+commit 8915f1189c1d29d8be7f4de325702d90a8988219
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Jul 9 17:50:45 2008 -0400
+
+ e1000: add support for 82545GM 64bit PCI-X copper variant
+
+ This PCI-X e1000 variant works by just adding in the correct
+ PCI IDs in the appropriate places.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Jul 9 12:34:11 2008 +0000
+
+ SPARC: Build error fix
+
+ (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
+
+ This patch makes SPARC targets build again. It is caused by
+ phys_addr_t and phys_size_t being defined in the wrong header
+ file. include/lmb.h need those typedefs to build.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 11ccc33fa21acce108f6b4a6936e3271af904c64
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Jul 9 08:17:15 2008 +0200
+
+ Many spelling fixes in README.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit dbab0691d2533560f7e91b92ae844046a9ad1df3
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Jul 9 08:17:06 2008 +0200
+
+ Minor spelling fix in comment.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 8 14:54:58 2008 -0400
+
+ Round the serial port clock divisor value returned by calc_divisor()
+
+ Round the serial port clock divisor value returned by
+ calc_divisor().
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: John Roberts <john.roberts@pwav.com>
+
+commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jul 9 17:47:52 2008 -0500
+
+ NAND: ifdef-protect most of nand.h when using legacy NAND.
+
+ Some macros such as NAND_CTL_SETALE conflict between current and legacy
+ NAND, being defined by the subsystem in the former case and the board
+ config file in the latter.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 8 11:02:05 2008 -0400
+
+ ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
+
+ ARM: Fix for incorrect version of patch applied when
+ adding support for the Lyrtech SFF-SDR board.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
+
+commit 47042b363ee5022b8180c65d3f4558e7972c79cd
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 8 09:08:40 2008 +0900
+
+ Remove useless print message at apollon
+
+ Remove useless print message at apollon
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 7 14:24:39 2008 -0500
+
+ Fix LMB type issues
+
+ The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
+ of casting problems in the bootm code that called the LMB functions.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 7 09:39:06 2008 -0500
+
+ Fix compiler warnings
+
+ gcc-4.3.x generates the following:
+
+ bootm.c: In function 'do_bootm_linux':
+ bootm.c:208: warning: cast from pointer to integer of different size
+ bootm.c:215: warning: cast from pointer to integer of different size
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 15:40:39 2008 +0800
+
+ Remove code duplication for setting the default environment
+
+ common/env_common.c (default_env): new function that resets the environment to
+ the default value
+ common/env_common.c (env_relocate): use default_env instead of own copy
+ common/env_nand.c (env_relocate_spec): use default_env instead of own copy
+ include/environment.h: added default_env prototype
+
+ Signed-off-by: Werner Almesberger <werner@openmoko.org>
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 99c2b434d37863df5dda5207a53760c6506fc2be
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Sun Jun 22 16:13:46 2008 +0200
+
+ NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
+
+ The writeenv() and readenv() calls introduced by the recently added bad block
+ management for environment variables were missing casts therefore producing
+ compile time warnings.
+ While at it fixing some typo in a comment and indentation.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Jun 20 12:38:57 2008 -0500
+
+ NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
+
+ This is particularly problematic now that non-NAND-specific code is
+ including <nand.h>, and thus all debugging code is being compiled
+ regardless of whether it was requested, as reported by Scott McNutt
+ <smcnutt@psyent.com>.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jun 12 19:27:58 2008 +0200
+
+ mmc: Move atmel_mci driver into drivers/mmc
+
+ This makes it easier to use the driver on other platforms.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jun 12 19:27:57 2008 +0200
+
+ avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
+
+ After we move the atmel_mci driver into drivers/mmc, we can't select
+ it with CONFIG_MMC anymore. Introduce a new symbol specifically for
+ this driver so that there's no ambiguity.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5ce13051a48c62bda9723df3b4778c492fb47f36
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jun 12 19:27:56 2008 +0200
+
+ Create drivers/mmc subdirectory
+
+ In order to consolidate more of the various MMC drivers around the
+ tree, we must first have a common place to put them.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b502611b51f02718c2d1117d4981dabceb5af6de
+Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
+Date: Sun Jul 6 12:30:09 2008 +0200
+
+ Change env_get_char from a global function ptr to a function
+
+ This avoids an early global data reference.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 27269417ade432189b234d9fbac98b54e37b978c
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Sun Jul 6 13:57:58 2008 +0400
+
+ Some copy-n-paste fixes in printf usage
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit 0e6989b9faf1588e8723535539e88a0df3c71356
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Sun Jul 6 13:57:00 2008 +0400
+
+ FDT memory and pci node fixes for MPC8260ADS
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Mon Jul 7 06:41:14 2008 -0700
+
+ Fix printf errors.
+
+ The compiler will help find mismatches between printf formats and
+ arguments if you let it. This patch adds the necessary attributes to
+ declarations in include/common.h, then begins to correct the resulting
+ compiler warnings. Some of these were bugs, e.g., "$d" instead of
+ "%d" and incorrect arguments. Others were just annoying, like
+ int-long mismatches on a system where both are 32 bits. It's worth
+ fixing the annoying errors to catch the real ones.
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+
+commit 417faf285b2527acb2de24c5cd3e2621d385408c
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jul 9 11:09:41 2008 -0500
+
+ Allow print_size to print in GB
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e7c374529c87525c9aa463e0557c287887ae4e9e
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Sun Jun 8 23:56:00 2008 -0400
+
+ mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
+
+ Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
+ they are set in the U-Boot environment.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 0192d7d56e9320819dea262f49789ae18fdd2c72
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 8 12:57:14 2008 +0200
+
+ jedec_flash: Fix AM29DL800BB device ID
+
+ As pointed out by Jerry Hicks, this patch corrects the device ID of
+ the Spansion AM29DL800BB NOR device. Verified against latest Spansion
+ datasheet (rev C4 from Dezember 2006).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Jul 7 11:22:37 2008 +0900
+
+ sh: Fix compile error sh7763rdp board
+
+ Disable SH ether driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jul 8 12:03:24 2008 +0900
+
+ sh: Fix SH-boards compile error
+
+ By Cleanup out-or-tree building for some boards (.depend)
+ (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
+ because filse ware changed, some SH-boards have compile error.
+ I revised this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Jun 18 12:10:33 2008 -0400
+
+ Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
+
+ Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
+
+ Remove duplicate code in a if/else block in
+ cpu/arm926ejs/davinci/lxt972.c.
+ Fixed style issues.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fec61431a003f5778bafa2624073a571af8bec9f
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Jun 18 12:10:31 2008 -0400
+
+ Remove duplicate definitions in include/lxt971a.h.
+
+ Remove duplicate definitions in include/lxt971a.h.
+
+ Remove duplicate registers and bits definitions in
+ include/lxt971a.h for standard MII registers, and
+ use values in include/miiphy.h instead.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9751ee0990f467941da0b095a4e995f863672d7a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Jun 11 21:05:00 2008 +0900
+
+ net: sh: Renesas SH7763 Ethernet device support
+
+ Renesas SH7763 has 2 channel Ethernet device.
+ This is 10/100/1000 Base support.
+ But this patch check 10/100 Base only.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:28:05 2008 +0900
+
+ sh: Update Renesas R2DPlus board
+
+ New NOR Flash board support and remove old type flash board config.
+ And Remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:28:01 2008 +0900
+
+ sh: Update Renesas R7780MP board
+
+ New NOR Flash board support and remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c001cd604e9f133743effbddb1c215b48e761c5a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:56 2008 +0900
+
+ sh: Update Renesas Migo-R board
+
+ Remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:52 2008 +0900
+
+ sh: Update Hitachi MS7722SE board
+
+ Remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 26209e48e8791670c93108029a5c31a30016c6df
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:48 2008 +0900
+
+ sh: Cleanup source code of SH7763RDP
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5cd5b2c96ef0025762931349d350287aec03ab47
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:44 2008 +0900
+
+ sh: Cleanup source code of R2DPlus
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:41 2008 +0900
+
+ sh: Cleanup source code of R7780MP
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:38 2008 +0900
+
+ sh: Cleanup source code of MS7722SE
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:34 2008 +0900
+
+ sh: Cleanup source code of MS7720SE
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3ab4827cbe409488ebea1a2ee5094783f2672214
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 7 00:45:03 2008 +0200
+
+ SH: fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9047bfa1e737d787be460387dd6f45737eeceb10
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jul 3 23:16:06 2008 +0900
+
+ net: smc911x: Fix typo
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 2 18:54:08 2008 +0200
+
+ update mvBL-M7 board config
+
+ update mvBL-M7 config file to use UBOOT_VERSION and define
+ CONFIG_HIGH_BATS.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Jun 30 17:45:01 2008 +0900
+
+ net: fix compile problem in smc911x driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9fea65a6c469b1b474b27446feb58738baba2d31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 24 09:54:09 2008 +0200
+
+ ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
+
+ This change helps with better handling with others
+ Xilinx based platform.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jun 17 13:07:11 2008 +0900
+
+ net: ne2000: Move dev_addr variable from grobal to local.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jun 17 13:07:15 2008 +0900
+
+ net: ne2000: Fix compile error of NE2000
+
+ If enable DEBUG, can not compile ne2000 driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Jun 23 22:57:27 2008 -0700
+
+ Add mechanisms for CPU and board-specific Ethernet initialization
+
+ This patch is the first step in cleaning up net/eth.c, by moving Ethernet
+ initialization to CPU or board-specific code. Initial implementation is
+ only on the Freescale TSEC controller, but others will be added soon.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7754f2be5d1835d263aad21b5a629526f3e680b0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 6 01:21:46 2008 +0200
+
+ include/sha256.h: fix file permissions.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
+Author: Patrice Vilchez <patrice.vilchez@atmel.com>
+Date: Tue May 27 11:15:29 2008 +0200
+
+ [AT91SAM9] Fix NAND FLASH timings
+
+ Fix NAND FLASH timings for at91sam9x evaluation kits.
+
+ New timings are based on application note
+ "NAND Flash Support on AT91SAM9 Microcontrollers" available at
+ http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
+
+ Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+
+commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 22 00:15:40 2008 +0200
+
+ Fix boot from NOR due to incorrect reset delay.
+
+ AT91 RSTC registers are battery-backuped, so their values
+ are not reset across power cycles. One of those registers,
+ the AT91_RSTC_MR register, is being modified by U-Boot, in
+ the ethernet initialisation routine, to generate a 500ms
+ user reset.
+
+ Unfortunately, this value is not being restored afterwards,
+ causing subsequent resets to also last for 500ms.
+
+ This long reset sequence causes problems (at least) in the
+ boot sequence from NOR: by the time the CPU tries to load
+ a program from the NOR flash, the latter is still in reset
+ and not yet available.
+
+ Additionaly, this patch fixes a bug in the original code which
+ caused the reset delay to last for 2s instead of 500ms.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f492dd636fbbae529e17533995bc6e5813c007f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 4 20:11:49 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
Author: Wolfgang Denk <wd@denx.de>
Date: Fri Jul 4 20:07:35 2008 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 2 18:54:08 2008 +0200
+
+ update mvBL-M7 board config
+
+ update mvBL-M7 config file to use UBOOT_VERSION.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit ced209c50e80c25f13c083099b05044048d21f4f
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Jul 3 22:39:21 2008 +0200
Signed-off-by: Dave Liu <daveliu@freescale.com>
+commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jun 28 14:56:17 2008 +0200
+
+ ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
+
+ This patch implements a fix provided by AMCC so that the lockup upon
+ simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
+ anymore:
+
+ Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
+ (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
+ USB 2.0 host and SATA.
+
+ This errata is not officially available yet. I'll update the comment
+ to add the errata number later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 8b616edb118e37d05f6401389eaee1c636b22828
Author: Stuart Wood <stuart.wood@labxtechnologies.com>
Date: Mon Jun 2 16:42:19 2008 -0400
Signed-off-by: Andy Fleming <afleming@freescale.com>
+commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 24 17:15:22 2008 +0200
+
+ ppc4xx: Fix compilation problems with phys_size_t
+
+ This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
+ board specific files where it has been missing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 28eab0d77352b84885f938759bf2612b7bf0bc44
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Mon May 19 12:26:38 2008 +0200
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit 6a19c46cae43c16c528eddefae3db97134f1915d
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Jun 23 13:25:34 2008 +0200
+
+ fix non-working mvBL-M7
+
+ Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 846f1574ddddeda2bc227655e687308695f41cdc
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Jun 23 11:40:56 2008 +0200
+
+ fix system config overwrite @ MPC834x and MPC8313
+
+ During 83xx setup the "System I/O configuration register high" gets
+ overwritten with user defined value if CFG_SICRH is defined.
+
+ Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
+ must keep their reset value regardless of configuration.
+
+ On my board (using RGMII) those bits are set after reset - yet it's
+ unclear where they come from.
+
+ The patch keeps both bits on MPC834x and MPC8313.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 17 17:45:27 2008 -0500
+
+ mpc83xx: move CPU_TYPE_ENTRY over to processor.h
+
+ to avoid this:
+
+ cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
+ In file included from cpu.c:33:
+ /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 23 11:15:09 2008 +0200
+
+ ppc4xx: Fix problem in gpio_config()
+
+ As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
+ left by one. So the additional shift is bogus.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 40777812316fc252c941665c0f60c148fd79d50f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Jun 20 22:24:05 2008 +0200
+
+ fdt: Fix typo in variable name.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5f723a3b98c630bde33de74351f2121691fdef14
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Jun 20 10:41:05 2008 +0200
+
+ avr32: Enable SPI flash support on ATNGW100
+
+ The ATNGW100 has 8MB DataFlash on board. Give users access to it through
+ the new SPI flash framework.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Jun 20 12:44:28 2008 +0200
+
+ avr32: Fix SPI portmux initialization
+
+ Use the new GPIO manipulation functions to set up the chip select lines,
+ and make sure both busses use GPIO for chip select control.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
+Author: Peter Ma <pma@mediamatech.com>
+Date: Sun Jun 1 22:59:24 2008 -0700
+
+ avr32: Add GPIO manipulation functions
+
+ Adds GPIO manipulation functions for AVR32 AP7 platform.
+
+ Signed-off-by: Peter Ma <pma@mediamatech.com>
+ [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
Author: Wolfgang Grandegger <wg@grandegger.com>
Date: Thu Jun 5 13:02:30 2008 +0200
E: timo.tuunainen@sysart.fi
D: Support for Artila M-501 starter kit
W: http://www.sysart.fi/
+
+N: Philip Balister
+E: philip@opensdr.com
+D: Port to Lyrtech SFFSDR development board.
+W: www.opensdr.com
LIST_sh4=" \
ms7750se \
ms7722se \
- Migo-R \
+ MigoR \
r7780mp \
r2dplus \
sh7763rdp \
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/misc/libmisc.a
+LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
TAG_SUBDIRS += drivers/i2c
TAG_SUBDIRS += drivers/input
TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mmc
TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary
The "snapshot" links on this page allow you to download tarballs of
-any version you might be interested in. Ofifcial releases are also
+any version you might be interested in. Official releases are also
available for FTP download from the ftp://ftp.denx.de/pub/u-boot/
directory.
* Provide extended interface to Linux boot loader
* S-Record download
* network boot
- * PCMCIA / CompactFLash / ATA disk / SCSI ... boot
+ * PCMCIA / CompactFlash / ATA disk / SCSI ... boot
- create ARMBoot project (http://sourceforge.net/projects/armboot)
- add other CPU families (starting with ARM)
- create U-Boot project (http://sourceforge.net/projects/u-boot)
cd u-boot
make TQM823L_config
-For the Cogent platform, you need to specify the cpu type as well;
+For the Cogent platform, you need to specify the CPU type as well;
e.g. "make cogent_mpc8xx_config". And also configure the cogent
directory according to the instructions in cogent/README.
- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined)
Define one or more of
CONFIG_LCD_HEARTBEAT - update a character position on
- the lcd display every second with
+ the LCD display every second with
a "rotator" |\-/|\-/
- Board flavour: (if CONFIG_MPC8260ADS is defined)
Define exactly one of
CONFIG_MPC8240, CONFIG_MPC8245
-- 8xx CPU Options: (if using an MPC8xx cpu)
+- 8xx CPU Options: (if using an MPC8xx CPU)
CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if
get_gclk_freq() cannot work
e.g. if there is no 32KHz
CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only]
- When transfering memsize parameter to linux, some versions
+ When transferring memsize parameter to linux, some versions
expect it to be in bytes, others in MB.
Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
OF_TBCLK - The timebase frequency.
OF_STDOUT_PATH - The path to the console device
- boards with QUICC Engines require OF_QE to set UCC mac addresses
+ boards with QUICC Engines require OF_QE to set UCC MAC
+ addresses
CONFIG_OF_BOARD_SETUP
CONFIG_OF_BOOT_CPU
- This define fills in the correct boot cpu in the boot
+ This define fills in the correct boot CPU in the boot
param header, the default value is zero if undefined.
- Serial Ports:
linux_logo.h for logo.
Requires CONFIG_VIDEO_LOGO
CONFIG_CONSOLE_EXTRA_INFO
- addional board info beside
+ additional board info beside
the logo
When CONFIG_CFB_CONSOLE is defined, video console is
The value of these goes into the environment as
"ramboot" and "nfsboot" respectively, and can be used
as a convenience, when switching between booting from
- ram and nfs.
+ RAM and NFS.
- Pre-Boot Commands:
CONFIG_PREBOOT
Support for Intel 8254x gigabit chips.
CONFIG_E1000_FALLBACK_MAC
- default MAC for empty eeprom after production.
+ default MAC for empty EEPROM after production.
CONFIG_EEPRO100
Support for Intel 82557/82559/82559ER chips.
- Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
+ Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
write routine for first time initialisation.
CONFIG_TULIP
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the
command "setenv stdin usbtty; setenv stdout usbtty" and
- attach your usb cable. The Unix command "dmesg" should print
+ attach your USB cable. The Unix command "dmesg" should print
it has found a new device. The environment variable usbtty
can be set to gserial or cdc_acm to enable your device to
appear to a USB host as a Linux gserial device or a
assumed.
For the CT69000 and SMI_LYNXEM drivers, videomode is
- selected via environment 'videomode'. Two diferent ways
+ selected via environment 'videomode'. Two different ways
are possible:
- "videomode=num" 'num' is a standard LiLo mode numbers.
Following standard modes are supported (* is default):
CONFIG_PHY_GIGE
If this option is set, support for speed/duplex
- detection of Gigabit PHY is included.
+ detection of gigabit PHY is included.
CONFIG_PHY_RESET_DELAY
CONFIG_ETH2ADDR
CONFIG_ETH3ADDR
- Define a default value for ethernet address to use
- for the respective ethernet interface, in case this
+ Define a default value for Ethernet address to use
+ for the respective Ethernet interface, in case this
is not determined automatically.
- IP address:
CONFIG_IPADDR
Define a default value for the IP address to use for
- the default ethernet interface, in case this is not
+ the default Ethernet interface, in case this is not
determined through e.g. bootp.
- Server IP address:
CONFIG_SERVERIP
- Defines a default value for theIP address of a TFTP
+ Defines a default value for the IP address of a TFTP
server to contact when using the "tftboot" command.
- Multicast TFTP Mode:
Defines whether you want to support multicast TFTP as per
rfc-2090; for example to work with atftp. Lets lots of targets
- tftp down the same boot image concurrently. Note: the ethernet
+ tftp down the same boot image concurrently. Note: the Ethernet
driver in use must provide a function: mcast() to join/leave a
multicast group.
A printf format string which contains the ascii name of
the port. Normally is set to "eth%d" which sets
- eth0 for the first ethernet, eth1 for the second etc.
+ eth0 for the first Ethernet, eth1 for the second etc.
CONFIG_CDP_CAPABILITIES
These enable I2C serial bus commands. Defining either of
(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
- include the appropriate I2C driver for the selected cpu.
+ include the appropriate I2C driver for the selected CPU.
This will allow you to use i2c commands at the u-boot
command line (as long as you set CONFIG_CMD_I2C in
In both cases you will need to define CFG_I2C_SPEED
to be the frequency (in Hz) at which you wish your i2c bus
to run and CFG_I2C_SLAVE to be the address of this node (ie
- the cpu's i2c node address).
+ the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
- sets the cpu up as a master node and so its address should
+ sets the CPU up as a master node and so its address should
therefore be cleared to 0 (See, eg, MPC823e User's Manual
p.16-473). So, set CFG_I2C_SLAVE to 0.
Maximum time to wait for the INIT_B line to deassert
after PROB_B has been deasserted during a Virtex II
FPGA configuration sequence. The default time is 500
- mS.
+ ms.
CFG_FPGA_WAIT_BUSY
Maximum time to wait for BUSY to deassert during
- Virtex II FPGA configuration. The default is 5 mS.
+ Virtex II FPGA configuration. The default is 5 ms.
CFG_FPGA_WAIT_CONFIG
Time to wait after FPGA configuration. The default is
- 200 mS.
+ 200 ms.
- Configuration Management:
CONFIG_IDENT_STRING
protects these variables from casual modification by
the user. Once set, these variables are read-only,
and write or delete attempts are rejected. You can
- change this behviour:
+ change this behaviour:
If CONFIG_ENV_OVERWRITE is #defined in your config
file, the write protection for vendor parameters is
Alternatively, if you #define _both_ CONFIG_ETHADDR
_and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default
- ethernet address is installed in the environment,
+ Ethernet address is installed in the environment,
which can be changed exactly ONCE by the user. [The
serial# is unaffected by this, i. e. it remains
read-only.]
Define this variable to stop the system in case of a
fatal error, so that you have to reset it manually.
This is probably NOT a good idea for an embedded
- system where you want to system to reboot
+ system where you want the system to reboot
automatically as fast as possible, but it may be
useful during development since you can try to debug
the conditions that lead to the situation.
- Commandline Editing and History:
CONFIG_CMDLINE_EDITING
- Enable editiong and History functions for interactive
+ Enable editing and History functions for interactive
commandline input operations
- Default Environment:
Adding this option adds support for Xilinx SystemACE
chips attached via some sort of local bus. The address
- of the chip must alsh be defined in the
+ of the chip must also be defined in the
CFG_SYSTEMACE_BASE macro. For example:
#define CONFIG_SYSTEMACE
-12 common/image.c Ramdisk data has bad checksum
11 common/image.c Ramdisk data has correct checksum
12 common/image.c Ramdisk verification complete, start loading
- -13 common/image.c Wrong Image Type (not PPC Linux Ramdisk)
+ -13 common/image.c Wrong Image Type (not PPC Linux ramdisk)
13 common/image.c Start multifile image verification
14 common/image.c No initial ramdisk, no multifile, continue.
-60 common/env_common.c Environment has a bad CRC, using default
- 64 net/eth.c starting with Ethernetconfiguration.
+ 64 net/eth.c starting with Ethernet configuration.
-64 net/eth.c no Ethernet found.
65 net/eth.c Ethernet found.
-80 common/cmd_net.c usage wrong
80 common/cmd_net.c before calling NetLoop()
- -81 common/cmd_net.c some error in NetLoop() occured
+ -81 common/cmd_net.c some error in NetLoop() occurred
81 common/cmd_net.c NetLoop() back without error
-82 common/cmd_net.c size == 0 (File with size 0 loaded)
82 common/cmd_net.c trying automatic boot
105 common/cmd_bootm.c Kernel subimage hash verification OK
-105 common/cmd_bootm.c Kernel subimage is for unsupported architecture
106 common/cmd_bootm.c Architecture check OK
- -106 common/cmd_bootm.c Kernel subimage has wrong typea
- 107 common/cmd_bootm.c Kernel subimge type OK
+ -106 common/cmd_bootm.c Kernel subimage has wrong type
+ 107 common/cmd_bootm.c Kernel subimage type OK
-107 common/cmd_bootm.c Can't get kernel subimage data/size
108 common/cmd_bootm.c Got kernel subimage data/size
-108 common/cmd_bootm.c Wrong image type (not legacy, FIT)
120 common/image.c Start initial ramdisk verification
-120 common/image.c Ramdisk FIT image has incorrect format
121 common/image.c Ramdisk FIT image has correct format
- 122 common/image.c No Ramdisk subimage unit name, using configuration
+ 122 common/image.c No ramdisk subimage unit name, using configuration
-122 common/image.c Can't get configuration for ramdisk subimage
123 common/image.c Ramdisk unit name specified
-124 common/image.c Can't get ramdisk subimage node offset
129 common/image.c Can't get ramdisk load address
-129 common/image.c Got ramdisk load address
- -130 common/cmd_doc.c Icorrect FIT image format
+ -130 common/cmd_doc.c Incorrect FIT image format
131 common/cmd_doc.c FIT image format OK
- -140 common/cmd_ide.c Icorrect FIT image format
+ -140 common/cmd_ide.c Incorrect FIT image format
141 common/cmd_ide.c FIT image format OK
- -150 common/cmd_nand.c Icorrect FIT image format
+ -150 common/cmd_nand.c Incorrect FIT image format
151 common/cmd_nand.c FIT image format OK
[so far only for SMDK2400 and TRAB boards]
-- Modem support endable:
+- Modem support enable:
CONFIG_MODEM_SUPPORT
- RTS/CTS Flow control enable:
There are common interrupt_init() and timer_interrupt()
for all PPC archs. interrupt_init() calls interrupt_init_cpu()
- for cpu specific initialization. interrupt_init_cpu()
+ for CPU specific initialization. interrupt_init_cpu()
should set decrementer_count to appropriate value. If
- cpu resets decrementer automatically after interrupt
+ CPU resets decrementer automatically after interrupt
(ppc4xx) it should set decrementer_count to zero.
- timer_interrupt() calls timer_interrupt_cpu() for cpu
+ timer_interrupt() calls timer_interrupt_cpu() for CPU
specific handling. If board has watchdog / status_led
/ other_activity_monitor it works automatically from
general timer_interrupt().
In the target system modem support is enabled when a
specific key (key combination) is pressed during
power-on. Otherwise U-Boot will boot normally
- (autoboot). The key_pressed() fuction is called from
+ (autoboot). The key_pressed() function is called from
board_init(). Currently key_pressed() is a dummy
function, returning 1 and thus enabling modem
initialization.
If there are no modem init strings in the
environment, U-Boot proceed to autoboot; the
previous output (banner, info printfs) will be
- supressed, though.
+ suppressed, though.
See also: doc/README.Modem
- CFG_MEM_TOP_HIDE (PPC only):
If CFG_MEM_TOP_HIDE is defined in the board config header,
this specified memory area will get subtracted from the top
- (end) of ram and won't get "touched" at all by U-Boot. By
+ (end) of RAM and won't get "touched" at all by U-Boot. By
fixing up gd->ram_size the Linux kernel should gets passed
the now "corrected" memory size and won't touch it either.
This should work for arch/ppc and arch/powerpc. Only Linux
The two-step approach is usually more reliable, since
you can check if the download worked before you erase
- the flash, but in some situations (when sytem RAM is
- too limited to allow for a tempory copy of the
+ the flash, but in some situations (when system RAM is
+ too limited to allow for a temporary copy of the
downloaded image) this option may be very useful.
- CFG_FLASH_CFI:
column displays, 15 (3..1) for 40 column displays.
- CFG_RX_ETH_BUFFER:
- Defines the number of ethernet receive buffers. On some
- ethernet controllers it is recommended to set this value
+ Defines the number of Ethernet receive buffers. On some
+ Ethernet controllers it is recommended to set this value
to 8 or even higher (EEPRO100 or 405 EMAC), since all
buffers can be full shortly after enabling the interface
- on high ethernet traffic.
+ on high Ethernet traffic.
Defaults to 4 if not defined.
The following definitions that deal with the placement and management
CFG_ENV_SIZE_REDUND
These settings describe a second storage area used to hold
- a redundand copy of the environment data, so that there is
+ a redundant copy of the environment data, so that there is
a valid backup copy in case there is a power failure during
a "saveenv" operation.
- CFG_ENV_ADDR:
- CFG_ENV_SIZE:
- These two #defines are used to determin the memory area you
+ These two #defines are used to determine the memory area you
want to use for environment. It is assumed that this memory
can just be read and written to, without any special
provision.
BE CAREFUL! The first access to the environment happens quite early
in U-Boot initalization (when we try to get the setting of for the
-console baudrate). You *MUST* have mappend your NVRAM area then, or
+console baudrate). You *MUST* have mapped your NVRAM area then, or
U-Boot will hang.
Please note that even with NVRAM we still use a copy of the
CFG_ISA_IO_STRIDE
- defines the spacing between fdc chipset registers
+ defines the spacing between FDC chipset registers
(default value 1)
CFG_ISA_IO_OFFSET
defines the offset of register from address. It
depends on which part of the data bus is connected to
- the fdc chipset. (default value 0)
+ the FDC chipset. (default value 0)
If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and
CFG_FDC_DRIVE_NUMBER are undefined, they take their
Normally these variables MUST NOT be defined. The
only exception is when U-Boot is loaded (to RAM) by
some other boot loader or by a debugger which
- performs these intializations itself.
+ performs these initializations itself.
Building the Software:
additional information is available from the board vendor; for
instance, the TQM823L systems are available without (standard)
or with LCD support. You can select such additional "features"
- when chosing the configuration, i. e.
+ when choosing the configuration, i. e.
make TQM823L_config
- will configure for a plain TQM823L, i. e. no LCD support
for use by the bootm command. See also "bootm_size"
environment variable. Address defined by "bootm_low" is
also the base of the initial memory mapping for the Linux
- kernel -- see the descripton of CFG_BOOTMAPSZ.
+ kernel -- see the description of CFG_BOOTMAPSZ.
bootm_size - Memory range available for image processing in the bootm
command can be restricted. This variable is given as
themselves.
npe_ucode - see CONFIG_IXP4XX_NPE_EXT_UCOD
- if set load address for the npe microcode
+ if set load address for the NPE microcode
tftpsrcport - If this is set, the value is used for TFTP's
UDP source port.
destination port instead of the Well Know Port 69.
vlan - When set to a value < 4095 the traffic over
- ethernet is encapsulated/received over 802.1q
+ Ethernet is encapsulated/received over 802.1q
VLAN tagged frames.
The following environment variables may be used and automatically
executed anyway.
(2) If you execute several variables with one call to run (i. e.
- calling run with a list af variables as arguments), any failing
+ calling run with a list of variables as arguments), any failing
command will cause "run" to terminate, i. e. the remaining
variables are not executed.
Note for Redundant Ethernet Interfaces:
=======================================
-Some boards come with redundant ethernet interfaces; U-Boot supports
+Some boards come with redundant Ethernet interfaces; U-Boot supports
such configurations and is capable of automatic selection of a
"working" interface when needed. MAC assignment works as follows:
Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000]
...
-If you want to boot a Linux kernel with initial ram disk, you pass
+If you want to boot a Linux kernel with initial RAM disk, you pass
the memory addresses of both the kernel and the initrd image (PPBCOOT
format!) to the "bootm" command:
require any physical RAM backing up the cache. The cleverness
is that the cache is being used as a temporary supply of
necessary storage before the SDRAM controller is setup. It's
- beyond the scope of this list to expain the details, but you
+ beyond the scope of this list to explain the details, but you
can see how this works by studying the cache architecture and
operation in the architecture and processor-specific manuals.
OCM is On Chip Memory, which I believe the 405GP has 4K. It
is another option for the system designer to use as an
- initial stack/ram area prior to SDRAM being available. Either
+ initial stack/RAM area prior to SDRAM being available. Either
option should work for you. Using CS 4 should be fine if your
board designers haven't used it for something that would
cause you grief during the initial boot! It is frequently not
* Initialized global data (data segment) is read-only. Do not attempt
to write it.
-* Do not use any unitialized global data (or implicitely initialized
+* Do not use any uninitialized global data (or implicitely initialized
as zero data - BSS segment) at all - this is undefined, initiali-
zation is performed later (when relocating to RAM).
----------------------
In the reset configuration, U-Boot starts at the reset entry point
-(on most PowerPC systens at address 0x00000100). Because of the reset
+(on most PowerPC systems at address 0x00000100). Because of the reset
configuration for CS0# this is a mirror of the onboard Flash memory.
To be able to re-map memory U-Boot then jumps to its link address.
To be able to implement the initialization code in C, a (small!)
LIB = $(obj)lib$(BOARD).a
-OBJS := migo_r.o
+COBJS := migo_r.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
do {
__raw_writew(0x1, LAN_RESET_REGISTER);
udelay(100);
- if (cnt == 0) {
- printf("1. eth reset err\n");
+ if (cnt == 0)
goto eth_reset_err_out;
- }
--cnt;
} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
do {
__raw_writew(0x0, LAN_RESET_REGISTER);
udelay(100);
- if (cnt == 0) {
- printf("2. eth reset err\n");
+ if (cnt == 0)
goto eth_reset_err_out;
- }
--cnt;
} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
udelay(1000);
ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
if (ret < 0) {
- printf("ft_blob_update): cannot set /memory/reg "
+ printf("ft_blob_update(): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
}
LIB = $(obj)lib$(BOARD).a
-COBJS := dv_board.o
+COBJS := $(BOARD).o
SOBJS := board_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
#
+# Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+# Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+#
# Lyrtech SFF SDR board (ARM926EJS) cpu
-# see http://www.lyrtech.com/ for more information on Lyrtech
#
# SFF SDR board has 1 bank of 128 MB DDR RAM
# Physical Address:
# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0,
# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc).
#
-# we load ourself to 8400'0000
-#
-#
-
-# Provide at least 32MB spacing between us and the Integrity kernel image
+# we load ourself to 8400'0000 to provide at least 32MB spacing
+# between us and the Integrity kernel image
TEXT_BASE = 0x84000000
+++ /dev/null
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void timer_init(void);
-extern int eth_hw_init(void);
-extern phy_t phy;
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01);
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ((id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO))
- * mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03);
- while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
-int board_init(void)
-{
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_SFFSDR;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* Workaround for TMS320DM6446 errata 1.3.22 */
- REG(PSC_SILVER_BULLET) = 0;
-
- /* Power on required peripherals */
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
- lpsc_on(DAVINCI_LPSC_I2C);
- lpsc_on(DAVINCI_LPSC_UART0);
- lpsc_on(DAVINCI_LPSC_TIMER1);
- lpsc_on(DAVINCI_LPSC_GPIO);
-
- /* Powerup the DSP */
- dsp_on();
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= 1;
-
- /* Enable EMAC and AEMIF pins */
- REG(PINMUX0) = 0x80000c1f;
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= (1 << 7);
-
- /* Set the Bus Priority Register to appropriate value */
- REG(VBPR) = 0x20;
-
- timer_init();
-
- return(0);
-}
-
-int misc_init_r(void)
-{
- u_int8_t tmp[20], buf[10];
- int i = 0;
- int clk = 0;
-
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2);
- printf("DDR Clock: %dMHz\n", (clk / 2));
-
- /* Configure I2C switch (PCA9543) to enable channel 0. */
- tmp[0] = CFG_I2C_PCA9543_ENABLE_CH0;
- if (i2c_write(CFG_I2C_PCA9543_ADDR, 0,
- CFG_I2C_PCA9543_ADDR_LEN, tmp, 1))
- printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
-
- /* Set Ethernet MAC address from EEPROM.
- * We must read 8 bytes because data is stored in little-endian. */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x05A8,
- CFG_I2C_EEPROM_ADDR_LEN, buf, 8)) {
- printf("Read from EEPROM @ 0x%02x failed\n",
- CFG_I2C_EEPROM_ADDR);
- } else {
- tmp[0] = 0xff;
- for (i = 0; i < 6; i++)
- tmp[0] &= buf[i];
-
- if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
- sprintf((char *)&tmp[0],
- "%02x:%02x:%02x:%02x:%02x:%02x",
- buf[3], buf[2], buf[1], buf[0],
- buf[7], buf[6]);
- setenv("ethaddr", (char *)&tmp[0]);
- }
- }
-
- if (!eth_hw_init()) {
- printf("Ethernet init failed\n");
- } else {
- printf("ETH PHY: %s\n", phy.name);
- }
-
- return(0);
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
--- /dev/null
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */
+#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */
+
+#define INTEGRITY_SYSCFG_OFFSET 0x7E8
+#define INTEGRITY_CHECKWORD_OFFSET 0x7F8
+#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void timer_init(void);
+extern int eth_hw_init(void);
+extern phy_t phy;
+
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01);
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ switch (id) {
+ case DAVINCI_LPSC_VPSSSLV:
+ case DAVINCI_LPSC_EMAC:
+ case DAVINCI_LPSC_EMAC_WRAPPER:
+ case DAVINCI_LPSC_MDIO:
+ case DAVINCI_LPSC_USB:
+ case DAVINCI_LPSC_ATA:
+ case DAVINCI_LPSC_VLYNQ:
+ case DAVINCI_LPSC_UHPI:
+ case DAVINCI_LPSC_DDR_EMIF:
+ case DAVINCI_LPSC_AEMIF:
+ case DAVINCI_LPSC_MMC_SD:
+ case DAVINCI_LPSC_MEMSTICK:
+ case DAVINCI_LPSC_McBSP:
+ case DAVINCI_LPSC_GPIO:
+ *mdctl |= 0x200;
+ break;
+ }
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03);
+ while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
+}
+
+#if !defined(CFG_USE_DSPLINK)
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+#endif /* CFG_USE_DSPLINK */
+
+int board_init(void)
+{
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_SFFSDR;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+#if !defined(CFG_USE_DSPLINK)
+ /* Powerup the DSP */
+ dsp_on();
+#endif /* CFG_USE_DSPLINK */
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= 1;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+/* Read ethernet MAC address from Integrity data structure inside EEPROM. */
+int read_mac_address(uint8_t *buf)
+{
+ u_int32_t value, mac[2], address;
+
+ /* Read Integrity data structure checkword. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
+ CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ goto err;
+ if (value != INTEGRITY_CHECKWORD_VALUE)
+ return 1;
+
+ /* Read SYSCFG structure offset. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
+ CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ goto err;
+ address = 0x800 + (int) value; /* Address of SYSCFG structure. */
+
+ /* Read NET CONFIG structure offset. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
+ CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ goto err;
+ address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
+ address += 12; /* Address of NET INTERFACE CONFIG structure. */
+
+ /* Read NET INTERFACE CONFIG 2 structure offset. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
+ CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ goto err;
+ address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE
+ * CONFIG 2 structure. */
+
+ /* Read MAC address. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
+ CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
+ goto err;
+
+ buf[0] = mac[0] >> 24;
+ buf[1] = mac[0] >> 16;
+ buf[2] = mac[0] >> 8;
+ buf[3] = mac[0];
+ buf[4] = mac[1] >> 24;
+ buf[5] = mac[1] >> 16;
+
+ return 0;
+
+err:
+ printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+ return 1;
+}
+
+/* Platform dependent initialisation. */
+int misc_init_r(void)
+{
+ int i;
+ u_int8_t i2cbuf;
+ u_int8_t env_enetaddr[6], eeprom_enetaddr[6];
+ char *tmp = getenv("ethaddr");
+ char *end;
+ int clk;
+
+ /* EMIF-A CS3 configuration for FPGA. */
+ REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
+
+ clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
+
+ printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2);
+ printf("DDR Clock: %dMHz\n", (clk / 2));
+
+ /* Configure I2C switch (PCA9543) to enable channel 0. */
+ i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
+ if (i2c_write(CFG_I2C_PCA9543_ADDR, 0,
+ CFG_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
+ printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
+ return 1;
+ }
+
+ /* Read Ethernet MAC address from the U-Boot environment. */
+ for (i = 0; i < 6; i++) {
+ env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+
+ /* Read Ethernet MAC address from EEPROM. */
+ if (read_mac_address(eeprom_enetaddr) == 0) {
+ if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
+ memcmp(env_enetaddr, eeprom_enetaddr, 6) != 0) {
+ printf("\nWarning: MAC addresses don't match:\n");
+ printf("\tHW MAC address: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ eeprom_enetaddr[0], eeprom_enetaddr[1],
+ eeprom_enetaddr[2], eeprom_enetaddr[3],
+ eeprom_enetaddr[4], eeprom_enetaddr[5]);
+ printf("\t\"ethaddr\" value: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ env_enetaddr[0], env_enetaddr[1],
+ env_enetaddr[2], env_enetaddr[3],
+ env_enetaddr[4], env_enetaddr[5]) ;
+ debug("### Set MAC addr from environment\n");
+ memcpy(eeprom_enetaddr, env_enetaddr, 6);
+ }
+ if (!tmp) {
+ char ethaddr[20];
+
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ eeprom_enetaddr[0], eeprom_enetaddr[1],
+ eeprom_enetaddr[2], eeprom_enetaddr[3],
+ eeprom_enetaddr[4], eeprom_enetaddr[5]) ;
+ debug("### Set environment from HW MAC addr = \"%s\"\n",
+ ethaddr);
+ setenv("ethaddr", ethaddr);
+ }
+ }
+
+ if (!eth_hw_init()) {
+ printf("Ethernet init failed\n");
+ } else {
+ printf("ETH PHY: %s\n", phy.name);
+ }
+
+ /* On this platform, U-Boot is copied in RAM by the UBL,
+ * so we are always in the relocated state. */
+ gd->flags |= GD_FLG_RELOC;
+
+ return(0);
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
#ifdef CONFIG_PCI
#include <pci.h>
#endif
+#ifdef CONFIG_OF_LIBFDT
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
/*
* I/O Port configuration table
pci_mpc8250_init(&hose);
}
#endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_blob_update(void *blob, bd_t *bd)
+{
+ int ret;
+
+ ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ if (ret < 0) {
+ printf("ft_blob_update(): cannot set /memory/reg "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_blob_update(blob, bd);
+}
+#endif
ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
if (ret < 0) {
- printf("ft_blob_update): cannot set /memory/reg "
+ printf("ft_blob_update(): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
}
ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
sizeof(memory_data));
if (ret < 0)
- printf("ft_blob_update): cannot set /memory/reg "
+ printf("ft_blob_update(): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
else {
ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
sizeof(flash_data));
if (ret < 0)
- printf("ft_blob_update): cannot set /localbus/ranges "
+ printf("ft_blob_update(): cannot set /localbus/ranges "
"property err:%s\n", fdt_strerror(ret));
}
else {
ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
sizeof(uchar) * 6);
if (ret < 0)
- printf("ft_blob_update): cannot set /soc/cpm/ethernet/mac-address "
+ printf("ft_blob_update(): cannot set /soc/cpm/ethernet/mac-address "
"property err:%s\n", fdt_strerror(ret));
}
else {
ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
sizeof(memory_data));
if (ret < 0)
- printf("ft_blob_update): cannot set /memory/reg "
+ printf("ft_blob_update(): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
else {
ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
sizeof(flash_data));
if (ret < 0)
- printf("ft_blob_update): cannot set /localbus/ranges "
+ printf("ft_blob_update(): cannot set /localbus/ranges "
"property err:%s\n", fdt_strerror(ret));
}
else {
ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data,
sizeof(brg_data));
if (ret < 0)
- printf("ft_blob_update): cannot set /soc/cpm/brg-frequency "
+ printf("ft_blob_update(): cannot set /soc/cpm/brg-frequency "
"property err:%s\n", fdt_strerror(ret));
}
else {
ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
sizeof(uchar) * 6);
if (ret < 0)
- printf("ft_blob_update): cannot set /soc/cpm/scc/mac-address "
+ printf("ft_blob_update(): cannot set /soc/cpm/scc/mac-address "
"property err:%s\n", fdt_strerror(ret));
}
else {
LIB = $(obj)lib$(BOARD).a
-OBJS := mpr2.o
+COBJS := mpr2.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
LIB = $(obj)lib$(BOARD).a
-OBJS := ms7720se.o
+COBJS := ms7720se.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
int board_init(void)
{
-
return 0;
}
LIB = $(obj)lib$(BOARD).a
-OBJS := ms7722se.o
+COBJS := ms7722se.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
/*
- * Copyright (C) 2007
+ * Copyright (C) 2007,2008
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* Copyright (C) 2007
return 0;
}
-int dram_init (void)
+int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
-void led_set_state (unsigned short value)
+void led_set_state(unsigned short value)
{
- *((volatile unsigned short *) LED_BASE) = (value & 0xFF);
+ writew(value & 0xFF, LED_BASE);
}
LIB = $(obj)lib$(BOARD).a
-OBJS := ms7750se.o
+COBJS := ms7750se.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
LIB = $(obj)lib$(BOARD).a
-OBJS := r2dplus.o
+COBJS := r2dplus.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
#include <common.h>
#include <ide.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <asm/pci.h>
int checkboard(void)
return 0;
}
-int dram_init (void)
+int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
-#define FPGA_BASE 0xA4000000
-#define FPGA_CFCTL (FPGA_BASE + 0x04)
-#define FPGA_CFPOW (FPGA_BASE + 0x06)
-#define FPGA_CFCDINTCLR (FPGA_BASE + 0x2A)
+#define FPGA_BASE 0xA4000000
+#define FPGA_CFCTL (FPGA_BASE + 0x04)
+#define CFCTL_EN (0x432)
+#define FPGA_CFPOW (FPGA_BASE + 0x06)
+#define CFPOW_ON (0x02)
+#define FPGA_CFCDINTCLR (FPGA_BASE + 0x2A)
+#define CFCDINTCLR_EN (0x01)
-void ide_set_reset (int idereset)
+void ide_set_reset(int idereset)
{
/* if reset = 1 IDE reset will be asserted */
- if (idereset){
- (*(vu_short *)FPGA_CFCTL) = 0x432;
- (*(vu_short *)FPGA_CFPOW) |= 0x02;
- (*(vu_short *)FPGA_CFCDINTCLR) = 0x01;
+ if (idereset) {
+ outw(CFCTL_EN, FPGA_CFCTL); /* CF enable */
+ outw(inw(FPGA_CFPOW)|CFPOW_ON, FPGA_CFPOW); /* Power OM */
+ outw(CFCDINTCLR_EN, FPGA_CFCDINTCLR); /* Int clear */
}
}
-#if defined(CONFIG_PCI)
static struct pci_controller hose;
void pci_init_board(void)
{
- pci_sh7751_init( &hose );
+ pci_sh7751_init(&hose);
}
-#endif /* CONFIG_PCI */
LIB = $(obj)lib$(BOARD).a
-OBJS := r7780mp.o
+COBJS := r7780mp.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
int board_init(void)
{
/* SCIF Enable */
- *(vu_short*)PHCR = 0x0000;
+ writew(0x0, PHCR);
return 0;
}
-int dram_init (void)
+int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
-void led_set_state (unsigned short value)
+void led_set_state(unsigned short value)
{
}
-void ide_set_reset (int idereset)
+void ide_set_reset(int idereset)
{
/* if reset = 1 IDE reset will be asserted */
- if (idereset){
- (*(vu_short *)FPGA_CFCTL) = 0x432;
+ if (idereset) {
+ writew(0x432, FPGA_CFCTL);
#if defined(CONFIG_R7780MP)
- (*(vu_short *)FPGA_CFPOW) |= 0x01;
+ writew(inw(FPGA_CFPOW)|0x01, FPGA_CFPOW);
#else
- (*(vu_short *)FPGA_CFPOW) |= 0x02;
+ writew(inw(FPGA_CFPOW)|0x02, FPGA_CFPOW);
#endif
- (*(vu_short *)FPGA_CFCDINTCLR) = 0x01;
+ writew(0x01, FPGA_CFCDINTCLR);
}
}
-#if defined(CONFIG_PCI)
static struct pci_controller hose;
void pci_init_board(void)
{
- pci_sh7780_init( &hose );
+ pci_sh7780_init(&hose);
}
-#endif
LIB = $(obj)lib$(BOARD).a
-OBJS := sh7763rdp.o
+COBJS := sh7763rdp.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
{
vu_short dat;
- *(vu_short *)(CPU_CMDREG) |= 0x0001;
+ /* Enable mode */
+ writew(inw(CPU_CMDREG)|0x0001, CPU_CMDREG);
/* GPIO Setting (eth1) */
- dat = *(vu_short *)(PSEL1);
- *(vu_short *)PSEL1 = ((dat & ~0xff00) | 0x2400);
- *(vu_short *)PFCR = 0;
- *(vu_short *)PGCR = 0;
- *(vu_short *)PHCR = 0;
+ dat = inw(PSEL1);
+ writew(((dat & ~0xff00) | 0x2400), PSEL1);
+ writew(0, PFCR);
+ writew(0, PGCR);
+ writew(0, PHCR);
return 0;
}
-int dram_init (void)
+int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
-void led_set_state (unsigned short value)
+void led_set_state(unsigned short value)
{
}
if (err == -FDT_ERR_BADVERSION) {
if (fdt_version(working_fdt) <
FDT_FIRST_SUPPORTED_VERSION) {
- printf (" - too old, fdt $d < %d",
+ printf (" - too old, fdt %d < %d",
fdt_version(working_fdt),
FDT_FIRST_SUPPORTED_VERSION);
working_fdt = NULL;
}
if (fdt_last_comp_version(working_fdt) >
FDT_LAST_SUPPORTED_VERSION) {
- printf (" - too new, fdt $d > %d",
+ printf (" - too new, fdt %d > %d",
fdt_version(working_fdt),
FDT_LAST_SUPPORTED_VERSION);
working_fdt = NULL;
newp = newval[++stridx];
}
if (*newp != ']') {
- printf("Unexpected character '%c'\n", *newval);
+ printf("Unexpected character '%c'\n", *newp);
return 1;
}
} else {
}
break;
case FDT_NOP:
- printf("/* NOP */\n", &tabs[MAX_LEVEL - level]);
+ printf("%s/* NOP */\n", &tabs[MAX_LEVEL - level]);
break;
case FDT_END:
return 1;
extern uchar env_get_char_spec(int);
static uchar env_get_char_init (int index);
-uchar (*env_get_char)(int) = env_get_char_init;
/************************************************************************
* Default settings to be used when no valid environment is found
}
#endif
+uchar env_get_char (int index)
+{
+ uchar c;
+
+ /* if relocated to RAM */
+ if (gd->flags & GD_FLG_RELOC)
+ c = env_get_char_memory(index);
+ else
+ c = env_get_char_init(index);
+
+ return (c);
+}
+
uchar *env_get_addr (int index)
{
if (gd->env_valid) {
}
}
+void set_default_env(void)
+{
+ if (sizeof(default_environment) > ENV_SIZE) {
+ puts ("*** Error - default environment is too large\n\n");
+ return;
+ }
+
+ memset(env_ptr, 0, sizeof(env_t));
+ memcpy(env_ptr->data, default_environment,
+ sizeof(default_environment));
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+ env_ptr->flags = 0xFF;
+#endif
+ env_crc_update ();
+ gd->env_valid = 1;
+}
+
void env_relocate (void)
{
DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__,
DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
#endif
- /*
- * After relocation to RAM, we can always use the "memory" functions
- */
- env_get_char = env_get_char_memory;
-
if (gd->env_valid == 0) {
#if defined(CONFIG_GTH) || defined(CFG_ENV_IS_NOWHERE) /* Environment not changable */
puts ("Using default environment\n\n");
puts ("*** Warning - bad CRC, using default environment\n\n");
show_boot_progress (-60);
#endif
-
- if (sizeof(default_environment) > ENV_SIZE)
- {
- puts ("*** Error - default environment is too large\n\n");
- return;
- }
-
- memset (env_ptr, 0, sizeof(env_t));
- memcpy (env_ptr->data,
- default_environment,
- sizeof(default_environment));
-#ifdef CFG_REDUNDAND_ENVIRONMENT
- env_ptr->flags = 0xFF;
-#endif
- env_crc_update ();
- gd->env_valid = 1;
+ set_default_env();
}
else {
env_relocate_spec ();
/* this is called before nand_init()
* so we can't read Nand to validate env data.
* Mark it OK for now. env_relocate() in env_common.c
- * will call our relocate function which will does
- * the real validation.
+ * will call our relocate function which does the real
+ * validation.
*
* When using a NAND boot image (like sequoia_nand), the environment
* can be embedded or attached to the U-Boot image in NAND flash. This way
puts ("Writing to Nand... ");
total = CFG_ENV_SIZE;
- if (writeenv(CFG_ENV_OFFSET, env_ptr)) {
+ if (writeenv(CFG_ENV_OFFSET, (u_char *) env_ptr)) {
puts("FAILED!\n");
return 1;
}
int ret;
total = CFG_ENV_SIZE;
- ret = readenv(CFG_ENV_OFFSET, env_ptr);
+ ret = readenv(CFG_ENV_OFFSET, (u_char *) env_ptr);
if (ret || total != CFG_ENV_SIZE)
return use_default();
static void use_default()
{
puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
-
- if (default_environment_size > CFG_ENV_SIZE){
- puts ("*** Error - default environment is too large\n\n");
- return;
- }
-
- memset (env_ptr, 0, sizeof(env_t));
- memcpy (env_ptr->data,
- default_environment,
- default_environment_size);
- env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE);
- gd->env_valid = 1;
-
+ set_default_env();
}
#endif
*/
#define putnstr(str,n) do { \
- printf ("%.*s", n, str); \
+ printf ("%.*s", (int)n, str); \
} while (0)
#define CTL_CH(c) ((c) - 'a' + 1)
#include <common.h>
#include <at91rm9200_net.h>
#include <net.h>
+#include <miiphy.h>
#include <lxt971a.h>
#ifdef CONFIG_DRIVER_ETHER
unsigned short Id1, Id2;
at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_ID1, &Id1);
- at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_ID2, &Id2);
+ at91rm9200_EmacReadPhy(p_mac, PHY_PHYIDR1, &Id1);
+ at91rm9200_EmacReadPhy(p_mac, PHY_PHYIDR2, &Id2);
at91rm9200_EmacDisableMDIO (p_mac);
if ((Id1 == (0x0013)) && ((Id2 & 0xFFF0) == 0x78E0))
unsigned short value;
/* Set lxt972 control register */
- if (!at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_CTRL, &value))
+ if (!at91rm9200_EmacReadPhy (p_mac, PHY_BMCR, &value))
return FALSE;
/* Restart Auto_negotiation */
- value |= PHY_COMMON_CTRL_RES_AUTO;
- if (!at91rm9200_EmacWritePhy (p_mac, PHY_COMMON_CTRL, &value))
+ value |= PHY_BMCR_RST_NEG;
+ if (!at91rm9200_EmacWritePhy (p_mac, PHY_BMCR, &value))
return FALSE;
/*check AutoNegotiate complete */
udelay (10000);
- at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_STAT, &value);
- if (!(value & PHY_COMMON_STAT_AN_COMP))
+ at91rm9200_EmacReadPhy(p_mac, PHY_BMSR, &value);
+ if (!(value & PHY_BMSR_AUTN_COMP))
return FALSE;
return (lxt972_GetLinkSpeed (p_mac));
#include <common.h>
#include <net.h>
+#include <miiphy.h>
#include <lxt971a.h>
#include <asm/arch/emac_defs.h>
int lxt972_is_phy_connected(int phy_addr)
{
- u_int16_t id1, id2;
+ u_int16_t id1, id2;
- if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID1, &id1))
+ if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
return(0);
- if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID2, &id2))
+ if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
return(0);
if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
int lxt972_get_link_speed(int phy_addr)
{
- u_int16_t stat1, tmp;
- volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
+ u_int16_t stat1, tmp;
+ volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
return(0);
if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
-
/* Speed doesn't matter, there is no setting for it in EMAC... */
- if (stat1 & PHY_LXT971_STAT2_100BTX) {
- if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
- /* set DM644x EMAC for Full Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
- } else {
- /*set DM644x EMAC for Half Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
- }
-
- return(1);
+ if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
+ EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
} else {
- if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
- /* set DM644x EMAC for Full Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
- } else {
- /*set DM644x EMAC for Half Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
- }
-
- return(1);
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
}
- return(0);
+ return(1);
}
int lxt972_init_phy(int phy_addr)
{
- int ret = 1;
+ int ret = 1;
if (!lxt972_get_link_speed(phy_addr)) {
/* Try another time */
int lxt972_auto_negotiate(int phy_addr)
{
- u_int16_t tmp;
-
+ u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_CTRL, &tmp))
+ if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
- tmp |= PHY_COMMON_CTRL_RES_AUTO;
- dm644x_eth_phy_write(phy_addr, PHY_COMMON_CTRL, tmp);
+ tmp |= PHY_BMCR_RST_NEG;
+ dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_STAT, &tmp))
+ if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
return(0);
- if (!(tmp & PHY_COMMON_STAT_AN_COMP))
+ if (!(tmp & PHY_BMSR_AUTN_COMP))
return(0);
return (lxt972_get_link_speed(phy_addr));
return 0;
case 1:
/* Uncorrectable error */
- DEBUG (MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "ECC UNCORRECTED_ERROR 1\n");
return(-1);
case 12:
/* Correctable error */
find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
- DEBUG (MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at offset: %d, bit: %d\n", find_byte, find_bit);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "Correcting single bit ECC "
+ "error at offset: %d, bit: %d\n",
+ find_byte, find_bit);
page_data[find_byte] ^= (1 << find_bit);
if (ecc_calc[0] == 0 && ecc_calc[1] == 0 && ecc_calc[2] == 0)
return(0);
}
- DEBUG (MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "UNCORRECTED_ERROR default\n");
return(-1);
}
}
COBJS-y += cache.o
COBJS-y += interrupts.o
COBJS-y += pio.o
-COBJS-$(CONFIG_MMC) += atmel_mci.o
SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
#include <mpc8260.h>
#include <asm/m8260_pci.h>
#include <asm/io.h>
+#ifdef CONFIG_OF_LIBFDT
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
DECLARE_GLOBAL_DATA_PTR;
immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
}
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
+ "clock-frequency", bd->pci_clk, 1);
+}
+#endif
+
#endif /* CONFIG_PCI */
return ((int)dma_check());
}
#endif /*CONFIG_DDR_ECC*/
+
+#ifdef CONFIG_TSEC_ENET
+/* Default initializations for TSEC controllers. To override,
+ * create a board-specific function called:
+ * int board_eth_init(bd_t *bis)
+ */
+
+extern int tsec_initialize(bd_t * bis, int index, char *devname);
+
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_TSEC1)
+ tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
+#endif
+#if defined(CONFIG_TSEC2)
+ tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
+#endif
+ return 0;
+}
+#endif
}
out_be32(mxmr, loopval); /* OP_NORMAL */
}
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIGMPC85XX_FEC)
+/* Default initializations for TSEC controllers. To override,
+ * create a board-specific function called:
+ * int board_eth_init(bd_t *bis)
+ */
+
+extern int tsec_initialize(bd_t * bis, int index, char *devname);
+
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_TSEC1)
+ tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
+#endif
+#if defined(CONFIG_TSEC2)
+ tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
+#endif
+#if defined(CONFIG_MPC85XX_FEC)
+ tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME);
+#else
+#if defined(CONFIG_TSEC3)
+ tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
+#endif
+#if defined(CONFIG_TSEC4)
+ tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
+#endif
+#endif
+ return 0;
+}
+#endif
if (machinecheck_count > 1) {
regs->nip += 4; /* skip offending instruction */
- printf("Skipping current instr, Returning to 0x%08x\n",
+ printf("Skipping current instr, Returning to 0x%08lx\n",
regs->nip);
} else {
- printf("Returning back to 0x%08x\n",regs->nip);
+ printf("Returning back to 0x%08lx\n",regs->nip);
}
}
printf("External Interrupt Exception at PC: %lx, SR: %lx, vector=%lx",
regs->nip, regs->msr, regs->trap);
vect = pic->iack0;
- printf(" irq IACK0@%05x=%d\n",&pic->iack0,vect);
+ printf(" irq IACK0@%05x=%d\n",(int)&pic->iack0,vect);
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
machinecheck_count++;
printf("Returning back to 0x%08x\n",regs->nip);
#else
regs->nip += 4; /* skip offending instruction */
- printf("Skipping current instr, Returning to 0x%08x\n",regs->nip);
+ printf("Skipping current instr, Returning to 0x%08lx\n",regs->nip);
#endif
}
printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
}
+
+#ifdef CONFIG_TSEC_ENET
+/* Default initializations for TSEC controllers. To override,
+ * create a board-specific function called:
+ * int board_eth_init(bd_t *bis)
+ */
+
+extern int tsec_initialize(bd_t * bis, int index, char *devname);
+
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_TSEC1)
+ tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
+#endif
+#if defined(CONFIG_TSEC2)
+ tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
+#endif
+#if defined(CONFIG_TSEC3)
+ tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
+#endif
+#if defined(CONFIG_TSEC4)
+ tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
+#endif
+ return 0;
+}
+#endif /* CONFIG_TSEC_ENET */
copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
+ cmp r0, r2 /* until source end address [r2] */
ble copy_loop
#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
LIB = $(obj)lib$(CPU).a
SOBJS = start.o
-OBJS = cpu.o interrupts.o watchdog.o time.o cache.o
+COBJS = cpu.o interrupts.o watchdog.o time.o cache.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
LIB = $(obj)lib$(CPU).a
SOBJS = start.o
-OBJS = cpu.o interrupts.o watchdog.o time.o cache.o
+COBJS = cpu.o interrupts.o watchdog.o time.o cache.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libmmc.a
+
+COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
#define MANUFACTURER_SST 0x00BF
/* AMD */
-#define AM29DL800BB 0x22C8
+#define AM29DL800BB 0x22CB
#define AM29DL800BT 0x224A
#define AM29F800BB 0x2258
status = this->waitfunc (mtd, this, FL_WRITING);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "%s: Failed write, page 0x%08x, ",
+ __FUNCTION__, page);
return -EIO;
}
} else {
for (j = 0; j < eccsteps; j++) {
/* Loop through and verify the data */
if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "%s: "
+ "Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
goto out;
}
datidx += mtd->eccsize;
if (!hweccbytes)
continue;
if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "%s: "
+ "Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
goto out;
}
oobofs += hweccbytes;
*/
if (oobmode) {
if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "%s: "
+ "Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
goto out;
}
} else {
for (i = 0; i < ecccnt; i++) {
int idx = oobsel->eccpos[i];
if (oobdata[idx] != oob_buf[oobofs + idx] ) {
- DEBUG (MTD_DEBUG_LEVEL0,
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
"%s: Failed ECC write "
- "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
+ "verify, page 0x%08x, "
+ "%6i bytes were succesful\n",
+ __FUNCTION__, page, i);
goto out;
}
}
int oobreadlen;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n",
+ (unsigned int) from, (int) len);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_read_ecc: Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
* generator for an error, reads back the syndrome and
* does the error correction on the fly */
if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
ecc_failed++;
}
}
if (ecc_status == -1) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
+ "Failed ECC read, page 0x%08x\n",
+ page);
ecc_failed++;
}
}
struct nand_chip *this = mtd->priv;
int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n",
+ (unsigned int) from, (int) len);
/* Shift to get page */
page = (int)(from >> this->page_shift);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_read_oob: Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_read_raw: Attempt read beyond end of device\n");
return -EINVAL;
}
u_char *oobbuf, *bufstart;
int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
- DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n",
+ (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow write past end of device */
if ((to + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_write_ecc: Attempt to write past end of page\n");
return -EINVAL;
}
*/
ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));
if (ret) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_write_ecc: write_page failed %d\n", ret);
goto out;
}
/* Next oob page */
page - startpage,
oobbuf, oobsel, chipnr, (eccbuf != NULL));
if (ret) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: "
+ "verify_pages failed %d\n", ret);
goto out;
}
*retlen = written;
if (!ret)
*retlen = written;
else
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_write_ecc: verify_pages failed %d\n", ret);
out:
/* Deselect and wake up anyone waiting on the device */
int column, page, status, ret = -EIO, chipnr;
struct nand_chip *this = mtd->priv;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
+ (unsigned int) to, (int) len);
/* Shift to get page */
page = (int) (to >> this->page_shift);
/* Do not allow write past end of page */
if ((column + len) > mtd->oobsize) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Attempt to write past end of page\n");
return -EINVAL;
}
this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
if (!ffchars) {
if (!(ffchars = kmalloc (mtd->oobsize, GFP_KERNEL))) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "No memory for padding array, need %d bytes", mtd->oobsize);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "No memory for padding array, "
+ "need %d bytes", mtd->oobsize);
ret = -ENOMEM;
goto out;
}
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Failed write, page 0x%08x\n", page);
ret = -EIO;
goto out;
}
this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask);
if (this->verify_buf(mtd, buf, len)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Failed write verify, page 0x%08x\n", page);
ret = -EIO;
goto out;
}
for (i = 0; i < count; i++)
total_len += (int) vecs[i].iov_len;
- DEBUG (MTD_DEBUG_LEVEL3,
- "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
+ MTDDEBUG (MTD_DEBUG_LEVEL3,
+ "nand_writev: to = 0x%08x, len = %i, count = %ld\n",
+ (unsigned int) to, (unsigned int) total_len, count);
/* Do not allow write past end of page */
if ((to + total_len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_writev: Attempted write past end of device\n");
return -EINVAL;
}
int page, len, status, pages_per_block, ret, chipnr;
struct nand_chip *this = mtd->priv;
- DEBUG (MTD_DEBUG_LEVEL3,
- "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n",
+ (unsigned int) instr->addr, (unsigned int) instr->len);
/* Start address must align on block boundary */
if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_erase: Length not block aligned\n");
return -EINVAL;
}
/* Do not allow erase past end of device */
if ((instr->len + instr->addr) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_erase: Erase past end of device\n");
return -EINVAL;
}
/* Check the WP bit */
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "nand_erase: Device is write protected!!!\n");
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
/* See if block erase succeeded */
if (status & 0x01) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: "
+ "Failed erase, page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = (page << this->page_shift);
goto erase_exit;
{
struct nand_chip *this = mtd->priv;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
/* Grab the lock and see if the device is available */
nand_get_device (this, mtd, FL_SYNCING);
block = (int) (offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, res, block >> 1);
+ MTDDEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: "
+ "(block %d) 0x%02x\n", (unsigned int)offs, res, block >> 1);
switch ((int)res) {
case 0x00: return 0;
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_wait: controller error = 0x%04x\n", ctrl);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_wait: controller error = 0x%04x\n", ctrl);
return -EAGAIN;
}
if (ctrl & ONENAND_CTRL_LOCK) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_wait: it's locked error = 0x%04x\n", ctrl);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_wait: it's locked error = 0x%04x\n", ctrl);
return -EIO;
}
if (interrupt & ONENAND_INT_READ) {
ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc & ONENAND_ECC_2BIT_ALL) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_wait: ECC error = 0x%04x\n", ecc);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_wait: ECC error = 0x%04x\n", ecc);
return -EBADMSG;
}
}
int thislen;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n",
- (unsigned int)from, (int)len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_read_ecc: "
+ "from = 0x%08x, len = %i\n",
+ (unsigned int)from, (int)len);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_read_ecc: Attempt read beyond end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_read_ecc: "
+ "Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
break;
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_read_ecc: read failed = %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_read_ecc: read failed = %d\n", ret);
break;
}
int read = 0, thislen, column;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n",
- (unsigned int)from, (int)len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_read_oob: "
+ "from = 0x%08x, len = %i\n",
+ (unsigned int)from, (int)len);
/* Initialize return length value */
*retlen = 0;
/* Do not allow reads past end of device */
if (unlikely((from + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_read_oob: Attempt read beyond end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_read_oob: "
+ "Attempt read beyond end of device\n");
return -EINVAL;
}
break;
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_read_oob: read failed = %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_read_oob: read failed = %d\n", ret);
break;
}
int written = 0;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n",
- (unsigned int)to, (int)len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_write_ecc: "
+ "to = 0x%08x, len = %i\n",
+ (unsigned int)to, (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_write_ecc: Attempt write to past end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_ecc: "
+ "Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_write_ecc: Attempt to write not page aligned data\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_ecc: "
+ "Attempt to write not page aligned data\n");
return -EINVAL;
}
ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_write_ecc: write filaed %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_write_ecc: write filaed %d\n", ret);
break;
}
/* Only check verify write turn on */
ret = onenand_verify_page(mtd, (u_char *) buf, to, block, page);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_write_ecc: verify failed %d\n", ret);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_write_ecc: verify failed %d\n", ret);
break;
}
int column, status;
int written = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n",
- (unsigned int)to, (int)len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_write_oob: "
+ "to = 0x%08x, len = %i\n",
+ (unsigned int)to, (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_write_oob: Attempt write to past end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_oob: "
+ "Attempt write to past end of device\n");
return -EINVAL;
}
int len;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n",
- (unsigned int)instr->addr, (unsigned int)instr->len);
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n",
+ (unsigned int)instr->addr, (unsigned int)instr->len);
block_size = (1 << this->erase_shift);
/* Start address must align on block boundary */
if (unlikely(instr->addr & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
if (unlikely(instr->len & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_erase: Length not block aligned\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_erase: Length not block aligned\n");
return -EINVAL;
}
/* Do not allow erase past end of device */
if (unlikely((instr->len + instr->addr) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_erase: Erase past end of device\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "onenand_erase: Erase past end of device\n");
return -EINVAL;
}
/* Check, if it is write protected */
if (ret) {
if (ret == -EPERM)
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_erase: Device is write protected!!!\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: "
+ "Device is write protected!!!\n");
else
- DEBUG(MTD_DEBUG_LEVEL0,
- "onenand_erase: Failed erase, block %d\n",
- (unsigned)(addr >> this->erase_shift));
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: "
+ "Failed erase, block %d\n",
+ (unsigned)(addr >> this->erase_shift));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
*/
void onenand_sync(struct mtd_info *mtd)
{
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_SYNCING);
block = (int)(offs >> (bbm->bbt_erase_shift - 1));
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2,
- "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ MTDDEBUG (MTD_DEBUG_LEVEL2,
+ "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
case 0x00:
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
+COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82544GC_LOM},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_COPPER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545GM_COPPER},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_COPPER},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_FIBER},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_FIBER},
hw->mac_type = e1000_82540;
break;
case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545GM_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
hw->mac_type = e1000_82545;
break;
#define E1000_DEV_ID_82544GC_LOM 0x100D
#define E1000_DEV_ID_82540EM 0x100E
#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
#define E1000_DEV_ID_82545EM_COPPER 0x100F
#define E1000_DEV_ID_82545EM_FIBER 0x1011
#define E1000_DEV_ID_82546EB_COPPER 0x1010
#define E1000_DEV_ID_82546EB_FIBER 0x1012
#define E1000_DEV_ID_82541ER 0x1078
#define E1000_DEV_ID_82541GI_LF 0x107C
-#define NUM_DEV_IDS 15
+#define NUM_DEV_IDS 16
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
#define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t))
-u8 dev_addr[6];
-
#define PCNET_CMD 0x00
#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
{
int i, r;
- PRINTK("nic base is %lx\n", nic_base);
+ PRINTK("nic base is %lx\n", nic.base);
n2k_outb(E8390_NODMA + E8390_PAGE0+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+ PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+ PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+ PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
return 0;
}
-u32 nic_base;
-
/* U-boot specific routines */
static u8 *pbuf = NULL;
int eth_init(bd_t *bd) {
int r;
+ u8 dev_addr[6];
char ethaddr[20];
PRINTK("### eth_init\n");
}
#endif
- nic_base = CONFIG_DRIVER_NE2000_BASE;
nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
r = get_prom(dev_addr);
ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
/* reset PHY */
- ns7520_mii_write(PHY_COMMON_CTRL, PHY_COMMON_CTRL_RESET);
- ns7520_mii_write(PHY_COMMON_CTRL, 0);
+ ns7520_mii_write(PHY_BMCR, PHY_BMCR_RESET);
+ ns7520_mii_write(PHY_BMCR, 0);
udelay(3000); /* [2] p.70 says at least 300us reset recovery time. */
/* run auto-negotation */
/* define what we are capable of */
- ns7520_mii_write(PHY_COMMON_AUTO_ADV,
- PHY_COMMON_AUTO_ADV_100BTXFD |
- PHY_COMMON_AUTO_ADV_100BTX |
- PHY_COMMON_AUTO_ADV_10BTFD |
- PHY_COMMON_AUTO_ADV_10BT |
- PHY_COMMON_AUTO_ADV_802_3);
+ ns7520_mii_write(PHY_ANAR,
+ PHY_ANLPAR_TXFD |
+ PHY_ANLPAR_TX |
+ PHY_ANLPAR_10FD |
+ PHY_ANLPAR_10 |
+ PHY_ANLPAR_PSB_802_3);
/* start auto-negotiation */
- ns7520_mii_write(PHY_COMMON_CTRL,
- PHY_COMMON_CTRL_AUTO_NEG |
- PHY_COMMON_CTRL_RES_AUTO);
+ ns7520_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
/* wait for completion */
ulStartJiffies = get_timer(0);
while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) {
- uiStatus = ns7520_mii_read(PHY_COMMON_STAT);
+ uiStatus = ns7520_mii_read(PHY_BMSR);
if ((uiStatus &
- (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT))
- ==
- (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) {
+ (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
+ (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
/* lucky we are, auto-negotiation succeeded */
ns7520_link_print_changed();
ns7520_link_update_egcr();
DEBUG_FN(DEBUG_LINK);
- uiControl = ns7520_mii_read(PHY_COMMON_CTRL);
+ uiControl = ns7520_mii_read(PHY_BMCR);
- if ((uiControl & PHY_COMMON_CTRL_AUTO_NEG) ==
- PHY_COMMON_CTRL_AUTO_NEG) {
- /* PHY_COMMON_STAT_LNK_STAT is only set on autonegotiation */
- uiStatus = ns7520_mii_read(PHY_COMMON_STAT);
+ if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
+ /* PHY_BMSR_LS is only set on autonegotiation */
+ uiStatus = ns7520_mii_read(PHY_BMSR);
- if (!(uiStatus & PHY_COMMON_STAT_LNK_STAT)) {
+ if (!(uiStatus & PHY_BMSR_LS)) {
printk(KERN_WARNING NS7520_DRIVER_NAME
": link down\n");
/* @TODO Linux: carrier_off */
DEBUG_FN(DEBUG_MII);
- phyDetected = (PhyType) uiID1 = ns7520_mii_read(PHY_COMMON_ID1);
+ phyDetected = (PhyType) uiID1 = ns7520_mii_read(PHY_PHYIDR1);
switch (phyDetected) {
case PHY_LXT971A:
szName = "LXT971A";
- uiID2 = ns7520_mii_read(PHY_COMMON_ID2);
+ uiID2 = ns7520_mii_read(PHY_PHYIDR2);
nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
cRes = 1;
break;
#include "ns9750_eth.h" /* for Ethernet and PHY */
-/* some definition to make transistion to linux easier */
+/* some definition to make transition to linux easier */
#define NS9750_DRIVER_NAME "eth"
#define KERN_WARNING "Warning:"
ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
/* reset PHY */
- ns9750_mii_write (PHY_COMMON_CTRL, PHY_COMMON_CTRL_RESET);
- ns9750_mii_write (PHY_COMMON_CTRL, 0);
+ ns9750_mii_write(PHY_BMCR, PHY_BMCR_RESET);
+ ns9750_mii_write(PHY_BMCR, 0);
/* @TODO check time */
udelay (3000); /* [2] p.70 says at least 300us reset recovery time. But
DEBUG_FN (DEBUG_LINK);
- uiControl = ns9750_mii_read (PHY_COMMON_CTRL);
- uiControl &= ~(PHY_COMMON_CTRL_SPD_MA |
- PHY_COMMON_CTRL_AUTO_NEG | PHY_COMMON_CTRL_DUPLEX);
+ uiControl = ns9750_mii_read(PHY_BMCR);
+ uiControl &= ~(PHY_BMCR_SPEED_MASK |
+ PHY_BMCR_AUTON | PHY_BMCR_DPLX);
uiLastLinkStatus = 0;
if ((ucLinkMode & FS_EEPROM_AUTONEG_SPEED_MASK) ==
FS_EEPROM_AUTONEG_SPEED_100) {
- uiControl |= PHY_COMMON_CTRL_SPD_100;
+ uiControl |= PHY_BMCR_100MB;
uiLastLinkStatus |= PHY_LXT971_STAT2_100BTX;
} else
- uiControl |= PHY_COMMON_CTRL_SPD_10;
+ uiControl |= PHY_BMCR_10_MBPS;
if ((ucLinkMode & FS_EEPROM_AUTONEG_DUPLEX_MASK) ==
FS_EEPROM_AUTONEG_DUPLEX_FULL) {
- uiControl |= PHY_COMMON_CTRL_DUPLEX;
+ uiControl |= PHY_BMCR_DPLX;
uiLastLinkStatus |= PHY_LXT971_STAT2_DUPLEX_MODE;
}
- ns9750_mii_write (PHY_COMMON_CTRL, uiControl);
+ ns9750_mii_write(PHY_BMCR, uiControl);
ns9750_link_print_changed ();
ns9750_link_update_egcr ();
/* run auto-negotation */
/* define what we are capable of */
- ns9750_mii_write (PHY_COMMON_AUTO_ADV,
- PHY_COMMON_AUTO_ADV_100BTXFD |
- PHY_COMMON_AUTO_ADV_100BTX |
- PHY_COMMON_AUTO_ADV_10BTFD |
- PHY_COMMON_AUTO_ADV_10BT |
- PHY_COMMON_AUTO_ADV_802_3);
+ ns9750_mii_write(PHY_ANAR,
+ PHY_ANLPAR_TXFD |
+ PHY_ANLPAR_TX |
+ PHY_ANLPAR_10FD |
+ PHY_ANLPAR_10 |
+ PHY_ANLPAR_PSB_802_3);
/* start auto-negotiation */
- ns9750_mii_write (PHY_COMMON_CTRL,
- PHY_COMMON_CTRL_AUTO_NEG |
- PHY_COMMON_CTRL_RES_AUTO);
+ ns9750_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
/* wait for completion */
ulStartJiffies = get_ticks ();
while (get_ticks () < ulStartJiffies + NS9750_MII_NEG_DELAY) {
- uiStatus = ns9750_mii_read (PHY_COMMON_STAT);
+ uiStatus = ns9750_mii_read(PHY_BMSR);
if ((uiStatus &
- (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) ==
- (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) {
+ (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
+ (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
/* lucky we are, auto-negotiation succeeded */
ns9750_link_print_changed ();
ns9750_link_update_egcr ();
DEBUG_FN (DEBUG_LINK);
- uiControl = ns9750_mii_read (PHY_COMMON_CTRL);
+ uiControl = ns9750_mii_read(PHY_BMCR);
- if ((uiControl & PHY_COMMON_CTRL_AUTO_NEG) ==
- PHY_COMMON_CTRL_AUTO_NEG) {
- /* PHY_COMMON_STAT_LNK_STAT is only set on autonegotiation */
- uiStatus = ns9750_mii_read (PHY_COMMON_STAT);
+ if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
+ /* PHY_BMSR_LS is only set on autonegotiation */
+ uiStatus = ns9750_mii_read(PHY_BMSR);
- if (!(uiStatus & PHY_COMMON_STAT_LNK_STAT)) {
+ if (!(uiStatus & PHY_BMSR_LS)) {
printk (KERN_WARNING NS9750_DRIVER_NAME
": link down\n");
/* @TODO Linux: carrier_off */
/* mask out all uninteresting parts */
}
- /* other PHYs must store there link information in
+ /* other PHYs must store their link information in
uiStatus as PHY_LXT971 */
}
} else {
DEBUG_FN (DEBUG_MII);
- phyDetected = (PhyType) uiID1 = ns9750_mii_read (PHY_COMMON_ID1);
+ phyDetected = (PhyType) uiID1 = ns9750_mii_read(PHY_PHYIDR1);
switch (phyDetected) {
case PHY_LXT971A:
szName = "LXT971A";
- uiID2 = ns9750_mii_read (PHY_COMMON_ID2);
+ uiID2 = ns9750_mii_read(PHY_PHYIDR2);
nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
cRes = 1;
break;
--- /dev/null
+/*
+ * sh_eth.c - Driver for Renesas SH7763's ethernet controler.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (c) 2008 Nobuhiro Iwamatsu
+ * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+#include "sh_eth.h"
+
+#ifndef CONFIG_SH_ETHER_USE_PORT
+# error "Please define CONFIG_SH_ETHER_USE_PORT"
+#endif
+#ifndef CONFIG_SH_ETHER_PHY_ADDR
+# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
+#endif
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+static struct dev_info_s *dev;
+
+/*
+ * Bits are written to the PHY serially using the
+ * PIR register, just like a bit banger.
+ */
+static void sh_eth_mii_write_phy_bits(int port, u32 val, int len)
+{
+ int i;
+ u32 pir;
+
+ /* Bit positions is 1 less than the number of bits */
+ for (i = len - 1; i >= 0; i--) {
+ /* Write direction, bit to write, clock is low */
+ pir = 2 | ((val & 1 << i) ? 1 << 2 : 0);
+ outl(pir, PIR(port));
+ udelay(1);
+ /* Write direction, bit to write, clock is high */
+ pir = 3 | ((val & 1 << i) ? 1 << 2 : 0);
+ outl(pir, PIR(port));
+ udelay(1);
+ /* Write direction, bit to write, clock is low */
+ pir = 2 | ((val & 1 << i) ? 1 << 2 : 0);
+ outl(pir, PIR(port));
+ udelay(1);
+ }
+}
+
+static void sh_eth_mii_bus_release(int port)
+{
+ /* Read direction, clock is low */
+ outl(0, PIR(port));
+ udelay(1);
+ /* Read direction, clock is high */
+ outl(1, PIR(port));
+ udelay(1);
+ /* Read direction, clock is low */
+ outl(0, PIR(port));
+ udelay(1);
+}
+
+static void sh_eth_mii_ind_bus_release(int port)
+{
+ /* Read direction, clock is low */
+ outl(0, PIR(port));
+ udelay(1);
+}
+
+static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len)
+{
+ int i;
+ u32 pir;
+
+ *val = 0;
+ for (i = len - 1; i >= 0; i--) {
+ /* Read direction, clock is high */
+ outl(1, PIR(port));
+ udelay(1);
+ /* Read bit */
+ pir = inl(PIR(port));
+ *val |= (pir & 8) ? 1 << i : 0;
+ /* Read direction, clock is low */
+ outl(0, PIR(port));
+ udelay(1);
+ }
+
+ return 0;
+}
+
+#define PHY_INIT 0xFFFFFFFF
+#define PHY_READ 0x02
+#define PHY_WRITE 0x01
+/*
+ * To read a phy register, mii managements frames are sent to the phy.
+ * The frames look like this:
+ * pre (32 bits): 0xffff ffff
+ * st (2 bits): 01
+ * op (2bits): 10: read 01: write
+ * phyad (5 bits): xxxxx
+ * regad (5 bits): xxxxx
+ * ta (Bus release):
+ * data (16 bits): read data
+ */
+static u32 sh_eth_mii_read_phy_reg(int port, u8 phy_addr, int reg)
+{
+ u32 val;
+
+ /* Sent mii management frame */
+ /* pre */
+ sh_eth_mii_write_phy_bits(port, PHY_INIT, 32);
+ /* st (start of frame) */
+ sh_eth_mii_write_phy_bits(port, 0x1, 2);
+ /* op (code) */
+ sh_eth_mii_write_phy_bits(port, PHY_READ, 2);
+ /* phy address */
+ sh_eth_mii_write_phy_bits(port, phy_addr, 5);
+ /* Register to read */
+ sh_eth_mii_write_phy_bits(port, reg, 5);
+
+ /* Bus release */
+ sh_eth_mii_bus_release(port);
+
+ /* Read register */
+ sh_eth_mii_read_phy_bits(port, &val, 16);
+
+ return val;
+}
+
+/*
+ * To write a phy register, mii managements frames are sent to the phy.
+ * The frames look like this:
+ * pre (32 bits): 0xffff ffff
+ * st (2 bits): 01
+ * op (2bits): 10: read 01: write
+ * phyad (5 bits): xxxxx
+ * regad (5 bits): xxxxx
+ * ta (2 bits): 10
+ * data (16 bits): write data
+ * idle (Independent bus release)
+ */
+static void sh_eth_mii_write_phy_reg(int port, u8 phy_addr, int reg, u16 val)
+{
+ /* Sent mii management frame */
+ /* pre */
+ sh_eth_mii_write_phy_bits(port, PHY_INIT, 32);
+ /* st (start of frame) */
+ sh_eth_mii_write_phy_bits(port, 0x1, 2);
+ /* op (code) */
+ sh_eth_mii_write_phy_bits(port, PHY_WRITE, 2);
+ /* phy address */
+ sh_eth_mii_write_phy_bits(port, phy_addr, 5);
+ /* Register to read */
+ sh_eth_mii_write_phy_bits(port, reg, 5);
+ /* ta */
+ sh_eth_mii_write_phy_bits(port, PHY_READ, 2);
+ /* Write register data */
+ sh_eth_mii_write_phy_bits(port, val, 16);
+
+ /* Independent bus release */
+ sh_eth_mii_ind_bus_release(port);
+}
+
+void eth_halt(void)
+{
+}
+
+int eth_send(volatile void *packet, int len)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+ int timeout;
+ int rc = 0;
+
+ if (!packet || len > 0xffff) {
+ printf("eth_send: Invalid argument\n");
+ return -EINVAL;
+ }
+
+ /* packet must be a 4 byte boundary */
+ if ((int)packet & (4 - 1)) {
+ printf("eth_send: packet not 4 byte alligned\n");
+ return -EFAULT;
+ }
+
+ /* Update tx descriptor */
+ port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
+ port_info->tx_desc_cur->td1 = len << 16;
+ /* Must preserve the end of descriptor list indication */
+ if (port_info->tx_desc_cur->td0 & TD_TDLE)
+ port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
+ else
+ port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
+
+ /* Restart the transmitter if disabled */
+ if (!(inl(EDTRR(port)) & EDTRR_TRNS))
+ outl(EDTRR_TRNS, EDTRR(port));
+
+ /* Wait until packet is transmitted */
+ timeout = 1000;
+ while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--)
+ udelay(100);
+
+ if (timeout < 0) {
+ printf("eth_send: transmit timeout\n");
+ rc = -1;
+ goto err;
+ }
+
+err:
+ port_info->tx_desc_cur++;
+ if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
+ port_info->tx_desc_cur = port_info->tx_desc_base;
+
+ return rc;
+}
+
+int eth_rx(void)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+ int len = 0;
+ volatile u8 *packet;
+
+ /* Check if the rx descriptor is ready */
+ if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
+ /* Check for errors */
+ if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
+ len = port_info->rx_desc_cur->rd1 & 0xffff;
+ packet = (volatile u8 *)
+ ADDR_TO_P2(port_info->rx_desc_cur->rd2);
+ NetReceive(packet, len);
+ }
+
+ /* Make current descriptor available again */
+ if (port_info->rx_desc_cur->rd0 & RD_RDLE)
+ port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
+ else
+ port_info->rx_desc_cur->rd0 = RD_RACT;
+
+ /* Point to the next descriptor */
+ port_info->rx_desc_cur++;
+ if (port_info->rx_desc_cur >=
+ port_info->rx_desc_base + NUM_RX_DESC)
+ port_info->rx_desc_cur = port_info->rx_desc_base;
+ }
+
+ /* Restart the receiver if disabled */
+ if (!(inl(EDRRR(port)) & EDRRR_R))
+ outl(EDRRR_R, EDRRR(port));
+
+ return len;
+}
+
+#define EDMR_INIT_CNT 1000
+static int sh_eth_reset(struct dev_info_s *dev)
+{
+ int port = dev->port;
+ int i;
+
+ /* Start e-dmac transmitter and receiver */
+ outl(EDSR_ENALL, EDSR(port));
+
+ /* Perform a software reset and wait for it to complete */
+ outl(EDMR_SRST, EDMR(port));
+ for (i = 0; i < EDMR_INIT_CNT; i++) {
+ if (!(inl(EDMR(port)) & EDMR_SRST))
+ break;
+ udelay(1000);
+ }
+
+ if (i == EDMR_INIT_CNT) {
+ printf("Error: Software reset timeout\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int sh_eth_tx_desc_init(struct dev_info_s *dev)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+ u32 tmp_addr;
+ struct tx_desc_s *cur_tx_desc;
+ int i;
+
+ /* Allocate tx descriptors. They must be TX_DESC_SIZE bytes
+ aligned */
+ if (!(port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
+ sizeof(struct tx_desc_s) +
+ TX_DESC_SIZE - 1))) {
+ printf("Error: malloc failed\n");
+ return -ENOMEM;
+ }
+ tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
+ ~(TX_DESC_SIZE - 1));
+ /* Make sure we use a P2 address (non-cacheable) */
+ port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
+
+ port_info->tx_desc_cur = port_info->tx_desc_base;
+
+ /* Initialize all descriptors */
+ for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
+ cur_tx_desc++, i++) {
+ cur_tx_desc->td0 = 0x00;
+ cur_tx_desc->td1 = 0x00;
+ cur_tx_desc->td2 = 0x00;
+ }
+
+ /* Mark the end of the descriptors */
+ cur_tx_desc--;
+ cur_tx_desc->td0 |= TD_TDLE;
+
+ /* Point the controller to the tx descriptor list. Must use physical
+ addresses */
+ outl(ADDR_TO_PHY(port_info->tx_desc_base), TDLAR(port));
+ outl(ADDR_TO_PHY(port_info->tx_desc_base), TDFAR(port));
+ outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port));
+ outl(0x01, TDFFR(port));/* Last discriptor bit */
+
+ return 0;
+}
+
+static int sh_eth_rx_desc_init(struct dev_info_s *dev)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+ u32 tmp_addr;
+ struct rx_desc_s *cur_rx_desc;
+ u8 *rx_buf;
+ int i;
+
+ /* Allocate rx descriptors. They must be RX_DESC_SIZE bytes
+ aligned */
+ if (!(port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
+ sizeof(struct rx_desc_s) +
+ RX_DESC_SIZE - 1))) {
+ printf("Error: malloc failed\n");
+ return -ENOMEM;
+ }
+ tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
+ ~(RX_DESC_SIZE - 1));
+ /* Make sure we use a P2 address (non-cacheable) */
+ port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr);
+
+ port_info->rx_desc_cur = port_info->rx_desc_base;
+
+ /* Allocate rx data buffers. They must be 32 bytes aligned and in
+ P2 area */
+ if (!(port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE +
+ 31))) {
+ printf("Error: malloc failed\n");
+ free(port_info->rx_desc_malloc);
+ port_info->rx_desc_malloc = NULL;
+ return -ENOMEM;
+ }
+ tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) &
+ ~(32 - 1));
+ port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
+
+ /* Initialize all descriptors */
+ for (cur_rx_desc = port_info->rx_desc_base,
+ rx_buf = port_info->rx_buf_base, i = 0;
+ i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
+ cur_rx_desc->rd0 = RD_RACT;
+ cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
+ cur_rx_desc->rd2 = (u32) ADDR_TO_PHY(rx_buf);
+ }
+
+ /* Mark the end of the descriptors */
+ cur_rx_desc--;
+ cur_rx_desc->rd0 |= RD_RDLE;
+
+ /* Point the controller to the rx descriptor list */
+ outl(ADDR_TO_PHY(port_info->rx_desc_base), RDLAR(port));
+ outl(ADDR_TO_PHY(port_info->rx_desc_base), RDFAR(port));
+ outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port));
+ outl(RDFFR_RDLF, RDFFR(port));
+
+ return 0;
+}
+
+static void sh_eth_desc_free(struct dev_info_s *dev)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+
+ if (port_info->tx_desc_malloc) {
+ free(port_info->tx_desc_malloc);
+ port_info->tx_desc_malloc = NULL;
+ }
+
+ if (port_info->rx_desc_malloc) {
+ free(port_info->rx_desc_malloc);
+ port_info->rx_desc_malloc = NULL;
+ }
+
+ if (port_info->rx_buf_malloc) {
+ free(port_info->rx_buf_malloc);
+ port_info->rx_buf_malloc = NULL;
+ }
+}
+
+static int sh_eth_desc_init(struct dev_info_s *dev)
+{
+ int rc;
+
+ if ((rc = sh_eth_tx_desc_init(dev)) || (rc = sh_eth_rx_desc_init(dev))) {
+ sh_eth_desc_free(dev);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int sh_eth_phy_config(struct dev_info_s *dev)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+ int timeout;
+ u32 val;
+ /* Reset phy */
+ sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
+ timeout = 10;
+ while (timeout--) {
+ val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, PHY_CTRL);
+ if (!(val & PHY_C_RESET))
+ break;
+ udelay(50000);
+ }
+ if (timeout < 0) {
+ printf("%s phy reset timeout\n", __func__);
+ return -1;
+ }
+
+ /* Advertise 100/10 baseT full/half duplex */
+ sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_ANA,
+ (PHY_A_FDX|PHY_A_HDX|PHY_A_10FDX|PHY_A_10HDX|PHY_A_EXT));
+ /* Autonegotiation, normal operation, full duplex, enable tx */
+ sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL,
+ (PHY_C_ANEGEN|PHY_C_RANEG));
+ /* Wait for autonegotiation to complete */
+ timeout = 100;
+ while (timeout--) {
+ val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
+ if (val & PHY_S_ANEGC)
+ break;
+ udelay(50000);
+ }
+ if (timeout < 0) {
+ printf("sh_eth_phy_config() phy auto-negotiation failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
+{
+ int port = dev->port;
+ struct port_info_s *port_info = &dev->port_info[port];
+ u32 val;
+ u32 phy_status;
+ int rc;
+
+ /* Configure e-dmac registers */
+ outl((inl(EDMR(port)) & ~EMDR_DESC_R) | EDMR_EL, EDMR(port));
+ outl(0, EESIPR(port));
+ outl(0, TRSCER(port));
+ outl(0, TFTR(port));
+ outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port));
+ outl(RMCR_RST, RMCR(port));
+ outl(0, RPADIR(port));
+ outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port));
+
+ /* Configure e-mac registers */
+ outl(0, ECSIPR(port));
+
+ /* Set Mac address */
+ val = bd->bi_enetaddr[0] << 24 | bd->bi_enetaddr[1] << 16 |
+ bd->bi_enetaddr[2] << 8 | bd->bi_enetaddr[3];
+ outl(val, MAHR(port));
+
+ val = bd->bi_enetaddr[4] << 8 | bd->bi_enetaddr[5];
+ outl(val, MALR(port));
+
+ outl(RFLR_RFL_MIN, RFLR(port));
+ outl(0, PIPR(port));
+ outl(APR_AP, APR(port));
+ outl(MPR_MP, MPR(port));
+ outl(TPAUSER_TPAUSE, TPAUSER(port));
+
+ /* Configure phy */
+ if ((rc = sh_eth_phy_config(dev)))
+ return rc;
+
+ /* Read phy status to finish configuring the e-mac */
+ phy_status = sh_eth_mii_read_phy_reg(dev->port,
+ dev->port_info[dev->port].phy_addr,
+ 1);
+
+ /* Set the transfer speed */
+ if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
+ printf("100Base/");
+ outl(GECMR_100B, GECMR(port));
+ } else {
+ printf("10Base/");
+ outl(GECMR_10B, GECMR(port));
+ }
+
+ /* Check if full duplex mode is supported by the phy */
+ if (phy_status & (PHY_S_100X_F|PHY_S_10T_F)) {
+ printf("Full\n");
+ outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
+ } else {
+ printf("Half\n");
+ outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
+ }
+ return 0;
+}
+
+static int sh_eth_start(struct dev_info_s *dev)
+{
+ /*
+ * Enable the e-dmac receiver only. The transmitter will be enabled when
+ * we have something to transmit
+ */
+ outl(EDRRR_R, EDRRR(dev->port));
+
+ return 0;
+}
+
+static int sh_eth_get_mac(bd_t *bd)
+{
+ char *s, *e;
+ int i;
+
+ s = getenv("ethaddr");
+ if (s != NULL) {
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ } else {
+ puts("Please set MAC address\n");
+ }
+ return 0;
+}
+
+int eth_init(bd_t *bd)
+{
+ int rc;
+ /* Allocate main device information structure */
+ if (!(dev = malloc(sizeof(*dev)))) {
+ printf("eth_init: malloc failed\n");
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(*dev));
+
+ dev->port = CONFIG_SH_ETHER_USE_PORT;
+ dev->port_info[dev->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
+
+ sh_eth_get_mac(bd);
+
+ if ((rc = sh_eth_reset(dev)) || (rc = sh_eth_desc_init(dev)))
+ goto err;
+
+ if ((rc = sh_eth_config(dev, bd)) || (rc = sh_eth_start(dev)))
+ goto err_desc;
+
+ return 0;
+
+err_desc:
+ sh_eth_desc_free(dev);
+err:
+ free(dev);
+ printf("eth_init: Failed\n");
+ return rc;
+}
--- /dev/null
+/*
+ * sh_eth.h - Driver for Renesas SH7763's gigabit ethernet controler.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (c) 2008 Nobuhiro Iwamatsu
+ * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/types.h>
+
+#define SHETHER_NAME "sh_eth"
+
+/* Malloc returns addresses in the P1 area (cacheable). However we need to
+ use area P2 (non-cacheable) */
+#define ADDR_TO_P2(addr) ((((int)(addr) & ~0xe0000000) | 0xa0000000))
+
+/* The ethernet controller needs to use physical addresses */
+#define ADDR_TO_PHY(addr) ((int)(addr) & ~0xe0000000)
+
+/* Number of supported ports */
+#define MAX_PORT_NUM 2
+
+/* Buffers must be big enough to hold the largest ethernet frame. Also, rx
+ buffers must be a multiple of 32 bytes */
+#define MAX_BUF_SIZE (48 * 32)
+
+/* The number of tx descriptors must be large enough to point to 5 or more
+ frames. If each frame uses 2 descriptors, at least 10 descriptors are needed.
+ We use one descriptor per frame */
+#define NUM_TX_DESC 8
+
+/* The size of the tx descriptor is determined by how much padding is used.
+ 4, 20, or 52 bytes of padding can be used */
+#define TX_DESC_PADDING 4
+#define TX_DESC_SIZE (12 + TX_DESC_PADDING)
+
+/* Tx descriptor. We always use 4 bytes of padding */
+struct tx_desc_s {
+ volatile u32 td0;
+ u32 td1;
+ u32 td2; /* Buffer start */
+ u32 padding;
+};
+
+/* There is no limitation in the number of rx descriptors */
+#define NUM_RX_DESC 8
+
+/* The size of the rx descriptor is determined by how much padding is used.
+ 4, 20, or 52 bytes of padding can be used */
+#define RX_DESC_PADDING 4
+#define RX_DESC_SIZE (12 + RX_DESC_PADDING)
+
+/* Rx descriptor. We always use 4 bytes of padding */
+struct rx_desc_s {
+ volatile u32 rd0;
+ volatile u32 rd1;
+ u32 rd2; /* Buffer start */
+ u32 padding;
+};
+
+struct port_info_s {
+ struct tx_desc_s *tx_desc_malloc;
+ struct tx_desc_s *tx_desc_base;
+ struct tx_desc_s *tx_desc_cur;
+ struct rx_desc_s *rx_desc_malloc;
+ struct rx_desc_s *rx_desc_base;
+ struct rx_desc_s *rx_desc_cur;
+ u8 *rx_buf_malloc;
+ u8 *rx_buf_base;
+ u8 mac_addr[6];
+ u8 phy_addr;
+};
+
+struct dev_info_s {
+ int port;
+ struct port_info_s port_info[MAX_PORT_NUM];
+};
+
+/* Register Address */
+#define BASE_IO_ADDR 0xfee00000
+
+#define EDSR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0000)
+
+#define TDLAR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0010)
+#define TDFAR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0014)
+#define TDFXR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0018)
+#define TDFFR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x001c)
+
+#define RDLAR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0030)
+#define RDFAR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0034)
+#define RDFXR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0038)
+#define RDFFR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x003c)
+
+#define EDMR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0400)
+#define EDTRR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0408)
+#define EDRRR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0410)
+#define EESR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0428)
+#define EESIPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0430)
+#define TRSCER(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0438)
+#define TFTR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0448)
+#define FDR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0450)
+#define RMCR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0458)
+#define RPADIR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0460)
+#define FCFTR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0468)
+#define ECMR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0500)
+#define RFLR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0508)
+#define ECSIPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0518)
+#define PIR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0520)
+#define PIPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x052c)
+#define APR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0554)
+#define MPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0558)
+#define TPAUSER(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0564)
+#define GECMR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x05b0)
+#define MALR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x05c8)
+#define MAHR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x05c0)
+
+/*
+ * Register's bits
+ * Copy from Linux driver source code
+ */
+#ifdef CONFIG_CPU_SH7763
+/* EDSR */
+enum EDSR_BIT {
+ EDSR_ENT = 0x01, EDSR_ENR = 0x02,
+};
+#define EDSR_ENALL (EDSR_ENT|EDSR_ENR)
+#endif
+
+/* EDMR */
+enum DMAC_M_BIT {
+ EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
+#ifdef CONFIG_CPU_SH7763
+ EDMR_SRST = 0x03,
+ EMDR_DESC_R = 0x30, /* Descriptor reserve size */
+ EDMR_EL = 0x40, /* Litte endian */
+#else /* CONFIG_CPU_SH7763 */
+ EDMR_SRST = 0x01,
+#endif
+};
+
+/* RFLR */
+#define RFLR_RFL_MIN 0x05EE /* Recv Frame length 1518 byte */
+
+/* EDTRR */
+enum DMAC_T_BIT {
+#ifdef CONFIG_CPU_SH7763
+ EDTRR_TRNS = 0x03,
+#else
+ EDTRR_TRNS = 0x01,
+#endif
+};
+
+/* GECMR */
+enum GECMR_BIT {
+ GECMR_1000B = 0x01, GECMR_100B = 0x40, GECMR_10B = 0x00,
+};
+
+/* EDRRR*/
+enum EDRRR_R_BIT {
+ EDRRR_R = 0x01,
+};
+
+/* TPAUSER */
+enum TPAUSER_BIT {
+ TPAUSER_TPAUSE = 0x0000ffff,
+ TPAUSER_UNLIMITED = 0,
+};
+
+/* BCFR */
+enum BCFR_BIT {
+ BCFR_RPAUSE = 0x0000ffff,
+ BCFR_UNLIMITED = 0,
+};
+
+/* PIR */
+enum PIR_BIT {
+ PIR_MDI = 0x08, PIR_MDO = 0x04, PIR_MMD = 0x02, PIR_MDC = 0x01,
+};
+
+/* PSR */
+enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
+
+/* EESR */
+enum EESR_BIT {
+#ifndef CONFIG_CPU_SH7763
+ EESR_TWB = 0x40000000,
+#else
+ EESR_TWB = 0xC0000000,
+ EESR_TC1 = 0x20000000,
+ EESR_TUC = 0x10000000,
+ EESR_ROC = 0x80000000,
+#endif
+ EESR_TABT = 0x04000000,
+ EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
+#ifndef CONFIG_CPU_SH7763
+ EESR_ADE = 0x00800000,
+#endif
+ EESR_ECI = 0x00400000,
+ EESR_FTC = 0x00200000, EESR_TDE = 0x00100000,
+ EESR_TFE = 0x00080000, EESR_FRC = 0x00040000,
+ EESR_RDE = 0x00020000, EESR_RFE = 0x00010000,
+#ifndef CONFIG_CPU_SH7763
+ EESR_CND = 0x00000800,
+#endif
+ EESR_DLC = 0x00000400,
+ EESR_CD = 0x00000200, EESR_RTO = 0x00000100,
+ EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040,
+ EESR_CELF = 0x00000020, EESR_RRF = 0x00000010,
+ rESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004,
+ EESR_PRE = 0x00000002, EESR_CERF = 0x00000001,
+};
+
+
+#ifdef CONFIG_CPU_SH7763
+# define TX_CHECK (EESR_TC1 | EESR_FTC)
+# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+ | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE)
+
+#else
+# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO)
+# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+ | EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)
+#endif
+
+/* EESIPR */
+enum DMAC_IM_BIT {
+ DMAC_M_TWB = 0x40000000, DMAC_M_TABT = 0x04000000,
+ DMAC_M_RABT = 0x02000000,
+ DMAC_M_RFRMER = 0x01000000, DMAC_M_ADF = 0x00800000,
+ DMAC_M_ECI = 0x00400000, DMAC_M_FTC = 0x00200000,
+ DMAC_M_TDE = 0x00100000, DMAC_M_TFE = 0x00080000,
+ DMAC_M_FRC = 0x00040000, DMAC_M_RDE = 0x00020000,
+ DMAC_M_RFE = 0x00010000, DMAC_M_TINT4 = 0x00000800,
+ DMAC_M_TINT3 = 0x00000400, DMAC_M_TINT2 = 0x00000200,
+ DMAC_M_TINT1 = 0x00000100, DMAC_M_RINT8 = 0x00000080,
+ DMAC_M_RINT5 = 0x00000010, DMAC_M_RINT4 = 0x00000008,
+ DMAC_M_RINT3 = 0x00000004, DMAC_M_RINT2 = 0x00000002,
+ DMAC_M_RINT1 = 0x00000001,
+};
+
+/* Receive descriptor bit */
+enum RD_STS_BIT {
+ RD_RACT = 0x80000000, RD_RDLE = 0x40000000,
+ RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000,
+ RD_RFE = 0x08000000, RD_RFS10 = 0x00000200,
+ RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080,
+ RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020,
+ RD_RFS5 = 0x00000010, RD_RFS4 = 0x00000008,
+ RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002,
+ RD_RFS1 = 0x00000001,
+};
+#define RDF1ST RD_RFP1
+#define RDFEND RD_RFP0
+#define RD_RFP (RD_RFP1|RD_RFP0)
+
+/* RDFFR*/
+enum RDFFR_BIT {
+ RDFFR_RDLF = 0x01,
+};
+
+/* FCFTR */
+enum FCFTR_BIT {
+ FCFTR_RFF2 = 0x00040000, FCFTR_RFF1 = 0x00020000,
+ FCFTR_RFF0 = 0x00010000, FCFTR_RFD2 = 0x00000004,
+ FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001,
+};
+#define FIFO_F_D_RFF (FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0)
+#define FIFO_F_D_RFD (FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0)
+
+/* Transfer descriptor bit */
+enum TD_STS_BIT {
+#ifdef CONFIG_CPU_SH7763
+ TD_TACT = 0x80000000,
+#else
+ TD_TACT = 0x7fffffff,
+#endif
+ TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
+ TD_TFP0 = 0x10000000,
+};
+#define TDF1ST TD_TFP1
+#define TDFEND TD_TFP0
+#define TD_TFP (TD_TFP1|TD_TFP0)
+
+/* RMCR */
+enum RECV_RST_BIT { RMCR_RST = 0x01, };
+/* ECMR */
+enum FELIC_MODE_BIT {
+#ifdef CONFIG_CPU_SH7763
+ ECMR_TRCCM=0x04000000, ECMR_RCSC= 0x00800000, ECMR_DPAD= 0x00200000,
+ ECMR_RZPF = 0x00100000,
+#endif
+ ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
+ ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
+ ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
+ ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004, ECMR_DM = 0x00000002,
+ ECMR_PRM = 0x00000001,
+};
+
+#ifdef CONFIG_CPU_SH7763
+#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | ECMR_RXF | \
+ ECMR_TXF | ECMR_MCT)
+#else
+#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#endif
+
+/* ECSR */
+enum ECSR_STATUS_BIT {
+#ifndef CONFIG_CPU_SH7763
+ ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
+#endif
+ ECSR_LCHNG = 0x04,
+ ECSR_MPD = 0x02, ECSR_ICD = 0x01,
+};
+
+#ifdef CONFIG_CPU_SH7763
+# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
+#else
+# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
+ ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP)
+#endif
+
+/* ECSIPR */
+enum ECSIPR_STATUS_MASK_BIT {
+#ifndef CONFIG_CPU_SH7763
+ ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
+#endif
+ ECSIPR_LCHNGIP = 0x04,
+ ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
+};
+
+#ifdef CONFIG_CPU_SH7763
+# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
+#else
+# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
+ ECSIPR_ICDIP | ECSIPR_MPDIP)
+#endif
+
+/* APR */
+enum APR_BIT {
+ APR_AP = 0x00000004,
+};
+
+/* MPR */
+enum MPR_BIT {
+ MPR_MP = 0x00000006,
+};
+
+/* TRSCER */
+enum DESC_I_BIT {
+ DESC_I_TINT4 = 0x0800, DESC_I_TINT3 = 0x0400, DESC_I_TINT2 = 0x0200,
+ DESC_I_TINT1 = 0x0100, DESC_I_RINT8 = 0x0080, DESC_I_RINT5 = 0x0010,
+ DESC_I_RINT4 = 0x0008, DESC_I_RINT3 = 0x0004, DESC_I_RINT2 = 0x0002,
+ DESC_I_RINT1 = 0x0001,
+};
+
+/* RPADIR */
+enum RPADIR_BIT {
+ RPADIR_PADS1 = 0x20000, RPADIR_PADS0 = 0x10000,
+ RPADIR_PADR = 0x0003f,
+};
+
+#ifdef CONFIG_CPU_SH7763
+# define RPADIR_INIT (0x00)
+#else
+# define RPADIR_INIT (RPADIR_PADS1)
+#endif
+
+/* FDR */
+enum FIFO_SIZE_BIT {
+ FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
+};
+
+enum PHY_OFFSETS {
+ PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
+ PHY_ANA = 4, PHY_ANL = 5, PHY_ANE = 6,
+ PHY_16 = 16,
+};
+
+/* PHY_CTRL */
+enum PHY_CTRL_BIT {
+ PHY_C_RESET = 0x8000, PHY_C_LOOPBK = 0x4000, PHY_C_SPEEDSL = 0x2000,
+ PHY_C_ANEGEN = 0x1000, PHY_C_PWRDN = 0x0800, PHY_C_ISO = 0x0400,
+ PHY_C_RANEG = 0x0200, PHY_C_DUPLEX = 0x0100, PHY_C_COLT = 0x0080,
+};
+#define DM9161_PHY_C_ANEGEN 0 /* auto nego special */
+
+/* PHY_STAT */
+enum PHY_STAT_BIT {
+ PHY_S_100T4 = 0x8000, PHY_S_100X_F = 0x4000, PHY_S_100X_H = 0x2000,
+ PHY_S_10T_F = 0x1000, PHY_S_10T_H = 0x0800, PHY_S_ANEGC = 0x0020,
+ PHY_S_RFAULT = 0x0010, PHY_S_ANEGA = 0x0008, PHY_S_LINK = 0x0004,
+ PHY_S_JAB = 0x0002, PHY_S_EXTD = 0x0001,
+};
+
+/* PHY_ANA */
+enum PHY_ANA_BIT {
+ PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000,
+ PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100,
+ PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020,
+ PHY_A_SEL = 0x001e,
+ PHY_A_EXT = 0x0001,
+};
+
+/* PHY_ANL */
+enum PHY_ANL_BIT {
+ PHY_L_NP = 0x8000, PHY_L_ACK = 0x4000, PHY_L_RF = 0x2000,
+ PHY_L_FCS = 0x0400, PHY_L_T4 = 0x0200, PHY_L_FDX = 0x0100,
+ PHY_L_HDX = 0x0080, PHY_L_10FDX = 0x0040, PHY_L_10HDX = 0x0020,
+ PHY_L_SEL = 0x001f,
+};
+
+/* PHY_ANE */
+enum PHY_ANE_BIT {
+ PHY_E_PDF = 0x0010, PHY_E_LPNPA = 0x0008, PHY_E_NPA = 0x0004,
+ PHY_E_PRX = 0x0002, PHY_E_LPANEGA = 0x0001,
+};
+
+/* DM9161 */
+enum PHY_16_BIT {
+ PHY_16_BP4B45 = 0x8000, PHY_16_BPSCR = 0x4000, PHY_16_BPALIGN = 0x2000,
+ PHY_16_BP_ADPOK = 0x1000, PHY_16_Repeatmode = 0x0800,
+ PHY_16_TXselect = 0x0400,
+ PHY_16_Rsvd = 0x0200, PHY_16_RMIIEnable = 0x0100,
+ PHY_16_Force100LNK = 0x0080,
+ PHY_16_APDLED_CTL = 0x0040, PHY_16_COLLED_CTL = 0x0020,
+ PHY_16_RPDCTR_EN = 0x0010,
+ PHY_16_ResetStMch = 0x0008, PHY_16_PreamSupr = 0x0004,
+ PHY_16_Sleepmode = 0x0002,
+ PHY_16_RemoteLoopOut = 0x0001,
+};
#else
#define MODE_X_DIV 16
#endif
- return (CFG_NS16550_CLK / MODE_X_DIV / gd->baudrate);
+ /* Compute divisor value. Normally, we should simply return:
+ * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+ * but we need to round that value by adding 0.5 or 8/16.
+ * Rounding is especially important at high baud rates.
+ */
+ return (((16 * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate) + 8) / 16;
}
#if !defined(CONFIG_SERIAL_MULTI)
* that can be used to access the memory range with the caching
* properties specified by "flags".
*/
-typedef unsigned long phys_addr_t;
#define MAP_NOCACHE (0)
#define MAP_WRCOMBINE (0)
/* DMA addresses are 32-bits wide */
typedef u32 dma_addr_t;
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base);
#endif
long simple_strtol(const char *cp,char **endp,unsigned int base);
-void panic(const char *fmt, ...);
-int sprintf(char * buf, const char *fmt, ...);
+void panic(const char *fmt, ...)
+ __attribute__ ((format (__printf__, 1, 2)));
+int sprintf(char * buf, const char *fmt, ...)
+ __attribute__ ((format (__printf__, 2, 3)));
int vsprintf(char *buf, const char *fmt, va_list args);
/* lib_generic/crc32.c */
*/
/* serial stuff */
-void serial_printf (const char *fmt, ...);
+void serial_printf (const char *fmt, ...)
+ __attribute__ ((format (__printf__, 1, 2)));
/* stdin */
int getc(void);
/* stdout */
void putc(const char c);
void puts(const char *s);
-void printf(const char *fmt, ...);
+void printf(const char *fmt, ...)
+ __attribute__ ((format (__printf__, 1, 2)));
void vprintf(const char *fmt, va_list args);
/* stderr */
#define stderr 2
#define MAX_FILES 3
-void fprintf(int file, const char *fmt, ...);
+void fprintf(int file, const char *fmt, ...)
+ __attribute__ ((format (__printf__, 2, 3)));
void fputs(int file, const char *s);
void fputc(int file, const char c);
int ftstc(int file);
#define CONFIG_BAUDRATE 115200
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#if defined(CONFIG_OF_LIBFDT)
+#define OF_CPU "cpu@0"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#endif
+
/*
* BOOTP options
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.10.100
-#define CONFIG_SERVERIP 192.168.10.77
-#define CONFIG_GATEWAYIP 192.168.10.77
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
#define CONFIG_ATMEL_SPI 1
#define CONFIG_SPI_FLASH 1
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CONFIG_PIO2 1
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CONFIG_PIO2 1
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
/*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
#define __CONFIG_H
#include <asm/sizes.h>
-/*=======*/
/* Board */
-/*=======*/
#define SFFSDR
#define CFG_NAND_LARGEPAGE
#define CFG_USE_NAND
-/*===================*/
+#define CFG_USE_DSPLINK /* This is to prevent U-Boot from
+ * powering ON the DSP. */
/* SoC Configuration */
-/*===================*/
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
-/*==================================================*/
-/* EEPROM definitions for Atmel 24LC64 EEPROM chip */
-/*==================================================*/
+/* EEPROM definitions for Atmel 24LC64 EEPROM chip */
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-/*=============*/
/* Memory Info */
-/*=============*/
#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
-/*====================*/
/* Serial Driver info */
-/*====================*/
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/*===================*/
/* I2C Configuration */
-/*===================*/
#define CONFIG_HARD_I2C
#define CONFIG_DRIVER_DAVINCI_I2C
#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/*==================================*/
/* Network & Ethernet Configuration */
-/*==================================*/
#define CONFIG_DRIVER_TI_EMAC
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_OVERWRITE_ETHADDR_ONCE
-/*=====================*/
/* Flash & Environment */
-/*=====================*/
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_MAX_CHIPS 1
#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-/*=====================*/
-/* Board related stuff */
-/*=====================*/
-/*==========================================*/
-/* I2C switch definitions for PCA9543 chip */
-/* on Lyrtech SFF SDR board. */
-/* This chip has a single register. */
-/*==========================================*/
+/* I2C switch definitions for PCA9543 chip */
#define CFG_I2C_PCA9543_ADDR 0x70
-#define CFG_I2C_PCA9543_ADDR_LEN 0
+#define CFG_I2C_PCA9543_ADDR_LEN 0 /* Single register. */
#define CFG_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */
-/*==============================*/
/* U-Boot general configuration */
-/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-/* Print buffer size */
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_PBSIZE \
+ (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print buffer size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x80700000 /* Default Linux kernel
#define CFG_LONGHELP
#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC
-/*
- * Define this to load an Integrity kernel.
- *
-#define CONFIG_CMD_ELF
- */
-
-/*===================*/
/* Linux Information */
-/*===================*/
#define LINUX_BOOT_PARAM_ADDR 0x80000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS \
- "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
-
-/*=================*/
+#define CONFIG_BOOTARGS \
+ "mem=56M " \
+ "console=ttyS0,115200n8 " \
+ "root=/dev/nfs rw noinitrd ip=dhcp " \
+ "nfsroot=${serverip}:/nfsroot/sffsdr " \
+ "eth0=${ethaddr}"
+#define CONFIG_BOOTCOMMAND \
+ "nand read 87A00000 100000 300000;" \
+ "bootelf 87A00000"
/* U-Boot commands */
-/*=================*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
-/*=======================*/
/* KGDB support (if any) */
-/*=======================*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.0.22
-#define CONFIG_SERVERIP 192.168.0.1
-#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_ENV_OVERWRITE 1
-/* Network setting */
-#define CONFIG_NETMASK 255.0.0.0
-#define CONFIG_IPADDR 10.0.192.51
-#define CONFIG_SERVERIP 10.0.0.1
-#define CONFIG_GATEWAYIP 10.0.0.1
-
/* SDRAM */
#define CFG_SDRAM_BASE (0x8C000000)
#define CFG_SDRAM_SIZE (0x04000000)
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN (128 * 1024)
+#define CFG_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN (256 * 1024)
+#define CFG_MALLOC_LEN (1024 * 1024)
/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_SIZE (256)
#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
/*
- * NOR Flash
+ * NOR Flash ( Spantion S29GL256P )
*/
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER
-
-#if defined(CONFIG_R2DPLUS_OLD)
-#define CFG_FLASH_BASE (0xA0000000)
-#define CFG_MAX_FLASH_BANKS (1) /* Max number of
- * Flash memory banks
- */
-#define CFG_MAX_FLASH_SECT 142
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
-
-#else /* CONFIG_R2DPLUS_OLD */
-
#define CFG_FLASH_BASE (0xA0000000)
-#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */
-#define CFG_MAX_FLASH_BANKS (2)
-#define CFG_MAX_FLASH_SECT 270
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
- CFG_FLASH_BASE + 0x100000,\
- CFG_FLASH_BASE + 0x400000,\
- CFG_FLASH_BASE + 0x700000, }
-#endif /* CONFIG_R2DPLUS_OLD */
+#define CFG_MAX_FLASH_BANKS (1)
+#define CFG_MAX_FLASH_SECT 256
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000
-#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT 120000
-#define CFG_FLASH_WRITE_TOUT 500
+#define CFG_ENV_SECT_SIZE 0x40000
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
/*
* SuperH Clock setting
/*
* Configuation settings for the Renesas R7780MP board
*
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7780 1
#define CONFIG_R7780MP 1
-#define __LITTLE_ENDIAN 1
+#define CFG_R7780MP_OLD_FLASH 1
+#define __LITTLE_ENDIAN__ 1
/*
* Command line configuration.
/* check for keypress on bootdelay==0 */
/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
-/* Network setting */
-#define CONFIG_NETMASK 255.0.0.0
-#define CONFIG_IPADDR 10.0.192.82
-#define CONFIG_SERVERIP 10.0.0.1
-#define CONFIG_GATEWAYIP 10.0.0.1
-
#define CFG_SDRAM_BASE (0x08000000)
#define CFG_SDRAM_SIZE (128 * 1024 * 1024)
#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
-/* NOR Flash (S29PL127J60TFI130) */
+/* Flash board support */
#define CFG_FLASH_BASE (0xA0000000)
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CFG_MAX_FLASH_BANKS (2)
-#define CFG_MAX_FLASH_SECT 270
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
+#ifdef CFG_R7780MP_OLD_FLASH
+/* NOR Flash (S29PL127J60TFI130) */
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+# define CFG_MAX_FLASH_BANKS (2)
+# define CFG_MAX_FLASH_SECT 270
+# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
CFG_FLASH_BASE + 0x100000,\
CFG_FLASH_BASE + 0x400000,\
CFG_FLASH_BASE + 0x700000, }
+#else /* CFG_R7780MP_OLD_FLASH */
+/* NOR Flash (Spantion S29GL256P) */
+# define CFG_MAX_FLASH_BANKS (1)
+# define CFG_MAX_FLASH_SECT 256
+# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#endif /* CFG_R7780MP_OLD_FLASH */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN (112 * 1024)
+#define CFG_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN (256 * 1024)
+#define CFG_MALLOC_LEN (1204 * 1024)
/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_SIZE (256)
#define CFG_FLASH_EMPTY_INFO
#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE (16 * 1024)
+#define CFG_ENV_SECT_SIZE (256 * 1024)
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_FLASH_ERASE_TOUT 120000
#endif /* CONFIG_CMD_PCI */
#if defined(CONFIG_CMD_NET)
-/* #define CONFIG_NET_MULTI
- #define CONFIG_RTL8169 */
+/*
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8169
+*/
/* AX88696L Support(NE2000 base chip) */
#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_AX88796L
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
#define CONFIG_CMD_ENV
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_JFFS2
#define CONFIG_BOOTDELAY -1
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01"
#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate
settings for this board */
-/* Ethernet */
-#define CONFIG_SH_ETHER 1
-#define CONFIG_SH_ETHER_USE_PORT (1)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x01)
-#define CFG_RX_ETH_BUFFER (8)
-
/* SDRAM */
#define CFG_SDRAM_BASE (0x8C000000)
#define CFG_SDRAM_SIZE (64 * 1024 * 1024)
unsigned char data[ENV_SIZE]; /* Environment data */
} env_t;
-/* Pointer to function that returns a character from the environment */
-extern unsigned char (*env_get_char)(int);
+/* Function that returns a character from the environment */
+unsigned char env_get_char (int);
/* Function that returns a pointer to a value from the environment */
unsigned char *env_get_addr(int);
/* Function that updates CRC of the enironment */
void env_crc_update (void);
+/* [re]set to the default environment */
+void set_default_env(void);
+
#endif /* _ENVIRONMENT_H_ */
#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...) \
+#define MTDDEBUG(n, args...) \
do { \
if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
printk(KERN_INFO args); \
} while(0)
#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) do { } while(0)
+#define MTDDEBUG(n, args...) do { } while(0)
#endif /* CONFIG_MTD_DEBUG */
extern phys_addr_t __lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align,
phys_addr_t max_addr);
extern int lmb_is_reserved(struct lmb *lmb, phys_addr_t addr);
-extern long lmb_free(struct lmb *lmb, u64 base, u64 size);
+extern long lmb_free(struct lmb *lmb, phys_addr_t base, phys_size_t size);
extern void lmb_dump_all(struct lmb *lmb);
#define __LXT971A_H__
/* PHY definitions (LXT971A) [2] */
-#define PHY_COMMON_CTRL (0x00)
-#define PHY_COMMON_STAT (0x01)
-#define PHY_COMMON_ID1 (0x02)
-#define PHY_COMMON_ID2 (0x03)
-#define PHY_COMMON_AUTO_ADV (0x04)
-#define PHY_COMMON_AUTO_LNKB (0x05)
-#define PHY_COMMON_AUTO_EXP (0x06)
-#define PHY_COMMON_AUTO_NEXT (0x07)
-#define PHY_COMMON_AUTO_LNKN (0x08)
#define PHY_LXT971_PORT_CFG (0x10)
#define PHY_LXT971_STAT2 (0x11)
#define PHY_LXT971_INT_ENABLE (0x12)
#define PHY_LXT971_DIG_CFG (0x1A)
#define PHY_LXT971_TX_CTRL (0x1E)
-/* CTRL PHY Control Register Bit Fields */
-#define PHY_COMMON_CTRL_RESET (0x8000)
-#define PHY_COMMON_CTRL_LOOPBACK (0x4000)
-#define PHY_COMMON_CTRL_SPD_MA (0x2040)
-#define PHY_COMMON_CTRL_SPD_10 (0x0000)
-#define PHY_COMMON_CTRL_SPD_100 (0x2000)
-#define PHY_COMMON_CTRL_SPD_1000 (0x0040)
-#define PHY_COMMON_CTRL_SPD_RES (0x2040)
-#define PHY_COMMON_CTRL_AUTO_NEG (0x1000)
-#define PHY_COMMON_CTRL_POWER_DN (0x0800)
-#define PHY_COMMON_CTRL_ISOLATE (0x0400)
-#define PHY_COMMON_CTRL_RES_AUTO (0x0200)
-#define PHY_COMMON_CTRL_DUPLEX (0x0100)
-#define PHY_COMMON_CTRL_COL_TEST (0x0080)
-#define PHY_COMMON_CTRL_RES1 (0x003F)
-
-/* STAT Status Register Bit Fields */
-#define PHY_COMMON_STAT_100BT4 (0x8000)
-#define PHY_COMMON_STAT_100BXFD (0x4000)
-#define PHY_COMMON_STAT_100BXHD (0x2000)
-#define PHY_COMMON_STAT_10BTFD (0x1000)
-#define PHY_COMMON_STAT_10BTHD (0x0800)
-#define PHY_COMMON_STAT_100BT2FD (0x0400)
-#define PHY_COMMON_STAT_100BT2HD (0x0200)
-#define PHY_COMMON_STAT_EXT_STAT (0x0100)
-#define PHY_COMMON_STAT_RES1 (0x0080)
-#define PHY_COMMON_STAT_MF_PSUP (0x0040)
-#define PHY_COMMON_STAT_AN_COMP (0x0020)
-#define PHY_COMMON_STAT_RMT_FLT (0x0010)
-#define PHY_COMMON_STAT_AN_CAP (0x0008)
-#define PHY_COMMON_STAT_LNK_STAT (0x0004)
-#define PHY_COMMON_STAT_JAB_DTCT (0x0002)
-#define PHY_COMMON_STAT_EXT_CAP (0x0001)
-
-/* AUTO_ADV Auto-neg Advert Register Bit Fields */
-#define PHY_COMMON_AUTO_ADV_NP (0x8000)
-#define PHY_COMMON_AUTO_ADV_RES1 (0x4000)
-#define PHY_COMMON_AUTO_ADV_RMT_FLT (0x2000)
-#define PHY_COMMON_AUTO_ADV_RES2 (0x1000)
-#define PHY_COMMON_AUTO_ADV_AS_PAUSE (0x0800)
-#define PHY_COMMON_AUTO_ADV_PAUSE (0x0400)
-#define PHY_COMMON_AUTO_ADV_100BT4 (0x0200)
-#define PHY_COMMON_AUTO_ADV_100BTXFD (0x0100)
-#define PHY_COMMON_AUTO_ADV_100BTX (0x0080)
-#define PHY_COMMON_AUTO_ADV_10BTFD (0x0040)
-#define PHY_COMMON_AUTO_ADV_10BT (0x0020)
-#define PHY_COMMON_AUTO_ADV_SEL_FLD_MA (0x001F)
-#define PHY_COMMON_AUTO_ADV_802_9 (0x0002)
-#define PHY_COMMON_AUTO_ADV_802_3 (0x0001)
-
-/* AUTO_LNKB Auto-neg Link Ability Register Bit Fields */
-#define PHY_COMMON_AUTO_LNKB_NP (0x8000)
-#define PHY_COMMON_AUTO_LNKB_ACK (0x4000)
-#define PHY_COMMON_AUTO_LNKB_RMT_FLT (0x2000)
-#define PHY_COMMON_AUTO_LNKB_RES2 (0x1000)
-#define PHY_COMMON_AUTO_LNKB_AS_PAUSE (0x0800)
-#define PHY_COMMON_AUTO_LNKB_PAUSE (0x0400)
-#define PHY_COMMON_AUTO_LNKB_100BT4 (0x0200)
-#define PHY_COMMON_AUTO_LNKB_100BTXFD (0x0100)
-#define PHY_COMMON_AUTO_LNKB_100BTX (0x0080)
-#define PHY_COMMON_AUTO_LNKB_10BTFD (0x0040)
-#define PHY_COMMON_AUTO_LNKB_10BT (0x0020)
-#define PHY_COMMON_AUTO_LNKB_SEL_FLD_MA (0x001F)
-#define PHY_COMMON_AUTO_LNKB_802_9 (0x0002)
-#define PHY_COMMON_AUTO_LNKB_802_3 (0x0001)
-
-/* AUTO_EXP Auto-neg Expansion Register Bit Fields */
-#define PHY_COMMON_AUTO_EXP_RES1 (0xFFC0)
-#define PHY_COMMON_AUTO_EXP_BASE_PAGE (0x0020)
-#define PHY_COMMON_AUTO_EXP_PAR_DT_FLT (0x0010)
-#define PHY_COMMON_AUTO_EXP_LNK_NP_CAP (0x0008)
-#define PHY_COMMON_AUTO_EXP_NP_CAP (0x0004)
-#define PHY_COMMON_AUTO_EXP_PAGE_REC (0x0002)
-#define PHY_COMMON_AUTO_EXP_LNK_AN_CAP (0x0001)
-
-/* AUTO_NEXT Aut-neg Next Page Tx Register Bit Fields */
-#define PHY_COMMON_AUTO_NEXT_NP (0x8000)
-#define PHY_COMMON_AUTO_NEXT_RES1 (0x4000)
-#define PHY_COMMON_AUTO_NEXT_MSG_PAGE (0x2000)
-#define PHY_COMMON_AUTO_NEXT_ACK_2 (0x1000)
-#define PHY_COMMON_AUTO_NEXT_TOGGLE (0x0800)
-#define PHY_COMMON_AUTO_NEXT_MSG (0x07FF)
-
-/* AUTO_LNKN Auto-neg Link Partner Rx Reg Bit Fields */
-#define PHY_COMMON_AUTO_LNKN_NP (0x8000)
-#define PHY_COMMON_AUTO_LNKN_ACK (0x4000)
-#define PHY_COMMON_AUTO_LNKN_MSG_PAGE (0x2000)
-#define PHY_COMMON_AUTO_LNKN_ACK_2 (0x1000)
-#define PHY_COMMON_AUTO_LNKN_TOGGLE (0x0800)
-#define PHY_COMMON_AUTO_LNKN_MSG (0x07FF)
-
/* PORT_CFG Port Configuration Register Bit Fields */
#define PHY_LXT971_PORT_CFG_RES1 (0x8000)
#define PHY_LXT971_PORT_CFG_FORCE_LNK (0x4000)
#ifndef _NAND_H_
#define _NAND_H_
+extern void nand_init(void);
+
+#ifndef CFG_NAND_LEGACY
#include <linux/mtd/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
extern int nand_curr_device;
extern nand_info_t nand_info[];
-extern void nand_init(void);
static inline int nand_read(nand_info_t *info, off_t ofs, size_t *len, u_char *buf)
{
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
+#endif /* !CFG_NAND_LEGACY */
#endif
#ifdef CONFIG_DRIVER_NS7520_ETHERNET
+#include <miiphy.h>
#include "lxt971a.h"
/* The port addresses */
#ifdef CONFIG_DRIVER_NS9750_ETHERNET
+#include <miiphy.h>
#include "lxt971a.h"
#define NS9750_ETH_MODULE_BASE (0xA0600000)
#define PCI_DEVICE_ID_INTEL_82545EM_FIBER 0x1011
#define PCI_DEVICE_ID_INTEL_82546EB_FIBER 0x1012
#define PCI_DEVICE_ID_INTEL_82540EM_LOM 0x1015
+#define PCI_DEVICE_ID_INTEL_82545GM_COPPER 0x1026
#define PCI_DEVICE_ID_INTEL_82559 0x1030
#define PCI_DEVICE_ID_INTEL_82562ET 0x1031
}
/*
- * print sizes as "xxx kB", "xxx.y kB", "xxx MB" or "xxx.y MB" as needed;
- * allow for optional trailing string (like "\n")
+ * print sizes as "xxx kB", "xxx.y kB", "xxx MB", "xxx.y MB",
+ * xxx GB, or xxx.y GB as needed; allow for optional trailing string
+ * (like "\n")
*/
void print_size (phys_size_t size, const char *s)
{
- ulong m, n;
- ulong d = 1 << 20; /* 1 MB */
- char c = 'M';
-
- if (size < d) { /* print in kB */
- c = 'k';
- d = 1 << 10;
+ ulong m = 0, n;
+ phys_size_t d = 1 << 30; /* 1 GB */
+ char c = 'G';
+
+ if (size < d) { /* try MB */
+ c = 'M';
+ d = 1 << 20;
+ if (size < d) { /* print in kB */
+ c = 'k';
+ d = 1 << 10;
+ }
}
n = size / d;
- m = (10 * (size - (n * d)) + (d / 2) ) / d;
+ /* If there's a remainder, deal with it */
+ if(size % d) {
+ m = (10 * (size - (n * d)) + (d / 2) ) / d;
- if (m >= 10) {
- m -= 10;
- n += 1;
+ if (m >= 10) {
+ m -= 10;
+ n += 1;
+ }
}
printf ("%2ld", n);
return lmb_add_region(_rgn, base, size);
}
-long lmb_free(struct lmb *lmb, u64 base, u64 size)
+long lmb_free(struct lmb *lmb, phys_addr_t base, phys_size_t size)
{
struct lmb_region *rgn = &(lmb->reserved);
- u64 rgnbegin, rgnend;
- u64 end = base + size;
+ phys_addr_t rgnbegin, rgnend;
+ phys_addr_t end = base + size;
int i;
rgnbegin = rgnend = 0; /* supress gcc warnings */
char *commandline = getenv ("bootargs");
char env_buf[12];
int ret;
+ const char *cp;
/* find kernel entry point */
if (images->legacy_hdr_valid) {
sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize));
linux_env_set ("flash_size", env_buf);
+ cp = getenv("ethaddr");
+ if (cp != NULL) {
+ linux_env_set("ethaddr", cp);
+ }
+
+ cp = getenv("eth1addr");
+ if (cp != NULL) {
+ linux_env_set("eth1addr", cp);
+ }
+
if (!images->autostart)
return ;
if (size < bootm_size) {
ulong base = bootmap_base + size;
- printf("WARNING: adjusting available memory to %x\n", size);
+ printf("WARNING: adjusting available memory to %lx\n", size);
lmb_reserve(lmb, base, bootm_size - size);
}
for (j = 0; j < total; j++) {
fdt_get_mem_rsv(of_flat_tree, j, &addr, &size);
- if (addr == (uint64_t)of_flat_tree) {
+ if (addr == (uint64_t)(u32)of_flat_tree) {
fdt_del_mem_rsv(of_flat_tree, j);
break;
}
}
/* Delete the old LMB reservation */
- lmb_free(lmb, (uint64_t)of_flat_tree, fdt_totalsize(of_flat_tree));
+ lmb_free(lmb, (phys_addr_t)(u32)of_flat_tree,
+ (phys_size_t)fdt_totalsize(of_flat_tree));
/* Calculate the actual size of the fdt */
actualsize = fdt_off_dt_strings(of_flat_tree) +
*/
fdt_blob = (char *)fdt_addr;
debug ("* fdt: raw FDT blob\n");
- printf ("## Flattened Device Tree blob at %08lx\n", fdt_blob);
+ printf ("## Flattened Device Tree blob at %08lx\n", (long)fdt_blob);
}
break;
default:
goto error;
}
- printf (" Booting using the fdt blob at 0x%x\n", fdt_blob);
+ printf (" Booting using the fdt blob at 0x%x\n", (int)fdt_blob);
} else if (images->legacy_hdr_valid &&
image_check_type (&images->legacy_hdr_os_copy, IH_TYPE_MULTI)) {
if (fdt_len) {
fdt_blob = (char *)fdt_data;
- printf (" Booting using the fdt at 0x%x\n", fdt_blob);
+ printf (" Booting using the fdt at 0x%x\n", (int)fdt_blob);
if (fdt_check_header (fdt_blob) != 0) {
fdt_error ("image is not a fdt");
COBJS-y += board.o
COBJS-y += bootm.o
-#COBJS-y += time.o
+# COBJS-y += time.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
return 0;
}
+#if defined(CONFIG_CMD_NET)
static int sh_net_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+#endif
typedef int (init_fnc_t) (void);
bd_t *bd;
init_fnc_t **init_fnc_ptr;
- char *s;
int i;
+ char *s;
memset (gd, 0, CFG_GBL_DATA_SIZE);
*/
#include <common.h>
-#include <asm/processer.h>
+#include <asm/processor.h>
static void tmu_timer_start (unsigned int timer)
{
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+/*
+ * CPU and board-specific Ethernet initializations. Aliased function
+ * signals caller to move on
+ */
+static int __def_eth_init(bd_t *bis)
+{
+ return -1;
+}
+int cpu_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init")));
+int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init")));
+
#ifdef CFG_GT_6426x
extern int gt6426x_eth_initialize(bd_t *bis);
#endif
extern int skge_initialize(bd_t*);
extern int tsi108_eth_initialize(bd_t*);
extern int uli526x_initialize(bd_t *);
-extern int tsec_initialize(bd_t*, int, char *);
extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
extern int bfin_EMAC_initialize(bd_t *);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_init();
#endif
+ /* Try board-specific initialization first. If it fails or isn't
+ * present, try the cpu-specific initialization */
+ if (board_eth_init(bis) < 0)
+ cpu_eth_init(bis);
#if defined(CONFIG_DB64360) || defined(CONFIG_CPCI750)
mv6436x_eth_initialize(bis);
#if defined(CONFIG_SK98)
skge_initialize(bis);
#endif
-#if defined(CONFIG_TSEC1)
- tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
-#endif
-#if defined(CONFIG_TSEC2)
- tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
-#endif
-#if defined(CONFIG_MPC85XX_FEC)
- tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME);
-#else
-# if defined(CONFIG_TSEC3)
- tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
-# endif
-# if defined(CONFIG_TSEC4)
- tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
-# endif
-#endif
#if defined(CONFIG_UEC_ETH1)
uec_initialize(0);
#endif
pkt += 5 /*strlen("octet")*/ + 1;
strcpy ((char *)pkt, "timeout");
pkt += 7 /*strlen("timeout")*/ + 1;
- sprintf((char *)pkt, "%d", TIMEOUT);
+ sprintf((char *)pkt, "%lu", TIMEOUT);
#ifdef ET_DEBUG
printf("send option \"timeout %s\"\n", (char *)pkt);
#endif
projects / platform / kernel / u-boot.git / commitdiff