ppc/85xx: Fix compile err when PCI disabled on P1_P2_RDB

u-boot cannot be compiled after disabling CONFIG_PCI.

Place PCI related codes under #ifdef CONFIG_PCI

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 440fcb9..0780942 100644 (file)
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -222,7 +222,9 @@ void ft_board_setup(void *blob, bd_t *bd)
        base = getenv_bootm_low();
        size = getenv_bootm_size();
 
+#if defined(CONFIG_PCI)
        ft_pci_board_setup(blob);
+#endif /* #if defined(CONFIG_PCI) */
 
        fdt_fixup_memory(blob, (u64)base, (u64)size);
 }

diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c
index 93d0bf7..b85c268 100644 (file)
--- a/board/freescale/p1_p2_rdb/tlb.c
+++ b/board/freescale/p1_p2_rdb/tlb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -58,6 +58,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
                        MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
                        0, 2, BOOKE_PAGESZ_16M, 1),
 
+#if defined(CONFIG_PCI)
        /* *I*G* - PCI */
        SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS,
                        MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -68,6 +69,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
                        MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                        0, 4, BOOKE_PAGESZ_256K, 1),
 
+#endif /* #if defined(CONFIG_PCI) */
        /* *I*G - NAND */
        SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
                        MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index d18d2f6..bf34740 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -83,17 +83,23 @@
 #define CONFIG_E500            1       /* BOOKE e500 family */
 #define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48/P1020/P2020,etc*/
 #define CONFIG_FSL_ELBC                1       /* Enable eLBC Support */
+
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
+#if defined(CONFIG_PCI)
 #define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
 #define CONFIG_PCIE2           1       /* PCIE controler 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
+#endif /* #if defined(CONFIG_PCI) */
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
+#if defined(CONFIG_PCI)
 #define CONFIG_E1000           1       /*  E1000 pci Ethernet card*/
+#endif
+
 #ifndef __ASSEMBLY__
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
@@ -364,6 +370,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
+#if defined(CONFIG_PCI)
 #define CONFIG_SYS_PCIE2_NAME          "Slot 1"
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
@@ -385,8 +392,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xffc30000
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
-#if defined(CONFIG_PCI)
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -405,11 +410,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #endif /* CONFIG_PCI */
 
-#if defined(CONFIG_TSEC_ENET)
-#ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI       1
-#endif
 
+#if defined(CONFIG_TSEC_ENET)
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1