configs/omap3_beagle_defconfig

   1 CONFIG_ARM=y
   2 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
   3 # CONFIG_SPL_USE_ARCH_MEMSET is not set
   4 CONFIG_ARCH_OMAP2PLUS=y
   5 CONFIG_SYS_MALLOC_F_LEN=0x4000
   6 CONFIG_NR_DRAM_BANKS=2
   7 CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
   8 CONFIG_SPL_TEXT_BASE=0x40200000
   9 CONFIG_TARGET_OMAP3_BEAGLE=y
  10 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
  11 CONFIG_SPL=y
  12 CONFIG_DISTRO_DEFAULTS=y
  13 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
  14 CONFIG_USE_PREBOOT=y
  15 CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
  16 CONFIG_SYS_CONSOLE_INFO_QUIET=y
  17 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  18 CONFIG_SPL_SEPARATE_BSS=y
  19 # CONFIG_SPL_FS_EXT4 is not set
  20 CONFIG_SPL_MTD_SUPPORT=y
  21 CONFIG_SPL_NAND_DRIVERS=y
  22 CONFIG_SPL_NAND_ECC=y
  23 CONFIG_SPL_NAND_SIMPLE=y
  24 CONFIG_SPL_NAND_BASE=y
  25 CONFIG_SYS_PROMPT="BeagleBoard # "
  26 CONFIG_CMD_SPL=y
  27 CONFIG_CMD_SPL_NAND_OFS=0x280000
  28 CONFIG_CMD_SPL_WRITE_SIZE=0x20000
  29 CONFIG_CMD_ASKENV=y
  30 # CONFIG_CMD_FLASH is not set
  31 CONFIG_CMD_GPIO=y
  32 CONFIG_CMD_I2C=y
  33 CONFIG_CMD_MMC=y
  34 CONFIG_CMD_NAND=y
  35 CONFIG_CMD_NAND_TRIMFFS=y
  36 CONFIG_CMD_SPI=y
  37 CONFIG_CMD_USB=y
  38 CONFIG_CMD_CACHE=y
  39 CONFIG_CMD_EXT4_WRITE=y
  40 CONFIG_CMD_FS_UUID=y
  41 CONFIG_CMD_MTDPARTS=y
  42 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
  43 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
  44 CONFIG_CMD_UBI=y
  45 # CONFIG_ISO_PARTITION is not set
  46 # CONFIG_SPL_EFI_PARTITION is not set
  47 CONFIG_SPL_PARTITION_UUIDS=y
  48 CONFIG_OF_CONTROL=y
  49 CONFIG_SPL_OF_CONTROL=y
  50 CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
  51 CONFIG_ENV_OVERWRITE=y
  52 CONFIG_ENV_IS_IN_NAND=y
  53 CONFIG_VERSION_VARIABLE=y
  54 CONFIG_SPL_DM=y
  55 CONFIG_SPL_DM_SEQ_ALIAS=y
  56 CONFIG_SPL_OF_TRANSLATE=y
  57 CONFIG_USB_FUNCTION_FASTBOOT=y
  58 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
  59 CONFIG_SYS_I2C_LEGACY=y
  60 CONFIG_SPL_SYS_I2C_LEGACY=y
  61 CONFIG_LED_STATUS=y
  62 CONFIG_LED_STATUS0=y
  63 CONFIG_LED_STATUS_BIT=1
  64 CONFIG_LED_STATUS_STATE=2
  65 CONFIG_LED_STATUS1=y
  66 CONFIG_LED_STATUS_BIT1=2
  67 CONFIG_LED_STATUS_STATE1=2
  68 CONFIG_LED_STATUS_BOOT_ENABLE=y
  69 CONFIG_LED_STATUS_BOOT=1
  70 CONFIG_LED_STATUS_GREEN_ENABLE=y
  71 CONFIG_LED_STATUS_GREEN=2
  72 CONFIG_LED_STATUS_CMD=y
  73 CONFIG_TWL4030_LED=y
  74 CONFIG_MMC_OMAP_HS=y
  75 CONFIG_MTD=y
  76 CONFIG_MTD_RAW_NAND=y
  77 CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
  78 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
  79 CONFIG_SYS_NAND_PAGE_COUNT=0x40
  80 CONFIG_SYS_NAND_PAGE_SIZE=0x800
  81 CONFIG_SYS_NAND_OOBSIZE=0x40
  82 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
  83 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
  84 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
  85 CONFIG_DM_ETH=y
  86 CONFIG_SPI=y
  87 CONFIG_DM_SPI=y
  88 CONFIG_OMAP3_SPI=y
  89 CONFIG_USB=y
  90 # CONFIG_SPL_DM_USB is not set
  91 CONFIG_USB_EHCI_HCD=y
  92 CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y
  93 CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=147
  94 CONFIG_USB_OMAP3=y
  95 CONFIG_USB_MUSB_GADGET=y
  96 CONFIG_USB_MUSB_OMAP2PLUS=y
  97 CONFIG_TWL4030_USB=y
  98 CONFIG_USB_HOST_ETHER=y
  99 CONFIG_USB_ETHER_ASIX=y
 100 CONFIG_USB_ETHER_MCS7830=y
 101 CONFIG_USB_ETHER_SMSC95XX=y
 102 CONFIG_USB_GADGET=y
 103 CONFIG_USB_GADGET_MANUFACTURER="TI"
 104 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 105 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
 106 CONFIG_USB_ETHER=y
 107 CONFIG_VIDEO_OMAP3=y
 108 CONFIG_BCH=y