configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

Now that EHCD does not use CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS,
remove it in all boards' config files.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>

diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h
index 5a53e40..9dbb2c4 100644 (file)
--- a/arch/arm/include/asm/ehci-omap.h
+++ b/arch/arm/include/asm/ehci-omap.h
@@ -19,11 +19,7 @@ enum usbhs_omap_port_mode {
        OMAP_EHCI_PORT_MODE_HSIC,
 };
 
-#ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
-#define OMAP_HS_USB_PORTS      CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
-#else
 #define OMAP_HS_USB_PORTS      3
-#endif
 
 #define is_ehci_phy_mode(x)    ((x) == OMAP_EHCI_PORT_MODE_PHY)
 #define is_ehci_tll_mode(x)    ((x) == OMAP_EHCI_PORT_MODE_TLL)

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 0a2bcb2..32c5932 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -560,7 +560,6 @@
 #define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE                 0
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
 #endif
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */

diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 69706d2..8a4c333 100644 (file)
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -56,7 +56,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO       76 /* HSIC2 HUB #RESET */

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index ed1a228..0150727 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -94,9 +94,6 @@
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 

diff --git a/include/configs/duovero.h b/include/configs/duovero.h
index 8efcc94..c4496a7 100644 (file)
--- a/include/configs/duovero.h
+++ b/include/configs/duovero.h
@@ -25,8 +25,6 @@
 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
 
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
 

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 7cb3278..3b73bbc 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -134,8 +134,6 @@
 /* Enable Time Command */
 
 /* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_SMSC95XX

diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index 2744efb..7c28a94 100644 (file)
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -96,7 +96,6 @@
  * USB
  */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
 
 /* USB device */
 #define CONFIG_USB_ETHER

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 73fdfbd..3f5fdab 100644 (file)
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -74,7 +74,6 @@
 
 /* EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       57
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define        CONFIG_USB_HOST_ETHER
 #define        CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830

diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index feb8112..1307d21 100644 (file)
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -93,12 +93,7 @@
 #define CONFIG_NET_RETRY_COUNT 50
 #define CONFIG_PHY_MARVELL
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
-/* USB 3.0 */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-                                        3)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
 #define CONFIG_USB_HOST_ETHER

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index da66d64..86ae19c 100644 (file)
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -97,12 +97,7 @@
 #define CONFIG_ARP_TIMEOUT     200
 #define CONFIG_NET_RETRY_COUNT 50
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
-/* USB 3.0 */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-                                        3)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
 #define CONFIG_USB_HOST_ETHER

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 9ae3d18..8338d6d 100644 (file)
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -195,7 +195,6 @@
 #define CONFIG_SYS_NAND_LARGEPAGE
 
 /* EHCI driver */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     1
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_MXC

diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 9552c96..563854d 100644 (file)
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -184,7 +184,6 @@
 /* USB */
 #define CONFIG_USB_EHCI_EXYNOS
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 4422d5e..2fc6693 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -58,7 +58,6 @@
 
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       147
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 834822d..133069a 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -41,7 +41,6 @@
 
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       183
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
 
 /* commands to include */
 

diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index a973ce6..9951980 100644 (file)
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -17,8 +17,6 @@
  */
 
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
 

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index eb5e6df..9b65009 100644 (file)
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -51,7 +51,6 @@
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 88f841d..a14739f 100644 (file)
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -97,9 +97,6 @@
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
 
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE

diff --git a/include/configs/poplar.h b/include/configs/poplar.h
index d59f32a..d2ecd0d 100644 (file)
--- a/include/configs/poplar.h
+++ b/include/configs/poplar.h
@@ -30,7 +30,6 @@
 #define CONFIG_PL01X_SERIAL
 
 /* USB configuration */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                2
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_USB_HOST_ETHER

diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index b25be97..401f198 100644 (file)
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -65,10 +65,6 @@
 /* USB */
 #define CONFIG_CMD_USB
 
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#endif
-
 /* USB device */
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED

diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index 2c5f264..47dd991 100644 (file)
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -60,9 +60,6 @@
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-
 /* MMC */
 #define CONFIG_GENERIC_ATMEL_MCI
 

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index fefd58f..681c91c 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -310,7 +310,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_OHCI_SUNXI
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 #endif
 
 #ifdef CONFIG_USB_MUSB_SUNXI

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a9991fc..fb173eb 100644 (file)
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -67,7 +67,6 @@
                                        115200}
 /* EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       25
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
 /* commands to include */
 #define CONFIG_CMD_NAND                /* NAND support                 */

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 38f5bd0..08134f4 100644 (file)
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -228,7 +228,6 @@
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       162
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 

diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 107a0f8..75d2065 100644 (file)
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -63,6 +63,5 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH  0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA114_COMMON_H_ */

diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 8cf9bac..0d61753 100644 (file)
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -65,7 +65,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH  0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 /* GPU needs setup */
 #define CONFIG_TEGRA_GPU

diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index db1cc24..342ffbe 100644 (file)
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -82,7 +82,6 @@
  */
 #define CONFIG_USB_EHCI_TXFIFO_THRESH  10
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #define CONFIG_SYS_NAND_SELF_INIT
 #define CONFIG_SYS_NAND_ONFI_DETECTION

diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h
index 874fe34..4c05576 100644 (file)
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -68,7 +68,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH  0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 /* GPU needs setup */
 #define CONFIG_TEGRA_GPU

diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 6083847..c2096fb 100644 (file)
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -64,6 +64,5 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH  0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA30_COMMON_H_ */

diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index dc35b28..adff1b6 100644 (file)
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -63,12 +63,6 @@
 
 #endif
 
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#endif
-
 /* USB device */
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS

diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 1be6974..aa1e505 100644 (file)
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -128,7 +128,6 @@
  * USB configuration
  */
 #define CONFIG_USB_EHCI_PCI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     12
 #define CONFIG_SYS_USB_EVENT_POLL
 
 #define CONFIG_USB_HOST_ETHER

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 6312863..8f921c1 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4868,7 +4868,6 @@ CONFIG_SYS_UNSPEC_STRID
 CONFIG_SYS_USBCTRL
 CONFIG_SYS_USBD_BASE
 CONFIG_SYS_USB_EHCI_CPU_INIT
-CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
 CONFIG_SYS_USB_EHCI_REGS_BASE
 CONFIG_SYS_USB_FAT_BOOT_PARTITION
 CONFIG_SYS_USB_HOST