Added instruction to install dos2unix before Arduino build in readme doc.

This commit also includes explanation of the newer "SHIELD" option
for Arduino builds (ie. the current Arduino Shield on your Arduino
device).

Change-Id: I4b86fef5af77e567b19fcbab19cf87b23b5d576a
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/1765
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>

diff --git a/Readme.scons.txt b/Readme.scons.txt
index a66dbb4..fd0b3a0 100644 (file)
--- a/Readme.scons.txt
+++ b/Readme.scons.txt
@@ -90,7 +90,7 @@ To build for Android, Andorid NDK and SDK are required.
 Arduino:
 To build for Arduino, Arduino IDE is required.
   Arduino IDE: http://arduino.cc/en/Main/Software
-  (Note: recommend install Arduino IDE >=1.5.7)
+  (Note: recommend install Arduino IDE >=1.5.8)
 
 Arduino builds are dependent on latest Time library. Download it from here:
     http://www.pjrc.com/teensy/td_libs_Time.html
@@ -148,13 +148,14 @@ allowed value, please execute command 'scons TARGET_OS=android -Q -h')
 
 3. Build IoTivity project for Arduino
       $ cd <top directory of the project>
-      $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy
-(xxx can be avr, arm; yyy is the name of the board, to get its allowed value
-run: scons TARGET_OS=arduino TARGET_ARCH=xxx -h. You may see a option 'CPU' in
-the output of above command line, that's due to some boards have different
-processors, to specify the processor, add 'CPU=zzz' in the command line. If no
-'CPU' option exists, that means the board only support one kind of processor,
-it's unnecessary to specify it)
+      $ sudo apt-get install dos2unix
+      $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy SHIELD=zzz
+(xxx can be avr, arm; yyy is the name of the board, zzz is the shield type, to
+get allowed values run: scons TARGET_OS=arduino TARGET_ARCH=xxx SHIELD=zzz -h.
+You may see a option 'CPU' in the output of above command line, that's due to
+some boards have different processors, to specify the processor, add 'CPU=zzz'
+in the command line. If no 'CPU' option exists, that means the board only
+support one kind of processor, it's unnecessary to specify it)
 
 4. Build Iotivity project for Tizen
       $ cd <top directory of the project>
@@ -164,24 +165,6 @@ gbs is default build tool for Tizen platfrom, we can refer the following
 wiki to setup Tizen development environment:
 https://source.tizen.org/documentation/developer-guide/getting-started-guide)
 
-=== Build IoTivity project on Android ===
-
-1. Build IoTivity project for Android(It's the same as on Ubuntu)
-      $ cd <top directory of the project>
-      $ scons TARGET_OS=android TARGET_ARCH=xxx
-(xxx can be x86, armeabi, armeabi-v7a, armeabi-v7a-hard ...)
-
-2. Build IoTivity project for Arduino(It's the same as on Ubuntu)
-      $ cd <top directory of the project>
-      $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy
-(xxx can be avr, arm; yyy is the name of the board, to get its allowed value
-run: scons TARGET_OS=arduino TARGET_ARCH=xxx -h. You may see a option 'CPU' in
-the output of above command line, that's due to some boards have different
-processor, to specify the processor, add 'CPU=zzz' in the command line. If no
-'CPU' option exists, that means the board only support one kind of processor,
-it's unnecessary to specify it)
-
-
 Note: Currently most IoTivity project doesn't support Windows, so you can't set
 TARGET_OS to 'windows' except the project support Windows.
 
@@ -217,6 +200,3 @@ To build:
      $ auto_build.sh <path-to-android-ndk>
 To clean:
      $ auto_build.sh -c
-
-2) For Arduino build, the Time library should >=1.3. The old can only be built
-with Arduino IDE 1.0.x