Changes for U-Boot 1.1.4:
======================================================================
+* Add support for AMCC 440SPe CPU based eval board (Yucca).
+
+* Call serial_initialize() before first debug() is used.
+
* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
luan METROBOX MIP405 MIP405T \
ML2 ml300 ocotea OCRTC \
ORSG p3p440 PCI405 pcs440ep \
- PIP405 PLU405 PMC405 PPChameleonEVB \
- sbc405 VOH405 VOM405 W7OLMC \
+ PIP405 PLU405 PMC405 PPChameleonEVB \
+ sbc405 VOH405 VOM405 W7OLMC \
W7OLMG walnut WUH405 XPEDITE1K \
- yellowstone yosemite \
+ yellowstone yosemite yucca \
"
#########################################################################
yellowstone_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+yucca_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc
+
#########################################################################
## MPC8220 Systems
#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o cmd_yucca.o
+SOBJS = init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * hacked for evb440spe
+ */
+
+#include <common.h>
+#include <command.h>
+#include "yucca.h"
+#include <i2c.h>
+#include <asm/byteorder.h>
+
+extern void print_evb440spe_info(void);
+static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag,
+ int flag, int argc, char *argv[]);
+
+extern int cmd_get_data_size(char* arg, int default_size);
+
+/* ------------------------------------------------------------------------- */
+int do_evb440spe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ return setBootStrapClock (cmdtp, 1, flag, argc, argv);
+}
+
+/* ------------------------------------------------------------------------- */
+/* Modify memory.
+ *
+ * Syntax:
+ * evb440spe wrclk prom0,prom1
+ */
+static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
+ int argc, char *argv[])
+{
+ uchar chip;
+ ulong data;
+ int nbytes;
+ extern char console_buffer[];
+
+ char sysClock[4];
+ char cpuClock[4];
+ char plbClock[4];
+ char pcixClock[4];
+
+ if (argc < 3) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (strcmp(argv[2], "prom0") == 0)
+ chip = IIC0_BOOTPROM_ADDR;
+ else
+ chip = IIC0_ALT_BOOTPROM_ADDR;
+
+ do {
+ printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if ((strcmp(console_buffer, "33") != 0) &
+ (strcmp(console_buffer, "66") != 0))
+ nbytes=0;
+
+ strcpy(sysClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ do {
+ if (strcmp(sysClock, "66") == 0) {
+ printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+ } else {
+#ifdef CONFIG_STRESS
+ printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+#else
+ printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+#endif
+ }
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if (strcmp(sysClock, "66") == 0) {
+ if ((strcmp(console_buffer, "400") != 0) &
+ (strcmp(console_buffer, "533") != 0)
+#ifdef CONFIG_STRESS
+ & (strcmp(console_buffer, "667") != 0)
+#endif
+ ) {
+ nbytes = 0;
+ }
+ } else {
+ if ((strcmp(console_buffer, "400") != 0) &
+ (strcmp(console_buffer, "500") != 0) &
+ (strcmp(console_buffer, "533") != 0)
+#ifdef CONFIG_STRESS
+ & (strcmp(console_buffer, "667") != 0)
+#endif
+ ) {
+ nbytes = 0;
+ }
+ }
+
+ strcpy(cpuClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ if (strcmp(cpuClock, "500") == 0){
+ strcpy(plbClock, "166");
+ } else if (strcmp(cpuClock, "533") == 0){
+ strcpy(plbClock, "133");
+ } else {
+ do {
+ if (strcmp(cpuClock, "400") == 0)
+ printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+
+#ifdef CONFIG_STRESS
+ if (strcmp(cpuClock, "667") == 0)
+ printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+
+#endif
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if (strcmp(cpuClock, "400") == 0) {
+ if ((strcmp(console_buffer, "100") != 0) &
+ (strcmp(console_buffer, "133") != 0))
+ nbytes = 0;
+ }
+#ifdef CONFIG_STRESS
+ if (strcmp(cpuClock, "667") == 0) {
+ if ((strcmp(console_buffer, "133") != 0) &
+ (strcmp(console_buffer, "166") != 0))
+ nbytes = 0;
+ }
+#endif
+ strcpy(plbClock, console_buffer);
+
+ } while (nbytes == 0);
+ }
+
+ do {
+ printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if ((strcmp(console_buffer, "33") != 0) &
+ (strcmp(console_buffer, "66") != 0) &
+ (strcmp(console_buffer, "100") != 0) &
+ (strcmp(console_buffer, "133") != 0)) {
+ nbytes = 0;
+ }
+ strcpy(pcixClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ printf("\nsys clk = %sMhz\n", sysClock);
+ printf("cpu clk = %sMhz\n", cpuClock);
+ printf("plb clk = %sMhz\n", plbClock);
+ printf("Pci-X clk = %sMhz\n", pcixClock);
+
+ do {
+ printf("\npress [y] to write I2C bootstrap \n");
+ printf("or [n] to abort. \n");
+ printf("Don't forget to set board switches \n");
+ printf("according to your choice before re-starting \n");
+ printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n");
+
+ nbytes = readline (" ? ");
+ if (strcmp(console_buffer, "n") == 0)
+ return 0;
+
+ } while (nbytes == 0);
+
+ if (strcmp(sysClock, "33") == 0) {
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "100") == 0))
+ data = 0x8678c206;
+
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x8678c2c6;
+
+ if ((strcmp(cpuClock, "500") == 0))
+ data = 0x8778f2c6;
+
+ if ((strcmp(cpuClock, "533") == 0))
+ data = 0x87790252;
+
+#ifdef CONFIG_STRESS
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x87794256;
+
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "166") == 0))
+ data = 0x87794206;
+
+#endif
+ }
+ if (strcmp(sysClock, "66") == 0) {
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "100") == 0))
+ data = 0x84706206;
+
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x847062c6;
+
+ if ((strcmp(cpuClock, "533") == 0))
+ data = 0x85708206;
+
+#ifdef CONFIG_STRESS
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x8570a256;
+
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "166") == 0))
+ data = 0x8570a206;
+
+#endif
+ }
+
+#ifdef DEBUG
+ printf(" pin strap0 to write in i2c = %x\n", data);
+#endif /* DEBUG */
+
+ if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
+ printf("Error writing strap0 in %s\n", argv[2]);
+
+ if (strcmp(pcixClock, "33") == 0)
+ data = 0x00000701;
+
+ if (strcmp(pcixClock, "66") == 0)
+ data = 0x00000601;
+
+ if (strcmp(pcixClock, "100") == 0)
+ data = 0x00000501;
+
+ if (strcmp(pcixClock, "133") == 0)
+ data = 0x00000401;
+
+ if (strcmp(plbClock, "166") == 0)
+ data = data | 0x05950000;
+ else
+ data = data | 0x05A50000;
+
+#ifdef DEBUG
+ printf(" pin strap1 to write in i2c = %x\n", data);
+#endif /* DEBUG */
+
+ udelay(1000);
+ if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0)
+ printf("Error writing strap1 in %s\n", argv[2]);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ evb440spe, 3, 1, do_evb440spe,
+ "evb440spe - program the serial device strap\n",
+ "wrclk [prom0|prom1] - program the serial device strap\n"
+);
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440SPe Reference Platform (yucca) board
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xfffb0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+#include "yucca.h"
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*
+ * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
+ */
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+ {0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */
+ {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */
+ {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
+ {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
+ {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */
+ {0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 7:boot from */
+ {0xfff00000, 0xfff80000, 0xe7c00001}, /* 8:boot from small flash */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word_1(flash_info_t * info, ulong dest, ulong data);
+static int write_word_2(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
+#endif
+
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_STM:
+ printf("STM ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ case FLASH_MAN_SST:
+ printf("SST ");
+ break;
+ case FLASH_MAN_MX:
+ printf("MIXC ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ printf("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B:
+ printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM160B:
+ printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM033C:
+ printf("AM29LV033C (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A:
+ printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A:
+ printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_STMW320DT:
+ printf ("M29W320DT (32 M, top sector)\n");
+ break;
+ case FLASH_MXLV320T:
+ printf ("MXLV320T (32 Mbit, top sector)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " ");
+ }
+ printf("\n");
+ return;
+}
+
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ /* bit 0 used for big flash marking */
+ if ((ulong)addr & 0x1)
+ return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
+ else
+ return flash_get_size_1(addr, info);
+}
+
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ info->flash_id += FLASH_AMDLV033C;
+ info->sector_count = 64;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+static int wait_for_DQ7_1(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+ return flash_erase_2(info, s_first, s_last);
+ } else {
+ return flash_erase_1(info, s_first, s_last);
+ }
+}
+
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!", prot);
+
+ printf("\n");
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_1(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+
+ for (; cnt == 0 && i < 4; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ if ((rc = write_word(info, wp, data)) != 0)
+ return (rc);
+
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i)
+ data = (data << 8) | *src++;
+
+ if ((rc = write_word(info, wp, data)) != 0)
+ return (rc);
+
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0)
+ return (0);
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+ return write_word_2(info, dest, data);
+ } else {
+ return write_word_1(info, dest, data);
+ }
+}
+
+static int write_word_1(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i, flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data)
+ return (2);
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
+ }
+
+ return (0);
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+
+#undef CFG_FLASH_WORD_SIZE
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ int n;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+ info->flash_id = FLASH_MAN_MX;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 71;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+ info->flash_id += FLASH_STMW320DT;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+ info->flash_id += FLASH_MXLV320T;
+ info->sector_count = 71;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+ /* set sector offsets for top boot block type */
+ base += info->size;
+ i = info->sector_count;
+ /* 1 x 16k boot sector */
+ base -= 16 << 10;
+ --i;
+ info->start[i] = base;
+ /* 2 x 8k boot sectors */
+ for (n = 0; n < 2; ++n) {
+ base -= 8 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ /* 1 x 32k boot sector */
+ base -= 32 << 10;
+ --i;
+ info->start[i] = base;
+
+ while (i > 0) { /* 64k regular sectors */
+ base -= 64 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000a000;
+ info->start[i--] = base + info->size - 0x0000c000;
+ info->start[i--] = base + info->size - 0x0000e000;
+ info->start[i--] = base + info->size - 0x00010000;
+
+ for (; i >= 0; i--)
+ info->start[i] = base + i * 0x00010000;
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+
+ for (i = 4; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+
+ for (; i >= 0; i--)
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+static int wait_for_DQ7_2(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!", prot);
+
+ printf("\n");
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_2(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+static int write_word_2(flash_info_t * info, ulong dest, ulong data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data)
+ return (2);
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
+ }
+
+ return (0);
+}
+#endif /* CFG_FLASH_2ND_16BIT_DEV */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned short index = 0;
+ int i;
+ unsigned long val;
+ unsigned long ebc_boot_size;
+ unsigned long boot_selection;
+
+ mfsdr(sdr_pstrp0, val);
+ index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 28;
+
+ if ((index == 0xc) || (index == 8)) {
+ /*
+ * Boot Settings in IIC EEprom address 0xA8 or 0xA0
+ * Read Serial Device Strap Register1 in PPC440SPe
+ */
+ mfsdr(sdr_sdstp1, val);
+ boot_selection = val & SDR0_SDSTP1_BOOT_SEL_MASK;
+ ebc_boot_size = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
+
+ switch(boot_selection) {
+ case SDR0_SDSTP1_BOOT_SEL_EBC:
+ switch(ebc_boot_size) {
+ case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
+ index = 3;
+ break;
+ case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
+ index = 0;
+ break;
+ }
+ break;
+
+ case SDR0_SDSTP1_BOOT_SEL_PCI:
+ index = 1;
+ break;
+
+ }
+ } /*else if (index == 0) {*/
+/* if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/
+/* index = 8;*//* sram below op code flash -> new index 8*/
+/* }*/
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0)
+ continue;
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
+ &flash_info[i]);
+
+ flash_info[i].size = size_b[i];
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#if defined(CFG_ENV_ADDR_REDUND)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#endif
+#endif
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
--- /dev/null
+/*
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* port to AMCC 440SPE evaluatioon board - SG April 12,2005 */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
+#define TLB2(a) ((a) & 0x00000fbf)
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ;\
+0: mflr r0 ;\
+ mtlr r1 ;\
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CFG_FPGA_BASE,SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+
+ tlbentry(CFG_OPER_FLASH,SZ_16M,0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/yucca/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/yucca/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Port to AMCC-440SPE Evaluation Board SOP - April 2005
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include "yucca.h"
+
+void fpga_init (void);
+
+void get_sys_info(PPC440_SYS_INFO *board_cfg );
+int compare_to_true(char *str );
+char *remove_l_w_space(char *in_str );
+char *remove_t_w_space(char *in_str );
+int get_console_port(void);
+unsigned long ppcMfcpr(unsigned long cpr_reg);
+unsigned long ppcMfsdr(unsigned long sdr_reg);
+
+#define DEBUG_ENV
+#ifdef DEBUG_ENV
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+
+#define FALSE 0
+#define TRUE 1
+
+int board_early_init_f (void)
+{
+/*----------------------------------------------------------------------------+
+| Define Boot devices
++----------------------------------------------------------------------------*/
+#define BOOT_FROM_SMALL_FLASH 0x00
+#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01
+#define BOOT_FROM_PCI 0x02
+#define BOOT_DEVICE_UNKNOWN 0x03
+
+/*----------------------------------------------------------------------------+
+| EBC Devices Characteristics
+| Peripheral Bank Access Parameters - EBC_BxAP
+| Peripheral Bank Configuration Register - EBC_BxCR
++----------------------------------------------------------------------------*/
+
+/*
+ * Small Flash and FRAM
+ * BU Value
+ * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000
+ * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000
+ */
+#define EBC_BXAP_SMALL_FLASH EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(7) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(0) | \
+ EBC_BXAP_OEN_ENCODE(0) | \
+ EBC_BXAP_WBN_ENCODE(0) | \
+ EBC_BXAP_WBF_ENCODE(0) | \
+ EBC_BXAP_TH_ENCODE(0) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_DELAYED | \
+ EBC_BXAP_BEM_WRITEONLY | \
+ EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_SMALL_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \
+ EBC_BXCR_BS_16MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_8BIT
+
+#define EBC_BXCR_SMALL_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xe7000000) | \
+ EBC_BXCR_BS_16MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_8BIT
+
+/*
+ * Large Flash and SRAM
+ * BU Value
+ * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
+ * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
+*/
+#define EBC_BXAP_LARGE_FLASH EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(7) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(0) | \
+ EBC_BXAP_OEN_ENCODE(0) | \
+ EBC_BXAP_WBN_ENCODE(0) | \
+ EBC_BXAP_WBF_ENCODE(0) | \
+ EBC_BXAP_TH_ENCODE(0) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_DELAYED | \
+ EBC_BXAP_BEM_WRITEONLY | \
+ EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_LARGE_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \
+ EBC_BXCR_BS_16MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT
+
+#define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \
+ EBC_BXCR_BS_16MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT
+
+/*
+ * FPGA
+ * BU value :
+ * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
+ * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000
+ */
+#define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(11) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(10) | \
+ EBC_BXAP_OEN_ENCODE(1) | \
+ EBC_BXAP_WBN_ENCODE(1) | \
+ EBC_BXAP_WBF_ENCODE(1) | \
+ EBC_BXAP_TH_ENCODE(1) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_DELAYED | \
+ EBC_BXAP_BEM_RW | \
+ EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_FPGA_CS1 EBC_BXCR_BAS_ENCODE(0xe2000000) | \
+ EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT
+
+ unsigned long mfr;
+ /*
+ * Define Variables for EBC initialization depending on BOOTSTRAP option
+ */
+ unsigned long sdr0_pinstp, sdr0_sdstp1 ;
+ unsigned long bootstrap_settings, ebc_data_width, boot_selection;
+ int computed_boot_device = BOOT_DEVICE_UNKNOWN;
+
+ /*-------------------------------------------------------------------+
+ | Initialize EBC CONFIG -
+ | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+ | default value :
+ | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+ |
+ +-------------------------------------------------------------------*/
+ mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+ EBC_CFG_PTD_ENABLE |
+ EBC_CFG_RTC_16PERCLK |
+ EBC_CFG_ATC_PREVIOUS |
+ EBC_CFG_DTC_PREVIOUS |
+ EBC_CFG_CTC_PREVIOUS |
+ EBC_CFG_OEO_PREVIOUS |
+ EBC_CFG_EMC_DEFAULT |
+ EBC_CFG_PME_DISABLE |
+ EBC_CFG_PR_16);
+
+ /*-------------------------------------------------------------------+
+ |
+ | PART 1 : Initialize EBC Bank 1
+ | ==============================
+ | Bank1 is always associated to the EPLD.
+ | It has to be initialized prior to other banks settings computation
+ | since some board registers values may be needed to determine the
+ | boot type
+ |
+ +-------------------------------------------------------------------*/
+ mtebc(pb1ap, EBC_BXAP_FPGA);
+ mtebc(pb1cr, EBC_BXCR_FPGA_CS1);
+
+ /*-------------------------------------------------------------------+
+ |
+ | PART 2 : Determine which boot device was selected
+ | =================================================
+ |
+ | Read Pin Strap Register in PPC440SPe
+ | Result can either be :
+ | - Boot strap = boot from EBC 8bits => Small Flash
+ | - Boot strap = boot from PCI
+ | - Boot strap = IIC
+ | In case of boot from IIC, read Serial Device Strap Register1
+ |
+ | Result can either be :
+ | - Boot from EBC - EBC Bus Width = 8bits => Small Flash
+ | - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM
+ | - Boot from PCI
+ |
+ +-------------------------------------------------------------------*/
+ /* Read Pin Strap Register in PPC440SP */
+ sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
+ bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
+
+ switch (bootstrap_settings) {
+ case SDR0_PINSTP_BOOTSTRAP_SETTINGS0:
+ /*
+ * Strapping Option A
+ * Boot from EBC - 8 bits , Small Flash
+ */
+ computed_boot_device = BOOT_FROM_SMALL_FLASH;
+ break;
+ case SDR0_PINSTP_BOOTSTRAP_SETTINGS1:
+ /*
+ * Strappping Option B
+ * Boot from PCI
+ */
+ computed_boot_device = BOOT_FROM_PCI;
+ break;
+ case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN:
+ case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN:
+ /*
+ * Strapping Option C or D
+ * Boot Settings in IIC EEprom address 0x50 or 0x54
+ * Read Serial Device Strap Register1 in PPC440SPe
+ */
+ sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
+ boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
+ ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
+
+ switch (boot_selection) {
+ case SDR0_SDSTP1_ERPN_EBC:
+ switch (ebc_data_width) {
+ case SDR0_SDSTP1_EBCW_16_BITS:
+ computed_boot_device =
+ BOOT_FROM_LARGE_FLASH_OR_SRAM;
+ break;
+ case SDR0_SDSTP1_EBCW_8_BITS :
+ computed_boot_device = BOOT_FROM_SMALL_FLASH;
+ break;
+ }
+ break;
+
+ case SDR0_SDSTP1_ERPN_PCI:
+ computed_boot_device = BOOT_FROM_PCI;
+ break;
+ default:
+ /* should not occure */
+ computed_boot_device = BOOT_DEVICE_UNKNOWN;
+ }
+ break;
+ default:
+ /* should not be */
+ computed_boot_device = BOOT_DEVICE_UNKNOWN;
+ break;
+ }
+
+ /*-------------------------------------------------------------------+
+ |
+ | PART 3 : Compute EBC settings depending on selected boot device
+ | ====== ======================================================
+ |
+ | Resulting EBC init will be among following configurations :
+ |
+ | - Boot from EBC 8bits => boot from Small Flash selected
+ | EBC-CS0 = Small Flash
+ | EBC-CS2 = Large Flash and SRAM
+ |
+ | - Boot from EBC 16bits => boot from Large Flash or SRAM
+ | EBC-CS0 = Large Flash or SRAM
+ | EBC-CS2 = Small Flash
+ |
+ | - Boot from PCI
+ | EBC-CS0 = not initialized to avoid address contention
+ | EBC-CS2 = same as boot from Small Flash selected
+ |
+ +-------------------------------------------------------------------*/
+ unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
+ unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
+
+ switch (computed_boot_device) {
+ /*-------------------------------------------------------------------*/
+ case BOOT_FROM_PCI:
+ /*-------------------------------------------------------------------*/
+ /*
+ * By Default CS2 is affected to LARGE Flash
+ * do not initialize SMALL FLASH to avoid address contention
+ * Large Flash
+ */
+ ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH;
+ ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
+ break;
+
+ /*-------------------------------------------------------------------*/
+ case BOOT_FROM_SMALL_FLASH:
+ /*-------------------------------------------------------------------*/
+ ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH;
+ ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0;
+
+ /*
+ * Large Flash or SRAM
+ */
+ /* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */
+ ebc0_cs2_bxap_value = 0x048ff240;
+ ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
+ break;
+
+ /*-------------------------------------------------------------------*/
+ case BOOT_FROM_LARGE_FLASH_OR_SRAM:
+ /*-------------------------------------------------------------------*/
+ ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH;
+ ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0;
+
+ /* Small flash */
+ ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH;
+ ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2;
+ break;
+
+ /*-------------------------------------------------------------------*/
+ default:
+ /*-------------------------------------------------------------------*/
+ /* BOOT_DEVICE_UNKNOWN */
+ break;
+ }
+
+ mtebc(pb0ap, ebc0_cs0_bxap_value);
+ mtebc(pb0cr, ebc0_cs0_bxcr_value);
+ mtebc(pb2ap, ebc0_cs2_bxap_value);
+ mtebc(pb2cr, ebc0_cs2_bxcr_value);
+
+ /*--------------------------------------------------------------------+
+ | Interrupt controller setup for the AMCC 440SPe Evaluation board.
+ +--------------------------------------------------------------------+
+ +---------------------------------------------------------------------+
+ |Interrupt| Source | Pol. | Sensi.| Crit. |
+ +---------+-----------------------------------+-------+-------+-------+
+ | IRQ 00 | UART0 | High | Level | Non |
+ | IRQ 01 | UART1 | High | Level | Non |
+ | IRQ 02 | IIC0 | High | Level | Non |
+ | IRQ 03 | IIC1 | High | Level | Non |
+ | IRQ 04 | PCI0X0 MSG IN | High | Level | Non |
+ | IRQ 05 | PCI0X0 CMD Write | High | Level | Non |
+ | IRQ 06 | PCI0X0 Power Mgt | High | Level | Non |
+ | IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non |
+ | IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non |
+ | IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non |
+ | IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non |
+ | IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit |
+ | IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non |
+ | IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non |
+ | IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non |
+ | IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non |
+ | IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non |
+ | IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit |
+ | IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non |
+ | IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non |
+ | IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non |
+ | IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non |
+ | IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non |
+ | IRQ 23 | I2O Inbound Doorbell | High | Level | Non |
+ | IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non |
+ | IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non |
+ | IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non |
+ | IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non |
+ | IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non |
+ | IRQ 29 | GPT Down Count Timer | Rising| Edge | Non |
+ | IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non |
+ | IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. |
+ |----------------------------------------------------------------------
+ | IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non |
+ | IRQ 33 | MAL Serr | High | Level | Non |
+ | IRQ 34 | MAL Txde | High | Level | Non |
+ | IRQ 35 | MAL Rxde | High | Level | Non |
+ | IRQ 36 | DMC CE or DMC UE | High | Level | Non |
+ | IRQ 37 | EBC or UART2 | High |Lvl Edg| Non |
+ | IRQ 38 | MAL TX EOB | High | Level | Non |
+ | IRQ 39 | MAL RX EOB | High | Level | Non |
+ | IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non |
+ | IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non |
+ | IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non |
+ | IRQ 43 | L2 Cache | Risin | Edge | Non |
+ | IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non |
+ | IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non |
+ | IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non |
+ | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
+ | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
+ | IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non |
+ | IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non |
+ | IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non |
+ | IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
+ | IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non |
+ | IRQ 54 | DMA Error | High | Level | Non |
+ | IRQ 55 | DMA I2O Error | High | Level | Non |
+ | IRQ 56 | Serial ROM | High | Level | Non |
+ | IRQ 57 | PCIX0 Error | High | Edge | Non |
+ | IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non |
+ | IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non |
+ | IRQ 60 | EMAC0 Interrupt | High | Level | Non |
+ | IRQ 61 | EMAC0 Wake-up | High | Level | Non |
+ | IRQ 62 | Reserved | High | Level | Non |
+ | IRQ 63 | XOR | High | Level | Non |
+ |----------------------------------------------------------------------
+ | IRQ 64 | PE0 AL | High | Level | Non |
+ | IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
+ | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
+ | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
+ | IRQ 68 | PE0 TCR | High | Level | Non |
+ | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
+ | IRQ 70 | PE0 DCR Error | High | Level | Non |
+ | IRQ 71 | Reserved | N/A | N/A | Non |
+ | IRQ 72 | PE1 AL | High | Level | Non |
+ | IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
+ | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
+ | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
+ | IRQ 76 | PE1 TCR | High | Level | Non |
+ | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
+ | IRQ 78 | PE1 DCR Error | High | Level | Non |
+ | IRQ 79 | Reserved | N/A | N/A | Non |
+ | IRQ 80 | PE2 AL | High | Level | Non |
+ | IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
+ | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
+ | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
+ | IRQ 84 | PE2 TCR | High | Level | Non |
+ | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
+ | IRQ 86 | PE2 DCR Error | High | Level | Non |
+ | IRQ 87 | Reserved | N/A | N/A | Non |
+ | IRQ 88 | External IRQ(5) | Progr | Progr | Non |
+ | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
+ | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
+ | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
+ | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
+ | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
+ | IRQ 94 | Reserved | N/A | N/A | Non |
+ | IRQ 95 | Reserved | N/A | N/A | Non |
+ |---------------------------------------------------------------------
+ | IRQ 96 | PE0 INTA | High | Level | Non |
+ | IRQ 97 | PE0 INTB | High | Level | Non |
+ | IRQ 98 | PE0 INTC | High | Level | Non |
+ | IRQ 99 | PE0 INTD | High | Level | Non |
+ | IRQ 100 | PE1 INTA | High | Level | Non |
+ | IRQ 101 | PE1 INTB | High | Level | Non |
+ | IRQ 102 | PE1 INTC | High | Level | Non |
+ | IRQ 103 | PE1 INTD | High | Level | Non |
+ | IRQ 104 | PE2 INTA | High | Level | Non |
+ | IRQ 105 | PE2 INTB | High | Level | Non |
+ | IRQ 106 | PE2 INTC | High | Level | Non |
+ | IRQ 107 | PE2 INTD | Risin | Edge | Non |
+ | IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non |
+ | IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non |
+ | IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non |
+ | IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non |
+ | IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non |
+ | IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non |
+ | IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non |
+ | IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non |
+ | IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non |
+ | IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non |
+ | IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non |
+ | IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non |
+ | IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non |
+ | IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non |
+ | IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non |
+ | IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non |
+ | IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non |
+ | IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non |
+ | IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non |
+ | IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non |
+ +---------+-----------------------------------+-------+-------+------*/
+ /*--------------------------------------------------------------------+
+ | Put UICs in PowerPC440SPemode.
+ | Initialise UIC registers. Clear all interrupts. Disable all
+ | interrupts.
+ | Set critical interrupt values. Set interrupt polarities. Set
+ | interrupt trigger levels. Make bit 0 High priority. Clear all
+ | interrupts again.
+ +-------------------------------------------------------------------*/
+ mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic3er, 0x00000000); /* disable all interrupts */
+ mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical
+ * interrupts */
+ mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ * priority */
+ mtdcr (uic3sr, 0x00000000); /* clear all interrupts */
+ mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic2er, 0x00000000); /* disable all interrupts */
+ mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical
+ * interrupts */
+ mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */
+ mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ * priority */
+ mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
+ mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic1er, 0x00000000); /* disable all interrupts */
+ mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical
+ * interrupts */
+ mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */
+ mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ * priority */
+ mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
+ mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted
+ * cascade to be checked */
+ mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical
+ * interrupts */
+ mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ * priority */
+ mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
+ mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+
+ /* SDR0_MFR should be part of Ethernet init */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~SDR0_MFR_ECS_MASK;
+ /*mtsdr(sdr_mfr, mfr);*/
+ fpga_init();
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info (&sysinfo);
+
+ printf ("Board: AMCC 440SPe Evaluation Board\n");
+ printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ printf ("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+ printf ("\tDDR: %lu MHz\n", sysinfo.freqDDR / 1000000);
+ return 0;
+}
+
+static long int yucca_probe_for_dimms(void)
+{
+ long int dimm_installed[MAXDIMMS];
+ long int dimm_num, probe_result;
+ long int dimms_found = 0;
+ uchar dimm_addr = IIC0_DIMM0_ADDR;
+
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ /* check if there is a chip at the dimm address */
+ switch (dimm_num) {
+ case 0:
+ dimm_addr = IIC0_DIMM0_ADDR;
+ break;
+ case 1:
+ dimm_addr = IIC0_DIMM1_ADDR;
+ break;
+ }
+ probe_result = i2c_probe(dimm_addr);
+
+ if (probe_result == 0) {
+ dimm_installed[dimm_num] = TRUE;
+ dimms_found++;
+ debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num);
+ } else {
+ dimm_installed[dimm_num] = FALSE;
+ debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
+ }
+ }
+
+ if (dimms_found == 0) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ hang();
+ }
+
+ if (dimm_installed[0] != TRUE) {
+ printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
+ printf(" Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
+ hang();
+ }
+
+ return dimms_found;
+}
+
+/*************************************************************************
+ * init SDRAM controller with fixed value
+ * the initialization values are for 2x MICRON DDR2
+ * PN: MT18HTF6472DY-53EB2
+ * 512MB, DDR2, 533, CL4, ECC, REG
+ ************************************************************************/
+static long int fixed_sdram(void)
+{
+ long int yucca_dimms = 0;
+
+ yucca_dimms = yucca_probe_for_dimms();
+
+ /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT */
+ mtdcr( 0x10, 0x00000021 );
+ mtdcr( 0x11, 0x84000000 );
+
+ /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2 */
+ mtdcr( 0x10, 0x00000020 );
+ mtdcr( 0x11, 0x2D122000 );
+
+ /* SET MCIF0_CODT Die Termination On */
+ mtdcr( 0x10, 0x00000026 );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x2A800021 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x02800021 );
+
+ /* On-Die Termination for Bank 0 */
+ mtdcr( 0x10, 0x00000022 );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x18000000 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x06000000 );
+
+ /* On-Die Termination for Bank 1 */
+ mtdcr( 0x10, 0x00000023 );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x18000000 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x01800000 );
+
+ /* On-Die Termination for Bank 2 */
+ mtdcr( 0x10, 0x00000024 );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x01800000 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x00000000 );
+
+ /* On-Die Termination for Bank 3 */
+ mtdcr( 0x10, 0x00000025 );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x01800000 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x00000000 );
+
+ /* Refresh Time register (0x30) Refresh every 7.8125uS */
+ mtdcr( 0x10, 0x00000030 );
+ mtdcr( 0x11, 0x08200000 );
+
+ /* SET MCIF0_MMODE CL 4 */
+ mtdcr( 0x10, 0x00000088 );
+ mtdcr( 0x11, 0x00000642 );
+
+ /* MCIF0_MEMODE */
+ mtdcr( 0x10, 0x00000089 );
+ mtdcr( 0x11, 0x00000004 );
+
+ /*SET MCIF0_MB0CF */
+ mtdcr( 0x10, 0x00000040 );
+ mtdcr( 0x11, 0x00000201 );
+
+ /* SET MCIF0_MB1CF */
+ mtdcr( 0x10, 0x00000044 );
+ mtdcr( 0x11, 0x00000201 );
+
+ /* SET MCIF0_MB2CF */
+ mtdcr( 0x10, 0x00000048 );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x00000201 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x00000000 );
+
+ /* SET MCIF0_MB3CF */
+ mtdcr( 0x10, 0x0000004c );
+ if (yucca_dimms == 2)
+ mtdcr( 0x11, 0x00000201 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x11, 0x00000000 );
+
+ /* SET MCIF0_INITPLR0 # NOP */
+ mtdcr( 0x10, 0x00000050 );
+ mtdcr( 0x11, 0xB5380000 );
+
+ /* SET MCIF0_INITPLR1 # PRE */
+ mtdcr( 0x10, 0x00000051 );
+ mtdcr( 0x11, 0x82100400 );
+
+ /* SET MCIF0_INITPLR2 # EMR2 */
+ mtdcr( 0x10, 0x00000052 );
+ mtdcr( 0x11, 0x80820000 );
+
+ /* SET MCIF0_INITPLR3 # EMR3 */
+ mtdcr( 0x10, 0x00000053 );
+ mtdcr( 0x11, 0x80830000 );
+
+ /* SET MCIF0_INITPLR4 # EMR DLL ENABLE */
+ mtdcr( 0x10, 0x00000054 );
+ mtdcr( 0x11, 0x80810000 );
+
+ /* SET MCIF0_INITPLR5 # MR DLL RESET */
+ mtdcr( 0x10, 0x00000055 );
+ mtdcr( 0x11, 0x80800542 );
+
+ /* SET MCIF0_INITPLR6 # PRE */
+ mtdcr( 0x10, 0x00000056 );
+ mtdcr( 0x11, 0x82100400 );
+
+ /* SET MCIF0_INITPLR7 # Refresh */
+ mtdcr( 0x10, 0x00000057 );
+ mtdcr( 0x11, 0x8A080000 );
+
+ /* SET MCIF0_INITPLR8 # Refresh */
+ mtdcr( 0x10, 0x00000058 );
+ mtdcr( 0x11, 0x8A080000 );
+
+ /* SET MCIF0_INITPLR9 # Refresh */
+ mtdcr( 0x10, 0x00000059 );
+ mtdcr( 0x11, 0x8A080000 );
+
+ /* SET MCIF0_INITPLR10 # Refresh */
+ mtdcr( 0x10, 0x0000005A );
+ mtdcr( 0x11, 0x8A080000 );
+
+ /* SET MCIF0_INITPLR11 # MR */
+ mtdcr( 0x10, 0x0000005B );
+ mtdcr( 0x11, 0x80800442 );
+
+ /* SET MCIF0_INITPLR12 # EMR OCD Default*/
+ mtdcr( 0x10, 0x0000005C );
+ mtdcr( 0x11, 0x80810380 );
+
+ /* SET MCIF0_INITPLR13 # EMR OCD Exit */
+ mtdcr( 0x10, 0x0000005D );
+ mtdcr( 0x11, 0x80810000 );
+
+ /* 0x80: Adv Addr clock by 180 deg */
+ mtdcr( 0x10, 0x00000080 );
+ mtdcr( 0x11, 0x80000000 );
+
+ /* 0x21: Exit self refresh, set DC_EN */
+ mtdcr( 0x10, 0x00000021 );
+ mtdcr( 0x11, 0x28000000 );
+
+ /* 0x81: Write DQS Adv 90 + Fractional DQS Delay */
+ mtdcr( 0x10, 0x00000081 );
+ mtdcr( 0x11, 0x80000800 );
+
+ /* MCIF0_SDTR1 */
+ mtdcr( 0x10, 0x00000085 );
+ mtdcr( 0x11, 0x80201000 );
+
+ /* MCIF0_SDTR2 */
+ mtdcr( 0x10, 0x00000086 );
+ mtdcr( 0x11, 0x42103242 );
+
+ /* MCIF0_SDTR3 */
+ mtdcr( 0x10, 0x00000087 );
+ mtdcr( 0x11, 0x0C100D14 );
+
+ /* SET MQ0_B0BAS base addr 00000000 / 256MB */
+ mtdcr( 0x40, 0x0000F800 );
+
+ /* SET MQ0_B1BAS base addr 10000000 / 256MB */
+ mtdcr( 0x41, 0x0400F800 );
+
+ /* SET MQ0_B2BAS base addr 20000000 / 256MB */
+ if (yucca_dimms == 2)
+ mtdcr( 0x42, 0x0800F800 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x42, 0x00000000 );
+
+ /* SET MQ0_B3BAS base addr 30000000 / 256MB */
+ if (yucca_dimms == 2)
+ mtdcr( 0x43, 0x0C00F800 );
+ else if (yucca_dimms == 1)
+ mtdcr( 0x43, 0x00000000 );
+
+ /* SDRAM_RQDC */
+ mtdcr( 0x10, 0x00000070 );
+ mtdcr( 0x11, 0x8000003F );
+
+ /* SDRAM_RDCC */
+ mtdcr( 0x10, 0x00000078 );
+ mtdcr( 0x11, 0x80000000 );
+
+ /* SDRAM_RFDC */
+ mtdcr( 0x10, 0x00000074 );
+ mtdcr( 0x11, 0x00000220 );
+
+ return (yucca_dimms * 512) << 20;
+}
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+
+ dram_size = fixed_sdram();
+
+ return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*-------------------------------------------------------------------+
+ * The yucca board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*-------------------------------------------------------------------+
+ * Disable everything
+ *-------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*-------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options to not support sizes such as 128/256 MB.
+ *-------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+ out32r( PCIX0_BAR0, 0 );
+
+ /*-------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *-------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The yucca board is always configured as host. */
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+int misc_init_f (void)
+{
+ uint reg;
+#if defined(CONFIG_STRESS)
+ uint i ;
+ uint disp;
+#endif
+
+ out16(FPGA_REG10, (in16(FPGA_REG10) &
+ ~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) |
+ FPGA_REG10_10MHZ_ENABLE |
+ FPGA_REG10_100MHZ_ENABLE |
+ FPGA_REG10_GIGABIT_ENABLE |
+ FPGA_REG10_FULL_DUPLEX );
+
+ udelay(10000); /* wait 10ms */
+
+ out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH));
+
+ /* minimal init for PCIe */
+ /* pci express 0 Endpoint Mode */
+ mfsdr(SDR0_PE0DLPSET, reg);
+ reg &= (~0x00400000);
+ mtsdr(SDR0_PE0DLPSET, reg);
+ /* pci express 1 Rootpoint Mode */
+ mfsdr(SDR0_PE1DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE1DLPSET, reg);
+ /* pci express 2 Rootpoint Mode */
+ mfsdr(SDR0_PE2DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE2DLPSET, reg);
+
+ out16(FPGA_REG1C,(in16 (FPGA_REG1C) &
+ ~FPGA_REG1C_PE0_ROOTPOINT &
+ ~FPGA_REG1C_PE1_ENDPOINT &
+ ~FPGA_REG1C_PE2_ENDPOINT));
+
+#if defined(CONFIG_STRESS)
+ /*
+ * all this setting done by linux only needed by stress an charac. test
+ * procedure
+ * PCIe 1 Rootpoint PCIe2 Endpoint
+ * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver
+ * Power Level
+ */
+ for (i = 0, disp = 0; i < 8; i++, disp += 3) {
+ mfsdr(SDR0_PE0HSSSET1L0 + disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE0HSSSET1L0 + disp, reg);
+ }
+
+ /*
+ * PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver
+ * Power Level
+ */
+ for (i = 0, disp = 0; i < 4; i++, disp += 3) {
+ mfsdr(SDR0_PE1HSSSET1L0 + disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE1HSSSET1L0 + disp, reg);
+ }
+
+ /*
+ * PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver
+ * Power Level
+ */
+ for (i = 0, disp = 0; i < 4; i++, disp += 3) {
+ mfsdr(SDR0_PE2HSSSET1L0 + disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE2HSSSET1L0 + disp, reg);
+ }
+
+ reg = 0x21242222;
+ mtsdr(SDR0_PE2UTLSET1, reg);
+ reg = 0x11000000;
+ mtsdr(SDR0_PE2UTLSET2, reg);
+ /* pci express 1 Endpoint Mode */
+ reg = 0x00004000;
+ mtsdr(SDR0_PE2DLPSET, reg);
+
+ mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */
+#endif
+ return 0;
+}
+
+void fpga_init(void)
+{
+ /*
+ * by default sdram access is disabled by fpga
+ */
+ out16(FPGA_REG10, (in16 (FPGA_REG10) |
+ FPGA_REG10_SDRAM_ENABLE |
+ FPGA_REG10_ENABLE_DISPLAY ));
+
+ return;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return (ctrlc());
+}
+#endif
+
+/*---------------------------------------------------------------------------+
+ | onboard_pci_arbiter_selected => from EPLD
+ +---------------------------------------------------------------------------*/
+int onboard_pci_arbiter_selected(int core_pci)
+{
+#if 0
+ unsigned long onboard_pci_arbiter_sel;
+
+ onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK;
+
+ if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL)
+ return (BOARD_OPTION_SELECTED);
+ else
+#endif
+ return (BOARD_OPTION_NOT_SELECTED);
+}
+
+/*---------------------------------------------------------------------------+
+ | ppcMfcpr.
+ +---------------------------------------------------------------------------*/
+unsigned long ppcMfcpr(unsigned long cpr_reg)
+{
+ unsigned long msr;
+ unsigned long cpr_cfgaddr_temp;
+ unsigned long cpr_value;
+
+ msr = (mfmsr () & ~(MSR_EE));
+ cpr_cfgaddr_temp = mfdcr(CPR0_CFGADDR);
+ mtdcr(CPR0_CFGADDR, cpr_reg);
+ cpr_value = mfdcr(CPR0_CFGDATA);
+ mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
+ mtmsr(msr);
+
+ return (cpr_value);
+}
+
+/*----------------------------------------------------------------------------+
+| Indirect Access of the System DCR's (SDR)
+| ppcMfsdr
++----------------------------------------------------------------------------*/
+unsigned long ppcMfsdr(unsigned long sdr_reg)
+{
+ unsigned long msr;
+ unsigned long sdr_cfgaddr_temp;
+ unsigned long sdr_value;
+
+ msr = (mfmsr () & ~(MSR_EE));
+ sdr_cfgaddr_temp = mfdcr(SDR0_CFGADDR);
+ mtdcr(SDR0_CFGADDR, sdr_reg);
+ sdr_value = mfdcr(SDR0_CFGDATA);
+ mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
+ mtmsr(msr);
+
+ return (sdr_value);
+}
+
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __YUCCA_H_
+#define __YUCCA_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*----------------------------------------------------------------------------+
+| Defines
++----------------------------------------------------------------------------*/
+
+#define TMR_FREQ_EXT 25000000
+#define BOARD_UART_CLOCK 11059200
+
+#define BOARD_OPTION_SELECTED 1
+#define BOARD_OPTION_NOT_SELECTED 0
+
+#define ENGINEERING_CLOCK_CHECKING "clk_chk"
+#define ENGINEERING_EXTERNAL_CLOCK "ext_clk"
+
+#define ENGINEERING_CLOCK_CHECKING_DATA 1
+#define ENGINEERING_EXTERNAL_CLOCK_DATA 2
+
+/* ethernet definition */
+#define MAX_ENETMODE_PARM 3
+#define ENETMODE_NEG 0
+#define ENETMODE_SPEED 1
+#define ENETMODE_DUPLEX 2
+
+#define ENETMODE_AUTONEG 0
+#define ENETMODE_NO_AUTONEG 1
+#define ENETMODE_10 2
+#define ENETMODE_100 3
+#define ENETMODE_1000 4
+#define ENETMODE_HALF 5
+#define ENETMODE_FULL 6
+
+#define NUM_TLB_ENTRIES 64
+
+/*----------------------------------------------------------------------------+
+| TLB specific defines.
++----------------------------------------------------------------------------*/
+#define TLB_256MB_ALIGN_MASK 0xF0000000
+#define TLB_16MB_ALIGN_MASK 0xFF000000
+#define TLB_1MB_ALIGN_MASK 0xFFF00000
+#define TLB_256KB_ALIGN_MASK 0xFFFC0000
+#define TLB_64KB_ALIGN_MASK 0xFFFF0000
+#define TLB_16KB_ALIGN_MASK 0xFFFFC000
+#define TLB_4KB_ALIGN_MASK 0xFFFFF000
+#define TLB_1KB_ALIGN_MASK 0xFFFFFC00
+#define TLB_256MB_SIZE 0x10000000
+#define TLB_16MB_SIZE 0x01000000
+#define TLB_1MB_SIZE 0x00100000
+#define TLB_256KB_SIZE 0x00040000
+#define TLB_64KB_SIZE 0x00010000
+#define TLB_16KB_SIZE 0x00004000
+#define TLB_4KB_SIZE 0x00001000
+#define TLB_1KB_SIZE 0x00000400
+
+#define TLB_WORD0_EPN_MASK 0xFFFFFC00
+#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_V_MASK 0x00000200
+#define TLB_WORD0_V_ENABLE 0x00000200
+#define TLB_WORD0_V_DISABLE 0x00000000
+#define TLB_WORD0_TS_MASK 0x00000100
+#define TLB_WORD0_TS_1 0x00000100
+#define TLB_WORD0_TS_0 0x00000000
+#define TLB_WORD0_SIZE_MASK 0x000000F0
+#define TLB_WORD0_SIZE_1KB 0x00000000
+#define TLB_WORD0_SIZE_4KB 0x00000010
+#define TLB_WORD0_SIZE_16KB 0x00000020
+#define TLB_WORD0_SIZE_64KB 0x00000030
+#define TLB_WORD0_SIZE_256KB 0x00000040
+#define TLB_WORD0_SIZE_1MB 0x00000050
+#define TLB_WORD0_SIZE_16MB 0x00000070
+#define TLB_WORD0_SIZE_256MB 0x00000090
+#define TLB_WORD0_TPAR_MASK 0x0000000F
+#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD1_RPN_MASK 0xFFFFFC00
+#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_PAR1_MASK 0x00000300
+#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+#define TLB_WORD1_PAR1_0 0x00000000
+#define TLB_WORD1_PAR1_1 0x00000100
+#define TLB_WORD1_PAR1_2 0x00000200
+#define TLB_WORD1_PAR1_3 0x00000300
+#define TLB_WORD1_ERPN_MASK 0x0000000F
+#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD2_PAR2_MASK 0xC0000000
+#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
+#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
+#define TLB_WORD2_PAR2_0 0x00000000
+#define TLB_WORD2_PAR2_1 0x40000000
+#define TLB_WORD2_PAR2_2 0x80000000
+#define TLB_WORD2_PAR2_3 0xC0000000
+#define TLB_WORD2_U0_MASK 0x00008000
+#define TLB_WORD2_U0_ENABLE 0x00008000
+#define TLB_WORD2_U0_DISABLE 0x00000000
+#define TLB_WORD2_U1_MASK 0x00004000
+#define TLB_WORD2_U1_ENABLE 0x00004000
+#define TLB_WORD2_U1_DISABLE 0x00000000
+#define TLB_WORD2_U2_MASK 0x00002000
+#define TLB_WORD2_U2_ENABLE 0x00002000
+#define TLB_WORD2_U2_DISABLE 0x00000000
+#define TLB_WORD2_U3_MASK 0x00001000
+#define TLB_WORD2_U3_ENABLE 0x00001000
+#define TLB_WORD2_U3_DISABLE 0x00000000
+#define TLB_WORD2_W_MASK 0x00000800
+#define TLB_WORD2_W_ENABLE 0x00000800
+#define TLB_WORD2_W_DISABLE 0x00000000
+#define TLB_WORD2_I_MASK 0x00000400
+#define TLB_WORD2_I_ENABLE 0x00000400
+#define TLB_WORD2_I_DISABLE 0x00000000
+#define TLB_WORD2_M_MASK 0x00000200
+#define TLB_WORD2_M_ENABLE 0x00000200
+#define TLB_WORD2_M_DISABLE 0x00000000
+#define TLB_WORD2_G_MASK 0x00000100
+#define TLB_WORD2_G_ENABLE 0x00000100
+#define TLB_WORD2_G_DISABLE 0x00000000
+#define TLB_WORD2_E_MASK 0x00000080
+#define TLB_WORD2_E_ENABLE 0x00000080
+#define TLB_WORD2_E_DISABLE 0x00000000
+#define TLB_WORD2_UX_MASK 0x00000020
+#define TLB_WORD2_UX_ENABLE 0x00000020
+#define TLB_WORD2_UX_DISABLE 0x00000000
+#define TLB_WORD2_UW_MASK 0x00000010
+#define TLB_WORD2_UW_ENABLE 0x00000010
+#define TLB_WORD2_UW_DISABLE 0x00000000
+#define TLB_WORD2_UR_MASK 0x00000008
+#define TLB_WORD2_UR_ENABLE 0x00000008
+#define TLB_WORD2_UR_DISABLE 0x00000000
+#define TLB_WORD2_SX_MASK 0x00000004
+#define TLB_WORD2_SX_ENABLE 0x00000004
+#define TLB_WORD2_SX_DISABLE 0x00000000
+#define TLB_WORD2_SW_MASK 0x00000002
+#define TLB_WORD2_SW_ENABLE 0x00000002
+#define TLB_WORD2_SW_DISABLE 0x00000000
+#define TLB_WORD2_SR_MASK 0x00000001
+#define TLB_WORD2_SR_ENABLE 0x00000001
+#define TLB_WORD2_SR_DISABLE 0x00000000
+
+/*----------------------------------------------------------------------------+
+| Board specific defines.
++----------------------------------------------------------------------------*/
+#define NONCACHE_MEMORY_SIZE (64*1024)
+#define NONCACHE_AREA0_ENDOFFSET (64*1024)
+#define NONCACHE_AREA1_ENDOFFSET (32*1024)
+
+#define FLASH_SECTORSIZE 0x00010000
+
+/* SDRAM MICRON */
+#define SDRAM_MICRON 0x2C
+
+#define SDRAM_TRUE 1
+#define SDRAM_FALSE 0
+#define SDRAM_DDR1 1
+#define SDRAM_DDR2 2
+#define SDRAM_NONE 0
+#define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */
+#define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */
+#define MAXBANKSPERDIMM 2
+#define MAXRANKSPERDIMM 2
+#define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */
+#define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */
+#define ERROR_STR_LENGTH 256
+#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
+
+/*----------------------------------------------------------------------------+
+| SDR Configuration registers
++----------------------------------------------------------------------------*/
+/* Serial Device Strap Reg 0 */
+#define sdr_pstrp0 0x0040
+
+#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */
+#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */
+#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */
+
+#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */
+#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */
+#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */
+
+#define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */
+#define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */
+#define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */
+#define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */
+#define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */
+
+/* Serial Device Enabled - Addr = 0xA8 */
+#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
+/* Serial Device Enabled - Addr = 0xA4 */
+#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
+
+/* Pin Straps Reg */
+#define SDR0_PSTRP0 0x0040
+#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */
+
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */
+
+/* fpgareg - defines are in include/config/YUCCA.h */
+
+#define SDR0_CUST0_ENET3_MASK 0x00000080
+#define SDR0_CUST0_ENET3_COPPER 0x00000000
+#define SDR0_CUST0_ENET3_FIBER 0x00000080
+#define SDR0_CUST0_RGMII3_MASK 0x00000070
+#define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4)
+#define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07)
+#define SDR0_CUST0_RGMII3_DISAB 0x00000000
+#define SDR0_CUST0_RGMII3_RTBI 0x00000040
+#define SDR0_CUST0_RGMII3_RGMII 0x00000050
+#define SDR0_CUST0_RGMII3_TBI 0x00000060
+#define SDR0_CUST0_RGMII3_GMII 0x00000070
+#define SDR0_CUST0_ENET2_MASK 0x00000008
+#define SDR0_CUST0_ENET2_COPPER 0x00000000
+#define SDR0_CUST0_ENET2_FIBER 0x00000008
+#define SDR0_CUST0_RGMII2_MASK 0x00000007
+#define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
+#define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07)
+#define SDR0_CUST0_RGMII2_DISAB 0x00000000
+#define SDR0_CUST0_RGMII2_RTBI 0x00000004
+#define SDR0_CUST0_RGMII2_RGMII 0x00000005
+#define SDR0_CUST0_RGMII2_TBI 0x00000006
+#define SDR0_CUST0_RGMII2_GMII 0x00000007
+
+#define ONE_MILLION 1000000
+#define ONE_BILLION 1000000000
+
+/*----------------------------------------------------------------------------+
+| X
+| XX
+| XX XXX XXXXX XX XXX XXXXX
+| XX XX X XXX XX XX
+| XX XX XXXXXX XX XX
+| XX XX X XX XX XX XX
+| XXX XX XXXXX X XXXX XXX
++----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+| Declare Configuration values
++----------------------------------------------------------------------------*/
+
+typedef enum config_selection {
+ CONFIG_NOT_SELECTED,
+ CONFIG_SELECTED
+} config_selection_t;
+
+typedef enum config_list {
+ UART2_IN_SERVICE_MODE,
+ CPU_TRACE_MODE,
+ UART1_CTS_RTS,
+ CONFIG_NB
+} config_list_t;
+
+#define MAX_CONFIG_SELECT_NB 3
+
+#define BOARD_INFO_UART2_IN_SERVICE_MODE 1
+#define BOARD_INFO_CPU_TRACE_MODE 2
+#define BOARD_INFO_UART1_CTS_RTS_MODE 4
+
+void force_bup_config_selection(config_selection_t *confgi_select_P);
+void update_config_selection_table(config_selection_t *config_select_P);
+void display_config_selection(config_selection_t *config_select_P);
+
+/*----------------------------------------------------------------------------+
+| XX
+|
+| XXXX XX XXX XXX XXXX
+| XX XX XX XX XX XX
+| XX XXX XX XX XX XX XX
+| XX XX XXXXX XX XX XX
+| XXXX XX XXXX XXXX
+| XXXX
+|
+|
+|
+| +------------------------------------------------------------------+
+| | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O |
+| +----------------------+------------------+-----+------------+-----+
+| | | | | | |
+| | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | |
+| | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | |
+| | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | |
+| | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | |
+| | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | |
+| | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | |
+| | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA |
+| | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA |
+| | GPIO0_8 | PERREADY | I | TRCES4 | NA |
+| | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA |
+| | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA |
+| | GPIO0_11 | IRQ0 | I | TRCTS2 | NA |
+| | GPIO0_12 | IRQ1 | I | TRCTS3 | NA |
+| | GPIO0_13 | IRQ2 | I | TRCTS4 | NA |
+| | GPIO0_14 | IRQ3 | I | TRCTS5 | NA |
+| | GPIO0_15 | IRQ4 | I | TRCTS6 | NA |
+| | GPIO0_16 | IRQ5 | I | UART2RX | I |
+| | GPIO0_17 | PERBE0_N | O | UART2TX | O |
+| | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA |
+| | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA |
+| | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA |
+| | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA |
+| | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA |
+| | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA |
+| | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA |
+| | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA |
+| | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA |
+| | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA |
+| | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA |
+| | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA |
+| | GPIO0_30 | UART1RX | I | NA | NA |
+| | GPIO0_31 | UART1TX | O | NA | NA |
+| | | | | | |
+| +----------------------+------------------+-----+------------+-----+
+|
++----------------------------------------------------------------------------*/
+
+unsigned long auto_calc_speed(void);
+/*----------------------------------------------------------------------------+
+| Prototypes
++----------------------------------------------------------------------------*/
+void print_evb440spe_info(void);
+
+int onboard_pci_arbiter_selected(int core_pci);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __YUCCA_H_ */
print_num ("bootflags", bd->bi_bootflags );
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440SP)
print_str ("procfreq", strmhz(buf, bd->bi_procfreq));
print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq));
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
|| defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
- return &serial0_device;
+#if defined(CONFIG_UART1_CONSOLE)
+ return &serial1_device;
+#else
+ return &serial0_device;
+#endif
#else
#error No default console
#endif
* The PCI initialization sequence enable bit must be set ... if not abort
* pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long strap;
mfsdr(sdr_sdstp1,strap);
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
#elif defined(PCIX0_BRDGOPT1)
out32r( PCIX0_POM0SA, 0 ); /* disable */
out32r( PCIX0_POM1SA, 0 ); /* disable */
out32r( PCIX0_POM2SA, 0 ); /* disable */
+#if defined(CONFIG_440SPE)
+ out32r( PCIX0_POM0LAL, 0x10000000 );
+ out32r( PCIX0_POM0LAH, 0x0000000c );
+#else
out32r( PCIX0_POM0LAL, 0x00000000 );
out32r( PCIX0_POM0LAH, 0x00000003 );
+#endif
out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );
out32r( PCIX0_POM0PCIAH, 0x00000000 );
out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
+#if defined(CONFIG_440SPE)
+ unsigned long mfr;
+#endif
out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
}
/* EMAC RESET */
+#if defined(CONFIG_440SPE)
+ /* provide clocks for EMAC internal loopback */
+ mfsdr (sdr_mfr, mfr);
+ mfr |= 0x08000000;
+ mtsdr(sdr_mfr, mfr);
+#endif
+
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+#if defined(CONFIG_440SPE)
+ /* remove clocks for EMAC internal loopback */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~0x08000000;
+ mtsdr(sdr_mfr, mfr);
+#endif
+
+
#ifndef CONFIG_NETCONSOLE
hw_p->print_speed = 1; /* print speed message again next time */
#endif
return ((int)pfc1);
}
-#endif
+#endif /* CONFIG_440_GX */
static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
unsigned mode_reg;
unsigned short devnum;
unsigned short reg_short;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
sys_info_t sysinfo;
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
int ethgroup = -1;
#endif
#endif
+#if defined(CONFIG_440SPE)
+ unsigned long mfr;
+#endif
+
EMAC_4XX_HW_PST hw_p = dev->priv;
return -1;
}
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
hw_p->stats.pkts_tx = 0;
hw_p->stats.pkts_rx = 0;
hw_p->stats.pkts_handled = 0;
+ hw_p->print_speed = 1; /* print speed message again next time */
#endif
hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */
hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */
hw_p->tx_u_index = 0; /* Transmit User Queue Index */
-#if defined(CONFIG_440) && !defined(CONFIG_440SP)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
/* set RMII mode */
/* NOTE: 440GX spec states that mode is mutually exclusive */
/* NOTE: Therefore, disable all other EMACS, since we handle */
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
+#if defined(CONFIG_440SPE)
+ /* provide clocks for EMAC internal loopback */
+ mfsdr (sdr_mfr, mfr);
+ mfr |= 0x08000000;
+ mtsdr(sdr_mfr, mfr);
+#endif
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
__asm__ volatile ("eieio");
failsafe--;
}
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440SPE)
+ /* remove clocks for EMAC internal loopback */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~0x08000000;
+ mtsdr(sdr_mfr, mfr);
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
if (hw_p->first_init == 0) {
miiphy_reset (dev->name, reg);
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
-#if defined(CONFIG_440) && !defined(CONFIG_440SP)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
/* set the Mal configuration reg */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
/* set speed */
if (speed == _1000BASET) {
-#if defined(CONFIG_440SP)
-#define SDR0_PFC1_EM_1000 0x00200000
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long pfc1;
mfsdr (sdr_pfc1, pfc1);
pfc1 |= SDR0_PFC1_EM_1000;
/* set receive low/high water mark register */
#if defined(CONFIG_440)
- /* 440GP has a 64 byte burst length */
+ /* 440s has a 64 byte burst length */
out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
#else
/* 405s have a 16 byte burst length */
#if defined (CONFIG_440)
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/*
* Hack: On 440SP all enet irq sources are located on UIC1
* Needs some cleanup. --sr
#endif
/* set phy num and mode */
bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+ bis->bi_phymode[0] = 0;
+
#if defined(CONFIG_PHY1_ADDR)
bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+ bis->bi_phymode[1] = 0;
#endif
#if defined(CONFIG_440GX)
bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
- bis->bi_phymode[0] = 0;
- bis->bi_phymode[1] = 0;
bis->bi_phymode[2] = 2;
bis->bi_phymode[3] = 2;
-#if defined (CONFIG_440GX)
ppc_4xx_eth_setup_bridge(0, bis);
#endif
-#endif
for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) {
if (0 == virgin) {
/* set the MAL IER ??? names may change with new spec ??? */
+#if defined(CONFIG_440SPE)
+ mal_ier =
+ MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
+ MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
+#else
mal_ier =
MAL_IER_DE | MAL_IER_NE | MAL_IER_TE |
MAL_IER_OPBE | MAL_IER_PLBE;
+#endif
mtdcr (malesr, 0xffffffff); /* clear pending interrupts */
mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */
mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */
#else
emac0_dev = dev;
#endif
+
+#if defined(CONFIG_NET_MULTI)
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
miiphy_register (dev->name,
emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
-
+#endif
} /* end for each supported device */
return (1);
}
return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
unsigned long val;
mfsdr(sdr_sdstp1, val);
}
#endif
-#if defined(CONFIG_405EP)|| defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define I2C_BOOTROM
return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
unsigned long val;
mfsdr(sdr_sdcs, val);
puts("SP Rev. B");
break;
+ case PVR_440SPe_RA:
+ puts("SPe 3GA533C");
+ break;
+ case PVR_440SPe_RB:
+ puts("SPe 3GB533C");
+ break;
default:
printf (" UNKNOWN (PVR=%08x)", pvr);
break;
};
static struct irq_action irq_vecs[32];
+void uic0_interrupt( void * parms); /* UIC0 handler */
#if defined(CONFIG_440)
static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
static struct irq_action irq_vecs2[32]; /* For UIC2 */
-
-void uic0_interrupt( void * parms); /* UIC0 handler */
void uic2_interrupt( void * parms); /* UIC2 handler */
-#endif /* CONFIG_440GX */
+#endif /* CONFIG_440GX CONFIG_440SPE */
+
+#if defined(CONFIG_440SPE)
+static struct irq_action irq_vecs3[32]; /* For UIC3 */
+void uic3_interrupt( void * parms); /* UIC3 handler */
+#endif /* CONFIG_440SPE */
#endif /* CONFIG_440 */
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
irq_vecs2[vec].handler = NULL;
irq_vecs2[vec].arg = NULL;
irq_vecs2[vec].count = 0;
#endif /* CONFIG_440GX */
+#if defined(CONFIG_440SPE)
+ irq_vecs3[vec].handler = NULL;
+ irq_vecs3[vec].arg = NULL;
+ irq_vecs3[vec].count = 0;
+#endif /* CONFIG_440SPE */
#endif
}
} /* external_interrupt CONFIG_440GX */
+#elif defined(CONFIG_440SPE)
+void external_interrupt(struct pt_regs *regs)
+{
+ ulong uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ /* 440 SPe uses base uic register */
+ uic_msr = mfdcr(uic0msr);
+
+ if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
+ uic1_interrupt(0);
+
+ if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
+ uic2_interrupt(0);
+
+ if ( (UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr) )
+ uic3_interrupt(0);
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic0_interrupt(0);
+
+ mtdcr(uic0sr, uic_msr);
+
+ return;
+} /* external_interrupt CONFIG_440SPE */
+
#else
void external_interrupt(struct pt_regs *regs)
}
#endif
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
/* Handler for UIC0 interrupt */
void uic0_interrupt( void * parms)
{
}
#endif /* defined(CONFIG_440) */
-#if defined(CONFIG_440GX)
-/* Handler for UIC1 interrupt */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+/* Handler for UIC2 interrupt */
void uic2_interrupt( void * parms)
{
ulong uic2_msr;
(*irq_vecs2[vec].handler)(irq_vecs2[vec].arg);
} else {
mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> vec));
- printf ("Masking bogus interrupt vector (uic1) 0x%x\n", vec);
+ printf ("Masking bogus interrupt vector (uic2) 0x%x\n", vec);
}
/*
}
#endif /* defined(CONFIG_440GX) */
+#if defined(CONFIG_440SPE)
+/* Handler for UIC3 interrupt */
+void uic3_interrupt( void * parms)
+{
+ ulong uic3_msr;
+ ulong msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic3_msr = mfdcr(uic3msr);
+ msr_shift = uic3_msr;
+ vec = 0;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000) {
+ /*
+ * Increment irq counter (for debug purpose only)
+ */
+ irq_vecs3[vec].count++;
+
+ if (irq_vecs3[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs3[vec].handler)(irq_vecs3[vec].arg);
+ } else {
+ mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> vec));
+ printf ("Masking bogus interrupt vector (uic3) 0x%x\n", vec);
+ }
+
+ /*
+ * After servicing the interrupt, we have to remove the status indicator.
+ */
+ mtdcr(uic3sr, (0x80000000 >> vec));
+ }
+
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+#endif /* defined(CONFIG_440SPE) */
+
/****************************************************************************/
/*
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
if ((vec > 31) && (vec < 64)) {
i = vec - 32;
irqa = irq_vecs1;
irqa[i].arg = arg;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else if (vec > 63)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
if ((vec > 31) && (vec < 64)) {
irqa = irq_vecs1;
i = vec - 32;
#endif
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else if (vec > 63)
printf("\n");
#endif
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
printf ("\nUIC 2\n");
printf ("Nr Routine Arg Count\n");
printf("\n");
#endif
+#if defined(CONFIG_440SPE)
+ printf ("\nUIC 3\n");
+ printf ("Nr Routine Arg Count\n");
+
+ for (vec=0; vec<32; vec++) {
+ if (irq_vecs3[vec].handler != NULL)
+ printf ("%02d %08lx %08lx %d\n",
+ vec+63, (ulong)irq_vecs3[vec].handler,
+ (ulong)irq_vecs3[vec].arg, irq_vecs3[vec].count);
+ }
+ printf("\n");
+#endif
+
return 0;
}
#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
#include <405_mal.h>
#include <miiphy.h>
-
+#undef ET_DEBUG
/***********************************************************/
/* Dump out to the screen PHY regs */
/***********************************************************/
PHY_ANLPAR_10);
miiphy_write (devname, addr, PHY_ANAR, adv);
+ miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+ adv |= (0x0300);
+ miiphy_write (devname, addr, PHY_1000BTCR, adv);
+
/* Start/Restart aneg */
miiphy_read (devname, addr, PHY_BMCR, &ctl);
ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
/***********************************************************/
unsigned int miiphy_getemac_offset (void)
{
-#if (defined(CONFIG_440) && !defined(CONFIG_440SP)) && defined(CONFIG_NET_MULTI)
+#if (defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)) && defined(CONFIG_NET_MULTI)
unsigned long zmii;
unsigned long eoffset;
i = 0;
/* see if it is ready for sec */
- while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
+ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
udelay (7);
if (i > 5) {
-#if 0
+#ifdef ET_DEBUG
+ sta_reg = in32 (EMAC_STACR + emac_reg);
+ printf ("read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
printf ("read err 1\n");
#endif
return -1;
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX)
- sta_reg |= EMAC_STACR_READ;
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
+#else
+ sta_reg |= EMAC_STACR_READ;
+#endif
#else
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
-
+ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
out32 (EMAC_STACR + emac_reg, sta_reg);
-#if 0 /* test-only */
+#ifdef ET_DEBUG
printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
#endif
sta_reg = in32 (EMAC_STACR + emac_reg);
+#ifdef ET_DEBUG
+ printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
+#endif
i = 0;
- while ((sta_reg & EMAC_STACR_OC) == 0) {
+ while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
udelay (7);
if (i > 5) {
return -1;
}
i++;
sta_reg = in32 (EMAC_STACR + emac_reg);
+#ifdef ET_DEBUG
+ printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
+#endif
}
if ((sta_reg & EMAC_STACR_PHYE) != 0) {
return -1;
/* see if it is ready for 1000 nsec */
i = 0;
- while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
+ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
if (i > 5)
return -1;
udelay (7);
sta_reg = 0;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX)
- sta_reg |= EMAC_STACR_WRITE;
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
+#else
+ sta_reg |= EMAC_STACR_WRITE;
+#endif
#else
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
- sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */
+ sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
+ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
memcpy (&sta_reg, &value, 2); /* put in data */
out32 (EMAC_STACR + emac_reg, sta_reg);
/* wait for completion */
i = 0;
sta_reg = in32 (EMAC_STACR + emac_reg);
- while ((sta_reg & EMAC_STACR_OC) == 0) {
+#ifdef ET_DEBUG
+ printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
+#endif
+ while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
udelay (7);
if (i > 5)
return -1;
i++;
sta_reg = in32 (EMAC_STACR + emac_reg);
+#ifdef ET_DEBUG
+ printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
+#endif
}
if ((sta_reg & EMAC_STACR_PHYE) != 0)
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
#endif
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
#define UART0_SDR sdr_uart1
#define UART1_SDR sdr_uart0
#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
#endif /* CONFIG_440GX */
unsigned long tmp;
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
mfsdr(UART0_SDR,reg);
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
#else
udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
#endif /* CONFIG_405EP */
+
+#if !defined(CFG_EXT_SERIAL_CLOCK) && \
+ ( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE) )
+ serial_divs (gd->baudrate, &udiv, &bdiv);
+ tmp = udiv << CR0_UDIV_POS; /* set the UART divisor */
+#if defined(CONFIG_SERIAL_MULTI)
+ if (UART0_BASE == dev_base) {
+ mtsdr (UART0_SDR, tmp);
+ } else {
+ mtsdr (UART1_SDR, tmp);
+ }
+#else
+ mtsdr (UART0_SDR, tmp);
+#endif
+
+#else
+
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
+#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
#if defined(CONFIG_SERIAL_MULTI)
out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
DECLARE_GLOBAL_DATA_PTR;
#define ONE_BILLION 1000000000
-
+#ifdef DEBUG
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
return sys_info.freqPCI;
}
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP)
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
unsigned long m;
unsigned long prbdv0;
+#if defined(CONFIG_440SPE)
+ unsigned long sys_freq;
+ unsigned long sys_per=0;
+ unsigned long msr;
+ unsigned long pci_clock_per;
+ unsigned long sdr_ddrpll;
+
+ /*-------------------------------------------------------------------------+
+ | Get the system clock period.
+ +-------------------------------------------------------------------------*/
+ sys_per = determine_sysper();
+
+ msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
+
+ /*-------------------------------------------------------------------------+
+ | Calculate the system clock speed from the period.
+ +-------------------------------------------------------------------------*/
+ sys_freq=(ONE_BILLION/sys_per)*1000;
+#endif
+
/* Extract configured divisors */
mfsdr( sdr_sdstp0,strp0 );
mfsdr( sdr_sdstp1,strp1 );
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
+#if defined(CONFIG_440SPE)
+ sysInfo->freqVCOMhz = (m * sys_freq) ;
+#else
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+#endif
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+#if defined(CONFIG_440SPE)
+ /* Determine PCI Clock Period */
+ pci_clock_per = determine_pci_clock_per();
+ sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
+ mfsdr(sdr_ddr0, sdr_ddrpll);
+ sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+#endif
+
+
+}
+
+#endif
+
+#if defined(CONFIG_440SPE)
+unsigned long determine_sysper(void)
+{
+ unsigned int fpga_clocking_reg;
+ unsigned int master_clock_selection;
+ unsigned long master_clock_per = 0;
+ unsigned long fb_div_selection;
+ unsigned int vco_div_reg_value;
+ unsigned long vco_div_selection;
+ unsigned long sys_per = 0;
+ int extClkVal;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 0 and reg 1 to get FPGA reg information
+ +-------------------------------------------------------------------------*/
+ fpga_clocking_reg = in16(FPGA_REG16);
+
+
+ /* Determine Master Clock Source Selection */
+ master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
+
+ switch(master_clock_selection) {
+ case FPGA_REG16_MASTER_CLK_66_66:
+ master_clock_per = PERIOD_66_66MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_50:
+ master_clock_per = PERIOD_50_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_33_33:
+ master_clock_per = PERIOD_33_33MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_25:
+ master_clock_per = PERIOD_25_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_EXT:
+ if ((extClkVal==EXTCLK_33_33)
+ && (extClkVal==EXTCLK_50)
+ && (extClkVal==EXTCLK_66_66)
+ && (extClkVal==EXTCLK_83)) {
+ /* calculate master clock period from external clock value */
+ master_clock_per=(ONE_BILLION/extClkVal) * 1000;
+ } else {
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ break;
+ default:
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ break;
+ }
+
+ /* Determine FB divisors values */
+ if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_6;
+ else
+ fb_div_selection = FPGA_FB_DIV_12;
+ } else {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_10;
+ else
+ fb_div_selection = FPGA_FB_DIV_20;
+ }
+
+ /* Determine VCO divisors values */
+ vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
+
+ switch(vco_div_reg_value) {
+ case FPGA_REG16_VCO_DIV_4:
+ vco_div_selection = FPGA_VCO_DIV_4;
+ break;
+ case FPGA_REG16_VCO_DIV_6:
+ vco_div_selection = FPGA_VCO_DIV_6;
+ break;
+ case FPGA_REG16_VCO_DIV_8:
+ vco_div_selection = FPGA_VCO_DIV_8;
+ break;
+ case FPGA_REG16_VCO_DIV_10:
+ default:
+ vco_div_selection = FPGA_VCO_DIV_10;
+ break;
+ }
+
+ if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
+ switch(master_clock_per) {
+ case PERIOD_25_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_33_33MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_50_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_50_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_75_00MHZ;
+ }
+ break;
+ case PERIOD_66_66MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_66_66MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_100_00MHZ;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sys_per == 0) {
+ /* Other combinations are not supported */
+ DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ } else {
+ /* calcul system clock without cheking */
+ /* if engineering option clock no check is selected */
+ /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
+ sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
+ }
+
+ return(sys_per);
+
+}
+
+/*-------------------------------------------------------------------------+
+| determine_pci_clock_per.
++-------------------------------------------------------------------------*/
+unsigned long determine_pci_clock_per(void)
+{
+ unsigned long pci_clock_selection, pci_period;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 6 to get PCI 0 FPGA reg information
+ +-------------------------------------------------------------------------*/
+ pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
+
+
+ pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
+
+ switch (pci_clock_selection) {
+ case FPGA_REG16_PCI0_CLK_133_33:
+ pci_period = PERIOD_133_33MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_100:
+ pci_period = PERIOD_100_00MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_66_66:
+ pci_period = PERIOD_66_66MHZ;
+ break;
+ default:
+ pci_period = PERIOD_33_33MHZ;;
+ break;
+ }
+
+ return(pci_period);
}
#endif
/**************************************************************************/
_start_440:
+ /*----------------------------------------------------------------+
+ | Core bug fix. Clear the esr
+ +-----------------------------------------------------------------*/
+ addi r0,r0,0x0000
+ mtspr esr,r0
/*----------------------------------------------------------------*/
/* Clear and set up some registers. */
/*----------------------------------------------------------------*/
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* NOTE: 440GX adds machine check status regs */
mtspr mcsrr0,r0
mtspr mcsrr1,r0
mfspr r1, mcsr
ori r1,r1,0x6000 /* cache touch */
mtspr ccr0,r1
+#if defined (CONFIG_440SPE)
+ /*----------------------------------------------------------------+
+ | Initialize Core Configuration Reg1.
+ | a. ICDPEI: Record even parity. Normal operation.
+ | b. ICTPEI: Record even parity. Normal operation.
+ | c. DCTPEI: Record even parity. Normal operation.
+ | d. DCDPEI: Record even parity. Normal operation.
+ | e. DCUPEI: Record even parity. Normal operation.
+ | f. DCMPEI: Record even parity. Normal operation.
+ | g. FCOM: Normal operation
+ | h. MMUPEI: Record even parity. Normal operation.
+ | i. FFF: Flush only as much data as necessary.
+ | j. TCS: Timebase increments from externally supplied clock
+ +-----------------------------------------------------------------*/
+ addis r0, r0, 0x0000
+ ori r0, r0, 0x0080
+ mtspr ccr1, r0
+
+ /*----------------------------------------------------------------+
+ | Reset the timebase.
+ | The previous write to CCR1 sets the timebase source.
+ +-----------------------------------------------------------------*/
+ addi r0, r0, 0x0000
+ mtspr tbl, r0
+ mtspr tbu, r0
+#endif
+
/*----------------------------------------------------------------*/
/* Setup interrupt vectors */
/*----------------------------------------------------------------*/
mtspr ivlim,r1
mtspr dvlim,r1
+ /*----------------------------------------------------------------+
+ |Initialize MMUCR[STID] = 0.
+ +-----------------------------------------------------------------*/
+ mfspr r0,mmucr
+ addis r1,0,0xFFFF
+ ori r1,r1,0xFF00
+ and r0,r0,r1
+ mtspr mmucr,r0
+
/*----------------------------------------------------------------*/
/* Clear all TLB entries -- TID = 0, TS = 0 */
/*----------------------------------------------------------------*/
- mtspr mmucr,r0
+ addis r0,0,0x0000
li r1,0x003f /* 64 TLB entries */
mtctr r1
-0: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
+rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
+ tlbwe r0,r1,0x0001
+ tlbwe r0,r1,0x0002
subi r1,r1,0x0001
- bdnz 0b
+ bdnz rsttlb
/*----------------------------------------------------------------*/
/* TLB entry setup -- step thru tlbtab */
addi r3,r3,32
bdnz ..d_ag
#else
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
lis r1, 0x8003
ori r1,r1, 0x0980 /* fourth 64k */
mtdcr isram0_sb3cr,r1
+#elif defined(CONFIG_440SPE)
+ lis r1,0x0000 /* BAS = 0000_0000 */
+ ori r1,r1,0x0984 /* first 64k */
+ mtdcr isram0_sb0cr,r1
+ lis r1,0x0001
+ ori r1,r1,0x0984 /* second 64k */
+ mtdcr isram0_sb1cr,r1
+ lis r1, 0x0002
+ ori r1,r1, 0x0984 /* third 64k */
+ mtdcr isram0_sb2cr,r1
+ lis r1, 0x0003
+ ori r1,r1, 0x0984 /* fourth 64k */
+ mtdcr isram0_sb3cr,r1
#else
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
*/
.globl relocate_code
relocate_code:
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
cmplw 0, r7, r8
blt 4b
-#if !defined(CONFIG_440_GX)
+#if !defined(CONFIG_440_GX) && !defined(CONFIG_440SPE)
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtmsr r7 /* change MSR */
#ifndef _VECNUMS_H_
#define _VECNUMS_H_
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SPE)
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_IIC0 2 /* IIC0 */
+#define VECNUM_IIC1 3 /* IIC1 */
+#define VECNUM_PIM 4 /* PCI inbound message */
+#define VECNUM_PCRW 5 /* PCI command reg write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_MSI0 7 /* PCI MSI level 0 */
+#define VECNUM_MSI1 8 /* PCI MSI level 0 */
+#define VECNUM_MSI2 9 /* PCI MSI level 0 */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 1 ) /* MAL SERR */
+#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */
+#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */
+#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */
+#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */
+#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */
+#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
+#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
+
+/* UIC 2 */
+#define VECNUM_EIR5 (62 + 24) /* External interrupt 5 */
+#define VECNUM_EIR4 (62 + 25) /* External interrupt 4 */
+#define VECNUM_EIR3 (62 + 26) /* External interrupt 3 */
+#define VECNUM_EIR2 (62 + 27) /* External interrupt 2 */
+#define VECNUM_EIR1 (62 + 28) /* External interrupt 1 */
+#define VECNUM_EIR0 (62 + 29) /* External interrupt 0 */
+
+#elif defined(CONFIG_440SP)
/* UIC 0 */
#define VECNUM_U0 0 /* UART0 */
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \
#define MAL_ESR_PBEI 0x00000001
/* ^^ ^^ */
/* Mal IER */
+#ifdef CONFIG_440SPE
+#define MAL_IER_PT 0x00000080
+#define MAL_IER_PRE 0x00000040
+#define MAL_IER_PWE 0x00000020
+#define MAL_IER_DE 0x00000010
+#define MAL_IER_OTE 0x00000004
+#define MAL_IER_OE 0x00000002
+#define MAL_IER_PE 0x00000001
+#else
#define MAL_IER_DE 0x00000010
#define MAL_IER_NE 0x00000008
#define MAL_IER_TE 0x00000004
#define MAL_IER_OPBE 0x00000002
#define MAL_IER_PLBE 0x00000001
+#endif
/* MAL Channel Active Set and Reset Registers */
#define MAL_TXRX_CASR (0x80000000)
#define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19)
#define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20)
+#ifdef CONFIG_440SPE
+/*----------------------------------------------------------------------------+
+| Following instructions are not available in Book E mode of the GNU assembler.
++----------------------------------------------------------------------------*/
+#define DCCCI(ra,rb) .long 0x7c000000|\
+ (ra<<16)|(rb<<11)|(454<<1)
+
+#define ICCCI(ra,rb) .long 0x7c000000|\
+ (ra<<16)|(rb<<11)|(966<<1)
+
+#define DCREAD(rt,ra,rb) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(rb<<11)|(486<<1)
+
+#define ICREAD(ra,rb) .long 0x7c000000|\
+ (ra<<16)|(rb<<11)|(998<<1)
+
+#define TLBSX(rt,ra,rb) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
+
+#define TLBWE(rs,ra,ws) .long 0x7c000000|\
+ (rs<<21)|(ra<<16)|(ws<<11)|(978<<1)
+
+#define TLBRE(rt,ra,ws) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+
+#define TLBSXDOT(rt,ra,rb) .long 0x7c000001|\
+ (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
+
+#define MSYNC .long 0x7c000000|\
+ (598<<1)
+
+#define MBAR_INST .long 0x7c000000|\
+ (854<<1)
+
+/*----------------------------------------------------------------------------+
+| Following instruction is not available in PPC405 mode of the GNU assembler.
++----------------------------------------------------------------------------*/
+#define TLBRE(rt,ra,ws) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+
+#endif
#endif /* _PPC_MMU_H_ */
#define PVR_405EP_RB 0x51210950
#define PVR_440SP_RA 0x53221850
#define PVR_440SP_RB 0x53221891
+#define PVR_440SPe_RA 0x53421890
+#define PVR_440SPe_RB 0x53521891
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
# if defined(CONFIG_440)
typedef PPC440_SYS_INFO sys_info_t;
+# if defined(CONFIG_440SPE)
+ unsigned long determine_sysper(void);
+ unsigned long determine_pci_clock_per(void);
+# endif
# else
typedef PPC405_SYS_INFO sys_info_t;
# endif
--- /dev/null
+/*
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * 1 january 2005 Alain Saurel <asaurel@amcc.com>
+ * Adapted to current Das U-Boot source
+ ***********************************************************************/
+/************************************************************************
+ * yucca.h - configuration for AMCC 440SPe Ref (yucca)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG
+#undef DEBUG
+
+#define CONFIG_IDENT_STRING "\nU_440SPe_V1R01 level06"
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_440 1 /* ... PPC440 family */
+#define CONFIG_440SPE 1 /* Specifc SPe support */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#undef CFG_DRAM_TEST /* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+#define EXTCLK_33_33 33333333
+#define EXTCLK_66_66 66666666
+#define EXTCLK_50 50000000
+#define EXTCLK_83 83333333
+
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#undef CONFIG_SHOW_BOOT_PROGRESS
+#undef CONFIG_STRESS
+#undef ENABLE_ECC
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
+#define CFG_MONITOR_BASE 0xfffb0000 /* start of monitor */
+#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
+
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 0x90000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE2 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE3 0xb0000000 /* mapped pci memory */
+
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_TARGBASE 0x80000000 /*PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* #define CFG_PCI_BASE_IO 0xB8000000 */ /* internal PCI I-O */
+/* #define CFG_PCI_BASE_REGS 0xBEC00000 */ /* internal PCI regs */
+/* #define CFG_PCI_BASE_CYCLE 0xBED00000 */ /* internal PCI regs */
+
+#define CFG_FPGA_BASE 0xe2000000 /* epld */
+#define CFG_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
+
+/* #define CFG_NVRAM_BASE_ADDR 0x08000000 */
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI 1
+#undef CONFIG_UART1_CONSOLE
+
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK
+/* #define CFG_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */
+#define IIC0_DIMM0_ADDR 0x53
+#define IIC0_DIMM1_ADDR 0x52
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define IIC0_BOOTPROM_ADDR 0x50
+#define IIC0_ALT_BOOTPROM_ADDR 0x54
+
+/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}
+
+/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+/* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
+/* #endif */
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/* #define CFG_NVRAM_SIZE (0x2000 - 8) */ /* NVRAM size(8k)- RTC regs */
+
+#undef CFG_ENV_IS_IN_NVRAM /* ... not in NVRAM */
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
+#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
+#define CONFIG_ENV_OVERWRITE 1
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200n8 root=/dev/nfs rw"
+#define CONFIG_BOOTCOMMAND "bootm E7C00000" /* autoboot command */
+#define CONFIG_BOOTDELAY -1 /* -1 to disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#undef CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_IPADDR 192.168.80.10
+#define CONFIG_ETHADDR 00:04:AC:01:CA:FE
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 192.168.1.1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loads_echo=1\0" \
+ "netdev=eth0\0" \
+ "hostname=yucca\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk-4.0/ppc_4xx\0" \
+ "bootfile=yucca/uImage\0" \
+ "kernel_addr=E7F10000\0" \
+ "ramdisk_addr=E7F20000\0" \
+ "load=tftp 100000 yuca/u-boot.bin\0" \
+ "update=protect off 2:4-7;era 2:4-7;" \
+ "cp.b ${fileaddr} fffc0000 ${filesize};" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_NET | \
+ CFG_CMD_MII | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#define CFG_FLASH_2ND_16BIT_DEV 1 /* evb440SPe has 8 and 16bit device */
+#define CFG_FLASH_2ND_ADDR 0xe7c00000 /* evb440SPe has 8 and 16bit device*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR 0xfffa0000
+/* #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */
+#define CFG_ENV_SIZE 0x10000 /* Size of Environment vars */
+#endif /* CFG_ENV_IS_IN_FLASH */
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW i /* show pci devices on startup */
+#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#undef CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */
+
+/*
+ * NETWORK Support (PCI):
+ */
+/* Support for Intel 82557/82559/82559ER chips. */
+#define CONFIG_EEPRO100
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* FB Divisor selection */
+#define FPGA_FB_DIV_6 6
+#define FPGA_FB_DIV_10 10
+#define FPGA_FB_DIV_12 12
+#define FPGA_FB_DIV_20 20
+
+/* VCO Divisor selection */
+#define FPGA_VCO_DIV_4 4
+#define FPGA_VCO_DIV_6 6
+#define FPGA_VCO_DIV_8 8
+#define FPGA_VCO_DIV_10 10
+
+/*----------------------------------------------------------------------------+
+| FPGA registers and bit definitions
++----------------------------------------------------------------------------*/
+/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */
+/* TLB initialization makes it correspond to logical address 0xE2000000. */
+/* => Done init_chip.s in bootlib */
+#define FPGA_REG_BASE_ADDR 0xE2000000
+#define FPGA_GPIO_BASE_ADDR 0xE2010000
+#define FPGA_INT_BASE_ADDR 0xE2020000
+
+/*----------------------------------------------------------------------------+
+| Display
++----------------------------------------------------------------------------*/
+#define PPC440SPE_DISPLAY FPGA_REG_BASE_ADDR
+
+#define PPC440SPE_DISPLAY_D8 (FPGA_REG_BASE_ADDR+0x06)
+#define PPC440SPE_DISPLAY_D4 (FPGA_REG_BASE_ADDR+0x04)
+#define PPC440SPE_DISPLAY_D2 (FPGA_REG_BASE_ADDR+0x02)
+#define PPC440SPE_DISPLAY_D1 (FPGA_REG_BASE_ADDR+0x00)
+/*define WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/
+/*#define IOREG8(addr) *((volatile unsigned char *)(addr))*/
+
+/*----------------------------------------------------------------------------+
+| ethernet/reset/boot Register 1
++----------------------------------------------------------------------------*/
+#define FPGA_REG10 (FPGA_REG_BASE_ADDR+0x10)
+
+#define FPGA_REG10_10MHZ_ENABLE 0x8000
+#define FPGA_REG10_100MHZ_ENABLE 0x4000
+#define FPGA_REG10_GIGABIT_ENABLE 0x2000
+#define FPGA_REG10_FULL_DUPLEX 0x1000 /* force Full Duplex*/
+#define FPGA_REG10_RESET_ETH 0x0800
+#define FPGA_REG10_AUTO_NEG_DIS 0x0400
+#define FPGA_REG10_INTP_ETH 0x0200
+
+#define FPGA_REG10_RESET_HISR 0x0080
+#define FPGA_REG10_ENABLE_DISPLAY 0x0040
+#define FPGA_REG10_RESET_SDRAM 0x0020
+#define FPGA_REG10_OPER_BOOT 0x0010
+#define FPGA_REG10_SRAM_BOOT 0x0008
+#define FPGA_REG10_SMALL_BOOT 0x0004
+#define FPGA_REG10_FORCE_COLA 0x0002
+#define FPGA_REG10_COLA_MANUAL 0x0001
+
+#define FPGA_REG10_SDRAM_ENABLE 0x0020
+
+#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/
+#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/
+
+/*----------------------------------------------------------------------------+
+| MUX control
++----------------------------------------------------------------------------*/
+#define FPGA_REG12 (FPGA_REG_BASE_ADDR+0x12)
+
+#define FPGA_REG12_EBC_CTL 0x8000
+#define FPGA_REG12_UART1_CTS_RTS 0x4000
+#define FPGA_REG12_UART0_RX_ENABLE 0x2000
+#define FPGA_REG12_UART1_RX_ENABLE 0x1000
+#define FPGA_REG12_UART2_RX_ENABLE 0x0800
+#define FPGA_REG12_EBC_OUT_ENABLE 0x0400
+#define FPGA_REG12_GPIO0_OUT_ENABLE 0x0200
+#define FPGA_REG12_GPIO1_OUT_ENABLE 0x0100
+#define FPGA_REG12_GPIO_SELECT 0x0010
+#define FPGA_REG12_GPIO_CHREG 0x0008
+#define FPGA_REG12_GPIO_CLK_CHREG 0x0004
+#define FPGA_REG12_GPIO_OETRI 0x0002
+#define FPGA_REG12_EBC_ERROR 0x0001
+
+/*----------------------------------------------------------------------------+
+| PCI Clock control
++----------------------------------------------------------------------------*/
+#define FPGA_REG16 (FPGA_REG_BASE_ADDR+0x16)
+
+#define FPGA_REG16_PCI_CLK_CTL0 0x8000
+#define FPGA_REG16_PCI_CLK_CTL1 0x4000
+#define FPGA_REG16_PCI_CLK_CTL2 0x2000
+#define FPGA_REG16_PCI_CLK_CTL3 0x1000
+#define FPGA_REG16_PCI_CLK_CTL4 0x0800
+#define FPGA_REG16_PCI_CLK_CTL5 0x0400
+#define FPGA_REG16_PCI_CLK_CTL6 0x0200
+#define FPGA_REG16_PCI_CLK_CTL7 0x0100
+#define FPGA_REG16_PCI_CLK_CTL8 0x0080
+#define FPGA_REG16_PCI_CLK_CTL9 0x0040
+#define FPGA_REG16_PCI_EXT_ARB0 0x0020
+#define FPGA_REG16_PCI_MODE_1 0x0010
+#define FPGA_REG16_PCI_TARGET_MODE 0x0008
+#define FPGA_REG16_PCI_INTP_MODE 0x0004
+
+/* FB1 Divisor selection */
+#define FPGA_REG16_FB2_DIV_MASK 0x1000
+#define FPGA_REG16_FB2_DIV_LOW 0x0000
+#define FPGA_REG16_FB2_DIV_HIGH 0x1000
+/* FB2 Divisor selection */
+/* S3 switch on Board */
+#define FPGA_REG16_FB1_DIV_MASK 0x2000
+#define FPGA_REG16_FB1_DIV_LOW 0x0000
+#define FPGA_REG16_FB1_DIV_HIGH 0x2000
+/* PCI0 Clock Selection */
+/* S3 switch on Board */
+#define FPGA_REG16_PCI0_CLK_MASK 0x0c00
+#define FPGA_REG16_PCI0_CLK_33_33 0x0000
+#define FPGA_REG16_PCI0_CLK_66_66 0x0800
+#define FPGA_REG16_PCI0_CLK_100 0x0400
+#define FPGA_REG16_PCI0_CLK_133_33 0x0c00
+/* VCO Divisor selection */
+/* S3 switch on Board */
+#define FPGA_REG16_VCO_DIV_MASK 0xc000
+#define FPGA_REG16_VCO_DIV_4 0x0000
+#define FPGA_REG16_VCO_DIV_8 0x4000
+#define FPGA_REG16_VCO_DIV_6 0x8000
+#define FPGA_REG16_VCO_DIV_10 0xc000
+/* Master Clock Selection */
+/* S3, S4 switches on Board */
+#define FPGA_REG16_MASTER_CLK_MASK 0x01c0
+#define FPGA_REG16_MASTER_CLK_EXT 0x0000
+#define FPGA_REG16_MASTER_CLK_66_66 0x0040
+#define FPGA_REG16_MASTER_CLK_50 0x0080
+#define FPGA_REG16_MASTER_CLK_33_33 0x00c0
+#define FPGA_REG16_MASTER_CLK_25 0x0100
+
+/*----------------------------------------------------------------------------+
+| PCI Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG18 (FPGA_REG_BASE_ADDR+0x18)
+
+#define FPGA_REG18_PCI_PRSNT1 0x8000
+#define FPGA_REG18_PCI_PRSNT2 0x4000
+#define FPGA_REG18_PCI_INTA 0x2000
+#define FPGA_REG18_PCI_SLOT0_INTP 0x1000
+#define FPGA_REG18_PCI_SLOT1_INTP 0x0800
+#define FPGA_REG18_PCI_SLOT2_INTP 0x0400
+#define FPGA_REG18_PCI_SLOT3_INTP 0x0200
+#define FPGA_REG18_PCI_PCI0_VC 0x0100
+#define FPGA_REG18_PCI_PCI0_VTH1 0x0080
+#define FPGA_REG18_PCI_PCI0_VTH2 0x0040
+#define FPGA_REG18_PCI_PCI0_VTH3 0x0020
+
+/*----------------------------------------------------------------------------+
+| PCIe Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG1A (FPGA_REG_BASE_ADDR+0x1A)
+
+#define FPGA_REG1A_PE0_GLED 0x8000
+#define FPGA_REG1A_PE1_GLED 0x4000
+#define FPGA_REG1A_PE2_GLED 0x2000
+#define FPGA_REG1A_PE0_YLED 0x1000
+#define FPGA_REG1A_PE1_YLED 0x0800
+#define FPGA_REG1A_PE2_YLED 0x0400
+#define FPGA_REG1A_PE0_PWRON 0x0200
+#define FPGA_REG1A_PE1_PWRON 0x0100
+#define FPGA_REG1A_PE2_PWRON 0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010
+#define FPGA_REG1A_PE_SPREAD0 0x0008
+#define FPGA_REG1A_PE_SPREAD1 0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0 0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1 0x0001
+
+/*----------------------------------------------------------------------------+
+| PCIe Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG1C (FPGA_REG_BASE_ADDR+0x1C)
+
+#define FPGA_REG1C_PE0_ROOTPOINT 0x8000
+#define FPGA_REG1C_PE1_ENDPOINT 0x4000
+#define FPGA_REG1C_PE2_ENDPOINT 0x2000
+#define FPGA_REG1C_PE0_PRSNT 0x1000
+#define FPGA_REG1C_PE1_PRSNT 0x0800
+#define FPGA_REG1C_PE2_PRSNT 0x0400
+#define FPGA_REG1C_PE0_WAKE 0x0080
+#define FPGA_REG1C_PE1_WAKE 0x0040
+#define FPGA_REG1C_PE2_WAKE 0x0020
+#define FPGA_REG1C_PE0_PERST 0x0010
+#define FPGA_REG1C_PE1_PERST 0x0080
+#define FPGA_REG1C_PE2_PERST 0x0040
+
+/*----------------------------------------------------------------------------+
+| Defines
++----------------------------------------------------------------------------*/
+#define PERIOD_133_33MHZ 7500 /* 7,5ns */
+#define PERIOD_100_00MHZ 10000 /* 10ns */
+#define PERIOD_83_33MHZ 12000 /* 12ns */
+#define PERIOD_75_00MHZ 13333 /* 13,333ns */
+#define PERIOD_66_66MHZ 15000 /* 15ns */
+#define PERIOD_50_00MHZ 20000 /* 20ns */
+#define PERIOD_33_33MHZ 30000 /* 30ns */
+#define PERIOD_25_00MHZ 40000 /* 40ns */
+
+/*---------------------------------------------------------------------------*/
+
+#endif /* __CONFIG_H */
/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
+#define xer_reg 0x001
+#define lr_reg 0x008
#define dec 0x016 /* decrementer */
#define srr0 0x01a /* save/restore register 0 */
#define srr1 0x01b /* save/restore register 1 */
#define ivpr 0x03f /* interrupt prefix register */
#define usprg0 0x100 /* user special purpose register general 0 */
#define usprg1 0x110 /* user special purpose register general 1 */
+#define tblr 0x10c /* time base lower, read only */
+#define tbur 0x10d /* time base upper, read only */
#define sprg1 0x111 /* special purpose register general 1 */
#define sprg2 0x112 /* special purpose register general 2 */
#define sprg3 0x113 /* special purpose register general 3 */
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
#define sdr_malrbl 0x02a0
#define sdr_maltbs 0x02c0
#define sdr_malrbs 0x02e0
-#define sdr_pci0 0x0300
-#define sdr_usb0 0x0320
+#define sdr_pci0 0x0300
+#define sdr_usb0 0x0320
#define sdr_cust0 0x4000
-#define sdr_sdstp2 0x4001
#define sdr_cust1 0x4002
-#define sdr_sdstp3 0x4003
#define sdr_pfc0 0x4100 /* Pin Function 0 */
#define sdr_pfc1 0x4101 /* Pin Function 1 */
#define sdr_plbtr 0x4200
#define mem_dlycal 0x0084 /* delay line calibration register */
#define mem_eccesr 0x0098 /* ECC error status */
+#ifdef CONFIG_440_GX
+#define sdr_amp 0x0240
+#define sdr_xpllc 0x01c1
+#define sdr_xplld 0x01c2
+#define sdr_xcr 0x01c0
+#define sdr_sdstp2 0x4001
+#define sdr_sdstp3 0x4003
+#endif /* CONFIG_440_GX */
+
+#ifdef CONFIG_440SPE
+#undef sdr_sdstp2
+#define sdr_sdstp2 0x0022
+#undef sdr_sdstp3
+#define sdr_sdstp3 0x0023
+#define sdr_ddr0 0x00E1
+#define sdr_uart2 0x0122
+#define sdr_xcr0 0x01c0
+/* #define sdr_xcr1 0x01c3 only one PCIX - SG */
+/* #define sdr_xcr2 0x01c6 only one PCIX - SG */
+#define sdr_xpllc0 0x01c1
+#define sdr_xplld0 0x01c2
+#define sdr_xpllc1 0x01c4 /*notRCW - SG */
+#define sdr_xplld1 0x01c5 /*notRCW - SG */
+#define sdr_xpllc2 0x01c7 /*notRCW - SG */
+#define sdr_xplld2 0x01c8 /*notRCW - SG */
+#define sdr_amp0 0x0240
+#define sdr_amp1 0x0241
+#define sdr_cust2 0x4004
+#define sdr_cust3 0x4006
+#define sdr_sdstp4 0x4001
+#define sdr_sdstp5 0x4003
+#define sdr_sdstp6 0x4005
+#define sdr_sdstp7 0x4007
+
+/*----------------------------------------------------------------------------+
+| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
++----------------------------------------------------------------------------*/
+#define CCR0_PRE 0x40000000
+#define CCR0_CRPE 0x08000000
+#define CCR0_DSTG 0x00200000
+#define CCR0_DAPUIB 0x00100000
+#define CCR0_DTB 0x00008000
+#define CCR0_GICBT 0x00004000
+#define CCR0_GDCBT 0x00002000
+#define CCR0_FLSTA 0x00000100
+#define CCR0_ICSLC_MASK 0x0000000C
+#define CCR0_ICSLT_MASK 0x00000003
+#define CCR1_TCS_MASK 0x00000080
+#define CCR1_TCS_INTCLK 0x00000000
+#define CCR1_TCS_EXTCLK 0x00000080
+#define MMUCR_SEOA 0x01000000
+#define MMUCR_U1TE 0x00400000
+#define MMUCR_U2SWOAE 0x00200000
+#define MMUCR_DULXE 0x00800000
+#define MMUCR_IULXE 0x00400000
+#define MMUCR_STS 0x00100000
+#define MMUCR_STID_MASK 0x000000FF
+
+#define SDR0_CFGADDR 0x00E
+#define SDR0_CFGDATA 0x00F
+
+/******************************************************************************
+ * PCI express defines
+ ******************************************************************************/
+#define SDR0_PE0UTLSET1 0x00000300 /* PE0 Upper transaction layer conf setting */
+#define SDR0_PE0UTLSET2 0x00000301 /* PE0 Upper transaction layer conf setting 2 */
+#define SDR0_PE0DLPSET 0x00000302 /* PE0 Data link & logical physical configuration */
+#define SDR0_PE0LOOP 0x00000303 /* PE0 Loopback interface status */
+#define SDR0_PE0RCSSET 0x00000304 /* PE0 Reset, clock & shutdown setting */
+#define SDR0_PE0RCSSTS 0x00000305 /* PE0 Reset, clock & shutdown status */
+#define SDR0_PE0HSSSET1L0 0x00000306 /* PE0 HSS Control Setting 1: Lane 0 */
+#define SDR0_PE0HSSSET2L0 0x00000307 /* PE0 HSS Control Setting 2: Lane 0 */
+#define SDR0_PE0HSSSTSL0 0x00000308 /* PE0 HSS Control Status : Lane 0 */
+#define SDR0_PE0HSSSET1L1 0x00000309 /* PE0 HSS Control Setting 1: Lane 1 */
+#define SDR0_PE0HSSSET2L1 0x0000030A /* PE0 HSS Control Setting 2: Lane 1 */
+#define SDR0_PE0HSSSTSL1 0x0000030B /* PE0 HSS Control Status : Lane 1 */
+#define SDR0_PE0HSSSET1L2 0x0000030C /* PE0 HSS Control Setting 1: Lane 2 */
+#define SDR0_PE0HSSSET2L2 0x0000030D /* PE0 HSS Control Setting 2: Lane 2 */
+#define SDR0_PE0HSSSTSL2 0x0000030E /* PE0 HSS Control Status : Lane 2 */
+#define SDR0_PE0HSSSET1L3 0x0000030F /* PE0 HSS Control Setting 1: Lane 3 */
+#define SDR0_PE0HSSSET2L3 0x00000310 /* PE0 HSS Control Setting 2: Lane 3 */
+#define SDR0_PE0HSSSTSL3 0x00000311 /* PE0 HSS Control Status : Lane 3 */
+#define SDR0_PE0HSSSET1L4 0x00000312 /* PE0 HSS Control Setting 1: Lane 4 */
+#define SDR0_PE0HSSSET2L4 0x00000313 /* PE0 HSS Control Setting 2: Lane 4 */
+#define SDR0_PE0HSSSTSL4 0x00000314 /* PE0 HSS Control Status : Lane 4 */
+#define SDR0_PE0HSSSET1L5 0x00000315 /* PE0 HSS Control Setting 1: Lane 5 */
+#define SDR0_PE0HSSSET2L5 0x00000316 /* PE0 HSS Control Setting 2: Lane 5 */
+#define SDR0_PE0HSSSTSL5 0x00000317 /* PE0 HSS Control Status : Lane 5 */
+#define SDR0_PE0HSSSET1L6 0x00000318 /* PE0 HSS Control Setting 1: Lane 6 */
+#define SDR0_PE0HSSSET2L6 0x00000319 /* PE0 HSS Control Setting 2: Lane 6 */
+#define SDR0_PE0HSSSTSL6 0x0000031A /* PE0 HSS Control Status : Lane 6 */
+#define SDR0_PE0HSSSET1L7 0x0000031B /* PE0 HSS Control Setting 1: Lane 7 */
+#define SDR0_PE0HSSSET2L7 0x0000031C /* PE0 HSS Control Setting 2: Lane 7 */
+#define SDR0_PE0HSSSTSL7 0x0000031D /* PE0 HSS Control Status : Lane 7 */
+#define SDR0_PE0HSSSEREN 0x0000031E /* PE0 Serdes Transmitter Enable */
+#define SDR0_PE0LANEABCD 0x0000031F /* PE0 Lanes ABCD affectation */
+#define SDR0_PE0LANEEFGH 0x00000320 /* PE0 Lanes EFGH affectation */
+
+#define SDR0_PE1UTLSET1 0x00000340 /* PE1 Upper transaction layer conf setting */
+#define SDR0_PE1UTLSET2 0x00000341 /* PE1 Upper transaction layer conf setting 2 */
+#define SDR0_PE1DLPSET 0x00000342 /* PE1 Data link & logical physical configuration */
+#define SDR0_PE1LOOP 0x00000343 /* PE1 Loopback interface status */
+#define SDR0_PE1RCSSET 0x00000344 /* PE1 Reset, clock & shutdown setting */
+#define SDR0_PE1RCSSTS 0x00000345 /* PE1 Reset, clock & shutdown status */
+#define SDR0_PE1HSSSET1L0 0x00000346 /* PE1 HSS Control Setting 1: Lane 0 */
+#define SDR0_PE1HSSSET2L0 0x00000347 /* PE1 HSS Control Setting 2: Lane 0 */
+#define SDR0_PE1HSSSTSL0 0x00000348 /* PE1 HSS Control Status : Lane 0 */
+#define SDR0_PE1HSSSET1L1 0x00000349 /* PE1 HSS Control Setting 1: Lane 1 */
+#define SDR0_PE1HSSSET2L1 0x0000034A /* PE1 HSS Control Setting 2: Lane 1 */
+#define SDR0_PE1HSSSTSL1 0x0000034B /* PE1 HSS Control Status : Lane 1 */
+#define SDR0_PE1HSSSET1L2 0x0000034C /* PE1 HSS Control Setting 1: Lane 2 */
+#define SDR0_PE1HSSSET2L2 0x0000034D /* PE1 HSS Control Setting 2: Lane 2 */
+#define SDR0_PE1HSSSTSL2 0x0000034E /* PE1 HSS Control Status : Lane 2 */
+#define SDR0_PE1HSSSET1L3 0x0000034F /* PE1 HSS Control Setting 1: Lane 3 */
+#define SDR0_PE1HSSSET2L3 0x00000350 /* PE1 HSS Control Setting 2: Lane 3 */
+#define SDR0_PE1HSSSTSL3 0x00000351 /* PE1 HSS Control Status : Lane 3 */
+#define SDR0_PE1HSSSEREN 0x00000352 /* PE1 Serdes Transmitter Enable */
+#define SDR0_PE1LANEABCD 0x00000353 /* PE1 Lanes ABCD affectation */
+#define SDR0_PE2UTLSET1 0x00000370 /* PE2 Upper transaction layer conf setting */
+#define SDR0_PE2UTLSET2 0x00000371 /* PE2 Upper transaction layer conf setting 2 */
+#define SDR0_PE2DLPSET 0x00000372 /* PE2 Data link & logical physical configuration */
+#define SDR0_PE2LOOP 0x00000373 /* PE2 Loopback interface status */
+#define SDR0_PE2RCSSET 0x00000374 /* PE2 Reset, clock & shutdown setting */
+#define SDR0_PE2RCSSTS 0x00000375 /* PE2 Reset, clock & shutdown status */
+#define SDR0_PE2HSSSET1L0 0x00000376 /* PE2 HSS Control Setting 1: Lane 0 */
+#define SDR0_PE2HSSSET2L0 0x00000377 /* PE2 HSS Control Setting 2: Lane 0 */
+#define SDR0_PE2HSSSTSL0 0x00000378 /* PE2 HSS Control Status : Lane 0 */
+#define SDR0_PE2HSSSET1L1 0x00000379 /* PE2 HSS Control Setting 1: Lane 1 */
+#define SDR0_PE2HSSSET2L1 0x0000037A /* PE2 HSS Control Setting 2: Lane 1 */
+#define SDR0_PE2HSSSTSL1 0x0000037B /* PE2 HSS Control Status : Lane 1 */
+#define SDR0_PE2HSSSET1L2 0x0000037C /* PE2 HSS Control Setting 1: Lane 2 */
+#define SDR0_PE2HSSSET2L2 0x0000037D /* PE2 HSS Control Setting 2: Lane 2 */
+#define SDR0_PE2HSSSTSL2 0x0000037E /* PE2 HSS Control Status : Lane 2 */
+#define SDR0_PE2HSSSET1L3 0x0000037F /* PE2 HSS Control Setting 1: Lane 3 */
+#define SDR0_PE2HSSSET2L3 0x00000380 /* PE2 HSS Control Setting 2: Lane 3 */
+#define SDR0_PE2HSSSTSL3 0x00000381 /* PE2 HSS Control Status : Lane 3 */
+#define SDR0_PE2HSSSEREN 0x00000382 /* PE2 Serdes Transmitter Enable */
+#define SDR0_PE2LANEABCD 0x00000383 /* PE2 Lanes ABCD affectation */
+#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */
+#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */
+#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
+
+/*----------------------------------------------------------------------------+
+| SDRAM Controller
++----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------+
+| SDRAM DLYCAL Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
+#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+
+/*----------------------------------------------------------------------------+
+| Memory queue defines
++----------------------------------------------------------------------------*/
+/* A REVOIR versus RWC - SG*/
+#define SDRAMQ_DCR_BASE 0x040
+
+#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
+#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
+#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
+#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
+#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
+#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
+#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
+#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
+#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
+#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
+#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
+#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
+#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
+#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
+#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
+
+/*-----------------------------------------------------------------------------+
+| Memory Bank 0-7 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
+#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2)
+#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2)
+#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
+#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6)
+#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF)
+#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
+#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
+#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
+#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
+#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
+#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
+#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
+#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
+#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
+#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
+#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
+
+/*----------------------------------------------------------------------------+
+| Memory controller defines
++----------------------------------------------------------------------------*/
+#define SDRAMC_DCR_BASE 0x010
+#define SDRAMC_CFGADDR (SDRAMC_DCR_BASE+0x0) /* Memory configuration add */
+#define SDRAMC_CFGDATA (SDRAMC_DCR_BASE+0x1) /* Memory configuration data */
+
+/* A REVOIR versus specs 4 bank - SG*/
+#define SDRAM_MCSTAT 0x14 /* memory controller status */
+#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
+#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
+#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
+#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
+#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
+#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
+#define SDRAM_CODT 0x26 /* on die termination for controller */
+#define SDRAM_VVPR 0x27 /* variable VRef programmming */
+#define SDRAM_OPARS 0x28 /* on chip driver control setup */
+#define SDRAM_OPART 0x29 /* on chip driver control trigger */
+#define SDRAM_RTR 0x30 /* refresh timer */
+#define SDRAM_PMIT 0x34 /* power management idle timer */
+#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
+#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
+#define SDRAM_MB2CF 0x48
+#define SDRAM_MB3CF 0x4C
+#define SDRAM_INITPLR0 0x50 /* manual initialization control */
+#define SDRAM_INITPLR1 0x51 /* manual initialization control */
+#define SDRAM_INITPLR2 0x52 /* manual initialization control */
+#define SDRAM_INITPLR3 0x53 /* manual initialization control */
+#define SDRAM_INITPLR4 0x54 /* manual initialization control */
+#define SDRAM_INITPLR5 0x55 /* manual initialization control */
+#define SDRAM_INITPLR6 0x56 /* manual initialization control */
+#define SDRAM_INITPLR7 0x57 /* manual initialization control */
+#define SDRAM_INITPLR8 0x58 /* manual initialization control */
+#define SDRAM_INITPLR9 0x59 /* manual initialization control */
+#define SDRAM_INITPLR10 0x5a /* manual initialization control */
+#define SDRAM_INITPLR11 0x5b /* manual initialization control */
+#define SDRAM_INITPLR12 0x5c /* manual initialization control */
+#define SDRAM_INITPLR13 0x5d /* manual initialization control */
+#define SDRAM_INITPLR14 0x5e /* manual initialization control */
+#define SDRAM_INITPLR15 0x5f /* manual initialization control */
+#define SDRAM_RQDC 0x70 /* read DQS delay control */
+#define SDRAM_RFDC 0x74 /* read feedback delay control */
+#define SDRAM_RDCC 0x78 /* read data capture control */
+#define SDRAM_DLCR 0x7A /* delay line calibration */
+#define SDRAM_CLKTR 0x80 /* DDR clock timing */
+#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
+#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
+#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
+#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
+#define SDRAM_MMODE 0x88 /* memory mode */
+#define SDRAM_MEMODE 0x89 /* memory extended mode */
+#define SDRAM_ECCCR 0x98 /* ECC error status */
+#define SDRAM_CID 0xA4 /* core ID */
+#define SDRAM_RID 0xA8 /* revision ID */
+
+/*-----------------------------------------------------------------------------+
+| Memory Controller Status
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
+#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
+#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
+#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
+#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
+
+/*-----------------------------------------------------------------------------+
+| Memory Controller Options 1
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
+#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
+#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
+#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
+#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
+#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
+#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
+#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
+#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
+#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
+#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
+#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
+#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
+#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
+#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
+#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
+#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
+#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
+#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
+#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
+#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
+#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
+#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
+#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
+#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
+#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
+#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
+
+/*-----------------------------------------------------------------------------+
+| Memory Controller Options 2
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
+#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
+#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
+#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
+#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
+#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
+#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
+#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
+#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
+#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
+#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
+#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
+#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Refresh Timer Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK 0xFFF80000
+#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
+#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Read DQS Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RQDC_RQDE_MASK 0x80000000
+#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
+#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
+#define SDRAM_RQDC_RQFD_MASK 0x000001FF
+#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+
+#define SDRAM_RQDC_RQFD_MAX 0x1FF
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Read Data Capture Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RDCC_RDSS_MASK 0xC0000000
+#define SDRAM_RDCC_RDSS_T1 0x00000000
+#define SDRAM_RDCC_RDSS_T2 0x40000000
+#define SDRAM_RDCC_RDSS_T3 0x80000000
+#define SDRAM_RDCC_RDSS_T4 0xC0000000
+#define SDRAM_RDCC_RSAE_MASK 0x00000001
+#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
+#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Read Feedback Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RFDC_ARSE_MASK 0x80000000
+#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
+#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
+#define SDRAM_RFDC_RFOS_MASK 0x007F0000
+#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK 0x000003FF
+#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+
+#define SDRAM_RFDC_RFFD_MAX 0x7FF
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Delay Line Calibration Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLCR_DCLM_MASK 0x80000000
+#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
+#define SDRAM_DLCR_DCLM_AUTO 0x00000000
+#define SDRAM_DLCR_DLCR_MASK 0x08000000
+#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
+#define SDRAM_DLCR_DLCR_IDLE 0x00000000
+#define SDRAM_DLCR_DLCS_MASK 0x07000000
+#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
+#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
+#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
+#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
+#define SDRAM_DLCR_DLCS_ERROR 0x04000000
+#define SDRAM_DLCR_DLCV_MASK 0x000001FF
+#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Controller On Die Termination Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CODT_ODT_ON 0x80000000
+#define SDRAM_CODT_ODT_OFF 0x00000000
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
+#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
+#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
+#define SDRAM_CODT_DQS_MASK 0x00000010
+#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
+#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
+#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
+#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
+#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
+#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
+#define SDRAM_CODT_IO_HIZ 0x00000000
+#define SDRAM_CODT_IO_NMODE 0x00000001
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MMODE_WR_MASK 0x00000E00
+#define SDRAM_MMODE_WR_DDR1 0x00000000
+#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
+#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
+#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
+#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
+#define SDRAM_MMODE_DCL_MASK 0x00000070
+#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
+#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
+#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
+#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
+#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
+#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
+#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
+#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
+#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Extended Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MEMODE_DIC_MASK 0x00000002
+#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
+#define SDRAM_MEMODE_DIC_WEAK 0x00000002
+#define SDRAM_MEMODE_DLL_MASK 0x00000001
+#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
+#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
+#define SDRAM_MEMODE_RTT_MASK 0x00000044
+#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
+#define SDRAM_MEMODE_RTT_75OHM 0x00000004
+#define SDRAM_MEMODE_RTT_150OHM 0x00000040
+#define SDRAM_MEMODE_DQS_MASK 0x00000400
+#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
+#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Clock Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM Write Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_WRDTR_LLWP_MASK 0x10000000
+#define SDRAM_WRDTR_LLWP_DIS 0x10000000
+#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
+#define SDRAM_WRDTR_WTR_MASK 0x0E000000
+#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
+#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
+#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM SDTR1 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR1_LDOF_MASK 0x80000000
+#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
+#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
+#define SDRAM_SDTR1_RTW_MASK 0x00F00000
+#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
+#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
+#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
+#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
+#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
+#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
+#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
+#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
+
+/*-----------------------------------------------------------------------------+
+| SDRAM SDTR2 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR2_RCD_MASK 0xF0000000
+#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
+#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
+#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
+#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
+#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
+#define SDRAM_SDTR2_WTR_MASK 0x0F000000
+#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
+#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
+#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
+#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
+#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
+#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
+#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
+#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
+#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
+#define SDRAM_SDTR2_WPC_MASK 0x0000F000
+#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
+#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
+#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
+#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
+#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
+#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
+#define SDRAM_SDTR2_RPC_MASK 0x00000F00
+#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
+#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
+#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
+#define SDRAM_SDTR2_RP_MASK 0x000000F0
+#define SDRAM_SDTR2_RP_3_CLK 0x00000030
+#define SDRAM_SDTR2_RP_4_CLK 0x00000040
+#define SDRAM_SDTR2_RP_5_CLK 0x00000050
+#define SDRAM_SDTR2_RP_6_CLK 0x00000060
+#define SDRAM_SDTR2_RP_7_CLK 0x00000070
+#define SDRAM_SDTR2_RRD_MASK 0x0000000F
+#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
+#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
+
+/*-----------------------------------------------------------------------------+
+| SDRAM SDTR3 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR3_RAS_MASK 0x1F000000
+#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define SDRAM_SDTR3_RC_MASK 0x001F0000
+#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define SDRAM_SDTR3_XCS_MASK 0x00001F00
+#define SDRAM_SDTR3_XCS 0x00000D00
+#define SDRAM_SDTR3_RFC_MASK 0x0000003F
+#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+
+/*-----------------------------------------------------------------------------+
+| Memory Bank 0-1 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
+#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
+#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
+#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
+#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
+#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
+#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
+#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
+#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
+#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
+#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
+#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
+#endif /* CONFIG_440SPE */
+
+#ifndef CONFIG_440_GX
+#endif /* not CONFIG_440SPE */
+
/*-----------------------------------------------------------------------------
| External Bus Controller
+----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------
| L2 Cache
+----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define L2_CACHE_BASE 0x030
#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
#define CNTRL_DCR_BASE 0x0b0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+#if defined(CONFIG_440SPE)
+#define UIC2_DCR_BASE 0xe0
+#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */
+#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */
+#define uic2er (UIC0_DCR_BASE+0x2) /* UIC2 enable */
+#define uic2cr (UIC0_DCR_BASE+0x3) /* UIC2 critical */
+#define uic2pr (UIC0_DCR_BASE+0x4) /* UIC2 polarity */
+#define uic2tr (UIC0_DCR_BASE+0x5) /* UIC2 triggering */
+#define uic2msr (UIC0_DCR_BASE+0x6) /* UIC2 masked status */
+#define uic2vr (UIC0_DCR_BASE+0x7) /* UIC2 vector */
+#define uic2vcr (UIC0_DCR_BASE+0x8) /* UIC2 vector configuration */
+
+#define UIC3_DCR_BASE 0xf0
+#define uic3sr (UIC1_DCR_BASE+0x0) /* UIC3 status-Read Clear */
+#define uic3srs (UIC0_DCR_BASE+0x1) /* UIC3 status-Read Set */
+#define uic3er (UIC1_DCR_BASE+0x2) /* UIC3 enable */
+#define uic3cr (UIC1_DCR_BASE+0x3) /* UIC3 critical */
+#define uic3pr (UIC1_DCR_BASE+0x4) /* UIC3 polarity */
+#define uic3tr (UIC1_DCR_BASE+0x5) /* UIC3 triggering */
+#define uic3msr (UIC1_DCR_BASE+0x6) /* UIC3 masked status */
+#define uic3vr (UIC1_DCR_BASE+0x7) /* UIC3 vector */
+#define uic3vcr (UIC1_DCR_BASE+0x8) /* UIC3 vector configuration */
+#endif /* CONFIG_440SPE */
+
#if defined(CONFIG_440GX)
#define UIC2_DCR_BASE 0x210
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
#define uicvr uic0vr
#define uicvcr uic0vcr
+#if defined(CONFIG_440SPE)
+/*----------------------------------------------------------------------------+
+| Clock / Power-on-reset DCR's.
