Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig

This converts the following to Kconfig:
   CONFIG_EHCI_HCD_INIT_AFTER_RESET

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8e0ecc5..5d0855f 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -260,9 +260,12 @@ config USB_EHCI_GENERIC
        ---help---
          Enables support for generic EHCI controller.
 
+config EHCI_HCD_INIT_AFTER_RESET
+       bool
+
 config USB_EHCI_FSL
        bool  "Support for FSL on-chip EHCI USB controller"
-       select  CONFIG_EHCI_HCD_INIT_AFTER_RESET
+       select EHCI_HCD_INIT_AFTER_RESET
        ---help---
          Enables support for the on-chip EHCI controller on FSL chips.
 endif # USB_EHCI_HCD

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index d356ff9..01e6266 100644 (file)
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -307,7 +307,6 @@
  */
 
 #define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_NETDEV          "eth1"
 

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index ce63e64..3773b12 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -492,12 +492,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_HAS_FSL_DR_USB
 
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-#endif
-
 /*
  * Environment
  */

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 9cce6cf..dfe92bc 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -379,10 +379,6 @@
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_HAS_FSL_MPH_USB
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 618b8ed..43cf604 100644 (file)
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -401,10 +401,6 @@
  */
 #define CONFIG_HAS_FSL_DR_USB
 
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 /*
  * SDHC
  */

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 3f4e59f..da0a4f2 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -405,12 +405,6 @@
 */
 #define CONFIG_HAS_FSL_DR_USB
 
-#ifdef CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-#endif
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index b4a91ea..dfe9192 100644 (file)
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -475,7 +475,6 @@
  * USB
  */
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_HAS_FSL_DR_USB
 #endif
 

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 84e5d5d..a5a30d8 100644 (file)
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -431,7 +431,6 @@
  * USB
  */
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_HAS_FSL_DR_USB
 #endif
 

diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 2ab1b64..7690bee 100644 (file)
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -448,7 +448,6 @@
 /*
 * USB
 */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_HAS_FSL_DR_USB
 
 #ifdef CONFIG_MMC

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 2864405..d0e0e65 100644 (file)
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -38,7 +38,6 @@
 /* USB Configs */
 /* Host */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 /* Client */

diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
index de4f440..0c44f74 100644 (file)
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -420,7 +420,6 @@
 /* DMA stuff, needed for GPMI/MXS NAND support */
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 

diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h
index 7b110f0..19276cc 100644 (file)
--- a/include/configs/brppt2.h
+++ b/include/configs/brppt2.h
@@ -86,7 +86,6 @@ BUR_COMMON_ENV \
 #define CONFIG_FEC_FIXED_SPEED         _1000BASET
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 
 /* SPL */

diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
index b19b3ef..c63c5eb 100644 (file)
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@@ -102,7 +102,6 @@
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index cb4cd92..07ad6fd 100644 (file)
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -148,7 +148,6 @@
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 
 /* SATA */
 #define CONFIG_LBA48

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 0459cb0..da5b8a6 100644 (file)
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -135,7 +135,6 @@
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index d7d5c2d..f62a3f6 100644 (file)
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -28,7 +28,6 @@
 /* USB Configs */
 /* Host */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 /* Client */

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 180142a..d78a273 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -179,7 +179,6 @@
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 32e2aab..664c538 100644 (file)
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -98,7 +98,6 @@
 
 /* USB Host Support */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 /* USB DFU */
 

diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 9291b81..54e79b1 100644 (file)
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -377,10 +377,6 @@
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_HAS_FSL_MPH_USB
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT

diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h
index d502e98..9f27072 100644 (file)
--- a/include/configs/dart_6ul.h
+++ b/include/configs/dart_6ul.h
@@ -50,7 +50,6 @@
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index b495826..298a88c 100644 (file)
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -41,7 +41,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2 /* Enabled USB controller number */

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index ed46f26..26a714c 100644 (file)
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -22,10 +22,6 @@
 
 /* UART */
 
-/* Fixup - in init code we switch from device to host mode,
- * it has to be done after each HCD reset */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 1) \

diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 00996f5..7526d3b 100644 (file)
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -18,7 +18,6 @@
 #define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 

diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h
index 252ab5e..61ca5f8 100644 (file)
--- a/include/configs/ge_b1x5v2.h
+++ b/include/configs/ge_b1x5v2.h
@@ -29,7 +29,6 @@
 #endif
 
 /* USB */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */

diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 26d171d..6aa6c62 100644 (file)
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -55,7 +55,6 @@
 /* Various command support */
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS      0
 #define CONFIG_USBD_HS

diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index 592c62a..6b1c678 100644 (file)
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -122,7 +122,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Enabled USB controller number */

diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h
index c4eebb5..2707ae6 100644 (file)
--- a/include/configs/imx6dl-mamoj.h
+++ b/include/configs/imx6dl-mamoj.h
@@ -45,7 +45,6 @@
 #define CONFIG_FEC_MXC_PHYADDR         1
 
 /* USB */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC                  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS                   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                2

diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h
index 785ac7c..e904a10 100644 (file)
--- a/include/configs/imx6q-bosch-acc.h
+++ b/include/configs/imx6q-bosch-acc.h
@@ -111,7 +111,6 @@
 #endif
 #endif
 
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC            (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS             0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT  1     /* Enabled USB controller number */

diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
index 7135a83..9b84730 100644 (file)
--- a/include/configs/imx8mm-cl-iot-gate.h
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -141,7 +141,6 @@
 #define CONFIG_FEC_MXC_PHYADDR         0
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 

diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h
index b6e68f8..d046849 100644 (file)
--- a/include/configs/kontron-sl-mx6ul.h
+++ b/include/configs/kontron-sl-mx6ul.h
@@ -29,7 +29,6 @@
 #define CONFIG_HOSTNAME                        "kontron-mx6ul"
 
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h
index c4be62c..e28bfb8 100644 (file)
--- a/include/configs/kontron-sl-mx8mm.h
+++ b/include/configs/kontron-sl-mx8mm.h
@@ -26,7 +26,6 @@
 #define CONFIG_HOSTNAME                        "kontron-mx8mm"
 
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
index 5b25be5..a513213 100644 (file)
--- a/include/configs/kp_imx6q_tpc.h
+++ b/include/configs/kp_imx6q_tpc.h
@@ -21,7 +21,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2 /* Enabled USB controller number */

diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h
index 3c03368..fa178fb 100644 (file)
--- a/include/configs/liteboard.h
+++ b/include/configs/liteboard.h
@@ -98,7 +98,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1

diff --git a/include/configs/meerkat96.h b/include/configs/meerkat96.h
index 0ccfe7d..c6ce883 100644 (file)
--- a/include/configs/meerkat96.h
+++ b/include/configs/meerkat96.h
@@ -24,7 +24,6 @@
 /* Environment configs */
 
 /* USB configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 
 #endif

diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index d120c7c..d0cf6a2 100644 (file)
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -17,7 +17,6 @@
 
 /* USB Configs */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 

diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 2f4332a..18d5d49 100644 (file)
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -36,7 +36,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Enabled USB controller number */

diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index e03226d..837742b 100644 (file)
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -94,7 +94,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 2724924..b3a786d 100644 (file)
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -97,7 +97,6 @@
 #define CONFIG_FEC_MXC_PHYADDR          0x0
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fda5b03..a5596d9 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -124,7 +124,6 @@
 #define CONFIG_FEC_MXC_PHYADDR          0x1
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index 44e6fd0..7c76290 100644 (file)
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -119,7 +119,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h
index fb685ec..d1dc445 100644 (file)
--- a/include/configs/mys_6ulx.h
+++ b/include/configs/mys_6ulx.h
@@ -34,7 +34,6 @@
 #define CONFIG_SYS_NAND_BASE           0x40000000
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3aa21a2..72f2dfb 100644 (file)
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -33,7 +33,6 @@
 
 /* USB Configs */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 

diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h
index 1fc4b87..b3de418 100644 (file)
--- a/include/configs/npi_imx6ull.h
+++ b/include/configs/npi_imx6ull.h
@@ -35,7 +35,6 @@
 #define CONFIG_SYS_NAND_BASE           0x40000000
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 75e84c3..cce5556 100644 (file)
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -40,9 +40,6 @@
 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
-/* USB UHH support options */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
 /* Enabled commands */
 
 /* USB Networking options */

diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index 8624d24..ebfba72 100644 (file)
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -24,7 +24,6 @@
 
 /* USB */
 #ifdef CONFIG_USB_EHCI_MX6
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 56a1650..033f5b0 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -458,12 +458,6 @@
  */
 #define CONFIG_HAS_FSL_DR_USB
 
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-#endif
-
 #if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #endif

diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h
index 659f20e..c6c417b 100644 (file)
--- a/include/configs/pcl063.h
+++ b/include/configs/pcl063.h
@@ -46,7 +46,6 @@
 #define CONFIG_SYS_NAND_BASE           0x40000000
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1

diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h
index 0d099fa..4c1d24f 100644 (file)
--- a/include/configs/pcl063_ull.h
+++ b/include/configs/pcl063_ull.h
@@ -48,7 +48,6 @@
 #define CONFIG_SYS_NAND_BASE           0x40000000
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1

diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index ea30fbc..7e57d7b 100644 (file)
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -30,7 +30,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 5a6f224..39705d9 100644 (file)
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -116,7 +116,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM               2
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC                  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS                   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2

diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h
index f1886cb..e7a1279 100644 (file)
--- a/include/configs/somlabs_visionsom_6ull.h
+++ b/include/configs/somlabs_visionsom_6ull.h
@@ -65,7 +65,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index c355083..22a7407 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -41,7 +41,6 @@
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 3290ec0..d60fe51 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -53,8 +53,6 @@
 /* USB Configs */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
-
 
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 19c16df..0867cca 100644 (file)
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -75,7 +75,6 @@
 #define CONFIG_FEC_MXC_PHYADDR          7
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 

diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index a447ec8..487ab3d 100644 (file)
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -41,7 +41,6 @@
 /* Network */
 #define CONFIG_FEC_MXC_PHYADDR          0x0
 
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

diff --git a/include/configs/warp.h b/include/configs/warp.h
index 74fa03b..5716f8f 100644 (file)
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -34,7 +34,6 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Only OTG2 port enabled */

diff --git a/include/configs/xpress.h b/include/configs/xpress.h
index 8e36d1c..81f8d64 100644 (file)
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -31,7 +31,6 @@
 /* Environment is in stored in the eMMC boot partition */
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2