include/configs/lsxl.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2012 Michael Walle
   4  * Michael Walle <michael@walle.cc>
   5  */
   6
   7 #ifndef _CONFIG_LSXL_H
   8 #define _CONFIG_LSXL_H
   9
  10 /*
  11  * Version number information
  12  */
  13 #if defined(CONFIG_LSCHLV2)
  14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  15 #elif defined(CONFIG_LSXHL)
  16 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  17 #else
  18 #error "unknown board"
  19 #endif
  20
  21 /*
  22  * General configuration options
  23  */
  24 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  25 #define CONFIG_KW88F6281                /* SOC Name */
  26
  27 #define CONFIG_KIRKWOOD_GPIO
  28
  29 #include "mv-common.h"
  30
  31 /* loading initramfs images without uimage header */
  32
  33 /*
  34  *  Environment variables configurations
  35  */
  36 #ifdef CONFIG_SPI_FLASH
  37 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  38 #define CONFIG_SYS_MAX_FLASH_SECT       8
  39 #endif
  40
  41 /*
  42  * Default environment variables
  43  */
  44
  45 #if defined(CONFIG_LSXHL)
  46 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
  47 #elif defined(CONFIG_LSCHLV2)
  48 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
  49 #else
  50 #error "Unsupported board"
  51 #endif
  52
  53 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  54         "bootsource=legacy\0"                                           \
  55         "hdpart=0:1\0"                                                  \
  56         "kernel_addr=0x00800000\0"                                      \
  57         "ramdisk_addr=0x01000000\0"                                     \
  58         "fdt_addr=0x00ff0000\0"                                         \
  59         "bootcmd_legacy=sata init "                                     \
  60                 "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
  61                 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
  62                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
  63         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
  64                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
  65                 "&& setenv ramdisk_len ${filesize} "                    \
  66                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
  67                 "&& bootz ${kernel_addr} "                              \
  68                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  69         "bootcmd_hdd=sata init "                                        \
  70                 "&& load sata ${hdpart} ${kernel_addr} /vmlinuz "       \
  71                 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "   \
  72                 "&& setenv ramdisk_len ${filesize} "                    \
  73                 "&& load sata ${hdpart} ${fdt_addr} /dtb "              \
  74                 "&& bootz ${kernel_addr} "                              \
  75                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  76         "bootcmd_usb=usb start "                                        \
  77                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
  78                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
  79                 "&& setenv ramdisk_len ${filesize} "                    \
  80                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
  81                 "&& bootz ${kernel_addr} "                              \
  82                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  83         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
  84         "eraseenv=sf probe 0 "                                          \
  85                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
  86                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
  87         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
  88                 "setenv autoload no "                                   \
  89                 "&& bootp "                                             \
  90                 "&& setenv ncip "                                       \
  91                 "&& setenv autoload ${autoload_old}; "                  \
  92                 "setenv autoload_old\0"                                 \
  93         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
  94                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
  95                 "setenv bootfile; setenv dnsip; "                       \
  96                 "setenv bootsource legacy; run ser\0"                   \
  97         "restore_env=run standard_env; saveenv; reset\0"                \
  98         "ser=setenv stdin serial; setenv stdout serial; "               \
  99                 "setenv stderr serial\0"                                \
 100         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 101         "stdin=serial\0"                                                \
 102         "stdout=serial\0"                                               \
 103         "stderr=serial\0"
 104
 105 /*
 106  * Ethernet Driver configuration
 107  */
 108 #ifdef CONFIG_CMD_NET
 109 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 110 #define CONFIG_PHY_BASE_ADR             7
 111 #undef CONFIG_RESET_PHY_R
 112 #endif /* CONFIG_CMD_NET */
 113
 114 #ifdef CONFIG_SATA
 115 #define CONFIG_SYS_SATA_MAX_DEVICE 1
 116 #define CONFIG_SYS_64BIT_LBA
 117 #define CONFIG_LBA48
 118 #endif
 119
 120 #endif /* _CONFIG_LSXL_H */