Enables an 'i2c edid' command which can read EDID
information over I2C from an attached LCD display.
-- Splash Screen Support: CONFIG_SPLASH_SCREEN
-
- If this option is set, the environment is checked for
- a variable "splashimage". If found, the usual display
- of logo, copyright and system information on the LCD
- is suppressed and the BMP image at the address
- specified in "splashimage" is loaded instead. The
- console is redirected to the "nulldev", too. This
- allows for a "silent" boot where a splash screen is
- loaded very quickly after power-on.
-
- CONFIG_SPLASHIMAGE_GUARD
-
- If this option is set, then U-Boot will prevent the environment
- variable "splashimage" from being set to a problematic address
- (see doc/README.displaying-bmps).
- This option is useful for targets where, due to alignment
- restrictions, an improperly aligned BMP image will cause a data
- abort. If you think you will not have problems with unaligned
- accesses (for example because your toolchain prevents them)
- there is no need to set this option.
-
- CONFIG_SPLASH_SCREEN_ALIGN
-
- If this option is set the splash image can be freely positioned
- on the screen. Environment variable "splashpos" specifies the
- position as "x,y". If a positive number is given it is used as
- number of pixel from left/top. If a negative number is given it
- is used as number of pixel from right/bottom. You can also
- specify 'm' for centering the image.
-
- Example:
- setenv splashpos m,m
- => image at center of screen
-
- setenv splashpos 30,20
- => image at x = 30 and y = 20
-
- setenv splashpos -10,m
- => vertically centered image
- at x = dspWidth - bmpWidth - 9
-
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
If this option is set, additionally to standard BMP
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
#endif /* CONFIG_CMD_NET */
removed (for example a USB keyboard) then this option can be
enabled to ensure this is handled correctly.
+config SPL_SYS_STDIO_DEREGISTER
+ bool "Allow deregistering stdio devices in SPL"
+ help
+ Generally there is no need to deregister stdio devices since they
+ are never deactivated. But if a stdio device is used which can be
+ removed (for example a USB keyboard) then this option can be
+ enabled to ensure this is handled correctly. This is very rarely
+ needed in SPL.
+
+config SYS_DEVICE_NULLDEV
+ bool "Enable a null device for stdio"
+ default y if SPLASH_SCREEN || SYS_STDIO_DEREGISTER
+ help
+ Enable creation of a "nulldev" stdio device. This allows silent
+ operation of the console by setting stdout to "nulldev". Enable
+ this to use a serial console under board control.
+
endmenu
menu "Logging"
#include <stdio_dev.h>
#include <serial.h>
#include <splash.h>
-
-#if defined(CONFIG_SYS_I2C)
#include <i2c.h>
-#endif
#include <dm/device-internal.h>
struct stdio_dev *stdio_devices[] = { NULL, NULL, NULL };
char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
-#if defined(CONFIG_SPLASH_SCREEN) && !defined(CONFIG_SYS_DEVICE_NULLDEV)
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-#endif
-
-#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-#endif
-
-#ifdef CONFIG_SYS_DEVICE_NULLDEV
static void nulldev_putc(struct stdio_dev *dev, const char c)
{
/* nulldev is empty! */
/* nulldev is empty! */
return 0;
}
-#endif
static void stdio_serial_putc(struct stdio_dev *dev, const char c)
{
dev.tstc = stdio_serial_tstc;
stdio_register (&dev);
-#ifdef CONFIG_SYS_DEVICE_NULLDEV
- memset (&dev, 0, sizeof (dev));
+ if (CONFIG_IS_ENABLED(SYS_DEVICE_NULLDEV)) {
+ memset(&dev, '\0', sizeof(dev));
- strcpy (dev.name, "nulldev");
- dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
- dev.putc = nulldev_putc;
- dev.puts = nulldev_puts;
- dev.getc = nulldev_input;
- dev.tstc = nulldev_input;
+ strcpy(dev.name, "nulldev");
+ dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
+ dev.putc = nulldev_putc;
+ dev.puts = nulldev_puts;
+ dev.getc = nulldev_input;
+ dev.tstc = nulldev_input;
- stdio_register (&dev);
-#endif
+ stdio_register(&dev);
+ }
}
/**************************************************************************
*/
struct list_head* stdio_get_list(void)
{
- return &(devs.list);
+ return &devs.list;
}
-#ifdef CONFIG_DM_VIDEO
/**
* stdio_probe_device() - Find a device which provides the given stdio device
*
return 0;
}
-#endif
struct stdio_dev *stdio_get_by_name(const char *name)
{
if (!name)
return NULL;
- list_for_each(pos, &(devs.list)) {
+ list_for_each(pos, &devs.list) {
sdev = list_entry(pos, struct stdio_dev, list);
if (strcmp(sdev->name, name) == 0)
return sdev;
}
-#ifdef CONFIG_DM_VIDEO
- /*
- * We did not find a suitable stdio device. If there is a video
- * driver with a name starting with 'vidconsole', we can try probing
- * that in the hope that it will produce the required stdio device.
- *
- * This function is sometimes called with the entire value of
- * 'stdout', which may include a list of devices separate by commas.
- * Obviously this is not going to work, so we ignore that case. The
- * call path in that case is console_init_r() -> search_device() ->
- * stdio_get_by_name().
- */
- if (!strncmp(name, "vidconsole", 10) && !strchr(name, ',') &&
- !stdio_probe_device(name, UCLASS_VIDEO, &sdev))
- return sdev;
-#endif
+ if (IS_ENABLED(CONFIG_DM_VIDEO)) {
+ /*
+ * We did not find a suitable stdio device. If there is a video
+ * driver with a name starting with 'vidconsole', we can try
+ * probing that in the hope that it will produce the required
+ * stdio device.
+ *
+ * This function is sometimes called with the entire value of
+ * 'stdout', which may include a list of devices separate by
+ * commas. Obviously this is not going to work, so we ignore
+ * that case. The call path in that case is
+ * console_init_r() -> search_device() -> stdio_get_by_name()
+ */
+ if (!strncmp(name, "vidconsole", 10) && !strchr(name, ',') &&
+ !stdio_probe_device(name, UCLASS_VIDEO, &sdev))
+ return sdev;
+ }
return NULL;
}
-struct stdio_dev* stdio_clone(struct stdio_dev *dev)
+struct stdio_dev *stdio_clone(struct stdio_dev *dev)
{
struct stdio_dev *_dev;
- if(!dev)
+ if (!dev)
return NULL;
_dev = calloc(1, sizeof(struct stdio_dev));
-
- if(!_dev)
+ if (!_dev)
return NULL;
memcpy(_dev, dev, sizeof(struct stdio_dev));
struct stdio_dev *_dev;
_dev = stdio_clone(dev);
- if(!_dev)
+ if (!_dev)
return -ENODEV;
- list_add_tail(&(_dev->list), &(devs.list));
+ list_add_tail(&_dev->list, &devs.list);
if (devp)
*devp = _dev;
return stdio_register_dev(dev, NULL);
}
-/* deregister the device "devname".
- * returns 0 if success, -1 if device is assigned and 1 if devname not found
- */
-#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
int stdio_deregister_dev(struct stdio_dev *dev, int force)
{
- int l;
struct list_head *pos;
char temp_names[3][16];
+ int i;
/* get stdio devices (ListRemoveItem changes the dev list) */
- for (l=0 ; l< MAX_FILES; l++) {
- if (stdio_devices[l] == dev) {
+ for (i = 0 ; i < MAX_FILES; i++) {
+ if (stdio_devices[i] == dev) {
if (force) {
- strcpy(temp_names[l], "nulldev");
+ strcpy(temp_names[i], "nulldev");
continue;
}
/* Device is assigned -> report error */
- return -1;
+ return -EBUSY;
}
- memcpy (&temp_names[l][0],
- stdio_devices[l]->name,
- sizeof(temp_names[l]));
+ memcpy(&temp_names[i][0], stdio_devices[i]->name,
+ sizeof(temp_names[i]));
}
- list_del(&(dev->list));
+ list_del(&dev->list);
free(dev);
- /* reassign Device list */
- list_for_each(pos, &(devs.list)) {
+ /* reassign device list */
+ list_for_each(pos, &devs.list) {
dev = list_entry(pos, struct stdio_dev, list);
- for (l=0 ; l< MAX_FILES; l++) {
- if(strcmp(dev->name, temp_names[l]) == 0)
- stdio_devices[l] = dev;
+ for (i = 0 ; i < MAX_FILES; i++) {
+ if (strcmp(dev->name, temp_names[i]) == 0)
+ stdio_devices[i] = dev;
}
}
+
return 0;
}
struct stdio_dev *dev;
dev = stdio_get_by_name(devname);
-
if (!dev) /* device not found */
return -ENODEV;
return stdio_deregister_dev(dev, force);
}
-#endif /* CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) */
int stdio_init_tables(void)
{
#endif /* CONFIG_NEEDS_MANUAL_RELOC */
/* Initialize the list */
- INIT_LIST_HEAD(&(devs.list));
+ INIT_LIST_HEAD(&devs.list);
return 0;
}
int stdio_add_devices(void)
{
-#ifdef CONFIG_DM_KEYBOARD
struct udevice *dev;
struct uclass *uc;
int ret;
- /*
- * For now we probe all the devices here. At some point this should be
- * done only when the devices are required - e.g. we have a list of
- * input devices to start up in the stdin environment variable. That
- * work probably makes more sense when stdio itself is converted to
- * driver model.
- *
- * TODO(sjg@chromium.org): Convert changing uclass_first_device() etc.
- * to return the device even on error. Then we could use that here.
- */
- ret = uclass_get(UCLASS_KEYBOARD, &uc);
- if (ret)
- return ret;
-
- /* Don't report errors to the caller - assume that they are non-fatal */
- uclass_foreach_dev(dev, uc) {
- ret = device_probe(dev);
+ if (IS_ENABLED(CONFIG_DM_KEYBOARD)) {
+ /*
+ * For now we probe all the devices here. At some point this
+ * should be done only when the devices are required - e.g. we
+ * have a list of input devices to start up in the stdin
+ * environment variable. That work probably makes more sense
+ * when stdio itself is converted to driver model.
+ *
+ * TODO(sjg@chromium.org): Convert changing
+ * uclass_first_device() etc. to return the device even on
+ * error. Then we could use that here.
+ */
+ ret = uclass_get(UCLASS_KEYBOARD, &uc);
if (ret)
- printf("Failed to probe keyboard '%s'\n", dev->name);
+ return ret;
+
+ /*
+ * Don't report errors to the caller - assume that they are
+ * non-fatal
+ */
+ uclass_foreach_dev(dev, uc) {
+ ret = device_probe(dev);
+ if (ret)
+ printf("Failed to probe keyboard '%s'\n",
+ dev->name);
+ }
}
-#endif
#ifdef CONFIG_SYS_I2C
i2c_init_all();
-#else
#endif
-#ifdef CONFIG_DM_VIDEO
- /*
- * If the console setting is not in environment variables then
- * console_init_r() will not be calling iomux_doenv() (which calls
- * search_device()). So we will not dynamically add devices by
- * calling stdio_probe_device().
- *
- * So just probe all video devices now so that whichever one is
- * required will be available.
- */
-#ifndef CONFIG_SYS_CONSOLE_IS_IN_ENV
- struct udevice *vdev;
-# ifndef CONFIG_DM_KEYBOARD
- int ret;
-# endif
-
- for (ret = uclass_first_device(UCLASS_VIDEO, &vdev);
- vdev;
- ret = uclass_next_device(&vdev))
- ;
- if (ret)
- printf("%s: Video device failed (ret=%d)\n", __func__, ret);
-#endif /* !CONFIG_SYS_CONSOLE_IS_IN_ENV */
-#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_CMD_BMP)
- splash_display();
-#endif /* CONFIG_SPLASH_SCREEN && CONFIG_CMD_BMP */
-#else
-# if defined(CONFIG_LCD)
- drv_lcd_init ();
-# endif
-# if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
- drv_video_init ();
-# endif
-#endif /* CONFIG_DM_VIDEO */
+ if (IS_ENABLED(CONFIG_DM_VIDEO)) {
+ /*
+ * If the console setting is not in environment variables then
+ * console_init_r() will not be calling iomux_doenv() (which
+ * calls search_device()). So we will not dynamically add
+ * devices by calling stdio_probe_device().
+ *
+ * So just probe all video devices now so that whichever one is
+ * required will be available.
+ */
+ struct udevice *vdev;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_SYS_CONSOLE_IS_IN_ENV)) {
+ for (ret = uclass_first_device(UCLASS_VIDEO, &vdev);
+ vdev;
+ ret = uclass_next_device(&vdev))
+ ;
+ if (ret)
+ printf("%s: Video device failed (ret=%d)\n",
+ __func__, ret);
+ }
+ if (IS_ENABLED(CONFIG_SPLASH_SCREEN) &&
+ IS_ENABLED(CONFIG_CMD_BMP))
+ splash_display();
+ } else {
+ if (IS_ENABLED(CONFIG_LCD))
+ drv_lcd_init();
+ if (IS_ENABLED(CONFIG_VIDEO) || IS_ENABLED(CONFIG_CFB_CONSOLE))
+ drv_video_init();
+ }
+
#if defined(CONFIG_KEYBOARD) && !defined(CONFIG_DM_KEYBOARD)
- drv_keyboard_init ();
+ drv_keyboard_init();
#endif
- drv_system_init ();
- serial_stdio_init ();
+ drv_system_init();
+ serial_stdio_init();
#ifdef CONFIG_USB_TTY
- drv_usbtty_init ();
-#endif
-#ifdef CONFIG_NETCONSOLE
- drv_nc_init ();
+ drv_usbtty_init();
#endif
+ if (IS_ENABLED(CONFIG_NETCONSOLE))
+ drv_nc_init();
#ifdef CONFIG_JTAG_CONSOLE
- drv_jtag_console_init ();
-#endif
-#ifdef CONFIG_CBMEM_CONSOLE
- cbmemc_init();
+ drv_jtag_console_init();
#endif
+ if (IS_ENABLED(CONFIG_CBMEM_CONSOLE))
+ cbmemc_init();
return 0;
}
CONFIG_TARGET_M5249EVB=y
CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SYS_DEVICE_NULLDEV=y
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTOBOOT is not set
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_OF_TRANSLATE is not set
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
+CONFIG_SYS_DEVICE_NULLDEV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
CONFIG_VIDEO_FSL_DCU_FB=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_MTD=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_MTD=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x100000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x3D0000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_MII=y
CONFIG_VIDEO=y
# CONFIG_CFB_CONSOLE is not set
+CONFIG_SPLASH_SCREEN=y
CONFIG_MII=y
CONFIG_VIDEO=y
# CONFIG_CFB_CONSOLE is not set
+CONFIG_SPLASH_SCREEN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFF84000
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_DM_VIDEO=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_SHA1=y
CONFIG_SHA256=y
CONFIG_HEXDUMP=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_IS_IN_EEPROM=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_EEPROM=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_EEPROM=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASHIMAGE_GUARD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
CONFIG_IMX_WATCHDOG=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_STORAGE=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ERRNO_STR=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ERRNO_STR=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_VIDEO=y
CONFIG_CFB_CONSOLE_ANSI=y
# CONFIG_VGA_AS_SINGLE_DEVICE is not set
+CONFIG_SPLASH_SCREEN=y
# CONFIG_GZIP is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_FSL_USDHC=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SMBIOS_MANUFACTURER="Hardkernel Co., Ltd."
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_SYS_CONSOLE_BG_COL=0xff
CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_SPL_OF_LIBFDT=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_SYS_CONSOLE_BG_COL=0xff
CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_VIDEO_NX_RGB=y
CONFIG_VIDEO_NX_LVDS=y
CONFIG_VIDEO_NX_HDMI=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_ERRNO_STR=y
CONFIG_VIDEO_SANDBOX_SDL=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_WDT=y
CONFIG_WDT_SANDBOX=y
CONFIG_FS_CBFS=y
CONFIG_VIDEO_DSI_HOST_SANDBOX=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_W1=y
CONFIG_W1_GPIO=y
CONFIG_W1_EEPROM=y
CONFIG_VIDEO_SANDBOX_SDL=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_FS_CBFS=y
CONFIG_FS_CRAMFS=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
CONFIG_CMD_FAT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_MTD=y
CONFIG_VIDEO_STM32=y
CONFIG_VIDEO_STM32_MAX_XRES=480
CONFIG_VIDEO_STM32_MAX_YRES=640
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=480
CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CMD_FAT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
- When the console devices have been initialized, "stdout" and
"stderr" are set to "nulldev", so subsequent messages are
suppressed automatically. Make sure to enable "nulldev" by
- #defining CONFIG_SYS_DEVICE_NULLDEV in your board config file.
+ enabling CONFIG_SYS_DEVICE_NULLDEV in your board defconfig file.
- When booting a linux kernel, the "bootargs" are fixed up so that
the argument "console=" will be in the command line, no matter how
out On-screen Display (OSD) used on gdsys FPGAs to control dynamic
textual overlays of the display outputs.
+config SPLASH_SCREEN
+ bool "Show a splash-screen image"
+ help
+ If this option is set, the environment is checked for a variable
+ "splashimage". If found, the usual display of logo, copyright and
+ system information on the LCD is suppressed and the BMP image at the
+ address specified in "splashimage" is loaded instead. The console is
+ redirected to the "nulldev", too. This allows for a "silent" boot
+ where a splash screen is loaded very quickly after power-on.
+
+ The splash_screen_prepare() function is a weak function defined in
+ common/splash.c. It is called as part of the splash screen display
+ sequence. It gives the board an opportunity to prepare the splash
+ image data before it is processed and sent to the frame buffer by
+ U-Boot. Define your own version to use this feature.
+
+config SPLASHIMAGE_GUARD
+ bool "Support unaligned BMP images"
+ depends on SPLASH_SCREEN
+ help
+ If this option is set, then U-Boot will prevent the environment
+ variable "splashimage" from being set to a problematic address
+ (see doc/README.displaying-bmps).
+
+ This option is useful for targets where, due to alignment
+ restrictions, an improperly aligned BMP image will cause a data
+ abort. If you think you will not have problems with unaligned
+ accesses (for example because your toolchain prevents them)
+ there is no need to set this option.
+
+config SPLASH_SCREEN_ALIGN
+ bool "Allow positioning the splash image anywhere on the display"
+ depends on SPLASH_SCREEN || CMD_BMP
+ help
+ If this option is set the splash image can be freely positioned
+ on the screen. Environment variable "splashpos" specifies the
+ position as "x,y". If a positive number is given it is used as
+ number of pixel from left/top. If a negative number is given it
+ is used as number of pixel from right/bottom. You can also
+ specify 'm' for centering the image.
+
+ Example:
+ setenv splashpos m,m
+ => image at center of screen
+
+ setenv splashpos 30,20
+ => image at x = 30 and y = 20
+
+ setenv splashpos -10,m
+ => vertically centered image
+ at x = dspWidth - bmpWidth - 9
+
+config SPLASH_SOURCE
+ bool "Control the source of the splash image"
+ depends on SPLASH_SCREEN
+ help
+ Use the splash_source.c library. This library provides facilities to
+ declare board specific splash image locations, routines for loading
+ splash image from supported locations, and a way of controlling the
+ selected splash location using the "splashsource" environment
+ variable.
+
+ This CONFIG works as follows:
+
+ - If splashsource is set to a supported location name as defined by
+ board code, use that splash location.
+ - If splashsource is undefined, use the first splash location as
+ default.
+ - If splashsource is set to an unsupported value, do not load a splash
+ screen.
+
+ A splash source location can describe either storage with raw data, a
+ storage formatted with a file system or a FIT image. In case of a
+ filesystem, the splash screen data is loaded as a file. The name of
+ the splash screen file can be controlled with the environment variable
+ "splashfile".
+
+ To enable loading the splash image from a FIT image, CONFIG_FIT must
+ be enabled. The FIT image has to start at the 'offset' field address
+ in the selected splash location. The name of splash image within the
+ FIT shall be specified by the environment variable "splashfile".
+
+ In case the environment variable "splashfile" is not defined the
+ default name 'splash.bmp' will be used.
+
endmenu
/* LCD */
#ifdef CONFIG_CMD_BMP
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_LCD_LOGO
#define CONFIG_SHARP_LQ035Q7DH06
#endif
*/
#undef CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
-
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer and LCD */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer */
/* check this console not needed, after test remove it */
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_NET_RETRY_COUNT 10
/* Network console */
-#define CONFIG_NETCONSOLE 1
#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
/* As stated above, the following choices are optional. */
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Display */
#define CONFIG_IMX_HDMI
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SOURCE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_MXS
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer and LCD */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_BOOTP_BOOTFILESIZE
#endif
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
/*
* Clock Configuration
*/
#define CONFIG_SKIP_LOWLEVEL_INIT
#ifdef CONFIG_VIDEO_FSL_DCU_FB
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SYS_FSL_DCU_LE
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
#endif
/*
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_HW_WATCHDOG
/* Network hardware configuration */
#define CONFIG_DRIVER_EP93XX_MAC
#define CONFIG_MII_SUPPRESS_PREAMBLE
-#undef CONFIG_NETCONSOLE
/* SDRAM configuration */
#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */
#define CONFIG_PHY_BASE_ADR 0x8
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#endif
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USBD_HS
-#define CONFIG_NETCONSOLE
/* Framebuffer and LCD */
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
/* Miscellaneous configurable options */
#ifdef CONFIG_VIDEO_IPUV3
# define CONFIG_IMX_VIDEO_SKIP
-# define CONFIG_SPLASH_SCREEN
-# define CONFIG_SPLASH_SCREEN_ALIGN
# define CONFIG_BMP_16BPP
# define CONFIG_VIDEO_BMP_RLE8
# define CONFIG_VIDEO_LOGO
#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
#endif
/*
*/
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASHIMAGE_GUARD
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
/* LVDS display */
#define CONFIG_SYS_LDB_CLOCK 33260000
#define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_SPLASH_SOURCE
/* IIM Fuses */
#define CONFIG_FSL_IIM
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define STDOUT_CFG "vidconsole,serial"
#else
#define STDOUT_CFG "serial"
/* Framebuffer support */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
/* Framebuffer support */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_USBD_HS
-#define CONFIG_NETCONSOLE
#define CONFIG_MXC_UART_BASE UART2_BASE
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_SPLASH_SCREEN
/* functions for cfb_console */
#define VIDEO_KBD_INIT_FCT rx51_kp_init()
#define CONFIG_MXC_USB_FLAGS 0
/* Gadget part */
#define CONFIG_USBD_HS
-#define CONFIG_NETCONSOLE
#endif
/* Video output */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
/* Ethernet driver configuration */
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 1
#define CONFIG_RESET_PHY_R
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_SPLASH_SOURCE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_BMP_16BPP
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-
#ifdef CONFIG_VIDEO_LOGO
#ifdef CONFIG_DM_VIDEO
#endif
#ifdef CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SOURCE 1
-#define CONFIG_SPLASH_SCREEN_ALIGN 1
#define SPLASH_FILE logo.bmp
#endif
#define LCD_BPP LCD_COLOR16
#define CONFIG_LCD_BMP_RLE8
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_KEYBOARD
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#define CONFIG_NETCONSOLE
#endif
/* The rest of the configuration is shared */
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#endif
#endif /* __CONFIG_H */
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#define CONFIG_NETCONSOLE
#endif
/* The rest of the configuration is shared */
/*
* PROTOTYPES
*/
-int stdio_register (struct stdio_dev * dev);
+int stdio_register(struct stdio_dev *dev);
int stdio_register_dev(struct stdio_dev *dev, struct stdio_dev **devp);
/**
*/
int stdio_init(void);
-void stdio_print_current_devices(void);
-#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
+void stdio_print_current_devices(void);
int stdio_deregister(const char *devname, int force);
-int stdio_deregister_dev(struct stdio_dev *dev, int force);
-#endif
-struct list_head* stdio_get_list(void);
-struct stdio_dev* stdio_get_by_name(const char* name);
-struct stdio_dev* stdio_clone(struct stdio_dev *dev);
-#ifdef CONFIG_LCD
-int drv_lcd_init (void);
-#endif
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-int drv_video_init (void);
-#endif
-#ifdef CONFIG_KEYBOARD
-int drv_keyboard_init (void);
-#endif
-#ifdef CONFIG_USB_TTY
-int drv_usbtty_init (void);
-#endif
-#ifdef CONFIG_NETCONSOLE
-int drv_nc_init (void);
-#endif
-#ifdef CONFIG_JTAG_CONSOLE
-int drv_jtag_console_init (void);
-#endif
-#ifdef CONFIG_CBMEM_CONSOLE
+/**
+ * stdio_deregister_dev() - deregister the device "devname".
+ *
+ * @dev: Stdio device to deregister
+ * @force: true to force deregistration even if in use
+ *
+ * returns 0 on success, -EBUSY if device is assigned
+ */
+int stdio_deregister_dev(struct stdio_dev *dev, int force);
+struct list_head *stdio_get_list(void);
+struct stdio_dev *stdio_get_by_name(const char *name);
+struct stdio_dev *stdio_clone(struct stdio_dev *dev);
+
+int drv_lcd_init(void);
+int drv_video_init(void);
+int drv_keyboard_init(void);
+int drv_usbtty_init(void);
+int drv_nc_init(void);
+int drv_jtag_console_init(void);
int cbmemc_init(void);
-#endif
#endif
CONFIG_SPI_IDLE_VAL
CONFIG_SPI_LENGTH
CONFIG_SPI_N25Q256A_RESET
-CONFIG_SPLASHIMAGE_GUARD
-CONFIG_SPLASH_SCREEN
-CONFIG_SPLASH_SCREEN_ALIGN
-CONFIG_SPLASH_SOURCE
CONFIG_SPLL_FREQ
CONFIG_SPL_
CONFIG_SPL_ATMEL_SIZE
CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
CONFIG_SYS_DEFAULT_VIDEO_MODE
CONFIG_SYS_DEF_EEPROM_ADDR
-CONFIG_SYS_DEVICE_NULLDEV
CONFIG_SYS_DFU_DATA_BUF_SIZE
CONFIG_SYS_DFU_MAX_FILE_SIZE
CONFIG_SYS_DIAG_ADDR
if dirpath == os.path.join('include', 'generated'):
continue
for filename in filenames:
- if not filename.endswith(('~', '.dts', '.dtsi')):
+ if not filename.endswith(('~', '.dts', '.dtsi', '.bin',
+ '.elf')):
header_path = os.path.join(dirpath, filename)
# This file contains UTF-16 data and no CONFIG symbols
if header_path == 'include/video_font_data.h':
projects / platform / kernel / u-boot.git / commitdiff