Replace "depends on PLATFORM_LINUX" with "select PLATFORM_LINUX"

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

diff --git a/Config.in b/Config.in
index 3361e73..94414db 100644 (file)
--- a/Config.in
+++ b/Config.in
@@ -385,7 +385,7 @@ config FEATURE_SUID_CONFIG_QUIET
 config SELINUX
        bool "Support NSA Security Enhanced Linux"
        default n
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Enable support for SELinux in applets ls, ps, and id. Also provide
          the option of compiling in SELinux applets.

diff --git a/console-tools/Config.src b/console-tools/Config.src
index cdb2680..c657044 100644 (file)
--- a/console-tools/Config.src
+++ b/console-tools/Config.src
@@ -10,7 +10,7 @@ INSERT
 config CHVT
        bool "chvt"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program is used to change to another terminal.
          Example: chvt 4 (change to terminal /dev/tty4)
@@ -18,7 +18,7 @@ config CHVT
 config FGCONSOLE
        bool "fgconsole"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program prints active (foreground) console number.
 
@@ -31,14 +31,14 @@ config CLEAR
 config DEALLOCVT
        bool "deallocvt"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program deallocates unused virtual consoles.
 
 config DUMPKMAP
        bool "dumpkmap"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program dumps the kernel's keyboard translation table to
          stdout, in binary format. You can then use loadkmap to load it.
@@ -46,21 +46,21 @@ config DUMPKMAP
 config KBD_MODE
        bool "kbd_mode"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program reports and sets keyboard mode.
 
 config LOADFONT
        bool "loadfont"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program loads a console font from standard input.
 
 config LOADKMAP
        bool "loadkmap"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program loads a keyboard translation table from
          standard input.
@@ -68,7 +68,7 @@ config LOADKMAP
 config OPENVT
        bool "openvt"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program is used to start a command on an unused
          virtual terminal.
@@ -100,7 +100,7 @@ config FEATURE_RESIZE_PRINT
 config SETCONSOLE
        bool "setconsole"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program redirects the system console to another device,
          like the current tty while logged in via telnet.
@@ -115,7 +115,7 @@ config FEATURE_SETCONSOLE_LONG_OPTIONS
 config SETFONT
        bool "setfont"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Allows to load console screen map. Useful for i18n.
 
@@ -137,7 +137,7 @@ config DEFAULT_SETFONT_DIR
 config SETKEYCODES
        bool "setkeycodes"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program loads entries into the kernel's scancode-to-keycode
          map, allowing unusual keyboards to generate usable keycodes.
@@ -145,14 +145,14 @@ config SETKEYCODES
 config SETLOGCONS
        bool "setlogcons"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This program redirects the output console of kernel messages.
 
 config SHOWKEY
        bool "showkey"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Shows keys pressed.
 

diff --git a/coreutils/Config.src b/coreutils/Config.src
index 1a044f9..1843e8b 100644 (file)
--- a/coreutils/Config.src
+++ b/coreutils/Config.src
@@ -591,7 +591,7 @@ config FEATURE_SPLIT_FANCY
 config STAT
        bool "stat"
        default y
-       depends on PLATFORM_LINUX # statfs()
+       select PLATFORM_LINUX # statfs()
        help
          display file or filesystem status.
 

diff --git a/coreutils/date.c b/coreutils/date.c
index 05b4f6e..db1b693 100644 (file)
--- a/coreutils/date.c
+++ b/coreutils/date.c
@@ -42,7 +42,8 @@
 //config:config FEATURE_DATE_NANO
 //config:      bool "Support %[num]N nanosecond format specifier"
 //config:      default n
-//config:      depends on DATE && PLATFORM_LINUX # syscall(__NR_clock_gettime)
+//config:      depends on DATE  # syscall(__NR_clock_gettime)
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Support %[num]N format specifier. Adds ~250 bytes of code.
 //config:

diff --git a/e2fsprogs/Config.src b/e2fsprogs/Config.src
index 6043e9b..743e1e1 100644 (file)
--- a/e2fsprogs/Config.src
+++ b/e2fsprogs/Config.src
@@ -33,7 +33,7 @@ config FSCK
 config LSATTR
        bool "lsattr"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          lsattr lists the file attributes on a second extended file system.
 

diff --git a/libbb/Config.src b/libbb/Config.src
index 18bdc51..a25af23 100644 (file)
--- a/libbb/Config.src
+++ b/libbb/Config.src
@@ -183,7 +183,7 @@ config FEATURE_SKIP_ROOTFS
 config MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).

diff --git a/miscutils/Config.src b/miscutils/Config.src
index b5866bb..6152914 100644 (file)
--- a/miscutils/Config.src
+++ b/miscutils/Config.src
@@ -10,7 +10,7 @@ INSERT
 config ADJTIMEX
        bool "adjtimex"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Adjtimex reads and optionally sets adjustment parameters for
          the Linux clock adjustment algorithm.
@@ -39,7 +39,7 @@ config FEATURE_COMPRESS_BBCONFIG
 config BEEP
        bool "beep"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The beep applets beeps in a given freq/Hz.
 
@@ -194,7 +194,7 @@ config FEATURE_DC_LIBM
 config DEVFSD
        bool "devfsd (obsolete)"
        default n
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        select FEATURE_SYSLOG
        help
          This is deprecated and should NOT be used anymore.
@@ -238,7 +238,7 @@ config DEVFSD_VERBOSE
 config FEATURE_DEVFS
        bool "Use devfs names for all devices (obsolete)"
        default n
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This is obsolete and should NOT be used anymore.
          Use linux >= 2.6 (optionally with hotplug) and mdev instead!
@@ -258,7 +258,7 @@ config DEVMEM
 config EJECT
        bool "eject"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Used to eject cdroms. (defaults to /dev/cdrom)
 
@@ -273,7 +273,7 @@ config FEATURE_EJECT_SCSI
 config FBSPLASH
        bool "fbsplash"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Shows splash image and progress bar on framebuffer device.
          Can be used during boot phase of an embedded device. ~2kb.
@@ -323,7 +323,7 @@ config FLASH_ERASEALL
 config IONICE
        bool "ionice"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Set/set program io scheduling class and priority
          Requires kernel >= 2.6.13
@@ -429,7 +429,7 @@ config FEATURE_LESS_LINENUMS
 config HDPARM
        bool "hdparm"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Get/Set hard drive parameters. Primarily intended for ATA
          drives. Adds about 13k (or around 30k if you enable the
@@ -546,7 +546,7 @@ config MT
 config RAIDAUTORUN
        bool "raidautorun"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          raidautorun tells the kernel md driver to
          search and start RAID arrays.
@@ -554,7 +554,8 @@ config RAIDAUTORUN
 config READAHEAD
        bool "readahead"
        default y
-       depends on LFS && PLATFORM_LINUX
+       depends on LFS
+       select PLATFORM_LINUX
        help
          Preload the files listed on the command line into RAM cache so that
          subsequent reads on these files will not block on disk I/O.
@@ -571,7 +572,7 @@ config READAHEAD
 config RFKILL
        bool "rfkill"
        default n  # doesn't build on Ubuntu 9.04
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Enable/disable wireless devices.
 
@@ -593,7 +594,7 @@ config RUNLEVEL
 config RX
        bool "rx"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Receive files using the Xmodem protocol.
 
@@ -666,7 +667,7 @@ config WALL
 config WATCHDOG
        bool "watchdog"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The watchdog utility is used with hardware or software watchdog
          device drivers. It opens the specified watchdog device special file

diff --git a/miscutils/conspy.c b/miscutils/conspy.c
index 721eb6d..1fdb2fb 100644 (file)
--- a/miscutils/conspy.c
+++ b/miscutils/conspy.c
@@ -17,7 +17,7 @@
 //config:config CONSPY
 //config:      bool "conspy"
 //config:      default n
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        A text-mode VNC like program for Linux virtual terminals.
 //config:        example:  conspy NUM      shared access to console num

diff --git a/miscutils/nandwrite.c b/miscutils/nandwrite.c
index c5e2fb8..c7fbe7d 100644 (file)
--- a/miscutils/nandwrite.c
+++ b/miscutils/nandwrite.c
@@ -17,14 +17,14 @@
 //config:config NANDWRITE
 //config:      bool "nandwrite"
 //config:      default n
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Write to the specified MTD device, with bad blocks awareness
 //config:
 //config:config NANDDUMP
 //config:      bool "nanddump"
 //config:      default n
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Dump the content of raw NAND chip
 

diff --git a/miscutils/ubi_attach_detach.c b/miscutils/ubi_attach_detach.c
index fef9250..9007f8c 100644 (file)
--- a/miscutils/ubi_attach_detach.c
+++ b/miscutils/ubi_attach_detach.c
@@ -6,35 +6,35 @@
 //config:config UBIATTACH
 //config:      bool "ubiattach"
 //config:      default y
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Attach MTD device to an UBI device.
 //config:
 //config:config UBIDETACH
 //config:      bool "ubidetach"
 //config:      default y
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Detach MTD device from an UBI device.
 //config:
 //config:config UBIMKVOL
 //config:      bool "ubimkvol"
 //config:      default y
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Create a UBI volume.
 //config:
 //config:config UBIRMVOL
 //config:      bool "ubirmvol"
 //config:      default y
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Delete a UBI volume.
 //config:
 //config:config UBIRSVOL
 //config:      bool "ubirsvol"
 //config:      default y
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        Resize a UBI volume.
 

diff --git a/modutils/Config.src b/modutils/Config.src
index 4191d29..449ac65 100644 (file)
--- a/modutils/Config.src
+++ b/modutils/Config.src
@@ -4,13 +4,13 @@
 #
 
 menu "Linux Module Utilities"
-depends on PLATFORM_LINUX
 
 INSERT
 
 config MODPROBE_SMALL
        bool "Simplified modutils"
        default y
+       select PLATFORM_LINUX
        help
          Simplified modutils.
 
@@ -45,6 +45,7 @@ config FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE
        bool "Accept module options on modprobe command line"
        default y
        depends on MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          Allow insmod and modprobe take module options from command line.
 
@@ -59,6 +60,7 @@ config INSMOD
        bool "insmod"
        default n
        depends on !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          insmod is used to load specified modules in the running kernel.
 
@@ -66,6 +68,7 @@ config RMMOD
        bool "rmmod"
        default n
        depends on !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          rmmod is used to unload specified modules from the kernel.
 
@@ -73,6 +76,7 @@ config LSMOD
        bool "lsmod"
        default n
        depends on !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          lsmod is used to display a list of loaded modules.
 
@@ -80,6 +84,7 @@ config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
        bool "Pretty output"
        default n
        depends on LSMOD
+       select PLATFORM_LINUX
        help
          This option makes output format of lsmod adjusted to
          the format of module-init-tools for Linux kernel 2.6.
@@ -89,6 +94,7 @@ config MODPROBE
        bool "modprobe"
        default n
        depends on !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          Handle the loading of modules, and their dependencies on a high
          level.
@@ -97,6 +103,7 @@ config FEATURE_MODPROBE_BLACKLIST
        bool "Blacklist support"
        default n
        depends on MODPROBE
+       select PLATFORM_LINUX
        help
          Say 'y' here to enable support for the 'blacklist' command in
          modprobe.conf. This prevents the alias resolver to resolve
@@ -108,6 +115,7 @@ config DEPMOD
        bool "depmod"
        default n
        depends on !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          depmod generates modules.dep (and potentially modules.alias
          and modules.symbols) that contain dependency information
@@ -119,6 +127,7 @@ config FEATURE_2_4_MODULES
        bool "Support version 2.2/2.4 Linux kernels"
        default n
        depends on INSMOD || RMMOD || LSMOD
+       select PLATFORM_LINUX
        help
          Support module loading for 2.2.x and 2.4.x Linux kernels.
          This increases size considerably. Say N unless you plan
@@ -128,6 +137,7 @@ config FEATURE_INSMOD_TRY_MMAP
        bool "Try to load module from a mmap'ed area"
        default n
        depends on INSMOD || MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          This option causes module loading code to try to mmap
          module first. If it does not work (for example,
@@ -144,6 +154,7 @@ config FEATURE_INSMOD_VERSION_CHECKING
        bool "Enable module version checking"
        default n
        depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
+       select PLATFORM_LINUX
        help
          Support checking of versions for modules. This is used to
          ensure that the kernel and module are made for each other.
@@ -152,6 +163,7 @@ config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
        bool "Add module symbols to kernel symbol table"
        default n
        depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
+       select PLATFORM_LINUX
        help
          By adding module symbols to the kernel symbol table, Oops messages
          occuring within kernel modules can be properly debugged. By enabling
@@ -163,6 +175,7 @@ config FEATURE_INSMOD_LOADINKMEM
        bool "In kernel memory optimization (uClinux only)"
        default n
        depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
+       select PLATFORM_LINUX
        help
          This is a special uClinux only memory optimization that lets insmod
          load the specified kernel module directly into kernel space, reducing
@@ -173,6 +186,7 @@ config FEATURE_INSMOD_LOAD_MAP
        bool "Enable insmod load map (-m) option"
        default n
        depends on FEATURE_2_4_MODULES && INSMOD
+       select PLATFORM_LINUX
        help
          Enabling this, one would be able to get a load map
          output on stdout. This makes kernel module debugging
@@ -184,6 +198,7 @@ config FEATURE_INSMOD_LOAD_MAP_FULL
        bool "Symbols in load map"
        default y
        depends on FEATURE_INSMOD_LOAD_MAP && !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          Without this option, -m will only output section
          load map. With this option, -m will also output
@@ -193,6 +208,7 @@ config FEATURE_CHECK_TAINTED_MODULE
        bool "Support tainted module checking with new kernels"
        default y
        depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL
+       select PLATFORM_LINUX
        help
          Support checking for tainted modules. These are usually binary
          only modules that will make the linux-kernel list ignore your
@@ -203,6 +219,7 @@ config FEATURE_MODUTILS_ALIAS
        bool "Support for module.aliases file"
        default y
        depends on DEPMOD || MODPROBE
+       select PLATFORM_LINUX
        help
          Generate and parse modules.alias containing aliases for bus
          identifiers:
@@ -219,6 +236,7 @@ config FEATURE_MODUTILS_SYMBOLS
        bool "Support for module.symbols file"
        default y
        depends on DEPMOD || MODPROBE
+       select PLATFORM_LINUX
        help
          Generate and parse modules.symbols containing aliases for
          symbol_request() kernel calls, such as:

diff --git a/networking/Config.src b/networking/Config.src
index 274fcae..06930f4 100644 (file)
--- a/networking/Config.src
+++ b/networking/Config.src
@@ -51,21 +51,21 @@ config VERBOSE_RESOLUTION_ERRORS
 config ARP
        bool "arp"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Manipulate the system ARP cache.
 
 config ARPING
        bool "arping"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Ping hosts by ARP packets.
 
 config BRCTL
        bool "brctl"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Manage ethernet bridges.
          Supports addbr/delbr and addif/delif.
@@ -98,7 +98,7 @@ config DNSD
 config ETHER_WAKE
        bool "ether-wake"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Send a magic packet to wake up sleeping machines.
 
@@ -281,7 +281,7 @@ config FEATURE_HTTPD_GZIP
 config IFCONFIG
        bool "ifconfig"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Ifconfig is used to configure the kernel-resident network interfaces.
 
@@ -329,7 +329,7 @@ config FEATURE_IFCONFIG_BROADCAST_PLUS
 config IFENSLAVE
        bool "ifenslave"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Userspace application to bind several interfaces
          to a logical interface (use with kernel bonding driver).
@@ -337,7 +337,7 @@ config IFENSLAVE
 config IFPLUGD
        bool "ifplugd"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Network interface plug detection daemon.
 
@@ -379,7 +379,8 @@ config FEATURE_IFUPDOWN_IP
 config FEATURE_IFUPDOWN_IP_BUILTIN
        bool "Use busybox ip applet"
        default y
-       depends on FEATURE_IFUPDOWN_IP && PLATFORM_LINUX
+       depends on FEATURE_IFUPDOWN_IP
+       select PLATFORM_LINUX
        select IP
        select FEATURE_IP_ADDRESS
        select FEATURE_IP_LINK
@@ -498,7 +499,7 @@ config FEATURE_INETD_RPC
 config IP
        bool "ip"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The "ip" applet is a TCP/IP interface configuration and routing
          utility. You generally don't need "ip" to use busybox with
@@ -614,7 +615,7 @@ config FEATURE_IPCALC_LONG_OPTIONS
 config NAMEIF
        bool "nameif"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        select FEATURE_SYSLOG
        help
          nameif is used to rename network interface by its MAC address.
@@ -643,7 +644,7 @@ config FEATURE_NAMEIF_EXTENDED
 config NETSTAT
        bool "netstat"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          netstat prints information about the Linux networking subsystem.
 
@@ -672,7 +673,7 @@ config NSLOOKUP
 config NTPD
        bool "ntpd"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The NTP client/server daemon.
 
@@ -693,14 +694,14 @@ config PSCAN
 config ROUTE
        bool "route"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Route displays or manipulates the kernel's IP routing tables.
 
 config SLATTACH
        bool "slattach"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          slattach is a small utility to attach network interfaces to serial
          lines.
@@ -887,7 +888,7 @@ config TFTP_DEBUG
 config TRACEROUTE
        bool "traceroute"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Utility to trace the route of IP packets.
 
@@ -924,7 +925,7 @@ config FEATURE_TRACEROUTE_USE_ICMP
 config TUNCTL
        bool "tunctl"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          tunctl creates or deletes tun devices.
 
@@ -957,7 +958,7 @@ config UDPSVD
 config VCONFIG
        bool "vconfig"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Creates, removes, and configures VLAN interfaces
 
@@ -1004,7 +1005,7 @@ config FEATURE_WGET_TIMEOUT
 config ZCIP
        bool "zcip"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        select FEATURE_SYSLOG
        help
          ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.

diff --git a/networking/ping.c b/networking/ping.c
index c2ff42e..7a9c2d1 100644 (file)
--- a/networking/ping.c
+++ b/networking/ping.c
@@ -32,7 +32,7 @@
 //config:config PING
 //config:      bool "ping"
 //config:      default y
-//config:      depends on PLATFORM_LINUX
+//config:      select PLATFORM_LINUX
 //config:      help
 //config:        ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
 //config:        elicit an ICMP ECHO_RESPONSE from a host or gateway.

diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src
index 750a53a..9cd8cbb 100644 (file)
--- a/networking/udhcp/Config.src
+++ b/networking/udhcp/Config.src
@@ -8,7 +8,7 @@ INSERT
 config UDHCPD
        bool "udhcp server (udhcpd)"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          udhcpd is a DHCP server geared primarily toward embedded systems,
          while striving to be fully functional and RFC compliant.
@@ -66,7 +66,7 @@ config DHCPD_LEASES_FILE
 config UDHCPC
        bool "udhcp client (udhcpc)"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          udhcpc is a DHCP client geared primarily toward embedded systems,
          while striving to be fully functional and RFC compliant.

diff --git a/procps/Config.src b/procps/Config.src
index cf664ee..3e7df0b 100644 (file)
--- a/procps/Config.src
+++ b/procps/Config.src
@@ -10,7 +10,7 @@ INSERT
 config FREE
        bool "free"
        default y
-       depends on PLATFORM_LINUX #sysinfo()
+       select PLATFORM_LINUX #sysinfo()
        help
          free displays the total amount of free and used physical and swap
          memory in the system, as well as the buffers used by the kernel.
@@ -99,7 +99,8 @@ config FEATURE_PS_WIDE
 config FEATURE_PS_TIME
        bool "Enable time and elapsed time output"
        default y
-       depends on PS && DESKTOP && PLATFORM_LINUX #sysinfo()
+       depends on PS && DESKTOP
+       select PLATFORM_LINUX
        help
          Support -o time and -o etime output specifiers.
 
@@ -196,7 +197,7 @@ config FEATURE_SHOW_THREADS
 config UPTIME
        bool "uptime"
        default y
-       depends on PLATFORM_LINUX #sysinfo()
+       select PLATFORM_LINUX #sysinfo()
        help
          uptime gives a one line display of the current time, how long
          the system has been running, how many users are currently logged

diff --git a/sysklogd/Config.src b/sysklogd/Config.src
index 1e59872..d62dc5f 100644 (file)
--- a/sysklogd/Config.src
+++ b/sysklogd/Config.src
@@ -119,7 +119,8 @@ config KLOGD
 config FEATURE_KLOGD_KLOGCTL
        bool "Use the klogctl() interface"
        default y
-       depends on KLOGD && PLATFORM_LINUX
+       depends on KLOGD
+       select PLATFORM_LINUX
        help
          The klogd applet supports two interfaces for reading
          kernel messages. Linux provides the klogctl() interface

diff --git a/util-linux/Config.src b/util-linux/Config.src
index 941a47f..90606bc 100644 (file)
--- a/util-linux/Config.src
+++ b/util-linux/Config.src
@@ -10,7 +10,7 @@ INSERT
 config ACPID
        bool "acpid"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          acpid listens to ACPI events coming either in textual form from
          /proc/acpi/event (though it is marked deprecated it is still widely
@@ -33,7 +33,7 @@ config FEATURE_ACPID_COMPAT
 config BLKID
        bool "blkid"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        select VOLUMEID
        help
          Lists labels and UUIDs of all filesystems.
@@ -50,7 +50,7 @@ config FEATURE_BLKID_TYPE
 config DMESG
        bool "dmesg"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          dmesg is used to examine or control the kernel ring buffer. When the
          Linux kernel prints messages to the system log, they are stored in
@@ -84,7 +84,7 @@ config FEATURE_DMESG_PRETTY
 config FBSET
        bool "fbset"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          fbset is used to show or change the settings of a Linux frame buffer
          device. The frame buffer device provides a simple and unique
@@ -113,7 +113,7 @@ config FEATURE_FBSET_READMODE
 config FDFLUSH
        bool "fdflush"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          fdflush is only needed when changing media on slightly-broken
          removable media drives. It is used to make Linux believe that a
@@ -126,14 +126,14 @@ config FDFLUSH
 config FDFORMAT
        bool "fdformat"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          fdformat is used to low-level format a floppy disk.
 
 config FDISK
        bool "fdisk"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The fdisk utility is used to divide hard disks into one or more
          logical disks, which are generally called partitions. This utility
@@ -209,7 +209,7 @@ config FEATURE_FDISK_ADVANCED
 config FINDFS
        bool "findfs"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        select VOLUMEID
        help
          Prints the name of a filesystem with given label or UUID.
@@ -225,7 +225,7 @@ config FLOCK
 config FREERAMDISK
        bool "freeramdisk"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Linux allows you to create ramdisks. This utility allows you to
          delete them and completely free all memory that was used for the
@@ -248,14 +248,14 @@ config FSCK_MINIX
 config MKFS_EXT2
        bool "mkfs_ext2"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Utility to create EXT2 filesystems.
 
 config MKFS_MINIX
        bool "mkfs_minix"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The minix filesystem is a nice, small, compact, read-write filesystem
          with little overhead. If you wish to be able to create minix
@@ -273,7 +273,7 @@ config FEATURE_MINIX2
 config MKFS_REISER
        bool "mkfs_reiser"
        default n
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Utility to create ReiserFS filesystems.
          Note: this applet needs a lot of testing and polishing.
@@ -281,7 +281,7 @@ config MKFS_REISER
 config MKFS_VFAT
        bool "mkfs_vfat"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Utility to create FAT32 filesystems.
 
@@ -330,7 +330,7 @@ config HD
 config HWCLOCK
        bool "hwclock"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The hwclock utility is used to read and set the hardware clock
          on a system. This is primarily used to set the current time on
@@ -369,7 +369,7 @@ config IPCRM
 config IPCS
        bool "ipcs"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The ipcs utility is used to provide information on the currently
          allocated System V interprocess (IPC) objects in the system.
@@ -377,7 +377,7 @@ config IPCS
 config LOSETUP
        bool "losetup"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          losetup is used to associate or detach a loop device with a regular
          file or block device, and to query the status of a loop device. This
@@ -386,7 +386,7 @@ config LOSETUP
 config LSPCI
        bool "lspci"
        default y
-       #depends on PLATFORM_LINUX
+       #select PLATFORM_LINUX
        help
          lspci is a utility for displaying information about PCI buses in the
          system and devices connected to them.
@@ -396,7 +396,7 @@ config LSPCI
 config LSUSB
        bool "lsusb"
        default y
-       #depends on PLATFORM_LINUX
+       #select PLATFORM_LINUX
        help
          lsusb is a utility for displaying information about USB buses in the
          system and devices connected to them.
@@ -406,7 +406,7 @@ config LSUSB
 config MDEV
        bool "mdev"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          mdev is a mini-udev implementation for dynamically creating device
          nodes in the /dev directory.
@@ -494,7 +494,7 @@ config MORE
 config MOUNT
        bool "mount"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          All files and filesystems in Unix are arranged into one big directory
          tree. The 'mount' utility is used to graft a filesystem onto a
@@ -577,7 +577,7 @@ config FEATURE_MOUNT_FSTAB
 config PIVOT_ROOT
        bool "pivot_root"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The pivot_root utility swaps the mount points for the root filesystem
          with some other mounted filesystem. This allows you to do all sorts
@@ -605,14 +605,14 @@ config RDEV
 config READPROFILE
        bool "readprofile"
        default y
-       #depends on PLATFORM_LINUX
+       #select PLATFORM_LINUX
        help
          This allows you to parse /proc/profile for basic profiling.
 
 config RTCWAKE
        bool "rtcwake"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          Enter a system sleep state until specified wakeup time.
 
@@ -632,7 +632,7 @@ config SCRIPTREPLAY
 config SETARCH
        bool "setarch"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The linux32 utility is used to create a 32bit environment for the
          specified program (usually a shell). It only makes sense to have
@@ -642,7 +642,7 @@ config SETARCH
 config SWAPONOFF
        bool "swaponoff"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          This option enables both the 'swapon' and the 'swapoff' utilities.
          Once you have created some swap space using 'mkswap', you also need
@@ -661,7 +661,7 @@ config FEATURE_SWAPON_PRI
 config SWITCH_ROOT
        bool "switch_root"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          The switch_root utility is used from initramfs to select a new
          root device. Under initramfs, you have to use this instead of
@@ -681,7 +681,7 @@ config SWITCH_ROOT
 config UMOUNT
        bool "umount"
        default y
-       depends on PLATFORM_LINUX
+       select PLATFORM_LINUX
        help
          When you want to remove a mounted filesystem from its current mount
          point, for example when you are shutting down the system, the