ARM: da850-evm: Unify config options with Kconfig
authorAdam Ford <aford173@gmail.com>
Mon, 29 Jun 2020 23:49:41 +0000 (18:49 -0500)
committerLokesh Vutla <lokeshvutla@ti.com>
Mon, 13 Jul 2020 15:28:34 +0000 (20:58 +0530)
There are two options that are currently whitelisted, but they
are redundant, because there are not necessary since Kconfig options
exist to basically state the same thing.

CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and
only used by the da850 when booting from NOR, however the only time
CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since
NOR doesn't need SPL, the options for SPL can be moved to a check for
building SPL instead of checking for NOR.

This patch removes the checks for these two config options and unifies
the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH.

Since this board is the only board that uses these two config options,
they can be removed from the whitelist table.

Signed-off-by: Adam Ford <aford173@gmail.com>
board/davinci/da8xxevm/da850evm.c
configs/da850evm_direct_nor_defconfig
include/configs/da850evm.h
scripts/config_whitelist.txt

index a3b0f8b..c91aeb8 100644 (file)
@@ -205,7 +205,7 @@ int misc_init_r(void)
 }
 
 static const struct pinmux_config gpio_pins[] = {
-#ifdef CONFIG_USE_NOR
+#ifdef CONFIG_MTD_NOR_FLASH
        /* GP0[11] is required for NOR to work on Rev 3 EVMs */
        { pinmux(0), 8, 4 },    /* GP0[11] */
 #endif
@@ -235,7 +235,7 @@ const struct pinmux_resource pinmuxes[] = {
        PINMUX_ITEM(emifa_pins_cs3),
        PINMUX_ITEM(emifa_pins_cs4),
        PINMUX_ITEM(emifa_pins_nand),
-#elif defined(CONFIG_USE_NOR)
+#elif defined(CONFIG_MTD_NOR_FLASH)
        PINMUX_ITEM(emifa_pins_cs2),
        PINMUX_ITEM(emifa_pins_nor),
 #endif
@@ -341,7 +341,7 @@ int board_init(void)
                 DAVINCI_SYSCFG_SUSPSRC_UART2),
               &davinci_syscfg_regs->suspsrc);
 
-#ifdef CONFIG_USE_NOR
+#ifdef CONFIG_MTD_NOR_FLASH
        /* Set the GPIO direction as output */
        clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
 
index 36ef122..3924895 100644 (file)
@@ -10,7 +10,6 @@ CONFIG_ENV_SIZE=0x2800
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_EXTRA_OPTIONS="USE_NOR,DIRECT_NOR_BOOT"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
index 2bb4e47..11aca4a 100644 (file)
 /*
  * Board
  */
-/* check if direct NOR boot config is used */
-#ifndef CONFIG_DIRECT_NOR_BOOT
-#define CONFIG_USE_SPIFLASH
-#endif
 
 /*
  * SoC Configuration
@@ -28,7 +24,7 @@
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
-#ifdef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_DV_NOR_BOOT_CFG     (0x11)
 #endif
 
 
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
 
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SYS_SPI_U_BOOT_SIZE     0x40000
-#endif
-
 /*
  * I2C Configuration
  */
 #define CONFIG_NET_RETRY_COUNT 10
 #endif
 
-#ifdef CONFIG_USE_NOR
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_MAX_FLASH_BANKS     1 /* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ       (128 << 10) /* 128KB */
 #define CONFIG_SYS_FLASH_BASE          DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 #define CONFIG_CLOCKS
 #endif
 
-#if !defined(CONFIG_MTD_RAW_NAND) && \
-       !defined(CONFIG_USE_NOR) && \
-       !defined(CONFIG_USE_SPIFLASH)
-#endif
-
 /* USB Configs */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     15
 
-#ifndef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_SPL_BUILD
 /* defines for SPL */
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
                                                CONFIG_SYS_MALLOC_LEN)
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0xc0000000
 
-#ifdef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_INIT_SP_ADDR                0x8001ff00
 #else
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
                                        GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_DIRECT_NOR_BOOT */
+#endif /* CONFIG_MTD_NOR_FLASH */
 
 #include <asm/arch/hardware.h>
 
index ca40b9b..e3bebe9 100644 (file)
@@ -312,7 +312,6 @@ CONFIG_DFU_ENV_SETTINGS
 CONFIG_DHCP_MIN_EXT_LEN
 CONFIG_DIALOG_POWER
 CONFIG_DIMM_SLOTS_PER_CTLR
-CONFIG_DIRECT_NOR_BOOT
 CONFIG_DISCONTIGMEM
 CONFIG_DISCOVER_PHY
 CONFIG_DISPLAY_AER_xxxx
@@ -4150,7 +4149,6 @@ CONFIG_USB_XHCI_EXYNOS
 CONFIG_USB_XHCI_OMAP
 CONFIG_USER_LOWLEVEL_INIT
 CONFIG_USE_INTERRUPT
-CONFIG_USE_NOR
 CONFIG_USE_ONENAND_BOARD_INIT
 CONFIG_USE_SPIFLASH
 CONFIG_UTBIPAR_INIT_TBIPA