powerpc/85xx: rename NAND prefixes to CONFIG_SYS

renaming 85xx define CONFIG_NAND_OR_PRELIM to CONFIG_SYS_NAND_OR_PRELIM
and CONFIG_NAND_BR_PRELIM to CONFIG_SYS_NAND_BR_PRELIM to use the more
appropriate CONFIG_SYS prefix as well as be consistent with 83xx.

Signed-off-by: Matthew McClintock <msm@freescale.com>
cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
index 8fb27ab..920bb47 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
@@ -33,11 +33,11 @@ void cpu_init_f(void)
         */
        out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
 
-#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
-       set_lbc_br(0, CONFIG_NAND_BR_PRELIM);
-       set_lbc_or(0, CONFIG_NAND_OR_PRELIM);
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+       set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+       set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
 #else
-#error  CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
+#error  CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM must be defined
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 333a1ea..9b3e032 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -361,13 +361,13 @@
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 
 /* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM \
+#define CONFIG_SYS_NAND_BR_PRELIM \
                (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
                | BR_V)                 /* valid */
-#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000     /* length 256K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM      (0xFFFC0000     /* length 256K */ \
                | OR_FCM_PGS            /* Large Page*/ \
                | OR_FCM_CSCT \
                | OR_FCM_CST \
@@ -377,15 +377,15 @@
                | OR_FCM_EHTR)
 
 #ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_NAND_BR_PRELIM   /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 #else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM   /* NAND Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #endif
 
 #define CONFIG_SYS_BR4_PRELIM \
@@ -394,14 +394,14 @@
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
                | BR_V)                 /* valid */
-#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR5_PRELIM \
                (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \
                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
                | BR_V)                 /* valid */
-#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
 #define CONFIG_SYS_BR6_PRELIM \
                (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \
@@ -409,7 +409,7 @@
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
                | BR_V)                 /* valid */
-#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2

diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5f80425..5a7e99e 100644 (file)
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -240,12 +240,12 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-#define CONFIG_NAND_BR_PRELIM  (CONFIG_SYS_NAND_BASE_PHYS \
+#define CONFIG_SYS_NAND_BR_PRELIM      (CONFIG_SYS_NAND_BASE_PHYS \
                                | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
                                | BR_PS_8            /* Port Size = 8 bit */ \
                                | BR_MS_FCM          /* MSEL = FCM */ \
                                | BR_V)              /* valid */
-#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000          /* length 256K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM      (0xFFFC0000          /* length 256K */ \
                                | OR_FCM_CSCT \
                                | OR_FCM_CST \
                                | OR_FCM_CHT \
@@ -254,15 +254,15 @@ extern unsigned long get_clock_freq(void);
                                | OR_FCM_EHTR)
 
 #ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_NAND_BR_PRELIM   /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */
 #define CONFIG_SYS_BR3_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR3_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 #else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#define CONFIG_SYS_BR3_PRELIM  CONFIG_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR3_PRELIM  CONFIG_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR3_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR3_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #endif
 
 #define CONFIG_SYS_LBC_LCRR    0x00000004      /* LB clock ratio reg */

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 8c0d06a..d93185c 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -362,12 +362,12 @@
 
 
 /* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
-#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000           /* length 256K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000       /* length 256K */ \
                               | OR_FCM_PGS            /* Large Page*/ \
                               | OR_FCM_CSCT \
                               | OR_FCM_CST \
@@ -377,35 +377,35 @@
                               | OR_FCM_EHTR)
 
 #ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_NAND_BR_PRELIM   /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 #else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #endif
 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
-#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM    /* NAND Options */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
-#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM    /* NAND Options */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
 #define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
-#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM    /* NAND Options */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
 
 /* Serial Port - controlled on board with jumper J8

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 4103e8b..cccf84d 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -303,13 +303,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP                ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 
 /* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8       /* Port Size = 8 bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
 
-#define CONFIG_NAND_OR_PRELIM  (0xFFF80000             /* length 32K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM      (0xFFF80000     /* length 32K */ \
                                | OR_FCM_CSCT \
                                | OR_FCM_CST \
                                | OR_FCM_CHT \
@@ -318,15 +318,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
                                | OR_FCM_EHTR)
 
 #ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR1_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR1_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 #else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#define CONFIG_SYS_BR1_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
-#define CONFIG_SYS_OR1_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+#define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #endif
 
 #define CONFIG_SYS_VSC7385_BASE        0xffb00000

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 30da7b1..47f1f18 100644 (file)
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -326,12 +326,12 @@
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
 /* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
-#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000             /* length 256K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000         /* length 256K */ \
                                | OR_FCM_PGS            /* Large Page*/ \
                                | OR_FCM_CSCT \
                                | OR_FCM_CST \
@@ -342,28 +342,28 @@
 
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM  /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM  /* NAND Options */
 
 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
-#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 #define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
-#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 
 #define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
-#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2