include/configs/s5pc210_universal.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2010 Samsung Electronics
   4  * Minkyu Kang <mk7.kang@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
   7  */
   8
   9 #ifndef __CONFIG_UNIVERSAL_H
  10 #define __CONFIG_UNIVERSAL_H
  11
  12 #include <configs/exynos4-common.h>
  13
  14 #define CONFIG_TIZEN                    /* TIZEN lib */
  15
  16 /* Keep L2 Cache Disabled */
  17
  18 /* Universal has 2 banks of DRAM */
  19 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  20 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  21
  22 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  23
  24 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  25                                         - GENERATED_GBL_DATA_SIZE)
  26
  27 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  28
  29 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  30
  31 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
  32
  33 #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
  34
  35 #define MBRPARTS_DEFAULT        "20M(permanent)"\
  36                                 ",20M(boot)"\
  37                                 ",1G(system)"\
  38                                 ",100M(swap)"\
  39                                 ",-(UMS)\0"
  40
  41 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  42         "updateb=" \
  43                 "onenand erase 0x0 0x100000;" \
  44                 "onenand write 0x42008000 0x0 0x100000\0" \
  45         "updatek=" \
  46                 "onenand erase 0xc00000 0x500000;" \
  47                 "onenand write 0x41008000 0xc00000 0x500000\0" \
  48         "bootk=" \
  49                 "run loaduimage; bootm 0x40007FC0\0" \
  50         "updatebackup=" \
  51                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
  52                 "mmc dev 0 0\0" \
  53         "updatebootb=" \
  54                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
  55         "lpj=lpj=3981312\0" \
  56         "ubifsboot=" \
  57                 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
  58                 "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
  59                 "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
  60                 "${lcdinfo} ${console} ${meminfo}; run bootk\0" \
  61         "tftpboot=" \
  62                 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
  63                 "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
  64                 "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
  65                 "${lcdinfo} ${console} ${meminfo}" \
  66                 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
  67         "nfsboot=" \
  68                 "set bootargs root=/dev/nfs rw " \
  69                 "nfsroot=${nfsroot},nolock,tcp " \
  70                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
  71                 "${netmask}:generic:usb0:off ${console} ${meminfo}" \
  72                 "; run bootk\0" \
  73         "ramfsboot=" \
  74                 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
  75                 "${console} ${meminfo} " \
  76                 "initrd=0x43000000,8M ramdisk=8192\0" \
  77         "mmcboot=" \
  78                 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
  79                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
  80                 "run loaduimage; bootm 0x40007FC0\0" \
  81         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
  82         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
  83         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
  84         "verify=n\0" \
  85         "rootfstype=ext4\0" \
  86         "console=console=ttySAC1,115200n8\0" \
  87         "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
  88         "mbrparts=" MBRPARTS_DEFAULT \
  89         "meminfo=crashkernel=32M@0x50000000\0" \
  90         "nfsroot=/nfsroot/arm\0" \
  91         "bootblock=10\0" \
  92         "ubiblock=9\0" \
  93         "ubi=enabled\0" \
  94         "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
  95         "mmcdev=0\0" \
  96         "mmcbootpart=2\0" \
  97         "mmcrootpart=3\0" \
  98         "opts=always_resume=1"
  99
 100 #define CONFIG_USE_ONENAND_BOARD_INIT
 101 #define CONFIG_SAMSUNG_ONENAND
 102 #define CONFIG_SYS_ONENAND_BASE         0x0C000000
 103
 104 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 105
 106 #ifndef __ASSEMBLY__
 107 void universal_spi_scl(int bit);
 108 void universal_spi_sda(int bit);
 109 int universal_spi_read(void);
 110 #endif
 111
 112 /* Common misc for Samsung */
 113 #define CONFIG_MISC_COMMON
 114
 115 /* Download menu - Samsung common */
 116 #define CONFIG_LCD_MENU
 117
 118 /* Download menu - definitions for check keys */
 119 #ifndef __ASSEMBLY__
 120
 121 #define KEY_PWR_PMIC_NAME               "MAX8998_PMIC"
 122 #define KEY_PWR_STATUS_REG              MAX8998_REG_STATUS1
 123 #define KEY_PWR_STATUS_MASK             (1 << 7)
 124 #define KEY_PWR_INTERRUPT_REG           MAX8998_REG_IRQ1
 125 #define KEY_PWR_INTERRUPT_MASK          (1 << 7)
 126
 127 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
 128 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
 129 #endif /* __ASSEMBLY__ */
 130
 131 /* LCD console */
 132 #define LCD_BPP                 LCD_COLOR16
 133
 134 /*
 135  * LCD Settings
 136  */
 137 #define CONFIG_LD9040
 138 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 139
 140 #endif  /* __CONFIG_H */