Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 #***************************************************************************
  18 #                                  _   _ ____  _
  19 #  Project                     ___| | | |  _ \| |
  20 #                             / __| | | | |_) | |
  21 #                            | (__| |_| |  _ <| |___
  22 #                             \___|\___/|_| \_\_____|
  23 #
  24 # Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
  25 #
  26 # This software is licensed as described in the file COPYING, which
  27 # you should have received as part of this distribution. The terms
  28 # are also available at https://curl.haxx.se/docs/copyright.html.
  29 #
  30 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
  31 # copies of the Software, and permit persons to whom the Software is
  32 # furnished to do so, under the terms of the COPYING file.
  33 #
  34 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  35 # KIND, either express or implied.
  36 #
  37 ###########################################################################
  38
  39 #***************************************************************************
  40 #                                  _   _ ____  _
  41 #  Project                     ___| | | |  _ \| |
  42 #                             / __| | | | |_) | |
  43 #                            | (__| |_| |  _ <| |___
  44 #                             \___|\___/|_| \_\_____|
  45 #
  46 # Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
  47 #
  48 # This software is licensed as described in the file COPYING, which
  49 # you should have received as part of this distribution. The terms
  50 # are also available at https://curl.haxx.se/docs/copyright.html.
  51 #
  52 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
  53 # copies of the Software, and permit persons to whom the Software is
  54 # furnished to do so, under the terms of the COPYING file.
  55 #
  56 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  57 # KIND, either express or implied.
  58 #
  59 ###########################################################################
  60
  61 # ./src/Makefile.inc
  62 # Using the backslash as line continuation character might be problematic
  63 # with some make flavours, as Watcom's wmake showed us already. If we
  64 # ever want to change this in a portable manner then we should consider
  65 # this idea (posted to the libcurl list by Adam Kellas):
  66 # CSRC1 = file1.c file2.c file3.c
  67 # CSRC2 = file4.c file5.c file6.c
  68 # CSOURCES = $(CSRC1) $(CSRC2)
  69
  70
  71 VPATH = @srcdir@
  72 am__is_gnu_make = { \
  73   if test -z '$(MAKELEVEL)'; then \
  74     false; \
  75   elif test -n '$(MAKE_HOST)'; then \
  76     true; \
  77   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  78     true; \
  79   else \
  80     false; \
  81   fi; \
  82 }
  83 am__make_running_with_option = \
  84   case $${target_option-} in \
  85       ?) ;; \
  86       *) echo "am__make_running_with_option: internal error: invalid" \
  87               "target option '$${target_option-}' specified" >&2; \
  88          exit 1;; \
  89   esac; \
  90   has_opt=no; \
  91   sane_makeflags=$$MAKEFLAGS; \
  92   if $(am__is_gnu_make); then \
  93     sane_makeflags=$$MFLAGS; \
  94   else \
  95     case $$MAKEFLAGS in \
  96       *\\[\ \   ]*) \
  97         bs=\\; \
  98         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  99           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
 100     esac; \
 101   fi; \
 102   skip_next=no; \
 103   strip_trailopt () \
 104   { \
 105     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
 106   }; \
 107   for flg in $$sane_makeflags; do \
 108     test $$skip_next = yes && { skip_next=no; continue; }; \
 109     case $$flg in \
 110       *=*|--*) continue;; \
 111         -*I) strip_trailopt 'I'; skip_next=yes;; \
 112       -*I?*) strip_trailopt 'I';; \
 113         -*O) strip_trailopt 'O'; skip_next=yes;; \
 114       -*O?*) strip_trailopt 'O';; \
 115         -*l) strip_trailopt 'l'; skip_next=yes;; \
 116       -*l?*) strip_trailopt 'l';; \
 117       -[dEDm]) skip_next=yes;; \
 118       -[JT]) skip_next=yes;; \
 119     esac; \
 120     case $$flg in \
 121       *$$target_option*) has_opt=yes; break;; \
 122     esac; \
 123   done; \
 124   test $$has_opt = yes
 125 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
 126 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 127 pkgdatadir = $(datadir)/@PACKAGE@
 128 pkgincludedir = $(includedir)/@PACKAGE@
 129 pkglibdir = $(libdir)/@PACKAGE@
 130 pkglibexecdir = $(libexecdir)/@PACKAGE@
 131 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 132 install_sh_DATA = $(install_sh) -c -m 644
 133 install_sh_PROGRAM = $(install_sh) -c
 134 install_sh_SCRIPT = $(install_sh) -c
 135 INSTALL_HEADER = $(INSTALL_DATA)
 136 transform = $(program_transform_name)
 137 NORMAL_INSTALL = :
 138 PRE_INSTALL = :
 139 POST_INSTALL = :
 140 NORMAL_UNINSTALL = :
 141 PRE_UNINSTALL = :
 142 POST_UNINSTALL = :
 143 build_triplet = @build@
 144 host_triplet = @host@
 145 subdir = .
 146 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 147 am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \
 148         $(top_srcdir)/m4/curl-confopts.m4 \
 149         $(top_srcdir)/m4/curl-functions.m4 \
 150         $(top_srcdir)/m4/curl-openssl.m4 \
 151         $(top_srcdir)/m4/curl-override.m4 \
 152         $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
 153         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 154         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 155         $(top_srcdir)/m4/xc-am-iface.m4 \
 156         $(top_srcdir)/m4/xc-cc-check.m4 \
 157         $(top_srcdir)/m4/xc-lt-iface.m4 \
 158         $(top_srcdir)/m4/xc-translit.m4 \
 159         $(top_srcdir)/m4/xc-val-flgs.m4 \
 160         $(top_srcdir)/m4/zz40-xc-ovr.m4 \
 161         $(top_srcdir)/m4/zz50-xc-ovr.m4 \
 162         $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
 163         $(top_srcdir)/configure.ac
 164 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 165         $(ACLOCAL_M4)
 166 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 167         $(am__configure_deps) $(am__DIST_COMMON)
 168 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 169  configure.lineno config.status.lineno
 170 mkinstalldirs = $(install_sh) -d
 171 CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
 172         $(top_builddir)/include/curl/curlbuild.h
 173 CONFIG_CLEAN_FILES = curl-config libcurl.pc
 174 CONFIG_CLEAN_VPATH_FILES =
 175 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 176 am__vpath_adj = case $$p in \
 177     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 178     *) f=$$p;; \
 179   esac;
 180 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 181 am__install_max = 40
 182 am__nobase_strip_setup = \
 183   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 184 am__nobase_strip = \
 185   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 186 am__nobase_list = $(am__nobase_strip_setup); \
 187   for p in $$list; do echo "$$p $$p"; done | \
 188   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 189   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 190     if (++n[$$2] == $(am__install_max)) \
 191       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 192     END { for (dir in files) print dir, files[dir] }'
 193 am__base_list = \
 194   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 195   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 196 am__uninstall_files_from_dir = { \
 197   test -z "$$files" \
 198     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 199     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 200          $(am__cd) "$$dir" && rm -f $$files; }; \
 201   }
 202 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
 203 SCRIPTS = $(bin_SCRIPTS)
 204 AM_V_P = $(am__v_P_@AM_V@)
 205 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 206 am__v_P_0 = false
 207 am__v_P_1 = :
 208 AM_V_GEN = $(am__v_GEN_@AM_V@)
 209 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 210 am__v_GEN_0 = @echo "  GEN     " $@;
 211 am__v_GEN_1 =
 212 AM_V_at = $(am__v_at_@AM_V@)
 213 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 214 am__v_at_0 = @
 215 am__v_at_1 =
 216 SOURCES =
 217 DIST_SOURCES =
 218 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 219         ctags-recursive dvi-recursive html-recursive info-recursive \
 220         install-data-recursive install-dvi-recursive \
 221         install-exec-recursive install-html-recursive \
 222         install-info-recursive install-pdf-recursive \
 223         install-ps-recursive install-recursive installcheck-recursive \
 224         installdirs-recursive pdf-recursive ps-recursive \
 225         tags-recursive uninstall-recursive
 226 am__can_run_installinfo = \
 227   case $$AM_UPDATE_INFO_DIR in \
 228     n|no|NO) false;; \
 229     *) (install-info --version) >/dev/null 2>&1;; \
 230   esac
 231 DATA = $(pkgconfig_DATA)
 232 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 233   distclean-recursive maintainer-clean-recursive
 234 am__recursive_targets = \
 235   $(RECURSIVE_TARGETS) \
 236   $(RECURSIVE_CLEAN_TARGETS) \
 237   $(am__extra_recursive_targets)
 238 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 239         cscope distdir dist dist-all distcheck
 240 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 241 # Read a list of newline-separated strings from the standard input,
 242 # and print each of them once, without duplicates.  Input order is
 243 # *not* preserved.
 244 am__uniquify_input = $(AWK) '\
 245   BEGIN { nonempty = 0; } \
 246   { items[$$0] = 1; nonempty = 1; } \
 247   END { if (nonempty) { for (i in items) print i; }; } \
 248 '
 249 # Make sure the list of sources is unique.  This is necessary because,
 250 # e.g., the same source file might be shared among _SOURCES variables
 251 # for different programs/libraries.
 252 am__define_uniq_tagged_files = \
 253   list='$(am__tagged_files)'; \
 254   unique=`for i in $$list; do \
 255     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 256   done | $(am__uniquify_input)`
 257 ETAGS = etags
 258 CTAGS = ctags
 259 CSCOPE = cscope
 260 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \
 261         $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \
 262         $(srcdir)/src/Makefile.inc COPYING README compile config.guess \
 263         config.sub depcomp install-sh ltmain.sh missing
 264 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 265 distdir = $(PACKAGE)-$(VERSION)
 266 top_distdir = $(distdir)
 267 am__remove_distdir = \
 268   if test -d "$(distdir)"; then \
 269     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 270       && rm -rf "$(distdir)" \
 271       || { sleep 5 && rm -rf "$(distdir)"; }; \
 272   else :; fi
 273 am__post_remove_distdir = $(am__remove_distdir)
 274 am__relativize = \
 275   dir0=`pwd`; \
 276   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 277   sed_rest='s,^[^/]*/*,,'; \
 278   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 279   sed_butlast='s,/*[^/]*$$,,'; \
 280   while test -n "$$dir1"; do \
 281     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 282     if test "$$first" != "."; then \
 283       if test "$$first" = ".."; then \
 284         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 285         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 286       else \
 287         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 288         if test "$$first2" = "$$first"; then \
 289           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 290         else \
 291           dir2="../$$dir2"; \
 292         fi; \
 293         dir0="$$dir0"/"$$first"; \
 294       fi; \
 295     fi; \
 296     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 297   done; \
 298   reldir="$$dir2"
 299 DIST_ARCHIVES = $(distdir).tar.gz
 300 GZIP_ENV = --best
 301 DIST_TARGETS = dist-gzip
 302 distuninstallcheck_listfiles = find . -type f -print
 303 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 304   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 305 distcleancheck_listfiles = find . -type f -print
 306 ACLOCAL = @ACLOCAL@
 307 AMTAR = @AMTAR@
 308 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 309 AR = @AR@
 310 AS = @AS@
 311 AUTOCONF = @AUTOCONF@
 312 AUTOHEADER = @AUTOHEADER@
 313 AUTOMAKE = @AUTOMAKE@
 314 AWK = @AWK@
 315 BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
 316 CC = @CC@
 317 CCDEPMODE = @CCDEPMODE@
 318 CFLAGS = @CFLAGS@
 319 CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
 320 CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
 321 CPP = @CPP@
 322 CPPFLAGS = @CPPFLAGS@
 323 CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
 324 CURLVERSION = @CURLVERSION@
 325 CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
 326 CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
 327 CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
 328 CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
 329 CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
 330 CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
 331 CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
 332 CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
 333 CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
 334 CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
 335 CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
 336 CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
 337 CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
 338 CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
 339 CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
 340 CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
 341 CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
 342 CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
 343 CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
 344 CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
 345 CYGPATH_W = @CYGPATH_W@
 346 DEFS = @DEFS@
 347 DEPDIR = @DEPDIR@
 348 DLLTOOL = @DLLTOOL@
 349 DSYMUTIL = @DSYMUTIL@
 350 DUMPBIN = @DUMPBIN@
 351 ECHO_C = @ECHO_C@
 352 ECHO_N = @ECHO_N@
 353 ECHO_T = @ECHO_T@
 354 EGREP = @EGREP@
 355 ENABLE_SHARED = @ENABLE_SHARED@
 356 ENABLE_STATIC = @ENABLE_STATIC@
 357 EXEEXT = @EXEEXT@
 358 FGREP = @FGREP@
 359 GREP = @GREP@
 360 HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
 361 HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
 362 HAVE_LIBZ = @HAVE_LIBZ@
 363 HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
 364 IDN_ENABLED = @IDN_ENABLED@
 365 INSTALL = @INSTALL@
 366 INSTALL_DATA = @INSTALL_DATA@
 367 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 368 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 369 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 370 IPV6_ENABLED = @IPV6_ENABLED@
 371 LD = @LD@
 372 LDFLAGS = @LDFLAGS@
 373 LIBCURL_LIBS = @LIBCURL_LIBS@
 374 LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
 375 LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
 376 LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
 377 LIBOBJS = @LIBOBJS@
 378 LIBS = @LIBS@
 379 LIBTOOL = @LIBTOOL@
 380 LIPO = @LIPO@
 381 LN_S = @LN_S@
 382 LTLIBOBJS = @LTLIBOBJS@
 383 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 384 MAINT = @MAINT@
 385 MAKEINFO = @MAKEINFO@
 386 MANIFEST_TOOL = @MANIFEST_TOOL@
 387 MANOPT = @MANOPT@
 388 MKDIR_P = @MKDIR_P@
 389 NM = @NM@
 390 NMEDIT = @NMEDIT@
 391 NROFF = @NROFF@
 392 NSS_LIBS = @NSS_LIBS@
 393 OBJDUMP = @OBJDUMP@
 394 OBJEXT = @OBJEXT@
 395 OTOOL = @OTOOL@
 396 OTOOL64 = @OTOOL64@
 397 PACKAGE = @PACKAGE@
 398 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 399 PACKAGE_NAME = @PACKAGE_NAME@
 400 PACKAGE_STRING = @PACKAGE_STRING@
 401 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 402 PACKAGE_URL = @PACKAGE_URL@
 403 PACKAGE_VERSION = @PACKAGE_VERSION@
 404 PATH_SEPARATOR = @PATH_SEPARATOR@
 405 PERL = @PERL@
 406 PKGADD_NAME = @PKGADD_NAME@
 407 PKGADD_PKG = @PKGADD_PKG@
 408 PKGADD_VENDOR = @PKGADD_VENDOR@
 409 PKGCONFIG = @PKGCONFIG@
 410 RANDOM_FILE = @RANDOM_FILE@
 411 RANLIB = @RANLIB@
 412 REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
 413 SED = @SED@
 414 SET_MAKE = @SET_MAKE@
 415 SHELL = @SHELL@
 416 SSL_ENABLED = @SSL_ENABLED@
 417 SSL_LIBS = @SSL_LIBS@
 418 STRIP = @STRIP@
 419 SUPPORT_FEATURES = @SUPPORT_FEATURES@
 420 SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
 421 USE_ARES = @USE_ARES@
 422 USE_AXTLS = @USE_AXTLS@
 423 USE_CYASSL = @USE_CYASSL@
 424 USE_DARWINSSL = @USE_DARWINSSL@
 425 USE_GNUTLS = @USE_GNUTLS@
 426 USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
 427 USE_LIBRTMP = @USE_LIBRTMP@
 428 USE_LIBSSH2 = @USE_LIBSSH2@
 429 USE_MBEDTLS = @USE_MBEDTLS@
 430 USE_NGHTTP2 = @USE_NGHTTP2@
 431 USE_NSS = @USE_NSS@
 432 USE_OPENLDAP = @USE_OPENLDAP@
 433 USE_POLARSSL = @USE_POLARSSL@
 434 USE_SCHANNEL = @USE_SCHANNEL@
 435 USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
 436 USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
 437 VERSION = @VERSION@
 438 VERSIONNUM = @VERSIONNUM@
 439 ZLIB_LIBS = @ZLIB_LIBS@
 440 ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
 441 abs_builddir = @abs_builddir@
 442 abs_srcdir = @abs_srcdir@
 443 abs_top_builddir = @abs_top_builddir@
 444 abs_top_srcdir = @abs_top_srcdir@
 445 ac_ct_AR = @ac_ct_AR@
 446 ac_ct_CC = @ac_ct_CC@
 447 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 448 am__include = @am__include@
 449 am__leading_dot = @am__leading_dot@
 450 am__quote = @am__quote@
 451 am__tar = @am__tar@
 452 am__untar = @am__untar@
 453 bindir = @bindir@
 454 build = @build@
 455 build_alias = @build_alias@
 456 build_cpu = @build_cpu@
 457 build_os = @build_os@
 458 build_vendor = @build_vendor@
 459 builddir = @builddir@
 460 datadir = @datadir@
 461 datarootdir = @datarootdir@
 462 docdir = @docdir@
 463 dvidir = @dvidir@
 464 exec_prefix = @exec_prefix@
 465 host = @host@
 466 host_alias = @host_alias@
 467 host_cpu = @host_cpu@
 468 host_os = @host_os@
 469 host_vendor = @host_vendor@
 470 htmldir = @htmldir@
 471 includedir = @includedir@
 472 infodir = @infodir@
 473 install_sh = @install_sh@
 474 libdir = @libdir@
 475 libexecdir = @libexecdir@
 476 libext = @libext@
 477 localedir = @localedir@
 478 localstatedir = @localstatedir@
 479 mandir = @mandir@
 480 mkdir_p = @mkdir_p@
 481 oldincludedir = @oldincludedir@
 482 pdfdir = @pdfdir@
 483 prefix = @prefix@
 484 program_transform_name = @program_transform_name@
 485 psdir = @psdir@
 486 runstatedir = @runstatedir@
 487 sbindir = @sbindir@
 488 sharedstatedir = @sharedstatedir@
 489 srcdir = @srcdir@
 490 subdirs = @subdirs@
 491 sysconfdir = @sysconfdir@
 492 target_alias = @target_alias@
 493 top_build_prefix = @top_build_prefix@
 494 top_builddir = @top_builddir@
 495 top_srcdir = @top_srcdir@
 496 AUTOMAKE_OPTIONS = foreign
 497 ACLOCAL_AMFLAGS = -I m4
 498 CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in      \
 499  CMake/CurlTests.c CMake/FindGSS.cmake CMake/OtherTests.cmake   \
 500  CMake/Platforms/WindowsCache.cmake CMake/Utilities.cmake       \
 501  include/curl/curlbuild.h.cmake CMake/Macros.cmake
 502
 503 VC6_LIBTMPL = projects/Windows/VC6/lib/libcurl.tmpl
 504 VC6_LIBDSP = projects/Windows/VC6/lib/libcurl.dsp.dist
 505 VC6_LIBDSP_DEPS = $(VC6_LIBTMPL) Makefile.am lib/Makefile.inc
 506 VC6_SRCTMPL = projects/Windows/VC6/src/curl.tmpl
 507 VC6_SRCDSP = projects/Windows/VC6/src/curl.dsp.dist
 508 VC6_SRCDSP_DEPS = $(VC6_SRCTMPL) Makefile.am src/Makefile.inc
 509 VC7_LIBTMPL = projects/Windows/VC7/lib/libcurl.tmpl
 510 VC7_LIBVCPROJ = projects/Windows/VC7/lib/libcurl.vcproj.dist
 511 VC7_LIBVCPROJ_DEPS = $(VC7_LIBTMPL) Makefile.am lib/Makefile.inc
 512 VC7_SRCTMPL = projects/Windows/VC7/src/curl.tmpl
 513 VC7_SRCVCPROJ = projects/Windows/VC7/src/curl.vcproj.dist
 514 VC7_SRCVCPROJ_DEPS = $(VC7_SRCTMPL) Makefile.am src/Makefile.inc
 515 VC71_LIBTMPL = projects/Windows/VC7.1/lib/libcurl.tmpl
 516 VC71_LIBVCPROJ = projects/Windows/VC7.1/lib/libcurl.vcproj.dist
 517 VC71_LIBVCPROJ_DEPS = $(VC71_LIBTMPL) Makefile.am lib/Makefile.inc
 518 VC71_SRCTMPL = projects/Windows/VC7.1/src/curl.tmpl
 519 VC71_SRCVCPROJ = projects/Windows/VC7.1/src/curl.vcproj.dist
 520 VC71_SRCVCPROJ_DEPS = $(VC71_SRCTMPL) Makefile.am src/Makefile.inc
 521 VC8_LIBTMPL = projects/Windows/VC8/lib/libcurl.tmpl
 522 VC8_LIBVCPROJ = projects/Windows/VC8/lib/libcurl.vcproj.dist
 523 VC8_LIBVCPROJ_DEPS = $(VC8_LIBTMPL) Makefile.am lib/Makefile.inc
 524 VC8_SRCTMPL = projects/Windows/VC8/src/curl.tmpl
 525 VC8_SRCVCPROJ = projects/Windows/VC8/src/curl.vcproj.dist
 526 VC8_SRCVCPROJ_DEPS = $(VC8_SRCTMPL) Makefile.am src/Makefile.inc
 527 VC9_LIBTMPL = projects/Windows/VC9/lib/libcurl.tmpl
 528 VC9_LIBVCPROJ = projects/Windows/VC9/lib/libcurl.vcproj.dist
 529 VC9_LIBVCPROJ_DEPS = $(VC9_LIBTMPL) Makefile.am lib/Makefile.inc
 530 VC9_SRCTMPL = projects/Windows/VC9/src/curl.tmpl
 531 VC9_SRCVCPROJ = projects/Windows/VC9/src/curl.vcproj.dist
 532 VC9_SRCVCPROJ_DEPS = $(VC9_SRCTMPL) Makefile.am src/Makefile.inc
 533 VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl
 534 VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist
 535 VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc
 536 VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl
 537 VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist
 538 VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc
 539 VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl
 540 VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist
 541 VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc
 542 VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl
 543 VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist
 544 VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc
 545 VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl
 546 VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist
 547 VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc
 548 VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl
 549 VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist
 550 VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc
 551 VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl
 552 VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist
 553 VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc
 554 VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl
 555 VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist
 556 VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc
 557 VC_DIST = projects/README                           \
 558  projects/build-openssl.bat                         \
 559  projects/build-wolfssl.bat                         \
 560  projects/checksrc.bat                              \
 561  projects/Windows/VC6/curl-all.dsw                  \
 562  projects/Windows/VC6/lib/libcurl.dsw               \
 563  projects/Windows/VC6/src/curl.dsw                  \
 564  projects/Windows/VC7/curl-all.sln                  \
 565  projects/Windows/VC7/lib/libcurl.sln               \
 566  projects/Windows/VC7/src/curl.sln                  \
 567  projects/Windows/VC7.1/curl-all.sln                \
 568  projects/Windows/VC7.1/lib/libcurl.sln             \
 569  projects/Windows/VC7.1/src/curl.sln                \
 570  projects/Windows/VC8/curl-all.sln                  \
 571  projects/Windows/VC8/lib/libcurl.sln               \
 572  projects/Windows/VC8/src/curl.sln                  \
 573  projects/Windows/VC9/curl-all.sln                  \
 574  projects/Windows/VC9/lib/libcurl.sln               \
 575  projects/Windows/VC9/src/curl.sln                  \
 576  projects/Windows/VC10/curl-all.sln                 \
 577  projects/Windows/VC10/lib/libcurl.sln              \
 578  projects/Windows/VC10/lib/libcurl.vcxproj.filters  \
 579  projects/Windows/VC10/src/curl.sln                 \
 580  projects/Windows/VC10/src/curl.vcxproj.filters     \
 581  projects/Windows/VC11/curl-all.sln                 \
 582  projects/Windows/VC11/lib/libcurl.sln              \
 583  projects/Windows/VC11/lib/libcurl.vcxproj.filters  \
 584  projects/Windows/VC11/src/curl.sln                 \
 585  projects/Windows/VC11/src/curl.vcxproj.filters     \
 586  projects/Windows/VC12/curl-all.sln                 \
 587  projects/Windows/VC12/lib/libcurl.sln              \
 588  projects/Windows/VC12/lib/libcurl.vcxproj.filters  \
 589  projects/Windows/VC12/src/curl.sln                 \
 590  projects/Windows/VC12/src/curl.vcxproj.filters     \
 591  projects/Windows/VC14/curl-all.sln                 \
 592  projects/Windows/VC14/lib/libcurl.sln              \
 593  projects/Windows/VC14/lib/libcurl.vcxproj.filters  \
 594  projects/Windows/VC14/src/curl.sln                 \
 595  projects/Windows/VC14/src/curl.vcxproj.filters
 596
 597 WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat   \
 598  winbuild/MakefileBuild.vc winbuild/Makefile.vc                         \
 599  winbuild/Makefile.msvc.names
 600
 601 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in       \
 602  RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework scripts/zsh.pl  \
 603  $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST) lib/libcurl.vers.in          \
 604  buildconf.bat
 605
 606 CLEANFILES = $(VC6_LIBDSP) $(VC6_SRCDSP) $(VC7_LIBVCPROJ) $(VC7_SRCVCPROJ)      \
 607  $(VC71_LIBVCPROJ) $(VC71_SRCVCPROJ) $(VC8_LIBVCPROJ) $(VC8_SRCVCPROJ)  \
 608  $(VC9_LIBVCPROJ) $(VC9_SRCVCPROJ) $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ)        \
 609  $(VC11_LIBVCXPROJ) $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ)    \
 610  $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ)
 611
 612 bin_SCRIPTS = curl-config
 613 SUBDIRS = lib src include
 614 DIST_SUBDIRS = $(SUBDIRS) tests packages docs scripts
 615 pkgconfigdir = $(libdir)/pkgconfig
 616 pkgconfig_DATA = libcurl.pc
 617 LIB_VAUTH_CFILES = vauth/vauth.c vauth/cleartext.c vauth/cram.c         \
 618   vauth/digest.c vauth/digest_sspi.c vauth/krb5_gssapi.c                \
 619   vauth/krb5_sspi.c vauth/ntlm.c vauth/ntlm_sspi.c vauth/oauth2.c       \
 620   vauth/spnego_gssapi.c vauth/spnego_sspi.c
 621
 622 LIB_VAUTH_HFILES = vauth/vauth.h vauth/digest.h vauth/ntlm.h
 623 LIB_VTLS_CFILES = vtls/openssl.c vtls/gtls.c vtls/vtls.c vtls/nss.c     \
 624   vtls/polarssl.c vtls/polarssl_threadlock.c vtls/axtls.c               \
 625   vtls/cyassl.c vtls/schannel.c vtls/darwinssl.c vtls/gskit.c           \
 626   vtls/mbedtls.c
 627
 628 LIB_VTLS_HFILES = vtls/openssl.h vtls/vtls.h vtls/gtls.h                \
 629   vtls/nssg.h vtls/polarssl.h vtls/polarssl_threadlock.h vtls/axtls.h   \
 630   vtls/cyassl.h vtls/schannel.h vtls/darwinssl.h vtls/gskit.h           \
 631   vtls/mbedtls.h
 632
 633 LIB_CFILES = file.c timeval.c base64.c hostip.c progress.c formdata.c   \
 634   cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c       \
 635   ldap.c version.c getenv.c escape.c mprintf.c telnet.c netrc.c         \
 636   getinfo.c transfer.c strequal.c easy.c security.c curl_fnmatch.c      \
 637   fileinfo.c ftplistparser.c wildcard.c krb5.c memdebug.c http_chunks.c \
 638   strtok.c connect.c llist.c hash.c multi.c content_encoding.c share.c  \
 639   http_digest.c md4.c md5.c http_negotiate.c inet_pton.c strtoofft.c    \
 640   strerror.c amigaos.c hostasyn.c hostip4.c hostip6.c hostsyn.c         \
 641   inet_ntop.c parsedate.c select.c tftp.c splay.c strdup.c socks.c      \
 642   ssh.c rawstr.c curl_addrinfo.c socks_gssapi.c socks_sspi.c            \
 643   curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c    \
 644   pingpong.c rtsp.c curl_threads.c warnless.c hmac.c curl_rtmp.c        \
 645   openldap.c curl_gethostname.c gopher.c idn_win32.c                    \
 646   http_proxy.c non-ascii.c asyn-ares.c asyn-thread.c curl_gssapi.c      \
 647   http_ntlm.c curl_ntlm_wb.c curl_ntlm_core.c curl_sasl.c               \
 648   curl_multibyte.c hostcheck.c conncache.c pipeline.c dotdot.c          \
 649   x509asn1.c http2.c smb.c curl_endian.c curl_des.c system_win32.c
 650
 651 LIB_HFILES = arpa_telnet.h netrc.h file.h timeval.h hostip.h progress.h \
 652   formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h if2ip.h         \
 653   speedcheck.h urldata.h curl_ldap.h escape.h telnet.h getinfo.h        \
 654   strequal.h curl_sec.h memdebug.h http_chunks.h curl_fnmatch.h         \
 655   wildcard.h fileinfo.h ftplistparser.h strtok.h connect.h llist.h      \
 656   hash.h content_encoding.h share.h curl_md4.h curl_md5.h http_digest.h \
 657   http_negotiate.h inet_pton.h amigaos.h strtoofft.h strerror.h         \
 658   inet_ntop.h curlx.h curl_memory.h curl_setup.h transfer.h select.h    \
 659   easyif.h multiif.h parsedate.h tftp.h sockaddr.h splay.h strdup.h     \
 660   socks.h ssh.h curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h      \
 661   slist.h nonblock.h curl_memrchr.h imap.h pop3.h smtp.h pingpong.h     \
 662   rtsp.h curl_threads.h warnless.h curl_hmac.h curl_rtmp.h              \
 663   curl_gethostname.h gopher.h http_proxy.h non-ascii.h asyn.h           \
 664   http_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h             \
 665   curl_sasl.h curl_multibyte.h hostcheck.h conncache.h                  \
 666   curl_setup_once.h multihandle.h setup-vms.h pipeline.h dotdot.h       \
 667   x509asn1.h http2.h sigpipe.h smb.h curl_endian.h curl_des.h           \
 668   curl_printf.h system_win32.h
 669
 670 LIB_RCFILES = libcurl.rc
 671 CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES)
 672 HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES)
 673
 674 # libcurl has sources that provide functions named curlx_* that aren't part of
 675 # the official API, but we re-use the code here to avoid duplication.
 676 CURLX_CFILES = \
 677         ../lib/strtoofft.c \
 678         ../lib/rawstr.c \
 679         ../lib/nonblock.c \
 680         ../lib/warnless.c
 681
 682 CURLX_HFILES = \
 683         ../lib/curl_setup.h \
 684         ../lib/strtoofft.h \
 685         ../lib/rawstr.h \
 686         ../lib/nonblock.h \
 687         ../lib/warnless.h
 688
 689 CURL_CFILES = \
 690         slist_wc.c \
 691         tool_binmode.c \
 692         tool_bname.c \
 693         tool_cb_dbg.c \
 694         tool_cb_hdr.c \
 695         tool_cb_prg.c \
 696         tool_cb_rea.c \
 697         tool_cb_see.c \
 698         tool_cb_wrt.c \
 699         tool_cfgable.c \
 700         tool_convert.c \
 701         tool_dirhie.c \
 702         tool_doswin.c \
 703         tool_easysrc.c \
 704         tool_formparse.c \
 705         tool_getparam.c \
 706         tool_getpass.c \
 707         tool_help.c \
 708         tool_helpers.c \
 709         tool_homedir.c \
 710         tool_hugehelp.c \
 711         tool_libinfo.c \
 712         tool_main.c \
 713         tool_metalink.c \
 714         tool_mfiles.c \
 715         tool_msgs.c \
 716         tool_operate.c \
 717         tool_operhlp.c \
 718         tool_panykey.c \
 719         tool_paramhlp.c \
 720         tool_parsecfg.c \
 721         tool_strdup.c \
 722         tool_setopt.c \
 723         tool_sleep.c \
 724         tool_urlglob.c \
 725         tool_util.c \
 726         tool_vms.c \
 727         tool_writeenv.c \
 728         tool_writeout.c \
 729         tool_xattr.c
 730
 731 CURL_HFILES = \
 732         slist_wc.h \
 733         tool_binmode.h \
 734         tool_bname.h \
 735         tool_cb_dbg.h \
 736         tool_cb_hdr.h \
 737         tool_cb_prg.h \
 738         tool_cb_rea.h \
 739         tool_cb_see.h \
 740         tool_cb_wrt.h \
 741         tool_cfgable.h \
 742         tool_convert.h \
 743         tool_dirhie.h \
 744         tool_doswin.h \
 745         tool_easysrc.h \
 746         tool_formparse.h \
 747         tool_getparam.h \
 748         tool_getpass.h \
 749         tool_help.h \
 750         tool_helpers.h \
 751         tool_homedir.h \
 752         tool_hugehelp.h \
 753         tool_libinfo.h \
 754         tool_main.h \
 755         tool_metalink.h \
 756         tool_mfiles.h \
 757         tool_msgs.h \
 758         tool_operate.h \
 759         tool_operhlp.h \
 760         tool_panykey.h \
 761         tool_paramhlp.h \
 762         tool_parsecfg.h \
 763         tool_sdecls.h \
 764         tool_setopt.h \
 765         tool_setup.h \
 766         tool_sleep.h \
 767         tool_strdup.h \
 768         tool_urlglob.h \
 769         tool_util.h \
 770         tool_version.h \
 771         tool_vms.h \
 772         tool_writeenv.h \
 773         tool_writeout.h \
 774         tool_xattr.h
 775
 776 CURL_RCFILES = curl.rc
 777
 778 # curl_SOURCES is special and gets assigned in src/Makefile.am
 779 CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
 780 all: all-recursive
 781
 782 .SUFFIXES:
 783 am--refresh: Makefile
 784         @:
 785 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
 786         @for dep in $?; do \
 787           case '$(am__configure_deps)' in \
 788             *$$dep*) \
 789               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 790               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 791                 && exit 0; \
 792               exit 1;; \
 793           esac; \
 794         done; \
 795         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 796         $(am__cd) $(top_srcdir) && \
 797           $(AUTOMAKE) --foreign Makefile
 798 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 799         @case '$?' in \
 800           *config.status*) \
 801             echo ' $(SHELL) ./config.status'; \
 802             $(SHELL) ./config.status;; \
 803           *) \
 804             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 805             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 806         esac;
 807 $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty):
 808
 809 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 810         $(SHELL) ./config.status --recheck
 811
 812 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 813         $(am__cd) $(srcdir) && $(AUTOCONF)
 814 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 815         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 816 $(am__aclocal_m4_deps):
 817 curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
 818         cd $(top_builddir) && $(SHELL) ./config.status $@
 819 libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
 820         cd $(top_builddir) && $(SHELL) ./config.status $@
 821 install-binSCRIPTS: $(bin_SCRIPTS)
 822         @$(NORMAL_INSTALL)
 823         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
 824         if test -n "$$list"; then \
 825           echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
 826           $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
 827         fi; \
 828         for p in $$list; do \
 829           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 830           if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
 831         done | \
 832         sed -e 'p;s,.*/,,;n' \
 833             -e 'h;s|.*|.|' \
 834             -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
 835         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
 836           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 837             if ($$2 == $$4) { files[d] = files[d] " " $$1; \
 838               if (++n[d] == $(am__install_max)) { \
 839                 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
 840             else { print "f", d "/" $$4, $$1 } } \
 841           END { for (d in files) print "f", d, files[d] }' | \
 842         while read type dir files; do \
 843              if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 844              test -z "$$files" || { \
 845                echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 846                $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 847              } \
 848         ; done
 849
 850 uninstall-binSCRIPTS:
 851         @$(NORMAL_UNINSTALL)
 852         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
 853         files=`for p in $$list; do echo "$$p"; done | \
 854                sed -e 's,.*/,,;$(transform)'`; \
 855         dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
 856
 857 mostlyclean-libtool:
 858         -rm -f *.lo
 859
 860 clean-libtool:
 861         -rm -rf .libs _libs
 862
 863 distclean-libtool:
 864         -rm -f libtool config.lt
 865 install-pkgconfigDATA: $(pkgconfig_DATA)
 866         @$(NORMAL_INSTALL)
 867         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 868         if test -n "$$list"; then \
 869           echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
 870           $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
 871         fi; \
 872         for p in $$list; do \
 873           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 874           echo "$$d$$p"; \
 875         done | $(am__base_list) | \
 876         while read files; do \
 877           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
 878           $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 879         done
 880
 881 uninstall-pkgconfigDATA:
 882         @$(NORMAL_UNINSTALL)
 883         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 884         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 885         dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 886
 887 # This directory's subdirectories are mostly independent; you can cd
 888 # into them and run 'make' without going through this Makefile.
 889 # To change the values of 'make' variables: instead of editing Makefiles,
 890 # (1) if the variable is set in 'config.status', edit 'config.status'
 891 #     (which will cause the Makefiles to be regenerated when you run 'make');
 892 # (2) otherwise, pass the desired values on the 'make' command line.
 893 $(am__recursive_targets):
 894         @fail=; \
 895         if $(am__make_keepgoing); then \
 896           failcom='fail=yes'; \
 897         else \
 898           failcom='exit 1'; \
 899         fi; \
 900         dot_seen=no; \
 901         target=`echo $@ | sed s/-recursive//`; \
 902         case "$@" in \
 903           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 904           *) list='$(SUBDIRS)' ;; \
 905         esac; \
 906         for subdir in $$list; do \
 907           echo "Making $$target in $$subdir"; \
 908           if test "$$subdir" = "."; then \
 909             dot_seen=yes; \
 910             local_target="$$target-am"; \
 911           else \
 912             local_target="$$target"; \
 913           fi; \
 914           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 915           || eval $$failcom; \
 916         done; \
 917         if test "$$dot_seen" = "no"; then \
 918           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 919         fi; test -z "$$fail"
 920
 921 ID: $(am__tagged_files)
 922         $(am__define_uniq_tagged_files); mkid -fID $$unique
 923 tags: tags-recursive
 924 TAGS: tags
 925
 926 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 927         set x; \
 928         here=`pwd`; \
 929         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 930           include_option=--etags-include; \
 931           empty_fix=.; \
 932         else \
 933           include_option=--include; \
 934           empty_fix=; \
 935         fi; \
 936         list='$(SUBDIRS)'; for subdir in $$list; do \
 937           if test "$$subdir" = .; then :; else \
 938             test ! -f $$subdir/TAGS || \
 939               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 940           fi; \
 941         done; \
 942         $(am__define_uniq_tagged_files); \
 943         shift; \
 944         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 945           test -n "$$unique" || unique=$$empty_fix; \
 946           if test $$# -gt 0; then \
 947             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 948               "$$@" $$unique; \
 949           else \
 950             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 951               $$unique; \
 952           fi; \
 953         fi
 954 ctags: ctags-recursive
 955
 956 CTAGS: ctags
 957 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 958         $(am__define_uniq_tagged_files); \
 959         test -z "$(CTAGS_ARGS)$$unique" \
 960           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 961              $$unique
 962
 963 GTAGS:
 964         here=`$(am__cd) $(top_builddir) && pwd` \
 965           && $(am__cd) $(top_srcdir) \
 966           && gtags -i $(GTAGS_ARGS) "$$here"
 967 cscope: cscope.files
 968         test ! -s cscope.files \
 969           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 970 clean-cscope:
 971         -rm -f cscope.files
 972 cscope.files: clean-cscope cscopelist
 973 cscopelist: cscopelist-recursive
 974
 975 cscopelist-am: $(am__tagged_files)
 976         list='$(am__tagged_files)'; \
 977         case "$(srcdir)" in \
 978           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 979           *) sdir=$(subdir)/$(srcdir) ;; \
 980         esac; \
 981         for i in $$list; do \
 982           if test -f "$$i"; then \
 983             echo "$(subdir)/$$i"; \
 984           else \
 985             echo "$$sdir/$$i"; \
 986           fi; \
 987         done >> $(top_builddir)/cscope.files
 988
 989 distclean-tags:
 990         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 991         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 992
 993 distdir: $(DISTFILES)
 994         $(am__remove_distdir)
 995         test -d "$(distdir)" || mkdir "$(distdir)"
 996         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 997         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 998         list='$(DISTFILES)'; \
 999           dist_files=`for file in $$list; do echo $$file; done | \
1000           sed -e "s|^$$srcdirstrip/||;t" \
1001               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
1002         case $$dist_files in \
1003           */*) $(MKDIR_P) `echo "$$dist_files" | \
1004                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1005                            sort -u` ;; \
1006         esac; \
1007         for file in $$dist_files; do \
1008           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1009           if test -d $$d/$$file; then \
1010             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1011             if test -d "$(distdir)/$$file"; then \
1012               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1013             fi; \
1014             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1015               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1016               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1017             fi; \
1018             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1019           else \
1020             test -f "$(distdir)/$$file" \
1021             || cp -p $$d/$$file "$(distdir)/$$file" \
1022             || exit 1; \
1023           fi; \
1024         done
1025         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1026           if test "$$subdir" = .; then :; else \
1027             $(am__make_dryrun) \
1028               || test -d "$(distdir)/$$subdir" \
1029               || $(MKDIR_P) "$(distdir)/$$subdir" \
1030               || exit 1; \
1031             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
1032             $(am__relativize); \
1033             new_distdir=$$reldir; \
1034             dir1=$$subdir; dir2="$(top_distdir)"; \
1035             $(am__relativize); \
1036             new_top_distdir=$$reldir; \
1037             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
1038             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
1039             ($(am__cd) $$subdir && \
1040               $(MAKE) $(AM_MAKEFLAGS) \
1041                 top_distdir="$$new_top_distdir" \
1042                 distdir="$$new_distdir" \
1043                 am__remove_distdir=: \
1044                 am__skip_length_check=: \
1045                 am__skip_mode_fix=: \
1046                 distdir) \
1047               || exit 1; \
1048           fi; \
1049         done
1050         $(MAKE) $(AM_MAKEFLAGS) \
1051           top_distdir="$(top_distdir)" distdir="$(distdir)" \
1052           dist-hook
1053         -test -n "$(am__skip_mode_fix)" \
1054         || find "$(distdir)" -type d ! -perm -755 \
1055                 -exec chmod u+rwx,go+rx {} \; -o \
1056           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1057           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1058           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1059         || chmod -R a+r "$(distdir)"
1060 dist-gzip: distdir
1061         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1062         $(am__post_remove_distdir)
1063
1064 dist-bzip2: distdir
1065         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
1066         $(am__post_remove_distdir)
1067
1068 dist-lzip: distdir
1069         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
1070         $(am__post_remove_distdir)
1071
1072 dist-xz: distdir
1073         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1074         $(am__post_remove_distdir)
1075
1076 dist-tarZ: distdir
1077         @echo WARNING: "Support for distribution archives compressed with" \
1078                        "legacy program 'compress' is deprecated." >&2
1079         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1080         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1081         $(am__post_remove_distdir)
1082
1083 dist-shar: distdir
1084         @echo WARNING: "Support for shar distribution archives is" \
1085                        "deprecated." >&2
1086         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1087         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1088         $(am__post_remove_distdir)
1089
1090 dist-zip: distdir
1091         -rm -f $(distdir).zip
1092         zip -rq $(distdir).zip $(distdir)
1093         $(am__post_remove_distdir)
1094
1095 dist dist-all:
1096         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
1097         $(am__post_remove_distdir)
1098
1099 # This target untars the dist file and tries a VPATH configuration.  Then
1100 # it guarantees that the distribution is self-contained by making another
1101 # tarfile.
1102 distcheck: dist
1103         case '$(DIST_ARCHIVES)' in \
1104         *.tar.gz*) \
1105           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
1106         *.tar.bz2*) \
1107           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1108         *.tar.lz*) \
1109           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1110         *.tar.xz*) \
1111           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1112         *.tar.Z*) \
1113           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1114         *.shar.gz*) \
1115           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
1116         *.zip*) \
1117           unzip $(distdir).zip ;;\
1118         esac
1119         chmod -R a-w $(distdir)
1120         chmod u+w $(distdir)
1121         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
1122         chmod a-w $(distdir)
1123         test -d $(distdir)/_build || exit 0; \
1124         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1125           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1126           && am__cwd=`pwd` \
1127           && $(am__cd) $(distdir)/_build/sub \
1128           && ../../configure \
1129             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1130             $(DISTCHECK_CONFIGURE_FLAGS) \
1131             --srcdir=../.. --prefix="$$dc_install_base" \
1132           && $(MAKE) $(AM_MAKEFLAGS) \
1133           && $(MAKE) $(AM_MAKEFLAGS) dvi \
1134           && $(MAKE) $(AM_MAKEFLAGS) check \
1135           && $(MAKE) $(AM_MAKEFLAGS) install \
1136           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1137           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1138           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1139                 distuninstallcheck \
1140           && chmod -R a-w "$$dc_install_base" \
1141           && ({ \
1142                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1143                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1144                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1145                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1146                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1147               } || { rm -rf "$$dc_destdir"; exit 1; }) \
1148           && rm -rf "$$dc_destdir" \
1149           && $(MAKE) $(AM_MAKEFLAGS) dist \
1150           && rm -rf $(DIST_ARCHIVES) \
1151           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1152           && cd "$$am__cwd" \
1153           || exit 1
1154         $(am__post_remove_distdir)
1155         @(echo "$(distdir) archives ready for distribution: "; \
1156           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1157           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1158 distuninstallcheck:
1159         @test -n '$(distuninstallcheck_dir)' || { \
1160           echo 'ERROR: trying to run $@ with an empty' \
1161                '$$(distuninstallcheck_dir)' >&2; \
1162           exit 1; \
1163         }; \
1164         $(am__cd) '$(distuninstallcheck_dir)' || { \
1165           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
1166           exit 1; \
1167         }; \
1168         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1169            || { echo "ERROR: files left after uninstall:" ; \
1170                 if test -n "$(DESTDIR)"; then \
1171                   echo "  (check DESTDIR support)"; \
1172                 fi ; \
1173                 $(distuninstallcheck_listfiles) ; \
1174                 exit 1; } >&2
1175 distcleancheck: distclean
1176         @if test '$(srcdir)' = . ; then \
1177           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1178           exit 1 ; \
1179         fi
1180         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1181           || { echo "ERROR: files left in build directory after distclean:" ; \
1182                $(distcleancheck_listfiles) ; \
1183                exit 1; } >&2
1184 check-am: all-am
1185 check: check-recursive
1186 all-am: Makefile $(SCRIPTS) $(DATA)
1187 installdirs: installdirs-recursive
1188 installdirs-am:
1189         for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
1190           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1191         done
1192 install: install-recursive
1193 install-exec: install-exec-recursive
1194 install-data: install-data-recursive
1195 uninstall: uninstall-recursive
1196
1197 install-am: all-am
1198         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1199
1200 installcheck: installcheck-recursive
1201 install-strip:
1202         if test -z '$(STRIP)'; then \
1203           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1204             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1205               install; \
1206         else \
1207           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1208             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1209             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1210         fi
1211 mostlyclean-generic:
1212
1213 clean-generic:
1214         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1215
1216 distclean-generic:
1217         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1218         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1219
1220 maintainer-clean-generic:
1221         @echo "This command is intended for maintainers to use"
1222         @echo "it deletes files that may require special tools to rebuild."
1223 clean: clean-recursive
1224
1225 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
1226
1227 distclean: distclean-recursive
1228         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1229         -rm -f Makefile
1230 distclean-am: clean-am distclean-generic distclean-libtool \
1231         distclean-tags
1232
1233 dvi: dvi-recursive
1234
1235 dvi-am:
1236
1237 html-am:
1238
1239 info: info-recursive
1240
1241 info-am:
1242
1243 install-data-am: install-pkgconfigDATA
1244         @$(NORMAL_INSTALL)
1245         $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1246 install-dvi: install-dvi-recursive
1247
1248 install-dvi-am:
1249
1250 install-exec-am: install-binSCRIPTS
1251
1252 install-html: install-html-recursive
1253
1254 install-html-am:
1255
1256 install-info: install-info-recursive
1257
1258 install-info-am:
1259
1260 install-man:
1261
1262 install-pdf: install-pdf-recursive
1263
1264 install-pdf-am:
1265
1266 install-ps: install-ps-recursive
1267
1268 install-ps-am:
1269
1270 installcheck-am:
1271
1272 maintainer-clean: maintainer-clean-recursive
1273         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1274         -rm -rf $(top_srcdir)/autom4te.cache
1275         -rm -f Makefile
1276 maintainer-clean-am: distclean-am maintainer-clean-generic
1277
1278 mostlyclean: mostlyclean-recursive
1279
1280 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1281
1282 pdf-am:
1283
1284 ps: ps-recursive
1285
1286 ps-am:
1287
1288 uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
1289         @$(NORMAL_INSTALL)
1290         $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
1291 .MAKE: $(am__recursive_targets) install-am install-data-am \
1292         install-strip uninstall-am
1293
1294 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1295         am--refresh check check-am clean clean-cscope clean-generic \
1296         clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
1297         dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
1298         dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1299         distclean-generic distclean-libtool distclean-tags \
1300         distcleancheck distdir distuninstallcheck dvi dvi-am html \
1301         html-am info info-am install install-am install-binSCRIPTS \
1302         install-data install-data-am install-data-hook install-dvi \
1303         install-dvi-am install-exec install-exec-am install-html \
1304         install-html-am install-info install-info-am install-man \
1305         install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1306         install-ps-am install-strip installcheck installcheck-am \
1307         installdirs installdirs-am maintainer-clean \
1308         maintainer-clean-generic mostlyclean mostlyclean-generic \
1309         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
1310         uninstall-am uninstall-binSCRIPTS uninstall-hook \
1311         uninstall-pkgconfigDATA
1312
1313 .PRECIOUS: Makefile
1314
1315
1316 # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files
1317
1318 dist-hook:
1319         rm -rf $(top_builddir)/tests/log
1320         find $(distdir) -name "*.dist" -exec rm {} \;
1321         (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
1322         for file in $$distit; do \
1323           strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
1324           cp $$file $(distdir)$$strip; \
1325         done)
1326
1327 html:
1328         cd docs && make html
1329
1330 pdf:
1331         cd docs && make pdf
1332
1333 check: test examples check-docs
1334
1335 @CROSSCOMPILING_TRUE@test-full: test
1336 @CROSSCOMPILING_TRUE@test-torture: test
1337
1338 @CROSSCOMPILING_TRUE@test:
1339 @CROSSCOMPILING_TRUE@   @echo "NOTICE: we can't run the tests when cross-compiling!"
1340
1341 @CROSSCOMPILING_FALSE@test:
1342 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all quiet-test)
1343
1344 @CROSSCOMPILING_FALSE@test-full:
1345 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all full-test)
1346
1347 @CROSSCOMPILING_FALSE@test-torture:
1348 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all torture-test)
1349
1350 @CROSSCOMPILING_FALSE@test-am:
1351 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all am-test)
1352
1353 examples:
1354         @(cd docs/examples; $(MAKE) check)
1355
1356 check-docs:
1357         @(cd docs/libcurl; $(MAKE) check)
1358
1359 # This is a hook to have 'make clean' also clean up the docs and the tests
1360 # dir. The extra check for the Makefiles being present is necessary because
1361 # 'make distcheck' will make clean first in these directories _before_ it runs
1362 # this hook.
1363 clean-local:
1364         @(if test -f tests/Makefile; then cd tests; $(MAKE) clean; fi)
1365         @(if test -f docs/Makefile; then cd docs; $(MAKE) clean; fi)
1366
1367 #
1368 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
1369 # must contain the following line:
1370 # %_topdir /home/loic/local/rpm
1371 # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
1372 #
1373 # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
1374 #
1375 # If additional configure flags are needed to build the package, add the
1376 # following in ~/.rpmmacros
1377 # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
1378 # and run make rpm in the following way:
1379 # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
1380 #
1381
1382 rpms:
1383         $(MAKE) RPMDIST=curl rpm
1384         $(MAKE) RPMDIST=curl-ssl rpm
1385
1386 rpm:
1387         RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
1388         cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
1389         cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
1390         rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
1391         mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
1392         mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
1393
1394 #
1395 # Build a Solaris pkgadd format file
1396 # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
1397 # file (which ends up back in this directory).
1398 # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
1399 # pkgadd -d ./HAXXcurl-*
1400 #
1401
1402 # gak - libtool requires an absoulte directory, hence the pwd below...
1403 pkgadd:
1404         umask 022 ; \
1405         make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
1406         cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
1407         cd $(srcdir)/packages/Solaris && $(MAKE) package
1408
1409 #
1410 # Build a cygwin binary tarball installation file
1411 # resulting .tar.bz2 file will end up at packages/Win32/cygwin
1412 cygwinbin:
1413         $(MAKE) -C packages/Win32/cygwin cygwinbin
1414
1415 # We extend the standard install with a custom hook:
1416 install-data-hook:
1417         cd include && $(MAKE) install
1418         cd docs && $(MAKE) install
1419
1420 # We extend the standard uninstall with a custom hook:
1421 uninstall-hook:
1422         cd include && $(MAKE) uninstall
1423         cd docs && $(MAKE) uninstall
1424
1425 ca-bundle: lib/mk-ca-bundle.pl
1426         @echo "generating a fresh ca-bundle.crt"
1427         @perl $< -b -l -u lib/ca-bundle.crt
1428
1429 ca-firefox: lib/firefox-db2pem.sh
1430         @echo "generating a fresh ca-bundle.crt"
1431         ./lib/firefox-db2pem.sh lib/ca-bundle.crt
1432
1433 checksrc:
1434         cd lib && $(MAKE) checksrc
1435         cd src && $(MAKE) checksrc
1436         cd tests && $(MAKE) checksrc
1437         cd include/curl && $(MAKE) checksrc
1438         cd docs/examples && $(MAKE) checksrc
1439
1440 .PHONY: vc-ide
1441
1442 vc-ide: $(VC6_LIBDSP_DEPS) $(VC6_SRCDSP_DEPS) $(VC7_LIBVCPROJ_DEPS)     \
1443  $(VC7_SRCVCPROJ_DEPS) $(VC71_LIBVCPROJ_DEPS) $(VC71_SRCVCPROJ_DEPS)    \
1444  $(VC8_LIBVCPROJ_DEPS) $(VC8_SRCVCPROJ_DEPS) $(VC9_LIBVCPROJ_DEPS)      \
1445  $(VC9_SRCVCPROJ_DEPS) $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS)  \
1446  $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS)        \
1447  $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS)
1448         @(win32_lib_srcs='$(LIB_CFILES)'; \
1449         win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
1450         win32_lib_rc='$(LIB_RCFILES)'; \
1451         win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \
1452         win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \
1453         win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
1454         win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
1455         win32_src_srcs='$(CURL_CFILES)'; \
1456         win32_src_hdrs='$(CURL_HFILES)'; \
1457         win32_src_rc='$(CURL_RCFILES)'; \
1458         win32_src_x_srcs='$(CURLX_CFILES)'; \
1459         win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
1460         \
1461         sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
1462         sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
1463         sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \
1464         sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \
1465         sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
1466         sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
1467         sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
1468         sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
1469         sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
1470         sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
1471         \
1472         awk_code='\
1473 function gen_element(type, dir, file)\
1474 {\
1475   sub(/vauth\//, "", file);\
1476   sub(/vtls\//, "", file);\
1477 \
1478   spaces="    ";\
1479   if(dir == "lib\\vauth" || dir == "lib\\vtls")\
1480     tabs="                              ";\
1481   else\
1482     tabs="                      ";\
1483 \
1484   if(type == "dsp") {\
1485     printf("# Begin Source File\r\n");\
1486     printf("\r\n");\
1487     printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
1488     printf("# End Source File\r\n");\
1489   }\
1490   else if(type == "vcproj1") {\
1491     printf("%s<File\r\n", tabs);\
1492     printf("%s  RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
1493            tabs, dir, file);\
1494     printf("%s</File>\r\n", tabs);\
1495   }\
1496   else if(type == "vcproj2") {\
1497     printf("%s<File\r\n", tabs);\
1498     printf("%s  RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
1499            tabs, dir, file);\
1500     printf("%s>\r\n", tabs);\
1501     printf("%s</File>\r\n", tabs);\
1502   }\
1503   else if(type == "vcxproj") {\
1504     i = index(file, ".");\
1505     ext = substr(file, i == 0 ? 0 : i + 1);\
1506 \
1507     if(ext == "c")\
1508       printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1509              spaces, dir, file);\
1510     else if(ext == "h")\
1511       printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1512              spaces, dir, file);\
1513     else if(ext == "rc")\
1514       printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1515       spaces, dir, file);\
1516   }\
1517 }\
1518 \
1519 {\
1520 \
1521   if($$0 == "CURL_LIB_C_FILES") {\
1522     split(lib_srcs, arr);\
1523     for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1524   }\
1525   else if($$0 == "CURL_LIB_H_FILES") {\
1526     split(lib_hdrs, arr);\
1527     for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1528   }\
1529   else if($$0 == "CURL_LIB_RC_FILES") {\
1530     split(lib_rc, arr);\
1531     for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1532   }\
1533   else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\
1534     split(lib_vauth_srcs, arr);\
1535     for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
1536   }\
1537   else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\
1538     split(lib_vauth_hdrs, arr);\
1539     for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
1540   }\
1541   else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
1542     split(lib_vtls_srcs, arr);\
1543     for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1544   }\
1545   else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
1546     split(lib_vtls_hdrs, arr);\
1547     for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1548   }\
1549   else if($$0 == "CURL_SRC_C_FILES") {\
1550     split(src_srcs, arr);\
1551     for(val in arr) gen_element(proj_type, "src", arr[val]);\
1552   }\
1553   else if($$0 == "CURL_SRC_H_FILES") {\
1554     split(src_hdrs, arr);\
1555     for(val in arr) gen_element(proj_type, "src", arr[val]);\
1556   }\
1557   else if($$0 == "CURL_SRC_RC_FILES") {\
1558     split(src_rc, arr);\
1559     for(val in arr) gen_element(proj_type, "src", arr[val]);\
1560   }\
1561   else if($$0 == "CURL_SRC_X_C_FILES") {\
1562     split(src_x_srcs, arr);\
1563     for(val in arr) {\
1564       sub(/..\/lib\//, "", arr[val]);\
1565       gen_element(proj_type, "lib", arr[val]);\
1566     }\
1567   }\
1568   else if($$0 == "CURL_SRC_X_H_FILES") {\
1569     split(src_x_hdrs, arr);\
1570     for(val in arr) {\
1571       sub(/..\/lib\//, "", arr[val]);\
1572       gen_element(proj_type, "lib", arr[val]);\
1573     }\
1574   }\
1575   else\
1576     printf("%s\r\n", $$0);\
1577 }';\
1578         \
1579         echo "generating '$(VC6_LIBDSP)'"; \
1580         awk -v proj_type=dsp \
1581                 -v lib_srcs="$$sorted_lib_srcs" \
1582                 -v lib_hdrs="$$sorted_lib_hdrs" \
1583                 -v lib_rc="$$win32_lib_rc" \
1584                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1585                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1586                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1587                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1588                 "$$awk_code" $(srcdir)/$(VC6_LIBTMPL) > $(VC6_LIBDSP) || { exit 1; }; \
1589         \
1590         echo "generating '$(VC6_SRCDSP)'"; \
1591         awk -v proj_type=dsp \
1592                 -v src_srcs="$$sorted_src_srcs" \
1593                 -v src_hdrs="$$sorted_src_hdrs" \
1594                 -v src_rc="$$win32_src_rc" \
1595                 -v src_x_srcs="$$sorted_src_x_srcs" \
1596                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1597                 "$$awk_code" $(srcdir)/$(VC6_SRCTMPL) > $(VC6_SRCDSP) || { exit 1; }; \
1598         \
1599         echo "generating '$(VC7_LIBVCPROJ)'"; \
1600         awk -v proj_type=vcproj1 \
1601                 -v lib_srcs="$$sorted_lib_srcs" \
1602                 -v lib_hdrs="$$sorted_lib_hdrs" \
1603                 -v lib_rc="$$win32_lib_rc" \
1604                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1605                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1606                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1607                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1608                 "$$awk_code" $(srcdir)/$(VC7_LIBTMPL) > $(VC7_LIBVCPROJ) || { exit 1; }; \
1609         \
1610         echo "generating '$(VC7_SRCVCPROJ)'"; \
1611         awk -v proj_type=vcproj1 \
1612                 -v src_srcs="$$sorted_src_srcs" \
1613                 -v src_hdrs="$$sorted_src_hdrs" \
1614                 -v src_rc="$$win32_src_rc" \
1615                 -v src_x_srcs="$$sorted_src_x_srcs" \
1616                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1617                 "$$awk_code" $(srcdir)/$(VC7_SRCTMPL) > $(VC7_SRCVCPROJ) || { exit 1; }; \
1618         \
1619         echo "generating '$(VC71_LIBVCPROJ)'"; \
1620         awk -v proj_type=vcproj1 \
1621                 -v lib_srcs="$$sorted_lib_srcs" \
1622                 -v lib_hdrs="$$sorted_lib_hdrs" \
1623                 -v lib_rc="$$win32_lib_rc" \
1624                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1625                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1626                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1627                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1628                 "$$awk_code" $(srcdir)/$(VC71_LIBTMPL) > $(VC71_LIBVCPROJ) || { exit 1; }; \
1629         \
1630         echo "generating '$(VC71_SRCVCPROJ)'"; \
1631         awk -v proj_type=vcproj1 \
1632                 -v src_srcs="$$sorted_src_srcs" \
1633                 -v src_hdrs="$$sorted_src_hdrs" \
1634                 -v src_rc="$$win32_src_rc" \
1635                 -v src_x_srcs="$$sorted_src_x_srcs" \
1636                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1637                 "$$awk_code" $(srcdir)/$(VC71_SRCTMPL) > $(VC71_SRCVCPROJ) || { exit 1; }; \
1638         \
1639         echo "generating '$(VC8_LIBVCPROJ)'"; \
1640         awk -v proj_type=vcproj2 \
1641                 -v lib_srcs="$$sorted_lib_srcs" \
1642                 -v lib_hdrs="$$sorted_lib_hdrs" \
1643                 -v lib_rc="$$win32_lib_rc" \
1644                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1645                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1646                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1647                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1648                 "$$awk_code" $(srcdir)/$(VC8_LIBTMPL) > $(VC8_LIBVCPROJ) || { exit 1; }; \
1649         \
1650         echo "generating '$(VC8_SRCVCPROJ)'"; \
1651         awk -v proj_type=vcproj2 \
1652                 -v src_srcs="$$sorted_src_srcs" \
1653                 -v src_hdrs="$$sorted_src_hdrs" \
1654                 -v src_rc="$$win32_src_rc" \
1655                 -v src_x_srcs="$$sorted_src_x_srcs" \
1656                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1657                 "$$awk_code" $(srcdir)/$(VC8_SRCTMPL) > $(VC8_SRCVCPROJ) || { exit 1; }; \
1658         \
1659         echo "generating '$(VC9_LIBVCPROJ)'"; \
1660         awk -v proj_type=vcproj2 \
1661                 -v lib_srcs="$$sorted_lib_srcs" \
1662                 -v lib_hdrs="$$sorted_lib_hdrs" \
1663                 -v lib_rc="$$win32_lib_rc" \
1664                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1665                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1666                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1667                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1668                 "$$awk_code" $(srcdir)/$(VC9_LIBTMPL) > $(VC9_LIBVCPROJ) || { exit 1; }; \
1669         \
1670         echo "generating '$(VC9_SRCVCPROJ)'"; \
1671         awk -v proj_type=vcproj2 \
1672                 -v src_srcs="$$sorted_src_srcs" \
1673                 -v src_hdrs="$$sorted_src_hdrs" \
1674                 -v src_rc="$$win32_src_rc" \
1675                 -v src_x_srcs="$$sorted_src_x_srcs" \
1676                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1677                 "$$awk_code" $(srcdir)/$(VC9_SRCTMPL) > $(VC9_SRCVCPROJ) || { exit 1; }; \
1678         \
1679         echo "generating '$(VC10_LIBVCXPROJ)'"; \
1680         awk -v proj_type=vcxproj \
1681                 -v lib_srcs="$$sorted_lib_srcs" \
1682                 -v lib_hdrs="$$sorted_lib_hdrs" \
1683                 -v lib_rc="$$win32_lib_rc" \
1684                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1685                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1686                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1687                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1688                 "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \
1689         \
1690         echo "generating '$(VC10_SRCVCXPROJ)'"; \
1691         awk -v proj_type=vcxproj \
1692                 -v src_srcs="$$sorted_src_srcs" \
1693                 -v src_hdrs="$$sorted_src_hdrs" \
1694                 -v src_rc="$$win32_src_rc" \
1695                 -v src_x_srcs="$$sorted_src_x_srcs" \
1696                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1697                 "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \
1698         \
1699         echo "generating '$(VC11_LIBVCXPROJ)'"; \
1700         awk -v proj_type=vcxproj \
1701                 -v lib_srcs="$$sorted_lib_srcs" \
1702                 -v lib_hdrs="$$sorted_lib_hdrs" \
1703                 -v lib_rc="$$win32_lib_rc" \
1704                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1705                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1706                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1707                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1708                 "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \
1709         \
1710         echo "generating '$(VC11_SRCVCXPROJ)'"; \
1711         awk -v proj_type=vcxproj \
1712                 -v src_srcs="$$sorted_src_srcs" \
1713                 -v src_hdrs="$$sorted_src_hdrs" \
1714                 -v src_rc="$$win32_src_rc" \
1715                 -v src_x_srcs="$$sorted_src_x_srcs" \
1716                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1717                 "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \
1718         \
1719         echo "generating '$(VC12_LIBVCXPROJ)'"; \
1720         awk -v proj_type=vcxproj \
1721                 -v lib_srcs="$$sorted_lib_srcs" \
1722                 -v lib_hdrs="$$sorted_lib_hdrs" \
1723                 -v lib_rc="$$win32_lib_rc" \
1724                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1725                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1726                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1727                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1728                 "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \
1729         \
1730         echo "generating '$(VC12_SRCVCXPROJ)'"; \
1731         awk -v proj_type=vcxproj \
1732                 -v src_srcs="$$sorted_src_srcs" \
1733                 -v src_hdrs="$$sorted_src_hdrs" \
1734                 -v src_rc="$$win32_src_rc" \
1735                 -v src_x_srcs="$$sorted_src_x_srcs" \
1736                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1737                 "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \
1738         \
1739         echo "generating '$(VC14_LIBVCXPROJ)'"; \
1740         awk -v proj_type=vcxproj \
1741                 -v lib_srcs="$$sorted_lib_srcs" \
1742                 -v lib_hdrs="$$sorted_lib_hdrs" \
1743                 -v lib_rc="$$win32_lib_rc" \
1744                 -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
1745                 -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
1746                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1747                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1748                 "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \
1749         \
1750         echo "generating '$(VC14_SRCVCXPROJ)'"; \
1751         awk -v proj_type=vcxproj \
1752                 -v src_srcs="$$sorted_src_srcs" \
1753                 -v src_hdrs="$$sorted_src_hdrs" \
1754                 -v src_rc="$$win32_src_rc" \
1755                 -v src_x_srcs="$$sorted_src_x_srcs" \
1756                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1757                 "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; };)
1758
1759 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1760 # Otherwise a system limit (for SysV at least) may be exceeded.
1761 .NOEXPORT: