--- /dev/null
+#!/bin/bash
+
+declare FORMAT=""
+declare DEVICE=""
+declare -i OLD_DD=0
+
+# Binaires array for fusing
+declare -a FUSING_BINARY_ARRAY
+declare -i FUSING_BINARY_NUM=0
+
+declare CONV_ASCII=""
+declare -i FUS_ENTRY_NUM=0
+declare -i ab_option=0
+
+# binary name | part number | bs | label | fs type
+declare -a PART_TABLE=(
+ "boot.img" 3 4M boot_a vfat
+ "rootfs.img" 5 4M rootfs_a ext4
+ "system-data.img" 6 4M system-data ext4
+ "user.img" 7 4M user ext4
+ "modules.img" 8 4M module_a ext4
+ "ramdisk.img" 9 4M ramdisk_a ext4
+ "ramdisk-recovery.img" 10 4M ramdisk-recovery_a ext4
+ "hal.img" 12 4M hal_a ext4
+ )
+
+declare -r -i PART_TABLE_COL=5
+declare -r -i PART_TABLE_ROW=${#PART_TABLE[*]}/${PART_TABLE_COL}
+
+# partition table support
+function get_index_use_name () {
+ local -r binary_name=$1
+
+ for ((idx=0;idx<$PART_TABLE_ROW;idx++)); do
+ if [ ${PART_TABLE[idx * ${PART_TABLE_COL} + 0]} == "$binary_name" ]; then
+ return $idx
+ fi
+ done
+
+ # return out of bound index
+ return $idx
+}
+
+function print_message () {
+ local color=$1
+ local message=$2
+
+ tput setaf $color
+ tput bold
+ echo ""
+ echo $message
+ tput sgr 0
+}
+
+function check_ddversion () {
+ # NOTE
+ # before coreutils dd 8.24, dd doesn't support "status=progress"
+ # and the option causes fusing failure. For backward compatibility,
+ # do not use the option for old dd
+ local version=(`dd --version | head -1 | grep -o '[0-9]\+'`)
+ local major=${version[0]}
+ local minor=${version[1]}
+
+ if [ $major -lt 8 ]; then
+ OLD_DD=1
+ elif [ $major -eq 8 -a $minor -lt 24 ]; then
+ OLD_DD=1
+ fi
+}
+
+function fusing_image () {
+ local -r fusing_img=$1
+
+ # get binary info using basename
+ get_index_use_name $(basename "$fusing_img")
+ local -r -i part_idx=$?
+
+ if [ $part_idx -ne $PART_TABLE_ROW ];then
+ local -r num=${PART_TABLE[${part_idx} * ${PART_TABLE_COL} + 1]}
+ if [ "${num}" == "" ]; then
+ local -r blktype=disk
+ else
+ local -r blktype=part
+ fi
+ local -r device=/dev/`lsblk ${DEVICE} -o TYPE,KNAME | awk "/^${blktype}.*[a-z]${num}\$/ { print \\\$2 }"`
+ local -r bs=${PART_TABLE[${part_idx} * ${PART_TABLE_COL} + 2]}
+ else
+ echo "Not supported binary: $fusing_img"
+ return
+ fi
+
+ local -r input_size=`du -b $fusing_img | awk '{print $1}'`
+ local -r input_size_mb=`expr $input_size / 1024 / 1024`
+
+ print_message 2 "[Fusing $1 ($input_size_mb MiB)]"
+ if [ "$blktype" == "part" ]; then
+ local MOUNT_PART=`mount | grep $device`
+ if [ "$MOUNT_PART" != "" ]; then
+ umount $device
+ fi
+ fi
+ if [ $OLD_DD == 1 ]; then
+ dd if=$fusing_img | pv -s $input_size | dd of=$device bs=$bs
+ else
+ dd if=$fusing_img of=$device bs=$bs status=progress oflag=direct
+ fi
+}
+
+function fuse_image_tarball () {
+ local -r filepath=$1
+ local -r temp_dir="tar_tmp"
+
+ mkdir -p $temp_dir
+ tar xvf $filepath -C $temp_dir
+ cd $temp_dir
+
+ for file in *
+ do
+ fusing_image $file
+ done
+
+ cd ..
+ rm -rf $temp_dir
+ eval sync
+}
+
+function fuse_image () {
+
+ if [ "$FUSING_BINARY_NUM" == 0 ]; then
+ return
+ fi
+
+ for ((fuse_idx = 0 ; fuse_idx < $FUSING_BINARY_NUM ; fuse_idx++))
+ do
+ local filename=${FUSING_BINARY_ARRAY[fuse_idx]}
+
+ case "$filename" in
+ *.tar | *.tar.gz)
+ fuse_image_tarball $filename
+ ;;
+ *)
+ fusing_image $filename
+ ;;
+ esac
+ done
+ echo ""
+}
+
+# partition format
+function mkpart_3 () {
+ # NOTE: if your sfdisk version is less than 2.26.0, then you should use following sfdisk command:
+ # sfdisk --in-order --Linux --unit M $DISK <<-__EOF__
+
+ # NOTE: sfdisk 2.26 doesn't support units other than sectors and marks --unit option as deprecated.
+ # The input data needs to contain multipliers (MiB) instead.
+ local version=(`sfdisk -v | grep -o '[0-9]\+'`)
+ local major=${version[0]}
+ local minor=${version[1]}
+ local sfdisk_new=0
+ local support_delete=0
+
+ if [ $major -gt 2 ]; then
+ sfdisk_new=1
+ if [ $major -eq 2 -a $minor -ge 28 ]; then
+ support_delete=1
+ fi
+ else
+ if [ $major -eq 2 -a $minor -ge 26 ]; then
+ sfdisk_new=1
+ fi
+ fi
+
+ if [ $sfdisk_new == 0 ]; then
+ echo "$(tput setaf 3)$(tput bold)NOTICE: Your sfdisk ${version[0]}.${version[1]} version is too old. Update Latest sfdisk!"
+ tput sgr 0
+ exit -1
+ fi
+
+ local -r DISK=$DEVICE
+ local -r SIZE=`sfdisk -s $DISK`
+ local -r SIZE_MB=$((SIZE >> 10))
+
+ local -r SPL_SZ=2
+ local -r UBOOT_SZ=4
+ local -r BOOT_SZ=292
+ local -r ROOTFS_SZ=3072
+ local -r DATA_SZ=1344
+ local -r MODULE_SZ=32
+ local -r RAMDISK_SZ=32
+ local -r RAMDISK_RECOVERY_SZ=32
+ local -r INFORM_SZ=8
+ local -r HAL_SZ=256
+ local -r PARAM_SZ=4
+ local -r DATA_SIZE=1344
+ local -r RESERVED1_SZ=64
+ local -r RESERVED2_SZ=125
+ local -r EXTEND_SZ=36
+
+ let "USER_SZ = $SIZE_MB - $SPL_SZ - $UBOOT_SZ - $BOOT_SZ - $ROOTFS_SZ - $DATA_SZ - $MODULE_SZ - $RAMDISK_SZ - $RAMDISK_RECOVERY_SZ - $INFORM_SZ - $EXTEND_SZ - $HAL_SZ - $RESERVED1_SZ - $RESERVED2_SZ - $PARAM_SZ"
+
+ local -r SPL=spl
+ local -r UBOOT=uboot
+ local -r BOOT_A=${PART_TABLE[0 * ${PART_TABLE_COL} + 3]}
+ local -r ROOTFS_A=${PART_TABLE[1 * ${PART_TABLE_COL} + 3]}
+ local -r SYSTEMDATA=${PART_TABLE[2 * ${PART_TABLE_COL} + 3]}
+ local -r USER=${PART_TABLE[3 * ${PART_TABLE_COL} + 3]}
+ local -r MODULE_A=${PART_TABLE[4 * ${PART_TABLE_COL} + 3]}
+ local -r RAMDISK_A=${PART_TABLE[5 * ${PART_TABLE_COL} + 3]}
+ local -r RAMDISK_RECOVERY_A=${PART_TABLE[6 * ${PART_TABLE_COL} + 3]}
+ local -r INFORM=inform
+ local -r HAL_A=${PART_TABLE[7 * ${PART_TABLE_COL} + 3]}
+ local -r RESERVED0=reserved0
+ local -r RESERVED1=reserved1
+ local -r RESERVED2=reserved2
+
+ if [[ $USER_SZ -le 100 ]]
+ then
+ echo "We recommend to use more than 8GB disk"
+ exit 0
+ fi
+
+ echo "================================================"
+ echo "Label dev size"
+ echo "================================================"
+ echo $SPL" " $DISK"1 " $SPL_SZ "MB"
+ echo $UBOOT" " $DISK"2 " $UBOOT_SZ "MB"
+ echo $BOOT_A" " $DISK"3 " $BOOT_SZ "MB"
+ echo "[Extend]"" " $DISK"4"
+ echo " "$SYSTEMDATA" " $DISK"5 " $DATA_SZ "MB"
+ echo " "$ROOTFS_A" " $DISK"6 " $ROOTFS_SZ "MB"
+ echo " "$USER" " $DISK"7 " $USER_SZ "MB"
+ echo " "$MODULE_A" " $DISK"8 " $MODULE_SZ "MB"
+ echo " "$RAMDISK_A" " $DISK"9 " $RAMDISK_SZ "MB"
+ echo " "$RAMDISK_RECOVERY_A" " $DISK"10 " $RAMDISK_RECOVERY_SZ "MB"
+ echo " "$INFORM" " $DISK"11 " $INFORM_SZ "MB"
+ echo " "$HAL_A" " $DISK"12 " $HAL_SZ "MB"
+ echo " "$RESERVED0" " $DISK"13 " $PARAM_SZ "MB"
+ echo " "$RESERVED1" " $DISK"14 " $RESERVED1_SZ "MB"
+ echo " "$RESERVED2" " $DISK"15 " $RESERVED2_SZ "MB"
+
+ local MOUNT_LIST=`mount | grep $DISK | awk '{print $1}'`
+ for mnt in $MOUNT_LIST
+ do
+ umount $mnt
+ done
+
+ echo "Remove partition table..."
+ dd if=/dev/zero of=$DISK bs=512 count=32 conv=notrunc
+
+ if [ $support_delete == 1 ]; then
+ sfdisk --delete $DISK
+ fi
+
+ SCRIPT=""
+ for ((idx=0; idx < $PART_TABLE_ROW; idx++)); do
+ NR=${PART_TABLE[idx * ${PART_TABLE_COL} + 1]}
+ eval "PART_LABEL_NR_${NR}=${PART_TABLE[idx * ${PART_TABLE_COL} + 3]}"
+ done
+
+ sfdisk $DISK <<-__EOF__
+ label: gpt
+ start=4MiB, type= 2E54B353-1271-4842-806F-E436D6AF6985, size=${SPL_SZ}MiB, name=spl
+ size=${UBOOT_SZ}MiB, type=5B193300-FC78-40CD-8002-E86C45580B47, name=uboot
+ size=${BOOT_SZ}MiB, type= C12A7328-F81F-11D2-BA4B-00A0C93EC93B, name=${PART_LABEL_NR_3}
+ size=${EXTEND_SZ}MiB, name=none
+ size=${ROOTFS_SZ}MiB, name=${PART_LABEL_NR_5}
+ size=${DATA_SZ}MiB, name=${PART_LABEL_NR_6}
+ size=${USER_SZ}MiB, name=${PART_LABEL_NR_7}
+ size=${MODULE_SZ}MiB, name=${PART_LABEL_NR_8}
+ size=${RAMDISK_SZ}MiB, name=${PART_LABEL_NR_9}
+ size=${RAMDISK_RECOVERY_SZ}MiB, name=${PART_LABEL_NR_10}
+ size=${INFORM_SZ}MiB, name=inform
+ size=${HAL_SZ}MiB, name=${PART_LABEL_NR_12}
+ size=${PARAM_SZ}MiB, name=reserved0
+ size=${RESERVED1_SZ}MiB, name=reserved1
+ size=${RESERVED2_SZ}MiB, name=reserved2
+ __EOF__
+
+
+ for ((idx=0;idx<$PART_TABLE_ROW;idx++)); do
+ local PART=/dev/`lsblk ${DISK} -o TYPE,KNAME | awk "/^part.*[a-z]${PART_TABLE[$idx * ${PART_TABLE_COL} + 1]}\$/ { print \\\$2 }"`
+ if [ "${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]}" == "vfat" ]; then
+ mkfs.vfat -F 16 ${PART} -n ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]}
+ if [ $? -eq 1 ]; then
+ echo "Failed to format as FAT filesystem"
+ exit -1
+ fi
+ elif [ "${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]}" == "ext4" ]; then
+ mkfs.ext4 -q ${PART} -L ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]} -F
+ else
+ echo "Skip to format for unknown filesystem type ${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]} for part$idx, ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]}"
+ fi
+ done
+}
+
+function show_usage () {
+ echo "- Usage:"
+ echo " sudo ./sd_fusing*.sh -d <device> [-b <path> <path> ..] [--format]"
+ echo " -d : device ndoe "
+ echo " -b : binary "
+}
+
+function check_partition_format () {
+ if [ "$FORMAT" != "2" ]; then
+ echo "-----------------------"
+ echo "Skip $DEVICE format"
+ echo "-----------------------"
+ return 0
+ fi
+
+ echo "-------------------------------"
+ echo "Start $DEVICE format"
+ echo ""
+ mkpart_3
+ echo "End $DEVICE format"
+ echo "-------------------------------"
+ echo ""
+}
+
+function check_args () {
+ if [ "$DEVICE" == "" ]; then
+ echo "$(tput setaf 1)$(tput bold)- Device node is empty!"
+ show_usage
+ tput sgr 0
+ exit 0
+ fi
+
+ if [ "$DEVICE" != "" ]; then
+ echo "Device: $DEVICE"
+ fi
+
+ if [ "$FUSING_BINARY_NUM" != 0 ]; then
+ echo "Fusing binary: "
+ for ((bid = 0 ; bid < $FUSING_BINARY_NUM ; bid++))
+ do
+ echo " ${FUSING_BINARY_ARRAY[bid]}"
+ done
+ echo ""
+ fi
+
+ if [ "$FORMAT" == "1" ]; then
+ echo ""
+ echo "$(tput setaf 3)$(tput bold)$DEVICE will be formatted, Is it OK? [y/<n>]"
+ tput sgr 0
+ read input
+ if [ "$input" == "y" ] || [ "$input" == "Y" ]; then
+ FORMAT=2
+ else
+ FORMAT=0
+ fi
+ fi
+}
+
+function check_device () {
+ if [ ! -b "$DEVICE" ]; then
+ echo "No such device: $DEVICE"
+ exit 0
+ fi
+
+ DEVICE=/dev/`lsblk $DEVICE -o TYPE,KNAME | awk '/^(disk)|(loop)/ { print $2 }'`
+
+ local REMOVABLE=`lsblk $DEVICE -nd -o RM | grep 1 | wc -l`
+ if [ "$REMOVABLE" == "0" ]; then
+ echo ""
+ echo "$(tput setaf 3)$(tput bold)$DEVICE is not a removable disk, Is it OK? [y/<n>]"
+ tput sgr 0
+ read input
+ if [ "$input" != "y" ] && [ "$input" != "Y" ]; then
+ exit 0
+ fi
+ fi
+
+ if [ ! -w "$DEVICE" ]; then
+ echo "Write not permitted: $DEVICE"
+ exit 0
+ fi
+}
+
+function print_logo () {
+ echo ""
+ echo "For VisionFive2 , version 1.0.0"
+ echo ""
+}
+
+print_logo
+
+function add_fusing_binary() {
+ local declare binary_name=$1
+
+ if [ "$binary_name" != "" ]; then
+ if [ -f "$binary_name" ]; then
+ FUSING_BINARY_ARRAY[$FUSING_BINARY_NUM]=$binary_name
+
+ FUSING_BINARY_NUM=$((FUSING_BINARY_NUM + 1))
+ else
+ echo "No such file: $binary_name"
+ fi
+ fi
+}
+
+
+declare -i binary_option=0
+
+while test $# -ne 0; do
+ option=$1
+ shift
+
+ case $option in
+ --f | --format)
+ FORMAT="1"
+ binary_option=0
+ ;;
+ -d)
+ DEVICE=$1
+ binary_option=0
+ shift
+ ;;
+ -b)
+ add_fusing_binary $1
+ binary_option=1
+ shift
+ ;;
+ *)
+ if [ $binary_option == 1 ];then
+ add_fusing_binary $option
+ else
+ echo "Unkown command: $option"
+ exit
+ fi
+ ;;
+ esac
+done
+
+check_args
+check_device
+check_partition_format
+check_ddversion
+fuse_image
projects / platform / kernel / u-boot.git / commitdiff