Merge tag 'xilinx-for-v2022.07-rc1-v2' of https://source.denx.de/u-boot/custodians...
[platform/kernel/u-boot.git] / configs / smartweb_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
3 CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
4 CONFIG_SPL_SYS_ICACHE_OFF=y
5 CONFIG_SPL_SYS_DCACHE_OFF=y
6 CONFIG_SPL_SYS_THUMB_BUILD=y
7 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
8 # CONFIG_SPL_USE_ARCH_MEMSET is not set
9 CONFIG_ARCH_AT91=y
10 CONFIG_SYS_TEXT_BASE=0x23000000
11 CONFIG_SYS_MALLOC_LEN=0x460000
12 CONFIG_SYS_MALLOC_F_LEN=0x2000
13 CONFIG_TARGET_SMARTWEB=y
14 CONFIG_AT91_GPIO_PULLUP=y
15 CONFIG_ATMEL_LEGACY=y
16 CONFIG_SPL_GPIO=y
17 CONFIG_SPL_LIBCOMMON_SUPPORT=y
18 CONFIG_SPL_LIBGENERIC_SUPPORT=y
19 CONFIG_NR_DRAM_BANKS=1
20 CONFIG_ENV_OFFSET=0x100000
21 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
22 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
23 CONFIG_SPL=y
24 CONFIG_ENV_OFFSET_REDUND=0x180000
25 CONFIG_SYS_LOAD_ADDR=0x22000000
26 CONFIG_FIT=y
27 CONFIG_NAND_BOOT=y
28 CONFIG_BOOTDELAY=3
29 CONFIG_AUTOBOOT_KEYED=y
30 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
31 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
32 CONFIG_USE_BOOTCOMMAND=y
33 CONFIG_BOOTCOMMAND="run flashboot"
34 # CONFIG_DISPLAY_BOARDINFO is not set
35 CONFIG_BOARD_EARLY_INIT_F=y
36 CONFIG_SPL_NAND_SUPPORT=y
37 CONFIG_SPL_NAND_DRIVERS=y
38 CONFIG_SPL_NAND_ECC=y
39 CONFIG_SPL_NAND_BASE=y
40 CONFIG_HUSH_PARSER=y
41 CONFIG_SYS_PROMPT="U-Boot# "
42 # CONFIG_CMD_IMI is not set
43 CONFIG_CMD_DFU=y
44 # CONFIG_CMD_LOADS is not set
45 CONFIG_CMD_NAND=y
46 # CONFIG_CMD_SOURCE is not set
47 CONFIG_CMD_DHCP=y
48 CONFIG_BOOTP_BOOTFILESIZE=y
49 CONFIG_CMD_PING=y
50 CONFIG_CMD_FAT=y
51 CONFIG_CMD_MTDPARTS=y
52 CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
53 CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:128k(Bootstrap),896k(U-Boot),512k(ENV0),512k(ENV1),4M(Linux),-(Root-FS)"
54 # CONFIG_DOS_PARTITION is not set
55 CONFIG_OF_CONTROL=y
56 CONFIG_OF_EMBED=y
57 CONFIG_ENV_OVERWRITE=y
58 CONFIG_ENV_IS_IN_NAND=y
59 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
60 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
61 CONFIG_NET_RETRY_COUNT=20
62 CONFIG_CLK=y
63 CONFIG_CLK_AT91=y
64 CONFIG_DFU_NAND=y
65 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
66 CONFIG_AT91_GPIO=y
67 # CONFIG_MMC is not set
68 CONFIG_MTD=y
69 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
70 CONFIG_NAND_ATMEL=y
71 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
72 CONFIG_SYS_NAND_PAGE_COUNT=0x40
73 CONFIG_SYS_NAND_PAGE_SIZE=0x800
74 CONFIG_SYS_NAND_OOBSIZE=0x40
75 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
76 CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
77 CONFIG_MACB=y
78 CONFIG_RMII=y
79 CONFIG_ATMEL_USART=y
80 CONFIG_USB=y
81 CONFIG_USB_GADGET=y
82 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
83 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
84 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
85 CONFIG_USB_GADGET_DOWNLOAD=y
86 CONFIG_WDT=y
87 CONFIG_WDT_AT91=y
88 CONFIG_SPL_TINY_MEMSET=y