sed is used to perform text transformations on a file
or input from a pipeline.
-config VI
- bool "vi"
- default y
- help
- 'vi' is a text editor. More specifically, it is the One True
- text editor <grin>. It does, however, have a rather steep
- learning curve. If you are not already comfortable with 'vi'
- you may wish to use something else.
-
-config FEATURE_VI_MAX_LEN
- int "Maximum screen width in vi"
- range 256 16384
- default 4096
- depends on VI
- help
- Contrary to what you may think, this is not eating much.
- Make it smaller than 4k only if you are very limited on memory.
-
-config FEATURE_VI_8BIT
- bool "Allow vi to display 8-bit chars (otherwise shows dots)"
- default n
- depends on VI
- help
- If your terminal can display characters with high bit set,
- you may want to enable this. Note: vi is not Unicode-capable.
- If your terminal combines several 8-bit bytes into one character
- (as in Unicode mode), this will not work properly.
-
-config FEATURE_VI_COLON
- bool "Enable \":\" colon commands (no \"ex\" mode)"
- default y
- depends on VI
- help
- Enable a limited set of colon commands for vi. This does not
- provide an "ex" mode.
-
-config FEATURE_VI_YANKMARK
- bool "Enable yank/put commands and mark cmds"
- default y
- depends on VI
- help
- This will enable you to use yank and put, as well as mark in
- busybox vi.
-
-config FEATURE_VI_SEARCH
- bool "Enable search and replace cmds"
- default y
- depends on VI
- help
- Select this if you wish to be able to do search and replace in
- busybox vi.
-
-config FEATURE_VI_USE_SIGNALS
- bool "Catch signals"
- default y
- depends on VI
- help
- Selecting this option will make busybox vi signal aware. This will
- make busybox vi support SIGWINCH to deal with Window Changes, catch
- Ctrl-Z and Ctrl-C and alarms.
-
-config FEATURE_VI_DOT_CMD
- bool "Remember previous cmd and \".\" cmd"
- default y
- depends on VI
- help
- Make busybox vi remember the last command and be able to repeat it.
-
-config FEATURE_VI_READONLY
- bool "Enable -R option and \"view\" mode"
- default y
- depends on VI
- help
- Enable the read-only command line option, which allows the user to
- open a file in read-only mode.
-
-config FEATURE_VI_SETOPTS
- bool "Enable set-able options, ai ic showmatch"
- default y
- depends on VI
- help
- Enable the editor to set some (ai, ic, showmatch) options.
-
-config FEATURE_VI_SET
- bool "Support for :set"
- default y
- depends on VI
- help
- Support for ":set".
-
-config FEATURE_VI_WIN_RESIZE
- bool "Handle window resize"
- default y
- depends on VI
- help
- Make busybox vi behave nicely with terminals that get resized.
-
-config FEATURE_VI_ASK_TERMINAL
- bool "Use 'tell me cursor position' ESC sequence to measure window"
- default y
- depends on VI
- help
- If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
- this option makes vi perform a last-ditch effort to find it:
- vi positions cursor to 999,999 and asks terminal to report real
- cursor position using "ESC [ 6 n" escape sequence, then reads stdin.
-
- This is not clean but helps a lot on serial lines and such.
-
-config FEATURE_VI_OPTIMIZE_CURSOR
- bool "Optimize cursor movement"
- default y
- depends on VI
- help
- This will make the cursor movement faster, but requires more memory
- and it makes the applet a tiny bit larger.
-
config FEATURE_ALLOW_EXEC
bool "Allow vi and awk to execute shell commands"
default y
* An "ex" line oriented mode- maybe using "cmdedit"
*/
+//config:config VI
+//config: bool "vi"
+//config: default y
+//config: help
+//config: 'vi' is a text editor. More specifically, it is the One True
+//config: text editor <grin>. It does, however, have a rather steep
+//config: learning curve. If you are not already comfortable with 'vi'
+//config: you may wish to use something else.
+//config:
+//config:config FEATURE_VI_MAX_LEN
+//config: int "Maximum screen width in vi"
+//config: range 256 16384
+//config: default 4096
+//config: depends on VI
+//config: help
+//config: Contrary to what you may think, this is not eating much.
+//config: Make it smaller than 4k only if you are very limited on memory.
+//config:
+//config:config FEATURE_VI_8BIT
+//config: bool "Allow vi to display 8-bit chars (otherwise shows dots)"
+//config: default n
+//config: depends on VI
+//config: help
+//config: If your terminal can display characters with high bit set,
+//config: you may want to enable this. Note: vi is not Unicode-capable.
+//config: If your terminal combines several 8-bit bytes into one character
+//config: (as in Unicode mode), this will not work properly.
+//config:
+//config:config FEATURE_VI_COLON
+//config: bool "Enable \":\" colon commands (no \"ex\" mode)"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Enable a limited set of colon commands for vi. This does not
+//config: provide an "ex" mode.
+//config:
+//config:config FEATURE_VI_YANKMARK
+//config: bool "Enable yank/put commands and mark cmds"
+//config: default y
+//config: depends on VI
+//config: help
+//config: This will enable you to use yank and put, as well as mark in
+//config: busybox vi.
+//config:
+//config:config FEATURE_VI_SEARCH
+//config: bool "Enable search and replace cmds"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Select this if you wish to be able to do search and replace in
+//config: busybox vi.
+//config:
+//config:config FEATURE_VI_REGEX_SEARCH
+//config: bool "Enable regex in search and replace"
+//config: default n # Uses GNU regex, which may be unavailable. FIXME
+//config: depends on FEATURE_VI_SEARCH
+//config: help
+//config: Use extended regex search.
+//config:
+//config:config FEATURE_VI_USE_SIGNALS
+//config: bool "Catch signals"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Selecting this option will make busybox vi signal aware. This will
+//config: make busybox vi support SIGWINCH to deal with Window Changes, catch
+//config: Ctrl-Z and Ctrl-C and alarms.
+//config:
+//config:config FEATURE_VI_DOT_CMD
+//config: bool "Remember previous cmd and \".\" cmd"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Make busybox vi remember the last command and be able to repeat it.
+//config:
+//config:config FEATURE_VI_READONLY
+//config: bool "Enable -R option and \"view\" mode"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Enable the read-only command line option, which allows the user to
+//config: open a file in read-only mode.
+//config:
+//config:config FEATURE_VI_SETOPTS
+//config: bool "Enable set-able options, ai ic showmatch"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Enable the editor to set some (ai, ic, showmatch) options.
+//config:
+//config:config FEATURE_VI_SET
+//config: bool "Support for :set"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Support for ":set".
+//config:
+//config:config FEATURE_VI_WIN_RESIZE
+//config: bool "Handle window resize"
+//config: default y
+//config: depends on VI
+//config: help
+//config: Make busybox vi behave nicely with terminals that get resized.
+//config:
+//config:config FEATURE_VI_ASK_TERMINAL
+//config: bool "Use 'tell me cursor position' ESC sequence to measure window"
+//config: default y
+//config: depends on VI
+//config: help
+//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+//config: this option makes vi perform a last-ditch effort to find it:
+//config: vi positions cursor to 999,999 and asks terminal to report real
+//config: cursor position using "ESC [ 6 n" escape sequence, then reads stdin.
+//config:
+//config: This is not clean but helps a lot on serial lines and such.
+//config:
+//config:config FEATURE_VI_OPTIMIZE_CURSOR
+//config: bool "Optimize cursor movement"
+//config: default y
+//config: depends on VI
+//config: help
+//config: This will make the cursor movement faster, but requires more memory
+//config: and it makes the applet a tiny bit larger.
+
+//applet:IF_VI(APPLET(vi, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_VI) += vi.o
+
//usage:#define vi_trivial_usage
//usage: "[OPTIONS] [FILE]..."
//usage:#define vi_full_usage "\n\n"
//usage: )
//usage: "\n -H Short help regarding available features"
+#include <regex.h>
#include "libbb.h"
/* the CRASHME code is unmaintained, and doesn't currently build */
#if ENABLE_FEATURE_VI_SEARCH
static char *char_search(char *, const char *, int, int); // search for pattern starting at p
-static int mycmp(const char *, const char *, int); // string cmp based in "ignorecase"
#endif
#if ENABLE_FEATURE_VI_COLON
static char *get_one_address(char *, int *); // get colon addr, if present
}
#if ENABLE_FEATURE_VI_SEARCH
-static int mycmp(const char *s1, const char *s2, int len)
-{
- if (ENABLE_FEATURE_VI_SETOPTS && ignorecase) {
- return strncasecmp(s1, s2, len);
- }
- return strncmp(s1, s2, len);
-}
+
+# if ENABLE_FEATURE_VI_REGEX_SEARCH
// search for pattern starting at p
static char *char_search(char *p, const char *pat, int dir, int range)
{
-#ifndef REGEX_SEARCH
- char *start, *stop;
- int len;
-
- len = strlen(pat);
- if (dir == FORWARD) {
- stop = end - 1; // assume range is p - end-1
- if (range == LIMITED)
- stop = next_line(p); // range is to next line
- for (start = p; start < stop; start++) {
- if (mycmp(start, pat, len) == 0) {
- return start;
- }
- }
- } else if (dir == BACK) {
- stop = text; // assume range is text - p
- if (range == LIMITED)
- stop = prev_line(p); // range is to prev line
- for (start = p - len; start >= stop; start--) {
- if (mycmp(start, pat, len) == 0) {
- return start;
- }
- }
- }
- // pattern not found
- return NULL;
-#else /* REGEX_SEARCH */
char *q;
struct re_pattern_buffer preg;
int i;
- int size, range;
+ int size;
re_syntax_options = RE_SYNTAX_POSIX_EXTENDED;
preg.translate = 0;
// RANGE could be negative if we are searching backwards
range = q - p;
- q = re_compile_pattern(pat, strlen(pat), &preg);
+ q = (char *)re_compile_pattern(pat, strlen(pat), (struct re_pattern_buffer *)&preg);
if (q != 0) {
// The pattern was not compiled
status_line_bold("bad search pattern: \"%s\": %s", pat, q);
p = p - i;
}
return p;
-#endif /* REGEX_SEARCH */
}
+
+# else
+
+# if ENABLE_FEATURE_VI_SETOPTS
+static int mycmp(const char *s1, const char *s2, int len)
+{
+ if (ignorecase) {
+ return strncasecmp(s1, s2, len);
+ }
+ return strncmp(s1, s2, len);
+}
+# else
+# define mycmp strncmp
+# endif
+
+static char *char_search(char *p, const char *pat, int dir, int range)
+{
+ char *start, *stop;
+ int len;
+
+ len = strlen(pat);
+ if (dir == FORWARD) {
+ stop = end - 1; // assume range is p - end-1
+ if (range == LIMITED)
+ stop = next_line(p); // range is to next line
+ for (start = p; start < stop; start++) {
+ if (mycmp(start, pat, len) == 0) {
+ return start;
+ }
+ }
+ } else if (dir == BACK) {
+ stop = text; // assume range is text - p
+ if (range == LIMITED)
+ stop = prev_line(p); // range is to prev line
+ for (start = p - len; start >= stop; start--) {
+ if (mycmp(start, pat, len) == 0) {
+ return start;
+ }
+ }
+ }
+ // pattern not found
+ return NULL;
+}
+
+# endif
+
#endif /* FEATURE_VI_SEARCH */
static char *char_insert(char *p, char c) // insert the char c at 'p'
"\n\tNamed buffers with \"x"
#endif
#if ENABLE_FEATURE_VI_READONLY
- "\n\tReadonly if vi is called as \"view\""
- "\n\tReadonly with -R command line arg"
+ //not implemented: "\n\tReadonly if vi is called as \"view\""
+ //redundant: usage text says this too: "\n\tReadonly with -R command line arg"
#endif
#if ENABLE_FEATURE_VI_SET
"\n\tSome colon mode commands with \':\'"
projects / platform / upstream / busybox.git / commitdiff