Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 #***************************************************************************
  18 #                                  _   _ ____  _
  19 #  Project                     ___| | | |  _ \| |
  20 #                             / __| | | | |_) | |
  21 #                            | (__| |_| |  _ <| |___
  22 #                             \___|\___/|_| \_\_____|
  23 #
  24 # Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
  25 #
  26 # This software is licensed as described in the file COPYING, which
  27 # you should have received as part of this distribution. The terms
  28 # are also available at https://curl.haxx.se/docs/copyright.html.
  29 #
  30 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
  31 # copies of the Software, and permit persons to whom the Software is
  32 # furnished to do so, under the terms of the COPYING file.
  33 #
  34 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  35 # KIND, either express or implied.
  36 #
  37 ###########################################################################
  38
  39 #***************************************************************************
  40 #                                  _   _ ____  _
  41 #  Project                     ___| | | |  _ \| |
  42 #                             / __| | | | |_) | |
  43 #                            | (__| |_| |  _ <| |___
  44 #                             \___|\___/|_| \_\_____|
  45 #
  46 # Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
  47 #
  48 # This software is licensed as described in the file COPYING, which
  49 # you should have received as part of this distribution. The terms
  50 # are also available at https://curl.haxx.se/docs/copyright.html.
  51 #
  52 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
  53 # copies of the Software, and permit persons to whom the Software is
  54 # furnished to do so, under the terms of the COPYING file.
  55 #
  56 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  57 # KIND, either express or implied.
  58 #
  59 ###########################################################################
  60
  61 # ./src/Makefile.inc
  62 # Using the backslash as line continuation character might be problematic
  63 # with some make flavours, as Watcom's wmake showed us already. If we
  64 # ever want to change this in a portable manner then we should consider
  65 # this idea (posted to the libcurl list by Adam Kellas):
  66 # CSRC1 = file1.c file2.c file3.c
  67 # CSRC2 = file4.c file5.c file6.c
  68 # CSOURCES = $(CSRC1) $(CSRC2)
  69
  70
  71 VPATH = @srcdir@
  72 am__is_gnu_make = { \
  73   if test -z '$(MAKELEVEL)'; then \
  74     false; \
  75   elif test -n '$(MAKE_HOST)'; then \
  76     true; \
  77   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  78     true; \
  79   else \
  80     false; \
  81   fi; \
  82 }
  83 am__make_running_with_option = \
  84   case $${target_option-} in \
  85       ?) ;; \
  86       *) echo "am__make_running_with_option: internal error: invalid" \
  87               "target option '$${target_option-}' specified" >&2; \
  88          exit 1;; \
  89   esac; \
  90   has_opt=no; \
  91   sane_makeflags=$$MAKEFLAGS; \
  92   if $(am__is_gnu_make); then \
  93     sane_makeflags=$$MFLAGS; \
  94   else \
  95     case $$MAKEFLAGS in \
  96       *\\[\ \   ]*) \
  97         bs=\\; \
  98         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  99           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
 100     esac; \
 101   fi; \
 102   skip_next=no; \
 103   strip_trailopt () \
 104   { \
 105     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
 106   }; \
 107   for flg in $$sane_makeflags; do \
 108     test $$skip_next = yes && { skip_next=no; continue; }; \
 109     case $$flg in \
 110       *=*|--*) continue;; \
 111         -*I) strip_trailopt 'I'; skip_next=yes;; \
 112       -*I?*) strip_trailopt 'I';; \
 113         -*O) strip_trailopt 'O'; skip_next=yes;; \
 114       -*O?*) strip_trailopt 'O';; \
 115         -*l) strip_trailopt 'l'; skip_next=yes;; \
 116       -*l?*) strip_trailopt 'l';; \
 117       -[dEDm]) skip_next=yes;; \
 118       -[JT]) skip_next=yes;; \
 119     esac; \
 120     case $$flg in \
 121       *$$target_option*) has_opt=yes; break;; \
 122     esac; \
 123   done; \
 124   test $$has_opt = yes
 125 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
 126 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 127 pkgdatadir = $(datadir)/@PACKAGE@
 128 pkgincludedir = $(includedir)/@PACKAGE@
 129 pkglibdir = $(libdir)/@PACKAGE@
 130 pkglibexecdir = $(libexecdir)/@PACKAGE@
 131 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 132 install_sh_DATA = $(install_sh) -c -m 644
 133 install_sh_PROGRAM = $(install_sh) -c
 134 install_sh_SCRIPT = $(install_sh) -c
 135 INSTALL_HEADER = $(INSTALL_DATA)
 136 transform = $(program_transform_name)
 137 NORMAL_INSTALL = :
 138 PRE_INSTALL = :
 139 POST_INSTALL = :
 140 NORMAL_UNINSTALL = :
 141 PRE_UNINSTALL = :
 142 POST_UNINSTALL = :
 143 build_triplet = @build@
 144 host_triplet = @host@
 145 subdir = .
 146 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 147 am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \
 148         $(top_srcdir)/m4/curl-confopts.m4 \
 149         $(top_srcdir)/m4/curl-functions.m4 \
 150         $(top_srcdir)/m4/curl-openssl.m4 \
 151         $(top_srcdir)/m4/curl-override.m4 \
 152         $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
 153         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 154         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 155         $(top_srcdir)/m4/xc-am-iface.m4 \
 156         $(top_srcdir)/m4/xc-cc-check.m4 \
 157         $(top_srcdir)/m4/xc-lt-iface.m4 \
 158         $(top_srcdir)/m4/xc-translit.m4 \
 159         $(top_srcdir)/m4/xc-val-flgs.m4 \
 160         $(top_srcdir)/m4/zz40-xc-ovr.m4 \
 161         $(top_srcdir)/m4/zz50-xc-ovr.m4 \
 162         $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
 163         $(top_srcdir)/configure.ac
 164 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 165         $(ACLOCAL_M4)
 166 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 167         $(am__configure_deps) $(am__DIST_COMMON)
 168 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 169  configure.lineno config.status.lineno
 170 mkinstalldirs = $(install_sh) -d
 171 CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
 172         $(top_builddir)/include/curl/curlbuild.h
 173 CONFIG_CLEAN_FILES = curl-config libcurl.pc
 174 CONFIG_CLEAN_VPATH_FILES =
 175 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 176 am__vpath_adj = case $$p in \
 177     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 178     *) f=$$p;; \
 179   esac;
 180 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 181 am__install_max = 40
 182 am__nobase_strip_setup = \
 183   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 184 am__nobase_strip = \
 185   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 186 am__nobase_list = $(am__nobase_strip_setup); \
 187   for p in $$list; do echo "$$p $$p"; done | \
 188   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 189   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 190     if (++n[$$2] == $(am__install_max)) \
 191       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 192     END { for (dir in files) print dir, files[dir] }'
 193 am__base_list = \
 194   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 195   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 196 am__uninstall_files_from_dir = { \
 197   test -z "$$files" \
 198     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 199     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 200          $(am__cd) "$$dir" && rm -f $$files; }; \
 201   }
 202 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
 203 SCRIPTS = $(bin_SCRIPTS)
 204 AM_V_P = $(am__v_P_@AM_V@)
 205 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 206 am__v_P_0 = false
 207 am__v_P_1 = :
 208 AM_V_GEN = $(am__v_GEN_@AM_V@)
 209 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 210 am__v_GEN_0 = @echo "  GEN     " $@;
 211 am__v_GEN_1 =
 212 AM_V_at = $(am__v_at_@AM_V@)
 213 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 214 am__v_at_0 = @
 215 am__v_at_1 =
 216 SOURCES =
 217 DIST_SOURCES =
 218 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 219         ctags-recursive dvi-recursive html-recursive info-recursive \
 220         install-data-recursive install-dvi-recursive \
 221         install-exec-recursive install-html-recursive \
 222         install-info-recursive install-pdf-recursive \
 223         install-ps-recursive install-recursive installcheck-recursive \
 224         installdirs-recursive pdf-recursive ps-recursive \
 225         tags-recursive uninstall-recursive
 226 am__can_run_installinfo = \
 227   case $$AM_UPDATE_INFO_DIR in \
 228     n|no|NO) false;; \
 229     *) (install-info --version) >/dev/null 2>&1;; \
 230   esac
 231 DATA = $(pkgconfig_DATA)
 232 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 233   distclean-recursive maintainer-clean-recursive
 234 am__recursive_targets = \
 235   $(RECURSIVE_TARGETS) \
 236   $(RECURSIVE_CLEAN_TARGETS) \
 237   $(am__extra_recursive_targets)
 238 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 239         cscope distdir dist dist-all distcheck
 240 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 241 # Read a list of newline-separated strings from the standard input,
 242 # and print each of them once, without duplicates.  Input order is
 243 # *not* preserved.
 244 am__uniquify_input = $(AWK) '\
 245   BEGIN { nonempty = 0; } \
 246   { items[$$0] = 1; nonempty = 1; } \
 247   END { if (nonempty) { for (i in items) print i; }; } \
 248 '
 249 # Make sure the list of sources is unique.  This is necessary because,
 250 # e.g., the same source file might be shared among _SOURCES variables
 251 # for different programs/libraries.
 252 am__define_uniq_tagged_files = \
 253   list='$(am__tagged_files)'; \
 254   unique=`for i in $$list; do \
 255     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 256   done | $(am__uniquify_input)`
 257 ETAGS = etags
 258 CTAGS = ctags
 259 CSCOPE = cscope
 260 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \
 261         $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \
 262         $(srcdir)/src/Makefile.inc COPYING README compile config.guess \
 263         config.sub depcomp install-sh ltmain.sh missing
 264 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 265 distdir = $(PACKAGE)-$(VERSION)
 266 top_distdir = $(distdir)
 267 am__remove_distdir = \
 268   if test -d "$(distdir)"; then \
 269     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 270       && rm -rf "$(distdir)" \
 271       || { sleep 5 && rm -rf "$(distdir)"; }; \
 272   else :; fi
 273 am__post_remove_distdir = $(am__remove_distdir)
 274 am__relativize = \
 275   dir0=`pwd`; \
 276   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 277   sed_rest='s,^[^/]*/*,,'; \
 278   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 279   sed_butlast='s,/*[^/]*$$,,'; \
 280   while test -n "$$dir1"; do \
 281     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 282     if test "$$first" != "."; then \
 283       if test "$$first" = ".."; then \
 284         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 285         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 286       else \
 287         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 288         if test "$$first2" = "$$first"; then \
 289           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 290         else \
 291           dir2="../$$dir2"; \
 292         fi; \
 293         dir0="$$dir0"/"$$first"; \
 294       fi; \
 295     fi; \
 296     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 297   done; \
 298   reldir="$$dir2"
 299 DIST_ARCHIVES = $(distdir).tar.gz
 300 GZIP_ENV = --best
 301 DIST_TARGETS = dist-gzip
 302 distuninstallcheck_listfiles = find . -type f -print
 303 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 304   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 305 distcleancheck_listfiles = find . -type f -print
 306 ACLOCAL = @ACLOCAL@
 307 AMTAR = @AMTAR@
 308 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 309 AR = @AR@
 310 AS = @AS@
 311 AUTOCONF = @AUTOCONF@
 312 AUTOHEADER = @AUTOHEADER@
 313 AUTOMAKE = @AUTOMAKE@
 314 AWK = @AWK@
 315 BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
 316 CC = @CC@
 317 CCDEPMODE = @CCDEPMODE@
 318 CFLAGS = @CFLAGS@
 319 CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
 320 CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
 321 CPP = @CPP@
 322 CPPFLAGS = @CPPFLAGS@
 323 CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
 324 CURLVERSION = @CURLVERSION@
 325 CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
 326 CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
 327 CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
 328 CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
 329 CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
 330 CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
 331 CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
 332 CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
 333 CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
 334 CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
 335 CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
 336 CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
 337 CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
 338 CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
 339 CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
 340 CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
 341 CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
 342 CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
 343 CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
 344 CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
 345 CYGPATH_W = @CYGPATH_W@
 346 DEFS = @DEFS@
 347 DEPDIR = @DEPDIR@
 348 DLLTOOL = @DLLTOOL@
 349 DSYMUTIL = @DSYMUTIL@
 350 DUMPBIN = @DUMPBIN@
 351 ECHO_C = @ECHO_C@
 352 ECHO_N = @ECHO_N@
 353 ECHO_T = @ECHO_T@
 354 EGREP = @EGREP@
 355 ENABLE_SHARED = @ENABLE_SHARED@
 356 ENABLE_STATIC = @ENABLE_STATIC@
 357 EXEEXT = @EXEEXT@
 358 FGREP = @FGREP@
 359 GREP = @GREP@
 360 HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
 361 HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
 362 HAVE_LIBZ = @HAVE_LIBZ@
 363 HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
 364 IDN_ENABLED = @IDN_ENABLED@
 365 INSTALL = @INSTALL@
 366 INSTALL_DATA = @INSTALL_DATA@
 367 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 368 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 369 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 370 IPV6_ENABLED = @IPV6_ENABLED@
 371 LD = @LD@
 372 LDFLAGS = @LDFLAGS@
 373 LIBCURL_LIBS = @LIBCURL_LIBS@
 374 LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
 375 LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
 376 LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
 377 LIBOBJS = @LIBOBJS@
 378 LIBS = @LIBS@
 379 LIBTOOL = @LIBTOOL@
 380 LIPO = @LIPO@
 381 LN_S = @LN_S@
 382 LTLIBOBJS = @LTLIBOBJS@
 383 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 384 MAINT = @MAINT@
 385 MAKEINFO = @MAKEINFO@
 386 MANIFEST_TOOL = @MANIFEST_TOOL@
 387 MANOPT = @MANOPT@
 388 MKDIR_P = @MKDIR_P@
 389 NM = @NM@
 390 NMEDIT = @NMEDIT@
 391 NROFF = @NROFF@
 392 NSS_LIBS = @NSS_LIBS@
 393 OBJDUMP = @OBJDUMP@
 394 OBJEXT = @OBJEXT@
 395 OTOOL = @OTOOL@
 396 OTOOL64 = @OTOOL64@
 397 PACKAGE = @PACKAGE@
 398 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 399 PACKAGE_NAME = @PACKAGE_NAME@
 400 PACKAGE_STRING = @PACKAGE_STRING@
 401 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 402 PACKAGE_URL = @PACKAGE_URL@
 403 PACKAGE_VERSION = @PACKAGE_VERSION@
 404 PATH_SEPARATOR = @PATH_SEPARATOR@
 405 PERL = @PERL@
 406 PKGADD_NAME = @PKGADD_NAME@
 407 PKGADD_PKG = @PKGADD_PKG@
 408 PKGADD_VENDOR = @PKGADD_VENDOR@
 409 PKGCONFIG = @PKGCONFIG@
 410 RANDOM_FILE = @RANDOM_FILE@
 411 RANLIB = @RANLIB@
 412 REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
 413 SED = @SED@
 414 SET_MAKE = @SET_MAKE@
 415 SHELL = @SHELL@
 416 SSL_ENABLED = @SSL_ENABLED@
 417 SSL_LIBS = @SSL_LIBS@
 418 STRIP = @STRIP@
 419 SUPPORT_FEATURES = @SUPPORT_FEATURES@
 420 SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
 421 USE_ARES = @USE_ARES@
 422 USE_AXTLS = @USE_AXTLS@
 423 USE_CYASSL = @USE_CYASSL@
 424 USE_DARWINSSL = @USE_DARWINSSL@
 425 USE_GNUTLS = @USE_GNUTLS@
 426 USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
 427 USE_LIBRTMP = @USE_LIBRTMP@
 428 USE_LIBSSH2 = @USE_LIBSSH2@
 429 USE_MBEDTLS = @USE_MBEDTLS@
 430 USE_NGHTTP2 = @USE_NGHTTP2@
 431 USE_NSS = @USE_NSS@
 432 USE_OPENLDAP = @USE_OPENLDAP@
 433 USE_POLARSSL = @USE_POLARSSL@
 434 USE_SCHANNEL = @USE_SCHANNEL@
 435 USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
 436 USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
 437 VERSION = @VERSION@
 438 VERSIONNUM = @VERSIONNUM@
 439 ZLIB_LIBS = @ZLIB_LIBS@
 440 ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
 441 abs_builddir = @abs_builddir@
 442 abs_srcdir = @abs_srcdir@
 443 abs_top_builddir = @abs_top_builddir@
 444 abs_top_srcdir = @abs_top_srcdir@
 445 ac_ct_AR = @ac_ct_AR@
 446 ac_ct_CC = @ac_ct_CC@
 447 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 448 am__include = @am__include@
 449 am__leading_dot = @am__leading_dot@
 450 am__quote = @am__quote@
 451 am__tar = @am__tar@
 452 am__untar = @am__untar@
 453 bindir = @bindir@
 454 build = @build@
 455 build_alias = @build_alias@
 456 build_cpu = @build_cpu@
 457 build_os = @build_os@
 458 build_vendor = @build_vendor@
 459 builddir = @builddir@
 460 datadir = @datadir@
 461 datarootdir = @datarootdir@
 462 docdir = @docdir@
 463 dvidir = @dvidir@
 464 exec_prefix = @exec_prefix@
 465 host = @host@
 466 host_alias = @host_alias@
 467 host_cpu = @host_cpu@
 468 host_os = @host_os@
 469 host_vendor = @host_vendor@
 470 htmldir = @htmldir@
 471 includedir = @includedir@
 472 infodir = @infodir@
 473 install_sh = @install_sh@
 474 libdir = @libdir@
 475 libexecdir = @libexecdir@
 476 libext = @libext@
 477 localedir = @localedir@
 478 localstatedir = @localstatedir@
 479 mandir = @mandir@
 480 mkdir_p = @mkdir_p@
 481 oldincludedir = @oldincludedir@
 482 pdfdir = @pdfdir@
 483 prefix = @prefix@
 484 program_transform_name = @program_transform_name@
 485 psdir = @psdir@
 486 runstatedir = @runstatedir@
 487 sbindir = @sbindir@
 488 sharedstatedir = @sharedstatedir@
 489 srcdir = @srcdir@
 490 subdirs = @subdirs@
 491 sysconfdir = @sysconfdir@
 492 target_alias = @target_alias@
 493 top_build_prefix = @top_build_prefix@
 494 top_builddir = @top_builddir@
 495 top_srcdir = @top_srcdir@
 496 AUTOMAKE_OPTIONS = foreign
 497 ACLOCAL_AMFLAGS = -I m4
 498 CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in      \
 499  CMake/CurlTests.c CMake/FindGSS.cmake CMake/OtherTests.cmake   \
 500  CMake/Platforms/WindowsCache.cmake CMake/Utilities.cmake       \
 501  include/curl/curlbuild.h.cmake CMake/Macros.cmake
 502
 503 VC6_LIBTMPL = projects/Windows/VC6/lib/libcurl.tmpl
 504 VC6_LIBDSP = projects/Windows/VC6/lib/libcurl.dsp.dist
 505 VC6_LIBDSP_DEPS = $(VC6_LIBTMPL) Makefile.am lib/Makefile.inc
 506 VC6_SRCTMPL = projects/Windows/VC6/src/curl.tmpl
 507 VC6_SRCDSP = projects/Windows/VC6/src/curl.dsp.dist
 508 VC6_SRCDSP_DEPS = $(VC6_SRCTMPL) Makefile.am src/Makefile.inc
 509 VC7_LIBTMPL = projects/Windows/VC7/lib/libcurl.tmpl
 510 VC7_LIBVCPROJ = projects/Windows/VC7/lib/libcurl.vcproj.dist
 511 VC7_LIBVCPROJ_DEPS = $(VC7_LIBTMPL) Makefile.am lib/Makefile.inc
 512 VC7_SRCTMPL = projects/Windows/VC7/src/curl.tmpl
 513 VC7_SRCVCPROJ = projects/Windows/VC7/src/curl.vcproj.dist
 514 VC7_SRCVCPROJ_DEPS = $(VC7_SRCTMPL) Makefile.am src/Makefile.inc
 515 VC71_LIBTMPL = projects/Windows/VC7.1/lib/libcurl.tmpl
 516 VC71_LIBVCPROJ = projects/Windows/VC7.1/lib/libcurl.vcproj.dist
 517 VC71_LIBVCPROJ_DEPS = $(VC71_LIBTMPL) Makefile.am lib/Makefile.inc
 518 VC71_SRCTMPL = projects/Windows/VC7.1/src/curl.tmpl
 519 VC71_SRCVCPROJ = projects/Windows/VC7.1/src/curl.vcproj.dist
 520 VC71_SRCVCPROJ_DEPS = $(VC71_SRCTMPL) Makefile.am src/Makefile.inc
 521 VC8_LIBTMPL = projects/Windows/VC8/lib/libcurl.tmpl
 522 VC8_LIBVCPROJ = projects/Windows/VC8/lib/libcurl.vcproj.dist
 523 VC8_LIBVCPROJ_DEPS = $(VC8_LIBTMPL) Makefile.am lib/Makefile.inc
 524 VC8_SRCTMPL = projects/Windows/VC8/src/curl.tmpl
 525 VC8_SRCVCPROJ = projects/Windows/VC8/src/curl.vcproj.dist
 526 VC8_SRCVCPROJ_DEPS = $(VC8_SRCTMPL) Makefile.am src/Makefile.inc
 527 VC9_LIBTMPL = projects/Windows/VC9/lib/libcurl.tmpl
 528 VC9_LIBVCPROJ = projects/Windows/VC9/lib/libcurl.vcproj.dist
 529 VC9_LIBVCPROJ_DEPS = $(VC9_LIBTMPL) Makefile.am lib/Makefile.inc
 530 VC9_SRCTMPL = projects/Windows/VC9/src/curl.tmpl
 531 VC9_SRCVCPROJ = projects/Windows/VC9/src/curl.vcproj.dist
 532 VC9_SRCVCPROJ_DEPS = $(VC9_SRCTMPL) Makefile.am src/Makefile.inc
 533 VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl
 534 VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist
 535 VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc
 536 VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl
 537 VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist
 538 VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc
 539 VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl
 540 VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist
 541 VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc
 542 VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl
 543 VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist
 544 VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc
 545 VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl
 546 VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist
 547 VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc
 548 VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl
 549 VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist
 550 VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc
 551 VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl
 552 VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist
 553 VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc
 554 VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl
 555 VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist
 556 VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc
 557 VC_DIST = projects/README                           \
 558  projects/build-openssl.bat                         \
 559  projects/build-wolfssl.bat                         \
 560  projects/checksrc.bat                              \
 561  projects/Windows/VC6/curl-all.dsw                  \
 562  projects/Windows/VC6/lib/libcurl.dsw               \
 563  projects/Windows/VC6/src/curl.dsw                  \
 564  projects/Windows/VC7/curl-all.sln                  \
 565  projects/Windows/VC7/lib/libcurl.sln               \
 566  projects/Windows/VC7/src/curl.sln                  \
 567  projects/Windows/VC7.1/curl-all.sln                \
 568  projects/Windows/VC7.1/lib/libcurl.sln             \
 569  projects/Windows/VC7.1/src/curl.sln                \
 570  projects/Windows/VC8/curl-all.sln                  \
 571  projects/Windows/VC8/lib/libcurl.sln               \
 572  projects/Windows/VC8/src/curl.sln                  \
 573  projects/Windows/VC9/curl-all.sln                  \
 574  projects/Windows/VC9/lib/libcurl.sln               \
 575  projects/Windows/VC9/src/curl.sln                  \
 576  projects/Windows/VC10/curl-all.sln                 \
 577  projects/Windows/VC10/lib/libcurl.sln              \
 578  projects/Windows/VC10/lib/libcurl.vcxproj.filters  \
 579  projects/Windows/VC10/src/curl.sln                 \
 580  projects/Windows/VC10/src/curl.vcxproj.filters     \
 581  projects/Windows/VC11/curl-all.sln                 \
 582  projects/Windows/VC11/lib/libcurl.sln              \
 583  projects/Windows/VC11/lib/libcurl.vcxproj.filters  \
 584  projects/Windows/VC11/src/curl.sln                 \
 585  projects/Windows/VC11/src/curl.vcxproj.filters     \
 586  projects/Windows/VC12/curl-all.sln                 \
 587  projects/Windows/VC12/lib/libcurl.sln              \
 588  projects/Windows/VC12/lib/libcurl.vcxproj.filters  \
 589  projects/Windows/VC12/src/curl.sln                 \
 590  projects/Windows/VC12/src/curl.vcxproj.filters     \
 591  projects/Windows/VC14/curl-all.sln                 \
 592  projects/Windows/VC14/lib/libcurl.sln              \
 593  projects/Windows/VC14/lib/libcurl.vcxproj.filters  \
 594  projects/Windows/VC14/src/curl.sln                 \
 595  projects/Windows/VC14/src/curl.vcxproj.filters
 596
 597 WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat   \
 598  winbuild/MakefileBuild.vc winbuild/Makefile.vc                         \
 599  winbuild/Makefile.msvc.names
 600
 601 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in       \
 602  RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework scripts/zsh.pl  \
 603  $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST) lib/libcurl.vers.in          \
 604  buildconf.bat
 605
 606 CLEANFILES = $(VC6_LIBDSP) $(VC6_SRCDSP) $(VC7_LIBVCPROJ) $(VC7_SRCVCPROJ)      \
 607  $(VC71_LIBVCPROJ) $(VC71_SRCVCPROJ) $(VC8_LIBVCPROJ) $(VC8_SRCVCPROJ)  \
 608  $(VC9_LIBVCPROJ) $(VC9_SRCVCPROJ) $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ)        \
 609  $(VC11_LIBVCXPROJ) $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ)    \
 610  $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ)
 611
 612 bin_SCRIPTS = curl-config
 613 SUBDIRS = lib src include scripts
 614 DIST_SUBDIRS = $(SUBDIRS) tests packages docs
 615 pkgconfigdir = $(libdir)/pkgconfig
 616 pkgconfig_DATA = libcurl.pc
 617 LIB_VTLS_CFILES = vtls/openssl.c vtls/gtls.c vtls/vtls.c vtls/nss.c     \
 618   vtls/polarssl.c vtls/polarssl_threadlock.c vtls/axtls.c               \
 619   vtls/cyassl.c vtls/schannel.c vtls/darwinssl.c vtls/gskit.c           \
 620   vtls/mbedtls.c
 621
 622 LIB_VTLS_HFILES = vtls/openssl.h vtls/vtls.h vtls/gtls.h                \
 623   vtls/nssg.h vtls/polarssl.h vtls/polarssl_threadlock.h vtls/axtls.h   \
 624   vtls/cyassl.h vtls/schannel.h vtls/darwinssl.h vtls/gskit.h           \
 625   vtls/mbedtls.h
 626
 627 LIB_CFILES = file.c timeval.c base64.c hostip.c progress.c formdata.c   \
 628   cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c       \
 629   ldap.c version.c getenv.c escape.c mprintf.c telnet.c netrc.c         \
 630   getinfo.c transfer.c strequal.c easy.c security.c curl_fnmatch.c      \
 631   fileinfo.c ftplistparser.c wildcard.c krb5.c memdebug.c http_chunks.c \
 632   strtok.c connect.c llist.c hash.c multi.c content_encoding.c share.c  \
 633   http_digest.c md4.c md5.c http_negotiate.c inet_pton.c strtoofft.c    \
 634   strerror.c amigaos.c hostasyn.c hostip4.c hostip6.c hostsyn.c         \
 635   inet_ntop.c parsedate.c select.c tftp.c splay.c strdup.c socks.c      \
 636   ssh.c rawstr.c curl_addrinfo.c socks_gssapi.c socks_sspi.c            \
 637   curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c    \
 638   pingpong.c rtsp.c curl_threads.c warnless.c hmac.c curl_rtmp.c        \
 639   openldap.c curl_gethostname.c gopher.c idn_win32.c                    \
 640   http_negotiate_sspi.c http_proxy.c non-ascii.c asyn-ares.c            \
 641   asyn-thread.c curl_gssapi.c curl_ntlm.c curl_ntlm_wb.c                \
 642   curl_ntlm_core.c curl_ntlm_msgs.c curl_sasl.c curl_multibyte.c        \
 643   hostcheck.c conncache.c pipeline.c dotdot.c x509asn1.c                \
 644   http2.c curl_sasl_sspi.c smb.c curl_sasl_gssapi.c curl_endian.c       \
 645   curl_des.c
 646
 647 LIB_HFILES = arpa_telnet.h netrc.h file.h timeval.h hostip.h progress.h \
 648   formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h if2ip.h         \
 649   speedcheck.h urldata.h curl_ldap.h escape.h telnet.h getinfo.h        \
 650   strequal.h curl_sec.h memdebug.h http_chunks.h curl_fnmatch.h         \
 651   wildcard.h fileinfo.h ftplistparser.h strtok.h connect.h llist.h      \
 652   hash.h content_encoding.h share.h curl_md4.h curl_md5.h http_digest.h \
 653   http_negotiate.h inet_pton.h amigaos.h strtoofft.h strerror.h         \
 654   inet_ntop.h curlx.h curl_memory.h curl_setup.h transfer.h select.h    \
 655   easyif.h multiif.h parsedate.h tftp.h sockaddr.h splay.h strdup.h     \
 656   socks.h ssh.h curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h      \
 657   slist.h nonblock.h curl_memrchr.h imap.h pop3.h smtp.h pingpong.h     \
 658   rtsp.h curl_threads.h warnless.h curl_hmac.h curl_rtmp.h              \
 659   curl_gethostname.h gopher.h http_proxy.h non-ascii.h asyn.h           \
 660   curl_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h             \
 661   curl_ntlm_msgs.h curl_sasl.h curl_multibyte.h hostcheck.h             \
 662   conncache.h curl_setup_once.h multihandle.h setup-vms.h pipeline.h    \
 663   dotdot.h x509asn1.h http2.h sigpipe.h smb.h curl_endian.h curl_des.h  \
 664   curl_printf.h
 665
 666 LIB_RCFILES = libcurl.rc
 667 CSOURCES = $(LIB_CFILES) $(LIB_VTLS_CFILES)
 668 HHEADERS = $(LIB_HFILES) $(LIB_VTLS_HFILES)
 669
 670 # libcurl has sources that provide functions named curlx_* that aren't part of
 671 # the official API, but we re-use the code here to avoid duplication.
 672 CURLX_CFILES = \
 673         ../lib/strtoofft.c \
 674         ../lib/rawstr.c \
 675         ../lib/nonblock.c \
 676         ../lib/warnless.c
 677
 678 CURLX_HFILES = \
 679         ../lib/curl_setup.h \
 680         ../lib/strtoofft.h \
 681         ../lib/rawstr.h \
 682         ../lib/nonblock.h \
 683         ../lib/warnless.h
 684
 685 CURL_CFILES = \
 686         slist_wc.c \
 687         tool_binmode.c \
 688         tool_bname.c \
 689         tool_cb_dbg.c \
 690         tool_cb_hdr.c \
 691         tool_cb_prg.c \
 692         tool_cb_rea.c \
 693         tool_cb_see.c \
 694         tool_cb_wrt.c \
 695         tool_cfgable.c \
 696         tool_convert.c \
 697         tool_dirhie.c \
 698         tool_doswin.c \
 699         tool_easysrc.c \
 700         tool_formparse.c \
 701         tool_getparam.c \
 702         tool_getpass.c \
 703         tool_help.c \
 704         tool_helpers.c \
 705         tool_homedir.c \
 706         tool_hugehelp.c \
 707         tool_libinfo.c \
 708         tool_main.c \
 709         tool_metalink.c \
 710         tool_mfiles.c \
 711         tool_msgs.c \
 712         tool_operate.c \
 713         tool_operhlp.c \
 714         tool_panykey.c \
 715         tool_paramhlp.c \
 716         tool_parsecfg.c \
 717         tool_strdup.c \
 718         tool_setopt.c \
 719         tool_sleep.c \
 720         tool_urlglob.c \
 721         tool_util.c \
 722         tool_vms.c \
 723         tool_writeenv.c \
 724         tool_writeout.c \
 725         tool_xattr.c
 726
 727 CURL_HFILES = \
 728         slist_wc.h \
 729         tool_binmode.h \
 730         tool_bname.h \
 731         tool_cb_dbg.h \
 732         tool_cb_hdr.h \
 733         tool_cb_prg.h \
 734         tool_cb_rea.h \
 735         tool_cb_see.h \
 736         tool_cb_wrt.h \
 737         tool_cfgable.h \
 738         tool_convert.h \
 739         tool_dirhie.h \
 740         tool_doswin.h \
 741         tool_easysrc.h \
 742         tool_formparse.h \
 743         tool_getparam.h \
 744         tool_getpass.h \
 745         tool_help.h \
 746         tool_helpers.h \
 747         tool_homedir.h \
 748         tool_hugehelp.h \
 749         tool_libinfo.h \
 750         tool_main.h \
 751         tool_metalink.h \
 752         tool_mfiles.h \
 753         tool_msgs.h \
 754         tool_operate.h \
 755         tool_operhlp.h \
 756         tool_panykey.h \
 757         tool_paramhlp.h \
 758         tool_parsecfg.h \
 759         tool_sdecls.h \
 760         tool_setopt.h \
 761         tool_setup.h \
 762         tool_sleep.h \
 763         tool_strdup.h \
 764         tool_urlglob.h \
 765         tool_util.h \
 766         tool_version.h \
 767         tool_vms.h \
 768         tool_writeenv.h \
 769         tool_writeout.h \
 770         tool_xattr.h
 771
 772 CURL_RCFILES = curl.rc
 773
 774 # curl_SOURCES is special and gets assigned in src/Makefile.am
 775 CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
 776 all: all-recursive
 777
 778 .SUFFIXES:
 779 am--refresh: Makefile
 780         @:
 781 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
 782         @for dep in $?; do \
 783           case '$(am__configure_deps)' in \
 784             *$$dep*) \
 785               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 786               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 787                 && exit 0; \
 788               exit 1;; \
 789           esac; \
 790         done; \
 791         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 792         $(am__cd) $(top_srcdir) && \
 793           $(AUTOMAKE) --foreign Makefile
 794 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 795         @case '$?' in \
 796           *config.status*) \
 797             echo ' $(SHELL) ./config.status'; \
 798             $(SHELL) ./config.status;; \
 799           *) \
 800             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 801             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 802         esac;
 803 $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty):
 804
 805 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 806         $(SHELL) ./config.status --recheck
 807
 808 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 809         $(am__cd) $(srcdir) && $(AUTOCONF)
 810 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 811         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 812 $(am__aclocal_m4_deps):
 813 curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
 814         cd $(top_builddir) && $(SHELL) ./config.status $@
 815 libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
 816         cd $(top_builddir) && $(SHELL) ./config.status $@
 817 install-binSCRIPTS: $(bin_SCRIPTS)
 818         @$(NORMAL_INSTALL)
 819         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
 820         if test -n "$$list"; then \
 821           echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
 822           $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
 823         fi; \
 824         for p in $$list; do \
 825           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 826           if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
 827         done | \
 828         sed -e 'p;s,.*/,,;n' \
 829             -e 'h;s|.*|.|' \
 830             -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
 831         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
 832           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 833             if ($$2 == $$4) { files[d] = files[d] " " $$1; \
 834               if (++n[d] == $(am__install_max)) { \
 835                 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
 836             else { print "f", d "/" $$4, $$1 } } \
 837           END { for (d in files) print "f", d, files[d] }' | \
 838         while read type dir files; do \
 839              if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 840              test -z "$$files" || { \
 841                echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 842                $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 843              } \
 844         ; done
 845
 846 uninstall-binSCRIPTS:
 847         @$(NORMAL_UNINSTALL)
 848         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
 849         files=`for p in $$list; do echo "$$p"; done | \
 850                sed -e 's,.*/,,;$(transform)'`; \
 851         dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
 852
 853 mostlyclean-libtool:
 854         -rm -f *.lo
 855
 856 clean-libtool:
 857         -rm -rf .libs _libs
 858
 859 distclean-libtool:
 860         -rm -f libtool config.lt
 861 install-pkgconfigDATA: $(pkgconfig_DATA)
 862         @$(NORMAL_INSTALL)
 863         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 864         if test -n "$$list"; then \
 865           echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
 866           $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
 867         fi; \
 868         for p in $$list; do \
 869           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 870           echo "$$d$$p"; \
 871         done | $(am__base_list) | \
 872         while read files; do \
 873           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
 874           $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 875         done
 876
 877 uninstall-pkgconfigDATA:
 878         @$(NORMAL_UNINSTALL)
 879         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 880         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 881         dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 882
 883 # This directory's subdirectories are mostly independent; you can cd
 884 # into them and run 'make' without going through this Makefile.
 885 # To change the values of 'make' variables: instead of editing Makefiles,
 886 # (1) if the variable is set in 'config.status', edit 'config.status'
 887 #     (which will cause the Makefiles to be regenerated when you run 'make');
 888 # (2) otherwise, pass the desired values on the 'make' command line.
 889 $(am__recursive_targets):
 890         @fail=; \
 891         if $(am__make_keepgoing); then \
 892           failcom='fail=yes'; \
 893         else \
 894           failcom='exit 1'; \
 895         fi; \
 896         dot_seen=no; \
 897         target=`echo $@ | sed s/-recursive//`; \
 898         case "$@" in \
 899           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 900           *) list='$(SUBDIRS)' ;; \
 901         esac; \
 902         for subdir in $$list; do \
 903           echo "Making $$target in $$subdir"; \
 904           if test "$$subdir" = "."; then \
 905             dot_seen=yes; \
 906             local_target="$$target-am"; \
 907           else \
 908             local_target="$$target"; \
 909           fi; \
 910           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 911           || eval $$failcom; \
 912         done; \
 913         if test "$$dot_seen" = "no"; then \
 914           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 915         fi; test -z "$$fail"
 916
 917 ID: $(am__tagged_files)
 918         $(am__define_uniq_tagged_files); mkid -fID $$unique
 919 tags: tags-recursive
 920 TAGS: tags
 921
 922 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 923         set x; \
 924         here=`pwd`; \
 925         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 926           include_option=--etags-include; \
 927           empty_fix=.; \
 928         else \
 929           include_option=--include; \
 930           empty_fix=; \
 931         fi; \
 932         list='$(SUBDIRS)'; for subdir in $$list; do \
 933           if test "$$subdir" = .; then :; else \
 934             test ! -f $$subdir/TAGS || \
 935               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 936           fi; \
 937         done; \
 938         $(am__define_uniq_tagged_files); \
 939         shift; \
 940         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 941           test -n "$$unique" || unique=$$empty_fix; \
 942           if test $$# -gt 0; then \
 943             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 944               "$$@" $$unique; \
 945           else \
 946             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 947               $$unique; \
 948           fi; \
 949         fi
 950 ctags: ctags-recursive
 951
 952 CTAGS: ctags
 953 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 954         $(am__define_uniq_tagged_files); \
 955         test -z "$(CTAGS_ARGS)$$unique" \
 956           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 957              $$unique
 958
 959 GTAGS:
 960         here=`$(am__cd) $(top_builddir) && pwd` \
 961           && $(am__cd) $(top_srcdir) \
 962           && gtags -i $(GTAGS_ARGS) "$$here"
 963 cscope: cscope.files
 964         test ! -s cscope.files \
 965           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 966 clean-cscope:
 967         -rm -f cscope.files
 968 cscope.files: clean-cscope cscopelist
 969 cscopelist: cscopelist-recursive
 970
 971 cscopelist-am: $(am__tagged_files)
 972         list='$(am__tagged_files)'; \
 973         case "$(srcdir)" in \
 974           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 975           *) sdir=$(subdir)/$(srcdir) ;; \
 976         esac; \
 977         for i in $$list; do \
 978           if test -f "$$i"; then \
 979             echo "$(subdir)/$$i"; \
 980           else \
 981             echo "$$sdir/$$i"; \
 982           fi; \
 983         done >> $(top_builddir)/cscope.files
 984
 985 distclean-tags:
 986         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 987         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 988
 989 distdir: $(DISTFILES)
 990         $(am__remove_distdir)
 991         test -d "$(distdir)" || mkdir "$(distdir)"
 992         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 993         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 994         list='$(DISTFILES)'; \
 995           dist_files=`for file in $$list; do echo $$file; done | \
 996           sed -e "s|^$$srcdirstrip/||;t" \
 997               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 998         case $$dist_files in \
 999           */*) $(MKDIR_P) `echo "$$dist_files" | \
1000                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1001                            sort -u` ;; \
1002         esac; \
1003         for file in $$dist_files; do \
1004           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1005           if test -d $$d/$$file; then \
1006             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1007             if test -d "$(distdir)/$$file"; then \
1008               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1009             fi; \
1010             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1011               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1012               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1013             fi; \
1014             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1015           else \
1016             test -f "$(distdir)/$$file" \
1017             || cp -p $$d/$$file "$(distdir)/$$file" \
1018             || exit 1; \
1019           fi; \
1020         done
1021         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1022           if test "$$subdir" = .; then :; else \
1023             $(am__make_dryrun) \
1024               || test -d "$(distdir)/$$subdir" \
1025               || $(MKDIR_P) "$(distdir)/$$subdir" \
1026               || exit 1; \
1027             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
1028             $(am__relativize); \
1029             new_distdir=$$reldir; \
1030             dir1=$$subdir; dir2="$(top_distdir)"; \
1031             $(am__relativize); \
1032             new_top_distdir=$$reldir; \
1033             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
1034             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
1035             ($(am__cd) $$subdir && \
1036               $(MAKE) $(AM_MAKEFLAGS) \
1037                 top_distdir="$$new_top_distdir" \
1038                 distdir="$$new_distdir" \
1039                 am__remove_distdir=: \
1040                 am__skip_length_check=: \
1041                 am__skip_mode_fix=: \
1042                 distdir) \
1043               || exit 1; \
1044           fi; \
1045         done
1046         $(MAKE) $(AM_MAKEFLAGS) \
1047           top_distdir="$(top_distdir)" distdir="$(distdir)" \
1048           dist-hook
1049         -test -n "$(am__skip_mode_fix)" \
1050         || find "$(distdir)" -type d ! -perm -755 \
1051                 -exec chmod u+rwx,go+rx {} \; -o \
1052           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1053           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1054           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1055         || chmod -R a+r "$(distdir)"
1056 dist-gzip: distdir
1057         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1058         $(am__post_remove_distdir)
1059
1060 dist-bzip2: distdir
1061         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
1062         $(am__post_remove_distdir)
1063
1064 dist-lzip: distdir
1065         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
1066         $(am__post_remove_distdir)
1067
1068 dist-xz: distdir
1069         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1070         $(am__post_remove_distdir)
1071
1072 dist-tarZ: distdir
1073         @echo WARNING: "Support for distribution archives compressed with" \
1074                        "legacy program 'compress' is deprecated." >&2
1075         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1076         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1077         $(am__post_remove_distdir)
1078
1079 dist-shar: distdir
1080         @echo WARNING: "Support for shar distribution archives is" \
1081                        "deprecated." >&2
1082         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1083         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1084         $(am__post_remove_distdir)
1085
1086 dist-zip: distdir
1087         -rm -f $(distdir).zip
1088         zip -rq $(distdir).zip $(distdir)
1089         $(am__post_remove_distdir)
1090
1091 dist dist-all:
1092         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
1093         $(am__post_remove_distdir)
1094
1095 # This target untars the dist file and tries a VPATH configuration.  Then
1096 # it guarantees that the distribution is self-contained by making another
1097 # tarfile.
1098 distcheck: dist
1099         case '$(DIST_ARCHIVES)' in \
1100         *.tar.gz*) \
1101           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
1102         *.tar.bz2*) \
1103           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1104         *.tar.lz*) \
1105           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1106         *.tar.xz*) \
1107           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1108         *.tar.Z*) \
1109           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1110         *.shar.gz*) \
1111           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
1112         *.zip*) \
1113           unzip $(distdir).zip ;;\
1114         esac
1115         chmod -R a-w $(distdir)
1116         chmod u+w $(distdir)
1117         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
1118         chmod a-w $(distdir)
1119         test -d $(distdir)/_build || exit 0; \
1120         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1121           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1122           && am__cwd=`pwd` \
1123           && $(am__cd) $(distdir)/_build/sub \
1124           && ../../configure \
1125             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1126             $(DISTCHECK_CONFIGURE_FLAGS) \
1127             --srcdir=../.. --prefix="$$dc_install_base" \
1128           && $(MAKE) $(AM_MAKEFLAGS) \
1129           && $(MAKE) $(AM_MAKEFLAGS) dvi \
1130           && $(MAKE) $(AM_MAKEFLAGS) check \
1131           && $(MAKE) $(AM_MAKEFLAGS) install \
1132           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1133           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1134           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1135                 distuninstallcheck \
1136           && chmod -R a-w "$$dc_install_base" \
1137           && ({ \
1138                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1139                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1140                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1141                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1142                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1143               } || { rm -rf "$$dc_destdir"; exit 1; }) \
1144           && rm -rf "$$dc_destdir" \
1145           && $(MAKE) $(AM_MAKEFLAGS) dist \
1146           && rm -rf $(DIST_ARCHIVES) \
1147           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1148           && cd "$$am__cwd" \
1149           || exit 1
1150         $(am__post_remove_distdir)
1151         @(echo "$(distdir) archives ready for distribution: "; \
1152           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1153           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1154 distuninstallcheck:
1155         @test -n '$(distuninstallcheck_dir)' || { \
1156           echo 'ERROR: trying to run $@ with an empty' \
1157                '$$(distuninstallcheck_dir)' >&2; \
1158           exit 1; \
1159         }; \
1160         $(am__cd) '$(distuninstallcheck_dir)' || { \
1161           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
1162           exit 1; \
1163         }; \
1164         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1165            || { echo "ERROR: files left after uninstall:" ; \
1166                 if test -n "$(DESTDIR)"; then \
1167                   echo "  (check DESTDIR support)"; \
1168                 fi ; \
1169                 $(distuninstallcheck_listfiles) ; \
1170                 exit 1; } >&2
1171 distcleancheck: distclean
1172         @if test '$(srcdir)' = . ; then \
1173           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1174           exit 1 ; \
1175         fi
1176         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1177           || { echo "ERROR: files left in build directory after distclean:" ; \
1178                $(distcleancheck_listfiles) ; \
1179                exit 1; } >&2
1180 check-am: all-am
1181 check: check-recursive
1182 all-am: Makefile $(SCRIPTS) $(DATA)
1183 installdirs: installdirs-recursive
1184 installdirs-am:
1185         for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
1186           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1187         done
1188 install: install-recursive
1189 install-exec: install-exec-recursive
1190 install-data: install-data-recursive
1191 uninstall: uninstall-recursive
1192
1193 install-am: all-am
1194         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1195
1196 installcheck: installcheck-recursive
1197 install-strip:
1198         if test -z '$(STRIP)'; then \
1199           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1200             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1201               install; \
1202         else \
1203           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1204             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1205             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1206         fi
1207 mostlyclean-generic:
1208
1209 clean-generic:
1210         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1211
1212 distclean-generic:
1213         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1214         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1215
1216 maintainer-clean-generic:
1217         @echo "This command is intended for maintainers to use"
1218         @echo "it deletes files that may require special tools to rebuild."
1219 clean: clean-recursive
1220
1221 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
1222
1223 distclean: distclean-recursive
1224         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1225         -rm -f Makefile
1226 distclean-am: clean-am distclean-generic distclean-libtool \
1227         distclean-tags
1228
1229 dvi: dvi-recursive
1230
1231 dvi-am:
1232
1233 html-am:
1234
1235 info: info-recursive
1236
1237 info-am:
1238
1239 install-data-am: install-pkgconfigDATA
1240         @$(NORMAL_INSTALL)
1241         $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1242 install-dvi: install-dvi-recursive
1243
1244 install-dvi-am:
1245
1246 install-exec-am: install-binSCRIPTS
1247
1248 install-html: install-html-recursive
1249
1250 install-html-am:
1251
1252 install-info: install-info-recursive
1253
1254 install-info-am:
1255
1256 install-man:
1257
1258 install-pdf: install-pdf-recursive
1259
1260 install-pdf-am:
1261
1262 install-ps: install-ps-recursive
1263
1264 install-ps-am:
1265
1266 installcheck-am:
1267
1268 maintainer-clean: maintainer-clean-recursive
1269         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1270         -rm -rf $(top_srcdir)/autom4te.cache
1271         -rm -f Makefile
1272 maintainer-clean-am: distclean-am maintainer-clean-generic
1273
1274 mostlyclean: mostlyclean-recursive
1275
1276 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1277
1278 pdf-am:
1279
1280 ps: ps-recursive
1281
1282 ps-am:
1283
1284 uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
1285         @$(NORMAL_INSTALL)
1286         $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
1287 .MAKE: $(am__recursive_targets) install-am install-data-am \
1288         install-strip uninstall-am
1289
1290 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1291         am--refresh check check-am clean clean-cscope clean-generic \
1292         clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
1293         dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
1294         dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1295         distclean-generic distclean-libtool distclean-tags \
1296         distcleancheck distdir distuninstallcheck dvi dvi-am html \
1297         html-am info info-am install install-am install-binSCRIPTS \
1298         install-data install-data-am install-data-hook install-dvi \
1299         install-dvi-am install-exec install-exec-am install-html \
1300         install-html-am install-info install-info-am install-man \
1301         install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1302         install-ps-am install-strip installcheck installcheck-am \
1303         installdirs installdirs-am maintainer-clean \
1304         maintainer-clean-generic mostlyclean mostlyclean-generic \
1305         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
1306         uninstall-am uninstall-binSCRIPTS uninstall-hook \
1307         uninstall-pkgconfigDATA
1308
1309 .PRECIOUS: Makefile
1310
1311
1312 # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files
1313
1314 dist-hook:
1315         rm -rf $(top_builddir)/tests/log
1316         find $(distdir) -name "*.dist" -exec rm {} \;
1317         (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
1318         for file in $$distit; do \
1319           strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
1320           cp $$file $(distdir)$$strip; \
1321         done)
1322
1323 html:
1324         cd docs && make html
1325
1326 pdf:
1327         cd docs && make pdf
1328
1329 check: test examples check-docs
1330
1331 @CROSSCOMPILING_TRUE@test-full: test
1332 @CROSSCOMPILING_TRUE@test-torture: test
1333
1334 @CROSSCOMPILING_TRUE@test:
1335 @CROSSCOMPILING_TRUE@   @echo "NOTICE: we can't run the tests when cross-compiling!"
1336
1337 @CROSSCOMPILING_FALSE@test:
1338 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all quiet-test)
1339
1340 @CROSSCOMPILING_FALSE@test-full:
1341 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all full-test)
1342
1343 @CROSSCOMPILING_FALSE@test-torture:
1344 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all torture-test)
1345
1346 @CROSSCOMPILING_FALSE@test-am:
1347 @CROSSCOMPILING_FALSE@  @(cd tests; $(MAKE) all am-test)
1348
1349 examples:
1350         @(cd docs/examples; $(MAKE) check)
1351
1352 check-docs:
1353         @(cd docs/libcurl; $(MAKE) check)
1354
1355 # This is a hook to have 'make clean' also clean up the docs and the tests
1356 # dir. The extra check for the Makefiles being present is necessary because
1357 # 'make distcheck' will make clean first in these directories _before_ it runs
1358 # this hook.
1359 clean-local:
1360         @(if test -f tests/Makefile; then cd tests; $(MAKE) clean; fi)
1361         @(if test -f docs/Makefile; then cd docs; $(MAKE) clean; fi)
1362
1363 #
1364 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
1365 # must contain the following line:
1366 # %_topdir /home/loic/local/rpm
1367 # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
1368 #
1369 # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
1370 #
1371 # If additional configure flags are needed to build the package, add the
1372 # following in ~/.rpmmacros
1373 # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
1374 # and run make rpm in the following way:
1375 # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
1376 #
1377
1378 rpms:
1379         $(MAKE) RPMDIST=curl rpm
1380         $(MAKE) RPMDIST=curl-ssl rpm
1381
1382 rpm:
1383         RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
1384         cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
1385         cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
1386         rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
1387         mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
1388         mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
1389
1390 #
1391 # Build a Solaris pkgadd format file
1392 # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
1393 # file (which ends up back in this directory).
1394 # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
1395 # pkgadd -d ./HAXXcurl-*
1396 #
1397
1398 # gak - libtool requires an absoulte directory, hence the pwd below...
1399 pkgadd:
1400         umask 022 ; \
1401         make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
1402         cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
1403         cd $(srcdir)/packages/Solaris && $(MAKE) package
1404
1405 #
1406 # Build a cygwin binary tarball installation file
1407 # resulting .tar.bz2 file will end up at packages/Win32/cygwin
1408 cygwinbin:
1409         $(MAKE) -C packages/Win32/cygwin cygwinbin
1410
1411 # We extend the standard install with a custom hook:
1412 install-data-hook:
1413         cd include && $(MAKE) install
1414         cd docs && $(MAKE) install
1415
1416 # We extend the standard uninstall with a custom hook:
1417 uninstall-hook:
1418         cd include && $(MAKE) uninstall
1419         cd docs && $(MAKE) uninstall
1420
1421 ca-bundle: lib/mk-ca-bundle.pl
1422         @echo "generating a fresh ca-bundle.crt"
1423         @perl $< -b -l -u lib/ca-bundle.crt
1424
1425 ca-firefox: lib/firefox-db2pem.sh
1426         @echo "generating a fresh ca-bundle.crt"
1427         ./lib/firefox-db2pem.sh lib/ca-bundle.crt
1428
1429 checksrc:
1430         cd lib && $(MAKE) checksrc
1431         cd src && $(MAKE) checksrc
1432
1433 .PHONY: vc-ide
1434
1435 vc-ide: $(VC6_LIBDSP_DEPS) $(VC6_SRCDSP_DEPS) $(VC7_LIBVCPROJ_DEPS)     \
1436  $(VC7_SRCVCPROJ_DEPS) $(VC71_LIBVCPROJ_DEPS) $(VC71_SRCVCPROJ_DEPS)    \
1437  $(VC8_LIBVCPROJ_DEPS) $(VC8_SRCVCPROJ_DEPS) $(VC9_LIBVCPROJ_DEPS)      \
1438  $(VC9_SRCVCPROJ_DEPS) $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS)  \
1439  $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS)        \
1440  $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS)
1441         @(win32_lib_srcs='$(LIB_CFILES)'; \
1442         win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
1443         win32_lib_rc='$(LIB_RCFILES)'; \
1444         win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
1445         win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
1446         win32_src_srcs='$(CURL_CFILES)'; \
1447         win32_src_hdrs='$(CURL_HFILES)'; \
1448         win32_src_rc='$(CURL_RCFILES)'; \
1449         win32_src_x_srcs='$(CURLX_CFILES)'; \
1450         win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
1451         \
1452         sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
1453         sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
1454         sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
1455         sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
1456         sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
1457         sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
1458         sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
1459         sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
1460         \
1461         awk_code='\
1462 function gen_element(type, dir, file)\
1463 {\
1464   sub(/vtls\//, "", file);\
1465 \
1466   spaces="    ";\
1467   if(dir == "lib\\vtls")\
1468     tabs="                              ";\
1469   else\
1470     tabs="                      ";\
1471 \
1472   if(type == "dsp") {\
1473     printf("# Begin Source File\r\n");\
1474     printf("\r\n");\
1475     printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
1476     printf("# End Source File\r\n");\
1477   }\
1478   else if(type == "vcproj1") {\
1479     printf("%s<File\r\n", tabs);\
1480     printf("%s  RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
1481            tabs, dir, file);\
1482     printf("%s</File>\r\n", tabs);\
1483   }\
1484   else if(type == "vcproj2") {\
1485     printf("%s<File\r\n", tabs);\
1486     printf("%s  RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
1487            tabs, dir, file);\
1488     printf("%s>\r\n", tabs);\
1489     printf("%s</File>\r\n", tabs);\
1490   }\
1491   else if(type == "vcxproj") {\
1492     i = index(file, ".");\
1493     ext = substr(file, i == 0 ? 0 : i + 1);\
1494 \
1495     if(ext == "c")\
1496       printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1497              spaces, dir, file);\
1498     else if(ext == "h")\
1499       printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1500              spaces, dir, file);\
1501     else if(ext == "rc")\
1502       printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1503       spaces, dir, file);\
1504   }\
1505 }\
1506 \
1507 {\
1508 \
1509   if($$0 == "CURL_LIB_C_FILES") {\
1510     split(lib_srcs, arr);\
1511     for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1512   }\
1513   else if($$0 == "CURL_LIB_H_FILES") {\
1514     split(lib_hdrs, arr);\
1515     for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1516   }\
1517   else if($$0 == "CURL_LIB_RC_FILES") {\
1518     split(lib_rc, arr);\
1519     for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1520   }\
1521   else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
1522     split(lib_vtls_srcs, arr);\
1523     for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1524   }\
1525   else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
1526     split(lib_vtls_hdrs, arr);\
1527     for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1528   }\
1529   else if($$0 == "CURL_SRC_C_FILES") {\
1530     split(src_srcs, arr);\
1531     for(val in arr) gen_element(proj_type, "src", arr[val]);\
1532   }\
1533   else if($$0 == "CURL_SRC_H_FILES") {\
1534     split(src_hdrs, arr);\
1535     for(val in arr) gen_element(proj_type, "src", arr[val]);\
1536   }\
1537   else if($$0 == "CURL_SRC_RC_FILES") {\
1538     split(src_rc, arr);\
1539     for(val in arr) gen_element(proj_type, "src", arr[val]);\
1540   }\
1541   else if($$0 == "CURL_SRC_X_C_FILES") {\
1542     split(src_x_srcs, arr);\
1543     for(val in arr) {\
1544       sub(/..\/lib\//, "", arr[val]);\
1545       gen_element(proj_type, "lib", arr[val]);\
1546     }\
1547   }\
1548   else if($$0 == "CURL_SRC_X_H_FILES") {\
1549     split(src_x_hdrs, arr);\
1550     for(val in arr) {\
1551       sub(/..\/lib\//, "", arr[val]);\
1552       gen_element(proj_type, "lib", arr[val]);\
1553     }\
1554   }\
1555   else\
1556     printf("%s\r\n", $$0);\
1557 }';\
1558         \
1559         echo "generating '$(VC6_LIBDSP)'"; \
1560         awk -v proj_type=dsp \
1561                 -v lib_srcs="$$sorted_lib_srcs" \
1562                 -v lib_hdrs="$$sorted_lib_hdrs" \
1563                 -v lib_rc="$$win32_lib_rc" \
1564                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1565                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1566                 "$$awk_code" $(srcdir)/$(VC6_LIBTMPL) > $(VC6_LIBDSP) || { exit 1; }; \
1567         \
1568         echo "generating '$(VC6_SRCDSP)'"; \
1569         awk -v proj_type=dsp \
1570                 -v src_srcs="$$sorted_src_srcs" \
1571                 -v src_hdrs="$$sorted_src_hdrs" \
1572                 -v src_rc="$$win32_src_rc" \
1573                 -v src_x_srcs="$$sorted_src_x_srcs" \
1574                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1575                 "$$awk_code" $(srcdir)/$(VC6_SRCTMPL) > $(VC6_SRCDSP) || { exit 1; }; \
1576         \
1577         echo "generating '$(VC7_LIBVCPROJ)'"; \
1578         awk -v proj_type=vcproj1 \
1579                 -v lib_srcs="$$sorted_lib_srcs" \
1580                 -v lib_hdrs="$$sorted_lib_hdrs" \
1581                 -v lib_rc="$$win32_lib_rc" \
1582                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1583                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1584                 "$$awk_code" $(srcdir)/$(VC7_LIBTMPL) > $(VC7_LIBVCPROJ) || { exit 1; }; \
1585         \
1586         echo "generating '$(VC7_SRCVCPROJ)'"; \
1587         awk -v proj_type=vcproj1 \
1588                 -v src_srcs="$$sorted_src_srcs" \
1589                 -v src_hdrs="$$sorted_src_hdrs" \
1590                 -v src_rc="$$win32_src_rc" \
1591                 -v src_x_srcs="$$sorted_src_x_srcs" \
1592                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1593                 "$$awk_code" $(srcdir)/$(VC7_SRCTMPL) > $(VC7_SRCVCPROJ) || { exit 1; }; \
1594         \
1595         echo "generating '$(VC71_LIBVCPROJ)'"; \
1596         awk -v proj_type=vcproj1 \
1597                 -v lib_srcs="$$sorted_lib_srcs" \
1598                 -v lib_hdrs="$$sorted_lib_hdrs" \
1599                 -v lib_rc="$$win32_lib_rc" \
1600                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1601                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1602                 "$$awk_code" $(srcdir)/$(VC71_LIBTMPL) > $(VC71_LIBVCPROJ) || { exit 1; }; \
1603         \
1604         echo "generating '$(VC71_SRCVCPROJ)'"; \
1605         awk -v proj_type=vcproj1 \
1606                 -v src_srcs="$$sorted_src_srcs" \
1607                 -v src_hdrs="$$sorted_src_hdrs" \
1608                 -v src_rc="$$win32_src_rc" \
1609                 -v src_x_srcs="$$sorted_src_x_srcs" \
1610                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1611                 "$$awk_code" $(srcdir)/$(VC71_SRCTMPL) > $(VC71_SRCVCPROJ) || { exit 1; }; \
1612         \
1613         echo "generating '$(VC8_LIBVCPROJ)'"; \
1614         awk -v proj_type=vcproj2 \
1615                 -v lib_srcs="$$sorted_lib_srcs" \
1616                 -v lib_hdrs="$$sorted_lib_hdrs" \
1617                 -v lib_rc="$$win32_lib_rc" \
1618                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1619                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1620                 "$$awk_code" $(srcdir)/$(VC8_LIBTMPL) > $(VC8_LIBVCPROJ) || { exit 1; }; \
1621         \
1622         echo "generating '$(VC8_SRCVCPROJ)'"; \
1623         awk -v proj_type=vcproj2 \
1624                 -v src_srcs="$$sorted_src_srcs" \
1625                 -v src_hdrs="$$sorted_src_hdrs" \
1626                 -v src_rc="$$win32_src_rc" \
1627                 -v src_x_srcs="$$sorted_src_x_srcs" \
1628                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1629                 "$$awk_code" $(srcdir)/$(VC8_SRCTMPL) > $(VC8_SRCVCPROJ) || { exit 1; }; \
1630         \
1631         echo "generating '$(VC9_LIBVCPROJ)'"; \
1632         awk -v proj_type=vcproj2 \
1633                 -v lib_srcs="$$sorted_lib_srcs" \
1634                 -v lib_hdrs="$$sorted_lib_hdrs" \
1635                 -v lib_rc="$$win32_lib_rc" \
1636                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1637                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1638                 "$$awk_code" $(srcdir)/$(VC9_LIBTMPL) > $(VC9_LIBVCPROJ) || { exit 1; }; \
1639         \
1640         echo "generating '$(VC9_SRCVCPROJ)'"; \
1641         awk -v proj_type=vcproj2 \
1642                 -v src_srcs="$$sorted_src_srcs" \
1643                 -v src_hdrs="$$sorted_src_hdrs" \
1644                 -v src_rc="$$win32_src_rc" \
1645                 -v src_x_srcs="$$sorted_src_x_srcs" \
1646                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1647                 "$$awk_code" $(srcdir)/$(VC9_SRCTMPL) > $(VC9_SRCVCPROJ) || { exit 1; }; \
1648         \
1649         echo "generating '$(VC10_LIBVCXPROJ)'"; \
1650         awk -v proj_type=vcxproj \
1651                 -v lib_srcs="$$sorted_lib_srcs" \
1652                 -v lib_hdrs="$$sorted_lib_hdrs" \
1653                 -v lib_rc="$$win32_lib_rc" \
1654                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1655                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1656                 "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \
1657         \
1658         echo "generating '$(VC10_SRCVCXPROJ)'"; \
1659         awk -v proj_type=vcxproj \
1660                 -v src_srcs="$$sorted_src_srcs" \
1661                 -v src_hdrs="$$sorted_src_hdrs" \
1662                 -v src_rc="$$win32_src_rc" \
1663                 -v src_x_srcs="$$sorted_src_x_srcs" \
1664                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1665                 "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \
1666         \
1667         echo "generating '$(VC11_LIBVCXPROJ)'"; \
1668         awk -v proj_type=vcxproj \
1669                 -v lib_srcs="$$sorted_lib_srcs" \
1670                 -v lib_hdrs="$$sorted_lib_hdrs" \
1671                 -v lib_rc="$$win32_lib_rc" \
1672                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1673                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1674                 "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \
1675         \
1676         echo "generating '$(VC11_SRCVCXPROJ)'"; \
1677         awk -v proj_type=vcxproj \
1678                 -v src_srcs="$$sorted_src_srcs" \
1679                 -v src_hdrs="$$sorted_src_hdrs" \
1680                 -v src_rc="$$win32_src_rc" \
1681                 -v src_x_srcs="$$sorted_src_x_srcs" \
1682                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1683                 "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \
1684         \
1685         echo "generating '$(VC12_LIBVCXPROJ)'"; \
1686         awk -v proj_type=vcxproj \
1687                 -v lib_srcs="$$sorted_lib_srcs" \
1688                 -v lib_hdrs="$$sorted_lib_hdrs" \
1689                 -v lib_rc="$$win32_lib_rc" \
1690                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1691                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1692                 "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \
1693         \
1694         echo "generating '$(VC12_SRCVCXPROJ)'"; \
1695         awk -v proj_type=vcxproj \
1696                 -v src_srcs="$$sorted_src_srcs" \
1697                 -v src_hdrs="$$sorted_src_hdrs" \
1698                 -v src_rc="$$win32_src_rc" \
1699                 -v src_x_srcs="$$sorted_src_x_srcs" \
1700                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1701                 "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \
1702         \
1703         echo "generating '$(VC14_LIBVCXPROJ)'"; \
1704         awk -v proj_type=vcxproj \
1705                 -v lib_srcs="$$sorted_lib_srcs" \
1706                 -v lib_hdrs="$$sorted_lib_hdrs" \
1707                 -v lib_rc="$$win32_lib_rc" \
1708                 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1709                 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1710                 "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \
1711         \
1712         echo "generating '$(VC14_SRCVCXPROJ)'"; \
1713         awk -v proj_type=vcxproj \
1714                 -v src_srcs="$$sorted_src_srcs" \
1715                 -v src_hdrs="$$sorted_src_hdrs" \
1716                 -v src_rc="$$win32_src_rc" \
1717                 -v src_x_srcs="$$sorted_src_x_srcs" \
1718                 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1719                 "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; };)
1720
1721 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1722 # Otherwise a system limit (for SysV at least) may be exceeded.
1723 .NOEXPORT: