include/configs/mx6ul_14x14_evk.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6UL_14X14_EVK_CONFIG_H
   9 #define __MX6UL_14X14_EVK_CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <linux/sizes.h>
  13 #include "mx6_common.h"
  14 #include <asm/imx-common/gpio.h>
  15
  16 #define is_mx6ul_9x9_evk()      CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
  17
  18 /* SPL options */
  19 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  20 #define CONFIG_SPL_MMC_SUPPORT
  21 #include "imx6_spl.h"
  22
  23 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  24
  25 #define CONFIG_DISPLAY_CPUINFO
  26 #define CONFIG_DISPLAY_BOARDINFO
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  30
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_BOARD_LATE_INIT
  33
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_MXC_UART_BASE            UART1_BASE
  36
  37 /* MMC Configs */
  38 #ifdef CONFIG_FSL_USDHC
  39 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  40
  41 /* NAND pin conflicts with usdhc2 */
  42 #ifdef CONFIG_NAND_MXS
  43 #define CONFIG_SYS_FSL_USDHC_NUM        1
  44 #else
  45 #define CONFIG_SYS_FSL_USDHC_NUM        2
  46 #endif
  47
  48 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
  49 #endif
  50
  51 /* I2C configs */
  52 #ifdef CONFIG_CMD_I2C
  53 #define CONFIG_SYS_I2C
  54 #define CONFIG_SYS_I2C_MXC
  55 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  56 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  57 #define CONFIG_SYS_I2C_SPEED            100000
  58
  59 /* PMIC only for 9X9 EVK */
  60 #define CONFIG_POWER
  61 #define CONFIG_POWER_I2C
  62 #define CONFIG_POWER_PFUZE3000
  63 #define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
  64 #endif
  65
  66 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  67
  68 #define CONFIG_EXTRA_ENV_SETTINGS \
  69         "script=boot.scr\0" \
  70         "image=zImage\0" \
  71         "console=ttymxc0\0" \
  72         "fdt_high=0xffffffff\0" \
  73         "initrd_high=0xffffffff\0" \
  74         "fdt_file=undefined\0" \
  75         "fdt_addr=0x83000000\0" \
  76         "boot_fdt=try\0" \
  77         "ip_dyn=yes\0" \
  78         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  79         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  80         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  81         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  82         "mmcautodetect=yes\0" \
  83         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  84                 "root=${mmcroot}\0" \
  85         "loadbootscript=" \
  86                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  87         "bootscript=echo Running bootscript from mmc ...; " \
  88                 "source\0" \
  89         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  90         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  91         "mmcboot=echo Booting from mmc ...; " \
  92                 "run mmcargs; " \
  93                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  94                         "if run loadfdt; then " \
  95                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  96                         "else " \
  97                                 "if test ${boot_fdt} = try; then " \
  98                                         "bootz; " \
  99                                 "else " \
 100                                         "echo WARN: Cannot load the DT; " \
 101                                 "fi; " \
 102                         "fi; " \
 103                 "else " \
 104                         "bootz; " \
 105                 "fi;\0" \
 106         "netargs=setenv bootargs console=${console},${baudrate} " \
 107                 "root=/dev/nfs " \
 108         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 109                 "netboot=echo Booting from net ...; " \
 110                 "run netargs; " \
 111                 "if test ${ip_dyn} = yes; then " \
 112                         "setenv get_cmd dhcp; " \
 113                 "else " \
 114                         "setenv get_cmd tftp; " \
 115                 "fi; " \
 116                 "${get_cmd} ${image}; " \
 117                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 118                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 119                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 120                         "else " \
 121                                 "if test ${boot_fdt} = try; then " \
 122                                         "bootz; " \
 123                                 "else " \
 124                                         "echo WARN: Cannot load the DT; " \
 125                                 "fi; " \
 126                         "fi; " \
 127                 "else " \
 128                         "bootz; " \
 129                 "fi;\0" \
 130                 "findfdt="\
 131                         "if test $fdt_file = undefined; then " \
 132                                 "if test $board_name = EVK && test $board_rev = 9X9; then " \
 133                                         "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
 134                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
 135                                         "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
 136                                 "if test $fdt_file = undefined; then " \
 137                                         "echo WARNING: Could not determine dtb to use; fi; " \
 138                         "fi;\0" \
 139
 140 #define CONFIG_BOOTCOMMAND \
 141            "run findfdt;" \
 142            "mmc dev ${mmcdev};" \
 143            "mmc dev ${mmcdev}; if mmc rescan; then " \
 144                    "if run loadbootscript; then " \
 145                            "run bootscript; " \
 146                    "else " \
 147                            "if run loadimage; then " \
 148                                    "run mmcboot; " \
 149                            "else run netboot; " \
 150                            "fi; " \
 151                    "fi; " \
 152            "else run netboot; fi"
 153
 154 /* Miscellaneous configurable options */
 155 #define CONFIG_SYS_MEMTEST_START        0x80000000
 156 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
 157
 158 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 159 #define CONFIG_SYS_HZ                   1000
 160
 161 #define CONFIG_CMDLINE_EDITING
 162 #define CONFIG_STACKSIZE                SZ_128K
 163
 164 /* Physical Memory Map */
 165 #define CONFIG_NR_DRAM_BANKS            1
 166 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 167
 168 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 169 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 170 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 171
 172 #define CONFIG_SYS_INIT_SP_OFFSET \
 173         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 174 #define CONFIG_SYS_INIT_SP_ADDR \
 175         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 176
 177 /* FLASH and environment organization */
 178 #define CONFIG_SYS_NO_FLASH
 179
 180 #define CONFIG_ENV_SIZE                 SZ_8K
 181 #define CONFIG_ENV_IS_IN_MMC
 182 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 183 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
 184 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 185 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 186
 187 #define CONFIG_CMD_BOOTZ
 188 #define CONFIG_CMD_BMODE
 189
 190 #ifndef CONFIG_SYS_DCACHE_OFF
 191 #define CONFIG_CMD_CACHE
 192 #endif
 193
 194 #define CONFIG_FSL_QSPI
 195 #ifdef CONFIG_FSL_QSPI
 196 #define CONFIG_SPI_FLASH
 197 #define CONFIG_SPI_FLASH_BAR
 198 #define CONFIG_SF_DEFAULT_BUS           0
 199 #define CONFIG_SF_DEFAULT_CS            0
 200 #define CONFIG_SF_DEFAULT_SPEED 40000000
 201 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 202 #define CONFIG_SPI_FLASH_STMICRO
 203 #define FSL_QSPI_FLASH_NUM              1
 204 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 205 #endif
 206
 207 /* USB Configs */
 208 #ifdef CONFIG_CMD_USB
 209 #define CONFIG_USB_EHCI
 210 #define CONFIG_USB_EHCI_MX6
 211 #define CONFIG_USB_STORAGE
 212 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 213 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 214 #define CONFIG_MXC_USB_FLAGS   0
 215 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 216 #endif
 217
 218 #ifdef CONFIG_CMD_NET
 219 #define CONFIG_FEC_MXC
 220 #define CONFIG_MII
 221 #define CONFIG_FEC_ENET_DEV             1
 222
 223 #if (CONFIG_FEC_ENET_DEV == 0)
 224 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 225 #define CONFIG_FEC_MXC_PHYADDR          0x2
 226 #define CONFIG_FEC_XCV_TYPE             RMII
 227 #elif (CONFIG_FEC_ENET_DEV == 1)
 228 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 229 #define CONFIG_FEC_MXC_PHYADDR          0x1
 230 #define CONFIG_FEC_XCV_TYPE             RMII
 231 #endif
 232 #define CONFIG_ETHPRIME                 "FEC"
 233
 234 #define CONFIG_PHYLIB
 235 #define CONFIG_PHY_MICREL
 236 #endif
 237
 238 #define CONFIG_IMX_THERMAL
 239
 240 #ifndef CONFIG_SPL_BUILD
 241 #define CONFIG_VIDEO
 242 #ifdef CONFIG_VIDEO
 243 #define CONFIG_CFB_CONSOLE
 244 #define CONFIG_VIDEO_MXS
 245 #define CONFIG_VIDEO_LOGO
 246 #define CONFIG_VIDEO_SW_CURSOR
 247 #define CONFIG_VGA_AS_SINGLE_DEVICE
 248 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 249 #define CONFIG_SPLASH_SCREEN
 250 #define CONFIG_SPLASH_SCREEN_ALIGN
 251 #define CONFIG_CMD_BMP
 252 #define CONFIG_BMP_16BPP
 253 #define CONFIG_VIDEO_BMP_RLE8
 254 #define CONFIG_VIDEO_BMP_LOGO
 255 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 256 #endif
 257 #endif
 258
 259 #endif