Revert "Update to 7.40.1"

[platform/upstream/curl.git] / docs / libcurl / libcurl-tutorial.3

.\" **************************************************************************
.\" *                                  _   _ ____  _
.\" *  Project                     ___| | | |  _ \| |
.\" *                             / __| | | | |_) | |
.\" *                            | (__| |_| |  _ <| |___
.\" *                             \___|\___/|_| \_\_____|
.\" *
.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
.\" *
.\" * This software is licensed as described in the file COPYING, which
.\" * you should have received as part of this distribution. The terms
.\" * are also available at http://curl.haxx.se/docs/copyright.html.
.\" *
.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
.\" * copies of the Software, and permit persons to whom the Software is
.\" * furnished to do so, under the terms of the COPYING file.
.\" *
.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
.\" * KIND, either express or implied.
.\" *
.\" **************************************************************************
.\"
.TH libcurl-tutorial 3 "4 Mar 2009" "libcurl" "libcurl programming"
.SH NAME
libcurl-tutorial \- libcurl programming tutorial
.SH "Objective"
This document attempts to describe the general principles and some basic
approaches to consider when programming with libcurl. The text will focus
mainly on the C interface but might apply fairly well on other interfaces as
well as they usually follow the C one pretty closely.

This document will refer to 'the user' as the person writing the source code
that uses libcurl. That would probably be you or someone in your position.
What will be generally referred to as 'the program' will be the collected
source code that you write that is using libcurl for transfers. The program
is outside libcurl and libcurl is outside of the program.

To get more details on all options and functions described herein, please
refer to their respective man pages.

.SH "Building"
There are many different ways to build C programs. This chapter will assume a
UNIX-style build process. If you use a different build system, you can still
read this to get general information that may apply to your environment as
well.
.IP "Compiling the Program"
Your compiler needs to know where the libcurl headers are located. Therefore
you must set your compiler's include path to point to the directory where you
installed them. The 'curl-config'[3] tool can be used to get this information:

$ curl-config --cflags

.IP "Linking the Program with libcurl"
When having compiled the program, you need to link your object files to create
a single executable. For that to succeed, you need to link with libcurl and
possibly also with other libraries that libcurl itself depends on. Like the
OpenSSL libraries, but even some standard OS libraries may be needed on the
command line. To figure out which flags to use, once again the 'curl-config'
tool comes to the rescue:

$ curl-config --libs

.IP "SSL or Not"
libcurl can be built and customized in many ways. One of the things that
varies from different libraries and builds is the support for SSL-based
transfers, like HTTPS and FTPS. If a supported SSL library was detected
properly at build-time, libcurl will be built with SSL support. To figure out
if an installed libcurl has been built with SSL support enabled, use
\&'curl-config' like this:

$ curl-config --feature

And if SSL is supported, the keyword 'SSL' will be written to stdout,
possibly together with a few other features that could be either on or off on
for different libcurls.

See also the "Features libcurl Provides" further down.
.IP "autoconf macro"
When you write your configure script to detect libcurl and setup variables
accordingly, we offer a prewritten macro that probably does everything you
need in this area. See docs/libcurl/libcurl.m4 file - it includes docs on how
to use it.

.SH "Portable Code in a Portable World"
The people behind libcurl have put a considerable effort to make libcurl work
on a large amount of different operating systems and environments.

You program libcurl the same way on all platforms that libcurl runs on. There
are only very few minor considerations that differ. If you just make sure to
write your code portable enough, you may very well create yourself a very
portable program. libcurl shouldn't stop you from that.

.SH "Global Preparation"
The program must initialize some of the libcurl functionality globally. That
means it should be done exactly once, no matter how many times you intend to
use the library. Once for your program's entire life time. This is done using

 curl_global_init()

and it takes one parameter which is a bit pattern that tells libcurl what to
initialize. Using \fICURL_GLOBAL_ALL\fP will make it initialize all known
internal sub modules, and might be a good default option. The current two bits
that are specified are:
.RS
.IP "CURL_GLOBAL_WIN32"
which only does anything on Windows machines. When used on
a Windows machine, it'll make libcurl initialize the win32 socket
stuff. Without having that initialized properly, your program cannot use
sockets properly. You should only do this once for each application, so if
your program already does this or of another library in use does it, you
should not tell libcurl to do this as well.
.IP CURL_GLOBAL_SSL
which only does anything on libcurls compiled and built SSL-enabled. On these
systems, this will make libcurl initialize the SSL library properly for this
application. This only needs to be done once for each application so if your
program or another library already does this, this bit should not be needed.
.RE

libcurl has a default protection mechanism that detects if
\fIcurl_global_init(3)\fP hasn't been called by the time
\fIcurl_easy_perform(3)\fP is called and if that is the case, libcurl runs the
function itself with a guessed bit pattern. Please note that depending solely
on this is not considered nice nor very good.

When the program no longer uses libcurl, it should call
\fIcurl_global_cleanup(3)\fP, which is the opposite of the init call. It will
then do the reversed operations to cleanup the resources the
\fIcurl_global_init(3)\fP call initialized.

Repeated calls to \fIcurl_global_init(3)\fP and \fIcurl_global_cleanup(3)\fP
should be avoided. They should only be called once each.

.SH "Features libcurl Provides"
It is considered best-practice to determine libcurl features at run-time
rather than at build-time (if possible of course). By calling
\fIcurl_version_info(3)\fP and checking out the details of the returned
struct, your program can figure out exactly what the currently running libcurl
supports.

.SH "Handle the Easy libcurl"
libcurl first introduced the so called easy interface. All operations in the
easy interface are prefixed with 'curl_easy'.

Recent libcurl versions also offer the multi interface. More about that
interface, what it is targeted for and how to use it is detailed in a separate
chapter further down. You still need to understand the easy interface first,
so please continue reading for better understanding.

To use the easy interface, you must first create yourself an easy handle. You
need one handle for each easy session you want to perform. Basically, you
should use one handle for every thread you plan to use for transferring. You
must never share the same handle in multiple threads.

Get an easy handle with

 easyhandle = curl_easy_init();

It returns an easy handle. Using that you proceed to the next step: setting
up your preferred actions. A handle is just a logic entity for the upcoming
transfer or series of transfers.

You set properties and options for this handle using
\fIcurl_easy_setopt(3)\fP. They control how the subsequent transfer or
transfers will be made. Options remain set in the handle until set again to
something different. Alas, multiple requests using the same handle will use
the same options.

Many of the options you set in libcurl are "strings", pointers to data
terminated with a zero byte. When you set strings with
\fIcurl_easy_setopt(3)\fP, libcurl makes its own copy so that they don't
need to be kept around in your application after being set[4].

