include/configs/T208xQDS.h

   1 /*
   2  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #define CONFIG_SYS_GENERIC_BOARD
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  17 #define CONFIG_MMC
  18 #define CONFIG_SPI_FLASH
  19 #define CONFIG_USB_EHCI
  20 #if defined(CONFIG_PPC_T2080)
  21 #define CONFIG_T2080QDS
  22 #define CONFIG_FSL_SATA_V2
  23 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  24 #define CONFIG_SRIO1            /* SRIO port 1 */
  25 #define CONFIG_SRIO2            /* SRIO port 2 */
  26 #elif defined(CONFIG_PPC_T2081)
  27 #define CONFIG_T2081QDS
  28 #endif
  29
  30 /* High Level Configuration Options */
  31 #define CONFIG_PHYS_64BIT
  32 #define CONFIG_BOOKE
  33 #define CONFIG_E500             /* BOOKE e500 family */
  34 #define CONFIG_E500MC           /* BOOKE e500mc family */
  35 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  36 #define CONFIG_MP               /* support multiple processors */
  37 #define CONFIG_ENABLE_36BIT_PHYS
  38
  39 #ifdef CONFIG_PHYS_64BIT
  40 #define CONFIG_ADDR_MAP 1
  41 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  42 #endif
  43
  44 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  45 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  46 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  47 #define CONFIG_FSL_CAAM         /* Enable SEC/CAAM */
  48 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 #ifdef CONFIG_RAMBOOT_PBL
  52 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  53 #if defined(CONFIG_PPC_T2080)
  54 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_rcw.cfg
  55 #elif defined(CONFIG_PPC_T2081)
  56 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
  57 #endif
  58
  59 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  60 #define CONFIG_SPL_ENV_SUPPORT
  61 #define CONFIG_SPL_SERIAL_SUPPORT
  62 #define CONFIG_SPL_FLUSH_IMAGE
  63 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  64 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  65 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  66 #define CONFIG_SPL_I2C_SUPPORT
  67 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69 #define CONFIG_SYS_TEXT_BASE            0x00201000
  70 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  71 #define CONFIG_SPL_PAD_TO               0x40000
  72 #define CONFIG_SPL_MAX_SIZE             0x28000
  73 #define RESET_VECTOR_OFFSET             0x27FFC
  74 #define BOOT_PAGE_OFFSET                0x27000
  75 #ifdef CONFIG_SPL_BUILD
  76 #define CONFIG_SPL_SKIP_RELOCATE
  77 #define CONFIG_SPL_COMMON_INIT_DDR
  78 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  79 #define CONFIG_SYS_NO_FLASH
  80 #endif
  81
  82 #ifdef CONFIG_NAND
  83 #define CONFIG_SPL_NAND_SUPPORT
  84 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  85 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  86 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  87 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  88 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  89 #define CONFIG_SPL_NAND_BOOT
  90 #endif
  91
  92 #ifdef CONFIG_SPIFLASH
  93 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  94 #define CONFIG_SPL_SPI_SUPPORT
  95 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  96 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  97 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  98 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  99 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
 100 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
 101 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 102 #ifndef CONFIG_SPL_BUILD
 103 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 104 #endif
 105 #define CONFIG_SPL_SPI_BOOT
 106 #endif
 107
 108 #ifdef CONFIG_SDCARD
 109 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
 110 #define CONFIG_SPL_MMC_SUPPORT
 111 #define CONFIG_SPL_MMC_MINIMAL
 112 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 113 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
 114 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
 115 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 116 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 117 #ifndef CONFIG_SPL_BUILD
 118 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 119 #endif
 120 #define CONFIG_SPL_MMC_BOOT
 121 #endif
 122
 123 #endif /* CONFIG_RAMBOOT_PBL */
 124
 125 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 126 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 127 /* Set 1M boot space */
 128 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 129 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 130                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 131 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 132 #define CONFIG_SYS_NO_FLASH
 133 #endif
 134
 135 #ifndef CONFIG_SYS_TEXT_BASE
 136 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 137 #endif
 138
 139 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 140 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 141 #endif
 142
 143 /*
 144  * These can be toggled for performance analysis, otherwise use default.
 145  */
 146 #define CONFIG_SYS_CACHE_STASHING
 147 #define CONFIG_BTB              /* toggle branch predition */
 148 #define CONFIG_DDR_ECC
 149 #ifdef CONFIG_DDR_ECC
 150 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 151 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 152 #endif
 153
 154 #ifndef CONFIG_SYS_NO_FLASH
 155 #define CONFIG_FLASH_CFI_DRIVER
 156 #define CONFIG_SYS_FLASH_CFI
 157 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 158 #endif
 159
 160 #if defined(CONFIG_SPIFLASH)
 161 #define CONFIG_SYS_EXTRA_ENV_RELOC
 162 #define CONFIG_ENV_IS_IN_SPI_FLASH
 163 #define CONFIG_ENV_SPI_BUS      0
 164 #define CONFIG_ENV_SPI_CS       0
 165 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 166 #define CONFIG_ENV_SPI_MODE     0
 167 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 168 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 169 #define CONFIG_ENV_SECT_SIZE    0x10000
 170 #elif defined(CONFIG_SDCARD)
 171 #define CONFIG_SYS_EXTRA_ENV_RELOC
 172 #define CONFIG_ENV_IS_IN_MMC
 173 #define CONFIG_SYS_MMC_ENV_DEV  0
 174 #define CONFIG_ENV_SIZE         0x2000
 175 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 176 #elif defined(CONFIG_NAND)
 177 #define CONFIG_SYS_EXTRA_ENV_RELOC
 178 #define CONFIG_ENV_IS_IN_NAND
 179 #define CONFIG_ENV_SIZE         0x2000
 180 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 181 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 182 #define CONFIG_ENV_IS_IN_REMOTE
 183 #define CONFIG_ENV_ADDR         0xffe20000
 184 #define CONFIG_ENV_SIZE         0x2000
 185 #elif defined(CONFIG_ENV_IS_NOWHERE)
 186 #define CONFIG_ENV_SIZE         0x2000
 187 #else
 188 #define CONFIG_ENV_IS_IN_FLASH
 189 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 190 #define CONFIG_ENV_SIZE         0x2000
 191 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 192 #endif
 193
 194 #ifndef __ASSEMBLY__
 195 unsigned long get_board_sys_clk(void);
 196 unsigned long get_board_ddr_clk(void);
 197 #endif
 198
 199 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 200 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 201
 202 /*
 203  * Config the L3 Cache as L3 SRAM
 204  */
 205 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 206 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 207 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 208 #ifdef CONFIG_RAMBOOT_PBL
 209 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 210 #endif
 211 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 212 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 213 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 214 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 215
 216 #define CONFIG_SYS_DCSRBAR      0xf0000000
 217 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 218
 219 /* EEPROM */
 220 #define CONFIG_ID_EEPROM
 221 #define CONFIG_SYS_I2C_EEPROM_NXID
 222 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 223 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 224 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 225
 226 /*
 227  * DDR Setup
 228  */
 229 #define CONFIG_VERY_BIG_RAM
 230 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 231 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 232 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 233 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 234 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 235 #define CONFIG_DDR_SPD
 236 #define CONFIG_SYS_FSL_DDR3
 237 #define CONFIG_FSL_DDR_INTERACTIVE
 238 #define CONFIG_SYS_SPD_BUS_NUM  0
 239 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 240 #define SPD_EEPROM_ADDRESS1     0x51
 241 #define SPD_EEPROM_ADDRESS2     0x52
 242 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 243 #define CTRL_INTLV_PREFERED     cacheline
 244
 245 /*
 246  * IFC Definitions
 247  */
 248 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 249 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 250 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 251 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 252                                 + 0x8000000) | \
 253                                 CSPR_PORT_SIZE_16 | \
 254                                 CSPR_MSEL_NOR | \
 255                                 CSPR_V)
 256 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 257 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 258                                 CSPR_PORT_SIZE_16 | \
 259                                 CSPR_MSEL_NOR | \
 260                                 CSPR_V)
 261 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 262 /* NOR Flash Timing Params */
 263 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 264
 265 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 266                                 FTIM0_NOR_TEADC(0x5) | \
 267                                 FTIM0_NOR_TEAHC(0x5))
 268 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 269                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 270                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 271 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 272                                 FTIM2_NOR_TCH(0x4) | \
 273                                 FTIM2_NOR_TWPH(0x0E) | \
 274                                 FTIM2_NOR_TWP(0x1c))
 275 #define CONFIG_SYS_NOR_FTIM3    0x0
 276
 277 #define CONFIG_SYS_FLASH_QUIET_TEST
 278 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 279
 280 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 281 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 282 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 283 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 284
 285 #define CONFIG_SYS_FLASH_EMPTY_INFO
 286 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 287                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 288
 289 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 290 #define QIXIS_BASE                      0xffdf0000
 291 #define QIXIS_LBMAP_SWITCH              6
 292 #define QIXIS_LBMAP_MASK                0x0f
 293 #define QIXIS_LBMAP_SHIFT               0
 294 #define QIXIS_LBMAP_DFLTBANK            0x00
 295 #define QIXIS_LBMAP_ALTBANK             0x04
 296 #define QIXIS_RST_CTL_RESET             0x83
 297 #define QIXIS_RST_FORCE_MEM             0x1
 298 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 299 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 300 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 301 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 302
 303 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 304 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 305                                 | CSPR_PORT_SIZE_8 \
 306                                 | CSPR_MSEL_GPCM \
 307                                 | CSPR_V)
 308 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 309 #define CONFIG_SYS_CSOR3        0x0
 310 /* QIXIS Timing parameters for IFC CS3 */
 311 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 312                                         FTIM0_GPCM_TEADC(0x0e) | \
 313                                         FTIM0_GPCM_TEAHC(0x0e))
 314 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 315                                         FTIM1_GPCM_TRAD(0x3f))
 316 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 317                                         FTIM2_GPCM_TCH(0x8) | \
 318                                         FTIM2_GPCM_TWP(0x1f))
 319 #define CONFIG_SYS_CS3_FTIM3            0x0
 320
 321 /* NAND Flash on IFC */
 322 #define CONFIG_NAND_FSL_IFC
 323 #define CONFIG_SYS_NAND_BASE            0xff800000
 324 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 325
 326 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 327 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 328                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 329                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 330                                 | CSPR_V)
 331 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 332
 333 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 334                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 335                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 336                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 337                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 338                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 339                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 340
 341 #define CONFIG_SYS_NAND_ONFI_DETECTION
 342
 343 /* ONFI NAND Flash mode0 Timing Params */
 344 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 345                                         FTIM0_NAND_TWP(0x18)    | \
 346                                         FTIM0_NAND_TWCHT(0x07)  | \
 347                                         FTIM0_NAND_TWH(0x0a))
 348 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 349                                         FTIM1_NAND_TWBE(0x39)   | \
 350                                         FTIM1_NAND_TRR(0x0e)    | \
 351                                         FTIM1_NAND_TRP(0x18))
 352 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 353                                         FTIM2_NAND_TREH(0x0a)   | \
 354                                         FTIM2_NAND_TWHRE(0x1e))
 355 #define CONFIG_SYS_NAND_FTIM3           0x0
 356
 357 #define CONFIG_SYS_NAND_DDR_LAW         11
 358 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 359 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 360 #define CONFIG_CMD_NAND
 361 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 362
 363 #if defined(CONFIG_NAND)
 364 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 365 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 366 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 367 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 368 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 369 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 370 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 371 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 372 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 373 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 374 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 375 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 376 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 377 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 378 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 379 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 380 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 381 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 382 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 383 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 384 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 385 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 386 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 387 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 388 #else
 389 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 390 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 391 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 392 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 393 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 394 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 395 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 396 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 397 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 398 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 399 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 400 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 401 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 402 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 403 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 404 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 405 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 406 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 407 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 408 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 409 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 410 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 411 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 412 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 413 #endif
 414
 415 #if defined(CONFIG_RAMBOOT_PBL)
 416 #define CONFIG_SYS_RAMBOOT
 417 #endif
 418
 419 #ifdef CONFIG_SPL_BUILD
 420 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 421 #else
 422 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 423 #endif
 424
 425 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 426 #define CONFIG_MISC_INIT_R
 427 #define CONFIG_HWCONFIG
 428
 429 /* define to use L1 as initial stack */
 430 #define CONFIG_L1_INIT_RAM
 431 #define CONFIG_SYS_INIT_RAM_LOCK
 432 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 434 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 435 /* The assembler doesn't like typecast */
 436 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 437                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 438                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 439 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 440 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 441                                                 GENERATED_GBL_DATA_SIZE)
 442 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 443 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 444 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 445
 446 /*
 447  * Serial Port
 448  */
 449 #define CONFIG_CONS_INDEX               1
 450 #define CONFIG_SYS_NS16550
 451 #define CONFIG_SYS_NS16550_SERIAL
 452 #define CONFIG_SYS_NS16550_REG_SIZE     1
 453 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 454 #define CONFIG_SYS_BAUDRATE_TABLE       \
 455         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 456 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 457 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 458 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 459 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 460
 461 /* Use the HUSH parser */
 462 #define CONFIG_SYS_HUSH_PARSER
 463 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 464
 465 /* pass open firmware flat tree */
 466 #define CONFIG_OF_LIBFDT
 467 #define CONFIG_OF_BOARD_SETUP
 468 #define CONFIG_OF_STDOUT_VIA_ALIAS
 469
 470 /* new uImage format support */
 471 #define CONFIG_FIT
 472 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 473
 474 /*
 475  * I2C
 476  */
 477 #define CONFIG_SYS_I2C
 478 #define CONFIG_SYS_I2C_FSL
 479 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 480 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 481 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 482 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 483 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 484 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 485 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 486 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 487 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 488 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 489 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 490 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 491 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 492 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 493 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 494 #define I2C_MUX_CH_DEFAULT      0x8
 495
 496 #define I2C_MUX_CH_VOL_MONITOR 0xa
 497
 498 /* Voltage monitor on channel 2*/
 499 #define I2C_VOL_MONITOR_ADDR           0x40
 500 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 501 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 502 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 503
 504 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 505 #ifndef CONFIG_SPL_BUILD
 506 #define CONFIG_VID
 507 #endif
 508 #define CONFIG_VOL_MONITOR_IR36021_SET
 509 #define CONFIG_VOL_MONITOR_IR36021_READ
 510 /* The lowest and highest voltage allowed for T208xQDS */
 511 #define VDD_MV_MIN                      819
 512 #define VDD_MV_MAX                      1212
 513
 514 /*
 515  * RapidIO
 516  */
 517 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 518 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 519 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 520 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 521 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 522 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 523 /*
 524  * for slave u-boot IMAGE instored in master memory space,
 525  * PHYS must be aligned based on the SIZE
 526  */
 527 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 528 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 529 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 530 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 531 /*
 532  * for slave UCODE and ENV instored in master memory space,
 533  * PHYS must be aligned based on the SIZE
 534  */
 535 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 536 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 537 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 538
 539 /* slave core release by master*/
 540 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 541 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 542
 543 /*
 544  * SRIO_PCIE_BOOT - SLAVE
 545  */
 546 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 547 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 548 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 549                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 550 #endif
 551
 552 /*
 553  * eSPI - Enhanced SPI
 554  */
 555 #ifdef CONFIG_SPI_FLASH
 556 #define CONFIG_FSL_ESPI
 557 #define CONFIG_SPI_FLASH_STMICRO
 558 #ifndef CONFIG_SPL_BUILD
 559 #define CONFIG_SPI_FLASH_SST
 560 #define CONFIG_SPI_FLASH_EON
 561 #endif
 562
 563 #define CONFIG_CMD_SF
 564 #define CONFIG_SPI_FLASH_BAR
 565 #define CONFIG_SF_DEFAULT_SPEED  10000000
 566 #define CONFIG_SF_DEFAULT_MODE    0
 567 #endif
 568
 569 /*
 570  * General PCI
 571  * Memory space is mapped 1-1, but I/O space must start from 0.
 572  */
 573 #define CONFIG_PCI              /* Enable PCI/PCIE */
 574 #define CONFIG_PCIE1            /* PCIE controler 1 */
 575 #define CONFIG_PCIE2            /* PCIE controler 2 */
 576 #define CONFIG_PCIE3            /* PCIE controler 3 */
 577 #define CONFIG_PCIE4            /* PCIE controler 4 */
 578 #define CONFIG_FSL_PCIE_RESET
 579 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 580 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 581 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 582 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 583 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 584 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 585 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 586 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 587 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 588 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 589 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 590
 591 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 592 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 593 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 594 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 595 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 596 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 597 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 598 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 599 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 600
 601 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 602 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 603 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 604 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 605 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 606 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 607 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 608 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 609 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 610
 611 /* controller 4, Base address 203000 */
 612 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 613 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 614 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 615 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 616 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 617 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 618 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 619
 620 #ifdef CONFIG_PCI
 621 #define CONFIG_PCI_INDIRECT_BRIDGE
 622 #define CONFIG_FSL_PCIE_RESET      /* need PCIe reset errata */
 623 #define CONFIG_E1000
 624 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 625 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 626 #define CONFIG_DOS_PARTITION
 627 #endif
 628
 629 /* Qman/Bman */
 630 #ifndef CONFIG_NOBQFMAN
 631 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 632 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 633 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 634 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 635 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 636 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 637 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 638 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 639 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 640 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 641                                         CONFIG_SYS_BMAN_CENA_SIZE)
 642 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 643 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 644 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 645 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 646 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 647 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 648 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 649 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 650 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 651 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 652 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 653                                         CONFIG_SYS_QMAN_CENA_SIZE)
 654 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 655 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 656
 657 #define CONFIG_SYS_DPAA_FMAN
 658 #define CONFIG_SYS_DPAA_PME
 659 #define CONFIG_SYS_PMAN
 660 #define CONFIG_SYS_DPAA_DCE
 661 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 662 #define CONFIG_SYS_INTERLAKEN
 663
 664 /* Default address of microcode for the Linux Fman driver */
 665 #if defined(CONFIG_SPIFLASH)
 666 /*
 667  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 668  * env, so we got 0x110000.
 669  */
 670 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 671 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 672 #elif defined(CONFIG_SDCARD)
 673 /*
 674  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 675  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 676  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 677  */
 678 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 679 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 680 #elif defined(CONFIG_NAND)
 681 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 682 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 683 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 684 /*
 685  * Slave has no ucode locally, it can fetch this from remote. When implementing
 686  * in two corenet boards, slave's ucode could be stored in master's memory
 687  * space, the address can be mapped from slave TLB->slave LAW->
 688  * slave SRIO or PCIE outbound window->master inbound window->
 689  * master LAW->the ucode address in master's memory space.
 690  */
 691 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 692 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 693 #else
 694 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 695 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 696 #endif
 697 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 698 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 699 #endif /* CONFIG_NOBQFMAN */
 700
 701 #ifdef CONFIG_SYS_DPAA_FMAN
 702 #define CONFIG_FMAN_ENET
 703 #define CONFIG_PHYLIB_10G
 704 #define CONFIG_PHY_VITESSE
 705 #define CONFIG_PHY_REALTEK
 706 #define CONFIG_PHY_TERANETICS
 707 #define RGMII_PHY1_ADDR 0x1
 708 #define RGMII_PHY2_ADDR 0x2
 709 #define FM1_10GEC1_PHY_ADDR       0x3
 710 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 711 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 712 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 713 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 714 #endif
 715
 716 #ifdef CONFIG_FMAN_ENET
 717 #define CONFIG_MII              /* MII PHY management */
 718 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 719 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 720 #endif
 721
 722 /*
 723  * SATA
 724  */
 725 #ifdef CONFIG_FSL_SATA_V2
 726 #define CONFIG_LIBATA
 727 #define CONFIG_FSL_SATA
 728 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 729 #define CONFIG_SATA1
 730 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 731 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 732 #define CONFIG_SATA2
 733 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 734 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 735 #define CONFIG_LBA48
 736 #define CONFIG_CMD_SATA
 737 #define CONFIG_DOS_PARTITION
 738 #define CONFIG_CMD_EXT2
 739 #endif
 740
 741 /*
 742  * USB
 743  */
 744 #ifdef CONFIG_USB_EHCI
 745 #define CONFIG_CMD_USB
 746 #define CONFIG_USB_STORAGE
 747 #define CONFIG_USB_EHCI_FSL
 748 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 749 #define CONFIG_CMD_EXT2
 750 #define CONFIG_HAS_FSL_DR_USB
 751 #endif
 752
 753 /*
 754  * SDHC
 755  */
 756 #ifdef CONFIG_MMC
 757 #define CONFIG_CMD_MMC
 758 #define CONFIG_FSL_ESDHC
 759 #define define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 760 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 761 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 762 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 763 #define CONFIG_GENERIC_MMC
 764 #define CONFIG_CMD_EXT2
 765 #define CONFIG_CMD_FAT
 766 #define CONFIG_DOS_PARTITION
 767 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 768 #endif
 769
 770
 771 /*
 772  * Dynamic MTD Partition support with mtdparts
 773  */
 774 #ifndef CONFIG_SYS_NO_FLASH
 775 #define CONFIG_MTD_DEVICE
 776 #define CONFIG_MTD_PARTITIONS
 777 #define CONFIG_CMD_MTDPARTS
 778 #define CONFIG_FLASH_CFI_MTD
 779 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 780                         "spi0=spife110000.0"
 781 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 782                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 783                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 784                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 785 #endif
 786
 787 /*
 788  * Environment
 789  */
 790 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 791 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 792
 793 /*
 794  * Command line configuration.
 795  */
 796 #include <config_cmd_default.h>
 797
 798 #define CONFIG_CMD_DHCP
 799 #define CONFIG_CMD_ELF
 800 #define CONFIG_CMD_ERRATA
 801 #define CONFIG_CMD_GREPENV
 802 #define CONFIG_CMD_IRQ
 803 #define CONFIG_CMD_I2C
 804 #define CONFIG_CMD_MII
 805 #define CONFIG_CMD_PING
 806 #define CONFIG_CMD_REGINFO
 807 #define CONFIG_CMD_BDI
 808
 809 #ifdef CONFIG_PCI
 810 #define CONFIG_CMD_PCI
 811 #endif
 812
 813 /* Hash command with SHA acceleration supported in hardware */
 814 #ifdef CONFIG_FSL_CAAM
 815 #define CONFIG_CMD_HASH
 816 #define CONFIG_SHA_HW_ACCEL
 817 #endif
 818
 819 /*
 820  * Miscellaneous configurable options
 821  */
 822 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 823 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 824 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 825 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 826 #ifdef CONFIG_CMD_KGDB
 827 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 828 #else
 829 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 830 #endif
 831 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 832 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 833 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 834
 835 /*
 836  * For booting Linux, the board info and command line data
 837  * have to be in the first 64 MB of memory, since this is
 838  * the maximum mapped by the Linux kernel during initialization.
 839  */
 840 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 841 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 842
 843 #ifdef CONFIG_CMD_KGDB
 844 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 845 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 846 #endif
 847
 848 /*
 849  * Environment Configuration
 850  */
 851 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 852 #define CONFIG_BOOTFILE  "uImage"
 853 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 854
 855 /* default location for tftp and bootm */
 856 #define CONFIG_LOADADDR         1000000
 857 #define CONFIG_BAUDRATE         115200
 858 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 859 #define __USB_PHY_TYPE          utmi
 860
 861 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 862         "hwconfig=fsl_ddr:"                                     \
 863         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 864         "bank_intlv=auto;"                                      \
 865         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 866         "netdev=eth0\0"                                         \
 867         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 868         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 869         "tftpflash=tftpboot $loadaddr $uboot && "               \
 870         "protect off $ubootaddr +$filesize && "                 \
 871         "erase $ubootaddr +$filesize && "                       \
 872         "cp.b $loadaddr $ubootaddr $filesize && "               \
 873         "protect on $ubootaddr +$filesize && "                  \
 874         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 875         "consoledev=ttyS0\0"                                    \
 876         "ramdiskaddr=2000000\0"                                 \
 877         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 878         "fdtaddr=c00000\0"                                      \
 879         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 880         "bdev=sda3\0"
 881
 882 /*
 883  * For emulation this causes u-boot to jump to the start of the
 884  * proof point app code automatically
 885  */
 886 #define CONFIG_PROOF_POINTS                             \
 887         "setenv bootargs root=/dev/$bdev rw "           \
 888         "console=$consoledev,$baudrate $othbootargs;"   \
 889         "cpu 1 release 0x29000000 - - -;"               \
 890         "cpu 2 release 0x29000000 - - -;"               \
 891         "cpu 3 release 0x29000000 - - -;"               \
 892         "cpu 4 release 0x29000000 - - -;"               \
 893         "cpu 5 release 0x29000000 - - -;"               \
 894         "cpu 6 release 0x29000000 - - -;"               \
 895         "cpu 7 release 0x29000000 - - -;"               \
 896         "go 0x29000000"
 897
 898 #define CONFIG_HVBOOT                           \
 899         "setenv bootargs config-addr=0x60000000; "      \
 900         "bootm 0x01000000 - 0x00f00000"
 901
 902 #define CONFIG_ALU                              \
 903         "setenv bootargs root=/dev/$bdev rw "           \
 904         "console=$consoledev,$baudrate $othbootargs;"   \
 905         "cpu 1 release 0x01000000 - - -;"               \
 906         "cpu 2 release 0x01000000 - - -;"               \
 907         "cpu 3 release 0x01000000 - - -;"               \
 908         "cpu 4 release 0x01000000 - - -;"               \
 909         "cpu 5 release 0x01000000 - - -;"               \
 910         "cpu 6 release 0x01000000 - - -;"               \
 911         "cpu 7 release 0x01000000 - - -;"               \
 912         "go 0x01000000"
 913
 914 #define CONFIG_LINUX                            \
 915         "setenv bootargs root=/dev/ram rw "             \
 916         "console=$consoledev,$baudrate $othbootargs;"   \
 917         "setenv ramdiskaddr 0x02000000;"                \
 918         "setenv fdtaddr 0x00c00000;"                    \
 919         "setenv loadaddr 0x1000000;"                    \
 920         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 921
 922 #define CONFIG_HDBOOT                                   \
 923         "setenv bootargs root=/dev/$bdev rw "           \
 924         "console=$consoledev,$baudrate $othbootargs;"   \
 925         "tftp $loadaddr $bootfile;"                     \
 926         "tftp $fdtaddr $fdtfile;"                       \
 927         "bootm $loadaddr - $fdtaddr"
 928
 929 #define CONFIG_NFSBOOTCOMMAND                   \
 930         "setenv bootargs root=/dev/nfs rw "     \
 931         "nfsroot=$serverip:$rootpath "          \
 932         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 933         "console=$consoledev,$baudrate $othbootargs;"   \
 934         "tftp $loadaddr $bootfile;"             \
 935         "tftp $fdtaddr $fdtfile;"               \
 936         "bootm $loadaddr - $fdtaddr"
 937
 938 #define CONFIG_RAMBOOTCOMMAND                           \
 939         "setenv bootargs root=/dev/ram rw "             \
 940         "console=$consoledev,$baudrate $othbootargs;"   \
 941         "tftp $ramdiskaddr $ramdiskfile;"               \
 942         "tftp $loadaddr $bootfile;"                     \
 943         "tftp $fdtaddr $fdtfile;"                       \
 944         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 945
 946 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 947
 948 #ifdef CONFIG_SECURE_BOOT
 949 #include <asm/fsl_secure_boot.h>
 950 #define CONFIG_CMD_BLOB
 951 #undef CONFIG_CMD_USB
 952 #endif
 953
 954 #endif  /* __T208xQDS_H */