$(MAKE) -C $@ all
endif # config.mk
+# ARM relocations should all be R_ARM_RELATIVE.
+checkarmreloc: $(obj)u-boot
+ @if test "R_ARM_RELATIVE" != \
+ "`readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
+ then echo "$< contains relocations other than \
+ R_ARM_RELATIVE"; false; fi
+
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
See Freescale App Note 4493 for more information about
this erratum.
+ CONFIG_A003399_NOR_WORKAROUND
+ Enables a workaround for IFC erratum A003399. It is only
+ requred during NOR boot.
+
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
This is the value to write into CCSR offset 0x18600
according to the A004510 workaround.
+ CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
+ This value denotes start offset of M2 memory
+ which is directly connected to the DSP core.
+
+ CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+ This value denotes start offset of DSP CCSR space.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
CONFIG_SPL_LIBGENERIC_SUPPORT
Support for lib/libgeneric.o in SPL binary
+ CONFIG_SPL_ENV_SUPPORT
+ Support for the environment operating in SPL binary
+
+ CONFIG_SPL_NET_SUPPORT
+ Support for the net/libnet.o in SPL binary.
+ It conflicts with SPL env from storage medium specified by
+ CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE
+
CONFIG_SPL_PAD_TO
Image offset to which the SPL should be padded before appending
the SPL payload. By default, this is defined as
- CONFIG_SRIO2:
Board has SRIO 2 port available
+- CONFIG_SRIO_PCIE_BOOT_MASTER
+ Board can support master function for Boot from SRIO and PCIE
+
- CONFIG_SYS_SRIOn_MEM_VIRT:
Virtual Address of SRIO port 'n' memory region
that is executed before the actual U-Boot. E.g. when
compiling a NAND SPL.
+- CONFIG_SYS_MPC85XX_NO_RESETVEC
+ Only for 85xx systems. If this variable is specified, the section
+ .resetvec is not kept and the section .bootpg is placed in the
+ previous 4k of the .text section.
+
- CONFIG_ARCH_MAP_SYSMEM
Generally U-Boot (and in particular the md command) uses
effective address. It is therefore not necessary to regard
PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
endif
endif
+
+# check that only R_ARM_RELATIVE relocations are generated
+ifneq ($(CONFIG_SPL_BUILD),y)
+ALL-y += checkarmreloc
+endif
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
arch/arm/cpu/arm920t/start.o (.text*)
/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
. = 0x1000;
. = ALIGN(4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
__bss_start = .;
.bss : { *(.bss*) }
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
.bss : {
. = ALIGN(4);
__bss_start = .;
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
.bss : {
. = ALIGN(4);
__bss_start = .;
#endif
return 0;
}
+
+#ifdef CONFIG_SPL_BUILD
+void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+void uart_soft_reset(void)
+{
+ struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+ u32 regval;
+
+ regval = readl(&uart_base->uartsyscfg);
+ regval |= UART_RESET;
+ writel(regval, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regval = readl(&uart_base->uartsyscfg);
+ regval |= UART_SMART_IDLE_EN;
+ writel(regval, &uart_base->uartsyscfg);
+}
+#endif
;
}
-static void mpu_pll_config(void)
+void mpu_pll_config_val(int mpull_m)
{
u32 clkmode, clksel, div_m2;
;
clksel = clksel & (~CLK_SEL_MASK);
- clksel = clksel | ((MPUPLL_M << CLK_SEL_SHIFT) | MPUPLL_N);
+ clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N);
writel(clksel, &cmwkup->clkseldpllmpu);
div_m2 = div_m2 & ~CLK_DIV_MASK;
;
}
+static void mpu_pll_config(void)
+{
+ mpu_pll_config_val(CONFIG_SYS_MPUCLK);
+}
+
static void core_pll_config(void)
{
u32 clkmode, clksel, div_m4, div_m5, div_m6;
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o pinmux.o
+COBJS += clock.o power.o soc.o system.o pinmux.o tzpc.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
/* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
fout = (m + k / 1024) * (freq / (p * (1 << s)));
} else {
- if (s < 1)
- s = 1;
- /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
- fout = m * (freq / (p * (1 << (s - 1))));
+ /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+ fout = m * (freq / (p * (1 << s)));
}
return fout;
(struct exynos4_clock *)samsung_get_base_clock();
unsigned long uclk, sclk;
unsigned int sel, ratio, pre_ratio;
- int shift;
+ int shift = 0;
sel = readl(&clk->src_fsys);
sel = (sel >> (dev_index << 2)) & 0xf;
(struct exynos5_clock *)samsung_get_base_clock();
unsigned long uclk, sclk;
unsigned int sel, ratio, pre_ratio;
- int shift;
+ int shift = 0;
sel = readl(&clk->src_fsys);
sel = (sel >> (dev_index << 2)) & 0xf;
* MA 02111-1307 USA
*/
+#include <common.h>
#include <asm/arch/tzpc.h>
-#include"setup.h"
+#include <asm/io.h>
/* Setting TZPC[TrustZone Protection Controller] */
void tzpc_init(void)
{
struct exynos_tzpc *tzpc;
- unsigned int addr;
+ unsigned int addr, start = 0, end = 0;
- for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+ start = samsung_get_base_tzpc();
+
+ if (cpu_is_exynos5())
+ end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+ else if (cpu_is_exynos4())
+ end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+
+ for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) {
tzpc = (struct exynos_tzpc *)addr;
- if (addr == TZPC0_BASE)
+ if (addr == start)
writel(R0SIZE, &tzpc->r0size);
writel(DECPROTXSET, &tzpc->decprot0set);
writel(DECPROTXSET, &tzpc->decprot1set);
- if (addr != TZPC9_BASE) {
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
- }
+ if (cpu_is_exynos5() && (addr == end))
+ break;
+
+ writel(DECPROTXSET, &tzpc->decprot2set);
+ writel(DECPROTXSET, &tzpc->decprot3set);
}
}
LIB = $(obj)libs5p-common.o
COBJS-y += cpu_info.o
+ifndef CONFIG_SPL_BUILD
COBJS-y += timer.o
COBJS-y += sromc.o
COBJS-$(CONFIG_PWM) += pwm.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
*(.text*)
}
. = ALIGN(4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
_end = .;
.bss __rel_dyn_start (OVERLAY) : {
__bss_end = .;
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
. = ALIGN(4);
.text :
{
- __image_copy_start = .;
+ *(.__image_copy_start)
CPUDIR/start.o (.text*)
*(.text*)
}
. = ALIGN(4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
#address-cells = <1>;
#size-cells = <1>;
};
+
+ mmc@12200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ };
+
+ mmc@12210000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12210000 0x1000>;
+ interrupts = <0 76 0>;
+ };
+
+ mmc@12220000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12220000 0x1000>;
+ interrupts = <0 77 0>;
+ };
+
+ mmc@12230000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12230000 0x1000>;
+ interrupts = <0 78 0>;
+ };
+
};
u32 get_device_type(void);
void save_omap_boot_params(void);
void setup_clocks_for_console(void);
+void mpu_pll_config_val(int mpull_m);
void ddr_pll_config(unsigned int ddrpll_M);
void sdelay(unsigned long);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
void omap_nand_switch_ecc(uint32_t, uint32_t);
+
+void rtc32k_enable(void);
+void uart_soft_reset(void);
#endif
#define EXYNOS4_CLOCK_BASE 0x10030000
#define EXYNOS4_SYSTIMER_BASE 0x10050000
#define EXYNOS4_WATCHDOG_BASE 0x10060000
+#define EXYNOS4_TZPC_BASE 0x10110000
#define EXYNOS4_MIU_BASE 0x10600000
#define EXYNOS4_DMC0_BASE 0x10400000
#define EXYNOS4_DMC1_BASE 0x10410000
#define EXYNOS4X12_CLOCK_BASE 0x10030000
#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
+#define EXYNOS4X12_TZPC_BASE 0x10110000
#define EXYNOS4X12_DMC0_BASE 0x10600000
#define EXYNOS4X12_DMC1_BASE 0x10610000
#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
#define EXYNOS5_POWER_BASE 0x10040000
#define EXYNOS5_SWRESET 0x10040400
#define EXYNOS5_SYSREG_BASE 0x10050000
+#define EXYNOS5_TZPC_BASE 0x10100000
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
#define EXYNOS5_DMC_PHY0_BASE 0x10C00000
SAMSUNG_BASE(power, POWER_BASE)
SAMSUNG_BASE(spi, SPI_BASE)
SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
+SAMSUNG_BASE(tzpc, TZPC_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */
#define DWMCI_SET_DRV_CLK(x) ((x) << 16)
#define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
-int exynos_dwmci_init(u32 regbase, int bus_width, int index);
-
-static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
-{
- unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
- return exynos_dwmci_init(base, bus_width, index);
-}
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob);
+#endif
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel);
#define __ASM_ARCH_TMU_H
struct exynos5_tmu_reg {
- unsigned triminfo;
- unsigned rsvd1;
- unsigned rsvd2;
- unsigned rsvd3;
- unsigned rsvd4;
- unsigned triminfo_control;
- unsigned rsvd5;
- unsigned rsvd6;
- unsigned tmu_control;
- unsigned rsvd7;
- unsigned tmu_status;
- unsigned sampling_internal;
- unsigned counter_value0;
- unsigned counter_value1;
- unsigned rsvd8;
- unsigned rsvd9;
- unsigned current_temp;
- unsigned rsvd10;
- unsigned rsvd11;
- unsigned rsvd12;
- unsigned threshold_temp_rise;
- unsigned threshold_temp_fall;
- unsigned rsvd13;
- unsigned rsvd14;
- unsigned past_temp3_0;
- unsigned past_temp7_4;
- unsigned past_temp11_8;
- unsigned past_temp15_12;
- unsigned inten;
- unsigned intstat;
- unsigned intclear;
- unsigned rsvd15;
- unsigned emul_con;
+ u32 triminfo;
+ u32 rsvd1[4];
+ u32 triminfo_control;
+ u32 rsvd5[2];
+ u32 tmu_control;
+ u32 rsvd7;
+ u32 tmu_status;
+ u32 sampling_internal;
+ u32 counter_value0;
+ u32 counter_value1;
+ u32 rsvd8[2];
+ u32 current_temp;
+ u32 rsvd10[3];
+ u32 threshold_temp_rise;
+ u32 threshold_temp_fall;
+ u32 rsvd13[2];
+ u32 past_temp3_0;
+ u32 past_temp7_4;
+ u32 past_temp11_8;
+ u32 past_temp15_12;
+ u32 inten;
+ u32 intstat;
+ u32 intclear;
+ u32 rsvd15;
+ u32 emul_con;
};
#endif /* __ASM_ARCH_TMU_H */
unsigned int pcellid2;
unsigned int pcellid3;
};
+
+#define EXYNOS4_NR_TZPC_BANKS 6
+#define EXYNOS5_NR_TZPC_BANKS 10
+
+/* TZPC : Register Offsets */
+#define TZPC_BASE_OFFSET 0x10000
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE 0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET 0xFF
+void tzpc_init(void);
+
#endif
#endif
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
-COBJS-y += bss.o
+COBJS-y += sections.o
COBJS-y += bootm.o
COBJS-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
*/
ENTRY(relocate_code)
- mov r6, r0 /* save addr of destination */
-
- ldr r0, =_start /* r0 <- SRC &_start */
- subs r9, r6, r0 /* r9 <- relocation offset */
+ ldr r1, =__image_copy_start /* r1 <- SRC &__image_copy_start */
+ subs r9, r0, r1 /* r9 <- relocation offset */
beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy loop */
- adr r7, relocate_code /* r7 <- SRC &relocate_code */
- ldr r3, _image_copy_end_ofs /* r3 <- __image_copy_end local ofs */
- add r2, r7, r3 /* r2 <- SRC &__image_copy_end */
+ ldr r2, =__image_copy_end /* r2 <- SRC &__image_copy_end */
copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
+ ldmia r1!, {r10-r11} /* copy from source address [r1] */
+ stmia r0!, {r10-r11} /* copy to target address [r0] */
+ cmp r1, r2 /* until source end address [r2] */
blo copy_loop
/*
* fix .rel.dyn relocations
*/
- ldr r10, _dynsym_start_ofs /* r10 <- __dynsym_start local ofs */
- add r10, r10, r7 /* r10 <- SRC &__dynsym_start */
- ldr r2, _rel_dyn_start_ofs /* r2 <- __rel_dyn_start local ofs */
- add r2, r2, r7 /* r2 <- SRC &__rel_dyn_start */
- ldr r3, _rel_dyn_end_ofs /* r3 <- __rel_dyn_end local ofs */
- add r3, r3, r7 /* r3 <- SRC &__rel_dyn_end */
+ ldr r2, =__rel_dyn_start /* r2 <- SRC &__rel_dyn_start */
+ ldr r3, =__rel_dyn_end /* r3 <- SRC &__rel_dyn_end */
fixloop:
- ldr r0, [r2] /* r0 <- SRC location to fix up */
- add r0, r0, r9 /* r0 <- DST location to fix up */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
+ ldmia r2!, {r0-r1} /* (r0,r1) <- (SRC location,fixup) */
+ and r1, r1, #0xff
+ cmp r1, #23 /* relative fixup? */
+ bne fixnext
+
/* relative fix: increase location by offset */
+ add r0, r0, r9
ldr r1, [r0]
add r1, r1, r9
-fixnext:
str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
+fixnext:
cmp r2, r3
blo fixloop
bx lr
#endif
-_image_copy_end_ofs:
- .word __image_copy_end - relocate_code
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - relocate_code
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - relocate_code
-_dynsym_start_ofs:
- .word __dynsym_start - relocate_code
-
ENDPROC(relocate_code)
* aliasing warnings.
*/
-char __bss_start[0] __attribute__((used, section(".__bss_start")));
-char __bss_end[0] __attribute__((used, section(".__bss_end")));
+char __bss_start[0] __attribute__((section(".__bss_start")));
+char __bss_end[0] __attribute__((section(".__bss_end")));
+char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
+char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
+char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
+char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
COBJS-$(CONFIG_P1020) += ddr-gen3.o
COBJS-$(CONFIG_P1021) += ddr-gen3.o
COBJS-$(CONFIG_P1022) += ddr-gen3.o
+COBJS-$(CONFIG_P1023) += ddr-gen3.o
COBJS-$(CONFIG_P1024) += ddr-gen3.o
COBJS-$(CONFIG_P1025) += ddr-gen3.o
COBJS-$(CONFIG_P2010) += ddr-gen3.o
#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
puts("Work-around for Erratum USB14 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
+ puts("Work-around for Erratum A006593 enabled\n");
+#endif
return 0;
}
switch(ver) {
case PVR_VER_E500_V1:
case PVR_VER_E500_V2:
- puts("E500");
+ puts("e500");
break;
case PVR_VER_E500MC:
- puts("E500MC");
+ puts("e500mc");
break;
case PVR_VER_E5500:
- puts("E5500");
+ puts("e5500");
break;
case PVR_VER_E6500:
- puts("E6500");
+ puts("e6500");
break;
default:
puts("Unknown");
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
return fsl_ddr_sdram_size();
#else
- return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+ return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
#endif
}
#else /* CONFIG_SYS_RAMBOOT */
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
+ setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
+#endif
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
/* Read back to sync write */
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
char *s = getenv("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_A003399_NOR_WORKAROUND
void setup_ifc(void)
{
struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_A003399_NOR_WORKAROUND
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
u32 *dst, *src;
void (*setup_ifc_sram)(void);
* Work Around for IFC Erratum A003399, issue will hit only when execution
* from NOR Flash
*/
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_A003399_NOR_WORKAROUND
#define SRAM_BASE_ADDR (0x00000000)
/* TLB for SRAM */
mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9);
invalidate_tlb(1);
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NAND_SPL)
+ disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
+#endif
+
init_tlbs();
}
#ifdef CONFIG_FSL_CORENET
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
- do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2",
+ do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
do_fixup_by_compat_u32(blob, "fsl,mpic",
"clock-frequency", get_bus_freq(0)/2, 1);
break;
}
- if (srds1_io_sel > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds1_io_sel >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[SRDS1_IO_SEL] = %d\n", srds1_io_sel);
return;
}
serdes1_prtcl_map |= (1 << lane_prtcl);
}
- if (srds2_io_sel > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ if (srds2_io_sel >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
serdes1_prtcl_map |= (1 << lane_prtcl);
}
- if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg);
- if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds1_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg);
return ;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
serdes1_prtcl_map |= (1 << lane_prtcl);
}
- if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
serdes1_prtcl_map |= (1 << lane_prtcl);
}
- if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
u32 svr = get_svr();
u32 ver = SVR_SOC_VER(svr);
- if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
/* P2040[e] does not support XAUI */
int is_serdes_prtcl_valid(u32 prtcl) {
int i;
- if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
for (i = 0; i < SRDS_MAX_LANES; i++) {
int is_serdes_prtcl_valid(u32 prtcl) {
int i;
- if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
for (i = 0; i < SRDS_MAX_LANES; i++) {
int is_serdes_prtcl_valid(u32 prtcl) {
int i;
- if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
for (i = 0; i < SRDS_MAX_LANES; i++) {
{
int i;
- if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
for (i = 0; i < SRDS_MAX_LANES; i++) {
stw r0,0(r3)
addi r3,r3,4
cmplw 0,r3,r4
- bne 5b
+ blt 5b
6:
mr r3,r9 /* Init Data pointer */
{
int i;
- if (prtcl > (ARRAY_SIZE(serdes_cfg_tbl[serdes])))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl[serdes]))
return 0;
for (i = 0; i < SRDS_MAX_LANES; i++) {
#include "config.h" /* CONFIG_BOARDDIR */
OUTPUT_ARCH(powerpc)
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+PHDRS
+{
+ text PT_LOAD;
+ bss PT_LOAD;
+}
+#endif
SECTIONS
{
. = CONFIG_SPL_TEXT_BASE;
#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
.bootpg ADDR(.text) + 0x1000 :
{
- start.o (.bootpg)
+ arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
}
#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
#elif defined(CONFIG_FSL_ELBC)
#else
#error unknown NAND controller
#endif
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+ .bootpg ADDR(.text) - 0x1000 :
+ {
+ KEEP(*(.bootpg))
+ } :text = 0xffff
+#else
.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
KEEP(*(.resetvec))
} = 0xffff
+#endif
/*
* Make sure that the bss segment isn't linked at 0x0, otherwise its
*/
. |= 0x10;
+ . = ALIGN(4);
__bss_start = .;
.bss : {
*(.sbss*)
*(.bss*)
}
+ . = ALIGN(4);
__bss_end = .;
}
. = ALIGN(256);
__init_end = .;
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+ .bootpg ADDR(.text) - 0x1000 :
+ {
+ KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg))
+ } :text = 0xffff
+ . = ADDR(.text) + 0x80000;
+#else
.bootpg RESET_VECTOR_ADDRESS - 0xffc :
{
arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
. |= 0x10;
#endif
+#endif
__bss_start = .;
.bss (NOLOAD) :
major = PVR_E600_MAJ(pvr);
minor = PVR_E600_MIN(pvr);
- printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
+ printf("e600 Core %d", (msscr0 & 0x20) ? 1 : 0);
if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
puts("\n Core1Translation Enabled");
debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
serdes1_prtcl_map |= (1 << lane_prtcl);
}
- if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
- if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
serdes1_prtcl_map |= (1 << lane_prtcl);
}
- if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
}
int i, j;
printf("IFC Controller Registers\n");
- for (i = 0; i < FSL_IFC_BANK_COUNT; i++) {
+ for (i = 0; i < CONFIG_SYS_FSL_IFC_BANK_COUNT; i++) {
printf("CSPR%d:0x%08X\tAMASK%d:0x%08X\tCSOR%d:0x%08X\n",
i, get_ifc_cspr(i), i, get_ifc_amask(i),
i, get_ifc_csor(i));
set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
-#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT)
+#ifndef CONFIG_A003399_NOR_WORKAROUND
#ifdef CONFIG_SYS_CSPR0_EXT
set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
#endif
set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3);
set_ifc_csor(IFC_CS3, CONFIG_SYS_CSOR3);
#endif
+
+#ifdef CONFIG_SYS_CSPR4_EXT
+ set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4)
+ set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0);
+ set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1);
+ set_ifc_ftim(IFC_CS4, IFC_FTIM2, CONFIG_SYS_CS4_FTIM2);
+ set_ifc_ftim(IFC_CS4, IFC_FTIM3, CONFIG_SYS_CS4_FTIM3);
+
+ set_ifc_cspr(IFC_CS4, CONFIG_SYS_CSPR4);
+ set_ifc_amask(IFC_CS4, CONFIG_SYS_AMASK4);
+ set_ifc_csor(IFC_CS4, CONFIG_SYS_CSOR4);
+#endif
+
+#ifdef CONFIG_SYS_CSPR5_EXT
+ set_ifc_cspr_ext(IFC_CS5, CONFIG_SYS_CSPR5_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR5) && defined(CONFIG_SYS_CSOR5)
+ set_ifc_ftim(IFC_CS5, IFC_FTIM0, CONFIG_SYS_CS5_FTIM0);
+ set_ifc_ftim(IFC_CS5, IFC_FTIM1, CONFIG_SYS_CS5_FTIM1);
+ set_ifc_ftim(IFC_CS5, IFC_FTIM2, CONFIG_SYS_CS5_FTIM2);
+ set_ifc_ftim(IFC_CS5, IFC_FTIM3, CONFIG_SYS_CS5_FTIM3);
+
+ set_ifc_cspr(IFC_CS5, CONFIG_SYS_CSPR5);
+ set_ifc_amask(IFC_CS5, CONFIG_SYS_AMASK5);
+ set_ifc_csor(IFC_CS5, CONFIG_SYS_CSOR5);
+#endif
+
+#ifdef CONFIG_SYS_CSPR6_EXT
+ set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6)
+ set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0);
+ set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1);
+ set_ifc_ftim(IFC_CS6, IFC_FTIM2, CONFIG_SYS_CS6_FTIM2);
+ set_ifc_ftim(IFC_CS6, IFC_FTIM3, CONFIG_SYS_CS6_FTIM3);
+
+ set_ifc_cspr(IFC_CS6, CONFIG_SYS_CSPR6);
+ set_ifc_amask(IFC_CS6, CONFIG_SYS_AMASK6);
+ set_ifc_csor(IFC_CS6, CONFIG_SYS_CSOR6);
+#endif
+
+#ifdef CONFIG_SYS_CSPR7_EXT
+ set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7)
+ set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0);
+ set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1);
+ set_ifc_ftim(IFC_CS7, IFC_FTIM2, CONFIG_SYS_CS7_FTIM2);
+ set_ifc_ftim(IFC_CS7, IFC_FTIM3, CONFIG_SYS_CS7_FTIM3);
+
+ set_ifc_cspr(IFC_CS7, CONFIG_SYS_CSPR7);
+ set_ifc_amask(IFC_CS7, CONFIG_SYS_AMASK7);
+ set_ifc_csor(IFC_CS7, CONFIG_SYS_CSOR7);
+#endif
}
#include <asm/fsl_srio.h>
#include <asm/errno.h>
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
#define SRIO_PORT_ACCEPT_ALL 0x10000001
#define SRIO_IB_ATMU_AR 0x80f55000
#define SRIO_OB_ATMU_AR_MAINT 0x80077000
}
}
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
void srio_boot_master(int port)
{
struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_USB14
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000
+#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_NUM_DDR_CONTROLLERS 2
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_ERRATUM_A004468
#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_FSL_ERRATUM_A005871
+#define CONFIG_SYS_FSL_ERRATUM_A006593
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_PCI_VER_3_X
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_FSL_ERRATUM_A005871
+#define CONFIG_SYS_FSL_ERRATUM_A006593
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#ifdef CONFIG_PPC_B4860
#ifndef __ASM_PPC_FSL_IFC_H
#define __ASM_PPC_FSL_IFC_H
+#ifdef CONFIG_FSL_IFC
#include <config.h>
#include <common.h>
#define set_ifc_ftim(i, j, v) \
(out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v))
-#define FSL_IFC_BANK_COUNT 4
-
enum ifc_chip_sel {
IFC_CS0,
IFC_CS1,
IFC_CS2,
IFC_CS3,
+ IFC_CS4,
+ IFC_CS5,
+ IFC_CS6,
+ IFC_CS7,
};
enum ifc_ftims {
u32 res4[0x1F3];
};
+#ifdef CONFIG_SYS_FSL_IFC_BANK_COUNT
+#if (CONFIG_SYS_FSL_IFC_BANK_COUNT <= 8)
+#define IFC_CSPR_REG_LEN 148
+#define IFC_AMASK_REG_LEN 144
+#define IFC_CSOR_REG_LEN 144
+#define IFC_FTIM_REG_LEN 576
+
+#define IFC_CSPR_USED_LEN sizeof(struct fsl_ifc_cspr) * \
+ CONFIG_SYS_FSL_IFC_BANK_COUNT
+#define IFC_AMASK_USED_LEN sizeof(struct fsl_ifc_amask) * \
+ CONFIG_SYS_FSL_IFC_BANK_COUNT
+#define IFC_CSOR_USED_LEN sizeof(struct fsl_ifc_csor) * \
+ CONFIG_SYS_FSL_IFC_BANK_COUNT
+#define IFC_FTIM_USED_LEN sizeof(struct fsl_ifc_ftim) * \
+ CONFIG_SYS_FSL_IFC_BANK_COUNT
+#else
+#error IFC BANK count not vaild
+#endif
+#else
+#error IFC BANK count not defined
+#endif
+
+struct fsl_ifc_cspr {
+ u32 cspr_ext;
+ u32 cspr;
+ u32 res;
+};
+
+struct fsl_ifc_amask {
+ u32 amask;
+ u32 res[0x2];
+};
+
+struct fsl_ifc_csor {
+ u32 csor;
+ u32 csor_ext;
+ u32 res;
+};
+
+struct fsl_ifc_ftim {
+ u32 ftim[4];
+ u32 res[0x8];
+};
/*
* IFC Controller Registers
struct fsl_ifc {
u32 ifc_rev;
u32 res1[0x2];
- struct {
- u32 cspr_ext;
- u32 cspr;
- u32 res2;
- } cspr_cs[FSL_IFC_BANK_COUNT];
- u32 res3[0x19];
- struct {
- u32 amask;
- u32 res4[0x2];
- } amask_cs[FSL_IFC_BANK_COUNT];
- u32 res5[0x17];
- struct {
- u32 csor_ext;
- u32 csor;
- u32 res6;
- } csor_cs[FSL_IFC_BANK_COUNT];
- u32 res7[0x19];
- struct {
- u32 ftim[4];
- u32 res8[0x8];
- } ftim_cs[FSL_IFC_BANK_COUNT];
- u32 res9[0x60];
+ struct fsl_ifc_cspr cspr_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT];
+ u8 res2[IFC_CSPR_REG_LEN - IFC_CSPR_USED_LEN];
+ struct fsl_ifc_amask amask_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT];
+ u8 res3[IFC_AMASK_REG_LEN - IFC_AMASK_USED_LEN];
+ struct fsl_ifc_csor csor_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT];
+ u8 res4[IFC_CSOR_REG_LEN - IFC_CSOR_USED_LEN];
+ struct fsl_ifc_ftim ftim_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT];
+ u8 res5[IFC_FTIM_REG_LEN - IFC_FTIM_USED_LEN];
u32 rb_stat;
- u32 res10[0x2];
+ u32 res6[0x2];
u32 ifc_gcr;
- u32 res11[0x2];
+ u32 res7[0x2];
u32 cm_evter_stat;
- u32 res12[0x2];
+ u32 res8[0x2];
u32 cm_evter_en;
- u32 res13[0x2];
+ u32 res9[0x2];
u32 cm_evter_intr_en;
- u32 res14[0x2];
+ u32 res10[0x2];
u32 cm_erattr0;
u32 cm_erattr1;
- u32 res15[0x2];
+ u32 res11[0x2];
u32 ifc_ccr;
u32 ifc_csr;
- u32 res16[0x2EB];
+ u32 res12[0x2EB];
struct fsl_ifc_nand ifc_nand;
struct fsl_ifc_nor ifc_nor;
struct fsl_ifc_gpcm ifc_gpcm;
#undef CSPR_MSEL_NOR
#define CSPR_MSEL_NOR CSPR_MSEL_GPCM
#endif
+#endif /* CONFIG_FSL_IFC */
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PPC_FSL_IFC_H */
#ifndef CONFIG_MPC8641
LAW_TRGT_IF_PCIE_1 = 0x02,
#endif
+#if defined(CONFIG_BSC9131)
+ LAW_TRGT_IF_OCN_DSP = 0x03,
+#else
#if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020)
LAW_TRGT_IF_PCIE_3 = 0x03,
#endif
+#endif
LAW_TRGT_IF_LBC = 0x04,
LAW_TRGT_IF_CCSR = 0x08,
+ LAW_TRGT_IF_DSP_CCSR = 0x09,
LAW_TRGT_IF_DDR_INTRLV = 0x0b,
LAW_TRGT_IF_RIO = 0x0c,
LAW_TRGT_IF_RIO_2 = 0x0d,
#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
+#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
+#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
#elif defined(CONFIG_PPC_T1040)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
u32 porbmsr; /* POR boot mode status */
#define MPC85xx_PORBMSR_HA 0x00070000
#define MPC85xx_PORBMSR_HA_SHIFT 16
-#define MPC85XX_PORBMSR_ROMLOC_SHIFT 24
+#define MPC85xx_PORBMSR_ROMLOC_SHIFT 24
#define PORBMSR_ROMLOC_SPI 0x6
#define PORBMSR_ROMLOC_SDHC 0x7
#define PORBMSR_ROMLOC_NAND_2K 0x9
--- /dev/null
+/*
+ * cpld-gpio-bus.c: provides support for the CPLD GPIO bus found on some LaCie
+ * boards (as the 2Big/5Big Network v2 and the 2Big NAS). This parallel GPIO
+ * bus exposes two registers (address and data). Each of this register is made
+ * up of several dedicated GPIOs. An extra GPIO is used to notify the CPLD that
+ * the registers have been updated.
+ *
+ * Mostly this bus is used to configure the LEDs on LaCie boards.
+ *
+ * Copyright (C) 2013 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <asm/arch/gpio.h>
+#include "cpld-gpio-bus.h"
+
+static void cpld_gpio_bus_set_addr(struct cpld_gpio_bus *bus, unsigned addr)
+{
+ int pin;
+
+ for (pin = 0; pin < bus->num_addr; pin++)
+ kw_gpio_set_value(bus->addr[pin], (addr >> pin) & 1);
+}
+
+static void cpld_gpio_bus_set_data(struct cpld_gpio_bus *bus, unsigned data)
+{
+ int pin;
+
+ for (pin = 0; pin < bus->num_data; pin++)
+ kw_gpio_set_value(bus->data[pin], (data >> pin) & 1);
+}
+
+static void cpld_gpio_bus_enable_select(struct cpld_gpio_bus *bus)
+{
+ /* The transfer is enabled on the raising edge. */
+ kw_gpio_set_value(bus->enable, 0);
+ kw_gpio_set_value(bus->enable, 1);
+}
+
+void cpld_gpio_bus_write(struct cpld_gpio_bus *bus,
+ unsigned addr, unsigned value)
+{
+ cpld_gpio_bus_set_addr(bus, addr);
+ cpld_gpio_bus_set_data(bus, value);
+ cpld_gpio_bus_enable_select(bus);
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _LACIE_CPLD_GPI0_BUS_H
+#define _LACIE_CPLD_GPI0_BUS_H
+
+struct cpld_gpio_bus {
+ unsigned *addr;
+ unsigned num_addr;
+ unsigned *data;
+ unsigned num_data;
+ unsigned enable;
+};
+
+void cpld_gpio_bus_write(struct cpld_gpio_bus *cpld_gpio_bus,
+ unsigned addr, unsigned value);
+
+#endif /* _LACIE_CPLD_GPI0_BUS_H */
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o ../common/common.o
+ifneq ($(and $(CONFIG_KIRKWOOD_GPIO),$(CONFIG_NET2BIG_V2)),)
+COBJS += ../common/cpld-gpio-bus.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
#include <common.h>
#include <command.h>
+#include <i2c.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include "net2big_v2.h"
#include "../common/common.h"
+#include "../common/cpld-gpio-bus.h"
DECLARE_GLOBAL_DATA_PTR;
MPP24_GPIO, /* USB mode select */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
+ MPP29_GPIO, /* CPLD GPIO bus ALE */
MPP34_GPIO, /* Rear Push button 0=on 1=off */
MPP35_GPIO, /* Inhibit switch power-off */
MPP36_GPIO, /* SATA HDD1 presence */
MPP37_GPIO, /* SATA HDD2 presence */
MPP40_GPIO, /* eSATA presence */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
+ MPP44_GPIO, /* CPLD GPIO bus (data 0) */
+ MPP45_GPIO, /* CPLD GPIO bus (data 1) */
+ MPP46_GPIO, /* CPLD GPIO bus (data 2) */
+ MPP47_GPIO, /* CPLD GPIO bus (addr 0) */
+ MPP48_GPIO, /* CPLD GPIO bus (addr 1) */
+ MPP49_GPIO, /* CPLD GPIO bus (addr 2) */
0
};
}
#if defined(CONFIG_MISC_INIT_R)
+
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_G762_ADDR)
+/*
+ * Start I2C fan (GMT G762 controller)
+ */
+static void init_fan(void)
+{
+ u8 data;
+
+ i2c_set_bus_num(0);
+
+ /* Enable open-loop and PWM modes */
+ data = 0x20;
+ if (i2c_write(CONFIG_SYS_I2C_G762_ADDR,
+ G762_REG_FAN_CMD1, 1, &data, 1) != 0)
+ goto err;
+ data = 0;
+ if (i2c_write(CONFIG_SYS_I2C_G762_ADDR,
+ G762_REG_SET_CNT, 1, &data, 1) != 0)
+ goto err;
+ /*
+ * RPM to PWM (set_out register) fan speed conversion array:
+ * 0 0x00
+ * 1500 0x04
+ * 2800 0x08
+ * 3400 0x0C
+ * 3700 0x10
+ * 4400 0x20
+ * 4700 0x30
+ * 4800 0x50
+ * 5200 0x80
+ * 5400 0xC0
+ * 5500 0xFF
+ *
+ * Start fan at low speed (2800 RPM):
+ */
+ data = 0x08;
+ if (i2c_write(CONFIG_SYS_I2C_G762_ADDR,
+ G762_REG_SET_OUT, 1, &data, 1) != 0)
+ goto err;
+
+ return;
+err:
+ printf("Error: failed to start I2C fan @%02x\n",
+ CONFIG_SYS_I2C_G762_ADDR);
+}
+#else
+static void init_fan(void) {}
+#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_G762_ADDR */
+
+#if defined(CONFIG_NET2BIG_V2) && defined(CONFIG_KIRKWOOD_GPIO)
+/*
+ * CPLD GPIO bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register : bit [0-2] -> GPIO [44-46]
+ * - enable register : GPIO 29
+ */
+static unsigned cpld_gpio_bus_addr[] = { 47, 48, 49 };
+static unsigned cpld_gpio_bus_data[] = { 44, 45, 46 };
+
+static struct cpld_gpio_bus cpld_gpio_bus = {
+ .addr = cpld_gpio_bus_addr,
+ .num_addr = ARRAY_SIZE(cpld_gpio_bus_addr),
+ .data = cpld_gpio_bus_data,
+ .num_data = ARRAY_SIZE(cpld_gpio_bus_data),
+ .enable = 29,
+};
+
+/*
+ * LEDs configuration:
+ *
+ * The LEDs are controlled by a CPLD and can be configured through
+ * the CPLD GPIO bus.
+ *
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ * 0 | front LED
+ * 1 | front LED brightness
+ * 2 | SATA LED brightness
+ * 3 | SATA0 LED
+ * 4 | SATA1 LED
+ * 5 | SATA2 LED
+ * 6 | SATA3 LED
+ * 7 | SATA4 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ * 0 | min (off)
+ * - | -
+ * 7 | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | fix blue on
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | SATA LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | SATA activity blink
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | fix blue on
+ */
+static void init_leds(void)
+{
+ /* Enable the front blue LED */
+ cpld_gpio_bus_write(&cpld_gpio_bus, 0, 1);
+ cpld_gpio_bus_write(&cpld_gpio_bus, 1, 3);
+
+ /* Configure SATA LEDs to blink in relation with the SATA activity */
+ cpld_gpio_bus_write(&cpld_gpio_bus, 3, 1);
+ cpld_gpio_bus_write(&cpld_gpio_bus, 4, 1);
+ cpld_gpio_bus_write(&cpld_gpio_bus, 2, 3);
+}
+#else
+static void init_leds(void) {}
+#endif /* CONFIG_NET2BIG_V2 && CONFIG_KIRKWOOD_GPIO */
+
int misc_init_r(void)
{
+ init_fan();
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
if (!getenv("ethaddr")) {
uchar mac[6];
eth_setenv_enetaddr("ethaddr", mac);
}
#endif
+ init_leds();
+
return 0;
}
-#endif
+#endif /* CONFIG_MISC_INIT_R */
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and initialize PHY */
/* Buttons */
#define NET2BIG_V2_GPIO_PUSH_BUTTON 34
+/* GMT G762 registers (I2C fan controller) */
+#define G762_REG_SET_CNT 0x00
+#define G762_REG_SET_OUT 0x03
+#define G762_REG_FAN_CMD1 0x04
+
#endif /* NET2BIG_V2_H */
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux1/libactux1.o(.text*)
. = ALIGN (4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux2/libactux2.o(.text*)
. = ALIGN (4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux3/libactux3.o(.text*)
. = ALIGN (4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
__rel_dyn_end = .;
} >.sram
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- } >.sram
-
.bss :
{
. = ALIGN(4);
__rel_dyn_end = .;
} >.sram
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- } >.sram
-
.bss :
{
. = ALIGN(4);
__image_copy_end = .;
__rel_dyn_start = .;
__rel_dyn_end = .;
- __dynsym_start = .;
__got_start = .;
. = ALIGN(4);
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/dvlhost/libdvlhost.o(.text*)
. = ALIGN (4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+ /*
+ * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
+ * space is at 0xfff00000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
+ CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_1M, 1),
#else
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 16, BOOKE_PAGESZ_256M, 1),
#endif
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+ /*
+ * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
+ * fetching ucode and ENV from master
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
+ CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+ 0, 17, BOOKE_PAGESZ_1M, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
LIB = $(obj)lib$(BOARD).o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-y += spl_minimal.o tlb.o law.o
+
+else
+
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
COBJS-y += law.o
COBJS-y += tlb.o
#COBJS-y += bsc9131rdb_mux.o
+endif
+
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
Building U-boot
--------------
To build the u-boot for BSC9131RDB:
-1. NAND Flash
+1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default)
make BSC9131RDB_NAND
-2. SPI Flash
+2. NAND Flash with sysclk 100MHz(J16 on RDB open)
+ make BSC9131RDB_NAND_SYSCLK100
+3. SPI Flash with sysclk 66MHz(J16 on RDB closed, default)
make BSC9131RDB_SPIFLASH
+4. SPI Flash with sysclk 100MHz(J16 on RDB open)
+ make BSC9131RDB_SPIFLASH_SYSCLK100
Memory map
-----------
0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
0xFF80_0000 0xFFFF_FFFF Boot Page & NAND Buffer 8M
+DDR Memory map
+---------------
+ 0x0000_0000 0x36FF_FFFF Memory passed onto Linux
+ 0x3700_0000 0x37FF_FFFF PowerPC-DSP shared control area
+ 0x3800_0000 0x4FFF_FFFF DSP Private area
+
+ Out of 880M, passed onto Linux, 1hugetlb page of 256M is reserved for
+ data communcation between PowerPC and DSP core.
+ Rest is PowerPC private area.
+
Flashing Images
---------------
To place a new u-boot image in the NAND flash and then boot
struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+ SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M,
+ LAW_TRGT_IF_DSP_CCSR),
+ SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_16M,
+ LAW_TRGT_IF_OCN_DSP),
};
int num_law_entries = ARRAY_SIZE(law_table);
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <linux/compiler.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+static void sdram_init(void)
+{
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+
+ __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
+ __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
+#endif
+ __raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
+
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
+ __raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
+
+ __raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
+ __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+ __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
+
+ __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
+ __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+
+ /* Set, but do not enable the memory */
+ __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
+
+ asm volatile("sync;isync");
+ udelay(500);
+
+ /* Let the controller go */
+ out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
+
+ set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* initialize selected port with appropriate baud rate */
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio >>= 1;
+ gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+ /* Initialize the DDR3 */
+ sdram_init();
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
/* TLB 1 */
/* *I*** - Covers boot page */
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#ifdef CONFIG_SPL_NAND_MINIMAL
+ SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_4K, 1),
+#endif
/* *I*G* - CCSRBAR (PA) */
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_1M, 1),
-#if defined(CONFIG_SYS_RAMBOOT)
+ /* CCSRBAR (DSP) */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR,
+ CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_1M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 8, BOOKE_PAGESZ_1G, 1),
LIB = $(obj)lib$(BOARD).o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-y += spl_minimal.o tlb.o law.o
+
+else
+
+
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
COBJS-y += law.o
COBJS-y += tlb.o
+endif
+
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
u8 val;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 porbmsr = in_be32(&gur->porbmsr);
- u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+ u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
/*Configure 1588 clock-in source from RF Card*/
val = QIXIS_READ_I2C(brdcfg[5]);
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 porbmsr = in_be32(&gur->porbmsr);
- u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+ u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
if (!(hwconfig("uart2") && hwconfig("usb1"))) {
/* If uart2 is there in hwconfig remove usb node from
#include <asm/mmu.h>
struct law_entry law_table[] = {
-#ifndef CONFIG_SYS_NO_FLASH
SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC),
-#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_FPGA_BASE_PHYS
SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
+#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <linux/compiler.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void sdram_init(void)
+{
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+#if CONFIG_DDR_CLK_FREQ == 100000000
+ __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_800 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_2_800, &ddr->sdram_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
+ __raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
+ __raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
+ __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
+ __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_4_800, &ddr->timing_cfg_4);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_5_800, &ddr->timing_cfg_5);
+ __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+#elif CONFIG_DDR_CLK_FREQ == 133000000
+ __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_1333 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_2_1333, &ddr->sdram_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_3_1333, &ddr->timing_cfg_3);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_0_1333, &ddr->timing_cfg_0);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_1_1333, &ddr->timing_cfg_1);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_2_1333, &ddr->timing_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_MODE_1_1333, &ddr->sdram_mode);
+ __raw_writel(CONFIG_SYS_DDR_MODE_2_1333, &ddr->sdram_mode_2);
+ __raw_writel(CONFIG_SYS_DDR_INTERVAL_1333, &ddr->sdram_interval);
+ __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_1333, &ddr->sdram_clk_cntl);
+ __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_1333, &ddr->ddr_wrlvl_cntl);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_4_1333, &ddr->timing_cfg_4);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_5_1333, &ddr->timing_cfg_5);
+ __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+#else
+ puts("Not a valid DDR Freq Found! Please Reset\n");
+#endif
+ asm volatile("sync;isync");
+ udelay(500);
+
+ /* Let the controller go */
+ out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
+
+ set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* initialize selected port with appropriate baud rate */
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio >>= 1;
+ gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+ /* Initialize the DDR3 */
+ sdram_init();
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
/* TLB 1 */
/* *I*** - Covers boot page */
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#ifdef CONFIG_SPL_NAND_MINIMAL
+ SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_4K, 1),
+#endif
/* *I*G* - CCSRBAR (PA) */
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_1M, 1),
+#ifndef CONFIG_SPL_BUILD
SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 3, BOOKE_PAGESZ_64M, 1),
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 4, BOOKE_PAGESZ_64M, 1),
-#if defined(CONFIG_SYS_RAMBOOT)
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 8, BOOKE_PAGESZ_1G, 1),
-#endif
-
#ifdef CONFIG_PCI
/* *I*G* - PCI */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_64K, 1),
#endif
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_1G, 1),
+#endif
+#ifdef CONFIG_SYS_FPGA_BASE
/* *I*G - Board FPGA */
SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 9, BOOKE_PAGESZ_256K, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 5, BOOKE_PAGESZ_1M, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
LIB = $(obj)libfreescale.o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifndef MINIMAL
COBJS-$(CONFIG_FSL_CADMUS) += cadmus.o
COBJS-$(CONFIG_FSL_VIA) += cds_via.o
COBJS-$(CONFIG_FMAN_ENET) += fman.o
SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5040DS) += p_corenet/libp_corenet.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
|| unknown_param) {
#ifdef CONFIG_SYS_LONGHELP
puts(cmdtp->help);
+ putc('\n');
#endif
return 1;
}
&& set_px_mpxpll(mpxpll))) {
#ifdef CONFIG_SYS_LONGHELP
puts(cmdtp->help);
+ putc('\n');
#endif
return 1;
}
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
. = ALIGN(4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
.rel.dyn : {
- __rel_dyn_start = .;
*(.rel*)
- __rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
}
/DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
/DISCARD/ : { *(.dynamic*) }
LIB = $(obj)lib$(BOARD).o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-y += spl_minimal.o tlb.o law.o
+
+else
+
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
COBJS-y += law.o
COBJS-y += tlb.o
+endif
+
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
DECLARE_GLOBAL_DATA_PTR;
-unsigned long ddr_freq_mhz;
void sdram_init(void)
{
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u32 ddr_ratio;
+ unsigned long ddr_freq_mhz;
+
+ ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
+ ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+ ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
+
/* mask off E bit */
u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
__raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff, &ddr->cs0_bnds);
}
+ asm volatile("sync;isync");
udelay(500);
/* Let the controller go */
void board_init_f(ulong bootflag)
{
- u32 plat_ratio, ddr_ratio;
+ u32 plat_ratio;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* initialize selected port with appropriate baud rate */
plat_ratio >>= 1;
gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
- ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
- ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
- ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
-
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
gd->bus_clk / 16 / CONFIG_BAUDRATE);
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
- relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
- CONFIG_SYS_NAND_U_BOOT_RELOC);
+
+ relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
}
void board_init_r(gd_t *gd, ulong dest_addr)
/* TLB 1 */
/* *I*** - Covers boot page */
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#ifdef CONFIG_SPL_NAND_MINIMAL
+ SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_4K, 1),
+#endif
/* *I*G* - CCSRBAR */
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_1M, 1),
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
#ifndef CONFIG_SDCARD
SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 7, BOOKE_PAGESZ_1M, 1),
#endif
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 8, BOOKE_PAGESZ_1G, 1)
--- /dev/null
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* CONFIG_SYS_DDR_RAW_TIMING */
+/*
+ * Hynix H5TQ1G83TFR-H9C
+ */
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 536870912u,
+ .capacity = 536870912u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 14,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tCKmin_X_ps = 1875,
+ .caslat_X = 0x1e << 4, /* 5,6,7,8 */
+ .tAA_ps = 13125,
+ .tWR_ps = 18000,
+ .tRCD_ps = 13125,
+ .tRRD_ps = 7500,
+ .tRP_ps = 13125,
+ .tRAS_ps = 37500,
+ .tRC_ps = 50625,
+ .tRFC_ps = 160000,
+ .tWTR_ps = 7500,
+ .tRTP_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tFAW_ps = 37500,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+ unsigned int controller_number,
+ unsigned int dimm_number)
+{
+ const char dimm_model[] = "Fixed DDR on board";
+
+ if ((controller_number == 0) && (dimm_number == 0)) {
+ memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+ }
+
+ return 0;
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ int i;
+ popts->clk_adjust = 6;
+ popts->cpo_override = 0x1f;
+ popts->write_data_delay = 2;
+ popts->half_strength_driver_enable = 1;
+ /* Write leveling override */
+ popts->wrlvl_en = 1;
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+ popts->wrlvl_start = 0x8;
+ popts->trwt_override = 1;
+ popts->trwt = 0;
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+ popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+ }
+}
+
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_4M,
+ LAW_TRGT_IF_DPAA_SWP_SRAM),
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Authors: Roy Zang <tie-fei.zang@freescale.com>
+ * Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_portals.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ fsl_lbc_t *lbc = LBC_BASE_ADDR;
+
+ /* Set ABSWP to implement conversion of addresses in the LBC */
+ setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ printf("Board: P1023 RDB\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+#endif
+
+int board_early_init_r(void)
+{
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash + PROMJET region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+ setup_portals();
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(ulong dummy)
+{
+ return gd->bus_clk;
+}
+
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+ return gd->mem_clk;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+
+ /*
+ * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting
+ * is not correct.
+ */
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1);
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+
+ fm_info_set_mdio(FM1_DTSEC1,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+ fm_info_set_mdio(FM1_DTSEC2,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+
+#ifdef CONFIG_FMAN_ENET
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+ fdt_fixup_dr_usb(blob, bd);
+#endif
+
+ fdt_fixup_fman_ethernet(blob);
+}
+#endif
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_4M, 1),
+
+ /* W**G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
+ CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
+ CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256K, 1),
+
+ /* Bman/Qman */
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+ MAS3_SW|MAS3_SR, 0,
+ 0, 7, BOOKE_PAGESZ_1M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000,
+ CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 8, BOOKE_PAGESZ_1M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_M,
+ 0, 9, BOOKE_PAGESZ_1M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000,
+ CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_1M, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 11, BOOKE_PAGESZ_16K, 1),
+
+#ifdef CONFIG_SYS_RAMBOOT
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE,
+ CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 12, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
+ CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 13, BOOKE_PAGESZ_256M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+ /*
+ * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
+ * space is at 0xfff00000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
+ CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_1M, 1),
#else
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 17, BOOKE_PAGESZ_4K, 1),
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+ /*
+ * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
+ * fetching ucode and ENV from master
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
+ CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+ 0, 18, BOOKE_PAGESZ_1M, 1),
+#endif
};
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
/* MII mode defines */
#define RMII_MODE_ENABLE 0x4D
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-/* UART Defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static const struct ddr_data ddr3_data = {
.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
/* Enable RTC32K clock */
rtc32k_enable();
- /* UART softreset */
- u32 regval;
-
enable_uart0_pin_mux();
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_RESET;
- writel(regval, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_SMART_IDLE_EN;
- writel(regval, &uart_base->uartsyscfg);
-
+ uart_soft_reset();
gd = &gdata;
preloader_console_init();
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-/* UART defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
/* DDR RAM defines */
#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
/* Enable RTC32K clock */
rtc32k_enable();
- /* UART softreset */
- u32 regval;
-
enable_uart0_pin_mux();
-
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_RESET;
- writel(regval, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) & UART_CLK_RUNNING_MASK)
- != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_SMART_IDLE_EN;
- writel(regval, &uart_base->uartsyscfg);
+ uart_soft_reset();
gd = &gdata;
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
+ mmc0 = "/mmc@12200000";
+ mmc1 = "/mmc@12210000";
+ mmc2 = "/mmc@12220000";
+ mmc3 = "/mmc@12230000";
};
sromc@12250000 {
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
};
+
+ mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <0>;
+ };
+
+ mmc@12210000 {
+ status = "disabled";
+ };
+
+ mmc@12220000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <1 2 3>;
+ samsung,removable = <1>;
+ };
+
+ mmc@12230000 {
+ status = "disabled";
+ };
};
1:
/* for UART */
bl uart_asm_init
+ bl arch_cpu_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
+ bl arch_cpu_init
bl tzpc_init
exit_wakeup:
nop
nop
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
- ldr r0, =TZPC0_BASE
- mov r1, #R0SIZE
- str r1, [r0]
- mov r1, #DECPROTXSET
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC1_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC2_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC3_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC4_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC5_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- mov pc, lr
#define UBRDIV_OFFSET 0x28
#define UFRACVAL_OFFSET 0x2C
-/* TZPC : Register Offsets */
-#define TZPC0_BASE 0x10110000
-#define TZPC1_BASE 0x10120000
-#define TZPC2_BASE 0x10130000
-#define TZPC3_BASE 0x10140000
-#define TZPC4_BASE 0x10150000
-#define TZPC5_BASE 0x10160000
-
-#define TZPC_DECPROT0SET_OFFSET 0x804
-#define TZPC_DECPROT1SET_OFFSET 0x810
-#define TZPC_DECPROT2SET_OFFSET 0x81C
-#define TZPC_DECPROT3SET_OFFSET 0x828
-
/* CLK_SRC_CPU */
#define MUX_HPM_SEL_MOUTAPLL 0x0
#define MUX_HPM_SEL_SCLKMPLL 0x1
* UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
*/
#define UFRACVAL_VAL 0x4
-
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE 0x0
-
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET 0xFF
#endif
COBJS := clock_init.o
COBJS += dmc_common.o dmc_init_ddr3.o
-COBJS += tzpc_init.o
COBJS += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_OF_CONTROL
+COBJS += exynos5-dt.o
+else
COBJS += smdk5250.o
endif
+endif
ifdef CONFIG_SPL_BUILD
COBJS += spl_boot.o
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include <asm/arch/spl.h>
+#include <asm/arch/dwmmc.h>
#include "clock_init.h"
#include "setup.h"
+#define FSYS1_MMC0_DIV_MASK 0xff0f
+#define FSYS1_MMC0_DIV_VAL 0x0701
+
DECLARE_GLOBAL_DATA_PTR;
struct arm_clk_ratios arm_clk_ratios[] = {
/* We run DP at 267 Mhz */
setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
}
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
+ */
+void emmc_boot_clk_div_set(void)
+{
+ struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+ unsigned int div_mmc;
+
+ div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
+ div_mmc |= FSYS1_MMC0_DIV_VAL;
+ writel(div_mmc, (unsigned int) &clk->div_fsys1);
+}
* Initialize clock for the device
*/
void system_clock_init(void);
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ */
+void emmc_boot_clk_div_set(void);
#endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <spi.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include <asm/arch/sromc.h>
+#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <tmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined CONFIG_EXYNOS_TMU
+/*
+ * Boot Time Thermal Analysis for SoC temperature threshold breach
+ */
+static void boot_temp_check(void)
+{
+ int temp;
+
+ switch (tmu_monitor(&temp)) {
+ /* Status TRIPPED ans WARNING means corresponding threshold breach */
+ case TMU_STATUS_TRIPPED:
+ puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+ set_ps_hold_ctrl();
+ hang();
+ break;
+ case TMU_STATUS_WARNING:
+ puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+ break;
+ /*
+ * TMU_STATUS_INIT means something is wrong with temperature sensing
+ * and TMU status was changed back from NORMAL to INIT.
+ */
+ case TMU_STATUS_INIT:
+ default:
+ debug("EXYNOS_TMU: Unknown TMU state\n");
+ }
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_EXYNOS
+int board_usb_vbus_init(void)
+{
+ struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
+
+ /* Enable VBUS power switch */
+ s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+
+ /* VBUS turn ON time */
+ mdelay(3);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOUND_MAX98095
+static void board_enable_audio_codec(void)
+{
+ struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
+
+ /* Enable MAX98095 Codec */
+ s5p_gpio_direction_output(&gpio1->x1, 7, 1);
+ s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+}
+#endif
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+
+#if defined CONFIG_EXYNOS_TMU
+ if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+ debug("%s: Failed to init TMU\n", __func__);
+ return -1;
+ }
+ boot_temp_check();
+#endif
+
+#ifdef CONFIG_EXYNOS_SPI
+ spi_init();
+#endif
+#ifdef CONFIG_USB_EHCI_EXYNOS
+ board_usb_vbus_init();
+#endif
+#ifdef CONFIG_SOUND_MAX98095
+ board_enable_audio_codec();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ int i;
+ u32 addr;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+ }
+ return 0;
+}
+
+#if defined(CONFIG_POWER)
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+ u32 val;
+ int ret = 0;
+
+ ret = pmic_reg_read(p, reg, &val);
+ if (ret) {
+ debug("%s: PMIC %d register read failed\n", __func__, reg);
+ return -1;
+ }
+ val |= regval;
+ ret = pmic_reg_write(p, reg, val);
+ if (ret) {
+ debug("%s: PMIC %d register write failed\n", __func__, reg);
+ return -1;
+ }
+ return 0;
+}
+
+int power_init_board(void)
+{
+ struct pmic *p;
+
+ set_ps_hold_ctrl();
+
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ if (pmic_init(I2C_PMIC))
+ return -1;
+
+ p = pmic_get("MAX77686_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+ MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+ return -1;
+
+ /* VDD_MIF */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+ MAX77686_BUCK1OUT_1V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK1OUT);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+ MAX77686_BUCK1CTRL_EN))
+ return -1;
+
+ /* VDD_ARM */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+ MAX77686_BUCK2DVS1_1_3V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK2DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+ MAX77686_BUCK2CTRL_ON))
+ return -1;
+
+ /* VDD_INT */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+ MAX77686_BUCK3DVS1_1_0125V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK3DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_G3D */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+ MAX77686_BUCK4DVS1_1_2V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK4DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_LDO2 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+ MAX77686_LD02CTRL1_1_5V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO3 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+ MAX77686_LD03CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO5 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+ MAX77686_LD05CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO10 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+ MAX77686_LD10CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ return 0;
+}
+#endif
+
+void dram_init_banksize(void)
+{
+ int i;
+ u32 addr, size;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+
+ gd->bd->bi_dram[i].start = addr;
+ gd->bd->bi_dram[i].size = size;
+ }
+}
+
+static int decode_sromc(const void *blob, struct fdt_sromc *config)
+{
+ int err;
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
+ if (node < 0) {
+ debug("Could not find SROMC node\n");
+ return node;
+ }
+
+ config->bank = fdtdec_get_int(blob, node, "bank", 0);
+ config->width = fdtdec_get_int(blob, node, "width", 2);
+
+ err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
+ FDT_SROM_TIMING_COUNT);
+ if (err < 0) {
+ debug("Could not decode SROMC configuration Error: %s\n",
+ fdt_strerror(err));
+ return -FDT_ERR_NOTFOUND;
+ }
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+ u32 smc_bw_conf, smc_bc_conf;
+ struct fdt_sromc config;
+ fdt_addr_t base_addr;
+ int node;
+
+ node = decode_sromc(gd->fdt_blob, &config);
+ if (node < 0) {
+ debug("%s: Could not find sromc configuration\n", __func__);
+ return 0;
+ }
+ node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
+ if (node < 0) {
+ debug("%s: Could not find lan9215 configuration\n", __func__);
+ return 0;
+ }
+
+ /* We now have a node, so any problems from now on are errors */
+ base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
+ if (base_addr == FDT_ADDR_T_NONE) {
+ debug("%s: Could not find lan9215 address\n", __func__);
+ return -1;
+ }
+
+ /* Ethernet needs data bus width of 16 bits */
+ if (config.width != 2) {
+ debug("%s: Unsupported bus width %d\n", __func__,
+ config.width);
+ return -1;
+ }
+ smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
+ | SROMC_BYTE_ENABLE(config.bank);
+
+ smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |
+ SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
+ SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
+ SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
+ SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |
+ SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
+ SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
+
+ /* Select and configure the SROMC bank */
+ exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
+ s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
+ return smc911x_initialize(0, base_addr);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ const char *board_name;
+
+ board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+ if (board_name == NULL)
+ printf("\nUnknown Board\n");
+ else
+ printf("\nBoard: %s\n", board_name);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ int ret;
+ /* dwmmc initializattion for available channels */
+ ret = exynos_dwmmc_init(gd->fdt_blob);
+ if (ret)
+ debug("dwmmc init failed\n");
+
+ return ret;
+}
+#endif
+
+static int board_uart_init(void)
+{
+ int err, uart_id, ret = 0;
+
+ for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+ err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART%d not configured\n",
+ (uart_id - PERIPH_ID_UART0));
+ ret |= err;
+ }
+ }
+ return ret;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int err;
+ err = board_uart_init();
+ if (err) {
+ debug("UART init failed\n");
+ return err;
+ }
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+ board_i2c_init(gd->fdt_blob);
+#endif
+ return err;
+}
+#endif
+
+#ifdef CONFIG_LCD
+void exynos_cfg_lcd_gpio(void)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
+
+ /* For Backlight */
+ s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
+ s5p_gpio_set_value(&gpio1->b2, 0, 1);
+
+ /* LCD power on */
+ s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
+ s5p_gpio_set_value(&gpio1->x1, 5, 1);
+
+ /* Set Hotplug detect for DP */
+ s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+}
+
+void exynos_set_dp_phy(unsigned int onoff)
+{
+ set_dp_phy_ctrl(onoff);
+}
+#endif
bl mem_ctrl_init
1:
+ bl arch_cpu_init
bl tzpc_init
ldmia r13!, {ip,pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_init
+ bl arch_cpu_init
bl tzpc_init
exit_wakeup:
#include <config.h>
#include <asm/arch/dmc.h>
-/* TZPC : Register Offsets */
-#define TZPC0_BASE 0x10100000
-#define TZPC1_BASE 0x10110000
-#define TZPC2_BASE 0x10120000
-#define TZPC3_BASE 0x10130000
-#define TZPC4_BASE 0x10140000
-#define TZPC5_BASE 0x10150000
-#define TZPC6_BASE 0x10160000
-#define TZPC7_BASE 0x10170000
-#define TZPC8_BASE 0x10180000
-#define TZPC9_BASE 0x10190000
-
/* APLL_CON1 */
#define APLL_CON1_VAL (0x00203800)
/* CLK_GATE_IP_DISP1 */
#define CLK_GATE_DP1_ALLOW (1 << 4)
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE 0x0
-
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET 0xFF
-
#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
void sdelay(unsigned long);
void mem_ctrl_init(void);
void system_clock_init(void);
-void tzpc_init(void);
#endif
#include <netdev.h>
#include <spi.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/dp_info.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
-#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
-#if defined CONFIG_EXYNOS_TMU
-/*
- * Boot Time Thermal Analysis for SoC temperature threshold breach
- */
-static void boot_temp_check(void)
-{
- int temp;
-
- switch (tmu_monitor(&temp)) {
- /* Status TRIPPED ans WARNING means corresponding threshold breach */
- case TMU_STATUS_TRIPPED:
- puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
- set_ps_hold_ctrl();
- hang();
- break;
- case TMU_STATUS_WARNING:
- puts("EXYNOS_TMU: WARNING! Temperature very high\n");
- break;
- /*
- * TMU_STATUS_INIT means something is wrong with temperature sensing
- * and TMU status was changed back from NORMAL to INIT.
- */
- case TMU_STATUS_INIT:
- default:
- debug("EXYNOS_TMU: Unknown TMU state\n");
- }
-}
-#endif
-
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_vbus_init(void)
{
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
-#if defined CONFIG_EXYNOS_TMU
- if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
- debug("%s: Failed to init TMU\n", __func__);
- return -1;
- }
- boot_temp_check();
-#endif
-
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
int dram_init(void)
{
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
+ int i;
+ u32 addr;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+ }
return 0;
}
void dram_init_banksize(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
- PHYS_SDRAM_2_SIZE);
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
- PHYS_SDRAM_3_SIZE);
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
- PHYS_SDRAM_4_SIZE);
- gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
- gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
- PHYS_SDRAM_5_SIZE);
- gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
- gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
- PHYS_SDRAM_6_SIZE);
- gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
- gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
- PHYS_SDRAM_7_SIZE);
- gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
- gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
- PHYS_SDRAM_8_SIZE);
-}
-
-#ifdef CONFIG_OF_CONTROL
-static int decode_sromc(const void *blob, struct fdt_sromc *config)
-{
- int err;
- int node;
-
- node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
- if (node < 0) {
- debug("Could not find SROMC node\n");
- return node;
- }
-
- config->bank = fdtdec_get_int(blob, node, "bank", 0);
- config->width = fdtdec_get_int(blob, node, "width", 2);
-
- err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
- FDT_SROM_TIMING_COUNT);
- if (err < 0) {
- debug("Could not decode SROMC configuration\n");
- return -FDT_ERR_NOTFOUND;
+ int i;
+ u32 addr, size;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+ gd->bd->bi_dram[i].start = addr;
+ gd->bd->bi_dram[i].size = size;
}
-
- return 0;
}
-#endif
int board_eth_init(bd_t *bis)
{
struct fdt_sromc config;
fdt_addr_t base_addr;
-#ifdef CONFIG_OF_CONTROL
- int node;
-
- node = decode_sromc(gd->fdt_blob, &config);
- if (node < 0) {
- debug("%s: Could not find sromc configuration\n", __func__);
- return 0;
- }
- node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
- if (node < 0) {
- debug("%s: Could not find lan9215 configuration\n", __func__);
- return 0;
- }
-
- /* We now have a node, so any problems from now on are errors */
- base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
- if (base_addr == FDT_ADDR_T_NONE) {
- debug("%s: Could not find lan9215 address\n", __func__);
- return -1;
- }
-#else
/* Non-FDT configuration - bank number and timing parameters*/
config.bank = CONFIG_ENV_SROM_BANK;
config.width = 2;
config.timing[FDT_SROM_TACP] = 0x09;
config.timing[FDT_SROM_PMC] = 0x01;
base_addr = CONFIG_SMC911X_BASE;
-#endif
/* Ethernet needs data bus width of 16 bits */
if (config.width != 2) {
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
-#ifdef CONFIG_OF_CONTROL
- const char *board_name;
-
- board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
- if (board_name == NULL)
- printf("\nUnknown Board\n");
- else
- printf("\nBoard: %s\n", board_name);
-#else
printf("\nBoard: SMDK5250\n");
-#endif
return 0;
}
#endif
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- int err;
+ int err, ret = 0, index, bus_width;
+ u32 base;
err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
- if (err) {
+ if (err)
debug("SDMMC0 not configured\n");
- return err;
- }
-
- err = s5p_mmc_init(0, 8);
- return err;
+ ret |= err;
+
+ /*EMMC: dwmmc Channel-0 with 8 bit bus width */
+ index = 0;
+ base = samsung_get_base_mmc() + (0x10000 * index);
+ bus_width = 8;
+ err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
+ if (err)
+ debug("dwmmc Channel-0 init failed\n");
+ ret |= err;
+
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+ if (err)
+ debug("SDMMC2 not configured\n");
+ ret |= err;
+
+ /*SD: dwmmc Channel-2 with 4 bit bus width */
+ index = 2;
+ base = samsung_get_base_mmc() + (0x10000 * index);
+ bus_width = 4;
+ err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
+ if (err)
+ debug("dwmmc Channel-2 init failed\n");
+ ret |= err;
+
+ return ret;
}
#endif
static int board_uart_init(void)
{
- int err;
-
- err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART0 not configured\n");
- return err;
+ int err, uart_id, ret = 0;
+
+ for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+ err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART%d not configured\n",
+ (uart_id - PERIPH_ID_UART0));
+ ret |= err;
+ }
}
-
- err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART1 not configured\n");
- return err;
- }
-
- err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART2 not configured\n");
- return err;
- }
-
- err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART3 not configured\n");
- return err;
- }
-
- return 0;
+ return ret;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
return err;
}
#ifdef CONFIG_SYS_I2C_INIT_BOARD
- board_i2c_init(gd->fdt_blob);
+ board_i2c_init(NULL);
#endif
return err;
}
set_dp_phy_ctrl(onoff);
}
-#ifndef CONFIG_OF_CONTROL
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 2560,
.edp_dev_info = &edp_info,
};
-#endif
void init_panel_info(vidinfo_t *vid)
{
-#ifndef CONFIG_OF_CONTROL
- vid->rgb_mode = MODE_RGB_P,
-
+ vid->rgb_mode = MODE_RGB_P;
exynos_set_dp_platform_data(&dp_platform_data);
-#endif
}
#endif
#include<common.h>
#include<config.h>
+#include <asm/arch-exynos/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+
+#include "clock_init.h"
+
+/* Index into irom ptr table */
+enum index {
+ MMC_INDEX,
+ EMMC44_INDEX,
+ EMMC44_END_INDEX,
+ SPI_INDEX,
+ USB_INDEX,
+};
+
+/* IROM Function Pointers Table */
+u32 irom_ptr_table[] = {
+ [MMC_INDEX] = 0x02020030, /* iROM Function Pointer-SDMMC boot */
+ [EMMC44_INDEX] = 0x02020044, /* iROM Function Pointer-EMMC4.4 boot*/
+ [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
+ -EMMC4.4 end boot operation */
+ [SPI_INDEX] = 0x02020058, /* iROM Function Pointer-SPI boot */
+ [USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/
+ };
+
enum boot_mode {
BOOT_MODE_MMC = 4,
BOOT_MODE_SERIAL = 20,
+ BOOT_MODE_EMMC = 8, /* EMMC4.4 */
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,
BOOT_MODE_USB, /* Boot using USB download */
};
- typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
- typedef u32 (*usb_copy_func_t)(void);
+void *get_irom_func(int index)
+{
+ return (void *)*(u32 *)irom_ptr_table[index];
+}
/*
* Set/clear program flow prediction and return the previous state.
*/
void copy_uboot_to_ram(void)
{
- spi_copy_func_t spi_copy;
- usb_copy_func_t usb_copy;
-
int is_cr_z_set;
unsigned int sec_boot_check;
enum boot_mode bootmode = BOOT_MODE_OM;
- u32 (*copy_bl2)(u32, u32, u32);
+
+ u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
+ u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
+ u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
+ void (*end_bootop_from_emmc)(void);
+ u32 (*usb_copy)(void);
/* Read iRAM location to check for secondary USB boot mode */
sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
switch (bootmode) {
case BOOT_MODE_SERIAL:
- spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
+ spi_copy = get_irom_func(SPI_INDEX);
spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
- CONFIG_SYS_TEXT_BASE);
+ CONFIG_SYS_TEXT_BASE);
break;
case BOOT_MODE_MMC:
- copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
+ copy_bl2 = get_irom_func(MMC_INDEX);
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
- CONFIG_SYS_TEXT_BASE);
+ CONFIG_SYS_TEXT_BASE);
+ break;
+ case BOOT_MODE_EMMC:
+ /* Set the FSYS1 clock divisor value for EMMC boot */
+ emmc_boot_clk_div_set();
+
+ copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
+ end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
+
+ copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+ end_bootop_from_emmc();
break;
case BOOT_MODE_USB:
/*
* before copy from USB device to RAM
*/
is_cr_z_set = config_branch_prediction(0);
- usb_copy = *(usb_copy_func_t *)
- EXYNOS_COPY_USB_FNPTR_ADDR;
+ usb_copy = get_irom_func(USB_INDEX);
usb_copy();
config_branch_prediction(is_cr_z_set);
break;
while (1)
;
}
-
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
1:
/* for UART */
bl uart_asm_init
+ bl arch_cpu_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
+ bl arch_cpu_init
bl tzpc_init
exit_wakeup:
nop
nop
nop
-
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
- ldr r0, =0x10110000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10120000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10130000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10140000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10150000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10160000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- mov pc, lr
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
return 0;
}
-/* UART Defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static const struct ddr_data ddr2_data = {
.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
(MT47H128M16RT25E_RD_DQS<<20) |
/* Enable RTC32K clock */
rtc32k_enable();
- /* UART softreset */
- u32 regVal;
-
#ifdef CONFIG_SERIAL1
enable_uart0_pin_mux();
#endif /* CONFIG_SERIAL1 */
enable_uart5_pin_mux();
#endif /* CONFIG_SERIAL6 */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
+ uart_soft_reset();
gd = &gdata;
#endif
#define PANDA_ULPI_PHY_TYPE_GPIO 182
+#define PANDA_BOARD_ID_1_GPIO 101
+#define PANDA_ES_BOARD_ID_1_GPIO 48
+#define PANDA_BOARD_ID_2_GPIO 171
+#define PANDA_ES_BOARD_ID_3_GPIO 3
+#define PANDA_ES_BOARD_ID_4_GPIO 2
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+/*
+* Routine: get_board_revision
+* Description: Detect if we are running on a panda revision A1-A6,
+* or an ES panda board. This can be done by reading
+* the level of GPIOs and checking the processor revisions.
+* This should result in:
+* Panda 4430:
+* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
+* GPIO171, GPIO101, GPIO182: 1 0 1 => A6
+* Panda ES:
+* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
+* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
+*/
+int get_board_revision(void)
+{
+ int board_id0, board_id1, board_id2;
+ int board_id3, board_id4;
+ int board_id;
+
+ int processor_rev = omap_revision();
+
+ /* Setup the mux for the common board ID pins (gpio 171 and 182) */
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
+
+ board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
+ board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+
+ if ((processor_rev >= OMAP4460_ES1_0 &&
+ processor_rev <= OMAP4460_ES1_1)) {
+ /*
+ * Setup the mux for the ES specific board ID pins (gpio 101,
+ * 2 and 3.
+ */
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ GPMC_A24);
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ UNIPRO_RY0);
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ UNIPRO_RX1);
+
+ board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
+ board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
+ board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
+#endif
+ board_id = ((board_id4 << 4) | (board_id3 << 3) |
+ (board_id2 << 2) | (board_id1 << 1) | (board_id0));
+ } else {
+ /* Setup the mux for the Ax specific board ID pins (gpio 101) */
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ FREF_CLK2_OUT);
+
+ board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
+ board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-a4"));
+#endif
+ }
+
+ return board_id;
+}
+
/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
if (omap_revision() == OMAP4430_ES1_0)
return 0;
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- if (omap_revision() >= OMAP4460_ES1_0 ||
- omap_revision() <= OMAP4460_ES1_1)
- setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
-#endif
+ get_board_revision();
gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, &scrm->auxclk3);
- } else {
+ } else {
/* ULPI PHY supplied by auxclk1 derived from PER dpll */
debug("ULPI PHY supplied by auxclk1\n");
if (omap_revision() >= OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_essential_4460,
- sizeof(wkup_padconf_array_essential_4460) /
- sizeof(struct pad_conf_entry));
+ wkup_padconf_array_essential_4460,
+ sizeof(wkup_padconf_array_essential_4460) /
+ sizeof(struct pad_conf_entry));
}
void set_muxconf_regs_non_essential(void)
if (omap_revision() < OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_core_base,
- core_padconf_array_non_essential_4430,
- sizeof(core_padconf_array_non_essential_4430) /
- sizeof(struct pad_conf_entry));
+ core_padconf_array_non_essential_4430,
+ sizeof(core_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
else
do_set_mux((*ctrl)->control_padconf_core_base,
- core_padconf_array_non_essential_4460,
- sizeof(core_padconf_array_non_essential_4460) /
- sizeof(struct pad_conf_entry));
+ core_padconf_array_non_essential_4460,
+ sizeof(core_padconf_array_non_essential_4460) /
+ sizeof(struct pad_conf_entry));
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential,
if (omap_revision() < OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_non_essential_4430,
- sizeof(wkup_padconf_array_non_essential_4430) /
- sizeof(struct pad_conf_entry));
+ wkup_padconf_array_non_essential_4430,
+ sizeof(wkup_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
}
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
#ifdef CONFIG_SPL_BUILD
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* UART Defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static void uart_enable(void)
{
- u32 regVal;
-
/* UART softreset */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
+ uart_soft_reset();
}
static void wdt_disable(void)
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
. = ALIGN(0x800);
_end = .;
}
/DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
/DISCARD/ : { *(.dynamic*) }
P1022DS_SDCARD powerpc mpc85xx p1022ds freescale - P1022DS:SDCARD
P1022DS_36BIT_SDCARD powerpc mpc85xx p1022ds freescale - P1022DS:36BIT,SDCARD
P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT
+P1023RDB powerpc mpc85xx p1023rdb freescale - P1023RDB
P1023RDS powerpc mpc85xx p1023rds freescale - P1023RDS
P1023RDS_NAND powerpc mpc85xx p1023rds freescale - P1023RDS:NAND
P1024RDB powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB
P5040DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P5040DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH
+BSC9131RDB_SPIFLASH_SYSCLK100 powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH,SYS_CLK_100
+BSC9131RDB_NAND powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,NAND
+BSC9131RDB_NAND_SYSCLK100 powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,NAND,SYS_CLK_100
BSC9132QDS_NOR_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100
BSC9132QDS_NOR_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133
+BSC9132QDS_NAND_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,NAND,SYS_CLK_100_DDR_100
+BSC9132QDS_NAND_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,NAND,SYS_CLK_100_DDR_133
BSC9132QDS_SDCARD_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100
BSC9132QDS_SDCARD_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133
BSC9132QDS_SPIFLASH_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100
T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240
T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+T4240QDS_SRIO_PCIE_BOOT powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
T4160QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160
T4160QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
T4160QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
B4860QDS powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860
B4860QDS_NAND powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
B4860QDS_SPIFLASH powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+B4860QDS_SRIO_PCIE_BOOT powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
B4420QDS powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4420
B4420QDS_NAND powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4420,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
B4420QDS_SPIFLASH powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
COBJS-y += cmd_boot.o
COBJS-$(CONFIG_CMD_BOOTM) += cmd_bootm.o
COBJS-y += cmd_help.o
-COBJS-y += cmd_nvedit.o
COBJS-y += cmd_version.o
# environment
COBJS-y += env_attr.o
COBJS-y += env_callback.o
-COBJS-y += env_common.o
COBJS-y += env_flags.o
COBJS-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o
COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o
COBJS-$(CONFIG_CMD_ZFS) += cmd_zfs.o
# others
-ifdef CONFIG_DDR_SPD
-SPD := y
-endif
-ifdef CONFIG_SPD_EEPROM
-SPD := y
-endif
-COBJS-$(SPD) += ddr_spd.o
-COBJS-$(CONFIG_HWCONFIG) += hwconfig.o
COBJS-$(CONFIG_BOOTSTAGE) += bootstage.o
COBJS-$(CONFIG_CONSOLE_MUX) += iomux.o
COBJS-y += flash.o
endif
ifdef CONFIG_SPL_BUILD
-COBJS-y += cmd_nvedit.o
-COBJS-y += env_common.o
COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_attr.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_callback.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_flags.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
+# environment
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
+ifneq ($(CONFIG_SPL_NET_SUPPORT),y)
+COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
+COBJS-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
+COBJS-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
+COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
+COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
+else
+COBJS-y += env_nowhere.o
+endif
endif
+# core command
+COBJS-y += cmd_nvedit.o
+#environment
+COBJS-y += env_common.o
+#others
+ifdef CONFIG_DDR_SPD
+SPD := y
+endif
+ifdef CONFIG_SPD_EEPROM
+SPD := y
+endif
+COBJS-$(SPD) += ddr_spd.o
+COBJS-$(CONFIG_HWCONFIG) += hwconfig.o
COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
COBJS-y += console.o
COBJS-y += dlmalloc.o
"- display info of the current MMC device"
);
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
+ err = mmc_boot_part_access(mmc, ack, part_num, access);
+
+ if ((err == 0) && (access != 0)) {
+ printf("\t\t\t!!!Notice!!!\n");
+
+ printf("!You must close EMMC boot Partition");
+ printf("after all images are written\n");
+
+ printf("!EMMC boot partition has continuity");
+ printf("at image writing time.\n");
+
+ printf("!So, do not close the boot partition");
+ printf("before all images are written.\n");
+ return 0;
+ } else if ((err == 0) && (access == 0))
+ return 0;
+ else if ((err != 0) && (access != 0)) {
+ printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
+ return 1;
+ } else {
+ printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
+ return 1;
+ }
+}
+#endif
+
static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
enum mmc_state state;
curr_device, mmc->part_num);
return 0;
- }
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ } else if ((strcmp(argv[1], "open") == 0) ||
+ (strcmp(argv[1], "close") == 0)) {
+ int dev;
+ struct mmc *mmc;
+ u8 part_num, access = 0;
+
+ if (argc == 4) {
+ dev = simple_strtoul(argv[2], NULL, 10);
+ part_num = simple_strtoul(argv[3], NULL, 10);
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ mmc = find_mmc_device(dev);
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", dev);
+ return 1;
+ }
+ if (IS_SD(mmc)) {
+ printf("SD device cannot be opened/closed\n");
+ return 1;
+ }
+
+ if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
+ printf("Invalid boot partition number:\n");
+ printf("Boot partition number cannot be <= 0\n");
+ printf("EMMC44 supports only 2 boot partitions\n");
+ return 1;
+ }
+
+ if (strcmp(argv[1], "open") == 0)
+ access = part_num; /* enable R/W access to boot part*/
+ else
+ access = 0; /* No access to boot partition */
+
+ /* acknowledge to be sent during boot operation */
+ return boot_part_access(mmc, 1, part_num, access);
+
+ } else if (strcmp(argv[1], "bootpart") == 0) {
+ int dev;
+ dev = simple_strtoul(argv[2], NULL, 10);
+
+ u32 bootsize = simple_strtoul(argv[3], NULL, 10);
+ u32 rpmbsize = simple_strtoul(argv[4], NULL, 10);
+ struct mmc *mmc = find_mmc_device(dev);
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", dev);
+ return 1;
+ }
+
+ if (IS_SD(mmc)) {
+ printf("It is not a EMMC device\n");
+ return 1;
+ }
+
+ if (0 == mmc_boot_partition_size_change(mmc,
+ bootsize, rpmbsize)) {
+ printf("EMMC boot partition Size %d MB\n", bootsize);
+ printf("EMMC RPMB partition Size %d MB\n", rpmbsize);
+ return 0;
+ } else {
+ printf("EMMC boot partition Size change Failed.\n");
+ return 1;
+ }
+#endif /* CONFIG_SUPPORT_EMMC_BOOT */
+ }
state = MMC_INVALID;
if (argc == 5 && strcmp(argv[1], "read") == 0)
state = MMC_READ;
"mmc rescan\n"
"mmc part - lists available partition on current mmc device\n"
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
- "mmc list - lists available devices");
+ "mmc list - lists available devices\n"
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ "mmc open <dev> <boot_partition>\n"
+ " - Enable boot_part for booting and enable R/W access of boot_part\n"
+ "mmc close <dev> <boot_partition>\n"
+ " - Enable boot_part for booting and disable access to boot_part\n"
+ "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
+ " - change sizes of boot and RPMB partions of specified device\n"
#endif
+ );
+#endif /* !CONFIG_GENERIC_MMC */
e) Slave's RCW should configure the SerDes for SRIO or PCIE boot port, set
the boot location to SRIO or PCIE, and holdoff all the cores.
- ---------- ----------- -----------
- | | | | | |
- | | | | | |
+ ----------- ----------- -----------
+ | | | | | |
+ | | | | | |
| NorFlash|<----->| Master |SRIO or PCIE | Slave |<---->[EEPROM]
- | | | |<===========>| |
- | | | | | |
- ---------- ----------- -----------
+ | | | |<===========>| |
+ | | | | | |
+ ----------- ----------- -----------
The example based on P4080DS platform:
Two P4080DS platforms can be used to implement the boot from SRIO or PCIE.
Please refer to the examples given above.
2. U-Boot image's compilation.
- For master, U-Boot image should be generated normally.
+ For master, U-Boot image should be generated normally.
- For example, master U-Boot image used on P4080DS should be compiled with
+ For example, master U-Boot image used on P4080DS should be compiled with
make P4080DS_config.
- For slave, U-Boot image should be generated specifically by
+ For slave, U-Boot image should be generated specifically by
make xxxx_SRIO_PCIE_BOOT_config.
- For example, slave U-Boot image used on P4080DS should be compiled with
+ For example, slave U-Boot image used on P4080DS should be compiled with
make P4080DS_SRIO_PCIE_BOOT_config.
3. Necessary modifications based on a specific environment.
- For a specific environment, the addresses of the slave's U-Boot image,
- UCode, ENV stored in master's NorFlash, and any other configurations
- can be modified in the file:
- include/configs/corenet_ds.h.
+ For a specific environment, the addresses of the slave's U-Boot image,
+ UCode, ENV stored in master's NorFlash, and any other configurations
+ can be modified in the file:
+ include/configs/corenet_ds.h.
4. Set and save the environment variable "bootmaster" with "SRIO1", "SRIO2"
or "PCIE1", "PCIE2", "PCIE3" for master, and then restart it in order to
perform the role as a master for boot from SRIO or PCIE.
+
+NOTE: When the Slave's ENV parameters are stored in Master's NorFlash,
+ it can fetch them through PCIE or SRIO interface. But the ENV
+ parameters can not be modified by "saveenv" or other commands under
+ the Slave's u-boot environment, because the Slave can not erase,
+ write Master's NorFlash by PCIE or SRIO link.
--- /dev/null
+* Exynos 5250 DWC_mobile_storage
+
+The Exynos 5250 provides DWC_mobile_storage interface which supports
+. Embedded Multimedia Cards (EMMC-version 4.5)
+. Secure Digital memory (SD mem-version 2.0)
+. Secure Digital I/O (SDIO-version 3.0)
+. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
+
+The Exynos 5250 DWC_mobile_storage provides four channels.
+SOC specific and Board specific properties are channel specific.
+
+Required SoC Specific Properties:
+
+- compatible: should be
+ - samsung,exynos5250-dwmmc: for exynos5250 platforms
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- samsung,bus-width: The width of the bus used to interface the devices
+ supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
+ . Typically the bus width is 4 or 8.
+- samsung,timing: The timing values to be written into the
+ Drv/sample clock selection register of corresponding channel.
+ . It is comprised of 3 values corresponding to the 3 fileds
+ 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
+ . SelClk_sample: Select sample clock among 8 shifted clocks.
+ . SelClk_drv: Select drv clock among 8 shifted clocks.
+ . DIVRATIO: Clock Divide ratio select.
+ . The above 3 values are used by the clock phase shifter.
+
+Example:
+
+mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <1>;
+}
+In the above example,
+ . The bus width is 8
+ . Timing is comprised of 3 values as explained below
+ 1 - SelClk_sample
+ 3 - SelClk_drv
+ 3 - DIVRATIO
+ . The 'removable' flag indicates whether the the particilar device
+ cannot be removed (always present) or it is a removable device.
+ 1 - Indicates that the device is removable.
+ 0 - Indicates that the device cannot be removed.
unsigned int timeout = 100000;
u32 retry = 10000;
u32 mask, ctrl;
+ ulong start = get_timer(0);
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
- if (timeout == 0) {
+ if (get_timer(start) > timeout) {
printf("Timeout on data busy\n");
return TIMEOUT;
}
- timeout--;
}
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
if (data)
dwmci_prepare_data(host, data);
-
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
if (data)
int timeout = 10000;
unsigned long sclk;
- if (freq == host->clock)
+ if ((freq == host->clock) || (freq == 0))
return 0;
-
/*
* If host->mmc_clk didn't define,
* then assume that host->bus_hz is source clock value.
static int dwmci_init(struct mmc *mmc)
{
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
- u32 fifo_size, fifoth_val;
+ u32 fifo_size;
dwmci_writel(host, DWMCI_PWREN, 1);
return -1;
}
+ /* Enumerate at 400KHz */
+ dwmci_setup_bus(host, mmc->f_min);
+
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
dwmci_writel(host, DWMCI_INTMASK, 0);
dwmci_writel(host, DWMCI_IDINTEN, 0);
dwmci_writel(host, DWMCI_BMOD, 1);
- fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
- if (host->fifoth_val)
- fifoth_val = host->fifoth_val;
- else
- fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
- TX_WMARK(fifo_size/2);
- dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+ if (!host->fifoth_val) {
+ fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+ fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+ host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+ TX_WMARK(fifo_size / 2);
+ }
+ dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
dwmci_writel(host, DWMCI_CLKENA, 0);
dwmci_writel(host, DWMCI_CLKSRC, 0);
*/
#include <common.h>
-#include <malloc.h>
#include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
-static char *EXYNOS_NAME = "EXYNOS DWMMC";
+#define DWMMC_MAX_CH_NUM 4
+#define DWMMC_MAX_FREQ 52000000
+#define DWMMC_MIN_FREQ 400000
+#define DWMMC_MMC0_CLKSEL_VAL 0x03030001
+#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
static void exynos_dwmci_clksel(struct dwmci_host *host)
{
- u32 val;
- val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
- DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
+ dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+}
- dwmci_writel(host, DWMCI_CLKSEL, val);
+unsigned int exynos_dwmci_get_clk(int dev_index)
+{
+ return get_mmc_clk(dev_index);
}
-int exynos_dwmci_init(u32 regbase, int bus_width, int index)
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index - mmc channel number.
+ * regbase - register base address of mmc channel specified in 'index'.
+ * bus_width - operating bus width of mmc channel specified in 'index'.
+ * clksel - value to be written into CLKSEL register in case of FDT.
+ * NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
{
struct dwmci_host *host = NULL;
+ unsigned int div;
+ unsigned long freq, sclk;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return 1;
}
+ /* request mmc clock vlaue of 52MHz. */
+ freq = 52000000;
+ sclk = get_mmc_clk(index);
+ div = DIV_ROUND_UP(sclk, freq);
+ /* set the clock divisor for mmc */
+ set_mmc_clk(index, div);
- host->name = EXYNOS_NAME;
+ host->name = "EXYNOS DWMMC";
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
+
+ if (clksel) {
+ host->clksel_val = clksel;
+ } else {
+ if (0 == index)
+ host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+ if (2 == index)
+ host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+ }
+
host->clksel = exynos_dwmci_clksel;
host->dev_index = index;
+ host->mmc_clk = exynos_dwmci_get_clk;
+ /* Add the mmc channel to be registered with mmc core */
+ if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+ debug("dwmmc%d registration failed\n", index);
+ return -1;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob)
+{
+ int index, bus_width;
+ int node_list[DWMMC_MAX_CH_NUM];
+ int err = 0, dev_id, flag, count, i;
+ u32 clksel_val, base, timing[3];
+
+ count = fdtdec_find_aliases_for_id(blob, "mmc",
+ COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+ DWMMC_MAX_CH_NUM);
+
+ for (i = 0; i < count; i++) {
+ int node = node_list[i];
+
+ if (node <= 0)
+ continue;
- add_dwmci(host, 52000000, 400000);
+ /* Extract device id for each mmc channel */
+ dev_id = pinmux_decode_periph_id(blob, node);
+ /* Get the bus width from the device node */
+ bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (bus_width <= 0) {
+ debug("DWMMC: Can't get bus-width\n");
+ return -1;
+ }
+ if (8 == bus_width)
+ flag = PINMUX_FLAG_8BIT_MODE;
+ else
+ flag = PINMUX_FLAG_NONE;
+
+ /* config pinmux for each mmc channel */
+ err = exynos_pinmux_config(dev_id, flag);
+ if (err) {
+ debug("DWMMC not configured\n");
+ return err;
+ }
+
+ index = dev_id - PERIPH_ID_SDMMC0;
+
+ /* Get the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("DWMMC: Can't get base address\n");
+ return -1;
+ }
+ /* Extract the timing info from the node */
+ err = fdtdec_get_int_array(blob, node, "samsung,timing",
+ timing, 3);
+ if (err) {
+ debug("Can't get sdr-timings for divider\n");
+ return -1;
+ }
+
+ clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ DWMCI_SET_DRV_CLK(timing[1]) |
+ DWMCI_SET_DIV_RATIO(timing[2]));
+ /* Initialise each mmc channel */
+ err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
+ if (err)
+ debug("dwmmc Channel-%d init failed\n", index);
+ }
return 0;
}
-
+#endif
do_preinit();
return 0;
}
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+/*
+ * This function changes the size of boot partition and the size of rpmb
+ * partition present on EMMC devices.
+ *
+ * Input Parameters:
+ * struct *mmc: pointer for the mmc device strcuture
+ * bootsize: size of boot partition
+ * rpmbsize: size of rpmb partition
+ *
+ * Returns 0 on success.
+ */
+
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+ unsigned long rpmbsize)
+{
+ int err;
+ struct mmc_cmd cmd;
+
+ /* Only use this command for raw EMMC moviNAND. Enter backdoor mode */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = MMC_CMD62_ARG1;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
+ return err;
+ }
+
+ /* Boot partition changing mode */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = MMC_CMD62_ARG2;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
+ return err;
+ }
+ /* boot partition size is multiple of 128KB */
+ bootsize = (bootsize * 1024) / 128;
+
+ /* Arg: boot partition size */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = bootsize;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
+ return err;
+ }
+ /* RPMB partition size is multiple of 128KB */
+ rpmbsize = (rpmbsize * 1024) / 128;
+ /* Arg: RPMB partition size */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = rpmbsize;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * This function shall form and send the commands to open / close the
+ * boot partition specified by user.
+ *
+ * Input Parameters:
+ * ack: 0x0 - No boot acknowledge sent (default)
+ * 0x1 - Boot acknowledge sent during boot operation
+ * part_num: User selects boot data that will be sent to master
+ * 0x0 - Device not boot enabled (default)
+ * 0x1 - Boot partition 1 enabled for boot
+ * 0x2 - Boot partition 2 enabled for boot
+ * access: User selects partitions to access
+ * 0x0 : No access to boot partition (default)
+ * 0x1 : R/W boot partition 1
+ * 0x2 : R/W boot partition 2
+ * 0x3 : R/W Replay Protected Memory Block (RPMB)
+ *
+ * Returns 0 on success.
+ */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
+ struct mmc_cmd cmd;
+
+ /* Boot ack enable, boot partition enable , boot partition access */
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_PART_CONF << 16) |
+ ((EXT_CSD_BOOT_ACK(ack) |
+ EXT_CSD_BOOT_PART_NUM(part_num) |
+ EXT_CSD_PARTITION_ACCESS(access)) << 8);
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ if (access) {
+ debug("mmc boot partition#%d open fail:Error1 = %d\n",
+ part_num, err);
+ } else {
+ debug("mmc boot partition#%d close fail:Error = %d\n",
+ part_num, err);
+ }
+ return err;
+ }
+
+ if (access) {
+ /* 4bit transfer mode at booting time. */
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_BOOT_BUS_WIDTH << 16) |
+ ((1 << 0) << 8);
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc boot partition#%d open fail:Error2 = %d\n",
+ part_num, err);
+ return err;
+ }
+ }
+ return 0;
+}
+#endif
else # minimal SPL drivers
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
endif # drivers
/*
- * NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine
+ * NAND boot for Freescale Integrated Flash Controller, NAND FCM
*
* Copyright 2011 Freescale Semiconductor, Inc.
* Author: Dipen Dudhat <dipen.dudhat@freescale.com>
unsigned int bufnum, int page_size)
{
u32 reg = eccstat[bufnum / 4];
- int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
+ int errors = (reg >> ((3 - bufnum % 4) * 8)) & 0xf;
- if (errors == 15) { /* uncorrectable */
+ if (errors == 0xf) { /* uncorrectable */
/* Blank pages fail hw ECC checks */
if (is_blank(buf, page_size))
return 1;
csor = CONFIG_SYS_NAND_CSOR;
cspr = CONFIG_SYS_NAND_CSPR;
- if (!(csor & CSOR_NAND_ECC_DEC_EN)) {
- /* soft ECC in SPL is unimplemented */
- puts("WARNING: soft ECC not checked in SPL\n");
- } else {
- u32 hwcsor;
-
- /* make sure board is configured with ECC on boot */
- hwcsor = in_be32(&ifc->csor_cs[0].csor);
- if (!(hwcsor & CSOR_NAND_ECC_DEC_EN))
- puts("WARNING: ECC not checked in SPL, "
- "check board cfg\n");
- }
-
port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
if (csor & CSOR_NAND_PGS_4K) {
page_size = 4096;
- bufnum_mask = 1;
+ bufnum_mask = 0x1;
} else if (csor & CSOR_NAND_PGS_2K) {
page_size = 2048;
- bufnum_mask = 3;
+ bufnum_mask = 0x3;
} else {
page_size = 512;
- bufnum_mask = 15;
+ bufnum_mask = 0xf;
if (port_size == 8)
bad_marker = 5;
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
- (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+ (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
} else {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+ NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
}
/* Program FBCR = 0 for full page read */
out_be32(&ifc->ifc_nand.col0, 0);
/* start read */
out_be32(&ifc->ifc_nand.nandseq_strt,
- IFC_NAND_SEQ_STRT_FIR_STRT);
+ IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for read to complete */
nand_wait(&buf[sram_addr], bufnum, page_size);
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
-
/*
* Load U-Boot image from NAND into RAM
*/
(uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
#endif
#endif
-
/*
* Jump to U-Boot image
*/
+#ifdef CONFIG_SPL_FLUSH_IMAGE
/*
* Clean d-cache and invalidate i-cache, to
* make sure that no stale data is executed.
*/
flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
+#endif
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}
COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o
+COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE) += gigadevice.o
COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o
COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o
COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o
--- /dev/null
+/*
+ * Gigadevice SPI flash driver
+ * Copyright 2013, Samsung Electronics Co., Ltd.
+ * Author: Banajit Goswami <banajit.g@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+struct gigadevice_spi_flash_params {
+ uint16_t id;
+ uint16_t nr_blocks;
+ const char *name;
+};
+
+static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
+ {
+ .id = 0x6016,
+ .nr_blocks = 64,
+ .name = "GD25LQ",
+ },
+ {
+ .id = 0x4017,
+ .nr_blocks = 128,
+ .name = "GD25Q64B",
+ },
+};
+
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
+{
+ const struct gigadevice_spi_flash_params *params;
+ struct spi_flash *flash;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
+ params = &gigadevice_spi_flash_table[i];
+ if (params->id == ((idcode[1] << 8) | idcode[2]))
+ break;
+ }
+
+ if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
+ debug("SF: Unsupported Gigadevice ID %02x%02x\n",
+ idcode[1], idcode[2]);
+ return NULL;
+ }
+
+ flash = spi_flash_alloc_base(spi, params->name);
+ if (!flash) {
+ debug("SF: Failed to allocate memory\n");
+ return NULL;
+ }
+ /* page_size */
+ flash->page_size = 256;
+ /* sector_size = page_size * pages_per_sector */
+ flash->sector_size = flash->page_size * 16;
+ /* size = sector_size * sector_per_block * number of blocks */
+ flash->size = flash->sector_size * 16 * params->nr_blocks;
+
+ return flash;
+}
#ifdef CONFIG_SPI_FLASH_EON
{ 0, 0x1c, spi_flash_probe_eon, },
#endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE
+ { 0, 0xc8, spi_flash_probe_gigadevice, },
+#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX
{ 0, 0xc2, spi_flash_probe_macronix, },
#endif
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode);
return 1;
}
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
static void fsl_pcie_boot_master(pit_t *pi)
{
/* configure inbound window for slave's u-boot image */
/* see if we are a PCIe or PCI controller */
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
/* boot from PCIE --master */
char *s = getenv("bootmaster");
char pcie[6];
if (fsl_is_pci_agent(hose)) {
fsl_pci_config_unlock(hose);
hose->last_busno = hose->first_busno;
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
} else {
/* boot from PCIE --master releases slave's core 0 */
char *s = getenv("bootmaster");
/* Tmeperature threshold values for various thermal events */
struct temperature_params {
/* minimum value in temperature code range */
- unsigned int min_val;
+ unsigned min_val;
/* maximum value in temperature code range */
- unsigned int max_val;
+ unsigned max_val;
/* temperature threshold to start warning */
- unsigned int start_warning;
+ unsigned start_warning;
/* temperature threshold CPU tripping */
- unsigned int start_tripping;
+ unsigned start_tripping;
/* temperature threshold for HW tripping */
- unsigned int hardware_tripping;
+ unsigned hardware_tripping;
};
/* Pre-defined values and thresholds for calibration of current temperature */
/* pre-defined temperature thresholds */
struct temperature_params ts;
/* pre-defined efuse range minimum value */
- unsigned int efuse_min_value;
+ unsigned efuse_min_value;
/* pre-defined efuse value for temperature calibration */
- unsigned int efuse_value;
+ unsigned efuse_value;
/* pre-defined efuse range maximum value */
- unsigned int efuse_max_value;
+ unsigned efuse_max_value;
/* current temperature sensing slope */
- unsigned int slope;
+ unsigned slope;
};
/* TMU device specific details and status */
struct tmu_info {
/* base Address for the TMU */
- unsigned tmu_base;
+ struct exynos5_tmu_reg *tmu_base;
+ /* mux Address for the TMU */
+ int tmu_mux;
/* pre-defined values for calibration and thresholds */
struct tmu_data data;
/* value required for triminfo_25 calibration */
- unsigned int te1;
+ unsigned te1;
/* value required for triminfo_85 calibration */
- unsigned int te2;
+ unsigned te2;
/* Value for measured data calibration */
int dc_value;
/* enum value indicating status of the TMU */
*/
static int get_cur_temp(struct tmu_info *info)
{
- int cur_temp;
- struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+ struct exynos5_tmu_reg *reg = info->tmu_base;
+ ulong start;
+ int cur_temp = 0;
/*
* Temperature code range between min 25 and max 125.
* May run more than once for first call as initial sensing
* has not yet happened.
*/
- do {
- cur_temp = readl(®->current_temp) & 0xff;
- } while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
+ if (info->tmu_state == TMU_STATUS_NORMAL) {
+ start = get_timer(0);
+ do {
+ cur_temp = readl(®->current_temp) & 0xff;
+ } while ((cur_temp == 0) || (get_timer(start) > 100));
+ }
+
+ if (cur_temp == 0)
+ return cur_temp;
/* Calibrate current temperature */
cur_temp = cur_temp - info->te1 + info->dc_value;
/* Read current temperature of the SOC */
cur_temp = get_cur_temp(&gbl_info);
+
+ if (!cur_temp)
+ goto out;
+
*temp = cur_temp;
/* Temperature code lies between min 25 and max 125 */
- if (cur_temp >= data->ts.start_tripping &&
- cur_temp <= data->ts.max_val) {
+ if ((cur_temp >= data->ts.start_tripping) &&
+ (cur_temp <= data->ts.max_val))
return TMU_STATUS_TRIPPED;
- } else if (cur_temp >= data->ts.start_warning) {
+
+ if (cur_temp >= data->ts.start_warning)
return TMU_STATUS_WARNING;
- } else if (cur_temp < data->ts.start_warning &&
- cur_temp >= data->ts.min_val) {
+
+ if ((cur_temp < data->ts.start_warning) &&
+ (cur_temp >= data->ts.min_val))
return TMU_STATUS_NORMAL;
- } else {
- /* Temperature code does not lie between min 25 and max 125 */
- gbl_info.tmu_state = TMU_STATUS_INIT;
- debug("EXYNOS_TMU: Thermal reading failed\n");
- return TMU_STATUS_INIT;
- }
+
+ out:
+ /* Temperature code does not lie between min 25 and max 125 */
+ gbl_info.tmu_state = TMU_STATUS_INIT;
+ debug("EXYNOS_TMU: Thermal reading failed\n");
+ return TMU_STATUS_INIT;
}
/*
static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
{
#ifdef CONFIG_OF_CONTROL
+ fdt_addr_t addr;
int node;
int error = 0;
* miscalculation of register values in tmu_setup_parameters
* may result in misleading current temperature.
*/
- info->tmu_base = fdtdec_get_addr(blob, node, "reg");
- if (info->tmu_base == FDT_ADDR_T_NONE) {
+ addr = fdtdec_get_addr(blob, node, "reg");
+ if (addr == FDT_ADDR_T_NONE) {
debug("%s: Missing tmu-base\n", __func__);
return -1;
}
+ info->tmu_base = (struct exynos5_tmu_reg *)addr;
+
+ /* Optional field. */
+ info->tmu_mux = fdtdec_get_int(blob,
+ node, "samsung,mux", -1);
+ /* Take default value as per the user manual b(110) */
+ if (info->tmu_mux == -1)
+ info->tmu_mux = 0x6;
+
info->data.ts.min_val = fdtdec_get_int(blob,
node, "samsung,min-temp", -1);
- error |= info->data.ts.min_val;
+ error |= (info->data.ts.min_val == -1);
info->data.ts.max_val = fdtdec_get_int(blob,
node, "samsung,max-temp", -1);
- error |= info->data.ts.max_val;
+ error |= (info->data.ts.max_val == -1);
info->data.ts.start_warning = fdtdec_get_int(blob,
node, "samsung,start-warning", -1);
- error |= info->data.ts.start_warning;
+ error |= (info->data.ts.start_warning == -1);
info->data.ts.start_tripping = fdtdec_get_int(blob,
node, "samsung,start-tripping", -1);
- error |= info->data.ts.start_tripping;
+ error |= (info->data.ts.start_tripping == -1);
info->data.ts.hardware_tripping = fdtdec_get_int(blob,
node, "samsung,hw-tripping", -1);
- error |= info->data.ts.hardware_tripping;
+ error |= (info->data.ts.hardware_tripping == -1);
info->data.efuse_min_value = fdtdec_get_int(blob,
node, "samsung,efuse-min-value", -1);
- error |= info->data.efuse_min_value;
+ error |= (info->data.efuse_min_value == -1);
info->data.efuse_value = fdtdec_get_int(blob,
node, "samsung,efuse-value", -1);
- error |= info->data.efuse_value;
+ error |= (info->data.efuse_value == -1);
info->data.efuse_max_value = fdtdec_get_int(blob,
node, "samsung,efuse-max-value", -1);
- error |= info->data.efuse_max_value;
+ error |= (info->data.efuse_max_value == -1);
info->data.slope = fdtdec_get_int(blob,
node, "samsung,slope", -1);
- error |= info->data.slope;
+ error |= (info->data.slope == -1);
info->dc_value = fdtdec_get_int(blob,
node, "samsung,dc-value", -1);
- error |= info->dc_value;
+ error |= (info->dc_value == -1);
- if (error == -1) {
+ if (error) {
debug("fail to get tmu node properties\n");
return -1;
}
+#else
+ /* Non DT support may never be added. Just in case */
+ return -1;
#endif
return 0;
*/
static void tmu_setup_parameters(struct tmu_info *info)
{
- unsigned int te_code, con;
- unsigned int warning_code, trip_code, hwtrip_code;
- unsigned int cooling_temp;
- unsigned int rising_value;
+ unsigned te_code, con;
+ unsigned warning_code, trip_code, hwtrip_code;
+ unsigned cooling_temp;
+ unsigned rising_value;
struct tmu_data *data = &info->data;
- struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+ struct exynos5_tmu_reg *reg = info->tmu_base;
/* Must reload for reading efuse value from triminfo register */
writel(TRIMINFO_RELOAD, ®->triminfo_control);
/* TMU core enable */
con = readl(®->tmu_control);
- con |= THERM_TRIP_EN | CORE_EN;
+ con |= THERM_TRIP_EN | CORE_EN | (info->tmu_mux << 20);
writel(con, ®->tmu_control);
tmu_setup_parameters(&gbl_info);
gbl_info.tmu_state = TMU_STATUS_NORMAL;
ret:
-
return gbl_info.tmu_state;
}
DECLARE_GLOBAL_DATA_PTR;
+#define RX_FIFO_COUNT_MASK 0xff
+#define RX_FIFO_FULL_MASK (1 << 8)
+#define TX_FIFO_FULL_MASK (1 << 24)
+
static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
u32 offset = dev_index * sizeof(struct s5p_uart);
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
- /* reset and enable FIFOs, set triggers to the maximum */
- writel(0, &uart->ufcon);
+ /* enable FIFOs */
+ writel(0x1, &uart->ufcon);
writel(0, &uart->umcon);
/* 8N1 */
writel(0x3, &uart->ulcon);
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
/* wait for character to arrive */
- while (!(readl(&uart->utrstat) & 0x1)) {
+ while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ RX_FIFO_FULL_MASK))) {
if (serial_err_check(dev_index, 0))
return 0;
}
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
/* wait for room in the tx FIFO */
- while (!(readl(&uart->utrstat) & 0x2)) {
+ while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (serial_err_check(dev_index, 1))
return;
}
#ifdef CONFIG_OF_CONTROL
if (exynos_fimd_parse_dt(gd->fdt_blob))
debug("Can't get proper panel info\n");
-#endif
+#else
/* initialize parameters which is specific to panel. */
init_panel_info(&panel_info);
-
+#endif
panel_width = panel_info.vl_width;
panel_height = panel_info.vl_height;
extern ulong _rel_dyn_start_ofs;
extern ulong _rel_dyn_end_ofs;
-/* Start/end of the relocation symbol table, as an offset from _start */
-extern ulong _dynsym_start_ofs;
-
/* End of the region to be relocated, as an offset form _start */
extern ulong _image_copy_end_ofs;
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#endif
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
/* High Level Configuration Options */
#define CONFIG_BOOKE
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
#endif
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
#ifdef CONFIG_SYS_NO_FLASH
+#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_ENV_IS_NOWHERE
+#endif
#else
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#endif
-#ifndef CONFIG_SYS_NO_FLASH
#if defined(CONFIG_SPIFLASH)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR 0xffe20000
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
-#else /* CONFIG_SYS_NO_FLASH */
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-#endif
#ifndef __ASSEMBLY__
unsigned long get_board_sys_clk(void);
/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4)
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \
- FTIM0_NOR_TEADC(0x01) | \
+ FTIM0_NOR_TEADC(0x04) | \
FTIM0_NOR_TEAHC(0x20))
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
FTIM1_NOR_TRAD_NOR(0x1A) |\
#elif defined(CONFIG_NAND)
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000
#else
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
#endif
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+
+#define CONFIG_SYS_TEXT_BASE 0x00201000
+#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
+#define CONFIG_SPL_MAX_SIZE 8192
+#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
+#define CONFIG_SPL_RELOC_STACK 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
#endif
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
+
+
/* High Level Configuration Options */
#define CONFIG_BOOKE /* BOOKE */
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */
+#if defined(CONFIG_SYS_CLK_100)
+#define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */
+#else
#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */
+#endif
#define CONFIG_HWCONFIG
/*
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */
/* CONFIG_SYS_IMMR */
+/* DSP CCSRBAR */
+#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
/*
* Memory map
*
* 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable
* 0x8800_0000 0x8810_0000 IFC internal SRAM 1M
+ * 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M
* 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M
* 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K
* 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K
* 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K
+ * 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M
* 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
* 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M
*
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
/*
* Environment
*/
-#if defined(CONFIG_SYS_RAMBOOT)
#if defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_SIZE 0x2000
-#else
-#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE 0x2000
-#endif
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#elif defined(CONFIG_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
+#elif defined(CONFIG_SYS_RAMBOOT)
+#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE 0x400
+#define CONFIG_ENV_SIZE 0x2000
#endif
#define CONFIG_LOADS_ECHO /* echo on for serial download */
"fdtfile=bsc9131rdb.dtb\0" \
"bdev=sda1\0" \
"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
- "othbootargs=ramdisk_size=600000 \0" \
+ "bootm_size=0x37000000\0" \
+ "othbootargs=ramdisk_size=600000 " \
+ "default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
"usbext2boot=setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs; " \
"usb start;" \
#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
#endif
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+
+#define CONFIG_SYS_TEXT_BASE 0x00201000
+#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
+#define CONFIG_SPL_MAX_SIZE 8192
+#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
+#define CONFIG_SPL_RELOC_STACK 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#endif
+
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x8ff80000
#endif
#define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc
#endif
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
-
/* High Level Configuration Options */
#define CONFIG_BOOKE /* BOOKE */
#define CONFIG_E500 /* BOOKE e500 family */
* IFC Definitions
*/
/* NOR Flash on IFC */
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NO_FLASH
+#endif
#define CONFIG_SYS_FLASH_BASE 0x88000000
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_FSL_QIXIS
+#endif
#ifdef CONFIG_FSL_QIXIS
#define CONFIG_SYS_FPGA_BASE 0xffb00000
#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
#endif
/* Set up IFC registers for boot location NOR/NAND */
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#else
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
+#endif
#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
#define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
/*
* Environment
*/
-#if defined(CONFIG_SYS_RAMBOOT)
#if defined(CONFIG_RAMBOOT_SDCARD)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_SIZE 0x2000
-#else
+#elif defined(CONFIG_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
+#elif defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE 0x2000
-#endif
#else
#define CONFIG_ENV_IS_IN_FLASH
#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
#define CONFIG_PHYS_64BIT
#endif
-#ifdef CONFIG_P1010RDB
#define CONFIG_P1010
+#define CONFIG_E500 /* BOOKE e500 family */
+#include <asm/config_mpc85xx.h>
#define CONFIG_NAND_FSL_IFC
-#endif
#ifdef CONFIG_SDCARD
#define CONFIG_RAMBOOT_SDCARD
#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
#endif
-#ifdef CONFIG_NAND /* NAND Boot */
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE_SPL 0xff800000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL
-#else
-#define CONFIG_SYS_TEXT_BASE 0x11001000
-#endif /* CONFIG_NAND_SPL */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+
+#define CONFIG_SYS_TEXT_BASE 0x00201000
+#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
+#define CONFIG_SPL_MAX_SIZE 8192
+#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
+#define CONFIG_SPL_RELOC_STACK 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
#endif
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
/* High Level Configuration Options */
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
/* Don't relocate CCSRBAR while in NAND_SPL */
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
#endif
* IFC Definitions
*/
/* NOR Flash on IFC */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NO_FLASH
+#endif
+
#define CONFIG_SYS_FLASH_BASE 0xee000000
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
#define CONFIG_SYS_NAND_DDR_LAW 11
/* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SECBOOT)
+#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
#endif
-/* NAND boot: 8K NAND loader config */
-#define CONFIG_SYS_NAND_SPL_SIZE 0x2000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x10000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
/* CPLD on IFC */
#define CONFIG_SYS_CPLD_BASE 0xffb00000
#define CONFIG_SYS_CS3_FTIM3 0x0
#endif /* CONFIG_SDCARD */
-#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
- defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)\
+ && !defined(CONFIG_SECURE_BOOT)
+#define CONFIG_A003399_NOR_WORKAROUND
+#endif
+#endif
+
#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
#define CONFIG_NS16550_MIN_FUNCTIONS
#endif
* SPI interface will not be available in case of NAND boot SPI CS0 will be
* used for SLIC
*/
-#if !defined(CONFIG_NAND_U_BOOT) || !defined(CONFIG_NAND_SECBOOT)
+#if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
/* eSPI - Enhanced SPI */
#define CONFIG_FSL_ESPI
#define CONFIG_SPI_FLASH
/*
* Environment
*/
-#if defined(CONFIG_SYS_RAMBOOT)
#if defined(CONFIG_RAMBOOT_SDCARD)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_FSL_FIXED_MMC_LOCATION
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_SIZE 0x2000
-#elif defined(CONFIG_NAND_U_BOOT)
+#elif defined(CONFIG_NAND)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_U_BOOT_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
-#else
+#elif defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE 0x2000
-#endif
#else
#define CONFIG_ENV_IS_IN_FLASH
#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Authors: Roy Zang <tie-fei.zang@freescale.com>
+ * Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff80000
+#endif
+
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE /* BOOKE */
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_MPC85xx
+#define CONFIG_P1023
+#define CONFIG_MP /* support multiple processors */
+
+#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
+#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_clock_freq(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 66666666
+#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_HWCONFIG
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x02000000
+
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/* Implement conversion of addresses in the LBC */
+#define CONFIG_SYS_LBC_LBCR 0x00000000
+#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
+
+/* DDR Setup */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
+
+#define CONFIG_DDR_SPD
+#define CONFIG_FSL_DDR3
+#define CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_SYS_SDRAM_SIZE 512u /* DDR is 512M */
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define SPD_EEPROM_ADDRESS 0x50
+#define CONFIG_SYS_DDR_RAW_TIMING
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x1fff_ffff DDR 512M cacheable
+ * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
+ * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
+ * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
+ * 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M cacheable
+ * 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable
+ * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable TLB0
+ *
+ * Localbus non-cacheable
+ *
+ * 0xec00_0000 0xefff_ffff NOR flash 64M non-cacheable
+ * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
+ */
+
+/*
+ * Local Bus Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE 0xec000000 /* start of FLASH 64M */
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+ | BR_PS_16 | BR_V)
+#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */
+#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
+
+#define CONFIG_SYS_NAND_BASE 0xffa00000
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \
+ | OR_FCM_PGS \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR)
+
+#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#endif
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+
+#define CONFIG_CMD_I2C
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 3, Slot 1, tgtid 3, Base address b000 */
+#define CONFIG_SYS_PCIE3_NAME "Slot 3"
+#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
+#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000
+#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
+#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000
+#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 2, direct to uli, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME "Slot 2"
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 1, Slot 2, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME "Slot 1"
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+
+#if defined(CONFIG_PCI)
+#define CONFIG_E1000 /* Defind e1000 pci Ethernet card */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#endif /* CONFIG_PCI */
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR 0xfff80000
+#else
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+
+#define CONFIG_BAUDRATE 115200
+
+/* Qman/Bman */
+#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */
+#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000
+#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
+#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000
+#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
+
+/* For FM */
+#define CONFIG_SYS_DPAA_FMAN
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHY_ATHEROS
+#endif
+
+/* Default address of microcode for the Linux Fman driver */
+/* QE microcode/firmware address */
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xeff40000
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1
+#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x2
+
+#define CONFIG_SYS_TBIPA_VALUE 8
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_ETHPRIME "FM1@DTSEC1"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
+
+#endif /* __CONFIG_H */
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_DPAA_RMAN /* RMan */
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
-
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
-
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
-
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10)
#define CONFIG_SPL_OS_BOOT
+#define CONFIG_SPL_ENV_SUPPORT
/* Place patched DT blob (fdt) at this address */
#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000
"rdaddr=0x81000000\0" \
"bootdir=/boot\0" \
"bootfile=uImage\0" \
- "fdtfile=\0" \
+ "fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
- "setenv fdtfile am335x-evmsk.dtb; fi\0" \
-
+ "setenv fdtfile am335x-evmsk.dtb; fi " \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0"
#endif
#define CONFIG_BOOTCOMMAND \
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_OMAP_ABE_SYSCK
+
+#define CONSOLEDEV "ttyO0"
+
#endif /* __CONFIG_DRA7XX_EVM_H */
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
-#define TZPC_BASE_OFFSET 0x10000
-
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_SDHCI
#define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+
#define CONFIG_BOARD_EARLY_INIT_F
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 50000000
#define EXYNOS5_SPI_NUM_CONTROLLERS 5
#endif
/*
+ * Enable platform initialisation via misc_init_r() function
+ */
+#define CONFIG_MISC_INIT_R
+
+/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
+#if defined(CONFIG_NET2BIG_V2)
+#define CONFIG_SYS_I2C_G762_ADDR 0x3e
+#endif
#endif /* CONFIG_CMD_I2C */
/*
"console=ttyO2,115200n8\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
+ "fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
"setenv fdtfile omap4-sdp.dtb; fi; " \
"if test $board_name = panda; then " \
"setenv fdtfile omap4-panda.dtb; fi;" \
+ "if test $board_name = panda-a4; then " \
+ "setenv fdtfile omap4-panda-a4.dtb; fi;" \
"if test $board_name = panda-es; then " \
- "setenv fdtfile omap4-panda-es.dtb; fi; \0" \
+ "setenv fdtfile omap4-panda-es.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
#define CONFIG_BOOTCOMMAND \
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
+ "console=" CONSOLEDEV ",115200n8\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
+ "fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
"bootz ${loadaddr} - ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = omap5_uevm; then " \
- "setenv fdtfile omap5-uevm.dtb; fi;\0 " \
+ "setenv fdtfile omap5-uevm.dtb; fi; " \
+ "if test $board_name = dra7xx; then " \
+ "setenv fdtfile dra7-evm.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
#define CONFIG_BOOTCOMMAND \
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
-#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
+#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # "
+
+#define CONSOLEDEV "ttyO2"
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
#endif /* __CONFIG_OMAP5_EVM_H */
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SPL_TEXT_BASE 0x02021410
+
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
/* Miscellaneous configurable options */
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL"
#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x00002488
+#define CONFIG_SPL_TEXT_BASE 0x02021410
+
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
/* Miscellaneous configurable options */
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
#endif
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
#define CONFIG_CMD_REGINFO
/* High Level Configuration Options */
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
#ifdef CONFIG_SYS_NO_FLASH
+#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_ENV_IS_NOWHERE
+#endif
#else
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#endif
-#ifndef CONFIG_SYS_NO_FLASH
#if defined(CONFIG_SPIFLASH)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR 0xffe20000
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
-#else /* CONFIG_SYS_NO_FLASH */
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-#endif
-
-
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
#elif defined(CONFIG_NAND)
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000
#else
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
#define CONFIG_DFU_ALT \
"u-boot mmc 80 400;" \
- "uImage ext4 0 2\0" \
+ "uImage ext4 0 2;" \
+ "exynos4210-trats.dtb ext4 0 2\0"
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
- "run loaduimage; bootm 0x40007FC0\0" \
+ "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"updatemmc=" \
"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
"mmc boot 0 1 1 0\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
- "run loaduimage; bootm 0x40007FC0\0" \
+ "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+ "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr}" \
+ "${fdtfile}\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
- "setenv spl_addr_tmp;\0"
+ "setenv spl_addr_tmp;\0" \
+ "fdtaddr=40800000\0" \
+ "fdtfile=exynos4210-trats.dtb\0"
+
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_USB_GADGET_MASS_STORAGE
#endif
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+
#endif /* __CONFIG_H */
#define MSIZE(x) ((x) << 28)
#define RX_WMARK(x) ((x) << 16)
#define TX_WMARK(x) (x)
+#define RX_WMARK_SHIFT 16
+#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT)
#define DWMCI_IDMAC_OWN (1 << 31)
#define DWMCI_IDMAC_CH (1 << 4)
unsigned int bus_hz;
int dev_index;
int buswidth;
+ u32 clksel_val;
u32 fifoth_val;
struct mmc *mmc;
COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
+ COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
#define MMC_CMD_APP_CMD 55
#define MMC_CMD_SPI_READ_OCR 58
#define MMC_CMD_SPI_CRC_ON_OFF 59
+#define MMC_CMD_RES_MAN 62
+
+#define MMC_CMD62_ARG1 0xefac62ec
+#define MMC_CMD62_ARG2 0xcbaea7
+
#define SD_CMD_SEND_RELATIVE_ADDR 3
#define SD_CMD_SWITCH_FUNC 6
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
+#define EXT_CSD_BOOT_BUS_WIDTH 177
#define EXT_CSD_PART_CONF 179 /* R/W */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
+#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
+#define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
+#define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
+
+#define EXT_CSD_BOOT_ACK(x) (x << 6)
+#define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
+#define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
+
+
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
/* Maximum block size for MMC */
#define MMC_MAX_BLOCK_LEN 512
+/* The number of MMC physical partitions. These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION 2
+
struct mmc_cid {
unsigned long psn;
unsigned short oid;
int mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
void spl_mmc_load(void) __noreturn;
+/* Function to change the size of boot partition and rpmb partitions */
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+ unsigned long rpmbsize);
+/* Function to send commands to open/close the specified boot partition */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
/**
* Start device initialization and return immediately; it does not block on
LIB = $(obj)libgeneric.o
ifndef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
COBJS-$(CONFIG_AES) += aes.o
COBJS-$(CONFIG_BZIP2) += bzlib.o
COBJS-$(CONFIG_BZIP2) += bzlib_crctable.o
COBJS-$(CONFIG_USB_TTY) += circbuf.o
COBJS-y += crc7.o
COBJS-y += crc16.o
-COBJS-y += display_options.o
-COBJS-y += errno.o
COBJS-$(CONFIG_OF_CONTROL) += fdtdec.o
COBJS-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
COBJS-$(CONFIG_GZIP) += gunzip.o
COBJS-$(CONFIG_GZIP_COMPRESSED) += gzip.o
-COBJS-y += hashtable.o
COBJS-y += initcall.o
COBJS-$(CONFIG_LMB) += lmb.o
COBJS-y += ldiv.o
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += crc32.o
-ifneq ($(CONFIG_SPL_SPI_FLASH_SUPPORT)$(CONFIG_SPL_NET_SUPPORT),)
-COBJS-y += display_options.o
-endif
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += errno.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += hashtable.o
COBJS-$(CONFIG_SPL_NET_SUPPORT) += net_utils.o
endif
+COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
+COBJS-y += hashtable.o
+COBJS-y += errno.o
+COBJS-y += display_options.o
COBJS-$(CONFIG_BCH) += bch.o
COBJS-y += crc32.o
COBJS-y += ctype.o
COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
+ COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
+++ /dev/null
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-NAND_SPL := y
-CONFIG_SYS_TEXT_BASE_SPL := 0xff800000
-PAD_TO := 0xff802000
-
-include $(TOPDIR)/config.mk
-
-nandobj := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
- $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_NAND_SPL
-
-SOBJS = start.o resetvec.o ticks.o
-COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
- nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o
-
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(nandobj)board/$(BOARDDIR)
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
-
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \
- -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-# create symbolic links for common files
-
-$(obj)cache.c:
- @rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
-
-$(obj)cpu_init_early.c:
- @rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
-
-$(obj)spl_minimal.c:
- @rm -f $(obj)spl_minimal.c
- ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c
-
-$(obj)fsl_law.c:
- @rm -f $(obj)fsl_law.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
-
-$(obj)law.c:
- @rm -f $(obj)law.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
-
-$(obj)nand_boot_fsl_ifc.c:
- @rm -f $(obj)nand_boot_fsl_ifc.c
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_ifc.c \
- $(obj)nand_boot_fsl_ifc.c
-
-$(obj)ns16550.c:
- @rm -f $(obj)ns16550.c
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
-
-$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
-
-$(obj)fixed_ivor.S:
- @rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S
-
-$(obj)start.S: $(obj)fixed_ivor.S
- @rm -f $(obj)start.S
- ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S
-
-$(obj)ticks.S:
- @rm -f $(obj)ticks.S
- ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
-
-$(obj)tlb.c:
- @rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c
-
-$(obj)tlb_table.c:
- @rm -f $(obj)tlb_table.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
-
-ifneq ($(OBJTREE), $(SRCTREE))
-$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
-endif
-
-#########################################################################
-
-$(obj)%.o: $(obj)%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(obj)%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
endif
+ifneq ($(CONFIG_MX23)$(CONFIG_MX35),)
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
+endif
+
+ifeq ($(SOC),exynos)
+LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
+endif
+
# Add GCC lib
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o
#include "pblimage.h"
/*
- * The PBL can load up to 64 bytes at a time, so we split the U-Boot
- * image into 64 byte chunks. PBL needs a command for each piece, of
- * the form "81xxxxxx", where "xxxxxx" is the offset. SYS_TEXT_BASE
- * is 0xFFF80000 for PBL boot, and PBL only cares about low 24-bit,
- * so it starts from 0x81F80000.
+ * Initialize to an invalid value.
*/
-static uint32_t next_pbl_cmd = 0x81F80000;
+static uint32_t next_pbl_cmd = 0x82000000;
/*
* need to store all bytes in memory for calculating crc32, then write the
* bytes to image file for PBL boot.
*/
-static unsigned char mem_buf[600000];
+static unsigned char mem_buf[1000000];
static unsigned char *pmem_buf = mem_buf;
static int pbl_size;
static char *fname = "Unknown";
#define ENDIANNESS ((char)endian_test.l)
+/*
+ * The PBL can load up to 64 bytes at a time, so we split the U-Boot
+ * image into 64 byte chunks. PBL needs a command for each piece, of
+ * the form "81xxxxxx", where "xxxxxx" is the offset. Calculate the
+ * start offset by subtracting the size of the u-boot image from the
+ * top of the allowable 24-bit range.
+ */
+static void init_next_pbl_cmd(FILE *fp_uboot)
+{
+ struct stat st;
+ int fd = fileno(fp_uboot);
+
+ if (fstat(fd, &st) == -1) {
+ printf("Error: Could not determine u-boot image size. %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ next_pbl_cmd = 0x82000000 - st.st_size;
+}
+
static void generate_pbl_cmd(void)
{
uint32_t val = next_pbl_cmd;
/* load split u-boot with PBI command 81xxxxxx. */
static void load_uboot(FILE *fp_uboot)
{
+ init_next_pbl_cmd(fp_uboot);
while (next_pbl_cmd < 0x82000000) {
generate_pbl_cmd();
pbl_fget(64, fp_uboot);
projects / platform / kernel / u-boot.git / commitdiff