ifneq ($(CONFIG_SUNXI),)
OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
+ u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
$(call if_changed,pad_cat)
endif
select CPU_V7
select SUPPORT_SPL
-config TARGET_SUN4I
- bool "Support sun4i"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SUN5I
- bool "Support sun5i"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SUN6I
- bool "Support sun6i"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SUN7I
- bool "Support sun7i"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SUN8I
- bool "Support sun8i"
- select CPU_V7
- select SUPPORT_SPL
+config ARCH_SUNXI
+ bool "Support sunxi (Allwinner) SoCs"
config TARGET_SNOWBALL
bool "Support snowball"
obj-y += board.o
obj-y += clock.o
obj-y += pinmux.o
-obj-$(CONFIG_SUN6I) += prcm.o
-obj-$(CONFIG_SUN8I) += prcm.o
-obj-$(CONFIG_SUN4I) += clock_sun4i.o
-obj-$(CONFIG_SUN5I) += clock_sun4i.o
-obj-$(CONFIG_SUN6I) += clock_sun6i.o
-obj-$(CONFIG_SUN7I) += clock_sun4i.o
-obj-$(CONFIG_SUN8I) += clock_sun6i.o
+obj-$(CONFIG_MACH_SUN6I) += prcm.o
+obj-$(CONFIG_MACH_SUN8I) += prcm.o
+obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
+obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
+obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
+obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
+obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
ifndef CONFIG_SPL_BUILD
obj-y += cpu_info.o
endif
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SUN4I) += dram.o
-obj-$(CONFIG_SUN5I) += dram.o
-obj-$(CONFIG_SUN7I) += dram.o
+obj-$(CONFIG_MACH_SUN4I) += dram.o
+obj-$(CONFIG_MACH_SUN5I) += dram.o
+obj-$(CONFIG_MACH_SUN7I) += dram.o
ifdef CONFIG_SPL_FEL
obj-y += start.o
endif
int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I)
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I)
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX);
sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
void reset_cpu(ulong addr)
{
-#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
static const struct sunxi_wdog *wdog =
&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
/* sun5i sometimes gets stuck without this */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
}
-#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
+#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */
static const struct sunxi_wdog *wdog =
((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
/* do some early init */
void s_init(void)
{
-#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \
- defined CONFIG_SUN6I || defined CONFIG_SUN8I)
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \
+ defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
APB0_DIV_1 << APB0_DIV_SHIFT |
CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
&ccm->cpu_ahb_apb0_cfg);
-#ifdef CONFIG_SUN7I
+#ifdef CONFIG_MACH_SUN7I
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA);
#endif
writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
-#ifdef CONFIG_SUN4I
+#ifdef CONFIG_MACH_SUN4I
puts("CPU: Allwinner A10 (SUN4I)\n");
-#elif defined CONFIG_SUN5I
+#elif defined CONFIG_MACH_SUN5I
u32 val = readl(SUNXI_SID_BASE + 0x08);
switch ((val >> 12) & 0xf) {
case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break;
case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break;
default: puts("CPU: Allwinner A1X (SUN5I)\n");
}
-#elif defined CONFIG_SUN6I
+#elif defined CONFIG_MACH_SUN6I
puts("CPU: Allwinner A31 (SUN6I)\n");
-#elif defined CONFIG_SUN7I
+#elif defined CONFIG_MACH_SUN7I
puts("CPU: Allwinner A20 (SUN7I)\n");
-#elif defined CONFIG_SUN8I
+#elif defined CONFIG_MACH_SUN8I
puts("CPU: Allwinner A23 (SUN8I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
struct sunxi_dram_reg *dram =
(struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-#ifdef CONFIG_SUN4I
+#ifdef CONFIG_MACH_SUN4I
struct sunxi_timer_reg *timer =
(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
u32 reg_val;
{
struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-#ifdef CONFIG_SUN7I
+#ifdef CONFIG_MACH_SUN7I
clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
#else
clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
}
static u32 hpcr_value[32] = {
-#ifdef CONFIG_SUN5I
+#ifdef CONFIG_MACH_SUN5I
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0x0301, 0x0301, 0x0301, 0x0301,
0x0301, 0x0301, 0x0301, 0
#endif
-#ifdef CONFIG_SUN4I
+#ifdef CONFIG_MACH_SUN4I
0x0301, 0x0301, 0x0301, 0x0301,
0x0301, 0x0301, 0, 0,
0, 0, 0, 0,
0x1035, 0x1031, 0x0731, 0x1035,
0x1031, 0x0301, 0x0301, 0x0731
#endif
-#ifdef CONFIG_SUN7I
+#ifdef CONFIG_MACH_SUN7I
0x0301, 0x0301, 0x0301, 0x0301,
0x0301, 0x0301, 0x0301, 0x0301,
0, 0, 0, 0,
setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
-#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
/* reset GPS */
clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
/* PLL5P and PLL6 are the potential clock sources for MBUS */
pll6x_clk = clock_get_pll6() / 1000000;
-#ifdef CONFIG_SUN7I
+#ifdef CONFIG_MACH_SUN7I
pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
#endif
pll5p_clk = clock_get_pll5p() / 1000000;
* open DRAMC AHB & DLL register clock
* close it first
*/
-#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
#else
clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
udelay(22);
/* then open it */
-#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
#else
setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
static void dramc_clock_output_en(u32 on)
{
-#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
if (on)
else
clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
#endif
-#ifdef CONFIG_SUN4I
+#ifdef CONFIG_MACH_SUN4I
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (on)
setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
u32 reg_val;
u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF;
-#ifndef CONFIG_SUN7I
+#ifndef CONFIG_MACH_SUN7I
/* Appears that some kind of automatically initiated default
* ZQ calibration is already in progress at this point on sun4i/sun5i
* hardware, but not on sun7i. So it is reasonable to wait for its
if (!odt_en)
return;
-#ifdef CONFIG_SUN7I
+#ifdef CONFIG_MACH_SUN7I
/* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock
* unless bit 24 is set in SDR_ZQCR1. Not much is known about the
* SDR_ZQCR1 register, but there are hints indicating that it might
/* dram clock off */
dramc_clock_output_en(0);
-#ifdef CONFIG_SUN4I
+#ifdef CONFIG_MACH_SUN4I
/* select dram controller 1 */
writel(DRAM_CSEL_MAGIC, &dram->csel);
#endif
writel(para->tpr2, &dram->tpr2);
reg_val = DRAM_MR_BURST_LENGTH(0x0);
-#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
+#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I))
reg_val |= DRAM_MR_POWER_DOWN;
#endif
reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
/* disable drift compensation and set passive DQS window mode */
clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
-#ifdef CONFIG_SUN7I
+#ifdef CONFIG_MACH_SUN7I
/* Command rate timing mode 2T & 1T */
if (para->tpr4 & 0x1)
setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
/* try to autodetect the DRAM bus width and density */
para->io_width = 16;
para->bus_width = 32;
-#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I)
/* only A0-A14 address lines on A10/A13, limiting max density to 4096 */
para->density = 4096;
#else
#include <asm/io.h>
#include <asm/arch/gpio.h>
-int sunxi_gpio_set_cfgpin(u32 pin, u32 val)
+void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val)
{
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_CFG_INDEX(pin);
- u32 offset = GPIO_CFG_OFFSET(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ u32 index = GPIO_CFG_INDEX(bank_offset);
+ u32 offset = GPIO_CFG_OFFSET(bank_offset);
clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
-
- return 0;
}
-int sunxi_gpio_get_cfgpin(u32 pin)
+void sunxi_gpio_set_cfgpin(u32 pin, u32 val)
{
- u32 cfg;
u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_CFG_INDEX(pin);
- u32 offset = GPIO_CFG_OFFSET(pin);
struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ sunxi_gpio_set_cfgbank(pio, pin, val);
+}
+
+int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset)
+{
+ u32 index = GPIO_CFG_INDEX(bank_offset);
+ u32 offset = GPIO_CFG_OFFSET(bank_offset);
+ u32 cfg;
+
cfg = readl(&pio->cfg[0] + index);
cfg >>= offset;
return cfg & 0xf;
}
+int sunxi_gpio_get_cfgpin(u32 pin)
+{
+ u32 bank = GPIO_BANK(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ return sunxi_gpio_get_cfgbank(pio, pin);
+}
+
int sunxi_gpio_set_drv(u32 pin, u32 val)
{
u32 bank = GPIO_BANK(pin);
+dtb-$(CONFIG_MACH_SUN7I) += sun7i-a20-pcduino3.dtb
dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
--- /dev/null
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "LinkSprite pcDuino3";
+ compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ahci: sata@01c18000 {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
+ allwinner,pins = "PH2";
+ };
+
+ led_pins_pcduino3: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ key_pins_pcduino3: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_pcduino3>;
+
+ tx {
+ label = "pcduino3:green:tx";
+ gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rx {
+ label = "pcduino3:green:rx";
+ gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_pcduino3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@0 {
+ label = "Key Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+ };
+ button@1 {
+ label = "Key Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Key Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+
+ reg_ahci_5v: ahci-5v {
+ gpio = <&pio 7 2 0>;
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ ethernet0 = &gmac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+ interrupts = <0 120 4>,
+ <0 121 4>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: clk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ pll4: clk@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-pll4-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll4";
+ };
+
+ pll5: clk@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
+ pll8: clk@01c20040 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-pll4-clk";
+ reg = <0x01c20040 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll8";
+ };
+
+ cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-axi-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb: ahb@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&axi>;
+ clock-output-names = "ahb";
+ };
+
+ ahb_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb>;
+ clock-output-names = "ahb_usb0", "ahb_ehci0",
+ "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+ "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+ "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+ "ahb_nand", "ahb_sdram", "ahb_ace",
+ "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+ "ahb_spi2", "ahb_spi3", "ahb_sata",
+ "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+ "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+ "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+ "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+ "ahb_de_fe1", "ahb_gmac", "ahb_mp",
+ "ahb_mali";
+ };
+
+ apb0: apb0@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: clk@01c20068 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_codec", "apb0_spdif",
+ "apb0_ac97", "apb0_iis0", "apb0_iis1",
+ "apb0_pio", "apb0_ir0", "apb0_ir1",
+ "apb0_iis2", "apb0_keypad";
+ };
+
+ apb1_mux: apb1_mux@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
+ };
+
+ apb1: apb1@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
+ };
+
+ apb1_gates: clk@01c2006c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb1>;
+ clock-output-names = "apb1_i2c0", "apb1_i2c1",
+ "apb1_i2c2", "apb1_i2c3", "apb1_can",
+ "apb1_scr", "apb1_ps20", "apb1_ps21",
+ "apb1_i2c4", "apb1_uart0", "apb1_uart1",
+ "apb1_uart2", "apb1_uart3", "apb1_uart4",
+ "apb1_uart5", "apb1_uart6", "apb1_uart7";
+ };
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc3";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ pata_clk: clk@01c200ac {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200ac 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "pata";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ ir1_clk: clk@01c200b4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200b4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir1";
+ };
+
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun4i-a10-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ };
+
+ spi3_clk: clk@01c200d4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200d4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi3";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
+
+ /*
+ * The following two are dummy clocks, placeholders used in the gmac_tx
+ * clock. The gmac driver will choose one parent depending on the PHY
+ * interface mode, using clk_set_rate auto-reparenting.
+ * The actual TX clock rate is not controlled by the gmac_tx clock.
+ */
+ mii_phy_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: clk@3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@01c20164 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c20164 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
+ /*
+ * Dummy clock used by output clocks
+ */
+ osc24M_32k: clk@1 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <750>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc24M_32k";
+ };
+
+ clk_out_a: clk@01c201f0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f0 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_a";
+ };
+
+ clk_out_b: clk@01c201f4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f4 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_b";
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nmi_intc: interrupt-controller@01c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupts = <0 0 4>;
+ };
+
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <0 10 4>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <0 11 4>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emac: ethernet@01c0b000 {
+ compatible = "allwinner,sun4i-a10-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <0 55 4>;
+ clocks = <&ahb_gates 17>;
+ status = "disabled";
+ };
+
+ mdio@01c0b080 {
+ compatible = "allwinner,sun4i-a10-mdio";
+ reg = <0x01c0b080 0x14>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 32 4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 33 4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 34 4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 35 4>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun7i-a20-usb-phy";
+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+ reg-names = "phy_ctrl", "pmu1", "pmu2";
+ clocks = <&usb_clk 8>;
+ clock-names = "usb_phy";
+ resets = <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb1_reset", "usb2_reset";
+ status = "disabled";
+ };
+
+ ehci0: usb@01c14000 {
+ compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+ reg = <0x01c14000 0x100>;
+ interrupts = <0 39 4>;
+ clocks = <&ahb_gates 1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@01c14400 {
+ compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <0 64 4>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <0 12 4>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <0 56 4>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ status = "disabled";
+ };
+
+ ehci1: usb@01c1c000 {
+ compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <0 40 4>;
+ clocks = <&ahb_gates 3>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c1c400 {
+ compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <0 65 4>;
+ clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ spi3: spi@01c1f000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c1f000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun7i-a20-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <0 28 4>;
+ clocks = <&apb0_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ pwm0_pins_a: pwm0@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ pwm1_pins_a: pwm1@0 {
+ allwinner,pins = "PI3";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB22", "PB23";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart2_pins_a: uart2@0 {
+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,function = "uart2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart6_pins_a: uart6@0 {
+ allwinner,pins = "PI12", "PI13";
+ allwinner,function = "uart6";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart7_pins_a: uart7@0 {
+ allwinner,pins = "PI20", "PI21";
+ allwinner,function = "uart7";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PB18", "PB19";
+ allwinner,function = "i2c1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PB20", "PB21";
+ allwinner,function = "i2c2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ emac_pins_a: emac0@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "emac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ clk_out_a_pins_a: clk_out_a@0 {
+ allwinner,pins = "PI12";
+ allwinner,function = "clk_out_a";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ clk_out_b_pins_a: clk_out_b@0 {
+ allwinner,pins = "PI13";
+ allwinner,function = "clk_out_b";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA10",
+ "PA11", "PA12", "PA13",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ spi1_pins_a: spi1@0 {
+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,function = "spi2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc3_pins_a: mmc3@0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ ir0_pins_a: ir0@0 {
+ allwinner,pins = "PB3","PB4";
+ allwinner,function = "ir0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ ir1_pins_a: ir1@0 {
+ allwinner,pins = "PB22","PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <0 22 4>,
+ <0 23 4>,
+ <0 24 4>,
+ <0 25 4>,
+ <0 67 4>,
+ <0 68 4>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-a10-wdt";
+ reg = <0x01c20c90 0x10>;
+ };
+
+ rtc: rtc@01c20d00 {
+ compatible = "allwinner,sun7i-a20-rtc";
+ reg = <0x01c20d00 0x20>;
+ interrupts = <0 24 4>;
+ };
+
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun7i-a20-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ ir0: ir@01c21800 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 5 4>;
+ reg = <0x01c21800 0x40>;
+ status = "disabled";
+ };
+
+ ir1: ir@01c21c00 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 6 4>;
+ reg = <0x01c21c00 0x40>;
+ status = "disabled";
+ };
+
+ sid: eeprom@01c23800 {
+ compatible = "allwinner,sun7i-a20-sid";
+ reg = <0x01c23800 0x200>;
+ };
+
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun4i-a10-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <0 29 4>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <0 1 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 16>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <0 2 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 17>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <0 3 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 18>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <0 4 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 19>;
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <0 17 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 20>;
+ status = "disabled";
+ };
+
+ uart5: serial@01c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <0 18 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 21>;
+ status = "disabled";
+ };
+
+ uart6: serial@01c29800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29800 0x400>;
+ interrupts = <0 19 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 22>;
+ status = "disabled";
+ };
+
+ uart7: serial@01c29c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29c00 0x400>;
+ interrupts = <0 20 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 23>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <0 7 4>;
+ clocks = <&apb1_gates 0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <0 8 4>;
+ clocks = <&apb1_gates 1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <0 9 4>;
+ clocks = <&apb1_gates 2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@01c2b800 {
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b800 0x400>;
+ interrupts = <0 88 4>;
+ clocks = <&apb1_gates 3>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@01c2c000 {
+ compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2c000 0x400>;
+ interrupts = <0 89 4>;
+ clocks = <&apb1_gates 15>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>;
+ interrupts = <0 85 4>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ hstimer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 81 4>,
+ <0 82 4>,
+ <0 83 4>,
+ <0 84 4>;
+ clocks = <&ahb_gates 28>;
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <1 9 0xf04>;
+ };
+ };
+};
--- /dev/null
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc@01c00000 {
+ pio: pinctrl@01c20800 {
+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH6";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
+ allwinner,pins = "PH3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ahci_pwr_pin_a>;
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 1 8 0>;
+ status = "disabled";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 6 0>;
+ status = "disabled";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_pin_a>;
+ regulator-name = "usb2-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 3 0>;
+ status = "disabled";
+ };
+
+ reg_vcc3v0: vcc3v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
#define CLK_GATE_CLOSE 0x0
/* clock control module regs definition */
-#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
#include <asm/arch/clock_sun6i.h>
#else
#include <asm/arch/clock_sun4i.h>
#define SUNXI_GPF2_SDC0 2
-#ifdef CONFIG_SUN8I
+#ifdef CONFIG_MACH_SUN8I
#define SUNXI_GPF2_UART0_TX 3
#define SUNXI_GPF4_UART0_RX 3
#else
#define SUNXI_GPIO_PULL_UP 1
#define SUNXI_GPIO_PULL_DOWN 2
-int sunxi_gpio_set_cfgpin(u32 pin, u32 val);
+void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val);
+void sunxi_gpio_set_cfgpin(u32 pin, u32 val);
+int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset);
int sunxi_gpio_get_cfgpin(u32 pin);
int sunxi_gpio_set_drv(u32 pin, u32 val);
int sunxi_gpio_set_pull(u32 pin, u32 val);
u32 chda; /* 0x90 */
u32 cbda; /* 0x94 */
u32 res1[26];
-#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
u32 res2[64];
#endif
u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */
struct sunxi_timer timer[6]; /* We have 6 timers */
u8 res2[16];
struct sunxi_avs avs;
-#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
struct sunxi_wdog wdog; /* 0x90 */
/* XXX the following is not accurate for sun5i/sun7i */
struct sunxi_64cnt cnt64; /* 0xa0 */
struct sunxi_tgp tgp[4];
u8 res5[8];
u32 cpu_cfg;
-#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */
+#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || ... */
u8 res3[16];
struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */
#endif
#define WDT_CTRL_RESTART (0x1 << 0)
#define WDT_CTRL_KEY (0x0a57 << 1)
-#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
#define WDT_MODE_EN (0x1 << 0)
#define WDT_MODE_RESET_EN (0x1 << 1)
-if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I || TARGET_SUN8I
+if ARCH_SUNXI
+
+choice
+ prompt "Sunxi SoC Variant"
+
+config MACH_SUN4I
+ bool "sun4i (Allwinner A10)"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config MACH_SUN5I
+ bool "sun5i (Allwinner A13)"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config MACH_SUN6I
+ bool "sun6i (Allwinner A31)"
+ select CPU_V7
+
+config MACH_SUN7I
+ bool "sun7i (Allwinner A20)"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config MACH_SUN8I
+ bool "sun8i (Allwinner A23)"
+ select CPU_V7
+
+endchoice
config SYS_CONFIG_NAME
string
- default "sun4i" if TARGET_SUN4I
- default "sun5i" if TARGET_SUN5I
- default "sun6i" if TARGET_SUN6I
- default "sun7i" if TARGET_SUN7I
- default "sun8i" if TARGET_SUN8I
+ default "sun4i" if MACH_SUN4I
+ default "sun5i" if MACH_SUN5I
+ default "sun6i" if MACH_SUN6I
+ default "sun7i" if MACH_SUN7I
+ default "sun8i" if MACH_SUN8I
+
+choice
+ prompt "Board"
+
+config TARGET_A10_OLINUXINO_L
+ bool "A10_OLINUXINO_L"
+ depends on MACH_SUN4I
+
+config TARGET_A10S_OLINUXINO_M
+ bool "A10S_OLINUXINO_M"
+ depends on MACH_SUN5I
+
+config TARGET_A13_OLINUXINOM
+ bool "A13_OLINUXINOM"
+ depends on MACH_SUN5I
+
+config TARGET_A13_OLINUXINO
+ bool "A13_OLINUXINO"
+ depends on MACH_SUN5I
+
+config TARGET_A20_OLINUXINO_L2
+ bool "A20_OLINUXINO_L2"
+ depends on MACH_SUN7I
+
+config TARGET_A20_OLINUXINO_L
+ bool "A20_OLINUXINO_L"
+ depends on MACH_SUN7I
+
+config TARGET_A20_OLINUXINO_M
+ bool "A20_OLINUXINO_M"
+ depends on MACH_SUN7I
+
+config TARGET_AUXTEK_T004
+ bool "AUXTEK_T004"
+ depends on MACH_SUN5I
+
+config TARGET_BANANAPI
+ bool "BANANAPI"
+ depends on MACH_SUN7I
+
+config TARGET_COLOMBUS
+ bool "COLOMBUS"
+ depends on MACH_SUN6I
+
+config TARGET_CUBIEBOARD2
+ bool "CUBIEBOARD2"
+ depends on MACH_SUN7I
+
+config TARGET_CUBIEBOARD
+ bool "CUBIEBOARD"
+ depends on MACH_SUN4I
+
+config TARGET_CUBIETRUCK
+ bool "CUBIETRUCK"
+ depends on MACH_SUN7I
+
+config TARGET_IPPO_Q8H_V5
+ bool "IPPO_Q8H_V5"
+ depends on MACH_SUN8I
+
+config TARGET_PCDUINO3
+ bool "PCDUINO3"
+ depends on MACH_SUN7I
+
+config TARGET_MELE_A1000G
+ bool "MELE_A1000G"
+ depends on MACH_SUN4I
+
+config TARGET_MELE_A1000
+ bool "MELE_A1000"
+ depends on MACH_SUN4I
+
+config TARGET_MELE_M3
+ bool "MELE_M3"
+ depends on MACH_SUN7I
+
+config TARGET_MINI_X_1GB
+ bool "MINI_X_1GB"
+ depends on MACH_SUN4I
+
+config TARGET_MINI_X
+ bool "MINI_X"
+ depends on MACH_SUN4I
+
+config TARGET_BA10_TV_BOX
+ bool "BA10_TV_BOX"
+ depends on MACH_SUN4I
+
+config TARGET_I12_TVBOX
+ bool "I12_TVBOX"
+ depends on MACH_SUN7I
+
+config TARGET_QT840A
+ bool "QT840A"
+ depends on MACH_SUN7I
+
+config TARGET_R7DONGLE
+ bool "R7DONGLE"
+ depends on MACH_SUN5I
+
+endchoice
config SYS_BOARD
default "sunxi"
config SYS_SOC
default "sunxi"
+config SPL_FEL
+ bool "SPL/FEL mode support"
+ depends on SPL
+ default n
+
config FDTFILE
string "Default fdtfile env setting for this board"
F: configs/Bananapi_defconfig
F: configs/i12-tvbox_defconfig
F: configs/Linksprite_pcDuino3_defconfig
+F: configs/Linksprite_pcDuino3_fdt_defconfig
F: configs/qt840a_defconfig
CUBIEBOARD2 BOARD
F: configs/Colombus_defconfig
IPPO-Q8H-V5 BOARD
-M: CHen-Yu Tsai <wens@csie.org>
+M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Ippo_q8h_v5_defconfig
obj-y += board.o
obj-$(CONFIG_SUNXI_GMAC) += gmac.o
obj-$(CONFIG_SUNXI_AHCI) += ahci.o
-obj-$(CONFIG_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o
-obj-$(CONFIG_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o
-obj-$(CONFIG_A13_OLINUXINO) += dram_a13_olinuxino.o
-obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o
-obj-$(CONFIG_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o
-obj-$(CONFIG_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o
-obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o
+obj-$(CONFIG_TARGET_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o
+obj-$(CONFIG_TARGET_A13_OLINUXINO) += dram_a13_olinuxino.o
+obj-$(CONFIG_TARGET_A13_OLINUXINOM) += dram_a13_oli_micro.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
# This is not a typo, uses the same mem settings as the a10s-olinuxino-m
-obj-$(CONFIG_AUXTEK_T004) += dram_a10s_olinuxino_m.o
-obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o
-obj-$(CONFIG_BANANAPI) += dram_bananapi.o
-obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o
-obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o
-obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o
-obj-$(CONFIG_I12_TVBOX) += dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_MELE_A1000) += dram_sun4i_360_512.o
-obj-$(CONFIG_MELE_A1000G) += dram_sun4i_360_1024_iow8.o
-obj-$(CONFIG_MELE_M3) += dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_MINI_X) += dram_sun4i_360_512.o
-obj-$(CONFIG_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o
-obj-$(CONFIG_PCDUINO3) += dram_linksprite_pcduino3.o
-obj-$(CONFIG_QT840A) += dram_sun7i_384_512_busw16_iow16.o
-obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o
+obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o
+obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o
+obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o
+obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o
+obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o
+obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o
+obj-$(CONFIG_TARGET_I12_TVBOX) += dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MELE_A1000) += dram_sun4i_360_512.o
+obj-$(CONFIG_TARGET_MELE_A1000G) += dram_sun4i_360_1024_iow8.o
+obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o
+obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o
+obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o
+obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o
+obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o
{
printf("SUNXI SCSI INIT\n");
#ifdef CONFIG_SATAPWR
+ gpio_request(CONFIG_SATAPWR, "satapwr");
gpio_direction_output(CONFIG_SATAPWR, 1);
#endif
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A10_OLINUXINO_L,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_A10_OLINUXINO_L=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
+S:CONFIG_MMC0_CD_PIN="PG1"
+S:CONFIG_MMC1_CD_PIN="PG13"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN5I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A10S_OLINUXINO_M=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINOM,CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN5I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A13_OLINUXINOM=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINO,CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN5I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A13_OLINUXINO=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_L2=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_L=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
+S:CONFIG_MMC0_CD_PIN="PH1"
+S:CONFIG_MMC3_CD_PIN="PH11"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_M=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AUXTEK_T004,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN5I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_AUXTEK_T004=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BANANAPI,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-bananapi.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_BANANAPI=y
-CONFIG_SYS_EXTRA_OPTIONS="COLOMBUS"
CONFIG_ARM=y
-CONFIG_TARGET_SUN6I=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_TARGET_COLOMBUS=y
CONFIG_FDTFILE="sun6i-a31-colombus.dtb"
+++ /dev/null
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_CUBIEBOARD2=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_CUBIEBOARD=y
+++ /dev/null
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_CUBIETRUCK=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="IPPO_Q8H_V5,CONS_INDEX=5"
-CONFIG_ARM=y
-CONFIG_TARGET_SUN8I=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I=y
+CONFIG_TARGET_IPPO_Q8H_V5=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="PCDUINO3,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_PCDUINO3=y
--- /dev/null
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
+CONFIG_DM=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_PCDUINO3=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000G,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MELE_A1000G=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MELE_A1000=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-m3.dtb"
+S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+S:CONFIG_MMC0_CD_PIN="PH1"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_MELE_M3=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MINI_X_1GB,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MINI_X_1GB=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MINI_X,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MINI_X=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BA10_TV_BOX,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN4I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_BA10_TV_BOX=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="I12_TVBOX,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_I12_TVBOX=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="QT840A,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN7I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_QT840A=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="R7DONGLE,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb"
+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_SUN5I=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_R7DONGLE=y
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
#include <asm/io.h>
#include <asm/gpio.h>
+#include <dm/device-internal.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SUNXI_GPIOS_PER_BANK SUNXI_GPIO_A_NR
+
+struct sunxi_gpio_platdata {
+ struct sunxi_gpio *regs;
+ const char *bank_name; /* Name of bank, e.g. "B" */
+ int gpio_count;
+};
+
+#ifndef CONFIG_DM_GPIO
static int sunxi_gpio_output(u32 pin, u32 val)
{
u32 dat;
return -1;
return group * 32 + pin;
}
+#endif
+
+#ifdef CONFIG_DM_GPIO
+static int sunxi_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+ struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
+
+ sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_INPUT);
+
+ return 0;
+}
+
+static int sunxi_gpio_direction_output(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
+ u32 num = GPIO_NUM(offset);
+
+ sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_OUTPUT);
+ clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0);
+
+ return 0;
+}
+
+static int sunxi_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+ struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
+ u32 num = GPIO_NUM(offset);
+ unsigned dat;
+
+ dat = readl(&plat->regs->dat);
+ dat >>= num;
+
+ return dat & 0x1;
+}
+
+static int sunxi_gpio_set_value(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
+ u32 num = GPIO_NUM(offset);
+
+ clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0);
+ return 0;
+}
+
+static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+ struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
+ int func;
+
+ func = sunxi_gpio_get_cfgbank(plat->regs, offset);
+ if (func == SUNXI_GPIO_OUTPUT)
+ return GPIOF_OUTPUT;
+ else if (func == SUNXI_GPIO_INPUT)
+ return GPIOF_INPUT;
+ else
+ return GPIOF_FUNC;
+}
+
+static const struct dm_gpio_ops gpio_sunxi_ops = {
+ .direction_input = sunxi_gpio_direction_input,
+ .direction_output = sunxi_gpio_direction_output,
+ .get_value = sunxi_gpio_get_value,
+ .set_value = sunxi_gpio_set_value,
+ .get_function = sunxi_gpio_get_function,
+};
+
+/**
+ * Returns the name of a GPIO bank
+ *
+ * GPIO banks are named A, B, C, ...
+ *
+ * @bank: Bank number (0, 1..n-1)
+ * @return allocated string containing the name
+ */
+static char *gpio_bank_name(int bank)
+{
+ char *name;
+
+ name = malloc(2);
+ if (name) {
+ name[0] = 'A' + bank;
+ name[1] = '\0';
+ }
+
+ return name;
+}
+
+static int gpio_sunxi_probe(struct udevice *dev)
+{
+ struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+
+ /* Tell the uclass how many GPIOs we have */
+ if (plat) {
+ uc_priv->gpio_count = plat->gpio_count;
+ uc_priv->bank_name = plat->bank_name;
+ }
+
+ return 0;
+}
+/**
+ * We have a top-level GPIO device with no actual GPIOs. It has a child
+ * device for each Sunxi bank.
+ */
+static int gpio_sunxi_bind(struct udevice *parent)
+{
+ struct sunxi_gpio_platdata *plat = parent->platdata;
+ struct sunxi_gpio_reg *ctlr;
+ int bank;
+ int ret;
+
+ /* If this is a child device, there is nothing to do here */
+ if (plat)
+ return 0;
+
+ ctlr = (struct sunxi_gpio_reg *)fdtdec_get_addr(gd->fdt_blob,
+ parent->of_offset, "reg");
+ for (bank = 0; bank < SUNXI_GPIO_BANKS; bank++) {
+ struct sunxi_gpio_platdata *plat;
+ struct udevice *dev;
+
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+ plat->regs = &ctlr->gpio_bank[bank];
+ plat->bank_name = gpio_bank_name(bank);
+ plat->gpio_count = SUNXI_GPIOS_PER_BANK;
+
+ ret = device_bind(parent, parent->driver,
+ plat->bank_name, plat, -1, &dev);
+ if (ret)
+ return ret;
+ dev->of_offset = parent->of_offset;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id sunxi_gpio_ids[] = {
+ { .compatible = "allwinner,sun7i-a20-pinctrl" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_sunxi) = {
+ .name = "gpio_sunxi",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_sunxi_ops,
+ .of_match = sunxi_gpio_ids,
+ .bind = gpio_sunxi_bind,
+ .probe = gpio_sunxi_probe,
+};
+#endif
/* support 4 mmc hosts */
struct sunxi_mmc_host mmc_host[4];
+static int sunxi_mmc_getcd_gpio(int sdc_no)
+{
+ switch (sdc_no) {
+ case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
+ case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
+ case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
+ case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
+ }
+ return -1;
+}
+
static int mmc_resource_init(int sdc_no)
{
struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ int cd_pin, ret = 0;
debug("init mmc %d resource\n", sdc_no);
}
mmchost->mmc_no = sdc_no;
- return 0;
+ cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
+ if (cd_pin != -1)
+ ret = gpio_request(cd_pin, "mmc_cd");
+
+ return ret;
}
static int mmc_clk_io_on(int sdc_no)
/* config ahb clock */
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
-#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
/* unassert reset */
setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
#endif
static int sunxi_mmc_getcd(struct mmc *mmc)
{
struct sunxi_mmc_host *mmchost = mmc->priv;
- int cd_pin = -1;
-
- switch (mmchost->mmc_no) {
- case 0: cd_pin = sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); break;
- case 1: cd_pin = sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); break;
- case 2: cd_pin = sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); break;
- case 3: cd_pin = sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); break;
- }
+ int cd_pin;
+ cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
if (cd_pin == -1)
return 1;
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I) || defined(CONFIG_SUN8I)
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || defined(CONFIG_MACH_SUN8I)
cfg->host_caps |= MMC_MODE_HC;
#endif
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
cfg->f_min = 400000;
cfg->f_max = 52000000;
- mmc_resource_init(sdc_no);
+ if (mmc_resource_init(sdc_no) != 0)
+ return NULL;
+
mmc_clk_io_on(sdc_no);
return mmc_create(cfg, &mmc_host[sdc_no]);
obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
obj-$(CONFIG_ARM_DCC) += arm_dcc.o
obj-$(CONFIG_ATMEL_USART) += atmel_usart.o
+obj-$(CONFIG_DW_SERIAL) += serial_dw.o
obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
obj-$(CONFIG_MCFUART) += mcfuart.o
obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
--- /dev/null
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ns16550.h>
+#include <serial.h>
+
+static const struct udevice_id dw_serial_ids[] = {
+ { .compatible = "snps,dw-apb-uart" },
+ { }
+};
+
+static int dw_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ns16550_platdata *plat = dev_get_platdata(dev);
+ int ret;
+
+ ret = ns16550_serial_ofdata_to_platdata(dev);
+ if (ret)
+ return ret;
+ plat->clock = CONFIG_SYS_NS16550_CLK;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(serial_ns16550) = {
+ .name = "serial_dw",
+ .id = UCLASS_SERIAL,
+ .of_match = dw_serial_ids,
+ .ofdata_to_platdata = dw_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+ .priv_auto_alloc_size = sizeof(struct NS16550),
+ .probe = ns16550_serial_probe,
+ .ops = &ns16550_serial_ops,
+};
usb_phy_write(sunxi_ehci, 0x20, 0x14, 5);
/* threshold adjustment disconnect */
-#ifdef CONFIG_SUN4I
+#ifdef CONFIG_MACH_SUN4I
usb_phy_write(sunxi_ehci, 0x2a, 3, 2);
#else
usb_phy_write(sunxi_ehci, 0x2a, 2, 2);
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+ int err;
/* enable common PHY only once */
if (index == 0)
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+ err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
+ if (err)
+ return err;
+
sunxi_ehci_enable(sunxi_ehci);
*hccr = get_io_base(sunxi_ehci->id);
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+ int err;
sunxi_ehci_disable(sunxi_ehci);
+ err = gpio_free(sunxi_ehci->gpio_vbus);
+ if (err)
+ return err;
+
/* disable common PHY only once, for the last enabled hcd */
if (enabled_hcd_count == 1)
clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
/*
* A10 specific configuration
*/
-#define CONFIG_SUN4I /* sun4i SoC generation */
#define CONFIG_CLK_FULL_SPEED 1008000000
#define CONFIG_SYS_PROMPT "sun4i# "
/*
* High Level Configuration Options
*/
-#define CONFIG_SUN5I /* sun5i SoC generation */
#define CONFIG_CLK_FULL_SPEED 1008000000
#define CONFIG_SYS_PROMPT "sun5i# "
/*
* A31 specific configuration
*/
-#define CONFIG_SUN6I /* sun6i SoC generation */
#define CONFIG_SYS_PROMPT "sun6i# "
/*
* A20 specific configuration
*/
-#define CONFIG_SUN7I /* sun7i SoC generation */
#define CONFIG_CLK_FULL_SPEED 912000000
#define CONFIG_SYS_PROMPT "sun7i# "
/*
* A23 specific configuration
*/
-#define CONFIG_SUN8I /* sun8i SoC generation */
#define CONFIG_SYS_PROMPT "sun8i# "
/*
#define CONFIG_SYS_TEXT_BASE 0x4a000000
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
+# define CONFIG_CMD_DM
+# define CONFIG_DM_GPIO
+# define CONFIG_DM_SERIAL
+# define CONFIG_DW_SERIAL
+# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#endif
+
/*
* Display CPU information
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
-#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK 24000000
-#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
-#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
-#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
-#define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
+#ifndef CONFIG_DM_SERIAL
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
+# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
+# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
+# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
+#endif
/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
--- /dev/null
+/*
+ * This header provides constants for most input bindings.
+ *
+ * Most input bindings include key code, matrix key code format.
+ * In most cases, key code and matrix key code format uses
+ * the standard values/macro defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INPUT_INPUT_H
+#define _DT_BINDINGS_INPUT_INPUT_H
+
+#define KEY_RESERVED 0
+#define KEY_ESC 1
+#define KEY_1 2
+#define KEY_2 3
+#define KEY_3 4
+#define KEY_4 5
+#define KEY_5 6
+#define KEY_6 7
+#define KEY_7 8
+#define KEY_8 9
+#define KEY_9 10
+#define KEY_0 11
+#define KEY_MINUS 12
+#define KEY_EQUAL 13
+#define KEY_BACKSPACE 14
+#define KEY_TAB 15
+#define KEY_Q 16
+#define KEY_W 17
+#define KEY_E 18
+#define KEY_R 19
+#define KEY_T 20
+#define KEY_Y 21
+#define KEY_U 22
+#define KEY_I 23
+#define KEY_O 24
+#define KEY_P 25
+#define KEY_LEFTBRACE 26
+#define KEY_RIGHTBRACE 27
+#define KEY_ENTER 28
+#define KEY_LEFTCTRL 29
+#define KEY_A 30
+#define KEY_S 31
+#define KEY_D 32
+#define KEY_F 33
+#define KEY_G 34
+#define KEY_H 35
+#define KEY_J 36
+#define KEY_K 37
+#define KEY_L 38
+#define KEY_SEMICOLON 39
+#define KEY_APOSTROPHE 40
+#define KEY_GRAVE 41
+#define KEY_LEFTSHIFT 42
+#define KEY_BACKSLASH 43
+#define KEY_Z 44
+#define KEY_X 45
+#define KEY_C 46
+#define KEY_V 47
+#define KEY_B 48
+#define KEY_N 49
+#define KEY_M 50
+#define KEY_COMMA 51
+#define KEY_DOT 52
+#define KEY_SLASH 53
+#define KEY_RIGHTSHIFT 54
+#define KEY_KPASTERISK 55
+#define KEY_LEFTALT 56
+#define KEY_SPACE 57
+#define KEY_CAPSLOCK 58
+#define KEY_F1 59
+#define KEY_F2 60
+#define KEY_F3 61
+#define KEY_F4 62
+#define KEY_F5 63
+#define KEY_F6 64
+#define KEY_F7 65
+#define KEY_F8 66
+#define KEY_F9 67
+#define KEY_F10 68
+#define KEY_NUMLOCK 69
+#define KEY_SCROLLLOCK 70
+#define KEY_KP7 71
+#define KEY_KP8 72
+#define KEY_KP9 73
+#define KEY_KPMINUS 74
+#define KEY_KP4 75
+#define KEY_KP5 76
+#define KEY_KP6 77
+#define KEY_KPPLUS 78
+#define KEY_KP1 79
+#define KEY_KP2 80
+#define KEY_KP3 81
+#define KEY_KP0 82
+#define KEY_KPDOT 83
+
+#define KEY_ZENKAKUHANKAKU 85
+#define KEY_102ND 86
+#define KEY_F11 87
+#define KEY_F12 88
+#define KEY_RO 89
+#define KEY_KATAKANA 90
+#define KEY_HIRAGANA 91
+#define KEY_HENKAN 92
+#define KEY_KATAKANAHIRAGANA 93
+#define KEY_MUHENKAN 94
+#define KEY_KPJPCOMMA 95
+#define KEY_KPENTER 96
+#define KEY_RIGHTCTRL 97
+#define KEY_KPSLASH 98
+#define KEY_SYSRQ 99
+#define KEY_RIGHTALT 100
+#define KEY_LINEFEED 101
+#define KEY_HOME 102
+#define KEY_UP 103
+#define KEY_PAGEUP 104
+#define KEY_LEFT 105
+#define KEY_RIGHT 106
+#define KEY_END 107
+#define KEY_DOWN 108
+#define KEY_PAGEDOWN 109
+#define KEY_INSERT 110
+#define KEY_DELETE 111
+#define KEY_MACRO 112
+#define KEY_MUTE 113
+#define KEY_VOLUMEDOWN 114
+#define KEY_VOLUMEUP 115
+#define KEY_POWER 116 /* SC System Power Down */
+#define KEY_KPEQUAL 117
+#define KEY_KPPLUSMINUS 118
+#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA 121
+#define KEY_HANGEUL 122
+#define KEY_HANGUEL KEY_HANGEUL
+#define KEY_HANJA 123
+#define KEY_YEN 124
+#define KEY_LEFTMETA 125
+#define KEY_RIGHTMETA 126
+#define KEY_COMPOSE 127
+
+#define KEY_STOP 128 /* AC Stop */
+#define KEY_AGAIN 129
+#define KEY_PROPS 130 /* AC Properties */
+#define KEY_UNDO 131 /* AC Undo */
+#define KEY_FRONT 132
+#define KEY_COPY 133 /* AC Copy */
+#define KEY_OPEN 134 /* AC Open */
+#define KEY_PASTE 135 /* AC Paste */
+#define KEY_FIND 136 /* AC Search */
+#define KEY_CUT 137 /* AC Cut */
+#define KEY_HELP 138 /* AL Integrated Help Center */
+#define KEY_MENU 139 /* Menu (show menu) */
+#define KEY_CALC 140 /* AL Calculator */
+#define KEY_SETUP 141
+#define KEY_SLEEP 142 /* SC System Sleep */
+#define KEY_WAKEUP 143 /* System Wake Up */
+#define KEY_FILE 144 /* AL Local Machine Browser */
+#define KEY_SENDFILE 145
+#define KEY_DELETEFILE 146
+#define KEY_XFER 147
+#define KEY_PROG1 148
+#define KEY_PROG2 149
+#define KEY_WWW 150 /* AL Internet Browser */
+#define KEY_MSDOS 151
+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK KEY_COFFEE
+#define KEY_DIRECTION 153
+#define KEY_CYCLEWINDOWS 154
+#define KEY_MAIL 155
+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
+#define KEY_COMPUTER 157
+#define KEY_BACK 158 /* AC Back */
+#define KEY_FORWARD 159 /* AC Forward */
+#define KEY_CLOSECD 160
+#define KEY_EJECTCD 161
+#define KEY_EJECTCLOSECD 162
+#define KEY_NEXTSONG 163
+#define KEY_PLAYPAUSE 164
+#define KEY_PREVIOUSSONG 165
+#define KEY_STOPCD 166
+#define KEY_RECORD 167
+#define KEY_REWIND 168
+#define KEY_PHONE 169 /* Media Select Telephone */
+#define KEY_ISO 170
+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE 172 /* AC Home */
+#define KEY_REFRESH 173 /* AC Refresh */
+#define KEY_EXIT 174 /* AC Exit */
+#define KEY_MOVE 175
+#define KEY_EDIT 176
+#define KEY_SCROLLUP 177
+#define KEY_SCROLLDOWN 178
+#define KEY_KPLEFTPAREN 179
+#define KEY_KPRIGHTPAREN 180
+#define KEY_NEW 181 /* AC New */
+#define KEY_REDO 182 /* AC Redo/Repeat */
+
+#define KEY_F13 183
+#define KEY_F14 184
+#define KEY_F15 185
+#define KEY_F16 186
+#define KEY_F17 187
+#define KEY_F18 188
+#define KEY_F19 189
+#define KEY_F20 190
+#define KEY_F21 191
+#define KEY_F22 192
+#define KEY_F23 193
+#define KEY_F24 194
+
+#define KEY_PLAYCD 200
+#define KEY_PAUSECD 201
+#define KEY_PROG3 202
+#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_SUSPEND 205
+#define KEY_CLOSE 206 /* AC Close */
+#define KEY_PLAY 207
+#define KEY_FASTFORWARD 208
+#define KEY_BASSBOOST 209
+#define KEY_PRINT 210 /* AC Print */
+#define KEY_HP 211
+#define KEY_CAMERA 212
+#define KEY_SOUND 213
+#define KEY_QUESTION 214
+#define KEY_EMAIL 215
+#define KEY_CHAT 216
+#define KEY_SEARCH 217
+#define KEY_CONNECT 218
+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
+#define KEY_SPORT 220
+#define KEY_SHOP 221
+#define KEY_ALTERASE 222
+#define KEY_CANCEL 223 /* AC Cancel */
+#define KEY_BRIGHTNESSDOWN 224
+#define KEY_BRIGHTNESSUP 225
+#define KEY_MEDIA 226
+
+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+ outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE 228
+#define KEY_KBDILLUMDOWN 229
+#define KEY_KBDILLUMUP 230
+
+#define KEY_SEND 231 /* AC Send */
+#define KEY_REPLY 232 /* AC Reply */
+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+#define KEY_SAVE 234 /* AC Save */
+#define KEY_DOCUMENTS 235
+
+#define KEY_BATTERY 236
+
+#define KEY_BLUETOOTH 237
+#define KEY_WLAN 238
+#define KEY_UWB 239
+
+#define KEY_UNKNOWN 240
+
+#define KEY_VIDEO_NEXT 241 /* drive next video source */
+#define KEY_VIDEO_PREV 242 /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
+#define KEY_DISPLAY_OFF 245 /* display device to off state */
+
+#define KEY_WIMAX 246
+#define KEY_RFKILL 247 /* Key that controls all radios */
+
+#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC 0x100
+#define BTN_0 0x100
+#define BTN_1 0x101
+#define BTN_2 0x102
+#define BTN_3 0x103
+#define BTN_4 0x104
+#define BTN_5 0x105
+#define BTN_6 0x106
+#define BTN_7 0x107
+#define BTN_8 0x108
+#define BTN_9 0x109
+
+#define BTN_MOUSE 0x110
+#define BTN_LEFT 0x110
+#define BTN_RIGHT 0x111
+#define BTN_MIDDLE 0x112
+#define BTN_SIDE 0x113
+#define BTN_EXTRA 0x114
+#define BTN_FORWARD 0x115
+#define BTN_BACK 0x116
+#define BTN_TASK 0x117
+
+#define BTN_JOYSTICK 0x120
+#define BTN_TRIGGER 0x120
+#define BTN_THUMB 0x121
+#define BTN_THUMB2 0x122
+#define BTN_TOP 0x123
+#define BTN_TOP2 0x124
+#define BTN_PINKIE 0x125
+#define BTN_BASE 0x126
+#define BTN_BASE2 0x127
+#define BTN_BASE3 0x128
+#define BTN_BASE4 0x129
+#define BTN_BASE5 0x12a
+#define BTN_BASE6 0x12b
+#define BTN_DEAD 0x12f
+
+#define BTN_GAMEPAD 0x130
+#define BTN_SOUTH 0x130
+#define BTN_A BTN_SOUTH
+#define BTN_EAST 0x131
+#define BTN_B BTN_EAST
+#define BTN_C 0x132
+#define BTN_NORTH 0x133
+#define BTN_X BTN_NORTH
+#define BTN_WEST 0x134
+#define BTN_Y BTN_WEST
+#define BTN_Z 0x135
+#define BTN_TL 0x136
+#define BTN_TR 0x137
+#define BTN_TL2 0x138
+#define BTN_TR2 0x139
+#define BTN_SELECT 0x13a
+#define BTN_START 0x13b
+#define BTN_MODE 0x13c
+#define BTN_THUMBL 0x13d
+#define BTN_THUMBR 0x13e
+
+#define BTN_DIGI 0x140
+#define BTN_TOOL_PEN 0x140
+#define BTN_TOOL_RUBBER 0x141
+#define BTN_TOOL_BRUSH 0x142
+#define BTN_TOOL_PENCIL 0x143
+#define BTN_TOOL_AIRBRUSH 0x144
+#define BTN_TOOL_FINGER 0x145
+#define BTN_TOOL_MOUSE 0x146
+#define BTN_TOOL_LENS 0x147
+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
+#define BTN_TOUCH 0x14a
+#define BTN_STYLUS 0x14b
+#define BTN_STYLUS2 0x14c
+#define BTN_TOOL_DOUBLETAP 0x14d
+#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
+
+#define BTN_WHEEL 0x150
+#define BTN_GEAR_DOWN 0x150
+#define BTN_GEAR_UP 0x151
+
+#define KEY_OK 0x160
+#define KEY_SELECT 0x161
+#define KEY_GOTO 0x162
+#define KEY_CLEAR 0x163
+#define KEY_POWER2 0x164
+#define KEY_OPTION 0x165
+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME 0x167
+#define KEY_VENDOR 0x168
+#define KEY_ARCHIVE 0x169
+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
+#define KEY_CHANNEL 0x16b
+#define KEY_FAVORITES 0x16c
+#define KEY_EPG 0x16d
+#define KEY_PVR 0x16e /* Media Select Home */
+#define KEY_MHP 0x16f
+#define KEY_LANGUAGE 0x170
+#define KEY_TITLE 0x171
+#define KEY_SUBTITLE 0x172
+#define KEY_ANGLE 0x173
+#define KEY_ZOOM 0x174
+#define KEY_MODE 0x175
+#define KEY_KEYBOARD 0x176
+#define KEY_SCREEN 0x177
+#define KEY_PC 0x178 /* Media Select Computer */
+#define KEY_TV 0x179 /* Media Select TV */
+#define KEY_TV2 0x17a /* Media Select Cable */
+#define KEY_VCR 0x17b /* Media Select VCR */
+#define KEY_VCR2 0x17c /* VCR Plus */
+#define KEY_SAT 0x17d /* Media Select Satellite */
+#define KEY_SAT2 0x17e
+#define KEY_CD 0x17f /* Media Select CD */
+#define KEY_TAPE 0x180 /* Media Select Tape */
+#define KEY_RADIO 0x181
+#define KEY_TUNER 0x182 /* Media Select Tuner */
+#define KEY_PLAYER 0x183
+#define KEY_TEXT 0x184
+#define KEY_DVD 0x185 /* Media Select DVD */
+#define KEY_AUX 0x186
+#define KEY_MP3 0x187
+#define KEY_AUDIO 0x188 /* AL Audio Browser */
+#define KEY_VIDEO 0x189 /* AL Movie Browser */
+#define KEY_DIRECTORY 0x18a
+#define KEY_LIST 0x18b
+#define KEY_MEMO 0x18c /* Media Select Messages */
+#define KEY_CALENDAR 0x18d
+#define KEY_RED 0x18e
+#define KEY_GREEN 0x18f
+#define KEY_YELLOW 0x190
+#define KEY_BLUE 0x191
+#define KEY_CHANNELUP 0x192 /* Channel Increment */
+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
+#define KEY_FIRST 0x194
+#define KEY_LAST 0x195 /* Recall Last */
+#define KEY_AB 0x196
+#define KEY_NEXT 0x197
+#define KEY_RESTART 0x198
+#define KEY_SLOW 0x199
+#define KEY_SHUFFLE 0x19a
+#define KEY_BREAK 0x19b
+#define KEY_PREVIOUS 0x19c
+#define KEY_DIGITS 0x19d
+#define KEY_TEEN 0x19e
+#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+#define KEY_GAMES 0x1a1 /* Media Select Games */
+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+#define KEY_DATABASE 0x1aa /* AL Database App */
+#define KEY_NEWS 0x1ab /* AL Newsreader */
+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
+#define KEY_IMAGES 0x1ba /* AL Image Browser */
+
+#define KEY_DEL_EOL 0x1c0
+#define KEY_DEL_EOS 0x1c1
+#define KEY_INS_LINE 0x1c2
+#define KEY_DEL_LINE 0x1c3
+
+#define KEY_FN 0x1d0
+#define KEY_FN_ESC 0x1d1
+#define KEY_FN_F1 0x1d2
+#define KEY_FN_F2 0x1d3
+#define KEY_FN_F3 0x1d4
+#define KEY_FN_F4 0x1d5
+#define KEY_FN_F5 0x1d6
+#define KEY_FN_F6 0x1d7
+#define KEY_FN_F7 0x1d8
+#define KEY_FN_F8 0x1d9
+#define KEY_FN_F9 0x1da
+#define KEY_FN_F10 0x1db
+#define KEY_FN_F11 0x1dc
+#define KEY_FN_F12 0x1dd
+#define KEY_FN_1 0x1de
+#define KEY_FN_2 0x1df
+#define KEY_FN_D 0x1e0
+#define KEY_FN_E 0x1e1
+#define KEY_FN_F 0x1e2
+#define KEY_FN_S 0x1e3
+#define KEY_FN_B 0x1e4
+
+#define KEY_BRL_DOT1 0x1f1
+#define KEY_BRL_DOT2 0x1f2
+#define KEY_BRL_DOT3 0x1f3
+#define KEY_BRL_DOT4 0x1f4
+#define KEY_BRL_DOT5 0x1f5
+#define KEY_BRL_DOT6 0x1f6
+#define KEY_BRL_DOT7 0x1f7
+#define KEY_BRL_DOT8 0x1f8
+#define KEY_BRL_DOT9 0x1f9
+#define KEY_BRL_DOT10 0x1fa
+
+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+#define KEY_NUMERIC_1 0x201 /* and other keypads */
+#define KEY_NUMERIC_2 0x202
+#define KEY_NUMERIC_3 0x203
+#define KEY_NUMERIC_4 0x204
+#define KEY_NUMERIC_5 0x205
+#define KEY_NUMERIC_6 0x206
+#define KEY_NUMERIC_7 0x207
+#define KEY_NUMERIC_8 0x208
+#define KEY_NUMERIC_9 0x209
+#define KEY_NUMERIC_STAR 0x20a
+#define KEY_NUMERIC_POUND 0x20b
+
+#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
+#define KEY_CAMERA_ZOOMIN 0x215
+#define KEY_CAMERA_ZOOMOUT 0x216
+#define KEY_CAMERA_UP 0x217
+#define KEY_CAMERA_DOWN 0x218
+#define KEY_CAMERA_LEFT 0x219
+#define KEY_CAMERA_RIGHT 0x21a
+
+#define KEY_ATTENDANT_ON 0x21b
+#define KEY_ATTENDANT_OFF 0x21c
+#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
+#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
+
+#define BTN_DPAD_UP 0x220
+#define BTN_DPAD_DOWN 0x221
+#define BTN_DPAD_LEFT 0x222
+#define BTN_DPAD_RIGHT 0x223
+
+#define MATRIX_KEY(row, col, code) \
+ ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
+
+#endif /* _DT_BINDINGS_INPUT_INPUT_H */
fi
}
+do_board_felconfig () {
+ do_board_defconfig ${1%%_felconfig}_defconfig
+ if ! grep -q CONFIG_ARCH_SUNXI=y .config || ! grep -q CONFIG_SPL=y .config ; then
+ echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2
+ exit 1
+ fi
+ sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y/g' \
+ .config spl/.config
+}
+
do_savedefconfig () {
if [ -r "$KCONFIG_CONFIG" ]; then
subimages=$(get_enabled_subimages)
case $target in
*_defconfig)
do_board_defconfig $target;;
+*_felconfig)
+ do_board_felconfig $target;;
*_config)
# backward compatibility
do_board_defconfig ${target%_config}_defconfig;;
projects / platform / kernel / u-boot.git / commitdiff