Makefile.in

   1 # Makefile.in generated by automake 1.13.4 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17
  18 VPATH = @srcdir@
  19 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  20 am__make_running_with_option = \
  21   case $${target_option-} in \
  22       ?) ;; \
  23       *) echo "am__make_running_with_option: internal error: invalid" \
  24               "target option '$${target_option-}' specified" >&2; \
  25          exit 1;; \
  26   esac; \
  27   has_opt=no; \
  28   sane_makeflags=$$MAKEFLAGS; \
  29   if $(am__is_gnu_make); then \
  30     sane_makeflags=$$MFLAGS; \
  31   else \
  32     case $$MAKEFLAGS in \
  33       *\\[\ \   ]*) \
  34         bs=\\; \
  35         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  36           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  37     esac; \
  38   fi; \
  39   skip_next=no; \
  40   strip_trailopt () \
  41   { \
  42     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  43   }; \
  44   for flg in $$sane_makeflags; do \
  45     test $$skip_next = yes && { skip_next=no; continue; }; \
  46     case $$flg in \
  47       *=*|--*) continue;; \
  48         -*I) strip_trailopt 'I'; skip_next=yes;; \
  49       -*I?*) strip_trailopt 'I';; \
  50         -*O) strip_trailopt 'O'; skip_next=yes;; \
  51       -*O?*) strip_trailopt 'O';; \
  52         -*l) strip_trailopt 'l'; skip_next=yes;; \
  53       -*l?*) strip_trailopt 'l';; \
  54       -[dEDm]) skip_next=yes;; \
  55       -[JT]) skip_next=yes;; \
  56     esac; \
  57     case $$flg in \
  58       *$$target_option*) has_opt=yes; break;; \
  59     esac; \
  60   done; \
  61   test $$has_opt = yes
  62 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  63 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  64 pkgdatadir = $(datadir)/@PACKAGE@
  65 pkgincludedir = $(includedir)/@PACKAGE@
  66 pkglibdir = $(libdir)/@PACKAGE@
  67 pkglibexecdir = $(libexecdir)/@PACKAGE@
  68 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  69 install_sh_DATA = $(install_sh) -c -m 644
  70 install_sh_PROGRAM = $(install_sh) -c
  71 install_sh_SCRIPT = $(install_sh) -c
  72 INSTALL_HEADER = $(INSTALL_DATA)
  73 transform = $(program_transform_name)
  74 NORMAL_INSTALL = :
  75 PRE_INSTALL = :
  76 POST_INSTALL = :
  77 NORMAL_UNINSTALL = :
  78 PRE_UNINSTALL = :
  79 POST_UNINSTALL = :
  80 build_triplet = @build@
  81 host_triplet = @host@
  82 subdir = .
  83 DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
  84         $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  85         $(top_srcdir)/configure $(am__configure_deps) \
  86         $(srcdir)/config.h.in $(srcdir)/edje.pc.in \
  87         $(srcdir)/edje.spec.in ABOUT-NLS COPYING compile config.guess \
  88         config.sub depcomp install-sh missing ltmain.sh
  89 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  90 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
  91         $(top_srcdir)/m4/efl_binary.m4 \
  92         $(top_srcdir)/m4/efl_coverage.m4 \
  93         $(top_srcdir)/m4/efl_doxygen.m4 \
  94         $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
  95         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  96         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  97         $(top_srcdir)/configure.ac
  98 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  99         $(ACLOCAL_M4)
 100 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 101  configure.lineno config.status.lineno
 102 mkinstalldirs = $(install_sh) -d
 103 CONFIG_HEADER = config.h
 104 CONFIG_CLEAN_FILES = edje.pc edje.spec
 105 CONFIG_CLEAN_VPATH_FILES =
 106 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 107 am__vpath_adj = case $$p in \
 108     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 109     *) f=$$p;; \
 110   esac;
 111 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 112 am__install_max = 40
 113 am__nobase_strip_setup = \
 114   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 115 am__nobase_strip = \
 116   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 117 am__nobase_list = $(am__nobase_strip_setup); \
 118   for p in $$list; do echo "$$p $$p"; done | \
 119   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 120   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 121     if (++n[$$2] == $(am__install_max)) \
 122       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 123     END { for (dir in files) print dir, files[dir] }'
 124 am__base_list = \
 125   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 126   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 127 am__uninstall_files_from_dir = { \
 128   test -z "$$files" \
 129     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 130     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 131          $(am__cd) "$$dir" && rm -f $$files; }; \
 132   }
 133 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
 134 SCRIPTS = $(bin_SCRIPTS)
 135 AM_V_P = $(am__v_P_@AM_V@)
 136 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 137 am__v_P_0 = false
 138 am__v_P_1 = :
 139 AM_V_GEN = $(am__v_GEN_@AM_V@)
 140 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 141 am__v_GEN_0 = @echo "  GEN     " $@;
 142 am__v_GEN_1 =
 143 AM_V_at = $(am__v_at_@AM_V@)
 144 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 145 am__v_at_0 = @
 146 am__v_at_1 =
 147 SOURCES =
 148 DIST_SOURCES =
 149 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 150         ctags-recursive dvi-recursive html-recursive info-recursive \
 151         install-data-recursive install-dvi-recursive \
 152         install-exec-recursive install-html-recursive \
 153         install-info-recursive install-pdf-recursive \
 154         install-ps-recursive install-recursive installcheck-recursive \
 155         installdirs-recursive pdf-recursive ps-recursive \
 156         tags-recursive uninstall-recursive
 157 am__can_run_installinfo = \
 158   case $$AM_UPDATE_INFO_DIR in \
 159     n|no|NO) false;; \
 160     *) (install-info --version) >/dev/null 2>&1;; \
 161   esac
 162 DATA = $(pkgconfig_DATA)
 163 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 164   distclean-recursive maintainer-clean-recursive
 165 am__recursive_targets = \
 166   $(RECURSIVE_TARGETS) \
 167   $(RECURSIVE_CLEAN_TARGETS) \
 168   $(am__extra_recursive_targets)
 169 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 170         cscope distdir dist dist-all distcheck
 171 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 172         $(LISP)config.h.in
 173 # Read a list of newline-separated strings from the standard input,
 174 # and print each of them once, without duplicates.  Input order is
 175 # *not* preserved.
 176 am__uniquify_input = $(AWK) '\
 177   BEGIN { nonempty = 0; } \
 178   { items[$$0] = 1; nonempty = 1; } \
 179   END { if (nonempty) { for (i in items) print i; }; } \
 180 '
 181 # Make sure the list of sources is unique.  This is necessary because,
 182 # e.g., the same source file might be shared among _SOURCES variables
 183 # for different programs/libraries.
 184 am__define_uniq_tagged_files = \
 185   list='$(am__tagged_files)'; \
 186   unique=`for i in $$list; do \
 187     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 188   done | $(am__uniquify_input)`
 189 ETAGS = etags
 190 CTAGS = ctags
 191 CSCOPE = cscope
 192 DIST_SUBDIRS = $(SUBDIRS)
 193 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 194 distdir = $(PACKAGE)-$(VERSION)
 195 top_distdir = $(distdir)
 196 am__remove_distdir = \
 197   if test -d "$(distdir)"; then \
 198     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 199       && rm -rf "$(distdir)" \
 200       || { sleep 5 && rm -rf "$(distdir)"; }; \
 201   else :; fi
 202 am__post_remove_distdir = $(am__remove_distdir)
 203 am__relativize = \
 204   dir0=`pwd`; \
 205   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 206   sed_rest='s,^[^/]*/*,,'; \
 207   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 208   sed_butlast='s,/*[^/]*$$,,'; \
 209   while test -n "$$dir1"; do \
 210     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 211     if test "$$first" != "."; then \
 212       if test "$$first" = ".."; then \
 213         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 214         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 215       else \
 216         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 217         if test "$$first2" = "$$first"; then \
 218           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 219         else \
 220           dir2="../$$dir2"; \
 221         fi; \
 222         dir0="$$dir0"/"$$first"; \
 223       fi; \
 224     fi; \
 225     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 226   done; \
 227   reldir="$$dir2"
 228 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 229 GZIP_ENV = --best
 230 DIST_TARGETS = dist-bzip2 dist-gzip
 231 distuninstallcheck_listfiles = find . -type f -print
 232 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 233   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 234 distcleancheck_listfiles = find . -type f -print
 235 ACLOCAL = @ACLOCAL@
 236 ALLOCA = @ALLOCA@
 237 ALSA_CFLAGS = @ALSA_CFLAGS@
 238 ALSA_LIBS = @ALSA_LIBS@
 239 AMTAR = @AMTAR@
 240 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 241 AR = @AR@
 242 AS = @AS@
 243 AUTOCONF = @AUTOCONF@
 244 AUTOHEADER = @AUTOHEADER@
 245 AUTOMAKE = @AUTOMAKE@
 246 AWK = @AWK@
 247 CC = @CC@
 248 CCDEPMODE = @CCDEPMODE@
 249 CFLAGS = @CFLAGS@
 250 CHECK_CFLAGS = @CHECK_CFLAGS@
 251 CHECK_LIBS = @CHECK_LIBS@
 252 CPP = @CPP@
 253 CPPFLAGS = @CPPFLAGS@
 254 CYGPATH_W = @CYGPATH_W@
 255 DEFS = @DEFS@
 256 DEPDIR = @DEPDIR@
 257 DLLTOOL = @DLLTOOL@
 258 DSYMUTIL = @DSYMUTIL@
 259 DUMPBIN = @DUMPBIN@
 260 ECHO_C = @ECHO_C@
 261 ECHO_N = @ECHO_N@
 262 ECHO_T = @ECHO_T@
 263 ECORE_IMF_CFLAGS = @ECORE_IMF_CFLAGS@
 264 ECORE_IMF_LIBS = @ECORE_IMF_LIBS@
 265 EDJE_CC_CFLAGS = @EDJE_CC_CFLAGS@
 266 EDJE_CC_LIBS = @EDJE_CC_LIBS@
 267 EDJE_CC_PRG = @EDJE_CC_PRG@
 268 EDJE_CFLAGS = @EDJE_CFLAGS@
 269 EDJE_DECC_CFLAGS = @EDJE_DECC_CFLAGS@
 270 EDJE_DECC_LIBS = @EDJE_DECC_LIBS@
 271 EDJE_DECC_PRG = @EDJE_DECC_PRG@
 272 EDJE_EXTERNAL_INSPECTOR_CFLAGS = @EDJE_EXTERNAL_INSPECTOR_CFLAGS@
 273 EDJE_EXTERNAL_INSPECTOR_LIBS = @EDJE_EXTERNAL_INSPECTOR_LIBS@
 274 EDJE_EXTERNAL_INSPECTOR_PRG = @EDJE_EXTERNAL_INSPECTOR_PRG@
 275 EDJE_INSPECTOR_CFLAGS = @EDJE_INSPECTOR_CFLAGS@
 276 EDJE_INSPECTOR_LIBS = @EDJE_INSPECTOR_LIBS@
 277 EDJE_INSPECTOR_PRG = @EDJE_INSPECTOR_PRG@
 278 EDJE_LIBS = @EDJE_LIBS@
 279 EDJE_PLAYER_CFLAGS = @EDJE_PLAYER_CFLAGS@
 280 EDJE_PLAYER_LIBS = @EDJE_PLAYER_LIBS@
 281 EDJE_PLAYER_PRG = @EDJE_PLAYER_PRG@
 282 EDJE_RECC_PRG = @EDJE_RECC_PRG@
 283 EDJE_WATCH_CFLAGS = @EDJE_WATCH_CFLAGS@
 284 EDJE_WATCH_LIBS = @EDJE_WATCH_LIBS@
 285 EDJE_WATCH_PRG = @EDJE_WATCH_PRG@
 286 EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
 287 EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
 288 EFL_EDJE_BUILD = @EFL_EDJE_BUILD@
 289 EGREP = @EGREP@
 290 EIO_CFLAGS = @EIO_CFLAGS@
 291 EIO_LIBS = @EIO_LIBS@
 292 EVIL_CFLAGS = @EVIL_CFLAGS@
 293 EVIL_LIBS = @EVIL_LIBS@
 294 EXEEXT = @EXEEXT@
 295 FGREP = @FGREP@
 296 FLAC_CFLAGS = @FLAC_CFLAGS@
 297 FLAC_LIBS = @FLAC_LIBS@
 298 GREP = @GREP@
 299 INSTALL = @INSTALL@
 300 INSTALL_DATA = @INSTALL_DATA@
 301 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 302 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 303 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 304 LD = @LD@
 305 LDFLAGS = @LDFLAGS@
 306 LIBOBJS = @LIBOBJS@
 307 LIBS = @LIBS@
 308 LIBTOOL = @LIBTOOL@
 309 LIPO = @LIPO@
 310 LN_S = @LN_S@
 311 LTLIBOBJS = @LTLIBOBJS@
 312 LUA_CFLAGS = @LUA_CFLAGS@
 313 LUA_LIBS = @LUA_LIBS@
 314 MAKEINFO = @MAKEINFO@
 315 MANIFEST_TOOL = @MANIFEST_TOOL@
 316 MINIMAL_CFLAGS = @MINIMAL_CFLAGS@
 317 MINIMAL_LIBS = @MINIMAL_LIBS@
 318 MKDIR_P = @MKDIR_P@
 319 MODULE_ARCH = @MODULE_ARCH@
 320 NM = @NM@
 321 NMEDIT = @NMEDIT@
 322 OBJDUMP = @OBJDUMP@
 323 OBJEXT = @OBJEXT@
 324 OTOOL = @OTOOL@
 325 OTOOL64 = @OTOOL64@
 326 PACKAGE = @PACKAGE@
 327 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 328 PACKAGE_NAME = @PACKAGE_NAME@
 329 PACKAGE_STRING = @PACKAGE_STRING@
 330 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 331 PACKAGE_URL = @PACKAGE_URL@
 332 PACKAGE_VERSION = @PACKAGE_VERSION@
 333 PATH_SEPARATOR = @PATH_SEPARATOR@
 334 PKG_CONFIG = @PKG_CONFIG@
 335 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
 336 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 337 PYTHON = @PYTHON@
 338 PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
 339 PYTHON_PLATFORM = @PYTHON_PLATFORM@
 340 PYTHON_PREFIX = @PYTHON_PREFIX@
 341 PYTHON_VERSION = @PYTHON_VERSION@
 342 RANLIB = @RANLIB@
 343 REMIX_CFLAGS = @REMIX_CFLAGS@
 344 REMIX_LIBS = @REMIX_LIBS@
 345 REMIX_PLUGIN_DIR = @REMIX_PLUGIN_DIR@
 346 SED = @SED@
 347 SET_MAKE = @SET_MAKE@
 348 SHELL = @SHELL@
 349 SNDFILE_CFLAGS = @SNDFILE_CFLAGS@
 350 SNDFILE_LIBS = @SNDFILE_LIBS@
 351 STRIP = @STRIP@
 352 VERSION = @VERSION@
 353 VMAJ = @VMAJ@
 354 VORBISENC_CFLAGS = @VORBISENC_CFLAGS@
 355 VORBISENC_LIBS = @VORBISENC_LIBS@
 356 abs_builddir = @abs_builddir@
 357 abs_srcdir = @abs_srcdir@
 358 abs_top_builddir = @abs_top_builddir@
 359 abs_top_srcdir = @abs_top_srcdir@
 360 ac_ct_AR = @ac_ct_AR@
 361 ac_ct_CC = @ac_ct_CC@
 362 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 363 am__include = @am__include@
 364 am__leading_dot = @am__leading_dot@
 365 am__quote = @am__quote@
 366 am__tar = @am__tar@
 367 am__untar = @am__untar@
 368 bindir = @bindir@
 369 build = @build@
 370 build_alias = @build_alias@
 371 build_cpu = @build_cpu@
 372 build_os = @build_os@
 373 build_vendor = @build_vendor@
 374 builddir = @builddir@
 375 datadir = @datadir@
 376 datarootdir = @datarootdir@
 377 docdir = @docdir@
 378 dvidir = @dvidir@
 379 edje_cc = @edje_cc@
 380 efl_doxygen = @efl_doxygen@
 381 efl_have_doxygen = @efl_have_doxygen@
 382 exec_prefix = @exec_prefix@
 383 have_lcov = @have_lcov@
 384 host = @host@
 385 host_alias = @host_alias@
 386 host_cpu = @host_cpu@
 387 host_os = @host_os@
 388 host_vendor = @host_vendor@
 389 htmldir = @htmldir@
 390 includedir = @includedir@
 391 infodir = @infodir@
 392 install_sh = @install_sh@
 393 libdir = @libdir@
 394 libexecdir = @libexecdir@
 395 localedir = @localedir@
 396 localstatedir = @localstatedir@
 397 lt_enable_auto_import = @lt_enable_auto_import@
 398 lua_libs = @lua_libs@
 399 mandir = @mandir@
 400 mkdir_p = @mkdir_p@
 401 oldincludedir = @oldincludedir@
 402 pdfdir = @pdfdir@
 403 pkgconfig_requires_private = @pkgconfig_requires_private@
 404 pkgpyexecdir = @pkgpyexecdir@
 405 pkgpythondir = @pkgpythondir@
 406 prefix = @prefix@
 407 program_transform_name = @program_transform_name@
 408 psdir = @psdir@
 409 pyexecdir = @pyexecdir@
 410 pythondir = @pythondir@
 411 release_info = @release_info@
 412 requirement_edje = @requirement_edje@
 413 sbindir = @sbindir@
 414 sharedstatedir = @sharedstatedir@
 415 srcdir = @srcdir@
 416 sysconfdir = @sysconfdir@
 417 target_alias = @target_alias@
 418 top_build_prefix = @top_build_prefix@
 419 top_builddir = @top_builddir@
 420 top_srcdir = @top_srcdir@
 421 version_info = @version_info@
 422 vimdir = @vimdir@
 423 want_multisense = @want_multisense@
 424 ACLOCAL_AMFLAGS = -I m4
 425 SUBDIRS = data src utils doc
 426 MAINTAINERCLEANFILES = \
 427 Makefile.in \
 428 aclocal.m4 \
 429 compile \
 430 config.guess \
 431 config.h.in \
 432 config.h.in~ \
 433 config.sub \
 434 configure \
 435 depcomp \
 436 install-sh \
 437 ltmain.sh \
 438 missing \
 439 $(PACKAGE_TARNAME)-$(PACKAGE_VERSION).tar.gz \
 440 $(PACKAGE_TARNAME)-$(PACKAGE_VERSION).tar.bz2 \
 441 $(PACKAGE_TARNAME)-$(PACKAGE_VERSION)-doc.tar.bz2 \
 442 m4/libtool.m4 \
 443 m4/lt~obsolete.m4 \
 444 m4/ltoptions.m4 \
 445 m4/ltsugar.m4 \
 446 m4/ltversion.m4
 447
 448
 449 ### this is all fine and great - but edje should not be going and installing
 450 ### data in another software's data dir - it's just wrong. not to mention this
 451 ### also breaks make distcheck...
 452 #       if test "x${vimdir}" != "x"; then \
 453 #         $(mkinstalldirs) $(DESTDIR)$(vimdir)/syntax; \
 454 #         cp -p $(srcdir)/data/edc.vim $(DESTDIR)$(vimdir)/syntax/; \
 455 #       fi
 456 bin_SCRIPTS =
 457 EXTRA_DIST = \
 458 AUTHORS \
 459 COPYING \
 460 autogen.sh \
 461 edje.pc.in \
 462 edje.spec \
 463 edje.spec.in \
 464 README
 465
 466 pkgconfigdir = $(libdir)/pkgconfig
 467 pkgconfig_DATA = edje.pc
 468 all: config.h
 469         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 470
 471 .SUFFIXES:
 472 am--refresh: Makefile
 473         @:
 474 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 475         @for dep in $?; do \
 476           case '$(am__configure_deps)' in \
 477             *$$dep*) \
 478               echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
 479               $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
 480                 && exit 0; \
 481               exit 1;; \
 482           esac; \
 483         done; \
 484         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 485         $(am__cd) $(top_srcdir) && \
 486           $(AUTOMAKE) --gnu Makefile
 487 .PRECIOUS: Makefile
 488 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 489         @case '$?' in \
 490           *config.status*) \
 491             echo ' $(SHELL) ./config.status'; \
 492             $(SHELL) ./config.status;; \
 493           *) \
 494             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 495             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 496         esac;
 497
 498 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 499         $(SHELL) ./config.status --recheck
 500
 501 $(top_srcdir)/configure:  $(am__configure_deps)
 502         $(am__cd) $(srcdir) && $(AUTOCONF)
 503 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 504         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 505 $(am__aclocal_m4_deps):
 506
 507 config.h: stamp-h1
 508         @if test ! -f $@; then rm -f stamp-h1; else :; fi
 509         @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 510
 511 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 512         @rm -f stamp-h1
 513         cd $(top_builddir) && $(SHELL) ./config.status config.h
 514 $(srcdir)/config.h.in:  $(am__configure_deps)
 515         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 516         rm -f stamp-h1
 517         touch $@
 518
 519 distclean-hdr:
 520         -rm -f config.h stamp-h1
 521 edje.pc: $(top_builddir)/config.status $(srcdir)/edje.pc.in
 522         cd $(top_builddir) && $(SHELL) ./config.status $@
 523 edje.spec: $(top_builddir)/config.status $(srcdir)/edje.spec.in
 524         cd $(top_builddir) && $(SHELL) ./config.status $@
 525 install-binSCRIPTS: $(bin_SCRIPTS)
 526         @$(NORMAL_INSTALL)
 527         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
 528         if test -n "$$list"; then \
 529           echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
 530           $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
 531         fi; \
 532         for p in $$list; do \
 533           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 534           if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
 535         done | \
 536         sed -e 'p;s,.*/,,;n' \
 537             -e 'h;s|.*|.|' \
 538             -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
 539         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
 540           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 541             if ($$2 == $$4) { files[d] = files[d] " " $$1; \
 542               if (++n[d] == $(am__install_max)) { \
 543                 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
 544             else { print "f", d "/" $$4, $$1 } } \
 545           END { for (d in files) print "f", d, files[d] }' | \
 546         while read type dir files; do \
 547              if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 548              test -z "$$files" || { \
 549                echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 550                $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 551              } \
 552         ; done
 553
 554 uninstall-binSCRIPTS:
 555         @$(NORMAL_UNINSTALL)
 556         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
 557         files=`for p in $$list; do echo "$$p"; done | \
 558                sed -e 's,.*/,,;$(transform)'`; \
 559         dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
 560
 561 mostlyclean-libtool:
 562         -rm -f *.lo
 563
 564 clean-libtool:
 565         -rm -rf .libs _libs
 566
 567 distclean-libtool:
 568         -rm -f libtool config.lt
 569 install-pkgconfigDATA: $(pkgconfig_DATA)
 570         @$(NORMAL_INSTALL)
 571         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 572         if test -n "$$list"; then \
 573           echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
 574           $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
 575         fi; \
 576         for p in $$list; do \
 577           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 578           echo "$$d$$p"; \
 579         done | $(am__base_list) | \
 580         while read files; do \
 581           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
 582           $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 583         done
 584
 585 uninstall-pkgconfigDATA:
 586         @$(NORMAL_UNINSTALL)
 587         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 588         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 589         dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 590
 591 # This directory's subdirectories are mostly independent; you can cd
 592 # into them and run 'make' without going through this Makefile.
 593 # To change the values of 'make' variables: instead of editing Makefiles,
 594 # (1) if the variable is set in 'config.status', edit 'config.status'
 595 #     (which will cause the Makefiles to be regenerated when you run 'make');
 596 # (2) otherwise, pass the desired values on the 'make' command line.
 597 $(am__recursive_targets):
 598         @fail=; \
 599         if $(am__make_keepgoing); then \
 600           failcom='fail=yes'; \
 601         else \
 602           failcom='exit 1'; \
 603         fi; \
 604         dot_seen=no; \
 605         target=`echo $@ | sed s/-recursive//`; \
 606         case "$@" in \
 607           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 608           *) list='$(SUBDIRS)' ;; \
 609         esac; \
 610         for subdir in $$list; do \
 611           echo "Making $$target in $$subdir"; \
 612           if test "$$subdir" = "."; then \
 613             dot_seen=yes; \
 614             local_target="$$target-am"; \
 615           else \
 616             local_target="$$target"; \
 617           fi; \
 618           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 619           || eval $$failcom; \
 620         done; \
 621         if test "$$dot_seen" = "no"; then \
 622           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 623         fi; test -z "$$fail"
 624
 625 ID: $(am__tagged_files)
 626         $(am__define_uniq_tagged_files); mkid -fID $$unique
 627 tags: tags-recursive
 628 TAGS: tags
 629
 630 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 631         set x; \
 632         here=`pwd`; \
 633         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 634           include_option=--etags-include; \
 635           empty_fix=.; \
 636         else \
 637           include_option=--include; \
 638           empty_fix=; \
 639         fi; \
 640         list='$(SUBDIRS)'; for subdir in $$list; do \
 641           if test "$$subdir" = .; then :; else \
 642             test ! -f $$subdir/TAGS || \
 643               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 644           fi; \
 645         done; \
 646         $(am__define_uniq_tagged_files); \
 647         shift; \
 648         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 649           test -n "$$unique" || unique=$$empty_fix; \
 650           if test $$# -gt 0; then \
 651             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 652               "$$@" $$unique; \
 653           else \
 654             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 655               $$unique; \
 656           fi; \
 657         fi
 658 ctags: ctags-recursive
 659
 660 CTAGS: ctags
 661 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 662         $(am__define_uniq_tagged_files); \
 663         test -z "$(CTAGS_ARGS)$$unique" \
 664           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 665              $$unique
 666
 667 GTAGS:
 668         here=`$(am__cd) $(top_builddir) && pwd` \
 669           && $(am__cd) $(top_srcdir) \
 670           && gtags -i $(GTAGS_ARGS) "$$here"
 671 cscope: cscope.files
 672         test ! -s cscope.files \
 673           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 674 clean-cscope:
 675         -rm -f cscope.files
 676 cscope.files: clean-cscope cscopelist
 677 cscopelist: cscopelist-recursive
 678
 679 cscopelist-am: $(am__tagged_files)
 680         list='$(am__tagged_files)'; \
 681         case "$(srcdir)" in \
 682           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 683           *) sdir=$(subdir)/$(srcdir) ;; \
 684         esac; \
 685         for i in $$list; do \
 686           if test -f "$$i"; then \
 687             echo "$(subdir)/$$i"; \
 688           else \
 689             echo "$$sdir/$$i"; \
 690           fi; \
 691         done >> $(top_builddir)/cscope.files
 692
 693 distclean-tags:
 694         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 695         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 696
 697 distdir: $(DISTFILES)
 698         $(am__remove_distdir)
 699         test -d "$(distdir)" || mkdir "$(distdir)"
 700         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 701         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 702         list='$(DISTFILES)'; \
 703           dist_files=`for file in $$list; do echo $$file; done | \
 704           sed -e "s|^$$srcdirstrip/||;t" \
 705               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 706         case $$dist_files in \
 707           */*) $(MKDIR_P) `echo "$$dist_files" | \
 708                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 709                            sort -u` ;; \
 710         esac; \
 711         for file in $$dist_files; do \
 712           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 713           if test -d $$d/$$file; then \
 714             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 715             if test -d "$(distdir)/$$file"; then \
 716               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 717             fi; \
 718             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 719               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 720               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 721             fi; \
 722             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 723           else \
 724             test -f "$(distdir)/$$file" \
 725             || cp -p $$d/$$file "$(distdir)/$$file" \
 726             || exit 1; \
 727           fi; \
 728         done
 729         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 730           if test "$$subdir" = .; then :; else \
 731             $(am__make_dryrun) \
 732               || test -d "$(distdir)/$$subdir" \
 733               || $(MKDIR_P) "$(distdir)/$$subdir" \
 734               || exit 1; \
 735             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 736             $(am__relativize); \
 737             new_distdir=$$reldir; \
 738             dir1=$$subdir; dir2="$(top_distdir)"; \
 739             $(am__relativize); \
 740             new_top_distdir=$$reldir; \
 741             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 742             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 743             ($(am__cd) $$subdir && \
 744               $(MAKE) $(AM_MAKEFLAGS) \
 745                 top_distdir="$$new_top_distdir" \
 746                 distdir="$$new_distdir" \
 747                 am__remove_distdir=: \
 748                 am__skip_length_check=: \
 749                 am__skip_mode_fix=: \
 750                 distdir) \
 751               || exit 1; \
 752           fi; \
 753         done
 754         -test -n "$(am__skip_mode_fix)" \
 755         || find "$(distdir)" -type d ! -perm -755 \
 756                 -exec chmod u+rwx,go+rx {} \; -o \
 757           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 758           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 759           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 760         || chmod -R a+r "$(distdir)"
 761 dist-gzip: distdir
 762         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 763         $(am__post_remove_distdir)
 764 dist-bzip2: distdir
 765         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 766         $(am__post_remove_distdir)
 767
 768 dist-lzip: distdir
 769         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 770         $(am__post_remove_distdir)
 771
 772 dist-xz: distdir
 773         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 774         $(am__post_remove_distdir)
 775
 776 dist-tarZ: distdir
 777         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 778         $(am__post_remove_distdir)
 779
 780 dist-shar: distdir
 781         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 782         $(am__post_remove_distdir)
 783
 784 dist-zip: distdir
 785         -rm -f $(distdir).zip
 786         zip -rq $(distdir).zip $(distdir)
 787         $(am__post_remove_distdir)
 788
 789 dist dist-all:
 790         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 791         $(am__post_remove_distdir)
 792
 793 # This target untars the dist file and tries a VPATH configuration.  Then
 794 # it guarantees that the distribution is self-contained by making another
 795 # tarfile.
 796 distcheck: dist
 797         case '$(DIST_ARCHIVES)' in \
 798         *.tar.gz*) \
 799           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 800         *.tar.bz2*) \
 801           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 802         *.tar.lz*) \
 803           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 804         *.tar.xz*) \
 805           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 806         *.tar.Z*) \
 807           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 808         *.shar.gz*) \
 809           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 810         *.zip*) \
 811           unzip $(distdir).zip ;;\
 812         esac
 813         chmod -R a-w $(distdir)
 814         chmod u+w $(distdir)
 815         mkdir $(distdir)/_build $(distdir)/_inst
 816         chmod a-w $(distdir)
 817         test -d $(distdir)/_build || exit 0; \
 818         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 819           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 820           && am__cwd=`pwd` \
 821           && $(am__cd) $(distdir)/_build \
 822           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 823             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 824             $(DISTCHECK_CONFIGURE_FLAGS) \
 825           && $(MAKE) $(AM_MAKEFLAGS) \
 826           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 827           && $(MAKE) $(AM_MAKEFLAGS) check \
 828           && $(MAKE) $(AM_MAKEFLAGS) install \
 829           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 830           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 831           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 832                 distuninstallcheck \
 833           && chmod -R a-w "$$dc_install_base" \
 834           && ({ \
 835                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 836                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 837                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 838                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 839                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 840               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 841           && rm -rf "$$dc_destdir" \
 842           && $(MAKE) $(AM_MAKEFLAGS) dist \
 843           && rm -rf $(DIST_ARCHIVES) \
 844           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 845           && cd "$$am__cwd" \
 846           || exit 1
 847         $(am__post_remove_distdir)
 848         @(echo "$(distdir) archives ready for distribution: "; \
 849           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 850           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 851 distuninstallcheck:
 852         @test -n '$(distuninstallcheck_dir)' || { \
 853           echo 'ERROR: trying to run $@ with an empty' \
 854                '$$(distuninstallcheck_dir)' >&2; \
 855           exit 1; \
 856         }; \
 857         $(am__cd) '$(distuninstallcheck_dir)' || { \
 858           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 859           exit 1; \
 860         }; \
 861         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 862            || { echo "ERROR: files left after uninstall:" ; \
 863                 if test -n "$(DESTDIR)"; then \
 864                   echo "  (check DESTDIR support)"; \
 865                 fi ; \
 866                 $(distuninstallcheck_listfiles) ; \
 867                 exit 1; } >&2
 868 distcleancheck: distclean
 869         @if test '$(srcdir)' = . ; then \
 870           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 871           exit 1 ; \
 872         fi
 873         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 874           || { echo "ERROR: files left in build directory after distclean:" ; \
 875                $(distcleancheck_listfiles) ; \
 876                exit 1; } >&2
 877 check-am: all-am
 878         $(MAKE) $(AM_MAKEFLAGS) check-local
 879 check: check-recursive
 880 all-am: Makefile $(SCRIPTS) $(DATA) config.h
 881 installdirs: installdirs-recursive
 882 installdirs-am:
 883         for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
 884           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 885         done
 886 install: install-recursive
 887 install-exec: install-exec-recursive
 888 install-data: install-data-recursive
 889 uninstall: uninstall-recursive
 890
 891 install-am: all-am
 892         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 893
 894 installcheck: installcheck-recursive
 895 install-strip:
 896         if test -z '$(STRIP)'; then \
 897           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 898             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 899               install; \
 900         else \
 901           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 902             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 903             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 904         fi
 905 mostlyclean-generic:
 906
 907 clean-generic:
 908
 909 distclean-generic:
 910         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 911         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 912
 913 maintainer-clean-generic:
 914         @echo "This command is intended for maintainers to use"
 915         @echo "it deletes files that may require special tools to rebuild."
 916         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 917 clean: clean-recursive
 918
 919 clean-am: clean-generic clean-libtool mostlyclean-am
 920
 921 distclean: distclean-recursive
 922         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 923         -rm -f Makefile
 924 distclean-am: clean-am distclean-generic distclean-hdr \
 925         distclean-libtool distclean-tags
 926
 927 dvi: dvi-recursive
 928
 929 dvi-am:
 930
 931 html: html-recursive
 932
 933 html-am:
 934
 935 info: info-recursive
 936
 937 info-am:
 938
 939 install-data-am: install-pkgconfigDATA
 940
 941 install-dvi: install-dvi-recursive
 942
 943 install-dvi-am:
 944
 945 install-exec-am: install-binSCRIPTS
 946
 947 install-html: install-html-recursive
 948
 949 install-html-am:
 950
 951 install-info: install-info-recursive
 952
 953 install-info-am:
 954
 955 install-man:
 956
 957 install-pdf: install-pdf-recursive
 958
 959 install-pdf-am:
 960
 961 install-ps: install-ps-recursive
 962
 963 install-ps-am:
 964
 965 installcheck-am:
 966
 967 maintainer-clean: maintainer-clean-recursive
 968         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 969         -rm -rf $(top_srcdir)/autom4te.cache
 970         -rm -f Makefile
 971 maintainer-clean-am: distclean-am maintainer-clean-generic
 972
 973 mostlyclean: mostlyclean-recursive
 974
 975 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 976
 977 pdf: pdf-recursive
 978
 979 pdf-am:
 980
 981 ps: ps-recursive
 982
 983 ps-am:
 984
 985 uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
 986
 987 .MAKE: $(am__recursive_targets) all check-am install-am install-strip
 988
 989 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 990         am--refresh check check-am check-local clean clean-cscope \
 991         clean-generic clean-libtool cscope cscopelist-am ctags \
 992         ctags-am dist dist-all dist-bzip2 dist-gzip dist-lzip \
 993         dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
 994         distclean-generic distclean-hdr distclean-libtool \
 995         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 996         dvi-am html html-am info info-am install install-am \
 997         install-binSCRIPTS install-data install-data-am install-dvi \
 998         install-dvi-am install-exec install-exec-am install-html \
 999         install-html-am install-info install-info-am install-man \
1000         install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1001         install-ps-am install-strip installcheck installcheck-am \
1002         installdirs installdirs-am maintainer-clean \
1003         maintainer-clean-generic mostlyclean mostlyclean-generic \
1004         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
1005         uninstall-am uninstall-binSCRIPTS uninstall-pkgconfigDATA
1006
1007
1008 .PHONY: doc install-doc coverage
1009
1010 # Documentation
1011
1012 doc:
1013         @echo "entering doc/"
1014         make -C doc doc
1015
1016 install-doc:
1017         @echo "entering doc/"
1018         make -C doc install-doc
1019
1020 # Unit tests
1021
1022 @EFL_ENABLE_TESTS_TRUE@check-local:
1023 @EFL_ENABLE_TESTS_TRUE@ @./src/tests/edje_suite
1024
1025 @EFL_ENABLE_TESTS_FALSE@check-local:
1026 @EFL_ENABLE_TESTS_FALSE@        @echo "reconfigure with --enable-tests"
1027
1028 # Coverage report
1029
1030 @EFL_ENABLE_COVERAGE_TRUE@lcov-reset:
1031 @EFL_ENABLE_COVERAGE_TRUE@      @rm -rf $(top_builddir)/coverage
1032 @EFL_ENABLE_COVERAGE_TRUE@      @find $(top_builddir) -name "*.gcda" -delete
1033 @EFL_ENABLE_COVERAGE_TRUE@      @lcov --zerocounters --directory $(top_builddir)
1034
1035 @EFL_ENABLE_COVERAGE_TRUE@lcov-report:
1036 @EFL_ENABLE_COVERAGE_TRUE@      @mkdir $(top_builddir)/coverage
1037 @EFL_ENABLE_COVERAGE_TRUE@      lcov --capture --compat-libtool --output-file $(top_builddir)/coverage/coverage.info --directory $(top_builddir)
1038 @EFL_ENABLE_COVERAGE_TRUE@      lcov --remove $(top_builddir)/coverage/coverage.info '*.h' --output-file $(top_builddir)/coverage/coverage.cleaned.info
1039 @EFL_ENABLE_COVERAGE_TRUE@      genhtml -t "$(PACKAGE_STRING)" -o $(top_builddir)/coverage/html $(top_builddir)/coverage/coverage.cleaned.info
1040 @EFL_ENABLE_COVERAGE_TRUE@      @echo "Coverage Report at $(top_builddir)/coverage/html"
1041
1042 @EFL_ENABLE_COVERAGE_TRUE@coverage:
1043 @EFL_ENABLE_COVERAGE_TRUE@      @$(MAKE) lcov-reset
1044 @EFL_ENABLE_COVERAGE_TRUE@      @$(MAKE) check
1045 @EFL_ENABLE_COVERAGE_TRUE@      @$(MAKE) lcov-report
1046 @EFL_ENABLE_COVERAGE_FALSE@lcov-reset:
1047 @EFL_ENABLE_COVERAGE_FALSE@     @echo "reconfigure with --enable-coverage"
1048
1049 @EFL_ENABLE_COVERAGE_FALSE@lcov-report:
1050 @EFL_ENABLE_COVERAGE_FALSE@     @echo "reconfigure with --enable-coverage"
1051
1052 @EFL_ENABLE_COVERAGE_FALSE@coverage:
1053 @EFL_ENABLE_COVERAGE_FALSE@     @echo "reconfigure with --enable-tests --enable-coverage"
1054
1055 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1056 # Otherwise a system limit (for SysV at least) may be exceeded.
1057 .NOEXPORT: