Rob Clark [Fri, 28 Feb 2014 14:25:10 +0000 (09:25 -0500)]
freedreno: fix null ptr in error path
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Fri, 28 Feb 2014 14:24:39 +0000 (09:24 -0500)]
freedreno: simplify device creation
Signed-off-by: Rob Clark <robclark@freedesktop.org>
François Tigeot [Mon, 17 Feb 2014 09:07:54 +0000 (10:07 +0100)]
Enable libkms by default on DragonFly
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Rob Clark [Wed, 19 Feb 2014 16:01:23 +0000 (11:01 -0500)]
freedreno: some msm-ring reset/flush fixes
Need to update timestamp on all ring's associated with a submit (ie.
both the binning pass and main ring). Also, make sure nr_reloc's
in particular gets cleared if the rb is reset.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Fri, 31 Jan 2014 16:58:30 +0000 (11:58 -0500)]
freedreno: fix license
The userspace headers were intended to be BSD license.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Robert Millan [Thu, 23 Jan 2014 14:46:05 +0000 (14:46 +0000)]
drm: Implement drmCheckModesettingSupported() for FreeBSD
Add the missing implementation of drmCheckModesettingSupported()
to detect KMS support on FreeBSD (and GNU/kFreeBSD).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72847
Signed-off-by: Konstantin Belousov <kib@freebsd.org>
Signed-off-by: Robert Millan <rmh@freebsd.org>
Lucas Stach [Fri, 17 Jan 2014 11:19:17 +0000 (12:19 +0100)]
modeprint: pretty print connector names
Use same names as the kernel, makes it easier to identify
connectors in the common case.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Kenneth Graunke [Mon, 13 Jan 2014 23:47:15 +0000 (15:47 -0800)]
Bump the version to 2.4.52
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Mon, 13 Jan 2014 22:14:36 +0000 (14:14 -0800)]
intel: Create a new drm_intel_bo offset64 field.
The existing 'offset' field is unfortunately typed as 'unsigned long',
which is unfortunately only 4 bytes with a 32-bit userspace.
Traditionally, the hardware has only supported 32-bit virtual addresses,
so even though the kernel uses a __u64, the value would always fit.
However, Broadwell supports 48-bit addressing. So with a 64-bit kernel,
the card virtual address may be too large to fit in the 'offset' field.
Ideally, we would change the type of 'offset' to be a uint64_t---but
this would break the libdrm ABI. Instead, we create a new 'offset64'
field to hold the full 64-bit value from the kernel, and store the
32-bit truncation in the existing 'offset' field, for compatibility.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Eric Anholt [Wed, 15 Jan 2014 08:38:39 +0000 (00:38 -0800)]
intel: Track whether a buffer is idle to avoid trips to the kernel.
I've seen a number of apps spending unreasonable amounts of time in
drm_intel_bo_busy during the buffer mapping process.
We can't track idleness in general, in the case of buffers shared
across processes. But this should significantly reduce our overhead
for checking for busy on things like VBOs.
Improves (unoptimized) glamor x11perf -f8text by 0.243334% +/-
0.161498% (n=1549), which has formerly been spending about .5% of its
time hitting the kernel for drm_intel_gem_bo_busy().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Anholt [Sun, 29 Dec 2013 06:06:51 +0000 (22:06 -0800)]
drm: Initialize or valgrind-clear modesetting ioctl arguments.
Fixes valgrind complaints in the modesetting driver. I tried to
follow each ioctl's pattern for whether it was initializing just the
in values, or both in and out values.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Keith Packard [Sun, 12 Jan 2014 18:32:57 +0000 (10:32 -0800)]
Mark debug_print with __attribute__ ((format(__printf__, 1, 0)))
the drmServerInfo member, debug_print, takes a printf format string
and varargs list. Tell the compiler about it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Rob Clark [Sun, 12 Jan 2014 13:27:36 +0000 (08:27 -0500)]
freedreno: add fd_device_new_dup()
There seem to be some cases (I've noticed this switching resolution in
some games, for example) where the fd can get closed() before the device
and all it's bo's are destroyed. Which, if the drm device is opened
again and bo's are allocated with the same handles, results that when
the first pipe_screen/pipe_context is destroyed causes the first dev to
close handles for bo's allocated by the second device.
The easy solution to that is to add a mode where the fd_device creates
it's own private fd (a dup()).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Vincent ABRIOU [Fri, 10 Jan 2014 10:02:33 +0000 (11:02 +0100)]
modetest: add the possibility to select the refresh frequency for a mode
When mode is selected we only give the name of the mode as parameter.
But sometime, two different modes have the same name but not
the same vrefresh frequency.
This patch give the possibility to select a mode by its name
and optionally by its refresh frequency.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Hyungwon Hwang [Fri, 10 Jan 2014 07:44:30 +0000 (16:44 +0900)]
tests/kmstest: support exynos
In this patch, to support exynos for KMS, Exynos KMS driver is newly added.
Also, Exynos is added to the list of kmstest supported modules.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Ben Widawsky [Thu, 2 Jan 2014 19:36:59 +0000 (11:36 -0800)]
intel: Merge latest i915_drm.h
This was not done as a straight copy because reset_stats IOCTL landed in
libdrm before upstream kernel.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Fri, 27 Dec 2013 00:37:00 +0000 (16:37 -0800)]
intel: Handle malloc fails in context create
The previous code would just use the potentially unallocated variable,
which is probably okay most of the time, but not very nice to the user
of the library.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Fri, 27 Dec 2013 00:30:09 +0000 (16:30 -0800)]
intel: squash unused variable 'bo_gem'
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Rob Clark [Wed, 8 Jan 2014 20:36:29 +0000 (15:36 -0500)]
Bump the version to 2.4.51
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Sat, 21 Dec 2013 17:11:40 +0000 (12:11 -0500)]
freedreno: allow IB to different ringbuffer
Allow IB to different ringbuffer in addition to just different part of
same ringbuffer. In particular, we need to add bo's to the parent (ie.
one passed to flush) bo table, since the bo table applies to all the
cmd buffers in submit ioctl.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Sun, 5 Jan 2014 17:19:12 +0000 (12:19 -0500)]
freedreno/kgsl: fix crash introduced w/ bo-cache
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Alex Deucher [Tue, 24 Dec 2013 20:19:34 +0000 (15:19 -0500)]
radeon: fix sumo2 pci id
0x9649 is sumo2, not sumo.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 10 Dec 2013 17:38:26 +0000 (12:38 -0500)]
radeon: avoid possible divide by 0 in surface manager
Some users report hitting a divide by 0 with the tile split in
certain apps. Tile_split shouldn't ever be 0 unless the surface
structure was not properly initialized. I think there may be some
cases where mesa uses an improperly initialized surface struct,
but I haven't had time to track it down.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72425
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Rob Clark [Fri, 13 Dec 2013 17:48:30 +0000 (12:48 -0500)]
freedreno: add bo cache
Workloads which create many transient buffers cause significant CPU
overhead in buffer allocation, zeroing, cache maint, and mmap setup.
By caching and re-using existing buffers, the CPU overhead drops
significantly. See:
http://bloggingthemonkey.blogspot.com/2013/09/freedreno-update-moar-fps.html
A simple time based policy is used for purging the cache. Once the
kernel supports it, we could use madvise style API to handle memory
pressure scenarios a bit better.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Damien Lespiau [Fri, 13 Dec 2013 12:03:10 +0000 (12:03 +0000)]
intel/test_decode: Allow gen8 to be infered from the batch filenames
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 13 Dec 2013 17:15:14 +0000 (17:15 +0000)]
gitignore: Ignore various generated files
- *.log/*.trs are generated by make check
- TAGS are generated by make tags
- build-aux, config.h.in~ by autoconf
- *.sw? are temporary files create by vim
- name_from_fd wasn't ignored yet for some reason
v2: Ignore *~ as well (Daniel Vetter)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Marek Olšák [Tue, 3 Dec 2013 18:50:22 +0000 (19:50 +0100)]
Bump the version to 2.4.50
Keith Packard [Fri, 22 Nov 2013 13:31:01 +0000 (05:31 -0800)]
intel: Track known prime buffers for re-use
If the application sends us a file descriptor pointing at a prime
buffer that we've already got, we have to re-use the same bo_gem
structure or chaos will result.
Track the set of all known prime objects and look to see if the kernel
has returned one of those for a new file descriptor.
Also checks for prime buffers in the flink case.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Dänzer [Tue, 26 Nov 2013 09:16:03 +0000 (18:16 +0900)]
radeon: Update unaligned offset for 2D->1D tiling transition on SI
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71983
Tested-by: Arek Ruśniak <arek.rusi@gmail.com>
Marek Olšák [Sat, 23 Nov 2013 00:27:57 +0000 (01:27 +0100)]
Bump the version for release
Marek Olšák [Fri, 22 Nov 2013 23:34:45 +0000 (00:34 +0100)]
radeon: handle P16 pipe configs for Hawaii
Michel Dänzer [Mon, 18 Nov 2013 10:40:08 +0000 (11:40 +0100)]
radeon: don't overallocate stencil by 4 on SI and CIK
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Marek Olšák [Fri, 22 Nov 2013 22:31:13 +0000 (23:31 +0100)]
radeon: implement 2D tiling for CIK
Bug fixes and simplification by Marek.
We have to use the tile index of 0 for non-MSAA depth-stencil after all.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Thu, 14 Nov 2013 15:40:30 +0000 (16:40 +0100)]
radeon: fix mipmap level 0 and 1 alignment for SI and CIK
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Ian Romanick [Wed, 20 Nov 2013 16:32:14 +0000 (08:32 -0800)]
intel: Use memset instead of VG_CLEAR
The ioctl expects that certain fields will be zeroed, so we should allow
the helper function to actually work in non-Valgrind builds.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas Hellstrom [Tue, 19 Nov 2013 06:50:11 +0000 (07:50 +0100)]
libdrm/mode: Update the encoder and connector defines
Update the defines to match the kernel drm_mode.h
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Ian Romanick [Sat, 16 Nov 2013 02:01:08 +0000 (18:01 -0800)]
libdrm: bump to 2.4.48
Ian Romanick [Fri, 15 Nov 2013 18:24:43 +0000 (10:24 -0800)]
intel: Add support for GPU reset status query ioctl
I would have just used the drmIoctl interface directly in Mesa, but the
ioctl needs some data from the drm_intel_context that is not exposed
outside libdrm.
This ioctl is in the drm-intel-next tree as b635991.
v2: Update based on Mika's kernel work.
v3: Fix compile failures from last-minute typos. Sigh.
v4: Import the actual changes from the kernel i915_drm.h. Only comments
on some fields of drm_i915_reset_stats differed. There are still some
deltas between the kernel i915_drm.h and the one in libdrm, but those
can be resolved in other patches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v3]
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Deucher [Tue, 24 Sep 2013 15:30:19 +0000 (11:30 -0400)]
radeon: add hawaii pci ids
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 24 Sep 2013 15:27:11 +0000 (11:27 -0400)]
radeon: add hawaii chip family
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 8 Nov 2013 06:40:18 +0000 (16:40 +1000)]
Revert "intel: Add support for GPU reset status query ioctl"
This reverts commit
6335e1d28c422050024bcf4100c4fb3a5bac2afb.
No taxation without representation, in other words no userspace without kernel
stuff being in a stable location, either drm-next but I'll accept drm-intel-next
for intel specific stuff.
Ian Romanick [Mon, 10 Sep 2012 11:15:02 +0000 (14:15 +0300)]
intel: Add support for GPU reset status query ioctl
I would have just used the drmIoctl interface directly in Mesa, but the
ioctl needs some data from the drm_intel_context that is not exposed
outside libdrm.
v2: Update based on Mika's kernel work.
v3: Fix compile failures from last-minute typos. Sigh.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 15 Feb 2013 16:44:05 +0000 (16:44 +0000)]
intel/bdw: Update MI_BATCH_BUFFER_START for aub dumps
The command now takes a 48bits address and is thus 1 dword longer.
v2 (Ben): commit message: s/byte/dword (Eric)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Kenneth Graunke [Fri, 15 Feb 2013 17:29:46 +0000 (09:29 -0800)]
intel/bdw/aub: Update AUB trace block writes for 48-bit addressing.
Since our aub file dumping's GTT handling is totally fake, we always put
everything in the low 4GB anyway and shouldn't ever need to set
AddressHigh to anything other than 0.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
[ben: slight commit message change]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Damien Lespiau [Wed, 13 Feb 2013 16:09:34 +0000 (16:09 +0000)]
intel/bdw: Add gen8 to the decode init
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 13 Feb 2013 16:09:33 +0000 (16:09 +0000)]
intel/bdw: Handle gen8 bufmgr_init
[bwidawsk: Added Damien's SOB]
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Tue, 4 Dec 2012 21:56:14 +0000 (13:56 -0800)]
intel/bdw: Add broadwell chipset IDs
v2: Rename s/<SECRET>/IRIS/
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Maarten Lankhorst [Thu, 7 Nov 2013 12:30:19 +0000 (13:30 +0100)]
nouveau: prevent undefined behavior in nouveau_pushbuf_reloc with gcc-4.8
Reported-by: ronald645@gmail.com
Bisected-by (gcc): Andreas Radke <a.radke@arcor.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71116
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Keith Packard [Sun, 21 Jul 2013 21:24:35 +0000 (14:24 -0700)]
Add DRM_MODE_PAGE_FLIP_ASYNC define
This exposes the kernel API for performing asynchronous flips
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Wed, 30 Oct 2013 03:41:16 +0000 (20:41 -0700)]
intel: Add MI_LOAD_REGISTER_MEM to intel_decode.c.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Kenneth Graunke [Wed, 30 Oct 2013 02:30:45 +0000 (19:30 -0700)]
intel: Add the Gen6+ version of MI_REPORT_PERF_COUNT to intel_decode.c.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Ben Widawsky [Fri, 11 Oct 2013 16:47:45 +0000 (09:47 -0700)]
libdrm: bump to 2.4.47
Kristian Høgsberg [Thu, 10 Oct 2013 21:40:58 +0000 (14:40 -0700)]
intel: Set bo size from lseek if kernel supports it
The various create and open functions set the buffer size, but
drm_intel_bo_gem_create_from_prime() is an exception. In the 3.12 kernel
we can now use lseek on the prime fd to determine the size of the bo.
Use that and override the userprovided size. If the kernel doesn't
support this, we get an error and fall back to the user provided size.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Damien Lespiau [Tue, 3 Sep 2013 14:34:41 +0000 (15:34 +0100)]
drm: Introduce a drmSetClientCap() wrapper
That wraps around the new DRM_SET_CLIENT_CAP ioctl.
v2: SET_CAP -> SET_CLIENT_CAP renaming
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Tue, 3 Sep 2013 14:31:49 +0000 (15:31 +0100)]
drm: Sync the DRM_SET_CLIENT_CAP ioctl definition
v2: SET_CAP -> SET_CLIENT_CAP renaming
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 23 Aug 2013 14:57:40 +0000 (15:57 +0100)]
drm: Synchronize the stereo 3D mode flags from the kernel headers
v2: stereo layouts are now an enum (Daniel Vetter)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Marek Olšák [Thu, 19 Sep 2013 12:19:02 +0000 (14:19 +0200)]
radeon: fix pitch alignment for non-power-of-two mipmaps on SI
This fixes VM protection faults.
I have a new piglit test which can iterate over all possible widths, heights,
and depths (including NPOT) and tests mipmapping with various texture targets.
After this is committed, I'll make a new release of libdrm and bump
the libdrm version requirement in Mesa.
Emil Velikov [Thu, 19 Sep 2013 16:21:01 +0000 (17:21 +0100)]
configure: add AC_LANG_SOURCE call within AC_COMPILE_IFELSE
Documentation states that AC_*_IFELSE has to use AC_LANG_SOURCE or
friends in order to generate the source code to compile.
AC_LINK_IFELSE already handles this, thus convert AC_COMPILE_IFELSE
to silence the final autoconf warnings.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Daniel Kurtz [Mon, 26 Aug 2013 15:39:16 +0000 (23:39 +0800)]
libdrm: Make some drm headers compatible with gcc -std=c89 -pedantic
The following minor changes were needed to these headers:
* Convert // comments to /* */
* No , after final member of enum
With these changes, these header files can be included by a program that
is built with gcc options:
-std=c89 -Werror -pedantic
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Michel Dänzer [Wed, 18 Sep 2013 13:43:05 +0000 (15:43 +0200)]
radeon: Fix tiling mode index for 1D tiled depth/stencil surfaces on CIK
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Rob Clark [Wed, 11 Sep 2013 19:55:35 +0000 (15:55 -0400)]
freedreno: add missing NOSYNC flag
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Ilia Mirkin [Sun, 8 Sep 2013 01:36:02 +0000 (21:36 -0400)]
modetest: allow setting a scaling factor when showing plane
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Ilia Mirkin [Sun, 8 Sep 2013 01:36:01 +0000 (21:36 -0400)]
modetest: add a -D option to specify a device to be used
This is helpful for differentiating between multiple devices that use
the same module.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Alex Deucher [Fri, 6 Sep 2013 19:58:56 +0000 (15:58 -0400)]
radeon: pad CS to 8 DW
Aligns the IB to 8 DWs. The aligns the IB to the
CP fetch size. r6xx also require at least 4 DW
alignment to avoid a hw bug.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 24 Jan 2013 23:12:21 +0000 (18:12 -0500)]
radeon: add berlin pci ids
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emil Velikov [Thu, 29 Aug 2013 20:31:54 +0000 (21:31 +0100)]
intel: Update package name and description in libdrm_intel.pc
Currently the package name and description duplicate that of the
core libdrm. Update those to reflect reality.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Emil Velikov [Thu, 29 Aug 2013 20:31:53 +0000 (21:31 +0100)]
freedreno: set automake options to include subdir-objects
Handles automake complains about lack of forward-compatibility, due to the
source files in the kgsl and msm backends/folders.
Cc: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 29 Aug 2013 20:31:52 +0000 (21:31 +0100)]
freedreno: use local drm.h over the system one
Otherwise build will fail, as drm/drm.h is not available.
Cc: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 29 Aug 2013 20:31:51 +0000 (21:31 +0100)]
tests/modetest: silence compiler warning about uninitialised variables
The compiler is unaware of that we have at least one crts/connector/plane
thus it complains that some of our variables will be used uninitialised.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Emil Velikov [Thu, 29 Aug 2013 20:31:50 +0000 (21:31 +0100)]
tests/*version: add missing string.h header
Prodives memset() and strlen(), used in tests/setversion
tests/getversion respectively.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 30 Aug 2013 15:15:30 +0000 (11:15 -0400)]
tests: add msm
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Sun, 21 Jul 2013 00:35:31 +0000 (20:35 -0400)]
freedreno: add support for msm drm
This adds support for the "msm" backend, using the upstream msm drm/kms
driver.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Wed, 10 Jul 2013 19:20:04 +0000 (15:20 -0400)]
freedreno: support either kgsl or msm
Split out common code and backend. Current backend is for 'kgsl'
android driver, but a new backend will provide support for the
upstream msm drm/kms driver.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Laurent Pinchart [Fri, 14 Jun 2013 20:57:49 +0000 (22:57 +0200)]
modetest: Allocate NV buffers large enough for the two planes
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to
make room for the chroma plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Fri, 14 Jun 2013 20:57:30 +0000 (22:57 +0200)]
modetest: Fix line stride in SMPTE YUV packet pattern generator
The line stride passed to the function is expressed in bytes, there's no
need to multiply it by 2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Tue, 19 Mar 2013 14:36:09 +0000 (15:36 +0100)]
modetest: Try all possible encoders for a connector
When building the pipeline, instead of using only the encoders attached
to a connector, take all possible encoders into account to locate a
CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Tue, 19 Mar 2013 12:48:36 +0000 (13:48 +0100)]
modetest: Support pipes with multiple connectors
The -s argument can now take a list of connectors. Configure all of them
in cloned mode using a single CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Tue, 19 Mar 2013 12:47:39 +0000 (13:47 +0100)]
modetest: Rename struct connector_arg to struct pipe_arg
This prepares the code for handling multiple connectors in a single
pipeline in a cloned configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Split mode setting and plane setup
There's not reason to require setting a mode to test planes. Split the
two operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Give the CRTC ID to the -P option
Planes are associated with CRTCs, not connectors. Don't try to be too
clever, use the CRTC ID in the -P option. This prepares for splitting
CRTC and planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Store the mode in the crtc structure
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Store the crtc in the connector_arg structure
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Remove the struct connector_arg encoder field
The field is no needed, make it a local variable where used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Compute CRTC pipe number as needed
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Create a device structure
Instead of passing the device fd and resources as global variables group
them in a device structure and pass it explictly to all functions that
need it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Remove the -m argument
The argument isn't used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Print the plane ID when setting up a plane
As modetest automatically selects an unused plan, providing the plane ID
allows modifying plane properties for the selected planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Allow specifying plane position
Extend the -P option to allow specifying the plane x and y offsets. The
position is optional, if not specified the plane will be positioned at
the center of the screen as before.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:35:13 +0000 (05:35 +0100)]
modetest: Add a command line parameter to set properties
The -w parameter can be used to set a property value from the command
line, using the target object ID and the property name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Fri, 1 Mar 2013 01:28:42 +0000 (02:28 +0100)]
modetest: Don't limit mode set and planes to two instances
Configuring mode on more than two connectors or two planes is perfectly
valid. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 05:39:36 +0000 (06:39 +0100)]
modetest: Retrieve all resources in one go
Instead of retrieving resources as they are needed, retrieve them all
(except property blobs) in one go at startup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Wed, 27 Feb 2013 04:19:44 +0000 (05:19 +0100)]
modetest: Add a command line parameter to drop master after mode set
If the -d parameter is specified, modetest will drop master permissions
after setting the mode.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Fri, 8 Feb 2013 12:42:45 +0000 (13:42 +0100)]
modetest: Add a command line parameter to select the driver
If the -M parameter is specified, modetest will use the requested device
name instead of trying its builtin list of device names.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Laurent Pinchart [Fri, 8 Feb 2013 10:12:03 +0000 (11:12 +0100)]
modetest: Sort command line arguments
The current mostly random sort order hinders code readability. Sort the
options alphabetically in the code, and by group in the help message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Laurent Pinchart [Fri, 8 Feb 2013 10:08:38 +0000 (11:08 +0100)]
modetest: Remove extern declarations of opt(arg|ind|err|opt)
Those variables are declared in unistd.h, there's no need to redeclare
them here.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Laurent Pinchart [Mon, 11 Feb 2013 20:36:30 +0000 (21:36 +0100)]
modetest: Fix warnings
Enable all standard automake warnings except for -Wpointer-arith (as the
test pattern generation code uses void pointer arithmetics) and fix
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Rob Clark [Thu, 1 Aug 2013 21:52:13 +0000 (17:52 -0400)]
tests: add tilcdc to modetest/vbltest
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Chia-I Wu [Wed, 10 Jul 2013 02:49:59 +0000 (10:49 +0800)]
intel: silence valgrind warnings for unsynchronized maps
Mark the address ranges as accessible with VALGRIND_MAKE_MEM_DEFINED.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Thu, 22 Nov 2012 14:00:39 +0000 (16:00 +0200)]
libdrm: add missing DRM_CAP_TIMESTAMP_MONOTONIC
Just add the definition according the kernel's copy of drm.h
Signed-off-by: Imre Deak <imre.deak@intel.com>
Dave Airlie [Tue, 2 Jul 2013 08:24:53 +0000 (09:24 +0100)]
libdrm: bump to 2.4.46