configs: remove CONFIG_NET_MULTI
authorLars Poeschel <poeschel@lemonage.de>
Tue, 2 Jun 2015 09:25:54 +0000 (11:25 +0200)
committerTom Rini <trini@konsulko.com>
Tue, 2 Jun 2015 15:12:32 +0000 (11:12 -0400)
CONFIG_NET_MULTI is not used anywhere and thus can safely be removed
from the configs.

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
45 files changed:
include/configs/B4860QDS.h
include/configs/C29XPCIE.h
include/configs/M54418TWR.h
include/configs/T208xQDS.h
include/configs/T208xRDB.h
include/configs/T4240RDB.h
include/configs/ac14xx.h
include/configs/adp-ag102.h
include/configs/alt.h
include/configs/am43xx_evm.h
include/configs/apx4devkit.h
include/configs/armadillo-800eva.h
include/configs/atngw100mkii.h
include/configs/axs101.h
include/configs/bf609-ezkit.h
include/configs/bg0900.h
include/configs/edb93xx.h
include/configs/gose.h
include/configs/ids8313.h
include/configs/ima3-mx53.h
include/configs/integratorap.h
include/configs/koelsch.h
include/configs/ks2_evm.h
include/configs/kzm9g.h
include/configs/lager.h
include/configs/ls1021aqds.h
include/configs/ls1021atwr.h
include/configs/ls2085aqds.h
include/configs/ls2085ardb.h
include/configs/mx28evk.h
include/configs/omapl138_lcdk.h
include/configs/p1_twr.h
include/configs/pcm051.h
include/configs/porter.h
include/configs/qemu-ppce500.h
include/configs/sama5d3_xplained.h
include/configs/siemens-am33x-common.h
include/configs/silk.h
include/configs/socfpga_common.h
include/configs/spear-common.h
include/configs/t4qds.h
include/configs/ti814x_evm.h
include/configs/vl_ma2sc.h
include/configs/x600.h
include/configs/zynq-common.h

index 82b7ba6..6b5aa1b 100644 (file)
@@ -719,7 +719,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
index dc3efba..e737960 100644 (file)
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 
 #ifdef CONFIG_TSEC_ENET
-#define CONFIG_NET_MULTI
 #define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1           1
index b59ecbb..e40bbfd 100644 (file)
@@ -78,7 +78,6 @@
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_NET_MULTI               1
 #define CONFIG_MII                     1
 #define CONFIG_MII_INIT                1
 #define CONFIG_SYS_DISCOVER_PHY
index 93d72f7..e80b0b5 100644 (file)
@@ -620,7 +620,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET     /* need PCIe reset errata */
-#define CONFIG_NET_MULTI
 #define CONFIG_E1000
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
index 37b1ce2..c5db4f3 100644 (file)
@@ -568,7 +568,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
-#define CONFIG_NET_MULTI
 #define CONFIG_E1000
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
index a128d53..e38a6f7 100644 (file)
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
index 54b7028..28f4de2 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC             1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                        0x1F
 #define CONFIG_MII                     1       /* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT          1
index 39f7a3c..c46eed9 100644 (file)
@@ -81,7 +81,6 @@
 /*
  * Ethernet
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_MAX_ADDR    32      /* this comes from <linux/phy.h> */
 #define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_FTGMAC100
index e9ffa48..646cb61 100644 (file)
@@ -49,7 +49,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x1
index a0e86ea..d4f4c23 100644 (file)
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 
index de14d11..445cb19 100644 (file)
@@ -87,7 +87,6 @@
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         0
 #define IMX_FEC_BASE                   MXS_ENET0_BASE
index 14b0781..e540e3f 100644 (file)
 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x0
index eaed7ea..8374733 100644 (file)
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
index 389f75b..5e8c14d 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_DW_AUTONEG
-#define CONFIG_NET_MULTI
 
 /*
  * Command line configuration
index 7032ef9..73f3bfe 100644 (file)
@@ -69,7 +69,6 @@
  */
 #define ADI_CMDS_NETWORK
 #define CONFIG_NETCONSOLE
-#define CONFIG_NET_MULTI
 #define CONFIG_HOSTNAME                "bf609-ezkit"
 #define CONFIG_PHY_ADDR                1
 #define CONFIG_DW_PORTS                1
index 910f699..7f364cd 100644 (file)
@@ -42,7 +42,6 @@
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #endif
 
 /* SPI */
index a82e8bc..70f1226 100644 (file)
 #define CONFIG_MII_SUPPRESS_PREAMBLE
 #define CONFIG_MII
 #define CONFIG_PHY_ADDR                1
-#define CONFIG_NET_MULTI
 #undef CONFIG_NETCONSOLE
 
 /* SDRAM configuration */
index 0dc28c7..04f0383 100644 (file)
@@ -49,7 +49,6 @@
 #define CONFIG_SPI_FLASH_SPANSION
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x1
index c1ca56c..8b4278d 100644 (file)
 #define CONFIG_TSEC1
 #define CONFIG_TSEC2
 #define CONFIG_TSEC_ENET
-#define CONFIG_NET_MULTI
 #define CONFIG_HARD_SPI
 #define CONFIG_HARD_I2C
 
index ad1614a..71ca77a 100644 (file)
@@ -46,7 +46,6 @@
 #define CONFIG_DOS_PARTITION
 
 /* Ethernet on FEC */
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 
 #define CONFIG_FEC_MXC
index 8439db7..12eb172 100644 (file)
@@ -68,7 +68,6 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI
 #define CONFIG_TULIP
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
index 1dffab1..61c015f 100644 (file)
@@ -49,7 +49,6 @@
 #define CONFIG_SPI_FLASH_SPANSION
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x1
index 42280ca..036f2cb 100644 (file)
@@ -98,7 +98,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         32
-#define CONFIG_NET_MULTI
 #define CONFIG_SYS_SGMII_REFCLK_MHZ    312
 #define CONFIG_SYS_SGMII_LINERATE_MHZ  1250
 #define CONFIG_SYS_SGMII_RATESCALE     2
index ac74ae7..7111b08 100644 (file)
 #define TMU_CLK_DIVIDER                (4)     /* 4 (default), 16, 64, 256 or 1024 */
 
 /* Ether */
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_SMC911X
index e830c6d..f121b9c 100644 (file)
@@ -49,7 +49,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x1
index c7f5033..ca913b0 100644 (file)
@@ -526,7 +526,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE_MEM_SIZE       0x08000000      /* 128M */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
index cc8c936..6b6f2ba 100644 (file)
 #define CONFIG_SYS_PCIE_MEM_SIZE       0x08000000      /* 128M */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
index a0f44d9..cd2b080 100644 (file)
@@ -304,7 +304,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
index 1d7f2c9..0837fcd 100644 (file)
@@ -269,7 +269,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
index 03ff885..bc0ae28 100644 (file)
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 
index ab5475e..91a7413 100644 (file)
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #endif
 
 /*
index 322e074..58dc98a 100644 (file)
@@ -302,7 +302,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xffc00000
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP /* do pci plug-and-play */
 #define CONFIG_E1000   /* Defind e1000 pci Ethernet card*/
 #define CONFIG_CMD_PCI
@@ -313,10 +312,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
index 601c919..45c2df6 100644 (file)
 #define CONFIG_USB_ETH_RNDIS
 #endif /* CONFIG_MUSB_GADGET */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
index 9703c84..f85d39c 100644 (file)
@@ -50,7 +50,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x1
index f678021..cf9e2ff 100644 (file)
@@ -135,7 +135,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
index bfd8aa7..c4141a0 100644 (file)
@@ -74,7 +74,6 @@
 /* Ethernet Hardware */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_MACB_SEARCH_PHY
 #define CONFIG_RGMII
index 61f5107..f086e73 100644 (file)
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
 
 #define CONFIG_NAND
 /* NAND support */
index 161e0a5..ccfcede 100644 (file)
@@ -50,7 +50,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define        CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       0x1
index e742acf..5ba2f6a 100644 (file)
@@ -97,7 +97,6 @@
  * Ethernet on SoC (EMAC)
  */
 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-#define CONFIG_NET_MULTI
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_MII
 #define CONFIG_AUTONEG_TIMEOUT         (15 * CONFIG_SYS_HZ)
index 59455ab..30a3f50 100644 (file)
@@ -18,7 +18,6 @@
 
 /* Ethernet driver configuration */
 #define CONFIG_MII
-#define CONFIG_NET_MULTI
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
 #define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
index fd208b1..efd76da 100644 (file)
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
index 1dbd6c8..372a02b 100644 (file)
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ET1011C
index bef821f..7dfb6da 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         5
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
index 5b63076..d235da4 100644 (file)
@@ -74,7 +74,6 @@
 
 /* Ethernet config options */
 #define CONFIG_MII
-#define CONFIG_NET_MULTI
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
 #define CONFIG_PHY_ADDR                0       /* PHY address */
index be77e50..1a52e7d 100644 (file)
@@ -48,7 +48,6 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN