Imported Upstream version 1.0.0
[platform/upstream/js.git] / js / src / jsdhash.h
1 /* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 /* ***** BEGIN LICENSE BLOCK *****
3  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
4  *
5  * The contents of this file are subject to the Mozilla Public License Version
6  * 1.1 (the "License"); you may not use this file except in compliance with
7  * the License. You may obtain a copy of the License at
8  * http://www.mozilla.org/MPL/
9  *
10  * Software distributed under the License is distributed on an "AS IS" basis,
11  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
12  * for the specific language governing rights and limitations under the
13  * License.
14  *
15  * The Original Code is Mozilla JavaScript code.
16  *
17  * The Initial Developer of the Original Code is
18  * Netscape Communications Corporation.
19  * Portions created by the Initial Developer are Copyright (C) 1999-2001
20  * the Initial Developer. All Rights Reserved.
21  *
22  * Contributor(s):
23  *   Brendan Eich <brendan@mozilla.org> (Original Author)
24  *
25  * Alternatively, the contents of this file may be used under the terms of
26  * either of the GNU General Public License Version 2 or later (the "GPL"),
27  * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
28  * in which case the provisions of the GPL or the LGPL are applicable instead
29  * of those above. If you wish to allow use of your version of this file only
30  * under the terms of either the GPL or the LGPL, and not to allow others to
31  * use your version of this file under the terms of the MPL, indicate your
32  * decision by deleting the provisions above and replace them with the notice
33  * and other provisions required by the GPL or the LGPL. If you do not delete
34  * the provisions above, a recipient may use your version of this file under
35  * the terms of any one of the MPL, the GPL or the LGPL.
36  *
37  * ***** END LICENSE BLOCK ***** */
38
39 #ifndef jsdhash_h___
40 #define jsdhash_h___
41 /*
42  * Double hashing, a la Knuth 6.
43  */
44 #include "jstypes.h"
45
46 JS_BEGIN_EXTERN_C
47
48 #if defined(__GNUC__) && defined(__i386__) && (__GNUC__ >= 3) && !defined(XP_OS2)
49 #define JS_DHASH_FASTCALL __attribute__ ((regparm (3),stdcall))
50 #elif defined(XP_WIN)
51 #define JS_DHASH_FASTCALL __fastcall
52 #else
53 #define JS_DHASH_FASTCALL
54 #endif
55
56 #ifdef DEBUG_XXXbrendan
57 #define JS_DHASHMETER 1
58 #endif
59
60 /* Table size limit, do not equal or exceed (see min&maxAlphaFrac, below). */
61 #undef JS_DHASH_SIZE_LIMIT
62 #define JS_DHASH_SIZE_LIMIT     JS_BIT(24)
63
64 /* Minimum table size, or gross entry count (net is at most .75 loaded). */
65 #ifndef JS_DHASH_MIN_SIZE
66 #define JS_DHASH_MIN_SIZE 16
67 #elif (JS_DHASH_MIN_SIZE & (JS_DHASH_MIN_SIZE - 1)) != 0
68 #error "JS_DHASH_MIN_SIZE must be a power of two!"
69 #endif
70
71 /*
72  * Multiplicative hash uses an unsigned 32 bit integer and the golden ratio,
73  * expressed as a fixed-point 32-bit fraction.
74  */
75 #define JS_DHASH_BITS           32
76 #define JS_DHASH_GOLDEN_RATIO   0x9E3779B9U
77
78 /* Primitive and forward-struct typedefs. */
79 typedef uint32                  JSDHashNumber;
80 typedef struct JSDHashEntryHdr  JSDHashEntryHdr;
81 typedef struct JSDHashEntryStub JSDHashEntryStub;
82 typedef struct JSDHashTable     JSDHashTable;
83 typedef struct JSDHashTableOps  JSDHashTableOps;
84
85 /*
86  * Table entry header structure.
87  *
88  * In order to allow in-line allocation of key and value, we do not declare
89  * either here.  Instead, the API uses const void *key as a formal parameter.
90  * The key need not be stored in the entry; it may be part of the value, but
91  * need not be stored at all.
92  *
93  * Callback types are defined below and grouped into the JSDHashTableOps
94  * structure, for single static initialization per hash table sub-type.
95  *
96  * Each hash table sub-type should nest the JSDHashEntryHdr structure at the
97  * front of its particular entry type.  The keyHash member contains the result
98  * of multiplying the hash code returned from the hashKey callback (see below)
99  * by JS_DHASH_GOLDEN_RATIO, then constraining the result to avoid the magic 0
100  * and 1 values.  The stored keyHash value is table size invariant, and it is
101  * maintained automatically by JS_DHashTableOperate -- users should never set
102  * it, and its only uses should be via the entry macros below.
103  *
104  * The JS_DHASH_ENTRY_IS_LIVE macro tests whether entry is neither free nor
105  * removed.  An entry may be either busy or free; if busy, it may be live or
106  * removed.  Consumers of this API should not access members of entries that
107  * are not live.
108  *
109  * However, use JS_DHASH_ENTRY_IS_BUSY for faster liveness testing of entries
110  * returned by JS_DHashTableOperate, as JS_DHashTableOperate never returns a
111  * non-live, busy (i.e., removed) entry pointer to its caller.  See below for
112  * more details on JS_DHashTableOperate's calling rules.
113  */
114 struct JSDHashEntryHdr {
115     JSDHashNumber       keyHash;        /* every entry must begin like this */
116 };
117
118 #define JS_DHASH_ENTRY_IS_FREE(entry)   ((entry)->keyHash == 0)
119 #define JS_DHASH_ENTRY_IS_BUSY(entry)   (!JS_DHASH_ENTRY_IS_FREE(entry))
120 #define JS_DHASH_ENTRY_IS_LIVE(entry)   ((entry)->keyHash >= 2)
121
122 /*
123  * A JSDHashTable is currently 8 words (without the JS_DHASHMETER overhead)
124  * on most architectures, and may be allocated on the stack or within another
125  * structure or class (see below for the Init and Finish functions to use).
126  *
127  * To decide whether to use double hashing vs. chaining, we need to develop a
128  * trade-off relation, as follows:
129  *
130  * Let alpha be the load factor, esize the entry size in words, count the
131  * entry count, and pow2 the power-of-two table size in entries.
132  *
133  *   (JSDHashTable overhead)    > (JSHashTable overhead)
134  *   (unused table entry space) > (malloc and .next overhead per entry) +
135  *                                (buckets overhead)
136  *   (1 - alpha) * esize * pow2 > 2 * count + pow2
137  *
138  * Notice that alpha is by definition (count / pow2):
139  *
140  *   (1 - alpha) * esize * pow2 > 2 * alpha * pow2 + pow2
141  *   (1 - alpha) * esize        > 2 * alpha + 1
142  *
143  *   esize > (1 + 2 * alpha) / (1 - alpha)
144  *
145  * This assumes both tables must keep keyHash, key, and value for each entry,
146  * where key and value point to separately allocated strings or structures.
147  * If key and value can be combined into one pointer, then the trade-off is:
148  *
149  *   esize > (1 + 3 * alpha) / (1 - alpha)
150  *
151  * If the entry value can be a subtype of JSDHashEntryHdr, rather than a type
152  * that must be allocated separately and referenced by an entry.value pointer
153  * member, and provided key's allocation can be fused with its entry's, then
154  * k (the words wasted per entry with chaining) is 4.
155  *
156  * To see these curves, feed gnuplot input like so:
157  *
158  *   gnuplot> f(x,k) = (1 + k * x) / (1 - x)
159  *   gnuplot> plot [0:.75] f(x,2), f(x,3), f(x,4)
160  *
161  * For k of 2 and a well-loaded table (alpha > .5), esize must be more than 4
162  * words for chaining to be more space-efficient than double hashing.
163  *
164  * Solving for alpha helps us decide when to shrink an underloaded table:
165  *
166  *   esize                     > (1 + k * alpha) / (1 - alpha)
167  *   esize - alpha * esize     > 1 + k * alpha
168  *   esize - 1                 > (k + esize) * alpha
169  *   (esize - 1) / (k + esize) > alpha
170  *
171  *   alpha < (esize - 1) / (esize + k)
172  *
173  * Therefore double hashing should keep alpha >= (esize - 1) / (esize + k),
174  * assuming esize is not too large (in which case, chaining should probably be
175  * used for any alpha).  For esize=2 and k=3, we want alpha >= .2; for esize=3
176  * and k=2, we want alpha >= .4.  For k=4, esize could be 6, and alpha >= .5
177  * would still obtain.  See the JS_DHASH_MIN_ALPHA macro further below.
178  *
179  * The current implementation uses a configurable lower bound on alpha, which
180  * defaults to .25, when deciding to shrink the table (while still respecting
181  * JS_DHASH_MIN_SIZE).
182  *
183  * Note a qualitative difference between chaining and double hashing: under
184  * chaining, entry addresses are stable across table shrinks and grows.  With
185  * double hashing, you can't safely hold an entry pointer and use it after an
186  * ADD or REMOVE operation, unless you sample table->generation before adding
187  * or removing, and compare the sample after, dereferencing the entry pointer
188  * only if table->generation has not changed.
189  *
190  * The moral of this story: there is no one-size-fits-all hash table scheme,
191  * but for small table entry size, and assuming entry address stability is not
192  * required, double hashing wins.
193  */
194 struct JSDHashTable {
195     const JSDHashTableOps *ops;         /* virtual operations, see below */
196     void                *data;          /* ops- and instance-specific data */
197     int16               hashShift;      /* multiplicative hash shift */
198     uint8               maxAlphaFrac;   /* 8-bit fixed point max alpha */
199     uint8               minAlphaFrac;   /* 8-bit fixed point min alpha */
200     uint32              entrySize;      /* number of bytes in an entry */
201     uint32              entryCount;     /* number of entries in table */
202     uint32              removedCount;   /* removed entry sentinels in table */
203     uint32              generation;     /* entry storage generation number */
204     char                *entryStore;    /* entry storage */
205 #ifdef JS_DHASHMETER
206     struct JSDHashStats {
207         uint32          searches;       /* total number of table searches */
208         uint32          steps;          /* hash chain links traversed */
209         uint32          hits;           /* searches that found key */
210         uint32          misses;         /* searches that didn't find key */
211         uint32          lookups;        /* number of JS_DHASH_LOOKUPs */
212         uint32          addMisses;      /* adds that miss, and do work */
213         uint32          addOverRemoved; /* adds that recycled a removed entry */
214         uint32          addHits;        /* adds that hit an existing entry */
215         uint32          addFailures;    /* out-of-memory during add growth */
216         uint32          removeHits;     /* removes that hit, and do work */
217         uint32          removeMisses;   /* useless removes that miss */
218         uint32          removeFrees;    /* removes that freed entry directly */
219         uint32          removeEnums;    /* removes done by Enumerate */
220         uint32          grows;          /* table expansions */
221         uint32          shrinks;        /* table contractions */
222         uint32          compresses;     /* table compressions */
223         uint32          enumShrinks;    /* contractions after Enumerate */
224     } stats;
225 #endif
226 };
227
228 /*
229  * Size in entries (gross, not net of free and removed sentinels) for table.
230  * We store hashShift rather than sizeLog2 to optimize the collision-free case
231  * in SearchTable.
232  */
233 #define JS_DHASH_TABLE_SIZE(table)  JS_BIT(JS_DHASH_BITS - (table)->hashShift)
234
235 /*
236  * Table space at entryStore is allocated and freed using these callbacks.
237  * The allocator should return null on error only (not if called with nbytes
238  * equal to 0; but note that jsdhash.c code will never call with 0 nbytes).
239  */
240 typedef void *
241 (* JSDHashAllocTable)(JSDHashTable *table, uint32 nbytes);
242
243 typedef void
244 (* JSDHashFreeTable) (JSDHashTable *table, void *ptr);
245
246 /*
247  * Compute the hash code for a given key to be looked up, added, or removed
248  * from table.  A hash code may have any JSDHashNumber value.
249  */
250 typedef JSDHashNumber
251 (* JSDHashHashKey)   (JSDHashTable *table, const void *key);
252
253 /*
254  * Compare the key identifying entry in table with the provided key parameter.
255  * Return JS_TRUE if keys match, JS_FALSE otherwise.
256  */
257 typedef JSBool
258 (* JSDHashMatchEntry)(JSDHashTable *table, const JSDHashEntryHdr *entry,
259                       const void *key);
260
261 /*
262  * Copy the data starting at from to the new entry storage at to.  Do not add
263  * reference counts for any strong references in the entry, however, as this
264  * is a "move" operation: the old entry storage at from will be freed without
265  * any reference-decrementing callback shortly.
266  */
267 typedef void
268 (* JSDHashMoveEntry)(JSDHashTable *table, const JSDHashEntryHdr *from,
269                      JSDHashEntryHdr *to);
270
271 /*
272  * Clear the entry and drop any strong references it holds.  This callback is
273  * invoked during a JS_DHASH_REMOVE operation (see below for operation codes),
274  * but only if the given key is found in the table.
275  */
276 typedef void
277 (* JSDHashClearEntry)(JSDHashTable *table, JSDHashEntryHdr *entry);
278
279 /*
280  * Called when a table (whether allocated dynamically by itself, or nested in
281  * a larger structure, or allocated on the stack) is finished.  This callback
282  * allows table->ops-specific code to finalize table->data.
283  */
284 typedef void
285 (* JSDHashFinalize)  (JSDHashTable *table);
286
287 /*
288  * Initialize a new entry, apart from keyHash.  This function is called when
289  * JS_DHashTableOperate's JS_DHASH_ADD case finds no existing entry for the
290  * given key, and must add a new one.  At that point, entry->keyHash is not
291  * set yet, to avoid claiming the last free entry in a severely overloaded
292  * table.
293  */
294 typedef JSBool
295 (* JSDHashInitEntry)(JSDHashTable *table, JSDHashEntryHdr *entry,
296                      const void *key);
297
298 /*
299  * Finally, the "vtable" structure for JSDHashTable.  The first eight hooks
300  * must be provided by implementations; they're called unconditionally by the
301  * generic jsdhash.c code.  Hooks after these may be null.
302  *
303  * Summary of allocation-related hook usage with C++ placement new emphasis:
304  *  allocTable          Allocate raw bytes with malloc, no ctors run.
305  *  freeTable           Free raw bytes with free, no dtors run.
306  *  initEntry           Call placement new using default key-based ctor.
307  *                      Return JS_TRUE on success, JS_FALSE on error.
308  *  moveEntry           Call placement new using copy ctor, run dtor on old
309  *                      entry storage.
310  *  clearEntry          Run dtor on entry.
311  *  finalize            Stub unless table->data was initialized and needs to
312  *                      be finalized.
313  *
314  * Note the reason why initEntry is optional: the default hooks (stubs) clear
315  * entry storage:  On successful JS_DHashTableOperate(tbl, key, JS_DHASH_ADD),
316  * the returned entry pointer addresses an entry struct whose keyHash member
317  * has been set non-zero, but all other entry members are still clear (null).
318  * JS_DHASH_ADD callers can test such members to see whether the entry was
319  * newly created by the JS_DHASH_ADD call that just succeeded.  If placement
320  * new or similar initialization is required, define an initEntry hook.  Of
321  * course, the clearEntry hook must zero or null appropriately.
322  *
323  * XXX assumes 0 is null for pointer types.
324  */
325 struct JSDHashTableOps {
326     /* Mandatory hooks.  All implementations must provide these. */
327     JSDHashAllocTable   allocTable;
328     JSDHashFreeTable    freeTable;
329     JSDHashHashKey      hashKey;
330     JSDHashMatchEntry   matchEntry;
331     JSDHashMoveEntry    moveEntry;
332     JSDHashClearEntry   clearEntry;
333     JSDHashFinalize     finalize;
334
335     /* Optional hooks start here.  If null, these are not called. */
336     JSDHashInitEntry    initEntry;
337 };
338
339 /*
340  * Default implementations for the above ops.
341  */
342 extern JS_PUBLIC_API(void *)
343 JS_DHashAllocTable(JSDHashTable *table, uint32 nbytes);
344
345 extern JS_PUBLIC_API(void)
346 JS_DHashFreeTable(JSDHashTable *table, void *ptr);
347
348 extern JS_PUBLIC_API(JSDHashNumber)
349 JS_DHashStringKey(JSDHashTable *table, const void *key);
350
351 /* A minimal entry contains a keyHash header and a void key pointer. */
352 struct JSDHashEntryStub {
353     JSDHashEntryHdr hdr;
354     const void      *key;
355 };
356
357 extern JS_PUBLIC_API(JSDHashNumber)
358 JS_DHashVoidPtrKeyStub(JSDHashTable *table, const void *key);
359
360 extern JS_PUBLIC_API(JSBool)
361 JS_DHashMatchEntryStub(JSDHashTable *table,
362                        const JSDHashEntryHdr *entry,
363                        const void *key);
364
365 extern JS_PUBLIC_API(JSBool)
366 JS_DHashMatchStringKey(JSDHashTable *table,
367                        const JSDHashEntryHdr *entry,
368                        const void *key);
369
370 extern JS_PUBLIC_API(void)
371 JS_DHashMoveEntryStub(JSDHashTable *table,
372                       const JSDHashEntryHdr *from,
373                       JSDHashEntryHdr *to);
374
375 extern JS_PUBLIC_API(void)
376 JS_DHashClearEntryStub(JSDHashTable *table, JSDHashEntryHdr *entry);
377
378 extern JS_PUBLIC_API(void)
379 JS_DHashFreeStringKey(JSDHashTable *table, JSDHashEntryHdr *entry);
380
381 extern JS_PUBLIC_API(void)
382 JS_DHashFinalizeStub(JSDHashTable *table);
383
384 /*
385  * If you use JSDHashEntryStub or a subclass of it as your entry struct, and
386  * if your entries move via memcpy and clear via memset(0), you can use these
387  * stub operations.
388  */
389 extern JS_PUBLIC_API(const JSDHashTableOps *)
390 JS_DHashGetStubOps(void);
391
392 /*
393  * Dynamically allocate a new JSDHashTable using malloc, initialize it using
394  * JS_DHashTableInit, and return its address.  Return null on malloc failure.
395  * Note that the entry storage at table->entryStore will be allocated using
396  * the ops->allocTable callback.
397  */
398 extern JS_PUBLIC_API(JSDHashTable *)
399 JS_NewDHashTable(const JSDHashTableOps *ops, void *data, uint32 entrySize,
400                  uint32 capacity);
401
402 /*
403  * Finalize table's data, free its entry storage (via table->ops->freeTable),
404  * and return the memory starting at table to the malloc heap.
405  */
406 extern JS_PUBLIC_API(void)
407 JS_DHashTableDestroy(JSDHashTable *table);
408
409 /*
410  * Initialize table with ops, data, entrySize, and capacity.  Capacity is a
411  * guess for the smallest table size at which the table will usually be less
412  * than 75% loaded (the table will grow or shrink as needed; capacity serves
413  * only to avoid inevitable early growth from JS_DHASH_MIN_SIZE).
414  */
415 extern JS_PUBLIC_API(JSBool)
416 JS_DHashTableInit(JSDHashTable *table, const JSDHashTableOps *ops, void *data,
417                   uint32 entrySize, uint32 capacity);
418
419 /*
420  * Set maximum and minimum alpha for table.  The defaults are 0.75 and .25.
421  * maxAlpha must be in [0.5, 0.9375] for the default JS_DHASH_MIN_SIZE; or if
422  * MinSize=JS_DHASH_MIN_SIZE <= 256, in [0.5, (float)(MinSize-1)/MinSize]; or
423  * else in [0.5, 255.0/256].  minAlpha must be in [0, maxAlpha / 2), so that
424  * we don't shrink on the very next remove after growing a table upon adding
425  * an entry that brings entryCount past maxAlpha * tableSize.
426  */
427 extern JS_PUBLIC_API(void)
428 JS_DHashTableSetAlphaBounds(JSDHashTable *table,
429                             float maxAlpha,
430                             float minAlpha);
431
432 /*
433  * Call this macro with k, the number of pointer-sized words wasted per entry
434  * under chaining, to compute the minimum alpha at which double hashing still
435  * beats chaining.
436  */
437 #define JS_DHASH_MIN_ALPHA(table, k)                                          \
438     ((float)((table)->entrySize / sizeof(void *) - 1)                         \
439      / ((table)->entrySize / sizeof(void *) + (k)))
440
441 /*
442  * Default max/min alpha, and macros to compute the value for the |capacity|
443  * parameter to JS_NewDHashTable and JS_DHashTableInit, given default or any
444  * max alpha, such that adding entryCount entries right after initializing the
445  * table will not require a reallocation (so JS_DHASH_ADD can't fail for those
446  * JS_DHashTableOperate calls).
447  *
448  * NB: JS_DHASH_CAP is a helper macro meant for use only in JS_DHASH_CAPACITY.
449  * Don't use it directly!
450  */
451 #define JS_DHASH_DEFAULT_MAX_ALPHA 0.75
452 #define JS_DHASH_DEFAULT_MIN_ALPHA 0.25
453
454 #define JS_DHASH_CAP(entryCount, maxAlpha)                                    \
455     ((uint32)((double)(entryCount) / (maxAlpha)))
456
457 #define JS_DHASH_CAPACITY(entryCount, maxAlpha)                               \
458     (JS_DHASH_CAP(entryCount, maxAlpha) +                                     \
459      (((JS_DHASH_CAP(entryCount, maxAlpha) * (uint8)(0x100 * (maxAlpha)))     \
460        >> 8) < (entryCount)))
461
462 #define JS_DHASH_DEFAULT_CAPACITY(entryCount)                                 \
463     JS_DHASH_CAPACITY(entryCount, JS_DHASH_DEFAULT_MAX_ALPHA)
464
465 /*
466  * Finalize table's data, free its entry storage using table->ops->freeTable,
467  * and leave its members unchanged from their last live values (which leaves
468  * pointers dangling).  If you want to burn cycles clearing table, it's up to
469  * your code to call memset.
470  */
471 extern JS_PUBLIC_API(void)
472 JS_DHashTableFinish(JSDHashTable *table);
473
474 /*
475  * To consolidate keyHash computation and table grow/shrink code, we use a
476  * single entry point for lookup, add, and remove operations.  The operation
477  * codes are declared here, along with codes returned by JSDHashEnumerator
478  * functions, which control JS_DHashTableEnumerate's behavior.
479  */
480 typedef enum JSDHashOperator {
481     JS_DHASH_LOOKUP = 0,        /* lookup entry */
482     JS_DHASH_ADD = 1,           /* add entry */
483     JS_DHASH_REMOVE = 2,        /* remove entry, or enumerator says remove */
484     JS_DHASH_NEXT = 0,          /* enumerator says continue */
485     JS_DHASH_STOP = 1           /* enumerator says stop */
486 } JSDHashOperator;
487
488 /*
489  * To lookup a key in table, call:
490  *
491  *  entry = JS_DHashTableOperate(table, key, JS_DHASH_LOOKUP);
492  *
493  * If JS_DHASH_ENTRY_IS_BUSY(entry) is true, key was found and it identifies
494  * entry.  If JS_DHASH_ENTRY_IS_FREE(entry) is true, key was not found.
495  *
496  * To add an entry identified by key to table, call:
497  *
498  *  entry = JS_DHashTableOperate(table, key, JS_DHASH_ADD);
499  *
500  * If entry is null upon return, then either the table is severely overloaded,
501  * and memory can't be allocated for entry storage via table->ops->allocTable;
502  * Or if table->ops->initEntry is non-null, the table->ops->initEntry op may
503  * have returned false.
504  *
505  * Otherwise, entry->keyHash has been set so that JS_DHASH_ENTRY_IS_BUSY(entry)
506  * is true, and it is up to the caller to initialize the key and value parts
507  * of the entry sub-type, if they have not been set already (i.e. if entry was
508  * not already in the table, and if the optional initEntry hook was not used).
509  *
510  * To remove an entry identified by key from table, call:
511  *
512  *  (void) JS_DHashTableOperate(table, key, JS_DHASH_REMOVE);
513  *
514  * If key's entry is found, it is cleared (via table->ops->clearEntry) and
515  * the entry is marked so that JS_DHASH_ENTRY_IS_FREE(entry).  This operation
516  * returns null unconditionally; you should ignore its return value.
517  */
518 extern JS_PUBLIC_API(JSDHashEntryHdr *) JS_DHASH_FASTCALL
519 JS_DHashTableOperate(JSDHashTable *table, const void *key, JSDHashOperator op);
520
521 /*
522  * Remove an entry already accessed via LOOKUP or ADD.