++----------------------------------------------------------------------------*/
+#define CPR0_CFGADDR 0x00C
+#define CPR0_CFGDATA 0x00D
+
+#define CPR0_CLKUPD 0x20
+#define CPR0_CLKUPD_BSY_MASK 0x80000000
+#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000
+#define CPR0_CLKUPD_BSY_BUSY 0x80000000
+#define CPR0_CLKUPD_CUI_MASK 0x80000000
+#define CPR0_CLKUPD_CUI_DISABLE 0x00000000
+#define CPR0_CLKUPD_CUI_ENABLE 0x80000000
+#define CPR0_CLKUPD_CUD_MASK 0x40000000
+#define CPR0_CLKUPD_CUD_DISABLE 0x00000000
+#define CPR0_CLKUPD_CUD_ENABLE 0x40000000
+
+#define CPR0_PLLC 0x40
+#define CPR0_PLLC_RST_MASK 0x80000000
+#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
+#define CPR0_PLLC_RST_PLLRESET 0x80000000
+#define CPR0_PLLC_ENG_MASK 0x40000000
+#define CPR0_PLLC_ENG_DISABLE 0x00000000
+#define CPR0_PLLC_ENG_ENABLE 0x40000000
+#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define CPR0_PLLC_SRC_MASK 0x20000000
+#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
+#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
+#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
+#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
+#define CPR0_PLLC_SEL_MASK 0x07000000
+#define CPR0_PLLC_SEL_PLLOUT 0x00000000
+#define CPR0_PLLC_SEL_CPU 0x01000000
+#define CPR0_PLLC_SEL_EBC 0x05000000
+#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
+#define CPR0_PLLC_TUNE_MASK 0x000003FF
+#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define CPR0_PLLD 0x60
+#define CPR0_PLLD_FBDV_MASK 0x1F000000
+#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
+#define CPR0_PLLD_FWDVA_MASK 0x000F0000
+#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
+#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
+#define CPR0_PLLD_FWDVB_MASK 0x00000700
+#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
+#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
+#define CPR0_PLLD_LFBDV_MASK 0x0000003F
+#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+
+#define CPR0_PRIMAD 0x80
+#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
+#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+
+#define CPR0_PRIMBD 0xA0
+#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
+#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+
+#define CPR0_OPBD 0xC0
+#define CPR0_OPBD_OPBDV0_MASK 0x03000000
+#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+
+#define CPR0_PERD 0xE0
+#define CPR0_PERD_PERDV0_MASK 0x03000000
+#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+
+#define CPR0_MALD 0x100
+#define CPR0_MALD_MALDV0_MASK 0x03000000
+#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+
+#define CPR0_ICFG 0x140
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_ICFG_RLI_RESETCPR 0x00000000
+#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
+#define CPR0_ICFG_ICS_MASK 0x00000007
+#define CPR0_ICFG_ICS_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_ICFG_ICS_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+
+/************************/
+/* IIC defines */
+/************************/
+#define IIC0_MMIO_BASE 0xA0000400
+#define IIC1_MMIO_BASE 0xA0000500
+
+#endif /* CONFIG_440SP */
+
/*-----------------------------------------------------------------------------
| DMA
+----------------------------------------------------------------------------*/
#define UIC_GPTCT 0x00000004 /* GPT count timer */
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-#else /* CONFIG_440SP */
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
#define UIC_IIC0 0x20000000 /* IIC */
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-#endif /* CONFIG_440SP */
+#elif !defined(CONFIG_440SPE)
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI inbound message */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
+#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
+#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
+#define UIC_MTE 0x00200000 /* MAL TXEOB */
+#define UIC_MRE 0x00100000 /* MAL RXEOB */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_RSVD0 0x00008000 /* Reserved */
+#define UIC_RSVD1 0x00004000 /* Reserved */
+#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
+#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
+#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
+#define UIC_EIR0 0x00000100 /* External interrupt 0 */
+#define UIC_EIR1 0x00000080 /* External interrupt 1 */
+#define UIC_EIR2 0x00000040 /* External interrupt 2 */
+#define UIC_EIR3 0x00000020 /* External interrupt 3 */
+#define UIC_EIR4 0x00000010 /* External interrupt 4 */
+#define UIC_EIR5 0x00000008 /* External interrupt 5 */
+#define UIC_EIR6 0x00000004 /* External interrupt 6 */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+#endif /* CONFIG_440GX */
/* For compatibility with 405 code */
#define UIC_MAL_TXEOB UIC_MTE
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
#define UIC_ETH1 0x00000002 /* Reserved */
#define UIC_XOR 0x00000001 /* XOR */
-#else /* CONFIG_440SP */
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
+#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
+#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
+#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
+#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
+#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
+#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
+#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
+#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
+#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
+#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
+#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
+#define UIC_PPMI 0x00004000 /* PPM interrupt status */
+#define UIC_EIR7 0x00002000 /* External interrupt 7 */
+#define UIC_EIR8 0x00001000 /* External interrupt 8 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_EIR10 0x00000400 /* External interrupt 10 */
+#define UIC_EIR11 0x00000200 /* External interrupt 11 */
+#define UIC_EIR12 0x00000100 /* External interrupt 12 */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_RSVD2 0x00000040 /* Reserved */
+#define UIC_RSVD3 0x00000020 /* Reserved */
+#define UIC_PAE 0x00000010 /* PCI asynchronous error */
+#define UIC_ETH0 0x00000008 /* Ethernet 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_ETH1 0x00000002 /* Ethernet 1 */
+#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+#elif !defined(CONFIG_440SPE)
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_MTDE 0x40000000 /* MAL TXDE */
#define UIC_MRDE 0x20000000 /* MAL RXDE */
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
-#endif /* CONFIG_440GX */
+#endif /* CONFIG_440_GX */
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller interrupts
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440SPE)
+/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */
+/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */
+#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */
+#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
+ UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller 0 interrupts (UIC0)
++---------------------------------------------------------------------------*/
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI inbound message */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */
+#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */
+#define UIC_EIR15 0x00400000 /* External intp 15 */
+#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */
+#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */
+#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */
+#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */
+#define UIC_EIR14 0x00002000 /* External interrupt 14 */
+#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */
+#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */
+#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
+#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
+#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
+#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
+#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
+#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
+#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
+#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
+#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller 1 interrupts (UIC1)
++---------------------------------------------------------------------------*/
+#define UIC_EIR13 0x80000000 /* externei intp 13 */
+#define UIC_MS 0x40000000 /* MAL SERR */
+#define UIC_MTDE 0x20000000 /* MAL TXDE */
+#define UIC_MRDE 0x10000000 /* MAL RXDE */
+#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_MTE 0x02000000 /* MAL TXEOB */
+#define UIC_MRE 0x01000000 /* MAL RXEOB */
+#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
+#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
+#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */
+#define UIC_L2C 0x00100000 /* L2 cache */
+#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
+#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
+#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
+#define UIC_EIR12 0x00004000 /* External interrupt 12 */
+#define UIC_EIR11 0x00002000 /* External interrupt 11 */
+#define UIC_EIR10 0x00001000 /* External interrupt 10 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_EIR8 0x00000400 /* External interrupt 8 */
+#define UIC_DMAE 0x00000200 /* dma error */
+#define UIC_I2OE 0x00000100 /* i2o error */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */
+#define UIC_EIR7 0x00000020 /* External interrupt 7 */
+#define UIC_EIR6 0x00000010 /* External interrupt 6 */
+#define UIC_ETH0 0x00000008 /* Ethernet 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_ETH1 0x00000002 /* reserved */
+#define UIC_XOR 0x00000001 /* xor */
+
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller 2 interrupts (UIC2)
++---------------------------------------------------------------------------*/
+#define UIC_PEOAL 0x80000000 /* PE0 AL */
+#define UIC_PEOVA 0x40000000 /* PE0 VPD access */
+#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */
+#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */
+#define UIC_PE0TCR 0x08000000 /* PE0 TCR */
+#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */
+#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */
+#define UIC_PE1AL 0x00800000 /* PE1 AL */
+#define UIC_PE1VA 0x00400000 /* PE1 VPD access */
+#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */
+#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */
+#define UIC_PE1TCR 0x00080000 /* PE1 TCR */
+#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */
+#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */
+#define UIC_PE2AL 0x00008000 /* PE2 AL */
+#define UIC_PE2VA 0x00004000 /* PE2 VPD access */
+#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */
+#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */
+#define UIC_PE2TCR 0x00000800 /* PE2 TCR */
+#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */
+#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */
+#define UIC_EIR5 0x00000080 /* External interrupt 5 */
+#define UIC_EIR4 0x00000040 /* External interrupt 4 */
+#define UIC_EIR3 0x00000020 /* External interrupt 3 */
+#define UIC_EIR2 0x00000010 /* External interrupt 2 */
+#define UIC_EIR1 0x00000008 /* External interrupt 1 */
+#define UIC_EIR0 0x00000004 /* External interrupt 0 */
+#endif /* CONFIG_440SPE */
/*-----------------------------------------------------------------------------+
| External Bus Controller Bit Settings
/*-----------------------------------------------------------------------------+
| SDR0 Bit Settings
+-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440SPE)
+#define SDR0_CP440 0x0180
+#define SDR0_CP440_ERPN_MASK 0x30000000
+#define SDR0_CP440_ERPN_MASK_HI 0x3000
+#define SDR0_CP440_ERPN_MASK_LO 0x0000
+#define SDR0_CP440_ERPN_EBC 0x10000000
+#define SDR0_CP440_ERPN_EBC_HI 0x1000
+#define SDR0_CP440_ERPN_EBC_LO 0x0000
+#define SDR0_CP440_ERPN_PCI 0x20000000
+#define SDR0_CP440_ERPN_PCI_HI 0x2000
+#define SDR0_CP440_ERPN_PCI_LO 0x0000
+#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
+#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
+#define SDR0_CP440_NTO1_MASK 0x00000002
+#define SDR0_CP440_NTO1_NTOP 0x00000000
+#define SDR0_CP440_NTO1_NTO1 0x00000002
+#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
+#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
+#define SDR0_CFGADDR 0x00E /*already defined line 277 */
+#define SDR0_CFGDATA 0x00F
+
+
+#define SDR0_SDSTP0 0x0020
+#define SDR0_SDSTP0_ENG_MASK 0x80000000
+#define SDR0_SDSTP0_ENG_PLLDIS 0x00000000
+#define SDR0_SDSTP0_ENG_PLLENAB 0x80000000
+#define SDR0_SDSTP0_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
+#define SDR0_SDSTP0_ENG_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
+#define SDR0_SDSTP0_SRC_MASK 0x40000000
+#define SDR0_SDSTP0_SRC_PLLOUTA 0x00000000
+#define SDR0_SDSTP0_SRC_PLLOUTB 0x40000000
+#define SDR0_SDSTP0_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define SDR0_SDSTP0_SRC_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define SDR0_SDSTP0_SEL_MASK 0x38000000
+#define SDR0_SDSTP0_SEL_PLLOUT 0x00000000
+#define SDR0_SDSTP0_SEL_CPU 0x08000000
+#define SDR0_SDSTP0_SEL_EBC 0x28000000
+#define SDR0_SDSTP0_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<27)
+#define SDR0_SDSTP0_SEL_DECODE(n) ((((unsigned long)(n))>>27)&0x07)
+#define SDR0_SDSTP0_TUNE_MASK 0x07FE0000
+#define SDR0_SDSTP0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<17)
+#define SDR0_SDSTP0_TUNE_DECODE(n) ((((unsigned long)(n))>>17)&0x3FF)
+#define SDR0_SDSTP0_FBDV_MASK 0x0001F000
+#define SDR0_SDSTP0_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
+#define SDR0_SDSTP0_FBDV_DECODE(n) ((((((unsigned long)(n))>>12)-1)&0x1F)+1)
+#define SDR0_SDSTP0_FWDVA_MASK 0x00000F00
+#define SDR0_SDSTP0_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<8)
+#define SDR0_SDSTP0_FWDVA_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x0F)+1)
+#define SDR0_SDSTP0_FWDVB_MASK 0x000000E0
+#define SDR0_SDSTP0_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<5)
+#define SDR0_SDSTP0_FWDVB_DECODE(n) ((((((unsigned long)(n))>>5)-1)&0x07)+1)
+#define SDR0_SDSTP0_PRBDV0_MASK 0x0000001C
+#define SDR0_SDSTP0_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<2)
+#define SDR0_SDSTP0_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>2)-1)&0x07)+1)
+#define SDR0_SDSTP0_OPBDV0_MASK 0x00000003
+#define SDR0_SDSTP0_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<0)
+#define SDR0_SDSTP0_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x03)+1)
+
+
+#define SDR0_SDSTP1 0x0021
+#define SDR0_SDSTP1_LFBDV_MASK 0xFC000000
+#define SDR0_SDSTP1_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<26)
+#define SDR0_SDSTP1_LFBDV_DECODE(n) ((((unsigned long)(n))>>26)&0x3F)
+#define SDR0_SDSTP1_PERDV0_MASK 0x03000000
+#define SDR0_SDSTP1_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define SDR0_SDSTP1_PERDV0_DECODE(n) ((((unsigned long)(n))>>24)&0x03)
+#define SDR0_SDSTP1_MALDV0_MASK 0x00C00000
+#define SDR0_SDSTP1_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<22)
+#define SDR0_SDSTP1_MALDV0_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
+#define SDR0_SDSTP1_DDR_MODE_MASK 0x00300000
+#define SDR0_SDSTP1_DDR1_MODE 0x00100000
+#define SDR0_SDSTP1_DDR2_MODE 0x00200000
+#define SDR0_SDSTP1_DDR_ENCODE(n) ((((unsigned long)(n))&0x03)<<20)
+#define SDR0_SDSTP1_DDR_DECODE(n) ((((unsigned long)(n))>>20)&0x03)
+#define SDR0_SDSTP1_ERPN_MASK 0x00080000
+#define SDR0_SDSTP1_ERPN_EBC 0x00000000
+#define SDR0_SDSTP1_ERPN_PCI 0x00080000
+#define SDR0_SDSTP1_PAE_MASK 0x00040000
+#define SDR0_SDSTP1_PAE_DISABLE 0x00000000
+#define SDR0_SDSTP1_PAE_ENABLE 0x00040000
+#define SDR0_SDSTP1_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
+#define SDR0_SDSTP1_PAE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
+#define SDR0_SDSTP1_PHCE_MASK 0x00020000
+#define SDR0_SDSTP1_PHCE_DISABLE 0x00000000
+#define SDR0_SDSTP1_PHCE_ENABLE 0x00020000
+#define SDR0_SDSTP1_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
+#define SDR0_SDSTP1_PHCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
+#define SDR0_SDSTP1_PISE_MASK 0x00010000
+#define SDR0_SDSTP1_PISE_DISABLE 0x00000000
+#define SDR0_SDSTP1_PISE_ENABLE 0x00001000
+#define SDR0_SDSTP1_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
+#define SDR0_SDSTP1_PISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
+#define SDR0_SDSTP1_PCWE_MASK 0x00008000
+#define SDR0_SDSTP1_PCWE_DISABLE 0x00000000
+#define SDR0_SDSTP1_PCWE_ENABLE 0x00008000
+#define SDR0_SDSTP1_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
+#define SDR0_SDSTP1_PCWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
+#define SDR0_SDSTP1_PPIM_MASK 0x00007800
+#define SDR0_SDSTP1_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
+#define SDR0_SDSTP1_PPIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
+#define SDR0_SDSTP1_PR64E_MASK 0x00000400
+#define SDR0_SDSTP1_PR64E_DISABLE 0x00000000
+#define SDR0_SDSTP1_PR64E_ENABLE 0x00000400
+#define SDR0_SDSTP1_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<10)
+#define SDR0_SDSTP1_PR64E_DECODE(n) ((((unsigned long)(n))>>10)&0x01)
+#define SDR0_SDSTP1_PXFS_MASK 0x00000300
+#define SDR0_SDSTP1_PXFS_100_133 0x00000000
+#define SDR0_SDSTP1_PXFS_66_100 0x00000100
+#define SDR0_SDSTP1_PXFS_50_66 0x00000200
+#define SDR0_SDSTP1_PXFS_0_50 0x00000300
+#define SDR0_SDSTP1_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define SDR0_SDSTP1_PXFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+#define SDR0_SDSTP1_EBCW_MASK 0x00000080 /* SOP */
+#define SDR0_SDSTP1_EBCW_8_BITS 0x00000000 /* SOP */
+#define SDR0_SDSTP1_EBCW_16_BITS 0x00000080 /* SOP */
+#define SDR0_SDSTP1_DBGEN_MASK 0x00000030 /* $218C */
+#define SDR0_SDSTP1_DBGEN_FUNC 0x00000000
+#define SDR0_SDSTP1_DBGEN_TRACE 0x00000010
+#define SDR0_SDSTP1_DBGEN_ENCODE(n) ((((unsigned long)(n))&0x03)<<4) /* $218C */
+#define SDR0_SDSTP1_DBGEN_DECODE(n) ((((unsigned long)(n))>>4)&0x03) /* $218C */
+#define SDR0_SDSTP1_ETH_MASK 0x00000004
+#define SDR0_SDSTP1_ETH_10_100 0x00000000
+#define SDR0_SDSTP1_ETH_GIGA 0x00000004
+#define SDR0_SDSTP1_ETH_ENCODE(n) ((((unsigned long)(n))&0x01)<<2)
+#define SDR0_SDSTP1_ETH_DECODE(n) ((((unsigned long)(n))>>2)&0x01)
+#define SDR0_SDSTP1_NTO1_MASK 0x00000001
+#define SDR0_SDSTP1_NTO1_DISABLE 0x00000000
+#define SDR0_SDSTP1_NTO1_ENABLE 0x00000001
+#define SDR0_SDSTP1_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<0)
+#define SDR0_SDSTP1_NTO1_DECODE(n) ((((unsigned long)(n))>>0)&0x01)
+
+#define SDR0_SDSTP2 0x0022
+#define SDR0_SDSTP2_P1AE_MASK 0x80000000
+#define SDR0_SDSTP2_P1AE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P1AE_ENABLE 0x80000000
+#define SDR0_SDSTP2_P1AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
+#define SDR0_SDSTP2_P1AE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
+#define SDR0_SDSTP2_P1HCE_MASK 0x40000000
+#define SDR0_SDSTP2_P1HCE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P1HCE_ENABLE 0x40000000
+#define SDR0_SDSTP2_P1HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define SDR0_SDSTP2_P1HCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define SDR0_SDSTP2_P1ISE_MASK 0x20000000
+#define SDR0_SDSTP2_P1ISE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P1ISE_ENABLE 0x20000000
+#define SDR0_SDSTP2_P1ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
+#define SDR0_SDSTP2_P1ISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
+#define SDR0_SDSTP2_P1CWE_MASK 0x10000000
+#define SDR0_SDSTP2_P1CWE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P1CWE_ENABLE 0x10000000
+#define SDR0_SDSTP2_P1CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
+#define SDR0_SDSTP2_P1CWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
+#define SDR0_SDSTP2_P1PIM_MASK 0x0F000000
+#define SDR0_SDSTP2_P1PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
+#define SDR0_SDSTP2_P1PIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+#define SDR0_SDSTP2_P1R64E_MASK 0x00800000
+#define SDR0_SDSTP2_P1R64E_DISABLE 0x00000000
+#define SDR0_SDSTP2_P1R64E_ENABLE 0x00800000
+#define SDR0_SDSTP2_P1R64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
+#define SDR0_SDSTP2_P1R64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
+#define SDR0_SDSTP2_P1XFS_MASK 0x00600000
+#define SDR0_SDSTP2_P1XFS_100_133 0x00000000
+#define SDR0_SDSTP2_P1XFS_66_100 0x00200000
+#define SDR0_SDSTP2_P1XFS_50_66 0x00400000
+#define SDR0_SDSTP2_P1XFS_0_50 0x00600000
+#define SDR0_SDSTP2_P1XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
+#define SDR0_SDSTP2_P1XFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
+#define SDR0_SDSTP2_P2AE_MASK 0x00040000
+#define SDR0_SDSTP2_P2AE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P2AE_ENABLE 0x00040000
+#define SDR0_SDSTP2_P2AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
+#define SDR0_SDSTP2_P2AE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
+#define SDR0_SDSTP2_P2HCE_MASK 0x00020000
+#define SDR0_SDSTP2_P2HCE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P2HCE_ENABLE 0x00020000
+#define SDR0_SDSTP2_P2HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
+#define SDR0_SDSTP2_P2HCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
+#define SDR0_SDSTP2_P2ISE_MASK 0x00010000
+#define SDR0_SDSTP2_P2ISE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P2ISE_ENABLE 0x00010000
+#define SDR0_SDSTP2_P2ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
+#define SDR0_SDSTP2_P2ISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
+#define SDR0_SDSTP2_P2CWE_MASK 0x00008000
+#define SDR0_SDSTP2_P2CWE_DISABLE 0x00000000
+#define SDR0_SDSTP2_P2CWE_ENABLE 0x00008000
+#define SDR0_SDSTP2_P2CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
+#define SDR0_SDSTP2_P2CWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
+#define SDR0_SDSTP2_P2PIM_MASK 0x00007800
+#define SDR0_SDSTP2_P2PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
+#define SDR0_SDSTP2_P2PIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
+#define SDR0_SDSTP2_P2XFS_MASK 0x00000300
+#define SDR0_SDSTP2_P2XFS_100_133 0x00000000
+#define SDR0_SDSTP2_P2XFS_66_100 0x00000100
+#define SDR0_SDSTP2_P2XFS_50_66 0x00000200
+#define SDR0_SDSTP2_P2XFS_0_50 0x00000100
+#define SDR0_SDSTP2_P2XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define SDR0_SDSTP2_P2XFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+
+#define SDR0_SDSTP3 0x0023
+
+#define SDR0_PINSTP 0x0040
+#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */
+#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 (EBC boot) */
+#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1 (PCI boot) */
+#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled - Addr = 0x54 */
+#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled - Addr = 0x50 */
+#define SDR0_SDCS 0x0060
+#define SDR0_ECID0 0x0080
+#define SDR0_ECID1 0x0081
+#define SDR0_ECID2 0x0082
+#define SDR0_JTAG 0x00C0
+
+#define SDR0_DDR0 0x00E1
+#define SDR0_DDR0_DPLLRST 0x80000000
+#define SDR0_DDR0_DDRM_MASK 0x60000000
+#define SDR0_DDR0_DDRM_DDR1 0x20000000
+#define SDR0_DDR0_DDRM_DDR2 0x40000000
+#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
+#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
+#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
+#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
+
+#define SDR0_UART0 0x0120
+#define SDR0_UART1 0x0121
+#define SDR0_UART2 0x0122
+#define SDR0_UARTX_UXICS_MASK 0xF0000000
+#define SDR0_UARTX_UXICS_PLB 0x20000000
+#define SDR0_UARTX_UXEC_MASK 0x00800000
+#define SDR0_UARTX_UXEC_INT 0x00000000
+#define SDR0_UARTX_UXEC_EXT 0x00800000
+#define SDR0_UARTX_UXDIV_MASK 0x000000FF
+#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1)
+
+#define SDR0_CP440 0x0180
+#define SDR0_CP440_ERPN_MASK 0x30000000
+#define SDR0_CP440_ERPN_MASK_HI 0x3000
+#define SDR0_CP440_ERPN_MASK_LO 0x0000
+#define SDR0_CP440_ERPN_EBC 0x10000000
+#define SDR0_CP440_ERPN_EBC_HI 0x1000
+#define SDR0_CP440_ERPN_EBC_LO 0x0000
+#define SDR0_CP440_ERPN_PCI 0x20000000
+#define SDR0_CP440_ERPN_PCI_HI 0x2000
+#define SDR0_CP440_ERPN_PCI_LO 0x0000
+#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
+#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
+#define SDR0_CP440_NTO1_MASK 0x00000002
+#define SDR0_CP440_NTO1_NTOP 0x00000000
+#define SDR0_CP440_NTO1_NTO1 0x00000002
+#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
+#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
+
+#define SDR0_XCR0 0x01C0
+#define SDR0_XCR1 0x01C3
+#define SDR0_XCR2 0x01C6
+#define SDR0_XCRn_PAE_MASK 0x80000000
+#define SDR0_XCRn_PAE_DISABLE 0x00000000
+#define SDR0_XCRn_PAE_ENABLE 0x80000000
+#define SDR0_XCRn_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
+#define SDR0_XCRn_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
+#define SDR0_XCRn_PHCE_MASK 0x40000000
+#define SDR0_XCRn_PHCE_DISABLE 0x00000000
+#define SDR0_XCRn_PHCE_ENABLE 0x40000000
+#define SDR0_XCRn_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define SDR0_XCRn_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define SDR0_XCRn_PISE_MASK 0x20000000
+#define SDR0_XCRn_PISE_DISABLE 0x00000000
+#define SDR0_XCRn_PISE_ENABLE 0x20000000
+#define SDR0_XCRn_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
+#define SDR0_XCRn_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
+#define SDR0_XCRn_PCWE_MASK 0x10000000
+#define SDR0_XCRn_PCWE_DISABLE 0x00000000
+#define SDR0_XCRn_PCWE_ENABLE 0x10000000
+#define SDR0_XCRn_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
+#define SDR0_XCRn_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
+#define SDR0_XCRn_PPIM_MASK 0x0F000000
+#define SDR0_XCRn_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
+#define SDR0_XCRn_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+#define SDR0_XCRn_PR64E_MASK 0x00800000
+#define SDR0_XCRn_PR64E_DISABLE 0x00000000
+#define SDR0_XCRn_PR64E_ENABLE 0x00800000
+#define SDR0_XCRn_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
+#define SDR0_XCRn_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
+#define SDR0_XCRn_PXFS_MASK 0x00600000
+#define SDR0_XCRn_PXFS_100_133 0x00000000
+#define SDR0_XCRn_PXFS_66_100 0x00200000
+#define SDR0_XCRn_PXFS_50_66 0x00400000
+#define SDR0_XCRn_PXFS_0_33 0x00600000
+#define SDR0_XCRn_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
+#define SDR0_XCRn_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
+
+#define SDR0_XPLLC0 0x01C1
+#define SDR0_XPLLD0 0x01C2
+#define SDR0_XPLLC1 0x01C4
+#define SDR0_XPLLD1 0x01C5
+#define SDR0_XPLLC2 0x01C7
+#define SDR0_XPLLD2 0x01C8
+#define SDR0_SRST 0x0200
+#define SDR0_SLPIPE 0x0220
+
+#define SDR0_AMP0 0x0240
+#define SDR0_AMP0_PRIORITY 0xFFFF0000
+#define SDR0_AMP0_ALTERNATE_PRIORITY 0x0000FF00
+#define SDR0_AMP0_RESERVED_BITS_MASK 0x000000FF
+
+#define SDR0_AMP1 0x0241
+#define SDR0_AMP1_PRIORITY 0xFC000000
+#define SDR0_AMP1_ALTERNATE_PRIORITY 0x0000E000
+#define SDR0_AMP1_RESERVED_BITS_MASK 0x03FF1FFF
+
+#define SDR0_MIRQ0 0x0260
+#define SDR0_MIRQ1 0x0261
+#define SDR0_MALTBL 0x0280
+#define SDR0_MALRBL 0x02A0
+#define SDR0_MALTBS 0x02C0
+#define SDR0_MALRBS 0x02E0
+
+/* Reserved for Customer Use */
+#define SDR0_CUST0 0x4000
+#define SDR0_CUST0_AUTONEG_MASK 0x8000000
+#define SDR0_CUST0_NO_AUTONEG 0x0000000
+#define SDR0_CUST0_AUTONEG 0x8000000
+#define SDR0_CUST0_ETH_FORCE_MASK 0x6000000
+#define SDR0_CUST0_ETH_FORCE_10MHZ 0x0000000
+#define SDR0_CUST0_ETH_FORCE_100MHZ 0x2000000
+#define SDR0_CUST0_ETH_FORCE_1000MHZ 0x4000000
+#define SDR0_CUST0_ETH_DUPLEX_MASK 0x1000000
+#define SDR0_CUST0_ETH_HALF_DUPLEX 0x0000000
+#define SDR0_CUST0_ETH_FULL_DUPLEX 0x1000000
+
+#define SDR0_SDSTP4 0x4001
+#define SDR0_CUST1 0x4002
+#define SDR0_SDSTP5 0x4003
+#define SDR0_CUST2 0x4004
+#define SDR0_SDSTP6 0x4005
+#define SDR0_CUST3 0x4006
+#define SDR0_SDSTP7 0x4007
+
+#define SDR0_PFC0 0x4100
+#define SDR0_PFC0_GPIO_0 0x80000000
+#define SDR0_PFC0_PCIX0REQ2_N 0x00000000
+#define SDR0_PFC0_GPIO_1 0x40000000
+#define SDR0_PFC0_PCIX0REQ3_N 0x00000000
+#define SDR0_PFC0_GPIO_2 0x20000000
+#define SDR0_PFC0_PCIX0GNT2_N 0x00000000
+#define SDR0_PFC0_GPIO_3 0x10000000
+#define SDR0_PFC0_PCIX0GNT3_N 0x00000000
+#define SDR0_PFC0_GPIO_4 0x08000000
+#define SDR0_PFC0_PCIX1REQ2_N 0x00000000
+#define SDR0_PFC0_GPIO_5 0x04000000
+#define SDR0_PFC0_PCIX1REQ3_N 0x00000000
+#define SDR0_PFC0_GPIO_6 0x02000000
+#define SDR0_PFC0_PCIX1GNT2_N 0x00000000
+#define SDR0_PFC0_GPIO_7 0x01000000
+#define SDR0_PFC0_PCIX1GNT3_N 0x00000000
+#define SDR0_PFC0_GPIO_8 0x00800000
+#define SDR0_PFC0_PERREADY 0x00000000
+#define SDR0_PFC0_GPIO_9 0x00400000
+#define SDR0_PFC0_PERCS1_N 0x00000000
+#define SDR0_PFC0_GPIO_10 0x00200000
+#define SDR0_PFC0_PERCS2_N 0x00000000
+#define SDR0_PFC0_GPIO_11 0x00100000
+#define SDR0_PFC0_IRQ0 0x00000000
+#define SDR0_PFC0_GPIO_12 0x00080000
+#define SDR0_PFC0_IRQ1 0x00000000
+#define SDR0_PFC0_GPIO_13 0x00040000
+#define SDR0_PFC0_IRQ2 0x00000000
+#define SDR0_PFC0_GPIO_14 0x00020000
+#define SDR0_PFC0_IRQ3 0x00000000
+#define SDR0_PFC0_GPIO_15 0x00010000
+#define SDR0_PFC0_IRQ4 0x00000000
+#define SDR0_PFC0_GPIO_16 0x00008000
+#define SDR0_PFC0_IRQ5 0x00000000
+#define SDR0_PFC0_GPIO_17 0x00004000
+#define SDR0_PFC0_PERBE0_N 0x00000000
+#define SDR0_PFC0_GPIO_18 0x00002000
+#define SDR0_PFC0_PCI0GNT0_N 0x00000000
+#define SDR0_PFC0_GPIO_19 0x00001000
+#define SDR0_PFC0_PCI0GNT1_N 0x00000000
+#define SDR0_PFC0_GPIO_20 0x00000800
+#define SDR0_PFC0_PCI0REQ0_N 0x00000000
+#define SDR0_PFC0_GPIO_21 0x00000400
+#define SDR0_PFC0_PCI0REQ1_N 0x00000000
+#define SDR0_PFC0_GPIO_22 0x00000200
+#define SDR0_PFC0_PCI1GNT0_N 0x00000000
+#define SDR0_PFC0_GPIO_23 0x00000100
+#define SDR0_PFC0_PCI1GNT1_N 0x00000000
+#define SDR0_PFC0_GPIO_24 0x00000080
+#define SDR0_PFC0_PCI1REQ0_N 0x00000000
+#define SDR0_PFC0_GPIO_25 0x00000040
+#define SDR0_PFC0_PCI1REQ1_N 0x00000000
+#define SDR0_PFC0_GPIO_26 0x00000020
+#define SDR0_PFC0_PCI2GNT0_N 0x00000000
+#define SDR0_PFC0_GPIO_27 0x00000010
+#define SDR0_PFC0_PCI2GNT1_N 0x00000000
+#define SDR0_PFC0_GPIO_28 0x00000008
+#define SDR0_PFC0_PCI2REQ0_N 0x00000000
+#define SDR0_PFC0_GPIO_29 0x00000004
+#define SDR0_PFC0_PCI2REQ1_N 0x00000000
+#define SDR0_PFC0_GPIO_30 0x00000002
+#define SDR0_PFC0_UART1RX 0x00000000
+#define SDR0_PFC0_GPIO_31 0x00000001
+#define SDR0_PFC0_UART1TX 0x00000000
+
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC1_UART1_CTS_RTS_MASK 0x02000000
+#define SDR0_PFC1_UART1_DSR_DTR 0x00000000
+#define SDR0_PFC1_UART1_CTS_RTS 0x02000000
+#define SDR0_PFC1_UART2_IN_SERVICE_MASK 0x01000000
+#define SDR0_PFC1_UART2_NOT_IN_SERVICE 0x00000000
+#define SDR0_PFC1_UART2_IN_SERVICE 0x01000000
+#define SDR0_PFC1_ETH_GIGA_MASK 0x00200000
+#define SDR0_PFC1_ETH_10_100 0x00000000
+#define SDR0_PFC1_ETH_GIGA 0x00200000
+#define SDR0_PFC1_ETH_GIGA_ENCODE(n) ((((unsigned long)(n))&0x1)<<21)
+#define SDR0_PFC1_ETH_GIGA_DECODE(n) ((((unsigned long)(n))>>21)&0x01)
+#define SDR0_PFC1_CPU_TRACE_MASK 0x00180000 /* $218C */
+#define SDR0_PFC1_CPU_NO_TRACE 0x00000000
+#define SDR0_PFC1_CPU_TRACE 0x00080000
+#define SDR0_PFC1_CPU_TRACE_ENCODE(n) ((((unsigned long)(n))&0x3)<<19) /* $218C */
+#define SDR0_PFC1_CPU_TRACE_DECODE(n) ((((unsigned long)(n))>>19)&0x03) /* $218C */
+
+#define SDR0_MFR 0x4300
+#endif /* CONFIG_440SPE */
+
+
#define SDR0_SDCS_SDD (0x80000000 >> 31)
#if defined(CONFIG_440GP)
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP)
+#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
unsigned long freqOPB;
unsigned long freqEPB;
unsigned long freqPCI;
+#ifdef CONFIG_440SPE
+ unsigned long freqDDR;
+#endif
unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
unsigned long pciClkSync; /* PCI clock is synchronous */
} PPC440_SYS_INFO;
#define EMAC_NUM_DEV 4
#elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \
defined(CONFIG_NET_MULTI) && \
- !defined(CONFIG_440SP)
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
#define EMAC_NUM_DEV 2
#else
#define EMAC_NUM_DEV 1
#endif
+#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */
+#define EMAC_STACR_OC_MASK (0x00008000)
+#else
+#define EMAC_STACR_OC_MASK (0x00000000)
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PFC1_EM_1000 (0x00200000)
+#endif
/*ZMII Bridge Register addresses */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
/* STA CONTROL REG */
#define EMAC_STACR_OC (0x00008000)
#define EMAC_STACR_PHYE (0x00004000)
+
+#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */
+#define EMAC_STACR_INDIRECT_MODE (0x00002000)
+#define EMAC_STACR_WRITE (0x00000800) /* $BUC */
+#define EMAC_STACR_READ (0x00001000) /* $BUC */
+#define EMAC_STACR_OP_MASK (0x00001800)
+#define EMAC_STACR_MDIO_ADDR (0x00000000)
+#define EMAC_STACR_MDIO_WRITE (0x00000800)
+#define EMAC_STACR_MDIO_READ (0x00001800)
+#define EMAC_STACR_MDIO_READ_INC (0x00001000)
+#else
#define EMAC_STACR_WRITE (0x00002000)
#define EMAC_STACR_READ (0x00001000)
+#endif
+
#define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */
#define EMAC_STACR_CLK_66MHZ (0x00000400)
#define EMAC_STACR_CLK_100MHZ (0x00000C00)
bd = gd->bd;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+ gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
board_early_init_r ();
#endif
- gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
-
monitor_flash_len = (ulong)&__init_end - dest_addr;
-#ifdef CONFIG_SERIAL_MULTI
- serial_initialize();
-#endif
-
/*
* We have to relocate the command table manually
*/
projects / platform / kernel / u-boot.git / commitdiff