1 /***************************************************************************
3 * Project ___| | | | _ \| |
5 * | (__| |_| | _ <| |___
6 * \___|\___/|_| \_\_____|
8 * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
10 * This software is licensed as described in the file COPYING, which
11 * you should have received as part of this distribution. The terms
12 * are also available at http://curl.haxx.se/docs/copyright.html.
14 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
15 * copies of the Software, and permit persons to whom the Software is
16 * furnished to do so, under the terms of the COPYING file.
18 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
19 * KIND, either express or implied.
21 ***************************************************************************/
22 #include "tool_setup.h"
30 #elif defined(HAVE_SYS_UTIME_H)
31 # include <sys/utime.h>
38 #ifdef HAVE_NETINET_TCP_H
39 # include <netinet/tcp.h>
48 #define ENABLE_CURLX_PRINTF
49 /* use our own printf() functions */
52 #include "tool_binmode.h"
53 #include "tool_cfgable.h"
54 #include "tool_cb_dbg.h"
55 #include "tool_cb_hdr.h"
56 #include "tool_cb_prg.h"
57 #include "tool_cb_rea.h"
58 #include "tool_cb_see.h"
59 #include "tool_cb_wrt.h"
60 #include "tool_dirhie.h"
61 #include "tool_doswin.h"
62 #include "tool_easysrc.h"
63 #include "tool_getparam.h"
64 #include "tool_helpers.h"
65 #include "tool_homedir.h"
66 #include "tool_libinfo.h"
67 #include "tool_main.h"
68 #include "tool_metalink.h"
69 #include "tool_msgs.h"
70 #include "tool_operate.h"
71 #include "tool_operhlp.h"
72 #include "tool_paramhlp.h"
73 #include "tool_parsecfg.h"
74 #include "tool_setopt.h"
75 #include "tool_sleep.h"
76 #include "tool_urlglob.h"
77 #include "tool_util.h"
78 #include "tool_writeenv.h"
79 #include "tool_writeout.h"
80 #include "tool_xattr.h"
82 #include "tool_help.h"
83 #include "tool_hugehelp.h"
85 #include "memdebug.h" /* keep this as LAST include */
88 /* libcurl's debug builds provide an extra function */
89 CURLcode curl_easy_perform_ev(CURL *easy);
92 #define CURLseparator "--_curl_--"
95 /* since O_BINARY as used in bitmasks, setting it to zero makes it usable in
96 source code but yet it doesn't ruin anything */
100 #define CURL_CA_CERT_ERRORMSG1 \
101 "More details here: http://curl.haxx.se/docs/sslcerts.html\n\n" \
102 "curl performs SSL certificate verification by default, " \
103 "using a \"bundle\"\n" \
104 " of Certificate Authority (CA) public keys (CA certs). If the default\n" \
105 " bundle file isn't adequate, you can specify an alternate file\n" \
106 " using the --cacert option.\n"
108 #define CURL_CA_CERT_ERRORMSG2 \
109 "If this HTTPS server uses a certificate signed by a CA represented in\n" \
110 " the bundle, the certificate verification probably failed due to a\n" \
111 " problem with the certificate (it might be expired, or the name might\n" \
112 " not match the domain name in the URL).\n" \
113 "If you'd like to turn off curl's verification of the certificate, use\n" \
114 " the -k (or --insecure) option.\n"
116 static bool is_fatal_error(CURLcode code)
119 /* TODO: Should CURLE_SSL_CACERT be included as critical error ? */
120 case CURLE_FAILED_INIT:
121 case CURLE_OUT_OF_MEMORY:
122 case CURLE_UNKNOWN_OPTION:
123 case CURLE_FUNCTION_NOT_FOUND:
124 case CURLE_BAD_FUNCTION_ARGUMENT:
131 /* no error or not critical */
137 * get_vms_file_size does what it takes to get the real size of the file
139 * For fixed files, find out the size of the EOF block and adjust.
141 * For all others, have to read the entire file in, discarding the contents.
142 * Most posted text files will be small, and binary files like zlib archives
143 * and CD/DVD images should be either a STREAM_LF format or a fixed format.
146 static curl_off_t vms_realfilesize(const char * name,
147 const struct_stat * stat_buf)
154 file = fopen(name, "r");
160 while(ret_stat > 0) {
161 ret_stat = fread(buffer, 1, sizeof(buffer), file);
172 * VmsSpecialSize checks to see if the stat st_size can be trusted and
173 * if not to call a routine to get the correct size.
176 static curl_off_t VmsSpecialSize(const char * name,
177 const struct_stat * stat_buf)
179 switch(stat_buf->st_fab_rfm) {
182 return vms_realfilesize(name, stat_buf);
185 return stat_buf->st_size;
190 static CURLcode operate_do(struct GlobalConfig *global,
191 struct OperationConfig *config)
193 char errorbuffer[CURL_ERROR_SIZE];
194 struct ProgressData progressbar;
195 struct getout *urlnode;
197 struct HdrCbData hdrcbdata;
198 struct OutStruct heads;
200 metalinkfile *mlfile_last = NULL;
202 CURL *curl = config->easy;
203 char *httpgetfields = NULL;
205 CURLcode res = CURLE_OK;
208 /* Save the values of noprogress and isatty to restore them later on */
209 bool orig_noprogress = global->noprogress;
210 bool orig_isatty = global->isatty;
212 errorbuffer[0] = '\0';
214 /* default headers output stream is stdout */
215 memset(&hdrcbdata, 0, sizeof(struct HdrCbData));
216 memset(&heads, 0, sizeof(struct OutStruct));
217 heads.stream = stdout;
218 heads.config = config;
221 ** Beyond this point no return'ing from this function allowed.
222 ** Jump to label 'quit_curl' in order to abandon this function
223 ** from outside of nested loops further down below.
226 /* Check we have a url */
227 if(!config->url_list || !config->url_list->url) {
228 helpf(global->errors, "no URL specified!\n");
229 res = CURLE_FAILED_INIT;
233 /* On WIN32 we can't set the path to curl-ca-bundle.crt
234 * at compile time. So we look here for the file in two ways:
235 * 1: look at the environment variable CURL_CA_BUNDLE for a path
236 * 2: if #1 isn't found, use the windows API function SearchPath()
237 * to find it along the app's path (includes app's dir and CWD)
239 * We support the environment variable thing for non-Windows platforms
240 * too. Just for the sake of it.
242 if(!config->cacert &&
244 !config->insecure_ok) {
246 env = curlx_getenv("CURL_CA_BUNDLE");
248 config->cacert = strdup(env);
249 if(!config->cacert) {
251 helpf(global->errors, "out of memory\n");
252 res = CURLE_OUT_OF_MEMORY;
257 env = curlx_getenv("SSL_CERT_DIR");
259 config->capath = strdup(env);
260 if(!config->capath) {
262 helpf(global->errors, "out of memory\n");
263 res = CURLE_OUT_OF_MEMORY;
268 env = curlx_getenv("SSL_CERT_FILE");
270 config->cacert = strdup(env);
271 if(!config->cacert) {
273 helpf(global->errors, "out of memory\n");
274 res = CURLE_OUT_OF_MEMORY;
285 res = FindWin32CACert(config, "curl-ca-bundle.crt");
292 if(config->postfields) {
293 if(config->use_httpget) {
294 /* Use the postfields data for a http get */
295 httpgetfields = strdup(config->postfields);
296 Curl_safefree(config->postfields);
298 helpf(global->errors, "out of memory\n");
299 res = CURLE_OUT_OF_MEMORY;
302 if(SetHTTPrequest(config,
303 (config->no_body?HTTPREQ_HEAD:HTTPREQ_GET),
305 res = CURLE_FAILED_INIT;
310 if(SetHTTPrequest(config, HTTPREQ_SIMPLEPOST, &config->httpreq)) {
311 res = CURLE_FAILED_INIT;
317 /* Single header file for all URLs */
318 if(config->headerfile) {
319 /* open file for output: */
320 if(!curlx_strequal(config->headerfile, "-")) {
321 FILE *newfile = fopen(config->headerfile, "wb");
323 warnf(config, "Failed to open %s\n", config->headerfile);
324 res = CURLE_WRITE_ERROR;
328 heads.filename = config->headerfile;
329 heads.s_isreg = TRUE;
330 heads.fopened = TRUE;
331 heads.stream = newfile;
335 /* always use binary mode for protocol header output */
336 set_binmode(heads.stream);
341 ** Nested loops start here.
344 /* loop through the list of given URLs */
346 for(urlnode = config->url_list; urlnode; urlnode = urlnode->next) {
348 unsigned long up; /* upload file counter within a single upload glob */
349 char *infiles; /* might be a glob pattern */
351 unsigned long infilenum;
354 int metalink = 0; /* nonzero for metalink download. */
355 metalinkfile *mlfile;
356 metalink_resource *mlres;
362 if(urlnode->flags & GETOUT_METALINK) {
364 if(mlfile_last == NULL) {
365 mlfile_last = config->metalinkfile_list;
367 mlfile = mlfile_last;
368 mlfile_last = mlfile_last->next;
369 mlres = mlfile->resource;
376 /* urlnode->url is the full URL (it might be NULL) */
379 /* This node has no URL. Free node data without destroying the
380 node itself nor modifying next pointer and continue to next */
381 Curl_safefree(urlnode->outfile);
382 Curl_safefree(urlnode->infile);
384 continue; /* next URL please */
387 /* save outfile pattern before expansion */
388 if(urlnode->outfile) {
389 outfiles = strdup(urlnode->outfile);
391 helpf(global->errors, "out of memory\n");
392 res = CURLE_OUT_OF_MEMORY;
397 infiles = urlnode->infile;
399 if(!config->globoff && infiles) {
400 /* Unless explicitly shut off */
401 res = (CURLcode) glob_url(&inglob, infiles, &infilenum,
402 global->showerror?global->errors:NULL);
404 Curl_safefree(outfiles);
409 /* Here's the loop for uploading multiple files within the same
410 single globbed string. If no upload, we enter the loop once anyway. */
411 for(up = 0 ; up < infilenum; up++) {
413 char *uploadfile; /* a single file, never a glob */
416 unsigned long urlnum;
426 res = (CURLcode) glob_next_url(&uploadfile, inglob);
427 if(res == CURLE_OUT_OF_MEMORY)
428 helpf(global->errors, "out of memory\n");
431 uploadfile = strdup(infiles);
433 helpf(global->errors, "out of memory\n");
434 res = CURLE_OUT_OF_MEMORY;
444 /* For Metalink download, we don't use glob. Instead we use
445 the number of resources as urlnum. */
446 urlnum = count_next_metalink_resource(mlfile);
449 if(!config->globoff) {
450 /* Unless explicitly shut off, we expand '{...}' and '[...]'
451 expressions and return total number of URLs in pattern set */
452 res = (CURLcode) glob_url(&urls, urlnode->url, &urlnum,
453 global->showerror?global->errors:NULL);
455 Curl_safefree(uploadfile);
460 urlnum = 1; /* without globbing, this is a single URL */
462 /* if multiple files extracted to stdout, insert separators! */
463 separator= ((!outfiles || curlx_strequal(outfiles, "-")) && urlnum > 1);
465 /* Here's looping around each globbed URL */
466 for(li = 0 ; li < urlnum; li++) {
471 struct OutStruct outs;
472 struct InStruct input;
473 struct timeval retrystart;
474 curl_off_t uploadfilesize;
475 long retry_numretries;
476 long retry_sleep_default;
478 char *this_url = NULL;
479 int metalink_next_res = 0;
484 uploadfilesize = -1; /* -1 means unknown */
486 /* default output stream is stdout */
487 memset(&outs, 0, sizeof(struct OutStruct));
488 outs.stream = stdout;
489 outs.config = config;
492 /* For Metalink download, use name in Metalink file as
494 outfile = strdup(mlfile->filename);
496 res = CURLE_OUT_OF_MEMORY;
499 this_url = strdup(mlres->url);
501 res = CURLE_OUT_OF_MEMORY;
507 res = (CURLcode) glob_next_url(&this_url, urls);
512 this_url = strdup(urlnode->url);
514 res = CURLE_OUT_OF_MEMORY;
524 outfile = strdup(outfiles);
526 res = CURLE_OUT_OF_MEMORY;
532 if(((urlnode->flags&GETOUT_USEREMOTE) ||
533 (outfile && !curlx_strequal("-", outfile))) &&
534 (metalink || !config->use_metalink)) {
537 * We have specified a file name to store the result in, or we have
538 * decided we want to use the remote file name.
542 /* extract the file name from the URL */
543 res = get_url_file_name(&outfile, this_url);
546 if((!outfile || !*outfile) && !config->content_disposition) {
547 helpf(global->errors, "Remote file name has no length!\n");
548 res = CURLE_WRITE_ERROR;
551 #if defined(MSDOS) || defined(WIN32)
552 /* For DOS and WIN32, we do some major replacing of
553 bad characters in the file name before using it */
554 outfile = sanitize_dos_name(outfile);
556 res = CURLE_OUT_OF_MEMORY;
559 #endif /* MSDOS || WIN32 */
562 /* fill '#1' ... '#9' terms from URL pattern */
563 char *storefile = outfile;
564 res = (CURLcode) glob_match_url(&outfile, storefile, urls);
565 Curl_safefree(storefile);
568 warnf(config, "bad output glob!\n");
573 /* Create the directory hierarchy, if not pre-existent to a multiple
576 if(config->create_dirs || metalink) {
577 res = create_dir_hierarchy(outfile, global->errors);
578 /* create_dir_hierarchy shows error upon CURLE_WRITE_ERROR */
579 if(res == CURLE_WRITE_ERROR)
586 if((urlnode->flags & GETOUT_USEREMOTE)
587 && config->content_disposition) {
588 /* Our header callback MIGHT set the filename */
589 DEBUGASSERT(!outs.filename);
592 if(config->resume_from_current) {
593 /* We're told to continue from where we are now. Get the size
594 of the file as it is now and open it for append instead */
595 struct_stat fileinfo;
596 /* VMS -- Danger, the filesize is only valid for stream files */
597 if(0 == stat(outfile, &fileinfo))
598 /* set offset to current file size: */
599 config->resume_from = fileinfo.st_size;
601 /* let offset be 0 */
602 config->resume_from = 0;
605 if(config->resume_from) {
607 /* open file for output, forcing VMS output format into stream
608 mode which is needed for stat() call above to always work. */
609 FILE *file = fopen(outfile, config->resume_from?"ab":"wb",
610 "ctx=stm", "rfm=stmlf", "rat=cr", "mrs=0");
612 /* open file for output: */
613 FILE *file = fopen(outfile, config->resume_from?"ab":"wb");
616 helpf(global->errors, "Can't open '%s'!\n", outfile);
617 res = CURLE_WRITE_ERROR;
622 outs.init = config->resume_from;
625 outs.stream = NULL; /* open when needed */
627 outs.filename = outfile;
631 if(uploadfile && !stdin_upload(uploadfile)) {
633 * We have specified a file to upload and it isn't "-".
635 struct_stat fileinfo;
637 this_url = add_file_name_to_url(curl, this_url, uploadfile);
639 res = CURLE_OUT_OF_MEMORY;
644 * Reading binary from files can be a problem... Only FIXED, VAR
645 * etc WITHOUT implied CC will work Others need a \n appended to a
648 * - Stat gives a size but this is UNRELIABLE in VMS As a f.e. a
649 * fixed file with implied CC needs to have a byte added for every
650 * record processed, this can by derived from Filesize & recordsize
651 * for VARiable record files the records need to be counted! for
652 * every record add 1 for linefeed and subtract 2 for the record
653 * header for VARIABLE header files only the bare record data needs
654 * to be considered with one appended if implied CC
657 /* Calculate the real upload site for VMS */
659 if(stat(uploadfile, &fileinfo) == 0) {
660 fileinfo.st_size = VmsSpecialSize(uploadfile, &fileinfo);
661 switch (fileinfo.st_fab_rfm) {
665 infd = open(uploadfile, O_RDONLY | O_BINARY);
668 infd = open(uploadfile, O_RDONLY | O_BINARY,
669 "rfm=stmlf", "ctx=stm");
674 infd = open(uploadfile, O_RDONLY | O_BINARY);
675 if((infd == -1) || fstat(infd, &fileinfo))
678 helpf(global->errors, "Can't open '%s'!\n", uploadfile);
683 res = CURLE_READ_ERROR;
688 /* we ignore file size for char/block devices, sockets, etc. */
689 if(S_ISREG(fileinfo.st_mode))
690 uploadfilesize = fileinfo.st_size;
693 else if(uploadfile && stdin_upload(uploadfile)) {
694 /* count to see if there are more than one auth bit set
695 in the authtype field */
698 while(bitcheck < 32) {
699 if(config->authtype & (1UL << bitcheck++)) {
702 /* more than one, we're done! */
709 * If the user has also selected --anyauth or --proxy-anyauth
710 * we should warn him/her.
712 if(config->proxyanyauth || (authbits>1)) {
714 "Using --anyauth or --proxy-anyauth with upload from stdin"
715 " involves a big risk of it not working. Use a temporary"
716 " file or a fixed auth type instead!\n");
719 DEBUGASSERT(infdopen == FALSE);
720 DEBUGASSERT(infd == STDIN_FILENO);
723 if(curlx_strequal(uploadfile, ".")) {
724 if(curlx_nonblock((curl_socket_t)infd, TRUE) < 0)
726 "fcntl failed on fd=%d: %s\n", infd, strerror(errno));
730 if(uploadfile && config->resume_from_current)
731 config->resume_from = -1; /* -1 will then force get-it-yourself */
733 if(output_expected(this_url, uploadfile) && outs.stream &&
734 isatty(fileno(outs.stream)))
735 /* we send the output to a tty, therefore we switch off the progress
737 global->noprogress = global->isatty = TRUE;
739 /* progress meter is per download, so restore config
741 global->noprogress = orig_noprogress;
742 global->isatty = orig_isatty;
745 if(urlnum > 1 && !global->mute) {
746 fprintf(global->errors, "\n[%lu/%lu]: %s --> %s\n",
747 li+1, urlnum, this_url, outfile ? outfile : "<stdout>");
749 printf("%s%s\n", CURLseparator, this_url);
753 /* Find out whether the url contains a file name */
754 const char *pc = strstr(this_url, "://");
761 pc = strrchr(pc, '/'); /* check for a slash */
764 /* there is a slash present in the URL */
767 /* Ouch, there's already a question mark in the URL string, we
768 then append the data with an ampersand separator instead! */
772 * Then append ? followed by the get fields to the url.
775 urlbuffer = aprintf("%s%c%s", this_url, sep, httpgetfields);
777 /* Append / before the ? to create a well-formed url
778 if the url contains a hostname only
780 urlbuffer = aprintf("%s/?%s", this_url, httpgetfields);
783 res = CURLE_OUT_OF_MEMORY;
787 Curl_safefree(this_url); /* free previous URL */
788 this_url = urlbuffer; /* use our new URL instead! */
792 global->errors = stderr;
794 if((!outfile || !strcmp(outfile, "-")) && !config->use_ascii) {
795 /* We get the output to stdout and we have not got the ASCII/text
796 flag, then set stdout to be binary */
800 if(config->tcp_nodelay)
801 my_setopt(curl, CURLOPT_TCP_NODELAY, 1L);
804 my_setopt(curl, CURLOPT_WRITEDATA, &outs);
805 if(metalink || !config->use_metalink)
806 /* what call to write */
807 my_setopt(curl, CURLOPT_WRITEFUNCTION, tool_write_cb);
810 /* Set Metalink specific write callback function to parse
811 XML data progressively. */
812 my_setopt(curl, CURLOPT_WRITEFUNCTION, metalink_write_cb);
813 #endif /* USE_METALINK */
817 input.config = config;
818 /* Note that if CURLOPT_READFUNCTION is fread (the default), then
819 * lib/telnet.c will Curl_poll() on the input file descriptor
820 * rather then calling the READFUNCTION at regular intervals.
821 * The circumstances in which it is preferable to enable this
822 * behaviour, by omitting to set the READFUNCTION & READDATA options,
823 * have not been determined.
825 my_setopt(curl, CURLOPT_READDATA, &input);
826 /* what call to read */
827 my_setopt(curl, CURLOPT_READFUNCTION, tool_read_cb);
829 /* in 7.18.0, the CURLOPT_SEEKFUNCTION/DATA pair is taking over what
830 CURLOPT_IOCTLFUNCTION/DATA pair previously provided for seeking */
831 my_setopt(curl, CURLOPT_SEEKDATA, &input);
832 my_setopt(curl, CURLOPT_SEEKFUNCTION, tool_seek_cb);
834 if(config->recvpersecond)
835 /* tell libcurl to use a smaller sized buffer as it allows us to
836 make better sleeps! 7.9.9 stuff! */
837 my_setopt(curl, CURLOPT_BUFFERSIZE, (long)config->recvpersecond);
839 /* size of uploaded file: */
840 if(uploadfilesize != -1)
841 my_setopt(curl, CURLOPT_INFILESIZE_LARGE, uploadfilesize);
842 my_setopt_str(curl, CURLOPT_URL, this_url); /* what to fetch */
843 my_setopt(curl, CURLOPT_NOPROGRESS, global->noprogress?1L:0L);
844 if(config->no_body) {
845 my_setopt(curl, CURLOPT_NOBODY, 1L);
846 my_setopt(curl, CURLOPT_HEADER, 1L);
848 /* If --metalink is used, we ignore --include (headers in
849 output) option because mixing headers to the body will
850 confuse XML parser and/or hash check will fail. */
851 else if(!config->use_metalink)
852 my_setopt(curl, CURLOPT_HEADER, config->include_headers?1L:0L);
854 if(config->xoauth2_bearer)
855 my_setopt_str(curl, CURLOPT_XOAUTH2_BEARER, config->xoauth2_bearer);
857 #if !defined(CURL_DISABLE_PROXY)
859 /* TODO: Make this a run-time check instead of compile-time one. */
861 my_setopt_str(curl, CURLOPT_PROXY, config->proxy);
862 my_setopt_str(curl, CURLOPT_PROXYUSERPWD, config->proxyuserpwd);
864 /* new in libcurl 7.3 */
865 my_setopt(curl, CURLOPT_HTTPPROXYTUNNEL, config->proxytunnel?1L:0L);
867 /* new in libcurl 7.5 */
869 my_setopt_enum(curl, CURLOPT_PROXYTYPE, (long)config->proxyver);
871 /* new in libcurl 7.10 */
872 if(config->socksproxy) {
873 my_setopt_str(curl, CURLOPT_PROXY, config->socksproxy);
874 my_setopt_enum(curl, CURLOPT_PROXYTYPE, (long)config->socksver);
877 /* new in libcurl 7.10.6 */
878 if(config->proxyanyauth)
879 my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
881 else if(config->proxynegotiate)
882 my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
883 (long)CURLAUTH_GSSNEGOTIATE);
884 else if(config->proxyntlm)
885 my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
886 (long)CURLAUTH_NTLM);
887 else if(config->proxydigest)
888 my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
889 (long)CURLAUTH_DIGEST);
890 else if(config->proxybasic)
891 my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
892 (long)CURLAUTH_BASIC);
894 /* new in libcurl 7.19.4 */
895 my_setopt(curl, CURLOPT_NOPROXY, config->noproxy);
899 my_setopt(curl, CURLOPT_FAILONERROR, config->failonerror?1L:0L);
900 my_setopt(curl, CURLOPT_UPLOAD, uploadfile?1L:0L);
901 my_setopt(curl, CURLOPT_DIRLISTONLY, config->dirlistonly?1L:0L);
902 my_setopt(curl, CURLOPT_APPEND, config->ftp_append?1L:0L);
904 if(config->netrc_opt)
905 my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_OPTIONAL);
906 else if(config->netrc || config->netrc_file)
907 my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_REQUIRED);
909 my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_IGNORED);
911 if(config->netrc_file)
912 my_setopt(curl, CURLOPT_NETRC_FILE, config->netrc_file);
914 my_setopt(curl, CURLOPT_TRANSFERTEXT, config->use_ascii?1L:0L);
915 if(config->login_options)
916 my_setopt_str(curl, CURLOPT_LOGIN_OPTIONS, config->login_options);
917 my_setopt_str(curl, CURLOPT_USERPWD, config->userpwd);
918 my_setopt_str(curl, CURLOPT_RANGE, config->range);
919 my_setopt(curl, CURLOPT_ERRORBUFFER, errorbuffer);
920 my_setopt(curl, CURLOPT_TIMEOUT_MS, (long)(config->timeout * 1000));
922 if(built_in_protos & CURLPROTO_HTTP) {
926 my_setopt(curl, CURLOPT_FOLLOWLOCATION,
927 config->followlocation?1L:0L);
928 my_setopt(curl, CURLOPT_UNRESTRICTED_AUTH,
929 config->unrestricted_auth?1L:0L);
931 switch(config->httpreq) {
932 case HTTPREQ_SIMPLEPOST:
933 my_setopt_str(curl, CURLOPT_POSTFIELDS,
935 my_setopt(curl, CURLOPT_POSTFIELDSIZE_LARGE,
936 config->postfieldsize);
939 my_setopt_httppost(curl, CURLOPT_HTTPPOST, config->httppost);
945 my_setopt_str(curl, CURLOPT_REFERER, config->referer);
946 my_setopt(curl, CURLOPT_AUTOREFERER, config->autoreferer?1L:0L);
947 my_setopt_str(curl, CURLOPT_USERAGENT, config->useragent);
948 my_setopt_slist(curl, CURLOPT_HTTPHEADER, config->headers);
950 /* new in libcurl 7.36.0 */
951 if(config->proxyheaders) {
952 my_setopt_slist(curl, CURLOPT_PROXYHEADER, config->proxyheaders);
953 my_setopt(curl, CURLOPT_HEADEROPT, CURLHEADER_SEPARATE);
956 /* new in libcurl 7.5 */
957 my_setopt(curl, CURLOPT_MAXREDIRS, config->maxredirs);
959 /* new in libcurl 7.9.1 */
960 if(config->httpversion)
961 my_setopt_enum(curl, CURLOPT_HTTP_VERSION, config->httpversion);
963 /* new in libcurl 7.10.6 (default is Basic) */
965 my_setopt_bitmask(curl, CURLOPT_HTTPAUTH, (long)config->authtype);
967 /* curl 7.19.1 (the 301 version existed in 7.18.2),
968 303 was added in 7.26.0 */
970 postRedir |= CURL_REDIR_POST_301;
972 postRedir |= CURL_REDIR_POST_302;
974 postRedir |= CURL_REDIR_POST_303;
975 my_setopt(curl, CURLOPT_POSTREDIR, postRedir);
977 /* new in libcurl 7.21.6 */
979 my_setopt_str(curl, CURLOPT_ACCEPT_ENCODING, "");
981 /* new in libcurl 7.21.6 */
982 if(config->tr_encoding)
983 my_setopt(curl, CURLOPT_TRANSFER_ENCODING, 1L);
985 } /* (built_in_protos & CURLPROTO_HTTP) */
987 my_setopt_str(curl, CURLOPT_FTPPORT, config->ftpport);
988 my_setopt(curl, CURLOPT_LOW_SPEED_LIMIT,
989 config->low_speed_limit);
990 my_setopt(curl, CURLOPT_LOW_SPEED_TIME, config->low_speed_time);
991 my_setopt(curl, CURLOPT_MAX_SEND_SPEED_LARGE,
992 config->sendpersecond);
993 my_setopt(curl, CURLOPT_MAX_RECV_SPEED_LARGE,
994 config->recvpersecond);
996 if(config->use_resume)
997 my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, config->resume_from);
999 my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, CURL_OFF_T_C(0));
1001 my_setopt_str(curl, CURLOPT_SSLCERT, config->cert);
1002 my_setopt_str(curl, CURLOPT_SSLCERTTYPE, config->cert_type);
1003 my_setopt_str(curl, CURLOPT_SSLKEY, config->key);
1004 my_setopt_str(curl, CURLOPT_SSLKEYTYPE, config->key_type);
1005 my_setopt_str(curl, CURLOPT_KEYPASSWD, config->key_passwd);
1007 if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) {
1009 /* SSH and SSL private key uses same command-line option */
1010 /* new in libcurl 7.16.1 */
1011 my_setopt_str(curl, CURLOPT_SSH_PRIVATE_KEYFILE, config->key);
1012 /* new in libcurl 7.16.1 */
1013 my_setopt_str(curl, CURLOPT_SSH_PUBLIC_KEYFILE, config->pubkey);
1015 /* new in libcurl 7.17.1: SSH host key md5 checking allows us
1016 to fail if we are not talking to who we think we should */
1017 my_setopt_str(curl, CURLOPT_SSH_HOST_PUBLIC_KEY_MD5,
1018 config->hostpubmd5);
1022 my_setopt_str(curl, CURLOPT_CAINFO, config->cacert);
1024 my_setopt_str(curl, CURLOPT_CAPATH, config->capath);
1026 my_setopt_str(curl, CURLOPT_CRLFILE, config->crlfile);
1028 if(curlinfo->features & CURL_VERSION_SSL) {
1029 if(config->insecure_ok) {
1030 my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
1031 my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
1034 my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
1035 /* libcurl default is strict verifyhost -> 2L */
1036 /* my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2L); */
1040 if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) {
1041 if(!config->insecure_ok) {
1044 res = CURLE_OUT_OF_MEMORY;
1047 file = aprintf("%s/%sssh/known_hosts", home, DOT_CHAR);
1049 /* new in curl 7.19.6 */
1050 res = res_setopt_str(curl, CURLOPT_SSH_KNOWNHOSTS, file);
1052 if(res == CURLE_UNKNOWN_OPTION)
1053 /* libssh2 version older than 1.1.1 */
1056 Curl_safefree(home);
1063 if(config->no_body || config->remote_time) {
1064 /* no body or use remote time */
1065 my_setopt(curl, CURLOPT_FILETIME, 1L);
1068 my_setopt(curl, CURLOPT_CRLF, config->crlf?1L:0L);
1069 my_setopt_slist(curl, CURLOPT_QUOTE, config->quote);
1070 my_setopt_slist(curl, CURLOPT_POSTQUOTE, config->postquote);
1071 my_setopt_slist(curl, CURLOPT_PREQUOTE, config->prequote);
1073 #if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
1075 my_setopt_str(curl, CURLOPT_COOKIE, config->cookie);
1077 if(config->cookiefile)
1078 my_setopt_str(curl, CURLOPT_COOKIEFILE, config->cookiefile);
1080 /* new in libcurl 7.9 */
1081 if(config->cookiejar)
1082 my_setopt_str(curl, CURLOPT_COOKIEJAR, config->cookiejar);
1084 /* new in libcurl 7.9.7 */
1085 my_setopt(curl, CURLOPT_COOKIESESSION, config->cookiesession?1L:0L);
1087 if(config->cookie || config->cookiefile || config->cookiejar) {
1088 warnf(config, "cookie option(s) used even though cookie support "
1090 return CURLE_NOT_BUILT_IN;
1094 my_setopt_enum(curl, CURLOPT_SSLVERSION, config->ssl_version);
1095 my_setopt_enum(curl, CURLOPT_TIMECONDITION, (long)config->timecond);
1096 my_setopt(curl, CURLOPT_TIMEVALUE, (long)config->condtime);
1097 my_setopt_str(curl, CURLOPT_CUSTOMREQUEST, config->customrequest);
1098 my_setopt(curl, CURLOPT_STDERR, global->errors);
1100 /* three new ones in libcurl 7.3: */
1101 my_setopt_str(curl, CURLOPT_INTERFACE, config->iface);
1102 my_setopt_str(curl, CURLOPT_KRBLEVEL, config->krblevel);
1104 progressbarinit(&progressbar, config);
1105 if((global->progressmode == CURL_PROGRESS_BAR) &&
1106 !global->noprogress && !global->mute) {
1107 /* we want the alternative style, then we have to implement it
1109 my_setopt(curl, CURLOPT_XFERINFOFUNCTION, tool_progress_cb);
1110 my_setopt(curl, CURLOPT_XFERINFODATA, &progressbar);
1113 /* new in libcurl 7.24.0: */
1114 if(config->dns_servers)
1115 my_setopt_str(curl, CURLOPT_DNS_SERVERS, config->dns_servers);
1117 /* new in libcurl 7.33.0: */
1118 if(config->dns_interface)
1119 my_setopt_str(curl, CURLOPT_DNS_INTERFACE, config->dns_interface);
1120 if(config->dns_ipv4_addr)
1121 my_setopt_str(curl, CURLOPT_DNS_LOCAL_IP4, config->dns_ipv4_addr);
1122 if(config->dns_ipv6_addr)
1123 my_setopt_str(curl, CURLOPT_DNS_LOCAL_IP6, config->dns_ipv6_addr);
1125 /* new in libcurl 7.6.2: */
1126 my_setopt_slist(curl, CURLOPT_TELNETOPTIONS, config->telnet_options);
1128 /* new in libcurl 7.7: */
1129 my_setopt_str(curl, CURLOPT_RANDOM_FILE, config->random_file);
1130 my_setopt_str(curl, CURLOPT_EGDSOCKET, config->egd_file);
1131 my_setopt(curl, CURLOPT_CONNECTTIMEOUT_MS,
1132 (long)(config->connecttimeout * 1000));
1134 if(config->cipher_list)
1135 my_setopt_str(curl, CURLOPT_SSL_CIPHER_LIST, config->cipher_list);
1137 /* new in libcurl 7.9.2: */
1138 if(config->disable_epsv)
1140 my_setopt(curl, CURLOPT_FTP_USE_EPSV, 0L);
1142 /* new in libcurl 7.10.5 */
1143 if(config->disable_eprt)
1145 my_setopt(curl, CURLOPT_FTP_USE_EPRT, 0L);
1147 if(global->tracetype != TRACE_NONE) {
1148 my_setopt(curl, CURLOPT_DEBUGFUNCTION, tool_debug_cb);
1149 my_setopt(curl, CURLOPT_DEBUGDATA, config);
1150 my_setopt(curl, CURLOPT_VERBOSE, 1L);
1153 /* new in curl 7.9.3 */
1154 if(config->engine) {
1155 res = res_setopt_str(curl, CURLOPT_SSLENGINE, config->engine);
1158 my_setopt(curl, CURLOPT_SSLENGINE_DEFAULT, 1L);
1161 /* new in curl 7.10.7, extended in 7.19.4 but this only sets 0 or 1 */
1162 my_setopt(curl, CURLOPT_FTP_CREATE_MISSING_DIRS,
1163 config->ftp_create_dirs?1L:0L);
1165 /* new in curl 7.10.8 */
1166 if(config->max_filesize)
1167 my_setopt(curl, CURLOPT_MAXFILESIZE_LARGE,
1168 config->max_filesize);
1170 if(4 == config->ip_version)
1171 my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4);
1172 else if(6 == config->ip_version)
1173 my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6);
1175 my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER);
1177 /* new in curl 7.15.5 */
1178 if(config->ftp_ssl_reqd)
1179 my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);
1181 /* new in curl 7.11.0 */
1182 else if(config->ftp_ssl)
1183 my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_TRY);
1185 /* new in curl 7.16.0 */
1186 else if(config->ftp_ssl_control)
1187 my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_CONTROL);
1189 /* new in curl 7.16.1 */
1190 if(config->ftp_ssl_ccc)
1191 my_setopt_enum(curl, CURLOPT_FTP_SSL_CCC,
1192 (long)config->ftp_ssl_ccc_mode);
1194 #if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI)
1196 /* TODO: Make this a run-time check instead of compile-time one. */
1198 /* new in curl 7.19.4 */
1199 if(config->socks5_gssapi_service)
1200 my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_SERVICE,
1201 config->socks5_gssapi_service);
1203 /* new in curl 7.19.4 */
1204 if(config->socks5_gssapi_nec)
1205 my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_NEC,
1206 config->socks5_gssapi_nec);
1210 my_setopt_str(curl, CURLOPT_FTP_ACCOUNT, config->ftp_account);
1212 my_setopt(curl, CURLOPT_IGNORE_CONTENT_LENGTH, config->ignorecl?1L:0L);
1215 my_setopt(curl, CURLOPT_FTP_SKIP_PASV_IP, config->ftp_skip_ip?1L:0L);
1218 my_setopt(curl, CURLOPT_FTP_FILEMETHOD, (long)config->ftp_filemethod);
1221 if(config->localport) {
1222 my_setopt(curl, CURLOPT_LOCALPORT, (long)config->localport);
1223 my_setopt_str(curl, CURLOPT_LOCALPORTRANGE,
1224 (long)config->localportrange);
1228 my_setopt_str(curl, CURLOPT_FTP_ALTERNATIVE_TO_USER,
1229 config->ftp_alternative_to_user);
1232 if(config->disable_sessionid)
1234 my_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE, 0L);
1238 my_setopt(curl, CURLOPT_HTTP_CONTENT_DECODING, 0L);
1239 my_setopt(curl, CURLOPT_HTTP_TRANSFER_DECODING, 0L);
1243 if(!config->nokeepalive) {
1244 my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 1L);
1245 if(config->alivetime != 0) {
1246 #if !defined(TCP_KEEPIDLE) || !defined(TCP_KEEPINTVL)
1247 warnf(config, "Keep-alive functionality somewhat crippled due to "
1248 "missing support in your operating system!\n");
1250 my_setopt(curl, CURLOPT_TCP_KEEPIDLE, config->alivetime);
1251 my_setopt(curl, CURLOPT_TCP_KEEPINTVL, config->alivetime);
1255 my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 0L);
1258 if(config->tftp_blksize)
1259 my_setopt(curl, CURLOPT_TFTP_BLKSIZE, config->tftp_blksize);
1261 if(config->mail_from)
1262 my_setopt_str(curl, CURLOPT_MAIL_FROM, config->mail_from);
1264 if(config->mail_rcpt)
1265 my_setopt_slist(curl, CURLOPT_MAIL_RCPT, config->mail_rcpt);
1268 if(config->ftp_pret)
1269 my_setopt(curl, CURLOPT_FTP_USE_PRET, 1L);
1271 if(config->proto_present)
1272 my_setopt_flags(curl, CURLOPT_PROTOCOLS, config->proto);
1273 if(config->proto_redir_present)
1274 my_setopt_flags(curl, CURLOPT_REDIR_PROTOCOLS, config->proto_redir);
1276 if(config->content_disposition
1277 && (urlnode->flags & GETOUT_USEREMOTE)
1278 && (checkprefix("http://", this_url) ||
1279 checkprefix("https://", this_url)))
1280 hdrcbdata.honor_cd_filename = TRUE;
1282 hdrcbdata.honor_cd_filename = FALSE;
1284 hdrcbdata.outs = &outs;
1285 hdrcbdata.heads = &heads;
1287 my_setopt(curl, CURLOPT_HEADERFUNCTION, tool_header_cb);
1288 my_setopt(curl, CURLOPT_HEADERDATA, &hdrcbdata);
1292 my_setopt_slist(curl, CURLOPT_RESOLVE, config->resolve);
1295 if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) {
1296 if(config->tls_username)
1297 my_setopt_str(curl, CURLOPT_TLSAUTH_USERNAME,
1298 config->tls_username);
1299 if(config->tls_password)
1300 my_setopt_str(curl, CURLOPT_TLSAUTH_PASSWORD,
1301 config->tls_password);
1302 if(config->tls_authtype)
1303 my_setopt_str(curl, CURLOPT_TLSAUTH_TYPE,
1304 config->tls_authtype);
1308 if(config->gssapi_delegation)
1309 my_setopt_str(curl, CURLOPT_GSSAPI_DELEGATION,
1310 config->gssapi_delegation);
1313 if(config->ssl_allow_beast)
1314 my_setopt(curl, CURLOPT_SSL_OPTIONS, (long)CURLSSLOPT_ALLOW_BEAST);
1316 if(config->mail_auth)
1317 my_setopt_str(curl, CURLOPT_MAIL_AUTH, config->mail_auth);
1321 my_setopt(curl, CURLOPT_SASL_IR, 1L);
1324 my_setopt(curl, CURLOPT_SSL_ENABLE_NPN, 0L);
1327 if(config->noalpn) {
1328 my_setopt(curl, CURLOPT_SSL_ENABLE_ALPN, 0L);
1331 /* initialize retry vars for loop below */
1332 retry_sleep_default = (config->retry_delay) ?
1333 config->retry_delay*1000L : RETRY_SLEEP_DEFAULT; /* ms */
1335 retry_numretries = config->req_retry;
1336 retry_sleep = retry_sleep_default; /* ms */
1337 retrystart = tvnow();
1339 #ifndef CURL_DISABLE_LIBCURL_OPTION
1340 res = easysrc_perform();
1348 if(!metalink && config->use_metalink) {
1349 /* If outs.metalink_parser is non-NULL, delete it first. */
1350 if(outs.metalink_parser)
1351 metalink_parser_context_delete(outs.metalink_parser);
1352 outs.metalink_parser = metalink_parser_context_new();
1353 if(outs.metalink_parser == NULL) {
1354 res = CURLE_OUT_OF_MEMORY;
1357 fprintf(config->global->errors,
1358 "Metalink: parsing (%s) metalink/XML...\n", this_url);
1361 fprintf(config->global->errors,
1362 "Metalink: fetching (%s) from (%s)...\n",
1363 mlfile->filename, this_url);
1364 #endif /* USE_METALINK */
1367 if(config->test_event_based)
1368 res = curl_easy_perform_ev(curl);
1371 res = curl_easy_perform(curl);
1373 if(outs.is_cd_filename && outs.stream && !global->mute &&
1375 printf("curl: Saved to filename '%s'\n", outs.filename);
1377 /* if retry-max-time is non-zero, make sure we haven't exceeded the
1379 if(retry_numretries &&
1380 (!config->retry_maxtime ||
1381 (tvdiff(tvnow(), retrystart) <
1382 config->retry_maxtime*1000L)) ) {
1388 RETRY_LAST /* not used */
1391 if((CURLE_OPERATION_TIMEDOUT == res) ||
1392 (CURLE_COULDNT_RESOLVE_HOST == res) ||
1393 (CURLE_COULDNT_RESOLVE_PROXY == res) ||
1394 (CURLE_FTP_ACCEPT_TIMEOUT == res))
1395 /* retry timeout always */
1396 retry = RETRY_TIMEOUT;
1397 else if((CURLE_OK == res) ||
1398 (config->failonerror &&
1399 (CURLE_HTTP_RETURNED_ERROR == res))) {
1400 /* If it returned OK. _or_ failonerror was enabled and it
1401 returned due to such an error, check for HTTP transient
1402 errors to retry on. */
1403 char *effective_url = NULL;
1404 curl_easy_getinfo(curl, CURLINFO_EFFECTIVE_URL, &effective_url);
1406 checkprefix("http", effective_url)) {
1407 /* This was HTTP(S) */
1408 curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
1411 case 500: /* Internal Server Error */
1412 case 502: /* Bad Gateway */
1413 case 503: /* Service Unavailable */
1414 case 504: /* Gateway Timeout */
1417 * At this point, we have already written data to the output
1418 * file (or terminal). If we write to a file, we must rewind
1419 * or close/re-open the file so that the next attempt starts
1420 * over from the beginning.
1422 * TODO: similar action for the upload case. We might need
1423 * to start over reading from a previous point if we have
1424 * uploaded something when this was returned.
1431 curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
1433 if(response/100 == 4)
1435 * This is typically when the FTP server only allows a certain
1436 * amount of users and we are not one of them. All 4xx codes
1443 static const char * const m[]={
1444 NULL, "timeout", "HTTP error", "FTP error"
1446 warnf(config, "Transient problem: %s "
1447 "Will retry in %ld seconds. "
1448 "%ld retries left.\n",
1449 m[retry], retry_sleep/1000L, retry_numretries);
1451 tool_go_sleep(retry_sleep);
1453 if(!config->retry_delay) {
1455 if(retry_sleep > RETRY_SLEEP_MAX)
1456 retry_sleep = RETRY_SLEEP_MAX;
1458 if(outs.bytes && outs.filename) {
1459 /* We have written data to a output file, we truncate file
1462 fprintf(global->errors, "Throwing away %"
1463 CURL_FORMAT_CURL_OFF_T " bytes\n",
1465 fflush(outs.stream);
1466 /* truncate file at the position where we started appending */
1467 #ifdef HAVE_FTRUNCATE
1468 if(ftruncate( fileno(outs.stream), outs.init)) {
1469 /* when truncate fails, we can't just append as then we'll
1470 create something strange, bail out */
1472 fprintf(global->errors,
1473 "failed to truncate, exiting\n");
1474 res = CURLE_WRITE_ERROR;
1477 /* now seek to the end of the file, the position where we
1478 just truncated the file in a large file-safe way */
1479 fseek(outs.stream, 0, SEEK_END);
1481 /* ftruncate is not available, so just reposition the file
1482 to the location we would have truncated it. This won't
1483 work properly with large files on 32-bit systems, but
1484 most of those will have ftruncate. */
1485 fseek(outs.stream, (long)outs.init, SEEK_SET);
1487 outs.bytes = 0; /* clear for next round */
1489 continue; /* curl_easy_perform loop */
1491 } /* if retry_numretries */
1493 /* Metalink: Decide to try the next resource or
1494 not. Basically, we want to try the next resource if
1495 download was not successful. */
1497 if(CURLE_OK == res) {
1498 /* TODO We want to try next resource when download was
1499 not successful. How to know that? */
1500 char *effective_url = NULL;
1501 curl_easy_getinfo(curl, CURLINFO_EFFECTIVE_URL, &effective_url);
1503 curlx_strnequal(effective_url, "http", 4)) {
1504 /* This was HTTP(S) */
1505 curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
1506 if(response != 200 && response != 206) {
1507 metalink_next_res = 1;
1508 fprintf(global->errors,
1509 "Metalink: fetching (%s) from (%s) FAILED "
1510 "(HTTP status code %d)\n",
1511 mlfile->filename, this_url, response);
1516 metalink_next_res = 1;
1517 fprintf(global->errors,
1518 "Metalink: fetching (%s) from (%s) FAILED (%s)\n",
1519 mlfile->filename, this_url,
1521 errorbuffer : curl_easy_strerror((CURLcode)res));
1524 if(metalink && !metalink_next_res)
1525 fprintf(global->errors, "Metalink: fetching (%s) from (%s) OK\n",
1526 mlfile->filename, this_url);
1528 /* In all ordinary cases, just break out of loop here */
1529 break; /* curl_easy_perform loop */
1533 if((global->progressmode == CURL_PROGRESS_BAR) &&
1535 /* if the custom progress bar has been displayed, we output a
1537 fputs("\n", progressbar.out);
1539 if(config->writeout)
1540 ourWriteOut(curl, &outs, config->writeout);
1542 if(config->writeenv)
1546 ** Code within this loop may jump directly here to label 'show_error'
1547 ** in order to display an error message for CURLcode stored in 'res'
1548 ** variable and exit loop once that necessary writing and cleanup
1549 ** in label 'quit_urls' has been done.
1555 if(is_vms_shell()) {
1556 /* VMS DCL shell behavior */
1557 if(!global->showerror)
1558 vms_show = VMSSTS_HIDE;
1562 if(res && global->showerror) {
1563 fprintf(global->errors, "curl: (%d) %s\n", res, (errorbuffer[0]) ?
1564 errorbuffer : curl_easy_strerror((CURLcode)res));
1565 if(res == CURLE_SSL_CACERT)
1566 fprintf(global->errors, "%s%s",
1567 CURL_CA_CERT_ERRORMSG1, CURL_CA_CERT_ERRORMSG2);
1570 /* Fall through comment to 'quit_urls' label */
1573 ** Upon error condition and always that a message has already been
1574 ** displayed, code within this loop may jump directly here to label
1575 ** 'quit_urls' otherwise it should jump to 'show_error' label above.
1577 ** When 'res' variable is _not_ CURLE_OK loop will exit once that
1578 ** all code following 'quit_urls' has been executed. Otherwise it
1579 ** will loop to the beginning from where it may exit if there are
1580 ** no more urls left.
1585 /* Set file extended attributes */
1586 if(!res && config->xattr && outs.fopened && outs.stream) {
1587 int rc = fwrite_xattr(curl, fileno(outs.stream));
1589 warnf(config, "Error setting extended attributes: %s\n",
1593 /* Close the file */
1594 if(outs.fopened && outs.stream) {
1595 int rc = fclose(outs.stream);
1597 /* something went wrong in the writing process */
1598 res = CURLE_WRITE_ERROR;
1599 fprintf(global->errors, "(%d) Failed writing body\n", res);
1602 else if(!outs.s_isreg && outs.stream) {
1603 /* Dump standard stream buffered data */
1604 int rc = fflush(outs.stream);
1606 /* something went wrong in the writing process */
1607 res = CURLE_WRITE_ERROR;
1608 fprintf(global->errors, "(%d) Failed writing body\n", res);
1613 if(!res && outs.s_isreg && outs.filename) {
1614 /* Set the url (up to 80 chars) as comment for the file */
1615 if(strlen(url) > 78)
1617 SetComment(outs.filename, url);
1622 /* File time can only be set _after_ the file has been closed */
1623 if(!res && config->remote_time && outs.s_isreg && outs.filename) {
1624 /* Ask libcurl if we got a remote file time */
1626 curl_easy_getinfo(curl, CURLINFO_FILETIME, &filetime);
1628 struct utimbuf times;
1629 times.actime = (time_t)filetime;
1630 times.modtime = (time_t)filetime;
1631 utime(outs.filename, ×); /* set the time we got */
1637 if(!metalink && config->use_metalink && res == CURLE_OK) {
1638 int rv = parse_metalink(config, &outs, this_url);
1640 fprintf(config->global->errors, "Metalink: parsing (%s) OK\n",
1643 fprintf(config->global->errors, "Metalink: parsing (%s) FAILED\n",
1646 else if(metalink && res == CURLE_OK && !metalink_next_res) {
1647 int rv = metalink_check_hash(global, mlfile, outs.filename);
1649 metalink_next_res = 1;
1652 #endif /* USE_METALINK */
1654 /* No more business with this output struct */
1655 if(outs.alloc_filename)
1656 Curl_safefree(outs.filename);
1658 if(outs.metalink_parser)
1659 metalink_parser_context_delete(outs.metalink_parser);
1660 #endif /* USE_METALINK */
1661 memset(&outs, 0, sizeof(struct OutStruct));
1662 hdrcbdata.outs = NULL;
1664 /* Free loop-local allocated memory and close loop-local opened fd */
1666 Curl_safefree(outfile);
1667 Curl_safefree(this_url);
1673 /* Should exit if error is fatal. */
1674 if(is_fatal_error(res)) {
1677 if(!metalink_next_res)
1679 mlres = mlres->next;
1681 /* TODO If metalink_next_res is 1 and mlres is NULL,
1682 * set res to error code
1688 /* when url globbing, exit loop upon critical error */
1689 if(is_fatal_error(res))
1693 /* when not url globbing, exit loop upon any error */
1696 } /* loop to the next URL */
1698 /* Free loop-local allocated memory */
1700 Curl_safefree(uploadfile);
1703 /* Free list of remaining URLs */
1709 /* when file globbing, exit loop upon critical error */
1710 if(is_fatal_error(res))
1714 /* when not file globbing, exit loop upon any error */
1717 } /* loop to the next globbed upload file */
1719 /* Free loop-local allocated memory */
1721 Curl_safefree(outfiles);
1724 /* Free list of globbed upload files */
1725 glob_cleanup(inglob);
1729 /* Free this URL node data without destroying the
1730 the node itself nor modifying next pointer. */
1731 Curl_safefree(urlnode->url);
1732 Curl_safefree(urlnode->outfile);
1733 Curl_safefree(urlnode->infile);
1737 ** Bail out upon critical errors
1739 if(is_fatal_error(res))
1742 } /* for-loop through all URLs */
1745 ** Nested loops end here.
1750 /* Reset the global config variables */
1751 global->noprogress = orig_noprogress;
1752 global->isatty = orig_isatty;
1754 /* Free function-local referenced allocated memory */
1755 Curl_safefree(httpgetfields);
1757 /* Free list of given URLs */
1758 clean_getout(config);
1760 hdrcbdata.heads = NULL;
1762 /* Close function-local opened file descriptors */
1763 if(heads.fopened && heads.stream)
1764 fclose(heads.stream);
1766 if(heads.alloc_filename)
1767 Curl_safefree(heads.filename);
1769 /* Release metalink related resources here */
1770 clean_metalink(config);
1775 CURLcode operate(struct GlobalConfig *config, int argc, argv_item_t argv[])
1777 CURLcode result = CURLE_OK;
1779 /* Setup proper locale from environment */
1780 #ifdef HAVE_SETLOCALE
1781 setlocale(LC_ALL, "");
1784 /* Parse .curlrc if necessary */
1785 if((argc == 1) || (!curlx_strequal(argv[1], "-q"))) {
1786 parseconfig(NULL, config); /* ignore possible failure */
1788 /* If we had no arguments then make sure a url was specified in .curlrc */
1789 if((argc < 2) && (!config->first->url_list)) {
1790 helpf(config->errors, NULL);
1791 result = CURLE_FAILED_INIT;
1796 /* Parse the command line arguments */
1797 ParameterError res = parse_args(config, argc, argv);
1801 /* Check if we were asked for the help */
1802 if(res == PARAM_HELP_REQUESTED)
1804 /* Check if we were asked for the manual */
1805 else if(res == PARAM_MANUAL_REQUESTED)
1807 /* Check if we were asked for the version information */
1808 else if(res == PARAM_VERSION_INFO_REQUESTED)
1809 tool_version_info();
1810 /* Check if we were asked to list the SSL engines */
1811 else if(res == PARAM_ENGINES_REQUESTED)
1812 tool_list_engines(config->easy);
1814 result = CURLE_FAILED_INIT;
1817 #ifndef CURL_DISABLE_LIBCURL_OPTION
1818 /* Initialise the libcurl source output */
1819 result = easysrc_init();
1822 /* Perform the main operations */
1825 struct OperationConfig *operation = config->first;
1827 /* Get the required aguments for each operation */
1828 while(!result && operation) {
1829 result = get_args(operation, count++);
1831 operation = operation->next;
1834 /* Set the current operation pointer */
1835 config->current = config->first;
1837 /* Perform each operation */
1838 while(!result && config->current) {
1839 result = operate_do(config, config->current);
1841 config->current = config->current->next;
1844 #ifndef CURL_DISABLE_LIBCURL_OPTION
1845 /* Cleanup the libcurl source output */
1848 /* Dump the libcurl code if previously enabled */
1849 dumpeasysrc(config);
1853 helpf(config->errors, "out of memory\n");