LPDIV(x)               (((x)&0x000F)<<8)       /* Low power clock divider */
-
-/* Bit definitions and macros for UOCSR */
-#define CCM_UOCSR_XPDE                 (0x0001)        /* On-chip transceiver pull-down enable */
-#define CCM_UOCSR_UOMIE                        (0x0002)        /* USB OTG misc interrupt enable */
-#define CCM_UOCSR_WKUP                 (0x0004)        /* USB OTG controller wake-up event */
-#define CCM_UOCSR_PWRFLT               (0x0008)        /* VBUS power fault */
-#define CCM_UOCSR_SEND                 (0x0010)        /* Session end */
-#define CCM_UOCSR_VVLD                 (0x0020)        /* VBUS valid indicator */
-#define CCM_UOCSR_BVLD                 (0x0040)        /* B-peripheral valid indicator */
-#define CCM_UOCSR_AVLD                 (0x0080)        /* A-peripheral valid indicator */
-#define CCM_UOCSR_DPPU                 (0x0100)        /* D+ pull-up for FS enabled (read-only) */
-#define CCM_UOCSR_DCR_VBUS             (0x0200)        /* VBUS discharge resistor enabled (read-only) */
-#define CCM_UOCSR_CRG_VBUS             (0x0400)        /* VBUS charge resistor enabled (read-only) */
-#define CCM_UOCSR_DMPD                 (0x1000)        /* D- 15Kohm pull-down (read-only) */
-#define CCM_UOCSR_DPPD                 (0x2000)        /* D+ 15Kohm pull-down (read-only) */
-
-/*********************************************************************
-* General Purpose I/O Module (GPIO)
-*********************************************************************/
-
-/* Bit definitions and macros for PAR_FEC */
-#define GPIO_PAR_FEC_FEC0(x)           (((x)&0x07))
-#define GPIO_PAR_FEC_FEC1(x)           (((x)&0x07)<<4)
-#define GPIO_PAR_FEC_FEC1_UNMASK       (0x8F)
-#define GPIO_PAR_FEC_FEC1_MII          (0x70)
-#define GPIO_PAR_FEC_FEC1_RMII_GPIO    (0x30)
-#define GPIO_PAR_FEC_FEC1_RMII_ATA     (0x20)
-#define GPIO_PAR_FEC_FEC1_ATA          (0x10)
-#define GPIO_PAR_FEC_FEC1_GPIO         (0x00)
-#define GPIO_PAR_FEC_FEC0_UNMASK       (0xF8)
-#define GPIO_PAR_FEC_FEC0_MII          (0x07)
-#define GPIO_PAR_FEC_FEC0_RMII_GPIO    (0x03)
-#define GPIO_PAR_FEC_FEC0_RMII_ULPI    (0x02)
-#define GPIO_PAR_FEC_FEC0_ULPI         (0x01)
-#define GPIO_PAR_FEC_FEC0_GPIO         (0x00)
-
-/* Bit definitions and macros for PAR_DMA */
-#define GPIO_PAR_DMA_DREQ0             (0x01)
-#define GPIO_PAR_DMA_DACK0(x)          (((x)&0x03)<<2)
-#define GPIO_PAR_DMA_DREQ1(x)          (((x)&0x03)<<4)
-#define GPIO_PAR_DMA_DACK1(x)          (((x)&0x03)<<6)
-#define GPIO_PAR_DMA_DACK1_UNMASK      (0x3F)
-#define GPIO_PAR_DMA_DACK1_DACK1       (0xC0)
-#define GPIO_PAR_DMA_DACK1_ULPI_DIR    (0x40)
-#define GPIO_PAR_DMA_DACK1_GPIO                (0x00)
-#define GPIO_PAR_DMA_DREQ1_UNMASK      (0xCF)
-#define GPIO_PAR_DMA_DREQ1_DREQ1       (0x30)
-#define GPIO_PAR_DMA_DREQ1_USB_CLKIN   (0x10)
-#define GPIO_PAR_DMA_DREQ1_GPIO                (0x00)
-#define GPIO_PAR_DMA_DACK0_UNMASK      (0xF3)
-#define GPIO_PAR_DMA_DACK0_DACK1       (0x0C)
-#define GPIO_PAR_DMA_DACK0_PCS3                (0x08)
-#define GPIO_PAR_DMA_DACK0_ULPI_DIR    (0x04)
-#define GPIO_PAR_DMA_DACK0_GPIO                (0x00)
-#define GPIO_PAR_DMA_DREQ0_DREQ0       (0x01)
-#define GPIO_PAR_DMA_DREQ0_GPIO                (0x00)
-
-/* Bit definitions and macros for PAR_FBCTL */
-#define GPIO_PAR_FBCTL_TS(x)           (((x)&0x03)<<3)
-#define GPIO_PAR_FBCTL_RW              (0x20)
-#define GPIO_PAR_FBCTL_TA              (0x40)
-#define GPIO_PAR_FBCTL_OE              (0x80)
-#define GPIO_PAR_FBCTL_OE_OE           (0x80)
-#define GPIO_PAR_FBCTL_OE_GPIO         (0x00)
-#define GPIO_PAR_FBCTL_TA_TA           (0x40)
-#define GPIO_PAR_FBCTL_TA_GPIO         (0x00)
-#define GPIO_PAR_FBCTL_RW_RW           (0x20)
-#define GPIO_PAR_FBCTL_RW_GPIO         (0x00)
-#define GPIO_PAR_FBCTL_TS_UNMASK       (0xE7)
-#define GPIO_PAR_FBCTL_TS_TS           (0x18)
-#define GPIO_PAR_FBCTL_TS_ALE          (0x10)
-#define GPIO_PAR_FBCTL_TS_TBST         (0x08)
-#define GPIO_PAR_FBCTL_TS_GPIO         (0x80)
-
-/* Bit definitions and macros for PAR_DSPI */
-#define GPIO_PAR_DSPI_SCK              (0x01)
-#define GPIO_PAR_DSPI_SOUT             (0x02)
-#define GPIO_PAR_DSPI_SIN              (0x04)
-#define GPIO_PAR_DSPI_PCS0             (0x08)
-#define GPIO_PAR_DSPI_PCS1             (0x10)
-#define GPIO_PAR_DSPI_PCS2             (0x20)
-#define GPIO_PAR_DSPI_PCS5             (0x40)
-#define GPIO_PAR_DSPI_PCS5_PCS5                (0x40)
-#define GPIO_PAR_DSPI_PCS5_GPIO                (0x00)
-#define GPIO_PAR_DSPI_PCS2_PCS2                (0x20)
-#define GPIO_PAR_DSPI_PCS2_GPIO                (0x00)
-#define GPIO_PAR_DSPI_PCS1_PCS1                (0x10)
-#define GPIO_PAR_DSPI_PCS1_GPIO                (0x00)
-#define GPIO_PAR_DSPI_PCS0_PCS0                (0x08)
-#define GPIO_PAR_DSPI_PCS0_GPIO                (0x00)
-#define GPIO_PAR_DSPI_SIN_SIN          (0x04)
-#define GPIO_PAR_DSPI_SIN_GPIO         (0x00)
-#define GPIO_PAR_DSPI_SOUT_SOUT                (0x02)
-#define GPIO_PAR_DSPI_SOUT_GPIO                (0x00)
-#define GPIO_PAR_DSPI_SCK_SCK          (0x01)
-#define GPIO_PAR_DSPI_SCK_GPIO         (0x00)
-
-/* Bit definitions and macros for PAR_BE */
-#define GPIO_PAR_BE_BS0                        (0x01)
-#define GPIO_PAR_BE_BS1                        (0x04)
-#define GPIO_PAR_BE_BS2(x)             (((x)&0x03)<<4)
-#define GPIO_PAR_BE_BS3(x)             (((x)&0x03)<<6)
-#define GPIO_PAR_BE_BE3_UNMASK         (0x3F)
-#define GPIO_PAR_BE_BE3_BE3            (0xC0)
-#define GPIO_PAR_BE_BE3_TSIZ1          (0x80)
-#define GPIO_PAR_BE_BE3_GPIO           (0x00)
-#define GPIO_PAR_BE_BE2_UNMASK         (0xCF)
-#define GPIO_PAR_BE_BE2_BE2            (0x30)
-#define GPIO_PAR_BE_BE2_TSIZ0          (0x20)
-#define GPIO_PAR_BE_BE2_GPIO           (0x00)
-#define GPIO_PAR_BE_BE1_BE1            (0x04)
-#define GPIO_PAR_BE_BE1_GPIO           (0x00)
-#define GPIO_PAR_BE_BE0_BE0            (0x01)
-#define GPIO_PAR_BE_BE0_GPIO           (0x00)
-
-/* Bit definitions and macros for PAR_CS */
-#define GPIO_PAR_CS_CS1                        (0x02)
-#define GPIO_PAR_CS_CS2                        (0x04)
-#define GPIO_PAR_CS_CS3                        (0x08)
-#define GPIO_PAR_CS_CS3_CS3            (0x08)
-#define GPIO_PAR_CS_CS3_GPIO           (0x00)
-#define GPIO_PAR_CS_CS2_CS2            (0x04)
-#define GPIO_PAR_CS_CS2_GPIO           (0x00)
-#define GPIO_PAR_CS_CS1_CS1            (0x02)
-#define GPIO_PAR_CS_CS1_GPIO           (0x00)
-
-/* Bit definitions and macros for PAR_TIMER */
-#define GPIO_PAR_TIMER_T0IN(x)         (((x)&0x03))
-#define GPIO_PAR_TIMER_T1IN(x)         (((x)&0x03)<<2)
-#define GPIO_PAR_TIMER_T2IN(x)         (((x)&0x03)<<4)
-#define GPIO_PAR_TIMER_T3IN(x)         (((x)&0x03)<<6)
-#define GPIO_PAR_TIMER_T3IN_UNMASK     (0x3F)
-#define GPIO_PAR_TIMER_T3IN_T3IN       (0xC0)
-#define GPIO_PAR_TIMER_T3IN_T3OUT      (0x80)
-#define GPIO_PAR_TIMER_T3IN_U2RXD      (0x40)
-#define GPIO_PAR_TIMER_T3IN_GPIO       (0x00)
-#define GPIO_PAR_TIMER_T2IN_UNMASK     (0xCF)
-#define GPIO_PAR_TIMER_T2IN_T2IN       (0x30)
-#define GPIO_PAR_TIMER_T2IN_T2OUT      (0x20)
-#define GPIO_PAR_TIMER_T2IN_U2TXD      (0x10)
-#define GPIO_PAR_TIMER_T2IN_GPIO       (0x00)
-#define GPIO_PAR_TIMER_T1IN_UNMASK     (0xF3)
-#define GPIO_PAR_TIMER_T1IN_T1IN       (0x0C)
-#define GPIO_PAR_TIMER_T1IN_T1OUT      (0x08)
-#define GPIO_PAR_TIMER_T1IN_U2CTS      (0x04)
-#define GPIO_PAR_TIMER_T1IN_GPIO       (0x00)
-#define GPIO_PAR_TIMER_T0IN_UNMASK     (0xFC)
-#define GPIO_PAR_TIMER_T0IN_T0IN       (0x03)
-#define GPIO_PAR_TIMER_T0IN_T0OUT      (0x02)
-#define GPIO_PAR_TIMER_T0IN_U2RTS      (0x01)
-#define GPIO_PAR_TIMER_T0IN_GPIO       (0x00)
-
-/* Bit definitions and macros for PAR_USB */
-#define GPIO_PAR_USB_VBUSOC(x)         (((x)&0x03))
-#define GPIO_PAR_USB_VBUSEN(x)         (((x)&0x03)<<2)
-#define GPIO_PAR_USB_VBUSEN_UNMASK     (0xF3)
-#define GPIO_PAR_USB_VBUSEN_VBUSEN     (0x0C)
-#define GPIO_PAR_USB_VBUSEN_USBPULLUP  (0x08)
-#define GPIO_PAR_USB_VBUSEN_ULPI_NXT   (0x04)
-#define GPIO_PAR_USB_VBUSEN_GPIO       (0x00)
-#define GPIO_PAR_USB_VBUSOC_UNMASK     (0xFC)
-#define GPIO_PAR_USB_VBUSOC_VBUSOC     (0x03)
-#define GPIO_PAR_USB_VBUSOC_ULPI_STP   (0x01)
-#define GPIO_PAR_USB_VBUSOC_GPIO       (0x00)
-
-/* Bit definitions and macros for PAR_UART */
-#define GPIO_PAR_UART_U0TXD            (0x01)
-#define GPIO_PAR_UART_U0RXD            (0x02)
-#define GPIO_PAR_UART_U0RTS            (0x04)
-#define GPIO_PAR_UART_U0CTS            (0x08)
-#define GPIO_PAR_UART_U1TXD            (0x10)
-#define GPIO_PAR_UART_U1RXD            (0x20)
-#define GPIO_PAR_UART_U1RTS            (0x40)
-#define GPIO_PAR_UART_U1CTS            (0x80)
-#define GPIO_PAR_UART_U1CTS_U1CTS      (0x80)
-#define GPIO_PAR_UART_U1CTS_GPIO       (0x00)
-#define GPIO_PAR_UART_U1RTS_U1RTS      (0x40)
-#define GPIO_PAR_UART_U1RTS_GPIO       (0x00)
-#define GPIO_PAR_UART_U1RXD_U1RXD      (0x20)
-#define GPIO_PAR_UART_U1RXD_GPIO       (0x00)
-#define GPIO_PAR_UART_U1TXD_U1TXD      (0x10)
-#define GPIO_PAR_UART_U1TXD_GPIO       (0x00)
-#define GPIO_PAR_UART_U0CTS_U0CTS      (0x08)
-#define GPIO_PAR_UART_U0CTS_GPIO       (0x00)
-#define GPIO_PAR_UART_U0RTS_U0RTS      (0x04)
-#define GPIO_PAR_UART_U0RTS_GPIO       (0x00)
-#define GPIO_PAR_UART_U0RXD_U0RXD      (0x02)
-#define GPIO_PAR_UART_U0RXD_GPIO       (0x00)
-#define GPIO_PAR_UART_U0TXD_U0TXD      (0x01)
-#define GPIO_PAR_UART_U0TXD_GPIO       (0x00)
-
-/* Bit definitions and macros for PAR_FECI2C */
-#define GPIO_PAR_FECI2C_SDA(x)         (((x)&0x0003))
-#define GPIO_PAR_FECI2C_SCL(x)         (((x)&0x0003)<<2)
-#define GPIO_PAR_FECI2C_MDIO0          (0x0010)
-#define GPIO_PAR_FECI2C_MDC0           (0x0040)
-#define GPIO_PAR_FECI2C_MDIO1(x)       (((x)&0x0003)<<8)
-#define GPIO_PAR_FECI2C_MDC1(x)                (((x)&0x0003)<<10)
-#define GPIO_PAR_FECI2C_MDC1_UNMASK    (0xF3FF)
-#define GPIO_PAR_FECI2C_MDC1_MDC1      (0x0C00)
-#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR  (0x0800)
-#define GPIO_PAR_FECI2C_MDC1_GPIO      (0x0000)
-#define GPIO_PAR_FECI2C_MDIO1_UNMASK   (0xFCFF)
-#define GPIO_PAR_FECI2C_MDIO1_MDIO1    (0x0300)
-#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200)
-#define GPIO_PAR_FECI2C_MDIO1_GPIO     (0x0000)
-#define GPIO_PAR_FECI2C_MDC0_MDC0      (0x0040)
-#define GPIO_PAR_FECI2C_MDC0_GPIO      (0x0000)
-#define GPIO_PAR_FECI2C_MDIO0_MDIO0    (0x0010)
-#define GPIO_PAR_FECI2C_MDIO0_GPIO     (0x0000)
-#define GPIO_PAR_FECI2C_SCL_UNMASK     (0xFFF3)
-#define GPIO_PAR_FECI2C_SCL_SCL                (0x000C)
-#define GPIO_PAR_FECI2C_SCL_U2TXD      (0x0004)
-#define GPIO_PAR_FECI2C_SCL_GPIO       (0x0000)
-#define GPIO_PAR_FECI2C_SDA_UNMASK     (0xFFFC)
-#define GPIO_PAR_FECI2C_SDA_SDA                (0x0003)
-#define GPIO_PAR_FECI2C_SDA_U2RXD      (0x0001)
-#define GPIO_PAR_FECI2C_SDA_GPIO       (0x0000)
-
-/* Bit definitions and macros for PAR_SSI */
-#define GPIO_PAR_SSI_MCLK              (0x0001)
