riscv: cpu: jh7110: Add support for jh7110 SoC

Add StarFive JH7110 SoC to support RISC-V arch.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
(cherry picked from commit 218534153ec8932a873dcca48a1a2b4aba0e32b5)

Change-Id: Id2377db738c5f419c81564089435a7b3b24519b8
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/arch/riscv/cpu/jh7110/Makefile b/arch/riscv/cpu/jh7110/Makefile
new file mode 100644 (file)
index 0000000..951c956
--- /dev/null
+++ b/arch/riscv/cpu/jh7110/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2022 StarFive Technology Co., Ltd.
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-y += spl.o
+else
+obj-y += cpu.o
+obj-y += dram.o
+endif

diff --git a/arch/riscv/cpu/jh7110/cpu.c b/arch/riscv/cpu/jh7110/cpu.c
new file mode 100644 (file)
index 0000000..1d7c026
--- /dev/null
+++ b/arch/riscv/cpu/jh7110/cpu.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Author: Yanhong Wang <yanhong.wang@starfivetech.com>
+ */
+
+#include <asm/cache.h>
+#include <irq_func.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+       disable_interrupts();
+
+       cache_flush();
+
+       return 0;
+}

diff --git a/arch/riscv/cpu/jh7110/dram.c b/arch/riscv/cpu/jh7110/dram.c
new file mode 100644 (file)
index 0000000..2ad3f20
--- /dev/null
+++ b/arch/riscv/cpu/jh7110/dram.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Author: Yanhong Wang <yanhong.wang@starfivetech.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+       return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+       return fdtdec_setup_memory_banksize();
+}
+
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
+{
+       /*
+        * Ensure that we run from first 4GB so that all
+        * addresses used by U-Boot are 32bit addresses.
+        *
+        * This in-turn ensures that 32bit DMA capable
+        * devices work fine because DMA mapping APIs will
+        * provide 32bit DMA addresses only.
+        */
+       if (IS_ENABLED(CONFIG_64BIT) && gd->ram_top > SZ_4G)
+               return SZ_4G;
+
+       return gd->ram_top;
+}

diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c
new file mode 100644 (file)
index 0000000..104f0fe
--- /dev/null
+++ b/arch/riscv/cpu/jh7110/spl.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Author: Yanhong Wang<yanhong.wang@starfivetech.com>
+ */
+
+#include <asm/csr.h>
+#include <asm/sections.h>
+#include <dm.h>
+#include <log.h>
+
+#define CSR_U74_FEATURE_DISABLE        0x7c1
+#define L2_LIM_MEM_END 0x81FFFFFUL
+
+int spl_soc_init(void)
+{
+       int ret;
+       struct udevice *dev;
+
+       /* DDR init */
+       ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+       if (ret) {
+               debug("DRAM init failed: %d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+void harts_early_init(void)
+{
+       ulong *ptr;
+       u8 *tmp;
+       ulong len, remain;
+       /*
+        * Feature Disable CSR
+        *
+        * Clear feature disable CSR to '0' to turn on all features for
+        * each core. This operation must be in M-mode.
+        */
+       if (CONFIG_IS_ENABLED(RISCV_MMODE))
+               csr_write(CSR_U74_FEATURE_DISABLE, 0);
+
+       /* clear L2 LIM  memory
+        * set __bss_end to 0x81FFFFF region to zero
+        * The L2 Cache Controller supports ECC. ECC is applied to SRAM.
+        * If it is not cleared, the ECC part is invalid, and an ECC error
+        * will be reported when reading data.
+        */
+       ptr = (ulong *)&__bss_end;
+       len = L2_LIM_MEM_END - (ulong)&__bss_end;
+       remain = len % sizeof(ulong);
+       len /= sizeof(ulong);
+
+       while (len--)
+               *ptr++ = 0;
+
+       /* clear the remain bytes */
+       if (remain) {
+               tmp = (u8 *)ptr;
+               while (remain--)
+                       *tmp++ = 0;
+       }
+}

diff --git a/arch/riscv/include/asm/arch-jh7110/regs.h b/arch/riscv/include/asm/arch-jh7110/regs.h
new file mode 100644 (file)
index 0000000..0502687
--- /dev/null
+++ b/arch/riscv/include/asm/arch-jh7110/regs.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Author: Yanhong Wang <yanhong.wang@starfivetech.com>
+ */
+
+#ifndef __STARFIVE_JH7110_REGS_H
+#define __STARFIVE_JH7110_REGS_H
+
+#define JH7110_SYS_CRG                 0x13020000
+#define JH7110_SYS_SYSCON              0x13030000
+#define JH7110_SYS_IOMUX               0x13040000
+#define JH7110_AON_CRG                 0x17000000
+#define JH7110_AON_SYSCON              0x17010000
+
+#define JH7110_BOOT_MODE_SELECT_REG    0x1702002c
+#define JH7110_BOOT_MODE_SELECT_MASK   GENMASK(1, 0)
+
+#endif /* __STARFIVE_JH7110_REGS_H */

diff --git a/arch/riscv/include/asm/arch-jh7110/spl.h b/arch/riscv/include/asm/arch-jh7110/spl.h
new file mode 100644 (file)
index 0000000..23ce887
--- /dev/null
+++ b/arch/riscv/include/asm/arch-jh7110/spl.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Author: Yanhong Wang <yanhong.wang@starfivetech.com>
+ */
+
+#ifndef _SPL_STARFIVE_H
+#define _SPL_STARFIVE_H
+
+int spl_soc_init(void);
+
+#endif /* _SPL_STARFIVE_H */