configs/socfpga_secu1_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_SOCFPGA=y
   3 CONFIG_SYS_MALLOC_LEN=0x4000000
   4 CONFIG_SYS_MALLOC_F_LEN=0x800
   5 CONFIG_ENV_SIZE=0x1000
   6 CONFIG_ENV_OFFSET=0x100000
   7 CONFIG_DM_GPIO=y
   8 CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_secu1"
   9 CONFIG_SPL_TEXT_BASE=0xFFFF0000
  10 # CONFIG_SPL_MMC is not set
  11 CONFIG_SPL_DRIVERS_MISC=y
  12 CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
  13 CONFIG_ENV_OFFSET_REDUND=0x120000
  14 # CONFIG_SPL_LIBDISK_SUPPORT is not set
  15 # CONFIG_SPL_SPI is not set
  16 CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
  17 CONFIG_DISTRO_DEFAULTS=y
  18 CONFIG_SYS_LOAD_ADDR=0x02000000
  19 CONFIG_FIT=y
  20 CONFIG_USE_BOOTARGS=y
  21 CONFIG_BOOTARGS="console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id=\"idq,regbank\""
  22 CONFIG_BOOTCOMMAND="setenv bootcmd 'bridge enable; if test ${bootnum} = 'b'; then run _fpga_loadsafe; else if test ${bootcount} -eq 4; then echo 'Switching copy...'; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; run _fpga_loaduser; fi;echo 'Booting bank $bootnum' && run userload && run userboot;' && setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && saveenv && saveenv && boot;"
  23 CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb"
  24 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  25 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
  26 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
  27 # CONFIG_DISPLAY_BOARDINFO is not set
  28 CONFIG_DISPLAY_BOARDINFO_LATE=y
  29 CONFIG_MISC_INIT_R=y
  30 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
  31 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
  32 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
  33 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set
  34 CONFIG_SPL_MTD_SUPPORT=y
  35 CONFIG_CMD_ASKENV=y
  36 CONFIG_CMD_GREPENV=y
  37 CONFIG_CMD_EEPROM=y
  38 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
  39 CONFIG_SYS_EEPROM_SIZE=1024
  40 # CONFIG_CMD_FLASH is not set
  41 CONFIG_CMD_GPIO=y
  42 CONFIG_CMD_I2C=y
  43 CONFIG_CMD_MMC=y
  44 CONFIG_CMD_NAND_TRIMFFS=y
  45 CONFIG_CMD_SPI=y
  46 CONFIG_CMD_WDT=y
  47 CONFIG_CMD_CACHE=y
  48 CONFIG_MTDIDS_DEFAULT="nand0=denali-nand"
  49 CONFIG_MTDPARTS_DEFAULT="mtdparts=denali-nand:512k(nand.4spl),512k(nand.uboot),128k(nand.env1),128k(nand.env2),0x1000000(nand.rec),0x3ee40000(nand.ubi),0x80000@0x3ff80000(nand.bbt)"
  50 CONFIG_CMD_UBI=y
  51 # CONFIG_CMD_UBIFS is not set
  52 # CONFIG_ISO_PARTITION is not set
  53 # CONFIG_EFI_PARTITION is not set
  54 CONFIG_ENV_OVERWRITE=y
  55 CONFIG_ENV_IS_IN_NAND=y
  56 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  57 CONFIG_VERSION_VARIABLE=y
  58 CONFIG_SPL_DM_SEQ_ALIAS=y
  59 # CONFIG_SPL_BLK is not set
  60 CONFIG_BOOTCOUNT_LIMIT=y
  61 CONFIG_DM_BOOTCOUNT=y
  62 CONFIG_DM_BOOTCOUNT_RTC=y
  63 CONFIG_DWAPB_GPIO=y
  64 CONFIG_DM_I2C=y
  65 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  66 CONFIG_DM_I2C_GPIO=y
  67 CONFIG_MISC=y
  68 CONFIG_I2C_EEPROM=y
  69 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
  70 CONFIG_MMC_DW=y
  71 CONFIG_MTD=y
  72 CONFIG_DM_MTD=y
  73 CONFIG_MTD_RAW_NAND=y
  74 CONFIG_SYS_NAND_USE_FLASH_BBT=y
  75 CONFIG_NAND_DENALI_DT=y
  76 CONFIG_SYS_NAND_ONFI_DETECTION=y
  77 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
  78 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
  79 CONFIG_SPL_NAND_DENALI=y
  80 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=2
  81 # CONFIG_DM_SPI_FLASH is not set
  82 CONFIG_MTD_UBI_FASTMAP=y
  83 CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
  84 CONFIG_MV88E6352_SWITCH=y
  85 CONFIG_PHY_FIXED=y
  86 CONFIG_DM_ETH=y
  87 CONFIG_PHY_GIGE=y
  88 CONFIG_ETH_DESIGNWARE=y
  89 CONFIG_MII=y
  90 CONFIG_DM_RESET=y
  91 CONFIG_DM_RTC=y
  92 CONFIG_RTC_M41T62=y
  93 CONFIG_SPI=y
  94 CONFIG_SPI_MEM=y
  95 CONFIG_DESIGNWARE_SPI=y
  96 CONFIG_DESIGNWARE_WATCHDOG=y
  97 CONFIG_WDT=y
  98 # CONFIG_GZIP is not set