crash. This is needed for buggy hardware (uc101) where
no pull down resistor is connected to the signal IDE5V_DD7.
- CONFIG_MACH_TYPE [relevant for ARM only][mandatory]
-
- This setting is mandatory for all boards that have only one
- machine type and must be used to specify the machine type
- number as it appears in the ARM machine registry
- (see https://www.arm.linux.org.uk/developer/machines/).
- Only boards that have multiple machine types supported
- in a single configuration file and the machine type is
- runtime discoverable, do not have to use this setting.
-
- vxWorks boot parameters:
bootvx constructs a valid bootline using the following
int board_init(void)
{
+#ifdef CONFIG_MACH_TYPE
/* Machine number */
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+#endif
/* Boot parameters address */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
static unsigned int syno_board_id(void)
{
+#ifdef CONFIG_MACH_TYPE
switch (CONFIG_MACH_TYPE) {
case 527:
return SYNO_DS109_ID;
case 3036:
return SYNO_AXP_4BAY_2BAY;
- default:
- return 0;
}
+#endif
+ return 0;
}
static unsigned int usb_port_modes(void)
#include <asm/gpio.h>
/* TODO: Remove this code when the SPI switch is working */
-#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+#ifndef CONFIG_TARGET_VENTANA
void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
else
tdx_hw_tag.prodid = COLIBRI_PXA270_520MHZ;
}
-#ifdef CONFIG_MACH_TYPE
+#if defined(CONFIG_TARGET_APALIS_T30) || defined(CONFIG_TARGET_COLIBRI_T30)
else if (!strcmp("tegra30", soc)) {
- if (CONFIG_MACH_TYPE == MACH_TYPE_APALIS_T30) {
- if (it == 'y' || it == 'Y')
- tdx_hw_tag.prodid = APALIS_T30_IT;
- else
- if (gd->ram_size == 0x40000000)
- tdx_hw_tag.prodid = APALIS_T30_1GB;
- else
- tdx_hw_tag.prodid = APALIS_T30_2GB;
- } else {
- if (it == 'y' || it == 'Y')
- tdx_hw_tag.prodid = COLIBRI_T30_IT;
+#ifdef CONFIG_TARGET_APALIS_T30
+ if (it == 'y' || it == 'Y')
+ tdx_hw_tag.prodid = APALIS_T30_IT;
+ else
+ if (gd->ram_size == 0x40000000)
+ tdx_hw_tag.prodid = APALIS_T30_1GB;
else
- tdx_hw_tag.prodid = COLIBRI_T30;
- }
+ tdx_hw_tag.prodid = APALIS_T30_2GB;
+#else
+ if (it == 'y' || it == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_T30_IT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_T30;
+#endif
}
-#endif /* CONFIG_MACH_TYPE */
+#endif /* CONFIG_TARGET_APALIS_T30 || CONFIG_TARGET_COLIBRI_T30 */
else if (!strcmp("tegra124", soc)) {
tdx_hw_tag.prodid = APALIS_TK1_2GB;
} else if (!strcmp("vf500", soc)) {
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0033"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068"
+CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run flash_self"
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x180000
CONFIG_SYS_LOAD_ADDR=0x70000000
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067"
+CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
#define CONFIG_SYS_BOOTM_LEN SZ_16M
-#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-/*#define CONFIG_MACH_TYPE 3589 Until the next sync */
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#undef CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_MACH_TYPE 4886
-
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_APALIS_T30
-
/* PCI networking support */
#define CONFIG_E1000_NO_NVM
#include "mx6_common.h"
-#define CONFIG_MACH_TYPE 4501
#define CONFIG_MMCROOT "/dev/mmcblk0p1"
/* MMC Configs */
(ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-/*
- * The (arm)linux board id set by generic code depending on configured board
- * (see boards.cfg for different boards)
- */
-#ifdef CONFIG_AT91SAM9G20
- /* the sam9g20 variants have two different board ids */
-# ifdef CONFIG_AT91SAM9G20EK_2MMC
- /* we may be setup for the 2MMC variant of at91sam9g20ek */
-# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
-# else
- /* or the normal at91sam9g20ek */
-# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
-# endif
-#else
- /* otherwise default to good old at91sam9260ek */
-# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
-#endif
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#include <linux/sizes.h>
#include <configs/ti_am335x_common.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_BEAVER
-
/* SPI */
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
#define CONFIG_POWER_TPS65217
-/*#define CONFIG_MACH_TYPE 3589*/
-#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
-
/*
* When we have NAND flash we expect to be making use of mtdparts,
* both for ease of use in U-Boot and for passing information on to
#define CONFIG_FSL_USDHC
/* Boot */
-#define CONFIG_MACH_TYPE 0xFFFFFFFF
/* misc */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#define CONFIG_MACH_TYPE 3589
-
#ifndef CONFIG_SPL_BUILD
/* Default environment */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#define CONFIG_MACH_TYPE 3589
-
#ifndef CONFIG_SPL_BUILD
/* Default environment */
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_CARDHU
-
/* SPI */
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
/* Machine config */
#define CONFIG_SYS_LITTLE_ENDIAN
-#define CONFIG_MACH_TYPE 4273
/* MMC */
#define CONFIG_SYS_FSL_USDHC_NUM 3
#undef CONFIG_MAX_RAM_BANK_SIZE
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 512MB */
-#define CONFIG_MACH_TYPE MACH_TYPE_CM_T335
-
/* Clock Defines */
#define V_OSCK 25000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#define CONFIG_TEGRA_UARTA_SDIO1
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_COLIBRI_TEGRA2
-
/* LCD support */
#define CONFIG_LCD_LOGO
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_COLIBRI_T30
-
/* Increase console I/O buffer size */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_DALMORE
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* SPI */
#include <linux/sizes.h>
#include <asm/arch/cpu.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT3250
-
/*
* Memory configurations
*/
#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000
/*
* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
#define _CONFIG_DNS325_H
/*
- * Machine number definition
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
-
-/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#ifndef __CONFIG_DRACO_H
#define __CONFIG_DRACO_H
-#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO
-
#include "siemens-am33x-common.h"
#define DDR_PLL_FREQ 303
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
-#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
#include "mv-plug-common.h"
#ifndef _CONFIG_DS109_H
#define _CONFIG_DS109_H
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE 527
-
/*
* High Level Configuration Options (easy to change)
*/
#ifndef _CONFIG_SYNOLOGY_DS414_H
#define _CONFIG_SYNOLOGY_DS414_H
-/* Vendor kernel expects this MACH_TYPE */
-#define CONFIG_MACH_TYPE 3036
-
/*
* High Level Configuration Options (easy to change)
*/
/*
* SoC and board defines
*/
-#define CONFIG_MACH_TYPE MACH_TYPE_LPC3XXX
#define CONFIG_BOARD_SIZE_LIMIT 0x000fffff /* maximum allowable size for full U-Boot binary */
/*
/* The first stage boot loader takes care of low level initialization. */
-/* Set our official architecture number. */
-#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
-
/* CPU information */
/* ARM asynchronous clock */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250
-
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_EXYNOS5_DT
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE 8002
-
#define CONFIG_VAR_SIZE_SPL
#define CONFIG_IRAM_TOP 0x02074000
/* High Level Configuration Options */
#define CONFIG_MX35
-#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
-
/* Set TEXT at the beginning of the NOR flash */
/* This is required to setup the ESDC controller */
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
-#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
-
/* Serial */
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_SYS_NS16550_COM2 NV_PA_APB_UARTA_BASE
#endif
-#define CONFIG_MACH_TYPE MACH_TYPE_HARMONY
-
/* NAND support */
#define CONFIG_TEGRA_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-/*
- * Machine type
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT
-
#include "mv-common.h"
/*
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD
-
#define CONFIG_NAND_ECC_BCH
/* include common defines/options for all Keymile boards */
#define __KZM9G_H
#define CONFIG_SH73A0
-#define CONFIG_MACH_TYPE MACH_TYPE_KZM9G
#include <asm/arch/rmobile.h>
#define _CONFIG_LACIE_KW_H
/*
- * Machine number definition
- */
-#if defined(CONFIG_INETSPACE_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2
-#elif defined(CONFIG_NETSPACE_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
-#elif defined(CONFIG_NETSPACE_LITE_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2
-#elif defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2
-#elif defined(CONFIG_NETSPACE_MAX_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
-#elif defined(CONFIG_D2NET_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
-#elif defined(CONFIG_NET2BIG_V2)
-#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
-#else
-#error "Unknown board"
-#endif
-
-/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
*/
#if defined(CONFIG_LSCHLV2)
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
-#define CONFIG_MACH_TYPE 3006
#elif defined(CONFIG_LSXHL)
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
-#define CONFIG_MACH_TYPE 2663
#else
#error "unknown board"
#endif
#ifndef __CONFIGS_MX23_OLINUXINO_H__
#define __CONFIGS_MX23_OLINUXINO_H__
-/* System configurations */
-#define CONFIG_MACH_TYPE 4105
-
/* U-Boot Commands */
/* Memory configuration */
#ifndef __CONFIGS_MX23EVK_H__
#define __CONFIGS_MX23EVK_H__
-/* System configurations */
-#define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK
-
/* U-Boot Commands */
/* Memory configuration */
#ifndef __CONFIGS_MX28EVK_H__
#define __CONFIGS_MX28EVK_H__
-/* System configurations */
-#define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK
-
/* Memory configuration */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
#include <asm/arch/imx-regs.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE
/*
* Hardware drivers
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO
-
#include <asm/arch/imx-regs.h>
#define CONFIG_SYS_FSL_CLK
#include "imx6_spl.h"
#endif
-#define CONFIG_MACH_TYPE 3529
#define CONFIG_MXC_UART_BASE UART4_BASE
#define CONSOLE_DEV "ttymxc3"
#include "imx6_spl.h"
#endif
-#define CONFIG_MACH_TYPE 3980
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONSOLE_DEV "ttymxc0"
#include "imx6_spl.h"
#endif
-#define CONFIG_MACH_TYPE MACH_TYPE_MX6SL_EVK
-
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
/* MMC Configs */
#define _CONFIG_NAS220_H
/*
- * Machine type ID
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS
-
-/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
#include "mx6_common.h"
-#define CONFIG_MACH_TYPE 3769
-
#define CONFIG_USBD_HS
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_SYS_PL310_BASE 0x10502000
#endif
-#define CONFIG_MACH_TYPE 4289
-
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
/*
* High Level Configuration Options
*/
-#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP
#include <configs/ti_omap4_common.h>
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
-
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
#include "tegra-common-post.h"
/* Using 32K of volatile storage for environment */
-#define MACH_TYPE_PDU001 5075
-#define CONFIG_MACH_TYPE MACH_TYPE_PDU001
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#include <configs/ti_am335x_common.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_SBC_PHYCORE_AM335X
-
#ifdef CONFIG_MTD_RAW_NAND
#define NANDARGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
-#define CONFIG_MACH_TYPE MACH_TYPE_PM9261
-
/* clocks */
/* CKGR_MOR - enable main osc. */
#define CONFIG_SYS_MOR_VAL \
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263"
-#define CONFIG_MACH_TYPE MACH_TYPE_PM9263
-
/* clocks */
#define CONFIG_SYS_MOR_VAL \
(AT91_PMC_MOR_MOSCEN | \
#define _CONFIG_POGO_E02_H
/*
- * Machine type definition and ID
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
-
-/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#ifndef __CONFIG_PXM2_H
#define __CONFIG_PXM2_H
-#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
-
#include "siemens-am33x-common.h"
#define DDR_IOCTRL_VAL 0x18b
(&((struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR)->clo)
#endif
-/*
- * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
- * so 2708 has historically been used rather than a dedicated 2835 ID.
- *
- * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
- * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
- * rather than obtaining a valid ID:-/
- *
- * For the bcm2837, hopefully a machine type is not needed, since everything
- * is DT.
- */
-#ifdef CONFIG_BCM2835
-#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
-#endif
-
/* Memory layout */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
#ifndef __CONFIG_RUT_H
#define __CONFIG_RUT_H
-#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_RUT
-
#include "siemens-am33x-common.h"
#define RUT_IOCTRL_VAL 0x18b
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
/* NAND support */
#define CONFIG_DMA_COHERENT
#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
-#ifdef CONFIG_SIEMENS_MACH_TYPE
-#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE
-#endif
-
/* commands to include */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_MAXARGS 32
/* setting board specific options */
-#define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB
#define CONFIG_SYS_AUTOLOAD "yes"
#define CONFIG_RESET_TO_RETRY
/* High Level Configuration Options */
#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
-/* Mach Type */
-#define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310
-
#define CONFIG_SYS_SDRAM_BASE 0x40000000
/* Handling Sleep Mode*/
*/
#include <configs/sunxi-common.h>
-#define CONFIG_MACH_TYPE (4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
-
#endif /* __CONFIG_H */
*/
#include <configs/sunxi-common.h>
-#define CONFIG_MACH_TYPE (4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
-
#endif /* __CONFIG_H */
*/
#include <configs/sunxi-common.h>
-#define CONFIG_MACH_TYPE (4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
-
#endif /* __CONFIG_H */
#include <asm/arch/cpu.h>
#include <linux/stringify.h>
-#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
-/*
- * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
- * expense of restricting some features, so the regular machine id values can
- * be used.
- */
-# define CONFIG_MACH_TYPE_COMPAT_REV 0
-#else
-/*
- * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
- * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
- * beyond the machine id check.
- */
-# define CONFIG_MACH_TYPE_COMPAT_REV 1
-#endif
-
#ifdef CONFIG_ARM64
#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#endif
/* General configuration */
-#define CONFIG_MACH_TYPE 3980
-
#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#include <asm/arch/omap.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM
-
/* commands to include */
#define CONFIG_EXTRA_ENV_SETTINGS \
#include <configs/ti_armv7_omap.h>
#include <asm/arch/omap.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
-
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
-
#define CONFIG_BOOTCOMMAND "run autoboot"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
#define CONFIG_TEGRA_UARTA_GPU
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE
-
/* SPI */
/* Environment in SPI */
#include "imx6_spl.h"
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE 4800
-
#define CONFIG_MXC_UART_BASE UART2_BASE
/* SATA Configs */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
-#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263
-
/*
* Hardware drivers
*/
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
-#define CONFIG_MACH_TYPE MACH_TYPE_VENTANA
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
#include "tegra-common-post.h"
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_MACH_TYPE 4146
-
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#include "imx6_spl.h"
-#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD_IMX6
-
#define CONFIG_MXC_UART_BASE UART1_BASE
/* SATA Configs */
#include <asm/arch/cpu.h>
/*
- * Define work_92105 machine type by hand -- done only for compatibility
- * with original board code
- */
-#define CONFIG_MACH_TYPE 736
-
-/*
* Memory configurations
*/
#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE
#define CONFIG_SYS_TIMER_COUNTER \
(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
-#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25
/*
* Environment settings
*/
projects / platform / kernel / u-boot.git / commitdiff