523  *
524  * NB: this is a "raw" or low-level routine, intended to be used only where
525  * the inefficiency of a full JS_DHashTableOperate (which rehashes in order
526  * to find the entry given its key) is not tolerable.  This function does not
527  * shrink the table if it is underloaded.  It does not update stats #ifdef
528  * JS_DHASHMETER, either.
529  */
530 extern JS_PUBLIC_API(void)
531 JS_DHashTableRawRemove(JSDHashTable *table, JSDHashEntryHdr *entry);
532
533 /*
534  * Enumerate entries in table using etor:
535  *
536  *   count = JS_DHashTableEnumerate(table, etor, arg);
537  *
538  * JS_DHashTableEnumerate calls etor like so:
539  *
540  *   op = etor(table, entry, number, arg);
541  *
542  * where number is a zero-based ordinal assigned to live entries according to
543  * their order in table->entryStore.
544  *
545  * The return value, op, is treated as a set of flags.  If op is JS_DHASH_NEXT,
546  * then continue enumerating.  If op contains JS_DHASH_REMOVE, then clear (via
547  * table->ops->clearEntry) and free entry.  Then we check whether op contains
548  * JS_DHASH_STOP; if so, stop enumerating and return the number of live entries
549  * that were enumerated so far.  Return the total number of live entries when
550  * enumeration completes normally.
551  *
552  * If etor calls JS_DHashTableOperate on table with op != JS_DHASH_LOOKUP, it
553  * must return JS_DHASH_STOP; otherwise undefined behavior results.
554  *
555  * If any enumerator returns JS_DHASH_REMOVE, table->entryStore may be shrunk
556  * or compressed after enumeration, but before JS_DHashTableEnumerate returns.
557  * Such an enumerator therefore can't safely set aside entry pointers, but an
558  * enumerator that never returns JS_DHASH_REMOVE can set pointers to entries
559  * aside, e.g., to avoid copying live entries into an array of the entry type.
560  * Copying entry pointers is cheaper, and safe so long as the caller of such a
561  * "stable" Enumerate doesn't use the set-aside pointers after any call either
562  * to PL_DHashTableOperate, or to an "unstable" form of Enumerate, which might
563  * grow or shrink entryStore.
564  *
565  * If your enumerator wants to remove certain entries, but set aside pointers
566  * to other entries that it retains, it can use JS_DHashTableRawRemove on the
567  * entries to be removed, returning JS_DHASH_NEXT to skip them.  Likewise, if
568  * you want to remove entries, but for some reason you do not want entryStore
569  * to be shrunk or compressed, you can call JS_DHashTableRawRemove safely on
570  * the entry being enumerated, rather than returning JS_DHASH_REMOVE.
571  */
572 typedef JSDHashOperator
573 (* JSDHashEnumerator)(JSDHashTable *table, JSDHashEntryHdr *hdr, uint32 number,
574                       void *arg);
575
576 extern JS_PUBLIC_API(uint32)
577 JS_DHashTableEnumerate(JSDHashTable *table, JSDHashEnumerator etor, void *arg);
578
579 #ifdef DEBUG
580 /**
581  * Mark a table as immutable for the remainder of its lifetime.  This
582  * changes the implementation from ASSERTing one set of invariants to
583  * ASSERTing a different set.
584  *
585  * When a table is NOT marked as immutable, the table implementation
586  * asserts that the table is not mutated from its own callbacks.  It
587  * assumes the caller protects the table from being accessed on multiple
588  * threads simultaneously.
589  *
590  * When the table is marked as immutable, the re-entry assertions will
591  * no longer trigger erroneously due to multi-threaded access.  Instead,
592  * mutations will cause assertions.
593  */
594 extern JS_PUBLIC_API(void)
595 JS_DHashMarkTableImmutable(JSDHashTable *table);
596 #endif
597
598 #ifdef JS_DHASHMETER
599 #include <stdio.h>
600
601 extern JS_PUBLIC_API(void)
602 JS_DHashTableDumpMeter(JSDHashTable *table, JSDHashEnumerator dump, FILE *fp);
603 #endif
604
605 JS_END_EXTERN_C
606
607 #endif /* jsdhash_h___ */