silent_cmd_doc =
disp_doc = $($(quiet)cmd_doc)
+# sed adds newlines after "Options:" etc,
+# this is needed in order to get good BusyBox.{1,txt,html}
docs/busybox.pod: $(srctree)/docs/busybox_header.pod \
$(srctree)/include/usage.h \
$(srctree)/docs/busybox_footer.pod \
- $(srctree)/docs/autodocifier.pl
+ applets/usage_pod
$(disp_doc)
$(Q)-mkdir -p docs
- $(Q)-( cat $(srctree)/docs/busybox_header.pod ; \
- $(srctree)/docs/autodocifier.pl $(srctree)/include/usage.h ; \
- cat $(srctree)/docs/busybox_footer.pod ; ) > docs/busybox.pod
+ $(Q)-( \
+ cat $(srctree)/docs/busybox_header.pod; \
+ applets/usage_pod | sed 's/^[A-Za-z][A-Za-z ]*[a-z]:$$/&\n/'; \
+ cat $(srctree)/docs/busybox_footer.pod; \
+ ) > docs/busybox.pod
docs/BusyBox.txt: docs/busybox.pod
$(disp_doc)
docs/BusyBox.1: docs/busybox.pod
$(disp_doc)
$(Q)-mkdir -p docs
- $(Q)-pod2man --center=BusyBox --release="version $(VERSION)" \
- $< > $@
+ $(Q)-pod2man --center=BusyBox --release="version $(VERSION)" $< > $@
docs/BusyBox.html: docs/busybox.net/BusyBox.html
$(disp_doc)
docs/busybox.net/BusyBox.html: docs/busybox.pod
$(Q)-mkdir -p docs/busybox.net
- $(Q)-pod2html --noindex $< > \
- docs/busybox.net/BusyBox.html
+ $(Q)-pod2html --noindex $< > $@
$(Q)-rm -f pod2htm*
# documentation, cross-reference
/* Keep in sync with include/busybox.h! */
- puts("/* This is a generated file, don't edit */\n");
+ printf("/* This is a generated file, don't edit */\n\n");
printf("#define NUM_APPLETS %u\n", NUM_APPLETS);
if (NUM_APPLETS == 1) {
printf("#define SINGLE_APPLET_STR \"%s\"\n", applets[0].name);
printf("#define SINGLE_APPLET_MAIN %s_main\n", applets[0].name);
}
+ printf("\n");
- puts("\nconst char applet_names[] ALIGN1 = \"\"");
+ printf("const char applet_names[] ALIGN1 = \"\"\n");
for (i = 0; i < NUM_APPLETS; i++) {
printf("\"%s\" \"\\0\"\n", applets[i].name);
if (MAX_APPLET_NAME_LEN < strlen(applets[i].name))
MAX_APPLET_NAME_LEN = strlen(applets[i].name);
}
- puts(";");
+ printf(";\n\n");
- puts("\nint (*const applet_main[])(int argc, char **argv) = {");
+ printf("#ifndef SKIP_applet_main\n");
+ printf("int (*const applet_main[])(int argc, char **argv) = {\n");
for (i = 0; i < NUM_APPLETS; i++) {
printf("%s_main,\n", applets[i].main);
}
- puts("};");
+ printf("};\n");
+ printf("#endif\n\n");
- puts("const uint16_t applet_nameofs[] ALIGN2 = {");
+ printf("const uint16_t applet_nameofs[] ALIGN2 = {\n");
for (i = 0; i < NUM_APPLETS; i++) {
printf("0x%04x,\n",
offset[i]
#endif
);
}
- puts("};");
+ printf("};\n\n");
#if ENABLE_FEATURE_INSTALLER
- puts("const uint8_t applet_install_loc[] ALIGN1 = {");
+ printf("const uint8_t applet_install_loc[] ALIGN1 = {\n");
i = 0;
while (i < NUM_APPLETS) {
int v = applets[i].install_loc; /* 3 bits */
printf("0x%02x,\n", v);
i++;
}
- puts("};\n");
+ printf("};\n\n");
#endif
printf("#define MAX_APPLET_NAME_LEN %u\n", MAX_APPLET_NAME_LEN);
--- /dev/null
+/* vi: set sw=4 ts=4: */
+/*
+ * Copyright (C) 2009 Denys Vlasenko.
+ *
+ * Licensed under GPLv2, see file LICENSE in this tarball for details.
+ */
+#include <unistd.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+
+/* Just #include "autoconf.h" doesn't work for builds in separate
+ * object directory */
+#include "autoconf.h"
+
+#define SKIP_applet_main
+#define ALIGN1 /* nothing, just to placate applet_tables.h */
+#define ALIGN2 /* nothing, just to placate applet_tables.h */
+#include "applet_tables.h"
+
+/* Since we can't use platform.h, have to do this again by hand: */
+#if ENABLE_NOMMU
+# define BB_MMU 0
+# define USE_FOR_NOMMU(...) __VA_ARGS__
+# define USE_FOR_MMU(...)
+#else
+# define BB_MMU 1
+# define USE_FOR_NOMMU(...)
+# define USE_FOR_MMU(...) __VA_ARGS__
+#endif
+
+static const char usage_messages[] = ""
+#define MAKE_USAGE
+#include "usage.h"
+#include "applets.h"
+;
+
+int main(void)
+{
+ const char *names;
+ const char *usage;
+ int col, len2;
+
+ col = 0;
+ names = applet_names;
+ while (*names) {
+ len2 = strlen(names) + 2;
+ if (col >= 76 - len2) {
+ printf(",\n");
+ col = 0;
+ }
+ if (col == 0) {
+ col = 6;
+ printf("\t");
+ } else {
+ printf(", ");
+ }
+ printf(names);
+ col += len2;
+ names += len2 - 1;
+ }
+ printf("\n\n");
+
+ printf("=head1 COMMAND DESCRIPTIONS\n\n");
+ printf("=over 4\n\n");
+
+ names = applet_names;
+ usage = usage_messages;
+ while (*names && usage) {
+ if (*names >= 'a' && *names <= 'z'
+ && *usage != NOUSAGE_STR[0]
+ ) {
+ printf("=item B<%s>\n\n", names);
+ printf("%s %s\n\n", names, usage);
+ }
+ names += strlen(names) + 1;
+ usage += strlen(usage) + 1;
+ }
+ return 0;
+}
+
+/* TODO: we used to make options bold with B<> and output an example too:
+
+=item B<cat>
+
+cat [B<-u>] [FILE]...
+
+Concatenate FILE(s) and print them to stdout
+
+Options:
+ -u Use unbuffered i/o (ignored)
+
+Example:
+ $ cat /proc/uptime
+ 110716.72 17.67
+
+*/
+++ /dev/null
-#!/usr/bin/perl -w
-# vi: set sw=4 ts=4:
-
-use strict;
-use Getopt::Long;
-
-# collect lines continued with a '\' into an array
-sub continuation {
- my $fh = shift;
- my @line;
-
- while (<$fh>) {
- my $s = $_;
- $s =~ s/\\\s*$//;
- #$s =~ s/#.*$//;
- push @line, $s;
- last unless (/\\\s*$/);
- }
- return @line;
-}
-
-# regex && eval away unwanted strings from documentation
-sub beautify {
- my $text = shift;
- for (;;) {
- my $text2 = $text;
- $text =~ s/IF_NOT_\w+\(.*?"\s*\)//sxg;
- $text =~ s/IF_\w+\(\s*?(.*?)"\s*\)/$1"/sxg;
- $text =~ s/USAGE_\w+\(\s*?(.*?)"\s*\)/$1"/sxg;
- last if ( $text2 eq $text );
- }
- $text =~ s/"\s*"//sg;
- my @line = split("\n", $text);
- $text = join('',
- map {
- s/^\s*"//;
- s/"\s*$//;
- s/%/%%/g;
- s/\$/\\\$/g;
- s/\@/\\\@/g;
- eval qq[ sprintf(qq{$_}) ]
- } @line
- );
- return $text;
-}
-
-# generate POD for an applet
-sub pod_for_usage {
- my $name = shift;
- my $usage = shift;
-
- # Sigh. Fixup the known odd-name applets.
-# Perhaps we can use some of APPLET_ODDNAME from include/applets.h ?
- $name =~ s/dpkg_deb/dpkg-deb/g;
- $name =~ s/fsck_minix/fsck.minix/g;
- $name =~ s/mkfs_minix/mkfs.minix/g;
- $name =~ s/run_parts/run-parts/g;
- $name =~ s/start_stop_daemon/start-stop-daemon/g;
- $name =~ s/ether_wake/ether-wake/g;
-
- # make options bold
- my $trivial = $usage->{trivial};
- if (!defined $usage->{trivial}) {
- $trivial = "";
- } else {
- $trivial =~ s/(?<!\w)(-\w+)/B<$1>/sxg;
- }
- my @f0 =
- map { $_ !~ /^\s/ && s/(?<!\w)(-\w+)/B<$1>/g; $_ }
- split("\n", (defined $usage->{full} ? $usage->{full} : ""));
-
- # add "\n" prior to certain lines to make indented
- # lines look right
- my @f1;
- my $len = @f0;
- for (my $i = 0; $i < $len; $i++) {
- push @f1, $f0[$i];
- if (($i+1) != $len && $f0[$i] !~ /^\s/ && $f0[$i+1] =~ /^\s/) {
- next if ($f0[$i] =~ /^$/);
- push(@f1, "") unless ($f0[$i+1] =~ /^\s*$/s);
- }
- }
- my $full = join("\n", @f1);
-
- # prepare notes if they exist
- my $notes = (defined $usage->{notes})
- ? "$usage->{notes}\n\n"
- : "";
-
- # prepare examples if they exist
- my $example = (defined $usage->{example})
- ?
- "Example:\n\n" .
- join ("\n",
- map { "\t$_" }
- split("\n", $usage->{example})) . "\n\n"
- : "";
-
- # Pad the name so that the applet name gets a line
- # by itself in BusyBox.txt
- my $spaces = 10 - length($name);
- if ($spaces > 0) {
- $name .= " " x $spaces;
- }
-
- return
- "=item B<$name>".
- "\n\n$name $trivial\n\n".
- "$full\n\n" .
- "$notes" .
- "$example" .
- "\n\n"
- ;
-}
-
-# the keys are applet names, and
-# the values will contain hashrefs of the form:
-#
-# {
-# trivial => "...",
-# full => "...",
-# notes => "...",
-# example => "...",
-# }
-my %docs;
-
-
-# get command-line options
-
-my %opt;
-
-GetOptions(
- \%opt,
- "help|h",
- "pod|p",
- "verbose|v",
-);
-
-if (defined $opt{help}) {
- print
- "$0 [OPTION]... [FILE]...\n",
- "\t--help\n",
- "\t--pod\n",
- "\t--verbose\n",
- ;
- exit 1;
-}
-
-
-# collect documenation into %docs
-
-foreach (@ARGV) {
- open(USAGE, $_) || die("$0: $_: $!");
- my $fh = *USAGE;
- my ($applet, $type, @line);
- while (<$fh>) {
- if (/^#define (\w+)_(\w+)_usage/) {
- $applet = $1;
- $type = $2;
- @line = continuation($fh);
- my $doc = $docs{$applet} ||= { };
- my $text = join("\n", @line);
- $doc->{$type} = beautify($text);
- }
- }
-}
-
-
-# generate structured documentation
-
-my $generator = \&pod_for_usage;
-
-my @names = sort keys %docs;
-my $line = "\t[, [[, ";
-for (my $i = 0; $i < $#names; $i++) {
- if (length ($line.$names[$i]) >= 65) {
- print "$line\n\t";
- $line = "";
- }
- $line .= "$names[$i], ";
-}
-print $line . $names[-1];
-
-print "\n\n=head1 COMMAND DESCRIPTIONS\n";
-print "\n=over 4\n\n";
-
-foreach my $applet (@names) {
- print $generator->($applet, $docs{$applet});
-}
-
-exit 0;
-
-__END__
-
-=head1 NAME
-
-autodocifier.pl - generate docs for busybox based on usage.h
-
-=head1 SYNOPSIS
-
-autodocifier.pl [OPTION]... [FILE]...
-
-Example:
-
- ( cat docs/busybox_header.pod; \
- docs/autodocifier.pl usage.h; \
- cat docs/busybox_footer.pod ) > docs/busybox.pod
-
-=head1 DESCRIPTION
-
-The purpose of this script is to automagically generate
-documentation for busybox using its usage.h as the original source
-for content. It used to be that same content has to be duplicated
-in 3 places in slightly different formats -- F<usage.h>,
-F<docs/busybox.pod>. This was tedious and error-prone, so it was
-decided that F<usage.h> would contain all the text in a
-machine-readable form, and scripts could be used to transform this
-text into other forms if necessary.
-
-F<autodocifier.pl> is one such script. It is based on a script by
-Erik Andersen <andersen@codepoet.org> which was in turn based on a
-script by Mark Whitley <markw@codepoet.org>
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<--help>
-
-This displays the help message.
-
-=item B<--pod>
-
-Generate POD (this is the default)
-
-=item B<--verbose>
-
-Be verbose (not implemented)
-
-=back
-
-=head1 FORMAT
-
-The following is an example of some data this script might parse.
-
- #define length_trivial_usage \
- "STRING"
- #define length_full_usage \
- "Prints out the length of the specified STRING."
- #define length_example_usage \
- "$ length Hello\n" \
- "5\n"
-
-Each entry is a cpp macro that defines a string. The macros are
-named systematically in the form:
-
- $name_$type_usage
-
-$name is the name of the applet. $type can be "trivial", "full", "notes",
-or "example". Every documentation macro must end with "_usage".
-
-The definition of the types is as follows:
-
-=over 4
-
-=item B<trivial>
-
-This should be a brief, one-line description of parameters that
-the command expects. This will be displayed when B<-h> is issued to
-a command. I<REQUIRED>
-
-=item B<full>
-
-This should contain descriptions of each option. This will also
-be displayed along with the trivial help if CONFIG_FEATURE_TRIVIAL_HELP
-is disabled. I<REQUIRED>
-
-=item B<notes>
-
-This is documentation that is intended to go in the POD or SGML, but
-not be printed when a B<-h> is given to a command. To see an example
-of notes being used, see init_notes_usage in F<usage.h>. I<OPTIONAL>
-
-=item B<example>
-
-This should be an example of how the command is actually used.
-This will not be printed when a B<-h> is given to a command -- it
-will only be included in the POD or SGML documentation. I<OPTIONAL>
-
-=back
-
-=head1 FILES
-
-F<usage.h>
-
-=head1 COPYRIGHT
-
-Copyright (c) 2001 John BEPPU. All rights reserved. This program is
-free software; you can redistribute it and/or modify it under the same
-terms as Perl itself.
-
-=head1 AUTHOR
-
-John BEPPU <b@ax9.org>
-
-=cut
-
projects / platform / upstream / busybox.git / commitdiff