configs: tizen_starfive_visionfive2: Enable environment configs

Enable environment configs to use uboot.env file in FAT filesystem.

Change-Id: I9f6877ec810eed31ebfb9b65e71318a868cc31b7
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/configs/tizen_starfive_visionfive2_defconfig b/configs/tizen_starfive_visionfive2_defconfig
index 550d0ff..562ca16 100644 (file)
--- a/configs/tizen_starfive_visionfive2_defconfig
+++ b/configs/tizen_starfive_visionfive2_defconfig
@@ -3,15 +3,12 @@ CONFIG_SYS_MALLOC_LEN=0x800000
 CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
+CONFIG_ENV_SIZE=0x4000
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b"
 CONFIG_SPL_TEXT_BASE=0x8000000
 CONFIG_SYS_PROMPT="StarFive #"
-CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
-CONFIG_SPL_STACK=0x8180000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
@@ -22,6 +19,8 @@ CONFIG_ARCH_RV64I=y
 CONFIG_CMODEL_MEDANY=y
 CONFIG_RISCV_SMODE=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
 CONFIG_FIT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -37,6 +36,7 @@ CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_BSS_START_ADDR=0x8040000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x8180000
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80000000
@@ -51,7 +51,10 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="1:3"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_JH7110=y
@@ -73,6 +76,7 @@ CONFIG_SPL_PINCTRL_STARFIVE=y
 CONFIG_SPL_PINCTRL_STARFIVE_JH7110=y
 CONFIG_PINCTRL_STARFIVE=y
 # CONFIG_RAM_SIFIVE is not set
+CONFIG_DM_RESET=y
 CONFIG_SYS_NS16550=y
 CONFIG_CADENCE_QSPI=y
 CONFIG_TIMER_EARLY=y