enable SNTP support in some boards.
Changes for U-Boot 1.1.3:
======================================================================
+* Fix problems with SNTP support;
+ enable SNTP support in some boards.
+
* Patches by Martin Krause, 01 Apr 2005:
- Fix flash erase timeout on CMC_PU2
- Add automatic HW detection for CMC_PU2 and CMC_BASIC
-indent: Standard input:49: Warning:old style assignment ambiguity in "=*". Assuming "= *"
-
/*
* (C) Copyright 2001
*
if (NetOurNISDomain[0])
setenv ("domain", NetOurNISDomain);
-#if (CONFIG_BOOTP_MASK & CONFIG_BOOTP_TIMEOFFSET)
+#if (CONFIG_COMMANDS & CFG_CMD_SNTP) && (CONFIG_BOOTP_MASK & CONFIG_BOOTP_TIMEOFFSET)
if (NetTimeOffset) {
sprintf (tmp, "%d", NetTimeOffset);
setenv ("timeoffset", tmp);
}
#endif
-#if (CONFIG_BOOTP_MASK & CONFIG_BOOTP_NTPSERVER)
+#if (CONFIG_COMMANDS & CFG_CMD_SNTP) && (CONFIG_BOOTP_MASK & CONFIG_BOOTP_NTPSERVER)
if (NetNtpServerIP) {
ip_to_string (NetNtpServerIP, tmp);
setenv ("ntpserverip", tmp);
#include <common.h>
#include <command.h>
+#include <asm/byteorder.h>
#if (CONFIG_COMMANDS & CFG_CMD_USB)
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define MPC8XX_XIN 5000000 /* 5 MHz in */
#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \
- CFG_CMD_DATE )
+ CFG_CMD_DATE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/*
* Supported commands
*/
-/* CONFIG_CMD_DFL includes CFG_CMD_BDI (bdinfo), CFG_CMD_LOADS (loads),
- CFG_CMD_LOADB (loadb), CFG_CMD_IMI (iminfo), CFG_CMD_FLASH
- (flinfo, erase, protect), CFG_CMD_MEMORY (md, mm, nm, mw, cp, cmp,
- crc, base, loop, mtest), CFG_CMD_ENV (printenv, setenv, saveenv),
- CFG_CMD_BOOTD (bootd), CFG_CMD_CONSOLE (coninfo), CFG_CMD_NET (bootp,
- tftpboot, rarpboot), CFG_CMD_RUN, CFG_CMD_MISC (sleep, etc),
- CFG_CMD_BSP, CFG_CMD_IMLS, CFG_CMD_FPGA */
-
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CACHE | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM \
- )
-/* CFG_CMD_DHCP | \ */
-/* CFG_CMD_MII | \ */
-/* CFG_CMD_PCI | \ */
-/* CFG_CMD_USB */
-
-# define CONFIG_NET_MULTI
-/*#if (CONFIG_COMMANDS & CFG_CMD_NET)
-# define CONFIG_NET_MULTI
-#else
-# undef CONFIG_NET_MULTI
-#endif*/
-
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_PCI | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
+
+#define CONFIG_NET_MULTI
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* ueberarbeitet durch Christoph Seyfert
*
- * (C) Copyright 2004 DENX Software Engineering,
+ * (C) Copyright 2004-2005 DENX Software Engineering,
* Wolfgang Grandegger <wg@denx.de>
* (C) Copyright 2003
* DAVE Srl
#endif
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
CFG_CMD_ELF | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_NAND )
+ CFG_CMD_NAND | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 19200 /* console baudrate in bps */
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_IPADDR 192.168.0.42
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BSP | \
CFG_CMD_DHCP | \
CFG_CMD_DATE | \
CFG_CMD_EEPROM | \
- CFG_CMD_BSP )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2001-2003
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
- CFG_CMD_SDRAM )
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
*/
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT \
"echo; " \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS; " \
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_DOC )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_BEDBUG | \
+ 0 /* CFG_CMD_DATE */ | \
CFG_CMD_DHCP | \
CFG_CMD_PCI | \
- 0 /* CFG_CMD_DATE */ )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
*/
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#endif
#define CONFIG_BOOTCOMMAND "bootm 40040000" /* autoboot command */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CONFIG_BOOTARGS "root=/dev/nfs rw " \
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
CFG_CMD_DHCP | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
- CFG_CMD_IDE )
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#else
# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
- CFG_CMD_IDE )
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
/*
- * (C) Copyright 2001-2002
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#endif
#endif
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" \
"\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 $(filesize)\0"
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM)
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define ADD_USB_CMD 0
#endif
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/*
* Supported commands
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- ADD_PCI_CMD | \
- ADD_USB_CMD)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
*
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
#endif
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_BOARD_TYPES 1 /* support board types */
#endif
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_I2C | \
- CFG_CMD_DATE | \
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
CFG_CMD_POST_DIAG | \
- CFG_CMD_IDE )
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
*
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
#endif
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CFG_8XX_FACT 8 /* Multiply by 8 */
#endif
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
+ CFG_CMD_FAT | \
CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_POST_DIAG | \
CFG_CMD_IDE | \
- CFG_CMD_USB | \
- CFG_CMD_FAT)
+ CFG_CMD_NFS | \
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_USB )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BAUDRATE 115200
-#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_KGDB | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_USB | \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG
+#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
+ CFG_CMD_BMP | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DOC | \
+ CFG_CMD_DTT | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
+ CFG_CMD_FAT | \
+ CFG_CMD_FDC | \
+ CFG_CMD_FDOS | \
+ CFG_CMD_HWFLOW | \
+ CFG_CMD_IDE | \
+ CFG_CMD_KGDB | \
+ CFG_CMD_MMC | \
+ CFG_CMD_NAND | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PCMCIA | \
+ CFG_CMD_REISER | \
+ CFG_CMD_SCSI | \
+ CFG_CMD_SPI | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_UNIVERSE | \
+ CFG_CMD_USB | \
+ CFG_CMD_VFD | \
+ CFG_CMD_XIMG
#if CONFIG_ADSTYPE >= CFG_PQ2FADS
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_VFD | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_USB | \
- CFG_CMD_XIMG ) )
+#define CONFIG_COMMANDS ( CFG_CMD_ALL & ~( \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_BMP | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_DTT | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
+ CFG_CMD_FDC | \
+ CFG_CMD_FDOS | \
+ CFG_CMD_HWFLOW | \
+ CFG_CMD_IDE | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_KGDB | \
+ CFG_CMD_MMC | \
+ CFG_CMD_NAND | \
+ CFG_CMD_PCMCIA | \
+ CFG_CMD_REISER | \
+ CFG_CMD_SCSI | \
+ CFG_CMD_SPI | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_VFD | \
+ CFG_CMD_UNIVERSE | \
+ CFG_CMD_USB | \
+ CFG_CMD_XIMG ) )
/* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset.
/*
- * (C) Copyright 2004
+ * (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_I2C | \
CFG_CMD_NAND | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_SERVERIP 10.1.2.2
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
CFG_CMD_BEDBUG | \
- CFG_CMD_PING | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_KGDB | \
CFG_CMD_MII | \
CFG_CMD_NET | \
- CFG_CMD_ELF )
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passed to Linux in MHz */
-
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTDELAY 5
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_ELF | \
- CFG_CMD_PCI )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_ELF | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SNTP )
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
/*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passed to Linux in MHz */
-
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTDELAY 5
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_ELF | \
- CFG_CMD_PCI | \
- CFG_CMD_SCSI )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_ELF | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SCSI | \
+ CFG_CMD_SNTP )
#define CONFIG_PCI 1
/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
/*
* Supported commands
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- ADD_DOC_CMD | \
- ADD_PCI_CMD | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- ADD_USB_CMD)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_DOC_CMD | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2001-2004
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
#ifdef CONFIG_PCI
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SNTP )
#else /* ! PCI */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#endif /* CONFIG_PCI */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
/*
- * (C) Copyright 2001-2004
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
#ifdef CONFIG_PCI
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SNTP )
#else /* ! PCI */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DOC | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#endif /* CONFIG_PCI */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
* (C) Copyright 2003
* DAVE Srl
*
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_ELF | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
CFG_CMD_NAND | \
- CFG_CMD_PCI )
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SNTP )
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_BMP | \
- CFG_CMD_DHCP | \
+ CFG_CMD_BSP | \
CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_JFFS2 | \
+ CFG_CMD_NFS | \
CFG_CMD_PCMCIA | \
- CFG_CMD_BSP )
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
~CFG_CMD_REISER & \
~CFG_CMD_SCSI & \
~CFG_CMD_SETGETDCR & \
+ ~CFG_CMD_SNTP & \
~CFG_CMD_SPI & \
~CFG_CMD_UNIVERSE & \
~CFG_CMD_USB & \
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_AUTOSCRIPT) | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_SDRAM | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PCI )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2001, 2002
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 9600
#define CONFIG_DRAM_SPEED 100 /* MHz */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PCI )
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_MII | \
+ CFG_CMD_NFS | \
CFG_CMD_PING | \
CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO )
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
CFG_CMD_BMP | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
- CFG_CMD_IDE )
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#else
# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
- CFG_CMD_IDE )
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2001-2003
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Copyright 2005 DENX Software Engineering
+ * Wolfgang Denk <wd@denx.de>
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2002,2003 Motorola,Inc.
* Xianghua Xiao <X.Xiao@motorola.com>
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
-#undef CONFIG_CLOCKS_IN_MHZ
-
-
#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */
#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #endif
+# define CONFIG_CMD_PRIV (CONFIG_CMD_DFL & ~(CFG_CMD_ENV | CFG_CMD_LOADS))
+#else
+# define CONFIG_CMD_PRIV (CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
+#endif
+
+#if defined(CONFIG_PCI)
+# define ADD_PCI_CMD (CFG_CMD_PCI)
#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #endif
+# define ADD_PCI_CMD 0
#endif
+#define CONFIG_COMMANDS (CONFIG_CMD_PRIV | \
+ ADD_PCI_CMD | \
+ CFG_CMD_PING | \
+ CFG_CMD_I2C )
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
CFG_CMD_DHCP | \
CFG_CMD_ELF | \
CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
CFG_CMD_SNTP )
#define CONFIG_NETCONSOLE
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_ELF | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
CFG_CMD_IDE | \
- CFG_CMD_I2C )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
- CFG_CMD_DATE )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
- * Gary Jennejohn <garyj@denx.de>
+ * 2004-2005 Gary Jennejohn <garyj@denx.de>
*
* Configuration settings for the CMC PU2 board.
*
#ifdef CONFIG_HARD_I2C
#define CONFIG_COMMANDS \
((CONFIG_CMD_DFL | \
- CFG_CMD_I2C | \
CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
- CFG_CMD_DHCP ) & \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP ) & \
~(CFG_CMD_FPGA | CFG_CMD_MISC) )
#else
#define CONFIG_COMMANDS \
((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP ) & \
+ CFG_CMD_DHCP | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP ) & \
~(CFG_CMD_FPGA | CFG_CMD_MISC) )
#define CONFIG_TIMESTAMP
#endif
/*
- * (C) Copyright 2003
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_PING )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ELF | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_SNTP )
#include <cmd_confdefs.h>
/*
/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* Supported commands
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
CFG_CMD_EXT2 | \
CFG_CMD_FAT | \
CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
CFG_CMD_PCI | \
+ CFG_CMD_SNTP | \
CFG_CMD_USB )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
+ CFG_CMD_BMP | \
+ CFG_CMD_BSP | \
CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
CFG_CMD_IDE | \
- CFG_CMD_BSP | \
- CFG_CMD_BMP | \
- CFG_CMD_POST_DIAG )
+ CFG_CMD_NFS | \
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_SNTP )
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CFG_SPI_INIT_OFFSET 0xB00
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BSP | \
CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
- CFG_CMD_BSP )
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#define CONFIG_BOOTP_MASK \
((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
/*
- * (C) Copyright 2003
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
/* default developmenmt environment */
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks passed to Linux in MHz. Needed for old kernels (2.4) crashes for new kernels */
-
#define CONFIG_ETHADDR 00:0B:17:00:00:00
#define CONFIG_IPADDR 10.10.69.10
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO)
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP )
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
/*
- * (C) Copyright 2003
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
- CFG_CMD_I2C )
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
#define CONFIG_RTC_S3C24X0 1
#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
- CFG_CMD_DATE)
+#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
+ CFG_CMD_DATE | \
+ CFG_CMD_SNTP )
#else
-#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | CFG_CMD_DATE)
+#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_SNTP )
#endif
#ifdef CONFIG_HWFLOW
/*
- * (C) Copyright 2002-2003
+ * (C) Copyright 2002-2005
* Gary Jennejohn <gj@denx.de>
*
* Configuation settings for the TRAB board.
#endif
#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CONFIG_COMMANDS_ADD_HWFLOW | \
- CONFIG_COMMANDS_ADD_VFD | \
- CONFIG_COMMANDS_ADD_EEPROM | \
- CFG_CMD_USB | \
- CFG_CMD_FAT | \
- CONFIG_COMMANDS_I2C )
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
+ CONFIG_COMMANDS_ADD_HWFLOW | \
+ CONFIG_COMMANDS_ADD_VFD | \
+ CONFIG_COMMANDS_ADD_EEPROM | \
+ CONFIG_COMMANDS_I2C | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_USB | \
+ CFG_CMD_FAT | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CONFIG_COMMANDS_ADD_HWFLOW | \
- CONFIG_COMMANDS_ADD_VFD | \
- CONFIG_COMMANDS_ADD_EEPROM | \
- CFG_CMD_USB | \
- CFG_CMD_FAT | \
- CONFIG_COMMANDS_I2C )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CONFIG_COMMANDS_ADD_HWFLOW | \
+ CONFIG_COMMANDS_ADD_VFD | \
+ CONFIG_COMMANDS_ADD_EEPROM | \
+ CONFIG_COMMANDS_I2C | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_USB | \
+ CFG_CMD_FAT | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
#endif
/* moved up */
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- CFG_CMD_IDE | \
CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
CFG_CMD_MII | \
+ CFG_CMD_NFS | \
CFG_CMD_PING | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE | \
- CFG_CMD_POST_DIAG )
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_SNTP )
#define CONFIG_NETCONSOLE
/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
* (C) Copyright 2004
* Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com
*
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DIAG | CFG_CMD_SDRAM) & ~CFG_CMD_DTT)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
case 1:
NetCopyIP (&NetOurSubnetMask, (popt + 2));
break;
-#if (CONFIG_BOOTP_MASK & CONFIG_BOOTP_TIMEOFFSET)
+#if (CONFIG_COMMANDS & CFG_CMD_SNTP) && (CONFIG_BOOTP_MASK & CONFIG_BOOTP_TIMEOFFSET)
case 2: /* Time offset */
NetCopyLong (&NetTimeOffset, (ulong *) (popt + 2));
NetTimeOffset = ntohl (NetTimeOffset);
memcpy (&NetOurRootPath, popt + 2, size);
NetOurRootPath[size] = 0;
break;
-#if (CONFIG_BOOTP_MASK & CONFIG_BOOTP_NTPSERVER)
+#if (CONFIG_COMMANDS & CFG_CMD_SNTP) && (CONFIG_BOOTP_MASK & CONFIG_BOOTP_NTPSERVER)
case 42: /* NTP server IP */
NetCopyIP (&NetNtpServerIP, (popt + 2));
break;
static void
SntpHandler (uchar *pkt, unsigned dest, unsigned src, unsigned len)
{
- struct sntp_pkt_t rpkt;
+ struct sntp_pkt_t *rpktp = (struct sntp_pkt_t *)pkt;
struct rtc_time tm;
+ ulong seconds;
debug ("%s\n", __FUNCTION__);
if (dest != SntpOurPort) return;
- memcpy ((unsigned char *)&rpkt, pkt, len);
+ /*
+ * As the RTC's used in U-Boot sepport second resolution only
+ * we simply ignore the sub-second field.
+ */
+ memcpy (&seconds, &rpktp->transmit_timestamp, sizeof(ulong));
-#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_TIMESTAMP)
-to_tm(ntohl(rpkt.transmit_timestamp), &tm);
-printf ("Date: %4d-%02d-%02d Time: %2d:%02d:%02d\n",
-tm.tm_year, tm.tm_mon, tm.tm_mday,
-tm.tm_hour, tm.tm_min, tm.tm_sec);
- to_tm(ntohl(rpkt.transmit_timestamp) - 2208988800u + NetTimeOffset, &tm);
+ to_tm(ntohl(seconds) - 2208988800UL + NetTimeOffset, &tm);
#if (CONFIG_COMMANDS & CFG_CMD_DATE)
rtc_set (&tm);
#endif
printf ("Date: %4d-%02d-%02d Time: %2d:%02d:%02d\n",
tm.tm_year, tm.tm_mon, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
-#endif
NetState = NETLOOP_SUCCESS;
}
projects / platform / kernel / u-boot.git / commitdiff