One of the most basic properties to set in the handle is the URL. You set your
preferred URL to transfer with \fICURLOPT_URL(3)\fP in a manner similar to:

.nf
 curl_easy_setopt(handle, CURLOPT_URL, "http://domain.com/");
.fi

Let's assume for a while that you want to receive data as the URL identifies a
remote resource you want to get here. Since you write a sort of application
that needs this transfer, I assume that you would like to get the data passed
to you directly instead of simply getting it passed to stdout. So, you write
your own function that matches this prototype:

 size_t write_data(void *buffer, size_t size, size_t nmemb, void *userp);

You tell libcurl to pass all data to this function by issuing a function
similar to this:

 curl_easy_setopt(easyhandle, CURLOPT_WRITEFUNCTION, write_data);

You can control what data your callback function gets in the fourth argument
by setting another property:

 curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct);

Using that property, you can easily pass local data between your application
and the function that gets invoked by libcurl. libcurl itself won't touch the
data you pass with \fICURLOPT_WRITEDATA(3)\fP.

libcurl offers its own default internal callback that will take care of the
data if you don't set the callback with \fICURLOPT_WRITEFUNCTION(3)\fP. It
will then simply output the received data to stdout. You can have the default
callback write the data to a different file handle by passing a 'FILE *' to a
file opened for writing with the \fICURLOPT_WRITEDATA(3)\fP option.

Now, we need to take a step back and have a deep breath. Here's one of those
rare platform-dependent nitpicks. Did you spot it? On some platforms[2],
libcurl won't be able to operate on files opened by the program. Thus, if you
use the default callback and pass in an open file with
\fICURLOPT_WRITEDATA(3)\fP, it will crash. You should therefore avoid this to
make your program run fine virtually everywhere.

(\fICURLOPT_WRITEDATA(3)\fP was formerly known as \fICURLOPT_FILE\fP. Both
names still work and do the same thing).

If you're using libcurl as a win32 DLL, you MUST use the
\fICURLOPT_WRITEFUNCTION(3)\fP if you set \fICURLOPT_WRITEDATA(3)\fP - or you
will experience crashes.

There are of course many more options you can set, and we'll get back to a few
of them later. Let's instead continue to the actual transfer:

 success = curl_easy_perform(easyhandle);

\fIcurl_easy_perform(3)\fP will connect to the remote site, do the necessary
commands and receive the transfer. Whenever it receives data, it calls the
callback function we previously set. The function may get one byte at a time,
or it may get many kilobytes at once. libcurl delivers as much as possible as
often as possible. Your callback function should return the number of bytes it
\&"took care of". If that is not the exact same amount of bytes that was
passed to it, libcurl will abort the operation and return with an error code.

When the transfer is complete, the function returns a return code that informs
you if it succeeded in its mission or not. If a return code isn't enough for
you, you can use the \fICURLOPT_ERRORBUFFER(3)\fP to point libcurl to a buffer
of yours where it'll store a human readable error message as well.

If you then want to transfer another file, the handle is ready to be used
again. Mind you, it is even preferred that you re-use an existing handle if
you intend to make another transfer. libcurl will then attempt to re-use the
previous connection.

For some protocols, downloading a file can involve a complicated process of
logging in, setting the transfer mode, changing the current directory and
finally transferring the file data. libcurl takes care of all that
complication for you. Given simply the URL to a file, libcurl will take care
of all the details needed to get the file moved from one machine to another.

.SH "Multi-threading Issues"
The first basic rule is that you must \fBnever\fP simultaneously share a
libcurl handle (be it easy or multi or whatever) between multiple
threads. Only use one handle in one thread at any time. You can pass the
handles around among threads, but you must never use a single handle from more
than one thread at any given time.

libcurl is completely thread safe, except for two issues: signals and SSL/TLS
handlers. Signals are used for timing out name resolves (during DNS lookup) -
when built without c-ares support and not on Windows.

If you are accessing HTTPS or FTPS URLs in a multi-threaded manner, you are
then of course using the underlying SSL library multi-threaded and those libs
might have their own requirements on this issue. Basically, you need to
provide one or two functions to allow it to function properly. For all
details, see this:

OpenSSL

 http://www.openssl.org/docs/crypto/threads.html#DESCRIPTION

GnuTLS

 http://www.gnu.org/software/gnutls/manual/html_node/Multi_002dthreaded-applications.html

NSS

 is claimed to be thread-safe already without anything required.

PolarSSL

 Required actions unknown.

yassl

 Required actions unknown.

axTLS

 Required actions unknown.

Secure Transport

 The engine is fully thread-safe, and no additional steps are required.

When using multiple threads you should set the \fICURLOPT_NOSIGNAL(3)\fP
option to 1 for all handles. Everything will or might work fine except that
timeouts are not honored during the DNS lookup - which you can work around by
building libcurl with c-ares support. c-ares is a library that provides
asynchronous name resolves. On some platforms, libcurl simply will not
function properly multi-threaded unless this option is set.

Also, note that \fICURLOPT_DNS_USE_GLOBAL_CACHE(3)\fP is not thread-safe.

.SH "When It Doesn't Work"
There will always be times when the transfer fails for some reason. You might
have set the wrong libcurl option or misunderstood what the libcurl option
actually does, or the remote server might return non-standard replies that
confuse the library which then confuses your program.

There's one golden rule when these things occur: set the
\fICURLOPT_VERBOSE(3)\fP option to 1. It'll cause the library to spew out the
entire protocol details it sends, some internal info and some received
protocol data as well (especially when using FTP). If you're using HTTP,
adding the headers in the received output to study is also a clever way to get
a better understanding why the server behaves the way it does. Include headers
in the normal body output with \fICURLOPT_HEADER(3)\fP set 1.

Of course, there are bugs left. We need to know about them to be able to fix
them, so we're quite dependent on your bug reports! When you do report
suspected bugs in libcurl, please include as many details as you possibly can:
a protocol dump that \fICURLOPT_VERBOSE(3)\fP produces, library version, as
much as possible of your code that uses libcurl, operating system name and
version, compiler name and version etc.

If \fICURLOPT_VERBOSE(3)\fP is not enough, you increase the level of debug
data your application receive by using the \fICURLOPT_DEBUGFUNCTION(3)\fP.

Getting some in-depth knowledge about the protocols involved is never wrong,
and if you're trying to do funny things, you might very well understand
libcurl and how to use it better if you study the appropriate RFC documents
at least briefly.

.SH "Upload Data to a Remote Site"
libcurl tries to keep a protocol independent approach to most transfers, thus
uploading to a remote FTP site is very similar to uploading data to a HTTP
server with a PUT request.

Of course, first you either create an easy handle or you re-use one existing
one. Then you set the URL to operate on just like before. This is the remote
URL, that we now will upload.

Since we write an application, we most likely want libcurl to get the upload
data by asking us for it. To make it do that, we set the read callback and
the custom pointer libcurl will pass to our read callback. The read callback
should have a prototype similar to:

 size_t function(char *bufptr, size_t size, size_t nitems, void *userp);

Where bufptr is the pointer to a buffer we fill in with data to upload and
size*nitems is the size of the buffer and therefore also the maximum amount
of data we can return to libcurl in this call. The 'userp' pointer is the
custom pointer we set to point to a struct of ours to pass private data
between the application and the callback.

 curl_easy_setopt(easyhandle, CURLOPT_READFUNCTION, read_function);

 curl_easy_setopt(easyhandle, CURLOPT_READDATA, &filedata);

Tell libcurl that we want to upload:

 curl_easy_setopt(easyhandle, CURLOPT_UPLOAD, 1L);

A few protocols won't behave properly when uploads are done without any prior
knowledge of the expected file size. So, set the upload file size using the
\fICURLOPT_INFILESIZE_LARGE(3)\fP for all known file sizes like this[1]:

.nf
 /* in this example, file_size must be an curl_off_t variable */
 curl_easy_setopt(easyhandle, CURLOPT_INFILESIZE_LARGE, file_size);
.fi

When you call \fIcurl_easy_perform(3)\fP this time, it'll perform all the
necessary operations and when it has invoked the upload it'll call your
supplied callback to get the data to upload. The program should return as much
data as possible in every invoke, as that is likely to make the upload perform
as fast as possible. The callback should return the number of bytes it wrote
in the buffer. Returning 0 will signal the end of the upload.