-#define GPIO_PAR_SSI_STXD(x)           (((x)&0x0003)<<2)
-#define GPIO_PAR_SSI_SRXD(x)           (((x)&0x0003)<<4)
-#define GPIO_PAR_SSI_FS(x)             (((x)&0x0003)<<6)
-#define GPIO_PAR_SSI_BCLK(x)           (((x)&0x0003)<<8)
-#define GPIO_PAR_SSI_BCLK_UNMASK       (0xFCFF)
-#define GPIO_PAR_SSI_BCLK_BCLK         (0x0300)
-#define GPIO_PAR_SSI_BCLK_U1CTS                (0x0200)
-#define GPIO_PAR_SSI_BCLK_GPIO         (0x0000)
-#define GPIO_PAR_SSI_FS_UNMASK         (0xFF3F)
-#define GPIO_PAR_SSI_FS_FS             (0x00C0)
-#define GPIO_PAR_SSI_FS_U1RTS          (0x0080)
-#define GPIO_PAR_SSI_FS_GPIO           (0x0000)
-#define GPIO_PAR_SSI_SRXD_UNMASK       (0xFFCF)
-#define GPIO_PAR_SSI_SRXD_SRXD         (0x0030)
-#define GPIO_PAR_SSI_SRXD_U1RXD                (0x0020)
-#define GPIO_PAR_SSI_SRXD_GPIO         (0x0000)
-#define GPIO_PAR_SSI_STXD_UNMASK       (0xFFF3)
-#define GPIO_PAR_SSI_STXD_STXD         (0x000C)
-#define GPIO_PAR_SSI_STXD_U1TXD                (0x0008)
-#define GPIO_PAR_SSI_STXD_GPIO         (0x0000)
-#define GPIO_PAR_SSI_MCLK_MCLK         (0x0001)
-#define GPIO_PAR_SSI_MCLK_GPIO         (0x0000)
-
-/* Bit definitions and macros for PAR_ATA */
-#define GPIO_PAR_ATA_IORDY             (0x0001)
-#define GPIO_PAR_ATA_DMARQ             (0x0002)
-#define GPIO_PAR_ATA_RESET             (0x0004)
-#define GPIO_PAR_ATA_DA0               (0x0020)
-#define GPIO_PAR_ATA_DA1               (0x0040)
-#define GPIO_PAR_ATA_DA2               (0x0080)
-#define GPIO_PAR_ATA_CS0               (0x0100)
-#define GPIO_PAR_ATA_CS1               (0x0200)
-#define GPIO_PAR_ATA_BUFEN             (0x0400)
-#define GPIO_PAR_ATA_BUFEN_BUFEN       (0x0400)
-#define GPIO_PAR_ATA_BUFEN_GPIO                (0x0000)
-#define GPIO_PAR_ATA_CS1_CS1           (0x0200)
-#define GPIO_PAR_ATA_CS1_GPIO          (0x0000)
-#define GPIO_PAR_ATA_CS0_CS0           (0x0100)
-#define GPIO_PAR_ATA_CS0_GPIO          (0x0000)
-#define GPIO_PAR_ATA_DA2_DA2           (0x0080)
-#define GPIO_PAR_ATA_DA2_GPIO          (0x0000)
-#define GPIO_PAR_ATA_DA1_DA1           (0x0040)
-#define GPIO_PAR_ATA_DA1_GPIO          (0x0000)
-#define GPIO_PAR_ATA_DA0_DA0           (0x0020)
-#define GPIO_PAR_ATA_DA0_GPIO          (0x0000)
-#define GPIO_PAR_ATA_RESET_RESET       (0x0004)
-#define GPIO_PAR_ATA_RESET_GPIO                (0x0000)
-#define GPIO_PAR_ATA_DMARQ_DMARQ       (0x0002)
-#define GPIO_PAR_ATA_DMARQ_GPIO                (0x0000)
-#define GPIO_PAR_ATA_IORDY_IORDY       (0x0001)
-#define GPIO_PAR_ATA_IORDY_GPIO                (0x0000)
-
-/* Bit definitions and macros for PAR_IRQ */
-#define GPIO_PAR_IRQ_IRQ1              (0x02)
-#define GPIO_PAR_IRQ_IRQ4              (0x10)
-#define GPIO_PAR_IRQ_IRQ4_IRQ4         (0x10)
-#define GPIO_PAR_IRQ_IRQ4_GPIO         (0x00)
-#define GPIO_PAR_IRQ_IRQ1_IRQ1         (0x02)
-#define GPIO_PAR_IRQ_IRQ1_GPIO         (0x00)
-
-/* Bit definitions and macros for PAR_PCI */
-#define GPIO_PAR_PCI_REQ0              (0x0001)
-#define GPIO_PAR_PCI_REQ1              (0x0004)
-#define GPIO_PAR_PCI_REQ2              (0x0010)
-#define GPIO_PAR_PCI_REQ3(x)           (((x)&0x0003)<<6)
-#define GPIO_PAR_PCI_GNT0              (0x0100)
-#define GPIO_PAR_PCI_GNT1              (0x0400)
-#define GPIO_PAR_PCI_GNT2              (0x1000)
-#define GPIO_PAR_PCI_GNT3(x)           (((x)&0x0003)<<14)
-#define GPIO_PAR_PCI_GNT3_UNMASK       (0x3FFF)
-#define GPIO_PAR_PCI_GNT3_GNT3         (0xC000)
-#define GPIO_PAR_PCI_GNT3_ATA_DMACK    (0x8000)
-#define GPIO_PAR_PCI_GNT3_GPIO         (0x0000)
-#define GPIO_PAR_PCI_GNT2_GNT2         (0x1000)
-#define GPIO_PAR_PCI_GNT2_GPIO         (0x0000)
-#define GPIO_PAR_PCI_GNT1_GNT1         (0x0400)
-#define GPIO_PAR_PCI_GNT1_GPIO         (0x0000)
-#define GPIO_PAR_PCI_GNT0_GNT0         (0x0100)
-#define GPIO_PAR_PCI_GNT0_GPIO         (0x0000)
-#define GPIO_PAR_PCI_REQ3_UNMASK       (0xFF3F)
-#define GPIO_PAR_PCI_REQ3_REQ3         (0x00C0)
-#define GPIO_PAR_PCI_REQ3_ATA_INTRQ    (0x0080)
-#define GPIO_PAR_PCI_REQ3_GPIO         (0x0000)
-#define GPIO_PAR_PCI_REQ2_REQ2         (0x0010)
-#define GPIO_PAR_PCI_REQ2_GPIO         (0x0000)
-#define GPIO_PAR_PCI_REQ1_REQ1         (0x0040)
-#define GPIO_PAR_PCI_REQ1_GPIO         (0x0000)
-#define GPIO_PAR_PCI_REQ0_REQ0         (0x0001)
-#define GPIO_PAR_PCI_REQ0_GPIO         (0x0000)
-
-/* Bit definitions and macros for MSCR_SDRAM */
-#define GPIO_MSCR_SDRAM_SDCTL(x)       (((x)&0x03))
-#define GPIO_MSCR_SDRAM_SDCLK(x)       (((x)&0x03)<<2)
-#define GPIO_MSCR_SDRAM_SDDQS(x)       (((x)&0x03)<<4)
-#define GPIO_MSCR_SDRAM_SDDATA(x)      (((x)&0x03)<<6)
-#define GPIO_MSCR_SDRAM_SDDATA_UNMASK  (0x3F)
-#define GPIO_MSCR_SDRAM_SDDATA_DDR1    (0xC0)
-#define GPIO_MSCR_SDRAM_SDDATA_DDR2    (0x80)
-#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR        (0x40)
-#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR        (0x00)
-#define GPIO_MSCR_SDRAM_SDDQS_UNMASK   (0xCF)
-#define GPIO_MSCR_SDRAM_SDDQS_DDR1     (0x30)
-#define GPIO_MSCR_SDRAM_SDDQS_DDR2     (0x20)
-#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10)
-#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00)
-#define GPIO_MSCR_SDRAM_SDCLK_UNMASK   (0xF3)
-#define GPIO_MSCR_SDRAM_SDCLK_DDR1     (0x0C)
-#define GPIO_MSCR_SDRAM_SDCLK_DDR2     (0x08)
-#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04)
-#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00)
-#define GPIO_MSCR_SDRAM_SDCTL_UNMASK   (0xFC)
-#define GPIO_MSCR_SDRAM_SDCTL_DDR1     (0x03)
-#define GPIO_MSCR_SDRAM_SDCTL_DDR2     (0x02)
-#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01)
-#define GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00)
-
-/* Bit definitions and macros for MSCR_PCI */
-#define GPIO_MSCR_PCI_PCI              (0x01)
-#define GPIO_MSCR_PCI_PCI_HI_66MHZ     (0x01)
-#define GPIO_MSCR_PCI_PCI_LO_33MHZ     (0x00)
-
-/* Bit definitions and macros for DSCR_I2C */
-#define GPIO_DSCR_I2C_I2C(x)           (((x)&0x03))
-#define GPIO_DSCR_I2C_I2C_LOAD_50PF    (0x03)
-#define GPIO_DSCR_I2C_I2C_LOAD_30PF    (0x02)
-#define GPIO_DSCR_I2C_I2C_LOAD_20PF    (0x01)
-#define GPIO_DSCR_I2C_I2C_LOAD_10PF    (0x00)
-
-/* Bit definitions and macros for DSCR_FLEXBUS */
-#define GPIO_DSCR_FLEXBUS_FBADL(x)             (((x)&0x03))
-#define GPIO_DSCR_FLEXBUS_FBADH(x)             (((x)&0x03)<<2)
-#define GPIO_DSCR_FLEXBUS_FBCTL(x)             (((x)&0x03)<<4)
-#define GPIO_DSCR_FLEXBUS_FBCLK(x)             (((x)&0x03)<<6)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF      (0xC0)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30PF      (0x80)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF      (0x40)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF      (0x00)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF      (0x30)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF      (0x20)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF      (0x10)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF      (0x00)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF      (0x0C)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF      (0x08)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF      (0x04)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF      (0x00)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF      (0x03)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF      (0x02)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF      (0x01)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF      (0x00)
-
-/* Bit definitions and macros for DSCR_FEC */
-#define GPIO_DSCR_FEC_FEC0(x)          (((x)&0x03))
-#define GPIO_DSCR_FEC_FEC1(x)          (((x)&0x03)<<2)
-#define GPIO_DSCR_FEC_FEC1_LOAD_50PF   (0x0C)
-#define GPIO_DSCR_FEC_FEC1_LOAD_30PF   (0x08)
-#define GPIO_DSCR_FEC_FEC1_LOAD_20PF   (0x04)
-#define GPIO_DSCR_FEC_FEC1_LOAD_10PF   (0x00)
-#define GPIO_DSCR_FEC_FEC0_LOAD_50PF   (0x03)
-#define GPIO_DSCR_FEC_FEC0_LOAD_30PF   (0x02)
-#define GPIO_DSCR_FEC_FEC0_LOAD_20PF   (0x01)
-#define GPIO_DSCR_FEC_FEC0_LOAD_10PF   (0x00)
-
-/* Bit definitions and macros for DSCR_UART */
-#define GPIO_DSCR_UART_UART0(x)                (((x)&0x03))
-#define GPIO_DSCR_UART_UART1(x)                (((x)&0x03)<<2)
-#define GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C)
-#define GPIO_DSCR_UART_UART1_LOAD_30PF (0x08)
-#define GPIO_DSCR_UART_UART1_LOAD_20PF (0x04)
-#define GPIO_DSCR_UART_UART1_LOAD_10PF (0x00)
-#define GPIO_DSCR_UART_UART0_LOAD_50PF (0x03)
-#define GPIO_DSCR_UART_UART0_LOAD_30PF (0x02)
-#define GPIO_DSCR_UART_UART0_LOAD_20PF (0x01)
-#define GPIO_DSCR_UART_UART0_LOAD_10PF (0x00)
-
-/* Bit definitions and macros for DSCR_DSPI */
-#define GPIO_DSCR_DSPI_DSPI(x)         (((x)&0x03))
-#define GPIO_DSCR_DSPI_DSPI_LOAD_50PF  (0x03)
-#define GPIO_DSCR_DSPI_DSPI_LOAD_30PF  (0x02)
-#define GPIO_DSCR_DSPI_DSPI_LOAD_20PF  (0x01)
-#define GPIO_DSCR_DSPI_DSPI_LOAD_10PF  (0x00)
-
-/* Bit definitions and macros for DSCR_TIMER */
-#define GPIO_DSCR_TIMER_TIMER(x)       (((x)&0x03))
-#define GPIO_DSCR_TIMER_TIMER_LOAD_50PF        (0x03)
-#define GPIO_DSCR_TIMER_TIMER_LOAD_30PF        (0x02)
-#define GPIO_DSCR_TIMER_TIMER_LOAD_20PF        (0x01)
-#define GPIO_DSCR_TIMER_TIMER_LOAD_10PF        (0x00)
-
-/* Bit definitions and macros for DSCR_SSI */
-#define GPIO_DSCR_SSI_SSI(x)           (((x)&0x03))
-#define GPIO_DSCR_SSI_SSI_LOAD_50PF    (0x03)
-#define GPIO_DSCR_SSI_SSI_LOAD_30PF    (0x02)
-#define GPIO_DSCR_SSI_SSI_LOAD_20PF    (0x01)
-#define GPIO_DSCR_SSI_SSI_LOAD_10PF    (0x00)
-
-/* Bit definitions and macros for DSCR_DMA */
-#define GPIO_DSCR_DMA_DMA(x)           (((x)&0x03))
-#define GPIO_DSCR_DMA_DMA_LOAD_50PF    (0x03)
-#define GPIO_DSCR_DMA_DMA_LOAD_30PF    (0x02)
-#define GPIO_DSCR_DMA_DMA_LOAD_20PF    (0x01)
-#define GPIO_DSCR_DMA_DMA_LOAD_10PF    (0x00)
-
-/* Bit definitions and macros for DSCR_DEBUG */
-#define GPIO_DSCR_DEBUG_DEBUG(x)       (((x)&0x03))
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF        (0x03)
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF        (0x02)
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF        (0x01)
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF        (0x00)
-
-/* Bit definitions and macros for DSCR_RESET */
-#define GPIO_DSCR_RESET_RESET(x)       (((x)&0x03))
-#define GPIO_DSCR_RESET_RESET_LOAD_50PF        (0x03)
-#define GPIO_DSCR_RESET_RESET_LOAD_30PF        (0x02)
-#define GPIO_DSCR_RESET_RESET_LOAD_20PF        (0x01)
-#define GPIO_DSCR_RESET_RESET_LOAD_10PF        (0x00)
-
-/* Bit definitions and macros for DSCR_IRQ */
-#define GPIO_DSCR_IRQ_IRQ(x)           (((x)&0x03))
-#define GPIO_DSCR_IRQ_IRQ_LOAD_50PF    (0x03)
-#define GPIO_DSCR_IRQ_IRQ_LOAD_30PF    (0x02)
-#define GPIO_DSCR_IRQ_IRQ_LOAD_20PF    (0x01)
-#define GPIO_DSCR_IRQ_IRQ_LOAD_10PF    (0x00)
-
-/* Bit definitions and macros for DSCR_USB */
-#define GPIO_DSCR_USB_USB(x)           (((x)&0x03))
-#define GPIO_DSCR_USB_USB_LOAD_50PF    (0x03)
-#define GPIO_DSCR_USB_USB_LOAD_30PF    (0x02)
-#define GPIO_DSCR_USB_USB_LOAD_20PF    (0x01)
-#define GPIO_DSCR_USB_USB_LOAD_10PF    (0x00)
-
-/* Bit definitions and macros for DSCR_ATA */
-#define GPIO_DSCR_ATA_ATA(x)           (((x)&0x03))
-#define GPIO_DSCR_ATA_ATA_LOAD_50PF    (0x03)
-#define GPIO_DSCR_ATA_ATA_LOAD_30PF    (0x02)
-#define GPIO_DSCR_ATA_ATA_LOAD_20PF    (0x01)
-#define GPIO_DSCR_ATA_ATA_LOAD_10PF    (0x00)
-
-/*********************************************************************
-* SDRAM Controller (SDRAMC)
-*********************************************************************/
-
-/* Bit definitions and macros for SDMR */
-#define SDRAMC_SDMR_DDR2_AD(x)         (((x)&0x00003FFF))      /* Address for DDR2 */
-#define SDRAMC_SDMR_CMD                        (0x00010000)    /* Command */
-#define SDRAMC_SDMR_AD(x)              (((x)&0x00000FFF)<<18)  /* Address */
-#define SDRAMC_SDMR_BK(x)              (((x)&0x00000003)<<30)  /* Bank Address */
-#define SDRAMC_SDMR_BK_LMR             (0x00000000)
-#define SDRAMC_SDMR_BK_LEMR            (0x40000000)
-
-/* Bit definitions and macros for SDCR */
-#define SDRAMC_SDCR_DPD                        (0x00000001)    /* Deep Power-Down Mode */
-#define SDRAMC_SDCR_IPALL              (0x00000002)    /* Initiate Precharge All */
-#define SDRAMC_SDCR_IREF               (0x00000004)    /* Initiate Refresh */
-#define SDRAMC_SDCR_DQS_OE(x)          (((x)&0x00000003)<<10)  /* DQS Output Enable */
-#define SDRAMC_SDCR_MEM_PS             (0x00002000)    /* Data Port Size */
-#define SDRAMC_SDCR_REF_CNT(x)         (((x)&0x0000003F)<<16)  /* Periodic Refresh Counter */
-#define SDRAMC_SDCR_OE_RULE            (0x00400000)    /* Drive Rule Selection */
-#define SDRAMC_SDCR_ADDR_MUX(x)                (((x)&0x00000003)<<24)  /* Internal Address Mux Select */
-#define SDRAMC_SDCR_DDR2_MODE          (0x08000000)    /* DDR2 Mode Select */
-#define SDRAMC_SDCR_REF_EN             (0x10000000)    /* Refresh Enable */
-#define SDRAMC_SDCR_DDR_MODE           (0x20000000)    /* DDR Mode Select */
-#define SDRAMC_SDCR_CKE                        (0x40000000)    /* Clock Enable */
-#define SDRAMC_SDCR_MODE_EN            (0x80000000)    /* SDRAM Mode Register Programming Enable */
-#define SDRAMC_SDCR_DQS_OE_BOTH                (0x00000C000)
-
-/* Bit definitions and macros for SDCFG1 */
-#define SDRAMC_SDCFG1_WT_LAT(x)                (((x)&0x00000007)<<4)   /* Write Latency */
-#define SDRAMC_SDCFG1_REF2ACT(x)       (((x)&0x0000000F)<<8)   /* Refresh to active delay */
-#define SDRAMC_SDCFG1_PRE2ACT(x)       (((x)&0x00000007)<<12)  /* Precharge to active delay */
-#define SDRAMC_SDCFG1_ACT2RW(x)                (((x)&0x00000007)<<16)  /* Active to read/write delay */
-#define SDRAMC_SDCFG1_RD_LAT(x)                (((x)&0x0000000F)<<20)  /* Read CAS Latency */
-#define SDRAMC_SDCFG1_SWT2RWP(x)       (((x)&0x00000007)<<24)  /* Single write to read/write/precharge delay */
-#define SDRAMC_SDCFG1_SRD2RWP(x)       (((x)&0x0000000F)<<28)  /* Single read to read/write/precharge delay */
-
-/* Bit definitions and macros for SDCFG2 */
-#define SDRAMC_SDCFG2_BL(x)            (((x)&0x0000000F)<<16)  /* Burst Length */
-#define SDRAMC_SDCFG2_BRD2W(x)         (((x)&0x0000000F)<<20)  /* Burst read to write delay */
-#define SDRAMC_SDCFG2_BWT2RWP(x)       (((x)&0x0000000F)<<24)  /* Burst write to read/write/precharge delay */
-#define SDRAMC_SDCFG2_BRD2RP(x)                (((x)&0x0000000F)<<28)  /* Burst read to read/precharge delay */
-
-/* Bit definitions and macros for SDCS group */
-#define SDRAMC_SDCS_CSSZ(x)            (((x)&0x0000001F))      /* Chip-Select Size */
-#define SDRAMC_SDCS_CSBA(x)            (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
-#define SDRAMC_SDCS_BA(x)              ((x)&0xFFF00000)
-#define SDRAMC_SDCS_CSSZ_DISABLE       (0x00000000)
-#define SDRAMC_SDCS_CSSZ_1MBYTE                (0x00000013)
-#define SDRAMC_SDCS_CSSZ_2MBYTE                (0x00000014)
-#define SDRAMC_SDCS_CSSZ_4MBYTE                (0x00000015)
-#define SDRAMC_SDCS_CSSZ_8MBYTE                (0x00000016)
-#define SDRAMC_SDCS_CSSZ_16MBYTE       (0x00000017)
-#define SDRAMC_SDCS_CSSZ_32MBYTE       (0x00000018)
-#define SDRAMC_SDCS_CSSZ_64MBYTE       (0x00000019)
-#define SDRAMC_SDCS_CSSZ_128MBYTE      (0x0000001A)
-#define SDRAMC_SDCS_CSSZ_256MBYTE      (0x0000001B)
-#define SDRAMC_SDCS_CSSZ_512MBYTE      (0x0000001C)
-#define SDRAMC_SDCS_CSSZ_1GBYTE                (0x0000001D)
-#define SDRAMC_SDCS_CSSZ_2GBYTE                (0x0000001E)
-#define SDRAMC_SDCS_CSSZ_4GBYTE                (0x0000001F)
-
-/*********************************************************************
-* Phase Locked Loop (PLL)
-*********************************************************************/
-
-/* Bit definitions and macros for PCR */
-#define PLL_PCR_OUTDIV1(x)             (((x)&0x0000000F))      /* Output divider for CPU clock frequency */
-#define PLL_PCR_OUTDIV2(x)             (((x)&0x0000000F)<<4)   /* Output divider for internal bus clock frequency */
-#define PLL_PCR_OUTDIV3(x)             (((x)&0x0000000F)<<8)   /* Output divider for Flexbus clock frequency */
-#define PLL_PCR_OUTDIV4(x)             (((x)&0x0000000F)<<12)  /* Output divider for PCI clock frequency */
-#define PLL_PCR_OUTDIV5(x)             (((x)&0x0000000F)<<16)  /* Output divider for USB clock frequency */
-#define PLL_PCR_PFDR(x)                        (((x)&0x000000FF)<<24)  /* Feedback divider for VCO frequency */
-#define PLL_PCR_PFDR_MASK              (0x000F0000)
-#define PLL_PCR_OUTDIV5_MASK           (0x000F0000)
-#define PLL_PCR_OUTDIV4_MASK           (0x0000F000)
-#define PLL_PCR_OUTDIV3_MASK           (0x00000F00)
-#define PLL_PCR_OUTDIV2_MASK           (0x000000F0)
-#define PLL_PCR_OUTDIV1_MASK           (0x0000000F)
-
-/* Bit definitions and macros for PSR */
-#define PLL_PSR_LOCKS                  (0x00000001)    /* PLL lost lock - sticky */
-#define PLL_PSR_LOCK                   (0x00000002)    /* PLL lock status */
-#define PLL_PSR_LOLIRQ                 (0x00000004)    /* PLL loss-of-lock interrupt enable */
-#define PLL_PSR_LOLRE                  (0x00000008)    /* PLL loss-of-lock reset enable */
-
-/*********************************************************************
-* PCI
-*********************************************************************/
-
-/* Bit definitions and macros for SCR */
-#define PCI_SCR_PE                     (0x80000000)    /* Parity Error detected */
-#define PCI_SCR_SE                     (0x40000000)    /* System error signalled */
-#define PCI_SCR_MA                     (0x20000000)    /* Master aboart received */
-#define PCI_SCR_TR                     (0x10000000)    /* Target abort received */
-#define PCI_SCR_TS                     (0x08000000)    /* Target abort signalled */
-#define PCI_SCR_DT                     (0x06000000)    /* PCI_DEVSEL timing */
-#define PCI_SCR_DP                     (0x01000000)    /* Master data parity err */
-#define PCI_SCR_FC                     (0x00800000)    /* Fast back-to-back */
-#define PCI_SCR_R                      (0x00400000)    /* Reserved */
-#define PCI_SCR_66M                    (0x00200000)    /* 66Mhz */
-#define PCI_SCR_C                      (0x00100000)    /* Capabilities list */
-#define PCI_SCR_F                      (0x00000200)    /* Fast back-to-back enable */
-#define PCI_SCR_S                      (0x00000100)    /* SERR enable */
-#define PCI_SCR_ST                     (0x00000080)    /* Addr and Data stepping */
-#define PCI_SCR_PER                    (0x00000040)    /* Parity error response */
-#define PCI_SCR_V                      (0x00000020)    /* VGA palette snoop enable */
-#define PCI_SCR_MW                     (0x00000010)    /* Memory write and invalidate enable */
-#define PCI_SCR_SP                     (0x00000008)    /* Special cycle monitor or ignore */
-#define PCI_SCR_B                      (0x00000004)    /* Bus master enable */
-#define PCI_SCR_M                      (0x00000002)    /* Memory access control */
-#define PCI_SCR_IO                     (0x00000001)    /* I/O access control */
-
-#define PCI_CR1_BIST(x)                        ((x & 0xFF) << 24)      /* Built in self test */
-#define PCI_CR1_HDR(x)                 ((x & 0xFF) << 16)      /* Header type */
-#define PCI_CR1_LTMR(x)                        ((x & 0xF8) << 8)       /* Latency timer */
-#define PCI_CR1_CLS(x)                 (x & 0x0F)      /* Cache line size */
-
-#define PCI_BAR_BAR0(x)                        (x & 0xFFFC0000)
-#define PCI_BAR_BAR1(x)                        (x & 0xFFF00000)
-#define PCI_BAR_BAR2(x)                        (x & 0xFFC00000)
-#define PCI_BAR_BAR3(x)                        (x & 0xFF000000)
-#define PCI_BAR_BAR4(x)                        (x & 0xF8000000)
-#define PCI_BAR_BAR5(x)                        (x & 0xE0000000)
-#define PCI_BAR_PREF                   (0x00000004)    /* Prefetchable access */
-#define PCI_BAR_RANGE                  (0x00000002)    /* Fixed to 00 */
-#define PCI_BAR_IO_M                   (0x00000001)    /* IO / memory space */
-
-#define PCI_CR2_MAXLAT(x)              ((x & 0xFF) << 24)      /* Maximum latency */
-#define PCI_CR2_MINGNT(x)              ((x & 0xFF) << 16)      /* Minimum grant */
-#define PCI_CR2_INTPIN(x)              ((x & 0xFF) << 8)       /* Interrupt Pin */
-#define PCI_CR2_INTLIN(x)              (x & 0xFF)      /* Interrupt Line */
-
-#define PCI_GSCR_DRD                   (0x80000000)    /* Delayed read discarded */
-#define PCI_GSCR_PE                    (0x20000000)    /* PCI_PERR detected */
-#define PCI_GSCR_SE                    (0x10000000)    /* SERR detected */
-#define PCI_GSCR_ER                    (0x08000000)    /* Error response detected */
-#define PCI_GSCR_DRDE                  (0x00008000)    /* Delayed read discarded enable */
-#define PCI_GSCR_PEE                   (0x00002000)    /* PERR detected interrupt enable */
-#define PCI_GSCR_SEE                   (0x00001000)    /* SERR detected interrupt enable */
-#define PCI_GSCR_PR                    (0x00000001)    /* PCI reset */
-
-#define PCI_TCR1_LD                    (0x01000000)    /* Latency rule disable */
-#define PCI_TCR1_PID                   (0x00020000)    /* Prefetch invalidate and disable */
-#define PCI_TCR1_P                     (0x00010000)    /* Prefetch reads */
-#define PCI_TCR1_WCD                   (0x00000100)    /* Write combine disable */
-
-#define PCI_TCR2_B5E                   (0x00002000)    /*  */
-#define PCI_TCR2_B4E                   (0x00001000)    /*  */
-#define PCI_TCR2_B3E                   (0x00000800)    /*  */
-#define PCI_TCR2_B2E                   (0x00000400)    /*  */
-#define PCI_TCR2_B1E                   (0x00000200)    /*  */
-#define PCI_TCR2_B0E                   (0x00000100)    /*  */
-#define PCI_TCR2_CR                    (0x00000001)    /*  */
-
-#define PCI_TBATR_BAT(x)               ((x & 0xFFF) << 20)
-#define PCI_TBATR_EN                   (0x00000001)    /* Enable */
-
-#define PCI_IWCR_W0C_IO                        (0x08000000)    /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W0C_PRC_RDMUL         (0x04000000)    /* PCI Memory Read multiple */
-#define PCI_IWCR_W0C_PRC_RDLN          (0x02000000)    /* PCI Memory Read line */
-#define PCI_IWCR_W0C_PRC_RD            (0x00000000)    /* PCI Memory Read */
-#define PCI_IWCR_W0C_EN                        (0x01000000)    /* Enable - Register initialize */
-#define PCI_IWCR_W1C_IO                        (0x00080000)    /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W1C_PRC_RDMUL         (0x00040000)    /* PCI Memory Read multiple */
-#define PCI_IWCR_W1C_PRC_RDLN          (0x00020000)    /* PCI Memory Read line */
-#define PCI_IWCR_W1C_PRC_RD            (0x00000000)    /* PCI Memory Read */
-#define PCI_IWCR_W1C_EN                        (0x00010000)    /* Enable - Register initialize */
-#define PCI_IWCR_W2C_IO                        (0x00000800)    /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W2C_PRC_RDMUL         (0x00000400)    /* PCI Memory Read multiple */
-#define PCI_IWCR_W2C_PRC_RDLN          (0x00000200)    /* PCI Memory Read line */
-#define PCI_IWCR_W2C_PRC_RD            (0x00000000)    /* PCI Memory Read */
-#define PCI_IWCR_W2C_EN                        (0x00000100)    /* Enable - Register initialize */
-
-#define PCI_ICR_REE                    (0x04000000)    /* Retry error enable */
-#define PCI_ICR_IAE                    (0x02000000)    /* Initiator abort enable */
-#define PCI_ICR_TAE                    (0x01000000)    /* Target abort enable */
-#define PCI_ICR_MAXRETRY(x)            ((x) & 0x000000FF)
-
-/********************************************************************/
-
-#endif                         /* __MCF5445X__ */
diff --git a/board/freescale/m54451evb/Kconfig b/board/freescale/m54451evb/Kconfig
deleted file mode 100644 (file)
index f460e51..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M54451EVB
-
-config SYS_CPU
-       default "mcf5445x"
-
-config SYS_BOARD
-       default "m54451evb"
-
-config SYS_VENDOR
-       default "freescale"
-
-config SYS_CONFIG_NAME
-       default "M54451EVB"
-
-endif
diff --git a/board/freescale/m54451evb/MAINTAINERS b/board/freescale/m54451evb/MAINTAINERS
deleted file mode 100644 (file)
index 52a2681..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-M54451EVB BOARD
-#M:    -
-S:     Maintained
-F:     board/freescale/m54451evb/
-F:     include/configs/M54451EVB.h
-F:     configs/M54451EVB_defconfig
-F:     configs/M54451EVB_stmicro_defconfig
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
deleted file mode 100644 (file)
index 8c2c6a9..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y  = m54451evb.o
-extra-y        += sbf_dram_init.o
diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c
deleted file mode 100644 (file)
index a4ddc69..0000000
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <spi.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-       /*
-        * need to to:
-        * Check serial flash size. if 2mb evb, else 8mb demo
-        */
-       puts("Board: ");
-       puts("Freescale M54451 EVB\n");
-       return 0;
-};
-
-int dram_init(void)
-{
-       u32 dramsize;
-#ifdef CONFIG_CF_SBF
-       /*
-        * Serial Boot: The dram is already initialized in start.S
-        * only require to return DRAM size
-        */
-       dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-#else
-       sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
-       gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
-       u32 i;
-
-       dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-
-       if ((in_be32(&sdram->sdcfg1) == CONFIG_SYS_SDRAM_CFG1) &&
-           (in_be32(&sdram->sdcfg2) == CONFIG_SYS_SDRAM_CFG2))
-               return dramsize;
-
-       for (i = 0x13; i < 0x20; i++) {
-               if (dramsize == (1 << i))
-                       break;
-       }
-       i--;
-
-       out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
-
-       out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
-
-       out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
-       out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
-
-       udelay(200);
-
-       /* Issue PALL */
-       out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-       __asm__("nop");
-
-       /* Perform two refresh cycles */
-       out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-       __asm__("nop");
-       out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-       __asm__("nop");
-
-       /* Issue LEMR */
-       out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
-       __asm__("nop");
-       out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
-       __asm__("nop");
-
-       out_be32(&sdram->sdcr,
-               (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000);
-
-       udelay(100);
-#endif
-       gd->ram_size = dramsize;
-
-       return 0;
-};
-
-int testdram(void)
-{
-       /* TODO: XXX XXX XXX */
-       printf("DRAM test not implemented!\n");
-
-       return (0);
-}
diff --git a/board/freescale/m54451evb/sbf_dram_init.S b/board/freescale/m54451evb/sbf_dram_init.S
deleted file mode 100644 (file)
index ee08cd1..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board-specific sbf ddr/sdram init.
- *
- * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
- */
-
- #include <config.h>
-
-.global sbf_dram_init
-.text
-
-sbf_dram_init:
-       /* Dram Initialization a1, a2, and d0 */
-       /* mscr sdram */
-       move.l  #0xFC0A4074, %a1
-       move.b  #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
-       nop
-
-       /* SDRAM Chip 0 and 1 */
-       move.l  #0xFC0B8110, %a1
-       move.l  #0xFC0B8114, %a2
-
-       /* calculate the size */
-       move.l  #0x13, %d1
-       move.l  #(CONFIG_SYS_SDRAM_SIZE), %d2
-#ifdef CONFIG_SYS_SDRAM_BASE1
-       lsr.l   #1, %d2
-#endif
-
-dramsz_loop:
-       lsr.l   #1, %d2
-       add.l   #1, %d1
-       cmp.l   #1, %d2
-       bne     dramsz_loop
-#ifdef CONFIG_SYS_NAND_BOOT
-       beq     asm_nand_chk_status
-#endif
-       /* SDRAM Chip 0 and 1 */
-       move.l  #(CONFIG_SYS_SDRAM_BASE), (%a1)
-       or.l    %d1, (%a1)
-#ifdef CONFIG_SYS_SDRAM_BASE1
-       move.l  #(CONFIG_SYS_SDRAM_BASE1), (%a2)
-       or.l    %d1, (%a2)
-#endif
-       nop
-
-       /* dram cfg1 and cfg2 */
-       move.l  #0xFC0B8008, %a1
-       move.l  #(CONFIG_SYS_SDRAM_CFG1), (%a1)
-       nop
-       move.l  #0xFC0B800C, %a2
-       move.l  #(CONFIG_SYS_SDRAM_CFG2), (%a2)
-       nop
-
-       move.l  #0xFC0B8000, %a1        /* Mode */
-       move.l  #0xFC0B8004, %a2        /* Ctrl */
-
-       /* Issue PALL */
-       move.l  #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-       nop
-
-       move.l  #1000, %d1
-       bsr     asm_delay
-
-       /* Issue PALL */
-       move.l  #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-       nop
-
-       /* Perform two refresh cycles */
-       move.l  #(CONFIG_SYS_SDRAM_CTRL + 4), %d0
-       nop
-       move.l  %d0, (%a2)
-       move.l  %d0, (%a2)
-       nop
-
-       /* Issue LEMR */
-       move.l  #(CONFIG_SYS_SDRAM_MODE), (%a1)
-       nop
-       move.l  #(CONFIG_SYS_SDRAM_EMOD), (%a1)
-
-       move.l  #500, %d1
-       bsr     asm_delay
-
-       move.l  #(CONFIG_SYS_SDRAM_CTRL), %d1
-       and.l   #0x7FFFFFFF, %d1
-
-       or.l    #0x10000C00, %d1
-
-       move.l  %d1, (%a2)
-       nop
-
-       move.l  #2000, %d1
-       bsr     asm_delay
-
-       rts
diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig
deleted file mode 100644 (file)
index a3583e5..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54451EVB"
-CONFIG_TARGET_M54451EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig
deleted file mode 100644 (file)
index 5f5e6a5..0000000
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x20000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54451EVB_stmicro"
-CONFIG_TARGET_M54451EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=1
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
index 43bb761..cef9eec 100644 (file)
@@ -105,17 +105,11 @@ static void set_fec_duplex_speed(volatile fec_t *fecp, int dup_spd)
        }
 
        if ((dup_spd & 0xFFFF) == _100BASET) {
-#ifdef CONFIG_MCF5445x
-               fecp->rcr &= ~0x200;    /* disabled 10T base */
-#endif
 #ifdef MII_DEBUG
                printf("100Mbps\n");
 #endif
                bd->bi_ethspeed = 100;
        } else {
-#ifdef CONFIG_MCF5445x
-               fecp->rcr |= 0x200;     /* enabled 10T base */
-#endif
 #ifdef MII_DEBUG
                printf("10Mbps\n");
 #endif
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
deleted file mode 100644 (file)
index f5bafb7..0000000
+++ /dev/null
@@ -1,242 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF54451 EVB board.
- *
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M54451EVB_H
-#define _M54451EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_M54451EVB       /* M54451EVB board */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT           (0)
-
-#define LDS_BOARD_TEXT                  board/freescale/m54451evb/sbf_dram_init.o (.text*)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP       /* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Network configuration */
-#ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
-#      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#      define CONFIG_ETHPRIME          "FEC0"
-#      define CONFIG_IPADDR            192.162.1.2
-#      define CONFIG_NETMASK           255.255.255.0
-#      define CONFIG_SERVERIP          192.162.1.1
-#      define CONFIG_GATEWAYIP         192.162.1.1
-
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#      ifndef CONFIG_SYS_DISCOVER_PHY
-#              define FECDUPLEX        FULL
-#              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
-#      endif                   /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#define CONFIG_HOSTNAME                "M54451EVB"
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define        CONFIG_SYS_LOAD_ADDR2           0x40010007
-#define CONFIG_EXTRA_ENV_SETTINGS              \
-       "netdev=eth0\0"                         \
-       "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
-       "loadaddr=0x40010000\0"                 \
-       "sbfhdr=sbfhdr.bin\0"                   \
-       "uboot=u-boot.bin\0"                    \
-       "load=tftp ${loadaddr} ${sbfhdr};"      \
-       "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
-       "upd=run load; run prog\0"              \
-       "prog=sf probe 0:1 1000000 3;"          \
-       "sf erase 0 30000;"                     \
-       "sf write ${loadaddr} 0 30000;"         \
-       "save\0"                                \
-       ""
-#else
-#define CONFIG_SYS_UBOOT_END   0x3FFFF
-#define CONFIG_EXTRA_ENV_SETTINGS              \
-       "netdev=eth0\0"                         \
-       "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
-       "loadaddr=40010000\0"                   \
-       "u-boot=u-boot.bin\0"                   \
-       "load=tftp ${loadaddr) ${u-boot}\0"     \
-       "upd=run load; run prog\0"              \
-       "prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END)    \
-       "; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;"       \
-       "cp.b ${loadaddr} 0 ${filesize};"       \
-       "save\0"                                \
-       ""
-#endif
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR      (32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x58000
-#define CONFIG_SYS_IMMR                        CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SERIAL_FLASH
-#define CONFIG_SYS_SBFHDR_SIZE         0x7
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_PRAM                    2048    /* 2048 KB */
-
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR                        0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR       0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE       0x8000  /* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL       0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE          0x40000000
-#define CONFIG_SYS_SDRAM_SIZE          128     /* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1          0x33633F30
-#define CONFIG_SYS_SDRAM_CFG2          0x57670000
-#define CONFIG_SYS_SDRAM_CTRL          0xE20D2C00
-#define CONFIG_SYS_SDRAM_EMOD          0x80810000
-#define CONFIG_SYS_SDRAM_MODE          0x008D0000
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH  0x44
-
-#ifdef CONFIG_CF_SBF
-#      define CONFIG_SERIAL_BOOT
-#      define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#      define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
-#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
-
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN          (256 << 10)
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ           (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/* Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_CS0_BASE
-
-#ifdef CONFIG_SYS_FLASH_CFI
-
-#      define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
-#      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
-#      define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
-#      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
-#      define CONFIG_SYS_FLASH_CHECKSUM
-#      define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE }
-
-#endif
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#      define CONFIG_JFFS2_DEV         "nor0"
-#      define CONFIG_JFFS2_PART_SIZE   0x01000000
-#      define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
-#endif
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE              16
-
-#define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV          (CF_CACR_BCINVA + CF_CACR_ICINVA)
-#define CONFIG_SYS_DCACHE_INV          (CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2          (CONFIG_SYS_SDRAM_BASE | \
-                                        CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-                                        CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR         (CF_CACR_BEC | CF_CACR_IEC | \
-                                        CF_CACR_ICINVA | CF_CACR_EUSP)
-#define CONFIG_SYS_CACHE_DCACR         ((CONFIG_SYS_CACHE_ICACR | \
-                                        CF_CACR_DEC | CF_CACR_DDCM_P | \
-                                        CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash 16MB
- * CS1 - Available
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-
- /* Flash */
-#define CONFIG_SYS_CS0_BASE            0x00000000
-#define CONFIG_SYS_CS0_MASK            0x00FF0001
-#define CONFIG_SYS_CS0_CTRL            0x00004D80
-
-#define CONFIG_SYS_SPANSION_BASE       CONFIG_SYS_CS0_BASE
-
-#endif                         /* _M54451EVB_H */