Makefile.in

   1 # Nettle Makefile
   2
   3 @SET_MAKE@
   4
   5 srcdir = @srcdir@
   6 VPATH = @srcdir@
   7
   8 LIBOBJS = @LIBOBJS@
   9
  10 INSTALL = @INSTALL@
  11 INSTALL_DATA = @INSTALL_DATA@
  12 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  13 INSTALL_SCRIPT = @INSTALL_SCRIPT@
  14 INSTALL_STRIP_PROGRAM = $(INSTALL_PROGRAM) -s
  15 MKDIR_P = @MKDIR_P@
  16
  17 SUBDIRS = tools testsuite examples
  18
  19 include config.make
  20
  21 PRE_CPPFLAGS = -I.
  22 # FIXME: Add configuration of LIBEXT?
  23 LIBTARGETS = libnettle.a @IF_HOGWEED@ libhogweed.a
  24 SHLIBTARGETS = $(LIBNETTLE_FORLINK) @IF_HOGWEED@ $(LIBHOGWEED_FORLINK)
  25
  26 TARGETS = aesdata$(EXEEXT) desdata$(EXEEXT) shadata$(EXEEXT) gcmdata$(EXEEXT)\
  27           $(LIBTARGETS) @IF_SHARED@ $(SHLIBTARGETS)
  28
  29 DOCTARGETS = nettle.info nettle.html nettle.pdf
  30
  31 PKGCONFIG_FILES = nettle.pc @IF_HOGWEED@ hogweed.pc
  32 pkgconfigdir = $(libdir)/pkgconfig
  33
  34 all check install uninstall:
  35         $(MAKE) $@-here
  36         set -e; for d in $(SUBDIRS); do \
  37           echo "Making $@ in $$d" ; (cd $$d && $(MAKE) $@); done
  38
  39 clean distclean mostlyclean maintainer-clean tags:
  40         set -e; for d in $(SUBDIRS); do \
  41           echo "Making $@ in $$d" ; (cd $$d && $(MAKE) $@); done
  42         $(MAKE) $@-here
  43
  44 check-here:
  45         true
  46
  47 # FIXME: Remove. These targets aren't supported, but they are expected by the
  48 # automake generated Makefiles in the lsh build.
  49 dvi installcheck uninstallcheck:
  50         true
  51
  52 all-here: $(TARGETS) $(DOCTARGETS)
  53
  54 nettle_SOURCES = aes-decrypt-internal.c aes-decrypt.c \
  55                  aes-encrypt-internal.c aes-encrypt.c aes-encrypt-table.c \
  56                  aes-set-encrypt-key.c aes-set-decrypt-key.c aes-meta.c \
  57                  arcfour.c arcfour-crypt.c arcfour-meta.c \
  58                  arctwo.c arctwo-meta.c \
  59                  base16-encode.c base16-decode.c base16-meta.c \
  60                  base64-encode.c base64-decode.c base64-meta.c \
  61                  camellia-crypt.c camellia-crypt-internal.c \
  62                  camellia-set-encrypt-key.c camellia-set-decrypt-key.c \
  63                  camellia-table.c camellia-meta.c \
  64                  cast128.c cast128-meta.c \
  65                  blowfish.c \
  66                  cbc.c ctr.c gcm.c gcm-aes.c \
  67                  des.c \
  68                  des3.c des-compat.c \
  69                  hmac.c hmac-md5.c hmac-ripemd160.c hmac-sha1.c \
  70                  hmac-sha224.c hmac-sha256.c hmac-sha384.c hmac-sha512.c \
  71                  knuth-lfib.c \
  72                  md2.c md2-meta.c md4.c md4-meta.c \
  73                  md5.c md5-compress.c md5-compat.c md5-meta.c \
  74                  ripemd160.c ripemd160-compress.c ripemd160-meta.c \
  75                  sha1.c sha1-compress.c sha1-meta.c \
  76                  sha256.c sha256-compress.c sha224-meta.c sha256-meta.c \
  77                  sha512.c sha512-compress.c sha384-meta.c sha512-meta.c \
  78                  serpent-set-key.c serpent-encrypt.c serpent-decrypt.c \
  79                  serpent-meta.c \
  80                  twofish.c twofish-meta.c \
  81                  yarrow256.c yarrow_key_event.c \
  82                  buffer.c buffer-init.c realloc.c \
  83                  nettle-meta-hashes.c nettle-meta-ciphers.c \
  84                  nettle-meta-armors.c \
  85                  nettle-internal.c write-be32.c write-le32.c
  86
  87 hogweed_SOURCES = sexp.c sexp-format.c \
  88                   sexp-transport.c sexp-transport-format.c \
  89                   bignum.c bignum-next-prime.c \
  90                   bignum-random.c bignum-random-prime.c \
  91                   sexp2bignum.c \
  92                   pkcs1.c pkcs1-rsa-md5.c pkcs1-rsa-sha1.c \
  93                   pkcs1-rsa-sha256.c pkcs1-rsa-sha512.c \
  94                   rsa.c rsa-sign.c rsa-verify.c \
  95                   rsa-md5-sign.c rsa-md5-verify.c \
  96                   rsa-sha1-sign.c rsa-sha1-verify.c \
  97                   rsa-sha256-sign.c rsa-sha256-verify.c \
  98                   rsa-sha512-sign.c rsa-sha512-verify.c \
  99                   rsa-encrypt.c rsa-decrypt.c \
 100                   rsa-keygen.c rsa-compat.c \
 101                   rsa2sexp.c sexp2rsa.c \
 102                   dsa.c dsa-sign.c dsa-verify.c dsa-keygen.c \
 103                   dsa-sha1-sign.c dsa-sha1-verify.c \
 104                   dsa-sha256-sign.c dsa-sha256-verify.c  \
 105                   dsa2sexp.c sexp2dsa.c \
 106                   pgp-encode.c rsa2openpgp.c \
 107                   der-iterator.c der2rsa.c der2dsa.c
 108
 109 HEADERS = aes.h arcfour.h arctwo.h asn1.h bignum.h blowfish.h \
 110           base16.h base64.h buffer.h camellia.h cast128.h \
 111           cbc.h ctr.h gcm.h \
 112           des.h des-compat.h dsa.h \
 113           hmac.h \
 114           knuth-lfib.h \
 115           macros.h \
 116           md2.h md4.h \
 117           md5.h md5-compat.h \
 118           memxor.h \
 119           nettle-meta.h nettle-types.h \
 120           pgp.h pkcs1.h realloc.h ripemd160.h rsa.h rsa-compat.h \
 121           sexp.h \
 122           serpent.h sha.h twofish.h \
 123           yarrow.h
 124
 125 INSTALL_HEADERS = $(HEADERS) nettle-stdint.h
 126
 127 SOURCES = $(nettle_SOURCES) $(hogweed_SOURCES) aesdata.c desdata.c shadata.c gcmdata.c
 128
 129 DISTFILES = $(SOURCES) $(HEADERS) .bootstrap aclocal.m4 configure.ac \
 130         configure stamp-h.in \
 131         config.guess config.sub install-sh texinfo.tex \
 132         config.h.in config.m4.in config.make.in Makefile.in \
 133         README AUTHORS COPYING.LIB INSTALL NEWS TODO ChangeLog \
 134         nettle.pc.in hogweed.pc.in \
 135         memxor.c $(des_headers) descore.README \
 136         aes-internal.h camellia-internal.h serpent-internal.h \
 137         cast128_sboxes.h desinfo.h desCode.h \
 138         nettle-internal.h nettle-write.h prime-list.h \
 139         asm.m4 \
 140         nettle.texinfo nettle.info nettle.html nettle.pdf sha-example.c
 141
 142 # Rules building static libraries
 143 nettle_OBJS = $(nettle_SOURCES:.c=.$(OBJEXT)) $(LIBOBJS)
 144 nettle_PURE_OBJS = $(nettle_OBJS:.$(OBJEXT)=.p$(OBJEXT))
 145
 146 hogweed_OBJS = $(hogweed_SOURCES:.c=.$(OBJEXT))
 147 hogweed_PURE_OBJS = $(hogweed_OBJS:.$(OBJEXT)=.p$(OBJEXT))
 148
 149 libnettle.a: $(nettle_OBJS)
 150         -rm -f $@
 151         $(AR) $(ARFLAGS) $@ $(nettle_OBJS)
 152         $(RANLIB) $@
 153
 154 libhogweed.a: $(hogweed_OBJS)
 155         -rm -f $@
 156         $(AR) $(ARFLAGS) $@ $(hogweed_OBJS)
 157         $(RANLIB) $@
 158
 159 .c.$(OBJEXT):
 160         $(COMPILE) $(CCPIC_MAYBE) -c $< \
 161         && $(DEP_PROCESS)
 162
 163 # Rules building shared libraries
 164 $(LIBNETTLE_FORLINK): $(nettle_PURE_OBJS)
 165         $(LIBNETTLE_LINK) $(nettle_PURE_OBJS) -o $@ $(LIBNETTLE_LIBS)
 166         -mkdir .lib 2>/dev/null
 167         [ -z "$(LIBNETTLE_SONAME)" ] || (cd .lib \
 168           && ln -sf ../$(LIBNETTLE_FORLINK) $(LIBNETTLE_SONAME))
 169
 170 $(LIBHOGWEED_FORLINK): $(hogweed_PURE_OBJS) $(LIBNETTLE_FORLINK)
 171         $(LIBHOGWEED_LINK) $(hogweed_PURE_OBJS) -o $@ $(LIBHOGWEED_LIBS)
 172         -mkdir .lib 2>/dev/null
 173         [ -z "$(LIBHOGWEED_SONAME)" ] || (cd .lib \
 174           && ln -sf ../$(LIBHOGWEED_FORLINK) $(LIBHOGWEED_SONAME))
 175
 176 .c.p$(OBJEXT):
 177         $(COMPILE) $(SHLIBCFLAGS) -c $< -o $@ \
 178         && $(DEP_PROCESS)
 179
 180 # For Solaris and BSD make, we have to use an explicit rule for each executable
 181 aesdata$(EXEEXT): aesdata.$(OBJEXT)
 182         $(LINK) aesdata.$(OBJEXT) $(LIBS) -o aesdata$(EXEEXT)
 183
 184 desdata$(EXEEXT): desdata.$(OBJEXT)
 185         $(LINK) desdata.$(OBJEXT) $(LIBS) -o desdata$(EXEEXT)
 186
 187 shadata$(EXEEXT): shadata.$(OBJEXT)
 188         $(LINK) shadata.$(OBJEXT) $(LIBS) -lm -o shadata$(EXEEXT)
 189
 190 gcmdata$(EXEEXT): gcmdata.$(OBJEXT)
 191         $(LINK) gcmdata.$(OBJEXT) $(LIBS) -o gcmdata$(EXEEXT)
 192
 193 # .$(OBJEXT)$(EXEEXT):
 194 #       $(LINK) $< $(LIBS) -o $@
 195
 196 # desCore rules
 197 # It seems using $(srcdir)/ doesn't work with GNU make 3.79.1
 198 # des_headers = $(srcdir)/rotors.h $(srcdir)/keymap.h
 199 des_headers = rotors.h keymap.h
 200
 201 # Generate DES headers.
 202 $(des_headers): desdata.c
 203         $(MAKE) desdata$(EXEEXT)
 204         f="$(srcdir)/`basename $@`"; \
 205           ./desdata$(EXEEXT) $(@F) > $${f}T; \
 206           test -s $${f}T && mv -f $${f}T $$f
 207
 208 des.$(OBJEXT): des.c des.h $(des_headers)
 209
 210 .asm.$(OBJEXT):
 211         $(M4) $(srcdir)/asm.m4 machine.m4 config.m4 \
 212                 $< >$*.s
 213         $(COMPILE) $(CCPIC_MAYBE) -c $*.s
 214         echo "$@ : $< $(srcdir)/asm.m4 machine.m4 config.m4" >$@.d
 215
 216 .asm.p$(OBJEXT):
 217         $(M4) $(srcdir)/asm.m4 machine.m4 config.m4 \
 218                 $< >$*.s
 219         $(COMPILE) $(SHLIBCFLAGS) -c $*.s -o $@
 220         echo "$@ : $< $(srcdir)/asm.m4 machine.m4 config.m4" >$@.d
 221
 222 # Texinfo rules
 223 .texinfo.info:
 224         cd $(srcdir) && $(MAKEINFO) --output $@ `basename "$<"`
 225
 226 .texinfo.html:
 227         cd $(srcdir) && $(MAKEINFO) --html --no-split \
 228           --output $@T `basename "$<"` \
 229           && test -s $@T && mv -f $@T $@
 230
 231 .texinfo.dvi:
 232         cd $(srcdir) && texi2dvi `basename "$<"`
 233
 234 .dvi.ps:
 235         cd $(srcdir) && dvips -Ppdf -G0 -o `basename "$<" .dvi`.ps `basename "$<"`
 236
 237 # Avoid rebuilding .dvi and .ps files when the .texinfo source is unchanged.
 238 PS2PDFFLAGS=-dCompatibilityLevel=1.3 -dMAxSubsetPct=100 -dSubsetFonts=true -dEmbedAllFonts=true
 239 .texinfo.pdf:
 240         $(MAKE) `basename "$<" .texinfo`.ps
 241         cd $(srcdir) && ps2pdf $(PS2PDFFLAGS) `basename "$<" .texinfo`.ps
 242
 243 # Configure-related rules, mostly copied from the autoconf manual. No
 244 # $(srcdir) prefixes on the targets, though.
 245
 246 configure: configure.ac aclocal.m4
 247         cd $(srcdir) && $(AUTOCONF)
 248
 249 # autoheader might not change config.h.in, so touch a stamp file.
 250 config.h.in: stamp-h.in
 251 stamp-h.in: configure.ac aclocal.m4
 252         cd $(srcdir) && $(AUTOHEADER)
 253         echo timestamp > $(srcdir)/stamp-h.in
 254
 255 config.status: configure
 256         ./config.status --recheck
 257
 258 config.h: stamp-h
 259 stamp-h: config.h.in config.status
 260         ./config.status config.h
 261         echo timestamp > stamp-h
 262
 263 Makefile: Makefile.in config.status
 264         ./config.status $@
 265
 266 config.make: config.make.in config.status
 267         ./config.status $@
 268
 269 config.m4: config.m4.in config.status
 270         ./config.status $@
 271
 272 nettle.pc: nettle.pc.in config.status
 273         ./config.status $@
 274
 275 hogweed.pc: hogweed.pc.in config.status
 276         ./config.status $@
 277
 278 # Installation
 279 install-here: install-info install-headers install-static install-pkgconfig \
 280         @IF_SHARED@ install-shared-nettle @IF_HOGWEED@ install-shared-hogweed
 281
 282 install-static: $(LIBTARGETS)
 283         $(MKDIR_P) $(DESTDIR)$(libdir)
 284         for f in $(LIBTARGETS); do \
 285           $(INSTALL_DATA) $$f $(DESTDIR)$(libdir) ; \
 286         done
 287
 288 install-shared-nettle: $(LIBNETTLE_FORLINK)
 289         $(MKDIR_P) $(DESTDIR)$(libdir)
 290         $(INSTALL_DATA) $(LIBNETTLE_FORLINK) $(DESTDIR)$(libdir)/$(LIBNETTLE_FILE)
 291         [ -z "$(LIBNETTLE_SONAME)" ] \
 292                 || (cd $(DESTDIR)$(libdir) \
 293                 && ln -sf $(LIBNETTLE_FILE) $(LIBNETTLE_SONAME) \
 294                 && ln -sf $(LIBNETTLE_FILE) $(LIBNETTLE_FORLINK))
 295
 296 install-shared-hogweed: $(LIBHOGWEED_FORLINK)
 297         $(MKDIR_P) $(DESTDIR)$(libdir)
 298         $(INSTALL_DATA) $(LIBHOGWEED_FORLINK) $(DESTDIR)$(libdir)/$(LIBHOGWEED_FILE)
 299         [ -z "$(LIBHOGWEED_SONAME)" ] \
 300                 || (cd $(DESTDIR)$(libdir) \
 301                 && ln -sf $(LIBHOGWEED_FILE) $(LIBHOGWEED_SONAME) \
 302                 && ln -sf $(LIBHOGWEED_FILE) $(LIBHOGWEED_FORLINK))
 303
 304 # I'd like to use makes VPATH search to locate the files to be
 305 # installed. But it seems most make programs don't set $<, $^, $? and
 306 # friends for ordinary explicit rules.
 307
 308 install-info: nettle.info
 309         $(MKDIR_P) $(DESTDIR)$(infodir)
 310         f=nettle.info ; \
 311         [ -f $$f ] || f="$(srcdir)/$$f" ; \
 312         $(INSTALL_DATA) "$$f" $(DESTDIR)$(infodir) ; \
 313         if (install-info --version && \
 314             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 315           install-info --info-dir="$(DESTDIR)$(infodir)" "$$f" ; \
 316         else : ; fi
 317
 318 # NOTE: I'd like to use $^, but that's a GNU extension. $? should be
 319 # more portable, and equivalent for phony targets.
 320 install-headers: $(INSTALL_HEADERS)
 321         $(MKDIR_P) $(DESTDIR)$(includedir)/nettle
 322         for f in $(INSTALL_HEADERS) ; do \
 323           if [ -f "$$f" ] ; then \
 324             $(INSTALL_DATA) "$$f" $(DESTDIR)$(includedir)/nettle ; \
 325           else \
 326             $(INSTALL_DATA) "$(srcdir)/$$f" $(DESTDIR)$(includedir)/nettle ; \
 327           fi ; done
 328
 329 install-pkgconfig: $(PKGCONFIG_FILES)
 330         $(MKDIR_P) $(DESTDIR)$(pkgconfigdir)
 331         for f in $(PKGCONFIG_FILES) ; do \
 332           $(INSTALL_DATA) "$$f" $(DESTDIR)$(pkgconfigdir) ; \
 333         done
 334
 335 # Uninstall
 336 uninstall-here: uninstall-info uninstall-headers uninstall-static \
 337                 uninstall-pkgconfig @IF_SHARED@ uninstall-shared
 338
 339 uninstall-static:
 340         for f in $(LIBTARGETS) ; do \
 341           rm -f $(DESTDIR)$(libdir)/$$f ; \
 342         done
 343
 344 uninstall-headers:
 345         for f in $(INSTALL_HEADERS) ; do \
 346           rm -f $(DESTDIR)$(includedir)/nettle/$$f ; \
 347         done
 348
 349 uninstall-info:
 350         if (install-info --version && \
 351             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 352           install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)"/nettle.info ; \
 353         else : ; fi
 354         -rm -f $(DESTDIR)$(infodir)/nettle.info
 355
 356 # FIXME: Leaves the links around
 357 uninstall-shared: uninstall-shared-nettle @IF_HOGWEED@ uninstall-shared-hogweed
 358
 359 uninstall-shared-nettle:
 360         rm -f $(DESTDIR)$(libdir)/$(LIBNETTLE_FILE)
 361         [ -z "$(LIBNETTLE_SONAME)" ] \
 362                 || rm -f $(LIBNETTLE_SONAME) $(LIBNETTLE_FORLINK)
 363
 364 uninstall-shared-hogweed:
 365         rm -f $(DESTDIR)$(libdir)/$(LIBHOGWEED_FILE)
 366         [ -z "$(LIBHOGWEED_SONAME)" ] \
 367                 || rm -f $(LIBHOGWEED_SONAME) $(LIBHOGWEED_FORLINK)
 368
 369 uninstall-pkgconfig:
 370         for f in $(PKGCONFIG_FILES) ; do \
 371           rm -f $(DESTDIR)$(pkgconfigdir)/$$f ; \
 372         done
 373
 374 # Distribution
 375 distdir = $(PACKAGE_NAME)-$(PACKAGE_VERSION)
 376 top_distdir = $(distdir)
 377
 378 # NOTE: We should handle both absolute and relative $destdir.
