1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
17 #***************************************************************************
19 # Project ___| | | | _ \| |
21 # | (__| |_| | _ <| |___
22 # \___|\___/|_| \_\_____|
24 # Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
26 # This software is licensed as described in the file COPYING, which
27 # you should have received as part of this distribution. The terms
28 # are also available at http://curl.haxx.se/docs/copyright.html.
30 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
31 # copies of the Software, and permit persons to whom the Software is
32 # furnished to do so, under the terms of the COPYING file.
34 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
35 # KIND, either express or implied.
37 ###########################################################################
39 #***************************************************************************
41 # Project ___| | | | _ \| |
43 # | (__| |_| | _ <| |___
44 # \___|\___/|_| \_\_____|
46 # Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
48 # This software is licensed as described in the file COPYING, which
49 # you should have received as part of this distribution. The terms
50 # are also available at http://curl.haxx.se/docs/copyright.html.
52 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
53 # copies of the Software, and permit persons to whom the Software is
54 # furnished to do so, under the terms of the COPYING file.
56 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
57 # KIND, either express or implied.
59 ###########################################################################
62 # Using the backslash as line continuation character might be problematic
63 # with some make flavours, as Watcom's wmake showed us already. If we
64 # ever want to change this in a portable manner then we should consider
65 # this idea (posted to the libcurl list by Adam Kellas):
66 # CSRC1 = file1.c file2.c file3.c
67 # CSRC2 = file4.c file5.c file6.c
68 # CSOURCES = $(CSRC1) $(CSRC2)
72 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
73 am__make_running_with_option = \
74 case $${target_option-} in \
76 *) echo "am__make_running_with_option: internal error: invalid" \
77 "target option '$${target_option-}' specified" >&2; \
81 sane_makeflags=$$MAKEFLAGS; \
82 if $(am__is_gnu_make); then \
83 sane_makeflags=$$MFLAGS; \
88 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
89 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
95 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
97 for flg in $$sane_makeflags; do \
98 test $$skip_next = yes && { skip_next=no; continue; }; \
100 *=*|--*) continue;; \
101 -*I) strip_trailopt 'I'; skip_next=yes;; \
102 -*I?*) strip_trailopt 'I';; \
103 -*O) strip_trailopt 'O'; skip_next=yes;; \
104 -*O?*) strip_trailopt 'O';; \
105 -*l) strip_trailopt 'l'; skip_next=yes;; \
106 -*l?*) strip_trailopt 'l';; \
107 -[dEDm]) skip_next=yes;; \
108 -[JT]) skip_next=yes;; \
111 *$$target_option*) has_opt=yes; break;; \
115 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
116 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
117 pkgdatadir = $(datadir)/@PACKAGE@
118 pkgincludedir = $(includedir)/@PACKAGE@
119 pkglibdir = $(libdir)/@PACKAGE@
120 pkglibexecdir = $(libexecdir)/@PACKAGE@
121 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
122 install_sh_DATA = $(install_sh) -c -m 644
123 install_sh_PROGRAM = $(install_sh) -c
124 install_sh_SCRIPT = $(install_sh) -c
125 INSTALL_HEADER = $(INSTALL_DATA)
126 transform = $(program_transform_name)
133 build_triplet = @build@
134 host_triplet = @host@
135 DIST_COMMON = $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc \
136 $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
137 $(top_srcdir)/configure $(am__configure_deps) mkinstalldirs \
138 $(srcdir)/curl-config.in $(srcdir)/libcurl.pc.in COPYING \
139 README compile config.guess config.sub depcomp install-sh \
142 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
143 am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \
144 $(top_srcdir)/m4/curl-confopts.m4 \
145 $(top_srcdir)/m4/curl-functions.m4 \
146 $(top_srcdir)/m4/curl-openssl.m4 \
147 $(top_srcdir)/m4/curl-override.m4 \
148 $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
149 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
150 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
151 $(top_srcdir)/m4/xc-am-iface.m4 \
152 $(top_srcdir)/m4/xc-cc-check.m4 \
153 $(top_srcdir)/m4/xc-lt-iface.m4 \
154 $(top_srcdir)/m4/xc-translit.m4 \
155 $(top_srcdir)/m4/xc-val-flgs.m4 \
156 $(top_srcdir)/m4/zz40-xc-ovr.m4 \
157 $(top_srcdir)/m4/zz50-xc-ovr.m4 \
158 $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
159 $(top_srcdir)/configure.ac
160 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
162 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
163 configure.lineno config.status.lineno
164 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
165 CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
166 $(top_builddir)/include/curl/curlbuild.h
167 CONFIG_CLEAN_FILES = curl-config libcurl.pc
168 CONFIG_CLEAN_VPATH_FILES =
169 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
170 am__vpath_adj = case $$p in \
171 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
174 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
176 am__nobase_strip_setup = \
177 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
179 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
180 am__nobase_list = $(am__nobase_strip_setup); \
181 for p in $$list; do echo "$$p $$p"; done | \
182 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
183 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
184 if (++n[$$2] == $(am__install_max)) \
185 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
186 END { for (dir in files) print dir, files[dir] }'
188 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
189 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
190 am__uninstall_files_from_dir = { \
192 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
193 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
194 $(am__cd) "$$dir" && rm -f $$files; }; \
196 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
197 SCRIPTS = $(bin_SCRIPTS)
198 AM_V_P = $(am__v_P_@AM_V@)
199 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
202 AM_V_GEN = $(am__v_GEN_@AM_V@)
203 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
204 am__v_GEN_0 = @echo " GEN " $@;
206 AM_V_at = $(am__v_at_@AM_V@)
207 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
212 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
213 ctags-recursive dvi-recursive html-recursive info-recursive \
214 install-data-recursive install-dvi-recursive \
215 install-exec-recursive install-html-recursive \
216 install-info-recursive install-pdf-recursive \
217 install-ps-recursive install-recursive installcheck-recursive \
218 installdirs-recursive pdf-recursive ps-recursive \
219 tags-recursive uninstall-recursive
220 am__can_run_installinfo = \
221 case $$AM_UPDATE_INFO_DIR in \
223 *) (install-info --version) >/dev/null 2>&1;; \
225 DATA = $(pkgconfig_DATA)
226 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
227 distclean-recursive maintainer-clean-recursive
228 am__recursive_targets = \
229 $(RECURSIVE_TARGETS) \
230 $(RECURSIVE_CLEAN_TARGETS) \
231 $(am__extra_recursive_targets)
232 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
233 cscope distdir dist dist-all distcheck
234 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
235 # Read a list of newline-separated strings from the standard input,
236 # and print each of them once, without duplicates. Input order is
238 am__uniquify_input = $(AWK) '\
239 BEGIN { nonempty = 0; } \
240 { items[$$0] = 1; nonempty = 1; } \
241 END { if (nonempty) { for (i in items) print i; }; } \
243 # Make sure the list of sources is unique. This is necessary because,
244 # e.g., the same source file might be shared among _SOURCES variables
245 # for different programs/libraries.
246 am__define_uniq_tagged_files = \
247 list='$(am__tagged_files)'; \
248 unique=`for i in $$list; do \
249 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
250 done | $(am__uniquify_input)`
254 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
255 distdir = $(PACKAGE)-$(VERSION)
256 top_distdir = $(distdir)
257 am__remove_distdir = \
258 if test -d "$(distdir)"; then \
259 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
260 && rm -rf "$(distdir)" \
261 || { sleep 5 && rm -rf "$(distdir)"; }; \
263 am__post_remove_distdir = $(am__remove_distdir)
266 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
267 sed_rest='s,^[^/]*/*,,'; \
268 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
269 sed_butlast='s,/*[^/]*$$,,'; \
270 while test -n "$$dir1"; do \
271 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
272 if test "$$first" != "."; then \
273 if test "$$first" = ".."; then \
274 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
275 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
277 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
278 if test "$$first2" = "$$first"; then \
279 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
283 dir0="$$dir0"/"$$first"; \
286 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
289 DIST_ARCHIVES = $(distdir).tar.gz
291 DIST_TARGETS = dist-gzip
292 distuninstallcheck_listfiles = find . -type f -print
293 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
294 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
295 distcleancheck_listfiles = find . -type f -print
298 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
301 AUTOCONF = @AUTOCONF@
302 AUTOHEADER = @AUTOHEADER@
303 AUTOMAKE = @AUTOMAKE@
305 BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
307 CCDEPMODE = @CCDEPMODE@
309 CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
310 CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
312 CPPFLAGS = @CPPFLAGS@
313 CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
314 CURLVERSION = @CURLVERSION@
315 CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
316 CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
317 CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
318 CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
319 CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
320 CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
321 CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
322 CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
323 CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
324 CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
325 CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
326 CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
327 CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
328 CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
329 CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
330 CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
331 CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
332 CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
333 CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
334 CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
335 CYGPATH_W = @CYGPATH_W@
339 DSYMUTIL = @DSYMUTIL@
345 ENABLE_SHARED = @ENABLE_SHARED@
346 ENABLE_STATIC = @ENABLE_STATIC@
350 HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
351 HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
352 HAVE_LIBZ = @HAVE_LIBZ@
353 HAVE_SSLEAY_SRP = @HAVE_SSLEAY_SRP@
354 IDN_ENABLED = @IDN_ENABLED@
356 INSTALL_DATA = @INSTALL_DATA@
357 INSTALL_PROGRAM = @INSTALL_PROGRAM@
358 INSTALL_SCRIPT = @INSTALL_SCRIPT@
359 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
360 IPV6_ENABLED = @IPV6_ENABLED@
363 LIBCURL_LIBS = @LIBCURL_LIBS@
364 LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
365 LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
366 LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
372 LTLIBOBJS = @LTLIBOBJS@
374 MAKEINFO = @MAKEINFO@
375 MANIFEST_TOOL = @MANIFEST_TOOL@
381 NSS_LIBS = @NSS_LIBS@
387 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
388 PACKAGE_NAME = @PACKAGE_NAME@
389 PACKAGE_STRING = @PACKAGE_STRING@
390 PACKAGE_TARNAME = @PACKAGE_TARNAME@
391 PACKAGE_URL = @PACKAGE_URL@
392 PACKAGE_VERSION = @PACKAGE_VERSION@
393 PATH_SEPARATOR = @PATH_SEPARATOR@
395 PKGADD_NAME = @PKGADD_NAME@
396 PKGADD_PKG = @PKGADD_PKG@
397 PKGADD_VENDOR = @PKGADD_VENDOR@
398 PKGCONFIG = @PKGCONFIG@
399 RANDOM_FILE = @RANDOM_FILE@
401 REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
403 SET_MAKE = @SET_MAKE@
405 SSL_ENABLED = @SSL_ENABLED@
407 SUPPORT_FEATURES = @SUPPORT_FEATURES@
408 SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
409 USE_ARES = @USE_ARES@
410 USE_AXTLS = @USE_AXTLS@
411 USE_CYASSL = @USE_CYASSL@
412 USE_DARWINSSL = @USE_DARWINSSL@
413 USE_GNUTLS = @USE_GNUTLS@
414 USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
415 USE_LIBRTMP = @USE_LIBRTMP@
416 USE_LIBSSH2 = @USE_LIBSSH2@
417 USE_NGHTTP2 = @USE_NGHTTP2@
419 USE_OPENLDAP = @USE_OPENLDAP@
420 USE_POLARSSL = @USE_POLARSSL@
421 USE_SCHANNEL = @USE_SCHANNEL@
422 USE_SSLEAY = @USE_SSLEAY@
423 USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
424 USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
426 VERSIONNUM = @VERSIONNUM@
427 ZLIB_LIBS = @ZLIB_LIBS@
428 abs_builddir = @abs_builddir@
429 abs_srcdir = @abs_srcdir@
430 abs_top_builddir = @abs_top_builddir@
431 abs_top_srcdir = @abs_top_srcdir@
432 ac_ct_AR = @ac_ct_AR@
433 ac_ct_CC = @ac_ct_CC@
434 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
435 am__include = @am__include@
436 am__leading_dot = @am__leading_dot@
437 am__quote = @am__quote@
439 am__untar = @am__untar@
442 build_alias = @build_alias@
443 build_cpu = @build_cpu@
444 build_os = @build_os@
445 build_vendor = @build_vendor@
446 builddir = @builddir@
448 datarootdir = @datarootdir@
451 exec_prefix = @exec_prefix@
453 host_alias = @host_alias@
454 host_cpu = @host_cpu@
456 host_vendor = @host_vendor@
458 includedir = @includedir@
460 install_sh = @install_sh@
462 libexecdir = @libexecdir@
464 localedir = @localedir@
465 localstatedir = @localstatedir@
468 oldincludedir = @oldincludedir@
471 program_transform_name = @program_transform_name@
474 sharedstatedir = @sharedstatedir@
477 sysconfdir = @sysconfdir@
478 target_alias = @target_alias@
479 top_build_prefix = @top_build_prefix@
480 top_builddir = @top_builddir@
481 top_srcdir = @top_srcdir@
482 AUTOMAKE_OPTIONS = foreign
483 ACLOCAL_AMFLAGS = -I m4
484 CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in \
485 CMake/CurlTests.c CMake/FindGSS.cmake CMake/OtherTests.cmake \
486 CMake/Platforms/WindowsCache.cmake CMake/Utilities.cmake \
487 include/curl/curlbuild.h.cmake CMake/Macros.cmake
489 VC6_LIBTMPL = projects/Windows/VC6/lib/libcurl.tmpl
490 VC6_LIBDSP = projects/Windows/VC6/lib/libcurl.dsp
491 VC6_LIBDSP_DEPS = $(VC6_LIBTMPL) Makefile.am lib/Makefile.inc
492 VC6_SRCTMPL = projects/Windows/VC6/src/curlsrc.tmpl
493 VC6_SRCDSP = projects/Windows/VC6/src/curlsrc.dsp
494 VC6_SRCDSP_DEPS = $(VC6_SRCTMPL) Makefile.am src/Makefile.inc
495 VC7_LIBTMPL = projects/Windows/VC7/lib/libcurl.tmpl
496 VC7_LIBVCPROJ = projects/Windows/VC7/lib/libcurl.vcproj
497 VC7_LIBVCPROJ_DEPS = $(VC7_LIBTMPL) Makefile.am lib/Makefile.inc
498 VC7_SRCTMPL = projects/Windows/VC7/src/curlsrc.tmpl
499 VC7_SRCVCPROJ = projects/Windows/VC7/src/curlsrc.vcproj
500 VC7_SRCVCPROJ_DEPS = $(VC7_SRCTMPL) Makefile.am src/Makefile.inc
501 VC71_LIBTMPL = projects/Windows/VC7.1/lib/libcurl.tmpl
502 VC71_LIBVCPROJ = projects/Windows/VC7.1/lib/libcurl.vcproj
503 VC71_LIBVCPROJ_DEPS = $(VC71_LIBTMPL) Makefile.am lib/Makefile.inc
504 VC71_SRCTMPL = projects/Windows/VC7.1/src/curlsrc.tmpl
505 VC71_SRCVCPROJ = projects/Windows/VC7.1/src/curlsrc.vcproj
506 VC71_SRCVCPROJ_DEPS = $(VC71_SRCTMPL) Makefile.am src/Makefile.inc
507 VC8_LIBTMPL = projects/Windows/VC8/lib/libcurl.tmpl
508 VC8_LIBVCPROJ = projects/Windows/VC8/lib/libcurl.vcproj
509 VC8_LIBVCPROJ_DEPS = $(VC8_LIBTMPL) Makefile.am lib/Makefile.inc
510 VC8_SRCTMPL = projects/Windows/VC8/src/curlsrc.tmpl
511 VC8_SRCVCPROJ = projects/Windows/VC8/src/curlsrc.vcproj
512 VC8_SRCVCPROJ_DEPS = $(VC8_SRCTMPL) Makefile.am src/Makefile.inc
513 VC9_LIBTMPL = projects/Windows/VC9/lib/libcurl.tmpl
514 VC9_LIBVCPROJ = projects/Windows/VC9/lib/libcurl.vcproj
515 VC9_LIBVCPROJ_DEPS = $(VC9_LIBTMPL) Makefile.am lib/Makefile.inc
516 VC9_SRCTMPL = projects/Windows/VC9/src/curlsrc.tmpl
517 VC9_SRCVCPROJ = projects/Windows/VC9/src/curlsrc.vcproj
518 VC9_SRCVCPROJ_DEPS = $(VC9_SRCTMPL) Makefile.am src/Makefile.inc
519 VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl
520 VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj
521 VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc
522 VC10_SRCTMPL = projects/Windows/VC10/src/curlsrc.tmpl
523 VC10_SRCVCXPROJ = projects/Windows/VC10/src/curlsrc.vcxproj
524 VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc
525 VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl
526 VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj
527 VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc
528 VC11_SRCTMPL = projects/Windows/VC11/src/curlsrc.tmpl
529 VC11_SRCVCXPROJ = projects/Windows/VC11/src/curlsrc.vcxproj
530 VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc
531 VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl
532 VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj
533 VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc
534 VC12_SRCTMPL = projects/Windows/VC12/src/curlsrc.tmpl
535 VC12_SRCVCXPROJ = projects/Windows/VC12/src/curlsrc.vcxproj
536 VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc
537 VC_DIST = projects/README \
538 projects/build-openssl.bat \
539 projects/checksrc.bat \
540 projects/Windows/VC6/curl.dsw \
541 projects/Windows/VC6/lib/libcurl.dsw $(VC6_LIBDSP) \
542 projects/Windows/VC6/src/curlsrc.dsw $(VC6_SRCDSP) \
543 projects/Windows/VC7/curl.sln \
544 projects/Windows/VC7/lib/libcurl.sln $(VC7_LIBVCPROJ) \
545 projects/Windows/VC7/src/curlsrc.sln $(VC7_SRCVCPROJ) \
546 projects/Windows/VC7.1/curl.sln \
547 projects/Windows/VC7.1/lib/libcurl.sln $(VC71_LIBVCPROJ) \
548 projects/Windows/VC7.1/src/curlsrc.sln $(VC71_SRCVCPROJ) \
549 projects/Windows/VC8/curl.sln \
550 projects/Windows/VC8/lib/libcurl.sln $(VC8_LIBVCPROJ) \
551 projects/Windows/VC8/src/curlsrc.sln $(VC8_SRCVCPROJ) \
552 projects/Windows/VC9/curl.sln \
553 projects/Windows/VC9/lib/libcurl.sln $(VC9_LIBVCPROJ) \
554 projects/Windows/VC9/src/curlsrc.sln $(VC9_SRCVCPROJ) \
555 projects/Windows/VC10/curl.sln \
556 projects/Windows/VC10/lib/libcurl.sln $(VC10_LIBVCXPROJ) \
557 projects/Windows/VC10/src/curlsrc.sln $(VC10_SRCVCXPROJ) \
558 projects/Windows/VC11/curl.sln \
559 projects/Windows/VC11/lib/libcurl.sln $(VC11_LIBVCXPROJ) \
560 projects/Windows/VC11/src/curlsrc.sln $(VC11_SRCVCXPROJ) \
561 projects/Windows/VC12/curl.sln \
562 projects/Windows/VC12/lib/libcurl.sln $(VC12_LIBVCXPROJ) \
563 projects/Windows/VC12/src/curlsrc.sln $(VC12_SRCVCXPROJ)
565 WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat \
566 winbuild/MakefileBuild.vc winbuild/Makefile.vc \
567 winbuild/Makefile.msvc.names
569 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \
570 RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework \
571 $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST) lib/libcurl.vers.in
573 CLEANFILES = $(VC6_LIBDSP) $(VC6_SRCDSP) $(VC7_LIBVCPROJ) $(VC7_SRCVCPROJ) \
574 $(VC71_LIBVCPROJ) $(VC71_SRCVCPROJ) $(VC8_LIBVCPROJ) $(VC8_SRCVCPROJ) \
575 $(VC9_LIBVCPROJ) $(VC9_SRCVCPROJ) $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ) \
576 $(VC11_LIBVCXPROJ) $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ)
578 bin_SCRIPTS = curl-config
579 SUBDIRS = lib src include
580 DIST_SUBDIRS = $(SUBDIRS) tests packages docs
581 pkgconfigdir = $(libdir)/pkgconfig
582 pkgconfig_DATA = libcurl.pc
583 LIB_VTLS_CFILES = vtls/openssl.c vtls/gtls.c vtls/vtls.c vtls/nss.c \
584 vtls/polarssl.c vtls/polarssl_threadlock.c vtls/axtls.c \
585 vtls/cyassl.c vtls/curl_schannel.c vtls/curl_darwinssl.c vtls/gskit.c
587 LIB_VTLS_HFILES = vtls/openssl.h vtls/vtls.h vtls/gtls.h \
588 vtls/nssg.h vtls/polarssl.h vtls/polarssl_threadlock.h vtls/axtls.h \
589 vtls/cyassl.h vtls/curl_schannel.h vtls/curl_darwinssl.h vtls/gskit.h
591 LIB_CFILES = file.c timeval.c base64.c hostip.c progress.c formdata.c \
592 cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c \
593 ldap.c version.c getenv.c escape.c mprintf.c telnet.c netrc.c \
594 getinfo.c transfer.c strequal.c easy.c security.c curl_fnmatch.c \
595 fileinfo.c ftplistparser.c wildcard.c krb5.c memdebug.c http_chunks.c \
596 strtok.c connect.c llist.c hash.c multi.c content_encoding.c share.c \
597 http_digest.c md4.c md5.c http_negotiate.c inet_pton.c strtoofft.c \
598 strerror.c amigaos.c hostasyn.c hostip4.c hostip6.c hostsyn.c \
599 inet_ntop.c parsedate.c select.c tftp.c splay.c strdup.c socks.c \
600 ssh.c rawstr.c curl_addrinfo.c socks_gssapi.c socks_sspi.c \
601 curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c \
602 pingpong.c rtsp.c curl_threads.c warnless.c hmac.c curl_rtmp.c \
603 openldap.c curl_gethostname.c gopher.c idn_win32.c \
604 http_negotiate_sspi.c http_proxy.c non-ascii.c asyn-ares.c \
605 asyn-thread.c curl_gssapi.c curl_ntlm.c curl_ntlm_wb.c \
606 curl_ntlm_core.c curl_ntlm_msgs.c curl_sasl.c curl_multibyte.c \
607 hostcheck.c bundles.c conncache.c pipeline.c dotdot.c x509asn1.c \
608 http2.c curl_sasl_sspi.c smb.c curl_sasl_gssapi.c curl_endian.c
610 LIB_HFILES = arpa_telnet.h netrc.h file.h timeval.h hostip.h progress.h \
611 formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h if2ip.h \
612 speedcheck.h urldata.h curl_ldap.h escape.h telnet.h getinfo.h \
613 strequal.h curl_sec.h memdebug.h http_chunks.h curl_fnmatch.h \
614 wildcard.h fileinfo.h ftplistparser.h strtok.h connect.h llist.h \
615 hash.h content_encoding.h share.h curl_md4.h curl_md5.h http_digest.h \
616 http_negotiate.h inet_pton.h amigaos.h strtoofft.h strerror.h \
617 inet_ntop.h curlx.h curl_memory.h curl_setup.h transfer.h select.h \
618 easyif.h multiif.h parsedate.h tftp.h sockaddr.h splay.h strdup.h \
619 socks.h ssh.h curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h \
620 slist.h nonblock.h curl_memrchr.h imap.h pop3.h smtp.h pingpong.h \
621 rtsp.h curl_threads.h warnless.h curl_hmac.h curl_rtmp.h \
622 curl_gethostname.h gopher.h http_proxy.h non-ascii.h asyn.h \
623 curl_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h \
624 curl_ntlm_msgs.h curl_sasl.h curl_multibyte.h hostcheck.h bundles.h \
625 conncache.h curl_setup_once.h multihandle.h setup-vms.h pipeline.h \
626 dotdot.h x509asn1.h http2.h sigpipe.h smb.h curl_endian.h
628 LIB_RCFILES = libcurl.rc
629 CSOURCES = $(LIB_CFILES) $(LIB_VTLS_CFILES)
630 HHEADERS = $(LIB_HFILES) $(LIB_VTLS_HFILES)
632 # libcurl has sources that provide functions named curlx_* that aren't part of
633 # the official API, but we re-use the code here to avoid duplication.
641 ../lib/curl_setup.h \
732 CURL_RCFILES = curl.rc
733 curl_SOURCES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
737 am--refresh: Makefile
739 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
741 case '$(am__configure_deps)' in \
743 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
744 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
749 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
750 $(am__cd) $(top_srcdir) && \
751 $(AUTOMAKE) --foreign Makefile
753 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
756 echo ' $(SHELL) ./config.status'; \
757 $(SHELL) ./config.status;; \
759 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
760 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
762 $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc:
764 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
765 $(SHELL) ./config.status --recheck
767 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
768 $(am__cd) $(srcdir) && $(AUTOCONF)
769 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
770 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
771 $(am__aclocal_m4_deps):
772 curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
773 cd $(top_builddir) && $(SHELL) ./config.status $@
774 libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
775 cd $(top_builddir) && $(SHELL) ./config.status $@
776 install-binSCRIPTS: $(bin_SCRIPTS)
778 @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
779 if test -n "$$list"; then \
780 echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
781 $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
783 for p in $$list; do \
784 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
785 if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
787 sed -e 'p;s,.*/,,;n' \
789 -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
790 $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
791 { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
792 if ($$2 == $$4) { files[d] = files[d] " " $$1; \
793 if (++n[d] == $(am__install_max)) { \
794 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
795 else { print "f", d "/" $$4, $$1 } } \
796 END { for (d in files) print "f", d, files[d] }' | \
797 while read type dir files; do \
798 if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
799 test -z "$$files" || { \
800 echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
801 $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
805 uninstall-binSCRIPTS:
807 @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
808 files=`for p in $$list; do echo "$$p"; done | \
809 sed -e 's,.*/,,;$(transform)'`; \
810 dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
819 -rm -f libtool config.lt
820 install-pkgconfigDATA: $(pkgconfig_DATA)
822 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
823 if test -n "$$list"; then \
824 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
825 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
827 for p in $$list; do \
828 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
830 done | $(am__base_list) | \
831 while read files; do \
832 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
833 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
836 uninstall-pkgconfigDATA:
838 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
839 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
840 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
842 # This directory's subdirectories are mostly independent; you can cd
843 # into them and run 'make' without going through this Makefile.
844 # To change the values of 'make' variables: instead of editing Makefiles,
845 # (1) if the variable is set in 'config.status', edit 'config.status'
846 # (which will cause the Makefiles to be regenerated when you run 'make');
847 # (2) otherwise, pass the desired values on the 'make' command line.
848 $(am__recursive_targets):
850 if $(am__make_keepgoing); then \
851 failcom='fail=yes'; \
856 target=`echo $@ | sed s/-recursive//`; \
858 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
859 *) list='$(SUBDIRS)' ;; \
861 for subdir in $$list; do \
862 echo "Making $$target in $$subdir"; \
863 if test "$$subdir" = "."; then \
865 local_target="$$target-am"; \
867 local_target="$$target"; \
869 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
872 if test "$$dot_seen" = "no"; then \
873 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
876 ID: $(am__tagged_files)
877 $(am__define_uniq_tagged_files); mkid -fID $$unique
881 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
884 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
885 include_option=--etags-include; \
888 include_option=--include; \
891 list='$(SUBDIRS)'; for subdir in $$list; do \
892 if test "$$subdir" = .; then :; else \
893 test ! -f $$subdir/TAGS || \
894 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
897 $(am__define_uniq_tagged_files); \
899 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
900 test -n "$$unique" || unique=$$empty_fix; \
901 if test $$# -gt 0; then \
902 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
905 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
909 ctags: ctags-recursive
912 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
913 $(am__define_uniq_tagged_files); \
914 test -z "$(CTAGS_ARGS)$$unique" \
915 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
919 here=`$(am__cd) $(top_builddir) && pwd` \
920 && $(am__cd) $(top_srcdir) \
921 && gtags -i $(GTAGS_ARGS) "$$here"
923 test ! -s cscope.files \
924 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
927 cscope.files: clean-cscope cscopelist
928 cscopelist: cscopelist-recursive
930 cscopelist-am: $(am__tagged_files)
931 list='$(am__tagged_files)'; \
932 case "$(srcdir)" in \
933 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
934 *) sdir=$(subdir)/$(srcdir) ;; \
936 for i in $$list; do \
937 if test -f "$$i"; then \
938 echo "$(subdir)/$$i"; \
942 done >> $(top_builddir)/cscope.files
945 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
946 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
948 distdir: $(DISTFILES)
949 $(am__remove_distdir)
950 test -d "$(distdir)" || mkdir "$(distdir)"
951 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
952 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
953 list='$(DISTFILES)'; \
954 dist_files=`for file in $$list; do echo $$file; done | \
955 sed -e "s|^$$srcdirstrip/||;t" \
956 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
957 case $$dist_files in \
958 */*) $(MKDIR_P) `echo "$$dist_files" | \
959 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
962 for file in $$dist_files; do \
963 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
964 if test -d $$d/$$file; then \
965 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
966 if test -d "$(distdir)/$$file"; then \
967 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
969 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
970 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
971 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
973 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
975 test -f "$(distdir)/$$file" \
976 || cp -p $$d/$$file "$(distdir)/$$file" \
980 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
981 if test "$$subdir" = .; then :; else \
983 || test -d "$(distdir)/$$subdir" \
984 || $(MKDIR_P) "$(distdir)/$$subdir" \
986 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
988 new_distdir=$$reldir; \
989 dir1=$$subdir; dir2="$(top_distdir)"; \
991 new_top_distdir=$$reldir; \
992 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
993 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
994 ($(am__cd) $$subdir && \
995 $(MAKE) $(AM_MAKEFLAGS) \
996 top_distdir="$$new_top_distdir" \
997 distdir="$$new_distdir" \
998 am__remove_distdir=: \
999 am__skip_length_check=: \
1000 am__skip_mode_fix=: \
1005 $(MAKE) $(AM_MAKEFLAGS) \
1006 top_distdir="$(top_distdir)" distdir="$(distdir)" \
1008 -test -n "$(am__skip_mode_fix)" \
1009 || find "$(distdir)" -type d ! -perm -755 \
1010 -exec chmod u+rwx,go+rx {} \; -o \
1011 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1012 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1013 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1014 || chmod -R a+r "$(distdir)"
1016 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1017 $(am__post_remove_distdir)
1020 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
1021 $(am__post_remove_distdir)
1024 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
1025 $(am__post_remove_distdir)
1028 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1029 $(am__post_remove_distdir)
1032 @echo WARNING: "Support for shar distribution archives is" \
1034 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1035 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1036 $(am__post_remove_distdir)
1039 @echo WARNING: "Support for distribution archives compressed with" \
1040 "legacy program 'compress' is deprecated." >&2
1041 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1042 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1043 $(am__post_remove_distdir)
1046 -rm -f $(distdir).zip
1047 zip -rq $(distdir).zip $(distdir)
1048 $(am__post_remove_distdir)
1051 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
1052 $(am__post_remove_distdir)
1054 # This target untars the dist file and tries a VPATH configuration. Then
1055 # it guarantees that the distribution is self-contained by making another
1058 case '$(DIST_ARCHIVES)' in \
1060 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
1062 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1064 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1066 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1068 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1070 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
1072 unzip $(distdir).zip ;;\
1074 chmod -R a-w $(distdir)
1075 chmod u+w $(distdir)
1076 mkdir $(distdir)/_build $(distdir)/_inst
1077 chmod a-w $(distdir)
1078 test -d $(distdir)/_build || exit 0; \
1079 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1080 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1082 && $(am__cd) $(distdir)/_build \
1084 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1085 $(DISTCHECK_CONFIGURE_FLAGS) \
1086 --srcdir=.. --prefix="$$dc_install_base" \
1087 && $(MAKE) $(AM_MAKEFLAGS) \
1088 && $(MAKE) $(AM_MAKEFLAGS) dvi \
1089 && $(MAKE) $(AM_MAKEFLAGS) check \
1090 && $(MAKE) $(AM_MAKEFLAGS) install \
1091 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1092 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1093 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1094 distuninstallcheck \
1095 && chmod -R a-w "$$dc_install_base" \
1097 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1098 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1099 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1100 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1101 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1102 } || { rm -rf "$$dc_destdir"; exit 1; }) \
1103 && rm -rf "$$dc_destdir" \
1104 && $(MAKE) $(AM_MAKEFLAGS) dist \
1105 && rm -rf $(DIST_ARCHIVES) \
1106 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1109 $(am__post_remove_distdir)
1110 @(echo "$(distdir) archives ready for distribution: "; \
1111 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1112 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1114 @test -n '$(distuninstallcheck_dir)' || { \
1115 echo 'ERROR: trying to run $@ with an empty' \
1116 '$$(distuninstallcheck_dir)' >&2; \
1119 $(am__cd) '$(distuninstallcheck_dir)' || { \
1120 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
1123 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1124 || { echo "ERROR: files left after uninstall:" ; \
1125 if test -n "$(DESTDIR)"; then \
1126 echo " (check DESTDIR support)"; \
1128 $(distuninstallcheck_listfiles) ; \
1130 distcleancheck: distclean
1131 @if test '$(srcdir)' = . ; then \
1132 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1135 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1136 || { echo "ERROR: files left in build directory after distclean:" ; \
1137 $(distcleancheck_listfiles) ; \
1140 check: check-recursive
1141 all-am: Makefile $(SCRIPTS) $(DATA)
1142 installdirs: installdirs-recursive
1144 for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
1145 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1147 install: install-recursive
1148 install-exec: install-exec-recursive
1149 install-data: install-data-recursive
1150 uninstall: uninstall-recursive
1153 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1155 installcheck: installcheck-recursive
1157 if test -z '$(STRIP)'; then \
1158 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1159 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1162 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1163 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1164 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1166 mostlyclean-generic:
1169 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1172 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1173 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1175 maintainer-clean-generic:
1176 @echo "This command is intended for maintainers to use"
1177 @echo "it deletes files that may require special tools to rebuild."
1178 clean: clean-recursive
1180 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
1182 distclean: distclean-recursive
1183 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1185 distclean-am: clean-am distclean-generic distclean-libtool \
1194 info: info-recursive
1198 install-data-am: install-pkgconfigDATA
1200 $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1201 install-dvi: install-dvi-recursive
1205 install-exec-am: install-binSCRIPTS
1207 install-html: install-html-recursive
1211 install-info: install-info-recursive
1217 install-pdf: install-pdf-recursive
1221 install-ps: install-ps-recursive
1227 maintainer-clean: maintainer-clean-recursive
1228 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1229 -rm -rf $(top_srcdir)/autom4te.cache
1231 maintainer-clean-am: distclean-am maintainer-clean-generic
1233 mostlyclean: mostlyclean-recursive
1235 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1243 uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
1245 $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
1246 .MAKE: $(am__recursive_targets) install-am install-data-am \
1247 install-strip uninstall-am
1249 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1250 am--refresh check check-am clean clean-cscope clean-generic \
1251 clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
1252 dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
1253 dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1254 distclean-generic distclean-libtool distclean-tags \
1255 distcleancheck distdir distuninstallcheck dvi dvi-am html \
1256 html-am info info-am install install-am install-binSCRIPTS \
1257 install-data install-data-am install-data-hook install-dvi \
1258 install-dvi-am install-exec install-exec-am install-html \
1259 install-html-am install-info install-info-am install-man \
1260 install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1261 install-ps-am install-strip installcheck installcheck-am \
1262 installdirs installdirs-am maintainer-clean \
1263 maintainer-clean-generic mostlyclean mostlyclean-generic \
1264 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
1265 uninstall-am uninstall-binSCRIPTS uninstall-hook \
1266 uninstall-pkgconfigDATA
1269 # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files
1272 rm -rf $(top_builddir)/tests/log
1273 find $(distdir) -name "*.dist" -exec rm {} \;
1274 (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
1275 for file in $$distit; do \
1276 strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
1277 cp $$file $(distdir)$$strip; \
1286 check: test examples
1288 @CROSSCOMPILING_TRUE@test-full: test
1289 @CROSSCOMPILING_TRUE@test-torture: test
1291 @CROSSCOMPILING_TRUE@test:
1292 @CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!"
1294 @CROSSCOMPILING_FALSE@test:
1295 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test)
1297 @CROSSCOMPILING_FALSE@test-full:
1298 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test)
1300 @CROSSCOMPILING_FALSE@test-torture:
1301 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test)
1303 @CROSSCOMPILING_FALSE@test-am:
1304 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test)
1307 @(cd docs/examples; $(MAKE) check)
1309 # This is a hook to have 'make clean' also clean up the docs and the tests
1310 # dir. The extra check for the Makefiles being present is necessary because
1311 # 'make distcheck' will make clean first in these directories _before_ it runs
1314 @(if test -f tests/Makefile; then cd tests; $(MAKE) clean; fi)
1315 @(if test -f docs/Makefile; then cd docs; $(MAKE) clean; fi)
1318 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
1319 # must contain the following line:
1320 # %_topdir /home/loic/local/rpm
1321 # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
1323 # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
1325 # If additional configure flags are needed to build the package, add the
1326 # following in ~/.rpmmacros
1327 # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
1328 # and run make rpm in the following way:
1329 # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
1333 $(MAKE) RPMDIST=curl rpm
1334 $(MAKE) RPMDIST=curl-ssl rpm
1337 RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
1338 cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
1339 cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
1340 rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
1341 mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
1342 mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
1345 # Build a Solaris pkgadd format file
1346 # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
1347 # file (which ends up back in this directory).
1348 # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
1349 # pkgadd -d ./HAXXcurl-*
1352 # gak - libtool requires an absoulte directory, hence the pwd below...
1355 make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
1356 cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
1357 cd $(srcdir)/packages/Solaris && $(MAKE) package
1360 # Build a cygwin binary tarball installation file
1361 # resulting .tar.bz2 file will end up at packages/Win32/cygwin
1363 $(MAKE) -C packages/Win32/cygwin cygwinbin
1365 # We extend the standard install with a custom hook:
1367 cd include && $(MAKE) install
1368 cd docs && $(MAKE) install
1370 # We extend the standard uninstall with a custom hook:
1372 cd include && $(MAKE) uninstall
1373 cd docs && $(MAKE) uninstall
1375 ca-bundle: lib/mk-ca-bundle.pl
1376 @echo "generating a fresh ca-bundle.crt"
1377 @perl $< -b -l -u lib/ca-bundle.crt
1379 ca-firefox: lib/firefox-db2pem.sh
1380 @echo "generating a fresh ca-bundle.crt"
1381 ./lib/firefox-db2pem.sh lib/ca-bundle.crt
1384 cd lib && $(MAKE) checksrc
1385 cd src && $(MAKE) checksrc
1389 vc-ide: $(VC6_LIBDSP_DEPS) $(VC6_SRCDSP_DEPS) $(VC7_LIBVCPROJ_DEPS) \
1390 $(VC7_SRCVCPROJ_DEPS) $(VC71_LIBVCPROJ_DEPS) $(VC71_SRCVCPROJ_DEPS) \
1391 $(VC8_LIBVCPROJ_DEPS) $(VC8_SRCVCPROJ_DEPS) $(VC9_LIBVCPROJ_DEPS) \
1392 $(VC9_SRCVCPROJ_DEPS) $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS) \
1393 $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS) \
1394 $(VC12_SRCVCXPROJ_DEPS)
1395 @(win32_lib_srcs='$(LIB_CFILES)'; \
1396 win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
1397 win32_lib_rc='$(LIB_RCFILES)'; \
1398 win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
1399 win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
1400 win32_src_srcs='$(CURL_CFILES)'; \
1401 win32_src_hdrs='$(CURL_HFILES)'; \
1402 win32_src_rc='$(CURL_RCFILES)'; \
1403 win32_src_x_srcs='$(CURLX_CFILES)'; \
1404 win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
1406 sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
1407 sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
1408 sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
1409 sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
1410 sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
1411 sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
1412 sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
1413 sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
1416 function gen_element(type, dir, file)\
1418 sub(/vtls\//, "", file);\
1421 if(dir == "lib\\vtls")\
1426 if(type == "dsp") {\
1427 printf("# Begin Source File\r\n");\
1429 printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
1430 printf("# End Source File\r\n");\
1432 else if(type == "vcproj1") {\
1433 printf("%s<File\r\n", tabs);\
1434 printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
1436 printf("%s</File>\r\n", tabs);\
1438 else if(type == "vcproj2") {\
1439 printf("%s<File\r\n", tabs);\
1440 printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
1442 printf("%s>\r\n", tabs);\
1443 printf("%s</File>\r\n", tabs);\
1445 else if(type == "vcxproj") {\
1446 i = index(file, ".");\
1447 ext = substr(file, i == 0 ? 0 : i + 1);\
1450 printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1451 spaces, dir, file);\
1452 else if(ext == "h")\
1453 printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1454 spaces, dir, file);\
1455 else if(ext == "rc")\
1456 printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1457 spaces, dir, file);\
1463 if($$0 == "CURL_LIB_C_FILES") {\
1464 split(lib_srcs, arr);\
1465 for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1467 else if($$0 == "CURL_LIB_H_FILES") {\
1468 split(lib_hdrs, arr);\
1469 for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1471 else if($$0 == "CURL_LIB_RC_FILES") {\
1472 split(lib_rc, arr);\
1473 for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1475 else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
1476 split(lib_vtls_srcs, arr);\
1477 for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1479 else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
1480 split(lib_vtls_hdrs, arr);\
1481 for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1483 else if($$0 == "CURL_SRC_C_FILES") {\
1484 split(src_srcs, arr);\
1485 for(val in arr) gen_element(proj_type, "src", arr[val]);\
1487 else if($$0 == "CURL_SRC_H_FILES") {\
1488 split(src_hdrs, arr);\
1489 for(val in arr) gen_element(proj_type, "src", arr[val]);\
1491 else if($$0 == "CURL_SRC_RC_FILES") {\
1492 split(src_rc, arr);\
1493 for(val in arr) gen_element(proj_type, "src", arr[val]);\
1495 else if($$0 == "CURL_SRC_X_C_FILES") {\
1496 split(src_x_srcs, arr);\
1498 sub(/..\/lib\//, "", arr[val]);\
1499 gen_element(proj_type, "lib", arr[val]);\
1502 else if($$0 == "CURL_SRC_X_H_FILES") {\
1503 split(src_x_hdrs, arr);\
1505 sub(/..\/lib\//, "", arr[val]);\
1506 gen_element(proj_type, "lib", arr[val]);\
1510 printf("%s\r\n", $$0);\
1513 echo "generating '$(VC6_LIBDSP)'"; \
1514 awk -v proj_type=dsp \
1515 -v lib_srcs="$$sorted_lib_srcs" \
1516 -v lib_hdrs="$$sorted_lib_hdrs" \
1517 -v lib_rc="$$win32_lib_rc" \
1518 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1519 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1520 "$$awk_code" $(srcdir)/$(VC6_LIBTMPL) > $(VC6_LIBDSP) || { exit 1; }; \
1522 echo "generating '$(VC6_SRCDSP)'"; \
1523 awk -v proj_type=dsp \
1524 -v src_srcs="$$sorted_src_srcs" \
1525 -v src_hdrs="$$sorted_src_hdrs" \
1526 -v src_rc="$$win32_src_rc" \
1527 -v src_x_srcs="$$sorted_src_x_srcs" \
1528 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1529 "$$awk_code" $(srcdir)/$(VC6_SRCTMPL) > $(VC6_SRCDSP) || { exit 1; }; \
1531 echo "generating '$(VC7_LIBVCPROJ)'"; \
1532 awk -v proj_type=vcproj1 \
1533 -v lib_srcs="$$sorted_lib_srcs" \
1534 -v lib_hdrs="$$sorted_lib_hdrs" \
1535 -v lib_rc="$$win32_lib_rc" \
1536 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1537 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1538 "$$awk_code" $(srcdir)/$(VC7_LIBTMPL) > $(VC7_LIBVCPROJ) || { exit 1; }; \
1540 echo "generating '$(VC7_SRCVCPROJ)'"; \
1541 awk -v proj_type=vcproj1 \
1542 -v src_srcs="$$sorted_src_srcs" \
1543 -v src_hdrs="$$sorted_src_hdrs" \
1544 -v src_rc="$$win32_src_rc" \
1545 -v src_x_srcs="$$sorted_src_x_srcs" \
1546 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1547 "$$awk_code" $(srcdir)/$(VC7_SRCTMPL) > $(VC7_SRCVCPROJ) || { exit 1; }; \
1549 echo "generating '$(VC71_LIBVCPROJ)'"; \
1550 awk -v proj_type=vcproj1 \
1551 -v lib_srcs="$$sorted_lib_srcs" \
1552 -v lib_hdrs="$$sorted_lib_hdrs" \
1553 -v lib_rc="$$win32_lib_rc" \
1554 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1555 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1556 "$$awk_code" $(srcdir)/$(VC71_LIBTMPL) > $(VC71_LIBVCPROJ) || { exit 1; }; \
1558 echo "generating '$(VC71_SRCVCPROJ)'"; \
1559 awk -v proj_type=vcproj1 \
1560 -v src_srcs="$$sorted_src_srcs" \
1561 -v src_hdrs="$$sorted_src_hdrs" \
1562 -v src_rc="$$win32_src_rc" \
1563 -v src_x_srcs="$$sorted_src_x_srcs" \
1564 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1565 "$$awk_code" $(srcdir)/$(VC71_SRCTMPL) > $(VC71_SRCVCPROJ) || { exit 1; }; \
1567 echo "generating '$(VC8_LIBVCPROJ)'"; \
1568 awk -v proj_type=vcproj2 \
1569 -v lib_srcs="$$sorted_lib_srcs" \
1570 -v lib_hdrs="$$sorted_lib_hdrs" \
1571 -v lib_rc="$$win32_lib_rc" \
1572 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1573 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1574 "$$awk_code" $(srcdir)/$(VC8_LIBTMPL) > $(VC8_LIBVCPROJ) || { exit 1; }; \
1576 echo "generating '$(VC8_SRCVCPROJ)'"; \
1577 awk -v proj_type=vcproj2 \
1578 -v src_srcs="$$sorted_src_srcs" \
1579 -v src_hdrs="$$sorted_src_hdrs" \
1580 -v src_rc="$$win32_src_rc" \
1581 -v src_x_srcs="$$sorted_src_x_srcs" \
1582 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1583 "$$awk_code" $(srcdir)/$(VC8_SRCTMPL) > $(VC8_SRCVCPROJ) || { exit 1; }; \
1585 echo "generating '$(VC9_LIBVCPROJ)'"; \
1586 awk -v proj_type=vcproj2 \
1587 -v lib_srcs="$$sorted_lib_srcs" \
1588 -v lib_hdrs="$$sorted_lib_hdrs" \
1589 -v lib_rc="$$win32_lib_rc" \
1590 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1591 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1592 "$$awk_code" $(srcdir)/$(VC9_LIBTMPL) > $(VC9_LIBVCPROJ) || { exit 1; }; \
1594 echo "generating '$(VC9_SRCVCPROJ)'"; \
1595 awk -v proj_type=vcproj2 \
1596 -v src_srcs="$$sorted_src_srcs" \
1597 -v src_hdrs="$$sorted_src_hdrs" \
1598 -v src_rc="$$win32_src_rc" \
1599 -v src_x_srcs="$$sorted_src_x_srcs" \
1600 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1601 "$$awk_code" $(srcdir)/$(VC9_SRCTMPL) > $(VC9_SRCVCPROJ) || { exit 1; }; \
1603 echo "generating '$(VC10_LIBVCXPROJ)'"; \
1604 awk -v proj_type=vcxproj \
1605 -v lib_srcs="$$sorted_lib_srcs" \
1606 -v lib_hdrs="$$sorted_lib_hdrs" \
1607 -v lib_rc="$$win32_lib_rc" \
1608 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1609 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1610 "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \
1612 echo "generating '$(VC10_SRCVCXPROJ)'"; \
1613 awk -v proj_type=vcxproj \
1614 -v src_srcs="$$sorted_src_srcs" \
1615 -v src_hdrs="$$sorted_src_hdrs" \
1616 -v src_rc="$$win32_src_rc" \
1617 -v src_x_srcs="$$sorted_src_x_srcs" \
1618 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1619 "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \
1621 echo "generating '$(VC11_LIBVCXPROJ)'"; \
1622 awk -v proj_type=vcxproj \
1623 -v lib_srcs="$$sorted_lib_srcs" \
1624 -v lib_hdrs="$$sorted_lib_hdrs" \
1625 -v lib_rc="$$win32_lib_rc" \
1626 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1627 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1628 "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \
1630 echo "generating '$(VC11_SRCVCXPROJ)'"; \
1631 awk -v proj_type=vcxproj \
1632 -v src_srcs="$$sorted_src_srcs" \
1633 -v src_hdrs="$$sorted_src_hdrs" \
1634 -v src_rc="$$win32_src_rc" \
1635 -v src_x_srcs="$$sorted_src_x_srcs" \
1636 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1637 "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \
1639 echo "generating '$(VC12_LIBVCXPROJ)'"; \
1640 awk -v proj_type=vcxproj \
1641 -v lib_srcs="$$sorted_lib_srcs" \
1642 -v lib_hdrs="$$sorted_lib_hdrs" \
1643 -v lib_rc="$$win32_lib_rc" \
1644 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1645 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1646 "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \
1648 echo "generating '$(VC12_SRCVCXPROJ)'"; \
1649 awk -v proj_type=vcxproj \
1650 -v src_srcs="$$sorted_src_srcs" \
1651 -v src_hdrs="$$sorted_src_hdrs" \
1652 -v src_rc="$$win32_src_rc" \
1653 -v src_x_srcs="$$sorted_src_x_srcs" \
1654 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1655 "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; };)
1657 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1658 # Otherwise a system limit (for SysV at least) may be exceeded.