ENH: add some cmake docs and fix build with socklen_t

diff --git a/CMake/CheckTypeSize.c.in b/CMake/CheckTypeSize.c.in
index 8c9a016..ba8d304 100644 (file)
--- a/CMake/CheckTypeSize.c.in
+++ b/CMake/CheckTypeSize.c.in
@@ -6,6 +6,12 @@
 #  include <sys/types.h>
 #endif /* HAVE_SYS_TYPES_H */
 
+
+#ifdef _WIN32
+#  include <ws2tcpip.h>
+#endif
+
+
 #ifdef HAVE_STDINT_H
 #  include <stdint.h>
 #endif /* HAVE_STDINT_H */

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 1ffc328..f21c1c6 100644 (file)
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -17,7 +17,6 @@
 # To check:
 # (From Daniel Stenberg) The cmake build selected to run gcc with -fPIC on my box while the plain configure script did not.
 # (From Daniel Stenberg) The gcc command line use neither -g nor any -O options. As a developer, I also treasure our configure scripts's --enable-debug option that sets a long range of "picky" compiler options.
-
 CMAKE_MINIMUM_REQUIRED(VERSION 2.6.2 FATAL_ERROR)
 SET(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/CMake;${CMAKE_MODULE_PATH}")
 INCLUDE(Utilities)
@@ -642,7 +641,6 @@ ENDFOREACH(CURL_TEST)
 IF(HAVE_FILE_OFFSET_BITS)
   SET(_FILE_OFFSET_BITS 64)
 ENDIF(HAVE_FILE_OFFSET_BITS)
-
 FOREACH(CURL_TEST 
     HAVE_GLIBC_STRERROR_R
     HAVE_POSIX_STRERROR_R
@@ -748,6 +746,14 @@ IF(CMAKE_COMPILER_IS_GNUCC AND APPLE)
   ENDIF(HAVE_C_FLAG_Wno_long_double)
 ENDIF(CMAKE_COMPILER_IS_GNUCC AND APPLE)
 
+IF(HAVE_SOCKLEN_T)
+  SET(CURL_TYPEOF_CURL_SOCKLEN_T "socklen_t")
+  CHECK_TYPE_SIZE("socklen_t" CURL_SIZEOF_CURL_SOCKLEN_T)
+ELSE()
+  SET(CURL_TYPEOF_CURL_SOCKLEN_T int)
+  SET(CURL_SIZEOF_CURL_SOCKLEN_T ${SIZEOF_INT})
+ENDIF()
+
 INCLUDE(CMake/OtherTests.cmake)
 
 ADD_DEFINITIONS(-DHAVE_CONFIG_H)

diff --git a/docs/INSTALL.cmake b/docs/INSTALL.cmake
new file mode 100755 (executable)
index 0000000..d9f1e79
--- /dev/null
+++ b/docs/INSTALL.cmake
@@ -0,0 +1,65 @@
+                                  _   _ ____  _
+                              ___| | | |  _ \| |
+                             / __| | | | |_) | |
+                            | (__| |_| |  _ <| |___
+                             \___|\___/|_| \_\_____|
+
+                                How To Compile with CMake
+
+Building with CMake
+==========================
+   This document describes how to compile, build and install curl and libcurl
+   from source code using the CMake build tool. To build with CMake, you will
+   of course have to first install CMake.  The minimum required version of
+   CMake is specifed in the file CMakeLists.txt found in the top of the curl
+   source tree. Once the correct version of CMake is installed you can follow
+   the instructions below for the platform you are building on.
+  
+   CMake builds can be configured either from the command line, or from one
+   of CMake's GUI's.  
+
+Command Line CMake
+==================
+   A command line build of Curl is similar to the autotools build of Curl. It
+   consists of the following steps after you have unpacked the source.
+       # 1st create an out of source build tree parallel to the curl source
+       # tree and change into that directory
+       mkdir curl-build
+       cd curl-build
+       # now run CMake from the build tree, giving it the path to the top of
+       # the Curl source tree.  CMake will pick a compiler for you. If you
+       # want to specifiy the compile, you can set the CC environment
+       # variable prior to running CMake.
+       cmake ../curl  
+       make
+       # currently make test and make install are not implemented
+       #make test
+       #make install
+
+ccmake
+=========
+     CMake comes with a curses based interface called ccmake.  To run ccmake on
+     a curl use the instructions for the command line cmake, but substitue
+     ccmake ../curl for cmake ../curl.  This will bring up a curses interface
+     with instructions on the bottom of the screen. You can press the "c" key
+     to configure the project, and the "g" key to generate the project. After
+     the project is generated, you can run make.
+
+cmake-gui
+=========
+     CMake also comes with a Qt based GUI called cmake-gui. To configure with
+     cmake-gui, you run cmake-gui and follow these steps:
+        1. Fill in the "Where is the source code" combo box with the path to
+        the curl source tree.
+        2. Fill in the "Where to build the binaries" combo box with the path
+        to the directory for your build tree, ideally this should not be the
+        same as the source tree, but a parallel diretory called curl-build or
+        something similar.  
+        3. Once the source and binary directories are specified, press the
+        "Configure" button.
+        4. Select the native build tool that you want to use.  
+        5. At this point you can change any of the options presented in the
+        GUI.  Once you have selected all the options you want, click the
+        "Generate" button. 
+        6. Run the native build tool that you used CMake to genratate.
+        

diff --git a/docs/README.cmake b/docs/README.cmake
new file mode 100755 (executable)
index 0000000..7129b79
--- /dev/null
+++ b/docs/README.cmake
@@ -0,0 +1,16 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+README.cmake
+  Read the README file first.
+
+  Curl contains CMake build files that provide a way to build Curl with the
+  CMake build tool (www.cmake.org). CMake is a cross platform meta build tool
+  that generates native makefiles and IDE project files. The CMake build
+  system can be used to build Curl on any of its supported platforms. 
+
+  Read the INSTALL.cmake file for instructions on how to compile curl with
+  CMake.  

diff --git a/include/curl/curlbuild.h.cmake b/include/curl/curlbuild.h.cmake
index 07fcc1a..0173a21 100644 (file)
--- a/include/curl/curlbuild.h.cmake
+++ b/include/curl/curlbuild.h.cmake
@@ -63,6 +63,15 @@
    Error Compilation_aborted_CURL_SIZEOF_LONG_already_defined
 #endif
 
+#ifdef CURL_TYPEOF_CURL_SOCKLEN_T
+#  error "CURL_TYPEOF_CURL_SOCKLEN_T shall not be defined except in curlbuild.h"
+   Error Compilation_aborted_CURL_TYPEOF_CURL_SOCKLEN_T_already_defined
+#endif
+
+#ifdef CURL_SIZEOF_CURL_SOCKLEN_T
+#  error "CURL_SIZEOF_CURL_SOCKLEN_T shall not be defined except in curlbuild.h"
+   Error Compilation_aborted_CURL_SIZEOF_CURL_SOCKLEN_T_already_defined
+#endif
 #ifdef CURL_TYPEOF_CURL_OFF_T
 #  error "CURL_TYPEOF_CURL_OFF_T shall not be defined except in curlbuild.h"
    Error Compilation_aborted_CURL_TYPEOF_CURL_OFF_T_already_defined
@@ -126,6 +135,20 @@
 /* The size of `long', as computed by sizeof. */
 #cmakedefine CURL_SIZEOF_LONG ${CURL_SIZEOF_LONG}
 
+/* Integral data type used for curl_socklen_t. */
+#cmakedefine CURL_TYPEOF_CURL_SOCKLEN_T ${CURL_TYPEOF_CURL_SOCKLEN_T}
+
+/* on windows socklen_t is in here */
+#ifdef _WIN32
+#  include <ws2tcpip.h>
+#endif
+
+/* Data type definition of curl_socklen_t. */
+typedef CURL_TYPEOF_CURL_SOCKLEN_T curl_socklen_t;
+
+/* The size of `curl_socklen_t', as computed by sizeof. */
+#cmakedefine CURL_SIZEOF_CURL_SOCKLEN_T ${CURL_SIZEOF_CURL_SOCKLEN_T}
+
 /* Signed integral data type used for curl_off_t. */
 #cmakedefine CURL_TYPEOF_CURL_OFF_T ${CURL_TYPEOF_CURL_OFF_T}