+++ /dev/null
-#***************************************************************************
-# _ _ ____ _
-# Project ___| | | | _ \| |
-# / __| | | | |_) | |
-# | (__| |_| | _ <| |___
-# \___|\___/|_| \_\_____|
-#
-# Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
-#
-# This software is licensed as described in the file COPYING, which
-# you should have received as part of this distribution. The terms
-# are also available at https://curl.haxx.se/docs/copyright.html.
-#
-# You may opt to use, copy, modify, merge, publish, distribute and/or sell
-# copies of the Software, and permit persons to whom the Software is
-# furnished to do so, under the terms of the COPYING file.
-#
-# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
-# KIND, either express or implied.
-#
-###########################################################################
-
-VC=vc6
-
-all:
- ./configure
- make
-
-ssl:
- ./configure --with-ssl
- make
-
-borland:
- cd lib
- $(MAKE) -f Makefile.b32
- cd ..\src
- $(MAKE) -f Makefile.b32
-
-borland-ssl:
- cd lib
- $(MAKE) -f Makefile.b32 WITH_SSL=1
- cd ..\src
- $(MAKE) -f Makefile.b32 WITH_SSL=1
-
-borland-ssl-zlib:
- cd lib
- $(MAKE) -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
- cd ..\src
- $(MAKE) -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
-
-borland-clean:
- cd lib
- $(MAKE) -f Makefile.b32 clean
- cd ..\src
- $(MAKE) -f Makefile.b32 clean
-
-watcom: .SYMBOLIC
- cd lib && $(MAKE) -u -f Makefile.Watcom
- cd src && $(MAKE) -u -f Makefile.Watcom
-
-watcom-clean: .SYMBOLIC
- cd lib && $(MAKE) -u -f Makefile.Watcom clean
- cd src && $(MAKE) -u -f Makefile.Watcom clean
-
-watcom-vclean: .SYMBOLIC
- cd lib && $(MAKE) -u -f Makefile.Watcom vclean
- cd src && $(MAKE) -u -f Makefile.Watcom vclean
-
-mingw32:
- $(MAKE) -C lib -f Makefile.m32
- $(MAKE) -C src -f Makefile.m32
-
-mingw32-clean:
- $(MAKE) -C lib -f Makefile.m32 clean
- $(MAKE) -C src -f Makefile.m32 clean
- $(MAKE) -C docs/examples -f Makefile.m32 clean
-
-mingw32-vclean mingw32-distclean:
- $(MAKE) -C lib -f Makefile.m32 vclean
- $(MAKE) -C src -f Makefile.m32 vclean
- $(MAKE) -C docs/examples -f Makefile.m32 vclean
-
-mingw32-examples%:
- $(MAKE) -C docs/examples -f Makefile.m32 CFG=$@
-
-mingw32%:
- $(MAKE) -C lib -f Makefile.m32 CFG=$@
- $(MAKE) -C src -f Makefile.m32 CFG=$@
-
-vc-clean: $(VC)
- cd lib
- nmake -f Makefile.$(VC) clean
- cd ..\src
- nmake -f Makefile.$(VC) clean
-
-vc-all: $(VC)
- cd lib
- nmake -f Makefile.$(VC) cfg=release
- nmake -f Makefile.$(VC) cfg=release-ssl
- nmake -f Makefile.$(VC) cfg=release-zlib
- nmake -f Makefile.$(VC) cfg=release-ssl-zlib
- nmake -f Makefile.$(VC) cfg=release-ssl-dll
- nmake -f Makefile.$(VC) cfg=release-zlib-dll
- nmake -f Makefile.$(VC) cfg=release-ssl-dll-zlib-dll
- nmake -f Makefile.$(VC) cfg=release-dll
- nmake -f Makefile.$(VC) cfg=release-dll-ssl-dll
- nmake -f Makefile.$(VC) cfg=release-dll-zlib-dll
- nmake -f Makefile.$(VC) cfg=release-dll-ssl-dll-zlib-dll
- nmake -f Makefile.$(VC) cfg=debug
- nmake -f Makefile.$(VC) cfg=debug-ssl
- nmake -f Makefile.$(VC) cfg=debug-zlib
- nmake -f Makefile.$(VC) cfg=debug-ssl-zlib
- nmake -f Makefile.$(VC) cfg=debug-ssl-dll
- nmake -f Makefile.$(VC) cfg=debug-zlib-dll
- nmake -f Makefile.$(VC) cfg=debug-ssl-dll-zlib-dll
- nmake -f Makefile.$(VC) cfg=debug-dll
- nmake -f Makefile.$(VC) cfg=debug-dll-ssl-dll
- nmake -f Makefile.$(VC) cfg=debug-dll-zlib-dll
- nmake -f Makefile.$(VC) cfg=debug-dll-ssl-dll-zlib-dll
-
-vc: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release
- cd ..\src
- nmake /f Makefile.$(VC)
-
-vc-x64: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release
-
-vc-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release WINDOWS_SSPI=1
-
-vc-x64-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release WINDOWS_SSPI=1
-
-vc-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release USE_IDN=1
-
-vc-x64-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release USE_IDN=1
-
-vc-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release USE_IDN=1 WINDOWS_SSPI=1
-
-vc-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-zlib
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-zlib
-
-vc-x64-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib
-
-vc-zlib-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-zlib WINDOWS_SSPI=1
-
-vc-x64-zlib-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib WINDOWS_SSPI=1
-
-vc-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-zlib USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-zlib USE_IDN=1
-
-vc-x64-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib USE_IDN=1
-
-vc-zlib-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-zlib-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-ssl: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl
-
-vc-x64-ssl: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl
-
-vc-ssl-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl WINDOWS_SSPI=1
-
-vc-x64-ssl-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl WINDOWS_SSPI=1
-
-vc-ssl-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl USE_IDN=1
-
-vc-x64-ssl-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl USE_IDN=1
-
-vc-ssl-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-ssl-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl USE_IDN=1 WINDOWS_SSPI=1
-
-vc-ssl-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib
-
-vc-x64-ssl-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib
-
-vc-ssl-zlib-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib WINDOWS_SSPI=1
-
-vc-x64-ssl-zlib-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib WINDOWS_SSPI=1
-
-vc-ssl-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib USE_IDN=1
-
-vc-x64-ssl-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib USE_IDN=1
-
-vc-ssl-zlib-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-ssl-zlib-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-ssl-ssh2-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib
-
-vc-x64-ssl-ssh2-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib
-
-vc-ssl-ssh2-zlib-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib WINDOWS_SSPI=1
-
-vc-x64-ssl-ssh2-zlib-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib WINDOWS_SSPI=1
-
-vc-ssl-ssh2-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib USE_IDN=1
-
-vc-x64-ssl-ssh2-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib USE_IDN=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib USE_IDN=1
-
-vc-ssl-ssh2-zlib-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-ssh2-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-ssl-ssh2-zlib-idn-sspi: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-ssl-ssh2-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-winssl: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-winssl WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-winssl WINDOWS_SSPI=1
-
-vc-x64-winssl: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl WINDOWS_SSPI=1
-
-vc-winssl-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-winssl USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-winssl USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-winssl-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl USE_IDN=1 WINDOWS_SSPI=1
-
-vc-winssl-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-winssl-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-winssl-zlib WINDOWS_SSPI=1
-
-vc-x64-winssl-zlib: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl-zlib WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl-zlib WINDOWS_SSPI=1
-
-vc-winssl-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-winssl-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-winssl-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-x64-winssl-zlib-idn: $(VC)
- cd lib
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl-zlib USE_IDN=1 WINDOWS_SSPI=1
- cd ..\src
- nmake /f Makefile.$(VC) MACHINE=x64 cfg=release-winssl-zlib USE_IDN=1 WINDOWS_SSPI=1
-
-vc-ssl-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-dll
-
-vc-dll-ssl-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll
-
-vc-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-dll
-
-vc-dll-zlib-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-dll-zlib-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-dll-zlib-dll
-
-vc-dll-ssl-dll-zlib-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll-zlib-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-dll-ssl-dll-zlib-dll
-
-vc-ssl-dll-zlib-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-ssl-dll-zlib-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-ssl-dll-zlib-dll
-
-vc-zlib-dll: $(VC)
- cd lib
- nmake /f Makefile.$(VC) cfg=release-zlib-dll
- cd ..\src
- nmake /f Makefile.$(VC) cfg=release-zlib-dll
-
-djgpp:
- $(MAKE) -C lib -f Makefile.dj
- $(MAKE) -C src -f Makefile.dj
-
-cygwin:
- ./configure
- make
-
-cygwin-ssl:
- ./configure --with-ssl
- make
-
-amiga:
- cd ./lib && make -f makefile.amiga
- cd ./src && make -f makefile.amiga
-
-netware:
- $(MAKE) -C lib -f Makefile.netware
- $(MAKE) -C src -f Makefile.netware
-
-netware-clean:
- $(MAKE) -C lib -f Makefile.netware clean
- $(MAKE) -C src -f Makefile.netware clean
- $(MAKE) -C docs/examples -f Makefile.netware clean
-
-netware-vclean netware-distclean:
- $(MAKE) -C lib -f Makefile.netware vclean
- $(MAKE) -C src -f Makefile.netware vclean
- $(MAKE) -C docs/examples -f Makefile.netware vclean
-
-netware-install:
- $(MAKE) -C lib -f Makefile.netware install
- $(MAKE) -C src -f Makefile.netware install
-
-netware-examples-%:
- $(MAKE) -C docs/examples -f Makefile.netware CFG=$@
-
-netware-%:
- $(MAKE) -C lib -f Makefile.netware CFG=$@
- $(MAKE) -C src -f Makefile.netware CFG=$@
-
-unix: all
-
-unix-ssl: ssl
-
-linux: all
-
-linux-ssl: ssl
-
-# We don't need to do anything for vc6.
-vc6:
-
-# VC7 makefiles are for use with VS.NET and VS.NET 2003
-vc7: lib/Makefile.vc7 src/Makefile.vc7
-
-lib/Makefile.vc7: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s/VC6/VC7/g" lib/Makefile.vc6 > lib/Makefile.vc7
-
-src/Makefile.vc7: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s/VC6/VC7/g" src/Makefile.vc6 > src/Makefile.vc7
-
-# VC8 makefiles are for use with VS2005
-vc8: lib/Makefile.vc8 src/Makefile.vc8
-
-lib/Makefile.vc8: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" lib/Makefile.vc6 > lib/Makefile.vc8
-
-src/Makefile.vc8: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib bufferoverflowu.lib/g" -e "s/VC6/VC8/g" src/Makefile.vc6 > src/Makefile.vc8
-
-# VC9 makefiles are for use with VS2008
-vc9: lib/Makefile.vc9 src/Makefile.vc9
-
-lib/Makefile.vc9: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" lib/Makefile.vc6 > lib/Makefile.vc9
-
-src/Makefile.vc9: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc9/g" -e "s/VC6/VC9/g" src/Makefile.vc6 > src/Makefile.vc9
-
-# VC10 makefiles are for use with VS2010
-vc10: lib/Makefile.vc10 src/Makefile.vc10
-
-lib/Makefile.vc10: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc10/g" -e "s/VC6/VC10/g" lib/Makefile.vc6 > lib/Makefile.vc10
-
-src/Makefile.vc10: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc10/g" -e "s/VC6/VC10/g" src/Makefile.vc6 > src/Makefile.vc10
-
-# VC11 makefiles are for use with VS2012
-vc11: lib/Makefile.vc11 src/Makefile.vc11
-
-lib/Makefile.vc11: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc11/g" -e "s/VC6/VC11/g" lib/Makefile.vc6 > lib/Makefile.vc11
-
-src/Makefile.vc11: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc11/g" -e "s/VC6/VC11/g" src/Makefile.vc6 > src/Makefile.vc11
-
-# VC12 makefiles are for use with VS2013
-vc12: lib/Makefile.vc12 src/Makefile.vc12
-
-lib/Makefile.vc12: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc12/g" -e "s/VC6/VC12/g" lib/Makefile.vc6 > lib/Makefile.vc12
-
-src/Makefile.vc12: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc12/g" -e "s/VC6/VC12/g" src/Makefile.vc6 > src/Makefile.vc12
-
-# VC14 makefiles are for use with VS2015
-vc14: lib/Makefile.vc14 src/Makefile.vc14
-
-lib/Makefile.vc14: lib/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc14/g" -e "s/VC6/VC14/g" lib/Makefile.vc6 > lib/Makefile.vc14
-
-src/Makefile.vc14: src/Makefile.vc6
- @echo "generate $@"
- @sed -e "s#/GX /DWIN32 /YX#/EHsc /DWIN32#" -e "s#/GZ#/RTC1#" -e "s/ws2_32.lib/ws2_32.lib/g" -e "s/vc6/vc14/g" -e "s/VC6/VC14/g" src/Makefile.vc6 > src/Makefile.vc14
-
-ca-bundle: lib/mk-ca-bundle.pl
- @echo "generate a fresh ca-bundle.crt"
- @perl $< -b -l -u lib/ca-bundle.crt
-
-ca-firefox: lib/firefox-db2pem.sh
- @echo "generate a fresh ca-bundle.crt"
- ./lib/firefox-db2pem.sh lib/ca-bundle.crt
+++ /dev/null
-# generated automatically by aclocal 1.15 -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# Copyright (C) 2002-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.15'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.15], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.15])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-# Expand $ac_aux_dir to an absolute path.
-am_aux_dir=`cd "$ac_aux_dir" && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
- [$1], [CXX], [depcc="$CXX" am_compiler_list=],
- [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
- [$1], [UPC], [depcc="$UPC" am_compiler_list=],
- [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
- [--enable-dependency-tracking],
- [do not reject slow dependency extractors])
-AS_HELP_STRING(
- [--disable-dependency-tracking],
- [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Older Autoconf quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
-m4_define([AC_PROG_CC],
-m4_defn([AC_PROG_CC])
-[_AM_PROG_CC_C_O
-])
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
- [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
- m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
- [ok:ok],,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target (and possibly the TAP driver). The
-# system "awk" is bad on some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES([CC])],
- [m4_define([AC_PROG_CC],
- m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES([CXX])],
- [m4_define([AC_PROG_CXX],
- m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES([OBJC])],
- [m4_define([AC_PROG_OBJC],
- m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
- [_AM_DEPENDENCIES([OBJCXX])],
- [m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-
-# POSIX will say in a future version that running "rm -f" with no argument
-# is OK; and we want to be able to make that assumption in our Makefile
-# recipes. So use an aggressive probe to check that the usage we want is
-# actually supported "in the wild" to an acceptable degree.
-# See automake bug#10828.
-# To make any issue more visible, cause the running configure to be aborted
-# by default if the 'rm' program in use doesn't match our expectations; the
-# user can still override this though.
-if rm -f && rm -fr && rm -rf; then : OK; else
- cat >&2 <<'END'
-Oops!
-
-Your 'rm' program seems unable to run without file operands specified
-on the command line, even when the '-f' option is present. This is contrary
-to the behaviour of most rm programs out there, and not conforming with
-the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
-
-Please tell bug-automake@gnu.org about your system, including the value
-of your $PATH and any error possibly output before this message. This
-can help us improve future automake versions.
-
-END
- if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
- echo 'Configuration will proceed anyway, since you have set the' >&2
- echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
- echo >&2
- else
- cat >&2 <<'END'
-Aborting the configuration process, to ensure you take notice of the issue.
-
-You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
-
-If you want to complete the configuration process using your problematic
-'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
-to "yes", and re-run configure.
-
-END
- AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
- fi
-fi
-dnl The trailing newline in this macro's definition is deliberate, for
-dnl backward compatibility and to allow trailing 'dnl'-style comments
-dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
- [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
- am_maintainer_other[ make rules and dependencies not useful
- (and sometimes confusing) to the casual installer])],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
-]
-)
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
- am_missing_run="$MISSING "
-else
- am_missing_run=
- AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_CC_C_O
-# ---------------
-# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
-# to automatically call this.
-AC_DEFUN([_AM_PROG_CC_C_O],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-AC_LANG_PUSH([C])dnl
-AC_CACHE_CHECK(
- [whether $CC understands -c and -o together],
- [am_cv_prog_cc_c_o],
- [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
- # Make sure it works both with $CC and with simple cc.
- # Following AC_PROG_CC_C_O, we do the test twice because some
- # compilers refuse to overwrite an existing .o file with -o,
- # though they will create one.
- am_cv_prog_cc_c_o=yes
- for am_i in 1 2; do
- if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
- && test -f conftest2.$ac_objext; then
- : OK
- else
- am_cv_prog_cc_c_o=no
- break
- fi
- done
- rm -f core conftest*
- unset am_i])
-if test "$am_cv_prog_cc_c_o" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
-fi
-AC_LANG_POP([C])])
-
-# For backward compatibility.
-AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_RUN_LOG(COMMAND)
-# -------------------
-# Run COMMAND, save the exit status in ac_status, and log it.
-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
-AC_DEFUN([AM_RUN_LOG],
-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
- ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- (exit $ac_status); }])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
- alias in your environment])
- fi
- if test "$[2]" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
- [AC_MSG_CHECKING([that generated files are newer than configure])
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
- [--enable-silent-rules],
- [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
- [--disable-silent-rules],
- [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
- yes) AM_DEFAULT_VERBOSITY=0;;
- no) AM_DEFAULT_VERBOSITY=1;;
- *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
- [am_cv_make_support_nested_variables],
- [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
- @$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
- am_cv_make_support_nested_variables=yes
-else
- am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
- dnl Using '$V' instead of '$(V)' breaks IRIX make.
- AM_V='$(V)'
- AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
- AM_V=$AM_DEFAULT_VERBOSITY
- AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
- [m4_case([$1],
- [ustar],
- [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
- # There is notably a 21 bits limit for the UID and the GID. In fact,
- # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
- # and bug#13588).
- am_max_uid=2097151 # 2^21 - 1
- am_max_gid=$am_max_uid
- # The $UID and $GID variables are not portable, so we need to resort
- # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
- # below are definitely unexpected, so allow the users to see them
- # (that is, avoid stderr redirection).
- am_uid=`id -u || echo unknown`
- am_gid=`id -g || echo unknown`
- AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
- if test $am_uid -le $am_max_uid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi
- AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
- if test $am_gid -le $am_max_gid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi],
-
- [pax],
- [],
-
- [m4_fatal([Unknown tar format])])
-
- AC_MSG_CHECKING([how to create a $1 tar archive])
-
- # Go ahead even if we have the value already cached. We do so because we
- # need to set the values for the 'am__tar' and 'am__untar' variables.
- _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
- for _am_tool in $_am_tools; do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar; do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works.
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- AM_RUN_LOG([cat conftest.dir/file])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
- done
- rm -rf conftest.dir
-
- AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
- AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/curl-compilers.m4])
-m4_include([m4/curl-confopts.m4])
-m4_include([m4/curl-functions.m4])
-m4_include([m4/curl-openssl.m4])
-m4_include([m4/curl-override.m4])
-m4_include([m4/curl-reentrant.m4])
-m4_include([m4/libtool.m4])
-m4_include([m4/ltoptions.m4])
-m4_include([m4/ltsugar.m4])
-m4_include([m4/ltversion.m4])
-m4_include([m4/lt~obsolete.m4])
-m4_include([m4/xc-am-iface.m4])
-m4_include([m4/xc-cc-check.m4])
-m4_include([m4/xc-lt-iface.m4])
-m4_include([m4/xc-translit.m4])
-m4_include([m4/xc-val-flgs.m4])
-m4_include([m4/zz40-xc-ovr.m4])
-m4_include([m4/zz50-xc-ovr.m4])
-m4_include([m4/zz60-xc-ovr.m4])
-m4_include([acinclude.m4])
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2013-05-30.07; # UTC
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'. Note that this directory component will
-# be either empty or ending with a '/' character. This is deliberate.
-set_dir_from ()
-{
- case $1 in
- */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
- *) dir=;;
- esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
- base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
- echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
- # If the compiler actually managed to produce a dependency file,
- # post-process it.
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependency.h'.
- # Do two passes, one to just change these to
- # $object: dependency.h
- # and one to simply output
- # dependency.h:
- # which is needed to avoid the deleted-header problem.
- { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
- sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
- } > "$depfile"
- rm -f "$tmpdepfile"
- else
- make_dummy_depfile
- fi
-}
-
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say). Also, it might not be
-## supported by the other compilers which use the 'gcc' depmode.
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The second -e expression handles DOS-style file names with drive
- # letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
-## Some versions of gcc put a space before the ':'. On the theory
-## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
- # dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
- | tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
- # The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- make_dummy_depfile
- fi
- rm -f "$tmpdepfile"
- ;;
-
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- set_dir_from "$object"
- set_base_from "$object"
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
- "$@" -Wc,-M
- else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
- "$@" -M
- fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- aix_post_process_depfile
- ;;
-
-tcc)
- # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
- # FIXME: That version still under development at the moment of writing.
- # Make that this statement remains true also for stable, released
- # versions.
- # It will wrap lines (doesn't matter whether long or short) with a
- # trailing '\', as in:
- #
- # foo.o : \
- # foo.c \
- # foo.h \
- #
- # It will put a trailing '\' even on the last line, and will use leading
- # spaces rather than leading tabs (at least since its commit 0394caf7
- # "Emit spaces for -MD").
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
- # We have to change lines of the first kind to '$object: \'.
- sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
- # And for each line of the second kind, we have to emit a 'dep.h:'
- # dummy dependency, to avoid the deleted-header problem.
- sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file. A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
- # Portland's C compiler understands '-MD'.
- # Will always output deps to 'file.d' where file is the root name of the
- # source file under compilation, even if file resides in a subdirectory.
- # The object file name does not affect the name of the '.d' file.
- # pgcc 10.2 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\' :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- set_dir_from "$object"
- # Use the source, not the object, to determine the base name, since
- # that's sadly what pgcc will do too.
- set_base_from "$source"
- tmpdepfile=$base.d
-
- # For projects that build the same source file twice into different object
- # files, the pgcc approach of using the *source* file root name can cause
- # problems in parallel builds. Use a locking strategy to avoid stomping on
- # the same $tmpdepfile.
- lockdir=$base.d-lock
- trap "
- echo '$0: caught signal, cleaning up...' >&2
- rmdir '$lockdir'
- exit 1
- " 1 2 13 15
- numtries=100
- i=$numtries
- while test $i -gt 0; do
- # mkdir is a portable test-and-set.
- if mkdir "$lockdir" 2>/dev/null; then
- # This process acquired the lock.
- "$@" -MD
- stat=$?
- # Release the lock.
- rmdir "$lockdir"
- break
- else
- # If the lock is being held by a different process, wait
- # until the winning process is done or we timeout.
- while test -d "$lockdir" && test $i -gt 0; do
- sleep 1
- i=`expr $i - 1`
- done
- fi
- i=`expr $i - 1`
- done
- trap - 1 2 13 15
- if test $i -le 0; then
- echo "$0: failed to acquire lock after $numtries attempts" >&2
- echo "$0: check lockdir '$lockdir'" >&2
- exit 1
- fi
-
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- set_dir_from "$object"
- set_base_from "$object"
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- make_dummy_depfile
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- set_dir_from "$object"
- set_base_from "$object"
-
- if test "$libtool" = yes; then
- # Libtool generates 2 separate objects for the 2 libraries. These
- # two compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir$base.o.d # libtool 1.5
- tmpdepfile2=$dir.libs/$base.o.d # Likewise.
- tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- # Same post-processing that is required for AIX mode.
- aix_post_process_depfile
- ;;
-
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- echo >> "$depfile" # make sure the fragment doesn't end with a backslash
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
- "$@" $dashmflag |
- sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this sed invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no eat=no
- for arg
- do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- if test $eat = yes; then
- eat=no
- continue
- fi
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process the last invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed '1,2d' "$tmpdepfile" \
- | tr ' ' "$nl" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E \
- | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- | sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- IFS=" "
- for arg
- do
- case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End: