1 # Makefile.in generated by automake 1.15 from Makefile.am.
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
17 #***************************************************************************
19 # Project ___| | | | _ \| |
21 # | (__| |_| | _ <| |___
22 # \___|\___/|_| \_\_____|
24 # Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
26 # This software is licensed as described in the file COPYING, which
27 # you should have received as part of this distribution. The terms
28 # are also available at https://curl.haxx.se/docs/copyright.html.
30 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
31 # copies of the Software, and permit persons to whom the Software is
32 # furnished to do so, under the terms of the COPYING file.
34 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
35 # KIND, either express or implied.
37 ###########################################################################
39 #***************************************************************************
41 # Project ___| | | | _ \| |
43 # | (__| |_| | _ <| |___
44 # \___|\___/|_| \_\_____|
46 # Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
48 # This software is licensed as described in the file COPYING, which
49 # you should have received as part of this distribution. The terms
50 # are also available at https://curl.haxx.se/docs/copyright.html.
52 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
53 # copies of the Software, and permit persons to whom the Software is
54 # furnished to do so, under the terms of the COPYING file.
56 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
57 # KIND, either express or implied.
59 ###########################################################################
62 # Using the backslash as line continuation character might be problematic
63 # with some make flavours, as Watcom's wmake showed us already. If we
64 # ever want to change this in a portable manner then we should consider
65 # this idea (posted to the libcurl list by Adam Kellas):
66 # CSRC1 = file1.c file2.c file3.c
67 # CSRC2 = file4.c file5.c file6.c
68 # CSOURCES = $(CSRC1) $(CSRC2)
73 if test -z '$(MAKELEVEL)'; then \
75 elif test -n '$(MAKE_HOST)'; then \
77 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
83 am__make_running_with_option = \
84 case $${target_option-} in \
86 *) echo "am__make_running_with_option: internal error: invalid" \
87 "target option '$${target_option-}' specified" >&2; \
91 sane_makeflags=$$MAKEFLAGS; \
92 if $(am__is_gnu_make); then \
93 sane_makeflags=$$MFLAGS; \
98 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
99 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
105 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
107 for flg in $$sane_makeflags; do \
108 test $$skip_next = yes && { skip_next=no; continue; }; \
110 *=*|--*) continue;; \
111 -*I) strip_trailopt 'I'; skip_next=yes;; \
112 -*I?*) strip_trailopt 'I';; \
113 -*O) strip_trailopt 'O'; skip_next=yes;; \
114 -*O?*) strip_trailopt 'O';; \
115 -*l) strip_trailopt 'l'; skip_next=yes;; \
116 -*l?*) strip_trailopt 'l';; \
117 -[dEDm]) skip_next=yes;; \
118 -[JT]) skip_next=yes;; \
121 *$$target_option*) has_opt=yes; break;; \
125 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
126 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
127 pkgdatadir = $(datadir)/@PACKAGE@
128 pkgincludedir = $(includedir)/@PACKAGE@
129 pkglibdir = $(libdir)/@PACKAGE@
130 pkglibexecdir = $(libexecdir)/@PACKAGE@
131 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
132 install_sh_DATA = $(install_sh) -c -m 644
133 install_sh_PROGRAM = $(install_sh) -c
134 install_sh_SCRIPT = $(install_sh) -c
135 INSTALL_HEADER = $(INSTALL_DATA)
136 transform = $(program_transform_name)
143 build_triplet = @build@
144 host_triplet = @host@
146 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
147 am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \
148 $(top_srcdir)/m4/curl-confopts.m4 \
149 $(top_srcdir)/m4/curl-functions.m4 \
150 $(top_srcdir)/m4/curl-openssl.m4 \
151 $(top_srcdir)/m4/curl-override.m4 \
152 $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
153 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
154 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
155 $(top_srcdir)/m4/xc-am-iface.m4 \
156 $(top_srcdir)/m4/xc-cc-check.m4 \
157 $(top_srcdir)/m4/xc-lt-iface.m4 \
158 $(top_srcdir)/m4/xc-translit.m4 \
159 $(top_srcdir)/m4/xc-val-flgs.m4 \
160 $(top_srcdir)/m4/zz40-xc-ovr.m4 \
161 $(top_srcdir)/m4/zz50-xc-ovr.m4 \
162 $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
163 $(top_srcdir)/configure.ac
164 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
166 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
167 $(am__configure_deps) $(am__DIST_COMMON)
168 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
169 configure.lineno config.status.lineno
170 mkinstalldirs = $(install_sh) -d
171 CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
172 $(top_builddir)/include/curl/curlbuild.h
173 CONFIG_CLEAN_FILES = curl-config libcurl.pc
174 CONFIG_CLEAN_VPATH_FILES =
175 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
176 am__vpath_adj = case $$p in \
177 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
180 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
182 am__nobase_strip_setup = \
183 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
185 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
186 am__nobase_list = $(am__nobase_strip_setup); \
187 for p in $$list; do echo "$$p $$p"; done | \
188 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
189 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
190 if (++n[$$2] == $(am__install_max)) \
191 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
192 END { for (dir in files) print dir, files[dir] }'
194 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
195 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
196 am__uninstall_files_from_dir = { \
198 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
199 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
200 $(am__cd) "$$dir" && rm -f $$files; }; \
202 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
203 SCRIPTS = $(bin_SCRIPTS)
204 AM_V_P = $(am__v_P_@AM_V@)
205 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
208 AM_V_GEN = $(am__v_GEN_@AM_V@)
209 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
210 am__v_GEN_0 = @echo " GEN " $@;
212 AM_V_at = $(am__v_at_@AM_V@)
213 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
218 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
219 ctags-recursive dvi-recursive html-recursive info-recursive \
220 install-data-recursive install-dvi-recursive \
221 install-exec-recursive install-html-recursive \
222 install-info-recursive install-pdf-recursive \
223 install-ps-recursive install-recursive installcheck-recursive \
224 installdirs-recursive pdf-recursive ps-recursive \
225 tags-recursive uninstall-recursive
226 am__can_run_installinfo = \
227 case $$AM_UPDATE_INFO_DIR in \
229 *) (install-info --version) >/dev/null 2>&1;; \
231 DATA = $(pkgconfig_DATA)
232 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
233 distclean-recursive maintainer-clean-recursive
234 am__recursive_targets = \
235 $(RECURSIVE_TARGETS) \
236 $(RECURSIVE_CLEAN_TARGETS) \
237 $(am__extra_recursive_targets)
238 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
239 cscope distdir dist dist-all distcheck
240 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
241 # Read a list of newline-separated strings from the standard input,
242 # and print each of them once, without duplicates. Input order is
244 am__uniquify_input = $(AWK) '\
245 BEGIN { nonempty = 0; } \
246 { items[$$0] = 1; nonempty = 1; } \
247 END { if (nonempty) { for (i in items) print i; }; } \
249 # Make sure the list of sources is unique. This is necessary because,
250 # e.g., the same source file might be shared among _SOURCES variables
251 # for different programs/libraries.
252 am__define_uniq_tagged_files = \
253 list='$(am__tagged_files)'; \
254 unique=`for i in $$list; do \
255 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
256 done | $(am__uniquify_input)`
260 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \
261 $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \
262 $(srcdir)/src/Makefile.inc COPYING README compile config.guess \
263 config.sub depcomp install-sh ltmain.sh missing
264 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
265 distdir = $(PACKAGE)-$(VERSION)
266 top_distdir = $(distdir)
267 am__remove_distdir = \
268 if test -d "$(distdir)"; then \
269 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
270 && rm -rf "$(distdir)" \
271 || { sleep 5 && rm -rf "$(distdir)"; }; \
273 am__post_remove_distdir = $(am__remove_distdir)
276 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
277 sed_rest='s,^[^/]*/*,,'; \
278 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
279 sed_butlast='s,/*[^/]*$$,,'; \
280 while test -n "$$dir1"; do \
281 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
282 if test "$$first" != "."; then \
283 if test "$$first" = ".."; then \
284 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
285 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
287 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
288 if test "$$first2" = "$$first"; then \
289 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
293 dir0="$$dir0"/"$$first"; \
296 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
299 DIST_ARCHIVES = $(distdir).tar.gz
301 DIST_TARGETS = dist-gzip
302 distuninstallcheck_listfiles = find . -type f -print
303 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
304 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
305 distcleancheck_listfiles = find . -type f -print
308 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
311 AUTOCONF = @AUTOCONF@
312 AUTOHEADER = @AUTOHEADER@
313 AUTOMAKE = @AUTOMAKE@
315 BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
317 CCDEPMODE = @CCDEPMODE@
319 CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
320 CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
322 CPPFLAGS = @CPPFLAGS@
323 CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
324 CURLVERSION = @CURLVERSION@
325 CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
326 CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
327 CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
328 CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
329 CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
330 CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
331 CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
332 CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
333 CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
334 CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
335 CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
336 CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
337 CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
338 CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
339 CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
340 CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
341 CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
342 CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
343 CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
344 CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
345 CYGPATH_W = @CYGPATH_W@
349 DSYMUTIL = @DSYMUTIL@
355 ENABLE_SHARED = @ENABLE_SHARED@
356 ENABLE_STATIC = @ENABLE_STATIC@
360 HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
361 HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
362 HAVE_LIBZ = @HAVE_LIBZ@
363 HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
364 IDN_ENABLED = @IDN_ENABLED@
366 INSTALL_DATA = @INSTALL_DATA@
367 INSTALL_PROGRAM = @INSTALL_PROGRAM@
368 INSTALL_SCRIPT = @INSTALL_SCRIPT@
369 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
370 IPV6_ENABLED = @IPV6_ENABLED@
373 LIBCURL_LIBS = @LIBCURL_LIBS@
374 LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
375 LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
376 LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
382 LTLIBOBJS = @LTLIBOBJS@
383 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
385 MAKEINFO = @MAKEINFO@
386 MANIFEST_TOOL = @MANIFEST_TOOL@
392 NSS_LIBS = @NSS_LIBS@
398 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
399 PACKAGE_NAME = @PACKAGE_NAME@
400 PACKAGE_STRING = @PACKAGE_STRING@
401 PACKAGE_TARNAME = @PACKAGE_TARNAME@
402 PACKAGE_URL = @PACKAGE_URL@
403 PACKAGE_VERSION = @PACKAGE_VERSION@
404 PATH_SEPARATOR = @PATH_SEPARATOR@
406 PKGADD_NAME = @PKGADD_NAME@
407 PKGADD_PKG = @PKGADD_PKG@
408 PKGADD_VENDOR = @PKGADD_VENDOR@
409 PKGCONFIG = @PKGCONFIG@
410 RANDOM_FILE = @RANDOM_FILE@
412 REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
414 SET_MAKE = @SET_MAKE@
416 SSL_ENABLED = @SSL_ENABLED@
417 SSL_LIBS = @SSL_LIBS@
419 SUPPORT_FEATURES = @SUPPORT_FEATURES@
420 SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
421 USE_ARES = @USE_ARES@
422 USE_AXTLS = @USE_AXTLS@
423 USE_CYASSL = @USE_CYASSL@
424 USE_DARWINSSL = @USE_DARWINSSL@
425 USE_GNUTLS = @USE_GNUTLS@
426 USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
427 USE_LIBRTMP = @USE_LIBRTMP@
428 USE_LIBSSH2 = @USE_LIBSSH2@
429 USE_MBEDTLS = @USE_MBEDTLS@
430 USE_NGHTTP2 = @USE_NGHTTP2@
432 USE_OPENLDAP = @USE_OPENLDAP@
433 USE_POLARSSL = @USE_POLARSSL@
434 USE_SCHANNEL = @USE_SCHANNEL@
435 USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
436 USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
438 VERSIONNUM = @VERSIONNUM@
439 ZLIB_LIBS = @ZLIB_LIBS@
440 ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
441 abs_builddir = @abs_builddir@
442 abs_srcdir = @abs_srcdir@
443 abs_top_builddir = @abs_top_builddir@
444 abs_top_srcdir = @abs_top_srcdir@
445 ac_ct_AR = @ac_ct_AR@
446 ac_ct_CC = @ac_ct_CC@
447 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
448 am__include = @am__include@
449 am__leading_dot = @am__leading_dot@
450 am__quote = @am__quote@
452 am__untar = @am__untar@
455 build_alias = @build_alias@
456 build_cpu = @build_cpu@
457 build_os = @build_os@
458 build_vendor = @build_vendor@
459 builddir = @builddir@
461 datarootdir = @datarootdir@
464 exec_prefix = @exec_prefix@
466 host_alias = @host_alias@
467 host_cpu = @host_cpu@
469 host_vendor = @host_vendor@
471 includedir = @includedir@
473 install_sh = @install_sh@
475 libexecdir = @libexecdir@
477 localedir = @localedir@
478 localstatedir = @localstatedir@
481 oldincludedir = @oldincludedir@
484 program_transform_name = @program_transform_name@
486 runstatedir = @runstatedir@
488 sharedstatedir = @sharedstatedir@
491 sysconfdir = @sysconfdir@
492 target_alias = @target_alias@
493 top_build_prefix = @top_build_prefix@
494 top_builddir = @top_builddir@
495 top_srcdir = @top_srcdir@
496 AUTOMAKE_OPTIONS = foreign
497 ACLOCAL_AMFLAGS = -I m4
498 CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in \
499 CMake/CurlTests.c CMake/FindGSS.cmake CMake/OtherTests.cmake \
500 CMake/Platforms/WindowsCache.cmake CMake/Utilities.cmake \
501 include/curl/curlbuild.h.cmake CMake/Macros.cmake
503 VC6_LIBTMPL = projects/Windows/VC6/lib/libcurl.tmpl
504 VC6_LIBDSP = projects/Windows/VC6/lib/libcurl.dsp.dist
505 VC6_LIBDSP_DEPS = $(VC6_LIBTMPL) Makefile.am lib/Makefile.inc
506 VC6_SRCTMPL = projects/Windows/VC6/src/curl.tmpl
507 VC6_SRCDSP = projects/Windows/VC6/src/curl.dsp.dist
508 VC6_SRCDSP_DEPS = $(VC6_SRCTMPL) Makefile.am src/Makefile.inc
509 VC7_LIBTMPL = projects/Windows/VC7/lib/libcurl.tmpl
510 VC7_LIBVCPROJ = projects/Windows/VC7/lib/libcurl.vcproj.dist
511 VC7_LIBVCPROJ_DEPS = $(VC7_LIBTMPL) Makefile.am lib/Makefile.inc
512 VC7_SRCTMPL = projects/Windows/VC7/src/curl.tmpl
513 VC7_SRCVCPROJ = projects/Windows/VC7/src/curl.vcproj.dist
514 VC7_SRCVCPROJ_DEPS = $(VC7_SRCTMPL) Makefile.am src/Makefile.inc
515 VC71_LIBTMPL = projects/Windows/VC7.1/lib/libcurl.tmpl
516 VC71_LIBVCPROJ = projects/Windows/VC7.1/lib/libcurl.vcproj.dist
517 VC71_LIBVCPROJ_DEPS = $(VC71_LIBTMPL) Makefile.am lib/Makefile.inc
518 VC71_SRCTMPL = projects/Windows/VC7.1/src/curl.tmpl
519 VC71_SRCVCPROJ = projects/Windows/VC7.1/src/curl.vcproj.dist
520 VC71_SRCVCPROJ_DEPS = $(VC71_SRCTMPL) Makefile.am src/Makefile.inc
521 VC8_LIBTMPL = projects/Windows/VC8/lib/libcurl.tmpl
522 VC8_LIBVCPROJ = projects/Windows/VC8/lib/libcurl.vcproj.dist
523 VC8_LIBVCPROJ_DEPS = $(VC8_LIBTMPL) Makefile.am lib/Makefile.inc
524 VC8_SRCTMPL = projects/Windows/VC8/src/curl.tmpl
525 VC8_SRCVCPROJ = projects/Windows/VC8/src/curl.vcproj.dist
526 VC8_SRCVCPROJ_DEPS = $(VC8_SRCTMPL) Makefile.am src/Makefile.inc
527 VC9_LIBTMPL = projects/Windows/VC9/lib/libcurl.tmpl
528 VC9_LIBVCPROJ = projects/Windows/VC9/lib/libcurl.vcproj.dist
529 VC9_LIBVCPROJ_DEPS = $(VC9_LIBTMPL) Makefile.am lib/Makefile.inc
530 VC9_SRCTMPL = projects/Windows/VC9/src/curl.tmpl
531 VC9_SRCVCPROJ = projects/Windows/VC9/src/curl.vcproj.dist
532 VC9_SRCVCPROJ_DEPS = $(VC9_SRCTMPL) Makefile.am src/Makefile.inc
533 VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl
534 VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist
535 VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc
536 VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl
537 VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist
538 VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc
539 VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl
540 VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist
541 VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc
542 VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl
543 VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist
544 VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc
545 VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl
546 VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist
547 VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc
548 VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl
549 VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist
550 VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc
551 VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl
552 VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist
553 VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc
554 VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl
555 VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist
556 VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc
557 VC_DIST = projects/README \
558 projects/build-openssl.bat \
559 projects/build-wolfssl.bat \
560 projects/checksrc.bat \
561 projects/Windows/VC6/curl-all.dsw \
562 projects/Windows/VC6/lib/libcurl.dsw \
563 projects/Windows/VC6/src/curl.dsw \
564 projects/Windows/VC7/curl-all.sln \
565 projects/Windows/VC7/lib/libcurl.sln \
566 projects/Windows/VC7/src/curl.sln \
567 projects/Windows/VC7.1/curl-all.sln \
568 projects/Windows/VC7.1/lib/libcurl.sln \
569 projects/Windows/VC7.1/src/curl.sln \
570 projects/Windows/VC8/curl-all.sln \
571 projects/Windows/VC8/lib/libcurl.sln \
572 projects/Windows/VC8/src/curl.sln \
573 projects/Windows/VC9/curl-all.sln \
574 projects/Windows/VC9/lib/libcurl.sln \
575 projects/Windows/VC9/src/curl.sln \
576 projects/Windows/VC10/curl-all.sln \
577 projects/Windows/VC10/lib/libcurl.sln \
578 projects/Windows/VC10/lib/libcurl.vcxproj.filters \
579 projects/Windows/VC10/src/curl.sln \
580 projects/Windows/VC10/src/curl.vcxproj.filters \
581 projects/Windows/VC11/curl-all.sln \
582 projects/Windows/VC11/lib/libcurl.sln \
583 projects/Windows/VC11/lib/libcurl.vcxproj.filters \
584 projects/Windows/VC11/src/curl.sln \
585 projects/Windows/VC11/src/curl.vcxproj.filters \
586 projects/Windows/VC12/curl-all.sln \
587 projects/Windows/VC12/lib/libcurl.sln \
588 projects/Windows/VC12/lib/libcurl.vcxproj.filters \
589 projects/Windows/VC12/src/curl.sln \
590 projects/Windows/VC12/src/curl.vcxproj.filters \
591 projects/Windows/VC14/curl-all.sln \
592 projects/Windows/VC14/lib/libcurl.sln \
593 projects/Windows/VC14/lib/libcurl.vcxproj.filters \
594 projects/Windows/VC14/src/curl.sln \
595 projects/Windows/VC14/src/curl.vcxproj.filters
597 WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat \
598 winbuild/MakefileBuild.vc winbuild/Makefile.vc \
599 winbuild/Makefile.msvc.names
601 EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \
602 RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework \
603 $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST) lib/libcurl.vers.in \
606 CLEANFILES = $(VC6_LIBDSP) $(VC6_SRCDSP) $(VC7_LIBVCPROJ) $(VC7_SRCVCPROJ) \
607 $(VC71_LIBVCPROJ) $(VC71_SRCVCPROJ) $(VC8_LIBVCPROJ) $(VC8_SRCVCPROJ) \
608 $(VC9_LIBVCPROJ) $(VC9_SRCVCPROJ) $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ) \
609 $(VC11_LIBVCXPROJ) $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ) \
610 $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ)
612 bin_SCRIPTS = curl-config
613 SUBDIRS = lib src include scripts
614 DIST_SUBDIRS = $(SUBDIRS) tests packages docs
615 pkgconfigdir = $(libdir)/pkgconfig
616 pkgconfig_DATA = libcurl.pc
617 LIB_VTLS_CFILES = vtls/openssl.c vtls/gtls.c vtls/vtls.c vtls/nss.c \
618 vtls/polarssl.c vtls/polarssl_threadlock.c vtls/axtls.c \
619 vtls/cyassl.c vtls/schannel.c vtls/darwinssl.c vtls/gskit.c \
622 LIB_VTLS_HFILES = vtls/openssl.h vtls/vtls.h vtls/gtls.h \
623 vtls/nssg.h vtls/polarssl.h vtls/polarssl_threadlock.h vtls/axtls.h \
624 vtls/cyassl.h vtls/schannel.h vtls/darwinssl.h vtls/gskit.h \
627 LIB_CFILES = file.c timeval.c base64.c hostip.c progress.c formdata.c \
628 cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c \
629 ldap.c version.c getenv.c escape.c mprintf.c telnet.c netrc.c \
630 getinfo.c transfer.c strequal.c easy.c security.c curl_fnmatch.c \
631 fileinfo.c ftplistparser.c wildcard.c krb5.c memdebug.c http_chunks.c \
632 strtok.c connect.c llist.c hash.c multi.c content_encoding.c share.c \
633 http_digest.c md4.c md5.c http_negotiate.c inet_pton.c strtoofft.c \
634 strerror.c amigaos.c hostasyn.c hostip4.c hostip6.c hostsyn.c \
635 inet_ntop.c parsedate.c select.c tftp.c splay.c strdup.c socks.c \
636 ssh.c rawstr.c curl_addrinfo.c socks_gssapi.c socks_sspi.c \
637 curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c \
638 pingpong.c rtsp.c curl_threads.c warnless.c hmac.c curl_rtmp.c \
639 openldap.c curl_gethostname.c gopher.c idn_win32.c \
640 http_negotiate_sspi.c http_proxy.c non-ascii.c asyn-ares.c \
641 asyn-thread.c curl_gssapi.c curl_ntlm.c curl_ntlm_wb.c \
642 curl_ntlm_core.c curl_ntlm_msgs.c curl_sasl.c curl_multibyte.c \
643 hostcheck.c conncache.c pipeline.c dotdot.c x509asn1.c \
644 http2.c curl_sasl_sspi.c smb.c curl_sasl_gssapi.c curl_endian.c \
647 LIB_HFILES = arpa_telnet.h netrc.h file.h timeval.h hostip.h progress.h \
648 formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h if2ip.h \
649 speedcheck.h urldata.h curl_ldap.h escape.h telnet.h getinfo.h \
650 strequal.h curl_sec.h memdebug.h http_chunks.h curl_fnmatch.h \
651 wildcard.h fileinfo.h ftplistparser.h strtok.h connect.h llist.h \
652 hash.h content_encoding.h share.h curl_md4.h curl_md5.h http_digest.h \
653 http_negotiate.h inet_pton.h amigaos.h strtoofft.h strerror.h \
654 inet_ntop.h curlx.h curl_memory.h curl_setup.h transfer.h select.h \
655 easyif.h multiif.h parsedate.h tftp.h sockaddr.h splay.h strdup.h \
656 socks.h ssh.h curl_base64.h rawstr.h curl_addrinfo.h curl_sspi.h \
657 slist.h nonblock.h curl_memrchr.h imap.h pop3.h smtp.h pingpong.h \
658 rtsp.h curl_threads.h warnless.h curl_hmac.h curl_rtmp.h \
659 curl_gethostname.h gopher.h http_proxy.h non-ascii.h asyn.h \
660 curl_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h \
661 curl_ntlm_msgs.h curl_sasl.h curl_multibyte.h hostcheck.h \
662 conncache.h curl_setup_once.h multihandle.h setup-vms.h pipeline.h \
663 dotdot.h x509asn1.h http2.h sigpipe.h smb.h curl_endian.h curl_des.h \
666 LIB_RCFILES = libcurl.rc
667 CSOURCES = $(LIB_CFILES) $(LIB_VTLS_CFILES)
668 HHEADERS = $(LIB_HFILES) $(LIB_VTLS_HFILES)
670 # libcurl has sources that provide functions named curlx_* that aren't part of
671 # the official API, but we re-use the code here to avoid duplication.
679 ../lib/curl_setup.h \
772 CURL_RCFILES = curl.rc
774 # curl_SOURCES is special and gets assigned in src/Makefile.am
775 CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
779 am--refresh: Makefile
781 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
783 case '$(am__configure_deps)' in \
785 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
786 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
791 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
792 $(am__cd) $(top_srcdir) && \
793 $(AUTOMAKE) --foreign Makefile
794 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
797 echo ' $(SHELL) ./config.status'; \
798 $(SHELL) ./config.status;; \
800 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
801 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
803 $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty):
805 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
806 $(SHELL) ./config.status --recheck
808 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
809 $(am__cd) $(srcdir) && $(AUTOCONF)
810 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
811 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
812 $(am__aclocal_m4_deps):
813 curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
814 cd $(top_builddir) && $(SHELL) ./config.status $@
815 libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
816 cd $(top_builddir) && $(SHELL) ./config.status $@
817 install-binSCRIPTS: $(bin_SCRIPTS)
819 @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
820 if test -n "$$list"; then \
821 echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
822 $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
824 for p in $$list; do \
825 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
826 if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
828 sed -e 'p;s,.*/,,;n' \
830 -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
831 $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
832 { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
833 if ($$2 == $$4) { files[d] = files[d] " " $$1; \
834 if (++n[d] == $(am__install_max)) { \
835 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
836 else { print "f", d "/" $$4, $$1 } } \
837 END { for (d in files) print "f", d, files[d] }' | \
838 while read type dir files; do \
839 if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
840 test -z "$$files" || { \
841 echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
842 $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
846 uninstall-binSCRIPTS:
848 @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
849 files=`for p in $$list; do echo "$$p"; done | \
850 sed -e 's,.*/,,;$(transform)'`; \
851 dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
860 -rm -f libtool config.lt
861 install-pkgconfigDATA: $(pkgconfig_DATA)
863 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
864 if test -n "$$list"; then \
865 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
866 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
868 for p in $$list; do \
869 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
871 done | $(am__base_list) | \
872 while read files; do \
873 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
874 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
877 uninstall-pkgconfigDATA:
879 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
880 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
881 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
883 # This directory's subdirectories are mostly independent; you can cd
884 # into them and run 'make' without going through this Makefile.
885 # To change the values of 'make' variables: instead of editing Makefiles,
886 # (1) if the variable is set in 'config.status', edit 'config.status'
887 # (which will cause the Makefiles to be regenerated when you run 'make');
888 # (2) otherwise, pass the desired values on the 'make' command line.
889 $(am__recursive_targets):
891 if $(am__make_keepgoing); then \
892 failcom='fail=yes'; \
897 target=`echo $@ | sed s/-recursive//`; \
899 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
900 *) list='$(SUBDIRS)' ;; \
902 for subdir in $$list; do \
903 echo "Making $$target in $$subdir"; \
904 if test "$$subdir" = "."; then \
906 local_target="$$target-am"; \
908 local_target="$$target"; \
910 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
913 if test "$$dot_seen" = "no"; then \
914 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
917 ID: $(am__tagged_files)
918 $(am__define_uniq_tagged_files); mkid -fID $$unique
922 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
925 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
926 include_option=--etags-include; \
929 include_option=--include; \
932 list='$(SUBDIRS)'; for subdir in $$list; do \
933 if test "$$subdir" = .; then :; else \
934 test ! -f $$subdir/TAGS || \
935 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
938 $(am__define_uniq_tagged_files); \
940 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
941 test -n "$$unique" || unique=$$empty_fix; \
942 if test $$# -gt 0; then \
943 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
946 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
950 ctags: ctags-recursive
953 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
954 $(am__define_uniq_tagged_files); \
955 test -z "$(CTAGS_ARGS)$$unique" \
956 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
960 here=`$(am__cd) $(top_builddir) && pwd` \
961 && $(am__cd) $(top_srcdir) \
962 && gtags -i $(GTAGS_ARGS) "$$here"
964 test ! -s cscope.files \
965 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
968 cscope.files: clean-cscope cscopelist
969 cscopelist: cscopelist-recursive
971 cscopelist-am: $(am__tagged_files)
972 list='$(am__tagged_files)'; \
973 case "$(srcdir)" in \
974 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
975 *) sdir=$(subdir)/$(srcdir) ;; \
977 for i in $$list; do \
978 if test -f "$$i"; then \
979 echo "$(subdir)/$$i"; \
983 done >> $(top_builddir)/cscope.files
986 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
987 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
989 distdir: $(DISTFILES)
990 $(am__remove_distdir)
991 test -d "$(distdir)" || mkdir "$(distdir)"
992 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
993 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
994 list='$(DISTFILES)'; \
995 dist_files=`for file in $$list; do echo $$file; done | \
996 sed -e "s|^$$srcdirstrip/||;t" \
997 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
998 case $$dist_files in \
999 */*) $(MKDIR_P) `echo "$$dist_files" | \
1000 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1003 for file in $$dist_files; do \
1004 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1005 if test -d $$d/$$file; then \
1006 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1007 if test -d "$(distdir)/$$file"; then \
1008 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1010 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1011 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1012 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1014 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1016 test -f "$(distdir)/$$file" \
1017 || cp -p $$d/$$file "$(distdir)/$$file" \
1021 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1022 if test "$$subdir" = .; then :; else \
1023 $(am__make_dryrun) \
1024 || test -d "$(distdir)/$$subdir" \
1025 || $(MKDIR_P) "$(distdir)/$$subdir" \
1027 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
1028 $(am__relativize); \
1029 new_distdir=$$reldir; \
1030 dir1=$$subdir; dir2="$(top_distdir)"; \
1031 $(am__relativize); \
1032 new_top_distdir=$$reldir; \
1033 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
1034 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
1035 ($(am__cd) $$subdir && \
1036 $(MAKE) $(AM_MAKEFLAGS) \
1037 top_distdir="$$new_top_distdir" \
1038 distdir="$$new_distdir" \
1039 am__remove_distdir=: \
1040 am__skip_length_check=: \
1041 am__skip_mode_fix=: \
1046 $(MAKE) $(AM_MAKEFLAGS) \
1047 top_distdir="$(top_distdir)" distdir="$(distdir)" \
1049 -test -n "$(am__skip_mode_fix)" \
1050 || find "$(distdir)" -type d ! -perm -755 \
1051 -exec chmod u+rwx,go+rx {} \; -o \
1052 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1053 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1054 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1055 || chmod -R a+r "$(distdir)"
1057 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1058 $(am__post_remove_distdir)
1061 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
1062 $(am__post_remove_distdir)
1065 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
1066 $(am__post_remove_distdir)
1069 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1070 $(am__post_remove_distdir)
1073 @echo WARNING: "Support for distribution archives compressed with" \
1074 "legacy program 'compress' is deprecated." >&2
1075 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1076 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1077 $(am__post_remove_distdir)
1080 @echo WARNING: "Support for shar distribution archives is" \
1082 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1083 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1084 $(am__post_remove_distdir)
1087 -rm -f $(distdir).zip
1088 zip -rq $(distdir).zip $(distdir)
1089 $(am__post_remove_distdir)
1092 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
1093 $(am__post_remove_distdir)
1095 # This target untars the dist file and tries a VPATH configuration. Then
1096 # it guarantees that the distribution is self-contained by making another
1099 case '$(DIST_ARCHIVES)' in \
1101 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
1103 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1105 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1107 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1109 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1111 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
1113 unzip $(distdir).zip ;;\
1115 chmod -R a-w $(distdir)
1116 chmod u+w $(distdir)
1117 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
1118 chmod a-w $(distdir)
1119 test -d $(distdir)/_build || exit 0; \
1120 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1121 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1123 && $(am__cd) $(distdir)/_build/sub \
1124 && ../../configure \
1125 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1126 $(DISTCHECK_CONFIGURE_FLAGS) \
1127 --srcdir=../.. --prefix="$$dc_install_base" \
1128 && $(MAKE) $(AM_MAKEFLAGS) \
1129 && $(MAKE) $(AM_MAKEFLAGS) dvi \
1130 && $(MAKE) $(AM_MAKEFLAGS) check \
1131 && $(MAKE) $(AM_MAKEFLAGS) install \
1132 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1133 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1134 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1135 distuninstallcheck \
1136 && chmod -R a-w "$$dc_install_base" \
1138 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1139 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1140 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1141 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1142 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1143 } || { rm -rf "$$dc_destdir"; exit 1; }) \
1144 && rm -rf "$$dc_destdir" \
1145 && $(MAKE) $(AM_MAKEFLAGS) dist \
1146 && rm -rf $(DIST_ARCHIVES) \
1147 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1150 $(am__post_remove_distdir)
1151 @(echo "$(distdir) archives ready for distribution: "; \
1152 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1153 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1155 @test -n '$(distuninstallcheck_dir)' || { \
1156 echo 'ERROR: trying to run $@ with an empty' \
1157 '$$(distuninstallcheck_dir)' >&2; \
1160 $(am__cd) '$(distuninstallcheck_dir)' || { \
1161 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
1164 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1165 || { echo "ERROR: files left after uninstall:" ; \
1166 if test -n "$(DESTDIR)"; then \
1167 echo " (check DESTDIR support)"; \
1169 $(distuninstallcheck_listfiles) ; \
1171 distcleancheck: distclean
1172 @if test '$(srcdir)' = . ; then \
1173 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1176 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1177 || { echo "ERROR: files left in build directory after distclean:" ; \
1178 $(distcleancheck_listfiles) ; \
1181 check: check-recursive
1182 all-am: Makefile $(SCRIPTS) $(DATA)
1183 installdirs: installdirs-recursive
1185 for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
1186 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1188 install: install-recursive
1189 install-exec: install-exec-recursive
1190 install-data: install-data-recursive
1191 uninstall: uninstall-recursive
1194 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1196 installcheck: installcheck-recursive
1198 if test -z '$(STRIP)'; then \
1199 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1200 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1203 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1204 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1205 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1207 mostlyclean-generic:
1210 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1213 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1214 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1216 maintainer-clean-generic:
1217 @echo "This command is intended for maintainers to use"
1218 @echo "it deletes files that may require special tools to rebuild."
1219 clean: clean-recursive
1221 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
1223 distclean: distclean-recursive
1224 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1226 distclean-am: clean-am distclean-generic distclean-libtool \
1235 info: info-recursive
1239 install-data-am: install-pkgconfigDATA
1241 $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1242 install-dvi: install-dvi-recursive
1246 install-exec-am: install-binSCRIPTS
1248 install-html: install-html-recursive
1252 install-info: install-info-recursive
1258 install-pdf: install-pdf-recursive
1262 install-ps: install-ps-recursive
1268 maintainer-clean: maintainer-clean-recursive
1269 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1270 -rm -rf $(top_srcdir)/autom4te.cache
1272 maintainer-clean-am: distclean-am maintainer-clean-generic
1274 mostlyclean: mostlyclean-recursive
1276 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1284 uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
1286 $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
1287 .MAKE: $(am__recursive_targets) install-am install-data-am \
1288 install-strip uninstall-am
1290 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1291 am--refresh check check-am clean clean-cscope clean-generic \
1292 clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
1293 dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
1294 dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1295 distclean-generic distclean-libtool distclean-tags \
1296 distcleancheck distdir distuninstallcheck dvi dvi-am html \
1297 html-am info info-am install install-am install-binSCRIPTS \
1298 install-data install-data-am install-data-hook install-dvi \
1299 install-dvi-am install-exec install-exec-am install-html \
1300 install-html-am install-info install-info-am install-man \
1301 install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1302 install-ps-am install-strip installcheck installcheck-am \
1303 installdirs installdirs-am maintainer-clean \
1304 maintainer-clean-generic mostlyclean mostlyclean-generic \
1305 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
1306 uninstall-am uninstall-binSCRIPTS uninstall-hook \
1307 uninstall-pkgconfigDATA
1312 # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files
1315 rm -rf $(top_builddir)/tests/log
1316 find $(distdir) -name "*.dist" -exec rm {} \;
1317 (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
1318 for file in $$distit; do \
1319 strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
1320 cp $$file $(distdir)$$strip; \
1324 cd docs && make html
1329 check: test examples check-docs
1331 @CROSSCOMPILING_TRUE@test-full: test
1332 @CROSSCOMPILING_TRUE@test-torture: test
1334 @CROSSCOMPILING_TRUE@test:
1335 @CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!"
1337 @CROSSCOMPILING_FALSE@test:
1338 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test)
1340 @CROSSCOMPILING_FALSE@test-full:
1341 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test)
1343 @CROSSCOMPILING_FALSE@test-torture:
1344 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test)
1346 @CROSSCOMPILING_FALSE@test-am:
1347 @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test)
1350 @(cd docs/examples; $(MAKE) check)
1353 @(cd docs/libcurl; $(MAKE) check)
1355 # This is a hook to have 'make clean' also clean up the docs and the tests
1356 # dir. The extra check for the Makefiles being present is necessary because
1357 # 'make distcheck' will make clean first in these directories _before_ it runs
1360 @(if test -f tests/Makefile; then cd tests; $(MAKE) clean; fi)
1361 @(if test -f docs/Makefile; then cd docs; $(MAKE) clean; fi)
1364 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
1365 # must contain the following line:
1366 # %_topdir /home/loic/local/rpm
1367 # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
1369 # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
1371 # If additional configure flags are needed to build the package, add the
1372 # following in ~/.rpmmacros
1373 # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
1374 # and run make rpm in the following way:
1375 # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
1379 $(MAKE) RPMDIST=curl rpm
1380 $(MAKE) RPMDIST=curl-ssl rpm
1383 RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
1384 cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
1385 cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
1386 rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
1387 mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
1388 mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
1391 # Build a Solaris pkgadd format file
1392 # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
1393 # file (which ends up back in this directory).
1394 # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
1395 # pkgadd -d ./HAXXcurl-*
1398 # gak - libtool requires an absoulte directory, hence the pwd below...
1401 make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
1402 cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
1403 cd $(srcdir)/packages/Solaris && $(MAKE) package
1406 # Build a cygwin binary tarball installation file
1407 # resulting .tar.bz2 file will end up at packages/Win32/cygwin
1409 $(MAKE) -C packages/Win32/cygwin cygwinbin
1411 # We extend the standard install with a custom hook:
1413 cd include && $(MAKE) install
1414 cd docs && $(MAKE) install
1416 # We extend the standard uninstall with a custom hook:
1418 cd include && $(MAKE) uninstall
1419 cd docs && $(MAKE) uninstall
1421 ca-bundle: lib/mk-ca-bundle.pl
1422 @echo "generating a fresh ca-bundle.crt"
1423 @perl $< -b -l -u lib/ca-bundle.crt
1425 ca-firefox: lib/firefox-db2pem.sh
1426 @echo "generating a fresh ca-bundle.crt"
1427 ./lib/firefox-db2pem.sh lib/ca-bundle.crt
1430 cd lib && $(MAKE) checksrc
1431 cd src && $(MAKE) checksrc
1435 vc-ide: $(VC6_LIBDSP_DEPS) $(VC6_SRCDSP_DEPS) $(VC7_LIBVCPROJ_DEPS) \
1436 $(VC7_SRCVCPROJ_DEPS) $(VC71_LIBVCPROJ_DEPS) $(VC71_SRCVCPROJ_DEPS) \
1437 $(VC8_LIBVCPROJ_DEPS) $(VC8_SRCVCPROJ_DEPS) $(VC9_LIBVCPROJ_DEPS) \
1438 $(VC9_SRCVCPROJ_DEPS) $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS) \
1439 $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS) \
1440 $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS)
1441 @(win32_lib_srcs='$(LIB_CFILES)'; \
1442 win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
1443 win32_lib_rc='$(LIB_RCFILES)'; \
1444 win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
1445 win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
1446 win32_src_srcs='$(CURL_CFILES)'; \
1447 win32_src_hdrs='$(CURL_HFILES)'; \
1448 win32_src_rc='$(CURL_RCFILES)'; \
1449 win32_src_x_srcs='$(CURLX_CFILES)'; \
1450 win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
1452 sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
1453 sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
1454 sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
1455 sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
1456 sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
1457 sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
1458 sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
1459 sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
1462 function gen_element(type, dir, file)\
1464 sub(/vtls\//, "", file);\
1467 if(dir == "lib\\vtls")\
1472 if(type == "dsp") {\
1473 printf("# Begin Source File\r\n");\
1475 printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
1476 printf("# End Source File\r\n");\
1478 else if(type == "vcproj1") {\
1479 printf("%s<File\r\n", tabs);\
1480 printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
1482 printf("%s</File>\r\n", tabs);\
1484 else if(type == "vcproj2") {\
1485 printf("%s<File\r\n", tabs);\
1486 printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
1488 printf("%s>\r\n", tabs);\
1489 printf("%s</File>\r\n", tabs);\
1491 else if(type == "vcxproj") {\
1492 i = index(file, ".");\
1493 ext = substr(file, i == 0 ? 0 : i + 1);\
1496 printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1497 spaces, dir, file);\
1498 else if(ext == "h")\
1499 printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1500 spaces, dir, file);\
1501 else if(ext == "rc")\
1502 printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
1503 spaces, dir, file);\
1509 if($$0 == "CURL_LIB_C_FILES") {\
1510 split(lib_srcs, arr);\
1511 for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1513 else if($$0 == "CURL_LIB_H_FILES") {\
1514 split(lib_hdrs, arr);\
1515 for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1517 else if($$0 == "CURL_LIB_RC_FILES") {\
1518 split(lib_rc, arr);\
1519 for(val in arr) gen_element(proj_type, "lib", arr[val]);\
1521 else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
1522 split(lib_vtls_srcs, arr);\
1523 for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1525 else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
1526 split(lib_vtls_hdrs, arr);\
1527 for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
1529 else if($$0 == "CURL_SRC_C_FILES") {\
1530 split(src_srcs, arr);\
1531 for(val in arr) gen_element(proj_type, "src", arr[val]);\
1533 else if($$0 == "CURL_SRC_H_FILES") {\
1534 split(src_hdrs, arr);\
1535 for(val in arr) gen_element(proj_type, "src", arr[val]);\
1537 else if($$0 == "CURL_SRC_RC_FILES") {\
1538 split(src_rc, arr);\
1539 for(val in arr) gen_element(proj_type, "src", arr[val]);\
1541 else if($$0 == "CURL_SRC_X_C_FILES") {\
1542 split(src_x_srcs, arr);\
1544 sub(/..\/lib\//, "", arr[val]);\
1545 gen_element(proj_type, "lib", arr[val]);\
1548 else if($$0 == "CURL_SRC_X_H_FILES") {\
1549 split(src_x_hdrs, arr);\
1551 sub(/..\/lib\//, "", arr[val]);\
1552 gen_element(proj_type, "lib", arr[val]);\
1556 printf("%s\r\n", $$0);\
1559 echo "generating '$(VC6_LIBDSP)'"; \
1560 awk -v proj_type=dsp \
1561 -v lib_srcs="$$sorted_lib_srcs" \
1562 -v lib_hdrs="$$sorted_lib_hdrs" \
1563 -v lib_rc="$$win32_lib_rc" \
1564 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1565 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1566 "$$awk_code" $(srcdir)/$(VC6_LIBTMPL) > $(VC6_LIBDSP) || { exit 1; }; \
1568 echo "generating '$(VC6_SRCDSP)'"; \
1569 awk -v proj_type=dsp \
1570 -v src_srcs="$$sorted_src_srcs" \
1571 -v src_hdrs="$$sorted_src_hdrs" \
1572 -v src_rc="$$win32_src_rc" \
1573 -v src_x_srcs="$$sorted_src_x_srcs" \
1574 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1575 "$$awk_code" $(srcdir)/$(VC6_SRCTMPL) > $(VC6_SRCDSP) || { exit 1; }; \
1577 echo "generating '$(VC7_LIBVCPROJ)'"; \
1578 awk -v proj_type=vcproj1 \
1579 -v lib_srcs="$$sorted_lib_srcs" \
1580 -v lib_hdrs="$$sorted_lib_hdrs" \
1581 -v lib_rc="$$win32_lib_rc" \
1582 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1583 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1584 "$$awk_code" $(srcdir)/$(VC7_LIBTMPL) > $(VC7_LIBVCPROJ) || { exit 1; }; \
1586 echo "generating '$(VC7_SRCVCPROJ)'"; \
1587 awk -v proj_type=vcproj1 \
1588 -v src_srcs="$$sorted_src_srcs" \
1589 -v src_hdrs="$$sorted_src_hdrs" \
1590 -v src_rc="$$win32_src_rc" \
1591 -v src_x_srcs="$$sorted_src_x_srcs" \
1592 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1593 "$$awk_code" $(srcdir)/$(VC7_SRCTMPL) > $(VC7_SRCVCPROJ) || { exit 1; }; \
1595 echo "generating '$(VC71_LIBVCPROJ)'"; \
1596 awk -v proj_type=vcproj1 \
1597 -v lib_srcs="$$sorted_lib_srcs" \
1598 -v lib_hdrs="$$sorted_lib_hdrs" \
1599 -v lib_rc="$$win32_lib_rc" \
1600 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1601 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1602 "$$awk_code" $(srcdir)/$(VC71_LIBTMPL) > $(VC71_LIBVCPROJ) || { exit 1; }; \
1604 echo "generating '$(VC71_SRCVCPROJ)'"; \
1605 awk -v proj_type=vcproj1 \
1606 -v src_srcs="$$sorted_src_srcs" \
1607 -v src_hdrs="$$sorted_src_hdrs" \
1608 -v src_rc="$$win32_src_rc" \
1609 -v src_x_srcs="$$sorted_src_x_srcs" \
1610 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1611 "$$awk_code" $(srcdir)/$(VC71_SRCTMPL) > $(VC71_SRCVCPROJ) || { exit 1; }; \
1613 echo "generating '$(VC8_LIBVCPROJ)'"; \
1614 awk -v proj_type=vcproj2 \
1615 -v lib_srcs="$$sorted_lib_srcs" \
1616 -v lib_hdrs="$$sorted_lib_hdrs" \
1617 -v lib_rc="$$win32_lib_rc" \
1618 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1619 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1620 "$$awk_code" $(srcdir)/$(VC8_LIBTMPL) > $(VC8_LIBVCPROJ) || { exit 1; }; \
1622 echo "generating '$(VC8_SRCVCPROJ)'"; \
1623 awk -v proj_type=vcproj2 \
1624 -v src_srcs="$$sorted_src_srcs" \
1625 -v src_hdrs="$$sorted_src_hdrs" \
1626 -v src_rc="$$win32_src_rc" \
1627 -v src_x_srcs="$$sorted_src_x_srcs" \
1628 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1629 "$$awk_code" $(srcdir)/$(VC8_SRCTMPL) > $(VC8_SRCVCPROJ) || { exit 1; }; \
1631 echo "generating '$(VC9_LIBVCPROJ)'"; \
1632 awk -v proj_type=vcproj2 \
1633 -v lib_srcs="$$sorted_lib_srcs" \
1634 -v lib_hdrs="$$sorted_lib_hdrs" \
1635 -v lib_rc="$$win32_lib_rc" \
1636 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1637 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1638 "$$awk_code" $(srcdir)/$(VC9_LIBTMPL) > $(VC9_LIBVCPROJ) || { exit 1; }; \
1640 echo "generating '$(VC9_SRCVCPROJ)'"; \
1641 awk -v proj_type=vcproj2 \
1642 -v src_srcs="$$sorted_src_srcs" \
1643 -v src_hdrs="$$sorted_src_hdrs" \
1644 -v src_rc="$$win32_src_rc" \
1645 -v src_x_srcs="$$sorted_src_x_srcs" \
1646 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1647 "$$awk_code" $(srcdir)/$(VC9_SRCTMPL) > $(VC9_SRCVCPROJ) || { exit 1; }; \
1649 echo "generating '$(VC10_LIBVCXPROJ)'"; \
1650 awk -v proj_type=vcxproj \
1651 -v lib_srcs="$$sorted_lib_srcs" \
1652 -v lib_hdrs="$$sorted_lib_hdrs" \
1653 -v lib_rc="$$win32_lib_rc" \
1654 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1655 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1656 "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \
1658 echo "generating '$(VC10_SRCVCXPROJ)'"; \
1659 awk -v proj_type=vcxproj \
1660 -v src_srcs="$$sorted_src_srcs" \
1661 -v src_hdrs="$$sorted_src_hdrs" \
1662 -v src_rc="$$win32_src_rc" \
1663 -v src_x_srcs="$$sorted_src_x_srcs" \
1664 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1665 "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \
1667 echo "generating '$(VC11_LIBVCXPROJ)'"; \
1668 awk -v proj_type=vcxproj \
1669 -v lib_srcs="$$sorted_lib_srcs" \
1670 -v lib_hdrs="$$sorted_lib_hdrs" \
1671 -v lib_rc="$$win32_lib_rc" \
1672 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1673 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1674 "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \
1676 echo "generating '$(VC11_SRCVCXPROJ)'"; \
1677 awk -v proj_type=vcxproj \
1678 -v src_srcs="$$sorted_src_srcs" \
1679 -v src_hdrs="$$sorted_src_hdrs" \
1680 -v src_rc="$$win32_src_rc" \
1681 -v src_x_srcs="$$sorted_src_x_srcs" \
1682 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1683 "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \
1685 echo "generating '$(VC12_LIBVCXPROJ)'"; \
1686 awk -v proj_type=vcxproj \
1687 -v lib_srcs="$$sorted_lib_srcs" \
1688 -v lib_hdrs="$$sorted_lib_hdrs" \
1689 -v lib_rc="$$win32_lib_rc" \
1690 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1691 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1692 "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \
1694 echo "generating '$(VC12_SRCVCXPROJ)'"; \
1695 awk -v proj_type=vcxproj \
1696 -v src_srcs="$$sorted_src_srcs" \
1697 -v src_hdrs="$$sorted_src_hdrs" \
1698 -v src_rc="$$win32_src_rc" \
1699 -v src_x_srcs="$$sorted_src_x_srcs" \
1700 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1701 "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \
1703 echo "generating '$(VC14_LIBVCXPROJ)'"; \
1704 awk -v proj_type=vcxproj \
1705 -v lib_srcs="$$sorted_lib_srcs" \
1706 -v lib_hdrs="$$sorted_lib_hdrs" \
1707 -v lib_rc="$$win32_lib_rc" \
1708 -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
1709 -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
1710 "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \
1712 echo "generating '$(VC14_SRCVCXPROJ)'"; \
1713 awk -v proj_type=vcxproj \
1714 -v src_srcs="$$sorted_src_srcs" \
1715 -v src_hdrs="$$sorted_src_hdrs" \
1716 -v src_rc="$$win32_src_rc" \
1717 -v src_x_srcs="$$sorted_src_x_srcs" \
1718 -v src_x_hdrs="$$sorted_src_x_hdrs" \
1719 "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; };)
1721 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1722 # Otherwise a system limit (for SysV at least) may be exceeded.