ARM: kirkwood: Add device-tree for dockstar
authorChris Packham <judge.packham@gmail.com>
Tue, 8 May 2018 10:34:12 +0000 (22:34 +1200)
committerStefan Roese <sr@denx.de>
Thu, 17 May 2018 15:35:25 +0000 (17:35 +0200)
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
arch/arm/dts/kirkwood-dockstar.dts [new file with mode: 0644]
configs/dockstar_defconfig

diff --git a/arch/arm/dts/kirkwood-dockstar.dts b/arch/arm/dts/kirkwood-dockstar.dts
new file mode 100644 (file)
index 0000000..6a3f1bf
--- /dev/null
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "Seagate FreeAgent Dockstar";
+       compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x8000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+               stdout-path = &uart0;
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       pmx_usb_power_enable: pmx-usb-power-enable {
+                               marvell,pins = "mpp29";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_green: pmx-led-green {
+                               marvell,pins = "mpp46";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_orange: pmx-led-orange {
+                               marvell,pins = "mpp47";
+                               marvell,function = "gpio";
+                       };
+               };
+               serial@12000 {
+                       status = "ok";
+               };
+       };
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+               pinctrl-names = "default";
+
+               health {
+                       label = "status:green:health";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               fault {
+                       label = "status:orange:fault";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-0 = <&pmx_usb_power_enable>;
+               pinctrl-names = "default";
+
+               usb_power: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "USB Power";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio0 29 0>;
+               };
+       };
+};
+
+&nand {
+       status = "okay";
+
+       partition@0 {
+               label = "u-boot";
+               reg = <0x0000000 0x100000>;
+               read-only;
+       };
+
+       partition@100000 {
+               label = "uImage";
+               reg = <0x0100000 0x400000>;
+       };
+
+       partition@500000 {
+               label = "data";
+               reg = <0x0500000 0xfb00000>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "marvell,88e1116";
+               reg = <0>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
+};
index b7a65db..1ed5cfe 100644 (file)
@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_TARGET_DOCKSTAR=y
 CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dockstar"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="DockStar> "
@@ -19,6 +20,7 @@ CONFIG_CMD_JFFS2=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),-(root)"
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 # CONFIG_MMC is not set
 CONFIG_NETDEVICES=y
@@ -27,4 +29,3 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y