device: Set disconnect timer to zero for fast disconnection
[platform/upstream/bluez.git] / ChangeLog
1 ver 5.70:
2         Fix issue with not sending GATT confirmations.
3         Fix issue with not handling initiator properly.
4         Fix issue with not checking PBAP counter length.
5         Add support for MICP profile and MICS service.
6
7 ver 5.69:
8         Fix issue with BAP enabling state correctly when resuming.
9         Fix issue with detaching source ASEs only after Stop Ready.
10         Fix issue with handling VCP audio location and descriptor.
11         Fix issue with generating IRK for adapter with privacy enabled.
12         Add support for BAP broadcast sink.
13
14 ver 5.68:
15         Fix issue with A2DP and handling of Transport.Acquire.
16
17 ver 5.67:
18         Fix issue with BAP and initiating QoS and Enable procedures.
19         Fix issue with BAP and detaching streams when PAC is removed.
20         Fix issue with BAP and reading all instances of PAC.
21         Fix issue with BAP and not being able to reconfigure.
22         Fix issue with BAP and transport configuration changes.
23         Fix issue with BAP and handling unexpected disconnect.
24         Fix issue with GATT and not removing pending services.
25         Fix issue with GATT and client ready handling.
26         Fix issue with handling fallback to transient hostname.
27         Add support for SecureConnections configuration option.
28         Add support for Mesh Remove Provisioning.
29         Add support for Mesh Private Beacons.
30
31 ver 5.66:
32         Fix issue with A2DP and transport connection collisions.
33         Fix issue with allowing application specific error codes.
34         Fix issue with not setting initiator flag correctly.
35         Fix issue with HoG Report MAP size handling.
36         Add initial support for Basic Audio Profile.
37         Add initial support for Volume Control Profile.
38
39 ver 5.65:
40         Fix issue with A2DP cache invalidation handling.
41         Fix issue with A2DP and not initialized SEP codec.
42         Fix issue with A2DP and multiple SetConfiguration to same SEP
43         Fix issue with AVRCP and not properly initialized volume.
44         Fix issue with SDP records when operating in LE only mode.
45         Fix issue with HoG and not reading report map of instances.
46         Fix issue with GATT server crashing while disconnecting.
47         Fix issue with not removing connected devices.
48         Fix issue with enabling wake support without RPA Resolution.
49         Fix issue with pairing failed due to the error of Already Paired.
50         Add support for CONFIGURATION_DIRECTORY environment variable.
51         Add support for STATE_DIRECTORY environment variable.
52         Add support for "Bonded" property with Device API.
53         Add experimental support for ISO socket.
54
55 ver 5.64:
56         Fix issue with handling A2DP discover procedure.
57         Fix issue with media endpoint replies and SetConfiguration.
58         Fix issue with HoG queuing events before report map is read.
59         Fix issue with HoG and read order of GATT attributes.
60         Fix issue with HoG and not using UHID_CREATE2 interface.
61         Fix issue with failed scanning for 5 minutes after reboot.
62
63 ver 5.63:
64         Fix issue with storing IRK causing invalid read access.
65         Fix issue with disconnecting due to GattCharacteristic1.MTU.
66         Add support for Device{Found,Lost} of advertising monitoring.
67
68 ver 5.62:
69         Fix issue with handling truncation when loading LTKs.
70         Fix issue with accepting Exchange MTU on EATT bearer.
71         Fix issue with clearing DeviceLost timers on power down.
72         Fix issue with AVCTP browsing channel and missing ERTM.
73         Fix issue with AVDTP and local SEID pool for each adapter.
74         Add support for BR/EDR and LE connection failure reasons.
75
76 ver 5.61:
77         Fix issue with A2DP while waiting for command response.
78         Fix issue with A2DP when SetConfiguration fails.
79         Fix issue with device removal handling.
80         Fix issue with storing discoverable setting.
81         Add support for Central Address Resolution characteristic.
82         Add support for admin policy plugin.
83
84 ver 5.60:
85         Fix issue with reading from RFKILL device node.
86         Fix issue with AVDTP and parsing capabilities.
87         Fix issue with UnregisterApplication handling.
88         Fix issue with RegisterProfile if UUID already exists.
89         Fix issue with GATT client attribute read with offset.
90         Fix issue with non-discoverable device and advertising monitor.
91
92 ver 5.59:
93         Fix issue with string to UUID-32 conversion.
94         Fix issue with connect request if SDP search failed.
95         Fix issue with accepting invalid AVDTP capabilities.
96         Fix issue with unregister handling of AVRCP player.
97
98 ver 5.58:
99         Fix issue with usage of deprecated GLib functions.
100
101 ver 5.57:
102         Fix issue with handling GATT notification PDU parsing.
103         Fix issue with registering DIS without a valid source.
104         Fix issue with removing remote SEPs when loading from cache.
105
106 ver 5.56:
107         Fix issue with setting AVDTP disconnect timer.
108         Fix issue with AVDTP not sending GetCapabilities.
109         Fix issue with AVDTP connecting using streaming mode.
110         Fix issue with handling A2DP and remote SEP disappearing.
111         Fix issue with handling session of A2DP channels.
112         Fix issue with GATT and handling device removal.
113         Fix issue with GATT not accepting multiple requests.
114         Fix issue with HID report value callback registration.
115         Add support for new advertising management command.
116         Add support for battery D-Bus interface.
117
118 ver 5.55:
119         Fix issue with handling security level for HoG.
120         Fix issue with handling HIDSDPDisable attribute.
121         Fix issue with handling HID virtual cable unplug.
122         Fix issue with handling HID channel disconnect order.
123         Fix issue with handling AVDTP delay reporting states.
124         Fix issue with handling AVRCP notification events.
125         Fix issue with handling AVRCP list player attributes.
126         Fix issue with handling AVRCP category 1 player settings.
127         Fix issue with handling AVRCP media player passthrough bitmask.
128         Fix issue with handling HFP 1.7 default features.
129         Fix issue with handling GATT disconnecting handling.
130         Fix issue with handling GATT database hash.
131         Fix issue with handling service changed characteristic.
132         Fix issue with handling read of multiple characteristic values.
133         Fix issue with handling Just-Works auto-accept pairing.
134         Fix issue with handling authentication of bonded devices.
135         Fix issue with handling L2CAP streaming mode for AVDTP.
136         Fix issue with handling SysEx parser for MIDI support.
137         Fix issue with handling configured scan parameter values.
138         Fix issue with handling temporary devices removal.
139         Fix issue with handling advertising flags.
140
141 ver 5.54:
142         Fix issue with HOGP to accept data only from bonded devices.
143         Fix issue with A2DP sessions being connected at the same time.
144         Fix issue with class UUID matches before connecting profile.
145         Add support for handling MTU auto-tuning option for AVDTP.
146         Add support for new policy for Just-Works repairing.
147         Add support for Enhanced ATT bearer (EATT).
148
149 ver 5.53:
150         Fix issue with handling unregistration for advertisment.
151         Fix issue with A2DP and handling recovering process.
152         Fix issue with udpating input device information.
153         Add support for loading blocked keys.
154
155 ver 5.52:
156         Fix issue with AVDTP session disconnect timeout handling.
157         Mark media endpoint APIs as stable interfaces.
158
159 ver 5.51:
160         Fix issue with first agent not being registered as default.
161         Fix issue with loading devices without Service Changed CCC.
162         Fix issue with GATT client and extended property reading.
163         Fix issue with handling GATT client invalid read behavior.
164         Fix issue with handling GATT disconnect handler removal.
165         Fix issue with missing GATT/GAP service records for SDP.
166         Fix issue with checking SDP continuation state length.
167         Fix issue with HID device removal on HoG disconnect.
168         Fix issue with AVDTP and session destroy handling.
169         Fix issue with AVCTP and output MTU accounting.
170         Fix issue with AVRCP and creating media items.
171         Add support for GATT database caching feature.
172         Add experimental support for Bluetooth Mesh Profile.
173
174 ver 5.50:
175         Fix issue with GATT and reading long values.
176         Fix issue with GATT and reading multiple includes.
177         Fix issue with GATT and service changes when offline.
178         Fix issue with handling secondary service discovery.
179         Fix issue with handling persistency of CCC values.
180         Fix issue with handling Mesh session on disconnection.
181         Fix issue with handling Mesh proxy PDU SAR message length.
182         Fix issue with handling Mesh default heartbeat TTL value.
183         Add support for Mesh node-reset operation handling.
184         Add support for GATT authorization request handling.
185         Add support for GATT minimum key size requirements.
186         Add support for GATT server and included services.
187         Add support for handling additional advertising data.
188         Add support for handling separate discoverable state.
189         Add support for enabling HFP version 1.7 features.
190         Add support for dedicated Bluetooth logging daemon.
191
192 ver 5.49:
193         Fix issue with configuring discoverable advertising flag.
194         Fix issue with bearer selection and single mode controllers.
195         Fix issue with Connect and ConnectProfile returning in progress.
196         Fix issue with missing Paired property change when not bonded.
197         Fix issue with storage for controllers without public address.
198         Fix issue with handling AVCTP disconnecting the channel queue.
199         Fix issue with not clearing connectable setting on power off.
200         Fix issue with creating multiple mgmt socket instances.
201         Fix issue with GATT server and BR/EDR only devices.
202         Fix issue with InterfaceAdded event ordering.
203         Add support for generic ConnectDevice method call.
204         Add support for Mesh heartbeat client functionality.
205
206 ver 5.48:
207         Fix issue with subscriptions for unpaired devices.
208         Fix issue with handling A2DP and no available SEP.
209         Fix issue with handling AVCTP change path support.
210         Fix issue with handling AVCTP browsing channel.
211         Fix issue with handling AVCTP passthrough PDUs.
212         Fix issue with handling detaching of controller.
213         Fix issue with handling start discovery results.
214         Fix issue with handling non-connectable devices.
215         Fix issue with handling unused parameter in WriteValue.
216         Add support for service side AcquireWrite and AcquireNotify.
217         Add support for providing address type information.
218         Add support for cable based authentication and pairing.
219         Add support for Bluetooth Low-Energy battery service.
220         Add support for BTP client for qualification testing.
221         Add support for additional Mesh control functionality.
222         Mark advertising manager APIs as stable interfaces.
223
224 ver 5.47:
225         Fix issue with handling AcquireNotify registration.
226         Fix issue with handling support for reconnection interval.
227         Fix issue with handling A2DP transport and accepting streams.
228         Fix issue with fallback from BR/EDR to LE bearer handling.
229         Add support for appearance and local name advertising data.
230         Add support for retrieving the supported discovery filters.
231         Add support for decoding Bluetooth 5.0 commands and events.
232         Add support for decoding Bluetooth Mesh advertising bearer.
233         Add support for Bluetooth Mesh control application.
234
235 ver 5.46:
236         Fix issue with handling ATT over BR/EDR connections.
237         Fix issue with SDP browsing cleanup after connection.
238         Fix issue with pointer dereference and OPP Put request.
239         Fix issue with identity address updates during pairing.
240         Fix issue with not removing services that had disappeared.
241         Add support for improved discovery of included services.
242         Add support for simplified characteristics discovery.
243         Add support for GATT caching configuration option.
244         Add experimental support for AcquireWrite and AcquireNotify.
245
246 ver 5.45:
247         Fix issue with agent support in Bluetooth client tool.
248         Fix issue with handling re-connection policy.
249         Fix issue with handling unknown ATT commands.
250         Fix issue with handling GATT Service Includes property.
251         Fix issue with handling PullAll for OBEX transfers.
252         Fix issue with handling delay in AVDTP Suspend responses.
253         Fix issue with handling decoding of management frames.
254         Add support for frame counters in Bluetooth monitor tool.
255
256 ver 5.44:
257         Fix issue with GAP and GATT service registration.
258         Fix issue with wrong address type for ATT sockets.
259         Fix issue with dictionary entries for advertising.
260         Fix issue with device information and HID over GATT.
261         Fix issue with handling secondary service discovery.
262         Fix issue with handling Attribute Read Long procedure.
263         Fix issue with handling Attribute Write Long procedure.
264         Fix issue with handling abort of AVDTP SetConfiguration.
265         Add support for single-mode static address configuration.
266         Add support for MIDI over Bluetooth Low Energy.
267
268 ver 5.43:
269         Fix issue with HID over GATT support.
270         Fix issue with ATT Find By Type response handling.
271         Fix issue with handling insufficient authentication.
272         Fix issue with bonding while pairing is in progress.
273         Fix issue with BR/EDR pairing for dual-mode devices.
274         Fix issue with handling profile policy resets.
275         Fix issue with connecting state of services.
276         Fix issue with handling PAN GN Master role.
277         Add support for enabling LE Privacy feature.
278
279 ver 5.42:
280         Fix issue with PBAP call logs from different folders.
281         Fix issue with OBEX over L2CAP and PowerPC architecture.
282         Fix issue with BR/EDR over LE selection during discovery.
283         Fix issue with selection of bearer after bonding.
284         Fix issue with handling socket recv() return values.
285         Fix issue with setting connecting service state.
286         Fix issue with setting correct ATT default MTU value.
287         Fix issue with not setting AVRCP player identifier.
288         Fix issue with handling AVRCP browsable player.
289         Fix issue with addressing AVRCP player changes.
290         Add support for new management tracing capability.
291         Mark GATT D-Bus APIs as stable interfaces.
292
293 ver 5.41:
294         Fix issue with service state changes handling.
295         Fix issue with AVRCP and no available player.
296         Fix issue with handling discovery filters.
297         Fix issue with handling temporary addresses.
298         Fix issue with GATT MTU size and BR/EDR links.
299         Fix issue with OBEX and creating directories.
300
301 ver 5.40:
302         Fix issue with not storing GATT attributes.
303         Fix issue with optional GATT notifications.
304         Fix issue with reading GATT extended properties.
305         Fix issue with GATT device name properties.
306         Fix issue with previously paired devices.
307         Fix issue with handling device removal.
308         Fix issue with profile connection handling.
309         Add support for TTY monitor protocol.
310
311 ver 5.39:
312         Fix issue with missing uHID kernel support.
313         Fix issue with GATT reliable write handling.
314         Fix issue with GATT service changed handling.
315         Fix issue with GATT execute write handling.
316         Fix issue with AVRCP player event handling.
317         Fix issue with AVRCP controller handling.
318         Fix issue with AVDTP connection handling.
319         Fix issue with AVDTP error handling.
320
321 ver 5.38:
322         Fix issue with stack overflow and UUID handling.
323         Fix issue with ObjectManager interface and GATT.
324         Fix issue with GATT database and error handling.
325         Fix issue with GATT client notifications.
326         Fix issue with GATT object ordering.
327         Fix issue with GATT default MTU exchange.
328         Fix issue with device attribute clearing.
329         Fix issue with AVRCP capabilities request.
330
331 ver 5.37:
332         Fix issue with registering external profiles.
333         Fix issue with connecting external profiles.
334         Fix issue with GATT service changed handling.
335         Fix issue with not emitting GattServices update.
336         Convert to unified HID over GATT profile support.
337         Convert to KeyboardDisplay as default IO capability.
338         Install btattach utility by default.
339
340 ver 5.36:
341         Fix issue with PBAP headers for size query.
342         Fix issue with AVRCP current player handling.
343         Fix issue with device information handling.
344         Fix issue with device disconnect handling.
345         Fix issue with duplicate connect handling.
346         Fix issue with attribute claiming for drivers.
347
348 ver 5.35:
349         Fix issue with connected devices after discovery.
350         Fix issue with profile support and LTK loading.
351         Fix issue with AVRCP events for volume control.
352         Fix issue with OBEX session owner handling.
353         Fix issue with HID over GATT setup failures.
354         Fix issue with GATT notification registration.
355         Fix issue with GATT cache validation feature.
356         Add support for persistent GATT database.
357         Add support for controller enabling option.
358
359 ver 5.34:
360         Fix issue with GATT profiles and auto-connect.
361         Fix issue with missing GoepL2CapPsm SDP data.
362         Fix issue with suspending AVDTP endpoints.
363         Fix issue with audio service state on disconnect.
364         Add support for AVRCP Set Addressed Player feature.
365         Add support for AVRCP Get Folder Items feature.
366         Add support for Android 5.1 HFP WBS callbacks.
367
368 ver 5.33:
369         Fix issue with memory leak in GATT database.
370         Fix issue with AVDTP set configuration handling.
371         Fix issue with AVDTP discover procedure.
372         Fix issue with not emitting Paired property.
373
374 ver 5.32:
375         Fix issue with OPP GET request path handling.
376         Fix issue with ATT information request errors.
377         Fix issue with advertising instance numbers.
378         Fix issue with overwriting SDP record cache.
379         Fix issue with new connections during disconnect.
380         Add support for GATT security auto-elevation.
381
382 ver 5.31:
383         Fix issue with crash in networking interface.
384         Fix issue with crash when creating endless GATT loops.
385         Fix issue with memory leak when connecting services.
386         Fix issue with memory leak creating new D-Bus proxy.
387         Fix issue with profile connections from remote devices.
388         Fix issue with GATT over BR/EDR and MTU notification.
389         Fix issue with HID and dual mode remote devices.
390         Fix issue with handling A2DP vendor codec setup.
391         Fix issue with AVRCP and syncing player state.
392         Fix issue with GATT secondary discovery handling.
393         Fix issue with wrong characteristic allocation.
394         Add support for handling BNEP setup response.
395         Add support for setting GATT database security flags.
396         Add support for setting discovery filters interface.
397         Add support for user controlled advertising interface.
398         Update Android qualification documentation to PTS 6.1 release.
399
400 ver 5.30:
401         Fix compilation error in C++ due to inline function.
402         Fix issue with missing storage of device information.
403         Fix issue with GATT client and gaps in service handles.
404         Fix issue with AVDTP discovery callback crashing.
405         Fix issue with AVCTP channel handling in case of conflicts.
406         Fix issue with AVRCP target and get capabilities command.
407         Add experimental support for LE advertising manager API.
408         Add support for Android 5.1 GATT MTU exchange API.
409
410 ver 5.29:
411         Fix issue with AVCTP initial key repeat timeout.
412         Fix issue with Android application disconnect handling.
413         Fix issue with Android support and service notifications.
414         Fix issue with Android support and Exchange MTU Request.
415         Fix issue with Android HFP support and AT+CMER handling.
416         Fix issue with Android HFP support and SLC setup.
417         Fix issue with Android HFP support and call hold status.
418         Fix issue with Android HFP support and indicator handling.
419         Fix issue with Android HFP support and SCO/eSCO disconnection.
420         Fix issue with Android HID over GATT support and battery service.
421         Fix issue with GATT sending Exchange MTU Request for BR/EDR.
422         Fix issue with GATT notification support without CCC.
423         Fix issue with GATT object life-time after disconnects.
424         Fix issue with GATT notification handling API.
425         Add experimental support for GATT client D-Bus API.
426         Add experimental support for GATT server D-Bus API.
427         Add support for Multi Profile Specification.
428         Update Android qualification documentation to PTS 6.0 release.
429
430 ver 5.28:
431         Fix issue with GATT device discovery and probing.
432         Fix issue with bearer selection for dual-mode devices.
433         Fix issue with device removal while connected.
434         Fix issue with device name setting from inquiry response.
435         Fix issue with missing termination of name characteristic.
436         Fix issue with UTF-8 length handling for device name.
437         Fix issue with AVCTP key auto release handling.
438         Fix issue with AVCTP key press repetition handling.
439         Fix issue with payload sizes and GATT notifications.
440         Fix issue with memory corruption and GATT notifications.
441         Add support for HID proxy switching and CSR 8510 A10 devices.
442         Add support for Broadcom hex2hcd conversion utility.
443
444 ver 5.27:
445         Fix issue with endian handling and management interface.
446         Fix issue with pending GATT operations when disconnecting.
447         Fix issue with 128-bit UUID conversions for HID over GATT.
448         Add support for Android 5.0 SELinux policies.
449
450 ver 5.26:
451         Fix issue with handling A2DP XCASE connection state.
452         Fix issue with crash and A2DP configuration failures.
453         Fix issue with crash during OBEX session shutdown.
454         Add support for version 1.2 of Phonebook Access Profile.
455         Add support for HID over GATT get and set report handling.
456         Add support for Low Energy Secure Connections feature.
457         Add support for Bluetooth 4.2 commands and events.
458         Add support for Android 5.0 Bluetooth features.
459
460 ver 5.25:
461         Fix issue with SCO connection after codec negotiation.
462         Fix issue with GATT and secondary service discovery.
463         Fix issue with GATT write descriptor callback.
464         Fix issue with MAP supported features bits.
465         Add support for MAP local time and timezone offset.
466         Add support for PBAP speed-dial and favorites folders.
467         Add support for PBAP speed-dial and identifier filters.
468         Add support for controller mode configuration option.
469         Add initial support for Android Lollipop features.
470
471 ver 5.24:
472         Fix issue with storing of connection parameters.
473         Add support for Phonebook Access Profile 1.2 features.
474         Add support for Message Access Profile 1.2 event reports.
475         Add support for Android Bluetooth configuration options.
476
477 ver 5.23:
478         Fix issue with concurrent authorization requests.
479         Fix issue with HID report identifier mismatch.
480         Fix issue with crash when receiving uHID events.
481         Fix issue with crash and OBEX disconnect handling.
482         Fix issue with OBEX client transfers and suspend.
483         Fix issue with parsing of MAP application parameters.
484         Fix issue with devices rejecting AVRCP GetCapabilities.
485         Add support for kernel whitelist and Android Bluetooth.
486
487 ver 5.22:
488         Fix issue with UHID_OUTPUT events mapping.
489         Fix issue with UHID_FEATURE events handling.
490         Fix issue with UINT32_MAX overflow and AVRCP.
491         Fix issue when dirent type DT_UNKNOWN is returned.
492         Add support for kernel whitelist filtering feature.
493         Add support for Android Bluetooth GATT over BR/EDR.
494
495 ver 5.21:
496         Fix issue with SDP requests and wrong PDU size.
497         Fix issue with handling passive scanning triggers.
498         Add support for storing and loading connection parameters.
499         Add support for kernel background auto-connection feature.
500         Add support for Android Bluetooth Scan Parameters feature.
501         Add support for Android Bluetooth Device Information feature.
502         Add support for Android Bluetooth Health Device interface.
503
504 ver 5.20:
505         Fix issue with LED handling of PS3 controllers.
506         Add support for Android Bluetooth GATT server interface.
507         Add support for Android Bluetooth HID over GATT feature.
508         Add support for Android Bluetooth multi-profile feature.
509         Add support for Android Bluetooth aptX audio integration.
510
511         Note: aptX codec not included
512
513 ver 5.19:
514         Fix issue with OBEX Put-Delete and Create-Empty methods.
515         Fix issue with AVRCP browsable/searchable player properties.
516         Fix issue with handling multiple default agents.
517         Fix issue with handling unpair event per bearer.
518         Fix issue with HID over GATT report ID presence.
519         Add support for HID protocol handling in userspace.
520         Add support for Bluetooth reconnection policy framework.
521         Add support for Android Bluetooth SCO over HCI transport.
522         Add support for Android Bluetooth audio quality control.
523         Add support for Android Bluetooth Low Energy only mode.
524
525 ver 5.18:
526         Fix issue with identifying LE single mode devices.
527         Fix issue with L2CAP and RFCOMM peer address lookup.
528         Add support for handling OBEX authentication procedure.
529         Add support for Android Bluetooth GATT client interface.
530
531 ver 5.17:
532         Fix issue with not resetting OBEX SRM setup.
533         Fix issue with BR/EDR devices and auto-connect list.
534         Fix issue with bonding complete detection as peripheral.
535         Fix issue with not updating bearer timestamp of connections.
536         Fix issue with paired property for multiple bearers.
537         Add support for Android Bluetooth Handsfree interface.
538         Add support for Android Bluetooth Wideband speech.
539
540 ver 5.16:
541         Fix issue with HID over GATT physical location.
542         Fix issue with HID over GATT unique identifier.
543         Fix issue with missing paired property notification.
544         Fix issue with endianess of long term key storage.
545         Add support for storing signature resolving keys.
546         Add support for Android Bluetooth AVRCP interface.
547
548 ver 5.15:
549         Fix issue with LE enabling and background scanning.
550         Fix issue with HID over GATT input device name.
551         Fix issue with storage of slave long term keys.
552         Add support for handling identity resolving keys.
553         Add support for Android Bluetooth A2DP interface.
554         Add support for Android Bluetooth audio interface.
555
556 ver 5.14:
557         Fix issue with marking PS3 controllers as trusted.
558         Fix issue with authorization of PS3 controllers.
559         Add support for DualShock 4 controller detection.
560         Add support for legacy pairing emulation.
561         Add support for secure simple pairing emulation.
562         Add support for automated pairing testing.
563         Add support for RFCOMM protocol testing.
564         Add support for HCI controller testing.
565
566 ver 5.13:
567         Fix issue with PS3 controller detection.
568         Add support for data transfers to L2CAP testing tool.
569         Add support for delay reporting to AVDTP testing tool.
570         Add support for Android Bluetooth Core interface.
571         Add support for Android Bluetooth Socket interface.
572         Add support for Android Bluetooth HID Host interface.
573         Add support for Android Bluetooth PAN interface.
574
575 ver 5.12:
576         Fix issue with missing reply to DisconnectProfile.
577         Fix issue with icon property and class of device changes.
578         Fix issue with HID devices when SDP record is not available.
579         Fix issue with handling auto-pairing of printers.
580         Fix issue with agent authorization handling.
581         Add support for PS3 controller setup and pairing.
582         Add support for LE L2CAP CoC test capabilities.
583         Add support for AVDTP qualification test cases.
584         Add support for SMP cryptographic test cases.
585
586 ver 5.11:
587         Fix issue with connection attempt when not powered.
588         Fix issue with assigning player to AVRCP target role.
589         Fix issue with OBEX default cache directory.
590         Fix issue with SDP search error handling.
591         Fix issue with processing of SDP records.
592         Fix issue with HID to HCI switching utility.
593         Fix issue with mgmt end-to-end testing tool.
594         Fix issue with L2CAP end-to-end testing tool.
595         Add support for SMP end-to-end testing tool.
596         Add support for more Wii controllers.
597
598 ver 5.10:
599         Fix issue with discoverable timeout handling.
600         Fix issue with MAP messages and record version.
601         Fix issue with MAP messages and status events.
602         Fix issue with MAP messages and relative folders.
603         Fix issue with MAP messages and type property signals.
604         Fix issue with transfer size for OBEX GET operations.
605         Fix issue with AVRCP service class identifier.
606         Fix issue with AVRCP tracking seeked signal.
607         Add support for OBEX command line client.
608
609 ver 5.9:
610         Fix issue with network service and adapter removal.
611         Fix issue with misleading OBEX error messages.
612         Fix issue with OBEX transport reference handling.
613         Fix issue with memory leak with MAP event handler.
614         Fix issue with missing MAP property changed signal.
615         Fix issue with message type property values.
616         Fix issue with empty UUID list for devices.
617         Fix issue with profile agent cancel method.
618         Remove dependency on USB library.
619
620 ver 5.8:
621         Fix issue with missing OBEX session properties.
622         Fix issue with missing SDP service refresh.
623         Fix issue with SDP attribute range check.
624         Fix issue with priority for SDP transactions.
625         Fix issue with service discovery after pairing.
626         Fix issue with race condition in service list.
627         Fix issue with input service state transition.
628         Fix issue with default authorization for profiles.
629         Fix issue with AVRCP browsing channel connections.
630         Add support for AVRCP role agnostic sessions.
631
632 ver 5.7:
633         Fix issue with missing UUID discovery during pairing.
634         Fix issue with broken patch for SDP range check handling.
635         Fix issue with AVRCP usage of UID=0 for paused/stopped.
636         Add support MAP notification dispatching.
637
638 ver 5.6:
639         Fix issue with incoming connections without SDP record.
640         Fix issue with canceling ongoing device connections.
641         Fix issue with handling failed connection attempts.
642         Fix issue with pending resume during A2DP open failures.
643         Fix issue with registering AVRCP unsupported notification.
644         Fix issue with listing available AVRCP target settings.
645         Fix issue with missing error for OBEX SetPath commands.
646         Fix issue with missing OBEX session command queue.
647         Fix issue with retrieving multiple MAP event reports.
648         Add support for command line player utility.
649
650 ver 5.5:
651         Fix issue with race condition between SDP and properties.
652         Fix issue with handling storage of private device addresses.
653         Fix issue with NFC out-of-band pairing and power states.
654         Fix issue with short name during device update handling.
655         Fix issue with handling AVRCP without A2DP being present.
656         Add support for handling AVRCP pass-through operations.
657         Add support for automatically reconnecting HID devices.
658         Add support for automatically pairing of devices.
659
660 ver 5.4:
661         Fix issue with invalid memory access and SDP service search.
662         Add support for available player changed event for controller.
663         Add support for UIDs changed event for AVRCP controller.
664         Add support for mandatory AVRCP pass-through operations.
665         Add support for Message Notification Service (MNS) server.
666         Add support for agent methods within command line client.
667
668 ver 5.3:
669         Fix issue with registering invalid profiles.
670         Fix issue with inconsistent A2DP transport state.
671         Fix issue with A2DP resume while in configured state.
672         Fix issue with buffer overflow when processing SDP response.
673         Fix issue with missing range check for SDP attribute response.
674         Fix issue with missing validation of SDP data elements.
675         Fix issue with missing fallback to static hostname.
676         Fix issue with default adapter assignment.
677
678 ver 5.2:
679         Fix issue with connection handling for Low Energy.
680         Fix issue with broken device discovery handling.
681         Fix issue with invalid memory access within A2DP.
682         Fix issue with handling empty path name of SetPath.
683         Fix issue with handling Message Access Profile filters.
684         Fix issue with handling network service unregistration.
685         Fix issue with not handling bogus device pairing results.
686         Fix issue with initial service discovery and profile manager.
687         Add support for AVRCP volume notifications.
688         Add support for AVRCP browsing commands.
689
690 ver 5.1:
691         Fix issue with crash when removing OBEX session.
692         Fix issue with HID device disconnected from kernel.
693         Fix issue with buffer overflow when parsing HID SDP record.
694         Fix issue with SDP_TEXT_STR16 and SDP_URL_STR16 parsing.
695         Add support for integration with systemd's hostname daemon.
696         Add support for separate adapter alias property.
697         Add support for adapter and device modalias properties.
698         Add support for official BlueZ device information.
699         Add support for asynchronous management interface handling.
700         Add tool for testing management interface compliance.
701         Add tool for testing SDP qualification requirements.
702         Add tool for testing various EIR and AD data records.
703
704 ver 5.0:
705         Introduce D-Bus Properties and ObjectManager interfaces.
706         Add support for generic profile interface.
707         Add support for global agent interface.
708         Add support for integrated OBEX daemon.
709         Add support for integrated hcidump utility.
710         Add support for Bluetooth tracing and monitor utility.
711         Add support for Bluetooth command line client utility.
712         Remove support for Handsfree gateway handling.
713         Remove support for GStreamer A2DP and SBC elements.
714         Disable default installation of Bluetooth library.
715
716 ver 4.101:
717         Fix issue with missing BlueZ service file.
718         Fix issue with aborting A2DP setup during AVDTP start.
719         Fix issue with handling of multiple A2DP indication.
720         Fix issue with handling AVDTP abort with invalid SEID.
721         Fix issue with rejecting AVDTP abort commands.
722         Add support for handling AVDTP command collision.
723
724 ver 4.100:
725         Fix issue with crashing when SCO connection fails.
726         Fix issue with HFP gateway failing on first GSM connection.
727         Fix issue with AVRCP and handling of vendor commands.
728         Fix issue with handling AVRCP subunit info command.
729         Fix issue with missing capability for AVRCP track reached end.
730         Fix issue with AVDTP signaling and GStreamer SBC NULL check.
731         Fix issue with AVDTP Reconfigure Reject message.
732         Fix issue with incorrect EIR length parsing.
733         Fix issue with SDP disconnect for HIDSDPDisable.
734         Fix issue with SDP interoperability with Mac OS X Lion.
735         Fix issue with reverse SDP discovery with some devices.
736         Fix issue with discovering state during power off operation.
737         Add support for AVRCP Volume Changed notifications.
738         Add support for AVRCP Set Absolute Volume handling.
739         Add support for display legacy PIN code agent method.
740         Add support for multiple media transports per endpoint.
741         Add support for discovering device information characteristics.
742         Add support for vendor source for Device ID setting.
743         Add support for immediate alert server.
744         Add support for link loss server.
745
746         Notes:
747         This version requires D-Bus 1.4 or later.
748         This version requires GLib 2.28 or later.
749
750 ver 4.99:
751         Fix issue with missing retries for BNEP connection setup.
752         Fix issue with not showing name if first EIR has no details.
753         Fix issue with running SDP discovery for LE devices.
754         Add support for GATT using 128-bit Bluetooth UUIDs.
755         Add support for retrieving key size information.
756         Add support for storing Long Term Keys.
757         Add support for Proximity Reporter API.
758         Add support for KeyboardDisplay IO capability.
759         Add support for version 1.0 of management API.
760         Add support for monitoring interface.
761
762 ver 4.98:
763         Fix issue with adapter list upon initialization failure.
764         Fix issue with missing legacy property for Low Energy.
765         Fix issue with missing EIR information handling.
766         Fix issue with device address type tracking.
767         Fix issue with alert level characteristic.
768         Fix issue with headset shutdown handling.
769         Fix issue with Wiimote address handling.
770         Add support for advanced l2test options.
771         Add support for attribute protocol and multiple adapters.
772
773 ver 4.97:
774         Update support for proximity profile.
775         Fix issue with SBC audio decoding quality.
776         Fix multiple issues with HFP support.
777         Fix multiple issues with A2DP support.
778         Fix multiple issues with AVDTP support.
779         Fix multiple issues with AVRCP support.
780         Add support for AVRCP meta-data transfer.
781         Add support for Bluetooth based thermometers.
782
783 ver 4.96:
784         Fix issue with race condition in AVDTP stream start.
785         Fix issue with global adapter offline switching.
786         Fix issue with pairing and No Bonding devices.
787         Add support for Nintendo Wii Remote pairing.
788
789 ver 4.95:
790         Fix issue with AVCTP replies with invalid PID.
791         Fix issue with AVRCP and unknown packet types.
792         Fix issue with AVRCP not using NOT_IMPLEMENTED correctly.
793         Fix issue with AVDTP discovery if all endpoints are in use.
794         Fix issue with invalid memory writes and media support.
795         Fix issue with not removing device alias and unbonding.
796         Fix issue with device disconnects and offline mode handling.
797         Add support for setting adapter name based on machine-info.
798         Add support for systemd service configuration.
799
800 ver 4.94:
801         Fix issue with invalid read of memory in various modules.
802         Fix issue with buffer overflow when sending AVDTP commands.
803         Fix issue with response to vendor dependent AVRCP commands.
804         Fix issue with headset when not able to reply with ERROR.
805         Fix issue with crash when creating a device from storage.
806         Fix issue with handling non UTF-8 devices names.
807         Add support for improved discovery procedure.
808
809 ver 4.93:
810         Fix issue with property type and Health Main channel.
811         Fix issue with crash when removing devices.
812         Add support for hid2hci and udev integration.
813
814 ver 4.92:
815         Fix issue with handling of A2DP suspend response.
816         Fix issue with crashing when acquiring A2DP stream.
817         Fix issue with missing check for valid SCO before shutdown.
818         Fix issue with waiting for POLLERR when disconnecting SCO.
819         Fix issue with disconnect after primary service discovery.
820         Fix issue with attribute interface registration.
821         Add support for primary services over BR/EDR.
822         Add support for flushable packets of A2DP media.
823
824 ver 4.91:
825         Fix issue with LMP version string and hciconfig.
826         Fix issue with missing discovery signal when scanning.
827         Fix issue with wrong state and canceling name resolving.
828         Fix issue with missing check during adapter initialization.
829         Fix issue with missing protocol not supported error and A2DP.
830         Fix issue with crash during driver unregistering and A2DP.
831         Fix issue with crash when receiving AVDTP close command.
832         Fix issue with remote SEP handling when A2DP codec changes.
833         Fix issue with SCO hangup handling and state changes.
834         Fix issue with security level and MCAP instances.
835         Fix issue with memory leak and HDP data channels.
836         Add support for discover characteristics by UUID to gatttool.
837         Add initial support for Out-of-Band association model.
838         Add initial support for SIM Access Profile.
839
840 ver 4.90:
841         Fix issue with setting of global mode property.
842         Fix issue with handling of RequestSession responses.
843         Fix issue with TP_BNEP_CTRL_BV_01_C qualification test.
844         Fix issue with too short AVDTP request timeout.
845         Add support for SIM Access Profile manager.
846         Add support for new UUID utility functions.
847         Add support for attribute server notifications.
848         Add support for client characteristic configuration.
849         Update support for interactive GATT utility.
850
851 ver 4.89:
852         Fix issue with name resolving when discovery is suspended.
853         Fix issue with parsing flags of advertising report.
854         Fix issue with SEP handling if interface is disabled.
855         Fix issue with device object creation on disconnect event.
856         Fix issue with indicators whenever the driver is initialized.
857         Fix issue with call indicator when parsing call info reply.
858         Fix issue with crash and allowed GATT MTU was too large.
859         Add support for SDP record of Primary GATT services.
860         Add support for interactive mode for GATT utility.
861
862 ver 4.88:
863         Fix issue with HID channel reference count handling.
864         Fix issue with daemon exit on badly formatted AT+VTS.
865         Fix issue with crash while parsing of endpoint properties.
866         Fix issue with possible crash on AVDTP Suspend request timeout.
867         Fix issue with stopping inquiry before adapter is initialized.
868         Fix issue with creating device object when connection fails.
869         Fix issue with sending HCIDEVUP when adapter is already up.
870         Fix issue with handling bonding IO channel closing.
871         Fix agent cancellation in security mode 3 situations.
872         Update pairing code to support management interface.
873
874 ver 4.87:
875         Fix issue with initialization when adapter is already up.
876         Fix issue with attribute server MTU and incoming connections.
877         Fix issue with duplicate characteristics after discovery.
878
879 ver 4.86:
880         Revert wrong fix for SDP PDU size error response.
881         Fix various memory leaks in A2DP and AVDTP support.
882         Add Routing property to MediaTransport interface
883         Add proper tracking mechanism to NREC status.
884         Add READ_BLOB_REQUEST support to attribute server.
885
886 ver 4.85:
887         Fix issue with event mask setting for older adapters.
888         Fix issue with device creation and pairing failures.
889         Add support for telephony support via oFono.
890         Add support for characteristic security level.
891         Update support for service registration.
892
893 ver 4.84:
894         Fix issue with wrong parameters and device found signals.
895         Fix issue with leaking EIR data if RSSI does not change.
896         Fix issue with adapter initialization state.
897         Fix issue with closing of SDP server sockets.
898
899 ver 4.83:
900         Fix issue with already connected HFP/HSP endpoints.
901         Fix missing reply when create device is canceled.
902         Fix memory leak within the attribute server.
903         Fix memory leak with unused extended inquiry name.
904         Fix setting paired state when device->authr is false.
905         Fix clearing authentication request for renewed keys.
906         Add support for storing link keys in runtime memory.
907         Update support for primary service discovery.
908
909 ver 4.82:
910         Fix crash with mmap of files with multiples of page size.
911         Fix HFP response and hold (AT+BTRH) command response.
912         Fix device creation error response when powered off.
913         Fix device removal when connecting/browsing fails.
914         Add initial attribute permission implementation.
915         Add AVDTP SRC stream send buffer size verification.
916         Add support for setting link policy based on features.
917
918 ver 4.81:
919         Fix issue with telephony driver initialization.
920         Fix issue with adapter services list initialization.
921         Fix crash after simultaneous authentication requests.
922         Add support for primary service search on device creation.
923
924 ver 4.80:
925         Fix legacy link key storing for some buggy adapters.
926         Fix invalid memory access when EIR field length is zero.
927         Fix adapter initialization to wait for kernel HCI commands.
928         Fix initialization of adapters which are already up.
929         Fix possible race condition when initializing adapters.
930         Fix possible crashes when attempting to connect AVDTP.
931         Fix not aborting sink stream configuration on disconnect.
932         Fix not indicating disconnected state when connecting to AVDTP.
933         Fix not dropping AVDTP session when canceling stream setup.
934         Fix AVDTP abort not being send when the state is idle.
935         Fix regression with Low Energy and interleave discovery.
936         Add a new configuration option to disable Low Energy support.
937         Add iwmmxt optimization for SBC for ARM PXA series CPUs.
938         Update support for GATT Primary Service Discovery.
939         Update MCAP and HDP support.
940
941 ver 4.79:
942         Fix issue with adapter initialization race condition.
943         Update new Bluetooth Management interface support.
944
945 ver 4.78:
946         Fix various issues with AVDTP timer handling.
947         Fix various issues with handling of mode changes.
948         Fix issue with audio disconnect watch in connecting state.
949         Fix issue with handling call waiting indicators in telephony.
950         Fix issue with handling UUID parameter and RegisterEndpoint.
951         Add initial support for Bluetooth Management interface.
952         Add support for Application property to HealthChannel.
953
954 ver 4.77:
955         Fix issue with device name and accessing already freed memory.
956         Fix issue with handling CHLD=0 command for handsfree.
957         Fix issue with manager properties and no adapters.
958         Fix issue with properties and broken service records.
959         Fix issue with A2DP playback and sample rate changes.
960         Update MCAP and HDP support.
961
962 ver 4.76:
963         Fix issue in telephony driver with hanging up held call.
964         Fix issue in telephony driver with notifications when on hold.
965         Fix issue with blocking on setconf confirmation callback.
966         Fix issue with not always signaling new streams as sinks.
967         Fix issue with errors in case of endpoint request timeout.
968         Fix issue with HFP/HSP microphone and speaker gain values.
969         Add source if the device attempt to configure local sink stream.
970         Add PSM option for GATT/ATT over BR/EDR on gatttool.
971         Add support for GATT/ATT Attribute Write Request.
972         Update MCAP and HDP support.
973
974 ver 4.75:
975         Fix use of uninitialized variable on legacy pairing.
976         Fix mismatch of attribute protocol opcode.
977
978 ver 4.74:
979         Fix regression for Legacy Pairing.
980         Fix wrong PSM value for attribute protocol.
981         Fix issue with RSSI field in advertising reports.
982         Add support for Add BR/EDR and LE interleaved discovery.
983         Add support for GATT write characteristic value option.
984         Add support for specifying download address for AR300x.
985
986 ver 4.73:
987         Fix problem with EIR data when setting the name.
988         Fix reading local name from command complete event.
989         Fix registering local endpoints with disabled socket interface.
990         Add support for more HCI operations using ops infrastructure.
991         Add support for GATT characteristic hierarchy.
992         Add support for GATT indications.
993
994 ver 4.72:
995         Fix memory leak while connecting BTIO channels.
996         Fix crash with GStreamer plugin if SBC is not supported.
997         Fix issue with GATT server stop sending notifications.
998         Fix issue with GATT and dealing with the minimum MTU size.
999         Fix issue with file descriptor leak in GATT client.
1000         Add support for UUID 128-bit handling in attribute client.
1001         Add support for encoders/decoders for MTU Exchange.
1002         Add support for the MTU Exchange procedure to the server.
1003         Add support for a per channel MTU to the ATT server.
1004         Add support for Characteristic interface.
1005         Add support for new Media API and framework.
1006         Add initial support for HDP plugin.
1007
1008 ver 4.71:
1009         Fix compilation when SBC support in not enabled.
1010         Fix crash with RequestSession and application disconnects.
1011         Fix memory leak and possible crash when removing audio device.
1012         Fix issue with closing stream of locked sep when reconfiguring.
1013         Fix issue where discovery could interfere with bonding.
1014         Fix issue with Connected status when PS3 BD remote connects.
1015         Fix issue with lifetime of fake input devices.
1016         Add support for compile time option of oui.txt path.
1017         Add support for printing IEEE1284 device ID for CUPS.
1018         Add plugin for setting adapter class via DMI.
1019         Add more features for attribute protocol and profile.
1020         Add initial support for MCAP.
1021
1022 ver 4.70:
1023         Fix incoming call indication handling when in WAITING state.
1024         Fix various SDP related qualification test case issues.
1025         Fix logic to write EIR when SDP records are changed.
1026         Fix UTF-8 validity check for remote names in EIR.
1027         Add support for UUID-128 extended inquiry response.
1028         Add service UUIDs from EIR to the DeviceFound signal.
1029         Add fast connectable feature for Handsfree profile.
1030         Add HCI command and event definitions for AMP support.
1031         Add firmware download support for Qualcommh devices.
1032         Add host level support for Atheros AR300x device.
1033         Add initial support of ATT and GATT for basic rate.
1034
1035 ver 4.69:
1036         Fix issue with calling g_option_context_free() twice.
1037         Fix inconsistencies with initial LE commands and events.
1038         Add support for telephony ClearLastNumber method.
1039         Add support for network server interface.
1040
1041 ver 4.68:
1042         Fix initialization of adapters in RAW mode.
1043         Fix signal strength for HFP in Maemo's telephony support.
1044         Add support for following the radio state via Maemo's MCE.
1045         Add initial set of LE commands and events definitions.
1046         Add mode option for L2CAP sockets to the BtIO API.
1047
1048 ver 4.67:
1049         Fix issue with authentication reply when bonding already completed.
1050         Fix issue with not canceling authentication when bonding fails.
1051         Fix issue with changed combination keys and temporary storage.
1052         Fix issue with sdp_get_supp_feat library function.
1053         Fix issue with missing unblock on device removal.
1054         Fix issue with not waiting for mode change completion.
1055         Add ARMv6 optimized version of analysis filter for SBC encoder.
1056
1057 ver 4.66:
1058         Fix regression with full debug enabling via SIGUSR2.
1059         Fix redundant speaker/microphone gains being sent.
1060         Fix not emitting PropertyChanged for SpeakerGain/MicrophoneGain.
1061         Fix issue with storage usage when a record is not found in memory.
1062         Fix issue with DiscoverServices not retrieving any records.
1063         Fix audio profile disconnection order to match whitepaper.
1064         Fix auto-accept confirmation when local agent has NoInputNoOutput.
1065         Fix remote just-works SSP when MITM protection is required.
1066         Fix performing dedicated bonding without MITM requirement.
1067         Add support for storing debug link keys in runtime memory.
1068
1069 ver 4.65:
1070         Fix issues with general bonding being default setting now.
1071         Fix driver removal upon device removal.
1072         Add new "Blocked" property to device objects.
1073         Add hciconfig support for blacklisting.
1074         Add support for dynamic debug feature.
1075
1076 ver 4.64:
1077         Fix invalid memory access in headset_get_nrec function.
1078         Fix issue with disconnect event on higher protocol layers.
1079         Fix issue with list parsing in sdp_set_supp_features function.
1080         Fix device object reference counting for SDP browse requests.
1081         Add missing memory checks whenever memory is allocated for SDP.
1082         Add support for exporting local services via D-Bus.
1083         Add more L2CAP Enhanced Retransmission test options.
1084
1085 ver 4.63:
1086         Fix avdtp_abort not canceling pending requests.
1087         Fix stale connection when abort gets rejected.
1088
1089 ver 4.62:
1090         Fix accidental symbol breakage with inquiry transmit power.
1091         Fix using invalid data from previous headset connection.
1092         Fix double free on AVDTP Abort response.
1093         Fix possible crash while verifying AVDTP version.
1094         Fix missing inuse flag when AVDTP stream is configured.
1095         Add support for Bluetooth controller types.
1096
1097 ver 4.61:
1098         Fix issues with Read Inquiry Response Transmit Power Level.
1099         Fix possible invalid read when removing a temporary device.
1100         Fix mode restoration when remember_powered is false.
1101         Fix conference call releasing in telephony-maemo.
1102         Fix segmentation fault with authorization during headset disconnects.
1103         Add support for handling unanswered AVDTP request on disconnect.
1104         Add support for handling Inquiry Response Transmit Power Level.
1105         Add support for caching of remote host features.
1106         Add preliminary voice dialing support for HSP.
1107
1108 ver 4.60:
1109         Fix voice mailbox number reading from SIM.
1110         Fix some races with D-Bus mainloop integration.
1111         Add helpers for D-Bus signal watches.
1112
1113 ver 4.59:
1114         Add values for Bluetooth 4.0 specification.
1115         Add SDP functions for HDP support.
1116         Add test scripts for input and audio.
1117         Fix missing close on BtIO create_io function.
1118         Fix sending incorrect AVDTP commands after timeout occurs.
1119         Fix timer removal when device disconnects unexpectedly.
1120         Fix Extended Inquiry Response record for Device ID.
1121
1122 ver 4.58:
1123         Fix crash when adapter agent exists during authentication.
1124         Fix CK-20W quirks for play and pause events.
1125
1126 ver 4.57:
1127         Fix unloading of drivers for uninitialized adapters.
1128         Fix debug message to use requested and not opened SEID.
1129         Fix codec selection for GStreamer plugin.
1130         Fix deleting of SDP records during service updates.
1131         Fix deleting of SDP records when a device is removed.
1132         Fix handling when the SDP record is modified on remote device.
1133         Fix potential buffer overflow by using snprintf instead of sprintf.
1134         Fix const declarations for some storage function parameters.
1135
1136 ver 4.56:
1137         Add missing values from Bluetooth 3.0 specification.
1138         Add proper tracking of device paired status.
1139         Fix tracking of devices without permanently stored link key.
1140         Fix issue with link key removal after connection failures.
1141         Fix legacy pairing information based on remote host features.
1142         Fix off-by-one issue with AVDTP capability parsing.
1143         Fix AVRCP, AVCTP, AVDTP, A2DP and HFP version numbers.
1144         Fix agent canceling before calling agent_destroy.
1145         Fix service record parsing with an empty UUID list.
1146         Fix various SDP related memory leaks.
1147
1148 ver 4.55:
1149         Add support for POSIX capabilities dropping.
1150         Add special quirk for the Nokia CK-20W car kit.
1151         Fix error code handling for AVDTP SetConfiguration response.
1152         Fix updating out of range list when RSSI hasn't changed.
1153         Fix various memory leaks and unnecessary error checks.
1154
1155 ver 4.54:
1156         Add introspection interface to output of introspection calls.
1157         Fix stream handling when media transport disconnects prematurely.
1158         Fix command timeout handling when there's no stream.
1159         Fix headset_suspend_stream behavior for invalid states
1160         Fix issue with AVDTP ABORTING state transition.
1161         Fix issue with AVDTP suspend while closing.
1162
1163 ver 4.53:
1164         Fix issue with telephony connection state notifications.
1165         Fix AVDTP stream leak for invalid media transport config.
1166         Fix audio connection authorization handling with timeouts.
1167         Fix race condition in authorizing audio connections.
1168         Fix device authorized setting for AVRCP-only connections.
1169         Fix duplicate attempts from device to connect signal channel.
1170
1171 ver 4.52:
1172         Add AVCTP support to test utility.
1173         Fix AVDTP Abort when transport closes before response.
1174         Fix authorization when the audio profiles are slow to connect.
1175         Fix potential AVDTP reference leaks.
1176
1177 ver 4.51:
1178         Add utility for basic AVDTP testing.
1179         Add support for configuring L2CAP FCS option.
1180         Fix discovery mode for CUPS 1.4.x and later.
1181         Fix global state tracking of audio service.
1182         Fix last issues with the new build system.
1183
1184 ver 4.50:
1185         Fix issue with missing manual pages in distribution.
1186         Fix issue with the configuration and state directories.
1187         Fix issue with creating include directory.
1188         Fix dependencies of include file generation.
1189
1190 ver 4.49:
1191         Add simple test program for basic GAP testing.
1192         Add support for confirmation requests to agent example.
1193         Add support for full non-recursive build.
1194         Add five millisecond delay for Simple Pairing auto-accept.
1195         Fix Class of Device setting when InitiallyPowered=false.
1196
1197 ver 4.48:
1198         Add library function for comparing UUID values.
1199         Add support for creating all plugins as builtins.
1200         Add support for async handling of service class changes.
1201         Add support for source interface to audio IPC.
1202         Fix device name settings when device is off or down.
1203         Fix issue with enabled SCO server when not necessary.
1204         Fix missing D-Bus access policy for CUPS backend.
1205         Fix discovery results of CUPS backend.
1206         Fix initialization handling of Maemo telephony.
1207
1208 ver 4.47:
1209         Add support for RFKILL unblock handling.
1210         Add support for serial proxy configurations.
1211         Add support for caching service class updates.
1212         Fix issues with updating SDP service records.
1213         Fix usage of limited discoverable mode.
1214         Remove deprecated methods and signals for AudioSource.
1215
1216 ver 4.46:
1217         Add support for A2DP sink role.
1218         Fix clearing svc_cache before the adapter is up.
1219         Fix various pointer after free usages.
1220         Fix various memory leaks.
1221
1222 ver 4.45:
1223         Fix UDEV_DATADIR fallback if pkg-config fails.
1224         Fix adapter cleanup and setup prototypes.
1225         Fix double-free with out-of-range devices.
1226         Fix inband ring setting to be per-headset.
1227         Fix handling of Maemo CSD startup.
1228
1229 ver 4.44:
1230         Add some missing manual pages.
1231         Fix missing number prefix when installing udev rules.
1232         Fix program prefix used in Bluetooth udev rules.
1233         Fix three-way calling indicator order.
1234         Fix downgrade/upgrade of callheld indicator.
1235         Fix +CIEV sending when indicator value changes.
1236         Fix signal handling for Maemo telephony driver.
1237         Fix parsing issues with messages from Maemo CSD.
1238         Fix issue with duplicate active calls.
1239
1240 ver 4.43:
1241         Add support for udev based on-demand startup.
1242         Fix verbose error reporting of CUPS backend.
1243         Fix various string length issues.
1244         Fix issues with Maemo telephony driver.
1245         Fix another device setup and temporary flag issue.
1246         Fix and update example agent implementation.
1247
1248 ver 4.42:
1249         Add TI WL1271 to Texas Instruments chip list.
1250         Add special udev mode to bluetoothd.
1251         Fix regression when there is no agent registered.
1252         Fix error return when bonding socket hang up.
1253         Fix SCO server socket for HFP handsfree role.
1254         Fix shutdown on SCO socket before closing.
1255         Fix shutdown on A2DP audio stream channel before closing.
1256         Fix issue with asserting on AVDTP reference count bugs.
1257         Fix authorization denied issue with certain headsets.
1258         Fix AVRCP UNITINFO and SUBUNIT INFO responses.
1259         Fix discovery cancel issues in case SDP discovery fails.
1260
1261 ver 4.41:
1262         Fix pairing even if the ACL gets dropped before successful SDP.
1263         Fix regression which caused device to be removed after pairing.
1264         Fix HSP record fetching when remote device doesn't support it.
1265         Fix SDP discovery canceling when clearing hs->pending.
1266         Fix headset never connecting on the first attempt.
1267         Fix headset state tracking if bt_search_service() fails.
1268         Fix maximum headset connection count check.
1269         Fix AVDTP Discover timeout handling.
1270         Fix also UI_SET_KEYBIT for the new pause and play key codes.
1271
1272 ver 4.40:
1273         Add telephony driver for oFono telephony stack.
1274         Add support for Dell specific HID proxy switching.
1275         Add support for running hid2hci from udev.
1276         Add mapping for AVRCP Play and Pause to dedicated key codes.
1277         Fix AVRCP keycodes to better match existing X keymap support.
1278         Fix various quoting issues within telephony support.
1279         Fix memory allocation issue when generating PDUs for SDP.
1280         Fix race condition on device removal.
1281         Fix non-cancelable issue with CreateDevice method.
1282         Fix non-working CancelDiscovery method call.
1283
1284 ver 4.39:
1285         Add workaround for dealing with unknown inquiry complete.
1286         Fix discovering when using software scheduler.
1287         Fix wrong NoInputNoOutput IO capability string.
1288         Fix race condition with agent during pairing.
1289         Fix agent cancellation for security mode 3 acceptor failure.
1290         Fix temporary flag removal when device creation fails.
1291         Fix hciattach to use ppoll instead of poll.
1292         Fix service class update when adapter is down.
1293         Fix service classes race condition during startup.
1294         Fix release of audio client before freeing the device.
1295
1296 ver 4.38:
1297         Add support for builtin plugins.
1298         Add framework for adapter operations.
1299         Add constants for Enhanced Retransmission modes.
1300         Fix HCI socket leak in device_remove_bonding.
1301         Fix various format string issues.
1302         Fix crashes with various free functions.
1303         Fix issues with Headset and A2DP drivers to load again.
1304         Fix sending AVRCP button released passthrough messages
1305         Fix bug which prevent input devices to work after restart.
1306         Fix issue with interpretation of UUID-128 as channel.
1307
1308 ver 4.37:
1309         Add version value for Bluetooth 3.0 devices.
1310         Add additional L2CAP extended feature mask bits.
1311         Add support for loading plugins in priority order.
1312         Add support for more detailed usage of disconnect watches.
1313         Add support for AVRCP volume control.
1314         Add saturated clipping of SBC decoder output to 16-bit.
1315         Fix potentially infinite recursion of adapter_up.
1316         Fix SCO handling in the case of an incoming call.
1317         Fix input service to use confirm callback.
1318         Fix cleanup of temporary device entries from storage.
1319
1320 ver 4.36:
1321         Add proper tracking of AVCTP connect attempts.
1322         Add support to channel pattern in Serial interface.
1323         Fix A2DP sink crash if removing device while connecting.
1324         Fix error handling if HFP indicators aren't initialized.
1325         Fix segfault while handling an incoming SCO connection.
1326         Fix Serial.Disconnect to abort connection attempt.
1327
1328 ver 4.35:
1329         Add support for Handsfree profile headset role.
1330         Add additional checks for open SEIDs from clients.
1331         Fix device removal while audio IPC client is connected.
1332         Fix device removal when an authorization request is pending.
1333         Fix incoming AVDTP connect while authorization in progress.
1334         Fix disconnection timers for audio support.
1335         Fix various potential NULL pointer deferences.
1336         Fix callheld indicator value for multiple calls.
1337         Fix voice number type usage.
1338         Fix GDBus watch handling.
1339
1340 ver 4.34:
1341         Add support for version checks of plugins.
1342         Add support for class property on adapter interface.
1343         Add support for second SDP attempt after connection reset.
1344         Add support for more detailed audio states.
1345         Add support for HFP+A2DP auto connection feature.
1346         Add support for new and improved audio IPC.
1347         Add program for testing audio IPC interface.
1348         Fix various AVDTP qualification related issues.
1349         Fix broken SDP AttributeIdList parsing.
1350         Fix invalid memory access of SDP URL handling.
1351         Fix local class of device race conditions.
1352         Fix issue with periodic inquiry on startup.
1353         Fix missing temporary devices in some situations.
1354         Fix SBC alignment issue for encoding with four subbands.
1355
1356 ver 4.33:
1357         Add Paired property to the DeviceFound signals.
1358         Add support for Headset profile 1.2 version.
1359         Fix broken network configuration when IPv6 is disabled.
1360         Fix network regression that caused disconnection.
1361         Fix SDP truncation of strings with NULL values.
1362         Fix service discovery handling of CUPS helper.
1363
1364 ver 4.32:
1365         Fix broken SDP record handling.
1366         Fix SDP data buffer parsing.
1367         Fix more SDP memory leaks.
1368         Fix read scan enable calls.
1369         Fix A2DP stream handling.
1370
1371 ver 4.31:
1372         Add support for new BtIO helper library.
1373         Fix AVDTP session close issue.
1374         Fix SDP memory leaks.
1375         Fix various uninitialized memory issues.
1376         Fix duplicate signal emissions.
1377         Fix property changes request handling.
1378         Fix class of device storage handling.
1379
1380 ver 4.30:
1381         Add CID field to L2CAP socket address structure.
1382         Fix reset of authentication requirements after bonding.
1383         Fix storing of link keys when using dedicated bonding.
1384         Fix storing of pre-Bluetooth 2.1 link keys.
1385         Fix resetting trust settings on every reboot.
1386         Fix handling of local name changes.
1387         Fix memory leaks in hciconfig and hcitool
1388
1389 ver 4.29:
1390         Use AVRCP version 1.0 for now.
1391         Decrease AVDTP idle timeout to one second.
1392         Delay AVRCP connection when remote device connects A2DP.
1393         Add workaround for AVDTP stream setup with broken headsets.
1394         Add missing three-way calling feature bit for Handsfree.
1395         Fix handsfree callheld indicator updating.
1396         Fix parsing of all AT commands within the buffer.
1397         Fix authentication replies when disconnected.
1398         Fix handling of debug combination keys.
1399         Fix handling of changed combination keys.
1400         Fix handling of link keys when using no bonding.
1401         Fix handling of invalid/unknown authentication requirements.
1402         Fix closing of L2CAP raw socket used for dedicated bonding.
1403
1404 ver 4.28:
1405         Add AVDTP signal fragmentation support.
1406         Add more SBC performance optimizations.
1407         Add more SBC audio quality improvements.
1408         Use native byte order for audio plugins.
1409         Set the adapter alias only after checking the EIR data.
1410         Fix auto-disconnect issue with explicit A2DP connections.
1411         Fix invalid memory access of ALSA plugin.
1412         Fix compilation with -Wsign-compare.
1413
1414 ver 4.27:
1415         Add more SBC optimization (MMX and ARM NEON).
1416         Add BT_SECURITY and BT_DEFER_SETUP definitions.
1417         Add support for deferred connection setup.
1418         Add support for fragmentation of data packets.
1419         Add option to trigger dedicated bonding.
1420         Follow MITM requirements from remote device.
1421         Require MITM for dedicated bonding if capabilities allow it.
1422         Fix IO capabilities for non-pairing and pairing cases.
1423         Fix no-bonding connections in non-bondable mode.
1424         Fix new pairing detection with SSP.
1425         Fix bonding with pre-2.1 devices and newer kernels.
1426         Fix LIAC setting while toggling Pairable property.
1427         Fix device creation for incoming security mode 3 connects.
1428         Fix crash within A2DP with bogus pointer.
1429         Fix issue with sdp_copy_record() function.
1430         Fix crash with extract_des() if sdp_uuid_extract() fails.
1431
1432 ver 4.26:
1433         Use of constant shift in SBC quantization code.
1434         Add possibility to analyze 4 blocks at once in encoder.
1435         Fix correct handling of frame sizes in the encoder.
1436         Fix for big endian problems in SBC codec.
1437         Fix audio client socket to always be non-blocking.
1438         Update telephony support for Maemo.
1439
1440 ver 4.25:
1441         Fix receiving data over the audio control socket.
1442         Fix subbands selection for joint-stereo in SBC encoder.
1443         Add new SBC analysis filter function.
1444
1445 ver 4.24:
1446         Fix signal emissions when removing adapters.
1447         Fix missing adapter signals on exit.
1448         Add support for bringing adapters down on exit.
1449         Add support for RememberPowered option.
1450         Add support for verbose compiler warnings.
1451         Add more options to SBC encoder.
1452
1453 ver 4.23:
1454         Update audio IPC for better codec handling.
1455         Fix bitstream optimization for SBC encoder.
1456         Fix length header values of IPC messages.
1457         Fix multiple coding style violations.
1458         Fix FindDevice to handle temporary devices.
1459         Add configuration option for DeviceID.
1460         Add support for InitiallyPowered option.
1461         Add missing signals for manager properties.
1462         Add telephony support for Maemo.
1463
1464 ver 4.22:
1465         Add deny statements to D-Bus access policy.
1466         Add support for LegacyPairing property.
1467         Add support for global properties.
1468         Add more commands to telephony testing script.
1469         Add sender checks for serial and network interfaces.
1470         Remove deprecated methods and signals from input interface.
1471         Remove deprecated methods and signals from network interface.
1472         Remove OffMode option and always use device down.
1473
1474 ver 4.21:
1475         Fix adapter initialization logic.
1476         Fix adapter setup and start security manager early.
1477         Fix usage issue with first_init variable.
1478
1479 ver 4.20:
1480         Cleanup session handling.
1481         Cleanup mode setting handling.
1482         Fix issue with concurrent audio clients.
1483         Fix issue with HFP/HSP suspending.
1484         Fix AT result code syntax handling.
1485         Add Handsfree support for AT+NREC.
1486         Add PairableTimeout adapter property.
1487
1488 ver 4.19:
1489         Fix installation of manual pages for old daemons.
1490         Fix D-Bus signal emmissions for CreateDevice.
1491         Fix issues with UUID probing.
1492         Fix +BSRF syntax issue.
1493         Add Pairable adapter property.
1494         Add sdp_copy_record() library function.
1495
1496 ver 4.18:
1497         Fix release before close issue with RFCOMM TTYs.
1498         Fix Connected property on input interface.
1499         Fix DeviceFound signals during initial name resolving.
1500         Fix service discovery handling.
1501         Fix duplicate UUID detection.
1502         Fix SBC gain mismatch and decoding handling.
1503         Add more options to SBC encoder and decoder.
1504         Add special any adapter object for service interface.
1505         Add variable prefix to adapter and device object paths.
1506
1507 ver 4.17:
1508         Fix SBC encoder not writing last frame.
1509         Fix missing timer for A2DP suspend.
1510         Add more supported devices to hid2hci utility.
1511         Add additional functionality to Handsfree support.
1512
1513 ver 4.16:
1514         Fix wrong parameter usage of watch callbacks.
1515         Fix parameters for callback upon path removal.
1516         Fix unloading of adapter drivers.
1517
1518 ver 4.15:
1519         Fix various A2DP state machine issues.
1520         Fix some issues with the Handsfree error reporting.
1521         Fix format string warnings with recent GCC versions.
1522         Remove dependency on GModule.
1523
1524 ver 4.14:
1525         Fix types of property arrays.
1526         Fix potential crash with input devices.
1527         Fix PS3 BD remote input event generation.
1528         Allow dynamic adapter driver registration.
1529         Update udev rules.
1530
1531 ver 4.13:
1532         Fix service discovery and UUID handling.
1533         Fix bonding issues with Simple Pairing.
1534         Fix file descriptor misuse of SCO connections.
1535         Fix various memory leaks in the device handling.
1536         Fix AVCTP disconnect handling.
1537         Fix GStreamer modes for MP3 encoding.
1538         Add operator selection to Handsfree support.
1539
1540 ver 4.12:
1541         Fix crash with missing icon value.
1542         Fix error checks of HAL plugin.
1543         Fix SCO server socket cleanup on exit.
1544         Fix memory leaks from DBusPendingCall.
1545         Fix handling of pending authorization requests.
1546         Fix missing protocol UUIDs in record pattern.
1547
1548 ver 4.11:
1549         Change SCO server socket into a generic one.
1550         Add test script for dummy telephony plugin.
1551         Fix uninitialized reply of multiple GetProperties methods.
1552
1553 ver 4.10:
1554         Fix memory leaks with HAL messages.
1555         Add more advanced handsfree features.
1556         Add properties to audio, input and network interfaces.
1557         Stop device discovery timer on device removal.
1558
1559 ver 4.9:
1560         Fix signals for Powered and Discoverable properties.
1561         Fix handling of Alias and Icon properties.
1562         Fix duplicate entries for service UUIDs.
1563
1564 ver 4.8:
1565         Fix retrieving of formfactor value.
1566         Fix retrieving of local and remote extended features.
1567         Fix potential NULL pointer dereference during pairing.
1568         Fix crash with browsing due to a remotely initated pairing.
1569
1570 ver 4.7:
1571         Fix pairing and service discovery logic.
1572         Fix crashes during suspend and resume.
1573         Fix race condition within devdown mode.
1574         Add RequestSession and ReleaseSession methods.
1575         Add Powered and Discoverable properties.
1576         Add Devices property and deprecate ListDevices.
1577         Add workaround for a broken carkit from Nokia.
1578
1579 ver 4.6:
1580         Fix Device ID record handling.
1581         Fix service browsing and storage.
1582         Fix authentication and encryption for input devices.
1583         Fix adapter name initialization.
1584
1585 ver 4.5:
1586         Fix initialization issue with new adapters.
1587         Send HID authentication request without blocking.
1588         Hide the verbose SDP debug behind SDP_DEBUG.
1589         Add extra UUIDs for service discovery.
1590         Add SCO server socket listener.
1591         Add authorization support to service plugin.
1592
1593 ver 4.4:
1594         Add temporary fix for the CUPS compile issue.
1595         Add service-api.txt to distribution.
1596         Mention the variable prefix of an object path
1597
1598 ver 4.3:
1599         Add dummy driver for telephony support.
1600         Add support for discovery sessions.
1601         Add service plugin for external services.
1602         Various cleanups.
1603
1604 ver 4.2:
1605         Avoid memory copies in A2DP write routine.
1606         Fix broken logic with Simple Pairing check and old kernels.
1607         Allow non-bondable and outgoing SDP without agent.
1608         Only remove the bonding for non-temporary devices.
1609         Cleanup various unnecessary includes.
1610         Make more unexported functions static.
1611         Add basic infrastructure for gtk-doc support.
1612
1613 ver 4.1:
1614         Add 30 seconds timeout to BNEP connection setup phase.
1615         Avoid memory copies in A2DP write routine for ALSA.
1616         Make sure to include compat/sdp.h in the distribution.
1617
1618 ver 4.0:
1619         Initial public release.
1620
1621 ver 3.36:
1622         Add init routines for TI BRF chips.
1623         Add extra attributes to the serial port record.
1624         Add example record for headset audio gateway record.
1625         Use Handsfree version 0x0105 for the gateway role.
1626         Fix SDP record registration with specific record handles.
1627         Fix BCSP sent/receive handling.
1628         Fix various includes for cross-compilation.
1629         Allow link mode settings for outgoing connections.
1630         Allow bonding during periodic inquiry.
1631
1632 ver 3.35:
1633         Add two additional company identifiers.
1634         Add UUID-128 support for service discovery.
1635         Fix usage of friendly names for service discovery.
1636         Fix authorization when experiemental is disabled.
1637         Fix uninitialized variable in passkey request handling.
1638         Enable output of timestamps for l2test and rctest.
1639
1640 ver 3.34:
1641         Replace various SDP functions with safe versions.
1642         Add additional length validation for incoming SDP packets.
1643         Use safe function versions for SDP client handling.
1644         Fix issue with RemoveDevice during discovery procedure.
1645         Fix collect for non-persistent service records.
1646
1647 ver 3.33:
1648         Add functions for reading and writing the link policy settings.
1649         Add definition for authentication requirements.
1650         Add support for handling Simple Pairing.
1651         Add Simple Pairing support to Agent interface.
1652         Add ReleaseMode method to Adapter interface.
1653         Add DiscoverServices method to Device interface.
1654         Remove obsolete code and cleanup the repository.
1655         Move over to use the libgdbus API.
1656         Enable PIE by default if supported.
1657
1658 ver 3.32:
1659         Add OCF constants for synchronous flow control enabling.
1660         Add support for switching HID proxy devices from Dell.
1661         Add more Bluetooth client/server helper functions.
1662         Add support for input service idle timeout option.
1663         Fix BNEP reconnection handling.
1664         Fix return value for snd_pcm_hw_params() calls.
1665         Use upper-case addresses for object paths.
1666         Remove HAL support helpers.
1667         Remove inotify support.
1668         Remove service daemon activation handling.
1669         Remove uneeded D-Bus API extension.
1670
1671 ver 3.31:
1672         Create device object for all pairing cases.
1673         Convert authorization to internal function calls.
1674         Add initial support for Headset Audio Gateway role.
1675         Add generic Bluetooth helper functions for GLib.
1676         Fix endiannes handling of connection handles.
1677         Don't optimize when debug is enabled.
1678
1679 ver 3.30:
1680         Convert audio service into a plugin.
1681         Convert input service into a plugin.
1682         Convert serial service into a plugin.
1683         Convert network service into a plugin.
1684         Emit old device signals when a property is changed.
1685         Fix missing DiscoverDevices and CancelDiscovery methods.
1686         Add another company identifier.
1687         Add basic support for Bluetooth sessions.
1688         Add avinfo utility for AVDTP/A2DP classification.
1689         Remove build option for deprecated sdpd binary.
1690
1691 ver 3.29:
1692         Introduce new D-Bus based API.
1693         Add more SBC optimizations.
1694         Add support for PS3 remote devices.
1695         Fix alignment trap in SDP server.
1696         Fix memory leak in sdp_get_uuidseq_attr function.
1697
1698 ver 3.28:
1699         Add support for MCAP UUIDs.
1700         Add support for role switch for audio service.
1701         Add disconnect timer for audio service.
1702         Add disconnect detection to ALSA plugin.
1703         Add more SBC optimizations.
1704         Fix alignment issue of SDP server.
1705         Remove support for SDP parsing via expat.
1706
1707 ver 3.27:
1708         Update uinput.h with extra key definitions.
1709         Add support for input connect/disconnect callbacks.
1710         Add ifdefs around some baud rate definitions.
1711         Add another company identifier.
1712         Add proper HFP service level connection handling.
1713         Add basic headset automatic disconnect support.
1714         Add support for new SBC API.
1715         Fix SBC decoder noise at high bitpools.
1716         Use 32-bit multipliers for further SBC optimization.
1717         Check for RFCOMM connection state in SCO connect callback.
1718         Make use of parameters selected in ALSA plugin.
1719
1720 ver 3.26:
1721         Fix compilation issues with UCHAR_MAX, USHRT_MAX and UINT_MAX.
1722         Improve handling of different audio transports.
1723         Enable services by default and keep old daemons disabled.
1724
1725 ver 3.25:
1726         Add limited support for Handsfree profile.
1727         Add limited support for MPEG12/MP3 codec.
1728         Add basic support for UNITINFO and SUBUNITINFO.
1729         Add more SBC optimizations.
1730         Fix external service (un)registration.
1731         Allow GetInfo and GetAddress to fail.
1732
1733 ver 3.24:
1734         Add definitions for MDP.
1735         Add TCP connection support for serial proxy.
1736         Add fix for Logitech HID proxy switching.
1737         Add missing macros, MIN, MAX, ABS and CLAMP.
1738         Add more SBC encoder optimizations.
1739         Add initial mechanism to handle headset commands.
1740         Fix connecting to handsfree profile headsets.
1741         Use proper function for checking signal name.
1742
1743 ver 3.23:
1744         Fix remote name request handling bug.
1745         Fix key search function to honor the mmap area size.
1746         Fix Avahi integration of network service.
1747         Add new plugin communication for audio service.
1748         Enable basic AVRCP support by default.
1749         More optimizations to the SBC library.
1750         Create common error definitions.
1751
1752 ver 3.22:
1753         Add missing include file from audio service.
1754         Add SBC conformance test utility.
1755         Add basic uinput support for AVRCP.
1756         Fix L2CAP socket leak in audio service.
1757         Fix buffer usage in GStreamer plugin.
1758         Fix remote name request event handling.
1759
1760 ver 3.21:
1761         Add constant for Bluetooth socket options level.
1762         Add initial AVRCP support.
1763         Add A2DP sink support to GStreamer plugin.
1764         Fix interoperability with A2DP suspend.
1765         Fix sign error in 8-subband encoder.
1766         Fix handling of service classes length size.
1767         Store Extended Inquiry Response data information.
1768         Publish device id information through EIR.
1769         Support higher baud rates for Ericcson based chips.
1770
1771 ver 3.20:
1772         Fix GStreamer plugin file type detection.
1773         Fix potential infinite loop in inotify support.
1774         Fix D-Bus signatures for dict handling.
1775         Fix issues with service activation.
1776         Fix SDP failure handling of audio service.
1777         Fix various memory leaks in input service.
1778         Add secure device creation method to input service.
1779         Add service information methods to serial service.
1780         Add config file support to network service.
1781         Add scripting capability to network service.
1782         Add special on-mode handling.
1783         Add optimization for SBC encoder.
1784         Add tweaks for D-Bus 1.1.x libraries.
1785         Add support for inquiry transmit power level.
1786
1787 ver 3.19:
1788         Limit range of bitpool announced while in ACP side.
1789         Use poll instead of usleep to wait for worker thread.
1790         Use default event mask from the specification.
1791         Add L2CAP mode constants.
1792         Add HID proxy support for Logitech diNovo Edge dongle.
1793         Add refresh option to re-request device names.
1794         Show correct connection link type.
1795
1796 ver 3.18:
1797         Don't allocate memory for the Bluetooth base UUID.
1798         Implement proper locking for headsets.
1799         Fix various A2DP SEP locking issues.
1800         Fix and cleanup audio stream handling.
1801         Fix stream starting if suspend request is pending.
1802         Fix A2DP and AVDTP endianess problems.
1803         Add network timeout and retransmission support.
1804         Add more detailed decoding of EIR elements.
1805
1806 ver 3.17:
1807         Fix supported commands bit calculation.
1808         Fix crashes in audio and network services.
1809         Check PAN source and destination roles.
1810         Only export the needed symbols for the plugins.
1811
1812 ver 3.16:
1813         Update company identifier list.
1814         Add support for headsets with SCO audio over HCI.
1815         Add support for auto-create through ALSA plugin.
1816         Add support for ALSA plugin parameters.
1817         Add GStreamer plugin with SBC decoder and encoder.
1818         Fix network service NAP, GN and PANU servers.
1819         Set EIR information from SDP database.
1820
1821 ver 3.15:
1822         Add A2DP support to the audio service.
1823         Add proxy support to the serial service.
1824         Extract main service class for later use.
1825         Set service classes value from SDP database.
1826
1827 ver 3.14:
1828         Add missing signals for the adapter interface.
1829         Add definitions and functions for Simple Pairing.
1830         Add basic commands for Simple Pairing.
1831         Add correct Simple Pairing and EIR interaction.
1832         Add missing properties for remote information.
1833         Add EPoX endian quirk to the input service.
1834         Fix HID descriptor import and storage functions.
1835         Fix handling of adapters in raw mode.
1836         Fix remote device listing methods.
1837
1838 ver 3.13:
1839         Fix some issues with the headset support.
1840         Fix concurrent pending connection attempts.
1841         Fix usage of devname instead of netdev.
1842         Add identifier for Nokia SyncML records.
1843         Add command for reading the CSR chip revision.
1844         Add generic CSR radio test support.
1845         Update HCI command table.
1846
1847 ver 3.12:
1848         Add missing HCI command text descriptions
1849         Add missing HCI commands structures.
1850         Add missing HCI event structures.
1851         Add common bachk() function.
1852         Add support for limited discovery mode.
1853         Add support for setting of event mask.
1854         Add GetRemoteServiceIdentifiers method.
1855         Add skeleton for local D-Bus server.
1856         Add headset gain control methods.
1857         Fix various headset implementation issues.
1858         Fix various serial port service issues.
1859         Fix various input service issues.
1860         Let CUPS plugin discover printers in range.
1861         Improve the BCM2035 UART init routine.
1862         Ignore connection events for non-ACL links.
1863
1864 ver 3.11:
1865         Update API documentation.
1866         Minimize SDP root records and browse groups.
1867         Use same decoder for text and URL strings.
1868         Fix URL data size handling.
1869         Fix SDP pattern extraction for XML.
1870         Fix network connection persistent state.
1871         Add network connection helper methods.
1872         Add initial version of serial port support.
1873         Add class of device tracking.
1874
1875 ver 3.10.1:
1876         Add option to disable installation of manual pages.
1877         Fix input service encryption setup.
1878         Fix serial service methods.
1879         Fix network service connection handling.
1880         Provide a simple init script.
1881
1882 ver 3.10:
1883         Add initial version of network service.
1884         Add initial version of serial service.
1885         Add initial version of input service.
1886         Add initial version of audio service.
1887         Add authorization framework.
1888         Add integer based SBC library.
1889         Add version code for Bluetooth 2.1 specification.
1890         Add ESCO_LINK connection type constant.
1891         Export sdp_uuid32_to_uuid128() function.
1892
1893 ver 3.9:
1894         Add RemoteDeviceDisconnectRequested signal.
1895         Add updated service framework.
1896         Add embedded GLib library.
1897         Add support for using system GLib library.
1898         Create internal SDP server library.
1899
1900 ver 3.8:
1901         Sort discovered devices list based on their RSSI.
1902         Send DiscoverableTimeoutChanged signal.
1903         Fix local and remote name validity checking.
1904         Add ListRemoteDevices and ListRecentRemoteDevices methods.
1905         Add basic integration of confirmation concept.
1906         Add support for service record description via XML.
1907         Add support for external commands to the RFCOMM utility.
1908         Add experimental service and authorization API.
1909         Add functions for registering binary records.
1910
1911 ver 3.7:
1912         Fix class of device handling.
1913         Fix error replies with pairing and security mode 3.
1914         Fix disconnect method for RFCOMM connections.
1915         Add match pattern for service searches.
1916         Add support for prioritized watches.
1917         Add additional PDU length checks.
1918         Fix CSRC value for partial responses.
1919
1920 ver 3.6.1:
1921         Fix IO channel race conditions.
1922         Fix pairing issues on big endian systems.
1923         Fix pairing issues with page timeout errors.
1924         Fix pairing state for security mode 3 requests.
1925         Switch to user as default security manager mode.
1926
1927 ver 3.6:
1928         Update D-Bus based RFCOMM interface support.
1929         Use L2CAP raw sockets for HCI connection creation.
1930         Add periodic discovery support to the D-Bus interface.
1931         Add initial support for device names via EIR.
1932         Add proper UTF-8 validation of device names.
1933         Add support for the J-Three keyboard.
1934         Fix issues with the asynchronous API for SDP.
1935
1936 ver 3.5:
1937         Fix and cleanup watch functionality.
1938         Add support for periodic inquiry mode.
1939         Add support for asynchronous SDP requests.
1940         Add more request owner tracking.
1941         Add asynchronous API for SDP.
1942         Document pageto and discovto options.
1943
1944 ver 3.4:
1945         Improve error reporting for failed HCI commands.
1946         Improve handling of CancelBonding.
1947         Fixed bonding reply message when disconnected.
1948         Fix UUID128 string lookup handling.
1949         Fix malloc() versus bt_malloc() usage.
1950
1951 ver 3.3:
1952         Don't change inquiry mode for Bluetooth 1.1 adapters.
1953         Add udev rules for Bluetooth serial PCMCIA cards.
1954         Add Cancel and Release methods for passkey agents.
1955         Add GetRemoteClass method.
1956         Convert to using ppoll() and pselect().
1957         Initialize allocated memory to zero.
1958         Remove bcm203x firmware loader.
1959         Remove kernel specific timeouts.
1960         Add additional private data field for SDP sessions.
1961         Add host controller to host flow control defines.
1962         Add host number of completed packets defines.
1963         Initialize various memory to zero before usage.
1964
1965 ver 3.2:
1966         Only check for the low-level D-Bus library.
1967         Update possible device minor classes.
1968         Fix timeout for pending reply.
1969         Add more Inquiry with RSSI quirks.
1970         Sleep only 100 msecs for device detection.
1971         Don't send BondingCreated on link key renewal.
1972         Allow storing of all UTF-8 remote device names.
1973         Create storage filenames with a generic function.
1974         Fix handling of SDP strings.
1975         Add adapter type for SDIO cards.
1976         Add features bit for link supervision timeout.
1977
1978 ver 3.1:
1979         Add missing placeholders for feature bits.
1980         Fix handling of raw mode devices.
1981         Fix busy loop in UUID extraction routine.
1982         Remove inquiry mode setting.
1983         Remove auth and encrypt settings.
1984
1985 ver 3.0:
1986         Implement the new BlueZ D-Bus API.
1987         Fix broken behavior with EVT_CMD_STATUS.
1988         Add features bit for pause encryption.
1989         Add additional EIR error code.
1990         Add more company identifiers.
1991         Add another Phonebook Access identifier.
1992         Update sniff subrating data structures.
1993
1994 ver 2.25:
1995         Use %jx instead of %llx for uint64_t and int64_t.
1996         Allow null-terminated text strings.
1997         Add UUID for N-Gage games.
1998         Add UUID for Apple Macintosh Attributes.
1999         Add Apple attributes and iSync records.
2000         Add definitions for Apple Agent.
2001         Add support for the Handsfree Audio Gateway service.
2002         Add support for choosing a specific record handle.
2003         Add support for dialup/telephone connections.
2004         Add definitions for Apple Agent.
2005         Add support for record handle on service registration.
2006
2007 ver 2.24:
2008         Fix display of SDP text and data strings.
2009         Add support for device scan property.
2010         Add support for additional access protocols.
2011         Update the D-Bus policy configuration file.
2012
2013 ver 2.23:
2014         Update the new D-Bus interface.
2015         Make dfutool ready for big endian architectures.
2016         Add support for AVRCP specific service records.
2017         Add support for writing complex BCCMD commands.
2018         Add the new BCCMD interface utility.
2019         Add MicroBCSP implementation from CSR.
2020         Add constants and definitions for sniff subrating.
2021         Add support for allocation of binary text elements.
2022         Add HCI emulation tool.
2023         Add fake HID support for old EPoX presenters.
2024         Reject connections from unknown HID devices.
2025         Fix service discovery deadlocks with Samsung D600 phones.
2026
2027 ver 2.22:
2028         Remove D-Bus 0.23 support.
2029         Add initial version of the new D-Bus interface.
2030         Add support for extended inquiry response commands.
2031         Add support for the Logitech diNovo Media Desktop Laser.
2032         Add compile time buffer checks (FORTIFY SOURCE).
2033         Decode reserved LMP feature bits.
2034         Fix errno overwrite problems.
2035         Fix profile descriptor problem with Samsung phones.
2036
2037 ver 2.21:
2038         Move create_dirs() and create_file() into the textfile library.
2039         Let textfile_put() also replace the last key value pair.
2040         Fix memory leaks with textfile_get() usage.
2041         Fix infinite loops and false positive matches.
2042         Don't retrieve stored link keys for RAW devices.
2043         Document the putkey and delkey commands.
2044         Show supported commands also in clear text.
2045         Support volatile changes of the BD_ADDR for CSR chips.
2046         Add support for identification of supported commands.
2047         Add missing OCF declarations for the security filter.
2048         Add two new company identifiers.
2049
2050 ver 2.20:
2051         Add UUIDs for video distribution profile.
2052         Add UUIDs for phonebook access profile.
2053         Add attribute identifier for supported repositories.
2054         Add definitions for extended inquiry response.
2055         Add functions for extended inquiry response.
2056         Add support for extended inquiry response.
2057         Add support for HotSync service record.
2058         Add support for ActiveSync service record.
2059         Add ActiveSync networking support.
2060         Fix D-Bus crashes with new API versions.
2061
2062 ver 2.19:
2063         Fix the GCC 4.0 warnings.
2064         Fix the routing for dealing with raw devices.
2065         Fix off by one memory allocation error.
2066         Fix security problem with escape characters in device name.
2067         Add per device service record functions.
2068         Send D-Bus signals for inquiry results and remote name resolves.
2069         Add support for device specific SDP records.
2070
2071 ver 2.18:
2072         Support D-Bus 0.23 and 0.33 API versions.
2073         Support reading of complex BCCMD values.
2074         Support minimum and maximum encryption key length.
2075         Add support for reading and writing the inquiry scan type.
2076         Add definitions for connection accept timeout and scan enable.
2077         Add support for inquiry scan type.
2078         Add tool for the CSR BCCMD interface.
2079         Add first draft of the Audio/Video control utility.
2080         Add disconnect timer support for the A2DP ALSA plugin.
2081         Make SBC parameters configurable.
2082         Replace non-printable characters in device names.
2083         Remove hci_vhci.h header file.
2084         Remove hci_uart.h header file.
2085
2086 ver 2.17:
2087         Set the storage directory through ${localstatedir}.
2088         Add the textfile library for ASCII based file access.
2089         Add support for return link keys event.
2090         Add support for voice setting configuration.
2091         Add support for page scan timeout configuration.
2092         Add support for storing and deleting of stored link keys.
2093         Add support for searching for services with UUID-128.
2094         Add support for retrieving all possible service records.
2095         Add support for a raw mode view of service records.
2096         Add support for HID information caching in hidd.
2097         Add support for authentication in pand and dund.
2098         Add support for changing BD_ADDR of CSR chips.
2099         Add pskey utility for changing CSR persistent storage values.
2100         Add the firmware upgrade utility.
2101         Add connection caching for the A2DP ALSA plugin.
2102         Add functions for stored link keys.
2103         Add definitions for PIN type and unit key.
2104         Add SDP_WAIT_ON_CLOSE flag for sdp_connect().
2105         Include stdio.h in bluetooth.h header file.
2106         Include sys/socket.h in the header files.
2107
2108 ver 2.16:
2109         Store link keys in ASCII based file format.
2110         Support device name caching.
2111         Support zero length data sizes in l2test.
2112         Change default l2ping data size to 44 bytes.
2113         Hide the server record and the public browse group root.
2114         Read BD_ADDR if not set and if it is a raw device.
2115         Add SDP language attributes.
2116         Add support for browsing the L2CAP group.
2117         Add support for stored pin codes for outgoing connections.
2118         Add support for local commands and extended features.
2119         Add support for reading CSR panic and fault codes.
2120         Add config option for setting the inquiry mode.
2121         Add OUI decoding support.
2122         Use unlimited inquiry responses as default.
2123         Use cached device names for PIN request.
2124         Use the clock offset when getting the remote names.
2125         Add function for reading local supported commands.
2126         Add function for reading local extended features.
2127         Add function for reading remote extended features.
2128         Add function for getting the remote name with a clock offset.
2129         Add function for extracting the OUI from a BD_ADDR.
2130         Add inquiry info structure with RSSI and page scan mode.
2131         Fix buffer allocation for features to string conversion.
2132         Support inquiry with unlimited number of responses.
2133
2134 ver 2.15:
2135         Enable the RFCOMM service level security.
2136         Add deprecated functions for reading the name.
2137         Add command for reading the clock offset.
2138         Add command for reading the clock.
2139         Add function for reading the clock.
2140         Add function for reading the local Bluetooth address.
2141         Add function for reading the local supported features.
2142         Don't configure raw devices.
2143         Don't set inquiry scan or page scan on raw devices.
2144         Don't show extended information for raw devices.
2145         Support L2CAP signal sizes bigger than 2048 bytes.
2146         Cleanup of the socket handling code of the test programs.
2147         Use better way for unaligned access.
2148         Remove sdp_internal.h and its usage.
2149
2150 ver 2.14:
2151         Make use of additional connection information.
2152         Use library function for reading the RSSI.
2153         Use library function for reading the link quality.
2154         Use library function for reading the transmit power level.
2155         Use library functions for the link supervision timeout.
2156         Add tool for changing the device address.
2157         Add function for reading the RSSI.
2158         Add function for reading the link quality.
2159         Add function for reading the transmit power level.
2160         Add functions for the link supervision timeout.
2161         Remove deprecated functions.
2162         Update AM_PATH_BLUEZ macro.
2163
2164 ver 2.13:
2165         Use file permission 0600 for the link key file.
2166         Add support for HID attribute descriptions.
2167         Add support for Device ID attributes.
2168         Add Device ID and HID attribute definitions.
2169         Update the UUID constants and its translations.
2170         Update L2CAP socket option definitions.
2171         Update connection information definitions.
2172         Various whitespace cleanups.
2173
2174 ver 2.12:
2175         Inherit the device specific options from the default.
2176         Use --device for selecting the source device.
2177         Add --nosdp option for devices with resource limitation.
2178         Add support and parameter option for secure mode.
2179         Add a lot of build ids and hardware revisions.
2180         Add service classes and profile ids for WAP.
2181         Add simple AM_PATH_BLUEZ macro.
2182         Update UUID translation tables.
2183         Correct kernel interface for CMTP and HIDP support.
2184
2185 ver 2.11:
2186         Initial support for the kernel security manager.
2187         Various cleanups to avoid inclusion of kernel headers.
2188         Fix output when the CUPS backend is called without arguments.
2189         Fix problems with a 64 bit userland.
2190         Use Bluetooth library functions if available.
2191         Use standard numbering scheme of SDP record handles.
2192         Use bit zero for vendor packets in the filter type bitmask.
2193         Add SIM Access types for service discovery.
2194         Add more audio/video profile translations.
2195         Add another company identifier.
2196         Add the missing HCI error codes.
2197         Add RFCOMM socket options.
2198         Add definition for the SECURE link mode.
2199         Add functions for reading and writing the inquiry mode.
2200         Add functions for AFH related settings and information.
2201         Add version identifier for the Bluetooth 2.0 specification.
2202         Add a master option to the hidd.
2203         Add support for changing the link key of a connection.
2204         Add support for requesting encryption on keyboards.
2205         Add support for revision information of Digianswer devices.
2206         Add support for the Zoom, IBM and TDK PCMCIA cards.
2207         Add checks for the OpenOBEX and the ALSA libraries.
2208         Add experimental mRouter support.
2209
2210 ver 2.10:
2211         Use a define for the configuration directory.
2212         Fix string initialization for flags translation.
2213         Fix and extend the unaligned access macros.
2214         Make compiling with debug information optional.
2215         Don't override CFLAGS from configure.
2216         Check for usb_get_busses() and usb_interrupt_read().
2217         Add optional support for compiling with PIE.
2218         Make installation of the init scripts optional.
2219         Make compiling with debug information optional.
2220         Don't override CFLAGS from configure.
2221
2222 ver 2.9:
2223         Retry SDP connect if busy in the CUPS backend.
2224         Use packet type and allow role switch in hcitool.
2225         Use the functions from the USB library for hid2hci.
2226         Add Broadcom firmware loader.
2227         Add EPoX endian quirk for buggy keyboards.
2228         Add L2CAP info type and info result definitions.
2229         Add value for L2CAP_CONF_RFC_MODE.
2230         Change RSSI value to signed instead of unsigned.
2231         Allow UUID32 values as protocol identifiers.
2232         Update the autoconf/automake scripts.
2233
2234 ver 2.8:
2235         Use LIBS and LDADD instead of LDFLAGS.
2236         Use HIDP subclass field for HID boot protocol.
2237         Set olen before calling getsockopt() in pand.
2238         Restore signals for dev-up script.
2239         Add PID file support for pand.
2240         Add size parameter to expand_name() in hcid.
2241         Add support for audio source and audio sink SDP records.
2242         Add support for HID virtual cable unplug.
2243         Add support for AmbiCom BT2000C card.
2244         Add defines and UUID's for audio/video profiles.
2245         Add AVDTP protocol identifier.
2246         Add HIDP subclass field.
2247         Add PKGConfig support.
2248         Fix the event code of inquiry with RSSI.
2249         Remove dummy SDP library.
2250
2251 ver 2.7:
2252         Fix display of decoded LMP features.
2253         Update company identifiers.
2254         Add AFH related types.
2255         Add first bits from EDR prototyping specification.
2256         Add support for inquiry with RSSI.
2257         Add HCRP related SDP functions.
2258         Add HIDP header file.
2259         Add support for getting the AFH channel map.
2260         Add support for AFH mode.
2261         Add support for inquiry mode.
2262         Add Bluetooth backend for CUPS.
2263         Add the hid2hci utility.
2264         Add the hidd utility.
2265         Add the pand utility.
2266         Add the dund utility.
2267         More endian bug fixes.
2268         Give udev some time to create the RFCOMM device nodes.
2269         Release the TTY if no device node is found.
2270         New startup script for the Bluetooth subsystem.
2271         Update to the autoconf stuff.
2272
2273 ver 2.6:
2274         Change default prefix to /usr.
2275         Add manpages for hcid and hcid.conf.
2276         Add the sdpd server daemon.
2277         Add the sdptool utility.
2278         Add the ciptool utility.
2279         Add new company identifiers.
2280         Add BNEP and CMTP header files.
2281         Add the SDP library.
2282         Use R2 for default value of pscan_rep_mode.
2283
2284 ver 2.5:
2285         Add decoding of Bluetooth 1.2 features.
2286         Add link manager version parameter for Bluetooth 1.2.
2287         Add new company identifiers.
2288         Add D-Bus support for PIN request.
2289         Support for transmit power level.
2290         Support for park, sniff and hold mode.
2291         Support for role switch.
2292         Support for reading the clock offset.
2293         Support for requesting authentication.
2294         Support for setting connection encryption.
2295         Show revision information for Broadcom devices.
2296         Replace unprintable characters in device name.
2297         Use R1 for default value of pscan_rep_mode.
2298         Fix some 64-bit problems.
2299         Fix some endian problems.
2300         Report an error on PIN helper failure.
2301         Update bluepin script for GTK2.
2302
2303 ver 2.4:
2304         Increase number of inquiry responses.
2305         Support for transmit power level.
2306         Display all 8 bytes of the features.
2307         Add support for reading and writing of IAC.
2308         Correct decoding class of device.
2309         Use Ericsson revision command for ST Microelectronics devices.
2310         Display AVM firmware version with 'revision' command.
2311         New code for CSR specific revision information.
2312         Support for ST Microelectronics specific initialization.
2313         Support for 3Com card version 3.0.
2314         Support for TDK, IBM and Socket cards.
2315         Support for initial baud rate.
2316         Update man pages.
2317         Fixes for some memory leaks.
2318
2319 ver 2.3:
2320         Added const qualifiers to appropriate function arguments.
2321         Minor fixes.
2322         CSR firmware version is now displayed by 'revision' command.
2323         Voice command is working properly on big endian machines.
2324         Added support for Texas Bluetooth modules.
2325         Added support for high UART baud rates on Ericsson modules.
2326         BCSP initialization fixes.
2327         Support for role switch command (hcitool).
2328         RFCOMM config file parser fixes.
2329         Update man pages.
2330         Removed GLib dependency.
2331
2332 ver 2.2:
2333         Updated RFCOMM header file.
2334         Additional HCI command and event defines.
2335         Support for voice settings (hciconfig).
2336         Minor hcitool fixes.
2337         Improved configure script.
2338         Added Headset testing tool.
2339         Updated man pages.
2340         RPM package.
2341
2342 ver 2.1.1:
2343         Resurrect hci_remote_name.
2344
2345 ver 2.1:
2346         Added hci_{read, write}_class_of_dev().
2347         Added hci_{read, write}_current_iac_lap().
2348         Added hci_write_local_name().
2349         Added RFCOMM header file.
2350         Minor fixes.
2351         Improved BCSP initialization (hciattach).
2352         Support for displaying link quality (hcitool).
2353         Support for changing link supervision timeout (hcitool).
2354         New RFCOMM TTY configuration tool (rfcomm).
2355         Minor fixes and updates.
2356
2357 ver 2.0:
2358         Additional company IDs.
2359         BCSP initialization (hciattach).
2360         Minor hciconfig fixes.
2361
2362 ver 2.0-pr13:
2363         Support for multiple pairing modes.
2364         Link key database handling fixes.
2365
2366 ver 2.0-pre12:
2367         Removed max link key limit. Keys never expire.
2368         Link key database is always updated. Reread PIN on SIGHUP (hcid).
2369         Bluetooth script starts SDPd, if installed.
2370         Other minor fixes.
2371
2372 ver 2.0-pre11:
2373         Improved link key management and more verbose logging (hcid).
2374         Fixed scan command (hcitool).
2375
2376 ver 2.0-pre10:
2377         Fix hci_inquiry function to return errors and accept user buffers.
2378         New functions hci_devba, hci_devid, hci_for_each_dev and hci_get_route.
2379         Additional company IDs.
2380         Makefile and other minor fixes.
2381         Support for reading RSSI, remote name and changing
2382         connection type (hcitool). 
2383         Device initialization fixes (hcid).
2384         Other minor fixes and improvements.
2385         Build environment cleanup and fixes.
2386
2387 ver 2.0-pre9:
2388         Improved bluepin. Working X authentication.
2389         Improved hcitool. New flexible cmd syntax, additional commands.
2390         Human readable display of the device features.
2391         LMP features to string translation support.
2392         Additional HCI command and event defines.
2393         Extended hci_filter API.
2394
2395 ver 2.0-pre8:
2396         Additional HCI ioctls and defines.
2397         All strings and buffers are allocated dynamically.
2398         ba2str, str2ba automatically swap bdaddress.
2399         Additional hciconfig commands. Support for ACL and SCO MTU ioctls.
2400         Support for Inventel and COM1 UART based devices.
2401         Minor hcitool fixes.
2402         Improved l2test. New L2CAP test modes.
2403         Minor fixes and cleanup.
2404
2405 ver 2.0-pre7:
2406         Bluetooth libraries and header files is now a separate package.
2407         New build environment uses automake and libtool.
2408         Massive header files cleanup.
2409         Bluetooth utilities is now a separate package.
2410         New build environment uses automake.
2411         Moved all config files and security data to /etc/bluetooth.
2412         Various cleanups.
2413
2414 ver 2.0-pre6:
2415         API cleanup and additions.
2416         Improved hcitool.
2417         l2test minor output fixes.
2418         hciattach opt to display list of supported devices.
2419
2420 ver 2.0-pre4:
2421         HCI filter enhancements.
2422
2423 ver 2.0-pre3:
2424         Cleanup.
2425
2426 ver 2.0-pre2:
2427         Additional HCI library functions.
2428         Improved CSR baud rate initialization.
2429         PCMCIA scripts fixes and enhancements.
2430         Documentation update.
2431
2432 ver 2.0-pre1:
2433         New UART initialization utility.
2434         Hot plugging support for UART based PCMCIA devices.
2435         SCO testing utility.
2436         New authentication utility (bluepin).
2437         Minor fixes and improvements.