 379
 380 distdir: $(DISTFILES)
 381         rm -rf "$(distdir)"
 382         mkdir "$(distdir)"
 383         set -e; for f in $(DISTFILES) ; do \
 384           if [ -f "$$f" ] ; then cp "$$f" "$(distdir)" ; \
 385           else cp "$(srcdir)/$$f" "$(distdir)" ; \
 386           fi ; \
 387         done
 388         set -e; for d in sparc32 sparc64 x86 x86_64; do \
 389           mkdir "$(distdir)/$$d" ; \
 390           cp $(srcdir)/$$d/*.asm $(srcdir)/$$d/*.m4 "$(distdir)/$$d" ; \
 391         done
 392         set -e; for d in $(SUBDIRS); do \
 393           sd="$(distdir)/$$d" ; \
 394           mkdir "$$sd" && $(MAKE) -C $$d distdir="`cd $$sd && pwd`" $@ ; \
 395         done
 396
 397 dist: distdir
 398         tar cf - $(distdir) | gzip -c >$(distdir).tar.gz
 399         rm -rf $(distdir)
 400
 401 rm_distcheck = test ! -d distcheck-tmp \
 402             || { find distcheck-tmp -type d ! -perm -200 -exec chmod u+w {} ';' \
 403                  && rm -fr distcheck-tmp; };
 404
 405 distcheck: dist
 406         $(rm_distcheck)
 407         mkdir distcheck-tmp
 408         gzip -d < $(distdir).tar.gz \
 409           | { cd distcheck-tmp && tar xf - && chmod -R a-w $(distdir) ; }
 410         mkdir distcheck-tmp/build
 411         mkdir distcheck-tmp/install
 412         cd distcheck-tmp/build && ../$(distdir)/configure --prefix="`cd ../install && pwd`"
 413         cd distcheck-tmp/build && $(MAKE)
 414         cd distcheck-tmp/build && $(MAKE) check
 415         cd distcheck-tmp/build && $(MAKE) install
 416         cd distcheck-tmp/build && $(MAKE) uninstall
 417         cd distcheck-tmp && find install -type f -print > leftover-install-files
 418         @test `cat distcheck-tmp/leftover-install-files | wc -l` -le 1  \
 419           || { echo "ERROR: files left after uninstall:" ; \
 420                cat distcheck-tmp/leftover-install-files ; \
 421                exit 1; }
 422         chmod -R a-w distcheck-tmp/install
 423         mkdir distcheck-tmp/destdir
 424         destdir="`cd distcheck-tmp/destdir && pwd`" \
 425           && cd distcheck-tmp/build \
 426           && $(MAKE) install DESTDIR="$$destdir" \
 427           && $(MAKE) uninstall DESTDIR="$$destdir"
 428         cd distcheck-tmp && find destdir -type f -print > leftover-destdir-files
 429         @test `cat distcheck-tmp/leftover-destdir-files | wc -l` -le 1  \
 430           || { echo "ERROR: destdir files left after uninstall:" ; \
 431                cat distcheck-tmp/leftover-destdir-files ; \
 432                exit 1; }
 433         cd distcheck-tmp/build && $(MAKE) dist
 434         cd distcheck-tmp/build && rm *.gz
 435         cd distcheck-tmp/build && $(MAKE) distclean
 436         cd distcheck-tmp && find build -type f -print > leftover-build-files
 437         @test `cat distcheck-tmp/leftover-build-files | wc -l` -eq 0  \
 438           || { echo "ERROR: files left in build directory after distclean:" ; \
 439                cat distcheck-tmp/leftover-build-files ; \
 440                exit 1; }
 441         $(rm_distcheck)
 442
 443 clean-here:
 444         -rm -f $(TARGETS) *.$(OBJEXT) *.p$(OBJEXT) *.s
 445         -rm -rf .lib
 446
 447 distclean-here: clean-here
 448         -rm -f config.h stamp-h config.log config.status machine.m4 \
 449         config.make config.m4 Makefile nettle-stdint.h \
 450         nettle.pc hogweed.pc \
 451         *.asm *.d
 452
 453 maintainer-clean-here:
 454         -rm -f $(DOCTARGETS) *.dvi *.ps
 455
 456 tags-here:
 457         etags -o $(srcdir)/TAGS $(srcdir)/*.c $(srcdir)/*.h
 458
 459 DEP_FILES = $(SOURCES:.c=.$(OBJEXT).d) $(SOURCES:.c=.p$(OBJEXT).d)
 460 @DEP_INCLUDE@ $(DEP_FILES)