./test/py/test.py --bd ${TEST_PY_BD} ${TEST_PY_ID}
-k "${TEST_PY_TEST_SPEC:-not a_test_which_does_not_exist}"
--build-dir "$UBOOT_TRAVIS_BUILD_DIR";
+ ret=$?;
+ if [[ $ret -ne 0 ]]; then
+ exit $ret;
+ fi;
+ fi;
+ if [[ -n "${TEST_PY_TOOLS}" ]]; then
+ PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
+ PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
+ ./tools/binman/binman -t &&
+ ./tools/patman/patman --test &&
+ ./tools/buildman/buildman -t &&
+ PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
+ PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
+ ./tools/dtoc/dtoc -t;
fi
matrix:
TEST_PY_TEST_SPEC="test_ofplatdata"
BUILDMAN="^sandbox$"
TOOLCHAIN="x86_64"
+ TEST_PY_TOOLS="yes"
- env:
- TEST_PY_BD="sandbox_flattree"
BUILDMAN="^sandbox_flattree$"
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "ARM64 Linux kernel";
data = /incbin/("./arch/arm64/boot/Image.gz");
type = "kernel";
load = <0x80080000>;
entry = <0x80080000>;
};
- fdt@1 {
+ fdt-1 {
description = "Flattened Device Tree blob";
data = /incbin/("./fsl-ls1043ardb-static.dtb");
type = "flat_dt";
compression = "none";
load = <0x90000000>;
};
- ramdisk@1 {
+ ramdisk {
description = "LS1043 Ramdisk";
data = /incbin/("./rootfs.cpio.gz");
type = "ramdisk";
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
- fdt = "fdt@1";
- ramdisk = "ramdisk@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
+ ramdisk = "ramdisk";
loadables = "fdt", "ramdisk";
};
};
#define SEC_FIRMWARE_FIT_IMAGE "firmware"
#endif
#ifndef SEC_FIRMEWARE_FIT_CNF_NAME
-#define SEC_FIRMEWARE_FIT_CNF_NAME "config@1"
+#define SEC_FIRMEWARE_FIT_CNF_NAME "config-1"
#endif
#ifndef SEC_FIRMWARE_TARGET_EL
#define SEC_FIRMWARE_TARGET_EL 2
#address-cells = <1>;
images {
- uboot@1 {
+ uboot {
description = "U-Boot (64-bit)";
data = /incbin/("u-boot-nodtb.bin");
type = "standalone";
compression = "none";
load = <0x4a000000>;
};
- atf@1 {
+ atf {
description = "ARM Trusted Firmware";
data = /incbin/("$BL31");
type = "firmware";
for dtname in $*
do
cat << __FDT_IMAGE_EOF
- fdt@$cnt {
+ fdt_$cnt {
description = "$(basename $dtname .dtb)";
data = /incbin/("$dtname");
type = "flat_dt";
cat << __CONF_HEADER_EOF
};
configurations {
- default = "config@1";
+ default = "config_1";
__CONF_HEADER_EOF
for dtname in $*
do
cat << __CONF_SECTION_EOF
- config@$cnt {
+ config_$cnt {
description = "$(basename $dtname .dtb)";
- firmware = "uboot@1";
- loadables = "atf@1";
- fdt = "fdt@$cnt";
+ firmware = "uboot";
+ loadables = "atf";
+ fdt = "fdt_$cnt";
};
__CONF_SECTION_EOF
cnt=$((cnt+1))
/*
* Check subnode name, must be equal to "hash" or "signature".
* Multiple hash/signature nodes require unique unit node
- * names, e.g. hash@1, hash@2, signature@1, signature@2, etc.
+ * names, e.g. hash-1, hash-2, signature-1, signature-2, etc.
*/
name = fit_get_name(fit, noffset, NULL);
if (!strncmp(name, FIT_HASH_NODENAME, strlen(FIT_HASH_NODENAME))) {
/*
* Check subnode name, must be equal to "hash".
* Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, etc.
+ * names, e.g. hash-1, hash-2, etc.
*/
if (!strncmp(name, FIT_HASH_NODENAME,
strlen(FIT_HASH_NODENAME))) {
*
* / o image-tree
* |-o images
- * | |-o fdt@1
- * | |-o fdt@2
+ * | |-o fdt-1
+ * | |-o fdt-2
* |
* |-o configurations
- * |-o config@1
- * | |-fdt = fdt@1
+ * |-o config-1
+ * | |-fdt = fdt-1
* |
- * |-o config@2
- * |-fdt = fdt@2
+ * |-o config-2
+ * |-fdt = fdt-2
*
* / o U-Boot fdt
* |-compatible = "foo,bar", "bim,bam"
/*
* Each node can generate one region for each sub-node. Allow for
- * 7 sub-nodes (hash@1, signature@1, etc.) and some extra.
+ * 7 sub-nodes (hash-1, signature-1, etc.) and some extra.
*/
max_regions = 20 + count * 7;
struct fdt_region fdt_regions[max_regions];
#address-cells = <1>;
images {
- kernel@0 {
+ kernel {
description = "linux";
data = /incbin/("PATH/TO/YOUR/LINUX/DIR/arch/arm64/boot/Image.gz");
type = "kernel";
compression = "gzip";
load = <0x82080000>;
entry = <0x82080000>;
- hash@0 {
+ hash-1 {
algo = "sha256";
};
};
- fdt@0 {
+ fdt-1 {
description = "fdt";
data = /incbin/("PATH/TO/YOUR/LINUX/DIR/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dtb");
type = "flat_dt";
arch = "arm64";
compression = "none";
- hash@0 {
+ hash-1 {
algo = "sha256";
};
};
- ramdisk@0 {
+ ramdisk {
description = "ramdisk";
data = /incbin/("PATH/TO/YOUR/ROOTFS/DIR/rootfs.cpio");
type = "ramdisk";
arch = "arm64";
os = "linux";
compression = "none";
- hash@0 {
+ hash-1 {
algo = "sha256";
};
};
};
configurations {
- default = "config@0";
+ default = "config-1";
- config@0 {
+ config-1 {
description = "Configuration0";
- kernel = "kernel@0";
- fdt = "fdt@0";
- ramdisk = "ramdisk@0";
- signature@0 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ ramdisk = "ramdisk";
+ signature-1 {
algo = "sha256,rsa2048";
key-name-hint = "dev";
sign-images = "kernel", "fdt", "ramdisk";
---------------------------------------->8----------------------------------------
## Loading kernel from FIT Image at 84100000 ...
- Using 'config@0' configuration
+ Using 'config-1' configuration
Verifying Hash Integrity ... sha256,rsa2048:dev+ OK
- Trying 'kernel@0' kernel subimage
+ Trying 'kernel' kernel subimage
Description: linux
Created: 2017-10-20 14:32:29 UTC
Type: Kernel Image
Hash value: 82a37b7f11ae55f4e07aa25bf77e4067cb9dc1014d52d6cd4d588f92eee3aaad
Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 84100000 ...
- Using 'config@0' configuration
- Trying 'ramdisk@0' ramdisk subimage
+ Using 'config-1' configuration
+ Trying 'ramdisk' ramdisk subimage
Description: ramdisk
Created: 2017-10-20 14:32:29 UTC
Type: RAMDisk Image
Hash value: 44980a2874154a2e31ed59222c9f8ea968867637f35c81e4107a984de7014deb
Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 84100000 ...
- Using 'config@0' configuration
- Trying 'fdt@0' fdt subimage
+ Using 'config-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: fdt
Created: 2017-10-20 14:32:29 UTC
Type: Flat Device Tree
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "U-Boot mainline";
type = "kernel_noload";
arch = "arm";
compression = "none";
load = <0>;
entry = <0>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1{
+ fdt-1{
description = "rk3288-veryron-jerry.dtb";
data = /incbin/("../../b/chromebook_jerry/u-boot.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
- hash@1{
+ hash-1{
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot U-Boot";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "U-Boot mainline";
type = "kernel_noload";
arch = "arm";
compression = "none";
load = <0>;
entry = <0>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1{
+ fdt-1{
description = "tegra124-nyan-big.dtb";
data = /incbin/("../.././b/nyan-big/u-boot.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
- hash@1{
+ hash-1{
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot U-Boot";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("Image.lzo");
type = "kernel";
arch = "arm";
compression = "lzo";
load = <0x80008000>;
entry = <0x80008000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "beaglebone-black";
data = /incbin/("am335x-boneblack.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ signature-1 {
algo = "sha1,rsa2048";
key-name-hint = "dev";
sign-images = "fdt", "kernel";
FIT description: Beaglebone black
Created: Sun Jun 1 12:50:30 2014
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: unavailable
Created: Sun Jun 1 12:50:30 2014
Type: Kernel Image
Entry Point: 0x80008000
Hash algo: sha1
Hash value: c94364646427e10f423837e559898ef02c97b988
- Image 1 (fdt@1)
+ Image 1 (fdt-1)
Description: beaglebone-black
Created: Sun Jun 1 12:50:30 2014
Type: Flat Device Tree
Architecture: ARM
Hash algo: sha1
Hash value: cb09202f889d824f23b8e4404b781be5ad38a68d
- Default Configuration: 'conf@1'
- Configuration 0 (conf@1)
+ Default Configuration: 'conf-1'
+ Configuration 0 (conf-1)
Description: unavailable
- Kernel: kernel@1
- FDT: fdt@1
+ Kernel: kernel
+ FDT: fdt-1
Now am335x-boneblack-pubkey.dtb contains the public key and image.fit contains
Verifying Hash Integrity ... sha1,rsa2048:dev+
## Loading kernel from FIT Image at 7fc6ee469000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Verifying Hash Integrity ...
sha1,rsa2048:dev+
OK
- Trying 'kernel@1' kernel subimage
+ Trying 'kernel' kernel subimage
Description: unavailable
Created: Sun Jun 1 12:50:30 2014
Type: Kernel Image
Unimplemented compression type 4
## Loading fdt from FIT Image at 7fc6ee469000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: beaglebone-black
Created: Sun Jun 1 12:50:30 2014
Type: Flat Device Tree
Loading Flat Device Tree ... OK
## Loading ramdisk from FIT Image at 7fc6ee469000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Could not find subimage node
Signature check OK
But it is fun to do this by hand, so you can load image.fit into a hex editor
like ghex, and change a byte in the kernel:
- $UOUT/tools/fit_info -f image.fit -n /images/kernel@1 -p data
-NAME: kernel@1
+ $UOUT/tools/fit_info -f image.fit -n /images/kernel -p data
+NAME: kernel
LEN: 7790938
OFF: 168
Verifying Hash Integrity ... sha1,rsa2048:dev+
## Loading kernel from FIT Image at 7f5a39571000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Verifying Hash Integrity ...
sha1,rsa2048:dev+
OK
- Trying 'kernel@1' kernel subimage
+ Trying 'kernel' kernel subimage
Description: unavailable
Created: Sun Jun 1 13:09:21 2014
Type: Kernel Image
Hash value: c94364646427e10f423837e559898ef02c97b988
Verifying Hash Integrity ...
sha1 error
-Bad hash value for 'hash@1' hash node in 'kernel@1' image node
+Bad hash value for 'hash-1' hash node in 'kernel' image node
Bad Data Hash
## Loading fdt from FIT Image at 7f5a39571000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: beaglebone-black
Created: Sun Jun 1 13:09:21 2014
Type: Flat Device Tree
Loading Flat Device Tree ... OK
## Loading ramdisk from FIT Image at 7f5a39571000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Could not find subimage node
Signature check Bad (error 1)
configurations
fdtget -l image.fit /configurations
-conf@1
-fdtget -l image.fit /configurations/conf@1
-signature@1
+conf-1
+fdtget -l image.fit /configurations/conf-1
+signature-1
- fdtget -p image.fit /configurations/conf@1/signature@1
+ fdtget -p image.fit /configurations/conf-1/signature-1
hashed-strings
hashed-nodes
timestamp
key-name-hint
sign-images
- fdtget image.fit /configurations/conf@1/signature@1 hashed-nodes
-/ /configurations/conf@1 /images/fdt@1 /images/fdt@1/hash@1 /images/kernel@1 /images/kernel@1/hash@1
+ fdtget image.fit /configurations/conf-1/signature-1 hashed-nodes
+/ /configurations/conf-1 /images/fdt-1 /images/fdt-1/hash /images/kernel /images/kernel/hash-1
This gives us a bit of a look into the signature that mkimage added. Note you
can also use fdtdump to list the entire device tree.
Say we want to change the kernel that this configuration uses
-(/images/kernel@1). We could just put a new kernel in the image, but we will
+(/images/kernel). We could just put a new kernel in the image, but we will
need to change the hash to match. Let's simulate that by changing a byte of
the hash:
- fdtget -tx image.fit /images/kernel@1/hash@1 value
+ fdtget -tx image.fit /images/kernel/hash-1 value
c9436464 6427e10f 423837e5 59898ef0 2c97b988
- fdtput -tx image.fit /images/kernel@1/hash@1 value c9436464 6427e10f 423837e5 59898ef0 2c97b981
+ fdtput -tx image.fit /images/kernel/hash-1 value c9436464 6427e10f 423837e5 59898ef0 2c97b981
Now check it again:
configuration in any way. Try it with a fresh (valid) image if you like by
running the mkimage link again. Then:
- fdtput -p image.fit /configurations/conf@1/signature@2 value fred
+ fdtput -p image.fit /configurations/conf-1/signature-1 value fred
$UOUT/tools/fit_check_sign -f image.fit -k am335x-boneblack-pubkey.dtb
Verifying Hash Integrity ... -
sha1,rsa2048:devrsa_verify_with_keynode: RSA failed to verify: -13
7824930 bytes read in 589 ms (12.7 MiB/s)
U-Boot# bootm 82000000
## Loading kernel from FIT Image at 82000000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Verifying Hash Integrity ... sha1,rsa2048:dev+ OK
- Trying 'kernel@1' kernel subimage
+ Trying 'kernel' kernel subimage
Description: unavailable
Created: 2014-06-01 19:32:54 UTC
Type: Kernel Image
Hash value: c94364646427e10f423837e559898ef02c97b988
Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 82000000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: beaglebone-black
Created: 2014-06-01 19:32:54 UTC
Type: Flat Device Tree
Examples:
-- boot kernel "kernel@1" stored in a new uImage located at 200000:
-bootm 200000:kernel@1
+- boot kernel "kernel-1" stored in a new uImage located at 200000:
+bootm 200000:kernel-1
-- boot configuration "cfg@1" from a new uImage located at 200000:
-bootm 200000#cfg@1
+- boot configuration "cfg-1" from a new uImage located at 200000:
+bootm 200000#cfg-1
-- boot configuration "cfg@1" with extra "cfg@2" from a new uImage located
+- boot configuration "cfg-1" with extra "cfg-2" from a new uImage located
at 200000:
-bootm 200000#cfg@1#cfg@2
+bootm 200000#cfg-1#cfg-2
-- boot "kernel@1" from a new uImage at 200000 with initrd "ramdisk@2" found in
+- boot "kernel-1" from a new uImage at 200000 with initrd "ramdisk-2" found in
some other new uImage stored at address 800000:
-bootm 200000:kernel@1 800000:ramdisk@2
+bootm 200000:kernel-1 800000:ramdisk-2
-- boot "kernel@2" from a new uImage at 200000, with initrd "ramdisk@1" and FDT
- "fdt@1", both stored in some other new uImage located at 800000:
-bootm 200000:kernel@1 800000:ramdisk@1 800000:fdt@1
+- boot "kernel-2" from a new uImage at 200000, with initrd "ramdisk-1" and FDT
+ "fdt-1", both stored in some other new uImage located at 800000:
+bootm 200000:kernel-1 800000:ramdisk-1 800000:fdt-1
-- boot kernel "kernel@2" with initrd "ramdisk@2", both stored in a new uImage
+- boot kernel "kernel-2" with initrd "ramdisk-2", both stored in a new uImage
at address 200000, with a raw FDT blob stored at address 600000:
-bootm 200000:kernel@2 200000:ramdisk@2 600000
+bootm 200000:kernel-2 200000:ramdisk-2 600000
-- boot kernel "kernel@2" from new uImage at 200000 with FDT "fdt@1" from the
+- boot kernel "kernel-2" from new uImage at 200000 with FDT "fdt-1" from the
same new uImage:
-bootm 200000:kernel@2 - 200000:fdt@1
+bootm 200000:kernel-2 - 200000:fdt-1
Note on current image address
commands:
tftp 200000 /tftpboot/uImage
-bootm :kernel@1
+bootm :kernel-1
Last command is equivalent to:
-bootm 200000:kernel@1
+bootm 200000:kernel-1
tftp 200000 /tftpboot/uImage
-bootm 400000:kernel@1 :ramdisk@1
+bootm 400000:kernel-1 :ramdisk-1
Last command is equivalent to:
-bootm 400000:kernel@1 400000:ramdisk@1
+bootm 400000:kernel-1 400000:ramdisk-1
tftp 200000 /tftpboot/uImage
-bootm :kernel@1 400000:ramdisk@1 :fdt@1
+bootm :kernel-1 400000:ramdisk-1 :fdt-1
Last command is equivalent to:
-bootm 200000:kernel@1 400000:ramdisk@1 400000:fdt@1
+bootm 200000:kernel-1 400000:ramdisk-1 400000:fdt-1
$ mkimage -l kernel.itb
FIT description: Simple image with single Linux kernel
Created: Tue Mar 11 17:26:15 2008
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
Hash value: 2ae2bb40
Hash algo: sha1
Hash value: 3c200f34e2c226ddc789240cca0c59fc54a67cf4
- Default Configuration: 'config@1'
- Configuration 0 (config@1)
+ Default Configuration: 'config-1'
+ Configuration 0 (config-1)
Description: Boot Linux kernel
- Kernel: kernel@1
+ Kernel: kernel
The resulting image file kernel.itb can be now transferred to the target,
FIT image found
FIT description: Simple image with single Linux kernel
Created: 2008-03-11 16:26:15 UTC
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
Hash value: 2ae2bb40
Hash algo: sha1
Hash value: 3c200f34e2c226ddc789240cca0c59fc54a67cf4
- Default Configuration: 'config@1'
- Configuration 0 (config@1)
+ Default Configuration: 'config-1'
+ Configuration 0 (config-1)
Description: Boot Linux kernel
- Kernel: kernel@1
+ Kernel: kernel
=> bootm
## Booting kernel from FIT Image at 00900000 ...
- Using 'config@1' configuration
- Trying 'kernel@1' kernel subimage
+ Using 'config-1' configuration
+ Trying 'kernel' kernel subimage
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
$ mkimage -l kernel_fdt.itb
FIT description: Simple image with single Linux kernel and FDT blob
Created: Tue Mar 11 16:29:22 2008
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
Hash value: 2c0cc807
Hash algo: sha1
Hash value: 264b59935470e42c418744f83935d44cdf59a3bb
- Image 1 (fdt@1)
+ Image 1 (fdt-1)
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Hash value: 0d655d71
Hash algo: sha1
Hash value: 25ab4e15cd4b8a5144610394560d9c318ce52def
- Default Configuration: 'conf@1'
- Configuration 0 (conf@1)
+ Default Configuration: 'conf-1'
+ Configuration 0 (conf-1)
Description: Boot Linux kernel with FDT blob
- Kernel: kernel@1
- FDT: fdt@1
+ Kernel: kernel
+ FDT: fdt-1
The resulting image file kernel_fdt.itb can be now transferred to the target,
FIT image found
FIT description: Simple image with single Linux kernel and FDT blob
Created: 2008-03-11 15:29:22 UTC
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
Hash value: 2c0cc807
Hash algo: sha1
Hash value: 264b59935470e42c418744f83935d44cdf59a3bb
- Image 1 (fdt@1)
+ Image 1 (fdt-1)
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Hash value: 0d655d71
Hash algo: sha1
Hash value: 25ab4e15cd4b8a5144610394560d9c318ce52def
- Default Configuration: 'conf@1'
- Configuration 0 (conf@1)
+ Default Configuration: 'conf-1'
+ Configuration 0 (conf-1)
Description: Boot Linux kernel with FDT blob
- Kernel: kernel@1
- FDT: fdt@1
+ Kernel: kernel
+ FDT: fdt-1
=> bootm
## Booting kernel from FIT Image at 00900000 ...
- Using 'conf@1' configuration
- Trying 'kernel@1' kernel subimage
+ Using 'conf-1' configuration
+ Trying 'kernel' kernel subimage
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
Verifying Hash Integrity ... crc32+ sha1+ OK
Uncompressing Kernel Image ... OK
## Flattened Device Tree from FIT Image at 00900000
- Using 'conf@1' configuration
- Trying 'fdt@1' FDT blob subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' FDT blob subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
+ kernel = "kernel";
};
};
};
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./image.bin.lzo");
type = "kernel";
compression = "lzo";
load = <0x01000000>;
entry = <0x00000000>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- setup@1 {
+ setup {
description = "Linux setup.bin";
data = /incbin/("./setup.bin");
type = "x86_setup";
compression = "none";
load = <0x00090000>;
entry = <0x00090000>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
- setup = "setup@1";
+ kernel = "kernel";
+ setup = "setup";
};
};
};
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "Flattened Device Tree blob";
data = /incbin/("./target.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
+ default = "conf-1";
+ conf-1 {
description = "Boot Linux kernel with FDT blob";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
#address-cells = <1>;
images {
- fdt@1 {
+ fdt-1 {
description = "zc706";
data = /incbin/("/tftpboot/devicetree.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0x10000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fpga@1 {
+ fpga {
description = "FPGA";
data = /incbin/("/tftpboot/download.bit");
type = "fpga";
arch = "arm";
compression = "none";
load = <0x30000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- linux_kernel@1 {
+ linux_kernel {
description = "Linux";
data = /incbin/("/tftpboot/zImage");
type = "kernel";
compression = "none";
load = <0x8000>;
entry = <0x8000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
};
configurations {
- default = "config@2";
- config@1 {
+ default = "config-2";
+ config-1 {
description = "Linux";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "Linux with fpga";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
- fpga = "fpga@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
+ fpga = "fpga";
};
};
};
#address-cells = <1>;
images {
- xen_kernel@1 {
+ xen_kernel {
description = "xen binary";
data = /incbin/("./xen");
type = "kernel";
compression = "none";
load = <0xa0000000>;
entry = <0xa0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fdt@1 {
+ fdt-1 {
description = "xexpress-ca15 tree blob";
data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0xb0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fdt@2 {
+ fdt-2 {
description = "xexpress-ca15 tree blob";
data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0xb0400000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- linux_kernel@1 {
+ linux_kernel {
description = "Linux Image";
data = /incbin/("./Image");
type = "kernel";
compression = "none";
load = <0xa0000000>;
entry = <0xa0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
};
configurations {
- default = "config@2";
+ default = "config-2";
- config@1 {
+ config-1 {
description = "Just plain Linux";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "Xen one loadable";
- kernel = "xen_kernel@1";
- fdt = "fdt@1";
- loadables = "linux_kernel@1";
+ kernel = "xen_kernel";
+ fdt = "fdt-1";
+ loadables = "linux_kernel";
};
- config@3 {
+ config-3 {
description = "Xen two loadables";
- kernel = "xen_kernel@1";
- fdt = "fdt@1";
- loadables = "linux_kernel@1", "fdt@2";
+ kernel = "xen_kernel";
+ fdt = "fdt-1";
+ loadables = "linux_kernel", "fdt-2";
};
};
};
#address-cells = <1>;
images {
- kernel@1 {
+ kernel-1 {
description = "vanilla-2.6.23";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- kernel@2 {
+ kernel-2 {
description = "2.6.23-denx";
data = /incbin/("./2.6.23-denx.bin.gz");
type = "kernel";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- kernel@3 {
+ kernel-3 {
description = "2.4.25-denx";
data = /incbin/("./2.4.25-denx.bin.gz");
type = "kernel";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- ramdisk@1 {
+ ramdisk-1 {
description = "eldk-4.2-ramdisk";
data = /incbin/("./eldk-4.2-ramdisk");
type = "ramdisk";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- ramdisk@2 {
+ ramdisk-2 {
description = "eldk-3.1-ramdisk";
data = /incbin/("./eldk-3.1-ramdisk");
type = "ramdisk";
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
};
- fdt@1 {
+ fdt-1 {
description = "tqm5200-fdt";
data = /incbin/("./tqm5200.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "crc32";
};
};
- fdt@2 {
+ fdt-2 {
description = "tqm5200s-fdt";
data = /incbin/("./tqm5200s.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
load = <00700000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
+ default = "config-1";
- config@1 {
+ config-1 {
description = "tqm5200 vanilla-2.6.23 configuration";
- kernel = "kernel@1";
- ramdisk = "ramdisk@1";
- fdt = "fdt@1";
+ kernel = "kernel-1";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "tqm5200s denx-2.6.23 configuration";
- kernel = "kernel@2";
- ramdisk = "ramdisk@1";
- fdt = "fdt@2";
+ kernel = "kernel-2";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-2";
};
- config@3 {
+ config-3 {
description = "tqm5200s denx-2.4.25 configuration";
- kernel = "kernel@3";
- ramdisk = "ramdisk@2";
+ kernel = "kernel-3";
+ ramdisk = "ramdisk-2";
};
};
};
load = <0x40000>;
};
- fdt@1 {
+ fdt-1 {
description = "Pine64+ DT";
type = "flat_dt";
compression = "none";
arch = "arm64";
};
- fdt@2 {
+ fdt-2 {
description = "Pine64 DT";
type = "flat_dt";
compression = "none";
};
configurations {
- default = "config@1";
+ default = "config-1";
- config@1 {
+ config-1 {
description = "sun50i-a64-pine64-plus";
loadables = "uboot", "atf", "kernel", "initrd";
- fdt = "fdt@1";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "sun50i-a64-pine64";
loadables = "uboot", "atf", "mgmt-firmware";
- fdt = "fdt@2";
+ fdt = "fdt-2";
};
};
};
/dts-v1/;
/ {
images {
- kernel@1 {
+ kernel {
data = /incbin/("./zImage");
type = "kernel";
arch = "arm";
load = <0x82000000>;
entry = <0x82000000>;
};
- fdt@1 {
+ fdt-1 {
data = /incbin/("./foo-reva.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@2 {
+ fdt-2 {
data = /incbin/("./foo-revb.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@3 {
+ fdt-3 {
data = /incbin/("./foo-reva-bar.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@4 {
+ fdt-4 {
data = /incbin/("./foo-revb-bar.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@5 {
+ fdt-5 {
data = /incbin/("./foo-revb-baz.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@6 {
+ fdt-6 {
data = /incbin/("./foo-revb-bar-baz.dtb");
type = "flat_dt";
arch = "arm";
configurations {
default = "foo-reva.dtb;
foo-reva.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
foo-revb.dtb {
- kernel = "kernel@1";
- fdt = "fdt@2";
+ kernel = "kernel";
+ fdt = "fdt-2";
};
foo-reva-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@3";
+ kernel = "kernel";
+ fdt = "fdt-3";
};
foo-revb-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@4";
+ kernel = "kernel";
+ fdt = "fdt-4";
};
foo-revb-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@5";
+ kernel = "kernel";
+ fdt = "fdt-5";
};
foo-revb-bar-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@6";
+ kernel = "kernel";
+ fdt = "fdt-6";
};
};
};
/dts-v1/;
/ {
images {
- kernel@1 {
+ kernel {
data = /incbin/("./zImage");
type = "kernel";
arch = "arm";
load = <0x82000000>;
entry = <0x82000000>;
};
- fdt@1 {
+ fdt-1 {
data = /incbin/("./foo.dtb");
type = "flat_dt";
arch = "arm";
load = <0x87f00000>;
};
- fdt@2 {
+ fdt-2 {
data = /incbin/("./reva.dtbo");
type = "flat_dt";
arch = "arm";
load = <0x87fc0000>;
};
- fdt@3 {
+ fdt-3 {
data = /incbin/("./revb.dtbo");
type = "flat_dt";
arch = "arm";
load = <0x87fc0000>;
};
- fdt@4 {
+ fdt-4 {
data = /incbin/("./bar.dtbo");
type = "flat_dt";
arch = "arm";
load = <0x87fc0000>;
};
- fdt@5 {
+ fdt-5 {
data = /incbin/("./baz.dtbo");
type = "flat_dt";
arch = "arm";
configurations {
default = "foo-reva.dtb;
foo-reva.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@2";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-2";
};
foo-revb.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3";
};
foo-reva-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@2", "fdt@4";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-2", "fdt-4";
};
foo-revb-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3", "fdt@4";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3", "fdt-4";
};
foo-revb-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3", "fdt@5";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3", "fdt-5";
};
foo-revb-bar-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3", "fdt@4", "fdt@5";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3", "fdt-4", "fdt-5";
};
bar {
- fdt = "fdt@4";
+ fdt = "fdt-4";
};
baz {
- fdt = "fdt@5";
+ fdt = "fdt-5";
};
};
};
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("test-kernel.bin");
type = "kernel_noload";
arch = "sandbox";
load = <0x4>;
entry = <0x8>;
kernel-version = <1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "snow";
data = /incbin/("sandbox-kernel.dtb");
type = "flat_dt";
arch = "sandbox";
compression = "none";
fdt-version = <1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
sign-images = "fdt", "kernel";
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("test-kernel.bin");
type = "kernel_noload";
arch = "sandbox";
load = <0x4>;
entry = <0x8>;
kernel-version = <1>;
- signature@1 {
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
};
};
- fdt@1 {
+ fdt-1 {
description = "snow";
data = /incbin/("sandbox-kernel.dtb");
type = "flat_dt";
arch = "sandbox";
compression = "none";
fdt-version = <1>;
- signature@1 {
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
The following properties are required in the FIT's signature node(s) to
allow the signer to operate. These should be added to the .its file.
Signature nodes sit at the same level as hash nodes and are called
-signature@1, signature@2, etc.
+signature-1, signature-2, etc.
- algo: Algorithm name (e.g. "sha1,rsa2048")
- hashed-nodes: A list of nodes which were hashed by the signer. Each is
a string - the full path to node. A typical value might be:
- hashed-nodes = "/", "/configurations/conf@1", "/images/kernel@1",
- "/images/kernel@1/hash@1", "/images/fdt@1",
- "/images/fdt@1/hash@1";
+ hashed-nodes = "/", "/configurations/conf-1", "/images/kernel",
+ "/images/kernel/hash-1", "/images/fdt-1",
+ "/images/fdt-1/hash-1";
- hashed-strings: The start and size of the string region of the FIT that
was hashed
/ {
images {
- kernel@1 {
+ kernel-1 {
data = <data for kernel1>
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
value = <...kernel signature 1...>
};
};
- kernel@2 {
+ kernel-2 {
data = <data for kernel2>
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
value = <...kernel signature 2...>
};
};
- fdt@1 {
+ fdt-1 {
data = <data for fdt1>;
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
vaue = <...fdt signature 1...>
};
};
- fdt@2 {
+ fdt-2 {
data = <data for fdt2>;
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
vaue = <...fdt signature 2...>
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel-1";
+ fdt = "fdt-1";
};
- conf@1 {
- kernel = "kernel@2";
- fdt = "fdt@2";
+ conf-1 {
+ kernel = "kernel-2";
+ fdt = "fdt-2";
};
};
};
configuration 3 with kernel 1 and fdt 2:
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel-1";
+ fdt = "fdt-1";
};
- conf@1 {
- kernel = "kernel@2";
- fdt = "fdt@2";
+ conf-1 {
+ kernel = "kernel-2";
+ fdt = "fdt-2";
};
- conf@3 {
- kernel = "kernel@1";
- fdt = "fdt@2";
+ conf-3 {
+ kernel = "kernel-1";
+ fdt = "fdt-2";
};
};
/ {
images {
- kernel@1 {
+ kernel-1 {
data = <data for kernel1>
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...kernel hash 1...>
};
};
- kernel@2 {
+ kernel-2 {
data = <data for kernel2>
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...kernel hash 2...>
};
};
- fdt@1 {
+ fdt-1 {
data = <data for fdt1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...fdt hash 1...>
};
};
- fdt@2 {
+ fdt-2 {
data = <data for fdt2>;
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...fdt hash 2...>
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel-1";
+ fdt = "fdt-1";
+ signature-1 {
algo = "sha1,rsa2048";
value = <...conf 1 signature...>;
};
};
- conf@2 {
- kernel = "kernel@2";
- fdt = "fdt@2";
- signature@1 {
+ conf-2 {
+ kernel = "kernel-2";
+ fdt = "fdt-2";
+ signature-1 {
algo = "sha1,rsa2048";
value = <...conf 1 signature...>;
};
You can see that we have added hashes for all images (since they are no
longer signed), and a signature to each configuration. In the above example,
-mkimage will sign configurations/conf@1, the kernel and fdt that are
-pointed to by the configuration (/images/kernel@1, /images/kernel@1/hash@1,
-/images/fdt@1, /images/fdt@1/hash@1) and the root structure of the image
+mkimage will sign configurations/conf-1, the kernel and fdt that are
+pointed to by the configuration (/images/kernel-1, /images/kernel-1/hash-1,
+/images/fdt-1, /images/fdt-1/hash-1) and the root structure of the image
(so that it isn't possible to add or remove root nodes). The signature is
-written into /configurations/conf@1/signature@1/value. It can easily be
+written into /configurations/conf-1/signature-1/value. It can easily be
verified later even if the FIT has been signed with other keys in the
meantime.
|
o images
| |
- | o image@1 {...}
- | o image@2 {...}
+ | o image-1 {...}
+ | o image-2 {...}
| ...
|
o configurations
- |- default = "conf@1"
+ |- default = "conf-1"
|
- o conf@1 {...}
- o conf@2 {...}
+ o conf-1 {...}
+ o conf-2 {...}
...
This node is a container node for component sub-image nodes. Each sub-node of
the '/images' node should have the following layout:
- o image@1
+ o image-1
|- description = "component sub-image description"
|- data = /incbin/("path/to/data/file.bin")
|- type = "sub-image type name"
|- load = <00000000>
|- entry = <00000000>
|
- o hash@1 {...}
- o hash@2 {...}
+ o hash-1 {...}
+ o hash-2 {...}
...
Mandatory properties:
property of the root node. Mandatory for types: "standalone" and "kernel".
Optional nodes:
- - hash@1 : Each hash sub-node represents separate hash or checksum
+ - hash-1 : Each hash sub-node represents separate hash or checksum
calculated for node's data according to specified algorithm.
5) Hash nodes
-------------
-o hash@1
+o hash-1
|- algo = "hash or checksum algorithm name"
|- value = [hash or checksum value]
o configurations
|- default = "default configuration sub-node unit name"
|
- o config@1 {...}
- o config@2 {...}
+ o config-1 {...}
+ o config-2 {...}
...
Each configuration has the following structure:
-o config@1
+o config-1
|- description = "configuration description"
|- kernel = "kernel sub-node unit name"
|- ramdisk = "ramdisk sub-node unit name"
#address-cells = <1>;
images {
- update@1 {
+ update-1 {
description = "Linux kernel binary";
data = /incbin/("./vmlinux.bin.gz");
compression = "none";
type = "firmware";
load = <FF700000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- update@2 {
+ update-2 {
description = "Ramdisk image";
data = /incbin/("./ramdisk_image.gz");
compression = "none";
type = "firmware";
load = <FF8E0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- update@3 {
+ update-3 {
description = "FDT blob";
data = /incbin/("./blob.fdt");
compression = "none";
type = "firmware";
load = <FFAC0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
#address-cells = <1>;
images {
- update@1 {
+ update-1 {
description = "U-Boot binary";
data = /incbin/("./u-boot.bin");
compression = "none";
type = "firmware";
load = <FFFC0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
$ dumpimage -l image.fit
FIT description: Simple image with single Linux kernel on x86
Created: Tue Oct 7 10:57:24 2014
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Created: Tue Oct 7 10:57:24 2014
Type: Kernel Image
Entry Point: 0x00000000
Hash algo: sha1
Hash value: 446b5163ebfe0fb6ee20cbb7a8501b263cd92392
- Image 1 (setup@1)
+ Image 1 (setup)
Description: Linux setup.bin
Created: Tue Oct 7 10:57:24 2014
Type: x86 setup.bin
Data Size: 12912 Bytes = 12.61 kB = 0.01 MB
Hash algo: sha1
Hash value: a1f2099cf47ff9816236cd534c77af86e713faad
- Default Configuration: 'config@1'
- Configuration 0 (config@1)
+ Default Configuration: 'config-1'
+ Configuration 0 (config-1)
Description: Boot Linux kernel
- Kernel: kernel@1
+ Kernel: kernel
Booting the FIT
* boot_get_loadable() will take the given FIT configuration, and look
* for a field named "loadables". Loadables, is a list of elements in
* the FIT given as strings. exe:
- * loadables = "linux_kernel@1", "fdt@2";
+ * loadables = "linux_kernel", "fdt-2";
* this function will attempt to parse each string, and load the
* corresponding element from the FIT into memory. Once placed,
* no aditional actions are taken.
* @param images Boot images structure
* @param addr Address of FIT in memory
* @param fit_unamep On entry this is the requested image name
- * (e.g. "kernel@1") or NULL to use the default. On exit
+ * (e.g. "kernel") or NULL to use the default. On exit
* points to the selected image name
* @param fit_uname_configp On entry this is the requested configuration
- * name (e.g. "conf@1") or NULL to use the default. On
+ * name (e.g. "conf-1") or NULL to use the default. On
* exit points to the selected configuration name.
* @param arch Expected architecture (IH_ARCH_...)
* @param datap Returns address of loaded image
* @param images Boot images structure
* @param addr Address of FIT in memory
* @param fit_unamep On entry this is the requested image name
- * (e.g. "kernel@1") or NULL to use the default. On exit
+ * (e.g. "kernel") or NULL to use the default. On exit
* points to the selected image name
* @param fit_uname_configp On entry this is the requested configuration
- * name (e.g. "conf@1") or NULL to use the default. On
+ * name (e.g. "conf-1") or NULL to use the default. On
* exit points to the selected configuration name.
* @param arch Expected architecture (IH_ARCH_...)
* @param image_type Required image type (IH_TYPE_...). If this is
/**
* fit_get_node_from_config() - Look up an image a FIT by type
*
- * This looks in the selected conf@ node (images->fit_uname_cfg) for a
+ * This looks in the selected conf- node (images->fit_uname_cfg) for a
* particular image type (e.g. "kernel") and then finds the image that is
* referred to.
*
* For example, for something like:
*
* images {
- * kernel@1 {
+ * kernel {
* ...
* };
* };
* configurations {
- * conf@1 {
- * kernel = "kernel@1";
+ * conf-1 {
+ * kernel = "kernel";
* };
* };
*
* the function will return the node offset of the kernel@1 node, assuming
- * that conf@1 is the chosen configuration.
+ * that conf-1 is the chosen configuration.
*
* @param images Boot images structure
* @param prop_name Property name to look up (FIT_..._PROP)
* @noffset: Offset of conf@xxx node to check
* @prop_name: Property to read from the conf node
*
- * The conf@ nodes contain references to other nodes, using properties
- * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
+ * The conf- nodes contain references to other nodes, using properties
+ * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"),
* return the offset of the node referred to (e.g. offset of node
- * "/images/kernel@1".
+ * "/images/kernel".
*/
int fit_conf_get_prop_node(const void *fit, int noffset,
const char *prop_name);
# Run tests for the flat DT version of sandbox
./test/py/test.py --bd sandbox_flattree --build
+DTC_DIR=build-sandbox_spl/scripts/dtc
+
+PYTHONPATH=${DTC_DIR}/pylibfdt DTC=${DTC_DIR}/dtc run_test \
+ ./tools/binman/binman -t
+run_test ./tools/patman/patman --test
+run_test ./tools/buildman/buildman -t
+PYTHONPATH=${DTC_DIR}/pylibfdt DTC=${DTC_DIR}/dtc run_test ./tools/dtoc/dtoc -t
+
+# This needs you to set up Python test coverage tools.
+# To enable Python test coverage on Debian-type distributions (e.g. Ubuntu):
+# $ sudo apt-get install python-pip python-pytest
+# $ sudo pip install coverage
+PYTHONPATH=${DTC_DIR}/pylibfdt DTC=${DTC_DIR}/dtc run_test \
+ ./tools/binman/binman -T
+
if [ $result == 0 ]; then
echo "Tests passed!"
else
Most of the time such essoteric behaviour is not needed, but it can be
essential for complex images.
+If you need to specify a particular device-tree compiler to use, you can define
+the DTC environment variable. This can be useful when the system dtc is too
+old.
+
History / Credits
-----------------
'-W', 'no-unit_address_vs_reg']
args.extend(search_list)
args.append(dts_input)
- command.Run('dtc', *args)
+ dtc = os.environ.get('DTC') or 'dtc'
+ command.Run(dtc, *args)
return dtb_output
def GetInt(node, propname, default=None):
* fit_write_images() - Write out a list of images to the FIT
*
* We always include the main image (params->datafile). If there are device
- * tree files, we include an fdt@ node for each of those too.
+ * tree files, we include an fdt- node for each of those too.
*/
static int fit_write_images(struct image_tool_params *params, char *fdt)
{
/* First the main image */
typename = genimg_get_type_short_name(params->fit_image_type);
- snprintf(str, sizeof(str), "%s@1", typename);
+ snprintf(str, sizeof(str), "%s-1", typename);
fdt_begin_node(fdt, str);
fdt_property_string(fdt, "description", params->imagename);
fdt_property_string(fdt, "type", typename);
for (cont = params->content_head; cont; cont = cont->next) {
if (cont->type != IH_TYPE_FLATDT)
continue;
- snprintf(str, sizeof(str), "%s@%d", FIT_FDT_PROP, ++upto);
+ snprintf(str, sizeof(str), "%s-%d", FIT_FDT_PROP, ++upto);
fdt_begin_node(fdt, str);
get_basename(str, sizeof(str), cont->fname);
/* And a ramdisk file if available */
if (params->fit_ramdisk) {
- fdt_begin_node(fdt, FIT_RAMDISK_PROP "@1");
+ fdt_begin_node(fdt, FIT_RAMDISK_PROP "-1");
fdt_property_string(fdt, "type", FIT_RAMDISK_PROP);
fdt_property_string(fdt, "os", genimg_get_os_short_name(params->os));
int upto;
fdt_begin_node(fdt, "configurations");
- fdt_property_string(fdt, "default", "conf@1");
+ fdt_property_string(fdt, "default", "conf-1");
upto = 0;
for (cont = params->content_head; cont; cont = cont->next) {
if (cont->type != IH_TYPE_FLATDT)
continue;
typename = genimg_get_type_short_name(cont->type);
- snprintf(str, sizeof(str), "conf@%d", ++upto);
+ snprintf(str, sizeof(str), "conf-%d", ++upto);
fdt_begin_node(fdt, str);
get_basename(str, sizeof(str), cont->fname);
fdt_property_string(fdt, "description", str);
typename = genimg_get_type_short_name(params->fit_image_type);
- snprintf(str, sizeof(str), "%s@1", typename);
+ snprintf(str, sizeof(str), "%s-1", typename);
fdt_property_string(fdt, typename, str);
if (params->fit_ramdisk)
fdt_property_string(fdt, FIT_RAMDISK_PROP,
- FIT_RAMDISK_PROP "@1");
+ FIT_RAMDISK_PROP "-1");
- snprintf(str, sizeof(str), FIT_FDT_PROP "@%d", upto);
+ snprintf(str, sizeof(str), FIT_FDT_PROP "-%d", upto);
fdt_property_string(fdt, FIT_FDT_PROP, str);
fdt_end_node(fdt);
}
if (!upto) {
- fdt_begin_node(fdt, "conf@1");
+ fdt_begin_node(fdt, "conf-1");
typename = genimg_get_type_short_name(params->fit_image_type);
- snprintf(str, sizeof(str), "%s@1", typename);
+ snprintf(str, sizeof(str), "%s-1", typename);
fdt_property_string(fdt, typename, str);
if (params->fit_ramdisk)
fdt_property_string(fdt, FIT_RAMDISK_PROP,
- FIT_RAMDISK_PROP "@1");
+ FIT_RAMDISK_PROP "-1");
fdt_end_node(fdt);
}
*
* Input component image node structure:
*
- * o image@1 (at image_noffset)
+ * o image-1 (at image_noffset)
* | - data = [binary data]
- * o hash@1
+ * o hash-1
* |- algo = "sha1"
*
* Output component image node structure:
*
- * o image@1 (at image_noffset)
+ * o image-1 (at image_noffset)
* | - data = [binary data]
- * o hash@1
+ * o hash-1
* |- algo = "sha1"
* |- value = sha1(data)
*
/*
* Check subnode name, must be equal to "hash" or "signature".
* Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, signature@1, etc.
+ * names, e.g. hash-1, hash-2, signature-1, etc.
*/
node_name = fit_get_name(fit, noffset, NULL);
if (!strncmp(node_name, FIT_HASH_NODENAME,
projects / platform / kernel / u-boot.git / commitdiff