.SH "Passwords"
Many protocols use or even require that user name and password are provided
to be able to download or upload the data of your choice. libcurl offers
several ways to specify them.

Most protocols support that you specify the name and password in the URL
itself. libcurl will detect this and use them accordingly. This is written
like this:

 protocol://user:password@example.com/path/

If you need any odd letters in your user name or password, you should enter
them URL encoded, as %XX where XX is a two-digit hexadecimal number.

libcurl also provides options to set various passwords. The user name and
password as shown embedded in the URL can instead get set with the
\fICURLOPT_USERPWD(3)\fP option. The argument passed to libcurl should be a
char * to a string in the format "user:password". In a manner like this:

 curl_easy_setopt(easyhandle, CURLOPT_USERPWD, "myname:thesecret");

Another case where name and password might be needed at times, is for those
users who need to authenticate themselves to a proxy they use. libcurl offers
another option for this, the \fICURLOPT_PROXYUSERPWD(3)\fP. It is used quite
similar to the \fICURLOPT_USERPWD(3)\fP option like this:

 curl_easy_setopt(easyhandle, CURLOPT_PROXYUSERPWD, "myname:thesecret");

There's a long time UNIX "standard" way of storing ftp user names and
passwords, namely in the $HOME/.netrc file. The file should be made private
so that only the user may read it (see also the "Security Considerations"
chapter), as it might contain the password in plain text. libcurl has the
ability to use this file to figure out what set of user name and password to
use for a particular host. As an extension to the normal functionality,
libcurl also supports this file for non-FTP protocols such as HTTP. To make
curl use this file, use the \fICURLOPT_NETRC(3)\fP option:

 curl_easy_setopt(easyhandle, CURLOPT_NETRC, 1L);

And a very basic example of how such a .netrc file may look like:

.nf
 machine myhost.mydomain.com
 login userlogin
 password secretword
.fi

All these examples have been cases where the password has been optional, or
at least you could leave it out and have libcurl attempt to do its job
without it. There are times when the password isn't optional, like when
you're using an SSL private key for secure transfers.

To pass the known private key password to libcurl:

 curl_easy_setopt(easyhandle, CURLOPT_KEYPASSWD, "keypassword");

.SH "HTTP Authentication"
The previous chapter showed how to set user name and password for getting
URLs that require authentication. When using the HTTP protocol, there are
many different ways a client can provide those credentials to the server and
you can control which way libcurl will (attempt to) use them. The default HTTP
authentication method is called 'Basic', which is sending the name and
password in clear-text in the HTTP request, base64-encoded. This is insecure.

At the time of this writing, libcurl can be built to use: Basic, Digest, NTLM,
Negotiate, GSS-Negotiate and SPNEGO. You can tell libcurl which one to use
with \fICURLOPT_HTTPAUTH(3)\fP as in:

 curl_easy_setopt(easyhandle, CURLOPT_HTTPAUTH, CURLAUTH_DIGEST);

And when you send authentication to a proxy, you can also set authentication
type the same way but instead with \fICURLOPT_PROXYAUTH(3)\fP:

 curl_easy_setopt(easyhandle, CURLOPT_PROXYAUTH, CURLAUTH_NTLM);

Both these options allow you to set multiple types (by ORing them together),
to make libcurl pick the most secure one out of the types the server/proxy
claims to support. This method does however add a round-trip since libcurl
must first ask the server what it supports:

 curl_easy_setopt(easyhandle, CURLOPT_HTTPAUTH,
 CURLAUTH_DIGEST|CURLAUTH_BASIC);

For convenience, you can use the 'CURLAUTH_ANY' define (instead of a list
with specific types) which allows libcurl to use whatever method it wants.

When asking for multiple types, libcurl will pick the available one it
considers "best" in its own internal order of preference.

.SH "HTTP POSTing"
We get many questions regarding how to issue HTTP POSTs with libcurl the
proper way. This chapter will thus include examples using both different
versions of HTTP POST that libcurl supports.

The first version is the simple POST, the most common version, that most HTML
pages using the <form> tag uses. We provide a pointer to the data and tell
libcurl to post it all to the remote site:

.nf
    char *data="name=daniel&project=curl";
    curl_easy_setopt(easyhandle, CURLOPT_POSTFIELDS, data);
    curl_easy_setopt(easyhandle, CURLOPT_URL, "http://posthere.com/");

    curl_easy_perform(easyhandle); /* post away! */
.fi

Simple enough, huh? Since you set the POST options with the
\fICURLOPT_POSTFIELDS(3)\fP, this automatically switches the handle to use
POST in the upcoming request.

Ok, so what if you want to post binary data that also requires you to set the
Content-Type: header of the post? Well, binary posts prevent libcurl from
being able to do strlen() on the data to figure out the size, so therefore we
must tell libcurl the size of the post data. Setting headers in libcurl
requests are done in a generic way, by building a list of our own headers and
then passing that list to libcurl.

.nf
 struct curl_slist *headers=NULL;
 headers = curl_slist_append(headers, "Content-Type: text/xml");

 /* post binary data */
 curl_easy_setopt(easyhandle, CURLOPT_POSTFIELDS, binaryptr);

 /* set the size of the postfields data */
 curl_easy_setopt(easyhandle, CURLOPT_POSTFIELDSIZE, 23L);

 /* pass our list of custom made headers */
 curl_easy_setopt(easyhandle, CURLOPT_HTTPHEADER, headers);

 curl_easy_perform(easyhandle); /* post away! */

 curl_slist_free_all(headers); /* free the header list */
.fi

While the simple examples above cover the majority of all cases where HTTP
POST operations are required, they don't do multi-part formposts. Multi-part
formposts were introduced as a better way to post (possibly large) binary data
and were first documented in the RFC1867 (updated in RFC2388). They're called
multi-part because they're built by a chain of parts, each part being a single
unit of data. Each part has its own name and contents. You can in fact create
and post a multi-part formpost with the regular libcurl POST support described
above, but that would require that you build a formpost yourself and provide
to libcurl. To make that easier, libcurl provides \fIcurl_formadd(3)\fP. Using
this function, you add parts to the form. When you're done adding parts, you
post the whole form.

The following example sets two simple text parts with plain textual contents,
and then a file with binary contents and uploads the whole thing.

