MPC5xxx: Change names of defines related to IPB and PCI clocks.

Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>

diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 7e65821..d744030 100644 (file)
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -156,21 +156,21 @@ void cpu_init_f (void)
        *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 15);
        *(vu_long *)(MPC5XXX_XLBARB + 0x70) = CFG_SDRAM_BASE | 0x1d;
 
-# if defined(CFG_IPBSPEED_133)
+# if defined(CFG_IPBCLK_EQUALS_XLBCLK)
        /* Motorola reports IPB should better run at 133 MHz. */
        *(vu_long *)MPC5XXX_ADDECR |= 1;
        /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
        addecr = *(vu_long *)MPC5XXX_CDM_CFG;
        addecr &= ~0x103;
-#  if defined(CFG_PCISPEED_66)
+#  if defined(CFG_PCICLK_EQUALS_IPBCLK_DIV2)
        /* pci_clk_sel = 0x01 -> IPB_CLK/2 */
        addecr |= 0x01;
 #  else
        /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
        addecr |= 0x02;
-#  endif /* CFG_PCISPEED_66 */
+#  endif /* CFG_PCICLK_EQUALS_IPBCLK_DIV2 */
        *(vu_long *)MPC5XXX_CDM_CFG = addecr;
-# endif        /* CFG_IPBSPEED_133 */
+# endif        /* CFG_IPBCLK_EQUALS_XLBCLK */
        /* Configure the XLB Arbiter */
        *(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff;
        *(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111;

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 5b54f30..bc30977 100644 (file)
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -282,17 +282,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet
- * hasn't been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#if defined(CFG_IPBSPEED_133)
-# define CFG_PCISPEED_66                       /* define for 66MHz speed */
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+# define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
 #endif
 
 /*
@@ -488,7 +488,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 # define CFG_BOOTCS_CFG                0x0008DF30      /* for pci_clk  = 66 MHz */
 #else
 # define CFG_BOOTCS_CFG                0x0004DF30      /* for pci_clk = 33 MHz  */

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 0d38254..09f8d20 100644 (file)
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -167,9 +167,9 @@
  * IPB Bus clocking configuration.
  */
 #if defined(CONFIG_LITE5200B)
-#define CFG_IPBSPEED_133       /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK       /* define for 133MHz speed */
 #else
-#undef CFG_IPBSPEED_133        /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK        /* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */
 

diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 9c241e6..7d91a01 100644 (file)
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -160,7 +160,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 /*
  * I2C configuration

diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 8a6e5a6..b42cfb6 100644 (file)
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -200,17 +200,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock 
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2          /* define for 66MHz speed */
 #endif
 
 /*
@@ -432,7 +432,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG         0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG         0x0004DF30 /* for pci_clk = 33 MHz */

diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index f41dbd0..1cc9ce9 100644 (file)
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -186,7 +186,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 
 /*
  * I2C configuration

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7069b35..7935593 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -269,17 +269,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
+ * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2  /* define for 66MHz speed */
 #endif
 
 /*
@@ -594,7 +594,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG         0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG         0x0004DF30 /* for pci_clk = 33 MHz */

diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 8175703..d8686dd 100644 (file)
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -183,7 +183,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 
 /*

diff --git a/include/configs/aev.h b/include/configs/aev.h
index 8d9f0a1..6c2a360 100644 (file)
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -166,17 +166,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock 
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2  /* define for 66MHz speed */
 #endif
 
 /*
@@ -362,7 +362,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG         0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG         0x0004DF30 /* for pci_clk = 33 MHz */

diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 2c160a4..ec6d57e 100644 (file)
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -111,7 +111,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 
 /*
  * Flash configuration, expect one 16 Megabyte Bank at most

diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index f9586fb..f5efcd9 100644 (file)
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -179,7 +179,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 /*
  * I2C configuration

diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index cfaf153..45a28c7 100644 (file)
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -110,7 +110,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 
 /*
  * I2C configuration

diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 773d5d2..ad3cf06 100644 (file)
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -147,7 +147,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
 /*
  * Flash configuration

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index f60973b..00d2e07 100644 (file)
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -169,7 +169,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
 /*
  * I2C configuration

diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 5c2b1cd..358c380 100644 (file)
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -160,9 +160,9 @@
 
 
 /*
- * Set IPB speed to 100MHz (yes, the #define is misnamed)
+ * Set IPB speed to 100MHz
  */
-#define CFG_IPBSPEED_133
+#define CFG_IPBCLK_EQUALS_XLBCLK
 
 
 /*

diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 5c05a74..63d0da7 100644 (file)
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -137,17 +137,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2  /* define for 66MHz speed */
 #endif
 #endif
 
@@ -276,7 +276,7 @@
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
 
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 /*
  * For 66 MHz PCI clock additional Wait State is needed for CS0 (flash).
  */

diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index fefdb3c..7151a9e 100644 (file)
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -171,7 +171,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 /*
  * I2C configuration

diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index e106b3b..185c2d4 100644 (file)
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -138,17 +138,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2  /* define for 66MHz speed */
 #endif
 
 /*
@@ -357,7 +357,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG         0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG         0x0004DF30 /* for pci_clk = 33 MHz */

diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index f40dde2..fd138a5 100644 (file)
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -219,17 +219,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock 
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2  /* define for 66MHz speed */
 #endif
 
 /*
@@ -444,7 +444,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG         0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG         0x0004DF30 /* for pci_clk = 33 MHz */

diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index 8cd8e9b..ff061ee 100644 (file)
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -114,7 +114,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
 /*
  * I2C configuration

diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index e19591d..0b7b19e 100644 (file)
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -167,7 +167,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                        /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                        /* define for 133MHz speed */
 #endif
 
 /*