moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 2

some boards have common headers for several individual build-targets
where CONFIG_SYS_SPI_U_BOOT_OFFS is defined even it is not needed (only
needed if CONFIG_SPL_SPI_LOAD is defined also). Take this define here
under '#ifdef CONFIG_SPL_SPI_LOAD' for having a clean run of
moveconfig.py

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index e9b97b6..2abe979 100644 (file)
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -153,7 +153,7 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#elif CONFIG_SPI_BOOT
+#elif CONFIG_SPI_BOOT && CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
 
 #elif CONFIG_NAND_BOOT

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 9353de7..8056822 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -125,7 +125,7 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
-#elif CONFIG_SPI_BOOT
+#elif CONFIG_SPI_BOOT && CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
 
 #elif CONFIG_NAND_BOOT

diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h
index 9ba516f..dbc7011 100644 (file)
--- a/include/configs/rk3128_common.h
+++ b/include/configs/rk3128_common.h
@@ -26,7 +26,9 @@
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* 64M */
 
 /* RAW SD card / eMMC locations. */
+#ifdef CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+#endif
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SYS_SDRAM_BASE          0x60000000

diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index ad367ed..9648e34 100644 (file)
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -29,7 +29,9 @@
 #define CONFIG_IRAM_BASE               0xff700000
 
 /* RAW SD card / eMMC locations. */
+#ifdef CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+#endif
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1

diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 2dfd952..394ee3e 100644 (file)
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -24,7 +24,9 @@
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* 64M */
 
+#ifdef CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+#endif
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1

diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 355850e..06d35a0 100644 (file)
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -38,7 +38,9 @@
 #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
 
 /* RAW SD card / eMMC locations. */
+#ifdef CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+#endif
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1

diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h
index 90846c4..7898f4d 100644 (file)
--- a/include/configs/sama5d27_som1_ek.h
+++ b/include/configs/sama5d27_som1_ek.h
@@ -62,7 +62,7 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 #endif
 
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL_SPI_LOAD)
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
 #endif
 

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index db840e9..c5a2e54 100644 (file)
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -84,7 +84,7 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#elif CONFIG_SPI_BOOT
+#elif CONFIG_SPI_BOOT && CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
 
 #elif CONFIG_NAND_BOOT

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 36b0ed5..4141c7e 100644 (file)
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -214,9 +214,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 
 /* SPL QSPI boot support */
 #ifdef CONFIG_SPL_SPI_SUPPORT
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5) && defined(CONFIG_SPL_SPI_LOAD)
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
-#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) && defined(CONFIG_SPL_SPI_LOAD)
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x100000
 #endif
 #endif

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index d7133a7..c5dbf6d 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -118,7 +118,7 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 #endif
 
-#ifdef CONFIG_SPL_SPI_SUNXI
+#if defined(CONFIG_SPL_SPI_SUNXI) && defined(CONFIG_SPL_SPI_LOAD)
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
 #endif
 

diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index b3f4fc5..364bac0 100644 (file)
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -129,7 +129,9 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
+#ifdef CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+#endif
 #define CONFIG_SYS_SPI_U_BOOT_SIZE     0x40000
 
 /*

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index bbcb207..56500fe 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -217,9 +217,10 @@
 # define CONFIG_SYS_SPI_KERNEL_OFFS    0x80000
 # define CONFIG_SYS_SPI_ARGS_OFFS      0xa0000
 # define CONFIG_SYS_SPI_ARGS_SIZE      0xa0000
-
+#ifdef CONFIG_SPL_SPI_LOAD
 # define CONFIG_SYS_SPI_U_BOOT_OFFS    0x170000
 #endif
+#endif
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME   "u-boot.bin"

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index bb6a835..fd761c2 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -293,7 +293,9 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
+#ifdef CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x100000
+#endif
 #define CONFIG_SYS_SPI_ARGS_OFFS       0x200000
 #define CONFIG_SYS_SPI_ARGS_SIZE       0x80000
 #define CONFIG_SYS_SPI_KERNEL_OFFS     (CONFIG_SYS_SPI_ARGS_OFFS + \