.nf
 struct curl_httppost *post=NULL;
 struct curl_httppost *last=NULL;
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "name",
              CURLFORM_COPYCONTENTS, "daniel", CURLFORM_END);
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "project",
              CURLFORM_COPYCONTENTS, "curl", CURLFORM_END);
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "logotype-image",
              CURLFORM_FILECONTENT, "curl.png", CURLFORM_END);

 /* Set the form info */
 curl_easy_setopt(easyhandle, CURLOPT_HTTPPOST, post);

 curl_easy_perform(easyhandle); /* post away! */

 /* free the post data again */
 curl_formfree(post);
.fi

Multipart formposts are chains of parts using MIME-style separators and
headers. It means that each one of these separate parts get a few headers set
that describe the individual content-type, size etc. To enable your
application to handicraft this formpost even more, libcurl allows you to
supply your own set of custom headers to such an individual form part. You can
of course supply headers to as many parts as you like, but this little example
will show how you set headers to one specific part when you add that to the
post handle:

.nf
 struct curl_slist *headers=NULL;
 headers = curl_slist_append(headers, "Content-Type: text/xml");

 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "logotype-image",
              CURLFORM_FILECONTENT, "curl.xml",
              CURLFORM_CONTENTHEADER, headers,
              CURLFORM_END);

 curl_easy_perform(easyhandle); /* post away! */

 curl_formfree(post); /* free post */
 curl_slist_free_all(headers); /* free custom header list */
.fi

Since all options on an easyhandle are "sticky", they remain the same until
changed even if you do call \fIcurl_easy_perform(3)\fP, you may need to tell
curl to go back to a plain GET request if you intend to do one as your next
request. You force an easyhandle to go back to GET by using the
\fICURLOPT_HTTPGET(3)\fP option:

 curl_easy_setopt(easyhandle, CURLOPT_HTTPGET, 1L);

Just setting \fICURLOPT_POSTFIELDS(3)\fP to "" or NULL will *not* stop libcurl
from doing a POST. It will just make it POST without any data to send!

.SH "Showing Progress"

For historical and traditional reasons, libcurl has a built-in progress meter
that can be switched on and then makes it present a progress meter in your
terminal.

Switch on the progress meter by, oddly enough, setting
\fICURLOPT_NOPROGRESS(3)\fP to zero. This option is set to 1 by default.

For most applications however, the built-in progress meter is useless and
what instead is interesting is the ability to specify a progress
callback. The function pointer you pass to libcurl will then be called on
irregular intervals with information about the current transfer.

Set the progress callback by using \fICURLOPT_PROGRESSFUNCTION(3)\fP. And pass
a pointer to a function that matches this prototype:

.nf
 int progress_callback(void *clientp,
                       double dltotal,
                       double dlnow,
                       double ultotal,
                       double ulnow);
.fi

If any of the input arguments is unknown, a 0 will be passed. The first
argument, the 'clientp' is the pointer you pass to libcurl with
\fICURLOPT_PROGRESSDATA(3)\fP. libcurl won't touch it.

.SH "libcurl with C++"

There's basically only one thing to keep in mind when using C++ instead of C
when interfacing libcurl:

The callbacks CANNOT be non-static class member functions

Example C++ code:

.nf
class AClass {
    static size_t write_data(void *ptr, size_t size, size_t nmemb,
                             void *ourpointer)
    {
      /* do what you want with the data */
    }
 }
.fi

.SH "Proxies"

What "proxy" means according to Merriam-Webster: "a person authorized to act
for another" but also "the agency, function, or office of a deputy who acts as
a substitute for another".

Proxies are exceedingly common these days. Companies often only offer Internet
access to employees through their proxies. Network clients or user-agents ask
the proxy for documents, the proxy does the actual request and then it returns
them.

libcurl supports SOCKS and HTTP proxies. When a given URL is wanted, libcurl
will ask the proxy for it instead of trying to connect to the actual host
identified in the URL.

If you're using a SOCKS proxy, you may find that libcurl doesn't quite support
all operations through it.

For HTTP proxies: the fact that the proxy is a HTTP proxy puts certain
restrictions on what can actually happen. A requested URL that might not be a
HTTP URL will be still be passed to the HTTP proxy to deliver back to
libcurl. This happens transparently, and an application may not need to
know. I say "may", because at times it is very important to understand that
all operations over a HTTP proxy use the HTTP protocol. For example, you
can't invoke your own custom FTP commands or even proper FTP directory
listings.

.IP "Proxy Options"

To tell libcurl to use a proxy at a given port number:

 curl_easy_setopt(easyhandle, CURLOPT_PROXY, "proxy-host.com:8080");

Some proxies require user authentication before allowing a request, and you
pass that information similar to this:

 curl_easy_setopt(easyhandle, CURLOPT_PROXYUSERPWD, "user:password");

If you want to, you can specify the host name only in the
\fICURLOPT_PROXY(3)\fP option, and set the port number separately with
\fICURLOPT_PROXYPORT(3)\fP.

Tell libcurl what kind of proxy it is with \fICURLOPT_PROXYTYPE(3)\fP (if not,
it will default to assume a HTTP proxy):

 curl_easy_setopt(easyhandle, CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4);

.IP "Environment Variables"

libcurl automatically checks and uses a set of environment variables to know
what proxies to use for certain protocols. The names of the variables are
following an ancient de facto standard and are built up as "[protocol]_proxy"
(note the lower casing). Which makes the variable \&'http_proxy' checked for a
name of a proxy to use when the input URL is HTTP. Following the same rule,
the variable named 'ftp_proxy' is checked for FTP URLs. Again, the proxies are
always HTTP proxies, the different names of the variables simply allows
different HTTP proxies to be used.

The proxy environment variable contents should be in the format
\&"[protocol://][user:password@]machine[:port]". Where the protocol:// part is
simply ignored if present (so http://proxy and bluerk://proxy will do the
same) and the optional port number specifies on which port the proxy operates
on the host. If not specified, the internal default port number will be used
and that is most likely *not* the one you would like it to be.

There are two special environment variables. 'all_proxy' is what sets proxy
for any URL in case the protocol specific variable wasn't set, and
\&'no_proxy' defines a list of hosts that should not use a proxy even though a
variable may say so. If 'no_proxy' is a plain asterisk ("*") it matches all
hosts.

To explicitly disable libcurl's checking for and using the proxy environment
variables, set the proxy name to "" - an empty string - with
\fICURLOPT_PROXY(3)\fP.
.IP "SSL and Proxies"

SSL is for secure point-to-point connections. This involves strong encryption
and similar things, which effectively makes it impossible for a proxy to
operate as a "man in between" which the proxy's task is, as previously
discussed. Instead, the only way to have SSL work over a HTTP proxy is to ask
the proxy to tunnel trough everything without being able to check or fiddle
with the traffic.

Opening an SSL connection over a HTTP proxy is therefor a matter of asking the
proxy for a straight connection to the target host on a specified port. This
is made with the HTTP request CONNECT. ("please mr proxy, connect me to that
remote host").

Because of the nature of this operation, where the proxy has no idea what kind
of data that is passed in and out through this tunnel, this breaks some of the
very few advantages that come from using a proxy, such as caching.  Many
organizations prevent this kind of tunneling to other destination port numbers
than 443 (which is the default HTTPS port number).

.IP "Tunneling Through Proxy"
As explained above, tunneling is required for SSL to work and often even
restricted to the operation intended for SSL; HTTPS.

This is however not the only time proxy-tunneling might offer benefits to
you or your application.

As tunneling opens a direct connection from your application to the remote
machine, it suddenly also re-introduces the ability to do non-HTTP
operations over a HTTP proxy. You can in fact use things such as FTP
upload or FTP custom commands this way.

Again, this is often prevented by the administrators of proxies and is
rarely allowed.

Tell libcurl to use proxy tunneling like this:

 curl_easy_setopt(easyhandle, CURLOPT_HTTPPROXYTUNNEL, 1L);

In fact, there might even be times when you want to do plain HTTP
operations using a tunnel like this, as it then enables you to operate on
the remote server instead of asking the proxy to do so. libcurl will not
stand in the way for such innovative actions either!

.IP "Proxy Auto-Config"

Netscape first came up with this. It is basically a web page (usually using a
\&.pac extension) with a Javascript that when executed by the browser with the
requested URL as input, returns information to the browser on how to connect
to the URL. The returned information might be "DIRECT" (which means no proxy
should be used), "PROXY host:port" (to tell the browser where the proxy for
this particular URL is) or "SOCKS host:port" (to direct the browser to a SOCKS
proxy).

libcurl has no means to interpret or evaluate Javascript and thus it doesn't
support this. If you get yourself in a position where you face this nasty
invention, the following advice have been mentioned and used in the past:

- Depending on the Javascript complexity, write up a script that translates it
to another language and execute that.

- Read the Javascript code and rewrite the same logic in another language.

- Implement a Javascript interpreter; people have successfully used the
Mozilla Javascript engine in the past.

- Ask your admins to stop this, for a static proxy setup or similar.

.SH "Persistence Is The Way to Happiness"

Re-cycling the same easy handle several times when doing multiple requests is
the way to go.

After each single \fIcurl_easy_perform(3)\fP operation, libcurl will keep the
connection alive and open. A subsequent request using the same easy handle to
the same host might just be able to use the already open connection! This
reduces network impact a lot.

Even if the connection is dropped, all connections involving SSL to the same
host again, will benefit from libcurl's session ID cache that drastically
reduces re-connection time.

FTP connections that are kept alive save a lot of time, as the command-
response round-trips are skipped, and also you don't risk getting blocked
without permission to login again like on many FTP servers only allowing N
persons to be logged in at the same time.

libcurl caches DNS name resolving results, to make lookups of a previously
looked up name a lot faster.

Other interesting details that improve performance for subsequent requests
may also be added in the future.

Each easy handle will attempt to keep the last few connections alive for a
while in case they are to be used again. You can set the size of this "cache"
with the \fICURLOPT_MAXCONNECTS(3)\fP option. Default is 5. There is very
seldom any point in changing this value, and if you think of changing this it
is often just a matter of thinking again.

To force your upcoming request to not use an already existing connection (it
will even close one first if there happens to be one alive to the same host
you're about to operate on), you can do that by setting
\fICURLOPT_FRESH_CONNECT(3)\fP to 1. In a similar spirit, you can also forbid
the upcoming request to be "lying" around and possibly get re-used after the
request by setting \fICURLOPT_FORBID_REUSE(3)\fP to 1.

.SH "HTTP Headers Used by libcurl"
When you use libcurl to do HTTP requests, it'll pass along a series of headers
automatically. It might be good for you to know and understand these. You
can replace or remove them by using the \fICURLOPT_HTTPHEADER(3)\fP option.

.IP "Host"
This header is required by HTTP 1.1 and even many 1.0 servers and should be
the name of the server we want to talk to. This includes the port number if
anything but default.

.IP "Accept"
\&"*/*".

.IP "Expect"
When doing POST requests, libcurl sets this header to \&"100-continue" to ask
the server for an "OK" message before it proceeds with sending the data part
of the post. If the POSTed data amount is deemed "small", libcurl will not use
this header.

.SH "Customizing Operations"
There is an ongoing development today where more and more protocols are built
upon HTTP for transport. This has obvious benefits as HTTP is a tested and
reliable protocol that is widely deployed and has excellent proxy-support.

When you use one of these protocols, and even when doing other kinds of
programming you may need to change the traditional HTTP (or FTP or...)
manners. You may need to change words, headers or various data.

libcurl is your friend here too.

.IP CUSTOMREQUEST
If just changing the actual HTTP request keyword is what you want, like when
GET, HEAD or POST is not good enough for you, \fICURLOPT_CUSTOMREQUEST(3)\fP
is there for you. It is very simple to use:

 curl_easy_setopt(easyhandle, CURLOPT_CUSTOMREQUEST, "MYOWNREQUEST");

When using the custom request, you change the request keyword of the actual
request you are performing. Thus, by default you make a GET request but you can
also make a POST operation (as described before) and then replace the POST
keyword if you want to. You're the boss.

.IP "Modify Headers"
HTTP-like protocols pass a series of headers to the server when doing the
request, and you're free to pass any amount of extra headers that you
think fit. Adding headers is this easy:

.nf
 struct curl_slist *headers=NULL; /* init to NULL is important */

 headers = curl_slist_append(headers, "Hey-server-hey: how are you?");
 headers = curl_slist_append(headers, "X-silly-content: yes");

 /* pass our list of custom made headers */
 curl_easy_setopt(easyhandle, CURLOPT_HTTPHEADER, headers);

 curl_easy_perform(easyhandle); /* transfer http */

 curl_slist_free_all(headers); /* free the header list */
.fi

\&... and if you think some of the internally generated headers, such as
Accept: or Host: don't contain the data you want them to contain, you can
replace them by simply setting them too:

.nf
 headers = curl_slist_append(headers, "Accept: Agent-007");
 headers = curl_slist_append(headers, "Host: munged.host.line");
.fi

.IP "Delete Headers"
If you replace an existing header with one with no contents, you will prevent
the header from being sent. For instance, if you want to completely prevent the
\&"Accept:" header from being sent, you can disable it with code similar to this:

 headers = curl_slist_append(headers, "Accept:");

Both replacing and canceling internal headers should be done with careful
consideration and you should be aware that you may violate the HTTP protocol
when doing so.

.IP "Enforcing chunked transfer-encoding"

By making sure a request uses the custom header "Transfer-Encoding: chunked"
when doing a non-GET HTTP operation, libcurl will switch over to "chunked"
upload, even though the size of the data to upload might be known. By default,
libcurl usually switches over to chunked upload automatically if the upload
data size is unknown.

.IP "HTTP Version"

All HTTP requests includes the version number to tell the server which version
we support. libcurl speaks HTTP 1.1 by default. Some very old servers don't
like getting 1.1-requests and when dealing with stubborn old things like that,
you can tell libcurl to use 1.0 instead by doing something like this:

 curl_easy_setopt(easyhandle, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_1_0);

.IP "FTP Custom Commands"

Not all protocols are HTTP-like, and thus the above may not help you when
you want to make, for example, your FTP transfers to behave differently.

Sending custom commands to a FTP server means that you need to send the
commands exactly as the FTP server expects them (RFC959 is a good guide
here), and you can only use commands that work on the control-connection
alone. All kinds of commands that require data interchange and thus need
a data-connection must be left to libcurl's own judgement. Also be aware
that libcurl will do its very best to change directory to the target
directory before doing any transfer, so if you change directory (with CWD
or similar) you might confuse libcurl and then it might not attempt to
transfer the file in the correct remote directory.

A little example that deletes a given file before an operation:

.nf
 headers = curl_slist_append(headers, "DELE file-to-remove");

 /* pass the list of custom commands to the handle */
 curl_easy_setopt(easyhandle, CURLOPT_QUOTE, headers);

 curl_easy_perform(easyhandle); /* transfer ftp data! */

 curl_slist_free_all(headers); /* free the header list */
.fi

If you would instead want this operation (or chain of operations) to happen
_after_ the data transfer took place the option to \fIcurl_easy_setopt(3)\fP
would instead be called \fICURLOPT_POSTQUOTE(3)\fP and used the exact same
way.

The custom FTP command will be issued to the server in the same order they are
added to the list, and if a command gets an error code returned back from the
server, no more commands will be issued and libcurl will bail out with an
error code (CURLE_QUOTE_ERROR). Note that if you use \fICURLOPT_QUOTE(3)\fP to
send commands before a transfer, no transfer will actually take place when a
quote command has failed.

If you set the \fICURLOPT_HEADER(3)\fP to 1, you will tell libcurl to get
information about the target file and output "headers" about it. The headers
will be in "HTTP-style", looking like they do in HTTP.

The option to enable headers or to run custom FTP commands may be useful to
combine with \fICURLOPT_NOBODY(3)\fP. If this option is set, no actual file
content transfer will be performed.

.IP "FTP Custom CUSTOMREQUEST"
If you do want to list the contents of a FTP directory using your own defined
FTP command, \fICURLOPT_CUSTOMREQUEST(3)\fP will do just that. "NLST" is the
default one for listing directories but you're free to pass in your idea of a
good alternative.

.SH "Cookies Without Chocolate Chips"
In the HTTP sense, a cookie is a name with an associated value. A server sends
the name and value to the client, and expects it to get sent back on every
subsequent request to the server that matches the particular conditions
set. The conditions include that the domain name and path match and that the
cookie hasn't become too old.

In real-world cases, servers send new cookies to replace existing ones to
update them. Server use cookies to "track" users and to keep "sessions".

Cookies are sent from server to clients with the header Set-Cookie: and
they're sent from clients to servers with the Cookie: header.

To just send whatever cookie you want to a server, you can use
\fICURLOPT_COOKIE(3)\fP to set a cookie string like this:

 curl_easy_setopt(easyhandle, CURLOPT_COOKIE, "name1=var1; name2=var2;");

In many cases, that is not enough. You might want to dynamically save
whatever cookies the remote server passes to you, and make sure those cookies
are then used accordingly on later requests.

One way to do this, is to save all headers you receive in a plain file and
when you make a request, you tell libcurl to read the previous headers to
figure out which cookies to use. Set the header file to read cookies from with
\fICURLOPT_COOKIEFILE(3)\fP.

The \fICURLOPT_COOKIEFILE(3)\fP option also automatically enables the cookie
parser in libcurl. Until the cookie parser is enabled, libcurl will not parse
or understand incoming cookies and they will just be ignored. However, when
the parser is enabled the cookies will be understood and the cookies will be
kept in memory and used properly in subsequent requests when the same handle
is used. Many times this is enough, and you may not have to save the cookies
to disk at all. Note that the file you specify to \ICURLOPT_COOKIEFILE(3)\fP
doesn't have to exist to enable the parser, so a common way to just enable the
parser and not read any cookies is to use the name of a file you know doesn't
exist.

If you would rather use existing cookies that you've previously received with
your Netscape or Mozilla browsers, you can make libcurl use that cookie file
as input. The \fICURLOPT_COOKIEFILE(3)\fP is used for that too, as libcurl
will automatically find out what kind of file it is and act accordingly.

Perhaps the most advanced cookie operation libcurl offers, is saving the
entire internal cookie state back into a Netscape/Mozilla formatted cookie
file. We call that the cookie-jar. When you set a file name with
\fICURLOPT_COOKIEJAR(3)\fP, that file name will be created and all received
cookies will be stored in it when \fIcurl_easy_cleanup(3)\fP is called. This
enables cookies to get passed on properly between multiple handles without any
information getting lost.

.SH "FTP Peculiarities We Need"

FTP transfers use a second TCP/IP connection for the data transfer. This is
usually a fact you can forget and ignore but at times this fact will come
back to haunt you. libcurl offers several different ways to customize how the
second connection is being made.

libcurl can either connect to the server a second time or tell the server to
connect back to it. The first option is the default and it is also what works
best for all the people behind firewalls, NATs or IP-masquerading setups.
libcurl then tells the server to open up a new port and wait for a second
connection. This is by default attempted with EPSV first, and if that doesn't
work it tries PASV instead. (EPSV is an extension to the original FTP spec
and does not exist nor work on all FTP servers.)

You can prevent libcurl from first trying the EPSV command by setting
\fICURLOPT_FTP_USE_EPSV(3)\fP to zero.

In some cases, you will prefer to have the server connect back to you for the
second connection. This might be when the server is perhaps behind a firewall
or something and only allows connections on a single port. libcurl then
informs the remote server which IP address and port number to connect to.
This is made with the \fICURLOPT_FTPPORT(3)\fP option. If you set it to "-",
libcurl will use your system's "default IP address". If you want to use a
particular IP, you can set the full IP address, a host name to resolve to an
IP address or even a local network interface name that libcurl will get the IP
address from.

When doing the "PORT" approach, libcurl will attempt to use the EPRT and the
LPRT before trying PORT, as they work with more protocols. You can disable
this behavior by setting \fICURLOPT_FTP_USE_EPRT(3)\fP to zero.

.SH "Headers Equal Fun"

Some protocols provide "headers", meta-data separated from the normal
data. These headers are by default not included in the normal data stream, but
you can make them appear in the data stream by setting \fICURLOPT_HEADER(3)\fP
to 1.

What might be even more useful, is libcurl's ability to separate the headers
from the data and thus make the callbacks differ. You can for example set a
different pointer to pass to the ordinary write callback by setting
\fICURLOPT_HEADERDATA(3)\fP.

Or, you can set an entirely separate function to receive the headers, by using
\fICURLOPT_HEADERFUNCTION(3)\fP.

The headers are passed to the callback function one by one, and you can
depend on that fact. It makes it easier for you to add custom header parsers
etc.

\&"Headers" for FTP transfers equal all the FTP server responses. They aren't
actually true headers, but in this case we pretend they are! ;-)

.SH "Post Transfer Information"

 [ curl_easy_getinfo ]

.SH "Security Considerations"

The libcurl project takes security seriously.  The library is written with
caution and precautions are taken to mitigate many kinds of risks encountered
while operating with potentially malicious servers on the Internet.  It is a
powerful library, however, which allows application writers to make trade offs
between ease of writing and exposure to potential risky operations.  If
used the right way, you can use libcurl to transfer data pretty safely.

Many applications are used in closed networks where users and servers
can be trusted, but many others are used on arbitrary servers and are fed
input from potentially untrusted users.  Following is a discussion about
some risks in the ways in which applications commonly use libcurl and
potential mitigations of those risks. It is by no means comprehensive, but
shows classes of attacks that robust applications should consider. The
Common Weakness Enumeration project at http://cwe.mitre.org/ is a good
reference for many of these and similar types of weaknesses of which
application writers should be aware.

.IP "Command Lines"
If you use a command line tool (such as curl) that uses libcurl, and you give
options to the tool on the command line those options can very likely get read
by other users of your system when they use 'ps' or other tools to list
currently running processes.

To avoid this problem, never feed sensitive things to programs using command
line options. Write them to a protected file and use the \-K option to
avoid this.

.IP ".netrc"
\&.netrc is a pretty handy file/feature that allows you to login quickly and
automatically to frequently visited sites. The file contains passwords in
clear text and is a real security risk. In some cases, your .netrc is also
stored in a home directory that is NFS mounted or used on another network
based file system, so the clear text password will fly through your network
every time anyone reads that file!

To avoid this problem, don't use .netrc files and never store passwords in
plain text anywhere.

.IP "Clear Text Passwords"
Many of the protocols libcurl supports send name and password unencrypted as
clear text (HTTP Basic authentication, FTP, TELNET etc). It is very easy for
anyone on your network or a network nearby yours to just fire up a network
analyzer tool and eavesdrop on your passwords. Don't let the fact that HTTP
Basic uses base64 encoded passwords fool you. They may not look readable at a
first glance, but they very easily "deciphered" by anyone within seconds.

To avoid this problem, use HTTP authentication methods or other protocols that
don't let snoopers see your password: HTTP with Digest, NTLM or GSS
authentication, HTTPS, FTPS, SCP, SFTP and FTP-Kerberos are a few examples.

.IP "Redirects"
The \fICURLOPT_FOLLOWLOCATION(3)\fP option automatically follows HTTP
redirects sent by a remote server.  These redirects can refer to any kind of
URL, not just HTTP.  A redirect to a file: URL would cause the libcurl to read
(or write) arbitrary files from the local filesystem.  If the application
returns the data back to the user (as would happen in some kinds of CGI
scripts), an attacker could leverage this to read otherwise forbidden data
(e.g.  file://localhost/etc/passwd).

If authentication credentials are stored in the ~/.netrc file, or Kerberos
is in use, any other URL type (not just file:) that requires
authentication is also at risk.  A redirect such as
ftp://some-internal-server/private-file would then return data even when
the server is password protected.

In the same way, if an unencrypted SSH private key has been configured for
the user running the libcurl application, SCP: or SFTP: URLs could access
password or private-key protected resources,
e.g. sftp://user@some-internal-server/etc/passwd

The \fICURLOPT_REDIR_PROTOCOLS(3)\fP and \fICURLOPT_NETRC(3)\fP options can be
used to mitigate against this kind of attack.

A redirect can also specify a location available only on the machine running
libcurl, including servers hidden behind a firewall from the attacker.
e.g. http://127.0.0.1/ or http://intranet/delete-stuff.cgi?delete=all or
tftp://bootp-server/pc-config-data

Apps can mitigate against this by disabling \fICURLOPT_FOLLOWLOCATION(3)\fP
and handling redirects itself, sanitizing URLs as necessary. Alternately, an
app could leave \fICURLOPT_FOLLOWLOCATION(3)\fP enabled but set
\fICURLOPT_REDIR_PROTOCOLS(3)\fP and install a
\fICURLOPT_OPENSOCKETFUNCTION(3)\fP callback function in which addresses are
sanitized before use.

.IP "Private Resources"
A user who can control the DNS server of a domain being passed in within a URL
can change the address of the host to a local, private address which a
server-side libcurl-using application could then use. e.g. the innocuous URL
http://fuzzybunnies.example.com/ could actually resolve to the IP address of a
server behind a firewall, such as 127.0.0.1 or 10.1.2.3.  Apps can mitigate
against this by setting a \fICURLOPT_OPENSOCKETFUNCTION(3)\fP and checking the
address before a connection.

All the malicious scenarios regarding redirected URLs apply just as well to
non-redirected URLs, if the user is allowed to specify an arbitrary URL that
could point to a private resource. For example, a web app providing a
translation service might happily translate file://localhost/etc/passwd and
display the result.  Apps can mitigate against this with the
\fICURLOPT_PROTOCOLS(3)\fP option as well as by similar mitigation techniques
for redirections.

A malicious FTP server could in response to the PASV command return an IP
address and port number for a server local to the app running libcurl but
behind a firewall.  Apps can mitigate against this by using the
\fICURLOPT_FTP_SKIP_PASV_IP(3)\fP option or \fICURLOPT_FTPPORT(3)\fP.

.IP "IPv6 Addresses"
libcurl will normally handle IPv6 addresses transparently and just as easily
as IPv4 addresses. That means that a sanitizing function that filters out
addressses like 127.0.0.1 isn't sufficient--the equivalent IPv6 addresses ::1,
::, 0:00::0:1, ::127.0.0.1 and ::ffff:7f00:1 supplied somehow by an attacker
would all bypass a naive filter and could allow access to undesired local
resources.  IPv6 also has special address blocks like link-local and site-local
that generally shouldn't be accessed by a server-side libcurl-using
application.  A poorly-configured firewall installed in a data center,
organization or server may also be configured to limit IPv4 connections but
leave IPv6 connections wide open.  In some cases, the CURL_IPRESOLVE_V4 option
can be used to limit resolved addresses to IPv4 only and bypass these issues.

.IP Uploads
When uploading, a redirect can cause a local (or remote) file to be
overwritten.  Apps must not allow any unsanitized URL to be passed in for
uploads.  Also, \fICURLOPT_FOLLOWLOCATION(3)\fP should not be used on uploads.
Instead, the app should handle redirects itself, sanitizing each URL first.

.IP Authentication
Use of \fICURLOPT_UNRESTRICTED_AUTH(3)\fP could cause authentication
information to be sent to an unknown second server.  Apps can mitigate against
this by disabling \fICURLOPT_FOLLOWLOCATION(3)\fP and handling redirects
itself, sanitizing where necessary.

Use of the CURLAUTH_ANY option to \fICURLOPT_HTTPAUTH(3)\fP could result in
user name and password being sent in clear text to an HTTP server.  Instead,
use CURLAUTH_ANYSAFE which ensures that the password is encrypted over the
network, or else fail the request.

Use of the CURLUSESSL_TRY option to \fICURLOPT_USE_SSL(3)\fP could result in
user name and password being sent in clear text to an FTP server.  Instead,
use CURLUSESSL_CONTROL to ensure that an encrypted connection is used or else
fail the request.

.IP Cookies
If cookies are enabled and cached, then a user could craft a URL which
performs some malicious action to a site whose authentication is already
stored in a cookie. e.g. http://mail.example.com/delete-stuff.cgi?delete=all
Apps can mitigate against this by disabling cookies or clearing them
between requests.

.IP "Dangerous URLs"
SCP URLs can contain raw commands within the scp: URL, which is a side effect
of how the SCP protocol is designed. e.g.
scp://user:pass@host/a;date >/tmp/test;
Apps must not allow unsanitized SCP: URLs to be passed in for downloads.

.IP "Denial of Service"
A malicious server could cause libcurl to effectively hang by sending a
trickle of data through, or even no data at all but just keeping the TCP
connection open.  This could result in a denial-of-service attack. The
\fICURLOPT_TIMEOUT(3)\fP and/or \fICURLOPT_LOW_SPEED_LIMIT(3)\fP options can
be used to mitigate against this.

A malicious server could cause libcurl to effectively hang by starting to send
data, then severing the connection without cleanly closing the TCP connection.
The app could install a \fICURLOPT_SOCKOPTFUNCTION(3)\fP callback function and
set the TCP SO_KEEPALIVE option to mitigate against this.  Setting one of the
timeout options would also work against this attack.

A malicious server could cause libcurl to download an infinite amount of data,
potentially causing all of memory or disk to be filled. Setting the
\fICURLOPT_MAXFILESIZE_LARGE(3)\fP option is not sufficient to guard against
this.  Instead, the app should monitor the amount of data received within the
write or progress callback and abort once the limit is reached.

A malicious HTTP server could cause an infinite redirection loop, causing a
denial-of-service. This can be mitigated by using the
\fICURLOPT_MAXREDIRS(3)\fP option.

.IP "Arbitrary Headers"
User-supplied data must be sanitized when used in options like
\fICURLOPT_USERAGENT(3)\fP, \fICURLOPT_HTTPHEADER(3)\fP,
\fICURLOPT_POSTFIELDS(3)\fP and others that are used to generate structured
data. Characters like embedded carriage returns or ampersands could allow the
user to create additional headers or fields that could cause malicious
transactions.

.IP "Server-supplied Names"
A server can supply data which the application may, in some cases, use as
a file name. The curl command-line tool does this with --remote-header-name,
using the Content-disposition: header to generate a file name.  An application
could also use CURLINFO_EFFECTIVE_URL to generate a file name from a
server-supplied redirect URL. Special care must be taken to sanitize such
names to avoid the possibility of a malicious server supplying one like
"/etc/passwd", "\\autoexec.bat", "prn:" or even ".bashrc".

.IP "Server Certificates"
A secure application should never use the \fICURLOPT_SSL_VERIFYPEER(3)\fP
option to disable certificate validation. There are numerous attacks that are
enabled by apps that fail to properly validate server TLS/SSL certificates,
thus enabling a malicious server to spoof a legitimate one. HTTPS without
validated certificates is potentially as insecure as a plain HTTP connection.

.IP "Showing What You Do"
On a related issue, be aware that even in situations like when you have
problems with libcurl and ask someone for help, everything you reveal in order
to get best possible help might also impose certain security related
risks. Host names, user names, paths, operating system specifics, etc. (not to
mention passwords of course) may in fact be used by intruders to gain
additional information of a potential target.

Be sure to limit access to application logs if they could hold private or
security-related data.  Besides the obvious candidates like user names and
passwords, things like URLs, cookies or even file names could also hold
sensitive data.

To avoid this problem, you must of course use your common sense. Often, you
can just edit out the sensitive data or just search/replace your true
information with faked data.

.SH "Multiple Transfers Using the multi Interface"

The easy interface as described in detail in this document is a synchronous
interface that transfers one file at a time and doesn't return until it is
done.

The multi interface, on the other hand, allows your program to transfer
multiple files in both directions at the same time, without forcing you
to use multiple threads.  The name might make it seem that the multi
interface is for multi-threaded programs, but the truth is almost the
reverse.  The multi interface can allow a single-threaded application
to perform the same kinds of multiple, simultaneous transfers that
multi-threaded programs can perform.  It allows many of the benefits
of multi-threaded transfers without the complexity of managing and
synchronizing many threads.

To use this interface, you are better off if you first understand the basics
of how to use the easy interface. The multi interface is simply a way to make
multiple transfers at the same time by adding up multiple easy handles into
a "multi stack".

You create the easy handles you want and you set all the options just like you
have been told above, and then you create a multi handle with
\fIcurl_multi_init(3)\fP and add all those easy handles to that multi handle
with \fIcurl_multi_add_handle(3)\fP.

When you've added the handles you have for the moment (you can still add new
ones at any time), you start the transfers by calling
\fIcurl_multi_perform(3)\fP.

\fIcurl_multi_perform(3)\fP is asynchronous. It will only execute as little as
possible and then return back control to your program. It is designed to never
block.

The best usage of this interface is when you do a select() on all possible
file descriptors or sockets to know when to call libcurl again. This also
makes it easy for you to wait and respond to actions on your own application's
sockets/handles. You figure out what to select() for by using
\fIcurl_multi_fdset(3)\fP, that fills in a set of fd_set variables for you
with the particular file descriptors libcurl uses for the moment.

When you then call select(), it'll return when one of the file handles signal
action and you then call \fIcurl_multi_perform(3)\fP to allow libcurl to do
what it wants to do. Take note that libcurl does also feature some time-out
code so we advise you to never use very long timeouts on select() before you
call \fIcurl_multi_perform(3)\fP, which thus should be called unconditionally
every now and then even if none of its file descriptors have signaled
ready. Another precaution you should use: always call
\fIcurl_multi_fdset(3)\fP immediately before the select() call since the
current set of file descriptors may change when calling a curl function.

If you want to stop the transfer of one of the easy handles in the stack, you
can use \fIcurl_multi_remove_handle(3)\fP to remove individual easy
handles. Remember that easy handles should be \fIcurl_easy_cleanup(3)\fPed.

When a transfer within the multi stack has finished, the counter of running
transfers (as filled in by \fIcurl_multi_perform(3)\fP) will decrease. When
the number reaches zero, all transfers are done.

\fIcurl_multi_info_read(3)\fP can be used to get information about completed
transfers. It then returns the CURLcode for each easy transfer, to allow you
to figure out success on each individual transfer.

.SH "SSL, Certificates and Other Tricks"

 [ seeding, passwords, keys, certificates, ENGINE, ca certs ]

.SH "Sharing Data Between Easy Handles"
You can share some data between easy handles when the easy interface is used,
and some data is share automatically when you use the multi interface.

When you add easy handles to a multi handle, these easy handles will
automatically share a lot of the data that otherwise would be kept on a
per-easy handle basis when the easy interface is used.

The DNS cache is shared between handles within a multi handle, making
subsequent name resolving faster, and the connection pool that is kept to
better allow persistent connections and connection re-use is also shared. If
you're using the easy interface, you can still share these between specific
easy handles by using the share interface, see \fIlibcurl-share(3)\fP.

Some things are never shared automatically, not within multi handles, like for
example cookies so the only way to share that is with the share interface.
.SH "Footnotes"

.IP "[1]"
libcurl 7.10.3 and later have the ability to switch over to chunked
Transfer-Encoding in cases where HTTP uploads are done with data of an unknown
size.
.IP "[2]"
This happens on Windows machines when libcurl is built and used as a
DLL. However, you can still do this on Windows if you link with a static
library.
.IP "[3]"
The curl-config tool is generated at build-time (on UNIX-like systems) and
should be installed with the 'make install' or similar instruction that
installs the library, header files, man pages etc.
.IP "[4]"
This behavior was different in versions before 7.17.0, where strings had to
remain valid past the end of the \fIcurl_easy_setopt(3)\fP call.