include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 119bc24..b0116e7 100644 (file)
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -50,20 +50,25 @@
 
 #undef CONFIG_MONITOR_IS_IN_RAM                      /* no pre-loader required!!! ;-) */
 
-#define CONFIG_COMMANDS              ((CONFIG_CMD_DFL        |    \
-                               CFG_CMD_BSP           |    \
-                               CFG_CMD_EEPROM        |    \
-                               CFG_CMD_I2C            ) & \
-                              ~(CFG_CMD_NET))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+
+#undef CONFIG_CMD_NET
+
+
 #define CONFIG_BOOTDELAY       3
 
 #define CFG_PROMPT             "=> "
 #define CFG_LONGHELP                           /* undef to save memory         */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256             /* Console I/O Buffer Size      */

diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 2344b96..717b779 100644 (file)
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -107,30 +107,28 @@
  */
 #define CFG_MATCH_PARTIAL_CMD
 
+
 /*
- * List of available monitor commands.  Use the system default list
- * plus add some of the "non-standard" commands back in.
- * See ./cmd_confdefs.h
- */
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                                                               CFG_CMD_ASKENV  | \
-                                                               CFG_CMD_DHCP    | \
-                                                               CFG_CMD_I2C             | \
-                                                               CFG_CMD_EEPROM  | \
-                                                               CFG_CMD_REGINFO | \
-                                                               CFG_CMD_IMMAP   | \
-                                                               CFG_CMD_ELF             | \
-                                                               CFG_CMD_DATE    | \
-                                                               CFG_CMD_MII     | \
-                                                               CFG_CMD_BEDBUG  \
-                                                     )
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+
 
 #define        CONFIG_AUTOSCRIPT               1
 #define        CFG_LOADS_BAUD_CHANGE   1
 #undef CONFIG_LOADS_ECHO                       /* NO echo on for serial download       */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
@@ -141,7 +139,7 @@
  #define CFG_PROMPT_HUSH_PS2   "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
  #define CFG_CBSIZE    1024            /* Console I/O Buffer Size      */
 #else
  #define CFG_CBSIZE    256             /* Console I/O Buffer Size      */
@@ -239,7 +237,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 5f48a70..ab802a3 100644 (file)
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -48,27 +48,24 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG       1
 
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
-                       (CONFIG_CMD_DFL  | \
-                       CFG_CMD_CACHE    | \
-                       /*CFG_CMD_JFFS2  |*/ \
-                       /*CFG_CMD_NAND   |*/ \
-                       CFG_CMD_EEPROM   | \
-                       CFG_CMD_I2C      | \
-                       CFG_CMD_USB      | \
-                       CFG_CMD_REGINFO  | \
-                       CFG_CMD_FAT      | \
-                       CFG_CMD_DATE     | \
-                       CFG_CMD_ELF      | \
-                       CFG_CMD_DHCP     | \
-                       CFG_CMD_PING     | \
-                       CFG_CMD_BSP)
-
-/* this must be included after the definiton of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+
 
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2 "> "
@@ -145,7 +142,7 @@
 #define CONFIG_IPADDR          10.0.0.110
 #define CONFIG_SERVERIP                10.0.0.1
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */
@@ -246,7 +243,7 @@
 /*-----------------------------------------------------------------------
  * NAND flash settings
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 
 #define CFG_NAND_LEGACY
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices           */
@@ -280,6 +277,6 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_MTD_NAND_ECC_JFFS2      1
 
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif
 
 #endif /* __CONFIG_H */

diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 96f3d26..3f2c32b 100644 (file)
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -58,28 +58,31 @@
 
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_IDE     | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_NAND    | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_EEPROM  )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_SUPPORT_VFAT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
 #define CONFIG_RTC_MC146818            /* DS1685 is MC146818 compatible*/
@@ -98,7 +101,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -319,7 +322,7 @@
 #define CFG_DCACHE_SIZE                16384   /* For AMCC 405 CPUs, older 405 ppc's   */
                                        /* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index f2f3ea7..f312ea4 100644 (file)
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -65,19 +65,22 @@
                                 CONFIG_BOOTP_DNS2 | \
                                 CONFIG_BOOTP_SEND_HOSTNAME )
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_BSP     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_EEPROM  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -96,7 +99,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -244,7 +247,7 @@
 #define CFG_DCACHE_SIZE                16384   /* For AMCC 405 CPUs, older 405 ppc's   */
                                        /* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 92bade5..8806244 100644 (file)
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -138,24 +138,25 @@
 
 #endif
 
-/* configure commands */
-#define CONFIG_COMMANDS                (       CFG_CMD_AUTOSCRIPT      | \
-                                       CFG_CMD_BDI             | \
-                                       CFG_CMD_CONSOLE         | \
-                                       CFG_CMD_ECHO            | \
-                                       CFG_CMD_ENV             | \
-                                       CFG_CMD_FLASH           | \
-                                       CFG_CMD_IMI             | \
-                                       CFG_CMD_IMLS            | \
-                                       CFG_CMD_LOADB           | \
-                                       CFG_CMD_MEMORY          | \
-                                       CFG_CMD_MISC            | \
-                                       CFG_CMD_NET             | \
-                                       CFG_CMD_PING            | \
-                                       CFG_CMD_RUN     )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IMLS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
 
 /*
  * boot options & environment
@@ -206,7 +207,7 @@
 #define        CFG_PROMPT                      "=> "
 
 /* console i/o buffer size */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE                      1024
 #else
 #define        CFG_CBSIZE                      256
@@ -305,7 +306,7 @@
 
 /* cache configuration */
 #define CFG_CACHELINE_SIZE             32      /* for MPC8260 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT            5       /* log base 2 of above */
 #endif
 

diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 8dc623e..fd81096 100644 (file)
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -70,13 +70,22 @@
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
 
-#define CONFIG_COMMANDS                \
-       (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \
-        CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \
-        CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_REGINFO
 
 #undef CONFIG_WATCHDOG                         /* watchdog disabled            */
 #define CONFIG_HW_WATCHDOG                     /* HW Watchdog, board specific  */
@@ -92,7 +101,7 @@
 #ifdef  CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256             /* Console I/O Buffer Size      */
@@ -277,7 +286,7 @@
  */
 #define CFG_DCACHE_SIZE                8192            /* For AMCC 405 CPUs                    */
 #define CFG_CACHELINE_SIZE     32              /* ...          */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5               /* log base 2 of the above val. */
 #endif
 
@@ -309,7 +318,7 @@
 #define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use     */
 #endif

diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 2bd98b3..a5ce685 100644 (file)
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -75,14 +75,25 @@
 #define CFG_DTT_LOW_TEMP       -30
 #define CFG_DTT_HYSTERESIS     3
 
-#define CONFIG_COMMANDS                \
-       (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \
-        CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \
-        CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO | \
-        CFG_CMD_DTT)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DTT
+
 
 #undef CONFIG_WATCHDOG                         /* watchdog disabled            */
 #define CONFIG_HW_WATCHDOG                     /* HW Watchdog, board specific  */
@@ -98,7 +109,7 @@
 #ifdef  CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256             /* Console I/O Buffer Size      */
@@ -278,7 +289,7 @@
  */
 #define CFG_DCACHE_SIZE                8192            /* For AMCC 405 CPUs                    */
 #define CFG_CACHELINE_SIZE     32              /* ...          */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5               /* log base 2 of the above val. */
 #endif
 
@@ -310,7 +321,7 @@
 #define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use     */
 #endif

diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index faf855d..f786520 100644 (file)
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -60,19 +60,22 @@
 
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_NAND    | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_EEPROM  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -92,7 +95,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -270,7 +273,7 @@
 #define CFG_DCACHE_SIZE                16384   /* For AMCC 405 CPUs, older 405 ppc's   */
                                        /* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index f2ad097..4b8fbe6 100644 (file)
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -182,25 +182,24 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_HAS_ETH2                1       /* add support for "eth2addr"   */
 #define CONFIG_HAS_ETH3                1       /* add support for "eth3addr"   */
 
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_BEDBUG  | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_PING | \
-                               CFG_CMD_ELF | \
-                               CFG_CMD_MII | \
-                               CFG_CMD_DIAG | \
-                               CFG_CMD_FAT )
-
-/*                             CFG_CMD_DHCP    | \ */
-/*                             CFG_CMD_KGDB    | \ */
-
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -209,7 +208,7 @@ extern void out32(unsigned int, unsigned long);
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -254,7 +253,7 @@ extern void out32(unsigned int, unsigned long);
  */
 #define CFG_DCACHE_SIZE                8192 /* For AMCC 440GX CPUs */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 
@@ -266,7 +265,7 @@ extern void out32(unsigned int, unsigned long);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 37ef105..07fab44 100644 (file)
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -39,12 +39,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot      */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5   /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -70,31 +64,31 @@
 
 #define CONFIG_TIMESTAMP                       /* Print image info with timestamp */
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_BOOTD   | \
-                               CFG_CMD_CACHE   | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_SNTP    )
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #define CONFIG_NET_MULTI
 #define CONFIG_MII
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Autobooting
  */
@@ -293,7 +287,7 @@
  */
 #define CFG_LONGHELP                       /* undef to save memory     */
 #define CFG_PROMPT             "=> "       /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024        /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256         /* Console I/O Buffer Size  */
@@ -309,6 +303,11 @@
 
 #define CFG_HZ                 1000        /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5   /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 2b02fe7..30c7790 100644 (file)
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -106,22 +106,24 @@
 
 #define CONFIG_BAUDRATE                38400
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL   \
-                               | CFG_CMD_ASKENV  \
-                               | CFG_CMD_DHCP    \
-                               | CFG_CMD_IMMAP   \
-                               | CFG_CMD_MII     \
-                               | CFG_CMD_PING    \
-                               )
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND     "dhcp;bootm"    /* autoboot command */
 #define CONFIG_BOOTARGS                "root=/dev/nfs rw ip=:::::eth0:dhcp"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef CONFIG_KGDB_ON_SMC              /* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC             /* define if kgdb on SCC */
 #undef CONFIG_KGDB_NONE                /* define if kgdb on something else */
@@ -139,7 +141,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -223,7 +225,7 @@
 #endif
 
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index f163d00..6620938 100644 (file)
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -106,12 +106,18 @@
 
 #define CONFIG_MII             /* enable MII commands */
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_ASKENV | \
-                                CFG_CMD_BSP    | \
-                                CFG_CMD_JFFS2  | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_DATE)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
 
 /*
  * JFFS2 partitions
@@ -131,15 +137,12 @@
 #define MTDPARTS_DEFAULT       "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -349,7 +352,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32      /* For all MPC74xx CPUs          */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif