F: arch/x86/
F: cmd/x86/
+XEN
+M: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
+M: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
+S: Maintained
+F: arch/arm/cpu/armv8/xen/
+F: arch/arm/include/asm/xen.h
+F: arch/arm/include/asm/xen/
+F: cmd/pvblock.c
+F: drivers/serial/serial_xen.c
+F: drivers/xen/
+F: include/pvblock.h
+F: include/xen/
+F: include/xen.h
+F: lib/sscanf.c
+F: test/lib/sscanf.c
+
XTENSA
M: Max Filippov <jcmvbkbc@gmail.com>
S: Maintained
Enables an 'i2c edid' command which can read EDID
information over I2C from an attached LCD display.
-- Splash Screen Support: CONFIG_SPLASH_SCREEN
-
- If this option is set, the environment is checked for
- a variable "splashimage". If found, the usual display
- of logo, copyright and system information on the LCD
- is suppressed and the BMP image at the address
- specified in "splashimage" is loaded instead. The
- console is redirected to the "nulldev", too. This
- allows for a "silent" boot where a splash screen is
- loaded very quickly after power-on.
-
- CONFIG_SPLASHIMAGE_GUARD
-
- If this option is set, then U-Boot will prevent the environment
- variable "splashimage" from being set to a problematic address
- (see doc/README.displaying-bmps).
- This option is useful for targets where, due to alignment
- restrictions, an improperly aligned BMP image will cause a data
- abort. If you think you will not have problems with unaligned
- accesses (for example because your toolchain prevents them)
- there is no need to set this option.
-
- CONFIG_SPLASH_SCREEN_ALIGN
-
- If this option is set the splash image can be freely positioned
- on the screen. Environment variable "splashpos" specifies the
- position as "x,y". If a positive number is given it is used as
- number of pixel from left/top. If a negative number is given it
- is used as number of pixel from right/bottom. You can also
- specify 'm' for centering the image.
-
- Example:
- setenv splashpos m,m
- => image at center of screen
-
- setenv splashpos 30,20
- => image at x = 30 and y = 20
-
- setenv splashpos -10,m
- => vertically centered image
- at x = dspWidth - bmpWidth - 9
-
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
If this option is set, additionally to standard BMP
select DM_SERIAL
select OF_CONTROL
imply BOARD_LATE_INIT
+ imply ENV_VARS_UBOOT_RUNTIME_CONFIG
config ARCH_VF610
bool "Freescale Vybrid"
imply CMD_CLK
imply CMD_DM
imply CMD_SPL
+ imply ENV_VARS_UBOOT_RUNTIME_CONFIG
imply FAT_WRITE
config ARCH_ZYNQMP_R5
select ZYNQMP_IPI
imply BOARD_LATE_INIT
imply CMD_DM
+ imply ENV_VARS_UBOOT_RUNTIME_CONFIG
imply FAT_WRITE
imply MP
imply DM_USB_GADGET
select USB
select DM_USB
+config TARGET_TOTAL_COMPUTE
+ bool "Support Total Compute Platform"
+ select ARM64
+ select PL01X_SERIAL
+ select DM
+ select DM_SERIAL
+ select DM_MMC
+ select DM_GPIO
+
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
select ARCH_LS2080A
imply TPL_SYSRESET
imply USB_FUNCTION_FASTBOOT
+config ARCH_OCTEONTX
+ bool "Support OcteonTX SoCs"
+ select DM
+ select ARM64
+ select OF_CONTROL
+ select OF_LIVE
+ select BOARD_LATE_INIT
+ select SYS_CACHE_SHIFT_7
+
+config ARCH_OCTEONTX2
+ bool "Support OcteonTX2 SoCs"
+ select DM
+ select ARM64
+ select OF_CONTROL
+ select OF_LIVE
+ select BOARD_LATE_INIT
+ select SYS_CACHE_SHIFT_7
+
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
select ARM64
source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/mach-octeontx/Kconfig"
+
+source "arch/arm/mach-octeontx2/Kconfig"
+
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
source "arch/arm/mach-imx/mx2/Kconfig"
source "arch/arm/mach-nexell/Kconfig"
+source "board/armltd/total_compute/Kconfig"
+
source "board/bosch/shc/Kconfig"
source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
+source "board/Marvell/octeontx/Kconfig"
+source "board/Marvell/octeontx2/Kconfig"
source "board/armadeus/apf27/Kconfig"
source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/xilinx/Kconfig"
source "board/xilinx/zynq/Kconfig"
source "board/xilinx/zynqmp/Kconfig"
+source "board/xilinx/versal/Kconfig"
source "board/phytium/durian/Kconfig"
source "board/xen/xenguest_arm64/Kconfig"
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U8500) += u8500
+machine-$(CONFIG_ARCH_OCTEONTX) += octeontx
+machine-$(CONFIG_ARCH_OCTEONTX2) += octeontx2
machine-$(CONFIG_ARCH_UNIPHIER) += uniphier
machine-$(CONFIG_ARCH_VERSAL) += versal
machine-$(CONFIG_ARCH_ZYNQ) += zynq
dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7622-rfb.dtb \
mt7623a-unielec-u7623-02-emmc.dtb \
+ mt7622-bananapi-bpi-r64.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt7629-rfb.dtb \
mt8512-bm1-emmc.dtb \
dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
+dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
+
dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
/* microSD card slot */
&sdhci1 {
status = "okay";
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
clock-frequency = <199998000>;
max-frequency = <50000000>;
no-1-8-v;
/* Micron MTFC8GAKAJCN-4M 8 GB eMMC */
&sdhci0 {
status = "okay";
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
clock-frequency = <199998000>;
};
&eeprom {
partitions {
compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- vpd {
- offset = <0>;
- size = <1022>;
+ vpd@0 {
+ reg = <0 1022>;
};
- bootcount: bootcount {
- offset = <1022>;
- size = <2>;
+ bootcount: bootcount@1022 {
+ reg = <1022 2>;
};
};
};
&eeprom {
partitions {
compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- vpd {
- offset = <0>;
- size = <1022>;
+ vpd@0 {
+ reg = <0 1022>;
};
bootcount: bootcount {
- offset = <1022>;
- size = <2>;
+ reg = <1022 2>;
};
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7622.dtsi"
+#include "mt7622-u-boot.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mt7622-bpi-r64";
+ compatible = "mediatek,mt7622", "mediatek,mt7622-rfb";
+ chosen {
+ stdout-path = &uart0;
+ tick-timer = &timer0;
+ };
+
+ aliases {
+ spi0 = &snfi;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pinctrl {
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
+ snfi_pins: snfi-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ snor_pins: snor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ uart0_pins: uart0 {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ pwm_pins: pwm1 {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch1_0" ;
+ };
+ };
+
+ watchdog_pins: watchdog-default {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
+
+ };
+
+ mmc1_pins_default: mmc1default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
+
+ };
+};
+
+&snfi {
+ pinctrl-names = "default", "snfi";
+ pinctrl-0 = <&snor_pins>;
+ pinctrl-1 = <&snfi_pins>;
+ status = "okay";
+
+ spi-flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_default>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+ mediatek,gmac-id = <0>;
+ phy-mode = "sgmii";
+ mediatek,switch = "mt7531";
+ reset-gpios = <&gpio 54 GPIO_ACTIVE_HIGH>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gpio {
+ /*gpio 90 for setting mode to sata*/
+ asm_sel {
+ gpio-hog;
+ gpios = <90 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+};
+
+&ssusb {
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
&pinctrl {
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
snfi_pins: snfi-pins {
mux {
function = "flash";
full-duplex;
};
};
+
+&ssusb {
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
#include <dt-bindings/power/mt7629-power.h>
#include <dt-bindings/reset/mt7629-reset.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
compatible = "mediatek,mt7622";
reg = <0x10212000 0x800>;
};
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&watchdog>;
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
status = "disabled";
};
+ ssusbsys: ssusbsys@1a000000 {
+ compatible = "mediatek,mt7622-ssusbsys",
+ "syscon";
+ reg = <0x1a000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pciesys: pciesys@1a100800 {
+ compatible = "mediatek,mt7622-pciesys", "syscon";
+ reg = <0x1a100800 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pcie: pcie@1a140000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1a140000 0x1000>,
+ <0x1a143000 0x1000>,
+ <0x1a145000 0x1000>;
+ reg-names = "subsys", "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P1_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+ "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+ "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+ power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ pcie0: pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ sata: sata@1a200000 {
+ compatible = "mediatek,mtk-ahci";
+ reg = <0x1a200000 0x1100>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ ports-implemented = <0x1>;
+ phys = <&sata_port PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ status = "okay";
+ };
+
+ sata_phy: sata-phy@1a243000 {
+ compatible = "mediatek,generic-tphy-v1";
+ reg = <0x1a243000 0x0100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "okay";
+
+ sata_port: sata-phy@1a243000 {
+ reg = <0x1a243000 0x0100>;
+ clocks = <&topckgen CLK_TOP_ETH_500M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ ssusb: usb@1a0c0000 {
+ compatible = "mediatek,mt7622-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0x1a0c0000 0x01000>,
+ <0x1a0c4700 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF1>;
+ clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+ <&ssusbsys CLK_SSUSB_REF_EN>,
+ <&ssusbsys CLK_SSUSB_MCU_EN>,
+ <&ssusbsys CLK_SSUSB_DMA_EN>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+ status = "disabled";
+ };
+
+ u3phy: usb-phy@1a0c4000 {
+ compatible = "mediatek,mt7622-u3phy",
+ "mediatek,generic-tphy-v1";
+ reg = <0x1a0c4000 0x700>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy@1a0c4800 {
+ reg = <0x1a0c4800 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy@1a0c4900 {
+ reg = <0x1a0c4900 0x0700>;
+ #phy-cells = <1>;
+ };
+
+ u2port1: usb-phy@1a0c5000 {
+ reg = <0x1a0c5000 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+ clock-names = "ref";
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys", "syscon";
reg = <0x1b000000 0x1000>;
};
};
+ usb1: usb@1a1c0000 {
+ compatible = "mediatek,mt7623-xhci", "mediatek,mtk-xhci";
+ reg = <0x1a1c0000 0x1000>, <0x1a1c4700 0x0100>;
+ reg-names = "mac", "ippc";
+ power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+ clocks = <&hifsys CLK_HIFSYS_USB0PHY>, <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ref_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy1: usb-phy@1a1c4000 {
+ compatible = "mediatek,mt7623-tphy", "mediatek,generic-tphy-v1";
+
+ reg = <0x1a1c4000 0x0700>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy@1a1c4800 {
+ reg = <0x1a1c4800 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy@1a1c4900 {
+ reg = <0x1a1c4900 0x0700>;
+ #phy-cells = <1>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ };
+ };
+
+ usb2: usb@1a240000 {
+ compatible = "mediatek,mt7623-xhci", "mediatek,mtk-xhci";
+ reg = <0x1a240000 0x1000>, <0x1a244700 0x0100>;
+ reg-names = "mac", "ippc";
+ power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+ clocks = <&hifsys CLK_HIFSYS_USB1PHY>, <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ref_ck";
+ phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
u3phy2: usb-phy@1a244000 {
compatible = "mediatek,generic-tphy-v1";
reg = <0x1a244000 0x0700>;
pinctrl-0 = <&uart2_pins_a>;
status = "okay";
};
+
+&usb1 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
dr_mode = "host";
status = "okay";
};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Arm Limited
+ */
+
+/dts-v1/;
+
+/ {
+ model = "total_compute";
+ compatible = "arm,total_compute";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ sysreg: sysreg@1c010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x0 0x001c010000 0x0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ fixed_3v3: v2m-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmci@1c050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x0 0x001c050000 0x0 0x1000>;
+ cd-gpios = <&sysreg 0 0>;
+ arm,primecell-periphid = <0x00880180>;
+ wp-gpios = <&sysreg 1 0>;
+ bus-width = <8>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&fixed_3v3>;
+ clocks = <&clock24mhz>, <&clock24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ clock24mhz: clock24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "bp:clock24mhz";
+ };
+};
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
aliases {
serial0 = &serial0;
- serial1 = &serial1;
+ serial1 = &serialsc;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
interrupts = <0 8>;
};
+&serialsc {
+ interrupts = <0 8>;
+};
+
&serial0 {
status = "okay";
};
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
aliases {
serial0 = &serial0;
- serial1 = &serial1;
+ serial1 = &serialsc;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
interrupts = <0 8>;
};
+&serialsc {
+ interrupts = <0 8>;
+};
+
&serial0 {
status = "okay";
};
};
&mdio {
- ethphy: ethphy@0 {
+ ethphy: ethernet-phy@0 {
reg = <0>;
};
};
compatible = "socionext,uniphier-ld20-pcie-phy";
reg = <0x66038000 0x4000>;
#phy-cells = <0>;
+ clock-names = "link";
clocks = <&sys_clk 24>;
+ reset-names = "link";
resets = <&sys_rst 24>;
socionext,syscon = <&soc_glue>;
};
aliases {
serial0 = &serial0;
- serial1 = &serial1;
+ serial1 = &serialsc;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
interrupts = <1 8>;
};
+&serialsc {
+ interrupts = <1 8>;
+};
+
&serial0 {
status = "okay";
};
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
+ serial3 = &serialsc;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
interrupts = <4 8>;
};
+&serialsc {
+ interrupts = <4 8>;
+};
+
&serial0 {
status = "okay";
};
};
&mdio {
- ethphy: ethphy@0 {
+ ethphy: ethernet-phy@0 {
reg = <0>;
};
};
function = "nand";
};
+ pinctrl_pcie: pcie {
+ groups = "pcie";
+ function = "pcie";
+ };
+
pinctrl_sd: sd {
groups = "sd";
function = "sd";
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
- serial3 = &serial3;
+ serial3 = &serialsc;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
interrupts = <2 8>;
};
+&serialsc {
+ interrupts = <2 8>;
+};
+
&serial0 {
status = "okay";
};
};
&mdio {
- ethphy: ethphy@0 {
+ ethphy: ethernet-phy@0 {
reg = <0>;
};
};
i2c3 = &i2c3;
i2c5 = &i2c5;
i2c6 = &i2c6;
+ ethernet0 = ð
};
memory@80000000 {
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
};
};
- usb0: usb@65b00000 {
- compatible = "socionext,uniphier-pro5-dwc3";
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
- reg = <0x65b00000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 134 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- dwc3@65a00000 {
- compatible = "snps,dwc3";
- reg = <0x65a00000 0x10000>;
- interrupts = <0 134 4>;
- dr_mode = "host";
- tx-fifo-resize;
- };
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+ dr_mode = "host";
};
- usb1: usb@65d00000 {
- compatible = "socionext,uniphier-pro5-dwc3";
- status = "disabled";
- reg = <0x65d00000 0x1000>;
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro5-dwc3-glue",
+ "simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pro5-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pro5-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_hsphy0: hs-phy@280 {
+ compatible = "socionext,uniphier-pro5-usb3-hsphy";
+ reg = <0x280 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy0: ss-phy@380 {
+ compatible = "socionext,uniphier-pro5-usb3-ssphy";
+ reg = <0x380 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 137 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
- dwc3@65c00000 {
- compatible = "snps,dwc3";
- reg = <0x65c00000 0x10000>;
- interrupts = <0 137 4>;
- dr_mode = "host";
- tx-fifo-resize;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro5-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pro5-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
};
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pro5-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pro5-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_hsphy0: hs-phy@280 {
+ compatible = "socionext,uniphier-pro5-usb3-hsphy";
+ reg = <0x280 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+
+ usb1_hsphy1: hs-phy@290 {
+ compatible = "socionext,uniphier-pro5-usb3-hsphy";
+ reg = <0x290 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ vbus-supply = <&usb1_vbus1>;
+ };
+
+ usb1_ssphy0: ss-phy@380 {
+ compatible = "socionext,uniphier-pro5-usb3-ssphy";
+ reg = <0x380 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
+ pcie_ep: pcie-ep@66000000 {
+ compatible = "socionext,uniphier-pro5-pcie-ep",
+ "snps,dw-pcie-ep";
+ status = "disabled";
+ reg-names = "dbi", "dbi2", "link", "addr_space";
+ reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+ <0x66010000 0x10000>, <0x67000000 0x400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 24>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 24>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ num-lanes = <4>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ };
+
+ pcie_phy: phy@66038000 {
+ compatible = "socionext,uniphier-pro5-pcie-phy";
+ reg = <0x66038000 0x4000>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 24>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 24>;
};
nand: nand-controller@68000000 {
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
};
&mdio {
- ethphy: ethphy@1 {
+ ethphy: ethernet-phy@1 {
reg = <1>;
};
};
aliases {
serial0 = &serial0;
- serial1 = &serial1;
+ serial1 = &serialsc;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
interrupts = <4 8>;
};
+&serialsc {
+ interrupts = <4 8>;
+};
+
&spi0 {
status = "okay";
};
};
&mdio0 {
- ethphy0: ethphy@0 {
+ ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
};
&mdio1 {
- ethphy1: ethphy@0 {
+ ethphy1: ethernet-phy@0 {
reg = <0>;
};
};
compatible = "socionext,uniphier-pxs3-pcie-phy";
reg = <0x66038000 0x4000>;
#phy-cells = <0>;
+ clock-names = "link";
clocks = <&sys_clk 24>;
+ reset-names = "link";
resets = <&sys_rst 24>;
socionext,syscon = <&soc_glue>;
};
aliases {
serial0 = &serial0;
- serial1 = &serial1;
+ serial1 = &serialsc;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
interrupts = <0 8>;
};
+&serialsc {
+ interrupts = <0 8>;
+};
+
&serial0 {
status = "okay";
};
&system_bus {
status = "okay";
ranges = <1 0x00000000 0x42000000 0x02000000>;
+ interrupt-parent = <&gpio>;
- support_card: support-card@1,1f00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00000000 1 0x01f00000 0x00100000>;
- interrupt-parent = <&gpio>;
-
- ethsc: ethernet@0 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <0x00000000 0x1000>;
- phy-mode = "mii";
- reg-io-width = <4>;
- };
+ ethsc: ethernet@1,1f00000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <1 0x01f00000 0x1000>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ };
- serialsc: uart@b0000 {
- compatible = "ns16550a";
- reg = <0x000b0000 0x20>;
- clock-frequency = <12288000>;
- reg-shift = <1>;
- };
+ serialsc: serial@1,1fb0000 {
+ compatible = "ns16550a";
+ reg = <1 0x01fb0000 0x20>;
+ clock-frequency = <12288000>;
+ reg-shift = <1>;
};
};
clocks = <&clk25 &clk25>;
xlnx,device_id = <0>;
no-1-8-v;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
#stream-id-cells = <1>;
};
};
clocks = <&clk25 &clk25>;
xlnx,device_id = <1>;
no-1-8-v;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
#stream-id-cells = <1>;
};
};
status = "okay";
no-1-8-v;
disable-wp;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&gem0 {
non-removable;
disable-wp;
bus-width = <8>;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
};
&uart0 { /* uart0 MIO38-39 */
non-removable;
disable-wp;
bus-width = <8>;
- xlnx,mio_bank = <0>; /* FIXME tap delay */
+ xlnx,mio-bank = <0>; /* FIXME tap delay */
};
&uart0 { /* uart0 MIO38-39 */
status = "disable";
no-1-8-v;
disable-wp;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&gem0 {
non-removable;
disable-wp;
bus-width = <8>;
- xlnx,mio_bank = <0>; /* FIXME tap delay */
+ xlnx,mio-bank = <0>; /* FIXME tap delay */
};
&uart0 { /* uart0 MIO38-39 */
status = "disable";
no-1-8-v;
disable-wp;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&gem0 {
non-removable;
disable-wp;
bus-width = <8>;
- xlnx,mio_bank = <0>; /* FIXME tap delay */
+ xlnx,mio-bank = <0>; /* FIXME tap delay */
};
&uart0 { /* uart0 MIO38-39 */
status = "disable";
no-1-8-v;
disable-wp;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&gem0 {
non-removable;
disable-wp;
bus-width = <8>;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
};
&uart0 { /* uart0 MIO38-39 */
status = "okay";
no-1-8-v;
disable-wp;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&gem0 {
non-removable;
disable-wp; /* We don't have a write-protect detection */
bus-width = <8>;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
disable-wp; /* We don't have a write-protect detection */
bus-width = <4>;
};
&sdhci0 {
status = "okay";
bus-width = <8>;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
};
/* SD1 with level shifter */
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&uart0 {
status = "okay";
no-1-8-v;
disable-wp;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
};
&sdhci1 {
status = "okay";
bus-width = <0x4>;
- xlnx,mio_bank = <0>;
+ xlnx,mio-bank = <0>;
non-removable;
disable-wp;
cap-power-off-card;
* removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&serdes {
&sdhci1 {
status = "okay";
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
disable-wp;
};
&sdhci1 {
status = "okay";
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
disable-wp;
};
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&serdes {
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&serdes {
* removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&serdes {
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
- xlnx,mio_bank = <1>;
+ xlnx,mio-bank = <1>;
};
&serdes {
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <asm/arch/soc.h>
+
+#define MAX_LMAC_PER_BGX 4
+#define LMAC_CNT MAX_LMAC_PER_BGX
+
+#if defined(CONFIG_TARGET_OCTEONTX_81XX)
+
+/** Maximum number of BGX interfaces per CPU node */
+#define MAX_BGX_PER_NODE 3
+#define OCTEONTX_XCV /* RGMII Interface */
+
+#elif defined(CONFIG_TARGET_OCTEONTX_83XX)
+
+/** Maximum number of BGX interfaces per CPU node */
+#define MAX_BGX_PER_NODE 4
+
+#endif
+
+/** Reg offsets */
+#define RST_BOOT 0x87E006001600ULL
+
+/** Structure definitions */
+
+/**
+ * Register (RSL) rst_boot
+ *
+ * RST Boot Register This register is not accessible through ROM scripts;
+ * see SCR_WRITE32_S[ADDR].
+ */
+union rst_boot {
+ u64 u;
+ struct rst_boot_s {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 reserved_2_32 : 31;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_52 : 6;
+ u64 gpio_ejtag : 1;
+ u64 mcp_jtagdis : 1;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 reserved_61_62 : 2;
+ u64 chipkill : 1;
+ } s;
+ struct rst_boot_cn81xx {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 lboot : 10;
+ u64 lboot_ext23 : 6;
+ u64 lboot_ext45 : 6;
+ u64 lboot_jtg : 1;
+ u64 lboot_ckill : 1;
+ u64 reserved_26_29 : 4;
+ u64 lboot_oci : 3;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_54 : 8;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 ejtagdis : 1;
+ u64 jtcsrdis : 1;
+ u64 chipkill : 1;
+ } cn81xx;
+ struct rst_boot_cn83xx {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 lboot : 10;
+ u64 lboot_ext23 : 6;
+ u64 lboot_ext45 : 6;
+ u64 lboot_jtg : 1;
+ u64 lboot_ckill : 1;
+ u64 lboot_pf_flr : 4;
+ u64 lboot_oci : 3;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_54 : 8;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 ejtagdis : 1;
+ u64 jtcsrdis : 1;
+ u64 chipkill : 1;
+ } cn83xx;
+};
+
+extern unsigned long fdt_base_addr;
+
+/** Function definitions */
+void mem_map_fill(void);
+int octeontx_board_has_pmp(void);
+const char *fdt_get_board_model(void);
+const char *fdt_get_board_serial(void);
+const char *fdt_get_board_revision(void);
+void fdt_parse_phy_info(void);
+void fdt_board_get_ethaddr(int bgx, int lmac, unsigned char *eth);
+void bgx_set_board_info(int bgx_id, int *mdio_bus, int *phy_addr,
+ bool *autoneg_dis, bool *lmac_reg, bool *lmac_enable);
+#endif /* __BOARD_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+/** System PLL reference clock */
+#define PLL_REF_CLK 50000000 /* 50 MHz */
+#define NS_PER_REF_CLK_TICK (1000000000 / PLL_REF_CLK)
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void);
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void);
+
+#endif /* __CLOCK_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_MIO_EMM_H__
+#define __CSRS_MIO_EMM_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * MIO_EMM.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration mio_emm_bar_e
+ *
+ * eMMC Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8_SIZE 0x800000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9_SIZE 0x10000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4 (0x87e009f00000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration mio_emm_int_vec_e
+ *
+ * eMMC MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define MIO_EMM_INT_VEC_E_DMA_INT_DONE (8)
+#define MIO_EMM_INT_VEC_E_DMA_INT_FIFO (7)
+#define MIO_EMM_INT_VEC_E_EMM_BUF_DONE (0)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_DONE (1)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_ERR (3)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_DONE (2)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_ERR (4)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_DONE (5)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_ERR (6)
+#define MIO_EMM_INT_VEC_E_NCB_FLT (9)
+#define MIO_EMM_INT_VEC_E_NCB_RAS (0xa)
+
+/**
+ * Register (RSL) mio_emm_access_wdog
+ *
+ * eMMC Access Watchdog Register
+ */
+union mio_emm_access_wdog {
+ u64 u;
+ struct mio_emm_access_wdog_s {
+ u64 clk_cnt : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct mio_emm_access_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+{
+ return 0x20f0;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_dat
+ *
+ * eMMC Data Buffer Access Register
+ */
+union mio_emm_buf_dat {
+ u64 u;
+ struct mio_emm_buf_dat_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_buf_dat_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_DAT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_DAT(void)
+{
+ return 0x20e8;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_idx
+ *
+ * eMMC Data Buffer Address Register
+ */
+union mio_emm_buf_idx {
+ u64 u;
+ struct mio_emm_buf_idx_s {
+ u64 offset : 6;
+ u64 buf_num : 1;
+ u64 reserved_7_15 : 9;
+ u64 inc : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct mio_emm_buf_idx_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_IDX(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_IDX(void)
+{
+ return 0x20e0;
+}
+
+/**
+ * Register (RSL) mio_emm_calb
+ *
+ * eMMC Calbration Register This register initiates delay line
+ * characterization.
+ */
+union mio_emm_calb {
+ u64 u;
+ struct mio_emm_calb_s {
+ u64 start : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct mio_emm_calb_s cn; */
+};
+
+static inline u64 MIO_EMM_CALB(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CALB(void)
+{
+ return 0x20c0;
+}
+
+/**
+ * Register (RSL) mio_emm_cfg
+ *
+ * eMMC Configuration Register
+ */
+union mio_emm_cfg {
+ u64 u;
+ struct mio_emm_cfg_s {
+ u64 bus_ena : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct mio_emm_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CFG(void)
+{
+ return 0x2000;
+}
+
+/**
+ * Register (RSL) mio_emm_cmd
+ *
+ * eMMC Command Register
+ */
+union mio_emm_cmd {
+ u64 u;
+ struct mio_emm_cmd_s {
+ u64 arg : 32;
+ u64 cmd_idx : 6;
+ u64 rtype_xor : 3;
+ u64 ctype_xor : 2;
+ u64 reserved_43_48 : 6;
+ u64 offset : 6;
+ u64 dbuf : 1;
+ u64 reserved_56_58 : 3;
+ u64 cmd_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct mio_emm_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_CMD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CMD(void)
+{
+ return 0x2058;
+}
+
+/**
+ * Register (RSL) mio_emm_comp
+ *
+ * eMMC Compensation Register
+ */
+union mio_emm_comp {
+ u64 u;
+ struct mio_emm_comp_s {
+ u64 nctl : 3;
+ u64 reserved_3_7 : 5;
+ u64 pctl : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct mio_emm_comp_s cn; */
+};
+
+static inline u64 MIO_EMM_COMP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_COMP(void)
+{
+ return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_debug
+ *
+ * eMMC Debug Register
+ */
+union mio_emm_debug {
+ u64 u;
+ struct mio_emm_debug_s {
+ u64 clk_on : 1;
+ u64 reserved_1_7 : 7;
+ u64 cmd_sm : 4;
+ u64 data_sm : 4;
+ u64 dma_sm : 4;
+ u64 emmc_clk_disable : 1;
+ u64 rdsync_rst : 1;
+ u64 reserved_22_63 : 42;
+ } s;
+ struct mio_emm_debug_cn96xxp1 {
+ u64 clk_on : 1;
+ u64 reserved_1_7 : 7;
+ u64 cmd_sm : 4;
+ u64 data_sm : 4;
+ u64 dma_sm : 4;
+ u64 reserved_20_63 : 44;
+ } cn96xxp1;
+ /* struct mio_emm_debug_s cn96xxp3; */
+ /* struct mio_emm_debug_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 MIO_EMM_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DEBUG(void)
+{
+ return 0x20f8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma
+ *
+ * eMMC External DMA Configuration Register
+ */
+union mio_emm_dma {
+ u64 u;
+ struct mio_emm_dma_s {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 rel_wr : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 extra_args : 1;
+ } s;
+ struct mio_emm_dma_cn8 {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 rel_wr : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 reserved_63 : 1;
+ } cn8;
+ struct mio_emm_dma_cn9 {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 reserved_50 : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 extra_args : 1;
+ } cn9;
+};
+
+static inline u64 MIO_EMM_DMA(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA(void)
+{
+ return 0x2050;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_adr
+ *
+ * eMMC DMA Address Register This register sets the address for eMMC/SD
+ * flash transfers to/from memory. Sixty-four-bit operations must be used
+ * to access this register. This register is updated by the DMA hardware
+ * and can be reloaded by the values placed in the MIO_EMM_DMA_FIFO_ADR.
+ */
+union mio_emm_dma_adr {
+ u64 u;
+ struct mio_emm_dma_adr_s {
+ u64 adr : 53;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_dma_adr_cn8 {
+ u64 adr : 49;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_dma_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ADR(void)
+{
+ return 0x188;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_arg
+ *
+ * eMMC External DMA Extra Arguments Register
+ */
+union mio_emm_dma_arg {
+ u64 u;
+ struct mio_emm_dma_arg_s {
+ u64 cmd23_args : 8;
+ u64 force_pgm : 1;
+ u64 context_id : 4;
+ u64 tag_req : 1;
+ u64 pack_cmd : 1;
+ u64 rel_wr : 1;
+ u64 alt_cmd : 6;
+ u64 skip_blk_cmd : 1;
+ u64 reserved_23_31 : 9;
+ u64 alt_cmd_arg : 32;
+ } s;
+ /* struct mio_emm_dma_arg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_ARG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ARG(void)
+{
+ return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_cfg
+ *
+ * eMMC DMA Configuration Register This register controls the internal
+ * DMA engine used with the eMMC/SD flash controller. Sixty- four-bit
+ * operations must be used to access this register. This register is
+ * updated by the hardware DMA engine and can also be reloaded by writes
+ * to the MIO_EMM_DMA_FIFO_CMD register.
+ */
+union mio_emm_dma_cfg {
+ u64 u;
+ struct mio_emm_dma_cfg_s {
+ u64 reserved_0_35 : 36;
+ u64 size : 20;
+ u64 endian : 1;
+ u64 swap8 : 1;
+ u64 swap16 : 1;
+ u64 swap32 : 1;
+ u64 reserved_60 : 1;
+ u64 clr : 1;
+ u64 rw : 1;
+ u64 en : 1;
+ } s;
+ /* struct mio_emm_dma_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_CFG(void)
+{
+ return 0x180;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_adr
+ *
+ * eMMC Internal DMA FIFO Address Register This register specifies the
+ * internal address that is loaded into the eMMC internal DMA FIFO. The
+ * FIFO is used to queue up operations for the
+ * MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR when the DMA completes successfully.
+ */
+union mio_emm_dma_fifo_adr {
+ u64 u;
+ struct mio_emm_dma_fifo_adr_s {
+ u64 reserved_0_2 : 3;
+ u64 adr : 50;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_dma_fifo_adr_cn8 {
+ u64 reserved_0_2 : 3;
+ u64 adr : 46;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_dma_fifo_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+{
+ return 0x170;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cfg
+ *
+ * eMMC Internal DMA FIFO Configuration Register This register controls
+ * DMA FIFO operations.
+ */
+union mio_emm_dma_fifo_cfg {
+ u64 u;
+ struct mio_emm_dma_fifo_cfg_s {
+ u64 count : 5;
+ u64 reserved_5_7 : 3;
+ u64 int_lvl : 5;
+ u64 reserved_13_15 : 3;
+ u64 clr : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct mio_emm_dma_fifo_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+{
+ return 0x160;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cmd
+ *
+ * eMMC Internal DMA FIFO Command Register This register specifies a
+ * command that is loaded into the eMMC internal DMA FIFO. The FIFO is
+ * used to queue up operations for the MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR
+ * when the DMA completes successfully. Writes to this register store
+ * both the MIO_EMM_DMA_FIFO_CMD and the MIO_EMM_DMA_FIFO_ADR contents
+ * into the FIFO and increment the MIO_EMM_DMA_FIFO_CFG[COUNT] field.
+ * Note: This register has a similar format to MIO_EMM_DMA_CFG with the
+ * exception that the EN and CLR fields are absent. These are supported
+ * in MIO_EMM_DMA_FIFO_CFG.
+ */
+union mio_emm_dma_fifo_cmd {
+ u64 u;
+ struct mio_emm_dma_fifo_cmd_s {
+ u64 reserved_0_35 : 36;
+ u64 size : 20;
+ u64 endian : 1;
+ u64 swap8 : 1;
+ u64 swap16 : 1;
+ u64 swap32 : 1;
+ u64 intdis : 1;
+ u64 reserved_61 : 1;
+ u64 rw : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct mio_emm_dma_fifo_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+{
+ return 0x178;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int
+ *
+ * eMMC DMA Interrupt Register Sixty-four-bit operations must be used to
+ * access this register.
+ */
+union mio_emm_dma_int {
+ u64 u;
+ struct mio_emm_dma_int_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT(void)
+{
+ return 0x190;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1c
+ *
+ * eMMC DMA Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union mio_emm_dma_int_ena_w1c {
+ u64 u;
+ struct mio_emm_dma_int_ena_w1c_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_ena_w1c_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+{
+ return 0x1a8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1s
+ *
+ * eMMC DMA Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union mio_emm_dma_int_ena_w1s {
+ u64 u;
+ struct mio_emm_dma_int_ena_w1s_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_ena_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+{
+ return 0x1a0;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_w1s
+ *
+ * eMMC DMA Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_dma_int_w1s {
+ u64 u;
+ struct mio_emm_dma_int_w1s_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+{
+ return 0x198;
+}
+
+/**
+ * Register (RSL) mio_emm_int
+ *
+ * eMMC Interrupt Register
+ */
+union mio_emm_int {
+ u64 u;
+ struct mio_emm_int_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT(void)
+{
+ return 0x2078;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1c
+ *
+ * eMMC Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union mio_emm_int_ena_w1c {
+ u64 u;
+ struct mio_emm_int_ena_w1c_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_ena_w1c_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_ena_w1c_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+{
+ return 0x20b8;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1s
+ *
+ * eMMC Interrupt Enable Set Register This register sets interrupt enable
+ * bits.
+ */
+union mio_emm_int_ena_w1s {
+ u64 u;
+ struct mio_emm_int_ena_w1s_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_ena_w1s_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_ena_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+{
+ return 0x20b0;
+}
+
+/**
+ * Register (RSL) mio_emm_int_w1s
+ *
+ * eMMC Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_int_w1s {
+ u64 u;
+ struct mio_emm_int_w1s_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_w1s_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_W1S(void)
+{
+ return 0x2080;
+}
+
+/**
+ * Register (RSL) mio_emm_io_ctl
+ *
+ * eMMC I/O Control Register
+ */
+union mio_emm_io_ctl {
+ u64 u;
+ struct mio_emm_io_ctl_s {
+ u64 slew : 1;
+ u64 reserved_1 : 1;
+ u64 drive : 2;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct mio_emm_io_ctl_s cn; */
+};
+
+static inline u64 MIO_EMM_IO_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_IO_CTL(void)
+{
+ return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_mode#
+ *
+ * eMMC Operating Mode Register
+ */
+union mio_emm_modex {
+ u64 u;
+ struct mio_emm_modex_s {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 clk_swap : 1;
+ u64 reserved_37_39 : 3;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_63 : 13;
+ } s;
+ struct mio_emm_modex_cn8 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ struct mio_emm_modex_cn96xxp1 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_63 : 13;
+ } cn96xxp1;
+ /* struct mio_emm_modex_s cn96xxp3; */
+ /* struct mio_emm_modex_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_MODEX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MODEX(u64 a)
+{
+ return 0x2008 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_pba#
+ *
+ * eMMC MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_pbax {
+ u64 u;
+ struct mio_emm_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct mio_emm_msix_pbax_s cn; */
+};
+
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+{
+ return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_addr
+ *
+ * eMMC MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_addr {
+ u64 u;
+ struct mio_emm_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 51;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_msix_vecx_addr_cn8 {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 47;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_msix_vecx_addr_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+{
+ return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_ctl
+ *
+ * eMMC MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_ctl {
+ u64 u;
+ struct mio_emm_msix_vecx_ctl_s {
+ u64 data : 32;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ struct mio_emm_msix_vecx_ctl_cn8 {
+ u64 data : 20;
+ u64 reserved_20_31 : 12;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } cn8;
+ /* struct mio_emm_msix_vecx_ctl_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+{
+ return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_rca
+ *
+ * eMMC Relative Card Address Register
+ */
+union mio_emm_rca {
+ u64 u;
+ struct mio_emm_rca_s {
+ u64 card_rca : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct mio_emm_rca_s cn; */
+};
+
+static inline u64 MIO_EMM_RCA(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RCA(void)
+{
+ return 0x20a0;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_hi
+ *
+ * eMMC Response Data High Register
+ */
+union mio_emm_rsp_hi {
+ u64 u;
+ struct mio_emm_rsp_hi_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_rsp_hi_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_HI(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_HI(void)
+{
+ return 0x2070;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_lo
+ *
+ * eMMC Response Data Low Register
+ */
+union mio_emm_rsp_lo {
+ u64 u;
+ struct mio_emm_rsp_lo_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_rsp_lo_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_LO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_LO(void)
+{
+ return 0x2068;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_sts
+ *
+ * eMMC Response Status Register
+ */
+union mio_emm_rsp_sts {
+ u64 u;
+ struct mio_emm_rsp_sts_s {
+ u64 cmd_done : 1;
+ u64 cmd_idx : 6;
+ u64 cmd_type : 2;
+ u64 rsp_type : 3;
+ u64 rsp_val : 1;
+ u64 rsp_bad_sts : 1;
+ u64 rsp_crc_err : 1;
+ u64 rsp_timeout : 1;
+ u64 stp_val : 1;
+ u64 stp_bad_sts : 1;
+ u64 stp_crc_err : 1;
+ u64 stp_timeout : 1;
+ u64 rsp_busybit : 1;
+ u64 blk_crc_err : 1;
+ u64 blk_timeout : 1;
+ u64 dbuf : 1;
+ u64 reserved_24_27 : 4;
+ u64 dbuf_err : 1;
+ u64 reserved_29_54 : 26;
+ u64 acc_timeout : 1;
+ u64 dma_pend : 1;
+ u64 dma_val : 1;
+ u64 switch_val : 1;
+ u64 cmd_val : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } s;
+ /* struct mio_emm_rsp_sts_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_STS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_STS(void)
+{
+ return 0x2060;
+}
+
+/**
+ * Register (RSL) mio_emm_sample
+ *
+ * eMMC Sampling Register
+ */
+union mio_emm_sample {
+ u64 u;
+ struct mio_emm_sample_s {
+ u64 dat_cnt : 10;
+ u64 reserved_10_15 : 6;
+ u64 cmd_cnt : 10;
+ u64 reserved_26_63 : 38;
+ } s;
+ /* struct mio_emm_sample_s cn; */
+};
+
+static inline u64 MIO_EMM_SAMPLE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SAMPLE(void)
+{
+ return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_sts_mask
+ *
+ * eMMC Status Mask Register
+ */
+union mio_emm_sts_mask {
+ u64 u;
+ struct mio_emm_sts_mask_s {
+ u64 sts_msk : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct mio_emm_sts_mask_s cn; */
+};
+
+static inline u64 MIO_EMM_STS_MASK(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_STS_MASK(void)
+{
+ return 0x2098;
+}
+
+/**
+ * Register (RSL) mio_emm_switch
+ *
+ * eMMC Operating Mode Switch Register This register allows software to
+ * change eMMC related parameters associated with a specific BUS_ID. The
+ * MIO_EMM_MODE() registers contain the current setting for each BUS.
+ * This register is also used to switch the [CLK_HI] and [CLK_LO]
+ * settings associated with the common EMMC_CLK. These settings can only
+ * be changed when [BUS_ID] = 0.
+ */
+union mio_emm_switch {
+ u64 u;
+ struct mio_emm_switch_s {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 clk_swap : 1;
+ u64 reserved_37_39 : 3;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_55 : 5;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } s;
+ struct mio_emm_switch_cn8 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 reserved_49_55 : 7;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } cn8;
+ struct mio_emm_switch_cn96xxp1 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_55 : 5;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } cn96xxp1;
+ /* struct mio_emm_switch_s cn96xxp3; */
+ /* struct mio_emm_switch_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_SWITCH(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SWITCH(void)
+{
+ return 0x2048;
+}
+
+/**
+ * Register (RSL) mio_emm_tap
+ *
+ * eMMC TAP Delay Register This register indicates the delay line
+ * characteristics.
+ */
+union mio_emm_tap {
+ u64 u;
+ struct mio_emm_tap_s {
+ u64 delay : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct mio_emm_tap_s cn; */
+};
+
+static inline u64 MIO_EMM_TAP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TAP(void)
+{
+ return 0x20c8;
+}
+
+/**
+ * Register (RSL) mio_emm_timing
+ *
+ * eMMC Timing Register This register determines the number of tap delays
+ * the EMM_DAT, EMM_DS, and EMM_CMD lines are transmitted or received in
+ * relation to EMM_CLK. These values should only be changed when the eMMC
+ * bus is idle.
+ */
+union mio_emm_timing {
+ u64 u;
+ struct mio_emm_timing_s {
+ u64 data_out_tap : 6;
+ u64 reserved_6_15 : 10;
+ u64 data_in_tap : 6;
+ u64 reserved_22_31 : 10;
+ u64 cmd_out_tap : 6;
+ u64 reserved_38_47 : 10;
+ u64 cmd_in_tap : 6;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct mio_emm_timing_s cn; */
+};
+
+static inline u64 MIO_EMM_TIMING(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TIMING(void)
+{
+ return 0x20d0;
+}
+
+/**
+ * Register (RSL) mio_emm_wdog
+ *
+ * eMMC Watchdog Register
+ */
+union mio_emm_wdog {
+ u64 u;
+ struct mio_emm_wdog_s {
+ u64 clk_cnt : 26;
+ u64 reserved_26_63 : 38;
+ } s;
+ /* struct mio_emm_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_WDOG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_WDOG(void)
+{
+ return 0x2088;
+}
+
+#endif /* __CSRS_MIO_EMM_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_XCV_H__
+#define __CSRS_XCV_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * XCV.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration xcv_bar_e
+ *
+ * XCV Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define XCV_BAR_E_XCVX_PF_BAR0(a) (0x87e0db000000ll + 0ll * (a))
+#define XCV_BAR_E_XCVX_PF_BAR0_SIZE 0x100000ull
+#define XCV_BAR_E_XCVX_PF_BAR4(a) (0x87e0dbf00000ll + 0ll * (a))
+#define XCV_BAR_E_XCVX_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration xcv_int_vec_e
+ *
+ * XCV MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define XCV_INT_VEC_E_INT (0)
+
+/**
+ * Register (RSL) xcv#_batch_crd_ret
+ *
+ * XCV Batch Credit Return Register
+ */
+union xcvx_batch_crd_ret {
+ u64 u;
+ struct xcvx_batch_crd_ret_s {
+ u64 crd_ret : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct xcvx_batch_crd_ret_s cn; */
+};
+
+static inline u64 XCVX_BATCH_CRD_RET(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_BATCH_CRD_RET(u64 a)
+{
+ return 0x100 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_comp_ctl
+ *
+ * XCV Compensation Controller Register This register controls
+ * programmable compensation.
+ */
+union xcvx_comp_ctl {
+ u64 u;
+ struct xcvx_comp_ctl_s {
+ u64 nctl_sat : 1;
+ u64 reserved_1_26 : 26;
+ u64 nctl_lock : 1;
+ u64 reserved_28 : 1;
+ u64 pctl_sat : 1;
+ u64 pctl_lock : 1;
+ u64 reserved_31 : 1;
+ u64 drv_nctl : 5;
+ u64 reserved_37_39 : 3;
+ u64 drv_pctl : 5;
+ u64 reserved_45_47 : 3;
+ u64 cmp_nctl : 5;
+ u64 reserved_53_55 : 3;
+ u64 cmp_pctl : 5;
+ u64 reserved_61_62 : 2;
+ u64 drv_byp : 1;
+ } s;
+ /* struct xcvx_comp_ctl_s cn; */
+};
+
+static inline u64 XCVX_COMP_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_COMP_CTL(u64 a)
+{
+ return 0x20 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_ctl
+ *
+ * XCV Control Register This register contains the status control bits.
+ */
+union xcvx_ctl {
+ u64 u;
+ struct xcvx_ctl_s {
+ u64 speed : 2;
+ u64 lpbk_int : 1;
+ u64 lpbk_ext : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct xcvx_ctl_s cn; */
+};
+
+static inline u64 XCVX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_CTL(u64 a)
+{
+ return 0x30 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_dll_ctl
+ *
+ * XCV DLL Controller Register The RGMII timing specification requires
+ * that devices transmit clock and data synchronously. The specification
+ * requires external sources (namely the PC board trace routes) to
+ * introduce the appropriate 1.5 to 2.0 ns of delay. To eliminate the
+ * need for the PC board delays, the RGMII interface has optional on-
+ * board DLLs for both transmit and receive. For correct operation, at
+ * most one of the transmitter, board, or receiver involved in an RGMII
+ * link should introduce delay. By default/reset, the RGMII receivers
+ * delay the received clock, and the RGMII transmitters do not delay the
+ * transmitted clock. Whether this default works as-is with a given link
+ * partner depends on the behavior of the link partner and the PC board.
+ * These are the possible modes of RGMII receive operation: *
+ * XCV()_DLL_CTL[CLKRX_BYP] = 0 (reset value) - The RGMII receive
+ * interface introduces clock delay using its internal DLL. This mode is
+ * appropriate if neither the remote transmitter nor the PC board delays
+ * the clock. * XCV()_DLL_CTL[CLKRX_BYP] = 1, [CLKRX_SET] = 0x0 - The
+ * RGMII receive interface introduces no clock delay. This mode is
+ * appropriate if either the remote transmitter or the PC board delays
+ * the clock. These are the possible modes of RGMII transmit operation:
+ * * XCV()_DLL_CTL[CLKTX_BYP] = 1, [CLKTX_SET] = 0x0 (reset value) - The
+ * RGMII transmit interface introduces no clock delay. This mode is
+ * appropriate is either the remote receiver or the PC board delays the
+ * clock. * XCV()_DLL_CTL[CLKTX_BYP] = 0 - The RGMII transmit interface
+ * introduces clock delay using its internal DLL. This mode is
+ * appropriate if neither the remote receiver nor the PC board delays the
+ * clock.
+ */
+union xcvx_dll_ctl {
+ u64 u;
+ struct xcvx_dll_ctl_s {
+ u64 refclk_sel : 2;
+ u64 reserved_2_7 : 6;
+ u64 clktx_set : 7;
+ u64 clktx_byp : 1;
+ u64 clkrx_set : 7;
+ u64 clkrx_byp : 1;
+ u64 clk_set : 7;
+ u64 lock : 1;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct xcvx_dll_ctl_s cn; */
+};
+
+static inline u64 XCVX_DLL_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_DLL_CTL(u64 a)
+{
+ return 0x10 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_eco
+ *
+ * INTERNAL: XCV ECO Register
+ */
+union xcvx_eco {
+ u64 u;
+ struct xcvx_eco_s {
+ u64 eco_rw : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct xcvx_eco_s cn; */
+};
+
+static inline u64 XCVX_ECO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_ECO(u64 a)
+{
+ return 0x200 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_inbnd_status
+ *
+ * XCV Inband Status Register This register contains RGMII inband status.
+ */
+union xcvx_inbnd_status {
+ u64 u;
+ struct xcvx_inbnd_status_s {
+ u64 link : 1;
+ u64 speed : 2;
+ u64 duplex : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct xcvx_inbnd_status_s cn; */
+};
+
+static inline u64 XCVX_INBND_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INBND_STATUS(u64 a)
+{
+ return 0x80 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int
+ *
+ * XCV Interrupt Register This register flags error for TX FIFO overflow,
+ * TX FIFO underflow and incomplete byte for 10/100 Mode. It also flags
+ * status change for link duplex, link speed and link up/down.
+ */
+union xcvx_int {
+ u64 u;
+ struct xcvx_int_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_s cn; */
+};
+
+static inline u64 XCVX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT(u64 a)
+{
+ return 0x40 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_ena_w1c
+ *
+ * Loopback Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union xcvx_int_ena_w1c {
+ u64 u;
+ struct xcvx_int_ena_w1c_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_ena_w1c_s cn; */
+};
+
+static inline u64 XCVX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_ENA_W1C(u64 a)
+{
+ return 0x50 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_ena_w1s
+ *
+ * Loopback Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union xcvx_int_ena_w1s {
+ u64 u;
+ struct xcvx_int_ena_w1s_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_ena_w1s_s cn; */
+};
+
+static inline u64 XCVX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_ENA_W1S(u64 a)
+{
+ return 0x58 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_w1s
+ *
+ * Loopback Error Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union xcvx_int_w1s {
+ u64 u;
+ struct xcvx_int_w1s_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_w1s_s cn; */
+};
+
+static inline u64 XCVX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_W1S(u64 a)
+{
+ return 0x48 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_msix_pba#
+ *
+ * XCV MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_pbax {
+ u64 u;
+ struct xcvx_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct xcvx_msix_pbax_s cn; */
+};
+
+static inline u64 XCVX_MSIX_PBAX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_PBAX(u64 a, u64 b)
+{
+ return 0xf0000 + 0 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) xcv#_msix_vec#_addr
+ *
+ * XCV MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_vecx_addr {
+ u64 u;
+ struct xcvx_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 47;
+ u64 reserved_49_63 : 15;
+ } s;
+ /* struct xcvx_msix_vecx_addr_s cn; */
+};
+
+static inline u64 XCVX_MSIX_VECX_ADDR(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_VECX_ADDR(u64 a, u64 b)
+{
+ return 0 + 0 * a + 0x10 * b;
+}
+
+/**
+ * Register (RSL) xcv#_msix_vec#_ctl
+ *
+ * XCV MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_vecx_ctl {
+ u64 u;
+ struct xcvx_msix_vecx_ctl_s {
+ u64 data : 20;
+ u64 reserved_20_31 : 12;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct xcvx_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 XCVX_MSIX_VECX_CTL(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_VECX_CTL(u64 a, u64 b)
+{
+ return 8 + 0 * a + 0x10 * b;
+}
+
+/**
+ * Register (RSL) xcv#_reset
+ *
+ * XCV Reset Registers This register controls reset.
+ */
+union xcvx_reset {
+ u64 u;
+ struct xcvx_reset_s {
+ u64 rx_dat_rst_n : 1;
+ u64 rx_pkt_rst_n : 1;
+ u64 tx_dat_rst_n : 1;
+ u64 tx_pkt_rst_n : 1;
+ u64 reserved_4_6 : 3;
+ u64 comp : 1;
+ u64 reserved_8_10 : 3;
+ u64 dllrst : 1;
+ u64 reserved_12_14 : 3;
+ u64 clkrst : 1;
+ u64 reserved_16_62 : 47;
+ u64 enable : 1;
+ } s;
+ /* struct xcvx_reset_s cn; */
+};
+
+static inline u64 XCVX_RESET(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_RESET(u64 a)
+{
+ return 0 + 0 * a;
+}
+
+#endif /* __CSRS_XCV_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_H__
+#define __SMC_H__
+
+/* OcteonTX Service Calls version numbers */
+#define OCTEONTX_VERSION_MAJOR 0x1
+#define OCTEONTX_VERSION_MINOR 0x0
+
+/* x1 - node number */
+#define OCTEONTX_DRAM_SIZE 0xc2000301
+
+ssize_t smc_dram_size(unsigned int node);
+
+#endif /* __SMC_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SOC_H__
+#define __SOC_H__
+
+/* Product PARTNUM */
+#define CN81XX 0xA2
+#define CN83XX 0xA3
+#define CN96XX 0xB2
+#define CN95XX 0xB3
+
+#define otx_is_altpkg() read_alt_pkg()
+#define otx_is_soc(soc) (read_partnum() == (soc))
+#define otx_is_board(model) (!strcmp(read_board_name(), model))
+#define otx_is_platform(platform) (read_platform() == (platform))
+
+enum platform {
+ PLATFORM_HW = 0,
+ PLATFORM_EMULATOR = 1,
+ PLATFORM_ASIM = 3,
+};
+
+int read_platform(void);
+u8 read_partnum(void);
+const char *read_board_name(void);
+bool read_alt_pkg(void);
+
+#endif /* __SOC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <asm/arch/soc.h>
+
+/** Reg offsets */
+#define RST_BOOT 0x87E006001600ULL
+
+#define CPC_BOOT_OWNERX(a) 0x86D000000160ULL + (8 * (a))
+
+/** Structure definitions */
+/**
+ * Register (NCB32b) cpc_boot_owner#
+ *
+ * CPC Boot Owner Registers These registers control an external arbiter
+ * for the boot device (SPI/eMMC) across multiple external devices. There
+ * is a register for each requester: _ \<0\> - SCP - reset on
+ * SCP reset _ \<1\> - MCP - reset on MCP reset _ \<2\> - AP
+ * Secure - reset on core reset _ \<3\> - AP Nonsecure - reset on core
+ * reset These register is only writable to the corresponding
+ * requestor(s) permitted with CPC_PERMIT.
+ */
+union cpc_boot_ownerx {
+ u32 u;
+ struct cpc_boot_ownerx_s {
+ u32 boot_req : 1;
+ u32 reserved_1_7 : 7;
+ u32 boot_wait : 1;
+ u32 reserved_9_31 : 23;
+ } s;
+};
+
+/**
+ * Register (RSL) rst_boot
+ *
+ * RST Boot Register This register is not accessible through ROM scripts;
+ * see SCR_WRITE32_S[ADDR].
+ */
+union rst_boot {
+ u64 u;
+ struct rst_boot_s {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 reserved_2_32 : 31;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_52 : 6;
+ u64 gpio_ejtag : 1;
+ u64 mcp_jtagdis : 1;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 reserved_61_62 : 2;
+ u64 chipkill : 1;
+ } s;
+ struct rst_boot_cn96xx {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 reserved_2_23 : 22;
+ u64 cpt_mul : 7;
+ u64 reserved_31_32 : 2;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_52 : 6;
+ u64 gpio_ejtag : 1;
+ u64 mcp_jtagdis : 1;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 reserved_58_59 : 2;
+ u64 trusted_mode : 1;
+ u64 scp_jtagdis : 1;
+ u64 jtagdis : 1;
+ u64 chipkill : 1;
+ } cn96xx;
+ struct rst_boot_cnf95xx {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 reserved_2_7 : 6;
+ u64 bphy_mul : 7;
+ u64 reserved_15 : 1;
+ u64 dsp_mul : 7;
+ u64 reserved_23 : 1;
+ u64 cpt_mul : 7;
+ u64 reserved_31_32 : 2;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_52 : 6;
+ u64 gpio_ejtag : 1;
+ u64 mcp_jtagdis : 1;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 reserved_58_59 : 2;
+ u64 trusted_mode : 1;
+ u64 scp_jtagdis : 1;
+ u64 jtagdis : 1;
+ u64 chipkill : 1;
+ } cnf95xx;
+};
+
+extern unsigned long fdt_base_addr;
+
+/** Function definitions */
+void mem_map_fill(void);
+int fdt_get_board_mac_cnt(void);
+u64 fdt_get_board_mac_addr(void);
+const char *fdt_get_board_model(void);
+const char *fdt_get_board_serial(void);
+const char *fdt_get_board_revision(void);
+void octeontx2_board_get_mac_addr(u8 index, u8 *mac_addr);
+void board_acquire_flash_arb(bool acquire);
+void cgx_intf_shutdown(void);
+
+#endif /* __BOARD_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CLOCK_H__
+
+/** System PLL reference clock */
+#define PLL_REF_CLK 50000000 /* 50 MHz */
+#define NS_PER_REF_CLK_TICK (1000000000 / PLL_REF_CLK)
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void);
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void);
+
+#endif /* __CLOCK_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_CGX_H__
+#define __CSRS_CGX_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * CGX.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration cgx_bar_e
+ *
+ * CGX Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define CGX_BAR_E_CGXX_PF_BAR0(a) (0x87e0e0000000ll + 0x1000000ll * (a))
+#define CGX_BAR_E_CGXX_PF_BAR0_SIZE 0x100000ull
+#define CGX_BAR_E_CGXX_PF_BAR4(a) (0x87e0e0400000ll + 0x1000000ll * (a))
+#define CGX_BAR_E_CGXX_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration cgx_int_vec_e
+ *
+ * CGX MSI-X Vector Enumeration Enumeration the MSI-X interrupt vectors.
+ */
+#define CGX_INT_VEC_E_CMRX_INT(a) (0 + 9 * (a))
+#define CGX_INT_VEC_E_CMRX_SW(a) (0x26 + (a))
+#define CGX_INT_VEC_E_CMR_MEM_INT (0x24)
+#define CGX_INT_VEC_E_GMPX_GMI_RX_INT(a) (5 + 9 * (a))
+#define CGX_INT_VEC_E_GMPX_GMI_TX_INT(a) (6 + 9 * (a))
+#define CGX_INT_VEC_E_GMPX_GMI_WOL_INT(a) (7 + 9 * (a))
+#define CGX_INT_VEC_E_GMPX_PCS_INT(a) (4 + 9 * (a))
+#define CGX_INT_VEC_E_SMUX_RX_INT(a) (2 + 9 * (a))
+#define CGX_INT_VEC_E_SMUX_RX_WOL_INT(a) (8 + 9 * (a))
+#define CGX_INT_VEC_E_SMUX_TX_INT(a) (3 + 9 * (a))
+#define CGX_INT_VEC_E_SPUX_INT(a) (1 + 9 * (a))
+#define CGX_INT_VEC_E_SW (0x25)
+
+/**
+ * Enumeration cgx_lmac_types_e
+ *
+ * CGX LMAC Type Enumeration Enumerates the LMAC Types that CGX supports.
+ */
+#define CGX_LMAC_TYPES_E_FIFTYG_R (8)
+#define CGX_LMAC_TYPES_E_FORTYG_R (4)
+#define CGX_LMAC_TYPES_E_HUNDREDG_R (9)
+#define CGX_LMAC_TYPES_E_QSGMII (6)
+#define CGX_LMAC_TYPES_E_RGMII (5)
+#define CGX_LMAC_TYPES_E_RXAUI (2)
+#define CGX_LMAC_TYPES_E_SGMII (0)
+#define CGX_LMAC_TYPES_E_TENG_R (3)
+#define CGX_LMAC_TYPES_E_TWENTYFIVEG_R (7)
+#define CGX_LMAC_TYPES_E_USXGMII (0xa)
+#define CGX_LMAC_TYPES_E_XAUI (1)
+
+/**
+ * Enumeration cgx_opcode_e
+ *
+ * INTERNAL: CGX Error Opcode Enumeration Enumerates the error opcodes
+ * created by CGX and presented to NCSI/NIX.
+ */
+#define CGX_OPCODE_E_RE_FCS (7)
+#define CGX_OPCODE_E_RE_FCS_RCV (8)
+#define CGX_OPCODE_E_RE_JABBER (2)
+#define CGX_OPCODE_E_RE_NONE (0)
+#define CGX_OPCODE_E_RE_PARTIAL (1)
+#define CGX_OPCODE_E_RE_RX_CTL (0xb)
+#define CGX_OPCODE_E_RE_SKIP (0xc)
+#define CGX_OPCODE_E_RE_TERMINATE (9)
+
+/**
+ * Enumeration cgx_spu_br_train_cst_e
+ *
+ * INTERNAL: CGX Training Coefficient Status Enumeration 2-bit status
+ * for each coefficient as defined in IEEE 802.3, Table 72-5.
+ */
+#define CGX_SPU_BR_TRAIN_CST_E_MAXIMUM (3)
+#define CGX_SPU_BR_TRAIN_CST_E_MINIMUM (2)
+#define CGX_SPU_BR_TRAIN_CST_E_NOT_UPDATED (0)
+#define CGX_SPU_BR_TRAIN_CST_E_UPDATED (1)
+
+/**
+ * Enumeration cgx_spu_br_train_cup_e
+ *
+ * INTERNAL:CGX Training Coefficient Enumeration 2-bit command for each
+ * coefficient as defined in IEEE 802.3, Table 72-4.
+ */
+#define CGX_SPU_BR_TRAIN_CUP_E_DECREMENT (1)
+#define CGX_SPU_BR_TRAIN_CUP_E_HOLD (0)
+#define CGX_SPU_BR_TRAIN_CUP_E_INCREMENT (2)
+#define CGX_SPU_BR_TRAIN_CUP_E_RSV_CMD (3)
+
+/**
+ * Enumeration cgx_usxgmii_rate_e
+ *
+ * CGX USXGMII Rate Enumeration Enumerates the USXGMII sub-port type
+ * rate, CGX()_SPU()_CONTROL1[USXGMII_RATE]. Selecting a rate higher
+ * than the maximum allowed for a given port sub-type (specified by
+ * CGX()_SPU()_CONTROL1[USXGMII_TYPE]), e.g., selecting ::RATE_2HG (2.5
+ * Gbps) for CGX_USXGMII_TYPE_E::SXGMII_2G, will cause unpredictable
+ * behavior. USXGMII hardware-based autonegotiation may change this
+ * setting.
+ */
+#define CGX_USXGMII_RATE_E_RATE_100M (1)
+#define CGX_USXGMII_RATE_E_RATE_10G (5)
+#define CGX_USXGMII_RATE_E_RATE_10M (0)
+#define CGX_USXGMII_RATE_E_RATE_1G (2)
+#define CGX_USXGMII_RATE_E_RATE_20G (6)
+#define CGX_USXGMII_RATE_E_RATE_2HG (3)
+#define CGX_USXGMII_RATE_E_RATE_5G (4)
+#define CGX_USXGMII_RATE_E_RSV_RATE (7)
+
+/**
+ * Enumeration cgx_usxgmii_type_e
+ *
+ * CGX USXGMII Port Sub-Type Enumeration Enumerates the USXGMII sub-port
+ * type, CGX()_SPU()_CONTROL1[USXGMII_TYPE]. The description indicates
+ * the maximum rate and the maximum number of ports (LMACs) for each sub-
+ * type. The minimum rate for any port is 10M. The rate selection for
+ * each LMAC is made using CGX()_SPU()_CONTROL1[USXGMII_RATE] and the
+ * number of active ports/LMACs is implicitly determined by the value
+ * given to CGX()_CMR()_CONFIG[ENABLE] for each LMAC. Selecting a rate
+ * higher than the maximum allowed for a given port sub-type or enabling
+ * more LMACs than the maximum allowed for a given port sub-type will
+ * cause unpredictable behavior.
+ */
+#define CGX_USXGMII_TYPE_E_DXGMII_10G (3)
+#define CGX_USXGMII_TYPE_E_DXGMII_20G (5)
+#define CGX_USXGMII_TYPE_E_DXGMII_5G (4)
+#define CGX_USXGMII_TYPE_E_QXGMII_10G (7)
+#define CGX_USXGMII_TYPE_E_QXGMII_20G (6)
+#define CGX_USXGMII_TYPE_E_SXGMII_10G (0)
+#define CGX_USXGMII_TYPE_E_SXGMII_2G (2)
+#define CGX_USXGMII_TYPE_E_SXGMII_5G (1)
+
+/**
+ * Structure cgx_spu_br_lane_train_status_s
+ *
+ * INTERNAL:CGX Lane Training Status Structure This is the group of lane
+ * status bits for a single lane in the BASE-R PMD status register (MDIO
+ * address 1.151) as defined in IEEE 802.3ba-2010, Table 45-55.
+ */
+union cgx_spu_br_lane_train_status_s {
+ u32 u;
+ struct cgx_spu_br_lane_train_status_s_s {
+ u32 rx_trained : 1;
+ u32 frame_lock : 1;
+ u32 training : 1;
+ u32 training_failure : 1;
+ u32 reserved_4_31 : 28;
+ } s;
+ /* struct cgx_spu_br_lane_train_status_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_br_train_cup_s
+ *
+ * INTERNAL:CGX Lane Training Coefficient Structure This is the
+ * coefficient update field of the BASE-R link training packet as defined
+ * in IEEE 802.3, Table 72-4.
+ */
+union cgx_spu_br_train_cup_s {
+ u32 u;
+ struct cgx_spu_br_train_cup_s_s {
+ u32 pre_cup : 2;
+ u32 main_cup : 2;
+ u32 post_cup : 2;
+ u32 reserved_6_11 : 6;
+ u32 init : 1;
+ u32 preset : 1;
+ u32 reserved_14_31 : 18;
+ } s;
+ struct cgx_spu_br_train_cup_s_cn {
+ u32 pre_cup : 2;
+ u32 main_cup : 2;
+ u32 post_cup : 2;
+ u32 reserved_6_11 : 6;
+ u32 init : 1;
+ u32 preset : 1;
+ u32 reserved_14_15 : 2;
+ u32 reserved_16_31 : 16;
+ } cn;
+};
+
+/**
+ * Structure cgx_spu_br_train_rep_s
+ *
+ * INTERNAL:CGX Training Report Structure This is the status report
+ * field of the BASE-R link training packet as defined in IEEE 802.3,
+ * Table 72-5.
+ */
+union cgx_spu_br_train_rep_s {
+ u32 u;
+ struct cgx_spu_br_train_rep_s_s {
+ u32 pre_cst : 2;
+ u32 main_cst : 2;
+ u32 post_cst : 2;
+ u32 reserved_6_14 : 9;
+ u32 rx_ready : 1;
+ u32 reserved_16_31 : 16;
+ } s;
+ /* struct cgx_spu_br_train_rep_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_sds_cu_s
+ *
+ * INTERNAL: CGX Training Coeffiecient Structure This structure is
+ * similar to CGX_SPU_BR_TRAIN_CUP_S format, but with reserved fields
+ * removed and [RCVR_READY] field added.
+ */
+union cgx_spu_sds_cu_s {
+ u32 u;
+ struct cgx_spu_sds_cu_s_s {
+ u32 pre_cu : 2;
+ u32 main_cu : 2;
+ u32 post_cu : 2;
+ u32 initialize : 1;
+ u32 preset : 1;
+ u32 rcvr_ready : 1;
+ u32 reserved_9_31 : 23;
+ } s;
+ /* struct cgx_spu_sds_cu_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_sds_skew_status_s
+ *
+ * CGX Skew Status Structure Provides receive skew information detected
+ * for a physical SerDes lane when it is assigned to a multilane
+ * LMAC/LPCS. Contents are valid when RX deskew is done for the
+ * associated LMAC/LPCS.
+ */
+union cgx_spu_sds_skew_status_s {
+ u32 u;
+ struct cgx_spu_sds_skew_status_s_s {
+ u32 am_timestamp : 12;
+ u32 reserved_12_15 : 4;
+ u32 am_lane_id : 5;
+ u32 reserved_21_22 : 2;
+ u32 lane_skew : 7;
+ u32 reserved_30_31 : 2;
+ } s;
+ /* struct cgx_spu_sds_skew_status_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_sds_sr_s
+ *
+ * INTERNAL: CGX Lane Training Coefficient Structure Similar to
+ * CGX_SPU_BR_TRAIN_REP_S format, but with reserved and RX ready fields
+ * removed.
+ */
+union cgx_spu_sds_sr_s {
+ u32 u;
+ struct cgx_spu_sds_sr_s_s {
+ u32 pre_status : 2;
+ u32 main_status : 2;
+ u32 post_status : 2;
+ u32 reserved_6_31 : 26;
+ } s;
+ /* struct cgx_spu_sds_sr_s_s cn; */
+};
+
+/**
+ * Register (RSL) cgx#_active_pc
+ *
+ * CGX ACTIVE PC Register This register counts the conditional clocks for
+ * power management.
+ */
+union cgxx_active_pc {
+ u64 u;
+ struct cgxx_active_pc_s {
+ u64 cnt : 64;
+ } s;
+ /* struct cgxx_active_pc_s cn; */
+};
+
+static inline u64 CGXX_ACTIVE_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_ACTIVE_PC(void)
+{
+ return 0x2010;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_activity
+ *
+ * CGX CMR Activity Registers
+ */
+union cgxx_cmrx_activity {
+ u64 u;
+ struct cgxx_cmrx_activity_s {
+ u64 act_tx_lo : 1;
+ u64 act_tx_hi : 1;
+ u64 pause_tx : 1;
+ u64 act_rx_lo : 1;
+ u64 act_rx_hi : 1;
+ u64 pause_rx : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_cmrx_activity_s cn; */
+};
+
+static inline u64 CGXX_CMRX_ACTIVITY(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_ACTIVITY(u64 a)
+{
+ return 0x5f8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_config
+ *
+ * CGX CMR Configuration Registers Logical MAC/PCS configuration
+ * registers; one per LMAC. The maximum number of LMACs (and maximum LMAC
+ * ID) that can be enabled by these registers is limited by
+ * CGX()_CMR_RX_LMACS[LMACS] and CGX()_CMR_TX_LMACS[LMACS]. Internal:
+ * \<pre\> Example configurations: ------------------------------------
+ * --------------------------------------- Configuration
+ * LMACS Register [ENABLE] [LMAC_TYPE] ----------------
+ * -----------------------------------------------------------
+ * 1x50G+1x25G+1xSGMII 4 CGXn_CMR0_CONFIG 1 8
+ * CGXn_CMR1_CONFIG 0 --
+ * CGXn_CMR2_CONFIG 1 7
+ * CGXn_CMR3_CONFIG 1 0 ---------------------------------
+ * ------------------------------------------ USXGMII
+ * 1-4 CGXn_CMR0_CONFIG 1 a
+ * CGXn_CMR1_CONFIG 1 a
+ * CGXn_CMR2_CONFIG 1 a
+ * CGXn_CMR3_CONFIG 1 a ---------------------------------
+ * ------------------------------------------ 1x100GBASE-R4 1
+ * CGXn_CMR0_CONFIG 1 9
+ * CGXn_CMR1_CONFIG 0 --
+ * CGXn_CMR2_CONFIG 0 --
+ * CGXn_CMR3_CONFIG 0 -- --------------------------------
+ * ------------------------------------------- 2x50GBASE-R2
+ * 2 CGXn_CMR0_CONFIG 1 8
+ * CGXn_CMR1_CONFIG 1 8
+ * CGXn_CMR2_CONFIG 0 --
+ * CGXn_CMR3_CONFIG 0 -- --------------------------------
+ * ------------------------------------------- 4x25GBASE-R
+ * 4 CGXn_CMR0_CONFIG 1 7
+ * CGXn_CMR1_CONFIG 1 7
+ * CGXn_CMR2_CONFIG 1 7
+ * CGXn_CMR3_CONFIG 1 7 ---------------------------------
+ * ------------------------------------------ QSGMII 4
+ * CGXn_CMR0_CONFIG 1 6
+ * CGXn_CMR1_CONFIG 1 6
+ * CGXn_CMR2_CONFIG 1 6
+ * CGXn_CMR3_CONFIG 1 6 ---------------------------------
+ * ------------------------------------------ 1x40GBASE-R4 1
+ * CGXn_CMR0_CONFIG 1 4
+ * CGXn_CMR1_CONFIG 0 --
+ * CGXn_CMR2_CONFIG 0 --
+ * CGXn_CMR3_CONFIG 0 -- --------------------------------
+ * ------------------------------------------- 4x10GBASE-R
+ * 4 CGXn_CMR0_CONFIG 1 3
+ * CGXn_CMR1_CONFIG 1 3
+ * CGXn_CMR2_CONFIG 1 3
+ * CGXn_CMR3_CONFIG 1 3 ---------------------------------
+ * ------------------------------------------ 2xRXAUI 2
+ * CGXn_CMR0_CONFIG 1 2
+ * CGXn_CMR1_CONFIG 1 2
+ * CGXn_CMR2_CONFIG 0 --
+ * CGXn_CMR3_CONFIG 0 -- --------------------------------
+ * ------------------------------------------- 1x10GBASE-X/XAUI/DXAUI
+ * 1 CGXn_CMR0_CONFIG 1 1
+ * CGXn_CMR1_CONFIG 0 --
+ * CGXn_CMR2_CONFIG 0 --
+ * CGXn_CMR3_CONFIG 0 -- --------------------------------
+ * ------------------------------------------- 4xSGMII/1000BASE-X
+ * 4 CGXn_CMR0_CONFIG 1 0
+ * CGXn_CMR1_CONFIG 1 0
+ * CGXn_CMR2_CONFIG 1 0
+ * CGXn_CMR3_CONFIG 1 0 ---------------------------------
+ * ------------------------------------------ \</pre\>
+ */
+union cgxx_cmrx_config {
+ u64 u;
+ struct cgxx_cmrx_config_s {
+ u64 lane_to_sds : 8;
+ u64 reserved_8_39 : 32;
+ u64 lmac_type : 4;
+ u64 unused : 8;
+ u64 int_beat_gen : 1;
+ u64 data_pkt_tx_en : 1;
+ u64 data_pkt_rx_en : 1;
+ u64 enable : 1;
+ u64 x2p_select : 3;
+ u64 p2x_select : 3;
+ u64 reserved_62_63 : 2;
+ } s;
+ /* struct cgxx_cmrx_config_s cn; */
+};
+
+static inline u64 CGXX_CMRX_CONFIG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_CONFIG(u64 a)
+{
+ return 0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int
+ *
+ * CGX CMR Interrupt Register
+ */
+union cgxx_cmrx_int {
+ u64 u;
+ struct cgxx_cmrx_int_s {
+ u64 pause_drp : 1;
+ u64 overflw : 1;
+ u64 nic_nxc : 1;
+ u64 nix0_nxc : 1;
+ u64 nix1_nxc : 1;
+ u64 nix0_e_nxc : 1;
+ u64 nix1_e_nxc : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_cmrx_int_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT(u64 a)
+{
+ return 0x40 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int_ena_w1c
+ *
+ * CGX CMR Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_int_ena_w1c {
+ u64 u;
+ struct cgxx_cmrx_int_ena_w1c_s {
+ u64 pause_drp : 1;
+ u64 overflw : 1;
+ u64 nic_nxc : 1;
+ u64 nix0_nxc : 1;
+ u64 nix1_nxc : 1;
+ u64 nix0_e_nxc : 1;
+ u64 nix1_e_nxc : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_cmrx_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT_ENA_W1C(u64 a)
+{
+ return 0x50 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int_ena_w1s
+ *
+ * CGX CMR Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_int_ena_w1s {
+ u64 u;
+ struct cgxx_cmrx_int_ena_w1s_s {
+ u64 pause_drp : 1;
+ u64 overflw : 1;
+ u64 nic_nxc : 1;
+ u64 nix0_nxc : 1;
+ u64 nix1_nxc : 1;
+ u64 nix0_e_nxc : 1;
+ u64 nix1_e_nxc : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_cmrx_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT_ENA_W1S(u64 a)
+{
+ return 0x58 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int_w1s
+ *
+ * CGX CMR Interrupt Set Register This register sets interrupt bits.
+ */
+union cgxx_cmrx_int_w1s {
+ u64 u;
+ struct cgxx_cmrx_int_w1s_s {
+ u64 pause_drp : 1;
+ u64 overflw : 1;
+ u64 nic_nxc : 1;
+ u64 nix0_nxc : 1;
+ u64 nix1_nxc : 1;
+ u64 nix0_e_nxc : 1;
+ u64 nix1_e_nxc : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_cmrx_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT_W1S(u64 a)
+{
+ return 0x48 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_led_timing
+ *
+ * CGX MAC LED Activity Timing Registers
+ */
+union cgxx_cmrx_led_timing {
+ u64 u;
+ struct cgxx_cmrx_led_timing_s {
+ u64 extension : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct cgxx_cmrx_led_timing_s cn; */
+};
+
+static inline u64 CGXX_CMRX_LED_TIMING(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_LED_TIMING(u64 a)
+{
+ return 0x5f0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_prt_cbfc_ctl
+ *
+ * CGX CMR LMAC PFC Control Registers See CGX()_CMR()_RX_LOGL_XOFF[XOFF].
+ */
+union cgxx_cmrx_prt_cbfc_ctl {
+ u64 u;
+ struct cgxx_cmrx_prt_cbfc_ctl_s {
+ u64 reserved_0_15 : 16;
+ u64 phys_bp : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_cmrx_prt_cbfc_ctl_s cn; */
+};
+
+static inline u64 CGXX_CMRX_PRT_CBFC_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_PRT_CBFC_CTL(u64 a)
+{
+ return 0x608 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_drop
+ *
+ * CGX Receive Backpressure Drop Register
+ */
+union cgxx_cmrx_rx_bp_drop {
+ u64 u;
+ struct cgxx_cmrx_rx_bp_drop_s {
+ u64 mark : 7;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_cmrx_rx_bp_drop_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_DROP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_DROP(u64 a)
+{
+ return 0xd8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_off
+ *
+ * CGX Receive Backpressure Off Register
+ */
+union cgxx_cmrx_rx_bp_off {
+ u64 u;
+ struct cgxx_cmrx_rx_bp_off_s {
+ u64 mark : 7;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_cmrx_rx_bp_off_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_OFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_OFF(u64 a)
+{
+ return 0xe8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_on
+ *
+ * CGX Receive Backpressure On Register
+ */
+union cgxx_cmrx_rx_bp_on {
+ u64 u;
+ struct cgxx_cmrx_rx_bp_on_s {
+ u64 mark : 13;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct cgxx_cmrx_rx_bp_on_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_ON(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_ON(u64 a)
+{
+ return 0xe0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_status
+ *
+ * CGX CMR Receive Backpressure Status Registers
+ */
+union cgxx_cmrx_rx_bp_status {
+ u64 u;
+ struct cgxx_cmrx_rx_bp_status_s {
+ u64 bp : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmrx_rx_bp_status_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_STATUS(u64 a)
+{
+ return 0xf0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_dmac_ctl0
+ *
+ * CGX CMR Receive DMAC Address-Control0 Register DMAC CAM control
+ * register for use by X2P/NIX bound traffic. Received packets are only
+ * passed to X2P/NIX when the DMAC0 filter result is ACCEPT and STEERING0
+ * filter result is PASS. See also CGX()_CMR_RX_DMAC()_CAM0 and
+ * CGX()_CMR_RX_STEERING0(). Internal: "* ALGORITHM Here is some pseudo
+ * code that represents the address filter behavior. \<pre\>
+ * dmac_addr_filter(uint8 prt, uint48 dmac) { for (lmac=0, lmac\<4,
+ * lmac++) { if (is_bcst(dmac)) //
+ * broadcast accept return (CGX()_CMR(lmac)_RX_DMAC_CTL0[BCST_ACCEPT]
+ * ? ACCEPT : REJECT); if (is_mcst(dmac) &&
+ * CGX()_CMR(lmac)_RX_DMAC_CTL0[MCST_MODE] == 0) // multicast reject
+ * return REJECT; if (is_mcst(dmac) &&
+ * CGX()_CMR(lmac)_RX_DMAC_CTL0[MCST_MODE] == 1) // multicast accept
+ * return ACCEPT; else // DMAC CAM filter cam_hit = 0; for
+ * (i=0; i\<32; i++) { cam = CGX()_CMR_RX_DMAC(i)_CAM0; if
+ * (cam[EN] && cam[ID] == lmac && cam[ADR] == dmac) { cam_hit = 1;
+ * break; } } if (cam_hit) { return
+ * (CGX()_CMR(lmac)_RX_DMAC_CTL0[CAM_ACCEPT] ? ACCEPT : REJECT); else
+ * return (CGX()_CMR(lmac)_RX_DMAC_CTL0[CAM_ACCEPT] ? REJECT : ACCEPT);
+ * } } \</pre\>"
+ */
+union cgxx_cmrx_rx_dmac_ctl0 {
+ u64 u;
+ struct cgxx_cmrx_rx_dmac_ctl0_s {
+ u64 bcst_accept : 1;
+ u64 mcst_mode : 2;
+ u64 cam_accept : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_cmrx_rx_dmac_ctl0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_DMAC_CTL0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_DMAC_CTL0(u64 a)
+{
+ return 0x1f8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_dmac_ctl1
+ *
+ * CGX CMR Receive DMAC Address-Control1 Register DMAC CAM control
+ * register for use by NCSI bound traffic. Received packets are only
+ * passed to NCSI when the DMAC1 filter result is ACCEPT and STEERING1
+ * filter result is PASS. See also CGX()_CMR_RX_DMAC()_CAM1 and
+ * CGX()_CMR_RX_STEERING1(). For use with the LMAC associated with NCSI;
+ * see CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID]. Internal: ALGORITHM: See
+ * CGX()_CMR()_RX_DMAC_CTL0.
+ */
+union cgxx_cmrx_rx_dmac_ctl1 {
+ u64 u;
+ struct cgxx_cmrx_rx_dmac_ctl1_s {
+ u64 bcst_accept : 1;
+ u64 mcst_mode : 2;
+ u64 cam_accept : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_cmrx_rx_dmac_ctl1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_DMAC_CTL1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_DMAC_CTL1(u64 a)
+{
+ return 0x3f8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_fifo_len
+ *
+ * CGX CMR Receive Fifo Length Registers
+ */
+union cgxx_cmrx_rx_fifo_len {
+ u64 u;
+ struct cgxx_cmrx_rx_fifo_len_s {
+ u64 fifo_len : 14;
+ u64 busy : 1;
+ u64 fifo_len_e : 14;
+ u64 busy_e : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct cgxx_cmrx_rx_fifo_len_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_FIFO_LEN(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_FIFO_LEN(u64 a)
+{
+ return 0x108 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_id_map
+ *
+ * CGX CMR Receive ID Map Register These registers set the RX LMAC ID
+ * mapping for X2P/NIX.
+ */
+union cgxx_cmrx_rx_id_map {
+ u64 u;
+ struct cgxx_cmrx_rx_id_map_s {
+ u64 pknd : 6;
+ u64 unused : 2;
+ u64 rid : 7;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct cgxx_cmrx_rx_id_map_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_ID_MAP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_ID_MAP(u64 a)
+{
+ return 0x60 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_logl_xoff
+ *
+ * CGX CMR Receive Logical XOFF Registers
+ */
+union cgxx_cmrx_rx_logl_xoff {
+ u64 u;
+ struct cgxx_cmrx_rx_logl_xoff_s {
+ u64 xoff : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_cmrx_rx_logl_xoff_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_LOGL_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_LOGL_XOFF(u64 a)
+{
+ return 0xf8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_logl_xon
+ *
+ * CGX CMR Receive Logical XON Registers
+ */
+union cgxx_cmrx_rx_logl_xon {
+ u64 u;
+ struct cgxx_cmrx_rx_logl_xon_s {
+ u64 xon : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_cmrx_rx_logl_xon_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_LOGL_XON(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_LOGL_XON(u64 a)
+{
+ return 0x100 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat0
+ *
+ * CGX RX Preemption Status Register 0
+ */
+union cgxx_cmrx_rx_merge_stat0 {
+ u64 u;
+ struct cgxx_cmrx_rx_merge_stat0_s {
+ u64 fa_err_cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_merge_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT0(u64 a)
+{
+ return 0x138 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat1
+ *
+ * CGX RX Preemption Status Register 1
+ */
+union cgxx_cmrx_rx_merge_stat1 {
+ u64 u;
+ struct cgxx_cmrx_rx_merge_stat1_s {
+ u64 fs_err_cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_merge_stat1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT1(u64 a)
+{
+ return 0x140 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat2
+ *
+ * CGX RX Preemption Status Register 2
+ */
+union cgxx_cmrx_rx_merge_stat2 {
+ u64 u;
+ struct cgxx_cmrx_rx_merge_stat2_s {
+ u64 fa_ok_cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_merge_stat2_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT2(u64 a)
+{
+ return 0x148 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat3
+ *
+ * CGX RX Preemption Status Register 3
+ */
+union cgxx_cmrx_rx_merge_stat3 {
+ u64 u;
+ struct cgxx_cmrx_rx_merge_stat3_s {
+ u64 ff_cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_merge_stat3_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT3(u64 a)
+{
+ return 0x150 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat4
+ *
+ * CGX RX Preemption Status Register 4
+ */
+union cgxx_cmrx_rx_merge_stat4 {
+ u64 u;
+ struct cgxx_cmrx_rx_merge_stat4_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_merge_stat4_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT4(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT4(u64 a)
+{
+ return 0x158 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_pause_drop_time
+ *
+ * CGX CMR Receive Pause Drop-Time Register
+ */
+union cgxx_cmrx_rx_pause_drop_time {
+ u64 u;
+ struct cgxx_cmrx_rx_pause_drop_time_s {
+ u64 pause_time : 16;
+ u64 pause_time_e : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_cmrx_rx_pause_drop_time_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_PAUSE_DROP_TIME(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_PAUSE_DROP_TIME(u64 a)
+{
+ return 0x68 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat0
+ *
+ * CGX Receive Status Register 0 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are not recognized as PAUSE
+ * packets. * are not dropped due FIFO full status. * are not dropped due
+ * DMAC0 or STEERING0 filtering. Internal: "This pseudo code represents
+ * the RX STAT0 through STAT8 accounting: \<pre\> If (errored) incr
+ * RX_STAT8 else if (ctrl packet, i.e. Pause/PFC) incr RX_STAT2,3 else
+ * if (fifo full drop) incr RX_STAT6,7 else if (DMAC0/VLAN0 filter
+ * drop) incr RX_STAT4,5 if not a filter+decision else incr
+ * RX_STAT0,1 end \</pre\>"
+ */
+union cgxx_cmrx_rx_stat0 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat0_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT0(u64 a)
+{
+ return 0x70 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat1
+ *
+ * CGX Receive Status Register 1 These registers provide a count of
+ * octets of received packets.
+ */
+union cgxx_cmrx_rx_stat1 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat1_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT1(u64 a)
+{
+ return 0x78 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat2
+ *
+ * CGX Receive Status Register 2 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are recognized as PAUSE
+ * packets. Pause packets can be optionally dropped or forwarded based
+ * on
+ * CGX()_SMU()_RX_FRM_CTL[CTL_DRP]/CGX()_GMP_GMI_RX()_FRM_CTL[CTL_DRP].
+ * This count increments regardless of whether the packet is dropped.
+ */
+union cgxx_cmrx_rx_stat2 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat2_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat2_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT2(u64 a)
+{
+ return 0x80 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat3
+ *
+ * CGX Receive Status Register 3 These registers provide a count of
+ * octets of received PAUSE and control packets.
+ */
+union cgxx_cmrx_rx_stat3 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat3_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat3_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT3(u64 a)
+{
+ return 0x88 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat4
+ *
+ * CGX Receive Status Register 4 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are not recognized as PAUSE
+ * packets. * are not dropped due FIFO full status. * are dropped due
+ * DMAC0 or STEERING0 filtering. 16B packets or smaller (20B in case of
+ * FCS strip) as the result of truncation or other means are not dropped
+ * by CGX (unless filter and decision is also asserted) and will never
+ * appear in this count. Should the MAC signal to the CMR that the packet
+ * be filtered upon decision before the end of packet, then STAT4 and
+ * STAT5 will not be updated.
+ */
+union cgxx_cmrx_rx_stat4 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat4_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat4_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT4(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT4(u64 a)
+{
+ return 0x90 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat5
+ *
+ * CGX Receive Status Register 5 These registers provide a count of
+ * octets of filtered DMAC0 or VLAN STEERING0 packets.
+ */
+union cgxx_cmrx_rx_stat5 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat5_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat5_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT5(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT5(u64 a)
+{
+ return 0x98 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat6
+ *
+ * CGX Receive Status Register 6 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are not recognized as PAUSE
+ * packets. * are dropped due FIFO full status. They do not count any
+ * packet that is truncated at the point of overflow and sent on to the
+ * NIX. The truncated packet will be marked with error and increment
+ * STAT8. These registers count all entire packets dropped by the FIFO
+ * for a given LMAC.
+ */
+union cgxx_cmrx_rx_stat6 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat6_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat6_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT6(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT6(u64 a)
+{
+ return 0xa0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat7
+ *
+ * CGX Receive Status Register 7 These registers provide a count of
+ * octets of received packets that were dropped due to a full receive
+ * FIFO.
+ */
+union cgxx_cmrx_rx_stat7 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat7_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat7_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT7(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT7(u64 a)
+{
+ return 0xa8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat8
+ *
+ * CGX Receive Status Register 8 These registers provide a count of
+ * received packets that meet the following conditions: * are recognized
+ * as ERROR packets(any OPCODE).
+ */
+union cgxx_cmrx_rx_stat8 {
+ u64 u;
+ struct cgxx_cmrx_rx_stat8_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat8_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT8(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT8(u64 a)
+{
+ return 0xb0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat_pri#_xoff
+ *
+ * CGX CMR RX XON to XOFF transition Registers
+ */
+union cgxx_cmrx_rx_stat_prix_xoff {
+ u64 u;
+ struct cgxx_cmrx_rx_stat_prix_xoff_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_rx_stat_prix_xoff_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT_PRIX_XOFF(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT_PRIX_XOFF(u64 a, u64 b)
+{
+ return 0x7c0 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_scratch#
+ *
+ * CGX CMR Scratch Registers
+ */
+union cgxx_cmrx_scratchx {
+ u64 u;
+ struct cgxx_cmrx_scratchx_s {
+ u64 scratch : 64;
+ } s;
+ /* struct cgxx_cmrx_scratchx_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SCRATCHX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SCRATCHX(u64 a, u64 b)
+{
+ return 0x1050 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int
+ *
+ * CGX CMR Interrupt Register
+ */
+union cgxx_cmrx_sw_int {
+ u64 u;
+ struct cgxx_cmrx_sw_int_s {
+ u64 sw_set : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmrx_sw_int_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT(u64 a)
+{
+ return 0x180 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int_ena_w1c
+ *
+ * CGX CMR Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_sw_int_ena_w1c {
+ u64 u;
+ struct cgxx_cmrx_sw_int_ena_w1c_s {
+ u64 sw_set : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmrx_sw_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1C(u64 a)
+{
+ return 0x190 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int_ena_w1s
+ *
+ * CGX CMR Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_sw_int_ena_w1s {
+ u64 u;
+ struct cgxx_cmrx_sw_int_ena_w1s_s {
+ u64 sw_set : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmrx_sw_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1S(u64 a)
+{
+ return 0x198 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int_w1s
+ *
+ * CGX CMR Interrupt Set Register This register sets interrupt bits.
+ */
+union cgxx_cmrx_sw_int_w1s {
+ u64 u;
+ struct cgxx_cmrx_sw_int_w1s_s {
+ u64 sw_set : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmrx_sw_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT_W1S(u64 a)
+{
+ return 0x188 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_channel
+ *
+ * CGX CMR Transmit-Channels Registers
+ */
+union cgxx_cmrx_tx_channel {
+ u64 u;
+ struct cgxx_cmrx_tx_channel_s {
+ u64 msk : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_cmrx_tx_channel_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_CHANNEL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_CHANNEL(u64 a)
+{
+ return 0x600 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_fifo_len
+ *
+ * CGX CMR Transmit Fifo Length Registers
+ */
+union cgxx_cmrx_tx_fifo_len {
+ u64 u;
+ struct cgxx_cmrx_tx_fifo_len_s {
+ u64 fifo_len : 14;
+ u64 lmac_idle : 1;
+ u64 fifo_e_len : 14;
+ u64 lmac_e_idle : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct cgxx_cmrx_tx_fifo_len_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_FIFO_LEN(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_FIFO_LEN(u64 a)
+{
+ return 0x618 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_hg2_status
+ *
+ * CGX CMR Transmit HiGig2 Status Registers
+ */
+union cgxx_cmrx_tx_hg2_status {
+ u64 u;
+ struct cgxx_cmrx_tx_hg2_status_s {
+ u64 lgtim2go : 16;
+ u64 xof : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_cmrx_tx_hg2_status_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_HG2_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_HG2_STATUS(u64 a)
+{
+ return 0x610 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_merge_stat0
+ *
+ * CGX TX Preemption Status Register 0
+ */
+union cgxx_cmrx_tx_merge_stat0 {
+ u64 u;
+ struct cgxx_cmrx_tx_merge_stat0_s {
+ u64 ff_cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_merge_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_MERGE_STAT0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_MERGE_STAT0(u64 a)
+{
+ return 0x160 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_ovr_bp
+ *
+ * CGX CMR Transmit-Channels Backpressure Override Registers
+ */
+union cgxx_cmrx_tx_ovr_bp {
+ u64 u;
+ struct cgxx_cmrx_tx_ovr_bp_s {
+ u64 tx_chan_bp : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_cmrx_tx_ovr_bp_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_OVR_BP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_OVR_BP(u64 a)
+{
+ return 0x620 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat0
+ *
+ * CGX CMR Transmit Statistics Registers 0
+ */
+union cgxx_cmrx_tx_stat0 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat0_s {
+ u64 xscol : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT0(u64 a)
+{
+ return 0x700 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat1
+ *
+ * CGX CMR Transmit Statistics Registers 1
+ */
+union cgxx_cmrx_tx_stat1 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat1_s {
+ u64 xsdef : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT1(u64 a)
+{
+ return 0x708 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat10
+ *
+ * CGX CMR Transmit Statistics Registers 10
+ */
+union cgxx_cmrx_tx_stat10 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat10_s {
+ u64 hist4 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat10_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT10(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT10(u64 a)
+{
+ return 0x750 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat11
+ *
+ * CGX CMR Transmit Statistics Registers 11
+ */
+union cgxx_cmrx_tx_stat11 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat11_s {
+ u64 hist5 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat11_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT11(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT11(u64 a)
+{
+ return 0x758 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat12
+ *
+ * CGX CMR Transmit Statistics Registers 12
+ */
+union cgxx_cmrx_tx_stat12 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat12_s {
+ u64 hist6 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat12_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT12(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT12(u64 a)
+{
+ return 0x760 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat13
+ *
+ * CGX CMR Transmit Statistics Registers 13
+ */
+union cgxx_cmrx_tx_stat13 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat13_s {
+ u64 hist7 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat13_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT13(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT13(u64 a)
+{
+ return 0x768 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat14
+ *
+ * CGX CMR Transmit Statistics Registers 14
+ */
+union cgxx_cmrx_tx_stat14 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat14_s {
+ u64 bcst : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat14_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT14(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT14(u64 a)
+{
+ return 0x770 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat15
+ *
+ * CGX CMR Transmit Statistics Registers 15
+ */
+union cgxx_cmrx_tx_stat15 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat15_s {
+ u64 mcst : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat15_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT15(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT15(u64 a)
+{
+ return 0x778 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat16
+ *
+ * CGX CMR Transmit Statistics Registers 16
+ */
+union cgxx_cmrx_tx_stat16 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat16_s {
+ u64 undflw : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat16_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT16(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT16(u64 a)
+{
+ return 0x780 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat17
+ *
+ * CGX CMR Transmit Statistics Registers 17
+ */
+union cgxx_cmrx_tx_stat17 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat17_s {
+ u64 ctl : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat17_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT17(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT17(u64 a)
+{
+ return 0x788 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat2
+ *
+ * CGX CMR Transmit Statistics Registers 2
+ */
+union cgxx_cmrx_tx_stat2 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat2_s {
+ u64 mcol : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat2_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT2(u64 a)
+{
+ return 0x710 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat3
+ *
+ * CGX CMR Transmit Statistics Registers 3
+ */
+union cgxx_cmrx_tx_stat3 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat3_s {
+ u64 scol : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat3_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT3(u64 a)
+{
+ return 0x718 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat4
+ *
+ * CGX CMR Transmit Statistics Registers 4
+ */
+union cgxx_cmrx_tx_stat4 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat4_s {
+ u64 octs : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat4_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT4(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT4(u64 a)
+{
+ return 0x720 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat5
+ *
+ * CGX CMR Transmit Statistics Registers 5
+ */
+union cgxx_cmrx_tx_stat5 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat5_s {
+ u64 pkts : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat5_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT5(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT5(u64 a)
+{
+ return 0x728 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat6
+ *
+ * CGX CMR Transmit Statistics Registers 6
+ */
+union cgxx_cmrx_tx_stat6 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat6_s {
+ u64 hist0 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat6_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT6(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT6(u64 a)
+{
+ return 0x730 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat7
+ *
+ * CGX CMR Transmit Statistics Registers 7
+ */
+union cgxx_cmrx_tx_stat7 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat7_s {
+ u64 hist1 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat7_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT7(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT7(u64 a)
+{
+ return 0x738 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat8
+ *
+ * CGX CMR Transmit Statistics Registers 8
+ */
+union cgxx_cmrx_tx_stat8 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat8_s {
+ u64 hist2 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat8_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT8(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT8(u64 a)
+{
+ return 0x740 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat9
+ *
+ * CGX CMR Transmit Statistics Registers 9
+ */
+union cgxx_cmrx_tx_stat9 {
+ u64 u;
+ struct cgxx_cmrx_tx_stat9_s {
+ u64 hist3 : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat9_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT9(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT9(u64 a)
+{
+ return 0x748 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat_pri#_xoff
+ *
+ * CGX CMR TX XON to XOFF transition Registers
+ */
+union cgxx_cmrx_tx_stat_prix_xoff {
+ u64 u;
+ struct cgxx_cmrx_tx_stat_prix_xoff_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmrx_tx_stat_prix_xoff_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT_PRIX_XOFF(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT_PRIX_XOFF(u64 a, u64 b)
+{
+ return 0x800 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_bad
+ *
+ * CGX CMR Bad Registers
+ */
+union cgxx_cmr_bad {
+ u64 u;
+ struct cgxx_cmr_bad_s {
+ u64 rxb_nxl : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmr_bad_s cn; */
+};
+
+static inline u64 CGXX_CMR_BAD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_BAD(void)
+{
+ return 0x1020;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_chan_msk_and
+ *
+ * CGX CMR Backpressure Channel Mask AND Registers
+ */
+union cgxx_cmr_chan_msk_and {
+ u64 u;
+ struct cgxx_cmr_chan_msk_and_s {
+ u64 msk_and : 64;
+ } s;
+ /* struct cgxx_cmr_chan_msk_and_s cn; */
+};
+
+static inline u64 CGXX_CMR_CHAN_MSK_AND(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_CHAN_MSK_AND(void)
+{
+ return 0x110;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_chan_msk_or
+ *
+ * CGX Backpressure Channel Mask OR Registers
+ */
+union cgxx_cmr_chan_msk_or {
+ u64 u;
+ struct cgxx_cmr_chan_msk_or_s {
+ u64 msk_or : 64;
+ } s;
+ /* struct cgxx_cmr_chan_msk_or_s cn; */
+};
+
+static inline u64 CGXX_CMR_CHAN_MSK_OR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_CHAN_MSK_OR(void)
+{
+ return 0x118;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_eco
+ *
+ * INTERNAL: CGX ECO Registers
+ */
+union cgxx_cmr_eco {
+ u64 u;
+ struct cgxx_cmr_eco_s {
+ u64 eco_rw : 32;
+ u64 eco_ro : 32;
+ } s;
+ /* struct cgxx_cmr_eco_s cn; */
+};
+
+static inline u64 CGXX_CMR_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_ECO(void)
+{
+ return 0x1028;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_global_config
+ *
+ * CGX CMR Global Configuration Register These registers configure the
+ * global CMR, PCS, and MAC.
+ */
+union cgxx_cmr_global_config {
+ u64 u;
+ struct cgxx_cmr_global_config_s {
+ u64 pmux_sds_sel : 1;
+ u64 cgx_clk_enable : 1;
+ u64 cmr_x2p_reset : 3;
+ u64 interleave_mode : 1;
+ u64 fcs_strip : 1;
+ u64 ncsi_lmac_id : 2;
+ u64 cmr_ncsi_drop : 1;
+ u64 cmr_ncsi_reset : 1;
+ u64 cmr_ncsi_tag_cnt : 13;
+ u64 cmr_clken_ovrd : 1;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct cgxx_cmr_global_config_s cn; */
+};
+
+static inline u64 CGXX_CMR_GLOBAL_CONFIG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_GLOBAL_CONFIG(void)
+{
+ return 8;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int
+ *
+ * CGX CMR Memory Interrupt Register
+ */
+union cgxx_cmr_mem_int {
+ u64 u;
+ struct cgxx_cmr_mem_int_s {
+ u64 gmp_in_overfl : 1;
+ u64 smu_in_overfl : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_cmr_mem_int_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT(void)
+{
+ return 0x10;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int_ena_w1c
+ *
+ * CGX CMR Memory Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union cgxx_cmr_mem_int_ena_w1c {
+ u64 u;
+ struct cgxx_cmr_mem_int_ena_w1c_s {
+ u64 gmp_in_overfl : 1;
+ u64 smu_in_overfl : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_cmr_mem_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1C(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int_ena_w1s
+ *
+ * CGX CMR Memory Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union cgxx_cmr_mem_int_ena_w1s {
+ u64 u;
+ struct cgxx_cmr_mem_int_ena_w1s_s {
+ u64 gmp_in_overfl : 1;
+ u64 smu_in_overfl : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_cmr_mem_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1S(void)
+{
+ return 0x28;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int_w1s
+ *
+ * CGX CMR Memory Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union cgxx_cmr_mem_int_w1s {
+ u64 u;
+ struct cgxx_cmr_mem_int_w1s_s {
+ u64 gmp_in_overfl : 1;
+ u64 smu_in_overfl : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_cmr_mem_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT_W1S(void)
+{
+ return 0x18;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_nic_nxc_adr
+ *
+ * CGX CMR NIC NXC Exception Registers
+ */
+union cgxx_cmr_nic_nxc_adr {
+ u64 u;
+ struct cgxx_cmr_nic_nxc_adr_s {
+ u64 channel : 12;
+ u64 lmac_id : 4;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_cmr_nic_nxc_adr_s cn; */
+};
+
+static inline u64 CGXX_CMR_NIC_NXC_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_NIC_NXC_ADR(void)
+{
+ return 0x1030;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_nix0_nxc_adr
+ *
+ * CGX CMR NIX0 NXC Exception Registers
+ */
+union cgxx_cmr_nix0_nxc_adr {
+ u64 u;
+ struct cgxx_cmr_nix0_nxc_adr_s {
+ u64 channel : 12;
+ u64 lmac_id : 4;
+ u64 channel_e : 12;
+ u64 lmac_e_id : 4;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_cmr_nix0_nxc_adr_s cn; */
+};
+
+static inline u64 CGXX_CMR_NIX0_NXC_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_NIX0_NXC_ADR(void)
+{
+ return 0x1038;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_nix1_nxc_adr
+ *
+ * CGX CMR NIX1 NXC Exception Registers
+ */
+union cgxx_cmr_nix1_nxc_adr {
+ u64 u;
+ struct cgxx_cmr_nix1_nxc_adr_s {
+ u64 channel : 12;
+ u64 lmac_id : 4;
+ u64 channel_e : 12;
+ u64 lmac_e_id : 4;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_cmr_nix1_nxc_adr_s cn; */
+};
+
+static inline u64 CGXX_CMR_NIX1_NXC_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_NIX1_NXC_ADR(void)
+{
+ return 0x1040;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_p2x#_count
+ *
+ * CGX P2X Activity Register
+ */
+union cgxx_cmr_p2xx_count {
+ u64 u;
+ struct cgxx_cmr_p2xx_count_s {
+ u64 p2x_cnt : 64;
+ } s;
+ /* struct cgxx_cmr_p2xx_count_s cn; */
+};
+
+static inline u64 CGXX_CMR_P2XX_COUNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_P2XX_COUNT(u64 a)
+{
+ return 0x168 + 0x1000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_dmac#_cam0
+ *
+ * CGX CMR Receive CAM Registers These registers provide access to the 32
+ * DMAC CAM0 entries in CGX, for use by X2P/NIX bound traffic.
+ */
+union cgxx_cmr_rx_dmacx_cam0 {
+ u64 u;
+ struct cgxx_cmr_rx_dmacx_cam0_s {
+ u64 adr : 48;
+ u64 en : 1;
+ u64 id : 2;
+ u64 reserved_51_63 : 13;
+ } s;
+ /* struct cgxx_cmr_rx_dmacx_cam0_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_DMACX_CAM0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_DMACX_CAM0(u64 a)
+{
+ return 0x200 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_dmac#_cam1
+ *
+ * CGX CMR Receive CAM Registers These registers provide access to the 32
+ * DMAC CAM entries in CGX for use by NCSI bound traffic. See
+ * CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID] and CGX()_CMR_RX_STEERING1()
+ * registers.
+ */
+union cgxx_cmr_rx_dmacx_cam1 {
+ u64 u;
+ struct cgxx_cmr_rx_dmacx_cam1_s {
+ u64 adr : 48;
+ u64 en : 1;
+ u64 id : 2;
+ u64 reserved_51_63 : 13;
+ } s;
+ /* struct cgxx_cmr_rx_dmacx_cam1_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_DMACX_CAM1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_DMACX_CAM1(u64 a)
+{
+ return 0x400 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_lmacs
+ *
+ * CGX CMR Receive Logical MACs Registers
+ */
+union cgxx_cmr_rx_lmacs {
+ u64 u;
+ struct cgxx_cmr_rx_lmacs_s {
+ u64 lmacs : 3;
+ u64 reserved_3_63 : 61;
+ } s;
+ /* struct cgxx_cmr_rx_lmacs_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_LMACS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_LMACS(void)
+{
+ return 0x128;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_ovr_bp
+ *
+ * CGX CMR Receive-Ports Backpressure Override Registers Per-LMAC
+ * backpressure override register. For SMU, CGX()_CMR_RX_OVR_BP[EN]\<0\>
+ * must be set to one and CGX()_CMR_RX_OVR_BP[BP]\<0\> must be cleared to
+ * zero (to forcibly disable hardware-automatic 802.3 PAUSE packet
+ * generation) with the HiGig2 Protocol when
+ * CGX()_SMU()_HG2_CONTROL[HG2TX_EN]=0. (The HiGig2 protocol is indicated
+ * by CGX()_SMU()_TX_CTL[HG_EN]=1 and CGX()_SMU()_RX_UDD_SKP[LEN]=16).
+ * Hardware can only auto-generate backpressure through HiGig2 messages
+ * (optionally, when CGX()_SMU()_HG2_CONTROL[HG2TX_EN]=1) with the HiGig2
+ * protocol.
+ */
+union cgxx_cmr_rx_ovr_bp {
+ u64 u;
+ struct cgxx_cmr_rx_ovr_bp_s {
+ u64 ign_fifo_bp : 4;
+ u64 bp : 4;
+ u64 en : 4;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct cgxx_cmr_rx_ovr_bp_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_OVR_BP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_OVR_BP(void)
+{
+ return 0x130;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat10
+ *
+ * CGX Receive Status Register 10 These registers provide a count of
+ * octets of filtered DMAC1 or VLAN STEERING1 packets.
+ */
+union cgxx_cmr_rx_stat10 {
+ u64 u;
+ struct cgxx_cmr_rx_stat10_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmr_rx_stat10_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT10(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT10(void)
+{
+ return 0xc0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat11
+ *
+ * CGX Receive Status Register 11 This registers provides a count of
+ * packets dropped at the NCSI interface. This includes drops due to
+ * CGX()_CMR_GLOBAL_CONFIG[CMR_NCSI_DROP] or NCSI FIFO full. The count of
+ * dropped NCSI packets is not accounted for in any other stats
+ * registers.
+ */
+union cgxx_cmr_rx_stat11 {
+ u64 u;
+ struct cgxx_cmr_rx_stat11_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmr_rx_stat11_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT11(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT11(void)
+{
+ return 0xc8;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat12
+ *
+ * CGX Receive Status Register 12 This register provide a count of octets
+ * of dropped at the NCSI interface.
+ */
+union cgxx_cmr_rx_stat12 {
+ u64 u;
+ struct cgxx_cmr_rx_stat12_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmr_rx_stat12_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT12(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT12(void)
+{
+ return 0xd0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat9
+ *
+ * CGX Receive Status Register 9 These registers provide a count of all
+ * received packets that were dropped by the DMAC1 or VLAN STEERING1
+ * filter. Packets that are dropped by the DMAC1 or VLAN STEERING1
+ * filters are counted here regardless of whether they were ERR packets,
+ * but does not include those reported in CGX()_CMR()_RX_STAT6. 16B
+ * packets or smaller (20B in case of FCS strip) as the result of
+ * truncation or other means are not dropped by CGX (unless filter and
+ * decision is also asserted) and will never appear in this count. Should
+ * the MAC signal to the CMR that the packet be filtered upon decision
+ * before the end of packet, then STAT9 and STAT10 will not be updated.
+ */
+union cgxx_cmr_rx_stat9 {
+ u64 u;
+ struct cgxx_cmr_rx_stat9_s {
+ u64 cnt : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_cmr_rx_stat9_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT9(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT9(void)
+{
+ return 0xb8;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering0#
+ *
+ * CGX CMR Receive Steering0 Registers These registers, along with
+ * CGX()_CMR_RX_STEERING_VETYPE0(), provide eight filters for identifying
+ * and steering receive traffic to X2P/NIX. Received packets are only
+ * passed to X2P/NIX when the DMAC0 filter result is ACCEPT and STEERING0
+ * filter result is PASS. See also CGX()_CMR()_RX_DMAC_CTL0. Internal:
+ * "* ALGORITHM \<pre\> rx_steering(uint48 pkt_dmac, uint16 pkt_etype,
+ * uint16 pkt_vlan_id) { for (int i = 0; i \< 8; i++) { steer =
+ * CGX()_CMR_RX_STEERING0(i); vetype =
+ * CGX()_CMR_RX_STEERING_VETYPE0(i); if (steer[MCST_EN] ||
+ * steer[DMAC_EN] || vetype[VLAN_EN] || vetype[VLAN_TAG_EN]) {
+ * // Filter is enabled. if ( (!steer[MCST_EN] ||
+ * is_mcst(pkt_dmac)) && (!steer[DMAC_EN] || pkt_dmac ==
+ * steer[DMAC]) && (!vetype[VLAN_EN] || pkt_vlan_id ==
+ * vetype[VLAN_ID]) && (!vetype[VLAN_TAG_EN] || pkt_etype ==
+ * vetype[VLAN_ETYPE]) ) { // Filter match (all
+ * enabled matching criteria are met). return steer[PASS];
+ * } } } return CGX()_CMR_RX_STEERING_DEFAULT0[PASS]; // No
+ * match } \</pre\>"
+ */
+union cgxx_cmr_rx_steering0x {
+ u64 u;
+ struct cgxx_cmr_rx_steering0x_s {
+ u64 dmac : 48;
+ u64 dmac_en : 1;
+ u64 mcst_en : 1;
+ u64 pass : 1;
+ u64 reserved_51_63 : 13;
+ } s;
+ /* struct cgxx_cmr_rx_steering0x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING0X(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING0X(u64 a)
+{
+ return 0x300 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering1#
+ *
+ * CGX CMR Receive Steering1 Registers These registers, along with
+ * CGX()_CMR_RX_STEERING_VETYPE1(), provide eight filters for identifying
+ * and steering NCSI receive traffic. Received packets are only passed to
+ * NCSI when the DMAC1 filter result is ACCEPT and STEERING1 filter
+ * result is PASS. See also CGX()_CMR_RX_DMAC()_CAM1 and
+ * CGX()_CMR_RX_STEERING1(). For use with the LMAC associated with NCSI.
+ * See CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID]. Internal: ALGORITHM: See
+ * CGX()_CMR_RX_STEERING0().
+ */
+union cgxx_cmr_rx_steering1x {
+ u64 u;
+ struct cgxx_cmr_rx_steering1x_s {
+ u64 dmac : 48;
+ u64 dmac_en : 1;
+ u64 mcst_en : 1;
+ u64 pass : 1;
+ u64 reserved_51_63 : 13;
+ } s;
+ /* struct cgxx_cmr_rx_steering1x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING1X(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING1X(u64 a)
+{
+ return 0x500 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_default0
+ *
+ * CGX CMR Receive Steering Default0 Destination Register For determining
+ * destination of traffic that does not meet matching algorithm described
+ * in registers CGX()_CMR_RX_STEERING0() and
+ * CGX()_CMR_RX_STEERING_VETYPE0(). All 16B packets or smaller (20B in
+ * case of FCS strip) as the result of truncation will steer to default
+ * destination
+ */
+union cgxx_cmr_rx_steering_default0 {
+ u64 u;
+ struct cgxx_cmr_rx_steering_default0_s {
+ u64 pass : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmr_rx_steering_default0_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT0(void)
+{
+ return 0x3f0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_default1
+ *
+ * CGX CMR Receive Steering Default1 Destination Register For use with
+ * the lmac_id associated with NCSI. See
+ * CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID]. For determining destination of
+ * traffic that does not meet matching algorithm described in registers
+ * CGX()_CMR_RX_STEERING1() and CGX()_CMR_RX_STEERING_VETYPE1(). All 16B
+ * packets or smaller (20B in case of FCS strip) as the result of
+ * truncation will steer to default destination
+ */
+union cgxx_cmr_rx_steering_default1 {
+ u64 u;
+ struct cgxx_cmr_rx_steering_default1_s {
+ u64 pass : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_cmr_rx_steering_default1_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT1(void)
+{
+ return 0x5e0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_vetype0#
+ *
+ * CGX CMR Receive VLAN Ethertype1 Register These registers, along with
+ * CGX()_CMR_RX_STEERING0(), provide eight filters for identifying and
+ * steering X2P/NIX receive traffic.
+ */
+union cgxx_cmr_rx_steering_vetype0x {
+ u64 u;
+ struct cgxx_cmr_rx_steering_vetype0x_s {
+ u64 vlan_etype : 16;
+ u64 vlan_tag_en : 1;
+ u64 vlan_id : 12;
+ u64 vlan_en : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct cgxx_cmr_rx_steering_vetype0x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE0X(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE0X(u64 a)
+{
+ return 0x380 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_vetype1#
+ *
+ * CGX CMR Receive VLAN Ethertype1 Register For use with the lmac_id
+ * associated with NCSI. See CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID]. These
+ * registers, along with CGX()_CMR_RX_STEERING1(), provide eight filters
+ * for identifying and steering NCSI receive traffic.
+ */
+union cgxx_cmr_rx_steering_vetype1x {
+ u64 u;
+ struct cgxx_cmr_rx_steering_vetype1x_s {
+ u64 vlan_etype : 16;
+ u64 vlan_tag_en : 1;
+ u64 vlan_id : 12;
+ u64 vlan_en : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct cgxx_cmr_rx_steering_vetype1x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE1X(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE1X(u64 a)
+{
+ return 0x580 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_tx_lmacs
+ *
+ * CGX CMR Transmit Logical MACs Registers This register sets the number
+ * of LMACs allowed on the TX interface. The value is important for
+ * defining the partitioning of the transmit FIFO.
+ */
+union cgxx_cmr_tx_lmacs {
+ u64 u;
+ struct cgxx_cmr_tx_lmacs_s {
+ u64 lmacs : 3;
+ u64 reserved_3_63 : 61;
+ } s;
+ /* struct cgxx_cmr_tx_lmacs_s cn; */
+};
+
+static inline u64 CGXX_CMR_TX_LMACS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_TX_LMACS(void)
+{
+ return 0x1000;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_x2p#_count
+ *
+ * CGX X2P Activity Register
+ */
+union cgxx_cmr_x2px_count {
+ u64 u;
+ struct cgxx_cmr_x2px_count_s {
+ u64 x2p_cnt : 64;
+ } s;
+ /* struct cgxx_cmr_x2px_count_s cn; */
+};
+
+static inline u64 CGXX_CMR_X2PX_COUNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_X2PX_COUNT(u64 a)
+{
+ return 0x170 + 0x1000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_const
+ *
+ * CGX CONST Registers This register contains constants for software
+ * discovery.
+ */
+union cgxx_const {
+ u64 u;
+ struct cgxx_const_s {
+ u64 tx_fifosz : 24;
+ u64 lmacs : 8;
+ u64 rx_fifosz : 24;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct cgxx_const_s cn; */
+};
+
+static inline u64 CGXX_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CONST(void)
+{
+ return 0x2000;
+}
+
+/**
+ * Register (RSL) cgx#_const1
+ *
+ * CGX CONST1 Registers This register contains constants for software
+ * discovery.
+ */
+union cgxx_const1 {
+ u64 u;
+ struct cgxx_const1_s {
+ u64 types : 11;
+ u64 res_types : 21;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_const1_s cn; */
+};
+
+static inline u64 CGXX_CONST1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_CONST1(void)
+{
+ return 0x2008;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_rx_wol_ctrl0
+ *
+ * CGX GMP GMI RX Wake-on-LAN Control 0 Registers
+ */
+union cgxx_gmp_gmix_rx_wol_ctrl0 {
+ u64 u;
+ struct cgxx_gmp_gmix_rx_wol_ctrl0_s {
+ u64 dmac : 48;
+ u64 pswd_len : 4;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct cgxx_gmp_gmix_rx_wol_ctrl0_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL0(u64 a)
+{
+ return 0x38a00 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_rx_wol_ctrl1
+ *
+ * CGX GMP GMI RX Wake-on-LAN Control 1 Registers
+ */
+union cgxx_gmp_gmix_rx_wol_ctrl1 {
+ u64 u;
+ struct cgxx_gmp_gmix_rx_wol_ctrl1_s {
+ u64 pswd : 64;
+ } s;
+ /* struct cgxx_gmp_gmix_rx_wol_ctrl1_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL1(u64 a)
+{
+ return 0x38a08 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_tx_eee
+ *
+ * INTERNAL: CGX GMP GMI TX EEE Configure Registers Reserved. Internal:
+ * These registers control when GMP GMI TX requests to enter or exist
+ * LPI. Those registers take effect only when EEE is supported and
+ * enabled for a given LMAC.
+ */
+union cgxx_gmp_gmix_tx_eee {
+ u64 u;
+ struct cgxx_gmp_gmix_tx_eee_s {
+ u64 idle_thresh : 28;
+ u64 reserved_28 : 1;
+ u64 force_lpi : 1;
+ u64 wakeup : 1;
+ u64 auto_lpi : 1;
+ u64 idle_cnt : 28;
+ u64 tx_lpi : 1;
+ u64 tx_lpi_wait : 1;
+ u64 sync_status_lpi_enable : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct cgxx_gmp_gmix_tx_eee_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_TX_EEE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_TX_EEE(u64 a)
+{
+ return 0x38800 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_tx_eee_cfg1
+ *
+ * INTERNAL: CGX GMP GMI TX EEE Configure More Configuration Registers
+ * Reserved. Internal: Controls the GMP exiting of LPI and starting to
+ * send data.
+ */
+union cgxx_gmp_gmix_tx_eee_cfg1 {
+ u64 u;
+ struct cgxx_gmp_gmix_tx_eee_cfg1_s {
+ u64 wake2data_time : 24;
+ u64 reserved_24_35 : 12;
+ u64 tx_eee_enable : 1;
+ u64 reserved_37_39 : 3;
+ u64 sync2lpi_time : 21;
+ u64 reserved_61_63 : 3;
+ } s;
+ struct cgxx_gmp_gmix_tx_eee_cfg1_cn {
+ u64 wake2data_time : 24;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_35 : 4;
+ u64 tx_eee_enable : 1;
+ u64 reserved_37_39 : 3;
+ u64 sync2lpi_time : 21;
+ u64 reserved_61_63 : 3;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMIX_TX_EEE_CFG1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_TX_EEE_CFG1(u64 a)
+{
+ return 0x38808 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int
+ *
+ * CGX GMP GMI RX WOL Interrupt Registers These registers allow WOL
+ * interrupts to be sent to the control processor.
+ */
+union cgxx_gmp_gmix_wol_int {
+ u64 u;
+ struct cgxx_gmp_gmix_wol_int_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_gmp_gmix_wol_int_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT(u64 a)
+{
+ return 0x38a80 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int_ena_w1c
+ *
+ * CGX GMP GMI RX WOL Interrupt Enable Clear Registers This register
+ * clears interrupt enable bits.
+ */
+union cgxx_gmp_gmix_wol_int_ena_w1c {
+ u64 u;
+ struct cgxx_gmp_gmix_wol_int_ena_w1c_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_gmp_gmix_wol_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1C(u64 a)
+{
+ return 0x38a90 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int_ena_w1s
+ *
+ * CGX GMP GMI RX WOL Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmix_wol_int_ena_w1s {
+ u64 u;
+ struct cgxx_gmp_gmix_wol_int_ena_w1s_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_gmp_gmix_wol_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1S(u64 a)
+{
+ return 0x38a98 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int_w1s
+ *
+ * CGX GMP GMI RX WOL Interrupt Set Registers This register sets
+ * interrupt bits.
+ */
+union cgxx_gmp_gmix_wol_int_w1s {
+ u64 u;
+ struct cgxx_gmp_gmix_wol_int_w1s_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_gmp_gmix_wol_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT_W1S(u64 a)
+{
+ return 0x38a88 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_prt#_cfg
+ *
+ * CGX GMP GMI LMAC Configuration Registers This register controls the
+ * configuration of the LMAC.
+ */
+union cgxx_gmp_gmi_prtx_cfg {
+ u64 u;
+ struct cgxx_gmp_gmi_prtx_cfg_s {
+ u64 reserved_0 : 1;
+ u64 speed : 1;
+ u64 duplex : 1;
+ u64 slottime : 1;
+ u64 reserved_4_7 : 4;
+ u64 speed_msb : 1;
+ u64 reserved_9_11 : 3;
+ u64 rx_idle : 1;
+ u64 tx_idle : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct cgxx_gmp_gmi_prtx_cfg_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_PRTX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_PRTX_CFG(u64 a)
+{
+ return 0x38020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_decision
+ *
+ * CGX GMP Packet-Decision Registers This register specifies the byte
+ * count used to determine when to accept or to filter a packet. As each
+ * byte in a packet is received by GMI, the L2 byte count is compared
+ * against [CNT]. In normal operation, the L2 header begins after the
+ * PREAMBLE + SFD (CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] = 1) and any
+ * optional UDD skip data (CGX()_GMP_GMI_RX()_UDD_SKP[LEN]). Internal:
+ * Notes: As each byte in a packet is received by GMI, the L2 byte count
+ * is compared against the [CNT]. The L2 byte count is the number of
+ * bytes from the beginning of the L2 header (DMAC). In normal
+ * operation, the L2 header begins after the PREAMBLE+SFD
+ * (CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK]=1) and any optional UDD skip data
+ * (CGX()_GMP_GMI_RX()_UDD_SKP[LEN]). When
+ * CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] is clear, PREAMBLE+SFD are
+ * prepended to the packet and would require UDD skip length to account
+ * for them. Full Duplex: _ L2 Size \< [CNT] - Accept packet. No
+ * filtering is applied. _ L2 Size \>= [CNT] - Apply filter. Accept
+ * packet based on PAUSE packet filter. Half Duplex: _ L2 Size \<
+ * [CNT] - Drop packet. Packet is unconditionally dropped. _ L2 Size
+ * \>= [CNT] - Accept packet. where L2_size = MAX(0, total_packet_size -
+ * CGX()_GMP_GMI_RX()_UDD_SKP[LEN] -
+ * ((CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK]==1)*8)).
+ */
+union cgxx_gmp_gmi_rxx_decision {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_decision_s {
+ u64 cnt : 5;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct cgxx_gmp_gmi_rxx_decision_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_DECISION(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_DECISION(u64 a)
+{
+ return 0x38040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_frm_chk
+ *
+ * CGX GMP Frame Check Registers
+ */
+union cgxx_gmp_gmi_rxx_frm_chk {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_frm_chk_s {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 reserved_2 : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 reserved_5_6 : 2;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct cgxx_gmp_gmi_rxx_frm_chk_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CHK(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CHK(u64 a)
+{
+ return 0x38030 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_frm_ctl
+ *
+ * CGX GMP Frame Control Registers This register controls the handling of
+ * the frames. The [CTL_BCK] and [CTL_DRP] bits control how the hardware
+ * handles incoming PAUSE packets. The most common modes of operation: _
+ * [CTL_BCK] = 1, [CTL_DRP] = 1: hardware handles everything. _ [CTL_BCK]
+ * = 0, [CTL_DRP] = 0: software sees all PAUSE frames. _ [CTL_BCK] = 0,
+ * [CTL_DRP] = 1: all PAUSE frames are completely ignored. These control
+ * bits should be set to [CTL_BCK] = 0, [CTL_DRP] = 0 in half-duplex
+ * mode. Since PAUSE packets only apply to full duplex operation, any
+ * PAUSE packet would constitute an exception which should be handled by
+ * the processing cores. PAUSE packets should not be forwarded.
+ * Internal: Notes: [PRE_STRP]: When [PRE_CHK] is set (indicating that
+ * the PREAMBLE will be sent), [PRE_STRP] determines if the PREAMBLE+SFD
+ * bytes are thrown away or sent to the Octane core as part of the
+ * packet. In either mode, the PREAMBLE+SFD bytes are not counted toward
+ * the packet size when checking against the MIN and MAX bounds.
+ * Furthermore, the bytes are skipped when locating the start of the L2
+ * header for DMAC and Control frame recognition.
+ */
+union cgxx_gmp_gmi_rxx_frm_ctl {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_frm_ctl_s {
+ u64 pre_chk : 1;
+ u64 pre_strp : 1;
+ u64 ctl_drp : 1;
+ u64 ctl_bck : 1;
+ u64 ctl_mcst : 1;
+ u64 ctl_smac : 1;
+ u64 pre_free : 1;
+ u64 reserved_7_8 : 2;
+ u64 pre_align : 1;
+ u64 null_dis : 1;
+ u64 reserved_11 : 1;
+ u64 ptp_mode : 1;
+ u64 rx_fc_type : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ struct cgxx_gmp_gmi_rxx_frm_ctl_cn {
+ u64 pre_chk : 1;
+ u64 pre_strp : 1;
+ u64 ctl_drp : 1;
+ u64 ctl_bck : 1;
+ u64 ctl_mcst : 1;
+ u64 ctl_smac : 1;
+ u64 pre_free : 1;
+ u64 reserved_7 : 1;
+ u64 reserved_8 : 1;
+ u64 pre_align : 1;
+ u64 null_dis : 1;
+ u64 reserved_11 : 1;
+ u64 ptp_mode : 1;
+ u64 rx_fc_type : 1;
+ u64 reserved_14_63 : 50;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CTL(u64 a)
+{
+ return 0x38028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_ifg
+ *
+ * CGX GMI Minimum Interframe-Gap Cycles Registers This register
+ * specifies the minimum number of interframe-gap (IFG) cycles between
+ * packets.
+ */
+union cgxx_gmp_gmi_rxx_ifg {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_ifg_s {
+ u64 ifg : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_gmp_gmi_rxx_ifg_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_IFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_IFG(u64 a)
+{
+ return 0x38058 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int
+ *
+ * CGX GMP GMI RX Interrupt Registers These registers allow interrupts to
+ * be sent to the control processor. * Exception conditions \<10:0\> can
+ * also set the rcv/opcode in the received packet's work-queue entry.
+ * CGX()_GMP_GMI_RX()_FRM_CHK provides a bit mask for configuring which
+ * conditions set the error. In half duplex operation, the expectation is
+ * that collisions will appear as either MINERR or CAREXT errors.
+ * Internal: Notes: (1) exception conditions 10:0 can also set the
+ * rcv/opcode in the received packet's workQ entry. The
+ * CGX()_GMP_GMI_RX()_FRM_CHK register provides a bit mask for
+ * configuring which conditions set the error. (2) in half duplex
+ * operation, the expectation is that collisions will appear as either
+ * MINERR o r CAREXT errors. (3) JABBER An RX jabber error indicates
+ * that a packet was received which is longer than the maximum allowed
+ * packet as defined by the system. GMI will truncate the packet at the
+ * JABBER count. Failure to do so could lead to system instabilty. (4)
+ * NIBERR This error is illegal at 1000Mbs speeds
+ * (CGX()_GMP_GMI_PRT()_CFG[SPEED]==0) and will never assert. (5) MINERR
+ * total frame DA+SA+TL+DATA+PAD+FCS \< 64 (6) ALNERR Indicates that the
+ * packet received was not an integer number of bytes. If FCS checking
+ * is enabled, ALNERR will only assert if the FCS is bad. If FCS
+ * checking is disabled, ALNERR will assert in all non-integer frame
+ * cases. (7) Collisions Collisions can only occur in half-duplex mode.
+ * A collision is assumed by the receiver when the slottime
+ * (CGX()_GMP_GMI_PRT()_CFG[SLOTTIME]) is not satisfied. In 10/100 mode,
+ * this will result in a frame \< SLOTTIME. In 1000 mode, it could
+ * result either in frame \< SLOTTIME or a carrier extend error with the
+ * SLOTTIME. These conditions are visible by... . transfer ended before
+ * slottime COLDET . carrier extend error CAREXT (A) LENERR
+ * Length errors occur when the received packet does not match the length
+ * field. LENERR is only checked for packets between 64 and 1500 bytes.
+ * For untagged frames, the length must exact match. For tagged frames
+ * the length or length+4 must match. (B) PCTERR checks that the frame
+ * begins with a valid PREAMBLE sequence. Does not check the number of
+ * PREAMBLE cycles. (C) OVRERR *DON'T PUT IN HRM* OVRERR is an
+ * architectural assertion check internal to GMI to make sure no
+ * assumption was violated. In a correctly operating system, this
+ * interrupt can never fire. GMI has an internal arbiter which selects
+ * which of four ports to buffer in the main RX FIFO. If we normally
+ * buffer eight bytes, then each port will typically push a tick every
+ * eight cycles if the packet interface is going as fast as possible. If
+ * there are four ports, they push every two cycles. So that's the
+ * assumption. That the inbound module will always be able to consume
+ * the tick before another is produced. If that doesn't happen that's
+ * when OVRERR will assert."
+ */
+union cgxx_gmp_gmi_rxx_int {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_int_s {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_63 : 52;
+ } s;
+ struct cgxx_gmp_gmi_rxx_int_cn {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_15 : 4;
+ u64 reserved_16_63 : 48;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT(u64 a)
+{
+ return 0x38000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int_ena_w1c
+ *
+ * CGX GMP GMI RX Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmi_rxx_int_ena_w1c {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_int_ena_w1c_s {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_63 : 52;
+ } s;
+ struct cgxx_gmp_gmi_rxx_int_ena_w1c_cn {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_15 : 4;
+ u64 reserved_16_63 : 48;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1C(u64 a)
+{
+ return 0x38010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int_ena_w1s
+ *
+ * CGX GMP GMI RX Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmi_rxx_int_ena_w1s {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_int_ena_w1s_s {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_63 : 52;
+ } s;
+ struct cgxx_gmp_gmi_rxx_int_ena_w1s_cn {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_15 : 4;
+ u64 reserved_16_63 : 48;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1S(u64 a)
+{
+ return 0x38018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int_w1s
+ *
+ * CGX GMP GMI RX Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union cgxx_gmp_gmi_rxx_int_w1s {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_int_w1s_s {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_63 : 52;
+ } s;
+ struct cgxx_gmp_gmi_rxx_int_w1s_cn {
+ u64 minerr : 1;
+ u64 carext : 1;
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 ovrerr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 falerr : 1;
+ u64 coldet : 1;
+ u64 ifgerr : 1;
+ u64 reserved_12_15 : 4;
+ u64 reserved_16_63 : 48;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT_W1S(u64 a)
+{
+ return 0x38008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_jabber
+ *
+ * CGX GMP Maximum Packet-Size Registers This register specifies the
+ * maximum size for packets, beyond which the GMI truncates.
+ */
+union cgxx_gmp_gmi_rxx_jabber {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_jabber_s {
+ u64 cnt : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_rxx_jabber_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_JABBER(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_JABBER(u64 a)
+{
+ return 0x38038 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_udd_skp
+ *
+ * CGX GMP GMI User-Defined Data Skip Registers This register specifies
+ * the amount of user-defined data (UDD) added before the start of the
+ * L2C data. Internal: Notes: (1) The skip bytes are part of the packet
+ * and will be handled by NIX. (2) The system can determine if the UDD
+ * bytes are included in the FCS check by using the FCSSEL field - if the
+ * FCS check is enabled. (3) Assume that the preamble/sfd is always at
+ * the start of the frame - even before UDD bytes. In most cases, there
+ * will be no preamble in these cases since it will be packet interface
+ * in direct communication to another packet interface (MAC to MAC)
+ * without a PHY involved. (4) We can still do address filtering and
+ * control packet filtering is the user desires. (5)
+ * CGX()_GMP_GMI_RX()_UDD_SKP[LEN] must be 0 in half-duplex operation
+ * unless CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] is clear. If
+ * CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] is clear, then
+ * CGX()_GMP_GMI_RX()_UDD_SKP[LEN] will normally be 8. (6) In all cases,
+ * the UDD bytes will be sent down the packet interface as part of the
+ * packet. The UDD bytes are never stripped from the actual packet.
+ */
+union cgxx_gmp_gmi_rxx_udd_skp {
+ u64 u;
+ struct cgxx_gmp_gmi_rxx_udd_skp_s {
+ u64 len : 7;
+ u64 reserved_7 : 1;
+ u64 fcssel : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct cgxx_gmp_gmi_rxx_udd_skp_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_UDD_SKP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_UDD_SKP(u64 a)
+{
+ return 0x38048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_smac#
+ *
+ * CGX GMI SMAC Registers
+ */
+union cgxx_gmp_gmi_smacx {
+ u64 u;
+ struct cgxx_gmp_gmi_smacx_s {
+ u64 smac : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_gmp_gmi_smacx_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_SMACX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_SMACX(u64 a)
+{
+ return 0x38230 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_append
+ *
+ * CGX GMI TX Append Control Registers
+ */
+union cgxx_gmp_gmi_txx_append {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_append_s {
+ u64 preamble : 1;
+ u64 pad : 1;
+ u64 fcs : 1;
+ u64 force_fcs : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_append_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_APPEND(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_APPEND(u64 a)
+{
+ return 0x38218 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_burst
+ *
+ * CGX GMI TX Burst-Counter Registers
+ */
+union cgxx_gmp_gmi_txx_burst {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_burst_s {
+ u64 burst : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_burst_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_BURST(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_BURST(u64 a)
+{
+ return 0x38228 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_ctl
+ *
+ * CGX GMI Transmit Control Registers
+ */
+union cgxx_gmp_gmi_txx_ctl {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_ctl_s {
+ u64 xscol_en : 1;
+ u64 xsdef_en : 1;
+ u64 tx_fc_type : 1;
+ u64 link_drain : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_ctl_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_CTL(u64 a)
+{
+ return 0x38270 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int
+ *
+ * CGX GMI TX Interrupt Registers
+ */
+union cgxx_gmp_gmi_txx_int {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_int_s {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ struct cgxx_gmp_gmi_txx_int_cn {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_7 : 3;
+ u64 reserved_8 : 1;
+ u64 reserved_9_63 : 55;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT(u64 a)
+{
+ return 0x38500 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int_ena_w1c
+ *
+ * CGX GMI TX Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmi_txx_int_ena_w1c {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_int_ena_w1c_s {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ struct cgxx_gmp_gmi_txx_int_ena_w1c_cn {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_7 : 3;
+ u64 reserved_8 : 1;
+ u64 reserved_9_63 : 55;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1C(u64 a)
+{
+ return 0x38510 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int_ena_w1s
+ *
+ * CGX GMI TX Interrupt Enable Set Registers This register sets interrupt
+ * enable bits.
+ */
+union cgxx_gmp_gmi_txx_int_ena_w1s {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_int_ena_w1s_s {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ struct cgxx_gmp_gmi_txx_int_ena_w1s_cn {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_7 : 3;
+ u64 reserved_8 : 1;
+ u64 reserved_9_63 : 55;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1S(u64 a)
+{
+ return 0x38518 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int_w1s
+ *
+ * CGX GMI TX Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_gmp_gmi_txx_int_w1s {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_int_w1s_s {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ struct cgxx_gmp_gmi_txx_int_w1s_cn {
+ u64 undflw : 1;
+ u64 xscol : 1;
+ u64 xsdef : 1;
+ u64 late_col : 1;
+ u64 ptp_lost : 1;
+ u64 reserved_5_7 : 3;
+ u64 reserved_8 : 1;
+ u64 reserved_9_63 : 55;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT_W1S(u64 a)
+{
+ return 0x38508 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_min_pkt
+ *
+ * CGX GMI TX Minimum-Size-Packet Registers
+ */
+union cgxx_gmp_gmi_txx_min_pkt {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_min_pkt_s {
+ u64 min_size : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_min_pkt_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_MIN_PKT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_MIN_PKT(u64 a)
+{
+ return 0x38240 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_pkt_interval
+ *
+ * CGX GMI TX PAUSE-Packet Transmission-Interval Registers This register
+ * specifies how often PAUSE packets are sent. Internal: Notes: Choosing
+ * proper values of CGX()_GMP_GMI_TX()_PAUSE_PKT_TIME[PTIME] and
+ * CGX()_GMP_GMI_TX()_PAUSE_PKT_INTERVAL[INTERVAL] can be challenging to
+ * the system designer. It is suggested that TIME be much greater than
+ * INTERVAL and CGX()_GMP_GMI_TX()_PAUSE_ZERO[SEND] be set. This allows
+ * a periodic refresh of the PAUSE count and then when the backpressure
+ * condition is lifted, a PAUSE packet with TIME==0 will be sent
+ * indicating that Octane is ready for additional data. If the system
+ * chooses to not set CGX()_GMP_GMI_TX()_PAUSE_ZERO[SEND], then it is
+ * suggested that TIME and INTERVAL are programmed such that they
+ * satisify the following rule: _ INTERVAL \<= TIME - (largest_pkt_size
+ * + IFG + pause_pkt_size) where largest_pkt_size is that largest packet
+ * that the system can send (normally 1518B), IFG is the interframe gap
+ * and pause_pkt_size is the size of the PAUSE packet (normally 64B).
+ */
+union cgxx_gmp_gmi_txx_pause_pkt_interval {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_pause_pkt_interval_s {
+ u64 interval : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_pause_pkt_interval_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_INTERVAL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_INTERVAL(u64 a)
+{
+ return 0x38248 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_pkt_time
+ *
+ * CGX GMI TX PAUSE Packet PAUSE-Time Registers
+ */
+union cgxx_gmp_gmi_txx_pause_pkt_time {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_pause_pkt_time_s {
+ u64 ptime : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_pause_pkt_time_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_TIME(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_TIME(u64 a)
+{
+ return 0x38238 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_togo
+ *
+ * CGX GMI TX Time-to-Backpressure Registers
+ */
+union cgxx_gmp_gmi_txx_pause_togo {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_pause_togo_s {
+ u64 ptime : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_pause_togo_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_TOGO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_TOGO(u64 a)
+{
+ return 0x38258 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_zero
+ *
+ * CGX GMI TX PAUSE-Zero-Enable Registers
+ */
+union cgxx_gmp_gmi_txx_pause_zero {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_pause_zero_s {
+ u64 send : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_pause_zero_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_ZERO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_ZERO(u64 a)
+{
+ return 0x38260 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_sgmii_ctl
+ *
+ * CGX SGMII Control Registers
+ */
+union cgxx_gmp_gmi_txx_sgmii_ctl {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_sgmii_ctl_s {
+ u64 align : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_sgmii_ctl_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_SGMII_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_SGMII_CTL(u64 a)
+{
+ return 0x38300 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_slot
+ *
+ * CGX GMI TX Slottime Counter Registers
+ */
+union cgxx_gmp_gmi_txx_slot {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_slot_s {
+ u64 slot : 10;
+ u64 reserved_10_63 : 54;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_slot_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_SLOT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_SLOT(u64 a)
+{
+ return 0x38220 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_soft_pause
+ *
+ * CGX GMI TX Software PAUSE Registers
+ */
+union cgxx_gmp_gmi_txx_soft_pause {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_soft_pause_s {
+ u64 ptime : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_soft_pause_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_SOFT_PAUSE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_SOFT_PAUSE(u64 a)
+{
+ return 0x38250 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_thresh
+ *
+ * CGX GMI TX Threshold Registers
+ */
+union cgxx_gmp_gmi_txx_thresh {
+ u64 u;
+ struct cgxx_gmp_gmi_txx_thresh_s {
+ u64 cnt : 11;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct cgxx_gmp_gmi_txx_thresh_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_THRESH(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_THRESH(u64 a)
+{
+ return 0x38210 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_col_attempt
+ *
+ * CGX TX Collision Attempts Before Dropping Frame Registers
+ */
+union cgxx_gmp_gmi_tx_col_attempt {
+ u64 u;
+ struct cgxx_gmp_gmi_tx_col_attempt_s {
+ u64 limit : 5;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct cgxx_gmp_gmi_tx_col_attempt_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_COL_ATTEMPT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_COL_ATTEMPT(void)
+{
+ return 0x39010;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_ifg
+ *
+ * CGX GMI TX Interframe-Gap Cycles Registers Consider the following when
+ * programming IFG1 and IFG2: * For 10/100/1000 Mb/s half-duplex systems
+ * that require IEEE 802.3 compatibility, IFG1 must be in the range of
+ * 1-8, [IFG2] must be in the range of 4-12, and the [IFG1] + [IFG2] sum
+ * must be 12. * For 10/100/1000 Mb/s full-duplex systems that require
+ * IEEE 802.3 compatibility, IFG1 must be in the range of 1-11, [IFG2]
+ * must be in the range of 1-11, and the [IFG1] + [IFG2] sum must be 12.
+ * For all other systems, IFG1 and IFG2 can be any value in the range of
+ * 1-15, allowing for a total possible IFG sum of 2-30.
+ */
+union cgxx_gmp_gmi_tx_ifg {
+ u64 u;
+ struct cgxx_gmp_gmi_tx_ifg_s {
+ u64 ifg1 : 4;
+ u64 ifg2 : 4;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct cgxx_gmp_gmi_tx_ifg_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_IFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_IFG(void)
+{
+ return 0x39000;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_jam
+ *
+ * CGX GMI TX JAM Pattern Registers This register provides the pattern
+ * used in JAM bytes.
+ */
+union cgxx_gmp_gmi_tx_jam {
+ u64 u;
+ struct cgxx_gmp_gmi_tx_jam_s {
+ u64 jam : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct cgxx_gmp_gmi_tx_jam_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_JAM(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_JAM(void)
+{
+ return 0x39008;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_lfsr
+ *
+ * CGX GMI TX LFSR Registers This register shows the contents of the
+ * linear feedback shift register (LFSR), which is used to implement
+ * truncated binary exponential backoff.
+ */
+union cgxx_gmp_gmi_tx_lfsr {
+ u64 u;
+ struct cgxx_gmp_gmi_tx_lfsr_s {
+ u64 lfsr : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_tx_lfsr_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_LFSR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_LFSR(void)
+{
+ return 0x39028;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_pause_pkt_dmac
+ *
+ * CGX TX PAUSE-Packet DMAC-Field Registers
+ */
+union cgxx_gmp_gmi_tx_pause_pkt_dmac {
+ u64 u;
+ struct cgxx_gmp_gmi_tx_pause_pkt_dmac_s {
+ u64 dmac : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_gmp_gmi_tx_pause_pkt_dmac_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_DMAC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_DMAC(void)
+{
+ return 0x39018;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_pause_pkt_type
+ *
+ * CGX GMI TX PAUSE-Packet-PTYPE Field Registers This register provides
+ * the PTYPE field that is placed in outbound PAUSE packets.
+ */
+union cgxx_gmp_gmi_tx_pause_pkt_type {
+ u64 u;
+ struct cgxx_gmp_gmi_tx_pause_pkt_type_s {
+ u64 ptype : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_gmi_tx_pause_pkt_type_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_TYPE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_TYPE(void)
+{
+ return 0x39020;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_misc#_cfg
+ *
+ * CGX GMP PCS Miscellaneous Control Registers This register contains
+ * general configuration that should not need to be changed from reset
+ * settings. Internal: Per lmac diagnostic and chicken bits.
+ */
+union cgxx_gmp_miscx_cfg {
+ u64 u;
+ struct cgxx_gmp_miscx_cfg_s {
+ u64 tx_eee_quiet_credit_mode : 1;
+ u64 tx_eee_wait_gmi_fast_idle : 1;
+ u64 tx_qsgmii_port0_init : 1;
+ u64 tx_eee_rx_sync_status_enable : 1;
+ u64 pcs_alt_an : 1;
+ u64 reserved_5_7 : 3;
+ u64 rx_pcs_sync_signal_detect : 1;
+ u64 rx_pcs_sync_timeout : 1;
+ u64 rx_pcs_eee_mode_enable : 1;
+ u64 rx_pcs_lpi_enable : 1;
+ u64 rx_pcs_802_rx_k : 1;
+ u64 rx_pcs_alt_qlb2i : 1;
+ u64 reserved_14_15 : 2;
+ u64 rx_cgp_gser_throttle : 1;
+ u64 rx_cgp_edet_filter : 1;
+ u64 rx_cgp_edet_qlm_val : 1;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct cgxx_gmp_miscx_cfg_s cn; */
+};
+
+static inline u64 CGXX_GMP_MISCX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_MISCX_CFG(u64 a)
+{
+ return 0x34000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_an_expansion
+ *
+ * CGX GMP PCS AN Expansion register Register 6 AN status
+ */
+union cgxx_gmp_pcsx_an_expansion {
+ u64 u;
+ struct cgxx_gmp_pcsx_an_expansion_s {
+ u64 reserved_0 : 1;
+ u64 page_received : 1;
+ u64 next_page_able : 1;
+ u64 reserved_3_63 : 61;
+ } s;
+ /* struct cgxx_gmp_pcsx_an_expansion_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_AN_EXPANSION(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_AN_EXPANSION(u64 a)
+{
+ return 0x30a60 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_an_lp_abil_np
+ *
+ * CGX GMP PCS AN Link Partner Ability Next Page Register 8 This register
+ * contains the advertised ability of the link partners Next Page. The
+ * definition for this register is provided in 32.5.4.2 for changes to
+ * 28.2.4.1.4.
+ */
+union cgxx_gmp_pcsx_an_lp_abil_np {
+ u64 u;
+ struct cgxx_gmp_pcsx_an_lp_abil_np_s {
+ u64 m_u : 11;
+ u64 toggle : 1;
+ u64 ack2 : 1;
+ u64 mp : 1;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcsx_an_lp_abil_np_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_AN_LP_ABIL_NP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_AN_LP_ABIL_NP(u64 a)
+{
+ return 0x30a80 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_an_np_tx
+ *
+ * CGX GMP PCS AN Next Page Transmit Register 7 Software programs this
+ * register with the contents of the AN message next page or unformatted
+ * next page link code word to be transmitted during autonegotiation.
+ * Next page exchange occurs after the base link code words have been
+ * exchanged if either end of the link segment sets the NP bit to 1,
+ * indicating that it has at least one next page to send. Once initiated,
+ * next page exchange continues until both ends of the link segment set
+ * their NP bits to 0. Both sides must be NP capable to use NP exchanges.
+ */
+union cgxx_gmp_pcsx_an_np_tx {
+ u64 u;
+ struct cgxx_gmp_pcsx_an_np_tx_s {
+ u64 m_u : 11;
+ u64 toggle : 1;
+ u64 ack2 : 1;
+ u64 mp : 1;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcsx_an_np_tx_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_AN_NP_TX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_AN_NP_TX(u64 a)
+{
+ return 0x30a70 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_dbg_control
+ *
+ * CGX PCS Debug Control Registers
+ */
+union cgxx_gmp_pcsx_dbg_control {
+ u64 u;
+ struct cgxx_gmp_pcsx_dbg_control_s {
+ u64 us_clk_period : 7;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_gmp_pcsx_dbg_control_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_DBG_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_DBG_CONTROL(u64 a)
+{
+ return 0x31000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_rx_eee_wake
+ *
+ * INTERNAL: CGX GMP PCS RX EEE Wake Error Counter Registers Reserved.
+ * Internal: This register is used by PHY types that support EEE to count
+ * wake time faults where the PHY fails to complete its normal wake
+ * sequence within the time required for the specific PHY type. The
+ * definition of the fault event to be counted is defined for each PHY
+ * and may occur during a refresh or a wake-up as defined by the PHY.
+ * This 16-bit counter shall be reset to all zeros upon execution of the
+ * PCS reset. This counter shall be held at all ones in the case of
+ * overflow.
+ */
+union cgxx_gmp_pcsx_rx_eee_wake {
+ u64 u;
+ struct cgxx_gmp_pcsx_rx_eee_wake_s {
+ u64 error_counter : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcsx_rx_eee_wake_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_RX_EEE_WAKE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_RX_EEE_WAKE(u64 a)
+{
+ return 0x30910 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_rx_lpi_timing
+ *
+ * INTERNAL: CGX GMP PCS RX EEE LPI Timing Parameters Registers
+ * Reserved. Internal: Receiver LPI timing parameters Tqr, Twr and Twtf.
+ */
+union cgxx_gmp_pcsx_rx_lpi_timing {
+ u64 u;
+ struct cgxx_gmp_pcsx_rx_lpi_timing_s {
+ u64 twtf : 18;
+ u64 reserved_18_19 : 2;
+ u64 twr : 12;
+ u64 tqr : 20;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct cgxx_gmp_pcsx_rx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_RX_LPI_TIMING(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_RX_LPI_TIMING(u64 a)
+{
+ return 0x30900 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_status1
+ *
+ * CGX GMP PCS Status 1 Register PCS LPI Status, Link OK. Register 3.1
+ */
+union cgxx_gmp_pcsx_status1 {
+ u64 u;
+ struct cgxx_gmp_pcsx_status1_s {
+ u64 reserved_0_1 : 2;
+ u64 receive_link_status : 1;
+ u64 reserved_3_7 : 5;
+ u64 rx_lpi_indication : 1;
+ u64 tx_lpi_indication : 1;
+ u64 rx_lpi_received : 1;
+ u64 tx_lpi_received : 1;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct cgxx_gmp_pcsx_status1_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_STATUS1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_STATUS1(u64 a)
+{
+ return 0x30880 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_tx_lpi_timing
+ *
+ * INTERNAL: CGX GMP GMI TX EEE LPI Timing Parameters Registers
+ * Reserved. Internal: Transmitter LPI timing parameters Tsl, Tql and
+ * Tul.
+ */
+union cgxx_gmp_pcsx_tx_lpi_timing {
+ u64 u;
+ struct cgxx_gmp_pcsx_tx_lpi_timing_s {
+ u64 tql : 19;
+ u64 reserved_19_31 : 13;
+ u64 tul : 12;
+ u64 reserved_44_47 : 4;
+ u64 tsl : 12;
+ u64 reserved_60_63 : 4;
+ } s;
+ /* struct cgxx_gmp_pcsx_tx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_TX_LPI_TIMING(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_TX_LPI_TIMING(u64 a)
+{
+ return 0x30800 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_adv
+ *
+ * CGX GMP PCS Autonegotiation Advertisement Registers
+ */
+union cgxx_gmp_pcs_anx_adv {
+ u64 u;
+ struct cgxx_gmp_pcs_anx_adv_s {
+ u64 reserved_0_4 : 5;
+ u64 fd : 1;
+ u64 hfd : 1;
+ u64 pause : 2;
+ u64 reserved_9_11 : 3;
+ u64 rem_flt : 2;
+ u64 reserved_14 : 1;
+ u64 np : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_anx_adv_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_ADV(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_ADV(u64 a)
+{
+ return 0x30010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_ext_st
+ *
+ * CGX GMO PCS Autonegotiation Extended Status Registers
+ */
+union cgxx_gmp_pcs_anx_ext_st {
+ u64 u;
+ struct cgxx_gmp_pcs_anx_ext_st_s {
+ u64 reserved_0_11 : 12;
+ u64 thou_thd : 1;
+ u64 thou_tfd : 1;
+ u64 thou_xhd : 1;
+ u64 thou_xfd : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_anx_ext_st_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_EXT_ST(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_EXT_ST(u64 a)
+{
+ return 0x30028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_lp_abil
+ *
+ * CGX GMP PCS Autonegotiation Link Partner Ability Registers This is the
+ * autonegotiation link partner ability register 5 as per IEEE 802.3,
+ * Clause 37.
+ */
+union cgxx_gmp_pcs_anx_lp_abil {
+ u64 u;
+ struct cgxx_gmp_pcs_anx_lp_abil_s {
+ u64 reserved_0_4 : 5;
+ u64 fd : 1;
+ u64 hfd : 1;
+ u64 pause : 2;
+ u64 reserved_9_11 : 3;
+ u64 rem_flt : 2;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_anx_lp_abil_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_LP_ABIL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_LP_ABIL(u64 a)
+{
+ return 0x30018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_results
+ *
+ * CGX GMP PCS Autonegotiation Results Registers This register is not
+ * valid when CGX()_GMP_PCS_MISC()_CTL[AN_OVRD] is set to 1. If
+ * CGX()_GMP_PCS_MISC()_CTL[AN_OVRD] is set to 0 and
+ * CGX()_GMP_PCS_AN()_RESULTS[AN_CPT] is set to 1, this register is
+ * valid.
+ */
+union cgxx_gmp_pcs_anx_results {
+ u64 u;
+ struct cgxx_gmp_pcs_anx_results_s {
+ u64 link_ok : 1;
+ u64 dup : 1;
+ u64 an_cpt : 1;
+ u64 spd : 2;
+ u64 pause : 2;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_gmp_pcs_anx_results_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_RESULTS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_RESULTS(u64 a)
+{
+ return 0x30020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#
+ *
+ * CGX GMP PCS Interrupt Registers
+ */
+union cgxx_gmp_pcs_intx {
+ u64 u;
+ struct cgxx_gmp_pcs_intx_s {
+ u64 lnkspd : 1;
+ u64 xmit : 1;
+ u64 an_err : 1;
+ u64 txfifu : 1;
+ u64 txfifo : 1;
+ u64 txbad : 1;
+ u64 rxerr : 1;
+ u64 rxbad : 1;
+ u64 rxlock : 1;
+ u64 an_bad : 1;
+ u64 sync_bad : 1;
+ u64 dup : 1;
+ u64 dbg_sync : 1;
+ u64 reserved_13_15 : 3;
+ u64 an_page_received : 1;
+ u64 an_complete : 1;
+ u64 reserved_18_19 : 2;
+ u64 eee_tx_change : 1;
+ u64 eee_rx_change : 1;
+ u64 eee_rx_link_fail : 1;
+ u64 reserved_23_63 : 41;
+ } s;
+ /* struct cgxx_gmp_pcs_intx_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX(u64 a)
+{
+ return 0x30080 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#_ena_w1c
+ *
+ * CGX GMP PCS Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_gmp_pcs_intx_ena_w1c {
+ u64 u;
+ struct cgxx_gmp_pcs_intx_ena_w1c_s {
+ u64 lnkspd : 1;
+ u64 xmit : 1;
+ u64 an_err : 1;
+ u64 txfifu : 1;
+ u64 txfifo : 1;
+ u64 txbad : 1;
+ u64 rxerr : 1;
+ u64 rxbad : 1;
+ u64 rxlock : 1;
+ u64 an_bad : 1;
+ u64 sync_bad : 1;
+ u64 dup : 1;
+ u64 dbg_sync : 1;
+ u64 reserved_13_15 : 3;
+ u64 an_page_received : 1;
+ u64 an_complete : 1;
+ u64 reserved_18_19 : 2;
+ u64 eee_tx_change : 1;
+ u64 eee_rx_change : 1;
+ u64 eee_rx_link_fail : 1;
+ u64 reserved_23_63 : 41;
+ } s;
+ /* struct cgxx_gmp_pcs_intx_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1C(u64 a)
+{
+ return 0x30090 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#_ena_w1s
+ *
+ * CGX GMP PCS Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_gmp_pcs_intx_ena_w1s {
+ u64 u;
+ struct cgxx_gmp_pcs_intx_ena_w1s_s {
+ u64 lnkspd : 1;
+ u64 xmit : 1;
+ u64 an_err : 1;
+ u64 txfifu : 1;
+ u64 txfifo : 1;
+ u64 txbad : 1;
+ u64 rxerr : 1;
+ u64 rxbad : 1;
+ u64 rxlock : 1;
+ u64 an_bad : 1;
+ u64 sync_bad : 1;
+ u64 dup : 1;
+ u64 dbg_sync : 1;
+ u64 reserved_13_15 : 3;
+ u64 an_page_received : 1;
+ u64 an_complete : 1;
+ u64 reserved_18_19 : 2;
+ u64 eee_tx_change : 1;
+ u64 eee_rx_change : 1;
+ u64 eee_rx_link_fail : 1;
+ u64 reserved_23_63 : 41;
+ } s;
+ /* struct cgxx_gmp_pcs_intx_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1S(u64 a)
+{
+ return 0x30098 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#_w1s
+ *
+ * CGX GMP PCS Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_gmp_pcs_intx_w1s {
+ u64 u;
+ struct cgxx_gmp_pcs_intx_w1s_s {
+ u64 lnkspd : 1;
+ u64 xmit : 1;
+ u64 an_err : 1;
+ u64 txfifu : 1;
+ u64 txfifo : 1;
+ u64 txbad : 1;
+ u64 rxerr : 1;
+ u64 rxbad : 1;
+ u64 rxlock : 1;
+ u64 an_bad : 1;
+ u64 sync_bad : 1;
+ u64 dup : 1;
+ u64 dbg_sync : 1;
+ u64 reserved_13_15 : 3;
+ u64 an_page_received : 1;
+ u64 an_complete : 1;
+ u64 reserved_18_19 : 2;
+ u64 eee_tx_change : 1;
+ u64 eee_rx_change : 1;
+ u64 eee_rx_link_fail : 1;
+ u64 reserved_23_63 : 41;
+ } s;
+ /* struct cgxx_gmp_pcs_intx_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX_W1S(u64 a)
+{
+ return 0x30088 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_link#_timer
+ *
+ * CGX GMP PCS Link Timer Registers This is the 1.6 ms nominal link timer
+ * register.
+ */
+union cgxx_gmp_pcs_linkx_timer {
+ u64 u;
+ struct cgxx_gmp_pcs_linkx_timer_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_linkx_timer_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_LINKX_TIMER(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_LINKX_TIMER(u64 a)
+{
+ return 0x30040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_misc#_ctl
+ *
+ * CGX GMP SGMII Miscellaneous Control Registers Internal: SGMII bit [12]
+ * is really a misnomer, it is a decode of pi_qlm_cfg pins to indicate
+ * SGMII or 1000Base-X modes. Note: The SGMII AN Advertisement Register
+ * above will be sent during Auto Negotiation if [MAC_PHY] is set (1=PHY
+ * mode). If the bit is not set (0=MAC mode), the tx_Config_Reg\<14\>
+ * becomes ACK bit and tx_Config_Reg\<0\> is always 1. All other bits in
+ * tx_Config_Reg sent will be 0. The PHY dictates the Auto Negotiation
+ * results.
+ */
+union cgxx_gmp_pcs_miscx_ctl {
+ u64 u;
+ struct cgxx_gmp_pcs_miscx_ctl_s {
+ u64 samp_pt : 7;
+ u64 an_ovrd : 1;
+ u64 mode : 1;
+ u64 mac_phy : 1;
+ u64 loopbck2 : 1;
+ u64 gmxeno : 1;
+ u64 reserved_12 : 1;
+ u64 disp_en : 1;
+ u64 reserved_14_15 : 2;
+ u64 qsgmii_comma_wd : 16;
+ u64 qsgmii_comma_wd_en : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ struct cgxx_gmp_pcs_miscx_ctl_cn {
+ u64 samp_pt : 7;
+ u64 an_ovrd : 1;
+ u64 mode : 1;
+ u64 mac_phy : 1;
+ u64 loopbck2 : 1;
+ u64 gmxeno : 1;
+ u64 reserved_12 : 1;
+ u64 disp_en : 1;
+ u64 reserved_14_15 : 2;
+ u64 qsgmii_comma_wd : 16;
+ u64 qsgmii_comma_wd_en : 1;
+ u64 reserved_33_35 : 3;
+ u64 reserved_36_63 : 28;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_PCS_MISCX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_MISCX_CTL(u64 a)
+{
+ return 0x30078 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_mr#_control
+ *
+ * CGX GMP PCS Control Registers
+ */
+union cgxx_gmp_pcs_mrx_control {
+ u64 u;
+ struct cgxx_gmp_pcs_mrx_control_s {
+ u64 reserved_0_4 : 5;
+ u64 uni : 1;
+ u64 spdmsb : 1;
+ u64 coltst : 1;
+ u64 dup : 1;
+ u64 rst_an : 1;
+ u64 reserved_10 : 1;
+ u64 pwr_dn : 1;
+ u64 an_en : 1;
+ u64 spdlsb : 1;
+ u64 loopbck1 : 1;
+ u64 reset : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_mrx_control_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_MRX_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_MRX_CONTROL(u64 a)
+{
+ return 0x30000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_mr#_status
+ *
+ * CGX GMP PCS Status Registers Bits \<15:9\> in this register indicate
+ * the ability to operate when CGX()_GMP_PCS_MISC()_CTL[MAC_PHY] is set
+ * to MAC mode. Bits \<15:9\> are always read as 0, indicating that the
+ * chip cannot operate in the corresponding modes. The field [RM_FLT] is
+ * a 'don't care' when the selected mode is SGMII/QSGMII.
+ */
+union cgxx_gmp_pcs_mrx_status {
+ u64 u;
+ struct cgxx_gmp_pcs_mrx_status_s {
+ u64 extnd : 1;
+ u64 reserved_1 : 1;
+ u64 lnk_st : 1;
+ u64 an_abil : 1;
+ u64 rm_flt : 1;
+ u64 an_cpt : 1;
+ u64 prb_sup : 1;
+ u64 reserved_7 : 1;
+ u64 ext_st : 1;
+ u64 hun_t2hd : 1;
+ u64 hun_t2fd : 1;
+ u64 ten_hd : 1;
+ u64 ten_fd : 1;
+ u64 hun_xhd : 1;
+ u64 hun_xfd : 1;
+ u64 hun_t4 : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_mrx_status_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_MRX_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_MRX_STATUS(u64 a)
+{
+ return 0x30008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_rx#_states
+ *
+ * CGX GMP PCS RX State-Machines States Registers
+ */
+union cgxx_gmp_pcs_rxx_states {
+ u64 u;
+ struct cgxx_gmp_pcs_rxx_states_s {
+ u64 an_st : 4;
+ u64 an_bad : 1;
+ u64 sync : 4;
+ u64 sync_bad : 1;
+ u64 rx_st : 5;
+ u64 rx_bad : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_rxx_states_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_RXX_STATES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_RXX_STATES(u64 a)
+{
+ return 0x30058 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_rx#_sync
+ *
+ * CGX GMP PCS Code Group Synchronization Registers
+ */
+union cgxx_gmp_pcs_rxx_sync {
+ u64 u;
+ struct cgxx_gmp_pcs_rxx_sync_s {
+ u64 bit_lock : 1;
+ u64 sync : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_gmp_pcs_rxx_sync_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_RXX_SYNC(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_RXX_SYNC(u64 a)
+{
+ return 0x30050 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_sgm#_an_adv
+ *
+ * CGX GMP PCS SGMII Autonegotiation Advertisement Registers This is the
+ * SGMII autonegotiation advertisement register (sent out as
+ * tx_Config_Reg\<15:0\> as defined in IEEE 802.3 clause 37). This
+ * register is sent during autonegotiation if
+ * CGX()_GMP_PCS_MISC()_CTL[MAC_PHY] is set (1 = PHY mode). If the bit is
+ * not set (0 = MAC mode), then tx_Config_Reg\<14\> becomes ACK bit and
+ * tx_Config_Reg\<0\> is always 1. All other bits in tx_Config_Reg sent
+ * will be 0. The PHY dictates the autonegotiation results.
+ */
+union cgxx_gmp_pcs_sgmx_an_adv {
+ u64 u;
+ struct cgxx_gmp_pcs_sgmx_an_adv_s {
+ u64 one : 1;
+ u64 reserved_1_9 : 9;
+ u64 speed : 2;
+ u64 dup : 1;
+ u64 reserved_13 : 1;
+ u64 ack : 1;
+ u64 link : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_gmp_pcs_sgmx_an_adv_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_SGMX_AN_ADV(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_SGMX_AN_ADV(u64 a)
+{
+ return 0x30068 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_sgm#_lp_adv
+ *
+ * CGX GMP PCS SGMII Link-Partner-Advertisement Registers This is the
+ * SGMII link partner advertisement register (received as
+ * rx_Config_Reg\<15:0\> as defined in IEEE 802.3 clause 37).
+ */
+union cgxx_gmp_pcs_sgmx_lp_adv {
+ u64 u;
+ struct cgxx_gmp_pcs_sgmx_lp_adv_s {
+ u64 one : 1;
+ u64 reserved_1_9 : 9;
+ u64 speed : 2;
+ u64 dup : 1;
+ u64 reserved_13_14 : 2;
+ u64 link : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ struct cgxx_gmp_pcs_sgmx_lp_adv_cn {
+ u64 one : 1;
+ u64 reserved_1_9 : 9;
+ u64 speed : 2;
+ u64 dup : 1;
+ u64 reserved_13 : 1;
+ u64 reserved_14 : 1;
+ u64 link : 1;
+ u64 reserved_16_63 : 48;
+ } cn;
+};
+
+static inline u64 CGXX_GMP_PCS_SGMX_LP_ADV(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_SGMX_LP_ADV(u64 a)
+{
+ return 0x30070 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_tx#_states
+ *
+ * CGX GMP PCS TX State-Machines States Registers
+ */
+union cgxx_gmp_pcs_txx_states {
+ u64 u;
+ struct cgxx_gmp_pcs_txx_states_s {
+ u64 ord_st : 4;
+ u64 tx_bad : 1;
+ u64 xmit : 2;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_gmp_pcs_txx_states_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_TXX_STATES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_TXX_STATES(u64 a)
+{
+ return 0x30060 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_tx_rx#_polarity
+ *
+ * CGX GMP PCS TX/RX Polarity Registers
+ * CGX()_GMP_PCS_TX_RX()_POLARITY[AUTORXPL] shows correct polarity needed
+ * on the link receive path after code group synchronization is achieved.
+ * When LMAC_TYPE=QSGMII, only lane 0 polarity data and settings are
+ * relevant and settings for lanes 1, 2 and 3 are unused.
+ */
+union cgxx_gmp_pcs_tx_rxx_polarity {
+ u64 u;
+ struct cgxx_gmp_pcs_tx_rxx_polarity_s {
+ u64 txplrt : 1;
+ u64 rxplrt : 1;
+ u64 autorxpl : 1;
+ u64 rxovrd : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_gmp_pcs_tx_rxx_polarity_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_TX_RXX_POLARITY(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_TX_RXX_POLARITY(u64 a)
+{
+ return 0x30048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_msix_pba#
+ *
+ * CGX MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table, the bit number is indexed by the CGX_INT_VEC_E enumeration.
+ */
+union cgxx_msix_pbax {
+ u64 u;
+ struct cgxx_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct cgxx_msix_pbax_s cn; */
+};
+
+static inline u64 CGXX_MSIX_PBAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_MSIX_PBAX(u64 a)
+{
+ return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_msix_vec#_addr
+ *
+ * CGX MSI-X Vector Table Address Registers This register is the MSI-X
+ * vector table, indexed by the CGX_INT_VEC_E enumeration.
+ */
+union cgxx_msix_vecx_addr {
+ u64 u;
+ struct cgxx_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 51;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct cgxx_msix_vecx_addr_s cn; */
+};
+
+static inline u64 CGXX_MSIX_VECX_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_MSIX_VECX_ADDR(u64 a)
+{
+ return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) cgx#_msix_vec#_ctl
+ *
+ * CGX MSI-X Vector Table Control and Data Registers This register is the
+ * MSI-X vector table, indexed by the CGX_INT_VEC_E enumeration.
+ */
+union cgxx_msix_vecx_ctl {
+ u64 u;
+ struct cgxx_msix_vecx_ctl_s {
+ u64 data : 32;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct cgxx_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 CGXX_MSIX_VECX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_MSIX_VECX_CTL(u64 a)
+{
+ return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_bp_test
+ *
+ * INTERNAL: CGX SMU TX Backpressure Test Registers
+ */
+union cgxx_smux_bp_test {
+ u64 u;
+ struct cgxx_smux_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_47 : 24;
+ u64 enable : 4;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct cgxx_smux_bp_test_s cn; */
+};
+
+static inline u64 CGXX_SMUX_BP_TEST(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_BP_TEST(u64 a)
+{
+ return 0x20230 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_cbfc_ctl
+ *
+ * CGX SMU PFC Control Registers Internal: INTERNAL: XOFF for a specific
+ * class/channel \<i\> is XOFF\<i\> = ([PHYS_EN]\<i\> & cmr_rx_phys_bp) |
+ * ([LOGL_EN]\<i\> & cmr_rx_logl_xoff\<i\>).
+ */
+union cgxx_smux_cbfc_ctl {
+ u64 u;
+ struct cgxx_smux_cbfc_ctl_s {
+ u64 rx_en : 1;
+ u64 tx_en : 1;
+ u64 drp_en : 1;
+ u64 bck_en : 1;
+ u64 reserved_4_31 : 28;
+ u64 logl_en : 16;
+ u64 phys_en : 16;
+ } s;
+ /* struct cgxx_smux_cbfc_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_CBFC_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_CBFC_CTL(u64 a)
+{
+ return 0x20218 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_ctrl
+ *
+ * CGX SMU Control Registers
+ */
+union cgxx_smux_ctrl {
+ u64 u;
+ struct cgxx_smux_ctrl_s {
+ u64 rx_idle : 1;
+ u64 tx_idle : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_smux_ctrl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_CTRL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_CTRL(u64 a)
+{
+ return 0x20200 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_ext_loopback
+ *
+ * CGX SMU External Loopback Registers In loopback mode, the IFG1+IFG2 of
+ * local and remote parties must match exactly; otherwise loopback FIFO
+ * will overrun: CGX()_SMU()_TX_INT[LB_OVRFLW].
+ */
+union cgxx_smux_ext_loopback {
+ u64 u;
+ struct cgxx_smux_ext_loopback_s {
+ u64 thresh : 6;
+ u64 reserved_6_7 : 2;
+ u64 depth : 6;
+ u64 reserved_14_15 : 2;
+ u64 en : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct cgxx_smux_ext_loopback_s cn; */
+};
+
+static inline u64 CGXX_SMUX_EXT_LOOPBACK(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_EXT_LOOPBACK(u64 a)
+{
+ return 0x20208 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_hg2_control
+ *
+ * CGX SMU HiGig2 Control Registers HiGig2 TX- and RX-enable are normally
+ * set together for HiGig2 messaging. Setting just the TX or RX bit
+ * results in only the HG2 message transmit or receive capability.
+ * Setting [PHYS_EN] and [LOGL_EN] to 1 allows link PAUSE or backpressure
+ * to NIX as per the received HiGig2 message. Setting these fields to 0
+ * disables link PAUSE and backpressure to NIX in response to received
+ * messages. CGX()_SMU()_TX_CTL[HG_EN] must be set (to enable HiGig)
+ * whenever either [HG2TX_EN] or [HG2RX_EN] are set.
+ * CGX()_SMU()_RX_UDD_SKP[LEN] must be set to 16 (to select HiGig2)
+ * whenever either [HG2TX_EN] or [HG2RX_EN] are set.
+ * CGX()_CMR_RX_OVR_BP[EN]\<0\> must be set and
+ * CGX()_CMR_RX_OVR_BP[BP]\<0\> must be cleared to 0 (to forcibly disable
+ * hardware-automatic 802.3 PAUSE packet generation) with the HiGig2
+ * Protocol when [HG2TX_EN] = 0. (The HiGig2 protocol is indicated by
+ * CGX()_SMU()_TX_CTL[HG_EN] = 1 and CGX()_SMU()_RX_UDD_SKP[LEN]=16.)
+ * Hardware can only autogenerate backpressure via HiGig2 messages
+ * (optionally, when [HG2TX_EN] = 1) with the HiGig2 protocol.
+ */
+union cgxx_smux_hg2_control {
+ u64 u;
+ struct cgxx_smux_hg2_control_s {
+ u64 logl_en : 16;
+ u64 phys_en : 1;
+ u64 hg2rx_en : 1;
+ u64 hg2tx_en : 1;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct cgxx_smux_hg2_control_s cn; */
+};
+
+static inline u64 CGXX_SMUX_HG2_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_HG2_CONTROL(u64 a)
+{
+ return 0x20210 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_mmsi_ctl_sta
+ *
+ * CGX SMU MAC Merge Service Interface (MMSI) Control/Status Registers
+ * MMSI control and status registers for frame preemption mode. Refer to
+ * IEEE 802.3br, Clause 99.
+ */
+union cgxx_smux_mmsi_ctl_sta {
+ u64 u;
+ struct cgxx_smux_mmsi_ctl_sta_s {
+ u64 p_en : 1;
+ u64 dis_v : 1;
+ u64 afs : 2;
+ u64 v_sta : 3;
+ u64 tx_pactive : 1;
+ u64 reserved_8_31 : 24;
+ u64 v_time : 24;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct cgxx_smux_mmsi_ctl_sta_s cn; */
+};
+
+static inline u64 CGXX_SMUX_MMSI_CTL_STA(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_MMSI_CTL_STA(u64 a)
+{
+ return 0x20220 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_bad_col_ctrl
+ *
+ * CGX SMU RX Bad Column High Registers
+ */
+union cgxx_smux_rx_bad_col_ctrl {
+ u64 u;
+ struct cgxx_smux_rx_bad_col_ctrl_s {
+ u64 lane_rxc : 16;
+ u64 state : 3;
+ u64 val : 1;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct cgxx_smux_rx_bad_col_ctrl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_BAD_COL_CTRL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_BAD_COL_CTRL(u64 a)
+{
+ return 0x20060 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_bad_col_data_hi
+ *
+ * CGX SMU RX Bad Column Low Registers
+ */
+union cgxx_smux_rx_bad_col_data_hi {
+ u64 u;
+ struct cgxx_smux_rx_bad_col_data_hi_s {
+ u64 lane_rxd : 64;
+ } s;
+ /* struct cgxx_smux_rx_bad_col_data_hi_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_HI(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_HI(u64 a)
+{
+ return 0x20058 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_bad_col_data_lo
+ *
+ * CGX SMU RX Bad Column Low Registers
+ */
+union cgxx_smux_rx_bad_col_data_lo {
+ u64 u;
+ struct cgxx_smux_rx_bad_col_data_lo_s {
+ u64 lane_rxd : 64;
+ } s;
+ /* struct cgxx_smux_rx_bad_col_data_lo_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_LO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_LO(u64 a)
+{
+ return 0x20050 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_ctl
+ *
+ * CGX SMU RX Control Registers
+ */
+union cgxx_smux_rx_ctl {
+ u64 u;
+ struct cgxx_smux_rx_ctl_s {
+ u64 status : 2;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_smux_rx_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_CTL(u64 a)
+{
+ return 0x20048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_decision
+ *
+ * CGX SMU Packet Decision Registers This register specifies the byte
+ * count used to determine when to accept or to filter a packet. As each
+ * byte in a packet is received by CGX, the L2 byte count (i.e. the
+ * number of bytes from the beginning of the L2 header (DMAC)) is
+ * compared against CNT. In normal operation, the L2 header begins after
+ * the PREAMBLE + SFD (CGX()_SMU()_RX_FRM_CTL[PRE_CHK] = 1) and any
+ * optional UDD skip data (CGX()_SMU()_RX_UDD_SKP[LEN]).
+ */
+union cgxx_smux_rx_decision {
+ u64 u;
+ struct cgxx_smux_rx_decision_s {
+ u64 cnt : 5;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct cgxx_smux_rx_decision_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_DECISION(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_DECISION(u64 a)
+{
+ return 0x20038 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_frm_chk
+ *
+ * CGX SMU RX Frame Check Registers The CSRs provide the enable bits for
+ * a subset of errors passed to CMR encoded.
+ */
+union cgxx_smux_rx_frm_chk {
+ u64 u;
+ struct cgxx_smux_rx_frm_chk_s {
+ u64 reserved_0_2 : 3;
+ u64 jabber : 1;
+ u64 fcserr_d : 1;
+ u64 fcserr_c : 1;
+ u64 reserved_6 : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct cgxx_smux_rx_frm_chk_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_FRM_CHK(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_FRM_CHK(u64 a)
+{
+ return 0x20028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_frm_ctl
+ *
+ * CGX SMU RX Frame Control Registers This register controls the handling
+ * of the frames. The [CTL_BCK] and [CTL_DRP] bits control how the
+ * hardware handles incoming PAUSE packets. The most common modes of
+ * operation: _ [CTL_BCK] = 1, [CTL_DRP] = 1: hardware handles everything
+ * _ [CTL_BCK] = 0, [CTL_DRP] = 0: software sees all PAUSE frames _
+ * [CTL_BCK] = 0, [CTL_DRP] = 1: all PAUSE frames are completely ignored
+ * These control bits should be set to [CTL_BCK] = 0, [CTL_DRP] = 0 in
+ * half-duplex mode. Since PAUSE packets only apply to full duplex
+ * operation, any PAUSE packet would constitute an exception which should
+ * be handled by the processing cores. PAUSE packets should not be
+ * forwarded.
+ */
+union cgxx_smux_rx_frm_ctl {
+ u64 u;
+ struct cgxx_smux_rx_frm_ctl_s {
+ u64 pre_chk : 1;
+ u64 pre_strp : 1;
+ u64 ctl_drp : 1;
+ u64 ctl_bck : 1;
+ u64 ctl_mcst : 1;
+ u64 ctl_smac : 1;
+ u64 reserved_6_11 : 6;
+ u64 ptp_mode : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct cgxx_smux_rx_frm_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_FRM_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_FRM_CTL(u64 a)
+{
+ return 0x20020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int
+ *
+ * CGX SMU Receive Interrupt Registers SMU Interrupt Register. Internal:
+ * Exception conditions \<9\> and \<4:0\> can also set the rcv/opcode in
+ * the received packet's work queue entry. CGX()_SMU()_RX_FRM_CHK
+ * provides a bit mask for configuring which conditions set the error.
+ */
+union cgxx_smux_rx_int {
+ u64 u;
+ struct cgxx_smux_rx_int_s {
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 loc_fault : 1;
+ u64 rem_fault : 1;
+ u64 bad_seq : 1;
+ u64 bad_term : 1;
+ u64 hg2fld : 1;
+ u64 hg2cc : 1;
+ u64 badver : 1;
+ u64 badrsp : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct cgxx_smux_rx_int_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT(u64 a)
+{
+ return 0x20000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int_ena_w1c
+ *
+ * CGX SMU Receive Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_int_ena_w1c {
+ u64 u;
+ struct cgxx_smux_rx_int_ena_w1c_s {
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 loc_fault : 1;
+ u64 rem_fault : 1;
+ u64 bad_seq : 1;
+ u64 bad_term : 1;
+ u64 hg2fld : 1;
+ u64 hg2cc : 1;
+ u64 badver : 1;
+ u64 badrsp : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct cgxx_smux_rx_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1C(u64 a)
+{
+ return 0x20010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int_ena_w1s
+ *
+ * CGX SMU Receive Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_int_ena_w1s {
+ u64 u;
+ struct cgxx_smux_rx_int_ena_w1s_s {
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 loc_fault : 1;
+ u64 rem_fault : 1;
+ u64 bad_seq : 1;
+ u64 bad_term : 1;
+ u64 hg2fld : 1;
+ u64 hg2cc : 1;
+ u64 badver : 1;
+ u64 badrsp : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct cgxx_smux_rx_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1S(u64 a)
+{
+ return 0x20018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int_w1s
+ *
+ * CGX SMU Receive Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union cgxx_smux_rx_int_w1s {
+ u64 u;
+ struct cgxx_smux_rx_int_w1s_s {
+ u64 jabber : 1;
+ u64 fcserr : 1;
+ u64 rcverr : 1;
+ u64 skperr : 1;
+ u64 pcterr : 1;
+ u64 rsverr : 1;
+ u64 loc_fault : 1;
+ u64 rem_fault : 1;
+ u64 bad_seq : 1;
+ u64 bad_term : 1;
+ u64 hg2fld : 1;
+ u64 hg2cc : 1;
+ u64 badver : 1;
+ u64 badrsp : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct cgxx_smux_rx_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT_W1S(u64 a)
+{
+ return 0x20008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_jabber
+ *
+ * CGX SMU Maximum Packet-Size Registers This register specifies the
+ * maximum size for packets, beyond which the SMU truncates. Internal:
+ * JABBER[CNT] is checked against the packet that arrives from SPU. The
+ * checking is performed before preamble is stripped or PTP is inserted.
+ * If present, preamble is counted as eight bytes of the incoming packet.
+ */
+union cgxx_smux_rx_jabber {
+ u64 u;
+ struct cgxx_smux_rx_jabber_s {
+ u64 cnt : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_smux_rx_jabber_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_JABBER(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_JABBER(u64 a)
+{
+ return 0x20030 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_udd_skp
+ *
+ * CGX SMU User-Defined Data Skip Registers Internal: (1) The skip bytes
+ * are part of the packet and will be sent down the NCB packet interface
+ * and will be handled by NIX. (2) The system can determine if the UDD
+ * bytes are included in the FCS check by using the FCSSEL field if the
+ * FCS check is enabled. (3) Assume that the preamble/sfd is always at
+ * the start of the frame even before UDD bytes. In most cases, there
+ * will be no preamble in these cases since it will be packet interface
+ * in direct communication to another packet interface (MAC to MAC)
+ * without a PHY involved. (4) We can still do address filtering and
+ * control packet filtering if the user desires. (5) In all cases, the
+ * UDD bytes will be sent down the packet interface as part of the
+ * packet. The UDD bytes are never stripped from the actual packet.
+ */
+union cgxx_smux_rx_udd_skp {
+ u64 u;
+ struct cgxx_smux_rx_udd_skp_s {
+ u64 len : 7;
+ u64 reserved_7 : 1;
+ u64 fcssel : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct cgxx_smux_rx_udd_skp_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_UDD_SKP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_UDD_SKP(u64 a)
+{
+ return 0x20040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_ctrl0
+ *
+ * CGX SMU RX Wake-on-LAN Control 0 Registers
+ */
+union cgxx_smux_rx_wol_ctrl0 {
+ u64 u;
+ struct cgxx_smux_rx_wol_ctrl0_s {
+ u64 dmac : 48;
+ u64 pswd_len : 4;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct cgxx_smux_rx_wol_ctrl0_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_CTRL0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_CTRL0(u64 a)
+{
+ return 0x20068 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_ctrl1
+ *
+ * CGX SMU RX Wake-on-LAN Control 1 Registers
+ */
+union cgxx_smux_rx_wol_ctrl1 {
+ u64 u;
+ struct cgxx_smux_rx_wol_ctrl1_s {
+ u64 pswd : 64;
+ } s;
+ /* struct cgxx_smux_rx_wol_ctrl1_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_CTRL1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_CTRL1(u64 a)
+{
+ return 0x20070 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int
+ *
+ * CGX SMU RX WOL Interrupt Registers These registers allow WOL
+ * interrupts to be sent to the control processor.
+ */
+union cgxx_smux_rx_wol_int {
+ u64 u;
+ struct cgxx_smux_rx_wol_int_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_smux_rx_wol_int_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT(u64 a)
+{
+ return 0x20078 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int_ena_w1c
+ *
+ * CGX SMU RX WOL Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_wol_int_ena_w1c {
+ u64 u;
+ struct cgxx_smux_rx_wol_int_ena_w1c_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_smux_rx_wol_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1C(u64 a)
+{
+ return 0x20088 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int_ena_w1s
+ *
+ * CGX SMU RX WOL Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_wol_int_ena_w1s {
+ u64 u;
+ struct cgxx_smux_rx_wol_int_ena_w1s_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_smux_rx_wol_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1S(u64 a)
+{
+ return 0x20090 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int_w1s
+ *
+ * CGX SMU RX WOL Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union cgxx_smux_rx_wol_int_w1s {
+ u64 u;
+ struct cgxx_smux_rx_wol_int_w1s_s {
+ u64 wol_rcvd : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_smux_rx_wol_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT_W1S(u64 a)
+{
+ return 0x20080 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_smac
+ *
+ * CGX SMU SMAC Registers
+ */
+union cgxx_smux_smac {
+ u64 u;
+ struct cgxx_smux_smac_s {
+ u64 smac : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_smux_smac_s cn; */
+};
+
+static inline u64 CGXX_SMUX_SMAC(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_SMAC(u64 a)
+{
+ return 0x20108 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_append
+ *
+ * CGX SMU TX Append Control Registers For more details on the
+ * interactions between FCS and PAD, see also the description of
+ * CGX()_SMU()_TX_MIN_PKT[MIN_SIZE].
+ */
+union cgxx_smux_tx_append {
+ u64 u;
+ struct cgxx_smux_tx_append_s {
+ u64 preamble : 1;
+ u64 pad : 1;
+ u64 fcs_d : 1;
+ u64 fcs_c : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_smux_tx_append_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_APPEND(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_APPEND(u64 a)
+{
+ return 0x20100 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_ctl
+ *
+ * CGX SMU Transmit Control Registers
+ */
+union cgxx_smux_tx_ctl {
+ u64 u;
+ struct cgxx_smux_tx_ctl_s {
+ u64 dic_en : 1;
+ u64 uni_en : 1;
+ u64 x4a_dis : 1;
+ u64 mia_en : 1;
+ u64 ls : 2;
+ u64 ls_byp : 1;
+ u64 l2p_bp_conv : 1;
+ u64 hg_en : 1;
+ u64 hg_pause_hgi : 2;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct cgxx_smux_tx_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_CTL(u64 a)
+{
+ return 0x20178 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_dack
+ *
+ * CGX SMU TX Drop Counters Registers
+ */
+union cgxx_smux_tx_dack {
+ u64 u;
+ struct cgxx_smux_tx_dack_s {
+ u64 dpi_sdrop_ack : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_smux_tx_dack_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_DACK(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_DACK(u64 a)
+{
+ return 0x201b0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_dcnt
+ *
+ * CGX SMU TX Drop Counters Registers
+ */
+union cgxx_smux_tx_dcnt {
+ u64 u;
+ struct cgxx_smux_tx_dcnt_s {
+ u64 dpi_sdrop_cnt : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_smux_tx_dcnt_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_DCNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_DCNT(u64 a)
+{
+ return 0x201a8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_eee
+ *
+ * INTERNAL: CGX SMU TX EEE Configure Registers Resvered. Internal:
+ * These registers control when SMU TX requests to enter or exist LPI.
+ * Those registers take effect only when EEE is supported and enabled for
+ * a given LMAC.
+ */
+union cgxx_smux_tx_eee {
+ u64 u;
+ struct cgxx_smux_tx_eee_s {
+ u64 idle_thresh : 28;
+ u64 reserved_28 : 1;
+ u64 force_lpi : 1;
+ u64 wakeup : 1;
+ u64 auto_lpi : 1;
+ u64 idle_cnt : 28;
+ u64 reserved_60_61 : 2;
+ u64 tx_lpi_wake : 1;
+ u64 tx_lpi : 1;
+ } s;
+ /* struct cgxx_smux_tx_eee_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_EEE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_EEE(u64 a)
+{
+ return 0x20190 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_eee_timer_status
+ *
+ * INTERNAL: CGX SMU TX EEE TIMER STATUS Registers Reserved. Internal:
+ * These registers configure SMU TX EEE timing parameters.
+ */
+union cgxx_smux_tx_eee_timer_status {
+ u64 u;
+ struct cgxx_smux_tx_eee_timer_status_s {
+ u64 lpi_wake_cnt : 16;
+ u64 reserved_16_30 : 15;
+ u64 wake_timer_done : 1;
+ u64 link_ok_cnt : 30;
+ u64 reserved_62 : 1;
+ u64 link_timer_done : 1;
+ } s;
+ /* struct cgxx_smux_tx_eee_timer_status_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_EEE_TIMER_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_EEE_TIMER_STATUS(u64 a)
+{
+ return 0x201a0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_eee_timing
+ *
+ * INTERNAL: CGX SMU TX EEE TIMING Parameter Registers Reserved.
+ * Internal: These registers configure SMU TX EEE timing parameters.
+ */
+union cgxx_smux_tx_eee_timing {
+ u64 u;
+ struct cgxx_smux_tx_eee_timing_s {
+ u64 w_sys_tx_min : 16;
+ u64 reserved_16_31 : 16;
+ u64 link_ok_min : 30;
+ u64 reserved_62_63 : 2;
+ } s;
+ /* struct cgxx_smux_tx_eee_timing_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_EEE_TIMING(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_EEE_TIMING(u64 a)
+{
+ return 0x20198 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_ifg
+ *
+ * CGX SMU TX Interframe-Gap Cycles Registers Programming IFG1 and IFG2:
+ * * For XAUI/RXAUI/10G/25G/40G/50G/100G systems that require IEEE 802.3
+ * compatibility, the [IFG1]+[IFG2] sum must be 12. * In loopback mode,
+ * the [IFG1]+[IFG2] of local and remote parties must match exactly;
+ * otherwise loopback FIFO will overrun: CGX()_SMU()_TX_INT[LB_OVRFLW]. *
+ * When CGX()_SMU()_TX_CTL[DIC_EN] is set, [IFG1]+[IFG2] sum must be at
+ * least 8. The behavior of smaller values is un-determined. * When
+ * CGX()_SMU()_TX_CTL[DIC_EN] is cleared, the minimum value of
+ * [IFG1]+[IFG2] is 1 for 40G/50G/100G LMAC_TYPE configurations and 5 for
+ * all other values. The behavior of smaller values is un-determined.
+ * Internal: When CGX()_SMU()_TX_CTL[DIC_EN] is set, SMU TX treats
+ * ([IFG1]+[IFG2]) \< 8 as 8 for 40G/50G/100G MACs and ([IFG1]+[IFG2]) \<
+ * 8 as 8 for other MACs. When CGX()_SMU()_TX_CTL[DIC_EN] is cleared, SMU
+ * TX can work correctly with any IFG1 and IFG2.
+ */
+union cgxx_smux_tx_ifg {
+ u64 u;
+ struct cgxx_smux_tx_ifg_s {
+ u64 ifg1 : 4;
+ u64 ifg2 : 4;
+ u64 mia_amt : 2;
+ u64 reserved_10_15 : 6;
+ u64 mia_cnt : 8;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct cgxx_smux_tx_ifg_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_IFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_IFG(u64 a)
+{
+ return 0x20160 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int
+ *
+ * CGX SMU TX Interrupt Registers
+ */
+union cgxx_smux_tx_int {
+ u64 u;
+ struct cgxx_smux_tx_int_s {
+ u64 undflw : 1;
+ u64 xchange : 1;
+ u64 fake_commit : 1;
+ u64 lb_undflw : 1;
+ u64 lb_ovrflw : 1;
+ u64 dpi_sdrop : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_smux_tx_int_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT(u64 a)
+{
+ return 0x20140 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int_ena_w1c
+ *
+ * CGX SMU TX Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_smux_tx_int_ena_w1c {
+ u64 u;
+ struct cgxx_smux_tx_int_ena_w1c_s {
+ u64 undflw : 1;
+ u64 xchange : 1;
+ u64 fake_commit : 1;
+ u64 lb_undflw : 1;
+ u64 lb_ovrflw : 1;
+ u64 dpi_sdrop : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_smux_tx_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1C(u64 a)
+{
+ return 0x20150 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int_ena_w1s
+ *
+ * CGX SMU TX Interrupt Enable Set Registers This register sets interrupt
+ * enable bits.
+ */
+union cgxx_smux_tx_int_ena_w1s {
+ u64 u;
+ struct cgxx_smux_tx_int_ena_w1s_s {
+ u64 undflw : 1;
+ u64 xchange : 1;
+ u64 fake_commit : 1;
+ u64 lb_undflw : 1;
+ u64 lb_ovrflw : 1;
+ u64 dpi_sdrop : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_smux_tx_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1S(u64 a)
+{
+ return 0x20158 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int_w1s
+ *
+ * CGX SMU TX Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_smux_tx_int_w1s {
+ u64 u;
+ struct cgxx_smux_tx_int_w1s_s {
+ u64 undflw : 1;
+ u64 xchange : 1;
+ u64 fake_commit : 1;
+ u64 lb_undflw : 1;
+ u64 lb_ovrflw : 1;
+ u64 dpi_sdrop : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_smux_tx_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT_W1S(u64 a)
+{
+ return 0x20148 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_min_pkt
+ *
+ * CGX SMU TX Minimum-Size-Packet Registers Internal: [MIN_SIZE] less
+ * than 16 will be ignored by hardware which will use 16 instead.
+ */
+union cgxx_smux_tx_min_pkt {
+ u64 u;
+ struct cgxx_smux_tx_min_pkt_s {
+ u64 min_size : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct cgxx_smux_tx_min_pkt_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_MIN_PKT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_MIN_PKT(u64 a)
+{
+ return 0x20118 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_dmac
+ *
+ * CGX SMU TX PAUSE-Packet DMAC-Field Registers This register provides
+ * the DMAC value that is placed in outbound PAUSE packets.
+ */
+union cgxx_smux_tx_pause_pkt_dmac {
+ u64 u;
+ struct cgxx_smux_tx_pause_pkt_dmac_s {
+ u64 dmac : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_smux_tx_pause_pkt_dmac_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_DMAC(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_DMAC(u64 a)
+{
+ return 0x20168 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_interval
+ *
+ * CGX SMU TX PAUSE-Packet Transmission-Interval Registers This register
+ * specifies how often PAUSE packets are sent.
+ */
+union cgxx_smux_tx_pause_pkt_interval {
+ u64 u;
+ struct cgxx_smux_tx_pause_pkt_interval_s {
+ u64 interval : 16;
+ u64 hg2_intra_interval : 16;
+ u64 hg2_intra_en : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct cgxx_smux_tx_pause_pkt_interval_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_INTERVAL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_INTERVAL(u64 a)
+{
+ return 0x20120 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_time
+ *
+ * CGX SMU TX PAUSE Packet Time Registers
+ */
+union cgxx_smux_tx_pause_pkt_time {
+ u64 u;
+ struct cgxx_smux_tx_pause_pkt_time_s {
+ u64 p_time : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_smux_tx_pause_pkt_time_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TIME(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TIME(u64 a)
+{
+ return 0x20110 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_type
+ *
+ * CGX SMU TX PAUSE-Packet P_TYPE-Field Registers This register provides
+ * the P_TYPE field that is placed in outbound PAUSE packets.
+ */
+union cgxx_smux_tx_pause_pkt_type {
+ u64 u;
+ struct cgxx_smux_tx_pause_pkt_type_s {
+ u64 p_type : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_smux_tx_pause_pkt_type_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TYPE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TYPE(u64 a)
+{
+ return 0x20170 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_togo
+ *
+ * CGX SMU TX Time-to-Backpressure Registers
+ */
+union cgxx_smux_tx_pause_togo {
+ u64 u;
+ struct cgxx_smux_tx_pause_togo_s {
+ u64 p_time : 16;
+ u64 msg_time : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_smux_tx_pause_togo_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_TOGO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_TOGO(u64 a)
+{
+ return 0x20130 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_zero
+ *
+ * CGX SMU TX PAUSE Zero Registers
+ */
+union cgxx_smux_tx_pause_zero {
+ u64 u;
+ struct cgxx_smux_tx_pause_zero_s {
+ u64 send : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_smux_tx_pause_zero_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_ZERO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_ZERO(u64 a)
+{
+ return 0x20138 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_soft_pause
+ *
+ * CGX SMU TX Soft PAUSE Registers
+ */
+union cgxx_smux_tx_soft_pause {
+ u64 u;
+ struct cgxx_smux_tx_soft_pause_s {
+ u64 p_time : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_smux_tx_soft_pause_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_SOFT_PAUSE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_SOFT_PAUSE(u64 a)
+{
+ return 0x20128 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_thresh
+ *
+ * CGX SMU TX Threshold Registers
+ */
+union cgxx_smux_tx_thresh {
+ u64 u;
+ struct cgxx_smux_tx_thresh_s {
+ u64 cnt : 12;
+ u64 reserved_12_15 : 4;
+ u64 dpi_thresh : 5;
+ u64 reserved_21_23 : 3;
+ u64 dpi_depth : 5;
+ u64 reserved_29_31 : 3;
+ u64 ecnt : 12;
+ u64 reserved_44_63 : 20;
+ } s;
+ /* struct cgxx_smux_tx_thresh_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_THRESH(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_THRESH(u64 a)
+{
+ return 0x20180 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_adv
+ *
+ * CGX SPU Autonegotiation Advertisement Registers Software programs this
+ * register with the contents of the AN-link code word base page to be
+ * transmitted during autonegotiation. (See IEEE 802.3 section 73.6 for
+ * details.) Any write operations to this register prior to completion of
+ * autonegotiation, as indicated by CGX()_SPU()_AN_STATUS[AN_COMPLETE],
+ * should be followed by a renegotiation in order for the new values to
+ * take effect. Renegotiation is initiated by setting
+ * CGX()_SPU()_AN_CONTROL[AN_RESTART]. Once autonegotiation has
+ * completed, software can examine this register along with
+ * CGX()_SPU()_AN_LP_BASE to determine the highest common denominator
+ * technology.
+ */
+union cgxx_spux_an_adv {
+ u64 u;
+ struct cgxx_spux_an_adv_s {
+ u64 s : 5;
+ u64 e : 5;
+ u64 pause : 1;
+ u64 asm_dir : 1;
+ u64 xnp_able : 1;
+ u64 rf : 1;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 t : 5;
+ u64 a1g_kx : 1;
+ u64 a10g_kx4 : 1;
+ u64 a10g_kr : 1;
+ u64 a40g_kr4 : 1;
+ u64 a40g_cr4 : 1;
+ u64 a100g_cr10 : 1;
+ u64 a100g_kp4 : 1;
+ u64 a100g_kr4 : 1;
+ u64 a100g_cr4 : 1;
+ u64 a25g_krs_crs : 1;
+ u64 a25g_kr_cr : 1;
+ u64 arsv : 12;
+ u64 a25g_rs_fec_req : 1;
+ u64 a25g_br_fec_req : 1;
+ u64 fec_able : 1;
+ u64 fec_req : 1;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_spux_an_adv_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_ADV(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_ADV(u64 a)
+{
+ return 0x10198 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_bp_status
+ *
+ * CGX SPU Autonegotiation Backplane Ethernet & BASE-R Copper Status
+ * Registers The contents of this register are updated during
+ * autonegotiation and are valid when CGX()_SPU()_AN_STATUS[AN_COMPLETE]
+ * is set. At that time, one of the port type bits will be set depending
+ * on the AN priority resolution. The port types are listed in order of
+ * decreasing priority. If a BASE-R type is negotiated then [FEC] or
+ * [RS_FEC] will be set to indicate whether/which FEC operation has been
+ * negotiated and will be clear otherwise.
+ */
+union cgxx_spux_an_bp_status {
+ u64 u;
+ struct cgxx_spux_an_bp_status_s {
+ u64 bp_an_able : 1;
+ u64 n1g_kx : 1;
+ u64 n10g_kx4 : 1;
+ u64 n10g_kr : 1;
+ u64 n25g_kr1 : 1;
+ u64 n25g_cr1 : 1;
+ u64 n25g_krs_crs : 1;
+ u64 n25g_kr_cr : 1;
+ u64 n40g_kr4 : 1;
+ u64 n40g_cr4 : 1;
+ u64 n50g_kr2 : 1;
+ u64 n50g_cr2 : 1;
+ u64 n100g_cr10 : 1;
+ u64 n100g_kp4 : 1;
+ u64 n100g_kr4 : 1;
+ u64 n100g_cr4 : 1;
+ u64 fec : 1;
+ u64 rs_fec : 1;
+ u64 reserved_18_63 : 46;
+ } s;
+ /* struct cgxx_spux_an_bp_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_BP_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_BP_STATUS(u64 a)
+{
+ return 0x101b8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_control
+ *
+ * CGX SPU Autonegotiation Control Registers
+ */
+union cgxx_spux_an_control {
+ u64 u;
+ struct cgxx_spux_an_control_s {
+ u64 reserved_0_8 : 9;
+ u64 an_restart : 1;
+ u64 reserved_10_11 : 2;
+ u64 an_en : 1;
+ u64 xnp_en : 1;
+ u64 reserved_14 : 1;
+ u64 an_reset : 1;
+ u64 an_arb_link_chk_en : 1;
+ u64 usx_an_arb_link_chk_en : 1;
+ u64 reserved_18_63 : 46;
+ } s;
+ /* struct cgxx_spux_an_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_CONTROL(u64 a)
+{
+ return 0x10188 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_lp_base
+ *
+ * CGX SPU Autonegotiation Link-Partner Base-Page Ability Registers This
+ * register captures the contents of the latest AN link code word base
+ * page received from the link partner during autonegotiation. (See IEEE
+ * 802.3 section 73.6 for details.) CGX()_SPU()_AN_STATUS[PAGE_RX] is set
+ * when this register is updated by hardware.
+ */
+union cgxx_spux_an_lp_base {
+ u64 u;
+ struct cgxx_spux_an_lp_base_s {
+ u64 s : 5;
+ u64 e : 5;
+ u64 pause : 1;
+ u64 asm_dir : 1;
+ u64 xnp_able : 1;
+ u64 rf : 1;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 t : 5;
+ u64 a1g_kx : 1;
+ u64 a10g_kx4 : 1;
+ u64 a10g_kr : 1;
+ u64 a40g_kr4 : 1;
+ u64 a40g_cr4 : 1;
+ u64 a100g_cr10 : 1;
+ u64 a100g_kp4 : 1;
+ u64 a100g_kr4 : 1;
+ u64 a100g_cr4 : 1;
+ u64 a25g_krs_crs : 1;
+ u64 a25g_kr_cr : 1;
+ u64 arsv : 12;
+ u64 a25g_rs_fec_req : 1;
+ u64 a25g_br_fec_req : 1;
+ u64 fec_able : 1;
+ u64 fec_req : 1;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_spux_an_lp_base_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_LP_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_LP_BASE(u64 a)
+{
+ return 0x101a0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_lp_xnp
+ *
+ * CGX SPU Autonegotiation Link Partner Extended Next Page Ability
+ * Registers This register captures the contents of the latest next page
+ * code word received from the link partner during autonegotiation, if
+ * any. See IEEE 802.3 section 73.7.7 for details.
+ */
+union cgxx_spux_an_lp_xnp {
+ u64 u;
+ struct cgxx_spux_an_lp_xnp_s {
+ u64 m_u : 11;
+ u64 toggle : 1;
+ u64 ack2 : 1;
+ u64 mp : 1;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 u : 32;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_spux_an_lp_xnp_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_LP_XNP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_LP_XNP(u64 a)
+{
+ return 0x101b0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_status
+ *
+ * CGX SPU Autonegotiation Status Registers
+ */
+union cgxx_spux_an_status {
+ u64 u;
+ struct cgxx_spux_an_status_s {
+ u64 lp_an_able : 1;
+ u64 reserved_1 : 1;
+ u64 link_status : 1;
+ u64 an_able : 1;
+ u64 rmt_flt : 1;
+ u64 an_complete : 1;
+ u64 page_rx : 1;
+ u64 xnp_stat : 1;
+ u64 reserved_8 : 1;
+ u64 prl_flt : 1;
+ u64 reserved_10_63 : 54;
+ } s;
+ /* struct cgxx_spux_an_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_STATUS(u64 a)
+{
+ return 0x10190 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_xnp_tx
+ *
+ * CGX SPU Autonegotiation Extended Next Page Transmit Registers Software
+ * programs this register with the contents of the AN message next page
+ * or unformatted next page link code word to be transmitted during
+ * autonegotiation. Next page exchange occurs after the base link code
+ * words have been exchanged if either end of the link segment sets the
+ * NP bit to 1, indicating that it has at least one next page to send.
+ * Once initiated, next page exchange continues until both ends of the
+ * link segment set their NP bits to 0. See IEEE 802.3 section 73.7.7 for
+ * details.
+ */
+union cgxx_spux_an_xnp_tx {
+ u64 u;
+ struct cgxx_spux_an_xnp_tx_s {
+ u64 m_u : 11;
+ u64 toggle : 1;
+ u64 ack2 : 1;
+ u64 mp : 1;
+ u64 ack : 1;
+ u64 np : 1;
+ u64 u : 32;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct cgxx_spux_an_xnp_tx_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_XNP_TX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_XNP_TX(u64 a)
+{
+ return 0x101a8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_algn_status
+ *
+ * CGX SPU Multilane BASE-R PCS Alignment-Status Registers This register
+ * implements the IEEE 802.3 multilane BASE-R PCS alignment status 1-4
+ * registers (3.50-3.53). It is valid only when the LPCS type is
+ * 40GBASE-R, 50GBASE-R, 100GBASE-R, (CGX()_CMR()_CONFIG[LMAC_TYPE] =
+ * CGX_LMAC_TYPES_E::FORTYG_R,FIFTYG_R,HUNDREDG_R), and always returns
+ * 0x0 for all other LPCS types. Service interfaces (lanes) 19-0 (100G)
+ * and 3-0 (all others) are mapped to PCS lanes 19-0 or 3-0 via
+ * CGX()_SPU()_BR_LANE_MAP()[LN_MAPPING]. For 100G, logical lane 0 fans
+ * out to service interfaces 0-4, logical lane 1 fans out to service
+ * interfaces 5-9, ... etc. For all other modes, logical lanes and
+ * service interfaces are identical. Logical interfaces (lanes) map to
+ * SerDes lanes via CGX()_CMR()_CONFIG[LANE_TO_SDS] (programmable).
+ */
+union cgxx_spux_br_algn_status {
+ u64 u;
+ struct cgxx_spux_br_algn_status_s {
+ u64 block_lock : 20;
+ u64 reserved_20_29 : 10;
+ u64 alignd : 1;
+ u64 reserved_31_40 : 10;
+ u64 marker_lock : 20;
+ u64 reserved_61_63 : 3;
+ } s;
+ /* struct cgxx_spux_br_algn_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_ALGN_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_ALGN_STATUS(u64 a)
+{
+ return 0x10050 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_lane_map#
+ *
+ * CGX SPU 40,50,100GBASE-R Lane-Mapping Registers This register
+ * implements the IEEE 802.3 lane 0-19 mapping registers (3.400-3.403).
+ * It is valid only when the LPCS type is 40GBASE-R, 50GBASE-R,
+ * 100GBASE-R, USXGMII (CGX()_CMR()_CONFIG[LMAC_TYPE]), and always
+ * returns 0x0 for all other LPCS types. The LNx_MAPPING field for each
+ * programmed PCS lane (called service interface in 802.3) is valid when
+ * that lane has achieved alignment marker lock on the receive side (i.e.
+ * the associated CGX()_SPU()_BR_ALGN_STATUS[MARKER_LOCK] = 1), and is
+ * invalid otherwise. When valid, it returns the actual detected receive
+ * PCS lane number based on the received alignment marker contents
+ * received on that service interface. In RS-FEC mode the LNx_MAPPING
+ * field is valid when that lane has achieved alignment marker lock on
+ * the receive side (i.e. the associated
+ * CGX()_SPU()_RSFEC_STATUS[AMPS_LOCK] = 1), and is invalid otherwise.
+ * When valid, it returns the actual detected receive FEC lane number
+ * based on the received alignment marker contents received on that
+ * logical lane therefore expect for RS-FEC that LNx_MAPPING = x. The
+ * mapping is flexible because IEEE 802.3 allows multilane BASE-R receive
+ * lanes to be re-ordered. Note that for the transmit side, each logical
+ * lane is mapped to a physical SerDes lane based on the programming of
+ * CGX()_CMR()_CONFIG[LANE_TO_SDS]. For the receive side,
+ * CGX()_CMR()_CONFIG[LANE_TO_SDS] specifies the logical lane to physical
+ * SerDes lane mapping, and this register specifies the service interface
+ * (or lane) to PCS lane mapping.
+ */
+union cgxx_spux_br_lane_mapx {
+ u64 u;
+ struct cgxx_spux_br_lane_mapx_s {
+ u64 ln_mapping : 6;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_spux_br_lane_mapx_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_LANE_MAPX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_LANE_MAPX(u64 a, u64 b)
+{
+ return 0x10600 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_control
+ *
+ * CGX SPU BASE-R PMD Control Registers
+ */
+union cgxx_spux_br_pmd_control {
+ u64 u;
+ struct cgxx_spux_br_pmd_control_s {
+ u64 train_restart : 1;
+ u64 train_en : 1;
+ u64 use_lane_poly : 1;
+ u64 max_wait_disable : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ struct cgxx_spux_br_pmd_control_cn96xx {
+ u64 train_restart : 1;
+ u64 train_en : 1;
+ u64 use_lane_poly : 1;
+ u64 reserved_3_63 : 61;
+ } cn96xx;
+ /* struct cgxx_spux_br_pmd_control_s cnf95xxp1; */
+ /* struct cgxx_spux_br_pmd_control_cn96xx cnf95xxp2; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_CONTROL(u64 a)
+{
+ return 0x100a8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_ld_cup
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Local Device Coefficient Update Registers
+ * This register implements MDIO register 1.154 of 802.3-2012 Section 5
+ * CL45 for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note
+ * that for 10G, 25G LN0_ only is used. It implements MDIO registers
+ * 1.1300-1.1303 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used. The
+ * fields in this register are read/write even though they are specified
+ * as read-only in 802.3. The register is automatically cleared at the
+ * start of training. When link training is in progress, each field
+ * reflects the contents of the coefficient update field in the
+ * associated lane's outgoing training frame. If
+ * CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is set, then this register
+ * must be updated by software during link training and hardware updates
+ * are disabled. If CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is clear,
+ * this register is automatically updated by hardware, and it should not
+ * be written by software. The lane fields in this register are indexed
+ * by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_ld_cup {
+ u64 u;
+ struct cgxx_spux_br_pmd_ld_cup_s {
+ u64 ln0_cup : 16;
+ u64 ln1_cup : 16;
+ u64 ln2_cup : 16;
+ u64 ln3_cup : 16;
+ } s;
+ /* struct cgxx_spux_br_pmd_ld_cup_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LD_CUP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LD_CUP(u64 a)
+{
+ return 0x100c8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_ld_rep
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Local Device Status Report Registers This
+ * register implements MDIO register 1.155 of 802.3-2012 Section 5 CL45
+ * for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note that
+ * for 10G, 25G LN0_ only is used. It implements MDIO registers
+ * 1.1400-1.1403 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used. The
+ * fields in this register are read/write even though they are specified
+ * as read-only in 802.3. The register is automatically cleared at the
+ * start of training. Each field reflects the contents of the status
+ * report field in the associated lane's outgoing training frame. If
+ * CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is set, then this register
+ * must be updated by software during link training and hardware updates
+ * are disabled. If CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is clear,
+ * this register is automatically updated by hardware, and it should not
+ * be written by software. The lane fields in this register are indexed
+ * by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_ld_rep {
+ u64 u;
+ struct cgxx_spux_br_pmd_ld_rep_s {
+ u64 ln0_rep : 16;
+ u64 ln1_rep : 16;
+ u64 ln2_rep : 16;
+ u64 ln3_rep : 16;
+ } s;
+ /* struct cgxx_spux_br_pmd_ld_rep_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LD_REP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LD_REP(u64 a)
+{
+ return 0x100d0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_lp_cup
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Link Partner Coefficient Update Registers
+ * This register implements MDIO register 1.152 of 802.3-2012 Section 5
+ * CL45 for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note
+ * that for 10G, 25G LN0_ only is used. It implements MDIO registers
+ * 1.1100-1.1103 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used. The
+ * register is automatically cleared at the start of training. Each field
+ * reflects the contents of the coefficient update field in the lane's
+ * most recently received training frame. This register should not be
+ * written when link training is enabled, i.e. when
+ * CGX()_SPU()_BR_PMD_CONTROL[TRAIN_EN] is set. The lane fields in this
+ * register are indexed by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_lp_cup {
+ u64 u;
+ struct cgxx_spux_br_pmd_lp_cup_s {
+ u64 ln0_cup : 16;
+ u64 ln1_cup : 16;
+ u64 ln2_cup : 16;
+ u64 ln3_cup : 16;
+ } s;
+ /* struct cgxx_spux_br_pmd_lp_cup_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LP_CUP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LP_CUP(u64 a)
+{
+ return 0x100b8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_lp_rep
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Link Partner Status Report Registers This
+ * register implements MDIO register 1.153 of 802.3-2012 Section 5 CL45
+ * for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note that
+ * for 10G, 25G LN0_ only is used. It implements MDIO registers
+ * 1.1200-1.1203 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used. The
+ * register is automatically cleared at the start of training. Each field
+ * reflects the contents of the coefficient update field in the lane's
+ * most recently received training frame. This register should not be
+ * written when link training is enabled, i.e. when
+ * CGX()_SPU()_BR_PMD_CONTROL[TRAIN_EN] is set. The lane fields in this
+ * register are indexed by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_lp_rep {
+ u64 u;
+ struct cgxx_spux_br_pmd_lp_rep_s {
+ u64 ln0_rep : 16;
+ u64 ln1_rep : 16;
+ u64 ln2_rep : 16;
+ u64 ln3_rep : 16;
+ } s;
+ /* struct cgxx_spux_br_pmd_lp_rep_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LP_REP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LP_REP(u64 a)
+{
+ return 0x100c0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_status
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Status Registers The lane fields in this
+ * register are indexed by logical PCS lane ID. The lane 0 field (LN0_*)
+ * is valid for 10GBASE-R, 25GBASE-R, 40GBASE-R, 50GBASE-R and
+ * 100GBASE-R. The lane 1 field (LN1_*) is valid for 40GBASE-R, 50GBASE-R
+ * and 100GBASE-R. The remaining fields (LN2_*, LN3_*) are only valid for
+ * 40GBASE-R and 100GBASE-R.
+ */
+union cgxx_spux_br_pmd_status {
+ u64 u;
+ struct cgxx_spux_br_pmd_status_s {
+ u64 ln0_train_status : 4;
+ u64 ln1_train_status : 4;
+ u64 ln2_train_status : 4;
+ u64 ln3_train_status : 4;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_br_pmd_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_STATUS(u64 a)
+{
+ return 0x100b0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_status1
+ *
+ * CGX SPU BASE-R Status 1 Registers
+ */
+union cgxx_spux_br_status1 {
+ u64 u;
+ struct cgxx_spux_br_status1_s {
+ u64 blk_lock : 1;
+ u64 hi_ber : 1;
+ u64 prbs31 : 1;
+ u64 prbs9 : 1;
+ u64 reserved_4_11 : 8;
+ u64 rcv_lnk : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct cgxx_spux_br_status1_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_STATUS1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_STATUS1(u64 a)
+{
+ return 0x10030 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_status2
+ *
+ * CGX SPU BASE-R Status 2 Registers This register implements a
+ * combination of the following IEEE 802.3 registers: * BASE-R PCS status
+ * 2 (MDIO address 3.33). * BASE-R BER high-order counter (MDIO address
+ * 3.44). * Errored-blocks high-order counter (MDIO address 3.45). Note
+ * that the relative locations of some fields have been moved from IEEE
+ * 802.3 in order to make the register layout more software friendly: the
+ * BER counter high-order and low-order bits from sections 3.44 and 3.33
+ * have been combined into the contiguous, 22-bit [BER_CNT] field;
+ * likewise, the errored-blocks counter high-order and low-order bits
+ * from section 3.45 have been combined into the contiguous, 22-bit
+ * [ERR_BLKS] field.
+ */
+union cgxx_spux_br_status2 {
+ u64 u;
+ struct cgxx_spux_br_status2_s {
+ u64 reserved_0_13 : 14;
+ u64 latched_ber : 1;
+ u64 latched_lock : 1;
+ u64 ber_cnt : 22;
+ u64 reserved_38_39 : 2;
+ u64 err_blks : 22;
+ u64 reserved_62_63 : 2;
+ } s;
+ /* struct cgxx_spux_br_status2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_STATUS2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_STATUS2(u64 a)
+{
+ return 0x10038 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_control
+ *
+ * CGX SPU BASE-R Test-Pattern Control Registers Refer to the test
+ * pattern methodology described in 802.3 sections 49.2.8 and 82.2.10.
+ */
+union cgxx_spux_br_tp_control {
+ u64 u;
+ struct cgxx_spux_br_tp_control_s {
+ u64 dp_sel : 1;
+ u64 tp_sel : 1;
+ u64 rx_tp_en : 1;
+ u64 tx_tp_en : 1;
+ u64 prbs31_tx : 1;
+ u64 prbs31_rx : 1;
+ u64 prbs9_tx : 1;
+ u64 scramble_tp : 2;
+ u64 pr_tp_data_type : 1;
+ u64 reserved_10_63 : 54;
+ } s;
+ /* struct cgxx_spux_br_tp_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_CONTROL(u64 a)
+{
+ return 0x10040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_err_cnt
+ *
+ * CGX SPU BASE-R Test-Pattern Error-Count Registers This register
+ * provides the BASE-R PCS test-pattern error counter.
+ */
+union cgxx_spux_br_tp_err_cnt {
+ u64 u;
+ struct cgxx_spux_br_tp_err_cnt_s {
+ u64 err_cnt : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_br_tp_err_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_ERR_CNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_ERR_CNT(u64 a)
+{
+ return 0x10048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_seed_a
+ *
+ * CGX SPU BASE-R Test-Pattern Seed A Registers Refer to the test pattern
+ * methodology described in 802.3 sections 49.2.8 and 82.2.10.
+ */
+union cgxx_spux_br_tp_seed_a {
+ u64 u;
+ struct cgxx_spux_br_tp_seed_a_s {
+ u64 tp_seed_a : 58;
+ u64 reserved_58_63 : 6;
+ } s;
+ /* struct cgxx_spux_br_tp_seed_a_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_SEED_A(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_SEED_A(u64 a)
+{
+ return 0x10060 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_seed_b
+ *
+ * CGX SPU BASE-R Test-Pattern Seed B Registers Refer to the test pattern
+ * methodology described in 802.3 sections 49.2.8 and 82.2.10.
+ */
+union cgxx_spux_br_tp_seed_b {
+ u64 u;
+ struct cgxx_spux_br_tp_seed_b_s {
+ u64 tp_seed_b : 58;
+ u64 reserved_58_63 : 6;
+ } s;
+ /* struct cgxx_spux_br_tp_seed_b_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_SEED_B(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_SEED_B(u64 a)
+{
+ return 0x10068 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_bx_status
+ *
+ * CGX SPU BASE-X Status Registers
+ */
+union cgxx_spux_bx_status {
+ u64 u;
+ struct cgxx_spux_bx_status_s {
+ u64 lsync : 4;
+ u64 reserved_4_10 : 7;
+ u64 pattst : 1;
+ u64 alignd : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct cgxx_spux_bx_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BX_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BX_STATUS(u64 a)
+{
+ return 0x10028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_control1
+ *
+ * CGX SPU Control 1 Registers
+ */
+union cgxx_spux_control1 {
+ u64 u;
+ struct cgxx_spux_control1_s {
+ u64 reserved_0_1 : 2;
+ u64 spd : 4;
+ u64 spdsel0 : 1;
+ u64 reserved_7_10 : 4;
+ u64 lo_pwr : 1;
+ u64 reserved_12 : 1;
+ u64 spdsel1 : 1;
+ u64 loopbck : 1;
+ u64 reset : 1;
+ u64 usxgmii_type : 3;
+ u64 usxgmii_rate : 3;
+ u64 disable_am : 1;
+ u64 reserved_23_63 : 41;
+ } s;
+ struct cgxx_spux_control1_cn96xxp1 {
+ u64 reserved_0_1 : 2;
+ u64 spd : 4;
+ u64 spdsel0 : 1;
+ u64 reserved_7_10 : 4;
+ u64 lo_pwr : 1;
+ u64 reserved_12 : 1;
+ u64 spdsel1 : 1;
+ u64 loopbck : 1;
+ u64 reset : 1;
+ u64 usxgmii_type : 3;
+ u64 usxgmii_rate : 3;
+ u64 reserved_22_63 : 42;
+ } cn96xxp1;
+ /* struct cgxx_spux_control1_s cn96xxp3; */
+ /* struct cgxx_spux_control1_cn96xxp1 cnf95xxp1; */
+ struct cgxx_spux_control1_cnf95xxp2 {
+ u64 reserved_0_1 : 2;
+ u64 spd : 4;
+ u64 spdsel0 : 1;
+ u64 reserved_7_10 : 4;
+ u64 lo_pwr : 1;
+ u64 reserved_12 : 1;
+ u64 spdsel1 : 1;
+ u64 loopbck : 1;
+ u64 reset : 1;
+ u64 usxgmii_type : 3;
+ u64 usxgmii_rate : 3;
+ u64 reserved_22 : 1;
+ u64 reserved_23_63 : 41;
+ } cnf95xxp2;
+};
+
+static inline u64 CGXX_SPUX_CONTROL1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_CONTROL1(u64 a)
+{
+ return 0x10000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_control2
+ *
+ * CGX SPU Control 2 Registers
+ */
+union cgxx_spux_control2 {
+ u64 u;
+ struct cgxx_spux_control2_s {
+ u64 pcs_type : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct cgxx_spux_control2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_CONTROL2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_CONTROL2(u64 a)
+{
+ return 0x10018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_fec_abil
+ *
+ * CGX SPU Forward Error Correction Ability Registers
+ */
+union cgxx_spux_fec_abil {
+ u64 u;
+ struct cgxx_spux_fec_abil_s {
+ u64 fec_abil : 1;
+ u64 err_abil : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct cgxx_spux_fec_abil_s cn; */
+};
+
+static inline u64 CGXX_SPUX_FEC_ABIL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_FEC_ABIL(u64 a)
+{
+ return 0x100d8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_fec_control
+ *
+ * CGX SPU Forward Error Correction Control Registers
+ */
+union cgxx_spux_fec_control {
+ u64 u;
+ struct cgxx_spux_fec_control_s {
+ u64 fec_en : 2;
+ u64 err_en : 1;
+ u64 fec_byp_ind_en : 1;
+ u64 fec_byp_cor_en : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct cgxx_spux_fec_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_FEC_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_FEC_CONTROL(u64 a)
+{
+ return 0x100e0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_fec_ln#_rsfec_err
+ *
+ * CGX SPU Reed-Solomon FEC Symbol Error Counter for FEC Lanes 0-3
+ * Registers This register is valid only when Reed-Solomon FEC is
+ * enabled. The symbol error counters are defined in 802.3 section
+ * 91.6.11 (for 100G and extended to 50G) and 802.3by-2016 section
+ * 108.6.9 (for 25G and extended to USXGMII). The counter is reset to all
+ * zeros when the register is read, and held at all ones in case of
+ * overflow. The reset operation takes precedence over the increment
+ * operation; if the register is read on the same clock cycle as an
+ * increment operation, the counter is reset to all zeros and the
+ * increment operation is lost. The counters are writable for test
+ * purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_fec_lnx_rsfec_err {
+ u64 u;
+ struct cgxx_spux_fec_lnx_rsfec_err_s {
+ u64 symb_err_cnt : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_spux_fec_lnx_rsfec_err_s cn; */
+};
+
+static inline u64 CGXX_SPUX_FEC_LNX_RSFEC_ERR(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_FEC_LNX_RSFEC_ERR(u64 a, u64 b)
+{
+ return 0x10900 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int
+ *
+ * CGX SPU Interrupt Registers
+ */
+union cgxx_spux_int {
+ u64 u;
+ struct cgxx_spux_int_s {
+ u64 rx_link_up : 1;
+ u64 rx_link_down : 1;
+ u64 err_blk : 1;
+ u64 bitlckls : 1;
+ u64 synlos : 1;
+ u64 algnlos : 1;
+ u64 dbg_sync : 1;
+ u64 bip_err : 1;
+ u64 fec_corr : 1;
+ u64 fec_uncorr : 1;
+ u64 an_page_rx : 1;
+ u64 an_link_good : 1;
+ u64 an_complete : 1;
+ u64 training_done : 1;
+ u64 training_failure : 1;
+ u64 fec_align_status : 1;
+ u64 rsfec_corr : 1;
+ u64 rsfec_uncorr : 1;
+ u64 hi_ser : 1;
+ u64 usx_an_lnk_st : 1;
+ u64 usx_an_cpt : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct cgxx_spux_int_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT(u64 a)
+{
+ return 0x10220 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int_ena_w1c
+ *
+ * CGX SPU Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_spux_int_ena_w1c {
+ u64 u;
+ struct cgxx_spux_int_ena_w1c_s {
+ u64 rx_link_up : 1;
+ u64 rx_link_down : 1;
+ u64 err_blk : 1;
+ u64 bitlckls : 1;
+ u64 synlos : 1;
+ u64 algnlos : 1;
+ u64 dbg_sync : 1;
+ u64 bip_err : 1;
+ u64 fec_corr : 1;
+ u64 fec_uncorr : 1;
+ u64 an_page_rx : 1;
+ u64 an_link_good : 1;
+ u64 an_complete : 1;
+ u64 training_done : 1;
+ u64 training_failure : 1;
+ u64 fec_align_status : 1;
+ u64 rsfec_corr : 1;
+ u64 rsfec_uncorr : 1;
+ u64 hi_ser : 1;
+ u64 usx_an_lnk_st : 1;
+ u64 usx_an_cpt : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct cgxx_spux_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT_ENA_W1C(u64 a)
+{
+ return 0x10230 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int_ena_w1s
+ *
+ * CGX SPU Interrupt Enable Set Registers This register sets interrupt
+ * enable bits.
+ */
+union cgxx_spux_int_ena_w1s {
+ u64 u;
+ struct cgxx_spux_int_ena_w1s_s {
+ u64 rx_link_up : 1;
+ u64 rx_link_down : 1;
+ u64 err_blk : 1;
+ u64 bitlckls : 1;
+ u64 synlos : 1;
+ u64 algnlos : 1;
+ u64 dbg_sync : 1;
+ u64 bip_err : 1;
+ u64 fec_corr : 1;
+ u64 fec_uncorr : 1;
+ u64 an_page_rx : 1;
+ u64 an_link_good : 1;
+ u64 an_complete : 1;
+ u64 training_done : 1;
+ u64 training_failure : 1;
+ u64 fec_align_status : 1;
+ u64 rsfec_corr : 1;
+ u64 rsfec_uncorr : 1;
+ u64 hi_ser : 1;
+ u64 usx_an_lnk_st : 1;
+ u64 usx_an_cpt : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct cgxx_spux_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT_ENA_W1S(u64 a)
+{
+ return 0x10238 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int_w1s
+ *
+ * CGX SPU Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_spux_int_w1s {
+ u64 u;
+ struct cgxx_spux_int_w1s_s {
+ u64 rx_link_up : 1;
+ u64 rx_link_down : 1;
+ u64 err_blk : 1;
+ u64 bitlckls : 1;
+ u64 synlos : 1;
+ u64 algnlos : 1;
+ u64 dbg_sync : 1;
+ u64 bip_err : 1;
+ u64 fec_corr : 1;
+ u64 fec_uncorr : 1;
+ u64 an_page_rx : 1;
+ u64 an_link_good : 1;
+ u64 an_complete : 1;
+ u64 training_done : 1;
+ u64 training_failure : 1;
+ u64 fec_align_status : 1;
+ u64 rsfec_corr : 1;
+ u64 rsfec_uncorr : 1;
+ u64 hi_ser : 1;
+ u64 usx_an_lnk_st : 1;
+ u64 usx_an_cpt : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct cgxx_spux_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT_W1S(u64 a)
+{
+ return 0x10228 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_ln#_br_bip_err_cnt
+ *
+ * CGX SPU 40,50,100GBASE-R BIP Error-Counter Registers This register
+ * implements the IEEE 802.3 BIP error-counter registers for PCS lanes
+ * 0-19 (3.200-3.203). It is valid only when the LPCS type is 40GBASE-R,
+ * 50GBASE-R, 100GBASE-R, (CGX()_CMR()_CONFIG[LMAC_TYPE]), and always
+ * returns 0x0 for all other LPCS types. The counters are indexed by the
+ * RX PCS lane number based on the alignment marker detected on each lane
+ * and captured in CGX()_SPU()_BR_LANE_MAP(). Each counter counts the BIP
+ * errors for its PCS lane, and is held at all ones in case of overflow.
+ * The counters are reset to all zeros when this register is read by
+ * software. The reset operation takes precedence over the increment
+ * operation; if the register is read on the same clock cycle as an
+ * increment operation, the counter is reset to all zeros and the
+ * increment operation is lost. The counters are writable for test
+ * purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_lnx_br_bip_err_cnt {
+ u64 u;
+ struct cgxx_spux_lnx_br_bip_err_cnt_s {
+ u64 bip_err_cnt : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_lnx_br_bip_err_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LNX_BR_BIP_ERR_CNT(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LNX_BR_BIP_ERR_CNT(u64 a, u64 b)
+{
+ return 0x10500 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_ln#_fec_corr_blks
+ *
+ * CGX SPU FEC Corrected-Blocks Counters 0-19 Registers This register is
+ * valid only when the LPCS type is BASE-R
+ * (CGX()_CMR()_CONFIG[LMAC_TYPE]) and applies to BASE-R FEC and Reed-
+ * Solomon FEC (RS-FEC). When BASE-R FEC is enabled, the FEC corrected-
+ * block counters are defined in IEEE 802.3 section 74.8.4.1. Each
+ * corrected-blocks counter increments by one for a corrected FEC block,
+ * i.e. an FEC block that has been received with invalid parity on the
+ * associated PCS lane and has been corrected by the FEC decoder. The
+ * counter is reset to all zeros when the register is read, and held at
+ * all ones in case of overflow. The reset operation takes precedence
+ * over the increment operation; if the register is read on the same
+ * clock cycle as an increment operation, the counter is reset to all
+ * zeros and the increment operation is lost. The counters are writable
+ * for test purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_lnx_fec_corr_blks {
+ u64 u;
+ struct cgxx_spux_lnx_fec_corr_blks_s {
+ u64 ln_corr_blks : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_spux_lnx_fec_corr_blks_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LNX_FEC_CORR_BLKS(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LNX_FEC_CORR_BLKS(u64 a, u64 b)
+{
+ return 0x10700 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_ln#_fec_uncorr_blks
+ *
+ * CGX SPU FEC Uncorrected-Blocks Counters 0-19 Registers This register
+ * is valid only when the LPCS type is BASE-R
+ * (CGX()_CMR()_CONFIG[LMAC_TYPE]) and applies to BASE-R FEC and Reed-
+ * Solomon FEC (RS-FEC). When BASE-R FEC is enabled, the FEC corrected-
+ * block counters are defined in IEEE 802.3 section 74.8.4.2. Each
+ * uncorrected-blocks counter increments by one for an uncorrected FEC
+ * block, i.e. an FEC block that has been received with invalid parity on
+ * the associated PCS lane and has not been corrected by the FEC decoder.
+ * The counter is reset to all zeros when the register is read, and held
+ * at all ones in case of overflow. The reset operation takes precedence
+ * over the increment operation; if the register is read on the same
+ * clock cycle as an increment operation, the counter is reset to all
+ * zeros and the increment operation is lost. The counters are writable
+ * for test purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_lnx_fec_uncorr_blks {
+ u64 u;
+ struct cgxx_spux_lnx_fec_uncorr_blks_s {
+ u64 ln_uncorr_blks : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_spux_lnx_fec_uncorr_blks_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LNX_FEC_UNCORR_BLKS(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LNX_FEC_UNCORR_BLKS(u64 a, u64 b)
+{
+ return 0x10800 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_lpcs_states
+ *
+ * CGX SPU BASE-X Transmit/Receive States Registers
+ */
+union cgxx_spux_lpcs_states {
+ u64 u;
+ struct cgxx_spux_lpcs_states_s {
+ u64 deskew_sm : 3;
+ u64 reserved_3 : 1;
+ u64 deskew_am_found : 20;
+ u64 bx_rx_sm : 2;
+ u64 reserved_26_27 : 2;
+ u64 br_rx_sm : 3;
+ u64 reserved_31_63 : 33;
+ } s;
+ /* struct cgxx_spux_lpcs_states_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LPCS_STATES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LPCS_STATES(u64 a)
+{
+ return 0x10208 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_misc_control
+ *
+ * CGX SPU Miscellaneous Control Registers "* RX logical PCS lane
+ * polarity vector \<3:0\> = [XOR_RXPLRT]\<3:0\> ^ {4{[RXPLRT]}}. * TX
+ * logical PCS lane polarity vector \<3:0\> = [XOR_TXPLRT]\<3:0\> ^
+ * {4{[TXPLRT]}}. In short, keep [RXPLRT] and [TXPLRT] cleared, and use
+ * [XOR_RXPLRT] and [XOR_TXPLRT] fields to define the polarity per
+ * logical PCS lane. Only bit 0 of vector is used for 10GBASE-R, and only
+ * bits 1:0 of vector are used for RXAUI."
+ */
+union cgxx_spux_misc_control {
+ u64 u;
+ struct cgxx_spux_misc_control_s {
+ u64 txplrt : 1;
+ u64 rxplrt : 1;
+ u64 xor_txplrt : 4;
+ u64 xor_rxplrt : 4;
+ u64 intlv_rdisp : 1;
+ u64 skip_after_term : 1;
+ u64 rx_packet_dis : 1;
+ u64 rx_edet_signal_ok : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct cgxx_spux_misc_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_MISC_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_MISC_CONTROL(u64 a)
+{
+ return 0x10218 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rsfec_corr
+ *
+ * CGX SPU Reed-Solomon FEC Corrected Codeword Counter Register This
+ * register implements the IEEE 802.3 RS-FEC corrected codewords counter
+ * described in 802.3 section 91.6.8 (for 100G and extended to 50G) and
+ * 802.3by-2016 section 108.6.7 (for 25G and extended to USXGMII).
+ */
+union cgxx_spux_rsfec_corr {
+ u64 u;
+ struct cgxx_spux_rsfec_corr_s {
+ u64 cw_cnt : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_spux_rsfec_corr_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RSFEC_CORR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RSFEC_CORR(u64 a)
+{
+ return 0x10088 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rsfec_status
+ *
+ * CGX SPU Reed-Solomon FEC Status Registers This register implements the
+ * IEEE 802.3 RS-FEC status and lane mapping registers as described in
+ * 802.3 section 91.6 (for 100G and extended to 50G) and 802.3by-2016
+ * section 108-6 (for 25G and extended to USXGMII).
+ */
+union cgxx_spux_rsfec_status {
+ u64 u;
+ struct cgxx_spux_rsfec_status_s {
+ u64 fec_lane_mapping : 8;
+ u64 fec_align_status : 1;
+ u64 amps_lock : 4;
+ u64 hi_ser : 1;
+ u64 fec_byp_ind_abil : 1;
+ u64 fec_byp_cor_abil : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_rsfec_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RSFEC_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RSFEC_STATUS(u64 a)
+{
+ return 0x10080 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rsfec_uncorr
+ *
+ * CGX SPU Reed-Solomon FEC Uncorrected Codeword Counter Register This
+ * register implements the IEEE 802.3 RS-FEC uncorrected codewords
+ * counter described in 802.3 section 91.6.9 (for 100G and extended to
+ * 50G) and 802.3by-2016 section 108.6.8 (for 25G and extended to
+ * USXGMII).
+ */
+union cgxx_spux_rsfec_uncorr {
+ u64 u;
+ struct cgxx_spux_rsfec_uncorr_s {
+ u64 cw_cnt : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_spux_rsfec_uncorr_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RSFEC_UNCORR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RSFEC_UNCORR(u64 a)
+{
+ return 0x10090 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_eee_wake
+ *
+ * INTERNAL: CGX SPU RX EEE Wake Error Counter Registers Reserved.
+ * Internal: A counter that is incremented each time that the LPI receive
+ * state diagram enters the RX_WTF state indicating that a wake time
+ * fault has been detected.
+ */
+union cgxx_spux_rx_eee_wake {
+ u64 u;
+ struct cgxx_spux_rx_eee_wake_s {
+ u64 wtf_error_counter : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_rx_eee_wake_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_EEE_WAKE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_EEE_WAKE(u64 a)
+{
+ return 0x103e0 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_lpi_timing
+ *
+ * INTERNAL: CGX SPU RX EEE LPI Timing Parameters Registers Reserved.
+ * Internal: This register specifies receiver LPI timing parameters Tqr,
+ * Twr and Twtf.
+ */
+union cgxx_spux_rx_lpi_timing {
+ u64 u;
+ struct cgxx_spux_rx_lpi_timing_s {
+ u64 twtf : 20;
+ u64 twr : 20;
+ u64 tqr : 20;
+ u64 reserved_60_61 : 2;
+ u64 rx_lpi_fw : 1;
+ u64 rx_lpi_en : 1;
+ } s;
+ /* struct cgxx_spux_rx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_LPI_TIMING(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_LPI_TIMING(u64 a)
+{
+ return 0x103c0 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_lpi_timing2
+ *
+ * INTERNAL: CGX SPU RX EEE LPI Timing2 Parameters Registers Reserved.
+ * Internal: This register specifies receiver LPI timing parameters
+ * hold_off_timer.
+ */
+union cgxx_spux_rx_lpi_timing2 {
+ u64 u;
+ struct cgxx_spux_rx_lpi_timing2_s {
+ u64 hold_off_timer : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct cgxx_spux_rx_lpi_timing2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_LPI_TIMING2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_LPI_TIMING2(u64 a)
+{
+ return 0x10420 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_mrk_cnt
+ *
+ * CGX SPU Receiver Marker Interval Count Control Registers
+ */
+union cgxx_spux_rx_mrk_cnt {
+ u64 u;
+ struct cgxx_spux_rx_mrk_cnt_s {
+ u64 mrk_cnt : 20;
+ u64 reserved_20_43 : 24;
+ u64 by_mrk_100g : 1;
+ u64 reserved_45_47 : 3;
+ u64 ram_mrk_cnt : 8;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct cgxx_spux_rx_mrk_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_MRK_CNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_MRK_CNT(u64 a)
+{
+ return 0x103a0 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_spd_abil
+ *
+ * CGX SPU PCS Speed Ability Registers
+ */
+union cgxx_spux_spd_abil {
+ u64 u;
+ struct cgxx_spux_spd_abil_s {
+ u64 tengb : 1;
+ u64 tenpasst : 1;
+ u64 usxgmii : 1;
+ u64 twentyfivegb : 1;
+ u64 fortygb : 1;
+ u64 fiftygb : 1;
+ u64 hundredgb : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct cgxx_spux_spd_abil_s cn; */
+};
+
+static inline u64 CGXX_SPUX_SPD_ABIL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_SPD_ABIL(u64 a)
+{
+ return 0x10010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_status1
+ *
+ * CGX SPU Status 1 Registers
+ */
+union cgxx_spux_status1 {
+ u64 u;
+ struct cgxx_spux_status1_s {
+ u64 reserved_0 : 1;
+ u64 lpable : 1;
+ u64 rcv_lnk : 1;
+ u64 reserved_3_6 : 4;
+ u64 flt : 1;
+ u64 rx_lpi_indication : 1;
+ u64 tx_lpi_indication : 1;
+ u64 rx_lpi_received : 1;
+ u64 tx_lpi_received : 1;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct cgxx_spux_status1_s cn; */
+};
+
+static inline u64 CGXX_SPUX_STATUS1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_STATUS1(u64 a)
+{
+ return 0x10008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_status2
+ *
+ * CGX SPU Status 2 Registers
+ */
+union cgxx_spux_status2 {
+ u64 u;
+ struct cgxx_spux_status2_s {
+ u64 tengb_r : 1;
+ u64 tengb_x : 1;
+ u64 tengb_w : 1;
+ u64 tengb_t : 1;
+ u64 usxgmii_r : 1;
+ u64 twentyfivegb_r : 1;
+ u64 fortygb_r : 1;
+ u64 fiftygb_r : 1;
+ u64 hundredgb_r : 1;
+ u64 reserved_9 : 1;
+ u64 rcvflt : 1;
+ u64 xmtflt : 1;
+ u64 reserved_12_13 : 2;
+ u64 dev : 2;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_status2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_STATUS2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_STATUS2(u64 a)
+{
+ return 0x10020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_tx_lpi_timing
+ *
+ * INTERNAL: CGX SPU TX EEE LPI Timing Parameters Registers Reserved.
+ * Internal: Transmit LPI timing parameters Tsl, Tql and Tul
+ */
+union cgxx_spux_tx_lpi_timing {
+ u64 u;
+ struct cgxx_spux_tx_lpi_timing_s {
+ u64 tql : 19;
+ u64 reserved_19_31 : 13;
+ u64 tul : 12;
+ u64 reserved_44_47 : 4;
+ u64 tsl : 12;
+ u64 reserved_60 : 1;
+ u64 tx_lpi_ignore_twl : 1;
+ u64 tx_lpi_fw : 1;
+ u64 tx_lpi_en : 1;
+ } s;
+ /* struct cgxx_spux_tx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_SPUX_TX_LPI_TIMING(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_TX_LPI_TIMING(u64 a)
+{
+ return 0x10400 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_tx_lpi_timing2
+ *
+ * INTERNAL: CGX SPU TX EEE LPI Timing2 Parameters Registers Reserved.
+ * Internal: This register specifies transmit LPI timer parameters.
+ */
+union cgxx_spux_tx_lpi_timing2 {
+ u64 u;
+ struct cgxx_spux_tx_lpi_timing2_s {
+ u64 t1u : 8;
+ u64 reserved_8_11 : 4;
+ u64 twl : 12;
+ u64 reserved_24_31 : 8;
+ u64 twl2 : 12;
+ u64 reserved_44_47 : 4;
+ u64 tbyp : 12;
+ u64 reserved_60_63 : 4;
+ } s;
+ /* struct cgxx_spux_tx_lpi_timing2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_TX_LPI_TIMING2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_TX_LPI_TIMING2(u64 a)
+{
+ return 0x10440 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_tx_mrk_cnt
+ *
+ * CGX SPU Transmitter Marker Interval Count Control Registers
+ */
+union cgxx_spux_tx_mrk_cnt {
+ u64 u;
+ struct cgxx_spux_tx_mrk_cnt_s {
+ u64 mrk_cnt : 20;
+ u64 reserved_20_43 : 24;
+ u64 by_mrk_100g : 1;
+ u64 reserved_45_47 : 3;
+ u64 ram_mrk_cnt : 8;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct cgxx_spux_tx_mrk_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_TX_MRK_CNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_TX_MRK_CNT(u64 a)
+{
+ return 0x10380 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_adv
+ *
+ * CGX SPU USXGMII Autonegotiation Advertisement Registers Software
+ * programs this register with the contents of the AN-link code word base
+ * page to be transmitted during autonegotiation. Any write operations to
+ * this register prior to completion of autonegotiation should be
+ * followed by a renegotiation in order for the new values to take
+ * effect. Once autonegotiation has completed, software can examine this
+ * register along with CGX()_SPU()_USX_AN_ADV to determine the highest
+ * common denominator technology. The format for this register is from
+ * USXGMII Multiport specification section 1.1.2 Table 2.
+ */
+union cgxx_spux_usx_an_adv {
+ u64 u;
+ struct cgxx_spux_usx_an_adv_s {
+ u64 set : 1;
+ u64 reserved_1_6 : 6;
+ u64 eee_clk_stop_abil : 1;
+ u64 eee_abil : 1;
+ u64 spd : 3;
+ u64 dplx : 1;
+ u64 reserved_13_14 : 2;
+ u64 lnk_st : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_usx_an_adv_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_ADV(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_ADV(u64 a)
+{
+ return 0x101d0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_control
+ *
+ * CGX SPU USXGMII Autonegotiation Control Register
+ */
+union cgxx_spux_usx_an_control {
+ u64 u;
+ struct cgxx_spux_usx_an_control_s {
+ u64 reserved_0_8 : 9;
+ u64 rst_an : 1;
+ u64 reserved_10_11 : 2;
+ u64 an_en : 1;
+ u64 reserved_13_14 : 2;
+ u64 an_reset : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_usx_an_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_CONTROL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_CONTROL(u64 a)
+{
+ return 0x101c0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_expansion
+ *
+ * CGX SPU USXGMII Autonegotiation Expansion Register This register is
+ * only used to signal page reception.
+ */
+union cgxx_spux_usx_an_expansion {
+ u64 u;
+ struct cgxx_spux_usx_an_expansion_s {
+ u64 reserved_0 : 1;
+ u64 an_page_received : 1;
+ u64 next_page_able : 1;
+ u64 reserved_3_63 : 61;
+ } s;
+ /* struct cgxx_spux_usx_an_expansion_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_EXPANSION(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_EXPANSION(u64 a)
+{
+ return 0x101e0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_flow_ctrl
+ *
+ * CGX SPU USXGMII Flow Control Registers This register is used by
+ * software to affect USXGMII AN hardware behavior.
+ */
+union cgxx_spux_usx_an_flow_ctrl {
+ u64 u;
+ struct cgxx_spux_usx_an_flow_ctrl_s {
+ u64 start_idle_detect : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct cgxx_spux_usx_an_flow_ctrl_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_FLOW_CTRL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_FLOW_CTRL(u64 a)
+{
+ return 0x101e8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_link_timer
+ *
+ * CGX SPU USXGMII Link Timer Registers This is the link timer register.
+ */
+union cgxx_spux_usx_an_link_timer {
+ u64 u;
+ struct cgxx_spux_usx_an_link_timer_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_usx_an_link_timer_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_LINK_TIMER(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_LINK_TIMER(u64 a)
+{
+ return 0x101f0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_lp_abil
+ *
+ * CGX SPU USXGMII Autonegotiation Link-Partner Advertisement Registers
+ * This register captures the contents of the latest AN link code word
+ * base page received from the link partner during autonegotiation. This
+ * is register 5 per IEEE 802.3, Clause 37.
+ * CGX()_SPU()_USX_AN_EXPANSION[AN_PAGE_RECEIVED] is set when this
+ * register is updated by hardware.
+ */
+union cgxx_spux_usx_an_lp_abil {
+ u64 u;
+ struct cgxx_spux_usx_an_lp_abil_s {
+ u64 set : 1;
+ u64 reserved_1_6 : 6;
+ u64 eee_clk_stop_abil : 1;
+ u64 eee_abil : 1;
+ u64 spd : 3;
+ u64 dplx : 1;
+ u64 reserved_13_14 : 2;
+ u64 lnk_st : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct cgxx_spux_usx_an_lp_abil_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_LP_ABIL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_LP_ABIL(u64 a)
+{
+ return 0x101d8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_status
+ *
+ * CGX SPU USXGMII Autonegotiation Status Register
+ */
+union cgxx_spux_usx_an_status {
+ u64 u;
+ struct cgxx_spux_usx_an_status_s {
+ u64 extnd : 1;
+ u64 reserved_1 : 1;
+ u64 lnk_st : 1;
+ u64 an_abil : 1;
+ u64 rmt_flt : 1;
+ u64 an_cpt : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_spux_usx_an_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_STATUS(u64 a)
+{
+ return 0x101c8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu_dbg_control
+ *
+ * CGX SPU Debug Control Registers
+ */
+union cgxx_spu_dbg_control {
+ u64 u;
+ struct cgxx_spu_dbg_control_s {
+ u64 marker_rxp : 15;
+ u64 reserved_15 : 1;
+ u64 scramble_dis : 1;
+ u64 reserved_17_18 : 2;
+ u64 br_pmd_train_soft_en : 1;
+ u64 reserved_20_27 : 8;
+ u64 timestamp_norm_dis : 1;
+ u64 an_nonce_match_dis : 1;
+ u64 br_ber_mon_dis : 1;
+ u64 rf_cw_mon_erly_restart_dis : 1;
+ u64 us_clk_period : 12;
+ u64 ms_clk_period : 12;
+ u64 reserved_56_63 : 8;
+ } s;
+ struct cgxx_spu_dbg_control_cn96xxp1 {
+ u64 marker_rxp : 15;
+ u64 reserved_15 : 1;
+ u64 scramble_dis : 1;
+ u64 reserved_17_18 : 2;
+ u64 br_pmd_train_soft_en : 1;
+ u64 reserved_20_27 : 8;
+ u64 timestamp_norm_dis : 1;
+ u64 an_nonce_match_dis : 1;
+ u64 br_ber_mon_dis : 1;
+ u64 reserved_31 : 1;
+ u64 us_clk_period : 12;
+ u64 ms_clk_period : 12;
+ u64 reserved_56_63 : 8;
+ } cn96xxp1;
+ /* struct cgxx_spu_dbg_control_s cn96xxp3; */
+ /* struct cgxx_spu_dbg_control_cn96xxp1 cnf95xxp1; */
+ /* struct cgxx_spu_dbg_control_s cnf95xxp2; */
+};
+
+static inline u64 CGXX_SPU_DBG_CONTROL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_DBG_CONTROL(void)
+{
+ return 0x10300;
+}
+
+/**
+ * Register (RSL) cgx#_spu_sds#_skew_status
+ *
+ * CGX SPU SerDes Lane Skew Status Registers This register provides
+ * SerDes lane skew status. One register per physical SerDes lane.
+ */
+union cgxx_spu_sdsx_skew_status {
+ u64 u;
+ struct cgxx_spu_sdsx_skew_status_s {
+ u64 skew_status : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct cgxx_spu_sdsx_skew_status_s cn; */
+};
+
+static inline u64 CGXX_SPU_SDSX_SKEW_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_SDSX_SKEW_STATUS(u64 a)
+{
+ return 0x10340 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu_sds#_states
+ *
+ * CGX SPU SerDes States Registers This register provides SerDes lane
+ * states. One register per physical SerDes lane.
+ */
+union cgxx_spu_sdsx_states {
+ u64 u;
+ struct cgxx_spu_sdsx_states_s {
+ u64 bx_sync_sm : 4;
+ u64 br_sh_cnt : 11;
+ u64 br_block_lock : 1;
+ u64 br_sh_invld_cnt : 7;
+ u64 reserved_23 : 1;
+ u64 fec_sync_cnt : 4;
+ u64 fec_block_sync : 1;
+ u64 reserved_29 : 1;
+ u64 an_rx_sm : 2;
+ u64 an_arb_sm : 3;
+ u64 reserved_35 : 1;
+ u64 train_lock_bad_markers : 3;
+ u64 train_lock_found_1st_marker : 1;
+ u64 train_frame_lock : 1;
+ u64 train_code_viol : 1;
+ u64 train_sm : 3;
+ u64 reserved_45_47 : 3;
+ u64 am_lock_sm : 2;
+ u64 am_lock_invld_cnt : 2;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct cgxx_spu_sdsx_states_s cn; */
+};
+
+static inline u64 CGXX_SPU_SDSX_STATES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_SDSX_STATES(u64 a)
+{
+ return 0x10360 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu_usxgmii_control
+ *
+ * CGX SPU Common USXGMII Control Register This register is the common
+ * control register that enables USXGMII Mode. The fields in this
+ * register are preserved across any LMAC soft-resets. For an LMAC in
+ * soft- reset state in USXGMII mode, the CGX will transmit Remote Fault
+ * BASE-R blocks.
+ */
+union cgxx_spu_usxgmii_control {
+ u64 u;
+ struct cgxx_spu_usxgmii_control_s {
+ u64 enable : 1;
+ u64 usxgmii_type : 3;
+ u64 sds_id : 2;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct cgxx_spu_usxgmii_control_s cn; */
+};
+
+static inline u64 CGXX_SPU_USXGMII_CONTROL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_USXGMII_CONTROL(void)
+{
+ return 0x10920;
+}
+
+#endif /* __CSRS_CGX_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_LMT_H__
+#define __CSRS_LMT_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * LMT.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Register (RVU_PFVF_BAR2) lmt_lf_lmtcancel
+ *
+ * RVU VF LMT Cancel Register
+ */
+union lmt_lf_lmtcancel {
+ u64 u;
+ struct lmt_lf_lmtcancel_s {
+ u64 data : 64;
+ } s;
+ /* struct lmt_lf_lmtcancel_s cn; */
+};
+
+static inline u64 LMT_LF_LMTCANCEL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 LMT_LF_LMTCANCEL(void)
+{
+ return 0x400;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) lmt_lf_lmtline#
+ *
+ * RVU VF LMT Line Registers
+ */
+union lmt_lf_lmtlinex {
+ u64 u;
+ struct lmt_lf_lmtlinex_s {
+ u64 data : 64;
+ } s;
+ /* struct lmt_lf_lmtlinex_s cn; */
+};
+
+static inline u64 LMT_LF_LMTLINEX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 LMT_LF_LMTLINEX(u64 a)
+{
+ return 0 + 8 * a;
+}
+
+#endif /* __CSRS_LMT_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_MIO_EMM_H__
+#define __CSRS_MIO_EMM_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * MIO_EMM.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration mio_emm_bar_e
+ *
+ * eMMC Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8_SIZE 0x800000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9_SIZE 0x10000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4 (0x87e009f00000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration mio_emm_int_vec_e
+ *
+ * eMMC MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define MIO_EMM_INT_VEC_E_DMA_INT_DONE (8)
+#define MIO_EMM_INT_VEC_E_DMA_INT_FIFO (7)
+#define MIO_EMM_INT_VEC_E_EMM_BUF_DONE (0)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_DONE (1)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_ERR (3)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_DONE (2)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_ERR (4)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_DONE (5)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_ERR (6)
+#define MIO_EMM_INT_VEC_E_NCB_FLT (9)
+#define MIO_EMM_INT_VEC_E_NCB_RAS (0xa)
+
+/**
+ * Register (RSL) mio_emm_access_wdog
+ *
+ * eMMC Access Watchdog Register
+ */
+union mio_emm_access_wdog {
+ u64 u;
+ struct mio_emm_access_wdog_s {
+ u64 clk_cnt : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct mio_emm_access_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+{
+ return 0x20f0;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_dat
+ *
+ * eMMC Data Buffer Access Register
+ */
+union mio_emm_buf_dat {
+ u64 u;
+ struct mio_emm_buf_dat_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_buf_dat_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_DAT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_DAT(void)
+{
+ return 0x20e8;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_idx
+ *
+ * eMMC Data Buffer Address Register
+ */
+union mio_emm_buf_idx {
+ u64 u;
+ struct mio_emm_buf_idx_s {
+ u64 offset : 6;
+ u64 buf_num : 1;
+ u64 reserved_7_15 : 9;
+ u64 inc : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct mio_emm_buf_idx_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_IDX(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_IDX(void)
+{
+ return 0x20e0;
+}
+
+/**
+ * Register (RSL) mio_emm_calb
+ *
+ * eMMC Calbration Register This register initiates delay line
+ * characterization.
+ */
+union mio_emm_calb {
+ u64 u;
+ struct mio_emm_calb_s {
+ u64 start : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct mio_emm_calb_s cn; */
+};
+
+static inline u64 MIO_EMM_CALB(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CALB(void)
+{
+ return 0x20c0;
+}
+
+/**
+ * Register (RSL) mio_emm_cfg
+ *
+ * eMMC Configuration Register
+ */
+union mio_emm_cfg {
+ u64 u;
+ struct mio_emm_cfg_s {
+ u64 bus_ena : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct mio_emm_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CFG(void)
+{
+ return 0x2000;
+}
+
+/**
+ * Register (RSL) mio_emm_cmd
+ *
+ * eMMC Command Register
+ */
+union mio_emm_cmd {
+ u64 u;
+ struct mio_emm_cmd_s {
+ u64 arg : 32;
+ u64 cmd_idx : 6;
+ u64 rtype_xor : 3;
+ u64 ctype_xor : 2;
+ u64 reserved_43_48 : 6;
+ u64 offset : 6;
+ u64 dbuf : 1;
+ u64 reserved_56_58 : 3;
+ u64 cmd_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct mio_emm_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_CMD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CMD(void)
+{
+ return 0x2058;
+}
+
+/**
+ * Register (RSL) mio_emm_comp
+ *
+ * eMMC Compensation Register
+ */
+union mio_emm_comp {
+ u64 u;
+ struct mio_emm_comp_s {
+ u64 nctl : 3;
+ u64 reserved_3_7 : 5;
+ u64 pctl : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct mio_emm_comp_s cn; */
+};
+
+static inline u64 MIO_EMM_COMP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_COMP(void)
+{
+ return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_debug
+ *
+ * eMMC Debug Register
+ */
+union mio_emm_debug {
+ u64 u;
+ struct mio_emm_debug_s {
+ u64 clk_on : 1;
+ u64 reserved_1_7 : 7;
+ u64 cmd_sm : 4;
+ u64 data_sm : 4;
+ u64 dma_sm : 4;
+ u64 emmc_clk_disable : 1;
+ u64 rdsync_rst : 1;
+ u64 reserved_22_63 : 42;
+ } s;
+ struct mio_emm_debug_cn96xxp1 {
+ u64 clk_on : 1;
+ u64 reserved_1_7 : 7;
+ u64 cmd_sm : 4;
+ u64 data_sm : 4;
+ u64 dma_sm : 4;
+ u64 reserved_20_63 : 44;
+ } cn96xxp1;
+ /* struct mio_emm_debug_s cn96xxp3; */
+ /* struct mio_emm_debug_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 MIO_EMM_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DEBUG(void)
+{
+ return 0x20f8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma
+ *
+ * eMMC External DMA Configuration Register
+ */
+union mio_emm_dma {
+ u64 u;
+ struct mio_emm_dma_s {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 rel_wr : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 extra_args : 1;
+ } s;
+ struct mio_emm_dma_cn8 {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 rel_wr : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 reserved_63 : 1;
+ } cn8;
+ struct mio_emm_dma_cn9 {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 reserved_50 : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 extra_args : 1;
+ } cn9;
+};
+
+static inline u64 MIO_EMM_DMA(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA(void)
+{
+ return 0x2050;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_adr
+ *
+ * eMMC DMA Address Register This register sets the address for eMMC/SD
+ * flash transfers to/from memory. Sixty-four-bit operations must be used
+ * to access this register. This register is updated by the DMA hardware
+ * and can be reloaded by the values placed in the MIO_EMM_DMA_FIFO_ADR.
+ */
+union mio_emm_dma_adr {
+ u64 u;
+ struct mio_emm_dma_adr_s {
+ u64 adr : 53;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_dma_adr_cn8 {
+ u64 adr : 49;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_dma_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ADR(void)
+{
+ return 0x188;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_arg
+ *
+ * eMMC External DMA Extra Arguments Register
+ */
+union mio_emm_dma_arg {
+ u64 u;
+ struct mio_emm_dma_arg_s {
+ u64 cmd23_args : 8;
+ u64 force_pgm : 1;
+ u64 context_id : 4;
+ u64 tag_req : 1;
+ u64 pack_cmd : 1;
+ u64 rel_wr : 1;
+ u64 alt_cmd : 6;
+ u64 skip_blk_cmd : 1;
+ u64 reserved_23_31 : 9;
+ u64 alt_cmd_arg : 32;
+ } s;
+ /* struct mio_emm_dma_arg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_ARG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ARG(void)
+{
+ return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_cfg
+ *
+ * eMMC DMA Configuration Register This register controls the internal
+ * DMA engine used with the eMMC/SD flash controller. Sixty- four-bit
+ * operations must be used to access this register. This register is
+ * updated by the hardware DMA engine and can also be reloaded by writes
+ * to the MIO_EMM_DMA_FIFO_CMD register.
+ */
+union mio_emm_dma_cfg {
+ u64 u;
+ struct mio_emm_dma_cfg_s {
+ u64 reserved_0_35 : 36;
+ u64 size : 20;
+ u64 endian : 1;
+ u64 swap8 : 1;
+ u64 swap16 : 1;
+ u64 swap32 : 1;
+ u64 reserved_60 : 1;
+ u64 clr : 1;
+ u64 rw : 1;
+ u64 en : 1;
+ } s;
+ /* struct mio_emm_dma_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_CFG(void)
+{
+ return 0x180;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_adr
+ *
+ * eMMC Internal DMA FIFO Address Register This register specifies the
+ * internal address that is loaded into the eMMC internal DMA FIFO. The
+ * FIFO is used to queue up operations for the
+ * MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR when the DMA completes successfully.
+ */
+union mio_emm_dma_fifo_adr {
+ u64 u;
+ struct mio_emm_dma_fifo_adr_s {
+ u64 reserved_0_2 : 3;
+ u64 adr : 50;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_dma_fifo_adr_cn8 {
+ u64 reserved_0_2 : 3;
+ u64 adr : 46;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_dma_fifo_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+{
+ return 0x170;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cfg
+ *
+ * eMMC Internal DMA FIFO Configuration Register This register controls
+ * DMA FIFO operations.
+ */
+union mio_emm_dma_fifo_cfg {
+ u64 u;
+ struct mio_emm_dma_fifo_cfg_s {
+ u64 count : 5;
+ u64 reserved_5_7 : 3;
+ u64 int_lvl : 5;
+ u64 reserved_13_15 : 3;
+ u64 clr : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct mio_emm_dma_fifo_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+{
+ return 0x160;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cmd
+ *
+ * eMMC Internal DMA FIFO Command Register This register specifies a
+ * command that is loaded into the eMMC internal DMA FIFO. The FIFO is
+ * used to queue up operations for the MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR
+ * when the DMA completes successfully. Writes to this register store
+ * both the MIO_EMM_DMA_FIFO_CMD and the MIO_EMM_DMA_FIFO_ADR contents
+ * into the FIFO and increment the MIO_EMM_DMA_FIFO_CFG[COUNT] field.
+ * Note: This register has a similar format to MIO_EMM_DMA_CFG with the
+ * exception that the EN and CLR fields are absent. These are supported
+ * in MIO_EMM_DMA_FIFO_CFG.
+ */
+union mio_emm_dma_fifo_cmd {
+ u64 u;
+ struct mio_emm_dma_fifo_cmd_s {
+ u64 reserved_0_35 : 36;
+ u64 size : 20;
+ u64 endian : 1;
+ u64 swap8 : 1;
+ u64 swap16 : 1;
+ u64 swap32 : 1;
+ u64 intdis : 1;
+ u64 reserved_61 : 1;
+ u64 rw : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct mio_emm_dma_fifo_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+{
+ return 0x178;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int
+ *
+ * eMMC DMA Interrupt Register Sixty-four-bit operations must be used to
+ * access this register.
+ */
+union mio_emm_dma_int {
+ u64 u;
+ struct mio_emm_dma_int_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT(void)
+{
+ return 0x190;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1c
+ *
+ * eMMC DMA Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union mio_emm_dma_int_ena_w1c {
+ u64 u;
+ struct mio_emm_dma_int_ena_w1c_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_ena_w1c_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+{
+ return 0x1a8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1s
+ *
+ * eMMC DMA Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union mio_emm_dma_int_ena_w1s {
+ u64 u;
+ struct mio_emm_dma_int_ena_w1s_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_ena_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+{
+ return 0x1a0;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_w1s
+ *
+ * eMMC DMA Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_dma_int_w1s {
+ u64 u;
+ struct mio_emm_dma_int_w1s_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+{
+ return 0x198;
+}
+
+/**
+ * Register (RSL) mio_emm_int
+ *
+ * eMMC Interrupt Register
+ */
+union mio_emm_int {
+ u64 u;
+ struct mio_emm_int_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT(void)
+{
+ return 0x2078;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1c
+ *
+ * eMMC Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union mio_emm_int_ena_w1c {
+ u64 u;
+ struct mio_emm_int_ena_w1c_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_ena_w1c_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_ena_w1c_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+{
+ return 0x20b8;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1s
+ *
+ * eMMC Interrupt Enable Set Register This register sets interrupt enable
+ * bits.
+ */
+union mio_emm_int_ena_w1s {
+ u64 u;
+ struct mio_emm_int_ena_w1s_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_ena_w1s_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_ena_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+{
+ return 0x20b0;
+}
+
+/**
+ * Register (RSL) mio_emm_int_w1s
+ *
+ * eMMC Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_int_w1s {
+ u64 u;
+ struct mio_emm_int_w1s_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_w1s_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_W1S(void)
+{
+ return 0x2080;
+}
+
+/**
+ * Register (RSL) mio_emm_io_ctl
+ *
+ * eMMC I/O Control Register
+ */
+union mio_emm_io_ctl {
+ u64 u;
+ struct mio_emm_io_ctl_s {
+ u64 slew : 1;
+ u64 reserved_1 : 1;
+ u64 drive : 2;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct mio_emm_io_ctl_s cn; */
+};
+
+static inline u64 MIO_EMM_IO_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_IO_CTL(void)
+{
+ return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_mode#
+ *
+ * eMMC Operating Mode Register
+ */
+union mio_emm_modex {
+ u64 u;
+ struct mio_emm_modex_s {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 clk_swap : 1;
+ u64 reserved_37_39 : 3;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_63 : 13;
+ } s;
+ struct mio_emm_modex_cn8 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ struct mio_emm_modex_cn96xxp1 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_63 : 13;
+ } cn96xxp1;
+ /* struct mio_emm_modex_s cn96xxp3; */
+ /* struct mio_emm_modex_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_MODEX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MODEX(u64 a)
+{
+ return 0x2008 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_pba#
+ *
+ * eMMC MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_pbax {
+ u64 u;
+ struct mio_emm_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct mio_emm_msix_pbax_s cn; */
+};
+
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+{
+ return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_addr
+ *
+ * eMMC MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_addr {
+ u64 u;
+ struct mio_emm_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 51;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_msix_vecx_addr_cn8 {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 47;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_msix_vecx_addr_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+{
+ return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_ctl
+ *
+ * eMMC MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_ctl {
+ u64 u;
+ struct mio_emm_msix_vecx_ctl_s {
+ u64 data : 32;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ struct mio_emm_msix_vecx_ctl_cn8 {
+ u64 data : 20;
+ u64 reserved_20_31 : 12;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } cn8;
+ /* struct mio_emm_msix_vecx_ctl_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+{
+ return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_rca
+ *
+ * eMMC Relative Card Address Register
+ */
+union mio_emm_rca {
+ u64 u;
+ struct mio_emm_rca_s {
+ u64 card_rca : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct mio_emm_rca_s cn; */
+};
+
+static inline u64 MIO_EMM_RCA(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RCA(void)
+{
+ return 0x20a0;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_hi
+ *
+ * eMMC Response Data High Register
+ */
+union mio_emm_rsp_hi {
+ u64 u;
+ struct mio_emm_rsp_hi_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_rsp_hi_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_HI(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_HI(void)
+{
+ return 0x2070;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_lo
+ *
+ * eMMC Response Data Low Register
+ */
+union mio_emm_rsp_lo {
+ u64 u;
+ struct mio_emm_rsp_lo_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_rsp_lo_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_LO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_LO(void)
+{
+ return 0x2068;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_sts
+ *
+ * eMMC Response Status Register
+ */
+union mio_emm_rsp_sts {
+ u64 u;
+ struct mio_emm_rsp_sts_s {
+ u64 cmd_done : 1;
+ u64 cmd_idx : 6;
+ u64 cmd_type : 2;
+ u64 rsp_type : 3;
+ u64 rsp_val : 1;
+ u64 rsp_bad_sts : 1;
+ u64 rsp_crc_err : 1;
+ u64 rsp_timeout : 1;
+ u64 stp_val : 1;
+ u64 stp_bad_sts : 1;
+ u64 stp_crc_err : 1;
+ u64 stp_timeout : 1;
+ u64 rsp_busybit : 1;
+ u64 blk_crc_err : 1;
+ u64 blk_timeout : 1;
+ u64 dbuf : 1;
+ u64 reserved_24_27 : 4;
+ u64 dbuf_err : 1;
+ u64 reserved_29_54 : 26;
+ u64 acc_timeout : 1;
+ u64 dma_pend : 1;
+ u64 dma_val : 1;
+ u64 switch_val : 1;
+ u64 cmd_val : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } s;
+ /* struct mio_emm_rsp_sts_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_STS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_STS(void)
+{
+ return 0x2060;
+}
+
+/**
+ * Register (RSL) mio_emm_sample
+ *
+ * eMMC Sampling Register
+ */
+union mio_emm_sample {
+ u64 u;
+ struct mio_emm_sample_s {
+ u64 dat_cnt : 10;
+ u64 reserved_10_15 : 6;
+ u64 cmd_cnt : 10;
+ u64 reserved_26_63 : 38;
+ } s;
+ /* struct mio_emm_sample_s cn; */
+};
+
+static inline u64 MIO_EMM_SAMPLE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SAMPLE(void)
+{
+ return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_sts_mask
+ *
+ * eMMC Status Mask Register
+ */
+union mio_emm_sts_mask {
+ u64 u;
+ struct mio_emm_sts_mask_s {
+ u64 sts_msk : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct mio_emm_sts_mask_s cn; */
+};
+
+static inline u64 MIO_EMM_STS_MASK(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_STS_MASK(void)
+{
+ return 0x2098;
+}
+
+/**
+ * Register (RSL) mio_emm_switch
+ *
+ * eMMC Operating Mode Switch Register This register allows software to
+ * change eMMC related parameters associated with a specific BUS_ID. The
+ * MIO_EMM_MODE() registers contain the current setting for each BUS.
+ * This register is also used to switch the [CLK_HI] and [CLK_LO]
+ * settings associated with the common EMMC_CLK. These settings can only
+ * be changed when [BUS_ID] = 0.
+ */
+union mio_emm_switch {
+ u64 u;
+ struct mio_emm_switch_s {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 clk_swap : 1;
+ u64 reserved_37_39 : 3;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_55 : 5;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } s;
+ struct mio_emm_switch_cn8 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 reserved_49_55 : 7;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } cn8;
+ struct mio_emm_switch_cn96xxp1 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_55 : 5;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } cn96xxp1;
+ /* struct mio_emm_switch_s cn96xxp3; */
+ /* struct mio_emm_switch_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_SWITCH(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SWITCH(void)
+{
+ return 0x2048;
+}
+
+/**
+ * Register (RSL) mio_emm_tap
+ *
+ * eMMC TAP Delay Register This register indicates the delay line
+ * characteristics.
+ */
+union mio_emm_tap {
+ u64 u;
+ struct mio_emm_tap_s {
+ u64 delay : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct mio_emm_tap_s cn; */
+};
+
+static inline u64 MIO_EMM_TAP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TAP(void)
+{
+ return 0x20c8;
+}
+
+/**
+ * Register (RSL) mio_emm_timing
+ *
+ * eMMC Timing Register This register determines the number of tap delays
+ * the EMM_DAT, EMM_DS, and EMM_CMD lines are transmitted or received in
+ * relation to EMM_CLK. These values should only be changed when the eMMC
+ * bus is idle.
+ */
+union mio_emm_timing {
+ u64 u;
+ struct mio_emm_timing_s {
+ u64 data_out_tap : 6;
+ u64 reserved_6_15 : 10;
+ u64 data_in_tap : 6;
+ u64 reserved_22_31 : 10;
+ u64 cmd_out_tap : 6;
+ u64 reserved_38_47 : 10;
+ u64 cmd_in_tap : 6;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct mio_emm_timing_s cn; */
+};
+
+static inline u64 MIO_EMM_TIMING(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TIMING(void)
+{
+ return 0x20d0;
+}
+
+/**
+ * Register (RSL) mio_emm_wdog
+ *
+ * eMMC Watchdog Register
+ */
+union mio_emm_wdog {
+ u64 u;
+ struct mio_emm_wdog_s {
+ u64 clk_cnt : 26;
+ u64 reserved_26_63 : 38;
+ } s;
+ /* struct mio_emm_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_WDOG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_WDOG(void)
+{
+ return 0x2088;
+}
+
+#endif /* __CSRS_MIO_EMM_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_NIX_H__
+#define __CSRS_NIX_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * NIX.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration nix_af_int_vec_e
+ *
+ * NIX Admin Function Interrupt Vector Enumeration Enumerates the NIX AF
+ * MSI-X interrupt vectors.
+ */
+#define NIX_AF_INT_VEC_E_AF_ERR (3)
+#define NIX_AF_INT_VEC_E_AQ_DONE (2)
+#define NIX_AF_INT_VEC_E_GEN (1)
+#define NIX_AF_INT_VEC_E_POISON (4)
+#define NIX_AF_INT_VEC_E_RVU (0)
+
+/**
+ * Enumeration nix_aq_comp_e
+ *
+ * NIX Completion Enumeration Enumerates the values of
+ * NIX_AQ_RES_S[COMPCODE].
+ */
+#define NIX_AQ_COMP_E_CTX_FAULT (4)
+#define NIX_AQ_COMP_E_CTX_POISON (3)
+#define NIX_AQ_COMP_E_GOOD (1)
+#define NIX_AQ_COMP_E_LOCKERR (5)
+#define NIX_AQ_COMP_E_NOTDONE (0)
+#define NIX_AQ_COMP_E_SQB_ALLOC_FAIL (6)
+#define NIX_AQ_COMP_E_SWERR (2)
+
+/**
+ * Enumeration nix_aq_ctype_e
+ *
+ * NIX Context Type Enumeration Enumerates NIX_AQ_INST_S[CTYPE] values.
+ */
+#define NIX_AQ_CTYPE_E_CQ (2)
+#define NIX_AQ_CTYPE_E_DYNO (5)
+#define NIX_AQ_CTYPE_E_MCE (3)
+#define NIX_AQ_CTYPE_E_RQ (0)
+#define NIX_AQ_CTYPE_E_RSS (4)
+#define NIX_AQ_CTYPE_E_SQ (1)
+
+/**
+ * Enumeration nix_aq_instop_e
+ *
+ * NIX Admin Queue Opcode Enumeration Enumerates NIX_AQ_INST_S[OP]
+ * values.
+ */
+#define NIX_AQ_INSTOP_E_INIT (1)
+#define NIX_AQ_INSTOP_E_LOCK (4)
+#define NIX_AQ_INSTOP_E_NOP (0)
+#define NIX_AQ_INSTOP_E_READ (3)
+#define NIX_AQ_INSTOP_E_UNLOCK (5)
+#define NIX_AQ_INSTOP_E_WRITE (2)
+
+/**
+ * Enumeration nix_chan_e
+ *
+ * NIX Channel Number Enumeration Enumerates the receive and transmit
+ * channels, and values of NIX_RX_PARSE_S[CHAN],
+ * NIX_SQ_CTX_S[DEFAULT_CHAN]. CNXXXX implements a subset of these
+ * channels. Specifically, only channels for links enumerated by
+ * NIX_LINK_E are implemented. Internal: P2X/X2P channel enumeration for
+ * t9x.
+ */
+#define NIX_CHAN_E_CGXX_LMACX_CHX(a, b, c) \
+ (0x800 + 0x100 * (a) + 0x10 * (b) + (c))
+#define NIX_CHAN_E_LBKX_CHX(a, b) (0 + 0x100 * (a) + (b))
+#define NIX_CHAN_E_RX(a) (0 + 0x100 * (a))
+#define NIX_CHAN_E_SDP_CHX(a) (0x700 + (a))
+
+/**
+ * Enumeration nix_colorresult_e
+ *
+ * NIX Color Result Enumeration Enumerates the values of
+ * NIX_MEM_RESULT_S[COLOR], NIX_AF_TL1()_MD_DEBUG1[COLOR] and
+ * NIX_AF_TL1()_MD_DEBUG1[COLOR].
+ */
+#define NIX_COLORRESULT_E_GREEN (0)
+#define NIX_COLORRESULT_E_RED_DROP (3)
+#define NIX_COLORRESULT_E_RED_SEND (2)
+#define NIX_COLORRESULT_E_YELLOW (1)
+
+/**
+ * Enumeration nix_cqerrint_e
+ *
+ * NIX Completion Queue Interrupt Enumeration Enumerates the bit index of
+ * NIX_CQ_CTX_S[CQ_ERR_INT,CQ_ERR_INT_ENA].
+ */
+#define NIX_CQERRINT_E_CQE_FAULT (2)
+#define NIX_CQERRINT_E_DOOR_ERR (0)
+#define NIX_CQERRINT_E_WR_FULL (1)
+
+/**
+ * Enumeration nix_intf_e
+ *
+ * NIX Interface Number Enumeration Enumerates the bit index of
+ * NIX_AF_STATUS[CALIBRATE_STATUS].
+ */
+#define NIX_INTF_E_CGXX(a) (0 + (a))
+#define NIX_INTF_E_LBKX(a) (3 + (a))
+#define NIX_INTF_E_SDP (4)
+
+/**
+ * Enumeration nix_lf_int_vec_e
+ *
+ * NIX Local Function Interrupt Vector Enumeration Enumerates the NIX
+ * MSI-X interrupt vectors per LF.
+ */
+#define NIX_LF_INT_VEC_E_CINTX(a) (0x40 + (a))
+#define NIX_LF_INT_VEC_E_ERR_INT (0x81)
+#define NIX_LF_INT_VEC_E_GINT (0x80)
+#define NIX_LF_INT_VEC_E_POISON (0x82)
+#define NIX_LF_INT_VEC_E_QINTX(a) (0 + (a))
+
+/**
+ * Enumeration nix_link_e
+ *
+ * NIX Link Number Enumeration Enumerates the receive and transmit links,
+ * and LINK index of NIX_AF_RX_LINK()_CFG, NIX_AF_RX_LINK()_WRR_CFG,
+ * NIX_AF_TX_LINK()_NORM_CREDIT, NIX_AF_TX_LINK()_HW_XOFF and
+ * NIX_AF_TL3_TL2()_LINK()_CFG.
+ */
+#define NIX_LINK_E_CGXX_LMACX(a, b) (0 + 4 * (a) + (b))
+#define NIX_LINK_E_LBKX(a) (0xc + (a))
+#define NIX_LINK_E_MC (0xe)
+#define NIX_LINK_E_SDP (0xd)
+
+/**
+ * Enumeration nix_lsoalg_e
+ *
+ * NIX Large Send Offload Algorithm Enumeration Enumerates
+ * NIX_AF_LSO_FORMAT()_FIELD()[ALG] values. Specifies algorithm for
+ * modifying the associated LSO packet field.
+ */
+#define NIX_LSOALG_E_ADD_OFFSET (3)
+#define NIX_LSOALG_E_ADD_PAYLEN (2)
+#define NIX_LSOALG_E_ADD_SEGNUM (1)
+#define NIX_LSOALG_E_NOP (0)
+#define NIX_LSOALG_E_TCP_FLAGS (4)
+
+/**
+ * Enumeration nix_maxsqesz_e
+ *
+ * NIX Maximum SQE Size Enumeration Enumerates the values of
+ * NIX_SQ_CTX_S[MAX_SQE_SIZE].
+ */
+#define NIX_MAXSQESZ_E_W16 (0)
+#define NIX_MAXSQESZ_E_W8 (1)
+
+/**
+ * Enumeration nix_mdtype_e
+ *
+ * NIX Meta Descriptor Type Enumeration Enumerates values of
+ * NIX_AF_MDQ()_MD_DEBUG[MD_TYPE].
+ */
+#define NIX_MDTYPE_E_FLUSH (1)
+#define NIX_MDTYPE_E_PMD (2)
+#define NIX_MDTYPE_E_RSVD (0)
+
+/**
+ * Enumeration nix_mnqerr_e
+ *
+ * NIX Meta-Descriptor Enqueue Error Enumeration Enumerates
+ * NIX_LF_MNQ_ERR_DBG[ERRCODE] values.
+ */
+#define NIX_MNQERR_E_CQ_QUERY_ERR (6)
+#define NIX_MNQERR_E_LSO_ERR (5)
+#define NIX_MNQERR_E_MAXLEN_ERR (8)
+#define NIX_MNQERR_E_MAX_SQE_SIZE_ERR (7)
+#define NIX_MNQERR_E_SQB_FAULT (2)
+#define NIX_MNQERR_E_SQB_POISON (3)
+#define NIX_MNQERR_E_SQE_SIZEM1_ZERO (9)
+#define NIX_MNQERR_E_SQ_CTX_FAULT (0)
+#define NIX_MNQERR_E_SQ_CTX_POISON (1)
+#define NIX_MNQERR_E_TOTAL_ERR (4)
+
+/**
+ * Enumeration nix_ndc_rx_port_e
+ *
+ * NIX Receive NDC Port Enumeration Enumerates NIX receive NDC
+ * (NDC_IDX_E::NIX()_RX) ports and the PORT index of
+ * NDC_AF_PORT()_RT()_RW()_REQ_PC and NDC_AF_PORT()_RT()_RW()_LAT_PC.
+ */
+#define NIX_NDC_RX_PORT_E_AQ (0)
+#define NIX_NDC_RX_PORT_E_CINT (2)
+#define NIX_NDC_RX_PORT_E_CQ (1)
+#define NIX_NDC_RX_PORT_E_MC (3)
+#define NIX_NDC_RX_PORT_E_PKT (4)
+#define NIX_NDC_RX_PORT_E_RQ (5)
+
+/**
+ * Enumeration nix_ndc_tx_port_e
+ *
+ * NIX Transmit NDC Port Enumeration Enumerates NIX transmit NDC
+ * (NDC_IDX_E::NIX()_TX) ports and the PORT index of
+ * NDC_AF_PORT()_RT()_RW()_REQ_PC and NDC_AF_PORT()_RT()_RW()_LAT_PC.
+ */
+#define NIX_NDC_TX_PORT_E_DEQ (3)
+#define NIX_NDC_TX_PORT_E_DMA (4)
+#define NIX_NDC_TX_PORT_E_ENQ (1)
+#define NIX_NDC_TX_PORT_E_LMT (0)
+#define NIX_NDC_TX_PORT_E_MNQ (2)
+#define NIX_NDC_TX_PORT_E_XQE (5)
+
+/**
+ * Enumeration nix_re_opcode_e
+ *
+ * NIX Receive Error Opcode Enumeration Enumerates
+ * NIX_RX_PARSE_S[ERRCODE] values when NIX_RX_PARSE_S[ERRLEV] =
+ * NPC_ERRLEV_E::RE.
+ */
+#define NIX_RE_OPCODE_E_OL2_LENMISM (0x12)
+#define NIX_RE_OPCODE_E_OVERSIZE (0x11)
+#define NIX_RE_OPCODE_E_RE_DMAPKT (0xf)
+#define NIX_RE_OPCODE_E_RE_FCS (7)
+#define NIX_RE_OPCODE_E_RE_FCS_RCV (8)
+#define NIX_RE_OPCODE_E_RE_JABBER (2)
+#define NIX_RE_OPCODE_E_RE_NONE (0)
+#define NIX_RE_OPCODE_E_RE_PARTIAL (1)
+#define NIX_RE_OPCODE_E_RE_RX_CTL (0xb)
+#define NIX_RE_OPCODE_E_RE_SKIP (0xc)
+#define NIX_RE_OPCODE_E_RE_TERMINATE (9)
+#define NIX_RE_OPCODE_E_UNDERSIZE (0x10)
+
+/**
+ * Enumeration nix_redalg_e
+ *
+ * NIX Red Algorithm Enumeration Enumerates the different algorithms of
+ * NIX_SEND_EXT_S[SHP_RA].
+ */
+#define NIX_REDALG_E_DISCARD (3)
+#define NIX_REDALG_E_SEND (1)
+#define NIX_REDALG_E_STALL (2)
+#define NIX_REDALG_E_STD (0)
+
+/**
+ * Enumeration nix_rqint_e
+ *
+ * NIX Receive Queue Interrupt Enumeration Enumerates the bit index of
+ * NIX_RQ_CTX_S[RQ_INT,RQ_INT_ENA].
+ */
+#define NIX_RQINT_E_DROP (0)
+#define NIX_RQINT_E_RX(a) (0 + (a))
+#define NIX_RQINT_E_RED (1)
+
+/**
+ * Enumeration nix_rx_actionop_e
+ *
+ * NIX Receive Action Opcode Enumeration Enumerates the values of
+ * NIX_RX_ACTION_S[OP].
+ */
+#define NIX_RX_ACTIONOP_E_DROP (0)
+#define NIX_RX_ACTIONOP_E_MCAST (3)
+#define NIX_RX_ACTIONOP_E_MIRROR (6)
+#define NIX_RX_ACTIONOP_E_PF_FUNC_DROP (5)
+#define NIX_RX_ACTIONOP_E_RSS (4)
+#define NIX_RX_ACTIONOP_E_UCAST (1)
+#define NIX_RX_ACTIONOP_E_UCAST_IPSEC (2)
+
+/**
+ * Enumeration nix_rx_mcop_e
+ *
+ * NIX Receive Multicast/Mirror Opcode Enumeration Enumerates the values
+ * of NIX_RX_MCE_S[OP].
+ */
+#define NIX_RX_MCOP_E_RQ (0)
+#define NIX_RX_MCOP_E_RSS (1)
+
+/**
+ * Enumeration nix_rx_perrcode_e
+ *
+ * NIX Receive Protocol Error Code Enumeration Enumerates
+ * NIX_RX_PARSE_S[ERRCODE] values when NIX_RX_PARSE_S[ERRLEV] =
+ * NPC_ERRLEV_E::NIX.
+ */
+#define NIX_RX_PERRCODE_E_BUFS_OFLOW (0xa)
+#define NIX_RX_PERRCODE_E_DATA_FAULT (8)
+#define NIX_RX_PERRCODE_E_IL3_LEN (0x20)
+#define NIX_RX_PERRCODE_E_IL4_CHK (0x22)
+#define NIX_RX_PERRCODE_E_IL4_LEN (0x21)
+#define NIX_RX_PERRCODE_E_IL4_PORT (0x23)
+#define NIX_RX_PERRCODE_E_MCAST_FAULT (4)
+#define NIX_RX_PERRCODE_E_MCAST_POISON (6)
+#define NIX_RX_PERRCODE_E_MEMOUT (9)
+#define NIX_RX_PERRCODE_E_MIRROR_FAULT (5)
+#define NIX_RX_PERRCODE_E_MIRROR_POISON (7)
+#define NIX_RX_PERRCODE_E_NPC_RESULT_ERR (2)
+#define NIX_RX_PERRCODE_E_OL3_LEN (0x10)
+#define NIX_RX_PERRCODE_E_OL4_CHK (0x12)
+#define NIX_RX_PERRCODE_E_OL4_LEN (0x11)
+#define NIX_RX_PERRCODE_E_OL4_PORT (0x13)
+
+/**
+ * Enumeration nix_send_status_e
+ *
+ * NIX Send Completion Status Enumeration Enumerates values of
+ * NIX_SEND_COMP_S[STATUS] and NIX_LF_SEND_ERR_DBG[ERRCODE].
+ */
+#define NIX_SEND_STATUS_E_DATA_FAULT (0x16)
+#define NIX_SEND_STATUS_E_DATA_POISON (0x17)
+#define NIX_SEND_STATUS_E_GOOD (0)
+#define NIX_SEND_STATUS_E_INVALID_SUBDC (0x14)
+#define NIX_SEND_STATUS_E_JUMP_FAULT (7)
+#define NIX_SEND_STATUS_E_JUMP_POISON (8)
+#define NIX_SEND_STATUS_E_LOCK_VIOL (0x21)
+#define NIX_SEND_STATUS_E_NPC_DROP_ACTION (0x20)
+#define NIX_SEND_STATUS_E_NPC_MCAST_ABORT (0x24)
+#define NIX_SEND_STATUS_E_NPC_MCAST_CHAN_ERR (0x23)
+#define NIX_SEND_STATUS_E_NPC_UCAST_CHAN_ERR (0x22)
+#define NIX_SEND_STATUS_E_NPC_VTAG_PTR_ERR (0x25)
+#define NIX_SEND_STATUS_E_NPC_VTAG_SIZE_ERR (0x26)
+#define NIX_SEND_STATUS_E_SEND_CRC_ERR (0x10)
+#define NIX_SEND_STATUS_E_SEND_EXT_ERR (6)
+#define NIX_SEND_STATUS_E_SEND_HDR_ERR (5)
+#define NIX_SEND_STATUS_E_SEND_IMM_ERR (0x11)
+#define NIX_SEND_STATUS_E_SEND_MEM_ERR (0x13)
+#define NIX_SEND_STATUS_E_SEND_MEM_FAULT (0x27)
+#define NIX_SEND_STATUS_E_SEND_SG_ERR (0x12)
+#define NIX_SEND_STATUS_E_SQB_FAULT (3)
+#define NIX_SEND_STATUS_E_SQB_POISON (4)
+#define NIX_SEND_STATUS_E_SQ_CTX_FAULT (1)
+#define NIX_SEND_STATUS_E_SQ_CTX_POISON (2)
+#define NIX_SEND_STATUS_E_SUBDC_ORDER_ERR (0x15)
+
+/**
+ * Enumeration nix_sendcrcalg_e
+ *
+ * NIX Send CRC Algorithm Enumeration Enumerates the CRC algorithm used,
+ * see NIX_SEND_CRC_S[ALG].
+ */
+#define NIX_SENDCRCALG_E_CRC32 (0)
+#define NIX_SENDCRCALG_E_CRC32C (1)
+#define NIX_SENDCRCALG_E_ONES16 (2)
+
+/**
+ * Enumeration nix_sendl3type_e
+ *
+ * NIX Send Layer 3 Header Type Enumeration Enumerates values of
+ * NIX_SEND_HDR_S[OL3TYPE], NIX_SEND_HDR_S[IL3TYPE]. Internal: Encoding
+ * matches DPDK TX IP types: \<pre\> PKT_TX_IP_CKSUM (1ULL \<\< 54)
+ * PKT_TX_IPV4 (1ULL \<\< 55) PKT_TX_IPV6 (1ULL \<\<
+ * 56) PKT_TX_OUTER_IP_CKSUM(1ULL \<\< 58) PKT_TX_OUTER_IPV4 (1ULL
+ * \<\< 59) PKT_TX_OUTER_IPV6 (1ULL \<\< 60) \</pre\>
+ */
+#define NIX_SENDL3TYPE_E_IP4 (2)
+#define NIX_SENDL3TYPE_E_IP4_CKSUM (3)
+#define NIX_SENDL3TYPE_E_IP6 (4)
+#define NIX_SENDL3TYPE_E_NONE (0)
+
+/**
+ * Enumeration nix_sendl4type_e
+ *
+ * NIX Send Layer 4 Header Type Enumeration Enumerates values of
+ * NIX_SEND_HDR_S[OL4TYPE], NIX_SEND_HDR_S[IL4TYPE]. Internal: Encoding
+ * matches DPDK TX L4 types. \<pre\> PKT_TX_L4_NO_CKSUM (0ULL \<\< 52)
+ * // Disable L4 cksum of TX pkt. PKT_TX_TCP_CKSUM (1ULL \<\< 52) //
+ * TCP cksum of TX pkt. computed by nic. PKT_TX_SCTP_CKSUM (2ULL \<\<
+ * 52) // SCTP cksum of TX pkt. computed by nic. PKT_TX_UDP_CKSUM
+ * (3ULL \<\< 52) // UDP cksum of TX pkt. computed by nic. \</pre\>
+ */
+#define NIX_SENDL4TYPE_E_NONE (0)
+#define NIX_SENDL4TYPE_E_SCTP_CKSUM (2)
+#define NIX_SENDL4TYPE_E_TCP_CKSUM (1)
+#define NIX_SENDL4TYPE_E_UDP_CKSUM (3)
+
+/**
+ * Enumeration nix_sendldtype_e
+ *
+ * NIX Send Load Type Enumeration Enumerates the load transaction types
+ * for reading segment bytes specified by NIX_SEND_SG_S[LD_TYPE] and
+ * NIX_SEND_JUMP_S[LD_TYPE]. Internal: The hardware implementation
+ * treats undefined encodings as LDD load type.
+ */
+#define NIX_SENDLDTYPE_E_LDD (0)
+#define NIX_SENDLDTYPE_E_LDT (1)
+#define NIX_SENDLDTYPE_E_LDWB (2)
+
+/**
+ * Enumeration nix_sendmemalg_e
+ *
+ * NIX Memory Modify Algorithm Enumeration Enumerates the different
+ * algorithms for modifying memory; see NIX_SEND_MEM_S[ALG]. mbufs_freed
+ * is the number of gather buffers freed to NPA for the send descriptor.
+ * See NIX_SEND_HDR_S[DF] and NIX_SEND_SG_S[I*].
+ */
+#define NIX_SENDMEMALG_E_ADD (8)
+#define NIX_SENDMEMALG_E_ADDLEN (0xa)
+#define NIX_SENDMEMALG_E_ADDMBUF (0xc)
+#define NIX_SENDMEMALG_E_SET (0)
+#define NIX_SENDMEMALG_E_SETRSLT (2)
+#define NIX_SENDMEMALG_E_SETTSTMP (1)
+#define NIX_SENDMEMALG_E_SUB (9)
+#define NIX_SENDMEMALG_E_SUBLEN (0xb)
+#define NIX_SENDMEMALG_E_SUBMBUF (0xd)
+
+/**
+ * Enumeration nix_sendmemdsz_e
+ *
+ * NIX Memory Data Size Enumeration Enumerates the datum size for
+ * modifying memory; see NIX_SEND_MEM_S[DSZ].
+ */
+#define NIX_SENDMEMDSZ_E_B16 (2)
+#define NIX_SENDMEMDSZ_E_B32 (1)
+#define NIX_SENDMEMDSZ_E_B64 (0)
+#define NIX_SENDMEMDSZ_E_B8 (3)
+
+/**
+ * Enumeration nix_sqint_e
+ *
+ * NIX Send Queue Interrupt Enumeration Enumerates the bit index of
+ * NIX_SQ_CTX_S[SQ_INT,SQ_INT_ENA].
+ */
+#define NIX_SQINT_E_LMT_ERR (0)
+#define NIX_SQINT_E_MNQ_ERR (1)
+#define NIX_SQINT_E_SEND_ERR (2)
+#define NIX_SQINT_E_SQB_ALLOC_FAIL (3)
+
+/**
+ * Enumeration nix_sqoperr_e
+ *
+ * NIX SQ Operation Error Enumeration Enumerates
+ * NIX_LF_SQ_OP_ERR_DBG[ERRCODE] values.
+ */
+#define NIX_SQOPERR_E_MAX_SQE_SIZE_ERR (4)
+#define NIX_SQOPERR_E_SQB_FAULT (7)
+#define NIX_SQOPERR_E_SQB_NULL (6)
+#define NIX_SQOPERR_E_SQE_OFLOW (5)
+#define NIX_SQOPERR_E_SQE_SIZEM1_ZERO (8)
+#define NIX_SQOPERR_E_SQ_CTX_FAULT (1)
+#define NIX_SQOPERR_E_SQ_CTX_POISON (2)
+#define NIX_SQOPERR_E_SQ_DISABLED (3)
+#define NIX_SQOPERR_E_SQ_OOR (0)
+
+/**
+ * Enumeration nix_stat_lf_rx_e
+ *
+ * NIX Local Function Receive Statistics Enumeration Enumerates the last
+ * index of NIX_AF_LF()_RX_STAT() and NIX_LF_RX_STAT().
+ */
+#define NIX_STAT_LF_RX_E_RX_BCAST (2)
+#define NIX_STAT_LF_RX_E_RX_DROP (4)
+#define NIX_STAT_LF_RX_E_RX_DROP_OCTS (5)
+#define NIX_STAT_LF_RX_E_RX_DRP_BCAST (8)
+#define NIX_STAT_LF_RX_E_RX_DRP_L3BCAST (0xa)
+#define NIX_STAT_LF_RX_E_RX_DRP_L3MCAST (0xb)
+#define NIX_STAT_LF_RX_E_RX_DRP_MCAST (9)
+#define NIX_STAT_LF_RX_E_RX_ERR (7)
+#define NIX_STAT_LF_RX_E_RX_FCS (6)
+#define NIX_STAT_LF_RX_E_RX_MCAST (3)
+#define NIX_STAT_LF_RX_E_RX_OCTS (0)
+#define NIX_STAT_LF_RX_E_RX_UCAST (1)
+
+/**
+ * Enumeration nix_stat_lf_tx_e
+ *
+ * NIX Local Function Transmit Statistics Enumeration Enumerates the
+ * index of NIX_AF_LF()_TX_STAT() and NIX_LF_TX_STAT(). These statistics
+ * do not account for packet replication due to NIX_TX_ACTION_S[OP] =
+ * NIX_TX_ACTIONOP_E::MCAST.
+ */
+#define NIX_STAT_LF_TX_E_TX_BCAST (1)
+#define NIX_STAT_LF_TX_E_TX_DROP (3)
+#define NIX_STAT_LF_TX_E_TX_MCAST (2)
+#define NIX_STAT_LF_TX_E_TX_OCTS (4)
+#define NIX_STAT_LF_TX_E_TX_UCAST (0)
+
+/**
+ * Enumeration nix_stype_e
+ *
+ * NIX SQB Caching Type Enumeration Enumerates the values of
+ * NIX_SQ_CTX_S[SQE_STYPE].
+ */
+#define NIX_STYPE_E_STF (0)
+#define NIX_STYPE_E_STP (2)
+#define NIX_STYPE_E_STT (1)
+
+/**
+ * Enumeration nix_subdc_e
+ *
+ * NIX Subdescriptor Operation Enumeration Enumerates send and receive
+ * subdescriptor codes. The codes differentiate subdescriptors within a
+ * NIX send or receive descriptor, excluding NIX_SEND_HDR_S for send and
+ * NIX_CQE_HDR_S/NIX_WQE_HDR_S for receive, which are determined by their
+ * position as the first subdescriptor, and NIX_RX_PARSE_S, which is
+ * determined by its position as the second subdescriptor.
+ */
+#define NIX_SUBDC_E_CRC (2)
+#define NIX_SUBDC_E_EXT (1)
+#define NIX_SUBDC_E_IMM (3)
+#define NIX_SUBDC_E_JUMP (6)
+#define NIX_SUBDC_E_MEM (5)
+#define NIX_SUBDC_E_NOP (0)
+#define NIX_SUBDC_E_SG (4)
+#define NIX_SUBDC_E_SOD (0xf)
+#define NIX_SUBDC_E_WORK (7)
+
+/**
+ * Enumeration nix_tx_actionop_e
+ *
+ * NIX Transmit Action Opcode Enumeration Enumerates the values of
+ * NIX_TX_ACTION_S[OP].
+ */
+#define NIX_TX_ACTIONOP_E_DROP (0)
+#define NIX_TX_ACTIONOP_E_DROP_VIOL (5)
+#define NIX_TX_ACTIONOP_E_MCAST (3)
+#define NIX_TX_ACTIONOP_E_UCAST_CHAN (2)
+#define NIX_TX_ACTIONOP_E_UCAST_DEFAULT (1)
+
+/**
+ * Enumeration nix_tx_vtagop_e
+ *
+ * NIX Transmit Vtag Opcode Enumeration Enumerates the values of
+ * NIX_TX_VTAG_ACTION_S[VTAG0_OP,VTAG1_OP].
+ */
+#define NIX_TX_VTAGOP_E_INSERT (1)
+#define NIX_TX_VTAGOP_E_NOP (0)
+#define NIX_TX_VTAGOP_E_REPLACE (2)
+
+/**
+ * Enumeration nix_txlayer_e
+ *
+ * NIX Transmit Layer Enumeration Enumerates the values of
+ * NIX_AF_LSO_FORMAT()_FIELD()[LAYER].
+ */
+#define NIX_TXLAYER_E_IL3 (2)
+#define NIX_TXLAYER_E_IL4 (3)
+#define NIX_TXLAYER_E_OL3 (0)
+#define NIX_TXLAYER_E_OL4 (1)
+
+/**
+ * Enumeration nix_vtagsize_e
+ *
+ * NIX Vtag Size Enumeration Enumerates the values of
+ * NIX_AF_TX_VTAG_DEF()_CTL[SIZE] and NIX_AF_LF()_RX_VTAG_TYPE()[SIZE].
+ */
+#define NIX_VTAGSIZE_E_T4 (0)
+#define NIX_VTAGSIZE_E_T8 (1)
+
+/**
+ * Enumeration nix_xqe_type_e
+ *
+ * NIX WQE/CQE Type Enumeration Enumerates the values of
+ * NIX_WQE_HDR_S[WQE_TYPE], NIX_CQE_HDR_S[CQE_TYPE].
+ */
+#define NIX_XQE_TYPE_E_INVALID (0)
+#define NIX_XQE_TYPE_E_RX (1)
+#define NIX_XQE_TYPE_E_RX_IPSECD (4)
+#define NIX_XQE_TYPE_E_RX_IPSECH (3)
+#define NIX_XQE_TYPE_E_RX_IPSECS (2)
+#define NIX_XQE_TYPE_E_SEND (8)
+
+/**
+ * Enumeration nix_xqesz_e
+ *
+ * NIX WQE/CQE Size Enumeration Enumerates the values of
+ * NIX_AF_LF()_CFG[XQE_SIZE].
+ */
+#define NIX_XQESZ_E_W16 (1)
+#define NIX_XQESZ_E_W64 (0)
+
+/**
+ * Structure nix_aq_inst_s
+ *
+ * NIX Admin Queue Instruction Structure This structure specifies the AQ
+ * instruction. Instructions and associated software structures are
+ * stored in memory as little-endian unless NIX_AF_CFG[AF_BE] is set.
+ * Hardware reads of NIX_AQ_INST_S do not allocate into LLC. Hardware
+ * reads and writes of the context structure selected by [CTYPE], [LF]
+ * and [CINDEX] use the NDC and LLC caching style configured for that
+ * context. For example: * When [CTYPE] = NIX_AQ_CTYPE_E::RQ: use
+ * NIX_AF_LF()_RSS_CFG[CACHING] and NIX_AF_LF()_RSS_CFG[WAY_MASK]. * When
+ * [CTYPE] = NIX_AQ_CTYPE_E::MCE: use NIX_AF_RX_MCAST_CFG[CACHING] and
+ * NIX_AF_RX_MCAST_CFG[WAY_MASK].
+ */
+union nix_aq_inst_s {
+ u64 u[2];
+ struct nix_aq_inst_s_s {
+ u64 op : 4;
+ u64 ctype : 4;
+ u64 lf : 7;
+ u64 reserved_15_23 : 9;
+ u64 cindex : 20;
+ u64 reserved_44_62 : 19;
+ u64 doneint : 1;
+ u64 res_addr : 64;
+ } s;
+ /* struct nix_aq_inst_s_s cn; */
+};
+
+/**
+ * Structure nix_aq_res_s
+ *
+ * NIX Admin Queue Result Structure NIX writes this structure after it
+ * completes the NIX_AQ_INST_S instruction. The result structure is
+ * exactly 16 bytes, and each instruction completion produces exactly one
+ * result structure. Results and associated software structures are
+ * stored in memory as little-endian unless NIX_AF_CFG[AF_BE] is set.
+ * When [OP] = NIX_AQ_INSTOP_E::INIT, WRITE or READ, this structure is
+ * immediately followed by context read or write data. See
+ * NIX_AQ_INSTOP_E. Hardware writes of NIX_AQ_RES_S and context data
+ * always allocate into LLC. Hardware reads of context data do not
+ * allocate into LLC.
+ */
+union nix_aq_res_s {
+ u64 u[2];
+ struct nix_aq_res_s_s {
+ u64 op : 4;
+ u64 ctype : 4;
+ u64 compcode : 8;
+ u64 doneint : 1;
+ u64 reserved_17_63 : 47;
+ u64 reserved_64_127 : 64;
+ } s;
+ /* struct nix_aq_res_s_s cn; */
+};
+
+/**
+ * Structure nix_cint_hw_s
+ *
+ * NIX Completion Interrupt Context Hardware Structure This structure
+ * contains context state maintained by hardware for each completion
+ * interrupt (CINT) in NDC/LLC/DRAM. Software accesses this structure
+ * with the NIX_LF_CINT()* registers. Hardware maintains a table of
+ * NIX_AF_CONST2[CINTS] contiguous NIX_CINT_HW_S structures per LF
+ * starting at AF IOVA NIX_AF_LF()_CINTS_BASE. Always stored in byte
+ * invariant little-endian format (LE8).
+ */
+union nix_cint_hw_s {
+ u64 u[2];
+ struct nix_cint_hw_s_s {
+ u64 ecount : 32;
+ u64 qcount : 16;
+ u64 intr : 1;
+ u64 ena : 1;
+ u64 timer_idx : 8;
+ u64 reserved_58_63 : 6;
+ u64 ecount_wait : 32;
+ u64 qcount_wait : 16;
+ u64 time_wait : 8;
+ u64 reserved_120_127 : 8;
+ } s;
+ /* struct nix_cint_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_cq_ctx_s
+ *
+ * NIX Completion Queue Context Structure This structure contains context
+ * state maintained by hardware for each CQ in NDC/LLC/DRAM. Software
+ * uses the same structure format to read and write an CQ context with
+ * the NIX admin queue.
+ */
+union nix_cq_ctx_s {
+ u64 u[4];
+ struct nix_cq_ctx_s_s {
+ u64 base : 64;
+ u64 reserved_64_67 : 4;
+ u64 bp_ena : 1;
+ u64 reserved_69_71 : 3;
+ u64 bpid : 9;
+ u64 reserved_81_83 : 3;
+ u64 qint_idx : 7;
+ u64 cq_err : 1;
+ u64 cint_idx : 7;
+ u64 avg_con : 9;
+ u64 wrptr : 20;
+ u64 tail : 20;
+ u64 head : 20;
+ u64 avg_level : 8;
+ u64 update_time : 16;
+ u64 bp : 8;
+ u64 drop : 8;
+ u64 drop_ena : 1;
+ u64 ena : 1;
+ u64 reserved_210_211 : 2;
+ u64 substream : 20;
+ u64 caching : 1;
+ u64 reserved_233_235 : 3;
+ u64 qsize : 4;
+ u64 cq_err_int : 8;
+ u64 cq_err_int_ena : 8;
+ } s;
+ /* struct nix_cq_ctx_s_s cn; */
+};
+
+/**
+ * Structure nix_cqe_hdr_s
+ *
+ * NIX Completion Queue Entry Header Structure This 64-bit structure
+ * defines the first word of every CQE. It is immediately followed by
+ * NIX_RX_PARSE_S in a receive CQE, and by NIX_SEND_COMP_S in a send
+ * completion CQE. Stored in memory as little-endian unless
+ * NIX_AF_LF()_CFG[BE] is set.
+ */
+union nix_cqe_hdr_s {
+ u64 u;
+ struct nix_cqe_hdr_s_s {
+ u64 tag : 32;
+ u64 q : 20;
+ u64 reserved_52_57 : 6;
+ u64 node : 2;
+ u64 cqe_type : 4;
+ } s;
+ /* struct nix_cqe_hdr_s_s cn; */
+};
+
+/**
+ * Structure nix_inst_hdr_s
+ *
+ * NIX Instruction Header Structure This structure defines the
+ * instruction header that precedes the packet header supplied to NPC for
+ * packets to be transmitted by NIX.
+ */
+union nix_inst_hdr_s {
+ u64 u;
+ struct nix_inst_hdr_s_s {
+ u64 pf_func : 16;
+ u64 sq : 20;
+ u64 reserved_36_63 : 28;
+ } s;
+ /* struct nix_inst_hdr_s_s cn; */
+};
+
+/**
+ * Structure nix_iova_s
+ *
+ * NIX I/O Virtual Address Structure
+ */
+union nix_iova_s {
+ u64 u;
+ struct nix_iova_s_s {
+ u64 addr : 64;
+ } s;
+ /* struct nix_iova_s_s cn; */
+};
+
+/**
+ * Structure nix_ipsec_dyno_s
+ *
+ * INTERNAL: NIX IPSEC Dynamic Ordering Counter Structure Internal: Not
+ * used; no IPSEC fast-path.
+ */
+union nix_ipsec_dyno_s {
+ u32 u;
+ struct nix_ipsec_dyno_s_s {
+ u32 count : 32;
+ } s;
+ /* struct nix_ipsec_dyno_s_s cn; */
+};
+
+/**
+ * Structure nix_mem_result_s
+ *
+ * NIX Memory Value Structure When
+ * NIX_SEND_MEM_S[ALG]=NIX_SENDMEMALG_E::SETRSLT, the value written to
+ * memory is formed with this structure.
+ */
+union nix_mem_result_s {
+ u64 u;
+ struct nix_mem_result_s_s {
+ u64 v : 1;
+ u64 color : 2;
+ u64 reserved_3_63 : 61;
+ } s;
+ /* struct nix_mem_result_s_s cn; */
+};
+
+/**
+ * Structure nix_op_q_wdata_s
+ *
+ * NIX Statistics Operation Write Data Structure This structure specifies
+ * the write data format of an atomic 64-bit load-and-add of some
+ * NIX_LF_RQ_OP_*, NIX_LF_SQ_OP* and NIX_LF_CQ_OP* registers.
+ */
+union nix_op_q_wdata_s {
+ u64 u;
+ struct nix_op_q_wdata_s_s {
+ u64 reserved_0_31 : 32;
+ u64 q : 20;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct nix_op_q_wdata_s_s cn; */
+};
+
+/**
+ * Structure nix_qint_hw_s
+ *
+ * NIX Queue Interrupt Context Hardware Structure This structure contains
+ * context state maintained by hardware for each queue interrupt (QINT)
+ * in NDC/LLC/DRAM. Software accesses this structure with the
+ * NIX_LF_QINT()* registers. Hardware maintains a table of
+ * NIX_AF_CONST2[QINTS] contiguous NIX_QINT_HW_S structures per LF
+ * starting at IOVA NIX_AF_LF()_QINTS_BASE. Always stored in byte
+ * invariant little-endian format (LE8).
+ */
+union nix_qint_hw_s {
+ u32 u;
+ struct nix_qint_hw_s_s {
+ u32 count : 22;
+ u32 reserved_22_30 : 9;
+ u32 ena : 1;
+ } s;
+ /* struct nix_qint_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_rq_ctx_hw_s
+ *
+ * NIX Receive Queue Context Structure This structure contains context
+ * state maintained by hardware for each RQ in NDC/LLC/DRAM. Software
+ * uses the equivalent NIX_RQ_CTX_S structure format to read and write an
+ * RQ context with the NIX admin queue. Always stored in byte invariant
+ * little-endian format (LE8).
+ */
+union nix_rq_ctx_hw_s {
+ u64 u[16];
+ struct nix_rq_ctx_hw_s_s {
+ u64 ena : 1;
+ u64 sso_ena : 1;
+ u64 ipsech_ena : 1;
+ u64 ena_wqwd : 1;
+ u64 cq : 20;
+ u64 substream : 20;
+ u64 wqe_aura : 20;
+ u64 spb_aura : 20;
+ u64 lpb_aura : 20;
+ u64 sso_grp : 10;
+ u64 sso_tt : 2;
+ u64 pb_caching : 2;
+ u64 wqe_caching : 1;
+ u64 xqe_drop_ena : 1;
+ u64 spb_drop_ena : 1;
+ u64 lpb_drop_ena : 1;
+ u64 wqe_skip : 2;
+ u64 reserved_124_127 : 4;
+ u64 reserved_128_139 : 12;
+ u64 spb_sizem1 : 6;
+ u64 reserved_146_150 : 5;
+ u64 spb_ena : 1;
+ u64 lpb_sizem1 : 12;
+ u64 first_skip : 7;
+ u64 reserved_171 : 1;
+ u64 later_skip : 6;
+ u64 xqe_imm_size : 6;
+ u64 reserved_184_189 : 6;
+ u64 xqe_imm_copy : 1;
+ u64 xqe_hdr_split : 1;
+ u64 xqe_drop : 8;
+ u64 xqe_pass : 8;
+ u64 wqe_pool_drop : 8;
+ u64 wqe_pool_pass : 8;
+ u64 spb_aura_drop : 8;
+ u64 spb_aura_pass : 8;
+ u64 spb_pool_drop : 8;
+ u64 spb_pool_pass : 8;
+ u64 lpb_aura_drop : 8;
+ u64 lpb_aura_pass : 8;
+ u64 lpb_pool_drop : 8;
+ u64 lpb_pool_pass : 8;
+ u64 reserved_288_319 : 32;
+ u64 ltag : 24;
+ u64 good_utag : 8;
+ u64 bad_utag : 8;
+ u64 flow_tagw : 6;
+ u64 reserved_366_383 : 18;
+ u64 octs : 48;
+ u64 reserved_432_447 : 16;
+ u64 pkts : 48;
+ u64 reserved_496_511 : 16;
+ u64 drop_octs : 48;
+ u64 reserved_560_575 : 16;
+ u64 drop_pkts : 48;
+ u64 reserved_624_639 : 16;
+ u64 re_pkts : 48;
+ u64 reserved_688_702 : 15;
+ u64 ena_copy : 1;
+ u64 reserved_704_739 : 36;
+ u64 rq_int : 8;
+ u64 rq_int_ena : 8;
+ u64 qint_idx : 7;
+ u64 reserved_763_767 : 5;
+ u64 reserved_768_831 : 64;
+ u64 reserved_832_895 : 64;
+ u64 reserved_896_959 : 64;
+ u64 reserved_960_1023 : 64;
+ } s;
+ /* struct nix_rq_ctx_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_rq_ctx_s
+ *
+ * NIX Receive Queue Context Structure This structure specifies the
+ * format used by software to read and write an RQ context with the NIX
+ * admin queue.
+ */
+union nix_rq_ctx_s {
+ u64 u[16];
+ struct nix_rq_ctx_s_s {
+ u64 ena : 1;
+ u64 sso_ena : 1;
+ u64 ipsech_ena : 1;
+ u64 ena_wqwd : 1;
+ u64 cq : 20;
+ u64 substream : 20;
+ u64 wqe_aura : 20;
+ u64 spb_aura : 20;
+ u64 lpb_aura : 20;
+ u64 sso_grp : 10;
+ u64 sso_tt : 2;
+ u64 pb_caching : 2;
+ u64 wqe_caching : 1;
+ u64 xqe_drop_ena : 1;
+ u64 spb_drop_ena : 1;
+ u64 lpb_drop_ena : 1;
+ u64 reserved_122_127 : 6;
+ u64 reserved_128_139 : 12;
+ u64 spb_sizem1 : 6;
+ u64 wqe_skip : 2;
+ u64 reserved_148_150 : 3;
+ u64 spb_ena : 1;
+ u64 lpb_sizem1 : 12;
+ u64 first_skip : 7;
+ u64 reserved_171 : 1;
+ u64 later_skip : 6;
+ u64 xqe_imm_size : 6;
+ u64 reserved_184_189 : 6;
+ u64 xqe_imm_copy : 1;
+ u64 xqe_hdr_split : 1;
+ u64 xqe_drop : 8;
+ u64 xqe_pass : 8;
+ u64 wqe_pool_drop : 8;
+ u64 wqe_pool_pass : 8;
+ u64 spb_aura_drop : 8;
+ u64 spb_aura_pass : 8;
+ u64 spb_pool_drop : 8;
+ u64 spb_pool_pass : 8;
+ u64 lpb_aura_drop : 8;
+ u64 lpb_aura_pass : 8;
+ u64 lpb_pool_drop : 8;
+ u64 lpb_pool_pass : 8;
+ u64 reserved_288_291 : 4;
+ u64 rq_int : 8;
+ u64 rq_int_ena : 8;
+ u64 qint_idx : 7;
+ u64 reserved_315_319 : 5;
+ u64 ltag : 24;
+ u64 good_utag : 8;
+ u64 bad_utag : 8;
+ u64 flow_tagw : 6;
+ u64 reserved_366_383 : 18;
+ u64 octs : 48;
+ u64 reserved_432_447 : 16;
+ u64 pkts : 48;
+ u64 reserved_496_511 : 16;
+ u64 drop_octs : 48;
+ u64 reserved_560_575 : 16;
+ u64 drop_pkts : 48;
+ u64 reserved_624_639 : 16;
+ u64 re_pkts : 48;
+ u64 reserved_688_703 : 16;
+ u64 reserved_704_767 : 64;
+ u64 reserved_768_831 : 64;
+ u64 reserved_832_895 : 64;
+ u64 reserved_896_959 : 64;
+ u64 reserved_960_1023 : 64;
+ } s;
+ /* struct nix_rq_ctx_s_s cn; */
+};
+
+/**
+ * Structure nix_rsse_s
+ *
+ * NIX Receive Side Scaling Entry Structure This structure specifies the
+ * format of each hardware entry in the NIX RSS tables in NDC/LLC/DRAM.
+ * See NIX_AF_LF()_RSS_BASE and NIX_AF_LF()_RSS_GRP(). Software uses the
+ * same structure format to read and write an RSS table entry with the
+ * NIX admin queue.
+ */
+union nix_rsse_s {
+ u32 u;
+ struct nix_rsse_s_s {
+ u32 rq : 20;
+ u32 reserved_20_31 : 12;
+ } s;
+ /* struct nix_rsse_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_action_s
+ *
+ * NIX Receive Action Structure This structure defines the format of
+ * NPC_RESULT_S[ACTION] for a receive packet.
+ */
+union nix_rx_action_s {
+ u64 u;
+ struct nix_rx_action_s_s {
+ u64 op : 4;
+ u64 pf_func : 16;
+ u64 index : 20;
+ u64 match_id : 16;
+ u64 flow_key_alg : 5;
+ u64 reserved_61_63 : 3;
+ } s;
+ /* struct nix_rx_action_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_imm_s
+ *
+ * NIX Receive Immediate Subdescriptor Structure The receive immediate
+ * subdescriptor indicates that bytes immediately following this
+ * NIX_RX_IMM_S (after skipping [APAD] bytes) were saved from the
+ * received packet. The next subdescriptor following this NIX_RX_IMM_S
+ * (when one exists) will follow the immediate bytes, after rounding up
+ * the address to a multiple of 16 bytes.
+ */
+union nix_rx_imm_s {
+ u64 u;
+ struct nix_rx_imm_s_s {
+ u64 size : 16;
+ u64 apad : 3;
+ u64 reserved_19_59 : 41;
+ u64 subdc : 4;
+ } s;
+ /* struct nix_rx_imm_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_mce_s
+ *
+ * NIX Receive Multicast/Mirror Entry Structure This structure specifies
+ * the format of entries in the NIX receive multicast/mirror table
+ * maintained by hardware in NDC/LLC/DRAM. See NIX_AF_RX_MCAST_BASE and
+ * NIX_AF_RX_MCAST_CFG. Note the table may contain both multicast and
+ * mirror replication lists. Software uses the same structure format to
+ * read and write a multicast/mirror table entry with the NIX admin
+ * queue.
+ */
+union nix_rx_mce_s {
+ u64 u;
+ struct nix_rx_mce_s_s {
+ u64 op : 2;
+ u64 reserved_2 : 1;
+ u64 eol : 1;
+ u64 index : 20;
+ u64 reserved_24_31 : 8;
+ u64 pf_func : 16;
+ u64 next : 16;
+ } s;
+ /* struct nix_rx_mce_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_parse_s
+ *
+ * NIX Receive Parse Structure This structure contains the receive packet
+ * parse result. It immediately follows NIX_CQE_HDR_S in a receive CQE,
+ * or NIX_WQE_HDR_S in a receive WQE. Stored in memory as little-endian
+ * unless NIX_AF_LF()_CFG[BE] is set. Header layers are always 2-byte
+ * aligned, so all header pointers in this structure ([EOH_PTR], [LAPTR]
+ * through [LHPTR], [VTAG*_PTR]) are even.
+ */
+union nix_rx_parse_s {
+ u64 u[7];
+ struct nix_rx_parse_s_s {
+ u64 chan : 12;
+ u64 desc_sizem1 : 5;
+ u64 imm_copy : 1;
+ u64 express : 1;
+ u64 wqwd : 1;
+ u64 errlev : 4;
+ u64 errcode : 8;
+ u64 latype : 4;
+ u64 lbtype : 4;
+ u64 lctype : 4;
+ u64 ldtype : 4;
+ u64 letype : 4;
+ u64 lftype : 4;
+ u64 lgtype : 4;
+ u64 lhtype : 4;
+ u64 pkt_lenm1 : 16;
+ u64 l2m : 1;
+ u64 l2b : 1;
+ u64 l3m : 1;
+ u64 l3b : 1;
+ u64 vtag0_valid : 1;
+ u64 vtag0_gone : 1;
+ u64 vtag1_valid : 1;
+ u64 vtag1_gone : 1;
+ u64 pkind : 6;
+ u64 reserved_94_95 : 2;
+ u64 vtag0_tci : 16;
+ u64 vtag1_tci : 16;
+ u64 laflags : 8;
+ u64 lbflags : 8;
+ u64 lcflags : 8;
+ u64 ldflags : 8;
+ u64 leflags : 8;
+ u64 lfflags : 8;
+ u64 lgflags : 8;
+ u64 lhflags : 8;
+ u64 eoh_ptr : 8;
+ u64 wqe_aura : 20;
+ u64 pb_aura : 20;
+ u64 match_id : 16;
+ u64 laptr : 8;
+ u64 lbptr : 8;
+ u64 lcptr : 8;
+ u64 ldptr : 8;
+ u64 leptr : 8;
+ u64 lfptr : 8;
+ u64 lgptr : 8;
+ u64 lhptr : 8;
+ u64 vtag0_ptr : 8;
+ u64 vtag1_ptr : 8;
+ u64 flow_key_alg : 5;
+ u64 reserved_341_383 : 43;
+ u64 reserved_384_447 : 64;
+ } s;
+ /* struct nix_rx_parse_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_sg_s
+ *
+ * NIX Receive Scatter/Gather Subdescriptor Structure The receive
+ * scatter/gather subdescriptor specifies one to three segments of packet
+ * data bytes. There may be multiple NIX_RX_SG_Ss in each NIX receive
+ * descriptor. NIX_RX_SG_S is immediately followed by one NIX_IOVA_S
+ * word when [SEGS] = 1, three NIX_IOVA_S words when [SEGS] \>= 2. Each
+ * NIX_IOVA_S word specifies the LF IOVA of first packet data byte in the
+ * corresponding segment; first NIX_IOVA_S word for segment 1, second
+ * word for segment 2, third word for segment 3. Note the third word is
+ * present when [SEGS] \>= 2 but only valid when [SEGS] = 3.
+ */
+union nix_rx_sg_s {
+ u64 u;
+ struct nix_rx_sg_s_s {
+ u64 seg1_size : 16;
+ u64 seg2_size : 16;
+ u64 seg3_size : 16;
+ u64 segs : 2;
+ u64 reserved_50_59 : 10;
+ u64 subdc : 4;
+ } s;
+ /* struct nix_rx_sg_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_vtag_action_s
+ *
+ * NIX Receive Vtag Action Structure This structure defines the format of
+ * NPC_RESULT_S[VTAG_ACTION] for a receive packet. It specifies up to two
+ * Vtags (e.g. C-VLAN/S-VLAN tags, 802.1BR E-TAG) for optional capture
+ * and/or stripping.
+ */
+union nix_rx_vtag_action_s {
+ u64 u;
+ struct nix_rx_vtag_action_s_s {
+ u64 vtag0_relptr : 8;
+ u64 vtag0_lid : 3;
+ u64 reserved_11 : 1;
+ u64 vtag0_type : 3;
+ u64 vtag0_valid : 1;
+ u64 reserved_16_31 : 16;
+ u64 vtag1_relptr : 8;
+ u64 vtag1_lid : 3;
+ u64 reserved_43 : 1;
+ u64 vtag1_type : 3;
+ u64 vtag1_valid : 1;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nix_rx_vtag_action_s_s cn; */
+};
+
+/**
+ * Structure nix_send_comp_s
+ *
+ * NIX Send Completion Structure This structure immediately follows
+ * NIX_CQE_HDR_S in a send completion CQE.
+ */
+union nix_send_comp_s {
+ u64 u;
+ struct nix_send_comp_s_s {
+ u64 status : 8;
+ u64 sqe_id : 16;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nix_send_comp_s_s cn; */
+};
+
+/**
+ * Structure nix_send_crc_s
+ *
+ * NIX Send CRC Subdescriptor Structure The send CRC subdescriptor
+ * specifies a CRC calculation be performed during transmission. Ignored
+ * when present in a send descriptor with NIX_SEND_EXT_S[LSO] set. There
+ * may be up to two NIX_SEND_CRC_Ss per send descriptor. NIX_SEND_CRC_S
+ * constraints: * When present, NIX_SEND_CRC_S subdescriptors must
+ * precede all NIX_SEND_SG_S, NIX_SEND_IMM_S and NIX_SEND_MEM_S
+ * subdescriptors in the send descriptor. * NIX_SEND_CRC_S subdescriptors
+ * must follow the same order as their checksum and insert regions in the
+ * packet, i.e. the checksum and insert regions of a NIX_SEND_CRC_S must
+ * come after the checksum and insert regions of a preceding
+ * NIX_SEND_CRC_S. There must be no overlap between any NIX_SEND_CRC_S
+ * checksum and insert regions. * If either
+ * NIX_SEND_HDR_S[OL4TYPE,IL4TYPE] = NIX_SENDL4TYPE_E::SCTP_CKSUM, the
+ * SCTP checksum region and NIX_SEND_CRC_S insert region must not
+ * overlap, and likewise the NIX_SEND_CRC_S checksum region and SCTP
+ * insert region must not overlap. * If either
+ * NIX_SEND_HDR_S[OL3TYPE,IL3TYPE] = NIX_SENDL3TYPE_E::IP4_CKSUM, the
+ * IPv4 header checksum region and NIX_SEND_CRC_S insert region must not
+ * overlap. * Any checksums inserted by
+ * NIX_SEND_HDR_S[OL3TYPE,OL4TYPE,IL3TYPE,IL4TYPE] must be outside of the
+ * NIX_SEND_CRC_S checksum and insert regions. Hardware adjusts [START],
+ * [SIZE] and [INSERT] as needed to account for any VLAN inserted by
+ * NIX_SEND_EXT_S[VLAN*] or Vtag inserted by NIX_TX_VTAG_ACTION_S.
+ */
+union nix_send_crc_s {
+ u64 u[2];
+ struct nix_send_crc_s_s {
+ u64 size : 16;
+ u64 start : 16;
+ u64 insert : 16;
+ u64 reserved_48_57 : 10;
+ u64 alg : 2;
+ u64 subdc : 4;
+ u64 iv : 32;
+ u64 reserved_96_127 : 32;
+ } s;
+ /* struct nix_send_crc_s_s cn; */
+};
+
+/**
+ * Structure nix_send_ext_s
+ *
+ * NIX Send Extended Header Subdescriptor Structure The send extended
+ * header specifies LSO, VLAN insertion, timestamp and/or scheduling
+ * services on the packet. If present, it must immediately follow
+ * NIX_SEND_HDR_S. All fields are assumed to be zero when this
+ * subdescriptor is not present.
+ */
+union nix_send_ext_s {
+ u64 u[2];
+ struct nix_send_ext_s_s {
+ u64 lso_mps : 14;
+ u64 lso : 1;
+ u64 tstmp : 1;
+ u64 lso_sb : 8;
+ u64 lso_format : 5;
+ u64 reserved_29_31 : 3;
+ u64 shp_chg : 9;
+ u64 shp_dis : 1;
+ u64 shp_ra : 2;
+ u64 markptr : 8;
+ u64 markform : 7;
+ u64 mark_en : 1;
+ u64 subdc : 4;
+ u64 vlan0_ins_ptr : 8;
+ u64 vlan0_ins_tci : 16;
+ u64 vlan1_ins_ptr : 8;
+ u64 vlan1_ins_tci : 16;
+ u64 vlan0_ins_ena : 1;
+ u64 vlan1_ins_ena : 1;
+ u64 reserved_114_127 : 14;
+ } s;
+ /* struct nix_send_ext_s_s cn; */
+};
+
+/**
+ * Structure nix_send_hdr_s
+ *
+ * NIX Send Header Subdescriptor Structure The send header is the first
+ * subdescriptor of every send descriptor.
+ */
+union nix_send_hdr_s {
+ u64 u[2];
+ struct nix_send_hdr_s_s {
+ u64 total : 18;
+ u64 reserved_18 : 1;
+ u64 df : 1;
+ u64 aura : 20;
+ u64 sizem1 : 3;
+ u64 pnc : 1;
+ u64 sq : 20;
+ u64 ol3ptr : 8;
+ u64 ol4ptr : 8;
+ u64 il3ptr : 8;
+ u64 il4ptr : 8;
+ u64 ol3type : 4;
+ u64 ol4type : 4;
+ u64 il3type : 4;
+ u64 il4type : 4;
+ u64 sqe_id : 16;
+ } s;
+ /* struct nix_send_hdr_s_s cn; */
+};
+
+/**
+ * Structure nix_send_imm_s
+ *
+ * NIX Send Immediate Subdescriptor Structure The send immediate
+ * subdescriptor requests that bytes immediately following this
+ * NIX_SEND_IMM_S (after skipping [APAD] bytes) are to be included in the
+ * packet data. The next subdescriptor following this NIX_SEND_IMM_S
+ * (when one exists) will follow the immediate bytes, after rounding up
+ * the address to a multiple of 16 bytes. There may be multiple
+ * NIX_SEND_IMM_S in one NIX send descriptor. A NIX_SEND_IMM_S is ignored
+ * in a NIX send descriptor if the sum of all prior
+ * NIX_SEND_SG_S[SEG*_SIZE]s and NIX_SEND_IMM_S[SIZE]s meets or exceeds
+ * NIX_SEND_HDR_S[TOTAL]. When NIX_SEND_EXT_S[LSO] is set in the
+ * descriptor, all NIX_SEND_IMM_S bytes must be included in the first
+ * NIX_SEND_EXT_S[LSO_SB] bytes of the source packet.
+ */
+union nix_send_imm_s {
+ u64 u;
+ struct nix_send_imm_s_s {
+ u64 size : 16;
+ u64 apad : 3;
+ u64 reserved_19_59 : 41;
+ u64 subdc : 4;
+ } s;
+ /* struct nix_send_imm_s_s cn; */
+};
+
+/**
+ * Structure nix_send_jump_s
+ *
+ * NIX Send Jump Subdescriptor Structure The send jump subdescriptor
+ * selects a new address for fetching the remaining subdescriptors of a
+ * send descriptor. This allows software to create a send descriptor
+ * longer than SQE size selected by NIX_SQ_CTX_S[MAX_SQE_SIZE]. There
+ * can be only one NIX_SEND_JUMP_S subdescriptor in a send descriptor. If
+ * present, it must immediately follow NIX_SEND_HDR_S if NIX_SEND_EXT_S
+ * is not present, else it must immediately follow NIX_SEND_EXT_S. In
+ * either case, it must terminate the SQE enqueued by software.
+ */
+union nix_send_jump_s {
+ u64 u[2];
+ struct nix_send_jump_s_s {
+ u64 sizem1 : 7;
+ u64 reserved_7_13 : 7;
+ u64 ld_type : 2;
+ u64 aura : 20;
+ u64 reserved_36_58 : 23;
+ u64 f : 1;
+ u64 subdc : 4;
+ u64 addr : 64;
+ } s;
+ /* struct nix_send_jump_s_s cn; */
+};
+
+/**
+ * Structure nix_send_mem_s
+ *
+ * NIX Send Memory Subdescriptor Structure The send memory subdescriptor
+ * atomically sets, increments or decrements a memory location.
+ * NIX_SEND_MEM_S subdescriptors must follow all NIX_SEND_SG_S and
+ * NIX_SEND_IMM_S subdescriptors in the NIX send descriptor. NIX will not
+ * initiate the memory update for this subdescriptor until after it has
+ * completed all LLC/DRAM fetches that service all prior NIX_SEND_SG_S
+ * subdescriptors. The memory update is executed once, even if the packet
+ * is replicated due to NIX_TX_ACTION_S[OP] = NIX_TX_ACTIONOP_E::MCAST.
+ * Performance is best if a memory decrement by one is used rather than
+ * any other memory set/increment/decrement. (Less internal bus bandwidth
+ * is used with memory decrements by one.) When NIX_SEND_EXT_S[LSO] is
+ * set in the descriptor, NIX executes the memory update only while
+ * processing the last LSO segment, after processing prior segments.
+ */
+union nix_send_mem_s {
+ u64 u[2];
+ struct nix_send_mem_s_s {
+ u64 offset : 16;
+ u64 reserved_16_52 : 37;
+ u64 wmem : 1;
+ u64 dsz : 2;
+ u64 alg : 4;
+ u64 subdc : 4;
+ u64 addr : 64;
+ } s;
+ /* struct nix_send_mem_s_s cn; */
+};
+
+/**
+ * Structure nix_send_sg_s
+ *
+ * NIX Send Scatter/Gather Subdescriptor Structure The send
+ * scatter/gather subdescriptor requests one to three segments of packet
+ * data bytes to be transmitted. There may be multiple NIX_SEND_SG_Ss in
+ * each NIX send descriptor. NIX_SEND_SG_S is immediately followed by
+ * one NIX_IOVA_S word when [SEGS] = 1, three NIX_IOVA_S words when
+ * [SEGS] \>= 2. Each NIX_IOVA_S word specifies the LF IOVA of first
+ * packet data byte in the corresponding segment; first NIX_IOVA_S word
+ * for segment 1, second word for segment 2, third word for segment 3.
+ * Note the third word is present when [SEGS] \>= 2 but only valid when
+ * [SEGS] = 3. If the sum of all prior NIX_SEND_SG_S[SEG*_SIZE]s and
+ * NIX_SEND_IMM_S[SIZE]s meets or exceeds NIX_SEND_HDR_S[TOTAL], this
+ * subdescriptor will not contribute any packet data but may free buffers
+ * to NPA (see [I1]).
+ */
+union nix_send_sg_s {
+ u64 u;
+ struct nix_send_sg_s_s {
+ u64 seg1_size : 16;
+ u64 seg2_size : 16;
+ u64 seg3_size : 16;
+ u64 segs : 2;
+ u64 reserved_50_54 : 5;
+ u64 i1 : 1;
+ u64 i2 : 1;
+ u64 i3 : 1;
+ u64 ld_type : 2;
+ u64 subdc : 4;
+ } s;
+ /* struct nix_send_sg_s_s cn; */
+};
+
+/**
+ * Structure nix_send_work_s
+ *
+ * NIX Send Work Subdescriptor Structure This subdescriptor adds work to
+ * the SSO. At most one NIX_SEND_WORK_S subdescriptor can exist in the
+ * NIX send descriptor. If a NIX_SEND_WORK_S exists in the descriptor, it
+ * must be the last subdescriptor. NIX will not initiate the work add for
+ * this subdescriptor until after (1) it has completed all LLC/DRAM
+ * fetches that service all prior NIX_SEND_SG_S subdescriptors, (2) it
+ * has fetched all subdescriptors in the descriptor, and (3) all
+ * NIX_SEND_MEM_S[WMEM]=1 LLC/DRAM updates have completed. Provided the
+ * path of descriptors from the SQ through NIX to an output FIFO is
+ * unmodified between the descriptors (as should normally be the case,
+ * but it is possible for software to change the path), NIX also (1) will
+ * submit the SSO add works from all descriptors in the SQ in order, and
+ * (2) will not submit an SSO work add until after all prior descriptors
+ * in the SQ have completed their NIX_SEND_SG_S processing, and (3) will
+ * not submit an SSO work add until after it has fetched all
+ * subdescriptors from prior descriptors in the SQ. When
+ * NIX_SEND_EXT_S[LSO] is set in the descriptor, NIX executes the
+ * NIX_SEND_WORK_S work add only while processing the last LSO segment,
+ * after processing prior segments. Hardware ignores NIX_SEND_WORK_S
+ * when NIX_SQ_CTX_S[SSO_ENA] is clear.
+ */
+union nix_send_work_s {
+ u64 u[2];
+ struct nix_send_work_s_s {
+ u64 tag : 32;
+ u64 tt : 2;
+ u64 grp : 10;
+ u64 reserved_44_59 : 16;
+ u64 subdc : 4;
+ u64 addr : 64;
+ } s;
+ /* struct nix_send_work_s_s cn; */
+};
+
+/**
+ * Structure nix_sq_ctx_hw_s
+ *
+ * NIX SQ Context Hardware Structure This structure contains context
+ * state maintained by hardware for each SQ in NDC/LLC/DRAM. Software
+ * uses the equivalent NIX_SQ_CTX_S structure format to read and write an
+ * SQ context with the NIX admin queue. Always stored in byte invariant
+ * little-endian format (LE8).
+ */
+union nix_sq_ctx_hw_s {
+ u64 u[16];
+ struct nix_sq_ctx_hw_s_s {
+ u64 ena : 1;
+ u64 substream : 20;
+ u64 max_sqe_size : 2;
+ u64 sqe_way_mask : 16;
+ u64 sqb_aura : 20;
+ u64 gbl_rsvd1 : 5;
+ u64 cq_id : 20;
+ u64 cq_ena : 1;
+ u64 qint_idx : 6;
+ u64 gbl_rsvd2 : 1;
+ u64 sq_int : 8;
+ u64 sq_int_ena : 8;
+ u64 xoff : 1;
+ u64 sqe_stype : 2;
+ u64 gbl_rsvd : 17;
+ u64 head_sqb : 64;
+ u64 head_offset : 6;
+ u64 sqb_dequeue_count : 16;
+ u64 default_chan : 12;
+ u64 sdp_mcast : 1;
+ u64 sso_ena : 1;
+ u64 dse_rsvd1 : 28;
+ u64 sqb_enqueue_count : 16;
+ u64 tail_offset : 6;
+ u64 lmt_dis : 1;
+ u64 smq_rr_quantum : 24;
+ u64 dnq_rsvd1 : 17;
+ u64 tail_sqb : 64;
+ u64 next_sqb : 64;
+ u64 mnq_dis : 1;
+ u64 smq : 9;
+ u64 smq_pend : 1;
+ u64 smq_next_sq : 20;
+ u64 smq_next_sq_vld : 1;
+ u64 scm1_rsvd2 : 32;
+ u64 smenq_sqb : 64;
+ u64 smenq_offset : 6;
+ u64 cq_limit : 8;
+ u64 smq_rr_count : 25;
+ u64 scm_lso_rem : 18;
+ u64 scm_dq_rsvd0 : 7;
+ u64 smq_lso_segnum : 8;
+ u64 vfi_lso_total : 18;
+ u64 vfi_lso_sizem1 : 3;
+ u64 vfi_lso_sb : 8;
+ u64 vfi_lso_mps : 14;
+ u64 vfi_lso_vlan0_ins_ena : 1;
+ u64 vfi_lso_vlan1_ins_ena : 1;
+ u64 vfi_lso_vld : 1;
+ u64 smenq_next_sqb_vld : 1;
+ u64 scm_dq_rsvd1 : 9;
+ u64 smenq_next_sqb : 64;
+ u64 seb_rsvd1 : 64;
+ u64 drop_pkts : 48;
+ u64 drop_octs_lsw : 16;
+ u64 drop_octs_msw : 32;
+ u64 pkts_lsw : 32;
+ u64 pkts_msw : 16;
+ u64 octs : 48;
+ } s;
+ /* struct nix_sq_ctx_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_sq_ctx_s
+ *
+ * NIX Send Queue Context Structure This structure specifies the format
+ * used by software with the NIX admin queue to read and write a send
+ * queue's NIX_SQ_CTX_HW_S structure maintained by hardware in
+ * NDC/LLC/DRAM. The SQ statistics ([OCTS], [PKTS], [DROP_OCTS],
+ * [DROP_PKTS]) do not account for packet replication due to
+ * NIX_TX_ACTION_S[OP] = NIX_TX_ACTIONOP_E::MCAST.
+ */
+union nix_sq_ctx_s {
+ u64 u[16];
+ struct nix_sq_ctx_s_s {
+ u64 ena : 1;
+ u64 qint_idx : 6;
+ u64 substream : 20;
+ u64 sdp_mcast : 1;
+ u64 cq : 20;
+ u64 sqe_way_mask : 16;
+ u64 smq : 9;
+ u64 cq_ena : 1;
+ u64 xoff : 1;
+ u64 sso_ena : 1;
+ u64 smq_rr_quantum : 24;
+ u64 default_chan : 12;
+ u64 sqb_count : 16;
+ u64 smq_rr_count : 25;
+ u64 sqb_aura : 20;
+ u64 sq_int : 8;
+ u64 sq_int_ena : 8;
+ u64 sqe_stype : 2;
+ u64 reserved_191 : 1;
+ u64 max_sqe_size : 2;
+ u64 cq_limit : 8;
+ u64 lmt_dis : 1;
+ u64 mnq_dis : 1;
+ u64 smq_next_sq : 20;
+ u64 smq_lso_segnum : 8;
+ u64 tail_offset : 6;
+ u64 smenq_offset : 6;
+ u64 head_offset : 6;
+ u64 smenq_next_sqb_vld : 1;
+ u64 smq_pend : 1;
+ u64 smq_next_sq_vld : 1;
+ u64 reserved_253_255 : 3;
+ u64 next_sqb : 64;
+ u64 tail_sqb : 64;
+ u64 smenq_sqb : 64;
+ u64 smenq_next_sqb : 64;
+ u64 head_sqb : 64;
+ u64 reserved_576_583 : 8;
+ u64 vfi_lso_total : 18;
+ u64 vfi_lso_sizem1 : 3;
+ u64 vfi_lso_sb : 8;
+ u64 vfi_lso_mps : 14;
+ u64 vfi_lso_vlan0_ins_ena : 1;
+ u64 vfi_lso_vlan1_ins_ena : 1;
+ u64 vfi_lso_vld : 1;
+ u64 reserved_630_639 : 10;
+ u64 scm_lso_rem : 18;
+ u64 reserved_658_703 : 46;
+ u64 octs : 48;
+ u64 reserved_752_767 : 16;
+ u64 pkts : 48;
+ u64 reserved_816_831 : 16;
+ u64 reserved_832_895 : 64;
+ u64 drop_octs : 48;
+ u64 reserved_944_959 : 16;
+ u64 drop_pkts : 48;
+ u64 reserved_1008_1023 : 16;
+ } s;
+ /* struct nix_sq_ctx_s_s cn; */
+};
+
+/**
+ * Structure nix_tx_action_s
+ *
+ * NIX Transmit Action Structure This structure defines the format of
+ * NPC_RESULT_S[ACTION] for a transmit packet.
+ */
+union nix_tx_action_s {
+ u64 u;
+ struct nix_tx_action_s_s {
+ u64 op : 4;
+ u64 reserved_4_11 : 8;
+ u64 index : 20;
+ u64 match_id : 16;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nix_tx_action_s_s cn; */
+};
+
+/**
+ * Structure nix_tx_vtag_action_s
+ *
+ * NIX Transmit Vtag Action Structure This structure defines the format
+ * of NPC_RESULT_S[VTAG_ACTION] for a transmit packet. It specifies the
+ * optional insertion or replacement of up to two Vtags (e.g.
+ * C-VLAN/S-VLAN tags, 802.1BR E-TAG). If two Vtags are specified: * The
+ * Vtag 0 byte offset from packet start (see [VTAG0_RELPTR]) must be less
+ * than or equal to the Vtag 1 byte offset. * Hardware executes the Vtag
+ * 0 action first, Vtag 1 action second. * If Vtag 0 is inserted,
+ * hardware adjusts the Vtag 1 byte offset accordingly. Thus, if the two
+ * offsets are equal in the structure, hardware inserts Vtag 1
+ * immediately after Vtag 0 in the packet. A Vtag must not be inserted
+ * or replaced within an outer or inner L3/L4 header, but may be inserted
+ * or replaced within an outer L4 payload.
+ */
+union nix_tx_vtag_action_s {
+ u64 u;
+ struct nix_tx_vtag_action_s_s {
+ u64 vtag0_relptr : 8;
+ u64 vtag0_lid : 3;
+ u64 reserved_11 : 1;
+ u64 vtag0_op : 2;
+ u64 reserved_14_15 : 2;
+ u64 vtag0_def : 10;
+ u64 reserved_26_31 : 6;
+ u64 vtag1_relptr : 8;
+ u64 vtag1_lid : 3;
+ u64 reserved_43 : 1;
+ u64 vtag1_op : 2;
+ u64 reserved_46_47 : 2;
+ u64 vtag1_def : 10;
+ u64 reserved_58_63 : 6;
+ } s;
+ /* struct nix_tx_vtag_action_s_s cn; */
+};
+
+/**
+ * Structure nix_wqe_hdr_s
+ *
+ * NIX Work Queue Entry Header Structure This 64-bit structure defines
+ * the first word of every receive WQE generated by NIX. It is
+ * immediately followed by NIX_RX_PARSE_S. Stored in memory as little-
+ * endian unless NIX_AF_LF()_CFG[BE] is set.
+ */
+union nix_wqe_hdr_s {
+ u64 u;
+ struct nix_wqe_hdr_s_s {
+ u64 tag : 32;
+ u64 tt : 2;
+ u64 grp : 10;
+ u64 node : 2;
+ u64 q : 14;
+ u64 wqe_type : 4;
+ } s;
+ /* struct nix_wqe_hdr_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_base
+ *
+ * NIX AF Admin Queue Base Address Register
+ */
+union nixx_af_aq_base {
+ u64 u;
+ struct nixx_af_aq_base_s {
+ u64 reserved_0_6 : 7;
+ u64 base_addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_aq_base_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_BASE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_BASE(void)
+{
+ return 0x410;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_cfg
+ *
+ * NIX AF Admin Queue Configuration Register
+ */
+union nixx_af_aq_cfg {
+ u64 u;
+ struct nixx_af_aq_cfg_s {
+ u64 qsize : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct nixx_af_aq_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_CFG(void)
+{
+ return 0x400;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done
+ *
+ * NIX AF Admin Queue Done Count Register
+ */
+union nixx_af_aq_done {
+ u64 u;
+ struct nixx_af_aq_done_s {
+ u64 done : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct nixx_af_aq_done_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE(void)
+{
+ return 0x450;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_ack
+ *
+ * NIX AF Admin Queue Done Count Ack Register This register is written by
+ * software to acknowledge interrupts.
+ */
+union nixx_af_aq_done_ack {
+ u64 u;
+ struct nixx_af_aq_done_ack_s {
+ u64 done_ack : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct nixx_af_aq_done_ack_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_ACK(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_ACK(void)
+{
+ return 0x460;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_ena_w1c
+ *
+ * NIX AF Admin Queue Done Interrupt Enable Clear Register
+ */
+union nixx_af_aq_done_ena_w1c {
+ u64 u;
+ struct nixx_af_aq_done_ena_w1c_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_aq_done_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1C(void)
+{
+ return 0x498;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_ena_w1s
+ *
+ * NIX AF Admin Queue Done Interrupt Enable Set Register
+ */
+union nixx_af_aq_done_ena_w1s {
+ u64 u;
+ struct nixx_af_aq_done_ena_w1s_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_aq_done_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1S(void)
+{
+ return 0x490;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_int
+ *
+ * INTERNAL: NIX AF Admin Queue Done Interrupt Register
+ */
+union nixx_af_aq_done_int {
+ u64 u;
+ struct nixx_af_aq_done_int_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_aq_done_int_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_INT(void)
+{
+ return 0x480;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_int_w1s
+ *
+ * INTERNAL: NIX AF Admin Queue Done Interrupt Set Register
+ */
+union nixx_af_aq_done_int_w1s {
+ u64 u;
+ struct nixx_af_aq_done_int_w1s_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_aq_done_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_INT_W1S(void)
+{
+ return 0x488;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_timer
+ *
+ * NIX AF Admin Queue Done Interrupt Timer Register
+ */
+union nixx_af_aq_done_timer {
+ u64 u;
+ struct nixx_af_aq_done_timer_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_aq_done_timer_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_TIMER(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_TIMER(void)
+{
+ return 0x470;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_wait
+ *
+ * NIX AF Admin Queue Done Interrupt Coalescing Wait Register Specifies
+ * the queue interrupt coalescing settings.
+ */
+union nixx_af_aq_done_wait {
+ u64 u;
+ struct nixx_af_aq_done_wait_s {
+ u64 num_wait : 20;
+ u64 reserved_20_31 : 12;
+ u64 time_wait : 16;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_aq_done_wait_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_WAIT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_WAIT(void)
+{
+ return 0x440;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_door
+ *
+ * NIX AF Admin Queue Doorbell Register Software writes to this register
+ * to enqueue entries to AQ.
+ */
+union nixx_af_aq_door {
+ u64 u;
+ struct nixx_af_aq_door_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_aq_door_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DOOR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DOOR(void)
+{
+ return 0x430;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_status
+ *
+ * NIX AF Admin Queue Status Register
+ */
+union nixx_af_aq_status {
+ u64 u;
+ struct nixx_af_aq_status_s {
+ u64 reserved_0_3 : 4;
+ u64 head_ptr : 20;
+ u64 reserved_24_35 : 12;
+ u64 tail_ptr : 20;
+ u64 reserved_56_61 : 6;
+ u64 aq_busy : 1;
+ u64 aq_err : 1;
+ } s;
+ struct nixx_af_aq_status_cn {
+ u64 reserved_0_3 : 4;
+ u64 head_ptr : 20;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_35 : 4;
+ u64 tail_ptr : 20;
+ u64 reserved_56_61 : 6;
+ u64 aq_busy : 1;
+ u64 aq_err : 1;
+ } cn;
+};
+
+static inline u64 NIXX_AF_AQ_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_STATUS(void)
+{
+ return 0x420;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_avg_delay
+ *
+ * NIX AF Queue Average Delay Register
+ */
+union nixx_af_avg_delay {
+ u64 u;
+ struct nixx_af_avg_delay_s {
+ u64 avg_dly : 19;
+ u64 reserved_19_23 : 5;
+ u64 avg_timer : 16;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_avg_delay_s cn; */
+};
+
+static inline u64 NIXX_AF_AVG_DELAY(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AVG_DELAY(void)
+{
+ return 0xe0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_bar2_alias#
+ *
+ * NIX Admin Function BAR2 Alias Registers These registers alias to the
+ * NIX BAR2 registers for the PF and function selected by
+ * NIX_AF_BAR2_SEL[PF_FUNC]. Internal: Not implemented. Placeholder for
+ * bug33464.
+ */
+union nixx_af_bar2_aliasx {
+ u64 u;
+ struct nixx_af_bar2_aliasx_s {
+ u64 data : 64;
+ } s;
+ /* struct nixx_af_bar2_aliasx_s cn; */
+};
+
+static inline u64 NIXX_AF_BAR2_ALIASX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_BAR2_ALIASX(u64 a)
+{
+ return 0x9100000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_bar2_sel
+ *
+ * NIX Admin Function BAR2 Select Register This register configures BAR2
+ * accesses from the NIX_AF_BAR2_ALIAS() registers in BAR0. Internal: Not
+ * implemented. Placeholder for bug33464.
+ */
+union nixx_af_bar2_sel {
+ u64 u;
+ struct nixx_af_bar2_sel_s {
+ u64 alias_pf_func : 16;
+ u64 alias_ena : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct nixx_af_bar2_sel_s cn; */
+};
+
+static inline u64 NIXX_AF_BAR2_SEL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_BAR2_SEL(void)
+{
+ return 0x9000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_blk_rst
+ *
+ * NIX AF Block Reset Register
+ */
+union nixx_af_blk_rst {
+ u64 u;
+ struct nixx_af_blk_rst_s {
+ u64 rst : 1;
+ u64 reserved_1_62 : 62;
+ u64 busy : 1;
+ } s;
+ /* struct nixx_af_blk_rst_s cn; */
+};
+
+static inline u64 NIXX_AF_BLK_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_BLK_RST(void)
+{
+ return 0xb0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cfg
+ *
+ * NIX AF General Configuration Register
+ */
+union nixx_af_cfg {
+ u64 u;
+ struct nixx_af_cfg_s {
+ u64 force_cond_clk_en : 1;
+ u64 force_rx_gbl_clk_en : 1;
+ u64 force_rx_strm_clk_en : 1;
+ u64 force_cqm_clk_en : 1;
+ u64 force_seb_clk_en : 1;
+ u64 force_sqm_clk_en : 1;
+ u64 force_pse_clk_en : 1;
+ u64 reserved_7 : 1;
+ u64 af_be : 1;
+ u64 calibrate_x2p : 1;
+ u64 force_intf_clk_en : 1;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CFG(void)
+{
+ return 0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cint_delay
+ *
+ * NIX AF Completion Interrupt Delay Register
+ */
+union nixx_af_cint_delay {
+ u64 u;
+ struct nixx_af_cint_delay_s {
+ u64 cint_dly : 10;
+ u64 reserved_10_15 : 6;
+ u64 cint_timer : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct nixx_af_cint_delay_s cn; */
+};
+
+static inline u64 NIXX_AF_CINT_DELAY(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CINT_DELAY(void)
+{
+ return 0xf0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cint_timer#
+ *
+ * NIX AF Completion Interrupt Timer Registers
+ */
+union nixx_af_cint_timerx {
+ u64 u;
+ struct nixx_af_cint_timerx_s {
+ u64 expir_time : 16;
+ u64 cint : 7;
+ u64 reserved_23 : 1;
+ u64 lf : 8;
+ u64 active : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct nixx_af_cint_timerx_s cn; */
+};
+
+static inline u64 NIXX_AF_CINT_TIMERX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CINT_TIMERX(u64 a)
+{
+ return 0x1a40 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const
+ *
+ * NIX AF Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const {
+ u64 u;
+ struct nixx_af_const_s {
+ u64 cgx_lmac_channels : 8;
+ u64 cgx_lmacs : 4;
+ u64 num_cgx : 4;
+ u64 lbk_channels : 8;
+ u64 num_lbk : 4;
+ u64 num_sdp : 4;
+ u64 reserved_32_47 : 16;
+ u64 links : 8;
+ u64 intfs : 4;
+ u64 reserved_60_63 : 4;
+ } s;
+ /* struct nixx_af_const_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const1
+ *
+ * NIX AF Constants 1 Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const1 {
+ u64 u;
+ struct nixx_af_const1_s {
+ u64 sdp_channels : 12;
+ u64 rx_bpids : 12;
+ u64 lf_tx_stats : 8;
+ u64 lf_rx_stats : 8;
+ u64 lso_format_fields : 8;
+ u64 lso_formats : 8;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct nixx_af_const1_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST1(void)
+{
+ return 0x28;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const2
+ *
+ * NIX AF Constants 2 Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const2 {
+ u64 u;
+ struct nixx_af_const2_s {
+ u64 lfs : 12;
+ u64 qints : 12;
+ u64 cints : 12;
+ u64 reserved_36_63 : 28;
+ } s;
+ /* struct nixx_af_const2_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST2(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST2(void)
+{
+ return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const3
+ *
+ * NIX AF Constants 2 Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const3 {
+ u64 u;
+ struct nixx_af_const3_s {
+ u64 sq_ctx_log2bytes : 4;
+ u64 rq_ctx_log2bytes : 4;
+ u64 cq_ctx_log2bytes : 4;
+ u64 rsse_log2bytes : 4;
+ u64 mce_log2bytes : 4;
+ u64 qint_log2bytes : 4;
+ u64 cint_log2bytes : 4;
+ u64 dyno_log2bytes : 4;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct nixx_af_const3_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST3(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST3(void)
+{
+ return 0x38;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cq_const
+ *
+ * NIX AF CQ Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_cq_const {
+ u64 u;
+ struct nixx_af_cq_const_s {
+ u64 queues_per_lf : 24;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_cq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_CQ_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CQ_CONST(void)
+{
+ return 0x48;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cqm_bp_test
+ *
+ * INTERNAL: NIX AF CQM Backpressure Test Registers
+ */
+union nixx_af_cqm_bp_test {
+ u64 u;
+ struct nixx_af_cqm_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 24;
+ u64 enable : 12;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct nixx_af_cqm_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_CQM_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CQM_BP_TEST(void)
+{
+ return 0x48c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cqm_eco
+ *
+ * INTERNAL: AF CQM ECO Register
+ */
+union nixx_af_cqm_eco {
+ u64 u;
+ struct nixx_af_cqm_eco_s {
+ u64 eco_rw : 64;
+ } s;
+ /* struct nixx_af_cqm_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_CQM_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CQM_ECO(void)
+{
+ return 0x590;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_csi_eco
+ *
+ * INTERNAL: AF CSI ECO Register
+ */
+union nixx_af_csi_eco {
+ u64 u;
+ struct nixx_af_csi_eco_s {
+ u64 eco_rw : 64;
+ } s;
+ /* struct nixx_af_csi_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_CSI_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CSI_ECO(void)
+{
+ return 0x580;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int
+ *
+ * NIX Admin Function Error Interrupt Register
+ */
+union nixx_af_err_int {
+ u64 u;
+ struct nixx_af_err_int_s {
+ u64 rx_mcast_data_fault : 1;
+ u64 rx_mirror_data_fault : 1;
+ u64 rx_mcast_wqe_fault : 1;
+ u64 rx_mirror_wqe_fault : 1;
+ u64 rx_mce_fault : 1;
+ u64 rx_mce_list_err : 1;
+ u64 rx_unmapped_pf_func : 1;
+ u64 reserved_7_11 : 5;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct nixx_af_err_int_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT(void)
+{
+ return 0x180;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int_ena_w1c
+ *
+ * NIX Admin Function Error Interrupt Enable Clear Register This register
+ * clears interrupt enable bits.
+ */
+union nixx_af_err_int_ena_w1c {
+ u64 u;
+ struct nixx_af_err_int_ena_w1c_s {
+ u64 rx_mcast_data_fault : 1;
+ u64 rx_mirror_data_fault : 1;
+ u64 rx_mcast_wqe_fault : 1;
+ u64 rx_mirror_wqe_fault : 1;
+ u64 rx_mce_fault : 1;
+ u64 rx_mce_list_err : 1;
+ u64 rx_unmapped_pf_func : 1;
+ u64 reserved_7_11 : 5;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct nixx_af_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT_ENA_W1C(void)
+{
+ return 0x198;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int_ena_w1s
+ *
+ * NIX Admin Function Error Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union nixx_af_err_int_ena_w1s {
+ u64 u;
+ struct nixx_af_err_int_ena_w1s_s {
+ u64 rx_mcast_data_fault : 1;
+ u64 rx_mirror_data_fault : 1;
+ u64 rx_mcast_wqe_fault : 1;
+ u64 rx_mirror_wqe_fault : 1;
+ u64 rx_mce_fault : 1;
+ u64 rx_mce_list_err : 1;
+ u64 rx_unmapped_pf_func : 1;
+ u64 reserved_7_11 : 5;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct nixx_af_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT_ENA_W1S(void)
+{
+ return 0x190;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int_w1s
+ *
+ * NIX Admin Function Error Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union nixx_af_err_int_w1s {
+ u64 u;
+ struct nixx_af_err_int_w1s_s {
+ u64 rx_mcast_data_fault : 1;
+ u64 rx_mirror_data_fault : 1;
+ u64 rx_mcast_wqe_fault : 1;
+ u64 rx_mirror_wqe_fault : 1;
+ u64 rx_mce_fault : 1;
+ u64 rx_mce_list_err : 1;
+ u64 rx_unmapped_pf_func : 1;
+ u64 reserved_7_11 : 5;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct nixx_af_err_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT_W1S(void)
+{
+ return 0x188;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_expr_tx_fifo_status
+ *
+ * INTERNAL: NIX AF Express Transmit FIFO Status Register Internal:
+ * 802.3br frame preemption/express path is defeatured. Old definition:
+ * Status of FIFO which transmits express packets to CGX and LBK.
+ */
+union nixx_af_expr_tx_fifo_status {
+ u64 u;
+ struct nixx_af_expr_tx_fifo_status_s {
+ u64 count : 12;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct nixx_af_expr_tx_fifo_status_s cn; */
+};
+
+static inline u64 NIXX_AF_EXPR_TX_FIFO_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_EXPR_TX_FIFO_STATUS(void)
+{
+ return 0x640;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int
+ *
+ * NIX AF General Interrupt Register
+ */
+union nixx_af_gen_int {
+ u64 u;
+ struct nixx_af_gen_int_s {
+ u64 rx_mcast_drop : 1;
+ u64 rx_mirror_drop : 1;
+ u64 reserved_2 : 1;
+ u64 tl1_drain : 1;
+ u64 smq_flush_done : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct nixx_af_gen_int_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT(void)
+{
+ return 0x160;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int_ena_w1c
+ *
+ * NIX AF General Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_af_gen_int_ena_w1c {
+ u64 u;
+ struct nixx_af_gen_int_ena_w1c_s {
+ u64 rx_mcast_drop : 1;
+ u64 rx_mirror_drop : 1;
+ u64 reserved_2 : 1;
+ u64 tl1_drain : 1;
+ u64 smq_flush_done : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct nixx_af_gen_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT_ENA_W1C(void)
+{
+ return 0x178;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int_ena_w1s
+ *
+ * NIX AF General Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union nixx_af_gen_int_ena_w1s {
+ u64 u;
+ struct nixx_af_gen_int_ena_w1s_s {
+ u64 rx_mcast_drop : 1;
+ u64 rx_mirror_drop : 1;
+ u64 reserved_2 : 1;
+ u64 tl1_drain : 1;
+ u64 smq_flush_done : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct nixx_af_gen_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT_ENA_W1S(void)
+{
+ return 0x170;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int_w1s
+ *
+ * NIX AF General Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union nixx_af_gen_int_w1s {
+ u64 u;
+ struct nixx_af_gen_int_w1s_s {
+ u64 rx_mcast_drop : 1;
+ u64 rx_mirror_drop : 1;
+ u64 reserved_2 : 1;
+ u64 tl1_drain : 1;
+ u64 smq_flush_done : 1;
+ u64 reserved_5_63 : 59;
+ } s;
+ /* struct nixx_af_gen_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT_W1S(void)
+{
+ return 0x168;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cfg
+ *
+ * NIX AF Local Function Configuration Registers
+ */
+union nixx_af_lfx_cfg {
+ u64 u;
+ struct nixx_af_lfx_cfg_s {
+ u64 npa_pf_func : 16;
+ u64 sso_pf_func : 16;
+ u64 be : 1;
+ u64 xqe_size : 2;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_lfx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CFG(u64 a)
+{
+ return 0x4000 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cints_base
+ *
+ * NIX AF Local Function Completion Interrupts Base Address Registers
+ * This register specifies the base AF IOVA of LF's completion interrupt
+ * context table in NDC/LLC/DRAM. The table consists of
+ * NIX_AF_CONST2[CINTS] contiguous NIX_CINT_HW_S structures. After
+ * writing to this register, software should read it back to ensure that
+ * the write has completed before accessing any NIX_LF_CINT()_*
+ * registers.
+ */
+union nixx_af_lfx_cints_base {
+ u64 u;
+ struct nixx_af_lfx_cints_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_cints_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CINTS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CINTS_BASE(u64 a)
+{
+ return 0x4130 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cints_cfg
+ *
+ * NIX AF Local Function Completion Interrupts Configuration Registers
+ * This register controls access to the LF's completion interrupt context
+ * table in NDC/LLC/DRAM. The table consists of NIX_AF_CONST2[CINTS]
+ * contiguous NIX_CINT_HW_S structures. The size of each structure is 1
+ * \<\< NIX_AF_CONST3[CINT_LOG2BYTES]. After writing to this register,
+ * software should read it back to ensure that the write has completed
+ * before accessing any NIX_LF_CINT()_* registers.
+ */
+union nixx_af_lfx_cints_cfg {
+ u64 u;
+ struct nixx_af_lfx_cints_cfg_s {
+ u64 reserved_0_19 : 20;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_cints_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CINTS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CINTS_CFG(u64 a)
+{
+ return 0x4120 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cqs_base
+ *
+ * NIX AF Local Function Completion Queues Base Address Register This
+ * register specifies the base AF IOVA of the LF's CQ context table. The
+ * table consists of NIX_AF_LF()_CQS_CFG[MAX_QUEUESM1]+1 contiguous
+ * NIX_CQ_CTX_S structures.
+ */
+union nixx_af_lfx_cqs_base {
+ u64 u;
+ struct nixx_af_lfx_cqs_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_cqs_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CQS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CQS_BASE(u64 a)
+{
+ return 0x4070 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cqs_cfg
+ *
+ * NIX AF Local Function Completion Queues Configuration Register This
+ * register configures completion queues in the LF.
+ */
+union nixx_af_lfx_cqs_cfg {
+ u64 u;
+ struct nixx_af_lfx_cqs_cfg_s {
+ u64 max_queuesm1 : 20;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_cqs_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CQS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CQS_CFG(u64 a)
+{
+ return 0x4060 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_lock#
+ *
+ * NIX AF Local Function Lockdown Registers Internal: The NIX lockdown
+ * depth of 32 bytes is shallow compared to 96 bytes for NIC and meant
+ * for outer MAC and/or VLAN (optionally preceded by a small number of
+ * skip bytes). NPC's MCAM can be used for deeper protocol-aware
+ * lockdown.
+ */
+union nixx_af_lfx_lockx {
+ u64 u;
+ struct nixx_af_lfx_lockx_s {
+ u64 data : 32;
+ u64 bit_ena : 32;
+ } s;
+ /* struct nixx_af_lfx_lockx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_LOCKX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_LOCKX(u64 a, u64 b)
+{
+ return 0x4300 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_qints_base
+ *
+ * NIX AF Local Function Queue Interrupts Base Address Registers This
+ * register specifies the base AF IOVA of LF's queue interrupt context
+ * table in NDC/LLC/DRAM. The table consists of NIX_AF_CONST2[QINTS]
+ * contiguous NIX_QINT_HW_S structures. After writing to this register,
+ * software should read it back to ensure that the write has completed
+ * before accessing any NIX_LF_QINT()_* registers.
+ */
+union nixx_af_lfx_qints_base {
+ u64 u;
+ struct nixx_af_lfx_qints_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_qints_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_QINTS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_QINTS_BASE(u64 a)
+{
+ return 0x4110 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_qints_cfg
+ *
+ * NIX AF Local Function Queue Interrupts Configuration Registers This
+ * register controls access to the LF's queue interrupt context table in
+ * NDC/LLC/DRAM. The table consists of NIX_AF_CONST2[QINTS] contiguous
+ * NIX_QINT_HW_S structures. The size of each structure is 1 \<\<
+ * NIX_AF_CONST3[QINT_LOG2BYTES]. After writing to this register,
+ * software should read it back to ensure that the write has completed
+ * before accessing any NIX_LF_QINT()_* registers.
+ */
+union nixx_af_lfx_qints_cfg {
+ u64 u;
+ struct nixx_af_lfx_qints_cfg_s {
+ u64 reserved_0_19 : 20;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_qints_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_QINTS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_QINTS_CFG(u64 a)
+{
+ return 0x4100 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rqs_base
+ *
+ * NIX AF Local Function Receive Queues Base Address Register This
+ * register specifies the base AF IOVA of the LF's RQ context table. The
+ * table consists of NIX_AF_LF()_RQS_CFG[MAX_QUEUESM1]+1 contiguous
+ * NIX_RQ_CTX_S structures.
+ */
+union nixx_af_lfx_rqs_base {
+ u64 u;
+ struct nixx_af_lfx_rqs_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_rqs_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RQS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RQS_BASE(u64 a)
+{
+ return 0x4050 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rqs_cfg
+ *
+ * NIX AF Local Function Receive Queues Configuration Register This
+ * register configures receive queues in the LF.
+ */
+union nixx_af_lfx_rqs_cfg {
+ u64 u;
+ struct nixx_af_lfx_rqs_cfg_s {
+ u64 max_queuesm1 : 20;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_rqs_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RQS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RQS_CFG(u64 a)
+{
+ return 0x4040 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rss_base
+ *
+ * NIX AF Local Function Receive Size Scaling Table Base Address Register
+ * This register specifies the base AF IOVA of the RSS table per LF. The
+ * table is present when NIX_AF_LF()_RSS_CFG[ENA] is set and consists of
+ * 1 \<\< (NIX_AF_LF()_RSS_CFG[SIZE] + 8) contiguous NIX_RSSE_S
+ * structures, where the size of each structure is 1 \<\<
+ * NIX_AF_CONST3[RSSE_LOG2BYTES]. See NIX_AF_LF()_RSS_GRP().
+ */
+union nixx_af_lfx_rss_base {
+ u64 u;
+ struct nixx_af_lfx_rss_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_rss_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RSS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RSS_BASE(u64 a)
+{
+ return 0x40d0 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rss_cfg
+ *
+ * NIX AF Local Function Receive Size Scaling Table Configuration
+ * Register See NIX_AF_LF()_RSS_BASE and NIX_AF_LF()_RSS_GRP().
+ */
+union nixx_af_lfx_rss_cfg {
+ u64 u;
+ struct nixx_af_lfx_rss_cfg_s {
+ u64 size : 4;
+ u64 ena : 1;
+ u64 adder_is_tag_lsb : 1;
+ u64 reserved_6_19 : 14;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ struct nixx_af_lfx_rss_cfg_cn96xxp1 {
+ u64 size : 4;
+ u64 ena : 1;
+ u64 reserved_5_19 : 15;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } cn96xxp1;
+ /* struct nixx_af_lfx_rss_cfg_s cn96xxp3; */
+ /* struct nixx_af_lfx_rss_cfg_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_LFX_RSS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RSS_CFG(u64 a)
+{
+ return 0x40c0 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rss_grp#
+ *
+ * NIX AF Local Function Receive Side Scaling Group Registers A receive
+ * packet targets a LF's RSS group when its NIX_RX_ACTION_S[OP] =
+ * NIX_RX_ACTIONOP_E::RSS, or its target multicast list has an entry with
+ * NIX_RX_MCE_S[OP] = NIX_RX_MCOP_E::RSS. The RSS group index (this
+ * register's last index) is NIX_RX_ACTION_S[INDEX] or
+ * NIX_RX_MCE_S[INDEX]. The RSS computation is as follows: * The
+ * packet's flow_tag (see NIX_LF_RX_SECRET()) and RSS group are used to
+ * select a NIX_RSSE_S entry in the LF's RSS table (see [SIZEM1]). *
+ * NIX_RSSE_S selects the packet's destination RQ.
+ */
+union nixx_af_lfx_rss_grpx {
+ u64 u;
+ struct nixx_af_lfx_rss_grpx_s {
+ u64 offset : 11;
+ u64 reserved_11_15 : 5;
+ u64 sizem1 : 3;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_lfx_rss_grpx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RSS_GRPX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RSS_GRPX(u64 a, u64 b)
+{
+ return 0x4600 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_cfg
+ *
+ * NIX AF Local Function Receive Configuration Register
+ */
+union nixx_af_lfx_rx_cfg {
+ u64 u;
+ struct nixx_af_lfx_rx_cfg_s {
+ u64 reserved_0_31 : 32;
+ u64 drop_re : 1;
+ u64 lenerr_en : 1;
+ u64 ip6_udp_opt : 1;
+ u64 dis_apad : 1;
+ u64 csum_il4 : 1;
+ u64 csum_ol4 : 1;
+ u64 len_il4 : 1;
+ u64 len_il3 : 1;
+ u64 len_ol4 : 1;
+ u64 len_ol3 : 1;
+ u64 reserved_42_63 : 22;
+ } s;
+ struct nixx_af_lfx_rx_cfg_cn96xxp1 {
+ u64 reserved_0_31 : 32;
+ u64 reserved_32 : 1;
+ u64 lenerr_en : 1;
+ u64 ip6_udp_opt : 1;
+ u64 dis_apad : 1;
+ u64 csum_il4 : 1;
+ u64 csum_ol4 : 1;
+ u64 len_il4 : 1;
+ u64 len_il3 : 1;
+ u64 len_ol4 : 1;
+ u64 len_ol3 : 1;
+ u64 reserved_42_63 : 22;
+ } cn96xxp1;
+ /* struct nixx_af_lfx_rx_cfg_s cn96xxp3; */
+ /* struct nixx_af_lfx_rx_cfg_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_CFG(u64 a)
+{
+ return 0x40a0 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_cfg0
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Configuration Registers Internal:
+ * Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_cfg0 {
+ u64 u;
+ struct nixx_af_lfx_rx_ipsec_cfg0_s {
+ u64 lenm1_max : 14;
+ u64 reserved_14_15 : 2;
+ u64 sa_pow2_size : 4;
+ u64 tag_const : 24;
+ u64 tt : 2;
+ u64 defcpt : 1;
+ u64 hshcpt : 1;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_lfx_rx_ipsec_cfg0_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG0(u64 a)
+{
+ return 0x4140 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_cfg1
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Security Association Configuration
+ * Register Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_cfg1 {
+ u64 u;
+ struct nixx_af_lfx_rx_ipsec_cfg1_s {
+ u64 sa_idx_max : 32;
+ u64 sa_idx_w : 5;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_rx_ipsec_cfg1_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG1(u64 a)
+{
+ return 0x4148 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_dyno_base
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Dynamic Ordering Base Address
+ * Registers Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_dyno_base {
+ u64 u;
+ struct nixx_af_lfx_rx_ipsec_dyno_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_rx_ipsec_dyno_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_BASE(u64 a)
+{
+ return 0x4158 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_dyno_cfg
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Dynamic Ordering Base Address
+ * Registers Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_dyno_cfg {
+ u64 u;
+ struct nixx_af_lfx_rx_ipsec_dyno_cfg_s {
+ u64 dyno_idx_w : 4;
+ u64 dyno_ena : 1;
+ u64 reserved_5_19 : 15;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_rx_ipsec_dyno_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_CFG(u64 a)
+{
+ return 0x4150 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_sa_base
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Security Association Base Address
+ * Register Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_sa_base {
+ u64 u;
+ struct nixx_af_lfx_rx_ipsec_sa_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_rx_ipsec_sa_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_SA_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_SA_BASE(u64 a)
+{
+ return 0x4170 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_stat#
+ *
+ * NIX AF Local Function Receive Statistics Registers The last dimension
+ * indicates which statistic, and is enumerated by NIX_STAT_LF_RX_E.
+ */
+union nixx_af_lfx_rx_statx {
+ u64 u;
+ struct nixx_af_lfx_rx_statx_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_lfx_rx_statx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_STATX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_STATX(u64 a, u64 b)
+{
+ return 0x4500 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_vtag_type#
+ *
+ * NIX AF Local Function Receive Vtag Type Registers These registers
+ * specify optional Vtag (e.g. VLAN, E-TAG) actions for received packets.
+ * Indexed by NIX_RX_VTAG_ACTION_S[VTAG*_TYPE].
+ */
+union nixx_af_lfx_rx_vtag_typex {
+ u64 u;
+ struct nixx_af_lfx_rx_vtag_typex_s {
+ u64 size : 1;
+ u64 reserved_1_3 : 3;
+ u64 strip : 1;
+ u64 capture : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct nixx_af_lfx_rx_vtag_typex_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_VTAG_TYPEX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_VTAG_TYPEX(u64 a, u64 b)
+{
+ return 0x4200 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_sqs_base
+ *
+ * NIX AF Local Function Send Queues Base Address Register This register
+ * specifies the base AF IOVA of the LF's SQ context table. The table
+ * consists of NIX_AF_LF()_SQS_CFG[MAX_QUEUESM1]+1 contiguous
+ * NIX_SQ_CTX_HW_S structures.
+ */
+union nixx_af_lfx_sqs_base {
+ u64 u;
+ struct nixx_af_lfx_sqs_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_lfx_sqs_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_SQS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_SQS_BASE(u64 a)
+{
+ return 0x4030 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_sqs_cfg
+ *
+ * NIX AF Local Function Send Queues Configuration Register This register
+ * configures send queues in the LF.
+ */
+union nixx_af_lfx_sqs_cfg {
+ u64 u;
+ struct nixx_af_lfx_sqs_cfg_s {
+ u64 max_queuesm1 : 20;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_lfx_sqs_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_SQS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_SQS_CFG(u64 a)
+{
+ return 0x4020 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_cfg
+ *
+ * NIX AF Local Function Transmit Configuration Register
+ */
+union nixx_af_lfx_tx_cfg {
+ u64 u;
+ struct nixx_af_lfx_tx_cfg_s {
+ u64 vlan0_ins_etype : 16;
+ u64 vlan1_ins_etype : 16;
+ u64 send_tstmp_ena : 1;
+ u64 lock_viol_cqe_ena : 1;
+ u64 lock_ena : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_lfx_tx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_CFG(u64 a)
+{
+ return 0x4080 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_cfg2
+ *
+ * NIX AF Local Function Transmit Configuration Register
+ */
+union nixx_af_lfx_tx_cfg2 {
+ u64 u;
+ struct nixx_af_lfx_tx_cfg2_s {
+ u64 lmt_ena : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_lfx_tx_cfg2_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_CFG2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_CFG2(u64 a)
+{
+ return 0x4028 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_parse_cfg
+ *
+ * NIX AF Local Function Transmit Parse Configuration Register
+ */
+union nixx_af_lfx_tx_parse_cfg {
+ u64 u;
+ struct nixx_af_lfx_tx_parse_cfg_s {
+ u64 pkind : 6;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct nixx_af_lfx_tx_parse_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_PARSE_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_PARSE_CFG(u64 a)
+{
+ return 0x4090 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_stat#
+ *
+ * NIX AF Local Function Transmit Statistics Registers The last dimension
+ * indicates which statistic, and is enumerated by NIX_STAT_LF_TX_E.
+ */
+union nixx_af_lfx_tx_statx {
+ u64 u;
+ struct nixx_af_lfx_tx_statx_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_lfx_tx_statx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_STATX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_STATX(u64 a, u64 b)
+{
+ return 0x4400 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_status
+ *
+ * NIX AF LF Transmit Status Register
+ */
+union nixx_af_lfx_tx_status {
+ u64 u;
+ struct nixx_af_lfx_tx_status_s {
+ u64 sq_ctx_err : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_lfx_tx_status_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_STATUS(u64 a)
+{
+ return 0x4180 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf_rst
+ *
+ * NIX Admin Function LF Reset Register
+ */
+union nixx_af_lf_rst {
+ u64 u;
+ struct nixx_af_lf_rst_s {
+ u64 lf : 8;
+ u64 reserved_8_11 : 4;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct nixx_af_lf_rst_s cn; */
+};
+
+static inline u64 NIXX_AF_LF_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LF_RST(void)
+{
+ return 0x150;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lso_cfg
+ *
+ * NIX AF Large Send Offload Configuration Register
+ */
+union nixx_af_lso_cfg {
+ u64 u;
+ struct nixx_af_lso_cfg_s {
+ u64 tcp_lsf : 16;
+ u64 tcp_msf : 16;
+ u64 tcp_fsf : 16;
+ u64 reserved_48_62 : 15;
+ u64 enable : 1;
+ } s;
+ /* struct nixx_af_lso_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LSO_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LSO_CFG(void)
+{
+ return 0xa8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lso_format#_field#
+ *
+ * NIX AF Large Send Offload Format Field Registers These registers
+ * specify LSO packet modification formats. Each format may modify up to
+ * eight packet fields with the following constraints: * If fewer than
+ * eight fields are modified, [ALG] must be NIX_LSOALG_E::NOP in the
+ * unused field registers. * Modified fields must be specified in
+ * contiguous field registers starting with NIX_AF_LSO_FORMAT()_FIELD(0).
+ * * Modified fields cannot overlap. * Multiple fields with the same
+ * [LAYER] value must be specified in ascending [OFFSET] order. * Fields
+ * in different layers must be specified in ascending [LAYER] order.
+ */
+union nixx_af_lso_formatx_fieldx {
+ u64 u;
+ struct nixx_af_lso_formatx_fieldx_s {
+ u64 offset : 8;
+ u64 layer : 2;
+ u64 reserved_10_11 : 2;
+ u64 sizem1 : 2;
+ u64 reserved_14_15 : 2;
+ u64 alg : 3;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_lso_formatx_fieldx_s cn; */
+};
+
+static inline u64 NIXX_AF_LSO_FORMATX_FIELDX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LSO_FORMATX_FIELDX(u64 a, u64 b)
+{
+ return 0x1b00 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mark_format#_ctl
+ *
+ * NIX AF Packet Marking Format Registers Describes packet marking
+ * calculations for YELLOW and for NIX_COLORRESULT_E::RED_SEND packets.
+ * NIX_SEND_EXT_S[MARKFORM] selects the CSR used for the packet
+ * descriptor. All the packet marking offset calculations assume big-
+ * endian bits within a byte. For example, if NIX_SEND_EXT_S[MARKPTR] is
+ * 3 and [OFFSET] is 5 and the packet is YELLOW, the NIX marking hardware
+ * would do this: _ byte[3]\<2:0\> |= [Y_VAL]\<3:1\> _
+ * byte[3]\<2:0\> &= ~[Y_MASK]\<3:1\> _ byte[4]\<7\> |= [Y_VAL]\<0\>
+ * _ byte[4]\<7\> &= ~[Y_MASK]\<0\> where byte[3] is the third byte
+ * in the packet, and byte[4] the fourth. For another example, if
+ * NIX_SEND_EXT_S[MARKPTR] is 3 and [OFFSET] is 0 and the packet is
+ * NIX_COLORRESULT_E::RED_SEND, _ byte[3]\<7:4\> |= [R_VAL]\<3:0\> _
+ * byte[3]\<7:4\> &= ~[R_MASK]\<3:0\>
+ */
+union nixx_af_mark_formatx_ctl {
+ u64 u;
+ struct nixx_af_mark_formatx_ctl_s {
+ u64 r_val : 4;
+ u64 r_mask : 4;
+ u64 y_val : 4;
+ u64 y_mask : 4;
+ u64 offset : 3;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_mark_formatx_ctl_s cn; */
+};
+
+static inline u64 NIXX_AF_MARK_FORMATX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MARK_FORMATX_CTL(u64 a)
+{
+ return 0x900 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mc_mirror_const
+ *
+ * NIX AF Multicast/Mirror Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_mc_mirror_const {
+ u64 u;
+ struct nixx_af_mc_mirror_const_s {
+ u64 buf_size : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_mc_mirror_const_s cn; */
+};
+
+static inline u64 NIXX_AF_MC_MIRROR_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MC_MIRROR_CONST(void)
+{
+ return 0x98;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_cir
+ *
+ * NIX AF Meta Descriptor Queue Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_mdqx_cir {
+ u64 u;
+ struct nixx_af_mdqx_cir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_mdqx_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_CIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_CIR(u64 a)
+{
+ return 0x1420 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_md_debug
+ *
+ * NIX AF Meta Descriptor Queue Meta Descriptor State Debug Registers
+ * This register provides access to the meta descriptor at the front of
+ * the MDQ. An MDQ can hold up to 8 packet meta descriptors (PMD) and one
+ * flush meta descriptor (FMD).
+ */
+union nixx_af_mdqx_md_debug {
+ u64 u;
+ struct nixx_af_mdqx_md_debug_s {
+ u64 pkt_len : 16;
+ u64 red_algo_override : 2;
+ u64 shp_dis : 1;
+ u64 reserved_19 : 1;
+ u64 shp_chg : 9;
+ u64 reserved_29_31 : 3;
+ u64 sqm_pkt_id : 13;
+ u64 reserved_45_60 : 16;
+ u64 md_type : 2;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct nixx_af_mdqx_md_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_MD_DEBUG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_MD_DEBUG(u64 a)
+{
+ return 0x14c0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_parent
+ *
+ * NIX AF Meta Descriptor Queue Topology Registers
+ */
+union nixx_af_mdqx_parent {
+ u64 u;
+ struct nixx_af_mdqx_parent_s {
+ u64 reserved_0_15 : 16;
+ u64 parent : 9;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_mdqx_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_PARENT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_PARENT(u64 a)
+{
+ return 0x1480 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_pir
+ *
+ * NIX AF Meta Descriptor Queue Peak Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_mdqx_pir {
+ u64 u;
+ struct nixx_af_mdqx_pir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_mdqx_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_PIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_PIR(u64 a)
+{
+ return 0x1430 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_pointers
+ *
+ * INTERNAL: NIX AF Meta Descriptor 4 Linked List Pointers Debug Register
+ * This register has the same bit fields as NIX_AF_TL4()_POINTERS.
+ */
+union nixx_af_mdqx_pointers {
+ u64 u;
+ struct nixx_af_mdqx_pointers_s {
+ u64 next : 9;
+ u64 reserved_9_15 : 7;
+ u64 prev : 9;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_mdqx_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_POINTERS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_POINTERS(u64 a)
+{
+ return 0x1460 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_ptr_fifo
+ *
+ * INTERNAL: NIX Meta Descriptor Queue Pointer FIFO State Debug Registers
+ */
+union nixx_af_mdqx_ptr_fifo {
+ u64 u;
+ struct nixx_af_mdqx_ptr_fifo_s {
+ u64 tail : 4;
+ u64 head : 4;
+ u64 p_con : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct nixx_af_mdqx_ptr_fifo_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_PTR_FIFO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_PTR_FIFO(u64 a)
+{
+ return 0x14d0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_sched_state
+ *
+ * NIX AF Meta Descriptor Queue Scheduling Control State Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHED_STATE.
+ */
+union nixx_af_mdqx_sched_state {
+ u64 u;
+ struct nixx_af_mdqx_sched_state_s {
+ u64 rr_count : 25;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_mdqx_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SCHED_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SCHED_STATE(u64 a)
+{
+ return 0x1440 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_schedule
+ *
+ * NIX AF Meta Descriptor Queue Scheduling Control Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHEDULE.
+ */
+union nixx_af_mdqx_schedule {
+ u64 u;
+ struct nixx_af_mdqx_schedule_s {
+ u64 rr_quantum : 24;
+ u64 prio : 4;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_mdqx_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SCHEDULE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SCHEDULE(u64 a)
+{
+ return 0x1400 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_shape
+ *
+ * NIX AF Meta Descriptor Queue Shaping Control Registers This register
+ * has the same bit fields as NIX_AF_TL3()_SHAPE.
+ */
+union nixx_af_mdqx_shape {
+ u64 u;
+ struct nixx_af_mdqx_shape_s {
+ u64 adjust : 9;
+ u64 red_algo : 2;
+ u64 red_disable : 1;
+ u64 yellow_disable : 1;
+ u64 reserved_13_23 : 11;
+ u64 length_disable : 1;
+ u64 schedule_list : 2;
+ u64 reserved_27_63 : 37;
+ } s;
+ /* struct nixx_af_mdqx_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SHAPE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SHAPE(u64 a)
+{
+ return 0x1410 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_shape_state
+ *
+ * NIX AF Meta Descriptor Queue Shaping State Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SHAPE_STATE. This register must
+ * not be written during normal operation.
+ */
+union nixx_af_mdqx_shape_state {
+ u64 u;
+ struct nixx_af_mdqx_shape_state_s {
+ u64 cir_accum : 26;
+ u64 pir_accum : 26;
+ u64 color : 2;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct nixx_af_mdqx_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SHAPE_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SHAPE_STATE(u64 a)
+{
+ return 0x1450 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_sw_xoff
+ *
+ * NIX AF Meta Descriptor Controlled XOFF Registers This register has the
+ * same bit fields as NIX_AF_TL1()_SW_XOFF
+ */
+union nixx_af_mdqx_sw_xoff {
+ u64 u;
+ struct nixx_af_mdqx_sw_xoff_s {
+ u64 xoff : 1;
+ u64 drain : 1;
+ u64 reserved_2 : 1;
+ u64 drain_irq : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct nixx_af_mdqx_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SW_XOFF(u64 a)
+{
+ return 0x1470 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq_const
+ *
+ * NIX AF Meta Descriptor Queue Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_mdq_const {
+ u64 u;
+ struct nixx_af_mdq_const_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_mdq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQ_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQ_CONST(void)
+{
+ return 0x90;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ndc_cfg
+ *
+ * NIX AF General Configuration Register
+ */
+union nixx_af_ndc_cfg {
+ u64 u;
+ struct nixx_af_ndc_cfg_s {
+ u64 ndc_ign_pois : 1;
+ u64 byp_sq : 1;
+ u64 byp_sqb : 1;
+ u64 byp_cqs : 1;
+ u64 byp_cints : 1;
+ u64 byp_dyno : 1;
+ u64 byp_mce : 1;
+ u64 byp_rqc : 1;
+ u64 byp_rsse : 1;
+ u64 byp_mc_data : 1;
+ u64 byp_mc_wqe : 1;
+ u64 byp_mr_data : 1;
+ u64 byp_mr_wqe : 1;
+ u64 byp_qints : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct nixx_af_ndc_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_NDC_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NDC_CFG(void)
+{
+ return 0x18;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ndc_rx_sync
+ *
+ * NIX AF Receive NDC Sync Register Used to synchronize the NIX receive
+ * NDC (NDC_IDX_E::NIX()_RX).
+ */
+union nixx_af_ndc_rx_sync {
+ u64 u;
+ struct nixx_af_ndc_rx_sync_s {
+ u64 lf : 8;
+ u64 reserved_8_11 : 4;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct nixx_af_ndc_rx_sync_s cn; */
+};
+
+static inline u64 NIXX_AF_NDC_RX_SYNC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NDC_RX_SYNC(void)
+{
+ return 0x3e0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ndc_tx_sync
+ *
+ * NIX AF NDC_TX Sync Register Used to synchronize the NIX transmit NDC
+ * (NDC_IDX_E::NIX()_TX).
+ */
+union nixx_af_ndc_tx_sync {
+ u64 u;
+ struct nixx_af_ndc_tx_sync_s {
+ u64 lf : 8;
+ u64 reserved_8_11 : 4;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct nixx_af_ndc_tx_sync_s cn; */
+};
+
+static inline u64 NIXX_AF_NDC_TX_SYNC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NDC_TX_SYNC(void)
+{
+ return 0x3f0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_norm_tx_fifo_status
+ *
+ * NIX AF Normal Transmit FIFO Status Register Status of FIFO which
+ * transmits normal packets to CGX and LBK.
+ */
+union nixx_af_norm_tx_fifo_status {
+ u64 u;
+ struct nixx_af_norm_tx_fifo_status_s {
+ u64 count : 12;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct nixx_af_norm_tx_fifo_status_s cn; */
+};
+
+static inline u64 NIXX_AF_NORM_TX_FIFO_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NORM_TX_FIFO_STATUS(void)
+{
+ return 0x648;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq#_dbg_arb_link_exp
+ *
+ * INTERNAL: NIX AF PQ Arb Link EXPRESS Debug Register
+ */
+union nixx_af_pqx_dbg_arb_link_exp {
+ u64 u;
+ struct nixx_af_pqx_dbg_arb_link_exp_s {
+ u64 req : 1;
+ u64 act_c_con : 1;
+ u64 cnt : 2;
+ u64 reserved_4_5 : 2;
+ u64 rr_mask : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct nixx_af_pqx_dbg_arb_link_exp_s cn; */
+};
+
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_EXP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_EXP(u64 a)
+{
+ return 0xce8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq#_dbg_arb_link_nrm
+ *
+ * INTERNAL: NIX AF PQ Arb Link NORMAL Debug Register
+ */
+union nixx_af_pqx_dbg_arb_link_nrm {
+ u64 u;
+ struct nixx_af_pqx_dbg_arb_link_nrm_s {
+ u64 req : 1;
+ u64 act_c_con : 1;
+ u64 cnt : 2;
+ u64 reserved_4_5 : 2;
+ u64 rr_mask : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct nixx_af_pqx_dbg_arb_link_nrm_s cn; */
+};
+
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_NRM(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_NRM(u64 a)
+{
+ return 0xce0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq#_dbg_arb_link_sdp
+ *
+ * INTERNAL: NIX AF PQ Arb Link SDP Debug Register
+ */
+union nixx_af_pqx_dbg_arb_link_sdp {
+ u64 u;
+ struct nixx_af_pqx_dbg_arb_link_sdp_s {
+ u64 req : 1;
+ u64 act_c_con : 1;
+ u64 cnt : 2;
+ u64 reserved_4_5 : 2;
+ u64 rr_mask : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct nixx_af_pqx_dbg_arb_link_sdp_s cn; */
+};
+
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_SDP(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_SDP(u64 a)
+{
+ return 0xcf0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_crd_rdy_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB Node Credit Ready Registers NIX AF PQ ARB
+ * Credit ready register
+ */
+union nixx_af_pq_arb_crd_rdy_debug {
+ u64 u;
+ struct nixx_af_pq_arb_crd_rdy_debug_s {
+ u64 node_crd_rdy : 28;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_pq_arb_crd_rdy_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_CRD_RDY_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_CRD_RDY_DEBUG(void)
+{
+ return 0xf10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_dwrr_msk_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB DWRR mask set read only debug Registers
+ */
+union nixx_af_pq_arb_dwrr_msk_debug {
+ u64 u;
+ struct nixx_af_pq_arb_dwrr_msk_debug_s {
+ u64 node_dwrr_mask_set : 28;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_pq_arb_dwrr_msk_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_DWRR_MSK_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_DWRR_MSK_DEBUG(void)
+{
+ return 0xf30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_node_gnt_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB Node Grant vector Registers
+ */
+union nixx_af_pq_arb_node_gnt_debug {
+ u64 u;
+ struct nixx_af_pq_arb_node_gnt_debug_s {
+ u64 node_grant_vec : 28;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_pq_arb_node_gnt_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_NODE_GNT_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_NODE_GNT_DEBUG(void)
+{
+ return 0xf20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_node_req_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB Node Request Debug Registers NIX AF PQ ARB
+ * Node Request Debug register
+ */
+union nixx_af_pq_arb_node_req_debug {
+ u64 u;
+ struct nixx_af_pq_arb_node_req_debug_s {
+ u64 node_req : 28;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_pq_arb_node_req_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_NODE_REQ_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_NODE_REQ_DEBUG(void)
+{
+ return 0xf00;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_shape_vld_dbg
+ *
+ * INTERNAL: NIX AF PQ_ARB shape valid set Register
+ */
+union nixx_af_pq_arb_shape_vld_dbg {
+ u64 u;
+ struct nixx_af_pq_arb_shape_vld_dbg_s {
+ u64 node_shape_vld_set : 28;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_pq_arb_shape_vld_dbg_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_SHAPE_VLD_DBG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_SHAPE_VLD_DBG(void)
+{
+ return 0xf40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_dbg_arb_0
+ *
+ * INTERNAL: NIX AF PQ Arb Debug 0 Register
+ */
+union nixx_af_pq_dbg_arb_0 {
+ u64 u;
+ struct nixx_af_pq_dbg_arb_0_s {
+ u64 rr_mask_clr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_pq_dbg_arb_0_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_DBG_ARB_0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_DBG_ARB_0(void)
+{
+ return 0xcf8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_lnk_#_dwrr_msk_dbg
+ *
+ * INTERNAL: NIX AF PQ_ARB Physical Link DWRR MASK Registers
+ */
+union nixx_af_pq_lnk_x_dwrr_msk_dbg {
+ u64 u;
+ struct nixx_af_pq_lnk_x_dwrr_msk_dbg_s {
+ u64 link_dwrr_mask_set : 28;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_pq_lnk_x_dwrr_msk_dbg_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_LNK_X_DWRR_MSK_DBG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_LNK_X_DWRR_MSK_DBG(u64 a)
+{
+ return 0x1100 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_400_rate_divider
+ *
+ * INTERNAL: NIX AF PSE 400 Rate Divider Register
+ */
+union nixx_af_pse_400_rate_divider {
+ u64 u;
+ struct nixx_af_pse_400_rate_divider_s {
+ u64 rate_div_cfg : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct nixx_af_pse_400_rate_divider_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_400_RATE_DIVIDER(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_400_RATE_DIVIDER(void)
+{
+ return 0x830;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_active_cycles_pc
+ *
+ * NIX AF Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_pse_active_cycles_pc {
+ u64 u;
+ struct nixx_af_pse_active_cycles_pc_s {
+ u64 act_cyc : 64;
+ } s;
+ /* struct nixx_af_pse_active_cycles_pc_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_ACTIVE_CYCLES_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_ACTIVE_CYCLES_PC(void)
+{
+ return 0x8c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test0
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 0 Register
+ */
+union nixx_af_pse_bp_test0 {
+ u64 u;
+ struct nixx_af_pse_bp_test0_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_63 : 52;
+ } s;
+ struct nixx_af_pse_bp_test0_cn96xxp1 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_59 : 36;
+ u64 enable : 4;
+ } cn96xxp1;
+ struct nixx_af_pse_bp_test0_cn96xxp3 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 reserved_16_19 : 4;
+ u64 bp_cfg : 12;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_57 : 2;
+ u64 enable : 6;
+ } cn96xxp3;
+ /* struct nixx_af_pse_bp_test0_cn96xxp1 cnf95xxp1; */
+ struct nixx_af_pse_bp_test0_cnf95xxp2 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_59 : 4;
+ u64 enable : 4;
+ } cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST0(void)
+{
+ return 0x840;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test1
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 1 Register
+ */
+union nixx_af_pse_bp_test1 {
+ u64 u;
+ struct nixx_af_pse_bp_test1_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 10;
+ u64 reserved_26_63 : 38;
+ } s;
+ struct nixx_af_pse_bp_test1_cn96xxp1 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_59 : 36;
+ u64 enable : 4;
+ } cn96xxp1;
+ struct nixx_af_pse_bp_test1_cn96xxp3 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 10;
+ u64 reserved_26_31 : 6;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_58 : 3;
+ u64 enable : 5;
+ } cn96xxp3;
+ /* struct nixx_af_pse_bp_test1_cn96xxp1 cnf95xxp1; */
+ struct nixx_af_pse_bp_test1_cnf95xxp2 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_59 : 4;
+ u64 enable : 4;
+ } cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST1(void)
+{
+ return 0x850;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test2
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 2 Register
+ */
+union nixx_af_pse_bp_test2 {
+ u64 u;
+ struct nixx_af_pse_bp_test2_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 10;
+ u64 reserved_26_63 : 38;
+ } s;
+ struct nixx_af_pse_bp_test2_cn96xxp1 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_59 : 36;
+ u64 enable : 4;
+ } cn96xxp1;
+ struct nixx_af_pse_bp_test2_cn96xxp3 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 10;
+ u64 reserved_26_31 : 6;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_58 : 3;
+ u64 enable : 5;
+ } cn96xxp3;
+ /* struct nixx_af_pse_bp_test2_cn96xxp1 cnf95xxp1; */
+ struct nixx_af_pse_bp_test2_cnf95xxp2 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_59 : 4;
+ u64 enable : 4;
+ } cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST2(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST2(void)
+{
+ return 0x860;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test3
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 3 Register
+ */
+union nixx_af_pse_bp_test3 {
+ u64 u;
+ struct nixx_af_pse_bp_test3_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 10;
+ u64 reserved_26_63 : 38;
+ } s;
+ struct nixx_af_pse_bp_test3_cn96xxp1 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_59 : 36;
+ u64 enable : 4;
+ } cn96xxp1;
+ struct nixx_af_pse_bp_test3_cn96xxp3 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 10;
+ u64 reserved_26_31 : 6;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_58 : 3;
+ u64 enable : 5;
+ } cn96xxp3;
+ /* struct nixx_af_pse_bp_test3_cn96xxp1 cnf95xxp1; */
+ struct nixx_af_pse_bp_test3_cnf95xxp2 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_55 : 24;
+ u64 reserved_56_59 : 4;
+ u64 enable : 4;
+ } cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST3(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST3(void)
+{
+ return 0x870;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_channel_level
+ *
+ * NIX AF PSE Channel Level Register
+ */
+union nixx_af_pse_channel_level {
+ u64 u;
+ struct nixx_af_pse_channel_level_s {
+ u64 bp_level : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_pse_channel_level_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_CHANNEL_LEVEL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_CHANNEL_LEVEL(void)
+{
+ return 0x800;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_const
+ *
+ * NIX AF PSE Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_pse_const {
+ u64 u;
+ struct nixx_af_pse_const_s {
+ u64 levels : 4;
+ u64 reserved_4_7 : 4;
+ u64 mark_formats : 8;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_pse_const_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_CONST(void)
+{
+ return 0x60;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_eco
+ *
+ * INTERNAL: AF PSE ECO Register
+ */
+union nixx_af_pse_eco {
+ u64 u;
+ struct nixx_af_pse_eco_s {
+ u64 eco_rw : 64;
+ } s;
+ /* struct nixx_af_pse_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_ECO(void)
+{
+ return 0x5d0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_expr_bp_test
+ *
+ * INTERNAL: NIX AF PSE Express Backpressure Test Register Internal:
+ * 802.3br frame preemption/express path is defeatured.
+ */
+union nixx_af_pse_expr_bp_test {
+ u64 u;
+ struct nixx_af_pse_expr_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 32;
+ u64 enable : 16;
+ } s;
+ /* struct nixx_af_pse_expr_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_EXPR_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_EXPR_BP_TEST(void)
+{
+ return 0x890;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_norm_bp_test
+ *
+ * INTERNAL: NIX AF PSE Normal Backpressure Test Register
+ */
+union nixx_af_pse_norm_bp_test {
+ u64 u;
+ struct nixx_af_pse_norm_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 32;
+ u64 reserved_48_63 : 16;
+ } s;
+ struct nixx_af_pse_norm_bp_test_cn96xxp1 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 32;
+ u64 enable : 16;
+ } cn96xxp1;
+ struct nixx_af_pse_norm_bp_test_cn96xxp3 {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 12;
+ u64 reserved_28_57 : 30;
+ u64 enable : 6;
+ } cn96xxp3;
+ /* struct nixx_af_pse_norm_bp_test_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_PSE_NORM_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_NORM_BP_TEST(void)
+{
+ return 0x880;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_shaper_cfg
+ *
+ * NIX AF PSE Shaper Configuration Register
+ */
+union nixx_af_pse_shaper_cfg {
+ u64 u;
+ struct nixx_af_pse_shaper_cfg_s {
+ u64 red_send_as_yellow : 1;
+ u64 color_aware : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct nixx_af_pse_shaper_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_SHAPER_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_SHAPER_CFG(void)
+{
+ return 0x810;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras
+ *
+ * NIX AF RAS Interrupt Register This register is intended for delivery
+ * of RAS events to the SCP, so should be ignored by OS drivers.
+ */
+union nixx_af_ras {
+ u64 u;
+ struct nixx_af_ras_s {
+ u64 rx_mce_poison : 1;
+ u64 rx_mcast_wqe_poison : 1;
+ u64 rx_mirror_wqe_poison : 1;
+ u64 rx_mcast_data_poison : 1;
+ u64 rx_mirror_data_poison : 1;
+ u64 reserved_5_31 : 27;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_ras_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS(void)
+{
+ return 0x1a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras_ena_w1c
+ *
+ * NIX AF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_af_ras_ena_w1c {
+ u64 u;
+ struct nixx_af_ras_ena_w1c_s {
+ u64 rx_mce_poison : 1;
+ u64 rx_mcast_wqe_poison : 1;
+ u64 rx_mirror_wqe_poison : 1;
+ u64 rx_mcast_data_poison : 1;
+ u64 rx_mirror_data_poison : 1;
+ u64 reserved_5_31 : 27;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS_ENA_W1C(void)
+{
+ return 0x1b8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras_ena_w1s
+ *
+ * NIX AF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union nixx_af_ras_ena_w1s {
+ u64 u;
+ struct nixx_af_ras_ena_w1s_s {
+ u64 rx_mce_poison : 1;
+ u64 rx_mcast_wqe_poison : 1;
+ u64 rx_mirror_wqe_poison : 1;
+ u64 rx_mcast_data_poison : 1;
+ u64 rx_mirror_data_poison : 1;
+ u64 reserved_5_31 : 27;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS_ENA_W1S(void)
+{
+ return 0x1b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras_w1s
+ *
+ * NIX AF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_af_ras_w1s {
+ u64 u;
+ struct nixx_af_ras_w1s_s {
+ u64 rx_mce_poison : 1;
+ u64 rx_mcast_wqe_poison : 1;
+ u64 rx_mirror_wqe_poison : 1;
+ u64 rx_mcast_data_poison : 1;
+ u64 rx_mirror_data_poison : 1;
+ u64 reserved_5_31 : 27;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_ras_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS_W1S(void)
+{
+ return 0x1a8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_reb_bp_test#
+ *
+ * INTERNAL: NIX AF REB Backpressure Test Registers
+ */
+union nixx_af_reb_bp_testx {
+ u64 u;
+ struct nixx_af_reb_bp_testx_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_47 : 24;
+ u64 enable : 4;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct nixx_af_reb_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_REB_BP_TESTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_REB_BP_TESTX(u64 a)
+{
+ return 0x4840 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rq_const
+ *
+ * NIX AF RQ Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_rq_const {
+ u64 u;
+ struct nixx_af_rq_const_s {
+ u64 queues_per_lf : 24;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_rq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_RQ_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RQ_CONST(void)
+{
+ return 0x50;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rqm_bp_test
+ *
+ * INTERNAL: NIX AF REB Backpressure Test Registers
+ */
+union nixx_af_rqm_bp_test {
+ u64 u;
+ struct nixx_af_rqm_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 16;
+ u64 reserved_32_47 : 16;
+ u64 enable : 8;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct nixx_af_rqm_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_RQM_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RQM_BP_TEST(void)
+{
+ return 0x4880;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rqm_eco
+ *
+ * INTERNAL: AF RQM ECO Register
+ */
+union nixx_af_rqm_eco {
+ u64 u;
+ struct nixx_af_rqm_eco_s {
+ u64 eco_rw : 64;
+ } s;
+ /* struct nixx_af_rqm_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_RQM_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RQM_ECO(void)
+{
+ return 0x5a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int
+ *
+ * NIX AF RVU Interrupt Register This register contains RVU error
+ * interrupt summary bits.
+ */
+union nixx_af_rvu_int {
+ u64 u;
+ struct nixx_af_rvu_int_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_rvu_int_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT(void)
+{
+ return 0x1c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int_ena_w1c
+ *
+ * NIX AF RVU Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_af_rvu_int_ena_w1c {
+ u64 u;
+ struct nixx_af_rvu_int_ena_w1c_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_rvu_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT_ENA_W1C(void)
+{
+ return 0x1d8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int_ena_w1s
+ *
+ * NIX AF RVU Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union nixx_af_rvu_int_ena_w1s {
+ u64 u;
+ struct nixx_af_rvu_int_ena_w1s_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_rvu_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT_ENA_W1S(void)
+{
+ return 0x1d0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int_w1s
+ *
+ * NIX AF RVU Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_af_rvu_int_w1s {
+ u64 u;
+ struct nixx_af_rvu_int_w1s_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_rvu_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT_W1S(void)
+{
+ return 0x1c8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_lf_cfg_debug
+ *
+ * NIX Privileged LF Configuration Debug Register This debug register
+ * allows software to lookup the reverse mapping from VF/PF slot to LF.
+ * The forward mapping is programmed with NIX_PRIV_LF()_CFG.
+ */
+union nixx_af_rvu_lf_cfg_debug {
+ u64 u;
+ struct nixx_af_rvu_lf_cfg_debug_s {
+ u64 lf : 12;
+ u64 lf_valid : 1;
+ u64 exec : 1;
+ u64 reserved_14_15 : 2;
+ u64 slot : 8;
+ u64 pf_func : 16;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_rvu_lf_cfg_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_LF_CFG_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_LF_CFG_DEBUG(void)
+{
+ return 0x8000030;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_active_cycles_pc#
+ *
+ * NIX AF Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_rx_active_cycles_pcx {
+ u64 u;
+ struct nixx_af_rx_active_cycles_pcx_s {
+ u64 act_cyc : 64;
+ } s;
+ /* struct nixx_af_rx_active_cycles_pcx_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_ACTIVE_CYCLES_PCX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_ACTIVE_CYCLES_PCX(u64 a)
+{
+ return 0x4800 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_bpid#_status
+ *
+ * NIX AF Receive Backpressure ID Status Registers
+ */
+union nixx_af_rx_bpidx_status {
+ u64 u;
+ struct nixx_af_rx_bpidx_status_s {
+ u64 aura_cnt : 32;
+ u64 cq_cnt : 32;
+ } s;
+ /* struct nixx_af_rx_bpidx_status_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_BPIDX_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_BPIDX_STATUS(u64 a)
+{
+ return 0x1a20 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_cfg
+ *
+ * NIX AF Receive Configuration Register
+ */
+union nixx_af_rx_cfg {
+ u64 u;
+ struct nixx_af_rx_cfg_s {
+ u64 cbp_ena : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_rx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CFG(void)
+{
+ return 0xd0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_chan#_cfg
+ *
+ * NIX AF Receive Channel Configuration Registers
+ */
+union nixx_af_rx_chanx_cfg {
+ u64 u;
+ struct nixx_af_rx_chanx_cfg_s {
+ u64 bpid : 9;
+ u64 reserved_9_15 : 7;
+ u64 bp_ena : 1;
+ u64 sw_xoff : 1;
+ u64 imp : 1;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_rx_chanx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CHANX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CHANX_CFG(u64 a)
+{
+ return 0x1a30 + 0x8000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_cpt#_credit
+ *
+ * INTERNAL: NIX AF Receive CPT Credit Register Internal: Not used; no
+ * IPSEC fast-path.
+ */
+union nixx_af_rx_cptx_credit {
+ u64 u;
+ struct nixx_af_rx_cptx_credit_s {
+ u64 inst_cred_cnt : 22;
+ u64 reserved_22_63 : 42;
+ } s;
+ /* struct nixx_af_rx_cptx_credit_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CPTX_CREDIT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CPTX_CREDIT(u64 a)
+{
+ return 0x360 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_cpt#_inst_qsel
+ *
+ * INTERNAL: NIX AF Receive CPT Instruction Queue Select Register
+ * Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_rx_cptx_inst_qsel {
+ u64 u;
+ struct nixx_af_rx_cptx_inst_qsel_s {
+ u64 slot : 8;
+ u64 pf_func : 16;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_rx_cptx_inst_qsel_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CPTX_INST_QSEL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CPTX_INST_QSEL(u64 a)
+{
+ return 0x320 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_iip4
+ *
+ * NIX AF Receive Inner IPv4 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner IPv4 header.
+ * Typically the same as NPC_AF_PCK_DEF_IIP4.
+ */
+union nixx_af_rx_def_iip4 {
+ u64 u;
+ struct nixx_af_rx_def_iip4_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_iip4_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IIP4(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IIP4(void)
+{
+ return 0x220;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_iip6
+ *
+ * NIX AF Receive Inner IPv6 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner IPv6 header.
+ */
+union nixx_af_rx_def_iip6 {
+ u64 u;
+ struct nixx_af_rx_def_iip6_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_iip6_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IIP6(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IIP6(void)
+{
+ return 0x240;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_ipsec#
+ *
+ * INTERNAL: NIX AF Receive IPSEC Header Definition Registers Internal:
+ * Not used; no IPSEC fast-path.
+ */
+union nixx_af_rx_def_ipsecx {
+ u64 u;
+ struct nixx_af_rx_def_ipsecx_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11 : 1;
+ u64 spi_offset : 4;
+ u64 spi_nz : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct nixx_af_rx_def_ipsecx_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IPSECX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IPSECX(u64 a)
+{
+ return 0x2b0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_isctp
+ *
+ * NIX AF Receive Inner SCTP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner SCTP header.
+ */
+union nixx_af_rx_def_isctp {
+ u64 u;
+ struct nixx_af_rx_def_isctp_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_isctp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_ISCTP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_ISCTP(void)
+{
+ return 0x2a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_itcp
+ *
+ * NIX AF Receive Inner TCP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner TCP header.
+ */
+union nixx_af_rx_def_itcp {
+ u64 u;
+ struct nixx_af_rx_def_itcp_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_itcp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_ITCP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_ITCP(void)
+{
+ return 0x260;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_iudp
+ *
+ * NIX AF Receive Inner UDP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner UDP header.
+ */
+union nixx_af_rx_def_iudp {
+ u64 u;
+ struct nixx_af_rx_def_iudp_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_iudp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IUDP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IUDP(void)
+{
+ return 0x280;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_oip4
+ *
+ * NIX AF Receive Outer IPv4 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer IPv4 L3 header.
+ * Typically the same as NPC_AF_PCK_DEF_OIP4.
+ */
+union nixx_af_rx_def_oip4 {
+ u64 u;
+ struct nixx_af_rx_def_oip4_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_oip4_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OIP4(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OIP4(void)
+{
+ return 0x210;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_oip6
+ *
+ * NIX AF Receive Outer IPv6 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer IPv6 header.
+ * Typically the same as NPC_AF_PCK_DEF_OIP6.
+ */
+union nixx_af_rx_def_oip6 {
+ u64 u;
+ struct nixx_af_rx_def_oip6_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_oip6_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OIP6(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OIP6(void)
+{
+ return 0x230;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_ol2
+ *
+ * NIX AF Receive Outer L2 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer L2/Ethernet header.
+ * Typically the same as NPC_AF_PCK_DEF_OL2.
+ */
+union nixx_af_rx_def_ol2 {
+ u64 u;
+ struct nixx_af_rx_def_ol2_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_ol2_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OL2(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OL2(void)
+{
+ return 0x200;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_osctp
+ *
+ * NIX AF Receive Outer SCTP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer SCTP header.
+ */
+union nixx_af_rx_def_osctp {
+ u64 u;
+ struct nixx_af_rx_def_osctp_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_osctp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OSCTP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OSCTP(void)
+{
+ return 0x290;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_otcp
+ *
+ * NIX AF Receive Outer TCP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer TCP header.
+ */
+union nixx_af_rx_def_otcp {
+ u64 u;
+ struct nixx_af_rx_def_otcp_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_otcp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OTCP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OTCP(void)
+{
+ return 0x250;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_oudp
+ *
+ * NIX AF Receive Outer UDP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer UDP header.
+ */
+union nixx_af_rx_def_oudp {
+ u64 u;
+ struct nixx_af_rx_def_oudp_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_af_rx_def_oudp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OUDP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OUDP(void)
+{
+ return 0x270;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_flow_key_alg#_field#
+ *
+ * NIX AF Receive Flow Key Algorithm Field Registers A flow key algorithm
+ * defines how the 40-byte FLOW_KEY is formed from the received packet
+ * header. FLOW_KEY is formed using up to five header fields (this
+ * register's last index) with up to 16 bytes per field. Header fields
+ * must not overlap in FLOW_KEY. The algorithm (index {a} (ALG) of these
+ * registers) is selected by NIX_RX_ACTION_S[FLOW_KEY_ALG] from the
+ * packet's NPC_RESULT_S[ACTION]. Internal: 40-byte FLOW_KEY is wide
+ * enough to support an IPv6 5-tuple that includes a VXLAN/GENEVE/NVGRE
+ * tunnel ID, e.g: _ Source IP: 16B. _ Dest IP: 16B. _ Source port: 2B. _
+ * Dest port: 2B. _ Tunnel VNI/VSI: 3B. _ Total: 39B.
+ */
+union nixx_af_rx_flow_key_algx_fieldx {
+ u64 u;
+ struct nixx_af_rx_flow_key_algx_fieldx_s {
+ u64 key_offset : 6;
+ u64 ln_mask : 1;
+ u64 fn_mask : 1;
+ u64 hdr_offset : 8;
+ u64 bytesm1 : 5;
+ u64 lid : 3;
+ u64 reserved_24 : 1;
+ u64 ena : 1;
+ u64 sel_chan : 1;
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct nixx_af_rx_flow_key_algx_fieldx_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_FLOW_KEY_ALGX_FIELDX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_FLOW_KEY_ALGX_FIELDX(u64 a, u64 b)
+{
+ return 0x1800 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_ipsec_gen_cfg
+ *
+ * INTERNAL: NIX AF Receive IPSEC General Configuration Register
+ * Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_rx_ipsec_gen_cfg {
+ u64 u;
+ struct nixx_af_rx_ipsec_gen_cfg_s {
+ u64 param2 : 16;
+ u64 param1 : 16;
+ u64 opcode : 16;
+ u64 egrp : 3;
+ u64 reserved_51_63 : 13;
+ } s;
+ /* struct nixx_af_rx_ipsec_gen_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_IPSEC_GEN_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_IPSEC_GEN_CFG(void)
+{
+ return 0x300;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_link#_cfg
+ *
+ * NIX AF Receive Link Configuration Registers Index enumerated by
+ * NIX_LINK_E.
+ */
+union nixx_af_rx_linkx_cfg {
+ u64 u;
+ struct nixx_af_rx_linkx_cfg_s {
+ u64 minlen : 16;
+ u64 maxlen : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct nixx_af_rx_linkx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_LINKX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_LINKX_CFG(u64 a)
+{
+ return 0x540 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_link#_sl#_spkt_cnt
+ *
+ * INTERNAL: NIX Receive Software Sync Link Packet Count Registers For
+ * diagnostic use only for debug of NIX_AF_RX_SW_SYNC[ENA] function. LINK
+ * index is enumerated by NIX_LINK_E. For the internal multicast/mirror
+ * link (NIX_LINK_E::MC), SL index is zero for multicast replay, one for
+ * mirror replay. SL index one is reserved for all other links.
+ * Internal: 802.3br frame preemption/express path is defeatured. Old
+ * definition of SL index: SL index is zero for non-express packets, one
+ * for express packets. For the internal NIX_LINK_E::MC, SL index is zero
+ * for multicast replay, one for mirror replay.
+ */
+union nixx_af_rx_linkx_slx_spkt_cnt {
+ u64 u;
+ struct nixx_af_rx_linkx_slx_spkt_cnt_s {
+ u64 in_cnt : 20;
+ u64 reserved_20_31 : 12;
+ u64 out_cnt : 20;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct nixx_af_rx_linkx_slx_spkt_cnt_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_LINKX_SLX_SPKT_CNT(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_LINKX_SLX_SPKT_CNT(u64 a, u64 b)
+{
+ return 0x500 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_link#_wrr_cfg
+ *
+ * NIX AF Receive Link Weighted Round Robin Configuration Registers Index
+ * enumerated by NIX_LINK_E.
+ */
+union nixx_af_rx_linkx_wrr_cfg {
+ u64 u;
+ struct nixx_af_rx_linkx_wrr_cfg_s {
+ u64 weight : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct nixx_af_rx_linkx_wrr_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_LINKX_WRR_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_LINKX_WRR_CFG(u64 a)
+{
+ return 0x560 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_base
+ *
+ * NIX AF Receive Multicast/Mirror Table Base Address Register This
+ * register specifies the base AF IOVA of the receive multicast/mirror
+ * table in NDC/LLC/DRAM. The table consists of 1 \<\<
+ * (NIX_AF_RX_MCAST_CFG[SIZE] + 8) contiguous NIX_RX_MCE_S structures.
+ * The size of each structure is 1 \<\< NIX_AF_CONST3[MCE_LOG2BYTES].
+ * The table contains multicast/mirror replication lists. Each list
+ * consists of linked entries with NIX_RX_MCE_S[EOL] = 1 in the last
+ * entry. All lists must reside within the table size specified by
+ * NIX_AF_RX_MCAST_CFG[SIZE]. A mirror replication list will typically
+ * consist of two entries, but that is not checked or enforced by
+ * hardware. A receive packet is multicast when the action returned by
+ * NPC has NIX_RX_ACTION_S[OP] = NIX_RX_ACTIONOP_E::MCAST. A receive
+ * packet is mirrored when the action returned by NPC has
+ * NIX_RX_ACTION_S[OP] = NIX_RX_ACTIONOP_E::MIRROR. In both cases,
+ * NIX_RX_ACTION_S[INDEX] specifies the index of the replication list's
+ * first NIX_RX_MCE_S in the table, and a linked entry with
+ * NIX_RX_MCE_S[EOL] = 1 indicates the end of list. If a mirrored flow
+ * is part of a multicast replication list, software should include the
+ * two mirror entries in that list. Internal: A multicast list may have
+ * multiple entries for the same LF (e.g. for future RoCE/IB multicast).
+ */
+union nixx_af_rx_mcast_base {
+ u64 u;
+ struct nixx_af_rx_mcast_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_rx_mcast_base_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_BASE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_BASE(void)
+{
+ return 0x100;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_buf_base
+ *
+ * NIX AF Receive Multicast Buffer Base Address Register This register
+ * specifies the base AF IOVA of the receive multicast buffers in
+ * NDC/LLC/DRAM. These buffers are used to temporarily store packets
+ * whose action returned by NPC has NIX_RX_ACTION_S[OP] =
+ * NIX_RX_ACTIONOP_E::MCAST. The number of buffers is configured by
+ * NIX_AF_RX_MCAST_BUF_CFG[SIZE]. If the number of free buffers is
+ * insufficient for a received multicast packet, hardware tail drops the
+ * packet and sets NIX_AF_GEN_INT[RX_MCAST_DROP]. Hardware prioritizes
+ * the processing of RX mirror packets over RX multicast packets.
+ */
+union nixx_af_rx_mcast_buf_base {
+ u64 u;
+ struct nixx_af_rx_mcast_buf_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_rx_mcast_buf_base_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_BUF_BASE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_BUF_BASE(void)
+{
+ return 0x120;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_buf_cfg
+ *
+ * NIX AF Receive Multicast Buffer Configuration Register See
+ * NIX_AF_RX_MCAST_BUF_BASE.
+ */
+union nixx_af_rx_mcast_buf_cfg {
+ u64 u;
+ struct nixx_af_rx_mcast_buf_cfg_s {
+ u64 size : 4;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_21_23 : 3;
+ u64 npc_replay_pkind : 6;
+ u64 reserved_30_31 : 2;
+ u64 free_buf_level : 11;
+ u64 reserved_43_61 : 19;
+ u64 busy : 1;
+ u64 ena : 1;
+ } s;
+ struct nixx_af_rx_mcast_buf_cfg_cn96xxp1 {
+ u64 size : 4;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_21_23 : 3;
+ u64 npc_replay_pkind : 6;
+ u64 reserved_30_31 : 2;
+ u64 free_buf_level : 11;
+ u64 reserved_43_61 : 19;
+ u64 reserved_62 : 1;
+ u64 ena : 1;
+ } cn96xxp1;
+ /* struct nixx_af_rx_mcast_buf_cfg_s cn96xxp3; */
+ struct nixx_af_rx_mcast_buf_cfg_cnf95xxp1 {
+ u64 size : 4;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_21_23 : 3;
+ u64 npc_replay_pkind : 6;
+ u64 reserved_30_31 : 2;
+ u64 free_buf_level : 11;
+ u64 reserved_43_62 : 20;
+ u64 ena : 1;
+ } cnf95xxp1;
+ /* struct nixx_af_rx_mcast_buf_cfg_s cnf95xxp2; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_BUF_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_BUF_CFG(void)
+{
+ return 0x130;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_cfg
+ *
+ * NIX AF Receive Multicast/Mirror Table Configuration Register See
+ * NIX_AF_RX_MCAST_BASE.
+ */
+union nixx_af_rx_mcast_cfg {
+ u64 u;
+ struct nixx_af_rx_mcast_cfg_s {
+ u64 size : 4;
+ u64 max_list_lenm1 : 8;
+ u64 reserved_12_19 : 8;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_37_63 : 27;
+ } s;
+ /* struct nixx_af_rx_mcast_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_CFG(void)
+{
+ return 0x110;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mirror_buf_base
+ *
+ * NIX AF Receive Mirror Buffer Base Address Register This register
+ * specifies the base AF IOVA of the receive mirror buffers in
+ * NDC/LLC/DRAM. These buffers are used to temporarily store packets
+ * whose action returned by NPC has NIX_RX_ACTION_S[OP] =
+ * NIX_RX_ACTIONOP_E::MIRROR. The number of buffers is configured by
+ * NIX_AF_RX_MIRROR_BUF_CFG[SIZE]. If the number of free buffers is
+ * insufficient for a received multicast packet, hardware tail drops the
+ * packet and sets NIX_AF_GEN_INT[RX_MIRROR_DROP]. Hardware prioritizes
+ * the processing of RX mirror packets over RX multicast packets.
+ */
+union nixx_af_rx_mirror_buf_base {
+ u64 u;
+ struct nixx_af_rx_mirror_buf_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_rx_mirror_buf_base_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MIRROR_BUF_BASE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MIRROR_BUF_BASE(void)
+{
+ return 0x140;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mirror_buf_cfg
+ *
+ * NIX AF Receive Mirror Buffer Configuration Register See
+ * NIX_AF_RX_MIRROR_BUF_BASE.
+ */
+union nixx_af_rx_mirror_buf_cfg {
+ u64 u;
+ struct nixx_af_rx_mirror_buf_cfg_s {
+ u64 size : 4;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_21_23 : 3;
+ u64 npc_replay_pkind : 6;
+ u64 reserved_30_31 : 2;
+ u64 free_buf_level : 11;
+ u64 reserved_43_61 : 19;
+ u64 busy : 1;
+ u64 ena : 1;
+ } s;
+ struct nixx_af_rx_mirror_buf_cfg_cn96xxp1 {
+ u64 size : 4;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_21_23 : 3;
+ u64 npc_replay_pkind : 6;
+ u64 reserved_30_31 : 2;
+ u64 free_buf_level : 11;
+ u64 reserved_43_61 : 19;
+ u64 reserved_62 : 1;
+ u64 ena : 1;
+ } cn96xxp1;
+ /* struct nixx_af_rx_mirror_buf_cfg_s cn96xxp3; */
+ struct nixx_af_rx_mirror_buf_cfg_cnf95xxp1 {
+ u64 size : 4;
+ u64 way_mask : 16;
+ u64 caching : 1;
+ u64 reserved_21_23 : 3;
+ u64 npc_replay_pkind : 6;
+ u64 reserved_30_31 : 2;
+ u64 free_buf_level : 11;
+ u64 reserved_43_62 : 20;
+ u64 ena : 1;
+ } cnf95xxp1;
+ /* struct nixx_af_rx_mirror_buf_cfg_s cnf95xxp2; */
+};
+
+static inline u64 NIXX_AF_RX_MIRROR_BUF_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MIRROR_BUF_CFG(void)
+{
+ return 0x148;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mc_drop
+ *
+ * NIX AF Multicast Drop Statistics Register The counter increments for
+ * every dropped MC packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mc_drop {
+ u64 u;
+ struct nixx_af_rx_npc_mc_drop_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_rx_npc_mc_drop_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MC_DROP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MC_DROP(void)
+{
+ return 0x4710;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mc_rcv
+ *
+ * NIX AF Multicast Receive Statistics Register The counter increments
+ * for every received MC packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mc_rcv {
+ u64 u;
+ struct nixx_af_rx_npc_mc_rcv_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_rx_npc_mc_rcv_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MC_RCV(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MC_RCV(void)
+{
+ return 0x4700;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mirror_drop
+ *
+ * NIX AF Mirror Drop Statistics Register The counter increments for
+ * every dropped MIRROR packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mirror_drop {
+ u64 u;
+ struct nixx_af_rx_npc_mirror_drop_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_rx_npc_mirror_drop_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MIRROR_DROP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MIRROR_DROP(void)
+{
+ return 0x4730;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mirror_rcv
+ *
+ * NIX AF Mirror Receive Statistics Register The counter increments for
+ * every received MIRROR packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mirror_rcv {
+ u64 u;
+ struct nixx_af_rx_npc_mirror_rcv_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_rx_npc_mirror_rcv_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MIRROR_RCV(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MIRROR_RCV(void)
+{
+ return 0x4720;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_sw_sync
+ *
+ * NIX AF Receive Software Sync Register
+ */
+union nixx_af_rx_sw_sync {
+ u64 u;
+ struct nixx_af_rx_sw_sync_s {
+ u64 ena : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_rx_sw_sync_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_SW_SYNC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_SW_SYNC(void)
+{
+ return 0x550;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_hw_xoff#
+ *
+ * NIX AF SDP Transmit Link Hardware Controlled XOFF Registers .
+ */
+union nixx_af_sdp_hw_xoffx {
+ u64 u;
+ struct nixx_af_sdp_hw_xoffx_s {
+ u64 chan_xoff : 64;
+ } s;
+ /* struct nixx_af_sdp_hw_xoffx_s cn; */
+};
+
+static inline u64 NIXX_AF_SDP_HW_XOFFX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_HW_XOFFX(u64 a)
+{
+ return 0xac0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_link_credit
+ *
+ * NIX AF Transmit Link SDP Credit Register This register tracks SDP link
+ * credits.
+ */
+union nixx_af_sdp_link_credit {
+ u64 u;
+ struct nixx_af_sdp_link_credit_s {
+ u64 reserved_0 : 1;
+ u64 cc_enable : 1;
+ u64 cc_packet_cnt : 10;
+ u64 cc_unit_cnt : 20;
+ u64 reserved_32_62 : 31;
+ u64 pse_pkt_id_lmt : 1;
+ } s;
+ struct nixx_af_sdp_link_credit_cn96xx {
+ u64 reserved_0 : 1;
+ u64 cc_enable : 1;
+ u64 cc_packet_cnt : 10;
+ u64 cc_unit_cnt : 20;
+ u64 reserved_32_62 : 31;
+ u64 reserved_63 : 1;
+ } cn96xx;
+ /* struct nixx_af_sdp_link_credit_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_SDP_LINK_CREDIT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_LINK_CREDIT(void)
+{
+ return 0xa40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_sw_xoff#
+ *
+ * INTERNAL: NIX AF SDP Transmit Link Software Controlled XOFF Registers
+ * Internal: Defeatured registers. Software should use
+ * NIX_AF_TL4()_SW_XOFF registers instead.
+ */
+union nixx_af_sdp_sw_xoffx {
+ u64 u;
+ struct nixx_af_sdp_sw_xoffx_s {
+ u64 chan_xoff : 64;
+ } s;
+ /* struct nixx_af_sdp_sw_xoffx_s cn; */
+};
+
+static inline u64 NIXX_AF_SDP_SW_XOFFX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_SW_XOFFX(u64 a)
+{
+ return 0xa60 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_tx_fifo_status
+ *
+ * NIX AF SDP Transmit FIFO Status Register Status of FIFO which
+ * transmits packets to SDP.
+ */
+union nixx_af_sdp_tx_fifo_status {
+ u64 u;
+ struct nixx_af_sdp_tx_fifo_status_s {
+ u64 count : 12;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct nixx_af_sdp_tx_fifo_status_s cn; */
+};
+
+static inline u64 NIXX_AF_SDP_TX_FIFO_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_TX_FIFO_STATUS(void)
+{
+ return 0x650;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_active_cycles_pc#
+ *
+ * NIX AF Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_seb_active_cycles_pcx {
+ u64 u;
+ struct nixx_af_seb_active_cycles_pcx_s {
+ u64 act_cyc : 64;
+ } s;
+ /* struct nixx_af_seb_active_cycles_pcx_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_ACTIVE_CYCLES_PCX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_ACTIVE_CYCLES_PCX(u64 a)
+{
+ return 0x6c0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_bp_test
+ *
+ * INTERNAL: NIX AF SEB Backpressure Test Register
+ */
+union nixx_af_seb_bp_test {
+ u64 u;
+ struct nixx_af_seb_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 14;
+ u64 reserved_30_47 : 18;
+ u64 enable : 7;
+ u64 reserved_55_63 : 9;
+ } s;
+ /* struct nixx_af_seb_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_BP_TEST(void)
+{
+ return 0x630;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_cfg
+ *
+ * NIX SEB Configuration Register
+ */
+union nixx_af_seb_cfg {
+ u64 u;
+ struct nixx_af_seb_cfg_s {
+ u64 sg_ndc_sel : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_seb_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_CFG(void)
+{
+ return 0x5f0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_eco
+ *
+ * INTERNAL: AF SEB ECO Register
+ */
+union nixx_af_seb_eco {
+ u64 u;
+ struct nixx_af_seb_eco_s {
+ u64 eco_rw : 64;
+ } s;
+ /* struct nixx_af_seb_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_ECO(void)
+{
+ return 0x5c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_pipe_bp_test#
+ *
+ * INTERNAL: NIX AF SEB Pipe Backpressure Test Registers
+ */
+union nixx_af_seb_pipe_bp_testx {
+ u64 u;
+ struct nixx_af_seb_pipe_bp_testx_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 24;
+ u64 reserved_40_47 : 8;
+ u64 enable : 12;
+ u64 reserved_60_63 : 4;
+ } s;
+ /* struct nixx_af_seb_pipe_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_PIPE_BP_TESTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_PIPE_BP_TESTX(u64 a)
+{
+ return 0x600 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_pipeb_bp_test#
+ *
+ * INTERNAL: NIX AF SEB Pipe Backpressure Test Registers
+ */
+union nixx_af_seb_pipeb_bp_testx {
+ u64 u;
+ struct nixx_af_seb_pipeb_bp_testx_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 18;
+ u64 reserved_34_47 : 14;
+ u64 enable : 9;
+ u64 reserved_57_63 : 7;
+ } s;
+ /* struct nixx_af_seb_pipeb_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_PIPEB_BP_TESTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_PIPEB_BP_TESTX(u64 a)
+{
+ return 0x608 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_wd_tick_divider
+ *
+ * INTERNAL: NIX AF SEB TSTMP Watchdog Tick Divider Register
+ */
+union nixx_af_seb_wd_tick_divider {
+ u64 u;
+ struct nixx_af_seb_wd_tick_divider_s {
+ u64 tick_div_cfg : 7;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct nixx_af_seb_wd_tick_divider_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_WD_TICK_DIVIDER(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_WD_TICK_DIVIDER(void)
+{
+ return 0x6f0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_cfg
+ *
+ * NIX AF SQM PSE Queue Configuration Registers
+ */
+union nixx_af_smqx_cfg {
+ u64 u;
+ struct nixx_af_smqx_cfg_s {
+ u64 minlen : 7;
+ u64 desc_shp_ctl_dis : 1;
+ u64 maxlen : 16;
+ u64 lf : 7;
+ u64 reserved_31_35 : 5;
+ u64 max_vtag_ins : 3;
+ u64 rr_minlen : 9;
+ u64 express : 1;
+ u64 flush : 1;
+ u64 enq_xoff : 1;
+ u64 pri_thr : 6;
+ u64 reserved_57_63 : 7;
+ } s;
+ /* struct nixx_af_smqx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_CFG(u64 a)
+{
+ return 0x700 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_head
+ *
+ * NIX AF SQM SMQ Head Register These registers track the head of the SMQ
+ * linked list.
+ */
+union nixx_af_smqx_head {
+ u64 u;
+ struct nixx_af_smqx_head_s {
+ u64 sq_idx : 20;
+ u64 valid : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct nixx_af_smqx_head_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_HEAD(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_HEAD(u64 a)
+{
+ return 0x710 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_nxt_head
+ *
+ * NIX AF SQM SMQ Next Head Register These registers track the next head
+ * of the SMQ linked list.
+ */
+union nixx_af_smqx_nxt_head {
+ u64 u;
+ struct nixx_af_smqx_nxt_head_s {
+ u64 sq_idx : 20;
+ u64 valid : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct nixx_af_smqx_nxt_head_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_NXT_HEAD(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_NXT_HEAD(u64 a)
+{
+ return 0x740 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_status
+ *
+ * NIX AF SQM SMQ Status Register These registers track the status of the
+ * SMQ FIFO.
+ */
+union nixx_af_smqx_status {
+ u64 u;
+ struct nixx_af_smqx_status_s {
+ u64 level : 7;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct nixx_af_smqx_status_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_STATUS(u64 a)
+{
+ return 0x730 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_tail
+ *
+ * NIX AF SQM SMQ Head Register These registers track the tail of SMQ
+ * linked list.
+ */
+union nixx_af_smqx_tail {
+ u64 u;
+ struct nixx_af_smqx_tail_s {
+ u64 sq_idx : 20;
+ u64 valid : 1;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct nixx_af_smqx_tail_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_TAIL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_TAIL(u64 a)
+{
+ return 0x720 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sq_const
+ *
+ * NIX AF SQ Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_sq_const {
+ u64 u;
+ struct nixx_af_sq_const_s {
+ u64 queues_per_lf : 24;
+ u64 smq_depth : 10;
+ u64 sqb_size : 16;
+ u64 reserved_50_63 : 14;
+ } s;
+ /* struct nixx_af_sq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_SQ_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQ_CONST(void)
+{
+ return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_active_cycles_pc
+ *
+ * NIX AF SQM Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_sqm_active_cycles_pc {
+ u64 u;
+ struct nixx_af_sqm_active_cycles_pc_s {
+ u64 act_cyc : 64;
+ } s;
+ /* struct nixx_af_sqm_active_cycles_pc_s cn; */
+};
+
+static inline u64 NIXX_AF_SQM_ACTIVE_CYCLES_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_ACTIVE_CYCLES_PC(void)
+{
+ return 0x770;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_bp_test#
+ *
+ * INTERNAL: NIX AF SQM Backpressure Test Register
+ */
+union nixx_af_sqm_bp_testx {
+ u64 u;
+ struct nixx_af_sqm_bp_testx_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 8;
+ u64 reserved_24_59 : 36;
+ u64 enable : 4;
+ } s;
+ /* struct nixx_af_sqm_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_SQM_BP_TESTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_BP_TESTX(u64 a)
+{
+ return 0x760 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_dbg_ctl_status
+ *
+ * NIX AF SQM Debug Register This register is for SQM diagnostic use
+ * only.
+ */
+union nixx_af_sqm_dbg_ctl_status {
+ u64 u;
+ struct nixx_af_sqm_dbg_ctl_status_s {
+ u64 tm1 : 8;
+ u64 tm2 : 1;
+ u64 tm3 : 4;
+ u64 tm4 : 1;
+ u64 tm5 : 1;
+ u64 tm6 : 1;
+ u64 tm7 : 4;
+ u64 tm8 : 1;
+ u64 tm9 : 1;
+ u64 tm10 : 1;
+ u64 tm11 : 1;
+ u64 tm12 : 1;
+ u64 tm13 : 1;
+ u64 reserved_26_63 : 38;
+ } s;
+ struct nixx_af_sqm_dbg_ctl_status_cn96xxp1 {
+ u64 tm1 : 8;
+ u64 tm2 : 1;
+ u64 tm3 : 4;
+ u64 tm4 : 1;
+ u64 tm5 : 1;
+ u64 tm6 : 1;
+ u64 tm7 : 4;
+ u64 tm8 : 1;
+ u64 tm9 : 1;
+ u64 reserved_22_63 : 42;
+ } cn96xxp1;
+ /* struct nixx_af_sqm_dbg_ctl_status_s cn96xxp3; */
+ /* struct nixx_af_sqm_dbg_ctl_status_cn96xxp1 cnf95xxp1; */
+ struct nixx_af_sqm_dbg_ctl_status_cnf95xxp2 {
+ u64 tm1 : 8;
+ u64 tm2 : 1;
+ u64 tm3 : 4;
+ u64 tm4 : 1;
+ u64 tm5 : 1;
+ u64 tm6 : 1;
+ u64 tm7 : 4;
+ u64 tm8 : 1;
+ u64 tm9 : 1;
+ u64 reserved_22 : 1;
+ u64 reserved_23 : 1;
+ u64 reserved_24 : 1;
+ u64 reserved_25 : 1;
+ u64 reserved_26_63 : 38;
+ } cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_SQM_DBG_CTL_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_DBG_CTL_STATUS(void)
+{
+ return 0x750;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_eco
+ *
+ * INTERNAL: AF SQM ECO Register
+ */
+union nixx_af_sqm_eco {
+ u64 u;
+ struct nixx_af_sqm_eco_s {
+ u64 eco_rw : 64;
+ } s;
+ /* struct nixx_af_sqm_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_SQM_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_ECO(void)
+{
+ return 0x5b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_status
+ *
+ * NIX AF General Status Register
+ */
+union nixx_af_status {
+ u64 u;
+ struct nixx_af_status_s {
+ u64 blk_busy : 10;
+ u64 calibrate_done : 1;
+ u64 reserved_11_15 : 5;
+ u64 calibrate_status : 15;
+ u64 reserved_31_63 : 33;
+ } s;
+ /* struct nixx_af_status_s cn; */
+};
+
+static inline u64 NIXX_AF_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_STATUS(void)
+{
+ return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tcp_timer
+ *
+ * NIX TCP Timer Register
+ */
+union nixx_af_tcp_timer {
+ u64 u;
+ struct nixx_af_tcp_timer_s {
+ u64 dur_counter : 16;
+ u64 lf_counter : 8;
+ u64 reserved_24_31 : 8;
+ u64 duration : 16;
+ u64 reserved_48_62 : 15;
+ u64 ena : 1;
+ } s;
+ /* struct nixx_af_tcp_timer_s cn; */
+};
+
+static inline u64 NIXX_AF_TCP_TIMER(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TCP_TIMER(void)
+{
+ return 0x1e0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_cir
+ *
+ * NIX AF Transmit Level 1 Committed Information Rate Register
+ */
+union nixx_af_tl1x_cir {
+ u64 u;
+ struct nixx_af_tl1x_cir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl1x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_CIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_CIR(u64 a)
+{
+ return 0xc20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_dropped_bytes
+ *
+ * NIX AF Transmit Level 1 Dropped Bytes Registers This register has the
+ * same bit fields as NIX_AF_TL1()_GREEN_BYTES.
+ */
+union nixx_af_tl1x_dropped_bytes {
+ u64 u;
+ struct nixx_af_tl1x_dropped_bytes_s {
+ u64 count : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_tl1x_dropped_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_DROPPED_BYTES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_DROPPED_BYTES(u64 a)
+{
+ return 0xd30 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_dropped_packets
+ *
+ * NIX AF Transmit Level 1 Dropped Packets Registers This register has
+ * the same bit fields as NIX_AF_TL1()_GREEN_PACKETS.
+ */
+union nixx_af_tl1x_dropped_packets {
+ u64 u;
+ struct nixx_af_tl1x_dropped_packets_s {
+ u64 count : 40;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_tl1x_dropped_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_DROPPED_PACKETS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_DROPPED_PACKETS(u64 a)
+{
+ return 0xd20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_green
+ *
+ * INTERNAL: NIX Transmit Level 1 Green State Debug Register
+ */
+union nixx_af_tl1x_green {
+ u64 u;
+ struct nixx_af_tl1x_green_s {
+ u64 tail : 8;
+ u64 reserved_8_9 : 2;
+ u64 head : 8;
+ u64 reserved_18_19 : 2;
+ u64 active_vec : 20;
+ u64 rr_active : 1;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl1x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_GREEN(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_GREEN(u64 a)
+{
+ return 0xc90 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_green_bytes
+ *
+ * NIX AF Transmit Level 1 Green Sent Bytes Registers
+ */
+union nixx_af_tl1x_green_bytes {
+ u64 u;
+ struct nixx_af_tl1x_green_bytes_s {
+ u64 count : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_tl1x_green_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_GREEN_BYTES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_GREEN_BYTES(u64 a)
+{
+ return 0xd90 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_green_packets
+ *
+ * NIX AF Transmit Level 1 Green Sent Packets Registers
+ */
+union nixx_af_tl1x_green_packets {
+ u64 u;
+ struct nixx_af_tl1x_green_packets_s {
+ u64 count : 40;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_tl1x_green_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_GREEN_PACKETS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_GREEN_PACKETS(u64 a)
+{
+ return 0xd80 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug0
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 0 Registers
+ * NIX_AF_TL1()_MD_DEBUG0, NIX_AF_TL1()_MD_DEBUG1, NIX_AF_TL1()_MD_DEBUG2
+ * and NIX_AF_TL1()_MD_DEBUG3 provide access to the TLn queue meta
+ * descriptor. A TLn queue can hold up to two packet meta descriptors
+ * (PMD) and one flush meta descriptor (FMD): * PMD0 state is accessed
+ * with [PMD0_VLD], [PMD0_LENGTH] and NIX_AF_TL1()_MD_DEBUG1. * PMD1 is
+ * accessed with [PMD1_VLD], [PMD1_LENGTH] and NIX_AF_TL1()_MD_DEBUG2. *
+ * FMD is accessed with NIX_AF_TL1()_MD_DEBUG3.
+ */
+union nixx_af_tl1x_md_debug0 {
+ u64 u;
+ struct nixx_af_tl1x_md_debug0_s {
+ u64 pmd0_length : 16;
+ u64 pmd1_length : 16;
+ u64 pmd0_vld : 1;
+ u64 pmd1_vld : 1;
+ u64 reserved_34_45 : 12;
+ u64 drain_pri : 1;
+ u64 drain : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 pmd_count : 1;
+ } s;
+ /* struct nixx_af_tl1x_md_debug0_s cn96xxp1; */
+ struct nixx_af_tl1x_md_debug0_cn96xxp3 {
+ u64 pmd0_length : 16;
+ u64 reserved_16_31 : 16;
+ u64 pmd0_vld : 1;
+ u64 reserved_33 : 1;
+ u64 reserved_34_45 : 12;
+ u64 reserved_46 : 1;
+ u64 reserved_47 : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl1x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG0(u64 a)
+{
+ return 0xcc0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug1
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl1x_md_debug1 {
+ u64 u;
+ struct nixx_af_tl1x_md_debug1_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl1x_md_debug1_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl1x_md_debug1_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl1x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG1(u64 a)
+{
+ return 0xcc8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug2
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl1x_md_debug2 {
+ u64 u;
+ struct nixx_af_tl1x_md_debug2_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl1x_md_debug2_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl1x_md_debug2_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl1x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG2(u64 a)
+{
+ return 0xcd0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug3
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl1x_md_debug3 {
+ u64 u;
+ struct nixx_af_tl1x_md_debug3_s {
+ u64 reserved_0_36 : 37;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ /* struct nixx_af_tl1x_md_debug3_s cn96xxp1; */
+ struct nixx_af_tl1x_md_debug3_cn96xxp3 {
+ u64 reserved_0_36 : 37;
+ u64 reserved_37_38 : 2;
+ u64 reserved_39_51 : 13;
+ u64 reserved_52_61 : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl1x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG3(u64 a)
+{
+ return 0xcd8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_red
+ *
+ * INTERNAL: NIX Transmit Level 1 Red State Debug Register This register
+ * has the same bit fields as NIX_AF_TL1()_YELLOW.
+ */
+union nixx_af_tl1x_red {
+ u64 u;
+ struct nixx_af_tl1x_red_s {
+ u64 tail : 8;
+ u64 reserved_8_9 : 2;
+ u64 head : 8;
+ u64 reserved_18_63 : 46;
+ } s;
+ /* struct nixx_af_tl1x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_RED(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_RED(u64 a)
+{
+ return 0xcb0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_red_bytes
+ *
+ * NIX AF Transmit Level 1 Red Sent Bytes Registers This register has the
+ * same bit fields as NIX_AF_TL1()_GREEN_BYTES.
+ */
+union nixx_af_tl1x_red_bytes {
+ u64 u;
+ struct nixx_af_tl1x_red_bytes_s {
+ u64 count : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_tl1x_red_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_RED_BYTES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_RED_BYTES(u64 a)
+{
+ return 0xd50 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_red_packets
+ *
+ * NIX AF Transmit Level 1 Red Sent Packets Registers This register has
+ * the same bit fields as NIX_AF_TL1()_GREEN_PACKETS.
+ */
+union nixx_af_tl1x_red_packets {
+ u64 u;
+ struct nixx_af_tl1x_red_packets_s {
+ u64 count : 40;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_tl1x_red_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_RED_PACKETS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_RED_PACKETS(u64 a)
+{
+ return 0xd40 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_schedule
+ *
+ * NIX AF Transmit Level 1 Scheduling Control Register
+ */
+union nixx_af_tl1x_schedule {
+ u64 u;
+ struct nixx_af_tl1x_schedule_s {
+ u64 rr_quantum : 24;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_tl1x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_SCHEDULE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SCHEDULE(u64 a)
+{
+ return 0xc00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_shape
+ *
+ * NIX AF Transmit Level 1 Shaping Control Register
+ */
+union nixx_af_tl1x_shape {
+ u64 u;
+ struct nixx_af_tl1x_shape_s {
+ u64 adjust : 9;
+ u64 reserved_9_23 : 15;
+ u64 length_disable : 1;
+ u64 reserved_25_63 : 39;
+ } s;
+ struct nixx_af_tl1x_shape_cn {
+ u64 adjust : 9;
+ u64 reserved_9_17 : 9;
+ u64 reserved_18_23 : 6;
+ u64 length_disable : 1;
+ u64 reserved_25_63 : 39;
+ } cn;
+};
+
+static inline u64 NIXX_AF_TL1X_SHAPE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SHAPE(u64 a)
+{
+ return 0xc10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_shape_state
+ *
+ * NIX AF Transmit Level 1 Shape State Register This register must not be
+ * written during normal operation.
+ */
+union nixx_af_tl1x_shape_state {
+ u64 u;
+ struct nixx_af_tl1x_shape_state_s {
+ u64 cir_accum : 26;
+ u64 reserved_26_51 : 26;
+ u64 color : 1;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct nixx_af_tl1x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_SHAPE_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SHAPE_STATE(u64 a)
+{
+ return 0xc50 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_sw_xoff
+ *
+ * NIX AF Transmit Level 1 Software Controlled XOFF Registers
+ */
+union nixx_af_tl1x_sw_xoff {
+ u64 u;
+ struct nixx_af_tl1x_sw_xoff_s {
+ u64 xoff : 1;
+ u64 drain : 1;
+ u64 reserved_2 : 1;
+ u64 drain_irq : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct nixx_af_tl1x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_SW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SW_XOFF(u64 a)
+{
+ return 0xc70 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_topology
+ *
+ * NIX AF Transmit Level 1 Topology Registers
+ */
+union nixx_af_tl1x_topology {
+ u64 u;
+ struct nixx_af_tl1x_topology_s {
+ u64 reserved_0 : 1;
+ u64 rr_prio : 4;
+ u64 reserved_5_31 : 27;
+ u64 prio_anchor : 8;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_tl1x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_TOPOLOGY(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_TOPOLOGY(u64 a)
+{
+ return 0xc80 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 1 Yellow State Debug Register
+ */
+union nixx_af_tl1x_yellow {
+ u64 u;
+ struct nixx_af_tl1x_yellow_s {
+ u64 tail : 8;
+ u64 reserved_8_9 : 2;
+ u64 head : 8;
+ u64 reserved_18_63 : 46;
+ } s;
+ /* struct nixx_af_tl1x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_YELLOW(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_YELLOW(u64 a)
+{
+ return 0xca0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_yellow_bytes
+ *
+ * NIX AF Transmit Level 1 Yellow Sent Bytes Registers This register has
+ * the same bit fields as NIX_AF_TL1()_GREEN_BYTES.
+ */
+union nixx_af_tl1x_yellow_bytes {
+ u64 u;
+ struct nixx_af_tl1x_yellow_bytes_s {
+ u64 count : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_af_tl1x_yellow_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_YELLOW_BYTES(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_YELLOW_BYTES(u64 a)
+{
+ return 0xd70 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_yellow_packets
+ *
+ * NIX AF Transmit Level 1 Yellow Sent Packets Registers This register
+ * has the same bit fields as NIX_AF_TL1()_GREEN_PACKETS.
+ */
+union nixx_af_tl1x_yellow_packets {
+ u64 u;
+ struct nixx_af_tl1x_yellow_packets_s {
+ u64 count : 40;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_tl1x_yellow_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_YELLOW_PACKETS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_YELLOW_PACKETS(u64 a)
+{
+ return 0xd60 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1_const
+ *
+ * NIX AF Transmit Level 1 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl1_const {
+ u64 u;
+ struct nixx_af_tl1_const_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_tl1_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1_CONST(void)
+{
+ return 0x70;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_cir
+ *
+ * NIX AF Transmit Level 2 Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl2x_cir {
+ u64 u;
+ struct nixx_af_tl2x_cir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl2x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_CIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_CIR(u64 a)
+{
+ return 0xe20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_green
+ *
+ * INTERNAL: NIX Transmit Level 2 Green State Debug Register This
+ * register has the same bit fields as NIX_AF_TL1()_GREEN.
+ */
+union nixx_af_tl2x_green {
+ u64 u;
+ struct nixx_af_tl2x_green_s {
+ u64 tail : 8;
+ u64 reserved_8_9 : 2;
+ u64 head : 8;
+ u64 reserved_18_19 : 2;
+ u64 active_vec : 20;
+ u64 rr_active : 1;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl2x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_GREEN(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_GREEN(u64 a)
+{
+ return 0xe90 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug0
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 0 Registers See
+ * NIX_AF_TL1()_MD_DEBUG0
+ */
+union nixx_af_tl2x_md_debug0 {
+ u64 u;
+ struct nixx_af_tl2x_md_debug0_s {
+ u64 pmd0_length : 16;
+ u64 pmd1_length : 16;
+ u64 pmd0_vld : 1;
+ u64 pmd1_vld : 1;
+ u64 reserved_34_45 : 12;
+ u64 drain_pri : 1;
+ u64 drain : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 pmd_count : 1;
+ } s;
+ /* struct nixx_af_tl2x_md_debug0_s cn96xxp1; */
+ struct nixx_af_tl2x_md_debug0_cn96xxp3 {
+ u64 pmd0_length : 16;
+ u64 reserved_16_31 : 16;
+ u64 pmd0_vld : 1;
+ u64 reserved_33 : 1;
+ u64 reserved_34_45 : 12;
+ u64 reserved_46 : 1;
+ u64 reserved_47 : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl2x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG0(u64 a)
+{
+ return 0xec0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug1
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl2x_md_debug1 {
+ u64 u;
+ struct nixx_af_tl2x_md_debug1_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl2x_md_debug1_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl2x_md_debug1_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl2x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG1(u64 a)
+{
+ return 0xec8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug2
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl2x_md_debug2 {
+ u64 u;
+ struct nixx_af_tl2x_md_debug2_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl2x_md_debug2_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl2x_md_debug2_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl2x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG2(u64 a)
+{
+ return 0xed0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug3
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl2x_md_debug3 {
+ u64 u;
+ struct nixx_af_tl2x_md_debug3_s {
+ u64 reserved_0_36 : 37;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ /* struct nixx_af_tl2x_md_debug3_s cn96xxp1; */
+ struct nixx_af_tl2x_md_debug3_cn96xxp3 {
+ u64 reserved_0_36 : 37;
+ u64 reserved_37_38 : 2;
+ u64 reserved_39_51 : 13;
+ u64 reserved_52_61 : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl2x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG3(u64 a)
+{
+ return 0xed8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_parent
+ *
+ * NIX AF Transmit Level 2 Parent Registers
+ */
+union nixx_af_tl2x_parent {
+ u64 u;
+ struct nixx_af_tl2x_parent_s {
+ u64 reserved_0_15 : 16;
+ u64 parent : 5;
+ u64 reserved_21_63 : 43;
+ } s;
+ /* struct nixx_af_tl2x_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_PARENT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_PARENT(u64 a)
+{
+ return 0xe88 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_pir
+ *
+ * NIX AF Transmit Level 2 Peak Information Rate Registers This register
+ * has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl2x_pir {
+ u64 u;
+ struct nixx_af_tl2x_pir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl2x_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_PIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_PIR(u64 a)
+{
+ return 0xe30 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_pointers
+ *
+ * INTERNAL: NIX Transmit Level 2 Linked List Pointers Debug Register
+ */
+union nixx_af_tl2x_pointers {
+ u64 u;
+ struct nixx_af_tl2x_pointers_s {
+ u64 next : 8;
+ u64 reserved_8_15 : 8;
+ u64 prev : 8;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_tl2x_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_POINTERS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_POINTERS(u64 a)
+{
+ return 0xe60 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_red
+ *
+ * INTERNAL: NIX Transmit Level 2 Red State Debug Register This register
+ * has the same bit fields as NIX_AF_TL1()_RED.
+ */
+union nixx_af_tl2x_red {
+ u64 u;
+ struct nixx_af_tl2x_red_s {
+ u64 tail : 8;
+ u64 reserved_8_9 : 2;
+ u64 head : 8;
+ u64 reserved_18_63 : 46;
+ } s;
+ /* struct nixx_af_tl2x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_RED(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_RED(u64 a)
+{
+ return 0xeb0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_sched_state
+ *
+ * NIX AF Transmit Level 2 Scheduling Control State Registers
+ */
+union nixx_af_tl2x_sched_state {
+ u64 u;
+ struct nixx_af_tl2x_sched_state_s {
+ u64 rr_count : 25;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_tl2x_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SCHED_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SCHED_STATE(u64 a)
+{
+ return 0xe40 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_schedule
+ *
+ * NIX AF Transmit Level 2 Scheduling Control Registers
+ */
+union nixx_af_tl2x_schedule {
+ u64 u;
+ struct nixx_af_tl2x_schedule_s {
+ u64 rr_quantum : 24;
+ u64 prio : 4;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_tl2x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SCHEDULE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SCHEDULE(u64 a)
+{
+ return 0xe00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_shape
+ *
+ * NIX AF Transmit Level 2 Shaping Control Registers
+ */
+union nixx_af_tl2x_shape {
+ u64 u;
+ struct nixx_af_tl2x_shape_s {
+ u64 adjust : 9;
+ u64 red_algo : 2;
+ u64 red_disable : 1;
+ u64 yellow_disable : 1;
+ u64 reserved_13_23 : 11;
+ u64 length_disable : 1;
+ u64 schedule_list : 2;
+ u64 reserved_27_63 : 37;
+ } s;
+ /* struct nixx_af_tl2x_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SHAPE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SHAPE(u64 a)
+{
+ return 0xe10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_shape_state
+ *
+ * NIX AF Transmit Level 2 Shape State Registers This register must not
+ * be written during normal operation.
+ */
+union nixx_af_tl2x_shape_state {
+ u64 u;
+ struct nixx_af_tl2x_shape_state_s {
+ u64 cir_accum : 26;
+ u64 pir_accum : 26;
+ u64 color : 2;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct nixx_af_tl2x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SHAPE_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SHAPE_STATE(u64 a)
+{
+ return 0xe50 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_sw_xoff
+ *
+ * NIX AF Transmit Level 2 Software Controlled XOFF Registers This
+ * register has the same bit fields as NIX_AF_TL1()_SW_XOFF.
+ */
+union nixx_af_tl2x_sw_xoff {
+ u64 u;
+ struct nixx_af_tl2x_sw_xoff_s {
+ u64 xoff : 1;
+ u64 drain : 1;
+ u64 reserved_2 : 1;
+ u64 drain_irq : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct nixx_af_tl2x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SW_XOFF(u64 a)
+{
+ return 0xe70 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_topology
+ *
+ * NIX AF Transmit Level 2 Topology Registers
+ */
+union nixx_af_tl2x_topology {
+ u64 u;
+ struct nixx_af_tl2x_topology_s {
+ u64 reserved_0 : 1;
+ u64 rr_prio : 4;
+ u64 reserved_5_31 : 27;
+ u64 prio_anchor : 8;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct nixx_af_tl2x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_TOPOLOGY(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_TOPOLOGY(u64 a)
+{
+ return 0xe80 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 2 Yellow State Debug Register This
+ * register has the same bit fields as NIX_AF_TL1()_YELLOW.
+ */
+union nixx_af_tl2x_yellow {
+ u64 u;
+ struct nixx_af_tl2x_yellow_s {
+ u64 tail : 8;
+ u64 reserved_8_9 : 2;
+ u64 head : 8;
+ u64 reserved_18_63 : 46;
+ } s;
+ /* struct nixx_af_tl2x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_YELLOW(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_YELLOW(u64 a)
+{
+ return 0xea0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2_const
+ *
+ * NIX AF Transmit Level 2 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl2_const {
+ u64 u;
+ struct nixx_af_tl2_const_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_tl2_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2_CONST(void)
+{
+ return 0x78;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_cir
+ *
+ * NIX AF Transmit Level 3 Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl3x_cir {
+ u64 u;
+ struct nixx_af_tl3x_cir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl3x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_CIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_CIR(u64 a)
+{
+ return 0x1020 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_green
+ *
+ * INTERNAL: NIX Transmit Level 3 Green State Debug Register
+ */
+union nixx_af_tl3x_green {
+ u64 u;
+ struct nixx_af_tl3x_green_s {
+ u64 tail : 9;
+ u64 reserved_9 : 1;
+ u64 head : 9;
+ u64 reserved_19 : 1;
+ u64 active_vec : 20;
+ u64 rr_active : 1;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl3x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_GREEN(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_GREEN(u64 a)
+{
+ return 0x1090 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug0
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 0 Registers See
+ * NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug0 {
+ u64 u;
+ struct nixx_af_tl3x_md_debug0_s {
+ u64 pmd0_length : 16;
+ u64 pmd1_length : 16;
+ u64 pmd0_vld : 1;
+ u64 pmd1_vld : 1;
+ u64 reserved_34_45 : 12;
+ u64 drain_pri : 1;
+ u64 drain : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 pmd_count : 1;
+ } s;
+ /* struct nixx_af_tl3x_md_debug0_s cn96xxp1; */
+ struct nixx_af_tl3x_md_debug0_cn96xxp3 {
+ u64 pmd0_length : 16;
+ u64 reserved_16_31 : 16;
+ u64 pmd0_vld : 1;
+ u64 reserved_33 : 1;
+ u64 reserved_34_45 : 12;
+ u64 reserved_46 : 1;
+ u64 reserved_47 : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl3x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG0(u64 a)
+{
+ return 0x10c0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug1
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug1 {
+ u64 u;
+ struct nixx_af_tl3x_md_debug1_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl3x_md_debug1_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl3x_md_debug1_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl3x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG1(u64 a)
+{
+ return 0x10c8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug2
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug2 {
+ u64 u;
+ struct nixx_af_tl3x_md_debug2_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl3x_md_debug2_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl3x_md_debug2_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl3x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG2(u64 a)
+{
+ return 0x10d0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug3
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug3 {
+ u64 u;
+ struct nixx_af_tl3x_md_debug3_s {
+ u64 reserved_0_36 : 37;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ /* struct nixx_af_tl3x_md_debug3_s cn96xxp1; */
+ struct nixx_af_tl3x_md_debug3_cn96xxp3 {
+ u64 reserved_0_36 : 37;
+ u64 reserved_37_38 : 2;
+ u64 reserved_39_51 : 13;
+ u64 reserved_52_61 : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl3x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG3(u64 a)
+{
+ return 0x10d8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_parent
+ *
+ * NIX AF Transmit Level 3 Parent Registers
+ */
+union nixx_af_tl3x_parent {
+ u64 u;
+ struct nixx_af_tl3x_parent_s {
+ u64 reserved_0_15 : 16;
+ u64 parent : 8;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_tl3x_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_PARENT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_PARENT(u64 a)
+{
+ return 0x1088 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_pir
+ *
+ * NIX AF Transmit Level 3 Peak Information Rate Registers This register
+ * has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl3x_pir {
+ u64 u;
+ struct nixx_af_tl3x_pir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl3x_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_PIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_PIR(u64 a)
+{
+ return 0x1030 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_pointers
+ *
+ * INTERNAL: NIX Transmit Level 3 Linked List Pointers Debug Register
+ * This register has the same bit fields as NIX_AF_TL2()_POINTERS.
+ */
+union nixx_af_tl3x_pointers {
+ u64 u;
+ struct nixx_af_tl3x_pointers_s {
+ u64 next : 8;
+ u64 reserved_8_15 : 8;
+ u64 prev : 8;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_tl3x_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_POINTERS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_POINTERS(u64 a)
+{
+ return 0x1060 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_red
+ *
+ * INTERNAL: NIX Transmit Level 3 Red State Debug Register This register
+ * has the same bit fields as NIX_AF_TL3()_YELLOW.
+ */
+union nixx_af_tl3x_red {
+ u64 u;
+ struct nixx_af_tl3x_red_s {
+ u64 tail : 9;
+ u64 reserved_9 : 1;
+ u64 head : 9;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_tl3x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_RED(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_RED(u64 a)
+{
+ return 0x10b0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_sched_state
+ *
+ * NIX AF Transmit Level 3 Scheduling Control State Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHED_STATE.
+ */
+union nixx_af_tl3x_sched_state {
+ u64 u;
+ struct nixx_af_tl3x_sched_state_s {
+ u64 rr_count : 25;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_tl3x_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SCHED_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SCHED_STATE(u64 a)
+{
+ return 0x1040 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_schedule
+ *
+ * NIX AF Transmit Level 3 Scheduling Control Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SCHEDULE.
+ */
+union nixx_af_tl3x_schedule {
+ u64 u;
+ struct nixx_af_tl3x_schedule_s {
+ u64 rr_quantum : 24;
+ u64 prio : 4;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_tl3x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SCHEDULE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SCHEDULE(u64 a)
+{
+ return 0x1000 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_shape
+ *
+ * NIX AF Transmit Level 3 Shaping Control Registers
+ */
+union nixx_af_tl3x_shape {
+ u64 u;
+ struct nixx_af_tl3x_shape_s {
+ u64 adjust : 9;
+ u64 red_algo : 2;
+ u64 red_disable : 1;
+ u64 yellow_disable : 1;
+ u64 reserved_13_23 : 11;
+ u64 length_disable : 1;
+ u64 schedule_list : 2;
+ u64 reserved_27_63 : 37;
+ } s;
+ /* struct nixx_af_tl3x_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SHAPE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SHAPE(u64 a)
+{
+ return 0x1010 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_shape_state
+ *
+ * NIX AF Transmit Level 3 Shaping State Registers This register has the
+ * same bit fields as NIX_AF_TL2()_SHAPE_STATE. This register must not be
+ * written during normal operation.
+ */
+union nixx_af_tl3x_shape_state {
+ u64 u;
+ struct nixx_af_tl3x_shape_state_s {
+ u64 cir_accum : 26;
+ u64 pir_accum : 26;
+ u64 color : 2;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct nixx_af_tl3x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SHAPE_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SHAPE_STATE(u64 a)
+{
+ return 0x1050 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_sw_xoff
+ *
+ * NIX AF Transmit Level 3 Software Controlled XOFF Registers This
+ * register has the same bit fields as NIX_AF_TL1()_SW_XOFF
+ */
+union nixx_af_tl3x_sw_xoff {
+ u64 u;
+ struct nixx_af_tl3x_sw_xoff_s {
+ u64 xoff : 1;
+ u64 drain : 1;
+ u64 reserved_2 : 1;
+ u64 drain_irq : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct nixx_af_tl3x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SW_XOFF(u64 a)
+{
+ return 0x1070 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_topology
+ *
+ * NIX AF Transmit Level 3 Topology Registers
+ */
+union nixx_af_tl3x_topology {
+ u64 u;
+ struct nixx_af_tl3x_topology_s {
+ u64 reserved_0 : 1;
+ u64 rr_prio : 4;
+ u64 reserved_5_31 : 27;
+ u64 prio_anchor : 9;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl3x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_TOPOLOGY(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_TOPOLOGY(u64 a)
+{
+ return 0x1080 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 3 Yellow State Debug Register
+ */
+union nixx_af_tl3x_yellow {
+ u64 u;
+ struct nixx_af_tl3x_yellow_s {
+ u64 tail : 9;
+ u64 reserved_9 : 1;
+ u64 head : 9;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_tl3x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_YELLOW(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_YELLOW(u64 a)
+{
+ return 0x10a0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_const
+ *
+ * NIX AF Transmit Level 3 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl3_const {
+ u64 u;
+ struct nixx_af_tl3_const_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_tl3_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_CONST(void)
+{
+ return 0x80;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_tl2#_bp_status
+ *
+ * NIX AF Transmit Level 3/2 Backpressure Status Registers
+ */
+union nixx_af_tl3_tl2x_bp_status {
+ u64 u;
+ struct nixx_af_tl3_tl2x_bp_status_s {
+ u64 hw_xoff : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_tl3_tl2x_bp_status_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_TL2X_BP_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_TL2X_BP_STATUS(u64 a)
+{
+ return 0x1610 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_tl2#_cfg
+ *
+ * NIX AF Transmit Level 3/2 Configuration Registers
+ */
+union nixx_af_tl3_tl2x_cfg {
+ u64 u;
+ struct nixx_af_tl3_tl2x_cfg_s {
+ u64 express : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_tl3_tl2x_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_TL2X_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_TL2X_CFG(u64 a)
+{
+ return 0x1600 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_tl2#_link#_cfg
+ *
+ * NIX AF Transmit Level 3/2 Link Configuration Registers These registers
+ * specify the links and associated channels that a given TL3 or TL2
+ * queue (depending on NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]) can transmit
+ * on. Each TL3/TL2 queue can be enabled to transmit on and be
+ * backpressured by one or more links and associated channels. The last
+ * index (LINK) is enumerated by NIX_LINK_E.
+ */
+union nixx_af_tl3_tl2x_linkx_cfg {
+ u64 u;
+ struct nixx_af_tl3_tl2x_linkx_cfg_s {
+ u64 relchan : 8;
+ u64 reserved_8_11 : 4;
+ u64 ena : 1;
+ u64 bp_ena : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct nixx_af_tl3_tl2x_linkx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_TL2X_LINKX_CFG(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_TL2X_LINKX_CFG(u64 a, u64 b)
+{
+ return 0x1700 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_bp_status
+ *
+ * NIX AF Transmit Level 4 Backpressure Status Registers
+ */
+union nixx_af_tl4x_bp_status {
+ u64 u;
+ struct nixx_af_tl4x_bp_status_s {
+ u64 hw_xoff : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_tl4x_bp_status_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_BP_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_BP_STATUS(u64 a)
+{
+ return 0xb00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_cir
+ *
+ * NIX AF Transmit Level 4 Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl4x_cir {
+ u64 u;
+ struct nixx_af_tl4x_cir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl4x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_CIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_CIR(u64 a)
+{
+ return 0x1220 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_green
+ *
+ * INTERNAL: NIX Transmit Level 4 Green State Debug Register This
+ * register has the same bit fields as NIX_AF_TL3()_GREEN.
+ */
+union nixx_af_tl4x_green {
+ u64 u;
+ struct nixx_af_tl4x_green_s {
+ u64 tail : 9;
+ u64 reserved_9 : 1;
+ u64 head : 9;
+ u64 reserved_19 : 1;
+ u64 active_vec : 20;
+ u64 rr_active : 1;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl4x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_GREEN(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_GREEN(u64 a)
+{
+ return 0x1290 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug0
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 0 Registers See
+ * NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug0 {
+ u64 u;
+ struct nixx_af_tl4x_md_debug0_s {
+ u64 pmd0_length : 16;
+ u64 pmd1_length : 16;
+ u64 pmd0_vld : 1;
+ u64 pmd1_vld : 1;
+ u64 reserved_34_45 : 12;
+ u64 drain_pri : 1;
+ u64 drain : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 pmd_count : 1;
+ } s;
+ /* struct nixx_af_tl4x_md_debug0_s cn96xxp1; */
+ struct nixx_af_tl4x_md_debug0_cn96xxp3 {
+ u64 pmd0_length : 16;
+ u64 reserved_16_31 : 16;
+ u64 pmd0_vld : 1;
+ u64 reserved_33 : 1;
+ u64 reserved_34_45 : 12;
+ u64 reserved_46 : 1;
+ u64 reserved_47 : 1;
+ u64 c_con : 1;
+ u64 p_con : 1;
+ u64 reserved_50_51 : 2;
+ u64 child : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl4x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG0(u64 a)
+{
+ return 0x12c0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug1
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug1 {
+ u64 u;
+ struct nixx_af_tl4x_md_debug1_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl4x_md_debug1_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl4x_md_debug1_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl4x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG1(u64 a)
+{
+ return 0x12c8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug2
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug2 {
+ u64 u;
+ struct nixx_af_tl4x_md_debug2_s {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 reserved_23 : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ struct nixx_af_tl4x_md_debug2_cn96xxp1 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 uid : 4;
+ u64 drain : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp1;
+ struct nixx_af_tl4x_md_debug2_cn96xxp3 {
+ u64 reserved_0_5 : 6;
+ u64 red_algo_override : 2;
+ u64 cir_dis : 1;
+ u64 pir_dis : 1;
+ u64 adjust : 9;
+ u64 reserved_19_22 : 4;
+ u64 flush : 1;
+ u64 bubble : 1;
+ u64 color : 2;
+ u64 pse_pkt_id : 9;
+ u64 reserved_36 : 1;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl4x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG2(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG2(u64 a)
+{
+ return 0x12d0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug3
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug3 {
+ u64 u;
+ struct nixx_af_tl4x_md_debug3_s {
+ u64 reserved_0_36 : 37;
+ u64 tx_pkt_p2x : 2;
+ u64 sqm_pkt_id : 13;
+ u64 mdq_idx : 10;
+ u64 reserved_62 : 1;
+ u64 vld : 1;
+ } s;
+ /* struct nixx_af_tl4x_md_debug3_s cn96xxp1; */
+ struct nixx_af_tl4x_md_debug3_cn96xxp3 {
+ u64 reserved_0_36 : 37;
+ u64 reserved_37_38 : 2;
+ u64 reserved_39_51 : 13;
+ u64 reserved_52_61 : 10;
+ u64 reserved_62 : 1;
+ u64 reserved_63 : 1;
+ } cn96xxp3;
+ /* struct nixx_af_tl4x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG3(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG3(u64 a)
+{
+ return 0x12d8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_parent
+ *
+ * NIX AF Transmit Level 4 Parent Registers
+ */
+union nixx_af_tl4x_parent {
+ u64 u;
+ struct nixx_af_tl4x_parent_s {
+ u64 reserved_0_15 : 16;
+ u64 parent : 8;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_tl4x_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_PARENT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_PARENT(u64 a)
+{
+ return 0x1288 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_pir
+ *
+ * NIX AF Transmit Level 4 Peak Information Rate Registers This register
+ * has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl4x_pir {
+ u64 u;
+ struct nixx_af_tl4x_pir_s {
+ u64 enable : 1;
+ u64 rate_mantissa : 8;
+ u64 rate_exponent : 4;
+ u64 rate_divider_exponent : 4;
+ u64 reserved_17_28 : 12;
+ u64 burst_mantissa : 8;
+ u64 burst_exponent : 4;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl4x_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_PIR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_PIR(u64 a)
+{
+ return 0x1230 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_pointers
+ *
+ * INTERNAL: NIX Transmit Level 4 Linked List Pointers Debug Register
+ * This register has the same bit fields as NIX_AF_TL2()_POINTERS.
+ */
+union nixx_af_tl4x_pointers {
+ u64 u;
+ struct nixx_af_tl4x_pointers_s {
+ u64 next : 9;
+ u64 reserved_9_15 : 7;
+ u64 prev : 9;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_tl4x_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_POINTERS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_POINTERS(u64 a)
+{
+ return 0x1260 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_red
+ *
+ * INTERNAL: NIX Transmit Level 4 Red State Debug Register This register
+ * has the same bit fields as NIX_AF_TL3()_YELLOW.
+ */
+union nixx_af_tl4x_red {
+ u64 u;
+ struct nixx_af_tl4x_red_s {
+ u64 tail : 9;
+ u64 reserved_9 : 1;
+ u64 head : 9;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_tl4x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_RED(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_RED(u64 a)
+{
+ return 0x12b0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_sched_state
+ *
+ * NIX AF Transmit Level 4 Scheduling Control State Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHED_STATE.
+ */
+union nixx_af_tl4x_sched_state {
+ u64 u;
+ struct nixx_af_tl4x_sched_state_s {
+ u64 rr_count : 25;
+ u64 reserved_25_63 : 39;
+ } s;
+ /* struct nixx_af_tl4x_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SCHED_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SCHED_STATE(u64 a)
+{
+ return 0x1240 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_schedule
+ *
+ * NIX AF Transmit Level 4 Scheduling Control Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SCHEDULE.
+ */
+union nixx_af_tl4x_schedule {
+ u64 u;
+ struct nixx_af_tl4x_schedule_s {
+ u64 rr_quantum : 24;
+ u64 prio : 4;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct nixx_af_tl4x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SCHEDULE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SCHEDULE(u64 a)
+{
+ return 0x1200 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_sdp_link_cfg
+ *
+ * NIX AF Transmit Level 4 Link Configuration Registers These registers
+ * specify which TL4 queues transmit to and are optionally backpressured
+ * by SDP.
+ */
+union nixx_af_tl4x_sdp_link_cfg {
+ u64 u;
+ struct nixx_af_tl4x_sdp_link_cfg_s {
+ u64 relchan : 8;
+ u64 reserved_8_11 : 4;
+ u64 ena : 1;
+ u64 bp_ena : 1;
+ u64 reserved_14_63 : 50;
+ } s;
+ /* struct nixx_af_tl4x_sdp_link_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SDP_LINK_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SDP_LINK_CFG(u64 a)
+{
+ return 0xb10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_shape
+ *
+ * NIX AF Transmit Level 4 Shaping Control Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SHAPE.
+ */
+union nixx_af_tl4x_shape {
+ u64 u;
+ struct nixx_af_tl4x_shape_s {
+ u64 adjust : 9;
+ u64 red_algo : 2;
+ u64 red_disable : 1;
+ u64 yellow_disable : 1;
+ u64 reserved_13_23 : 11;
+ u64 length_disable : 1;
+ u64 schedule_list : 2;
+ u64 reserved_27_63 : 37;
+ } s;
+ /* struct nixx_af_tl4x_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SHAPE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SHAPE(u64 a)
+{
+ return 0x1210 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_shape_state
+ *
+ * NIX AF Transmit Level 4 Shaping State Registers This register has the
+ * same bit fields as NIX_AF_TL2()_SHAPE_STATE. This register must not be
+ * written during normal operation.
+ */
+union nixx_af_tl4x_shape_state {
+ u64 u;
+ struct nixx_af_tl4x_shape_state_s {
+ u64 cir_accum : 26;
+ u64 pir_accum : 26;
+ u64 color : 2;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct nixx_af_tl4x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SHAPE_STATE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SHAPE_STATE(u64 a)
+{
+ return 0x1250 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_sw_xoff
+ *
+ * NIX AF Transmit Level 4 Software Controlled XOFF Registers This
+ * register has the same bit fields as NIX_AF_TL1()_SW_XOFF
+ */
+union nixx_af_tl4x_sw_xoff {
+ u64 u;
+ struct nixx_af_tl4x_sw_xoff_s {
+ u64 xoff : 1;
+ u64 drain : 1;
+ u64 reserved_2 : 1;
+ u64 drain_irq : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct nixx_af_tl4x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SW_XOFF(u64 a)
+{
+ return 0x1270 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_topology
+ *
+ * NIX AF Transmit Level 4 Topology Registers
+ */
+union nixx_af_tl4x_topology {
+ u64 u;
+ struct nixx_af_tl4x_topology_s {
+ u64 reserved_0 : 1;
+ u64 rr_prio : 4;
+ u64 reserved_5_31 : 27;
+ u64 prio_anchor : 9;
+ u64 reserved_41_63 : 23;
+ } s;
+ /* struct nixx_af_tl4x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_TOPOLOGY(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_TOPOLOGY(u64 a)
+{
+ return 0x1280 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 4 Yellow State Debug Register This
+ * register has the same bit fields as NIX_AF_TL3()_YELLOW
+ */
+union nixx_af_tl4x_yellow {
+ u64 u;
+ struct nixx_af_tl4x_yellow_s {
+ u64 tail : 9;
+ u64 reserved_9 : 1;
+ u64 head : 9;
+ u64 reserved_19_63 : 45;
+ } s;
+ /* struct nixx_af_tl4x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_YELLOW(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_YELLOW(u64 a)
+{
+ return 0x12a0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4_const
+ *
+ * NIX AF Transmit Level 4 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl4_const {
+ u64 u;
+ struct nixx_af_tl4_const_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct nixx_af_tl4_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4_CONST(void)
+{
+ return 0x88;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_expr_credit
+ *
+ * INTERNAL: NIX AF Transmit Link Express Credit Registers Internal:
+ * 802.3br frame preemption/express path is defeatured. Old definition:
+ * These registers track credits per link for express packets that may
+ * potentially preempt normal packets. Link index enumerated by
+ * NIX_LINK_E.
+ */
+union nixx_af_tx_linkx_expr_credit {
+ u64 u;
+ struct nixx_af_tx_linkx_expr_credit_s {
+ u64 reserved_0 : 1;
+ u64 cc_enable : 1;
+ u64 cc_packet_cnt : 10;
+ u64 cc_unit_cnt : 20;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct nixx_af_tx_linkx_expr_credit_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_EXPR_CREDIT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_EXPR_CREDIT(u64 a)
+{
+ return 0xa10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_hw_xoff
+ *
+ * NIX AF Transmit Link Hardware Controlled XOFF Registers Link index
+ * enumerated by NIX_LINK_E.
+ */
+union nixx_af_tx_linkx_hw_xoff {
+ u64 u;
+ struct nixx_af_tx_linkx_hw_xoff_s {
+ u64 chan_xoff : 64;
+ } s;
+ /* struct nixx_af_tx_linkx_hw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_HW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_HW_XOFF(u64 a)
+{
+ return 0xa30 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_norm_credit
+ *
+ * NIX AF Transmit Link Normal Credit Registers These registers track
+ * credits per link for normal packets sent to CGX and LBK. Link index
+ * enumerated by NIX_LINK_E.
+ */
+union nixx_af_tx_linkx_norm_credit {
+ u64 u;
+ struct nixx_af_tx_linkx_norm_credit_s {
+ u64 reserved_0 : 1;
+ u64 cc_enable : 1;
+ u64 cc_packet_cnt : 10;
+ u64 cc_unit_cnt : 20;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct nixx_af_tx_linkx_norm_credit_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_NORM_CREDIT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_NORM_CREDIT(u64 a)
+{
+ return 0xa00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_sw_xoff
+ *
+ * INTERNAL: NIX AF Transmit Link Software Controlled XOFF Registers
+ * Link index enumerated by NIX_LINK_E. Internal: Defeatured registers.
+ * Software should instead use NIX_AF_TL3()_SW_XOFF registers when
+ * NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] is set and NIX_AF_TL2()_SW_XOFF
+ * registers when NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] is clear.
+ */
+union nixx_af_tx_linkx_sw_xoff {
+ u64 u;
+ struct nixx_af_tx_linkx_sw_xoff_s {
+ u64 chan_xoff : 64;
+ } s;
+ /* struct nixx_af_tx_linkx_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_SW_XOFF(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_SW_XOFF(u64 a)
+{
+ return 0xa20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_mcast#
+ *
+ * NIX AF Transmit Multicast Registers These registers access transmit
+ * multicast table entries used to specify multicast replication lists.
+ * Each list consists of linked entries with [EOL] = 1 in the last entry.
+ * A transmit packet is multicast when the action returned by NPC has
+ * NIX_TX_ACTION_S[OP] = NIX_TX_ACTIONOP_E::MCAST. NIX_TX_ACTION_S[INDEX]
+ * points to the start of the multicast replication list, and [EOL] = 1
+ * indicates the end of list.
+ */
+union nixx_af_tx_mcastx {
+ u64 u;
+ struct nixx_af_tx_mcastx_s {
+ u64 channel : 12;
+ u64 eol : 1;
+ u64 reserved_13_15 : 3;
+ u64 next : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct nixx_af_tx_mcastx_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_MCASTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_MCASTX(u64 a)
+{
+ return 0x1900 + 0x8000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_npc_capture_config
+ *
+ * NIX AF Transmit NPC Response Capture Configuration Register Configures
+ * the NPC response capture logic for transmit packets. When enabled,
+ * allows NPC responses for selected packets to be captured in
+ * NIX_AF_TX_NPC_CAPTURE_INFO and NIX_AF_TX_NPC_CAPTURE_RESP().
+ */
+union nixx_af_tx_npc_capture_config {
+ u64 u;
+ struct nixx_af_tx_npc_capture_config_s {
+ u64 en : 1;
+ u64 continuous : 1;
+ u64 lso_segnum_en : 1;
+ u64 sqe_id_en : 1;
+ u64 sq_id_en : 1;
+ u64 lf_id_en : 1;
+ u64 reserved_6_11 : 6;
+ u64 lso_segnum : 8;
+ u64 sqe_id : 16;
+ u64 sq_id : 20;
+ u64 lf_id : 8;
+ } s;
+ /* struct nixx_af_tx_npc_capture_config_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_CONFIG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_CONFIG(void)
+{
+ return 0x660;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_npc_capture_info
+ *
+ * NIX AF Transmit NPC Response Capture Information Register This
+ * register contains captured NPC response information for a transmit
+ * packet. See NIX_AF_TX_NPC_CAPTURE_CONFIG.
+ */
+union nixx_af_tx_npc_capture_info {
+ u64 u;
+ struct nixx_af_tx_npc_capture_info_s {
+ u64 vld : 1;
+ u64 reserved_1_11 : 11;
+ u64 lso_segnum : 8;
+ u64 sqe_id : 16;
+ u64 sq_id : 20;
+ u64 lf_id : 8;
+ } s;
+ /* struct nixx_af_tx_npc_capture_info_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_INFO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_INFO(void)
+{
+ return 0x668;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_npc_capture_resp#
+ *
+ * NIX AF Transmit NPC Capture Response Registers These registers contain
+ * the captured NPC response for a transmit packet when
+ * NIX_AF_TX_NPC_CAPTURE_INFO[VLD] is set. See also
+ * NIX_AF_TX_NPC_CAPTURE_CONFIG.
+ */
+union nixx_af_tx_npc_capture_respx {
+ u64 u;
+ struct nixx_af_tx_npc_capture_respx_s {
+ u64 data : 64;
+ } s;
+ /* struct nixx_af_tx_npc_capture_respx_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_RESPX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_RESPX(u64 a)
+{
+ return 0x680 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_tstmp_cfg
+ *
+ * NIX AF Transmit Timestamp Configuration Register
+ */
+union nixx_af_tx_tstmp_cfg {
+ u64 u;
+ struct nixx_af_tx_tstmp_cfg_s {
+ u64 tstmp_wd_period : 4;
+ u64 reserved_4_7 : 4;
+ u64 express : 16;
+ u64 reserved_24_63 : 40;
+ } s;
+ /* struct nixx_af_tx_tstmp_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_TSTMP_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_TSTMP_CFG(void)
+{
+ return 0xc0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_vtag_def#_ctl
+ *
+ * NIX AF Transmit Vtag Definition Control Registers The transmit Vtag
+ * definition table specifies Vtag layers (e.g. VLAN, E-TAG) to
+ * optionally insert or replace in the TX packet header. Indexed by
+ * NIX_TX_VTAG_ACTION_S[VTAG*_DEF].
+ */
+union nixx_af_tx_vtag_defx_ctl {
+ u64 u;
+ struct nixx_af_tx_vtag_defx_ctl_s {
+ u64 size : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_af_tx_vtag_defx_ctl_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_VTAG_DEFX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_VTAG_DEFX_CTL(u64 a)
+{
+ return 0x1a00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_vtag_def#_data
+ *
+ * NIX AF Transmit Vtag Definition Data Registers See
+ * NIX_AF_TX_VTAG_DEF()_CTL.
+ */
+union nixx_af_tx_vtag_defx_data {
+ u64 u;
+ struct nixx_af_tx_vtag_defx_data_s {
+ u64 data : 64;
+ } s;
+ /* struct nixx_af_tx_vtag_defx_data_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_VTAG_DEFX_DATA(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_VTAG_DEFX_DATA(u64 a)
+{
+ return 0x1a10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cfg
+ *
+ * NIX LF Configuration Register
+ */
+union nixx_lf_cfg {
+ u64 u;
+ struct nixx_lf_cfg_s {
+ u64 tcp_timer_int_ena : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_cfg_s cn; */
+};
+
+static inline u64 NIXX_LF_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CFG(void)
+{
+ return 0x100;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_cnt
+ *
+ * NIX LF Completion Interrupt Count Registers
+ */
+union nixx_lf_cintx_cnt {
+ u64 u;
+ struct nixx_lf_cintx_cnt_s {
+ u64 ecount : 32;
+ u64 qcount : 16;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_lf_cintx_cnt_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_CNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_CNT(u64 a)
+{
+ return 0xd00 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_ena_w1c
+ *
+ * NIX LF Completion Interrupt Enable Clear Registers This register
+ * clears interrupt enable bits.
+ */
+union nixx_lf_cintx_ena_w1c {
+ u64 u;
+ struct nixx_lf_cintx_ena_w1c_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_cintx_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_ENA_W1C(u64 a)
+{
+ return 0xd50 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_ena_w1s
+ *
+ * NIX LF Completion Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_cintx_ena_w1s {
+ u64 u;
+ struct nixx_lf_cintx_ena_w1s_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_cintx_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_ENA_W1S(u64 a)
+{
+ return 0xd40 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_int
+ *
+ * NIX LF Completion Interrupt Registers
+ */
+union nixx_lf_cintx_int {
+ u64 u;
+ struct nixx_lf_cintx_int_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_cintx_int_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_INT(u64 a)
+{
+ return 0xd20 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_int_w1s
+ *
+ * NIX LF Completion Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union nixx_lf_cintx_int_w1s {
+ u64 u;
+ struct nixx_lf_cintx_int_w1s_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_cintx_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_INT_W1S(u64 a)
+{
+ return 0xd30 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_wait
+ *
+ * NIX LF Completion Interrupt Count Registers
+ */
+union nixx_lf_cintx_wait {
+ u64 u;
+ struct nixx_lf_cintx_wait_s {
+ u64 ecount_wait : 32;
+ u64 qcount_wait : 16;
+ u64 time_wait : 8;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct nixx_lf_cintx_wait_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_WAIT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_WAIT(u64 a)
+{
+ return 0xd10 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cq_op_door
+ *
+ * NIX LF CQ Doorbell Operation Register A write to this register
+ * dequeues CQEs from a CQ ring within the LF. A read is RAZ. RSL
+ * accesses to this register are RAZ/WI.
+ */
+union nixx_lf_cq_op_door {
+ u64 u;
+ struct nixx_lf_cq_op_door_s {
+ u64 count : 16;
+ u64 reserved_16_31 : 16;
+ u64 cq : 20;
+ u64 reserved_52_63 : 12;
+ } s;
+ /* struct nixx_lf_cq_op_door_s cn; */
+};
+
+static inline u64 NIXX_LF_CQ_OP_DOOR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CQ_OP_DOOR(void)
+{
+ return 0xb30;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cq_op_int
+ *
+ * NIX LF Completion Queue Interrupt Operation Register A 64-bit atomic
+ * load-and-add to this register reads CQ interrupts and interrupt
+ * enables. A write optionally sets or clears interrupts and interrupt
+ * enables. A read is RAZ. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_cq_op_int {
+ u64 u;
+ struct nixx_lf_cq_op_int_s {
+ u64 cq_err_int : 8;
+ u64 cq_err_int_ena : 8;
+ u64 reserved_16_41 : 26;
+ u64 op_err : 1;
+ u64 setop : 1;
+ u64 cq : 20;
+ } s;
+ /* struct nixx_lf_cq_op_int_s cn; */
+};
+
+static inline u64 NIXX_LF_CQ_OP_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CQ_OP_INT(void)
+{
+ return 0xb00;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cq_op_status
+ *
+ * NIX LF Completion Queue Status Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_CQ_CTX_S[HEAD,TAIL]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the CQ
+ * within LF. All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_cq_op_status {
+ u64 u;
+ struct nixx_lf_cq_op_status_s {
+ u64 tail : 20;
+ u64 head : 20;
+ u64 reserved_40_45 : 6;
+ u64 cq_err : 1;
+ u64 reserved_47_62 : 16;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_cq_op_status_s cn; */
+};
+
+static inline u64 NIXX_LF_CQ_OP_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CQ_OP_STATUS(void)
+{
+ return 0xb40;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int
+ *
+ * NIX LF Error Interrupt Register
+ */
+union nixx_lf_err_int {
+ u64 u;
+ struct nixx_lf_err_int_s {
+ u64 sqb_fault : 1;
+ u64 sq_ctx_fault : 1;
+ u64 rq_ctx_fault : 1;
+ u64 cq_ctx_fault : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_fault : 1;
+ u64 ipsec_dyno_fault : 1;
+ u64 sq_disabled : 1;
+ u64 sq_oor : 1;
+ u64 send_jump_fault : 1;
+ u64 send_sg_fault : 1;
+ u64 rq_disabled : 1;
+ u64 rq_oor : 1;
+ u64 rx_wqe_fault : 1;
+ u64 rss_err : 1;
+ u64 reserved_15_19 : 5;
+ u64 dyno_err : 1;
+ u64 reserved_21_23 : 3;
+ u64 cq_disabled : 1;
+ u64 cq_oor : 1;
+ u64 reserved_26_27 : 2;
+ u64 qint_fault : 1;
+ u64 cint_fault : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct nixx_lf_err_int_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT(void)
+{
+ return 0x220;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int_ena_w1c
+ *
+ * NIX LF Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_err_int_ena_w1c {
+ u64 u;
+ struct nixx_lf_err_int_ena_w1c_s {
+ u64 sqb_fault : 1;
+ u64 sq_ctx_fault : 1;
+ u64 rq_ctx_fault : 1;
+ u64 cq_ctx_fault : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_fault : 1;
+ u64 ipsec_dyno_fault : 1;
+ u64 sq_disabled : 1;
+ u64 sq_oor : 1;
+ u64 send_jump_fault : 1;
+ u64 send_sg_fault : 1;
+ u64 rq_disabled : 1;
+ u64 rq_oor : 1;
+ u64 rx_wqe_fault : 1;
+ u64 rss_err : 1;
+ u64 reserved_15_19 : 5;
+ u64 dyno_err : 1;
+ u64 reserved_21_23 : 3;
+ u64 cq_disabled : 1;
+ u64 cq_oor : 1;
+ u64 reserved_26_27 : 2;
+ u64 qint_fault : 1;
+ u64 cint_fault : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct nixx_lf_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT_ENA_W1C(void)
+{
+ return 0x230;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int_ena_w1s
+ *
+ * NIX LF Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_err_int_ena_w1s {
+ u64 u;
+ struct nixx_lf_err_int_ena_w1s_s {
+ u64 sqb_fault : 1;
+ u64 sq_ctx_fault : 1;
+ u64 rq_ctx_fault : 1;
+ u64 cq_ctx_fault : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_fault : 1;
+ u64 ipsec_dyno_fault : 1;
+ u64 sq_disabled : 1;
+ u64 sq_oor : 1;
+ u64 send_jump_fault : 1;
+ u64 send_sg_fault : 1;
+ u64 rq_disabled : 1;
+ u64 rq_oor : 1;
+ u64 rx_wqe_fault : 1;
+ u64 rss_err : 1;
+ u64 reserved_15_19 : 5;
+ u64 dyno_err : 1;
+ u64 reserved_21_23 : 3;
+ u64 cq_disabled : 1;
+ u64 cq_oor : 1;
+ u64 reserved_26_27 : 2;
+ u64 qint_fault : 1;
+ u64 cint_fault : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct nixx_lf_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT_ENA_W1S(void)
+{
+ return 0x238;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int_w1s
+ *
+ * NIX LF Error Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_lf_err_int_w1s {
+ u64 u;
+ struct nixx_lf_err_int_w1s_s {
+ u64 sqb_fault : 1;
+ u64 sq_ctx_fault : 1;
+ u64 rq_ctx_fault : 1;
+ u64 cq_ctx_fault : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_fault : 1;
+ u64 ipsec_dyno_fault : 1;
+ u64 sq_disabled : 1;
+ u64 sq_oor : 1;
+ u64 send_jump_fault : 1;
+ u64 send_sg_fault : 1;
+ u64 rq_disabled : 1;
+ u64 rq_oor : 1;
+ u64 rx_wqe_fault : 1;
+ u64 rss_err : 1;
+ u64 reserved_15_19 : 5;
+ u64 dyno_err : 1;
+ u64 reserved_21_23 : 3;
+ u64 cq_disabled : 1;
+ u64 cq_oor : 1;
+ u64 reserved_26_27 : 2;
+ u64 qint_fault : 1;
+ u64 cint_fault : 1;
+ u64 reserved_30_63 : 34;
+ } s;
+ /* struct nixx_lf_err_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT_W1S(void)
+{
+ return 0x228;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint
+ *
+ * NIX LF General Interrupt Register
+ */
+union nixx_lf_gint {
+ u64 u;
+ struct nixx_lf_gint_s {
+ u64 drop : 1;
+ u64 tcp_timer : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct nixx_lf_gint_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT(void)
+{
+ return 0x200;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint_ena_w1c
+ *
+ * NIX LF General Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_gint_ena_w1c {
+ u64 u;
+ struct nixx_lf_gint_ena_w1c_s {
+ u64 drop : 1;
+ u64 tcp_timer : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct nixx_lf_gint_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT_ENA_W1C(void)
+{
+ return 0x210;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint_ena_w1s
+ *
+ * NIX LF General Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_gint_ena_w1s {
+ u64 u;
+ struct nixx_lf_gint_ena_w1s_s {
+ u64 drop : 1;
+ u64 tcp_timer : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct nixx_lf_gint_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT_ENA_W1S(void)
+{
+ return 0x218;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint_w1s
+ *
+ * NIX LF General Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union nixx_lf_gint_w1s {
+ u64 u;
+ struct nixx_lf_gint_w1s_s {
+ u64 drop : 1;
+ u64 tcp_timer : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct nixx_lf_gint_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT_W1S(void)
+{
+ return 0x208;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_mnq_err_dbg
+ *
+ * NIX LF Meta-descriptor Enqueue Error Debug Register This register
+ * captures debug info for an error detected during send meta-descriptor
+ * enqueue from an SQ to an SMQ. Hardware sets [VALID] when the debug
+ * info is captured, and subsequent errors are not captured until
+ * software clears [VALID] by writing a one to it.
+ */
+union nixx_lf_mnq_err_dbg {
+ u64 u;
+ struct nixx_lf_mnq_err_dbg_s {
+ u64 errcode : 8;
+ u64 sq : 20;
+ u64 sqe_id : 16;
+ u64 valid : 1;
+ u64 reserved_45_63 : 19;
+ } s;
+ /* struct nixx_lf_mnq_err_dbg_s cn; */
+};
+
+static inline u64 NIXX_LF_MNQ_ERR_DBG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_MNQ_ERR_DBG(void)
+{
+ return 0x270;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_op_ipsec_dyno_cnt
+ *
+ * INTERNAL: NIX LF IPSEC Dynamic Ordering Counter Operation Register
+ * Internal: Not used; no IPSEC fast-path. All accesses are RAZ/WI.
+ */
+union nixx_lf_op_ipsec_dyno_cnt {
+ u64 u;
+ struct nixx_lf_op_ipsec_dyno_cnt_s {
+ u64 count : 32;
+ u64 reserved_32_46 : 15;
+ u64 storeop : 1;
+ u64 dyno_sel : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_op_ipsec_dyno_cnt_s cn; */
+};
+
+static inline u64 NIXX_LF_OP_IPSEC_DYNO_CNT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_OP_IPSEC_DYNO_CNT(void)
+{
+ return 0x980;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_op_send#
+ *
+ * NIX LF Send Operation Registers An LMTST (or large store from CPT) to
+ * this address enqueues one or more SQEs to a send queue.
+ * NIX_SEND_HDR_S[SQ] in the first SQE selects the send queue.The maximum
+ * size of each SQE is specified by NIX_SQ_CTX_S[MAX_SQE_SIZE]. A read
+ * to this address is RAZ. An RSL access to this address will fault.
+ * The endianness of the instruction write data is controlled by
+ * NIX_AF_LF()_CFG[BE]. When a NIX_SEND_JUMP_S is not present in the
+ * SQE, the SQE consists of the entire send descriptor. When a
+ * NIX_SEND_JUMP_S is present in the SQE, the SQE must contain exactly
+ * the portion of the send descriptor up to and including the
+ * NIX_SEND_JUMP_S, and the remainder of the send descriptor must be at
+ * LF IOVA NIX_SEND_JUMP_S[ADDR] in LLC/DRAM. Software must ensure that
+ * all LLC/DRAM locations that will be referenced by NIX while processing
+ * this descriptor, including all packet data and post-jump
+ * subdescriptors contain the latest updates before issuing the LMTST. A
+ * DMB instruction may be required prior to the LMTST to ensure this. A
+ * DMB following the LMTST may be useful if SQ descriptor ordering
+ * matters and more than one CPU core is simultaneously enqueueing to the
+ * same SQ.
+ */
+union nixx_lf_op_sendx {
+ u64 u;
+ struct nixx_lf_op_sendx_s {
+ u64 data : 64;
+ } s;
+ /* struct nixx_lf_op_sendx_s cn; */
+};
+
+static inline u64 NIXX_LF_OP_SENDX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_OP_SENDX(u64 a)
+{
+ return 0x800 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_cnt
+ *
+ * NIX LF Queue Interrupt Count Registers
+ */
+union nixx_lf_qintx_cnt {
+ u64 u;
+ struct nixx_lf_qintx_cnt_s {
+ u64 count : 22;
+ u64 reserved_22_63 : 42;
+ } s;
+ /* struct nixx_lf_qintx_cnt_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_CNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_CNT(u64 a)
+{
+ return 0xc00 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_ena_w1c
+ *
+ * NIX LF Queue Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_qintx_ena_w1c {
+ u64 u;
+ struct nixx_lf_qintx_ena_w1c_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_qintx_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_ENA_W1C(u64 a)
+{
+ return 0xc30 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_ena_w1s
+ *
+ * NIX LF Queue Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_qintx_ena_w1s {
+ u64 u;
+ struct nixx_lf_qintx_ena_w1s_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_qintx_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_ENA_W1S(u64 a)
+{
+ return 0xc20 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_int
+ *
+ * NIX LF Queue Interrupt Registers
+ */
+union nixx_lf_qintx_int {
+ u64 u;
+ struct nixx_lf_qintx_int_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_qintx_int_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_INT(u64 a)
+{
+ return 0xc10 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_int_w1s
+ *
+ * INTERNAL: NIX LF Queue Interrupt Set Registers
+ */
+union nixx_lf_qintx_int_w1s {
+ u64 u;
+ struct nixx_lf_qintx_int_w1s_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct nixx_lf_qintx_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_INT_W1S(u64 a)
+{
+ return 0xc18 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras
+ *
+ * NIX LF RAS Interrupt Register
+ */
+union nixx_lf_ras {
+ u64 u;
+ struct nixx_lf_ras_s {
+ u64 sqb_poison : 1;
+ u64 sq_ctx_poison : 1;
+ u64 rq_ctx_poison : 1;
+ u64 cq_ctx_poison : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_poison : 1;
+ u64 ipsec_dyno_poison : 1;
+ u64 send_jump_poison : 1;
+ u64 send_sg_poison : 1;
+ u64 qint_poison : 1;
+ u64 cint_poison : 1;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_lf_ras_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS(void)
+{
+ return 0x240;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras_ena_w1c
+ *
+ * NIX LF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_ras_ena_w1c {
+ u64 u;
+ struct nixx_lf_ras_ena_w1c_s {
+ u64 sqb_poison : 1;
+ u64 sq_ctx_poison : 1;
+ u64 rq_ctx_poison : 1;
+ u64 cq_ctx_poison : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_poison : 1;
+ u64 ipsec_dyno_poison : 1;
+ u64 send_jump_poison : 1;
+ u64 send_sg_poison : 1;
+ u64 qint_poison : 1;
+ u64 cint_poison : 1;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_lf_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS_ENA_W1C(void)
+{
+ return 0x250;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras_ena_w1s
+ *
+ * NIX LF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union nixx_lf_ras_ena_w1s {
+ u64 u;
+ struct nixx_lf_ras_ena_w1s_s {
+ u64 sqb_poison : 1;
+ u64 sq_ctx_poison : 1;
+ u64 rq_ctx_poison : 1;
+ u64 cq_ctx_poison : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_poison : 1;
+ u64 ipsec_dyno_poison : 1;
+ u64 send_jump_poison : 1;
+ u64 send_sg_poison : 1;
+ u64 qint_poison : 1;
+ u64 cint_poison : 1;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_lf_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS_ENA_W1S(void)
+{
+ return 0x258;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras_w1s
+ *
+ * NIX LF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_lf_ras_w1s {
+ u64 u;
+ struct nixx_lf_ras_w1s_s {
+ u64 sqb_poison : 1;
+ u64 sq_ctx_poison : 1;
+ u64 rq_ctx_poison : 1;
+ u64 cq_ctx_poison : 1;
+ u64 reserved_4 : 1;
+ u64 rsse_poison : 1;
+ u64 ipsec_dyno_poison : 1;
+ u64 send_jump_poison : 1;
+ u64 send_sg_poison : 1;
+ u64 qint_poison : 1;
+ u64 cint_poison : 1;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct nixx_lf_ras_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS_W1S(void)
+{
+ return 0x248;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_drop_octs
+ *
+ * NIX LF Receive Queue Dropped Octets Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_RQ_CTX_S[DROP_OCTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the RQ
+ * within LF. All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_drop_octs {
+ u64 u;
+ struct nixx_lf_rq_op_drop_octs_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_rq_op_drop_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_DROP_OCTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_DROP_OCTS(void)
+{
+ return 0x930;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_drop_pkts
+ *
+ * NIX LF Receive Queue Dropped Packets Operation Register A 64-bit
+ * atomic load-and-add to this register reads NIX_RQ_CTX_S[DROP_PKTS].
+ * The atomic write data has format NIX_OP_Q_WDATA_S and selects the RQ
+ * within LF. All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_drop_pkts {
+ u64 u;
+ struct nixx_lf_rq_op_drop_pkts_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_rq_op_drop_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_DROP_PKTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_DROP_PKTS(void)
+{
+ return 0x940;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_int
+ *
+ * NIX LF Receive Queue Interrupt Operation Register A 64-bit atomic
+ * load-and-add to this register reads RQ interrupts and interrupt
+ * enables. A 64-bit write optionally sets or clears interrupts and
+ * interrupt enables. All other accesses to this register (e.g. reads,
+ * 128-bit accesses) are RAZ/WI. RSL accesses to this register are
+ * RAZ/WI.
+ */
+union nixx_lf_rq_op_int {
+ u64 u;
+ struct nixx_lf_rq_op_int_s {
+ u64 rq_int : 8;
+ u64 rq_int_ena : 8;
+ u64 reserved_16_41 : 26;
+ u64 op_err : 1;
+ u64 setop : 1;
+ u64 rq : 20;
+ } s;
+ /* struct nixx_lf_rq_op_int_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_INT(void)
+{
+ return 0x900;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_octs
+ *
+ * NIX LF Receive Queue Octets Operation Register A 64-bit atomic load-
+ * and-add to this register reads NIX_RQ_CTX_S[OCTS]. The atomic write
+ * data has format NIX_OP_Q_WDATA_S and selects the RQ within LF. All
+ * other accesses to this register (e.g. reads and writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_octs {
+ u64 u;
+ struct nixx_lf_rq_op_octs_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_rq_op_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_OCTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_OCTS(void)
+{
+ return 0x910;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_pkts
+ *
+ * NIX LF Receive Queue Packets Operation Register A 64-bit atomic load-
+ * and-add to this register reads NIX_RQ_CTX_S[PKTS]. The atomic write
+ * data has format NIX_OP_Q_WDATA_S and selects the RQ within LF. All
+ * other accesses to this register (e.g. reads and writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_pkts {
+ u64 u;
+ struct nixx_lf_rq_op_pkts_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_rq_op_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_PKTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_PKTS(void)
+{
+ return 0x920;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_re_pkts
+ *
+ * NIX LF Receive Queue Errored Packets Operation Register A 64-bit
+ * atomic load-and-add to this register reads NIX_RQ_CTX_S[RE_PKTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the RQ
+ * within LF. All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_re_pkts {
+ u64 u;
+ struct nixx_lf_rq_op_re_pkts_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_rq_op_re_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_RE_PKTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_RE_PKTS(void)
+{
+ return 0x950;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rx_secret#
+ *
+ * NIX LF Receive Secret Key Registers
+ */
+union nixx_lf_rx_secretx {
+ u64 u;
+ struct nixx_lf_rx_secretx_s {
+ u64 key : 64;
+ } s;
+ /* struct nixx_lf_rx_secretx_s cn; */
+};
+
+static inline u64 NIXX_LF_RX_SECRETX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RX_SECRETX(u64 a)
+{
+ return 0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rx_stat#
+ *
+ * NIX LF Receive Statistics Registers The last dimension indicates which
+ * statistic, and is enumerated by NIX_STAT_LF_RX_E.
+ */
+union nixx_lf_rx_statx {
+ u64 u;
+ struct nixx_lf_rx_statx_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_lf_rx_statx_s cn; */
+};
+
+static inline u64 NIXX_LF_RX_STATX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RX_STATX(u64 a)
+{
+ return 0x400 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_send_err_dbg
+ *
+ * NIX LF Send Error Debug Register This register captures debug info an
+ * error detected on packet send after a meta-descriptor is granted by
+ * PSE. Hardware sets [VALID] when the debug info is captured, and
+ * subsequent errors are not captured until software clears [VALID] by
+ * writing a one to it.
+ */
+union nixx_lf_send_err_dbg {
+ u64 u;
+ struct nixx_lf_send_err_dbg_s {
+ u64 errcode : 8;
+ u64 sq : 20;
+ u64 sqe_id : 16;
+ u64 valid : 1;
+ u64 reserved_45_63 : 19;
+ } s;
+ /* struct nixx_lf_send_err_dbg_s cn; */
+};
+
+static inline u64 NIXX_LF_SEND_ERR_DBG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SEND_ERR_DBG(void)
+{
+ return 0x280;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_drop_octs
+ *
+ * NIX LF Send Queue Dropped Octets Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_SQ_CTX_S[DROP_OCTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the SQ
+ * within LF. All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_drop_octs {
+ u64 u;
+ struct nixx_lf_sq_op_drop_octs_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_sq_op_drop_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_DROP_OCTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_DROP_OCTS(void)
+{
+ return 0xa40;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_drop_pkts
+ *
+ * NIX LF Send Queue Dropped Packets Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_SQ_CTX_S[DROP_PKTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the SQ
+ * within LF. All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_drop_pkts {
+ u64 u;
+ struct nixx_lf_sq_op_drop_pkts_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_sq_op_drop_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_DROP_PKTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_DROP_PKTS(void)
+{
+ return 0xa50;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_err_dbg
+ *
+ * NIX LF SQ Operation Error Debug Register This register captures debug
+ * info for an error detected on LMT store to NIX_LF_OP_SEND() or when a
+ * NIX_LF_SQ_OP_* register is accessed. Hardware sets [VALID] when the
+ * debug info is captured, and subsequent errors are not captured until
+ * software clears [VALID] by writing a one to it.
+ */
+union nixx_lf_sq_op_err_dbg {
+ u64 u;
+ struct nixx_lf_sq_op_err_dbg_s {
+ u64 errcode : 8;
+ u64 sq : 20;
+ u64 sqe_id : 16;
+ u64 valid : 1;
+ u64 reserved_45_63 : 19;
+ } s;
+ /* struct nixx_lf_sq_op_err_dbg_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_ERR_DBG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_ERR_DBG(void)
+{
+ return 0x260;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_int
+ *
+ * NIX LF Send Queue Interrupt Operation Register A 64-bit atomic load-
+ * and-add to this register reads SQ interrupts, interrupt enables and
+ * XOFF status. A write optionally sets or clears interrupts, interrupt
+ * enables and XOFF status. A read is RAZ. RSL accesses to this register
+ * are RAZ/WI.
+ */
+union nixx_lf_sq_op_int {
+ u64 u;
+ struct nixx_lf_sq_op_int_s {
+ u64 sq_int : 8;
+ u64 sq_int_ena : 8;
+ u64 xoff : 1;
+ u64 reserved_17_41 : 25;
+ u64 op_err : 1;
+ u64 setop : 1;
+ u64 sq : 20;
+ } s;
+ /* struct nixx_lf_sq_op_int_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_INT(void)
+{
+ return 0xa00;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_octs
+ *
+ * NIX LF Send Queue Octets Operation Register A 64-bit atomic load-and-
+ * add to this register reads NIX_SQ_CTX_S[OCTS]. The atomic write data
+ * has format NIX_OP_Q_WDATA_S and selects the SQ within LF. All other
+ * accesses to this register (e.g. reads and writes) are RAZ/WI. RSL
+ * accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_octs {
+ u64 u;
+ struct nixx_lf_sq_op_octs_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_sq_op_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_OCTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_OCTS(void)
+{
+ return 0xa10;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_pkts
+ *
+ * NIX LF Send Queue Packets Operation Register A 64-bit atomic load-and-
+ * add to this register reads NIX_SQ_CTX_S[PKTS]. The atomic write data
+ * has format NIX_OP_Q_WDATA_S and selects the SQ within LF. All other
+ * accesses to this register (e.g. reads and writes) are RAZ/WI. RSL
+ * accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_pkts {
+ u64 u;
+ struct nixx_lf_sq_op_pkts_s {
+ u64 cnt : 48;
+ u64 reserved_48_62 : 15;
+ u64 op_err : 1;
+ } s;
+ /* struct nixx_lf_sq_op_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_PKTS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_PKTS(void)
+{
+ return 0xa20;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_status
+ *
+ * NIX LF Send Queue Status Operation Register A 64-bit atomic load-and-
+ * add to this register reads status fields in NIX_SQ_CTX_S. The atomic
+ * write data has format NIX_OP_Q_WDATA_S and selects the SQ within LF.
+ * Completion of the load-and-add operation also ensures that all
+ * previously issued LMT stores to NIX_LF_OP_SEND() have completed. All
+ * other accesses to this register (e.g. reads and writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_status {
+ u64 u;
+ struct nixx_lf_sq_op_status_s {
+ u64 sqb_count : 16;
+ u64 reserved_16_19 : 4;
+ u64 head_offset : 6;
+ u64 reserved_26_27 : 2;
+ u64 tail_offset : 6;
+ u64 reserved_34_62 : 29;
+ u64 op_err : 1;
+ } s;
+ struct nixx_lf_sq_op_status_cn {
+ u64 sqb_count : 16;
+ u64 reserved_16_19 : 4;
+ u64 head_offset : 6;
+ u64 reserved_26_27 : 2;
+ u64 tail_offset : 6;
+ u64 reserved_34_35 : 2;
+ u64 reserved_36_62 : 27;
+ u64 op_err : 1;
+ } cn;
+};
+
+static inline u64 NIXX_LF_SQ_OP_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_STATUS(void)
+{
+ return 0xa30;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_tx_stat#
+ *
+ * NIX LF Transmit Statistics Registers The last dimension indicates
+ * which statistic, and is enumerated by NIX_STAT_LF_TX_E.
+ */
+union nixx_lf_tx_statx {
+ u64 u;
+ struct nixx_lf_tx_statx_s {
+ u64 stat : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct nixx_lf_tx_statx_s cn; */
+};
+
+static inline u64 NIXX_LF_TX_STATX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_TX_STATX(u64 a)
+{
+ return 0x300 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_priv_af_int_cfg
+ *
+ * NIX Privileged Admin Function Interrupt Configuration Register
+ */
+union nixx_priv_af_int_cfg {
+ u64 u;
+ struct nixx_priv_af_int_cfg_s {
+ u64 msix_offset : 11;
+ u64 reserved_11 : 1;
+ u64 msix_size : 8;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct nixx_priv_af_int_cfg_s cn; */
+};
+
+static inline u64 NIXX_PRIV_AF_INT_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_PRIV_AF_INT_CFG(void)
+{
+ return 0x8000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_priv_lf#_cfg
+ *
+ * NIX Privileged Local Function Configuration Registers These registers
+ * allow each NIX local function (LF) to be provisioned to a VF/PF for
+ * RVU. See also NIX_AF_RVU_LF_CFG_DEBUG. Software should read this
+ * register after write to ensure that the LF is mapped to [PF_FUNC]
+ * before issuing transactions to the mapped PF and function. [SLOT]
+ * must be zero. Internal: Hardware ignores [SLOT] and always assumes
+ * 0x0.
+ */
+union nixx_priv_lfx_cfg {
+ u64 u;
+ struct nixx_priv_lfx_cfg_s {
+ u64 slot : 8;
+ u64 pf_func : 16;
+ u64 reserved_24_62 : 39;
+ u64 ena : 1;
+ } s;
+ /* struct nixx_priv_lfx_cfg_s cn; */
+};
+
+static inline u64 NIXX_PRIV_LFX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_PRIV_LFX_CFG(u64 a)
+{
+ return 0x8000010 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_priv_lf#_int_cfg
+ *
+ * NIX Privileged LF Interrupt Configuration Registers
+ */
+union nixx_priv_lfx_int_cfg {
+ u64 u;
+ struct nixx_priv_lfx_int_cfg_s {
+ u64 msix_offset : 11;
+ u64 reserved_11 : 1;
+ u64 msix_size : 8;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct nixx_priv_lfx_int_cfg_s cn; */
+};
+
+static inline u64 NIXX_PRIV_LFX_INT_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NIXX_PRIV_LFX_INT_CFG(u64 a)
+{
+ return 0x8000020 + 0x100 * a;
+}
+
+#endif /* __CSRS_NIX_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_NPA_H__
+#define __CSRS_NPA_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * NPA.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration npa_af_int_vec_e
+ *
+ * NPA Admin Function Interrupt Vector Enumeration Enumerates the NPA AF
+ * MSI-X interrupt vectors.
+ */
+#define NPA_AF_INT_VEC_E_AF_ERR (3)
+#define NPA_AF_INT_VEC_E_AQ_DONE (2)
+#define NPA_AF_INT_VEC_E_GEN (1)
+#define NPA_AF_INT_VEC_E_POISON (4)
+#define NPA_AF_INT_VEC_E_RVU (0)
+
+/**
+ * Enumeration npa_aq_comp_e
+ *
+ * NPA Admin Queue Completion Enumeration Enumerates the values of
+ * NPA_AQ_RES_S[COMPCODE].
+ */
+#define NPA_AQ_COMP_E_CTX_FAULT (4)
+#define NPA_AQ_COMP_E_CTX_POISON (3)
+#define NPA_AQ_COMP_E_GOOD (1)
+#define NPA_AQ_COMP_E_LOCKERR (5)
+#define NPA_AQ_COMP_E_NOTDONE (0)
+#define NPA_AQ_COMP_E_SWERR (2)
+
+/**
+ * Enumeration npa_aq_ctype_e
+ *
+ * NPA Admin Queue Context Type Enumeration Enumerates
+ * NPA_AQ_INST_S[CTYPE] values.
+ */
+#define NPA_AQ_CTYPE_E_AURA (0)
+#define NPA_AQ_CTYPE_E_POOL (1)
+
+/**
+ * Enumeration npa_aq_instop_e
+ *
+ * NPA Admin Queue Opcode Enumeration Enumerates NPA_AQ_INST_S[OP]
+ * values.
+ */
+#define NPA_AQ_INSTOP_E_INIT (1)
+#define NPA_AQ_INSTOP_E_LOCK (4)
+#define NPA_AQ_INSTOP_E_NOP (0)
+#define NPA_AQ_INSTOP_E_READ (3)
+#define NPA_AQ_INSTOP_E_UNLOCK (5)
+#define NPA_AQ_INSTOP_E_WRITE (2)
+
+/**
+ * Enumeration npa_aura_err_int_e
+ *
+ * NPA Aura Error Interrupt Enumeration Enumerates the bit index of
+ * NPA_AURA_S[ERR_INT], and NPA_AURA_S[ERR_INT_ENA].
+ */
+#define NPA_AURA_ERR_INT_E_AURA_ADD_OVER (1)
+#define NPA_AURA_ERR_INT_E_AURA_ADD_UNDER (2)
+#define NPA_AURA_ERR_INT_E_AURA_FREE_UNDER (0)
+#define NPA_AURA_ERR_INT_E_POOL_DIS (3)
+#define NPA_AURA_ERR_INT_E_RX(a) (0 + (a))
+
+/**
+ * Enumeration npa_bpintf_e
+ *
+ * NPA Backpressure Interface Enumeration Enumerates index of
+ * NPA_AURA_S[BP_ENA].
+ */
+#define NPA_BPINTF_E_NIXX_RX(a) (0 + (a))
+
+/**
+ * Enumeration npa_inpq_e
+ *
+ * NPA Input Queue Enumeration Enumerates ALLOC/FREE input queues from
+ * coprocessors.
+ */
+#define NPA_INPQ_E_AURA_OP (0xe)
+#define NPA_INPQ_E_BPHY (7)
+#define NPA_INPQ_E_DPI (6)
+#define NPA_INPQ_E_INTERNAL_RSV (0xf)
+#define NPA_INPQ_E_NIXX_RX(a) (0 + 2 * (a))
+#define NPA_INPQ_E_NIXX_TX(a) (1 + 2 * (a))
+#define NPA_INPQ_E_RX(a) (0 + (a))
+#define NPA_INPQ_E_SSO (4)
+#define NPA_INPQ_E_TIM (5)
+
+/**
+ * Enumeration npa_lf_int_vec_e
+ *
+ * NPA Local Function Interrupt Vector Enumeration Enumerates the NPA
+ * MSI-X interrupt vectors per LF.
+ */
+#define NPA_LF_INT_VEC_E_ERR_INT (0x40)
+#define NPA_LF_INT_VEC_E_POISON (0x41)
+#define NPA_LF_INT_VEC_E_QINTX(a) (0 + (a))
+
+/**
+ * Enumeration npa_ndc0_port_e
+ *
+ * NPA NDC0 Port Enumeration Enumerates NPA NDC0 (NDC_IDX_E::NPA_U(0))
+ * ports and the PORT index of NDC_AF_PORT()_RT()_RW()_REQ_PC and
+ * NDC_AF_PORT()_RT()_RW()_LAT_PC.
+ */
+#define NPA_NDC0_PORT_E_AURA0 (0)
+#define NPA_NDC0_PORT_E_AURA1 (1)
+#define NPA_NDC0_PORT_E_POOL0 (2)
+#define NPA_NDC0_PORT_E_POOL1 (3)
+#define NPA_NDC0_PORT_E_STACK0 (4)
+#define NPA_NDC0_PORT_E_STACK1 (5)
+
+/**
+ * Enumeration npa_pool_err_int_e
+ *
+ * NPA Pool Error Interrupt Enumeration Enumerates the bit index of
+ * NPA_POOL_S[ERR_INT] and NPA_POOL_S[ERR_INT_ENA].
+ */
+#define NPA_POOL_ERR_INT_E_OVFLS (0)
+#define NPA_POOL_ERR_INT_E_PERR (2)
+#define NPA_POOL_ERR_INT_E_RX(a) (0 + (a))
+#define NPA_POOL_ERR_INT_E_RANGE (1)
+
+/**
+ * Structure npa_aq_inst_s
+ *
+ * NPA Admin Queue Instruction Structure This structure specifies the AQ
+ * instruction. Instructions and associated software structures are
+ * stored in memory as little-endian unless NPA_AF_GEN_CFG[AF_BE] is set.
+ * Hardware reads of NPA_AQ_INST_S do not allocate into LLC. Hardware
+ * reads and writes of the context structure selected by [CTYPE], [LF]
+ * and [CINDEX] use the NDC and LLC caching style configured for that
+ * context, i.e.: * NPA_AURA_HW_S reads and writes use
+ * NPA_AF_LF()_AURAS_CFG[CACHING] and NPA_AF_LF()_AURAS_CFG[WAY_MASK]. *
+ * NPA_POOL_HW_S reads and writes use NPA_AURA_HW_S[POOL_CACHING] and
+ * NPA_AURA_HW_S[POOL_WAY_MASK].
+ */
+union npa_aq_inst_s {
+ u64 u[2];
+ struct npa_aq_inst_s_s {
+ u64 op : 4;
+ u64 ctype : 4;
+ u64 lf : 9;
+ u64 reserved_17_23 : 7;
+ u64 cindex : 20;
+ u64 reserved_44_62 : 19;
+ u64 doneint : 1;
+ u64 res_addr : 64;
+ } s;
+ /* struct npa_aq_inst_s_s cn; */
+};
+
+/**
+ * Structure npa_aq_res_s
+ *
+ * NPA Admin Queue Result Structure NPA writes this structure after it
+ * completes the NPA_AQ_INST_S instruction. The result structure is
+ * exactly 16 bytes, and each instruction completion produces exactly one
+ * result structure. Results and associated software structures are
+ * stored in memory as little-endian unless NPA_AF_GEN_CFG[AF_BE] is set.
+ * When [OP] = NPA_AQ_INSTOP_E::INIT, WRITE or READ, this structure is
+ * immediately followed by context read or write data. See
+ * NPA_AQ_INSTOP_E. Hardware writes of NPA_AQ_RES_S and context data
+ * always allocate into LLC. Hardware reads of context data do not
+ * allocate into LLC.
+ */
+union npa_aq_res_s {
+ u64 u[2];
+ struct npa_aq_res_s_s {
+ u64 op : 4;
+ u64 ctype : 4;
+ u64 compcode : 8;
+ u64 doneint : 1;
+ u64 reserved_17_63 : 47;
+ u64 reserved_64_127 : 64;
+ } s;
+ /* struct npa_aq_res_s_s cn; */
+};
+
+/**
+ * Structure npa_aura_op_wdata_s
+ *
+ * NPA Aura Operation Write Data Structure This structure specifies the
+ * write data format of a 64-bit atomic load-and-add to
+ * NPA_LF_AURA_OP_ALLOC() and NPA_LF_POOL_OP_PC, and a 128-bit atomic
+ * CASP operation to NPA_LF_AURA_OP_ALLOC().
+ */
+union npa_aura_op_wdata_s {
+ u64 u;
+ struct npa_aura_op_wdata_s_s {
+ u64 aura : 20;
+ u64 reserved_20_62 : 43;
+ u64 drop : 1;
+ } s;
+ /* struct npa_aura_op_wdata_s_s cn; */
+};
+
+/**
+ * Structure npa_aura_s
+ *
+ * NPA Aura Context Structure This structure specifies the format used by
+ * software with the NPA admin queue to read and write an aura's
+ * NPA_AURA_HW_S structure maintained by hardware in LLC/DRAM.
+ */
+union npa_aura_s {
+ u64 u[8];
+ struct npa_aura_s_s {
+ u64 pool_addr : 64;
+ u64 ena : 1;
+ u64 reserved_65_66 : 2;
+ u64 pool_caching : 1;
+ u64 pool_way_mask : 16;
+ u64 avg_con : 9;
+ u64 reserved_93 : 1;
+ u64 pool_drop_ena : 1;
+ u64 aura_drop_ena : 1;
+ u64 bp_ena : 2;
+ u64 reserved_98_103 : 6;
+ u64 aura_drop : 8;
+ u64 shift : 6;
+ u64 reserved_118_119 : 2;
+ u64 avg_level : 8;
+ u64 count : 36;
+ u64 reserved_164_167 : 4;
+ u64 nix0_bpid : 9;
+ u64 reserved_177_179 : 3;
+ u64 nix1_bpid : 9;
+ u64 reserved_189_191 : 3;
+ u64 limit : 36;
+ u64 reserved_228_231 : 4;
+ u64 bp : 8;
+ u64 reserved_240_243 : 4;
+ u64 fc_ena : 1;
+ u64 fc_up_crossing : 1;
+ u64 fc_stype : 2;
+ u64 fc_hyst_bits : 4;
+ u64 reserved_252_255 : 4;
+ u64 fc_addr : 64;
+ u64 pool_drop : 8;
+ u64 update_time : 16;
+ u64 err_int : 8;
+ u64 err_int_ena : 8;
+ u64 thresh_int : 1;
+ u64 thresh_int_ena : 1;
+ u64 thresh_up : 1;
+ u64 reserved_363 : 1;
+ u64 thresh_qint_idx : 7;
+ u64 reserved_371 : 1;
+ u64 err_qint_idx : 7;
+ u64 reserved_379_383 : 5;
+ u64 thresh : 36;
+ u64 reserved_420_447 : 28;
+ u64 reserved_448_511 : 64;
+ } s;
+ /* struct npa_aura_s_s cn; */
+};
+
+/**
+ * Structure npa_pool_s
+ *
+ * NPA Pool Context Structure This structure specifies the format used by
+ * software with the NPA admin queue to read and write a pool's
+ * NPA_POOL_HW_S structure maintained by hardware in LLC/DRAM.
+ */
+union npa_pool_s {
+ u64 u[16];
+ struct npa_pool_s_s {
+ u64 stack_base : 64;
+ u64 ena : 1;
+ u64 nat_align : 1;
+ u64 reserved_66_67 : 2;
+ u64 stack_caching : 1;
+ u64 reserved_69_71 : 3;
+ u64 stack_way_mask : 16;
+ u64 buf_offset : 12;
+ u64 reserved_100_103 : 4;
+ u64 buf_size : 11;
+ u64 reserved_115_127 : 13;
+ u64 stack_max_pages : 32;
+ u64 stack_pages : 32;
+ u64 op_pc : 48;
+ u64 reserved_240_255 : 16;
+ u64 stack_offset : 4;
+ u64 reserved_260_263 : 4;
+ u64 shift : 6;
+ u64 reserved_270_271 : 2;
+ u64 avg_level : 8;
+ u64 avg_con : 9;
+ u64 fc_ena : 1;
+ u64 fc_stype : 2;
+ u64 fc_hyst_bits : 4;
+ u64 fc_up_crossing : 1;
+ u64 reserved_297_299 : 3;
+ u64 update_time : 16;
+ u64 reserved_316_319 : 4;
+ u64 fc_addr : 64;
+ u64 ptr_start : 64;
+ u64 ptr_end : 64;
+ u64 reserved_512_535 : 24;
+ u64 err_int : 8;
+ u64 err_int_ena : 8;
+ u64 thresh_int : 1;
+ u64 thresh_int_ena : 1;
+ u64 thresh_up : 1;
+ u64 reserved_555 : 1;
+ u64 thresh_qint_idx : 7;
+ u64 reserved_563 : 1;
+ u64 err_qint_idx : 7;
+ u64 reserved_571_575 : 5;
+ u64 thresh : 36;
+ u64 reserved_612_639 : 28;
+ u64 reserved_640_703 : 64;
+ u64 reserved_704_767 : 64;
+ u64 reserved_768_831 : 64;
+ u64 reserved_832_895 : 64;
+ u64 reserved_896_959 : 64;
+ u64 reserved_960_1023 : 64;
+ } s;
+ /* struct npa_pool_s_s cn; */
+};
+
+/**
+ * Structure npa_qint_hw_s
+ *
+ * NPA Queue Interrupt Context Hardware Structure This structure contains
+ * context state maintained by hardware for each queue interrupt (QINT)
+ * in NDC/LLC/DRAM. Software accesses this structure with the
+ * NPA_LF_QINT()_* registers. Hardware maintains a table of
+ * NPA_AF_CONST[QINTS] contiguous NPA_QINT_HW_S structures per LF
+ * starting at IOVA NPA_AF_LF()_QINTS_BASE. Always stored in byte
+ * invariant little-endian format (LE8).
+ */
+union npa_qint_hw_s {
+ u32 u;
+ struct npa_qint_hw_s_s {
+ u32 count : 22;
+ u32 reserved_22_30 : 9;
+ u32 ena : 1;
+ } s;
+ /* struct npa_qint_hw_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_active_cycles_pc
+ *
+ * NPA AF Active Cycles Register
+ */
+union npa_af_active_cycles_pc {
+ u64 u;
+ struct npa_af_active_cycles_pc_s {
+ u64 act_cyc : 64;
+ } s;
+ /* struct npa_af_active_cycles_pc_s cn; */
+};
+
+static inline u64 NPA_AF_ACTIVE_CYCLES_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ACTIVE_CYCLES_PC(void)
+{
+ return 0xf0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_base
+ *
+ * NPA AF Admin Queue Base Address Register
+ */
+union npa_af_aq_base {
+ u64 u;
+ struct npa_af_aq_base_s {
+ u64 reserved_0_6 : 7;
+ u64 base_addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct npa_af_aq_base_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_BASE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_BASE(void)
+{
+ return 0x610;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_cfg
+ *
+ * NPA AF Admin Queue Configuration Register
+ */
+union npa_af_aq_cfg {
+ u64 u;
+ struct npa_af_aq_cfg_s {
+ u64 qsize : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npa_af_aq_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_CFG(void)
+{
+ return 0x600;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done
+ *
+ * NPA AF AQ Done Count Register
+ */
+union npa_af_aq_done {
+ u64 u;
+ struct npa_af_aq_done_s {
+ u64 done : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npa_af_aq_done_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE(void)
+{
+ return 0x650;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_ack
+ *
+ * NPA AF AQ Done Count Ack Register This register is written by software
+ * to acknowledge interrupts.
+ */
+union npa_af_aq_done_ack {
+ u64 u;
+ struct npa_af_aq_done_ack_s {
+ u64 done_ack : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npa_af_aq_done_ack_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_ACK(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_ACK(void)
+{
+ return 0x660;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_ena_w1c
+ *
+ * NPA AF AQ Done Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_aq_done_ena_w1c {
+ u64 u;
+ struct npa_af_aq_done_ena_w1c_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_aq_done_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_ENA_W1C(void)
+{
+ return 0x698;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_ena_w1s
+ *
+ * NPA AF AQ Done Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union npa_af_aq_done_ena_w1s {
+ u64 u;
+ struct npa_af_aq_done_ena_w1s_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_aq_done_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_ENA_W1S(void)
+{
+ return 0x690;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_int
+ *
+ * NPA AF AQ Done Interrupt Register
+ */
+union npa_af_aq_done_int {
+ u64 u;
+ struct npa_af_aq_done_int_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_aq_done_int_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_INT(void)
+{
+ return 0x680;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_int_w1s
+ *
+ * INTERNAL: NPA AF AQ Done Interrupt Set Register
+ */
+union npa_af_aq_done_int_w1s {
+ u64 u;
+ struct npa_af_aq_done_int_w1s_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_aq_done_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_INT_W1S(void)
+{
+ return 0x688;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_timer
+ *
+ * NPA AF Admin Queue Done Interrupt Timer Register Used to debug the
+ * queue interrupt coalescing timer.
+ */
+union npa_af_aq_done_timer {
+ u64 u;
+ struct npa_af_aq_done_timer_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_af_aq_done_timer_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_TIMER(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_TIMER(void)
+{
+ return 0x670;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_wait
+ *
+ * NPA AF AQ Done Interrupt Coalescing Wait Register Specifies the queue
+ * interrupt coalescing settings.
+ */
+union npa_af_aq_done_wait {
+ u64 u;
+ struct npa_af_aq_done_wait_s {
+ u64 num_wait : 20;
+ u64 reserved_20_31 : 12;
+ u64 time_wait : 16;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct npa_af_aq_done_wait_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_WAIT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_WAIT(void)
+{
+ return 0x640;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_door
+ *
+ * NPA AF Admin Queue Doorbell Register Software writes to this register
+ * to enqueue one or more entries to AQ.
+ */
+union npa_af_aq_door {
+ u64 u;
+ struct npa_af_aq_door_s {
+ u64 count : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_af_aq_door_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DOOR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DOOR(void)
+{
+ return 0x630;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_status
+ *
+ * NPA AF Admin Queue Status Register
+ */
+union npa_af_aq_status {
+ u64 u;
+ struct npa_af_aq_status_s {
+ u64 reserved_0_3 : 4;
+ u64 head_ptr : 20;
+ u64 reserved_24_35 : 12;
+ u64 tail_ptr : 20;
+ u64 reserved_56_61 : 6;
+ u64 aq_busy : 1;
+ u64 aq_err : 1;
+ } s;
+ struct npa_af_aq_status_cn {
+ u64 reserved_0_3 : 4;
+ u64 head_ptr : 20;
+ u64 reserved_24_31 : 8;
+ u64 reserved_32_35 : 4;
+ u64 tail_ptr : 20;
+ u64 reserved_56_61 : 6;
+ u64 aq_busy : 1;
+ u64 aq_err : 1;
+ } cn;
+};
+
+static inline u64 NPA_AF_AQ_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_STATUS(void)
+{
+ return 0x620;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_avg_delay
+ *
+ * NPA AF Queue Average Delay Register
+ */
+union npa_af_avg_delay {
+ u64 u;
+ struct npa_af_avg_delay_s {
+ u64 avg_dly : 19;
+ u64 reserved_19_23 : 5;
+ u64 avg_timer : 16;
+ u64 reserved_40_62 : 23;
+ u64 avg_timer_dis : 1;
+ } s;
+ /* struct npa_af_avg_delay_s cn; */
+};
+
+static inline u64 NPA_AF_AVG_DELAY(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AVG_DELAY(void)
+{
+ return 0x100;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_bar2_alias#
+ *
+ * INTERNAL: NPA Admin Function BAR2 Alias Registers These registers
+ * alias to the NPA BAR2 registers for the PF and function selected by
+ * NPA_AF_BAR2_SEL[PF_FUNC]. Internal: Not implemented. Placeholder for
+ * bug33464.
+ */
+union npa_af_bar2_aliasx {
+ u64 u;
+ struct npa_af_bar2_aliasx_s {
+ u64 data : 64;
+ } s;
+ /* struct npa_af_bar2_aliasx_s cn; */
+};
+
+static inline u64 NPA_AF_BAR2_ALIASX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BAR2_ALIASX(u64 a)
+{
+ return 0x9100000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_bar2_sel
+ *
+ * INTERNAL: NPA Admin Function BAR2 Select Register This register
+ * configures BAR2 accesses from the NPA_AF_BAR2_ALIAS() registers in
+ * BAR0. Internal: Not implemented. Placeholder for bug33464.
+ */
+union npa_af_bar2_sel {
+ u64 u;
+ struct npa_af_bar2_sel_s {
+ u64 alias_pf_func : 16;
+ u64 alias_ena : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct npa_af_bar2_sel_s cn; */
+};
+
+static inline u64 NPA_AF_BAR2_SEL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BAR2_SEL(void)
+{
+ return 0x9000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_blk_rst
+ *
+ * NPA AF Block Reset Register
+ */
+union npa_af_blk_rst {
+ u64 u;
+ struct npa_af_blk_rst_s {
+ u64 rst : 1;
+ u64 reserved_1_62 : 62;
+ u64 busy : 1;
+ } s;
+ /* struct npa_af_blk_rst_s cn; */
+};
+
+static inline u64 NPA_AF_BLK_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BLK_RST(void)
+{
+ return 0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_bp_test
+ *
+ * INTERNAL: NPA AF Backpressure Test Register
+ */
+union npa_af_bp_test {
+ u64 u;
+ struct npa_af_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 32;
+ u64 enable : 16;
+ } s;
+ /* struct npa_af_bp_test_s cn; */
+};
+
+static inline u64 NPA_AF_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BP_TEST(void)
+{
+ return 0x200;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_const
+ *
+ * NPA AF Constants Register This register contains constants for
+ * software discovery.
+ */
+union npa_af_const {
+ u64 u;
+ struct npa_af_const_s {
+ u64 stack_page_bytes : 8;
+ u64 stack_page_ptrs : 8;
+ u64 lfs : 12;
+ u64 qints : 12;
+ u64 num_ndc : 3;
+ u64 reserved_43_63 : 21;
+ } s;
+ /* struct npa_af_const_s cn; */
+};
+
+static inline u64 NPA_AF_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_CONST(void)
+{
+ return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_const1
+ *
+ * NPA AF Constants Register 1 This register contains constants for
+ * software discovery.
+ */
+union npa_af_const1 {
+ u64 u;
+ struct npa_af_const1_s {
+ u64 aura_log2bytes : 4;
+ u64 pool_log2bytes : 4;
+ u64 qint_log2bytes : 4;
+ u64 reserved_12_63 : 52;
+ } s;
+ /* struct npa_af_const1_s cn; */
+};
+
+static inline u64 NPA_AF_CONST1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_CONST1(void)
+{
+ return 0x18;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_dtx_filter_ctl
+ *
+ * NPA AF DTX LF Filter Control Register
+ */
+union npa_af_dtx_filter_ctl {
+ u64 u;
+ struct npa_af_dtx_filter_ctl_s {
+ u64 ena : 1;
+ u64 reserved_1_3 : 3;
+ u64 lf : 7;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct npa_af_dtx_filter_ctl_s cn; */
+};
+
+static inline u64 NPA_AF_DTX_FILTER_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_DTX_FILTER_CTL(void)
+{
+ return 0x10040;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_eco
+ *
+ * INTERNAL: NPA AF ECO Register
+ */
+union npa_af_eco {
+ u64 u;
+ struct npa_af_eco_s {
+ u64 eco_rw : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct npa_af_eco_s cn; */
+};
+
+static inline u64 NPA_AF_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ECO(void)
+{
+ return 0x300;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int
+ *
+ * NPA Admin Function Error Interrupt Register
+ */
+union npa_af_err_int {
+ u64 u;
+ struct npa_af_err_int_s {
+ u64 reserved_0_11 : 12;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct npa_af_err_int_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT(void)
+{
+ return 0x180;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int_ena_w1c
+ *
+ * NPA Admin Function Error Interrupt Enable Clear Register This register
+ * clears interrupt enable bits.
+ */
+union npa_af_err_int_ena_w1c {
+ u64 u;
+ struct npa_af_err_int_ena_w1c_s {
+ u64 reserved_0_11 : 12;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct npa_af_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT_ENA_W1C(void)
+{
+ return 0x198;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int_ena_w1s
+ *
+ * NPA Admin Function Error Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union npa_af_err_int_ena_w1s {
+ u64 u;
+ struct npa_af_err_int_ena_w1s_s {
+ u64 reserved_0_11 : 12;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct npa_af_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT_ENA_W1S(void)
+{
+ return 0x190;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int_w1s
+ *
+ * NPA Admin Function Error Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union npa_af_err_int_w1s {
+ u64 u;
+ struct npa_af_err_int_w1s_s {
+ u64 reserved_0_11 : 12;
+ u64 aq_door_err : 1;
+ u64 aq_res_fault : 1;
+ u64 aq_inst_fault : 1;
+ u64 reserved_15_63 : 49;
+ } s;
+ /* struct npa_af_err_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT_W1S(void)
+{
+ return 0x188;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_cfg
+ *
+ * NPA AF General Configuration Register This register provides NPA
+ * control and status information.
+ */
+union npa_af_gen_cfg {
+ u64 u;
+ struct npa_af_gen_cfg_s {
+ u64 reserved_0 : 1;
+ u64 af_be : 1;
+ u64 reserved_2 : 1;
+ u64 force_cond_clk_en : 1;
+ u64 force_intf_clk_en : 1;
+ u64 reserved_5_9 : 5;
+ u64 ocla_bp : 1;
+ u64 reserved_11 : 1;
+ u64 ratem1 : 4;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_af_gen_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_CFG(void)
+{
+ return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int
+ *
+ * NPA AF General Interrupt Register This register contains general error
+ * interrupt summary bits.
+ */
+union npa_af_gen_int {
+ u64 u;
+ struct npa_af_gen_int_s {
+ u64 free_dis : 16;
+ u64 alloc_dis : 16;
+ u64 unmapped_pf_func : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct npa_af_gen_int_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT(void)
+{
+ return 0x140;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int_ena_w1c
+ *
+ * NPA AF General Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_gen_int_ena_w1c {
+ u64 u;
+ struct npa_af_gen_int_ena_w1c_s {
+ u64 free_dis : 16;
+ u64 alloc_dis : 16;
+ u64 unmapped_pf_func : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct npa_af_gen_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT_ENA_W1C(void)
+{
+ return 0x158;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int_ena_w1s
+ *
+ * NPA AF General Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union npa_af_gen_int_ena_w1s {
+ u64 u;
+ struct npa_af_gen_int_ena_w1s_s {
+ u64 free_dis : 16;
+ u64 alloc_dis : 16;
+ u64 unmapped_pf_func : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct npa_af_gen_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT_ENA_W1S(void)
+{
+ return 0x150;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int_w1s
+ *
+ * NPA AF General Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union npa_af_gen_int_w1s {
+ u64 u;
+ struct npa_af_gen_int_w1s_s {
+ u64 free_dis : 16;
+ u64 alloc_dis : 16;
+ u64 unmapped_pf_func : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct npa_af_gen_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT_W1S(void)
+{
+ return 0x148;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_inp_ctl
+ *
+ * NPA AF Input Control Register
+ */
+union npa_af_inp_ctl {
+ u64 u;
+ struct npa_af_inp_ctl_s {
+ u64 free_dis : 16;
+ u64 alloc_dis : 16;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct npa_af_inp_ctl_s cn; */
+};
+
+static inline u64 NPA_AF_INP_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_INP_CTL(void)
+{
+ return 0xd0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_auras_cfg
+ *
+ * NPA AF Local Function Auras Configuration Registers
+ */
+union npa_af_lfx_auras_cfg {
+ u64 u;
+ struct npa_af_lfx_auras_cfg_s {
+ u64 way_mask : 16;
+ u64 loc_aura_size : 4;
+ u64 loc_aura_offset : 14;
+ u64 caching : 1;
+ u64 be : 1;
+ u64 rmt_aura_size : 4;
+ u64 rmt_aura_offset : 14;
+ u64 rmt_lf : 7;
+ u64 reserved_61_63 : 3;
+ } s;
+ struct npa_af_lfx_auras_cfg_cn96xxp1 {
+ u64 way_mask : 16;
+ u64 loc_aura_size : 4;
+ u64 loc_aura_offset : 14;
+ u64 caching : 1;
+ u64 reserved_35 : 1;
+ u64 rmt_aura_size : 4;
+ u64 rmt_aura_offset : 14;
+ u64 rmt_lf : 7;
+ u64 reserved_61_63 : 3;
+ } cn96xxp1;
+ /* struct npa_af_lfx_auras_cfg_s cn96xxp3; */
+ /* struct npa_af_lfx_auras_cfg_s cnf95xx; */
+};
+
+static inline u64 NPA_AF_LFX_AURAS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_AURAS_CFG(u64 a)
+{
+ return 0x4000 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_loc_auras_base
+ *
+ * NPA AF Local Function Auras Base Registers
+ */
+union npa_af_lfx_loc_auras_base {
+ u64 u;
+ struct npa_af_lfx_loc_auras_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct npa_af_lfx_loc_auras_base_s cn; */
+};
+
+static inline u64 NPA_AF_LFX_LOC_AURAS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_LOC_AURAS_BASE(u64 a)
+{
+ return 0x4010 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_qints_base
+ *
+ * NPA AF Local Function Queue Interrupts Base Registers
+ */
+union npa_af_lfx_qints_base {
+ u64 u;
+ struct npa_af_lfx_qints_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct npa_af_lfx_qints_base_s cn; */
+};
+
+static inline u64 NPA_AF_LFX_QINTS_BASE(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_QINTS_BASE(u64 a)
+{
+ return 0x4110 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_qints_cfg
+ *
+ * NPA AF Local Function Queue Interrupts Configuration Registers This
+ * register controls access to the LF's queue interrupt context table in
+ * LLC/DRAM. The table consists of NPA_AF_CONST[QINTS] contiguous
+ * NPA_QINT_HW_S structures. The size of each structure is 1 \<\<
+ * NPA_AF_CONST1[QINT_LOG2BYTES] bytes.
+ */
+union npa_af_lfx_qints_cfg {
+ u64 u;
+ struct npa_af_lfx_qints_cfg_s {
+ u64 reserved_0_19 : 20;
+ u64 way_mask : 16;
+ u64 caching : 2;
+ u64 reserved_38_63 : 26;
+ } s;
+ /* struct npa_af_lfx_qints_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_LFX_QINTS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_QINTS_CFG(u64 a)
+{
+ return 0x4100 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf_rst
+ *
+ * NPA Admin Function LF Reset Register
+ */
+union npa_af_lf_rst {
+ u64 u;
+ struct npa_af_lf_rst_s {
+ u64 lf : 8;
+ u64 reserved_8_11 : 4;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct npa_af_lf_rst_s cn; */
+};
+
+static inline u64 NPA_AF_LF_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LF_RST(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ndc_cfg
+ *
+ * NDC AF General Configuration Register This register provides NDC
+ * control.
+ */
+union npa_af_ndc_cfg {
+ u64 u;
+ struct npa_af_ndc_cfg_s {
+ u64 ndc_bypass : 1;
+ u64 ndc_ign_pois : 1;
+ u64 byp_aura : 1;
+ u64 byp_pool : 1;
+ u64 byp_stack : 1;
+ u64 byp_qint : 1;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct npa_af_ndc_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_NDC_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_NDC_CFG(void)
+{
+ return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ndc_sync
+ *
+ * NPA AF NDC Sync Register Used to synchronize the NPA NDC.
+ */
+union npa_af_ndc_sync {
+ u64 u;
+ struct npa_af_ndc_sync_s {
+ u64 lf : 8;
+ u64 reserved_8_11 : 4;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct npa_af_ndc_sync_s cn; */
+};
+
+static inline u64 NPA_AF_NDC_SYNC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_NDC_SYNC(void)
+{
+ return 0x50;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras
+ *
+ * NPA AF RAS Interrupt Register This register is intended for delivery
+ * of RAS events to the SCP, so should be ignored by OS drivers.
+ */
+union npa_af_ras {
+ u64 u;
+ struct npa_af_ras_s {
+ u64 reserved_0_31 : 32;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct npa_af_ras_s cn; */
+};
+
+static inline u64 NPA_AF_RAS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS(void)
+{
+ return 0x1a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras_ena_w1c
+ *
+ * NPA AF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_ras_ena_w1c {
+ u64 u;
+ struct npa_af_ras_ena_w1c_s {
+ u64 reserved_0_31 : 32;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct npa_af_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_RAS_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS_ENA_W1C(void)
+{
+ return 0x1b8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras_ena_w1s
+ *
+ * NPA AF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union npa_af_ras_ena_w1s {
+ u64 u;
+ struct npa_af_ras_ena_w1s_s {
+ u64 reserved_0_31 : 32;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct npa_af_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RAS_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS_ENA_W1S(void)
+{
+ return 0x1b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras_w1s
+ *
+ * NPA AF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_af_ras_w1s {
+ u64 u;
+ struct npa_af_ras_w1s_s {
+ u64 reserved_0_31 : 32;
+ u64 aq_ctx_poison : 1;
+ u64 aq_res_poison : 1;
+ u64 aq_inst_poison : 1;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct npa_af_ras_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RAS_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS_W1S(void)
+{
+ return 0x1a8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int
+ *
+ * NPA AF RVU Interrupt Register This register contains RVU error
+ * interrupt summary bits.
+ */
+union npa_af_rvu_int {
+ u64 u;
+ struct npa_af_rvu_int_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_rvu_int_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT(void)
+{
+ return 0x160;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int_ena_w1c
+ *
+ * NPA AF RVU Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_rvu_int_ena_w1c {
+ u64 u;
+ struct npa_af_rvu_int_ena_w1c_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_rvu_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT_ENA_W1C(void)
+{
+ return 0x178;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int_ena_w1s
+ *
+ * NPA AF RVU Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union npa_af_rvu_int_ena_w1s {
+ u64 u;
+ struct npa_af_rvu_int_ena_w1s_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_rvu_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT_ENA_W1S(void)
+{
+ return 0x170;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int_w1s
+ *
+ * NPA AF RVU Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_af_rvu_int_w1s {
+ u64 u;
+ struct npa_af_rvu_int_w1s_s {
+ u64 unmapped_slot : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_af_rvu_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT_W1S(void)
+{
+ return 0x168;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_lf_cfg_debug
+ *
+ * NPA Privileged LF Configuration Debug Register This debug register
+ * allows software to lookup the reverse mapping from VF/PF slot to LF.
+ * The forward mapping is programmed with NPA_PRIV_LF()_CFG.
+ */
+union npa_af_rvu_lf_cfg_debug {
+ u64 u;
+ struct npa_af_rvu_lf_cfg_debug_s {
+ u64 lf : 12;
+ u64 lf_valid : 1;
+ u64 exec : 1;
+ u64 reserved_14_15 : 2;
+ u64 slot : 8;
+ u64 pf_func : 16;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct npa_af_rvu_lf_cfg_debug_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_LF_CFG_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_LF_CFG_DEBUG(void)
+{
+ return 0x10030;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_alloc#
+ *
+ * NPA Aura Allocate Operation Registers These registers are used to
+ * allocate one or two pointers from a given aura's pool. A 64-bit atomic
+ * load-and-add to NPA_LF_AURA_OP_ALLOC(0) allocates a single pointer. A
+ * 128-bit atomic CASP operation to NPA_LF_AURA_OP_ALLOC(0..1) allocates
+ * two pointers. The atomic write data format is NPA_AURA_OP_WDATA_S. For
+ * CASP, the first SWAP word in the write data contains
+ * NPA_AURA_OP_WDATA_S and the remaining write data words are ignored.
+ * All other accesses to this register (e.g. reads and writes) are
+ * RAZ/WI. RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_allocx {
+ u64 u;
+ struct npa_lf_aura_op_allocx_s {
+ u64 addr : 64;
+ } s;
+ /* struct npa_lf_aura_op_allocx_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_ALLOCX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_ALLOCX(u64 a)
+{
+ return 0x10 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_cnt
+ *
+ * NPA LF Aura Count Register A 64-bit atomic load-and-add to this
+ * register returns a given aura's count. A write sets or adds the aura's
+ * count. A read is RAZ. RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_cnt {
+ u64 u;
+ struct npa_lf_aura_op_cnt_s {
+ u64 count : 36;
+ u64 reserved_36_41 : 6;
+ u64 op_err : 1;
+ u64 cnt_add : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_aura_op_cnt_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_CNT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_CNT(void)
+{
+ return 0x30;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_free0
+ *
+ * NPA LF Aura Free Operation Register 0 A 128-bit write (STP) to
+ * NPA_LF_AURA_OP_FREE0 and NPA_LF_AURA_OP_FREE1 frees a pointer into a
+ * given aura's pool. All other accesses to these registers (e.g. reads
+ * and 64-bit writes) are RAZ/WI. RSL accesses to this register are
+ * RAZ/WI.
+ */
+union npa_lf_aura_op_free0 {
+ u64 u;
+ struct npa_lf_aura_op_free0_s {
+ u64 addr : 64;
+ } s;
+ /* struct npa_lf_aura_op_free0_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_FREE0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_FREE0(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_free1
+ *
+ * NPA LF Aura Free Operation Register 1 See NPA_LF_AURA_OP_FREE0. RSL
+ * accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_free1 {
+ u64 u;
+ struct npa_lf_aura_op_free1_s {
+ u64 aura : 20;
+ u64 reserved_20_62 : 43;
+ u64 fabs : 1;
+ } s;
+ /* struct npa_lf_aura_op_free1_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_FREE1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_FREE1(void)
+{
+ return 0x28;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_int
+ *
+ * NPA LF Aura Interrupt Operation Register A 64-bit atomic load-and-add
+ * to this register reads
+ * NPA_AURA_HW_S[ERR_INT,ERR_INT_ENA,THRESH_INT,THRESH_INT_ENA]. A write
+ * optionally sets or clears these fields. A read is RAZ. RSL accesses
+ * to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_int {
+ u64 u;
+ struct npa_lf_aura_op_int_s {
+ u64 err_int : 8;
+ u64 err_int_ena : 8;
+ u64 thresh_int : 1;
+ u64 thresh_int_ena : 1;
+ u64 reserved_18_41 : 24;
+ u64 op_err : 1;
+ u64 setop : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_aura_op_int_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_INT(void)
+{
+ return 0x60;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_limit
+ *
+ * NPA LF Aura Allocation Limit Register A 64-bit atomic load-and-add to
+ * this register returns a given aura's limit. A write sets the aura's
+ * limit. A read is RAZ. RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_limit {
+ u64 u;
+ struct npa_lf_aura_op_limit_s {
+ u64 limit : 36;
+ u64 reserved_36_41 : 6;
+ u64 op_err : 1;
+ u64 reserved_43 : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_aura_op_limit_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_LIMIT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_LIMIT(void)
+{
+ return 0x50;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_thresh
+ *
+ * NPA LF Aura Threshold Operation Register A 64-bit atomic load-and-add
+ * to this register reads NPA_AURA_HW_S[THRESH_UP,THRESH]. A write to the
+ * register writes NPA_AURA_HW_S[THRESH_UP,THRESH] and recomputes
+ * NPA_AURA_HW_S[THRESH_INT]. A read is RAZ. RSL accesses to this
+ * register are RAZ/WI.
+ */
+union npa_lf_aura_op_thresh {
+ u64 u;
+ struct npa_lf_aura_op_thresh_s {
+ u64 thresh : 36;
+ u64 reserved_36_41 : 6;
+ u64 op_err : 1;
+ u64 thresh_up : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_aura_op_thresh_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_THRESH(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_THRESH(void)
+{
+ return 0x70;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int
+ *
+ * NPA LF Error Interrupt Register
+ */
+union npa_lf_err_int {
+ u64 u;
+ struct npa_lf_err_int_s {
+ u64 aura_dis : 1;
+ u64 aura_oor : 1;
+ u64 reserved_2 : 1;
+ u64 rmt_req_oor : 1;
+ u64 reserved_4_11 : 8;
+ u64 aura_fault : 1;
+ u64 pool_fault : 1;
+ u64 stack_fault : 1;
+ u64 qint_fault : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_lf_err_int_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT(void)
+{
+ return 0x200;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int_ena_w1c
+ *
+ * NPA LF Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_lf_err_int_ena_w1c {
+ u64 u;
+ struct npa_lf_err_int_ena_w1c_s {
+ u64 aura_dis : 1;
+ u64 aura_oor : 1;
+ u64 reserved_2 : 1;
+ u64 rmt_req_oor : 1;
+ u64 reserved_4_11 : 8;
+ u64 aura_fault : 1;
+ u64 pool_fault : 1;
+ u64 stack_fault : 1;
+ u64 qint_fault : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_lf_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT_ENA_W1C(void)
+{
+ return 0x210;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int_ena_w1s
+ *
+ * NPA LF Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union npa_lf_err_int_ena_w1s {
+ u64 u;
+ struct npa_lf_err_int_ena_w1s_s {
+ u64 aura_dis : 1;
+ u64 aura_oor : 1;
+ u64 reserved_2 : 1;
+ u64 rmt_req_oor : 1;
+ u64 reserved_4_11 : 8;
+ u64 aura_fault : 1;
+ u64 pool_fault : 1;
+ u64 stack_fault : 1;
+ u64 qint_fault : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_lf_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT_ENA_W1S(void)
+{
+ return 0x218;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int_w1s
+ *
+ * NPA LF Error Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_lf_err_int_w1s {
+ u64 u;
+ struct npa_lf_err_int_w1s_s {
+ u64 aura_dis : 1;
+ u64 aura_oor : 1;
+ u64 reserved_2 : 1;
+ u64 rmt_req_oor : 1;
+ u64 reserved_4_11 : 8;
+ u64 aura_fault : 1;
+ u64 pool_fault : 1;
+ u64 stack_fault : 1;
+ u64 qint_fault : 1;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct npa_lf_err_int_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT_W1S(void)
+{
+ return 0x208;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_available
+ *
+ * NPA LF Pool Available Count Operation Register A 64-bit atomic load-
+ * and-add to this register returns a given pool's free pointer count.
+ * Reads and writes are RAZ/WI. RSL accesses to this register are
+ * RAZ/WI.
+ */
+union npa_lf_pool_op_available {
+ u64 u;
+ struct npa_lf_pool_op_available_s {
+ u64 count : 36;
+ u64 reserved_36_41 : 6;
+ u64 op_err : 1;
+ u64 reserved_43 : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_pool_op_available_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_AVAILABLE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_AVAILABLE(void)
+{
+ return 0x110;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_int
+ *
+ * NPA LF Pool Interrupt Operation Register A 64-bit atomic load-and-add
+ * to this register reads
+ * NPA_POOL_S[ERR_INT,ERR_INT_ENA,THRESH_INT,THRESH_INT_ENA]. A write
+ * optionally sets or clears these fields. A read is RAZ. RSL accesses
+ * to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_int {
+ u64 u;
+ struct npa_lf_pool_op_int_s {
+ u64 err_int : 8;
+ u64 err_int_ena : 8;
+ u64 thresh_int : 1;
+ u64 thresh_int_ena : 1;
+ u64 reserved_18_41 : 24;
+ u64 op_err : 1;
+ u64 setop : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_pool_op_int_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_INT(void)
+{
+ return 0x160;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_pc
+ *
+ * NPA LF Pool Performance Count Register A 64-bit atomic load-and-add to
+ * this register reads NPA_POOL_S[OP_PC] from a given aura's pool. The
+ * aura is selected by the atomic write data, whose format is
+ * NPA_AURA_OP_WDATA_S. Reads and writes are RAZ/WI. RSL accesses to
+ * this register are RAZ/WI.
+ */
+union npa_lf_pool_op_pc {
+ u64 u;
+ struct npa_lf_pool_op_pc_s {
+ u64 op_pc : 48;
+ u64 op_err : 1;
+ u64 reserved_49_63 : 15;
+ } s;
+ /* struct npa_lf_pool_op_pc_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PC(void)
+{
+ return 0x100;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_end0
+ *
+ * NPA LF Pool Pointer End Operation Register 0 A 128-bit write (STP) to
+ * the NPA_LF_POOL_OP_PTR_END0 and NPA_LF_POOL_OP_PTR_END1 registers
+ * writes to a given pool's pointer end value. All other accesses to
+ * these registers (e.g. reads and 64-bit writes) are RAZ/WI. RSL
+ * accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_end0 {
+ u64 u;
+ struct npa_lf_pool_op_ptr_end0_s {
+ u64 ptr_end : 64;
+ } s;
+ /* struct npa_lf_pool_op_ptr_end0_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_END0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_END0(void)
+{
+ return 0x130;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_end1
+ *
+ * NPA LF Pool Pointer End Operation Register 1 See
+ * NPA_LF_POOL_OP_PTR_END0. RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_end1 {
+ u64 u;
+ struct npa_lf_pool_op_ptr_end1_s {
+ u64 aura : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npa_lf_pool_op_ptr_end1_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_END1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_END1(void)
+{
+ return 0x138;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_start0
+ *
+ * NPA LF Pool Pointer Start Operation Register 0 A 128-bit write (STP)
+ * to the NPA_LF_POOL_OP_PTR_START0 and NPA_LF_POOL_OP_PTR_START1
+ * registers writes to a given pool's pointer start value. All other
+ * accesses to these registers (e.g. reads and 64-bit writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_start0 {
+ u64 u;
+ struct npa_lf_pool_op_ptr_start0_s {
+ u64 ptr_start : 64;
+ } s;
+ /* struct npa_lf_pool_op_ptr_start0_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_START0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_START0(void)
+{
+ return 0x120;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_start1
+ *
+ * NPA LF Pool Pointer Start Operation Register 1 See
+ * NPA_LF_POOL_OP_PTR_START0. RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_start1 {
+ u64 u;
+ struct npa_lf_pool_op_ptr_start1_s {
+ u64 aura : 20;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npa_lf_pool_op_ptr_start1_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_START1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_START1(void)
+{
+ return 0x128;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_thresh
+ *
+ * NPA LF Pool Threshold Operation Register A 64-bit atomic load-and-add
+ * to this register reads NPA_POOL_S[THRESH_UP,THRESH]. A write to the
+ * register writes NPA_POOL_S[THRESH_UP,THRESH]. A read is RAZ. RSL
+ * accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_thresh {
+ u64 u;
+ struct npa_lf_pool_op_thresh_s {
+ u64 thresh : 36;
+ u64 reserved_36_41 : 6;
+ u64 op_err : 1;
+ u64 thresh_up : 1;
+ u64 aura : 20;
+ } s;
+ /* struct npa_lf_pool_op_thresh_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_THRESH(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_THRESH(void)
+{
+ return 0x170;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_cnt
+ *
+ * NPA LF Queue Interrupt Count Registers
+ */
+union npa_lf_qintx_cnt {
+ u64 u;
+ struct npa_lf_qintx_cnt_s {
+ u64 count : 22;
+ u64 reserved_22_63 : 42;
+ } s;
+ /* struct npa_lf_qintx_cnt_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_CNT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_CNT(u64 a)
+{
+ return 0x300 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_ena_w1c
+ *
+ * NPA LF Queue Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union npa_lf_qintx_ena_w1c {
+ u64 u;
+ struct npa_lf_qintx_ena_w1c_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_lf_qintx_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_ENA_W1C(u64 a)
+{
+ return 0x330 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_ena_w1s
+ *
+ * NPA LF Queue Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union npa_lf_qintx_ena_w1s {
+ u64 u;
+ struct npa_lf_qintx_ena_w1s_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_lf_qintx_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_ENA_W1S(u64 a)
+{
+ return 0x320 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_int
+ *
+ * NPA LF Queue Interrupt Registers
+ */
+union npa_lf_qintx_int {
+ u64 u;
+ struct npa_lf_qintx_int_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_lf_qintx_int_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_INT(u64 a)
+{
+ return 0x310 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_int_w1s
+ *
+ * INTERNAL: NPA LF Queue Interrupt Set Registers
+ */
+union npa_lf_qintx_int_w1s {
+ u64 u;
+ struct npa_lf_qintx_int_w1s_s {
+ u64 intr : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npa_lf_qintx_int_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_INT_W1S(u64 a)
+{
+ return 0x318 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras
+ *
+ * NPA LF RAS Interrupt Register
+ */
+union npa_lf_ras {
+ u64 u;
+ struct npa_lf_ras_s {
+ u64 aura_poison : 1;
+ u64 pool_poison : 1;
+ u64 stack_poison : 1;
+ u64 qint_poison : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npa_lf_ras_s cn; */
+};
+
+static inline u64 NPA_LF_RAS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS(void)
+{
+ return 0x220;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras_ena_w1c
+ *
+ * NPA LF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_lf_ras_ena_w1c {
+ u64 u;
+ struct npa_lf_ras_ena_w1c_s {
+ u64 aura_poison : 1;
+ u64 pool_poison : 1;
+ u64 stack_poison : 1;
+ u64 qint_poison : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npa_lf_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_LF_RAS_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS_ENA_W1C(void)
+{
+ return 0x230;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras_ena_w1s
+ *
+ * NPA LF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union npa_lf_ras_ena_w1s {
+ u64 u;
+ struct npa_lf_ras_ena_w1s_s {
+ u64 aura_poison : 1;
+ u64 pool_poison : 1;
+ u64 stack_poison : 1;
+ u64 qint_poison : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npa_lf_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_RAS_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS_ENA_W1S(void)
+{
+ return 0x238;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras_w1s
+ *
+ * NPA LF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_lf_ras_w1s {
+ u64 u;
+ struct npa_lf_ras_w1s_s {
+ u64 aura_poison : 1;
+ u64 pool_poison : 1;
+ u64 stack_poison : 1;
+ u64 qint_poison : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npa_lf_ras_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_RAS_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS_W1S(void)
+{
+ return 0x228;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_priv_af_int_cfg
+ *
+ * NPA Privileged AF Interrupt Configuration Register
+ */
+union npa_priv_af_int_cfg {
+ u64 u;
+ struct npa_priv_af_int_cfg_s {
+ u64 msix_offset : 11;
+ u64 reserved_11 : 1;
+ u64 msix_size : 8;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npa_priv_af_int_cfg_s cn; */
+};
+
+static inline u64 NPA_PRIV_AF_INT_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_PRIV_AF_INT_CFG(void)
+{
+ return 0x10000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_priv_lf#_cfg
+ *
+ * NPA Privileged Local Function Configuration Registers These registers
+ * allow each NPA local function (LF) to be provisioned to a VF/PF slot
+ * for RVU. See also NPA_AF_RVU_LF_CFG_DEBUG. Software should read this
+ * register after write to ensure that the LF is mapped to [PF_FUNC]
+ * before issuing transactions to the mapped PF and function. [SLOT]
+ * must be zero. Internal: Hardware ignores [SLOT] and always assumes
+ * 0x0.
+ */
+union npa_priv_lfx_cfg {
+ u64 u;
+ struct npa_priv_lfx_cfg_s {
+ u64 slot : 8;
+ u64 pf_func : 16;
+ u64 reserved_24_62 : 39;
+ u64 ena : 1;
+ } s;
+ /* struct npa_priv_lfx_cfg_s cn; */
+};
+
+static inline u64 NPA_PRIV_LFX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_PRIV_LFX_CFG(u64 a)
+{
+ return 0x10010 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_priv_lf#_int_cfg
+ *
+ * NPA Privileged LF Interrupt Configuration Registers
+ */
+union npa_priv_lfx_int_cfg {
+ u64 u;
+ struct npa_priv_lfx_int_cfg_s {
+ u64 msix_offset : 11;
+ u64 reserved_11 : 1;
+ u64 msix_size : 8;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npa_priv_lfx_int_cfg_s cn; */
+};
+
+static inline u64 NPA_PRIV_LFX_INT_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPA_PRIV_LFX_INT_CFG(u64 a)
+{
+ return 0x10020 + 0x100 * a;
+}
+
+#endif /* __CSRS_NPA_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_NPC_H__
+#define __CSRS_NPC_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * NPC.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration npc_errlev_e
+ *
+ * NPC Error Level Enumeration Enumerates the lowest protocol layer
+ * containing an error.
+ */
+#define NPC_ERRLEV_E_LA (1)
+#define NPC_ERRLEV_E_LB (2)
+#define NPC_ERRLEV_E_LC (3)
+#define NPC_ERRLEV_E_LD (4)
+#define NPC_ERRLEV_E_LE (5)
+#define NPC_ERRLEV_E_LF (6)
+#define NPC_ERRLEV_E_LG (7)
+#define NPC_ERRLEV_E_LH (8)
+#define NPC_ERRLEV_E_NIX (0xf)
+#define NPC_ERRLEV_E_RX(a) (0 + (a))
+#define NPC_ERRLEV_E_RE (0)
+
+/**
+ * Enumeration npc_intf_e
+ *
+ * NPC Interface Enumeration Enumerates the NPC interfaces.
+ */
+#define NPC_INTF_E_NIXX_RX(a) (0 + 2 * (a))
+#define NPC_INTF_E_NIXX_TX(a) (1 + 2 * (a))
+
+/**
+ * Enumeration npc_lid_e
+ *
+ * NPC Layer ID Enumeration Enumerates layers parsed by NPC.
+ */
+#define NPC_LID_E_LA (0)
+#define NPC_LID_E_LB (1)
+#define NPC_LID_E_LC (2)
+#define NPC_LID_E_LD (3)
+#define NPC_LID_E_LE (4)
+#define NPC_LID_E_LF (5)
+#define NPC_LID_E_LG (6)
+#define NPC_LID_E_LH (7)
+
+/**
+ * Enumeration npc_lkupop_e
+ *
+ * NPC Lookup Operation Enumeration Enumerates the lookup operation for
+ * NPC_AF_LKUP_CTL[OP].
+ */
+#define NPC_LKUPOP_E_KEY (1)
+#define NPC_LKUPOP_E_PKT (0)
+
+/**
+ * Enumeration npc_mcamkeyw_e
+ *
+ * NPC MCAM Search Key Width Enumeration
+ */
+#define NPC_MCAMKEYW_E_X1 (0)
+#define NPC_MCAMKEYW_E_X2 (1)
+#define NPC_MCAMKEYW_E_X4 (2)
+
+/**
+ * Structure npc_layer_info_s
+ *
+ * NPC Layer Parse Information Structure This structure specifies the
+ * format of NPC_RESULT_S[LA,LB,...,LH].
+ */
+union npc_layer_info_s {
+ u32 u;
+ struct npc_layer_info_s_s {
+ u32 lptr : 8;
+ u32 flags : 8;
+ u32 ltype : 4;
+ u32 reserved_20_31 : 12;
+ } s;
+ /* struct npc_layer_info_s_s cn; */
+};
+
+/**
+ * Structure npc_layer_kex_s
+ *
+ * NPC Layer MCAM Search Key Extract Structure This structure specifies
+ * the format of each of the NPC_PARSE_KEX_S[LA,LB,...,LH] fields. It
+ * contains the subset of NPC_LAYER_INFO_S fields that can be included in
+ * the MCAM search key. See NPC_PARSE_KEX_S and NPC_AF_INTF()_KEX_CFG.
+ */
+union npc_layer_kex_s {
+ u32 u;
+ struct npc_layer_kex_s_s {
+ u32 flags : 8;
+ u32 ltype : 4;
+ u32 reserved_12_31 : 20;
+ } s;
+ /* struct npc_layer_kex_s_s cn; */
+};
+
+/**
+ * Structure npc_mcam_key_x1_s
+ *
+ * NPC MCAM Search Key X1 Structure This structure specifies the MCAM
+ * search key format used by an interface when
+ * NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X1.
+ */
+union npc_mcam_key_x1_s {
+ u64 u[3];
+ struct npc_mcam_key_x1_s_s {
+ u64 intf : 2;
+ u64 reserved_2_63 : 62;
+ u64 kw0 : 64;
+ u64 kw1 : 48;
+ u64 reserved_176_191 : 16;
+ } s;
+ /* struct npc_mcam_key_x1_s_s cn; */
+};
+
+/**
+ * Structure npc_mcam_key_x2_s
+ *
+ * NPC MCAM Search Key X2 Structure This structure specifies the MCAM
+ * search key format used by an interface when
+ * NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X2.
+ */
+union npc_mcam_key_x2_s {
+ u64 u[5];
+ struct npc_mcam_key_x2_s_s {
+ u64 intf : 2;
+ u64 reserved_2_63 : 62;
+ u64 kw0 : 64;
+ u64 kw1 : 64;
+ u64 kw2 : 64;
+ u64 kw3 : 32;
+ u64 reserved_288_319 : 32;
+ } s;
+ /* struct npc_mcam_key_x2_s_s cn; */
+};
+
+/**
+ * Structure npc_mcam_key_x4_s
+ *
+ * NPC MCAM Search Key X4 Structure This structure specifies the MCAM
+ * search key format used by an interface when
+ * NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X4.
+ */
+union npc_mcam_key_x4_s {
+ u64 u[8];
+ struct npc_mcam_key_x4_s_s {
+ u64 intf : 2;
+ u64 reserved_2_63 : 62;
+ u64 kw0 : 64;
+ u64 kw1 : 64;
+ u64 kw2 : 64;
+ u64 kw3 : 64;
+ u64 kw4 : 64;
+ u64 kw5 : 64;
+ u64 kw6 : 64;
+ } s;
+ /* struct npc_mcam_key_x4_s_s cn; */
+};
+
+/**
+ * Structure npc_parse_kex_s
+ *
+ * NPC Parse Key Extract Structure This structure contains the subset of
+ * NPC_RESULT_S fields that can be included in the MCAM search key. See
+ * NPC_AF_INTF()_KEX_CFG.
+ */
+union npc_parse_kex_s {
+ u64 u[2];
+ struct npc_parse_kex_s_s {
+ u64 chan : 12;
+ u64 errlev : 4;
+ u64 errcode : 8;
+ u64 l2m : 1;
+ u64 l2b : 1;
+ u64 l3m : 1;
+ u64 l3b : 1;
+ u64 la : 12;
+ u64 lb : 12;
+ u64 lc : 12;
+ u64 ld : 12;
+ u64 le : 12;
+ u64 lf : 12;
+ u64 lg : 12;
+ u64 lh : 12;
+ u64 reserved_124_127 : 4;
+ } s;
+ /* struct npc_parse_kex_s_s cn; */
+};
+
+/**
+ * Structure npc_result_s
+ *
+ * NPC Result Structure This structure contains a packet's parse and flow
+ * identification information.
+ */
+union npc_result_s {
+ u64 u[6];
+ struct npc_result_s_s {
+ u64 intf : 2;
+ u64 pkind : 6;
+ u64 chan : 12;
+ u64 errlev : 4;
+ u64 errcode : 8;
+ u64 l2m : 1;
+ u64 l2b : 1;
+ u64 l3m : 1;
+ u64 l3b : 1;
+ u64 eoh_ptr : 8;
+ u64 reserved_44_63 : 20;
+ u64 action : 64;
+ u64 vtag_action : 64;
+ u64 la : 20;
+ u64 lb : 20;
+ u64 lc : 20;
+ u64 reserved_252_255 : 4;
+ u64 ld : 20;
+ u64 le : 20;
+ u64 lf : 20;
+ u64 reserved_316_319 : 4;
+ u64 lg : 20;
+ u64 lh : 20;
+ u64 reserved_360_383 : 24;
+ } s;
+ /* struct npc_result_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_active_pc
+ *
+ * NPC Interrupt-Timer Configuration Register
+ */
+union npc_af_active_pc {
+ u64 u;
+ struct npc_af_active_pc_s {
+ u64 active_pc : 64;
+ } s;
+ /* struct npc_af_active_pc_s cn; */
+};
+
+static inline u64 NPC_AF_ACTIVE_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_ACTIVE_PC(void)
+{
+ return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_blk_rst
+ *
+ * NPC AF Block Reset Register
+ */
+union npc_af_blk_rst {
+ u64 u;
+ struct npc_af_blk_rst_s {
+ u64 rst : 1;
+ u64 reserved_1_62 : 62;
+ u64 busy : 1;
+ } s;
+ /* struct npc_af_blk_rst_s cn; */
+};
+
+static inline u64 NPC_AF_BLK_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_BLK_RST(void)
+{
+ return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_cfg
+ *
+ * NPC AF General Configuration Register
+ */
+union npc_af_cfg {
+ u64 u;
+ struct npc_af_cfg_s {
+ u64 reserved_0_1 : 2;
+ u64 cclk_force : 1;
+ u64 force_intf_clk_en : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npc_af_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CFG(void)
+{
+ return 0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_const
+ *
+ * NPC AF Constants Register This register contains constants for
+ * software discovery.
+ */
+union npc_af_const {
+ u64 u;
+ struct npc_af_const_s {
+ u64 intfs : 4;
+ u64 lids : 4;
+ u64 kpus : 5;
+ u64 reserved_13_15 : 3;
+ u64 mcam_bank_width : 10;
+ u64 reserved_26_27 : 2;
+ u64 mcam_bank_depth : 16;
+ u64 mcam_banks : 4;
+ u64 match_stats : 16;
+ } s;
+ /* struct npc_af_const_s cn; */
+};
+
+static inline u64 NPC_AF_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CONST(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_const1
+ *
+ * NPC AF Constants 1 Register This register contains constants for
+ * software discovery.
+ */
+union npc_af_const1 {
+ u64 u;
+ struct npc_af_const1_s {
+ u64 kpu_entries : 12;
+ u64 pkinds : 8;
+ u64 cpi_size : 16;
+ u64 reserved_36_63 : 28;
+ } s;
+ /* struct npc_af_const1_s cn; */
+};
+
+static inline u64 NPC_AF_CONST1(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CONST1(void)
+{
+ return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_cpi#_cfg
+ *
+ * NPC AF Channel Parse Index Table Registers
+ */
+union npc_af_cpix_cfg {
+ u64 u;
+ struct npc_af_cpix_cfg_s {
+ u64 padd : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct npc_af_cpix_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_CPIX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CPIX_CFG(u64 a)
+{
+ return 0x200000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_ctl
+ *
+ * NPC AF Debug Control Register This register controls the capture of
+ * debug information in NPC_AF_KPU()_DBG, NPC_AF_MCAM_DBG,
+ * NPC_AF_DBG_DATA() and NPC_AF_DBG_RESULT().
+ */
+union npc_af_dbg_ctl {
+ u64 u;
+ struct npc_af_dbg_ctl_s {
+ u64 continuous : 1;
+ u64 lkup_dbg : 1;
+ u64 intf_dbg : 4;
+ u64 reserved_6_63 : 58;
+ } s;
+ /* struct npc_af_dbg_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_CTL(void)
+{
+ return 0x3000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_data#
+ *
+ * NPC AF Debug Data Registers These registers contain the packet header
+ * data of the last packet/lookup whose debug information is captured by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG].
+ */
+union npc_af_dbg_datax {
+ u64 u;
+ struct npc_af_dbg_datax_s {
+ u64 data : 64;
+ } s;
+ /* struct npc_af_dbg_datax_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_DATAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_DATAX(u64 a)
+{
+ return 0x3001400 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_result#
+ *
+ * NPC AF Debug Result Registers These registers contain the result data
+ * of the last packet/lookup whose debug information is captured by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG]. Internal: FIXME - add note about
+ * coherency of data in continuous packet capture mode.
+ */
+union npc_af_dbg_resultx {
+ u64 u;
+ struct npc_af_dbg_resultx_s {
+ u64 data : 64;
+ } s;
+ /* struct npc_af_dbg_resultx_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_RESULTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_RESULTX(u64 a)
+{
+ return 0x3001800 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_status
+ *
+ * NPC AF Debug Status Register
+ */
+union npc_af_dbg_status {
+ u64 u;
+ struct npc_af_dbg_status_s {
+ u64 done : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npc_af_dbg_status_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_STATUS(void)
+{
+ return 0x3000010;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dv_fc_scratch
+ *
+ * INTERNAL: NPC AF Scratch Register Internal: This register is for
+ * internal DV purpose.
+ */
+union npc_af_dv_fc_scratch {
+ u64 u;
+ struct npc_af_dv_fc_scratch_s {
+ u64 it : 64;
+ } s;
+ /* struct npc_af_dv_fc_scratch_s cn; */
+};
+
+static inline u64 NPC_AF_DV_FC_SCRATCH(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DV_FC_SCRATCH(void)
+{
+ return 0x60;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_eco0
+ *
+ * INTERNAL: ECO 0 Register
+ */
+union npc_af_eco0 {
+ u64 u;
+ struct npc_af_eco0_s {
+ u64 eco_rw : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct npc_af_eco0_s cn; */
+};
+
+static inline u64 NPC_AF_ECO0(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_ECO0(void)
+{
+ return 0x200;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_ikpu_err_ctl
+ *
+ * NPC AF Initial KPU Error Control Registers Similar to
+ * NPC_AF_KPU()_ERR_CTL, but specifies values captured in
+ * NPC_RESULT_S[ERRLEV,ERRCODE] for errors detected by the PKIND-based
+ * initial actions from NPC_AF_PKIND()_ACTION0 and
+ * NPC_AF_PKIND()_ACTION1. [DP_OFFSET_ERRCODE] from this register is
+ * never used.
+ */
+union npc_af_ikpu_err_ctl {
+ u64 u;
+ struct npc_af_ikpu_err_ctl_s {
+ u64 errlev : 4;
+ u64 dp_offset_errcode : 8;
+ u64 ptr_advance_errcode : 8;
+ u64 var_len_offset_errcode : 8;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct npc_af_ikpu_err_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_IKPU_ERR_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_IKPU_ERR_CTL(void)
+{
+ return 0x3000080;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_kex_cfg
+ *
+ * NPC AF Interface Key Extract Configuration Registers
+ */
+union npc_af_intfx_kex_cfg {
+ u64 u;
+ struct npc_af_intfx_kex_cfg_s {
+ u64 parse_nibble_ena : 31;
+ u64 reserved_31 : 1;
+ u64 keyw : 3;
+ u64 reserved_35_63 : 29;
+ } s;
+ /* struct npc_af_intfx_kex_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_KEX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_KEX_CFG(u64 a)
+{
+ return 0x1010 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_ldata#_flags#_cfg
+ *
+ * NPC AF Interface Layer Data Flags Configuration Registers These
+ * registers control the extraction of layer data (LDATA) into the MCAM
+ * search key for each interface based on the FLAGS\<3:0\> bits of two
+ * layers selected by NPC_AF_KEX_LDATA()_FLAGS_CFG.
+ */
+union npc_af_intfx_ldatax_flagsx_cfg {
+ u64 u;
+ struct npc_af_intfx_ldatax_flagsx_cfg_s {
+ u64 key_offset : 6;
+ u64 reserved_6 : 1;
+ u64 ena : 1;
+ u64 hdr_offset : 8;
+ u64 bytesm1 : 4;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npc_af_intfx_ldatax_flagsx_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_LDATAX_FLAGSX_CFG(u64 a, u64 b, u64 c)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_LDATAX_FLAGSX_CFG(u64 a, u64 b, u64 c)
+{
+ return 0x980000 + 0x10000 * a + 0x1000 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_lid#_lt#_ld#_cfg
+ *
+ * NPC AF Interface Layer Data Extract Configuration Registers These
+ * registers control the extraction of layer data (LDATA) into the MCAM
+ * search key for each interface. Up to two LDATA fields can be extracted
+ * per layer (LID(0..7) indexed by NPC_LID_E), with up to 16 bytes per
+ * LDATA field. For each layer, the corresponding NPC_LAYER_INFO_S[LTYPE]
+ * value in NPC_RESULT_S is used as the LTYPE(0..15) index and select the
+ * associated LDATA(0..1) registers. NPC_LAYER_INFO_S[LTYPE]=0x0 means
+ * the corresponding layer not parsed (invalid), so software should keep
+ * NPC_AF_INTF()_LID()_LT(0)_LD()_CFG[ENA] clear to disable extraction
+ * when LTYPE is zero.
+ */
+union npc_af_intfx_lidx_ltx_ldx_cfg {
+ u64 u;
+ struct npc_af_intfx_lidx_ltx_ldx_cfg_s {
+ u64 key_offset : 6;
+ u64 flags_ena : 1;
+ u64 ena : 1;
+ u64 hdr_offset : 8;
+ u64 bytesm1 : 4;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npc_af_intfx_lidx_ltx_ldx_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_LIDX_LTX_LDX_CFG(u64 a, u64 b, u64 c, u64 d)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_LIDX_LTX_LDX_CFG(u64 a, u64 b, u64 c, u64 d)
+{
+ return 0x900000 + 0x10000 * a + 0x1000 * b + 0x20 * c + 8 * d;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_miss_act
+ *
+ * NPC AF Interface MCAM Miss Action Data Registers When a combination of
+ * NPC_AF_MCAME()_BANK()_CAM()_* and NPC_AF_MCAME()_BANK()_CFG[ENA]
+ * yields an MCAM miss for a packet, this register specifies the packet's
+ * match action captured in NPC_RESULT_S[ACTION].
+ */
+union npc_af_intfx_miss_act {
+ u64 u;
+ struct npc_af_intfx_miss_act_s {
+ u64 action : 64;
+ } s;
+ /* struct npc_af_intfx_miss_act_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_MISS_ACT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_MISS_ACT(u64 a)
+{
+ return 0x1a00000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_miss_stat_act
+ *
+ * NPC AF Interface MCAM Miss Stat Action Data Registers Used to
+ * optionally increment a NPC_AF_MATCH_STAT() counter when a packet
+ * misses an MCAM entry.
+ */
+union npc_af_intfx_miss_stat_act {
+ u64 u;
+ struct npc_af_intfx_miss_stat_act_s {
+ u64 stat_sel : 9;
+ u64 ena : 1;
+ u64 reserved_10_63 : 54;
+ } s;
+ /* struct npc_af_intfx_miss_stat_act_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_MISS_STAT_ACT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_MISS_STAT_ACT(u64 a)
+{
+ return 0x1880040 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_miss_tag_act
+ *
+ * NPC AF Interface MCAM Miss VTag Action Data Registers When a
+ * combination of NPC_AF_MCAME()_BANK()_CAM()_* and
+ * NPC_AF_MCAME()_BANK()_CFG[ENA] yields an MCAM miss for a packet, this
+ * register specifies the packet's match Vtag action captured in
+ * NPC_RESULT_S[VTAG_ACTION].
+ */
+union npc_af_intfx_miss_tag_act {
+ u64 u;
+ struct npc_af_intfx_miss_tag_act_s {
+ u64 vtag_action : 64;
+ } s;
+ /* struct npc_af_intfx_miss_tag_act_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_MISS_TAG_ACT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_MISS_TAG_ACT(u64 a)
+{
+ return 0x1b00008 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_stat
+ *
+ * NPC AF Interface Statistics Registers Statistics per interface. Index
+ * enumerated by NPC_INTF_E.
+ */
+union npc_af_intfx_stat {
+ u64 u;
+ struct npc_af_intfx_stat_s {
+ u64 count : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct npc_af_intfx_stat_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_STAT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_STAT(u64 a)
+{
+ return 0x2000800 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kcam_scrub_ctl
+ *
+ * NPC AF KCAM Scrub Control Register
+ */
+union npc_af_kcam_scrub_ctl {
+ u64 u;
+ struct npc_af_kcam_scrub_ctl_s {
+ u64 ena : 1;
+ u64 reserved_1_7 : 7;
+ u64 lp_dis : 1;
+ u64 reserved_9_15 : 7;
+ u64 toth : 4;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npc_af_kcam_scrub_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_KCAM_SCRUB_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KCAM_SCRUB_CTL(void)
+{
+ return 0xb0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kex_ldata#_flags_cfg
+ *
+ * NPC AF Key Extract Layer Data Flags Configuration Register
+ */
+union npc_af_kex_ldatax_flags_cfg {
+ u64 u;
+ struct npc_af_kex_ldatax_flags_cfg_s {
+ u64 lid : 3;
+ u64 reserved_3_63 : 61;
+ } s;
+ /* struct npc_af_kex_ldatax_flags_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_KEX_LDATAX_FLAGS_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KEX_LDATAX_FLAGS_CFG(u64 a)
+{
+ return 0x800 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_cfg
+ *
+ * NPC AF KPU Configuration Registers
+ */
+union npc_af_kpux_cfg {
+ u64 u;
+ struct npc_af_kpux_cfg_s {
+ u64 ena : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npc_af_kpux_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_CFG(u64 a)
+{
+ return 0x500 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_dbg
+ *
+ * NPC AF KPU Debug Registers This register contains information for the
+ * last packet/lookup for which debug is enabled by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG]. The register contents are undefined
+ * when debug information is captured for a software key lookup
+ * (NPC_AF_LKUP_CTL[OP] = NPC_LKUPOP_E::KEY).
+ */
+union npc_af_kpux_dbg {
+ u64 u;
+ struct npc_af_kpux_dbg_s {
+ u64 hit_entry : 8;
+ u64 byp : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct npc_af_kpux_dbg_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_DBG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_DBG(u64 a)
+{
+ return 0x3000020 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry#_action0
+ *
+ * NPC AF KPU Entry Action Data 0 Registers When a KPU's search data
+ * matches a KPU CAM entry in NPC_AF_KPU()_ENTRY()_CAM(), the
+ * corresponding entry action in NPC_AF_KPU()_ENTRY()_ACTION0 and
+ * NPC_AF_KPU()_ENTRY()_ACTION1 specifies the next state and operations
+ * to perform before exiting the KPU.
+ */
+union npc_af_kpux_entryx_action0 {
+ u64 u;
+ struct npc_af_kpux_entryx_action0_s {
+ u64 var_len_shift : 3;
+ u64 var_len_right : 1;
+ u64 var_len_mask : 8;
+ u64 var_len_offset : 8;
+ u64 ptr_advance : 8;
+ u64 capture_flags : 8;
+ u64 capture_ltype : 4;
+ u64 capture_lid : 3;
+ u64 reserved_43 : 1;
+ u64 next_state : 8;
+ u64 parse_done : 1;
+ u64 capture_ena : 1;
+ u64 byp_count : 3;
+ u64 reserved_57_63 : 7;
+ } s;
+ /* struct npc_af_kpux_entryx_action0_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION0(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION0(u64 a, u64 b)
+{
+ return 0x100020 + 0x4000 * a + 0x40 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry#_action1
+ *
+ * NPC AF KPU Entry Action Data 0 Registers See
+ * NPC_AF_KPU()_ENTRY()_ACTION0.
+ */
+union npc_af_kpux_entryx_action1 {
+ u64 u;
+ struct npc_af_kpux_entryx_action1_s {
+ u64 dp0_offset : 8;
+ u64 dp1_offset : 8;
+ u64 dp2_offset : 8;
+ u64 errcode : 8;
+ u64 errlev : 4;
+ u64 reserved_36_63 : 28;
+ } s;
+ /* struct npc_af_kpux_entryx_action1_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION1(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION1(u64 a, u64 b)
+{
+ return 0x100028 + 0x4000 * a + 0x40 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry#_cam#
+ *
+ * NPC AF KPU Entry CAM Registers KPU comparison ternary data. The field
+ * values in NPC_AF_KPU()_ENTRY()_CAM() are ternary, where each data bit
+ * of the search key matches as follows: _ [CAM(1)]\<n\>=0,
+ * [CAM(0)]\<n\>=0: Always match; search key data\<n\> don't care. _
+ * [CAM(1)]\<n\>=0, [CAM(0)]\<n\>=1: Match when search key data\<n\> ==
+ * 0. _ [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=0: Match when search key data\<n\>
+ * == 1. _ [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=1: Reserved. The reserved
+ * combination is not allowed. Hardware suppresses any write to CAM(0) or
+ * CAM(1) that would result in the reserved combination for any CAM bit.
+ * The reset value for all non-reserved fields is all zeros for CAM(1)
+ * and all ones for CAM(0), matching a search key of all zeros. Software
+ * must program a default entry for each KPU, e.g. by programming each
+ * KPU's last entry {b} (NPC_AF_KPU()_ENTRY({b})_CAM()) to always match
+ * all bits.
+ */
+union npc_af_kpux_entryx_camx {
+ u64 u;
+ struct npc_af_kpux_entryx_camx_s {
+ u64 dp0_data : 16;
+ u64 dp1_data : 16;
+ u64 dp2_data : 16;
+ u64 state : 8;
+ u64 reserved_56_63 : 8;
+ } s;
+ /* struct npc_af_kpux_entryx_camx_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRYX_CAMX(u64 a, u64 b, u64 c)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRYX_CAMX(u64 a, u64 b, u64 c)
+{
+ return 0x100000 + 0x4000 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry_dis#
+ *
+ * NPC AF KPU Entry Disable Registers See NPC_AF_KPU()_ENTRY()_ACTION0.
+ */
+union npc_af_kpux_entry_disx {
+ u64 u;
+ struct npc_af_kpux_entry_disx_s {
+ u64 dis : 64;
+ } s;
+ /* struct npc_af_kpux_entry_disx_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRY_DISX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRY_DISX(u64 a, u64 b)
+{
+ return 0x180000 + 0x40 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_err_ctl
+ *
+ * NPC AF KPU Error Control Registers This register specifies values
+ * captured in NPC_RESULT_S[ERRLEV,ERRCODE] when errors are detected by a
+ * KPU.
+ */
+union npc_af_kpux_err_ctl {
+ u64 u;
+ struct npc_af_kpux_err_ctl_s {
+ u64 errlev : 4;
+ u64 dp_offset_errcode : 8;
+ u64 ptr_advance_errcode : 8;
+ u64 var_len_offset_errcode : 8;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct npc_af_kpux_err_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ERR_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ERR_CTL(u64 a)
+{
+ return 0x30000a0 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu_diag
+ *
+ * INTERNAL : NPC AF Debug Result Registers
+ */
+union npc_af_kpu_diag {
+ u64 u;
+ struct npc_af_kpu_diag_s {
+ u64 skip_dis : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npc_af_kpu_diag_s cn; */
+};
+
+static inline u64 NPC_AF_KPU_DIAG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPU_DIAG(void)
+{
+ return 0x3002000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_lkup_ctl
+ *
+ * NPC AF Software Lookup Control Registers
+ */
+union npc_af_lkup_ctl {
+ u64 u;
+ struct npc_af_lkup_ctl_s {
+ u64 intf : 2;
+ u64 pkind : 6;
+ u64 chan : 12;
+ u64 hdr_sizem1 : 8;
+ u64 op : 3;
+ u64 exec : 1;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct npc_af_lkup_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_LKUP_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_LKUP_CTL(void)
+{
+ return 0x2000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_lkup_data#
+ *
+ * NPC AF Software Lookup Data Registers
+ */
+union npc_af_lkup_datax {
+ u64 u;
+ struct npc_af_lkup_datax_s {
+ u64 data : 64;
+ } s;
+ /* struct npc_af_lkup_datax_s cn; */
+};
+
+static inline u64 NPC_AF_LKUP_DATAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_LKUP_DATAX(u64 a)
+{
+ return 0x2000200 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_lkup_result#
+ *
+ * NPC AF Software Lookup Result Registers
+ */
+union npc_af_lkup_resultx {
+ u64 u;
+ struct npc_af_lkup_resultx_s {
+ u64 data : 64;
+ } s;
+ /* struct npc_af_lkup_resultx_s cn; */
+};
+
+static inline u64 NPC_AF_LKUP_RESULTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_LKUP_RESULTX(u64 a)
+{
+ return 0x2000400 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_match_stat#
+ *
+ * NPC AF Match Statistics Registers
+ */
+union npc_af_match_statx {
+ u64 u;
+ struct npc_af_match_statx_s {
+ u64 count : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct npc_af_match_statx_s cn; */
+};
+
+static inline u64 NPC_AF_MATCH_STATX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MATCH_STATX(u64 a)
+{
+ return 0x1880008 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcam_bank#_hit#
+ *
+ * NPC AF MCAM Bank Hit Registers
+ */
+union npc_af_mcam_bankx_hitx {
+ u64 u;
+ struct npc_af_mcam_bankx_hitx_s {
+ u64 hit : 64;
+ } s;
+ /* struct npc_af_mcam_bankx_hitx_s cn; */
+};
+
+static inline u64 NPC_AF_MCAM_BANKX_HITX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAM_BANKX_HITX(u64 a, u64 b)
+{
+ return 0x1c80000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcam_dbg
+ *
+ * NPC AF MCAM Debug Register This register contains information for the
+ * last packet/lookup for which debug is enabled by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG].
+ */
+union npc_af_mcam_dbg {
+ u64 u;
+ struct npc_af_mcam_dbg_s {
+ u64 hit_entry : 10;
+ u64 reserved_10_11 : 2;
+ u64 hit_bank : 2;
+ u64 reserved_14_15 : 2;
+ u64 miss : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct npc_af_mcam_dbg_s cn; */
+};
+
+static inline u64 NPC_AF_MCAM_DBG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAM_DBG(void)
+{
+ return 0x3001000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcam_scrub_ctl
+ *
+ * NPC AF MCAM Scrub Control Register
+ */
+union npc_af_mcam_scrub_ctl {
+ u64 u;
+ struct npc_af_mcam_scrub_ctl_s {
+ u64 ena : 1;
+ u64 reserved_1_7 : 7;
+ u64 lp_dis : 1;
+ u64 reserved_9_15 : 7;
+ u64 toth : 4;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct npc_af_mcam_scrub_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_MCAM_SCRUB_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAM_SCRUB_CTL(void)
+{
+ return 0xa0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_action
+ *
+ * NPC AF MCAM Entry Bank Action Data Registers Specifies a packet's
+ * match action captured in NPC_RESULT_S[ACTION]. When an interface is
+ * configured to use the NPC_MCAM_KEY_X2_S search key format
+ * (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X2), *
+ * NPC_AF_MCAME()_BANK(0)_ACTION/_TAG_ACT/_STAT_ACT are used if the
+ * search key matches NPC_AF_MCAME()_BANK(0..1)_CAM()_W*. *
+ * NPC_AF_MCAME()_BANK(2)_ACTION/_TAG_ACT/_STAT_ACT are used if the
+ * search key matches NPC_AF_MCAME()_BANK(2..3)_CAM()_W*. *
+ * NPC_AF_MCAME()_BANK(1,3)_ACTION/_TAG_ACT/_STAT_ACT are not used. When
+ * an interface is configured to use the NPC_MCAM_KEY_X4_S search key
+ * format (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X4): *
+ * NPC_AF_MCAME()_BANK(0)_ACTION/_TAG_ACT/_STAT_ACT are used if the
+ * search key matches NPC_AF_MCAME()_BANK(0..3)_CAM()_W*. *
+ * NPC_AF_MCAME()_BANK(1..3)_ACTION/_TAG_ACT/_STAT_ACT are not used.
+ */
+union npc_af_mcamex_bankx_action {
+ u64 u;
+ struct npc_af_mcamex_bankx_action_s {
+ u64 action : 64;
+ } s;
+ /* struct npc_af_mcamex_bankx_action_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_ACTION(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_ACTION(u64 a, u64 b)
+{
+ return 0x1900000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cam#_intf
+ *
+ * NPC AF MCAM Entry Bank CAM Data Interface Registers MCAM comparison
+ * ternary data interface word. The field values in
+ * NPC_AF_MCAME()_BANK()_CAM()_INTF, NPC_AF_MCAME()_BANK()_CAM()_W0 and
+ * NPC_AF_MCAME()_BANK()_CAM()_W1 are ternary, where each data bit of
+ * the search key matches as follows: _ [CAM(1)]\<n\>=0, [CAM(0)]\<n\>=0:
+ * Always match; search key data\<n\> don't care. _ [CAM(1)]\<n\>=0,
+ * [CAM(0)]\<n\>=1: Match when search key data\<n\> == 0. _
+ * [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=0: Match when search key data\<n\> ==
+ * 1. _ [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=1: Reserved. The reserved
+ * combination is not allowed. Hardware suppresses any write to CAM(0) or
+ * CAM(1) that would result in the reserved combination for any CAM bit.
+ * The reset value for all non-reserved fields in
+ * NPC_AF_MCAME()_BANK()_CAM()_INTF, NPC_AF_MCAME()_BANK()_CAM()_W0 and
+ * NPC_AF_MCAME()_BANK()_CAM()_W1 is all zeros for CAM(1) and all ones
+ * for CAM(0), matching a search key of all zeros. When an interface is
+ * configured to use the NPC_MCAM_KEY_X1_S search key format
+ * (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X1), the four banks of
+ * every MCAM entry are used as individual entries, each of which is
+ * independently compared with the search key as follows: _
+ * NPC_AF_MCAME()_BANK()_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X1_S[INTF]. _ NPC_AF_MCAME()_BANK()_CAM()_W0[MD]
+ * corresponds to NPC_MCAM_KEY_X1_S[KW0]. _
+ * NPC_AF_MCAME()_BANK()_CAM()_W1[MD] corresponds to
+ * NPC_MCAM_KEY_X1_S[KW1]. When an interface is configured to use the
+ * NPC_MCAM_KEY_X2_S search key format (NPC_AF_INTF()_KEX_CFG[KEYW] =
+ * NPC_MCAMKEYW_E::X2), banks 0-1 of every MCAM entry are used as one
+ * double-wide entry, banks 2-3 as a second double-wide entry, and each
+ * double-wide entry is independently compared with the search key as
+ * follows: _ NPC_AF_MCAME()_BANK(0,2)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X2_S[INTF]. _ NPC_AF_MCAME()_BANK(0,2)_CAM()_W0[MD]
+ * corresponds to NPC_MCAM_KEY_X2_S[KW0]. _
+ * NPC_AF_MCAME()_BANK(0,2)_CAM()_W1[MD] corresponds to
+ * NPC_MCAM_KEY_X2_S[KW1]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X2_S[INTF]. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W0[MD]\<15:0\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW1]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W0[MD]\<63:16\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW2]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W1[MD]\<15:0\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW2]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W1[MD]\<47:16\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW3]\<31:0\>. When an interface is configured to
+ * use the NPC_MCAM_KEY_X4_S search key format
+ * (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X4), the four banks of
+ * every MCAM entry are used as a single quad-wide entry that is compared
+ * with the search key as follows: _
+ * NPC_AF_MCAME()_BANK(0)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(0)_CAM()_W0[MD]
+ * corresponds to NPC_MCAM_KEY_X4_S[KW0]. _
+ * NPC_AF_MCAME()_BANK(0)_CAM()_W1[MD] corresponds to
+ * NPC_MCAM_KEY_X4_S[KW1]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(1)_CAM()_W0[MD]\<15:0\>
+ * corresponds to NPC_MCAM_KEY_X4_S[KW1]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_W0[MD]\<63:16\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW2]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_W1[MD]\<15:0\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW2]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_W1[MD]\<47:16\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW3]\<31:0\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(2)_CAM()_W0[MD]\<31:0\>
+ * corresponds to NPC_MCAM_KEY_X4_S[KW3]\<63:32\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_W0[MD]\<63:32\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW4]\<31:0\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_W1[MD]\<31:0\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW4]\<63:32\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_W1[MD]\<47:32\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW5]\<15:0\>. _
+ * NPC_AF_MCAME()_BANK(3)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(3)_CAM()_W0[MD]\<47:0\>
+ * corresponds to NPC_MCAM_KEY_X4_S[KW5]\<63:16\>. _
+ * NPC_AF_MCAME()_BANK(3)_CAM()_W0[MD]\<63:48\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW6]\<15:0\>. _ NPC_AF_MCAME()_BANK(3)_CAM()_W1[MD]
+ * corresponds to NPC_MCAM_KEY_X4_S[KW6]\<63:16\>. Note that for the X2
+ * and X4 formats, a wide entry will not match unless the INTF fields
+ * from the associated two or four banks match the INTF value from the
+ * search key. For the X1 and X2 formats, a match in a lower-numbered
+ * bank takes priority over a match in any higher numbered banks. Within
+ * each bank, the lowest numbered matching entry takes priority over any
+ * higher numbered entry.
+ */
+union npc_af_mcamex_bankx_camx_intf {
+ u64 u;
+ struct npc_af_mcamex_bankx_camx_intf_s {
+ u64 intf : 2;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct npc_af_mcamex_bankx_camx_intf_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_INTF(u64 a, u64 b, u64 c)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_INTF(u64 a, u64 b, u64 c)
+{
+ return 0x1000000 + 0x400 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cam#_w0
+ *
+ * NPC AF MCAM Entry Bank CAM Data Word 0 Registers MCAM comparison
+ * ternary data word 0. See NPC_AF_MCAME()_BANK()_CAM()_INTF.
+ */
+union npc_af_mcamex_bankx_camx_w0 {
+ u64 u;
+ struct npc_af_mcamex_bankx_camx_w0_s {
+ u64 md : 64;
+ } s;
+ /* struct npc_af_mcamex_bankx_camx_w0_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W0(u64 a, u64 b, u64 c)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W0(u64 a, u64 b, u64 c)
+{
+ return 0x1000010 + 0x400 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cam#_w1
+ *
+ * NPC AF MCAM Entry Bank Data Word 1 Registers MCAM comparison ternary
+ * data word 1. See NPC_AF_MCAME()_BANK()_CAM()_INTF.
+ */
+union npc_af_mcamex_bankx_camx_w1 {
+ u64 u;
+ struct npc_af_mcamex_bankx_camx_w1_s {
+ u64 md : 48;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct npc_af_mcamex_bankx_camx_w1_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W1(u64 a, u64 b, u64 c)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W1(u64 a, u64 b, u64 c)
+{
+ return 0x1000020 + 0x400 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cfg
+ *
+ * NPC AF MCAM Entry Bank Configuration Registers
+ */
+union npc_af_mcamex_bankx_cfg {
+ u64 u;
+ struct npc_af_mcamex_bankx_cfg_s {
+ u64 ena : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct npc_af_mcamex_bankx_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CFG(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CFG(u64 a, u64 b)
+{
+ return 0x1800000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_stat_act
+ *
+ * NPC AF MCAM Entry Bank Statistics Action Registers Used to optionally
+ * increment a NPC_AF_MATCH_STAT() counter when a packet matches an MCAM
+ * entry. See also NPC_AF_MCAME()_BANK()_ACTION.
+ */
+union npc_af_mcamex_bankx_stat_act {
+ u64 u;
+ struct npc_af_mcamex_bankx_stat_act_s {
+ u64 stat_sel : 9;
+ u64 ena : 1;
+ u64 reserved_10_63 : 54;
+ } s;
+ /* struct npc_af_mcamex_bankx_stat_act_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_STAT_ACT(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_STAT_ACT(u64 a, u64 b)
+{
+ return 0x1880000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_tag_act
+ *
+ * NPC AF MCAM Entry Bank VTag Action Data Registers Specifies a packet's
+ * match Vtag action captured in NPC_RESULT_S[VTAG_ACTION]. See also
+ * NPC_AF_MCAME()_BANK()_ACTION.
+ */
+union npc_af_mcamex_bankx_tag_act {
+ u64 u;
+ struct npc_af_mcamex_bankx_tag_act_s {
+ u64 vtag_action : 64;
+ } s;
+ /* struct npc_af_mcamex_bankx_tag_act_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_TAG_ACT(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_TAG_ACT(u64 a, u64 b)
+{
+ return 0x1900008 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_cfg
+ *
+ * NPC AF Protocol Check Configuration Register
+ */
+union npc_af_pck_cfg {
+ u64 u;
+ struct npc_af_pck_cfg_s {
+ u64 reserved_0 : 1;
+ u64 iip4_cksum : 1;
+ u64 oip4_cksum : 1;
+ u64 reserved_3 : 1;
+ u64 l3b : 1;
+ u64 l3m : 1;
+ u64 l2b : 1;
+ u64 l2m : 1;
+ u64 reserved_8_23 : 16;
+ u64 iip4_cksum_errcode : 8;
+ u64 oip4_cksum_errcode : 8;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct npc_af_pck_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_CFG(void)
+{
+ return 0x600;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_iip4
+ *
+ * NPC AF Protocol Check Inner IPv4 Definition Register Provides layer
+ * information used by the protocol checker to identify an inner IPv4
+ * header.
+ */
+union npc_af_pck_def_iip4 {
+ u64 u;
+ struct npc_af_pck_def_iip4_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct npc_af_pck_def_iip4_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_IIP4(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_IIP4(void)
+{
+ return 0x640;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_oip4
+ *
+ * NPC AF Protocol Check Outer IPv4 Definition Register Provides layer
+ * information used by the protocol checker to identify an outer IPv4
+ * header.
+ */
+union npc_af_pck_def_oip4 {
+ u64 u;
+ struct npc_af_pck_def_oip4_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct npc_af_pck_def_oip4_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_OIP4(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_OIP4(void)
+{
+ return 0x620;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_oip6
+ *
+ * NPC AF Protocol Check Outer IPv6 Definition Register Provides layer
+ * information used by the protocol checker to identify an outer IPv6
+ * header. [LID] must have the same value as NPC_AF_PCK_DEF_OIP4[LID].
+ */
+union npc_af_pck_def_oip6 {
+ u64 u;
+ struct npc_af_pck_def_oip6_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct npc_af_pck_def_oip6_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_OIP6(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_OIP6(void)
+{
+ return 0x630;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_ol2
+ *
+ * NPC AF Protocol Check Outer L2 Definition Register Provides layer
+ * information used by the protocol checker to identify an outer L2
+ * header.
+ */
+union npc_af_pck_def_ol2 {
+ u64 u;
+ struct npc_af_pck_def_ol2_s {
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct npc_af_pck_def_ol2_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_OL2(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_OL2(void)
+{
+ return 0x610;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pkind#_action0
+ *
+ * NPC AF Port Kind Action Data 0 Registers NPC_AF_PKIND()_ACTION0 and
+ * NPC_AF_PKIND()_ACTION1 specify the initial parse state and operations
+ * to perform before entering KPU 0.
+ */
+union npc_af_pkindx_action0 {
+ u64 u;
+ struct npc_af_pkindx_action0_s {
+ u64 var_len_shift : 3;
+ u64 var_len_right : 1;
+ u64 var_len_mask : 8;
+ u64 var_len_offset : 8;
+ u64 ptr_advance : 8;
+ u64 capture_flags : 8;
+ u64 capture_ltype : 4;
+ u64 capture_lid : 3;
+ u64 reserved_43 : 1;
+ u64 next_state : 8;
+ u64 parse_done : 1;
+ u64 capture_ena : 1;
+ u64 byp_count : 3;
+ u64 reserved_57_63 : 7;
+ } s;
+ /* struct npc_af_pkindx_action0_s cn; */
+};
+
+static inline u64 NPC_AF_PKINDX_ACTION0(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PKINDX_ACTION0(u64 a)
+{
+ return 0x80000 + 0x40 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pkind#_action1
+ *
+ * NPC AF Port Kind Action Data 1 Registers NPC_AF_PKIND()_ACTION0 and
+ * NPC_AF_PKIND()_ACTION1 specify the initial parse state and operations
+ * to perform before entering KPU 0.
+ */
+union npc_af_pkindx_action1 {
+ u64 u;
+ struct npc_af_pkindx_action1_s {
+ u64 dp0_offset : 8;
+ u64 dp1_offset : 8;
+ u64 dp2_offset : 8;
+ u64 errcode : 8;
+ u64 errlev : 4;
+ u64 reserved_36_63 : 28;
+ } s;
+ /* struct npc_af_pkindx_action1_s cn; */
+};
+
+static inline u64 NPC_AF_PKINDX_ACTION1(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PKINDX_ACTION1(u64 a)
+{
+ return 0x80008 + 0x40 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pkind#_cpi_def#
+ *
+ * NPC AF Port Kind Channel Parse Index Definition Registers These
+ * registers specify the layer information and algorithm to compute a
+ * packet's channel parse index (CPI), which provides a port to channel
+ * adder for calculating NPC_RESULT_S[CHAN]. There are two CPI
+ * definitions per port kind, allowing the CPI computation to use two
+ * possible layer definitions in the parsed packet, e.g. DiffServ DSCP
+ * from either IPv4 or IPv6 header. CPI pseudocode: \<pre\> for (i = 0;
+ * i \< 2; i++) { cpi_def = NPC_AF_PKIND()_CPI_DEF(i); LX = LA, LB,
+ * ..., or LH as selected by cpi_def[LID]; if (cpi_def[ENA] &&
+ * ((cpi_def[LTYPE_MATCH] & cpi_def[LTYPE_MASK]) ==
+ * (NPC_RESULT_S[LX[LTYPE]] & cpi_def[LTYPE_MASK])) &&
+ * ((cpi_def[FLAGS_MATCH] & cpi_def[FLAGS_MASK]) ==
+ * (NPC_RESULT_S[LX[FLAGS]] & cpi_def[FLAGS_MASK]))) { // Found
+ * matching layer nibble_offset = (2*NPC_RESULT_S[LX[LPTR]]) +
+ * cpi_def[ADD_OFFSET]; add_byte = byte at nibble_offset from start
+ * of packet; cpi_add = (add_byte & cpi_def[ADD_MASK]) \>\>
+ * cpi_def[ADD_SHIFT]; cpi = cpi_def[CPI_BASE] + cpi_add;
+ * NPC_RESULT_S[CHAN] += NPC_AF_CPI(cpi)_CFG[PADD]; break; } }
+ * \</pre\>
+ */
+union npc_af_pkindx_cpi_defx {
+ u64 u;
+ struct npc_af_pkindx_cpi_defx_s {
+ u64 cpi_base : 10;
+ u64 reserved_10_11 : 2;
+ u64 add_shift : 3;
+ u64 reserved_15 : 1;
+ u64 add_mask : 8;
+ u64 add_offset : 8;
+ u64 flags_mask : 8;
+ u64 flags_match : 8;
+ u64 ltype_mask : 4;
+ u64 ltype_match : 4;
+ u64 lid : 3;
+ u64 reserved_59_62 : 4;
+ u64 ena : 1;
+ } s;
+ /* struct npc_af_pkindx_cpi_defx_s cn; */
+};
+
+static inline u64 NPC_AF_PKINDX_CPI_DEFX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PKINDX_CPI_DEFX(u64 a, u64 b)
+{
+ return 0x80020 + 0x40 * a + 8 * b;
+}
+
+#endif /* __CSRS_NPC_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_RVU_H__
+#define __CSRS_RVU_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * RVU.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration rvu_af_int_vec_e
+ *
+ * RVU Admin Function Interrupt Vector Enumeration Enumerates the MSI-X
+ * interrupt vectors. Internal: RVU maintains the state of these vectors
+ * internally, and generates GIB messages for it without accessing the
+ * MSI-X table region in LLC/DRAM.
+ */
+#define RVU_AF_INT_VEC_E_GEN (3)
+#define RVU_AF_INT_VEC_E_MBOX (4)
+#define RVU_AF_INT_VEC_E_PFFLR (1)
+#define RVU_AF_INT_VEC_E_PFME (2)
+#define RVU_AF_INT_VEC_E_POISON (0)
+
+/**
+ * Enumeration rvu_bar_e
+ *
+ * RVU Base Address Register Enumeration Enumerates the base address
+ * registers. Internal: For documentation only.
+ */
+#define RVU_BAR_E_RVU_PFX_BAR0(a) (0x840000000000ll + 0x1000000000ll * (a))
+#define RVU_BAR_E_RVU_PFX_BAR0_SIZE 0x10000000ull
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR2(a, b) \
+ (0x840200000000ll + 0x1000000000ll * (a) + 0x2000000ll * (b))
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR2_SIZE 0x100000ull
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR4(a, b) \
+ (0x840400000000ll + 0x1000000000ll * (a) + 0x2000000ll * (b))
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR4_SIZE 0x10000ull
+
+/**
+ * Enumeration rvu_block_addr_e
+ *
+ * RVU Block Address Enumeration Enumerates addressing of RVU resource
+ * blocks within each RVU BAR, i.e. values of RVU_FUNC_ADDR_S[BLOCK] and
+ * RVU_AF_ADDR_S[BLOCK]. CNXXXX may not implement all enumerated blocks.
+ * Software can read RVU_PF/RVU_VF_BLOCK_ADDR()_DISC[IMP] to discover
+ * which blocks are implemented and enabled.
+ */
+#define RVU_BLOCK_ADDR_E_CPTX(a) (0xa + (a))
+#define RVU_BLOCK_ADDR_E_LMT (1)
+#define RVU_BLOCK_ADDR_E_NDCX(a) (0xc + (a))
+#define RVU_BLOCK_ADDR_E_NIXX(a) (4 + (a))
+#define RVU_BLOCK_ADDR_E_NPA (3)
+#define RVU_BLOCK_ADDR_E_NPC (6)
+#define RVU_BLOCK_ADDR_E_RX(a) (0 + (a))
+#define RVU_BLOCK_ADDR_E_REEX(a) (0x14 + (a))
+#define RVU_BLOCK_ADDR_E_RVUM (0)
+#define RVU_BLOCK_ADDR_E_SSO (7)
+#define RVU_BLOCK_ADDR_E_SSOW (8)
+#define RVU_BLOCK_ADDR_E_TIM (9)
+
+/**
+ * Enumeration rvu_block_type_e
+ *
+ * RVU Block Type Enumeration Enumerates values of
+ * RVU_PF/RVU_VF_BLOCK_ADDR()_DISC[BTYPE].
+ */
+#define RVU_BLOCK_TYPE_E_CPT (9)
+#define RVU_BLOCK_TYPE_E_DDF (0xb)
+#define RVU_BLOCK_TYPE_E_LMT (2)
+#define RVU_BLOCK_TYPE_E_NDC (0xa)
+#define RVU_BLOCK_TYPE_E_NIX (3)
+#define RVU_BLOCK_TYPE_E_NPA (4)
+#define RVU_BLOCK_TYPE_E_NPC (5)
+#define RVU_BLOCK_TYPE_E_RAD (0xd)
+#define RVU_BLOCK_TYPE_E_REE (0xe)
+#define RVU_BLOCK_TYPE_E_RVUM (0)
+#define RVU_BLOCK_TYPE_E_SSO (6)
+#define RVU_BLOCK_TYPE_E_SSOW (7)
+#define RVU_BLOCK_TYPE_E_TIM (8)
+#define RVU_BLOCK_TYPE_E_ZIP (0xc)
+
+/**
+ * Enumeration rvu_bus_lf_e
+ *
+ * INTERNAL: RVU Bus LF Range Enumeration Enumerates the LF range for
+ * the RVU bus. Internal: This is an enum used in csr3 virtual equations.
+ */
+#define RVU_BUS_LF_E_RVU_BUS_LFX(a) (0 + 0x2000000 * (a))
+
+/**
+ * Enumeration rvu_bus_lf_slot_e
+ *
+ * INTERNAL: RVU Bus LF Slot Range Enumeration Enumerates the LF and
+ * Slot range for the RVU bus. Internal: This is an enum used in csr3
+ * virtual equations.
+ */
+#define RVU_BUS_LF_SLOT_E_RVU_BUS_LFX_SLOTX(a, b) \
+ (0 + 0x2000000 * (a) + 0x1000 * (b))
+
+/**
+ * Enumeration rvu_bus_pf_e
+ *
+ * INTERNAL: RVU Bus PF Range Enumeration Enumerates the PF range for
+ * the RVU bus. Internal: This is an enum used in csr3 virtual equations.
+ */
+#define RVU_BUS_PF_E_RVU_BUS_PFX(a) (0ll + 0x1000000000ll * (a))
+
+/**
+ * Enumeration rvu_bus_pfvf_e
+ *
+ * INTERNAL: RVU Bus PFVF Range Enumeration Enumerates the PF and VF
+ * ranges for the RVU bus. Internal: This is an enum used in csr3 virtual
+ * equations.
+ */
+#define RVU_BUS_PFVF_E_RVU_BUS_PFX(a) (0 + 0x2000000 * (a))
+#define RVU_BUS_PFVF_E_RVU_BUS_VFX(a) (0 + 0x2000000 * (a))
+
+/**
+ * Enumeration rvu_busbar_e
+ *
+ * INTERNAL: RVU Bus Base Address Region Enumeration Enumerates the base
+ * address region for the RVU bus. Internal: This is an enum used in csr3
+ * virtual equations.
+ */
+#define RVU_BUSBAR_E_RVU_BUSBAR0 (0)
+#define RVU_BUSBAR_E_RVU_BUSBAR2 (0x200000000ll)
+
+/**
+ * Enumeration rvu_busdid_e
+ *
+ * INTERNAL: RVU Bus DID Enumeration Enumerates the DID offset for the
+ * RVU bus. Internal: This is an enum used in csr3 virtual equations.
+ */
+#define RVU_BUSDID_E_RVU_BUSDID (0x840000000000ll)
+
+/**
+ * Enumeration rvu_pf_int_vec_e
+ *
+ * RVU PF Interrupt Vector Enumeration Enumerates the MSI-X interrupt
+ * vectors.
+ */
+#define RVU_PF_INT_VEC_E_AFPF_MBOX (6)
+#define RVU_PF_INT_VEC_E_VFFLRX(a) (0 + (a))
+#define RVU_PF_INT_VEC_E_VFMEX(a) (2 + (a))
+#define RVU_PF_INT_VEC_E_VFPF_MBOXX(a) (4 + (a))
+
+/**
+ * Enumeration rvu_vf_int_vec_e
+ *
+ * RVU VF Interrupt Vector Enumeration Enumerates the MSI-X interrupt
+ * vectors.
+ */
+#define RVU_VF_INT_VEC_E_MBOX (0)
+
+/**
+ * Structure rvu_af_addr_s
+ *
+ * RVU Admin Function Register Address Structure Address format for
+ * accessing shared Admin Function (AF) registers in RVU PF BAR0. These
+ * registers may be accessed by all RVU PFs whose
+ * RVU_PRIV_PF()_CFG[AF_ENA] bit is set.
+ */
+union rvu_af_addr_s {
+ u64 u;
+ struct rvu_af_addr_s_s {
+ u64 addr : 28;
+ u64 block : 5;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct rvu_af_addr_s_s cn; */
+};
+
+/**
+ * Structure rvu_func_addr_s
+ *
+ * RVU Function-unique Address Structure Address format for accessing
+ * function-unique registers in RVU PF/FUNC BAR2.
+ */
+union rvu_func_addr_s {
+ u32 u;
+ struct rvu_func_addr_s_s {
+ u32 addr : 12;
+ u32 lf_slot : 8;
+ u32 block : 5;
+ u32 reserved_25_31 : 7;
+ } s;
+ /* struct rvu_func_addr_s_s cn; */
+};
+
+/**
+ * Structure rvu_msix_vec_s
+ *
+ * RVU MSI-X Vector Structure Format of entries in the RVU MSI-X table
+ * region in LLC/DRAM. See RVU_PRIV_PF()_MSIX_CFG.
+ */
+union rvu_msix_vec_s {
+ u64 u[2];
+ struct rvu_msix_vec_s_s {
+ u64 addr : 64;
+ u64 data : 32;
+ u64 mask : 1;
+ u64 pend : 1;
+ u64 reserved_98_127 : 30;
+ } s;
+ /* struct rvu_msix_vec_s_s cn; */
+};
+
+/**
+ * Structure rvu_pf_func_s
+ *
+ * RVU PF Function Identification Structure Identifies an RVU PF/VF, and
+ * format of *_PRIV_LF()_CFG[PF_FUNC] in RVU resource blocks, e.g.
+ * NPA_PRIV_LF()_CFG[PF_FUNC]. Internal: Also used for PF/VF
+ * identification on inter-coprocessor hardware interfaces (NPA, SSO,
+ * CPT, ...).
+ */
+union rvu_pf_func_s {
+ u32 u;
+ struct rvu_pf_func_s_s {
+ u32 func : 10;
+ u32 pf : 6;
+ u32 reserved_16_31 : 16;
+ } s;
+ /* struct rvu_pf_func_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_afpf#_mbox#
+ *
+ * RVU Admin Function AF/PF Mailbox Registers
+ */
+union rvu_af_afpfx_mboxx {
+ u64 u;
+ struct rvu_af_afpfx_mboxx_s {
+ u64 data : 64;
+ } s;
+ /* struct rvu_af_afpfx_mboxx_s cn; */
+};
+
+static inline u64 RVU_AF_AFPFX_MBOXX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_AFPFX_MBOXX(u64 a, u64 b)
+{
+ return 0x2000 + 0x10 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_bar2_alias#
+ *
+ * INTERNAL: RVU Admin Function BAR2 Alias Registers These registers
+ * alias to the RVU BAR2 registers for the PF and function selected by
+ * RVU_AF_BAR2_SEL[PF_FUNC]. Internal: Not implemented. Placeholder for
+ * bug33464.
+ */
+union rvu_af_bar2_aliasx {
+ u64 u;
+ struct rvu_af_bar2_aliasx_s {
+ u64 data : 64;
+ } s;
+ /* struct rvu_af_bar2_aliasx_s cn; */
+};
+
+static inline u64 RVU_AF_BAR2_ALIASX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BAR2_ALIASX(u64 a)
+{
+ return 0x9100000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_bar2_sel
+ *
+ * INTERNAL: RVU Admin Function BAR2 Select Register This register
+ * configures BAR2 accesses from the RVU_AF_BAR2_ALIAS() registers in
+ * BAR0. Internal: Not implemented. Placeholder for bug33464.
+ */
+union rvu_af_bar2_sel {
+ u64 u;
+ struct rvu_af_bar2_sel_s {
+ u64 alias_pf_func : 16;
+ u64 alias_ena : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct rvu_af_bar2_sel_s cn; */
+};
+
+static inline u64 RVU_AF_BAR2_SEL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BAR2_SEL(void)
+{
+ return 0x9000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_blk_rst
+ *
+ * RVU Master Admin Function Block Reset Register
+ */
+union rvu_af_blk_rst {
+ u64 u;
+ struct rvu_af_blk_rst_s {
+ u64 rst : 1;
+ u64 reserved_1_62 : 62;
+ u64 busy : 1;
+ } s;
+ /* struct rvu_af_blk_rst_s cn; */
+};
+
+static inline u64 RVU_AF_BLK_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BLK_RST(void)
+{
+ return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_bp_test
+ *
+ * INTERNAL: RVUM Backpressure Test Registers
+ */
+union rvu_af_bp_test {
+ u64 u;
+ struct rvu_af_bp_test_s {
+ u64 lfsr_freq : 12;
+ u64 reserved_12_15 : 4;
+ u64 bp_cfg : 16;
+ u64 enable : 8;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct rvu_af_bp_test_s cn; */
+};
+
+static inline u64 RVU_AF_BP_TEST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BP_TEST(void)
+{
+ return 0x4000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_eco
+ *
+ * INTERNAL: RVU Admin Function ECO Register
+ */
+union rvu_af_eco {
+ u64 u;
+ struct rvu_af_eco_s {
+ u64 eco_rw : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct rvu_af_eco_s cn; */
+};
+
+static inline u64 RVU_AF_ECO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_ECO(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int
+ *
+ * RVU Admin Function General Interrupt Register This register contains
+ * General interrupt summary bits.
+ */
+union rvu_af_gen_int {
+ u64 u;
+ struct rvu_af_gen_int_s {
+ u64 unmapped : 1;
+ u64 msix_fault : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct rvu_af_gen_int_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT(void)
+{
+ return 0x120;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int_ena_w1c
+ *
+ * RVU Admin Function General Interrupt Enable Clear Register This
+ * register clears interrupt enable bits.
+ */
+union rvu_af_gen_int_ena_w1c {
+ u64 u;
+ struct rvu_af_gen_int_ena_w1c_s {
+ u64 unmapped : 1;
+ u64 msix_fault : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct rvu_af_gen_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT_ENA_W1C(void)
+{
+ return 0x138;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int_ena_w1s
+ *
+ * RVU Admin Function General Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union rvu_af_gen_int_ena_w1s {
+ u64 u;
+ struct rvu_af_gen_int_ena_w1s_s {
+ u64 unmapped : 1;
+ u64 msix_fault : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct rvu_af_gen_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT_ENA_W1S(void)
+{
+ return 0x130;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int_w1s
+ *
+ * RVU Admin Function General Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union rvu_af_gen_int_w1s {
+ u64 u;
+ struct rvu_af_gen_int_w1s_s {
+ u64 unmapped : 1;
+ u64 msix_fault : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct rvu_af_gen_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT_W1S(void)
+{
+ return 0x128;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_hwvf_rst
+ *
+ * RVU Admin Function Hardware VF Reset Register
+ */
+union rvu_af_hwvf_rst {
+ u64 u;
+ struct rvu_af_hwvf_rst_s {
+ u64 hwvf : 8;
+ u64 reserved_8_11 : 4;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct rvu_af_hwvf_rst_s cn; */
+};
+
+static inline u64 RVU_AF_HWVF_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_HWVF_RST(void)
+{
+ return 0x2850;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_msixtr_base
+ *
+ * RVU Admin Function MSI-X Table Region Base-Address Register
+ */
+union rvu_af_msixtr_base {
+ u64 u;
+ struct rvu_af_msixtr_base_s {
+ u64 reserved_0_6 : 7;
+ u64 addr : 46;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct rvu_af_msixtr_base_s cn; */
+};
+
+static inline u64 RVU_AF_MSIXTR_BASE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_MSIXTR_BASE(void)
+{
+ return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pf#_vf_bar4_addr
+ *
+ * RVU Admin Function PF/VF BAR4 Address Registers
+ */
+union rvu_af_pfx_vf_bar4_addr {
+ u64 u;
+ struct rvu_af_pfx_vf_bar4_addr_s {
+ u64 reserved_0_15 : 16;
+ u64 addr : 48;
+ } s;
+ /* struct rvu_af_pfx_vf_bar4_addr_s cn; */
+};
+
+static inline u64 RVU_AF_PFX_VF_BAR4_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFX_VF_BAR4_ADDR(u64 a)
+{
+ return 0x1000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pf_bar4_addr
+ *
+ * RVU Admin Function PF BAR4 Address Registers
+ */
+union rvu_af_pf_bar4_addr {
+ u64 u;
+ struct rvu_af_pf_bar4_addr_s {
+ u64 reserved_0_15 : 16;
+ u64 addr : 48;
+ } s;
+ /* struct rvu_af_pf_bar4_addr_s cn; */
+};
+
+static inline u64 RVU_AF_PF_BAR4_ADDR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PF_BAR4_ADDR(void)
+{
+ return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pf_rst
+ *
+ * RVU Admin Function PF Reset Register
+ */
+union rvu_af_pf_rst {
+ u64 u;
+ struct rvu_af_pf_rst_s {
+ u64 pf : 4;
+ u64 reserved_4_11 : 8;
+ u64 exec : 1;
+ u64 reserved_13_63 : 51;
+ } s;
+ /* struct rvu_af_pf_rst_s cn; */
+};
+
+static inline u64 RVU_AF_PF_RST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PF_RST(void)
+{
+ return 0x2840;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Registers
+ */
+union rvu_af_pfaf_mbox_int {
+ u64 u;
+ struct rvu_af_pfaf_mbox_int_s {
+ u64 mbox : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfaf_mbox_int_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT(void)
+{
+ return 0x2880;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int_ena_w1c
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Enable Clear Registers
+ * This register clears interrupt enable bits.
+ */
+union rvu_af_pfaf_mbox_int_ena_w1c {
+ u64 u;
+ struct rvu_af_pfaf_mbox_int_ena_w1c_s {
+ u64 mbox : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfaf_mbox_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1C(void)
+{
+ return 0x2898;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int_ena_w1s
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Enable Set Registers
+ * This register sets interrupt enable bits.
+ */
+union rvu_af_pfaf_mbox_int_ena_w1s {
+ u64 u;
+ struct rvu_af_pfaf_mbox_int_ena_w1s_s {
+ u64 mbox : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfaf_mbox_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1S(void)
+{
+ return 0x2890;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int_w1s
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Set Registers This
+ * register sets interrupt bits.
+ */
+union rvu_af_pfaf_mbox_int_w1s {
+ u64 u;
+ struct rvu_af_pfaf_mbox_int_w1s_s {
+ u64 mbox : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfaf_mbox_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT_W1S(void)
+{
+ return 0x2888;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Registers
+ */
+union rvu_af_pfflr_int {
+ u64 u;
+ struct rvu_af_pfflr_int_s {
+ u64 flr : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfflr_int_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT(void)
+{
+ return 0x28a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int_ena_w1c
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Enable Clear
+ * Registers This register clears interrupt enable bits.
+ */
+union rvu_af_pfflr_int_ena_w1c {
+ u64 u;
+ struct rvu_af_pfflr_int_ena_w1c_s {
+ u64 flr : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfflr_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1C(void)
+{
+ return 0x28b8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int_ena_w1s
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Enable Set
+ * Registers This register sets interrupt enable bits.
+ */
+union rvu_af_pfflr_int_ena_w1s {
+ u64 u;
+ struct rvu_af_pfflr_int_ena_w1s_s {
+ u64 flr : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfflr_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1S(void)
+{
+ return 0x28b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int_w1s
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Set Registers
+ * This register sets interrupt bits.
+ */
+union rvu_af_pfflr_int_w1s {
+ u64 u;
+ struct rvu_af_pfflr_int_w1s_s {
+ u64 flr : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfflr_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT_W1S(void)
+{
+ return 0x28a8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Registers
+ */
+union rvu_af_pfme_int {
+ u64 u;
+ struct rvu_af_pfme_int_s {
+ u64 me : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfme_int_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT(void)
+{
+ return 0x28c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int_ena_w1c
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Enable Clear
+ * Registers This register clears interrupt enable bits.
+ */
+union rvu_af_pfme_int_ena_w1c {
+ u64 u;
+ struct rvu_af_pfme_int_ena_w1c_s {
+ u64 me : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfme_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT_ENA_W1C(void)
+{
+ return 0x28d8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int_ena_w1s
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Enable Set Registers
+ * This register sets interrupt enable bits.
+ */
+union rvu_af_pfme_int_ena_w1s {
+ u64 u;
+ struct rvu_af_pfme_int_ena_w1s_s {
+ u64 me : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfme_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT_ENA_W1S(void)
+{
+ return 0x28d0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int_w1s
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Set Registers This
+ * register sets interrupt bits.
+ */
+union rvu_af_pfme_int_w1s {
+ u64 u;
+ struct rvu_af_pfme_int_w1s_s {
+ u64 me : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfme_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT_W1S(void)
+{
+ return 0x28c8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_status
+ *
+ * RVU Admin Function PF Bus Master Enable Status Registers
+ */
+union rvu_af_pfme_status {
+ u64 u;
+ struct rvu_af_pfme_status_s {
+ u64 me : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pfme_status_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_STATUS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_STATUS(void)
+{
+ return 0x2800;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pftrpend
+ *
+ * RVU Admin Function PF Transaction Pending Registers
+ */
+union rvu_af_pftrpend {
+ u64 u;
+ struct rvu_af_pftrpend_s {
+ u64 trpend : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pftrpend_s cn; */
+};
+
+static inline u64 RVU_AF_PFTRPEND(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFTRPEND(void)
+{
+ return 0x2810;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pftrpend_w1s
+ *
+ * RVU Admin Function PF Transaction Pending Set Registers This register
+ * reads or sets bits.
+ */
+union rvu_af_pftrpend_w1s {
+ u64 u;
+ struct rvu_af_pftrpend_w1s_s {
+ u64 trpend : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct rvu_af_pftrpend_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFTRPEND_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFTRPEND_W1S(void)
+{
+ return 0x2820;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras
+ *
+ * RVU Admin Function RAS Interrupt Register This register is intended
+ * for delivery of RAS events to the SCP, so should be ignored by OS
+ * drivers.
+ */
+union rvu_af_ras {
+ u64 u;
+ struct rvu_af_ras_s {
+ u64 msix_poison : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_af_ras_s cn; */
+};
+
+static inline u64 RVU_AF_RAS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS(void)
+{
+ return 0x100;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras_ena_w1c
+ *
+ * RVU Admin Function RAS Interrupt Enable Clear Register This register
+ * clears interrupt enable bits.
+ */
+union rvu_af_ras_ena_w1c {
+ u64 u;
+ struct rvu_af_ras_ena_w1c_s {
+ u64 msix_poison : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_af_ras_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_RAS_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS_ENA_W1C(void)
+{
+ return 0x118;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras_ena_w1s
+ *
+ * RVU Admin Function RAS Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union rvu_af_ras_ena_w1s {
+ u64 u;
+ struct rvu_af_ras_ena_w1s_s {
+ u64 msix_poison : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_af_ras_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_RAS_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS_ENA_W1S(void)
+{
+ return 0x110;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras_w1s
+ *
+ * RVU Admin Function RAS Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union rvu_af_ras_w1s {
+ u64 u;
+ struct rvu_af_ras_w1s_s {
+ u64 msix_poison : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_af_ras_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_RAS_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS_W1S(void)
+{
+ return 0x108;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_block_addr#_disc
+ *
+ * RVU PF Block Address Discovery Registers These registers allow each PF
+ * driver to discover block resources that are provisioned to its PF. The
+ * register's BLOCK_ADDR index is enumerated by RVU_BLOCK_ADDR_E.
+ */
+union rvu_pf_block_addrx_disc {
+ u64 u;
+ struct rvu_pf_block_addrx_disc_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_10 : 2;
+ u64 imp : 1;
+ u64 rid : 8;
+ u64 btype : 8;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct rvu_pf_block_addrx_disc_s cn; */
+};
+
+static inline u64 RVU_PF_BLOCK_ADDRX_DISC(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_BLOCK_ADDRX_DISC(u64 a)
+{
+ return 0x200 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int
+ *
+ * RVU PF Interrupt Registers
+ */
+union rvu_pf_int {
+ u64 u;
+ struct rvu_pf_int_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_pf_int_s cn; */
+};
+
+static inline u64 RVU_PF_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT(void)
+{
+ return 0xc20;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int_ena_w1c
+ *
+ * RVU PF Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union rvu_pf_int_ena_w1c {
+ u64 u;
+ struct rvu_pf_int_ena_w1c_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_pf_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_PF_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT_ENA_W1C(void)
+{
+ return 0xc38;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int_ena_w1s
+ *
+ * RVU PF Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union rvu_pf_int_ena_w1s {
+ u64 u;
+ struct rvu_pf_int_ena_w1s_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_pf_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_PF_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT_ENA_W1S(void)
+{
+ return 0xc30;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int_w1s
+ *
+ * RVU PF Interrupt Set Register This register sets interrupt bits.
+ */
+union rvu_pf_int_w1s {
+ u64 u;
+ struct rvu_pf_int_w1s_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_pf_int_w1s_s cn; */
+};
+
+static inline u64 RVU_PF_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT_W1S(void)
+{
+ return 0xc28;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_msix_pba#
+ *
+ * RVU PF MSI-X Pending-Bit-Array Registers This register is the MSI-X PF
+ * PBA table.
+ */
+union rvu_pf_msix_pbax {
+ u64 u;
+ struct rvu_pf_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct rvu_pf_msix_pbax_s cn; */
+};
+
+static inline u64 RVU_PF_MSIX_PBAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_MSIX_PBAX(u64 a)
+{
+ return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_msix_vec#_addr
+ *
+ * RVU PF MSI-X Vector-Table Address Registers These registers and
+ * RVU_PF_MSIX_VEC()_CTL form the PF MSI-X vector table. The number of
+ * MSI-X vectors for a given PF is specified by
+ * RVU_PRIV_PF()_MSIX_CFG[PF_MSIXT_SIZEM1] (plus 1). Software must do a
+ * read after any writes to the MSI-X vector table to ensure that the
+ * writes have completed before interrupts are generated to the modified
+ * vectors.
+ */
+union rvu_pf_msix_vecx_addr {
+ u64 u;
+ struct rvu_pf_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 51;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct rvu_pf_msix_vecx_addr_s cn; */
+};
+
+static inline u64 RVU_PF_MSIX_VECX_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_MSIX_VECX_ADDR(u64 a)
+{
+ return 0x80000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_msix_vec#_ctl
+ *
+ * RVU PF MSI-X Vector-Table Control and Data Registers These registers
+ * and RVU_PF_MSIX_VEC()_ADDR form the PF MSI-X vector table.
+ */
+union rvu_pf_msix_vecx_ctl {
+ u64 u;
+ struct rvu_pf_msix_vecx_ctl_s {
+ u64 data : 32;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct rvu_pf_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 RVU_PF_MSIX_VECX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_MSIX_VECX_CTL(u64 a)
+{
+ return 0x80008 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_pfaf_mbox#
+ *
+ * RVU PF/AF Mailbox Registers
+ */
+union rvu_pf_pfaf_mboxx {
+ u64 u;
+ struct rvu_pf_pfaf_mboxx_s {
+ u64 data : 64;
+ } s;
+ /* struct rvu_pf_pfaf_mboxx_s cn; */
+};
+
+static inline u64 RVU_PF_PFAF_MBOXX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_PFAF_MBOXX(u64 a)
+{
+ return 0xc00 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vf#_pfvf_mbox#
+ *
+ * RVU PF/VF Mailbox Registers
+ */
+union rvu_pf_vfx_pfvf_mboxx {
+ u64 u;
+ struct rvu_pf_vfx_pfvf_mboxx_s {
+ u64 data : 64;
+ } s;
+ /* struct rvu_pf_vfx_pfvf_mboxx_s cn; */
+};
+
+static inline u64 RVU_PF_VFX_PFVF_MBOXX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFX_PFVF_MBOXX(u64 a, u64 b)
+{
+ return 0 + 0x1000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vf_bar4_addr
+ *
+ * RVU PF VF BAR4 Address Registers
+ */
+union rvu_pf_vf_bar4_addr {
+ u64 u;
+ struct rvu_pf_vf_bar4_addr_s {
+ u64 reserved_0_15 : 16;
+ u64 addr : 48;
+ } s;
+ /* struct rvu_pf_vf_bar4_addr_s cn; */
+};
+
+static inline u64 RVU_PF_VF_BAR4_ADDR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VF_BAR4_ADDR(void)
+{
+ return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int#
+ *
+ * RVU PF VF Function Level Reset Interrupt Registers
+ */
+union rvu_pf_vfflr_intx {
+ u64 u;
+ struct rvu_pf_vfflr_intx_s {
+ u64 flr : 64;
+ } s;
+ /* struct rvu_pf_vfflr_intx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INTX(u64 a)
+{
+ return 0x900 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int_ena_w1c#
+ *
+ * RVU PF VF Function Level Reset Interrupt Enable Clear Registers This
+ * register clears interrupt enable bits.
+ */
+union rvu_pf_vfflr_int_ena_w1cx {
+ u64 u;
+ struct rvu_pf_vfflr_int_ena_w1cx_s {
+ u64 flr : 64;
+ } s;
+ /* struct rvu_pf_vfflr_int_ena_w1cx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1CX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1CX(u64 a)
+{
+ return 0x960 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int_ena_w1s#
+ *
+ * RVU PF VF Function Level Reset Interrupt Enable Set Registers This
+ * register sets interrupt enable bits.
+ */
+union rvu_pf_vfflr_int_ena_w1sx {
+ u64 u;
+ struct rvu_pf_vfflr_int_ena_w1sx_s {
+ u64 flr : 64;
+ } s;
+ /* struct rvu_pf_vfflr_int_ena_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1SX(u64 a)
+{
+ return 0x940 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int_w1s#
+ *
+ * RVU PF VF Function Level Reset Interrupt Set Registers This register
+ * sets interrupt bits.
+ */
+union rvu_pf_vfflr_int_w1sx {
+ u64 u;
+ struct rvu_pf_vfflr_int_w1sx_s {
+ u64 flr : 64;
+ } s;
+ /* struct rvu_pf_vfflr_int_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INT_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INT_W1SX(u64 a)
+{
+ return 0x920 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Registers
+ */
+union rvu_pf_vfme_intx {
+ u64 u;
+ struct rvu_pf_vfme_intx_s {
+ u64 me : 64;
+ } s;
+ /* struct rvu_pf_vfme_intx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INTX(u64 a)
+{
+ return 0x980 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int_ena_w1c#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Enable Clear Registers This
+ * register clears interrupt enable bits.
+ */
+union rvu_pf_vfme_int_ena_w1cx {
+ u64 u;
+ struct rvu_pf_vfme_int_ena_w1cx_s {
+ u64 me : 64;
+ } s;
+ /* struct rvu_pf_vfme_int_ena_w1cx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INT_ENA_W1CX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INT_ENA_W1CX(u64 a)
+{
+ return 0x9e0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int_ena_w1s#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Enable Set Registers This
+ * register sets interrupt enable bits.
+ */
+union rvu_pf_vfme_int_ena_w1sx {
+ u64 u;
+ struct rvu_pf_vfme_int_ena_w1sx_s {
+ u64 me : 64;
+ } s;
+ /* struct rvu_pf_vfme_int_ena_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INT_ENA_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INT_ENA_W1SX(u64 a)
+{
+ return 0x9c0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int_w1s#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Set Registers This register sets
+ * interrupt bits.
+ */
+union rvu_pf_vfme_int_w1sx {
+ u64 u;
+ struct rvu_pf_vfme_int_w1sx_s {
+ u64 me : 64;
+ } s;
+ /* struct rvu_pf_vfme_int_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INT_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INT_W1SX(u64 a)
+{
+ return 0x9a0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_status#
+ *
+ * RVU PF VF Bus Master Enable Status Registers
+ */
+union rvu_pf_vfme_statusx {
+ u64 u;
+ struct rvu_pf_vfme_statusx_s {
+ u64 me : 64;
+ } s;
+ /* struct rvu_pf_vfme_statusx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_STATUSX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_STATUSX(u64 a)
+{
+ return 0x800 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int#
+ *
+ * RVU VF to PF Mailbox Interrupt Registers
+ */
+union rvu_pf_vfpf_mbox_intx {
+ u64 u;
+ struct rvu_pf_vfpf_mbox_intx_s {
+ u64 mbox : 64;
+ } s;
+ /* struct rvu_pf_vfpf_mbox_intx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INTX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INTX(u64 a)
+{
+ return 0x880 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int_ena_w1c#
+ *
+ * RVU VF to PF Mailbox Interrupt Enable Clear Registers This register
+ * clears interrupt enable bits.
+ */
+union rvu_pf_vfpf_mbox_int_ena_w1cx {
+ u64 u;
+ struct rvu_pf_vfpf_mbox_int_ena_w1cx_s {
+ u64 mbox : 64;
+ } s;
+ /* struct rvu_pf_vfpf_mbox_int_ena_w1cx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1CX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1CX(u64 a)
+{
+ return 0x8e0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int_ena_w1s#
+ *
+ * RVU VF to PF Mailbox Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union rvu_pf_vfpf_mbox_int_ena_w1sx {
+ u64 u;
+ struct rvu_pf_vfpf_mbox_int_ena_w1sx_s {
+ u64 mbox : 64;
+ } s;
+ /* struct rvu_pf_vfpf_mbox_int_ena_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1SX(u64 a)
+{
+ return 0x8c0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int_w1s#
+ *
+ * RVU VF to PF Mailbox Interrupt Set Registers This register sets
+ * interrupt bits.
+ */
+union rvu_pf_vfpf_mbox_int_w1sx {
+ u64 u;
+ struct rvu_pf_vfpf_mbox_int_w1sx_s {
+ u64 mbox : 64;
+ } s;
+ /* struct rvu_pf_vfpf_mbox_int_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INT_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INT_W1SX(u64 a)
+{
+ return 0x8a0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vftrpend#
+ *
+ * RVU PF VF Transaction Pending Registers
+ */
+union rvu_pf_vftrpendx {
+ u64 u;
+ struct rvu_pf_vftrpendx_s {
+ u64 trpend : 64;
+ } s;
+ /* struct rvu_pf_vftrpendx_s cn; */
+};
+
+static inline u64 RVU_PF_VFTRPENDX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFTRPENDX(u64 a)
+{
+ return 0x820 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vftrpend_w1s#
+ *
+ * RVU PF VF Transaction Pending Set Registers This register reads or
+ * sets bits.
+ */
+union rvu_pf_vftrpend_w1sx {
+ u64 u;
+ struct rvu_pf_vftrpend_w1sx_s {
+ u64 trpend : 64;
+ } s;
+ /* struct rvu_pf_vftrpend_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFTRPEND_W1SX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFTRPEND_W1SX(u64 a)
+{
+ return 0x840 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_active_pc
+ *
+ * RVU Active Program Counter Register
+ */
+union rvu_priv_active_pc {
+ u64 u;
+ struct rvu_priv_active_pc_s {
+ u64 active_pc : 64;
+ } s;
+ /* struct rvu_priv_active_pc_s cn; */
+};
+
+static inline u64 RVU_PRIV_ACTIVE_PC(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_ACTIVE_PC(void)
+{
+ return 0x8000030;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_block_type#_rev
+ *
+ * RVU Privileged Block Type Revision Registers These registers are used
+ * by configuration software to specify the revision ID of each block
+ * type enumerated by RVU_BLOCK_TYPE_E, to assist VF/PF software
+ * discovery.
+ */
+union rvu_priv_block_typex_rev {
+ u64 u;
+ struct rvu_priv_block_typex_rev_s {
+ u64 rid : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct rvu_priv_block_typex_rev_s cn; */
+};
+
+static inline u64 RVU_PRIV_BLOCK_TYPEX_REV(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_BLOCK_TYPEX_REV(u64 a)
+{
+ return 0x8000400 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_clk_cfg
+ *
+ * RVU Privileged General Configuration Register
+ */
+union rvu_priv_clk_cfg {
+ u64 u;
+ struct rvu_priv_clk_cfg_s {
+ u64 blk_clken : 1;
+ u64 ncbi_clken : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct rvu_priv_clk_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_CLK_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_CLK_CFG(void)
+{
+ return 0x8000020;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_const
+ *
+ * RVU Privileged Constants Register This register contains constants for
+ * software discovery.
+ */
+union rvu_priv_const {
+ u64 u;
+ struct rvu_priv_const_s {
+ u64 max_msix : 20;
+ u64 hwvfs : 12;
+ u64 pfs : 8;
+ u64 max_vfs_per_pf : 8;
+ u64 reserved_48_63 : 16;
+ } s;
+ /* struct rvu_priv_const_s cn; */
+};
+
+static inline u64 RVU_PRIV_CONST(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_CONST(void)
+{
+ return 0x8000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_gen_cfg
+ *
+ * RVU Privileged General Configuration Register
+ */
+union rvu_priv_gen_cfg {
+ u64 u;
+ struct rvu_priv_gen_cfg_s {
+ u64 lock : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_priv_gen_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_GEN_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_GEN_CFG(void)
+{
+ return 0x8000010;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_cpt#_cfg
+ *
+ * RVU Privileged Hardware VF CPT Configuration Registers Similar to
+ * RVU_PRIV_HWVF()_NIX()_CFG, but for CPT({a}) block.
+ */
+union rvu_priv_hwvfx_cptx_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_cptx_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_hwvfx_cptx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_CPTX_CFG(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_CPTX_CFG(u64 a, u64 b)
+{
+ return 0x8001350 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_int_cfg
+ *
+ * RVU Privileged Hardware VF Interrupt Configuration Registers
+ */
+union rvu_priv_hwvfx_int_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_int_cfg_s {
+ u64 msix_offset : 11;
+ u64 reserved_11 : 1;
+ u64 msix_size : 8;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct rvu_priv_hwvfx_int_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_INT_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_INT_CFG(u64 a)
+{
+ return 0x8001280 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_nix#_cfg
+ *
+ * RVU Privileged Hardware VF NIX Configuration Registers These registers
+ * are used to assist VF software discovery. For each HWVF, if the HWVF
+ * is mapped to a VF by RVU_PRIV_PF()_CFG[FIRST_HWVF,NVF], software
+ * writes NIX block's resource configuration for the VF in this register.
+ * The VF driver can read RVU_VF_BLOCK_ADDR()_DISC to discover the
+ * configuration.
+ */
+union rvu_priv_hwvfx_nixx_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_nixx_cfg_s {
+ u64 has_lf : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_priv_hwvfx_nixx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_NIXX_CFG(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_NIXX_CFG(u64 a, u64 b)
+{
+ return 0x8001300 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_npa_cfg
+ *
+ * RVU Privileged Hardware VF NPA Configuration Registers Similar to
+ * RVU_PRIV_HWVF()_NIX()_CFG, but for NPA block.
+ */
+union rvu_priv_hwvfx_npa_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_npa_cfg_s {
+ u64 has_lf : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_priv_hwvfx_npa_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_NPA_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_NPA_CFG(u64 a)
+{
+ return 0x8001310 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_sso_cfg
+ *
+ * RVU Privileged Hardware VF SSO Configuration Registers Similar to
+ * RVU_PRIV_HWVF()_NIX()_CFG, but for SSO block.
+ */
+union rvu_priv_hwvfx_sso_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_sso_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_hwvfx_sso_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_SSO_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_SSO_CFG(u64 a)
+{
+ return 0x8001320 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_ssow_cfg
+ *
+ * RVU Privileged Hardware VF SSO Work Slot Configuration Registers
+ * Similar to RVU_PRIV_HWVF()_NIX()_CFG, but for SSOW block.
+ */
+union rvu_priv_hwvfx_ssow_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_ssow_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_hwvfx_ssow_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_SSOW_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_SSOW_CFG(u64 a)
+{
+ return 0x8001330 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_tim_cfg
+ *
+ * RVU Privileged Hardware VF SSO Work Slot Configuration Registers
+ * Similar to RVU_PRIV_HWVF()_NIX()_CFG, but for TIM block.
+ */
+union rvu_priv_hwvfx_tim_cfg {
+ u64 u;
+ struct rvu_priv_hwvfx_tim_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_hwvfx_tim_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_TIM_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_TIM_CFG(u64 a)
+{
+ return 0x8001340 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_cfg
+ *
+ * RVU Privileged PF Configuration Registers
+ */
+union rvu_priv_pfx_cfg {
+ u64 u;
+ struct rvu_priv_pfx_cfg_s {
+ u64 first_hwvf : 12;
+ u64 nvf : 8;
+ u64 ena : 1;
+ u64 af_ena : 1;
+ u64 me_flr_ena : 1;
+ u64 pf_vf_io_bar4 : 1;
+ u64 reserved_24_63 : 40;
+ } s;
+ struct rvu_priv_pfx_cfg_cn96xxp1 {
+ u64 first_hwvf : 12;
+ u64 nvf : 8;
+ u64 ena : 1;
+ u64 af_ena : 1;
+ u64 me_flr_ena : 1;
+ u64 reserved_23_63 : 41;
+ } cn96xxp1;
+ /* struct rvu_priv_pfx_cfg_s cn96xxp3; */
+ /* struct rvu_priv_pfx_cfg_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 RVU_PRIV_PFX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_CFG(u64 a)
+{
+ return 0x8000100 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_cpt#_cfg
+ *
+ * RVU Privileged PF CPT Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for CPT({a}) block.
+ */
+union rvu_priv_pfx_cptx_cfg {
+ u64 u;
+ struct rvu_priv_pfx_cptx_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_pfx_cptx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_CPTX_CFG(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_CPTX_CFG(u64 a, u64 b)
+{
+ return 0x8000350 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_id_cfg
+ *
+ * RVU Privileged PF ID Configuration Registers
+ */
+union rvu_priv_pfx_id_cfg {
+ u64 u;
+ struct rvu_priv_pfx_id_cfg_s {
+ u64 pf_devid : 8;
+ u64 vf_devid : 8;
+ u64 class_code : 24;
+ u64 reserved_40_63 : 24;
+ } s;
+ /* struct rvu_priv_pfx_id_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_ID_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_ID_CFG(u64 a)
+{
+ return 0x8000120 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_int_cfg
+ *
+ * RVU Privileged PF Interrupt Configuration Registers
+ */
+union rvu_priv_pfx_int_cfg {
+ u64 u;
+ struct rvu_priv_pfx_int_cfg_s {
+ u64 msix_offset : 11;
+ u64 reserved_11 : 1;
+ u64 msix_size : 8;
+ u64 reserved_20_63 : 44;
+ } s;
+ /* struct rvu_priv_pfx_int_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_INT_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_INT_CFG(u64 a)
+{
+ return 0x8000200 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_msix_cfg
+ *
+ * RVU Privileged PF MSI-X Configuration Registers These registers
+ * specify MSI-X table sizes and locations for RVU PFs and associated
+ * VFs. Hardware maintains all RVU MSI-X tables in a contiguous memory
+ * region in LLC/DRAM called the MSI-X table region. The table region's
+ * base AF IOVA is specified by RVU_AF_MSIXTR_BASE, and its size as a
+ * multiple of 16-byte RVU_MSIX_VEC_S structures must be less than or
+ * equal to RVU_PRIV_CONST[MAX_MSIX]. A PF's MSI-X table consists of the
+ * following range of RVU_MSIX_VEC_S structures in the table region: *
+ * First index: [PF_MSIXT_OFFSET]. * Last index: [PF_MSIXT_OFFSET] +
+ * [PF_MSIXT_SIZEM1]. If a PF has enabled VFs (associated
+ * RVU_PRIV_PF()_CFG[NVF] is nonzero), then each VF's MSI-X table
+ * consumes the following range of RVU_MSIX_VEC_S structures: * First
+ * index: [VF_MSIXT_OFFSET] + N*([VF_MSIXT_SIZEM1] + 1). * Last index:
+ * [VF_MSIXT_OFFSET] + N*([VF_MSIXT_SIZEM1] + 1) + [VF_MSIXT_SIZEM1].
+ * N=0 for the first VF, N=1 for the second VF, etc. Different PFs and
+ * VFs must have non-overlapping vector ranges, and the last index of any
+ * range must be less than RVU_PRIV_CONST[MAX_MSIX].
+ */
+union rvu_priv_pfx_msix_cfg {
+ u64 u;
+ struct rvu_priv_pfx_msix_cfg_s {
+ u64 vf_msixt_sizem1 : 12;
+ u64 vf_msixt_offset : 20;
+ u64 pf_msixt_sizem1 : 12;
+ u64 pf_msixt_offset : 20;
+ } s;
+ /* struct rvu_priv_pfx_msix_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_MSIX_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_MSIX_CFG(u64 a)
+{
+ return 0x8000110 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_nix#_cfg
+ *
+ * RVU Privileged PF NIX Configuration Registers These registers are used
+ * to assist PF software discovery. For each enabled RVU PF, software
+ * writes the block's resource configuration for the PF in this register.
+ * The PF driver can read RVU_PF_BLOCK_ADDR()_DISC to discover the
+ * configuration.
+ */
+union rvu_priv_pfx_nixx_cfg {
+ u64 u;
+ struct rvu_priv_pfx_nixx_cfg_s {
+ u64 has_lf : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_priv_pfx_nixx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_NIXX_CFG(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_NIXX_CFG(u64 a, u64 b)
+{
+ return 0x8000300 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_npa_cfg
+ *
+ * RVU Privileged PF NPA Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for NPA block.
+ */
+union rvu_priv_pfx_npa_cfg {
+ u64 u;
+ struct rvu_priv_pfx_npa_cfg_s {
+ u64 has_lf : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_priv_pfx_npa_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_NPA_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_NPA_CFG(u64 a)
+{
+ return 0x8000310 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_sso_cfg
+ *
+ * RVU Privileged PF SSO Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for SSO block.
+ */
+union rvu_priv_pfx_sso_cfg {
+ u64 u;
+ struct rvu_priv_pfx_sso_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_pfx_sso_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_SSO_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_SSO_CFG(u64 a)
+{
+ return 0x8000320 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_ssow_cfg
+ *
+ * RVU Privileged PF SSO Work Slot Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for SSOW block.
+ */
+union rvu_priv_pfx_ssow_cfg {
+ u64 u;
+ struct rvu_priv_pfx_ssow_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_pfx_ssow_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_SSOW_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_SSOW_CFG(u64 a)
+{
+ return 0x8000330 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_tim_cfg
+ *
+ * RVU Privileged PF SSO Work Slot Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for TIM block.
+ */
+union rvu_priv_pfx_tim_cfg {
+ u64 u;
+ struct rvu_priv_pfx_tim_cfg_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_63 : 55;
+ } s;
+ /* struct rvu_priv_pfx_tim_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_TIM_CFG(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_TIM_CFG(u64 a)
+{
+ return 0x8000340 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_block_addr#_disc
+ *
+ * RVU VF Block Address Discovery Registers These registers allow each VF
+ * driver to discover block resources that are provisioned to its VF. The
+ * register's BLOCK_ADDR index is enumerated by RVU_BLOCK_ADDR_E.
+ */
+union rvu_vf_block_addrx_disc {
+ u64 u;
+ struct rvu_vf_block_addrx_disc_s {
+ u64 num_lfs : 9;
+ u64 reserved_9_10 : 2;
+ u64 imp : 1;
+ u64 rid : 8;
+ u64 btype : 8;
+ u64 reserved_28_63 : 36;
+ } s;
+ /* struct rvu_vf_block_addrx_disc_s cn; */
+};
+
+static inline u64 RVU_VF_BLOCK_ADDRX_DISC(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_BLOCK_ADDRX_DISC(u64 a)
+{
+ return 0x200 + 8 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int
+ *
+ * RVU VF Interrupt Registers
+ */
+union rvu_vf_int {
+ u64 u;
+ struct rvu_vf_int_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_vf_int_s cn; */
+};
+
+static inline u64 RVU_VF_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT(void)
+{
+ return 0x20;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int_ena_w1c
+ *
+ * RVU VF Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union rvu_vf_int_ena_w1c {
+ u64 u;
+ struct rvu_vf_int_ena_w1c_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_vf_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_VF_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT_ENA_W1C(void)
+{
+ return 0x38;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int_ena_w1s
+ *
+ * RVU VF Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union rvu_vf_int_ena_w1s {
+ u64 u;
+ struct rvu_vf_int_ena_w1s_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_vf_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_VF_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT_ENA_W1S(void)
+{
+ return 0x30;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int_w1s
+ *
+ * RVU VF Interrupt Set Register This register sets interrupt bits.
+ */
+union rvu_vf_int_w1s {
+ u64 u;
+ struct rvu_vf_int_w1s_s {
+ u64 mbox : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct rvu_vf_int_w1s_s cn; */
+};
+
+static inline u64 RVU_VF_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT_W1S(void)
+{
+ return 0x28;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_msix_pba#
+ *
+ * RVU VF MSI-X Pending-Bit-Array Registers This register is the MSI-X VF
+ * PBA table.
+ */
+union rvu_vf_msix_pbax {
+ u64 u;
+ struct rvu_vf_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct rvu_vf_msix_pbax_s cn; */
+};
+
+static inline u64 RVU_VF_MSIX_PBAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_MSIX_PBAX(u64 a)
+{
+ return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_msix_vec#_addr
+ *
+ * RVU VF MSI-X Vector-Table Address Registers These registers and
+ * RVU_VF_MSIX_VEC()_CTL form the VF MSI-X vector table. The number of
+ * MSI-X vectors for a given VF is specified by
+ * RVU_PRIV_PF()_MSIX_CFG[VF_MSIXT_SIZEM1] (plus 1). Software must do a
+ * read after any writes to the MSI-X vector table to ensure that the
+ * writes have completed before interrupts are generated to the modified
+ * vectors.
+ */
+union rvu_vf_msix_vecx_addr {
+ u64 u;
+ struct rvu_vf_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 51;
+ u64 reserved_53_63 : 11;
+ } s;
+ /* struct rvu_vf_msix_vecx_addr_s cn; */
+};
+
+static inline u64 RVU_VF_MSIX_VECX_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_MSIX_VECX_ADDR(u64 a)
+{
+ return 0x80000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_msix_vec#_ctl
+ *
+ * RVU VF MSI-X Vector-Table Control and Data Registers These registers
+ * and RVU_VF_MSIX_VEC()_ADDR form the VF MSI-X vector table.
+ */
+union rvu_vf_msix_vecx_ctl {
+ u64 u;
+ struct rvu_vf_msix_vecx_ctl_s {
+ u64 data : 32;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct rvu_vf_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 RVU_VF_MSIX_VECX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_MSIX_VECX_CTL(u64 a)
+{
+ return 0x80008 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_vfpf_mbox#
+ *
+ * RVU VF/PF Mailbox Registers
+ */
+union rvu_vf_vfpf_mboxx {
+ u64 u;
+ struct rvu_vf_vfpf_mboxx_s {
+ u64 data : 64;
+ } s;
+ /* struct rvu_vf_vfpf_mboxx_s cn; */
+};
+
+static inline u64 RVU_VF_VFPF_MBOXX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_VFPF_MBOXX(u64 a)
+{
+ return 0 + 8 * a;
+}
+
+#endif /* __CSRS_RVU_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_ID_H__
+#define __SMC_ID_H__
+
+/* SMC function IDs for general purpose queries */
+
+#define OCTEONTX2_SVC_CALL_COUNT 0xc200ff00
+#define OCTEONTX2_SVC_UID 0xc200ff01
+
+#define OCTEONTX2_SVC_VERSION 0xc200ff03
+
+/* OcteonTX Service Calls version numbers */
+#define OCTEONTX2_VERSION_MAJOR 0x1
+#define OCTEONTX2_VERSION_MINOR 0x0
+
+/* x1 - node number */
+#define OCTEONTX2_DRAM_SIZE 0xc2000301
+#define OCTEONTX2_NODE_COUNT 0xc2000601
+#define OCTEONTX2_DISABLE_RVU_LFS 0xc2000b01
+
+#define OCTEONTX2_CONFIG_OOO 0xc2000b04
+
+/* fail safe */
+#define OCTEONTX2_FSAFE_PR_BOOT_SUCCESS 0xc2000b02
+
+#endif /* __SMC_ID_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_H__
+#define __SMC_H__
+
+#include <asm/arch/smc-id.h>
+
+ssize_t smc_configure_ooo(unsigned int val);
+ssize_t smc_dram_size(unsigned int node);
+ssize_t smc_disable_rvu_lfs(unsigned int node);
+ssize_t smc_flsf_fw_booted(void);
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SOC_H__
+#define __SOC_H__
+
+/* Product PARTNUM */
+#define CN81XX 0xA2
+#define CN83XX 0xA3
+#define CN96XX 0xB2
+#define CN95XX 0xB3
+
+/* Register defines */
+
+#define otx_is_soc(soc) (read_partnum() == (soc))
+#define otx_is_board(model) (!strcmp(read_board_name(), model))
+#define otx_is_platform(platform) (read_platform() == (platform))
+
+enum platform_t {
+ PLATFORM_HW = 0,
+ PLATFORM_EMULATOR = 1,
+ PLATFORM_ASIM = 3,
+};
+
+int read_platform(void);
+u8 read_partnum(void);
+const char *read_board_name(void);
+
+#endif /* __SOC_H */
!defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \
!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \
!defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \
- !defined(CONFIG_TARGET_BCMNS3)
+ !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE)
#include <asm/arch/gpio.h>
#endif
#include <asm-generic/gpio.h>
#define in_le32(a) in_arch(l,le32,a)
#define in_le16(a) in_arch(w,le16,a)
+#define out_be64(a,v) out_arch(l,be64,a,v)
#define out_be32(a,v) out_arch(l,be32,a,v)
#define out_be16(a,v) out_arch(w,be16,a,v)
+#define in_be64(a) in_arch(l,be64,a)
#define in_be32(a) in_arch(l,be32,a)
#define in_be16(a) in_arch(w,be16,a)
+#define out_64(a,v) __raw_writeq(v,a)
#define out_32(a,v) __raw_writel(v,a)
#define out_16(a,v) __raw_writew(v,a)
#define out_8(a,v) __raw_writeb(v,a)
+#define in_64(a) __raw_readq(a)
#define in_32(a) __raw_readl(a)
#define in_16(a) __raw_readw(a)
#define in_8(a) __raw_readb(a)
#define setbits_8(addr, set) setbits(8, addr, set)
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+#define clrbits_be64(addr, clear) clrbits(be64, addr, clear)
+#define setbits_be64(addr, set) setbits(be64, addr, set)
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+
+#define clrbits_le64(addr, clear) clrbits(le64, addr, clear)
+#define setbits_le64(addr, set) setbits(le64, addr, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+
+#define clrbits_64(addr, clear) clrbits(64, addr, clear)
+#define setbits_64(addr, set) setbits(64, addr, set)
+#define clrsetbits_64(addr, clear, set) clrsetbits(64, addr, clear, set)
+
/*
* Now, pick up the machine-defined IO definitions
*/
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
#endif /* CONFIG_CMD_NET */
--- /dev/null
+if ARCH_OCTEONTX
+
+choice
+ prompt "OcteonTX board select"
+ optional
+
+config TARGET_OCTEONTX_81XX
+ bool "Marvell OcteonTX CN81XX"
+
+config TARGET_OCTEONTX_83XX
+ bool "Marvell OcteonTX CN83XX"
+
+endchoice
+
+config SYS_SOC
+ string
+ default "octeontx"
+
+config SYS_PCI_64BIT
+ bool
+ default y
+
+endif
--- /dev/null
+#/* SPDX-License-Identifier: GPL-2.0
+# *
+# * Copyright (C) 2018 Marvell International Ltd.
+# *
+# * https://spdx.org/licenses
+# */
+
+obj-y += lowlevel_init.o clock.o cpu.o
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/clock.h>
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void)
+{
+ union rst_boot rst_boot;
+
+ rst_boot.u = readq(RST_BOOT);
+
+ return rst_boot.s.pnr_mul * PLL_REF_CLK;
+}
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void)
+{
+ union rst_boot rst_boot;
+
+ rst_boot.u = readq(RST_BOOT);
+
+ return rst_boot.s.c_mul * PLL_REF_CLK;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OTX_MEM_MAP_USED 3
+
+/* 1 for 83xx, +1 is end of list which needs to be empty */
+#define OTX_MEM_MAP_MAX (OTX_MEM_MAP_USED + 1 + CONFIG_NR_DRAM_BANKS + 1)
+
+static struct mm_region otx_mem_map[OTX_MEM_MAP_MAX] = {
+ {
+ .virt = 0x800000000000UL,
+ .phys = 0x800000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }, {
+ .virt = 0x840000000000UL,
+ .phys = 0x840000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }, {
+ .virt = 0x880000000000UL,
+ .phys = 0x880000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }
+
+};
+
+struct mm_region *mem_map = otx_mem_map;
+
+void mem_map_fill(void)
+{
+ int banks = OTX_MEM_MAP_USED;
+ u32 dram_start = CONFIG_SYS_TEXT_BASE;
+
+ if (otx_is_soc(CN83XX)) {
+ otx_mem_map[banks].virt = 0x8c0000000000UL;
+ otx_mem_map[banks].phys = 0x8c0000000000UL;
+ otx_mem_map[banks].size = 0x40000000000UL;
+ otx_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE;
+ banks = banks + 1;
+ }
+
+ for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ otx_mem_map[banks].virt = dram_start;
+ otx_mem_map[banks].phys = dram_start;
+ otx_mem_map[banks].size = gd->ram_size;
+ otx_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_NON_SHARE;
+ banks = banks + 1;
+ }
+}
+
+u64 get_page_table_size(void)
+{
+ return 0x80000;
+}
+
+void reset_cpu(ulong addr)
+{
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+.align 8
+.global fdt_base_addr
+fdt_base_addr:
+ .dword 0x0
+
+.global save_boot_params
+save_boot_params:
+ /* Read FDT base from x1 register passed by ATF */
+ adr x21, fdt_base_addr
+ str x1, [x21]
+
+ /* Returns */
+ b save_boot_params_ret
+
+ENTRY(lowlevel_init)
+ mov x29, lr /* Save LR */
+
+ /* any lowlevel init should go here */
+
+ mov lr, x29 /* Restore LR */
+ ret
+ENDPROC(lowlevel_init)
--- /dev/null
+if ARCH_OCTEONTX2
+
+choice
+ prompt "OcteonTX2 board select"
+ optional
+
+config TARGET_OCTEONTX2_95XX
+ bool "Marvell OcteonTX2 CN95XX"
+
+config TARGET_OCTEONTX2_96XX
+ bool "Marvell OcteonTX2 CN96XX"
+
+endchoice
+
+config SYS_SOC
+ string
+ default "octeontx2"
+
+config SYS_PCI_64BIT
+ bool
+ default y
+
+endif
--- /dev/null
+#/*
+# * Copyright (C) 2018 Marvell International Ltd.
+# *
+# * SPDX-License-Identifier: GPL-2.0
+# * https://spdx.org/licenses
+# */
+
+obj-y += lowlevel_init.o clock.o cpu.o
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/clock.h>
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void)
+{
+ union rst_boot rst_boot;
+
+ rst_boot.u = readq(RST_BOOT);
+
+ return rst_boot.s.pnr_mul * PLL_REF_CLK;
+}
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void)
+{
+ union rst_boot rst_boot;
+
+ rst_boot.u = readq(RST_BOOT);
+
+ return rst_boot.s.c_mul * PLL_REF_CLK;
+}
--- /dev/null
+ifeq ($(CONFIG_ARCH_OCTEONTX2),y)
+PLATFORM_CPPFLAGS += $(call cc-option,-march=armv8.2-a,)
+PLATFORM_CPPFLAGS += $(call cc-option,-mtune=octeontx2,)
+endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OTX2_MEM_MAP_USED 4
+
+/* +1 is end of list which needs to be empty */
+#define OTX2_MEM_MAP_MAX (OTX2_MEM_MAP_USED + CONFIG_NR_DRAM_BANKS + 1)
+
+static struct mm_region otx2_mem_map[OTX2_MEM_MAP_MAX] = {
+ {
+ .virt = 0x800000000000UL,
+ .phys = 0x800000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }, {
+ .virt = 0x840000000000UL,
+ .phys = 0x840000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }, {
+ .virt = 0x880000000000UL,
+ .phys = 0x880000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }, {
+ .virt = 0x8c0000000000UL,
+ .phys = 0x8c0000000000UL,
+ .size = 0x40000000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }
+};
+
+struct mm_region *mem_map = otx2_mem_map;
+
+void mem_map_fill(void)
+{
+ int banks = OTX2_MEM_MAP_USED;
+ u32 dram_start = CONFIG_SYS_TEXT_BASE;
+
+ for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ otx2_mem_map[banks].virt = dram_start;
+ otx2_mem_map[banks].phys = dram_start;
+ otx2_mem_map[banks].size = gd->ram_size;
+ otx2_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_NON_SHARE;
+ banks = banks + 1;
+ }
+}
+
+u64 get_page_table_size(void)
+{
+ return 0x80000;
+}
+
+void reset_cpu(ulong addr)
+{
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+.align 8
+.global fdt_base_addr
+fdt_base_addr:
+ .dword 0x0
+
+.global save_boot_params
+save_boot_params:
+ /* Read FDT base from x1 register passed by ATF */
+ adr x21, fdt_base_addr
+ str x1, [x21]
+
+ /* Returns */
+ b save_boot_params_ret
+
+ENTRY(lowlevel_init)
+ mov x29, lr /* Save LR */
+
+ /* any lowlevel init should go here */
+
+ mov lr, x29 /* Restore LR */
+ ret
+ENDPROC(lowlevel_init)
#include <dm.h>
#include <hang.h>
#include <init.h>
+#include <led.h>
#include <log.h>
#include <syscon.h>
#include <asm/io.h>
}
#ifdef CONFIG_SPL_BUILD
+DECLARE_GLOBAL_DATA_PTR;
static int setup_led(void)
{
#ifdef CONFIG_SPL_LED
debug("%s: get=%d\n", __func__, ret);
return ret;
}
- ret = led_set_on(dev, 1);
+ ret = led_set_state(dev, LEDST_ON);
if (ret)
return ret;
#endif
endif
obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
-obj-y += pinctrl-glue.o
obj-$(CONFIG_MMC) += mmc-first-dev.o
obj-y += fdt-fixup.o
#include <init.h>
#include <spl.h>
#include <linux/libfdt.h>
-#include <nand.h>
#include <stdio.h>
-#include <linux/io.h>
#include <linux/printk.h>
#include "init.h"
static void uniphier_set_env_addr(const char *env, const char *offset_env)
{
+ DECLARE_GLOBAL_DATA_PTR;
unsigned long offset = 0;
const char *str;
char *end;
unsigned int uniphier_boot_device_raw(void);
int uniphier_have_internal_stm(void);
int uniphier_boot_from_backend(void);
-int uniphier_pin_init(const char *pinconfig_name);
#ifdef CONFIG_ARM64
void uniphier_mem_map_init(unsigned long dram_base, unsigned long dram_size);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- */
-
-#include <linux/errno.h>
-#include <dm.h>
-#include <dm/pinctrl.h>
-
-#include "init.h"
-
-int uniphier_pin_init(const char *pinconfig_name)
-{
- struct udevice *pctldev, *config;
- int ret;
-
- ret = uclass_first_device(UCLASS_PINCTRL, &pctldev);
- if (ret)
- return ret;
-
- device_foreach_child(config, pctldev) {
- if (strcmp(config->name, pinconfig_name))
- continue;
-
- return pinctrl_generic_set_state(pctldev, config);
- }
-
- return -ENODEV;
-}
#ifndef UNIPHIER_SG_REGS_H
#define UNIPHIER_SG_REGS_H
+#include <linux/bitops.h>
+
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#ifdef CONFIG_ARCH_UNIPHIER_V8_MULTI
/* Revision */
#define SG_REVISION 0x0000
+#define SG_REVISION_TYPE_MASK GENMASK(23, 16)
+#define SG_REVISION_MODEL_MASK GENMASK(10, 8)
+#define SG_REVISION_REV_MASK GENMASK(4, 0)
/* Memory Configuration */
#define SG_MEMCONF 0x0400
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
+#include <linux/bitfield.h>
#include <linux/io.h>
#include <linux/types.h>
#include "sg-regs.h"
#include "soc-info.h"
-static unsigned int __uniphier_get_revision_field(unsigned int mask,
- unsigned int shift)
-{
- u32 revision = readl(sg_base + SG_REVISION);
-
- return (revision >> shift) & mask;
-}
-
unsigned int uniphier_get_soc_id(void)
{
- return __uniphier_get_revision_field(0xff, 16);
+ u32 rev = readl(sg_base + SG_REVISION);
+
+ return FIELD_GET(SG_REVISION_TYPE_MASK, rev);
}
unsigned int uniphier_get_soc_model(void)
{
- return __uniphier_get_revision_field(0x7, 8);
+ u32 rev = readl(sg_base + SG_REVISION);
+
+ return FIELD_GET(SG_REVISION_MODEL_MASK, rev);
}
unsigned int uniphier_get_soc_revision(void)
{
- return __uniphier_get_revision_field(0x1f, 0);
+ u32 rev = readl(sg_base + SG_REVISION);
+
+ return FIELD_GET(SG_REVISION_REV_MASK, rev);
}
TCM_SPLIT,
};
-#define PAYLOAD_ARG_CNT 4U
-
void tcm_init(u8 mode);
void mem_map_fill(void);
#ifndef _ASM_ARCH_SYS_PROTO_H
#define _ASM_ARCH_SYS_PROTO_H
-#define PAYLOAD_ARG_CNT 5
-
#define ZYNQMP_CSU_SILICON_VER_MASK 0xF
#define KEY_PTR_LEN 32
void initialize_tcm(bool mode);
void mem_map_fill(void);
-int chip_id(unsigned char id);
#if defined(CONFIG_SYS_MEM_RSVD_FOR_MMU) || defined(CONFIG_DEFINE_TCM_OCM_MMAP)
void tcm_init(u8 mode);
#endif
if (node < 0)
return node;
- base = fdtdec_get_addr(blob, node, "reg");
+ base = fdtdec_get_addr_size_auto_parent(blob, 0, node, "reg", 0,
+ NULL, false);
if (base == FDT_ADDR_T_NONE)
return FDT_ADDR_T_NONE;
unsigned long asid);
#endif
void sbi_set_timer(uint64_t stime_value);
+long sbi_get_spec_version(void);
+int sbi_get_impl_id(void);
int sbi_probe_extension(int ext);
#endif
}
/**
+ * sbi_get_spec_version() - get current SBI specification version
+ *
+ * Return: version id
+ */
+long sbi_get_spec_version(void)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_GET_SPEC_VERSION,
+ 0, 0, 0, 0, 0, 0);
+ if (!ret.error)
+ if (ret.value)
+ return ret.value;
+
+ return -ENOTSUPP;
+}
+
+/**
+ * sbi_get_impl_id() - get SBI implementation ID
+ *
+ * Return: implementation ID
+ */
+int sbi_get_impl_id(void)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_GET_IMP_ID,
+ 0, 0, 0, 0, 0, 0);
+ if (!ret.error)
+ if (ret.value)
+ return ret.value;
+
+ return -ENOTSUPP;
+}
+
+/**
* sbi_probe_extension() - Check if an SBI extension ID is supported or not.
* @extid: The extension ID to be probed.
*
{
typedef void __noreturn (*image_entry_riscv_t)(ulong hart, void *dtb);
void *fdt_blob;
- int ret;
+ __maybe_unused int ret;
#if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL)
fdt_blob = spl_image->fdt_addr;
__u_boot_sandbox_option_start = .;
_u_boot_sandbox_getopt : { KEEP(*(.u_boot_sandbox_getopt)) }
__u_boot_sandbox_option_end = .;
-
- __bss_start = .;
}
INSERT AFTER .data;
{
*(.__efi_runtime_rel_stop)
}
-
- __bss_start = .;
}
INSERT BEFORE .data;
};
bind-test {
+ compatible = "simple-bus";
bind-test-child1 {
compatible = "sandbox,phy";
#phy-cells = <1>;
reg = <0x2c>;
compatible = "i2c-eeprom";
sandbox,emul = <&emul_eeprom>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bootcount_i2c: bootcount@10 {
+ reg = <10 2>;
+ };
+ };
};
rtc_0: rtc@43 {
offset = <0x13>;
};
+ bootcount {
+ compatible = "u-boot,bootcount-i2c-eeprom";
+ i2c-eeprom = <&bootcount_i2c>;
+ };
+
adc@0 {
compatible = "sandbox,adc";
vdd-supply = <&buck2>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000
- 0x01000000 0 0x40000000 0x40000000 0 0x2000>;
+ ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000 // MEM0
+ 0x02000000 0 0x31000000 0x31000000 0 0x2000 // MEM1
+ 0x01000000 0 0x40000000 0x40000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678
0x0c 0x00 0x1234 0x5678
0x10 0x00 0x1234 0x5678>;
--- /dev/null
+if TARGET_OCTEONTX_81XX || TARGET_OCTEONTX_83XX
+
+config SYS_VENDOR
+ string
+ default "Marvell"
+
+config SYS_BOARD
+ string
+ default "octeontx"
+
+config SYS_CONFIG_NAME
+ default "octeontx_common"
+
+endif
--- /dev/null
+OCTEONTX BOARD
+M: Aaron Williams <awilliams@marvell.com>
+S: Maintained
+F: board/Marvell/octeontx/
+F: include/configs/octeontx_81xx.h
+F: include/configs/octeontx_83xx.h
+F: configs/octeontx_81xx_defconfig
+F: configs/octeontx_83xx_defconfig
--- /dev/null
+#/*
+# * Copyright (C) 2018 Marvell International Ltd.
+# *
+# * SPDX-License-Identifier: GPL-2.0
+# * https://spdx.org/licenses
+# */
+
+obj-y := board.o smc.o soc-utils.o
+obj-$(CONFIG_OF_LIBFDT) += board-fdt.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <errno.h>
+#include <env.h>
+#include <log.h>
+#include <net.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <linux/libfdt.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <asm/arch/board.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int fdt_get_mdio_bus(const void *fdt, int phy_offset)
+{
+ int node, bus = -1;
+ const u64 *reg;
+ u64 addr;
+
+ if (phy_offset < 0)
+ return -1;
+ /* obtain mdio node and get the reg prop */
+ node = fdt_parent_offset(fdt, phy_offset);
+ if (node < 0)
+ return -1;
+
+ reg = fdt_getprop(fdt, node, "reg", NULL);
+ addr = fdt64_to_cpu(*reg);
+ bus = (addr & (1 << 7)) ? 1 : 0;
+ return bus;
+}
+
+static int fdt_get_phy_addr(const void *fdt, int phy_offset)
+{
+ const u32 *reg;
+ int addr = -1;
+
+ if (phy_offset < 0)
+ return -1;
+ reg = fdt_getprop(fdt, phy_offset, "reg", NULL);
+ addr = fdt32_to_cpu(*reg);
+ return addr;
+}
+
+void fdt_parse_phy_info(void)
+{
+ const void *fdt = gd->fdt_blob;
+ int offset = 0, node, bgx_id = 0, lmacid = 0;
+ const u32 *val;
+ char bgxname[24];
+ int len, rgx_id = 0, eth_id = 0;
+ int phandle, phy_offset;
+ int subnode, i;
+ int bdknode;
+
+ bdknode = fdt_path_offset(fdt, "/cavium,bdk");
+ if (bdknode < 0) {
+ printf("%s: bdk node is missing from device tree: %s\n",
+ __func__, fdt_strerror(bdknode));
+ }
+
+ offset = fdt_node_offset_by_compatible(fdt, -1, "pci-bridge");
+ if (offset < 1)
+ return;
+
+ for (bgx_id = 0; bgx_id < MAX_BGX_PER_NODE; bgx_id++) {
+ int phy_addr[LMAC_CNT] = {[0 ... LMAC_CNT - 1] = -1};
+ bool autoneg_dis[LMAC_CNT] = {[0 ... LMAC_CNT - 1] = 0};
+ int mdio_bus[LMAC_CNT] = {[0 ... LMAC_CNT - 1] = -1};
+ bool lmac_reg[LMAC_CNT] = {[0 ... LMAC_CNT - 1] = 0};
+ bool lmac_enable[LMAC_CNT] = {[0 ... LMAC_CNT - 1] = 0};
+
+ snprintf(bgxname, sizeof(bgxname), "bgx%d", bgx_id);
+ node = fdt_subnode_offset(fdt, offset, bgxname);
+ if (node < 0) {
+ /* check if it is rgx node */
+ snprintf(bgxname, sizeof(bgxname), "rgx%d", rgx_id);
+ node = fdt_subnode_offset(fdt, offset, bgxname);
+ if (node < 0) {
+ debug("bgx%d/rgx0 node not found\n", bgx_id);
+ return;
+ }
+ }
+ debug("bgx%d node found\n", bgx_id);
+
+ /*
+ * loop through each of the bgx/rgx nodes
+ * to find PHY nodes
+ */
+ fdt_for_each_subnode(subnode, fdt, node) {
+ /* Check for reg property */
+ val = fdt_getprop(fdt, subnode, "reg", &len);
+ if (val) {
+ debug("lmacid = %d\n", lmacid);
+ lmac_reg[lmacid] = 1;
+ }
+ /* check for phy-handle property */
+ val = fdt_getprop(fdt, subnode, "phy-handle", &len);
+ if (val) {
+ phandle = fdt32_to_cpu(*val);
+ if (!phandle) {
+ debug("phandle not valid %d\n", lmacid);
+ } else {
+ phy_offset = fdt_node_offset_by_phandle
+ (fdt, phandle);
+ phy_addr[lmacid] = fdt_get_phy_addr
+ (fdt, phy_offset);
+ mdio_bus[lmacid] = fdt_get_mdio_bus
+ (fdt, phy_offset);
+ }
+ } else {
+ debug("phy-handle prop not found %d\n",
+ lmacid);
+ }
+ /* check for autonegotiation property */
+ val = fdt_getprop(fdt, subnode,
+ "cavium,disable-autonegotiation",
+ &len);
+ if (val)
+ autoneg_dis[lmacid] = 1;
+
+ eth_id++;
+ lmacid++;
+ }
+
+ for (i = 0; i < MAX_LMAC_PER_BGX; i++) {
+ const char *str;
+
+ snprintf(bgxname, sizeof(bgxname),
+ "BGX-ENABLE.N0.BGX%d.P%d", bgx_id, i);
+ if (bdknode >= 0) {
+ str = fdt_getprop(fdt, bdknode,
+ bgxname, &len);
+ if (str)
+ lmac_enable[i] =
+ simple_strtol(str, NULL,
+ 10);
+ }
+ }
+
+ lmacid = 0;
+ bgx_set_board_info(bgx_id, mdio_bus, phy_addr,
+ autoneg_dis, lmac_reg, lmac_enable);
+ }
+}
+
+static int fdt_get_bdk_node(void)
+{
+ int node, ret;
+ const void *fdt = gd->fdt_blob;
+
+ if (!fdt) {
+ printf("ERROR: %s: no valid device tree found\n", __func__);
+ return 0;
+ }
+
+ ret = fdt_check_header(fdt);
+ if (ret < 0) {
+ printf("fdt: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ node = fdt_path_offset(fdt, "/cavium,bdk");
+ if (node < 0) {
+ printf("%s: /cavium,bdk is missing from device tree: %s\n",
+ __func__, fdt_strerror(node));
+ return 0;
+ }
+ return node;
+}
+
+const char *fdt_get_board_serial(void)
+{
+ const void *fdt = gd->fdt_blob;
+ int node, len = 64;
+ const char *str = NULL;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return NULL;
+
+ str = fdt_getprop(fdt, node, "BOARD-SERIAL", &len);
+ if (!str)
+ printf("Error: cannot retrieve board serial from fdt\n");
+ return str;
+}
+
+const char *fdt_get_board_revision(void)
+{
+ const void *fdt = gd->fdt_blob;
+ int node, len = 64;
+ const char *str = NULL;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return NULL;
+
+ str = fdt_getprop(fdt, node, "BOARD-REVISION", &len);
+ if (!str)
+ printf("Error: cannot retrieve board revision from fdt\n");
+ return str;
+}
+
+const char *fdt_get_board_model(void)
+{
+ const void *fdt = gd->fdt_blob;
+ int node, len = 16;
+ const char *str = NULL;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return NULL;
+
+ str = fdt_getprop(fdt, node, "BOARD-MODEL", &len);
+ if (!str)
+ printf("Error: cannot retrieve board model from fdt\n");
+ return str;
+}
+
+void fdt_board_get_ethaddr(int bgx, int lmac, unsigned char *eth)
+{
+ const void *fdt = gd->fdt_blob;
+ const char *mac = NULL;
+ int offset = 0, node, len;
+ int subnode, i = 0;
+ char bgxname[24];
+
+ offset = fdt_node_offset_by_compatible(fdt, -1, "pci-bridge");
+ if (offset < 0) {
+ printf("%s couldn't find mrml bridge node in fdt\n",
+ __func__);
+ return;
+ }
+ if (bgx == 2 && otx_is_soc(CN81XX)) {
+ snprintf(bgxname, sizeof(bgxname), "rgx%d", 0);
+ lmac = 0;
+ } else {
+ snprintf(bgxname, sizeof(bgxname), "bgx%d", bgx);
+ }
+
+ node = fdt_subnode_offset(fdt, offset, bgxname);
+
+ fdt_for_each_subnode(subnode, fdt, node) {
+ if (i++ != lmac)
+ continue;
+ /* check for local-mac-address */
+ mac = fdt_getprop(fdt, subnode, "local-mac-address", &len);
+ if (mac) {
+ debug("%s mac %pM\n", __func__, mac);
+ memcpy(eth, mac, ARP_HLEN);
+ } else {
+ memset(eth, 0, ARP_HLEN);
+ }
+ debug("%s eth %pM\n", __func__, eth);
+ return;
+ }
+}
+
+int arch_fixup_memory_node(void *blob)
+{
+ return 0;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* remove "cavium, bdk" node from DT */
+ int ret = 0, offset;
+
+ ret = fdt_check_header(blob);
+ if (ret < 0) {
+ printf("ERROR: %s\n", fdt_strerror(ret));
+ return ret;
+ }
+
+ if (blob) {
+ offset = fdt_path_offset(blob, "/cavium,bdk");
+ if (offset < 0) {
+ printf("ERROR: FDT BDK node not found\n");
+ return offset;
+ }
+
+ /* delete node */
+ ret = fdt_del_node(blob, offset);
+ if (ret < 0) {
+ printf("WARNING : could not remove bdk node\n");
+ return ret;
+ }
+
+ debug("%s deleted bdk node\n", __func__);
+ }
+
+ return 0;
+}
+
+/**
+ * Return the FDT base address that was passed by ATF
+ *
+ * @return FDT base address received from ATF in x1 register
+ */
+void *board_fdt_blob_setup(void)
+{
+ return (void *)fdt_base_addr;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <dm.h>
+#include <malloc.h>
+#include <errno.h>
+#include <env.h>
+#include <init.h>
+#include <log.h>
+#include <netdev.h>
+#include <pci_ids.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <asm/arch/smc.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/board.h>
+#include <dm/util.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void octeontx_cleanup_ethaddr(void)
+{
+ char ename[32];
+
+ for (int i = 0; i < 20; i++) {
+ sprintf(ename, i ? "eth%daddr" : "ethaddr", i);
+ if (env_get(ename))
+ env_set(ename, NULL);
+ }
+}
+
+int octeontx_board_has_pmp(void)
+{
+ return (otx_is_board("sff8104") || otx_is_board("nas8104"));
+}
+
+int board_early_init_r(void)
+{
+ pci_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ if (IS_ENABLED(CONFIG_NET_OCTEONTX))
+ fdt_parse_phy_info();
+
+ return 0;
+}
+
+int timer_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = smc_dram_size(0);
+ gd->ram_size -= CONFIG_SYS_SDRAM_BASE;
+ mem_map_fill();
+
+ return 0;
+}
+
+void board_late_probe_devices(void)
+{
+ struct udevice *dev;
+ int err, bgx_cnt, i;
+
+ /* Probe MAC(BGX) and NIC PF devices before Network stack init */
+ bgx_cnt = otx_is_soc(CN81XX) ? 2 : 4;
+ for (i = 0; i < bgx_cnt; i++) {
+ err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVICE_ID_CAVIUM_BGX, i, &dev);
+ if (err)
+ debug("%s BGX%d device not found\n", __func__, i);
+ }
+ if (otx_is_soc(CN81XX)) {
+ err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVICE_ID_CAVIUM_RGX, 0, &dev);
+ if (err)
+ debug("%s RGX device not found\n", __func__);
+ }
+ err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVICE_ID_CAVIUM_NIC, 0, &dev);
+ if (err)
+ debug("NIC PF device not found\n");
+}
+
+/**
+ * Board late initialization routine.
+ */
+int board_late_init(void)
+{
+ char boardname[32];
+ char boardserial[150], boardrev[150];
+ bool save_env = false;
+ const char *str;
+
+ /*
+ * Try to cleanup ethaddr env variables, this is needed
+ * as with each boot, configuration of network interfaces can change.
+ */
+ octeontx_cleanup_ethaddr();
+
+ snprintf(boardname, sizeof(boardname), "%s> ", fdt_get_board_model());
+ env_set("prompt", boardname);
+
+ set_working_fdt_addr(env_get_hex("fdtcontroladdr", fdt_base_addr));
+
+ str = fdt_get_board_revision();
+ if (str) {
+ snprintf(boardrev, sizeof(boardrev), "%s", str);
+ if (env_get("boardrev") &&
+ strcmp(boardrev, env_get("boardrev")))
+ save_env = true;
+ env_set("boardrev", boardrev);
+ }
+
+ str = fdt_get_board_serial();
+ if (str) {
+ snprintf(boardserial, sizeof(boardserial), "%s", str);
+ if (env_get("serial#") &&
+ strcmp(boardserial, env_get("serial#")))
+ save_env = true;
+ env_set("serial#", boardserial);
+ }
+
+ if (IS_ENABLED(CONFIG_NET_OCTEONTX))
+ board_late_probe_devices();
+
+ if (save_env)
+ env_save();
+
+ return 0;
+}
+
+/*
+ * Invoked before relocation, so limit to stack variables.
+ */
+int checkboard(void)
+{
+ printf("Board: %s\n", fdt_get_board_model());
+
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/arch/smc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ssize_t smc_dram_size(unsigned int node)
+{
+ struct pt_regs regs;
+
+ regs.regs[0] = OCTEONTX_DRAM_SIZE;
+ regs.regs[1] = node;
+ smc_call(®s);
+
+ return regs.regs[0];
+}
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <dm.h>
+#include <dm/util.h>
+#include <errno.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/board.h>
+
+int read_platform(void)
+{
+ int plat = PLATFORM_HW;
+
+ const char *model = fdt_get_board_model();
+
+ if (model && !strncmp(model, "ASIM-", 5))
+ plat = PLATFORM_ASIM;
+ if (model && !strncmp(model, "EMUL-", 5))
+ plat = PLATFORM_EMULATOR;
+ return plat;
+}
+
+static inline u64 read_midr(void)
+{
+ u64 result;
+
+ asm ("mrs %[rd],MIDR_EL1" : [rd] "=r" (result));
+ return result;
+}
+
+u8 read_partnum(void)
+{
+ return ((read_midr() >> 4) & 0xFF);
+}
+
+const char *read_board_name(void)
+{
+ return fdt_get_board_model();
+}
+
+bool read_alt_pkg(void)
+{
+ return false;
+}
--- /dev/null
+if TARGET_OCTEONTX2_95XX || TARGET_OCTEONTX2_96XX
+
+config SYS_VENDOR
+ string
+ default "Marvell"
+
+config SYS_BOARD
+ string
+ default "octeontx2"
+
+config SYS_CONFIG_NAME
+ default "octeontx2_common"
+
+endif
--- /dev/null
+OCTEONTX2 BOARD
+M: Aaron Williams <awilliams@marvell.com>
+S: Maintained
+F: board/Marvell/octeontx2/
+F: include/configs/octeontx2_96xx.h
+F: include/configs/octeontx2_95xx.h
+F: configs/octeontx2_96xx_defconfig
+F: configs/octeontx2_95xx_defconfig
--- /dev/null
+#/* SPDX-License-Identifier: GPL-2.0
+# *
+# * Copyright (C) 2018 Marvell International Ltd.
+# *
+# * https://spdx.org/licenses
+# */
+
+obj-y := board.o smc.o soc-utils.o
+obj-$(CONFIG_OF_LIBFDT) += board-fdt.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <errno.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <log.h>
+
+#include <linux/compiler.h>
+#include <linux/libfdt.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/smc.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int fdt_get_bdk_node(void)
+{
+ int node, ret;
+ const void *fdt = gd->fdt_blob;
+
+ if (!fdt) {
+ printf("ERROR: %s: no valid device tree found\n", __func__);
+ return 0;
+ }
+
+ ret = fdt_check_header(fdt);
+ if (ret < 0) {
+ printf("fdt: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ node = fdt_path_offset(fdt, "/cavium,bdk");
+ if (node < 0) {
+ printf("%s: /cavium,bdk is missing from device tree: %s\n",
+ __func__, fdt_strerror(node));
+ return 0;
+ }
+ return node;
+}
+
+u64 fdt_get_board_mac_addr(void)
+{
+ int node, len = 16;
+ const char *str = NULL;
+ const void *fdt = gd->fdt_blob;
+ u64 mac_addr = 0;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return mac_addr;
+ str = fdt_getprop(fdt, node, "BOARD-MAC-ADDRESS", &len);
+ if (str)
+ mac_addr = simple_strtol(str, NULL, 16);
+ return mac_addr;
+}
+
+int fdt_get_board_mac_cnt(void)
+{
+ int node, len = 16;
+ const char *str = NULL;
+ const void *fdt = gd->fdt_blob;
+ int mac_count = 0;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return mac_count;
+ str = fdt_getprop(fdt, node, "BOARD-MAC-ADDRESS-NUM", &len);
+ if (str) {
+ mac_count = simple_strtol(str, NULL, 10);
+ if (!mac_count)
+ mac_count = simple_strtol(str, NULL, 16);
+ debug("fdt: MAC_NUM %d\n", mac_count);
+ } else {
+ printf("Error: cannot retrieve mac count prop from fdt\n");
+ }
+ str = fdt_getprop(gd->fdt_blob, node, "BOARD-MAC-ADDRESS-NUM-OVERRIDE",
+ &len);
+ if (str) {
+ if (simple_strtol(str, NULL, 10) >= 0)
+ mac_count = simple_strtol(str, NULL, 10);
+ debug("fdt: MAC_NUM %d\n", mac_count);
+ } else {
+ printf("Error: cannot retrieve mac num override prop\n");
+ }
+ return mac_count;
+}
+
+const char *fdt_get_board_serial(void)
+{
+ const void *fdt = gd->fdt_blob;
+ int node, len = 64;
+ const char *str = NULL;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return NULL;
+
+ str = fdt_getprop(fdt, node, "BOARD-SERIAL", &len);
+ if (!str)
+ printf("Error: cannot retrieve board serial from fdt\n");
+ return str;
+}
+
+const char *fdt_get_board_revision(void)
+{
+ const void *fdt = gd->fdt_blob;
+ int node, len = 64;
+ const char *str = NULL;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return NULL;
+
+ str = fdt_getprop(fdt, node, "BOARD-REVISION", &len);
+ if (!str)
+ printf("Error: cannot retrieve board revision from fdt\n");
+ return str;
+}
+
+const char *fdt_get_board_model(void)
+{
+ int node, len = 16;
+ const char *str = NULL;
+ const void *fdt = gd->fdt_blob;
+
+ node = fdt_get_bdk_node();
+ if (!node)
+ return NULL;
+ str = fdt_getprop(fdt, node, "BOARD-MODEL", &len);
+ if (!str)
+ printf("Error: cannot retrieve board model from fdt\n");
+ return str;
+}
+
+int arch_fixup_memory_node(void *blob)
+{
+ return 0;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ int nodeoff, node, ret, i;
+ const char *temp;
+
+ static const char * const
+ octeontx_brd_nodes[] = {"BOARD-MODEL",
+ "BOARD-SERIAL",
+ "BOARD-MAC-ADDRESS",
+ "BOARD-REVISION",
+ "BOARD-MAC-ADDRESS-NUM"
+ };
+ char nodes[ARRAY_SIZE(octeontx_brd_nodes)][32];
+
+ ret = fdt_check_header(blob);
+ if (ret < 0) {
+ printf("ERROR: %s\n", fdt_strerror(ret));
+ return ret;
+ }
+
+ if (blob) {
+ nodeoff = fdt_path_offset(blob, "/cavium,bdk");
+ if (nodeoff < 0) {
+ printf("ERROR: FDT BDK node not found\n");
+ return nodeoff;
+ }
+
+ /* Read properties in temporary variables */
+ for (i = 0; i < ARRAY_SIZE(octeontx_brd_nodes); i++) {
+ temp = fdt_getprop(blob, nodeoff,
+ octeontx_brd_nodes[i], NULL);
+ strncpy(nodes[i], temp, sizeof(nodes[i]));
+ }
+
+ /* Delete cavium,bdk node */
+ ret = fdt_del_node(blob, nodeoff);
+ if (ret < 0) {
+ printf("WARNING : could not remove cavium, bdk node\n");
+ return ret;
+ }
+ debug("%s deleted 'cavium,bdk' node\n", __func__);
+ /*
+ * Add a new node at root level which would have
+ * necessary info
+ */
+ node = fdt_add_subnode(blob, 0, "octeontx_brd");
+ if (node < 0) {
+ printf("Cannot create node octeontx_brd: %s\n",
+ fdt_strerror(node));
+ return -EIO;
+ }
+
+ /* Populate properties in node */
+ for (i = 0; i < ARRAY_SIZE(octeontx_brd_nodes); i++) {
+ if (fdt_setprop_string(blob, node,
+ octeontx_brd_nodes[i],
+ nodes[i])) {
+ printf("Can't set %s\n", nodes[i]);
+ return -EIO;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * Return the FDT base address that was passed by ATF
+ *
+ * @return FDT base address received from ATF in x1 register
+ */
+void *board_fdt_blob_setup(void)
+{
+ return (void *)fdt_base_addr;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <command.h>
+#include <console.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <env.h>
+#include <init.h>
+#include <malloc.h>
+#include <net.h>
+#include <pci_ids.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <asm/arch/smc.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/board.h>
+#include <dm/util.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void cleanup_env_ethaddr(void)
+{
+ char ename[32];
+
+ for (int i = 0; i < 20; i++) {
+ sprintf(ename, i ? "eth%daddr" : "ethaddr", i);
+ if (env_get(ename))
+ env_set(ename, NULL);
+ }
+}
+
+void octeontx2_board_get_mac_addr(u8 index, u8 *mac_addr)
+{
+ u64 tmp_mac, board_mac_addr = fdt_get_board_mac_addr();
+ static int board_mac_num;
+
+ board_mac_num = fdt_get_board_mac_cnt();
+ if ((!is_zero_ethaddr((u8 *)&board_mac_addr)) && board_mac_num) {
+ tmp_mac = board_mac_addr;
+ tmp_mac += index;
+ tmp_mac = swab64(tmp_mac) >> 16;
+ memcpy(mac_addr, (u8 *)&tmp_mac, ARP_HLEN);
+ board_mac_num--;
+ } else {
+ memset(mac_addr, 0, ARP_HLEN);
+ }
+ debug("%s mac %pM\n", __func__, mac_addr);
+}
+
+void board_quiesce_devices(void)
+{
+ struct uclass *uc_dev;
+ int ret;
+
+ /* Removes all RVU PF devices */
+ ret = uclass_get(UCLASS_ETH, &uc_dev);
+ if (uc_dev)
+ ret = uclass_destroy(uc_dev);
+ if (ret)
+ printf("couldn't remove rvu pf devices\n");
+
+ if (IS_ENABLED(CONFIG_OCTEONTX2_CGX_INTF)) {
+ /* Bring down all cgx lmac links */
+ cgx_intf_shutdown();
+ }
+
+ /* Removes all CGX and RVU AF devices */
+ ret = uclass_get(UCLASS_MISC, &uc_dev);
+ if (uc_dev)
+ ret = uclass_destroy(uc_dev);
+ if (ret)
+ printf("couldn't remove misc (cgx/rvu_af) devices\n");
+
+ /* SMC call - removes all LF<->PF mappings */
+ smc_disable_rvu_lfs(0);
+}
+
+int board_early_init_r(void)
+{
+ pci_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int timer_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = smc_dram_size(0);
+ gd->ram_size -= CONFIG_SYS_SDRAM_BASE;
+
+ mem_map_fill();
+
+ return 0;
+}
+
+void board_late_probe_devices(void)
+{
+ struct udevice *dev;
+ int err, cgx_cnt = 3, i;
+
+ /* Probe MAC(CGX) and NIC AF devices before Network stack init */
+ for (i = 0; i < cgx_cnt; i++) {
+ err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVICE_ID_CAVIUM_CGX, i, &dev);
+ if (err)
+ debug("%s CGX%d device not found\n", __func__, i);
+ }
+ err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVICE_ID_CAVIUM_RVU_AF, 0, &dev);
+ if (err)
+ debug("NIC AF device not found\n");
+}
+
+/**
+ * Board late initialization routine.
+ */
+int board_late_init(void)
+{
+ char boardname[32];
+ char boardserial[150], boardrev[150];
+ long val;
+ bool save_env = false;
+ const char *str;
+
+ debug("%s()\n", __func__);
+
+ /*
+ * Now that pci_init initializes env device.
+ * Try to cleanup ethaddr env variables, this is needed
+ * as with each boot, configuration of QLM can change.
+ */
+ cleanup_env_ethaddr();
+
+ snprintf(boardname, sizeof(boardname), "%s> ", fdt_get_board_model());
+ env_set("prompt", boardname);
+ set_working_fdt_addr(env_get_hex("fdtcontroladdr", fdt_base_addr));
+
+ str = fdt_get_board_revision();
+ if (str) {
+ snprintf(boardrev, sizeof(boardrev), "%s", str);
+ if (env_get("boardrev") &&
+ strcmp(boardrev, env_get("boardrev")))
+ save_env = true;
+ env_set("boardrev", boardrev);
+ }
+
+ str = fdt_get_board_serial();
+ if (str) {
+ snprintf(boardserial, sizeof(boardserial), "%s", str);
+ if (env_get("serial#") &&
+ strcmp(boardserial, env_get("serial#")))
+ save_env = true;
+ env_set("serial#", boardserial);
+ }
+
+ val = env_get_hex("disable_ooo", 0);
+ smc_configure_ooo(val);
+
+ if (IS_ENABLED(CONFIG_NET_OCTEONTX2))
+ board_late_probe_devices();
+
+ if (save_env)
+ env_save();
+
+ return 0;
+}
+
+/*
+ * Invoked before relocation, so limit to stack variables.
+ */
+int checkboard(void)
+{
+ printf("Board: %s\n", fdt_get_board_model());
+
+ return 0;
+}
+
+void board_acquire_flash_arb(bool acquire)
+{
+ union cpc_boot_ownerx ownerx;
+
+ if (!acquire) {
+ ownerx.u = readl(CPC_BOOT_OWNERX(3));
+ ownerx.s.boot_req = 0;
+ writel(ownerx.u, CPC_BOOT_OWNERX(3));
+ } else {
+ ownerx.u = 0;
+ ownerx.s.boot_req = 1;
+ writel(ownerx.u, CPC_BOOT_OWNERX(3));
+ udelay(1);
+ do {
+ ownerx.u = readl(CPC_BOOT_OWNERX(3));
+ } while (ownerx.s.boot_wait);
+ }
+}
+
+int last_stage_init(void)
+{
+ (void)smc_flsf_fw_booted();
+ return 0;
+}
+
+static int do_go_uboot(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ typedef void __noreturn (*uboot_entry_t)(ulong, void *);
+ uboot_entry_t entry;
+ ulong addr;
+ void *fdt;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+ fdt = board_fdt_blob_setup();
+ entry = (uboot_entry_t)addr;
+ flush_cache((ulong)addr, 1 << 20); /* 1MiB should be enough */
+ dcache_disable();
+
+ printf("## Starting U-Boot at %p (FDT at %p)...\n", entry, fdt);
+
+ entry(0, fdt);
+
+ return 0;
+}
+
+U_BOOT_CMD(go_uboot, 2, 0, do_go_uboot,
+ "Start U-Boot from RAM (pass FDT via x1 register)",
+ "");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/arch/smc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ssize_t smc_dram_size(unsigned int node)
+{
+ struct pt_regs regs;
+
+ regs.regs[0] = OCTEONTX2_DRAM_SIZE;
+ regs.regs[1] = node;
+ smc_call(®s);
+
+ return regs.regs[0];
+}
+
+ssize_t smc_disable_rvu_lfs(unsigned int node)
+{
+ struct pt_regs regs;
+
+ regs.regs[0] = OCTEONTX2_DISABLE_RVU_LFS;
+ regs.regs[1] = node;
+ smc_call(®s);
+
+ return regs.regs[0];
+}
+
+ssize_t smc_configure_ooo(unsigned int val)
+{
+ struct pt_regs regs;
+
+ regs.regs[0] = OCTEONTX2_CONFIG_OOO;
+ regs.regs[1] = val;
+ smc_call(®s);
+
+ return regs.regs[0];
+}
+
+ssize_t smc_flsf_fw_booted(void)
+{
+ struct pt_regs regs;
+
+ regs.regs[0] = OCTEONTX2_FSAFE_PR_BOOT_SUCCESS;
+ smc_call(®s);
+
+ return regs.regs[0];
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/board.h>
+#include <dm/util.h>
+
+int read_platform(void)
+{
+ int plat = PLATFORM_HW;
+
+ const char *model = fdt_get_board_model();
+
+ if (model && !strncmp(model, "ASIM-", 5))
+ plat = PLATFORM_ASIM;
+ if (model && !strncmp(model, "EMUL-", 5))
+ plat = PLATFORM_EMULATOR;
+
+ return plat;
+}
+
+static inline u64 read_midr(void)
+{
+ u64 result;
+
+ asm ("mrs %[rd],MIDR_EL1" : [rd] "=r" (result));
+ return result;
+}
+
+u8 read_partnum(void)
+{
+ return ((read_midr() >> 4) & 0xFF);
+}
+
+const char *read_board_name(void)
+{
+ return fdt_get_board_model();
+}
+
--- /dev/null
+if TARGET_TOTAL_COMPUTE
+
+config SYS_BOARD
+ default "total_compute"
+
+config SYS_VENDOR
+ default "armltd"
+
+config SYS_CONFIG_NAME
+ default "total_compute"
+
+endif
--- /dev/null
+TOTAL_COMPUTE BOARD
+M: Usama Arif <usama.arif@arm.com>
+S: Maintained
+F: board/armltd/total_compute/
+F: include/configs/total_compute.h
+F: configs/total_compute_defconfig
+F: arch/arm/dts/total_compute.dts
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020 Arm Limited
+# Usama Arif <usama.arif@arm.com>
+
+obj-y := total_compute.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Arm Limited
+ * Usama Arif <usama.arif@arm.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_pl01x.h>
+#include <asm/armv8/mmu.h>
+
+static const struct pl01x_serial_platdata serial_platdata = {
+ .base = UART0_BASE,
+ .type = TYPE_PL011,
+ .clock = CONFIG_PL011_CLOCK,
+};
+
+U_BOOT_DEVICE(total_compute_serials) = {
+ .name = "serial_pl01x",
+ .platdata = &serial_platdata,
+};
+
+static struct mm_region total_compute_mem_map[] = {
+ {
+ .virt = 0x0UL,
+ .phys = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0x80000000UL,
+ .phys = 0x80000000UL,
+ .size = 0xff80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = total_compute_mem_map;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+/* Nothing to be done here as handled by PSCI interface */
+void reset_cpu(ulong addr)
+{
+}
#include <common.h>
#include <hang.h>
+#include <led.h>
#include <log.h>
#ifdef CONFIG_SPL_BUILD
+DECLARE_GLOBAL_DATA_PTR;
static int setup_led(void)
{
#ifdef CONFIG_SPL_LED
debug("%s: get=%d\n", __func__, ret);
return ret;
}
- ret = led_set_on(dev, 1);
+ ret = led_set_state(dev, LEDST_ON);
if (ret)
return ret;
#endif
return 0;
}
-
-#if CONFIG_IS_ENABLED(OF_BOARD_SETUP) && CONFIG_IS_ENABLED(PCI)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- struct udevice *dev;
- struct uclass *uc;
- fdt_addr_t regs_addr;
- int i, off, ret;
-
- ret = uclass_get(UCLASS_PCI, &uc);
- if (ret)
- return ret;
-
- uclass_foreach_dev(dev, uc) {
- struct pci_controller hose = { 0 };
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- if (hose.region_count == MAX_PCI_REGIONS) {
- printf("maximum number of regions parsed, aborting\n");
- break;
- }
-
- if (bd->bi_dram[i].size) {
- pci_set_region(&hose.regions[hose.region_count++],
- bd->bi_dram[i].start,
- bd->bi_dram[i].start,
- bd->bi_dram[i].size,
- PCI_REGION_MEM |
- PCI_REGION_PREFETCH |
- PCI_REGION_SYS_MEMORY);
- }
- }
-
- regs_addr = devfdt_get_addr_index(dev, 0);
- off = fdt_node_offset_by_compat_reg(blob,
- "renesas,pcie-rcar-gen3", regs_addr);
- if (off < 0) {
- printf("Failed to find PCIe node@%llx\n", regs_addr);
- return off;
- }
-
- fdt_pci_dma_ranges(blob, off, &hose);
- }
-
- return 0;
-}
-#endif
#endif
F: arch/riscv/dts/k210.dtsi
F: arch/riscv/dts/k210-maix-bit.dts
F: board/sipeed/maix/
-F: configs/sipeed_maix_bitm_defconfig
+F: configs/sipeed_maix*_defconfig
F: doc/board/sipeed/
F: include/configs/sipeed-maix.h
F: include/dt-bindings/*/k210-sysctl.h
XEN GUEST FOR ARM64
-M: Andrii Anisov <andrii_anisov@epam.com>
+M: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
+M: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
S: Maintained
F: board/xen/xenguest_arm64/
F: doc/board/xen/
return 0;
}
-int board_early_init_f(void)
-{
- return 0;
-}
-
int print_cpuinfo(void)
{
printf("Xen virtual CPU\n");
#include <linux/sizes.h>
#include "board.h"
+#if defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
int ret = -EINVAL;
-
-#if defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
struct udevice *dev;
ofnode eeprom;
debug("%s: I2C EEPROM MAC address read failed\n", __func__);
else
debug("%s: I2C EEPROM MAC %pM\n", __func__, ethaddr);
-#endif
return ret;
}
+#endif
#if defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
void *board_fdt_blob_setup(void)
int board_late_init_xilinx(void)
{
- ulong initrd_hi;
+ u32 ret = 0;
+ phys_size_t bootm_size = gd->ram_size;
+
+ if (CONFIG_IS_ENABLED(ARCH_ZYNQ))
+ bootm_size = min(bootm_size, (phys_size_t)(SZ_512M + SZ_256M));
- env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
+ ret |= env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
- initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE;
- initrd_hi = round_down(initrd_hi, SZ_16M);
- env_set_addr("initrd_high", (void *)initrd_hi);
+ ret |= env_set_addr("bootm_low", (void *)gd->ram_base);
+ ret |= env_set_addr("bootm_size", (void *)bootm_size);
+
+ if (ret)
+ printf("%s: Saving run time variables FAILED\n", __func__);
return 0;
}
--- /dev/null
+# Copyright (c) 2020, Xilinx, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0
+
+if ARCH_VERSAL
+
+config CMD_VERSAL
+ bool "Enable Versal specific commands"
+ default y
+ depends on ZYNQMP_FIRMWARE
+ help
+ Enable Versal specific commands.
+
+endif
#
obj-y := board.o
+obj-$(CONFIG_CMD_VERSAL) += cmds.o
obj-y += ../common/board.o
return 0;
}
+ if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
+ return 0;
+
bootmode = versal_get_bootmode();
puts("Bootmode: ");
int dram_init(void)
{
- if (fdtdec_setup_mem_size_base() != 0)
+ if (fdtdec_setup_mem_size_base_lowest() != 0)
return -EINVAL;
return 0;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2020 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <cpu_func.h>
+#include <command.h>
+#include <common.h>
+#include <log.h>
+#include <memalign.h>
+#include <versalpl.h>
+#include <zynqmp_firmware.h>
+
+static int do_versal_load_pdi(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 buf_lo, buf_hi;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ ulong addr, *pdi_buf;
+ size_t len;
+ int ret;
+
+ if (argc != cmdtp->maxargs) {
+ debug("pdi_load: incorrect parameters passed\n");
+ return CMD_RET_USAGE;
+ }
+
+ addr = simple_strtol(argv[2], NULL, 16);
+ if (!addr) {
+ debug("pdi_load: zero pdi_data address\n");
+ return CMD_RET_USAGE;
+ }
+
+ len = simple_strtoul(argv[3], NULL, 16);
+ if (!len) {
+ debug("pdi_load: zero size\n");
+ return CMD_RET_USAGE;
+ }
+
+ pdi_buf = (ulong *)ALIGN((ulong)addr, ARCH_DMA_MINALIGN);
+ if ((ulong)addr != (ulong)pdi_buf) {
+ memcpy((void *)pdi_buf, (void *)addr, len);
+ debug("Pdi addr:0x%lx aligned to 0x%lx\n",
+ addr, (ulong)pdi_buf);
+ }
+
+ flush_dcache_range((ulong)pdi_buf, (ulong)pdi_buf + len);
+
+ buf_lo = lower_32_bits((ulong)pdi_buf);
+ buf_hi = upper_32_bits((ulong)pdi_buf);
+
+ ret = xilinx_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo,
+ buf_hi, 0, ret_payload);
+ if (ret)
+ printf("PDI load failed with err: 0x%08x\n", ret);
+
+ return ret;
+}
+
+static struct cmd_tbl cmd_versal_sub[] = {
+ U_BOOT_CMD_MKENT(loadpdi, 4, 1, do_versal_load_pdi, "", ""),
+};
+
+/**
+ * do_versal - Handle the "versal" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Processes the versal specific commands
+ *
+ * Return: return 0 on success, Error value if command fails.
+ * CMD_RET_USAGE incase of incorrect/missing parameters.
+ */
+static int do_versal(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct cmd_tbl *c;
+ int ret = CMD_RET_USAGE;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ c = find_cmd_tbl(argv[1], &cmd_versal_sub[0],
+ ARRAY_SIZE(cmd_versal_sub));
+ if (c)
+ ret = c->cmd(c, flag, argc, argv);
+
+ return cmd_process_error(c, ret);
+}
+
+#ifdef CONFIG_SYS_LONGHELP
+static char versal_help_text[] =
+ "loadpdi addr len - Load pdi image\n"
+ "load pdi image at ddr address 'addr' with pdi image size 'len'\n"
+;
+#endif
+
+U_BOOT_CMD(versal, 4, 1, do_versal,
+ "versal sub-system",
+ versal_help_text
+)
+
#include <common.h>
#include <init.h>
+#include <log.h>
#include <dm/uclass.h>
#include <env.h>
#include <fdtdec.h>
char *new_targets;
char *env_targets;
+ if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
+ debug("Saved variables - Skipping\n");
+ return 0;
+ }
+
+ if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
+ return 0;
+
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
case ZYNQ_BM_QSPI:
mode = "qspi";
};
#endif
-int chip_id(unsigned char id)
-{
- struct pt_regs regs;
- int val = -EINVAL;
-
- if (current_el() != 3) {
- regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID;
- regs.regs[1] = 0;
- regs.regs[2] = 0;
- regs.regs[3] = 0;
-
- smc_call(®s);
-
- /*
- * SMC returns:
- * regs[0][31:0] = status of the operation
- * regs[0][63:32] = CSU.IDCODE register
- * regs[1][31:0] = CSU.version register
- * regs[1][63:32] = CSU.IDCODE2 register
- */
- switch (id) {
- case IDCODE:
- regs.regs[0] = upper_32_bits(regs.regs[0]);
- regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
- ZYNQMP_CSU_IDCODE_SVD_MASK;
- regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
- val = regs.regs[0];
- break;
- case VERSION:
- regs.regs[1] = lower_32_bits(regs.regs[1]);
- regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK;
- val = regs.regs[1];
- break;
- case IDCODE2:
- regs.regs[1] = lower_32_bits(regs.regs[1]);
- regs.regs[1] >>= ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
- val = regs.regs[1];
- break;
- default:
- printf("%s, Invalid Req:0x%x\n", __func__, id);
- }
- } else {
- switch (id) {
- case IDCODE:
- val = readl(ZYNQMP_CSU_IDCODE_ADDR);
- val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
- ZYNQMP_CSU_IDCODE_SVD_MASK;
- val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
- break;
- case VERSION:
- val = readl(ZYNQMP_CSU_VER_ADDR);
- val &= ZYNQMP_CSU_SILICON_VER_MASK;
- break;
- default:
- printf("%s, Invalid Req:0x%x\n", __func__, id);
- }
- }
-
- return val;
-}
-
#define ZYNQMP_VERSION_SIZE 9
#define ZYNQMP_PL_STATUS_BIT 9
#define ZYNQMP_IPDIS_VCU_BIT 8
u32 i, id, ver, j;
char *buf;
static char name[ZYNQMP_VERSION_SIZE];
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ xilinx_pm_request(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
+
+ /*
+ * Firmware returns:
+ * payload[0][31:0] = status of the operation
+ * payload[1]] = IDCODE
+ * payload[2][19:0] = Version
+ * payload[2][28:20] = EXTENDED_IDCODE
+ * payload[2][29] = PL_INIT
+ */
+
+ /* Get IDCODE field */
+ id = ret_payload[1];
+ id &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK | ZYNQMP_CSU_IDCODE_SVD_MASK;
+ id >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
- id = chip_id(IDCODE);
- ver = chip_id(IDCODE2);
+ /* Shift silicon version info */
+ ver = ret_payload[2] >> ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
+
+ debug("%s, ID: 0x%0X, Ver: 0x%0X\r\n", __func__, id, ver);
for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
if (zynqmp_devices[i].id == id) {
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
defined(CONFIG_SPL_BUILD))
- if (current_el() != 3) {
- zynqmppl.name = zynqmp_get_silicon_idcode_name();
- printf("Chip ID:\t%s\n", zynqmppl.name);
- fpga_init();
- fpga_add(fpga_xilinx, &zynqmppl);
- }
+ zynqmppl.name = zynqmp_get_silicon_idcode_name();
+ printf("Chip ID:\t%s\n", zynqmppl.name);
+ fpga_init();
+ fpga_add(fpga_xilinx, &zynqmppl);
#endif
if (current_el() == 3)
char *compatible, *fdtfile;
const char *suffix = ".dtb";
const char *vendor = "xilinx/";
+ int fdt_compat_len;
if (env_get("fdtfile"))
return 0;
- compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible", NULL);
- if (compatible) {
+ compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible",
+ &fdt_compat_len);
+ if (compatible && fdt_compat_len) {
+ char *name;
+
debug("Compatible: %s\n", compatible);
- /* Discard vendor prefix */
- strsep(&compatible, ",");
+ name = strchr(compatible, ',');
+ if (!name)
+ return -EINVAL;
- fdtfile = calloc(1, strlen(vendor) + strlen(compatible) +
+ name++;
+
+ fdtfile = calloc(1, strlen(vendor) + strlen(name) +
strlen(suffix) + 1);
if (!fdtfile)
return -ENOMEM;
- sprintf(fdtfile, "%s%s%s", vendor, compatible, suffix);
+ sprintf(fdtfile, "%s%s%s", vendor, name, suffix);
env_set("fdtfile", fdtfile);
free(fdtfile);
return 0;
}
+ if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
+ return 0;
+
ret = set_fdtfile();
if (ret)
return ret;
help
Read system EEPROM data block in ONIE Tlvinfo format from SPL.
+config CMD_SBI
+ bool "sbi"
+ depends on RISCV_SMODE && SBI_V02
+ help
+ Display information about the SBI implementation.
+
endmenu
menu "Boot commands"
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
+#include <dm/root.h>
#include <dm/uclass-internal.h>
static int bind_by_class_index(const char *uclass, int index,
}
ofnode = ofnode_path(path);
- ret = device_bind_with_driver_data(parent, drv, ofnode_get_name(ofnode),
- 0, ofnode, &dev);
+ ret = lists_bind_fdt(parent, ofnode, &dev, false);
+
if (!dev || ret) {
printf("Unable to bind. err:%d\n", ret);
return ret;
/**
* do_bootefi_exec() - execute EFI binary
*
+ * The image indicated by @handle is started. When it returns the allocated
+ * memory for the @load_options is freed.
+ *
* @handle: handle of loaded image
+ * @load_options: load options
* Return: status code
*
* Load the EFI binary into a newly assigned memory unwinding the relocation
clkp = dev_get_clk_ptr(dev);
if (device_get_uclass_id(dev) == UCLASS_CLK && clkp) {
+ depth++;
rate = clk_get_rate(clkp);
- printf(" %-12u %8d ", rate, clkp->enable_count);
-
- for (i = depth; i >= 0; i--) {
- is_last = (last_flag >> i) & 1;
- if (i) {
- if (is_last)
- printf(" ");
- else
- printf("| ");
- } else {
- if (is_last)
- printf("`-- ");
- else
- printf("|-- ");
+ printf(" %-12u %8d ", rate, clkp->enable_count);
+
+ for (i = depth; i >= 0; i--) {
+ is_last = (last_flag >> i) & 1;
+ if (i) {
+ if (is_last)
+ printf(" ");
+ else
+ printf("| ");
+ } else {
+ if (is_last)
+ printf("`-- ");
+ else
+ printf("|-- ");
+ }
}
- }
- printf("%s\n", dev->name);
+ printf("%s\n", dev->name);
}
list_for_each_entry(child, &dev->child_head, sibling_node) {
is_last = list_is_last(&child->sibling_node, &dev->child_head);
- show_clks(child, depth + 1, (last_flag << 1) | is_last);
+ show_clks(child, depth, (last_flag << 1) | is_last);
}
}
srcbz = srcdesc->blksz;
destbz = destdesc->blksz;
- if ((srcbz * (buffersize / srcbz) != buffersize) &&
+ if ((srcbz * (buffersize / srcbz) != buffersize) ||
(destbz * (buffersize / destbz) != buffersize)) {
printf("failed: cannot match device block sizes\n");
return 1;
switch (unit[0]) {
case 'g':
case 'G':
- requested *= 1024;
+ requested *= 1024 * 1024 * 1024;
+ break;
case 'm':
case 'M':
- requested *= 1024;
+ requested *= 1024 * 1024;
+ break;
case 'k':
case 'K':
requested *= 1024;
argc--;
argv++;
addr = simple_strtoul(argv[0], &ep, 16);
- if (*ep != ',')
+ if (*ep != ':')
return CMD_RET_USAGE;
/* 0 should be allowed for delete */
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_CMD_EXCEPTION) += exception.o
+obj-$(CONFIG_CMD_SBI) += sbi.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * The 'sbi' command displays information about the SBI implementation.
+ *
+ * Copyright (c) 2020, Heinrich Schuchardt <xypron.glpk@gmx.de>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/sbi.h>
+
+struct sbi_ext {
+ const u32 id;
+ const char *name;
+};
+
+static struct sbi_ext extensions[] = {
+ { 0x00000000, "sbi_set_timer" },
+ { 0x00000001, "sbi_console_putchar" },
+ { 0x00000002, "sbi_console_getchar" },
+ { 0x00000003, "sbi_clear_ipi" },
+ { 0x00000004, "sbi_send_ipi" },
+ { 0x00000005, "sbi_remote_fence_i" },
+ { 0x00000006, "sbi_remote_sfence_vma" },
+ { 0x00000007, "sbi_remote_sfence_vma_asid" },
+ { 0x00000008, "sbi_shutdown" },
+ { 0x00000010, "SBI Base Functionality" },
+ { 0x54494D45, "Timer Extension" },
+ { 0x00735049, "IPI Extension" },
+ { 0x52464E43, "RFENCE Extension" },
+ { 0x0048534D, "Hart State Management Extension" },
+};
+
+static int do_sbi(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ int i;
+ long ret;
+
+ ret = sbi_get_spec_version();
+ if (ret >= 0)
+ printf("SBI %ld.%ld\n", ret >> 24, ret & 0xffffff);
+ ret = sbi_get_impl_id();
+ if (ret >= 0) {
+ switch (ret) {
+ case 0:
+ printf("Berkeley Boot Loader (BBL)\n");
+ break;
+ case 1:
+ printf("OpenSBI\n");
+ break;
+ case 2:
+ printf("Xvisor\n");
+ break;
+ case 3:
+ printf("KVM\n");
+ break;
+ default:
+ printf("Unknown implementation\n");
+ break;
+ }
+ }
+ printf("Extensions:\n");
+ for (i = 0; i < ARRAY_SIZE(extensions); ++i) {
+ ret = sbi_probe_extension(extensions[i].id);
+ if (ret > 0)
+ printf(" %s\n", extensions[i].name);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_SYS_LONGHELP
+static char sbi_help_text[] =
+ "- display SBI spec version, implementation, and available extensions";
+
+#endif
+
+U_BOOT_CMD_COMPLETE(
+ sbi, 1, 0, do_sbi,
+ "display SBI information",
+ sbi_help_text, NULL
+);
removed (for example a USB keyboard) then this option can be
enabled to ensure this is handled correctly.
+config SPL_SYS_STDIO_DEREGISTER
+ bool "Allow deregistering stdio devices in SPL"
+ help
+ Generally there is no need to deregister stdio devices since they
+ are never deactivated. But if a stdio device is used which can be
+ removed (for example a USB keyboard) then this option can be
+ enabled to ensure this is handled correctly. This is very rarely
+ needed in SPL.
+
+config SYS_DEVICE_NULLDEV
+ bool "Enable a null device for stdio"
+ default y if SPLASH_SCREEN || SYS_STDIO_DEREGISTER
+ help
+ Enable creation of a "nulldev" stdio device. This allows silent
+ operation of the console by setting stdout to "nulldev". Enable
+ this to use a serial console under board control.
+
endmenu
menu "Logging"
config AVB_VERIFY
bool "Build Android Verified Boot operations"
- depends on LIBAVB && FASTBOOT
+ depends on LIBAVB
depends on PARTITION_UUIDS
help
This option enables compilation of bootloader-dependent operations,
* Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
* Helpers to alloc/init/free avb ops.
+if AVB_VERIFY
+
+config AVB_BUF_ADDR
+ hex "Define AVB buffer address"
+ default FASTBOOT_BUF_ADDR
+ help
+ AVB requires a buffer for memory transactions. This variable defines the
+ buffer address.
+
+config AVB_BUF_SIZE
+ hex "Define AVB buffer SIZE"
+ default FASTBOOT_BUF_SIZE
+ help
+ AVB requires a buffer for memory transactions. This variable defines the
+ buffer size.
+
+endif # AVB_VERIFY
+
config SPL_HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
#include <avb_verify.h>
#include <blk.h>
#include <cpu_func.h>
-#include <fastboot.h>
#include <image.h>
#include <malloc.h>
#include <part.h>
static int init_func_i2c(void)
{
puts("I2C: ");
-#ifdef CONFIG_SYS_I2C
i2c_init_all();
-#else
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
puts("ready\n");
return 0;
}
#include <stdio_dev.h>
#include <serial.h>
#include <splash.h>
-
-#if defined(CONFIG_SYS_I2C)
#include <i2c.h>
-#endif
#include <dm/device-internal.h>
struct stdio_dev *stdio_devices[] = { NULL, NULL, NULL };
char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
-#if defined(CONFIG_SPLASH_SCREEN) && !defined(CONFIG_SYS_DEVICE_NULLDEV)
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-#endif
-
-#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-#endif
-
-#ifdef CONFIG_SYS_DEVICE_NULLDEV
static void nulldev_putc(struct stdio_dev *dev, const char c)
{
/* nulldev is empty! */
/* nulldev is empty! */
return 0;
}
-#endif
static void stdio_serial_putc(struct stdio_dev *dev, const char c)
{
dev.tstc = stdio_serial_tstc;
stdio_register (&dev);
-#ifdef CONFIG_SYS_DEVICE_NULLDEV
- memset (&dev, 0, sizeof (dev));
+ if (CONFIG_IS_ENABLED(SYS_DEVICE_NULLDEV)) {
+ memset(&dev, '\0', sizeof(dev));
- strcpy (dev.name, "nulldev");
- dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
- dev.putc = nulldev_putc;
- dev.puts = nulldev_puts;
- dev.getc = nulldev_input;
- dev.tstc = nulldev_input;
+ strcpy(dev.name, "nulldev");
+ dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
+ dev.putc = nulldev_putc;
+ dev.puts = nulldev_puts;
+ dev.getc = nulldev_input;
+ dev.tstc = nulldev_input;
- stdio_register (&dev);
-#endif
+ stdio_register(&dev);
+ }
}
/**************************************************************************
*/
struct list_head* stdio_get_list(void)
{
- return &(devs.list);
+ return &devs.list;
}
-#ifdef CONFIG_DM_VIDEO
/**
* stdio_probe_device() - Find a device which provides the given stdio device
*
return 0;
}
-#endif
struct stdio_dev *stdio_get_by_name(const char *name)
{
if (!name)
return NULL;
- list_for_each(pos, &(devs.list)) {
+ list_for_each(pos, &devs.list) {
sdev = list_entry(pos, struct stdio_dev, list);
if (strcmp(sdev->name, name) == 0)
return sdev;
}
-#ifdef CONFIG_DM_VIDEO
- /*
- * We did not find a suitable stdio device. If there is a video
- * driver with a name starting with 'vidconsole', we can try probing
- * that in the hope that it will produce the required stdio device.
- *
- * This function is sometimes called with the entire value of
- * 'stdout', which may include a list of devices separate by commas.
- * Obviously this is not going to work, so we ignore that case. The
- * call path in that case is console_init_r() -> search_device() ->
- * stdio_get_by_name().
- */
- if (!strncmp(name, "vidconsole", 10) && !strchr(name, ',') &&
- !stdio_probe_device(name, UCLASS_VIDEO, &sdev))
- return sdev;
-#endif
+ if (IS_ENABLED(CONFIG_DM_VIDEO)) {
+ /*
+ * We did not find a suitable stdio device. If there is a video
+ * driver with a name starting with 'vidconsole', we can try
+ * probing that in the hope that it will produce the required
+ * stdio device.
+ *
+ * This function is sometimes called with the entire value of
+ * 'stdout', which may include a list of devices separate by
+ * commas. Obviously this is not going to work, so we ignore
+ * that case. The call path in that case is
+ * console_init_r() -> search_device() -> stdio_get_by_name()
+ */
+ if (!strncmp(name, "vidconsole", 10) && !strchr(name, ',') &&
+ !stdio_probe_device(name, UCLASS_VIDEO, &sdev))
+ return sdev;
+ }
return NULL;
}
-struct stdio_dev* stdio_clone(struct stdio_dev *dev)
+struct stdio_dev *stdio_clone(struct stdio_dev *dev)
{
struct stdio_dev *_dev;
- if(!dev)
+ if (!dev)
return NULL;
_dev = calloc(1, sizeof(struct stdio_dev));
-
- if(!_dev)
+ if (!_dev)
return NULL;
memcpy(_dev, dev, sizeof(struct stdio_dev));
struct stdio_dev *_dev;
_dev = stdio_clone(dev);
- if(!_dev)
+ if (!_dev)
return -ENODEV;
- list_add_tail(&(_dev->list), &(devs.list));
+ list_add_tail(&_dev->list, &devs.list);
if (devp)
*devp = _dev;
return stdio_register_dev(dev, NULL);
}
-/* deregister the device "devname".
- * returns 0 if success, -1 if device is assigned and 1 if devname not found
- */
-#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
int stdio_deregister_dev(struct stdio_dev *dev, int force)
{
- int l;
struct list_head *pos;
char temp_names[3][16];
+ int i;
/* get stdio devices (ListRemoveItem changes the dev list) */
- for (l=0 ; l< MAX_FILES; l++) {
- if (stdio_devices[l] == dev) {
+ for (i = 0 ; i < MAX_FILES; i++) {
+ if (stdio_devices[i] == dev) {
if (force) {
- strcpy(temp_names[l], "nulldev");
+ strcpy(temp_names[i], "nulldev");
continue;
}
/* Device is assigned -> report error */
- return -1;
+ return -EBUSY;
}
- memcpy (&temp_names[l][0],
- stdio_devices[l]->name,
- sizeof(temp_names[l]));
+ memcpy(&temp_names[i][0], stdio_devices[i]->name,
+ sizeof(temp_names[i]));
}
- list_del(&(dev->list));
+ list_del(&dev->list);
free(dev);
- /* reassign Device list */
- list_for_each(pos, &(devs.list)) {
+ /* reassign device list */
+ list_for_each(pos, &devs.list) {
dev = list_entry(pos, struct stdio_dev, list);
- for (l=0 ; l< MAX_FILES; l++) {
- if(strcmp(dev->name, temp_names[l]) == 0)
- stdio_devices[l] = dev;
+ for (i = 0 ; i < MAX_FILES; i++) {
+ if (strcmp(dev->name, temp_names[i]) == 0)
+ stdio_devices[i] = dev;
}
}
+
return 0;
}
struct stdio_dev *dev;
dev = stdio_get_by_name(devname);
-
if (!dev) /* device not found */
return -ENODEV;
return stdio_deregister_dev(dev, force);
}
-#endif /* CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) */
int stdio_init_tables(void)
{
#endif /* CONFIG_NEEDS_MANUAL_RELOC */
/* Initialize the list */
- INIT_LIST_HEAD(&(devs.list));
+ INIT_LIST_HEAD(&devs.list);
return 0;
}
int stdio_add_devices(void)
{
-#ifdef CONFIG_DM_KEYBOARD
struct udevice *dev;
struct uclass *uc;
int ret;
- /*
- * For now we probe all the devices here. At some point this should be
- * done only when the devices are required - e.g. we have a list of
- * input devices to start up in the stdin environment variable. That
- * work probably makes more sense when stdio itself is converted to
- * driver model.
- *
- * TODO(sjg@chromium.org): Convert changing uclass_first_device() etc.
- * to return the device even on error. Then we could use that here.
- */
- ret = uclass_get(UCLASS_KEYBOARD, &uc);
- if (ret)
- return ret;
-
- /* Don't report errors to the caller - assume that they are non-fatal */
- uclass_foreach_dev(dev, uc) {
- ret = device_probe(dev);
+ if (IS_ENABLED(CONFIG_DM_KEYBOARD)) {
+ /*
+ * For now we probe all the devices here. At some point this
+ * should be done only when the devices are required - e.g. we
+ * have a list of input devices to start up in the stdin
+ * environment variable. That work probably makes more sense
+ * when stdio itself is converted to driver model.
+ *
+ * TODO(sjg@chromium.org): Convert changing
+ * uclass_first_device() etc. to return the device even on
+ * error. Then we could use that here.
+ */
+ ret = uclass_get(UCLASS_KEYBOARD, &uc);
if (ret)
- printf("Failed to probe keyboard '%s'\n", dev->name);
+ return ret;
+
+ /*
+ * Don't report errors to the caller - assume that they are
+ * non-fatal
+ */
+ uclass_foreach_dev(dev, uc) {
+ ret = device_probe(dev);
+ if (ret)
+ printf("Failed to probe keyboard '%s'\n",
+ dev->name);
+ }
}
-#endif
#ifdef CONFIG_SYS_I2C
i2c_init_all();
-#else
#endif
-#ifdef CONFIG_DM_VIDEO
- /*
- * If the console setting is not in environment variables then
- * console_init_r() will not be calling iomux_doenv() (which calls
- * search_device()). So we will not dynamically add devices by
- * calling stdio_probe_device().
- *
- * So just probe all video devices now so that whichever one is
- * required will be available.
- */
-#ifndef CONFIG_SYS_CONSOLE_IS_IN_ENV
- struct udevice *vdev;
-# ifndef CONFIG_DM_KEYBOARD
- int ret;
-# endif
-
- for (ret = uclass_first_device(UCLASS_VIDEO, &vdev);
- vdev;
- ret = uclass_next_device(&vdev))
- ;
- if (ret)
- printf("%s: Video device failed (ret=%d)\n", __func__, ret);
-#endif /* !CONFIG_SYS_CONSOLE_IS_IN_ENV */
-#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_CMD_BMP)
- splash_display();
-#endif /* CONFIG_SPLASH_SCREEN && CONFIG_CMD_BMP */
-#else
-# if defined(CONFIG_LCD)
- drv_lcd_init ();
-# endif
-# if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
- drv_video_init ();
-# endif
-#endif /* CONFIG_DM_VIDEO */
+ if (IS_ENABLED(CONFIG_DM_VIDEO)) {
+ /*
+ * If the console setting is not in environment variables then
+ * console_init_r() will not be calling iomux_doenv() (which
+ * calls search_device()). So we will not dynamically add
+ * devices by calling stdio_probe_device().
+ *
+ * So just probe all video devices now so that whichever one is
+ * required will be available.
+ */
+ struct udevice *vdev;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_SYS_CONSOLE_IS_IN_ENV)) {
+ for (ret = uclass_first_device(UCLASS_VIDEO, &vdev);
+ vdev;
+ ret = uclass_next_device(&vdev))
+ ;
+ if (ret)
+ printf("%s: Video device failed (ret=%d)\n",
+ __func__, ret);
+ }
+ if (IS_ENABLED(CONFIG_SPLASH_SCREEN) &&
+ IS_ENABLED(CONFIG_CMD_BMP))
+ splash_display();
+ } else {
+ if (IS_ENABLED(CONFIG_LCD))
+ drv_lcd_init();
+ if (IS_ENABLED(CONFIG_VIDEO) || IS_ENABLED(CONFIG_CFB_CONSOLE))
+ drv_video_init();
+ }
+
#if defined(CONFIG_KEYBOARD) && !defined(CONFIG_DM_KEYBOARD)
- drv_keyboard_init ();
+ drv_keyboard_init();
#endif
- drv_system_init ();
- serial_stdio_init ();
+ drv_system_init();
+ serial_stdio_init();
#ifdef CONFIG_USB_TTY
- drv_usbtty_init ();
-#endif
-#ifdef CONFIG_NETCONSOLE
- drv_nc_init ();
+ drv_usbtty_init();
#endif
+ if (IS_ENABLED(CONFIG_NETCONSOLE))
+ drv_nc_init();
#ifdef CONFIG_JTAG_CONSOLE
- drv_jtag_console_init ();
-#endif
-#ifdef CONFIG_CBMEM_CONSOLE
- cbmemc_init();
+ drv_jtag_console_init();
#endif
+ if (IS_ENABLED(CONFIG_CBMEM_CONSOLE))
+ cbmemc_init();
return 0;
}
CONFIG_TARGET_M5249EVB=y
CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SYS_DEVICE_NULLDEV=y
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTOBOOT is not set
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_OF_TRANSLATE is not set
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
+CONFIG_SYS_DEVICE_NULLDEV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
CONFIG_VIDEO_FSL_DCU_FB=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_MTD=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_MTD=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x100000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x3D0000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_MII=y
CONFIG_VIDEO=y
# CONFIG_CFB_CONSOLE is not set
+CONFIG_SPLASH_SCREEN=y
CONFIG_MII=y
CONFIG_VIDEO=y
# CONFIG_CFB_CONSOLE is not set
+CONFIG_SPLASH_SCREEN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFF84000
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_DM_VIDEO=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_SHA1=y
CONFIG_SHA256=y
CONFIG_HEXDUMP=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_IS_IN_EEPROM=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_EEPROM=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_EEPROM=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASHIMAGE_GUARD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
CONFIG_IMX_WATCHDOG=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_BOOTMENU=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_PCI=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_ENV_OVERWRITE=y
CONFIG_WDT_MTK=y
CONFIG_LZO=y
CONFIG_HEXDUMP=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_MEDIATEK=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_STORAGE=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ERRNO_STR=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ERRNO_STR=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_VIDEO=y
CONFIG_CFB_CONSOLE_ANSI=y
# CONFIG_VGA_AS_SINGLE_DEVICE is not set
+CONFIG_SPLASH_SCREEN=y
# CONFIG_GZIP is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_FSL_USDHC=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
--- /dev/null
+CONFIG_ARM=y
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_OCTEONTX2=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ENV_OFFSET=0xF00000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_TARGET_OCTEONTX2_95XX=y
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BASE=0x87e028000000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus=6 rootwait rw root=/dev/mmcblk0p2 coherent_pool=16M"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Marvell> "
+# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x04000000
+CONFIG_SYS_MEMTEST_END=0x040f0000
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_BUS=y
+CONFIG_ENV_SPI_BUS=0
+CONFIG_USE_ENV_SPI_CS=y
+CONFIG_ENV_SPI_CS=0
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=125000000
+CONFIG_USE_ENV_SPI_MODE=y
+CONFIG_ENV_SPI_MODE=0x0
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_OCTEONTX=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=125000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_ETH=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
+CONFIG_PCI_SRIOV=y
+CONFIG_PCI_ARID=y
+CONFIG_PCI_OCTEONTX=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_WDT=y
+CONFIG_ERRNO_STR=y
--- /dev/null
+CONFIG_ARM=y
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_OCTEONTX2=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ENV_OFFSET=0xF00000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_TARGET_OCTEONTX2_96XX=y
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BASE=0x87e028000000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus=24 rootwait rw root=/dev/mmcblk0p2 coherent_pool=16M"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Marvell> "
+# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_BUS=y
+CONFIG_ENV_SPI_BUS=0
+CONFIG_USE_ENV_SPI_CS=y
+CONFIG_ENV_SPI_CS=0
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=125000000
+CONFIG_USE_ENV_SPI_MODE=y
+CONFIG_ENV_SPI_MODE=0x0
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_OCTEONTX=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=125000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_VITESSE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_E1000_SPI=y
+CONFIG_CMD_E1000=y
+CONFIG_NVME=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
+CONFIG_PCI_SRIOV=y
+CONFIG_PCI_ARID=y
+CONFIG_PCI_OCTEONTX=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_OCTEON_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_WDT=y
+CONFIG_ERRNO_STR=y
--- /dev/null
+CONFIG_ARM=y
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_OCTEONTX=y
+CONFIG_SYS_TEXT_BASE=0x2800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ENV_OFFSET=0xF00000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_TARGET_OCTEONTX_81XX=y
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BASE=0x87e028000000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus=4 rootwait rw root=/dev/sda2 coherent_pool=16M"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Marvell> "
+# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x2800000
+CONFIG_SYS_MEMTEST_END=0x28f0000
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_BUS=y
+CONFIG_ENV_SPI_BUS=0
+CONFIG_USE_ENV_SPI_CS=y
+CONFIG_ENV_SPI_CS=0
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=16000000
+CONFIG_USE_ENV_SPI_MODE=y
+CONFIG_ENV_SPI_MODE=0x0
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OCTEONTX=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=16000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_BROADCOM=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_VITESSE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_E1000_SPI=y
+CONFIG_CMD_E1000=y
+CONFIG_NVME=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
+CONFIG_PCI_SRIOV=y
+CONFIG_PCI_ARID=y
+CONFIG_PCI_OCTEONTX=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_WDT=y
+CONFIG_ERRNO_STR=y
--- /dev/null
+CONFIG_ARM=y
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_OCTEONTX=y
+CONFIG_SYS_TEXT_BASE=0x2800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ENV_OFFSET=0xF00000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_TARGET_OCTEONTX_83XX=y
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BASE=0x87e028000000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus=24 rootwait rw root=/dev/sda2 coherent_pool=16M"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Marvell> "
+# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_BUS=y
+CONFIG_ENV_SPI_BUS=0
+CONFIG_USE_ENV_SPI_CS=y
+CONFIG_ENV_SPI_CS=0
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=16000000
+CONFIG_USE_ENV_SPI_MODE=y
+CONFIG_ENV_SPI_MODE=0x0
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OCTEONTX=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=16000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_BROADCOM=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_VITESSE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_E1000_SPI=y
+CONFIG_CMD_E1000=y
+CONFIG_NVME=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
+CONFIG_PCI_SRIOV=y
+CONFIG_PCI_ARID=y
+CONFIG_PCI_OCTEONTX=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_WDT=y
+CONFIG_ERRNO_STR=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SMBIOS_MANUFACTURER="Hardkernel Co., Ltd."
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_DM_VIDEO=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_CI_UDC=y
CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_SYS_CONSOLE_BG_COL=0xff
CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_X86=y
CONFIG_SYS_TEXT_BASE=0xFFF00000
+CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_NR_DRAM_BANKS=8
CONFIG_ENV_SIZE=0x40000
CONFIG_MAX_CPUS=2
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT=y
CONFIG_SPL_OF_LIBFDT=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_SYS_CONSOLE_BG_COL=0xff
CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_VIDEO_NX_RGB=y
CONFIG_VIDEO_NX_LVDS=y
CONFIG_VIDEO_NX_HDMI=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_ERRNO_STR=y
CONFIG_VIDEO_SANDBOX_SDL=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_WDT=y
CONFIG_WDT_SANDBOX=y
CONFIG_FS_CBFS=y
CONFIG_DM_BOOTCOUNT_RTC=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
+CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y
CONFIG_CLK=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SANDBOX_CLK_CCF=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
CONFIG_PCI_SANDBOX=y
CONFIG_PHY=y
CONFIG_PHY_SANDBOX=y
CONFIG_VIDEO_DSI_HOST_SANDBOX=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_W1=y
CONFIG_W1_GPIO=y
CONFIG_W1_EEPROM=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
CONFIG_PCI_SANDBOX=y
CONFIG_PHY=y
CONFIG_PHY_SANDBOX=y
CONFIG_VIDEO_SANDBOX_SDL=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_FS_CBFS=y
CONFIG_FS_CRAMFS=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
CONFIG_CMD_FAT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
CONFIG_MTD=y
--- /dev/null
+CONFIG_RISCV=y
+CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_TARGET_SIPEED_MAIX=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_STACK_SIZE=0x100000
+# CONFIG_NET is not set
+# CONFIG_INPUT is not set
+# CONFIG_DM_ETH is not set
+# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
CONFIG_VIDEO_STM32=y
CONFIG_VIDEO_STM32_MAX_XRES=480
CONFIG_VIDEO_STM32_MAX_YRES=640
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=480
CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_TOTAL_COMPUTE=y
+CONFIG_SYS_TEXT_BASE=0xe0000000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x2a00000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_DEFAULT_DEVICE_TREE="total_compute"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_ANDROID_BOOT_IMAGE=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0 debug user_debug=31 earlycon=pl011,0x7ff80000 loglevel=9 androidboot.hardware=total_compute video=640x480-32@60 androidboot.boot_devices=1c050000.mmci ip=dhcp androidboot.selinux=permissive"
+# CONFIG_USE_BOOTCOMMAND is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_AVB_VERIFY=y
+CONFIG_AVB_BUF_ADDR=0x90000000
+CONFIG_AVB_BUF_SIZE=0x10000000
+CONFIG_SYS_PROMPT="TOTAL_COMPUTE# "
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EDITENV is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0xff000000
+CONFIG_CMD_ARMFLASH=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_MISC is not set
+CONFIG_CMD_AVB=y
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+# CONFIG_NET is not set
+CONFIG_CLK=y
+# CONFIG_MMC_WRITE is not set
+CONFIG_ARM_PL180_MMCI=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_LIBAVB=y
+CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_VIDEO_BPP32 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
+CONFIG_TARGET_XENGUEST_ARM64=y
CONFIG_SYS_TEXT_BASE=0x40080000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING=" xenguest"
-CONFIG_TARGET_XENGUEST_ARM64=y
CONFIG_BOOTDELAY=10
-
CONFIG_SYS_PROMPT="xenguest# "
-
-CONFIG_CMD_NET=n
-CONFIG_CMD_BDI=n
-CONFIG_CMD_BOOTD=n
-CONFIG_CMD_BOOTEFI=n
-CONFIG_CMD_BOOTEFI_HELLO_COMPILE=n
-CONFIG_CMD_ELF=n
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_PVBLOCK=y
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_GO=n
-CONFIG_CMD_RUN=n
-CONFIG_CMD_IMI=n
-CONFIG_CMD_IMLS=n
-CONFIG_CMD_XIMG=n
-CONFIG_CMD_EXPORTENV=n
-CONFIG_CMD_IMPORTENV=n
-CONFIG_CMD_EDITENV=n
-CONFIG_CMD_ENV_EXISTS=n
-CONFIG_CMD_MEMORY=y
-CONFIG_CMD_CRC32=n
-CONFIG_CMD_DM=n
-CONFIG_CMD_LOADB=n
-CONFIG_CMD_LOADS=n
-CONFIG_CMD_FLASH=n
-CONFIG_CMD_GPT=n
-CONFIG_CMD_FPGA=n
-CONFIG_CMD_ECHO=n
-CONFIG_CMD_ITEST=n
-CONFIG_CMD_SOURCE=n
-CONFIG_CMD_SETEXPR=n
-CONFIG_CMD_MISC=n
-CONFIG_CMD_UNZIP=n
-CONFIG_CMD_LZMADEC=n
-CONFIG_CMD_SAVEENV=n
-CONFIG_CMD_UMS=n
-
-CONFIG_CMD_PVBLOCK=y
-
-#CONFIG_USB=n
-# CONFIG_ISO_PARTITION is not set
-
-#CONFIG_EFI_PARTITION=y
-# CONFIG_EFI_LOADER is not set
-
+CONFIG_OF_BOARD=y
CONFIG_DM=y
# CONFIG_MMC is not set
-CONFIG_DM_SERIAL=y
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
-
-CONFIG_OF_BOARD=y
-CONFIG_OF_LIBFDT=y
+CONFIG_DM_SERIAL=y
+# CONFIG_EFI_LOADER is not set
CONFIG_CMD_FAT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NETCONSOLE=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=5
+CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SYS_PROMPT="Versal> "
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x0
+CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
+CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_CLK_ZYNQMP=y
+CONFIG_DFU_TFTP=y
CONFIG_DFU_RAM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
- When the console devices have been initialized, "stdout" and
"stderr" are set to "nulldev", so subsequent messages are
suppressed automatically. Make sure to enable "nulldev" by
- #defining CONFIG_SYS_DEVICE_NULLDEV in your board config file.
+ enabling CONFIG_SYS_DEVICE_NULLDEV in your board defconfig file.
- When booting a linux kernel, the "bootargs" are fixed up so that
the argument "console=" will be in the command line, no matter how
Err: serial@38000000
=>
+OpenSBI
+^^^^^^^
+
+OpenSBI is an open source supervisor execution environment implementing the
+RISC-V Supervisor Binary Interface Specification [1]. One of its features is
+to intercept run-time exceptions, e.g. for unaligned access or illegal
+instructions, and to emulate the failing instructions.
+
+The OpenSBI source can be downloaded via:
+
+.. code-block:: bash
+
+ git clone https://github.com/riscv/opensbi
+
+As OpenSBI will be loaded at 0x80000000 we have to adjust the U-Boot text base.
+Furthermore we have to enable building U-Boot for S-mode::
+
+ CONFIG_SYS_TEXT_BASE=0x80020000
+ CONFIG_RISCV_SMODE=y
+
+Both settings are contained in sipeed_maix_smode_defconfig so we can build
+U-Boot with:
+
+.. code-block:: bash
+
+ make sipeed_maix_smode_defconfig
+ make
+
+To build OpenSBI with U-Boot as a payload:
+
+.. code-block:: bash
+
+ cd opensbi
+ make \
+ PLATFORM=kendryte/k210 \
+ FW_PAYLOAD=y \
+ FW_PAYLOAD_OFFSET=0x20000 \
+ FW_PAYLOAD_PATH=<path to U-Boot>/u-boot-dtb.bin
+
+The value of FW_PAYLOAD_OFFSET must match CONFIG_SYS_TEXT_BASE - 0x80000000.
+
+The file to flash is build/platform/kendryte/k210/firmware/fw_payload.bin.
+
Loading Images
^^^^^^^^^^^^^^
interrupts)
0x8801f000 0x1000 credits
========== ========= ===========
+
+Links
+-----
+
+[1] https://github.com/riscv/riscv-sbi-doc
+ RISC-V Supervisor Binary Interface Specification
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Patrice Chotard <patrice.chotard@st.com>
+
+Binding/unbinding a driver
+==========================
+
+This document aims to describe the bind and unbind commands.
+
+For debugging purpose, it should be useful to bind or unbind a driver from
+the U-boot command line.
+
+The unbind command calls the remove device driver callback and unbind the
+device from its driver.
+
+The bind command binds a device to its driver.
+
+In some cases it can be useful to be able to bind a device to a driver from
+the command line.
+The obvious example is for versatile devices such as USB gadget.
+Another use case is when the devices are not yet ready at startup and
+require some setup before the drivers are bound (ex: FPGA which bitsream is
+fetched from a mass storage or ethernet)
+
+usage:
+
+bind <node path> <driver>
+bind <class> <index> <driver>
+
+unbind <node path>
+unbind <class> <index>
+unbind <class> <index> <driver>
+
+Where:
+ - <node path> is the node's device tree path
+ - <class> is one of the class available in the list given by the "dm uclass"
+ command or first column of "dm tree" command.
+ - <index> is the index of the parent's node (second column of "dm tree" output).
+ - <driver> is the driver name to bind given by the "dm drivers" command or the by
+ the fourth column of "dm tree" output.
+
+example:
+
+bind usb_dev_generic 0 usb_ether
+unbind usb_dev_generic 0 usb_ether
+or
+unbind eth 1
+
+bind /ocp/omap_dwc3@48380000/usb@48390000 usb_ether
+unbind /ocp/omap_dwc3@48380000/usb@48390000
.. toctree::
:maxdepth: 2
+ bind
debugging
design
ethernet
120832 bytes read in 7 ms (16.5 MiB/s)
=> bootefi ${kernel_addr_r} ${fdt_addr_r}
+The bootefi command uses the device, the file name, and the file size
+(environment variable 'filesize') of the most recently loaded file when setting
+up the binary for execution. So the UEFI binary should be loaded last.
+
The environment variable 'bootargs' is passed as load options in the UEFI system
table. The Linux kernel EFI stub uses the load options as command line
arguments.
Now in U-Boot install the keys on your board::
fatload mmc 0:1 <tmpaddr> PK.auth
- setenv -e -nv -bs -rt -at -i <tmpaddr>,$filesize PK
+ setenv -e -nv -bs -rt -at -i <tmpaddr>:$filesize PK
fatload mmc 0:1 <tmpaddr> KEK.auth
- setenv -e -nv -bs -rt -at -i <tmpaddr>,$filesize KEK
+ setenv -e -nv -bs -rt -at -i <tmpaddr>:$filesize KEK
fatload mmc 0:1 <tmpaddr> db.auth
- setenv -e -nv -bs -rt -at -i <tmpaddr>,$filesize db
+ setenv -e -nv -bs -rt -at -i <tmpaddr>:$filesize db
Set up boot parameters on your board::
Executing the boot manager
~~~~~~~~~~~~~~~~~~~~~~~~~~
-The UEFI specification foresees to define boot entries and boot sequence via UEFI
-variables. Booting according to these variables is possible via::
+The UEFI specification foresees to define boot entries and boot sequence via
+UEFI variables. Booting according to these variables is possible via::
bootefi bootmgr [fdt address]
-As of U-Boot v2018.03 UEFI variables are not persisted and cannot be set at
-runtime.
+As of U-Boot v2020.10 UEFI variables cannot be set at runtime. The U-Boot
+command 'efidebug' can be used to set the variables.
Executing the built in hello world application
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
onboard AHCI SATA.
If unsure, say N.
+
+config MTK_AHCI
+ bool "Enable Mediatek AHCI driver support"
+ depends on AHCI
+ help
+ Enable this driver to support Sata devices through
+ Mediatek AHCI controller (e.g. MT7622).
+
endmenu
obj-$(CONFIG_SANDBOX) += sata_sandbox.o
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o
obj-$(CONFIG_SUNXI_AHCI) += ahci_sunxi.o
+obj-$(CONFIG_MTK_AHCI) += mtk_ahci.o
int ahci_probe_scsi_pci(struct udevice *ahci_dev)
{
ulong base;
+ u16 vendor, device;
base = (ulong)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_5,
PCI_REGION_MEM);
+ /*
+ * Note:
+ * Right now, we have only one quirk here, which is not enough to
+ * introduce a new Kconfig option to select this. Once we have more
+ * quirks in this AHCI code, we should add a Kconfig option for
+ * this though.
+ */
+ dm_pci_read_config16(ahci_dev, PCI_VENDOR_ID, &vendor);
+ dm_pci_read_config16(ahci_dev, PCI_DEVICE_ID, &device);
+
+ if (vendor == PCI_VENDOR_ID_CAVIUM &&
+ device == PCI_DEVICE_ID_CAVIUM_SATA)
+ base = (uintptr_t)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_0,
+ PCI_REGION_MEM);
return ahci_probe_scsi(ahci_dev, base);
}
#endif
*/
board_ahci_enable();
- ahci_probe_scsi(dev, (ulong)devfdt_get_addr_ptr(dev));
+ ahci_probe_scsi(dev, dev_read_addr(dev));
return 0;
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MTK SATA platform driver
+ *
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/of_access.h>
+#include <generic-phy.h>
+#include <linux/err.h>
+#include <regmap.h>
+#include <reset.h>
+#include <sata.h>
+#include <scsi.h>
+#include <syscon.h>
+
+#define SYS_CFG 0x14
+#define SYS_CFG_SATA_MSK GENMASK(31, 30)
+#define SYS_CFG_SATA_EN BIT(31)
+
+struct mtk_ahci_priv {
+ void *base;
+
+ struct ahci_uc_priv ahci_priv;
+ struct regmap *mode;
+ struct reset_ctl_bulk rst_bulk;
+};
+
+static int mtk_ahci_bind(struct udevice *dev)
+{
+ struct udevice *scsi_dev;
+
+ return ahci_bind_scsi(dev, &scsi_dev);
+}
+
+static int mtk_ahci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct mtk_ahci_priv *priv = dev_get_priv(dev);
+
+ priv->base = devfdt_remap_addr_index(dev, 0);
+
+ return 0;
+}
+
+static int mtk_ahci_parse_property(struct ahci_uc_priv *hpriv,
+ struct udevice *dev)
+{
+ struct mtk_ahci_priv *plat = dev_get_priv(dev);
+ const void *fdt = gd->fdt_blob;
+
+ /* enable SATA function if needed */
+ if (fdt_get_property(fdt, dev_of_offset(dev),
+ "mediatek,phy-mode", NULL)) {
+ plat->mode = syscon_regmap_lookup_by_phandle(dev,
+ "mediatek,phy-mode");
+ if (IS_ERR(plat->mode)) {
+ dev_err(dev, "missing phy-mode phandle\n");
+ return PTR_ERR(plat->mode);
+ }
+ regmap_update_bits(plat->mode, SYS_CFG,
+ SYS_CFG_SATA_MSK, SYS_CFG_SATA_EN);
+ }
+
+ ofnode_read_u32(dev->node, "ports-implemented", &hpriv->port_map);
+ return 0;
+}
+
+static int mtk_ahci_probe(struct udevice *dev)
+{
+ struct mtk_ahci_priv *priv = dev_get_priv(dev);
+ int ret;
+ struct phy phy;
+
+ ret = mtk_ahci_parse_property(&priv->ahci_priv, dev);
+ if (ret)
+ return ret;
+
+ ret = reset_get_bulk(dev, &priv->rst_bulk);
+ if (!ret) {
+ reset_assert_bulk(&priv->rst_bulk);
+ reset_deassert_bulk(&priv->rst_bulk);
+ } else {
+ dev_err(dev, "Failed to get reset: %d\n", ret);
+ }
+
+ ret = generic_phy_get_by_name(dev, "sata-phy", &phy);
+ if (ret) {
+ pr_err("can't get the phy from DT\n");
+ return ret;
+ }
+
+ ret = generic_phy_init(&phy);
+ if (ret) {
+ pr_err("unable to initialize the sata phy\n");
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&phy);
+ if (ret) {
+ pr_err("unable to power on the sata phy\n");
+ return ret;
+ }
+
+ return ahci_probe_scsi(dev, (ulong)priv->base);
+}
+
+static const struct udevice_id mtk_ahci_ids[] = {
+ { .compatible = "mediatek,mtk-ahci" },
+ { }
+};
+
+U_BOOT_DRIVER(mtk_ahci) = {
+ .name = "mtk_ahci",
+ .id = UCLASS_AHCI,
+ .of_match = mtk_ahci_ids,
+ .bind = mtk_ahci_bind,
+ .ofdata_to_platdata = mtk_ahci_ofdata_to_platdata,
+ .ops = &scsi_ops,
+ .probe = mtk_ahci_probe,
+ .priv_auto_alloc_size = sizeof(struct mtk_ahci_priv),
+};
{
struct ast2500_clk_priv *priv = dev_get_priv(dev);
- priv->scu = devfdt_get_addr_ptr(dev);
- if (IS_ERR(priv->scu))
- return PTR_ERR(priv->scu);
+ priv->scu = dev_read_addr_ptr(dev);
+ if (!priv->scu)
+ return -EINVAL;
return 0;
}
dev = dev_get_parent(dev);
- plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev);
+ plat->reg_base = dev_read_addr_ptr(dev);
return 0;
}
dev_periph_container = dev_get_parent(dev);
dev_pmc = dev_get_parent(dev_periph_container);
- plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev_pmc);
+ plat->reg_base = dev_read_addr_ptr(dev_pmc);
return 0;
}
}
clk = &composite->clk;
+ clk->flags = flags;
ret = clk_register(clk, UBOOT_DM_CLK_COMPOSITE, name,
parent_names[clk_composite_get_parent(clk)]);
if (ret) {
/* register the clock */
clk = &div->clk;
+ clk->flags = flags;
ret = clk_register(clk, UBOOT_DM_CLK_CCF_DIVIDER, name, parent_name);
if (ret) {
fix->mult = mult;
fix->div = div;
clk = &fix->clk;
+ clk->flags = flags;
ret = clk_register(clk, UBOOT_DM_CLK_IMX_FIXED_FACTOR, name,
parent_name);
#endif
clk = &gate->clk;
+ clk->flags = flags;
ret = clk_register(clk, UBOOT_DM_CLK_GATE, name, parent_name);
if (ret) {
*/
#include <common.h>
-#include <asm/io.h>
-#include <malloc.h>
+#include <clk.h>
#include <clk-uclass.h>
#include <dm/device.h>
#include <dm/devres.h>
+#include <dm/uclass.h>
#include <linux/bitops.h>
+#include <malloc.h>
+#include <asm/io.h>
#include <linux/clk-provider.h>
-#include <clk.h>
-#include "clk.h"
#include <linux/err.h>
+#include "clk.h"
#define UBOOT_DM_CLK_CCF_MUX "ccf_clk_mux"
if (mux->flags & CLK_MUX_HIWORD_MASK) {
reg = mux->mask << (mux->shift + 16);
} else {
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ reg = mux->io_mux_val;
+#else
reg = readl(mux->reg);
+#endif
reg &= ~(mux->mask << mux->shift);
}
val = val << mux->shift;
reg |= val;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ mux->io_mux_val = reg;
+#else
writel(reg, mux->reg);
+#endif
return 0;
}
+static ulong clk_mux_get_rate(struct clk *clk)
+{
+ struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
+ dev_get_clk_ptr(clk->dev) : clk);
+ struct udevice *parent;
+ struct clk *pclk;
+ int err, index;
+
+ index = clk_mux_get_parent(clk);
+ if (index >= mux->num_parents)
+ return -EFAULT;
+
+ err = uclass_get_device_by_name(UCLASS_CLK, mux->parent_names[index],
+ &parent);
+ if (err)
+ return err;
+
+ pclk = dev_get_clk_ptr(parent);
+ if (!pclk)
+ return -ENODEV;
+
+ return clk_get_rate(pclk);
+}
+
const struct clk_ops clk_mux_ops = {
- .get_rate = clk_generic_get_rate,
+ .get_rate = clk_mux_get_rate,
.set_parent = clk_mux_set_parent,
};
#endif
clk = &mux->clk;
+ clk->flags = flags;
/*
* Read the current mux setup - so we assign correct parent.
*
* Changing parent would require changing internals of udevice struct
- * for the corresponding clock (to do that define .set_parent() method.
+ * for the corresponding clock (to do that define .set_parent() method).
*/
ret = clk_register(clk, UBOOT_DM_CLK_CCF_MUX, name,
parent_names[clk_mux_get_parent(clk)]);
ret = uclass_get_device_by_name(UCLASS_CLK, parent_name, &parent);
if (ret) {
- printf("%s: name: %s parent: %s [0x%p]\n",
- __func__, name, parent->name, parent);
+ printf("%s: failed to get %s device (parent of %s)\n",
+ __func__, parent_name, name);
+ } else {
+ debug("%s: name: %s parent: %s [0x%p]\n", __func__, name,
+ parent->name, parent);
}
- debug("%s: name: %s parent: %s [0x%p]\n", __func__, name, parent->name,
- parent);
-
drv = lists_driver_lookup_name(drv_name);
if (!drv) {
printf("%s: %s is not a valid driver name\n",
gate->state = 0;
clk = &gate->clk;
+ clk->flags = flags;
ret = clk_register(clk, "sandbox_clk_gate2", name, parent_name);
if (ret) {
clk_dm(SANDBOX_CLK_ECSPI_ROOT,
sandbox_clk_divider("ecspi_root", "pll3_60m", ®, 19, 6));
+ reg = 0;
+ clk_dm(SANDBOX_CLK_ECSPI0,
+ sandbox_clk_gate("ecspi0", "ecspi_root", ®, 0, 0));
+
clk_dm(SANDBOX_CLK_ECSPI1,
sandbox_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0));
reg = BIT(28) | BIT(24) | BIT(16);
clk_dm(SANDBOX_CLK_I2C,
sandbox_clk_composite("i2c", i2c_sels, ARRAY_SIZE(i2c_sels),
- ®, 0));
+ ®, CLK_SET_RATE_UNGATE));
clk_dm(SANDBOX_CLK_I2C_ROOT,
sandbox_clk_gate2("i2c_root", "i2c", base + 0x7c, 0));
#define CLOCK_NODE_TYPE_DIV 4
#define CLOCK_NODE_TYPE_GATE 6
-enum pm_query_id {
- PM_QID_INVALID,
- PM_QID_CLOCK_GET_NAME,
- PM_QID_CLOCK_GET_TOPOLOGY,
- PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
- PM_QID_CLOCK_GET_PARENTS,
- PM_QID_CLOCK_GET_ATTRIBUTES,
- PM_QID_PINCTRL_GET_NUM_PINS,
- PM_QID_PINCTRL_GET_NUM_FUNCTIONS,
- PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS,
- PM_QID_PINCTRL_GET_FUNCTION_NAME,
- PM_QID_PINCTRL_GET_FUNCTION_GROUPS,
- PM_QID_PINCTRL_GET_PIN_GROUPS,
- PM_QID_CLOCK_GET_NUM_CLOCKS,
- PM_QID_CLOCK_GET_MAX_DIVISOR,
-};
-
enum clk_type {
CLK_TYPE_OUTPUT,
CLK_TYPE_EXTERNAL,
uint n, foutiic, fvcoiic, mint;
u64 mfrac;
- n = (2215000000U + fout / 2) / fout;
if (fout < 417000000U)
n = 2 * ((2215000000U / 2 + fout / 2) / fout);
else
imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0));
clk_dm(IMX6QDL_CLK_PLL2_PFD2_396M,
imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2));
+ clk_dm(IMX6QDL_CLK_PLL6,
+ imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "osc", base + 0xe0, 0x3));
+ clk_dm(IMX6QDL_CLK_PLL6_ENET,
+ imx_clk_gate("pll6_enet", "pll6", base + 0xe0, 13));
/* CCM clocks */
base = dev_read_addr_ptr(dev);
clk_dm(IMX6QDL_CLK_I2C2,
imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8));
+ clk_dm(IMX6QDL_CLK_ENET, imx_clk_gate2("enet", "ipg", base + 0x6c, 10));
+ clk_dm(IMX6QDL_CLK_ENET_REF,
+ imx_clk_fixed_factor("enet_ref", "pll6_enet", 1, 1));
+
return 0;
}
#define UBOOT_DM_CLK_IMX_PLLV3_SYS "imx_clk_pllv3_sys"
#define UBOOT_DM_CLK_IMX_PLLV3_USB "imx_clk_pllv3_usb"
#define UBOOT_DM_CLK_IMX_PLLV3_AV "imx_clk_pllv3_av"
+#define UBOOT_DM_CLK_IMX_PLLV3_ENET "imx_clk_pllv3_enet"
#define PLL_NUM_OFFSET 0x10
#define PLL_DENOM_OFFSET 0x20
u32 enable_bit;
u32 div_mask;
u32 div_shift;
+ unsigned long ref_clock;
};
#define to_clk_pllv3(_clk) container_of(_clk, struct clk_pllv3, clk)
.set_rate = clk_pllv3_av_set_rate,
};
+static ulong clk_pllv3_enet_get_rate(struct clk *clk)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(clk);
+
+ return pll->ref_clock;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+ .enable = clk_pllv3_generic_enable,
+ .disable = clk_pllv3_generic_disable,
+ .get_rate = clk_pllv3_enet_get_rate,
+};
+
struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
const char *parent_name, void __iomem *base,
u32 div_mask)
pll->div_shift = 0;
pll->powerup_set = false;
break;
+ case IMX_PLLV3_ENET:
+ drv_name = UBOOT_DM_CLK_IMX_PLLV3_ENET;
+ pll->ref_clock = 500000000;
+ break;
default:
kfree(pll);
return ERR_PTR(-ENOTSUPP);
.ops = &clk_pllv3_av_ops,
.flags = DM_FLAG_PRE_RELOC,
};
+
+U_BOOT_DRIVER(clk_pllv3_enet) = {
+ .name = UBOOT_DM_CLK_IMX_PLLV3_ENET,
+ .id = UCLASS_CLK,
+ .ops = &clk_pllv3_enet_ops,
+};
GATE_PERI1(CLK_PERI_IRTX_PD, CLK_TOP_IRTX_SEL, 2),
};
+/* pciesys */
+static const struct mtk_gate_regs pcie_cg_regs = {
+ .set_ofs = 0x30,
+ .clr_ofs = 0x30,
+ .sta_ofs = 0x30,
+};
+
+#define GATE_PCIE(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &pcie_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_NO_SETCLR_INV | CLK_PARENT_TOPCKGEN, \
+ }
+
+static const struct mtk_gate pcie_cgs[] = {
+ GATE_PCIE(CLK_PCIE_P1_AUX_EN, CLK_TOP_P1_1MHZ, 12),
+ GATE_PCIE(CLK_PCIE_P1_OBFF_EN, CLK_TOP_4MHZ, 13),
+ GATE_PCIE(CLK_PCIE_P1_AHB_EN, CLK_TOP_AXI_SEL, 14),
+ GATE_PCIE(CLK_PCIE_P1_AXI_EN, CLK_TOP_HIF_SEL, 15),
+ GATE_PCIE(CLK_PCIE_P1_MAC_EN, CLK_TOP_PCIE1_MAC_EN, 16),
+ GATE_PCIE(CLK_PCIE_P1_PIPE_EN, CLK_TOP_PCIE1_PIPE_EN, 17),
+ GATE_PCIE(CLK_PCIE_P0_AUX_EN, CLK_TOP_P0_1MHZ, 18),
+ GATE_PCIE(CLK_PCIE_P0_OBFF_EN, CLK_TOP_4MHZ, 19),
+ GATE_PCIE(CLK_PCIE_P0_AHB_EN, CLK_TOP_AXI_SEL, 20),
+ GATE_PCIE(CLK_PCIE_P0_AXI_EN, CLK_TOP_HIF_SEL, 21),
+ GATE_PCIE(CLK_PCIE_P0_MAC_EN, CLK_TOP_PCIE0_MAC_EN, 22),
+ GATE_PCIE(CLK_PCIE_P0_PIPE_EN, CLK_TOP_PCIE0_PIPE_EN, 23),
+ GATE_PCIE(CLK_SATA_AHB_EN, CLK_TOP_AXI_SEL, 26),
+ GATE_PCIE(CLK_SATA_AXI_EN, CLK_TOP_HIF_SEL, 27),
+ GATE_PCIE(CLK_SATA_ASIC_EN, CLK_TOP_SATA_ASIC, 28),
+ GATE_PCIE(CLK_SATA_RBC_EN, CLK_TOP_SATA_RBC, 29),
+ GATE_PCIE(CLK_SATA_PM_EN, CLK_TOP_UNIVPLL2_D4, 30),
+};
+
/* ethsys */
static const struct mtk_gate_regs eth_cg_regs = {
.sta_ofs = 0x30,
.flags = CLK_GATE_NO_SETCLR_INV | CLK_PARENT_TOPCKGEN, \
}
+static const struct mtk_gate_regs ssusb_cg_regs = {
+ .set_ofs = 0x30,
+ .clr_ofs = 0x30,
+ .sta_ofs = 0x30,
+};
+
+#define GATE_SSUSB(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &ssusb_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_NO_SETCLR_INV | CLK_PARENT_TOPCKGEN, \
+}
+
static const struct mtk_gate sgmii_cgs[] = {
GATE_SGMII(CLK_SGMII_TX250M_EN, CLK_TOP_SSUSB_TX250M, 2),
GATE_SGMII(CLK_SGMII_RX250M_EN, CLK_TOP_SSUSB_EQ_RX250M, 3),
GATE_SGMII(CLK_SGMII_CDR_FB, CLK_TOP_SSUSB_CDR_FB, 5),
};
+static const struct mtk_gate ssusb_cgs[] = {
+ GATE_SSUSB(CLK_SSUSB_U2_PHY_1P_EN, CLK_TOP_TO_U2_PHY_1P, 0),
+ GATE_SSUSB(CLK_SSUSB_U2_PHY_EN, CLK_TOP_TO_U2_PHY, 1),
+ GATE_SSUSB(CLK_SSUSB_REF_EN, CLK_TOP_TO_USB3_REF, 5),
+ GATE_SSUSB(CLK_SSUSB_SYS_EN, CLK_TOP_TO_USB3_SYS, 6),
+ GATE_SSUSB(CLK_SSUSB_MCU_EN, CLK_TOP_AXI_SEL, 7),
+ GATE_SSUSB(CLK_SSUSB_DMA_EN, CLK_TOP_HIF_SEL, 8),
+};
+
static const struct mtk_clk_tree mt7622_clk_tree = {
.xtal_rate = 25 * MHZ,
.xtal2_rate = 25 * MHZ,
return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, peri_cgs);
}
+static int mt7622_pciesys_probe(struct udevice *dev)
+{
+ return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, pcie_cgs);
+}
+
+static int mt7622_pciesys_bind(struct udevice *dev)
+{
+ int ret = 0;
+
+ if (IS_ENABLED(CONFIG_RESET_MEDIATEK)) {
+ ret = mediatek_reset_bind(dev, ETHSYS_HIFSYS_RST_CTRL_OFS, 1);
+ if (ret)
+ debug("Warning: failed to bind reset controller\n");
+ }
+
+ return ret;
+}
+
static int mt7622_ethsys_probe(struct udevice *dev)
{
return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, eth_cgs);
return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, sgmii_cgs);
}
+static int mt7622_ssusbsys_probe(struct udevice *dev)
+{
+ return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, ssusb_cgs);
+}
+
static const struct udevice_id mt7622_apmixed_compat[] = {
{ .compatible = "mediatek,mt7622-apmixedsys" },
{ }
{ }
};
+static const struct udevice_id mt7622_pciesys_compat[] = {
+ { .compatible = "mediatek,mt7622-pciesys", },
+ { }
+};
+
static const struct udevice_id mt7622_ethsys_compat[] = {
{ .compatible = "mediatek,mt7622-ethsys", },
{ }
{ }
};
+static const struct udevice_id mt7622_ssusbsys_compat[] = {
+ { .compatible = "mediatek,mt7622-ssusbsys" },
+ { }
+};
+
U_BOOT_DRIVER(mtk_mcucfg) = {
.name = "mt7622-mcucfg",
.id = UCLASS_SYSCON,
.flags = DM_FLAG_PRE_RELOC,
};
+U_BOOT_DRIVER(mtk_clk_pciesys) = {
+ .name = "mt7622-clock-pciesys",
+ .id = UCLASS_CLK,
+ .of_match = mt7622_pciesys_compat,
+ .probe = mt7622_pciesys_probe,
+ .bind = mt7622_pciesys_bind,
+ .priv_auto_alloc_size = sizeof(struct mtk_cg_priv),
+ .ops = &mtk_clk_gate_ops,
+};
+
U_BOOT_DRIVER(mtk_clk_ethsys) = {
.name = "mt7622-clock-ethsys",
.id = UCLASS_CLK,
.priv_auto_alloc_size = sizeof(struct mtk_cg_priv),
.ops = &mtk_clk_gate_ops,
};
+
+U_BOOT_DRIVER(mtk_clk_ssusbsys) = {
+ .name = "mt7622-clock-ssusbsys",
+ .id = UCLASS_CLK,
+ .of_match = mt7622_ssusbsys_compat,
+ .probe = mt7622_ssusbsys_probe,
+ .priv_auto_alloc_size = sizeof(struct mtk_cg_priv),
+ .ops = &mtk_clk_gate_ops,
+};
void *devfdt_get_addr_ptr(const struct udevice *dev)
{
- return (void *)(uintptr_t)devfdt_get_addr_index(dev, 0);
+ fdt_addr_t addr = devfdt_get_addr_index(dev, 0);
+
+ return (addr == FDT_ADDR_T_NONE) ? NULL : (void *)(uintptr_t)addr;
}
void *devfdt_remap_addr_index(const struct udevice *dev, int index)
int ofnode_read_addr_cells(ofnode node)
{
- if (ofnode_is_np(node))
+ if (ofnode_is_np(node)) {
return of_n_addr_cells(ofnode_to_np(node));
- else /* NOTE: this call should walk up the parent stack */
- return fdt_address_cells(gd->fdt_blob, ofnode_to_offset(node));
+ } else {
+ int parent = fdt_parent_offset(gd->fdt_blob,
+ ofnode_to_offset(node));
+
+ return fdt_address_cells(gd->fdt_blob, parent);
+ }
}
int ofnode_read_size_cells(ofnode node)
{
- if (ofnode_is_np(node))
+ if (ofnode_is_np(node)) {
return of_n_size_cells(ofnode_to_np(node));
- else /* NOTE: this call should walk up the parent stack */
- return fdt_size_cells(gd->fdt_blob, ofnode_to_offset(node));
+ } else {
+ int parent = fdt_parent_offset(gd->fdt_blob,
+ ofnode_to_offset(node));
+
+ return fdt_size_cells(gd->fdt_blob, parent);
+ }
}
int ofnode_read_simple_addr_cells(ofnode node)
#include <mapmem.h>
#include <asm/types.h>
#include <asm/io.h>
+#include <linux/ioport.h>
int dev_read_u32(const struct udevice *dev, const char *propname, u32 *outp)
{
{
return ofnode_get_child_count(dev_ofnode(dev));
}
+
+int dev_read_pci_bus_range(const struct udevice *dev,
+ struct resource *res)
+{
+ const u32 *values;
+ int len;
+
+ values = dev_read_prop(dev, "bus-range", &len);
+ if (!values || len < sizeof(*values) * 2)
+ return -EINVAL;
+
+ res->start = *values++;
+ res->end = *values;
+
+ return 0;
+}
if (!(zynqmp_power.tx_chan.dev) || !(&zynqmp_power.rx_chan.dev))
return -EINVAL;
+ debug("%s, Sending IPI message with ID: 0x%0x\n", __func__, req[0]);
msg.buf = (u32 *)req;
msg.len = req_len;
ret = mbox_send(&zynqmp_power.tx_chan, &msg);
return ret;
}
-static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
-{
- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3)
- return ipi_req(req, req_len, res, res_maxlen);
-
- return xilinx_pm_request(req[0], 0, 0, 0, 0, res);
-}
-
unsigned int zynqmp_firmware_version(void)
{
int ret;
* asking PMUFW again.
**/
if (pm_api_version == ZYNQMP_PM_VERSION_INVALID) {
- const u32 request[] = { PM_GET_API_VERSION };
- ret = send_req(request, ARRAY_SIZE(request), ret_payload, 2);
+ ret = xilinx_pm_request(PM_GET_API_VERSION, 0, 0, 0, 0,
+ ret_payload);
if (ret)
panic("PMUFW is not found - Please load it!\n");
*/
void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
{
- const u32 request[] = {
- PM_SET_CONFIGURATION,
- (u32)((u64)cfg_obj)
- };
- u32 response = 0;
int err;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
printf("Loading new PMUFW cfg obj (%ld bytes)\n", size);
- err = send_req(request, ARRAY_SIZE(request), &response, 1);
+ err = xilinx_pm_request(PM_SET_CONFIGURATION, (u32)(u64)cfg_obj, 0, 0,
+ 0, ret_payload);
if (err == XST_PM_NO_ACCESS) {
printf("PMUFW no permission to change config object\n");
return;
if (err)
printf("Cannot load PMUFW configuration object (%d)\n", err);
- if (response)
- printf("PMUFW returned 0x%08x status!\n", response);
+ if (ret_payload[0])
+ printf("PMUFW returned 0x%08x status!\n", ret_payload[0]);
- if ((err || response) && IS_ENABLED(CONFIG_SPL_BUILD))
+ if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_SPL_BUILD))
panic("PMUFW config object loading failed in EL3\n");
}
int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
u32 arg3, u32 *ret_payload)
{
- /*
- * Added SIP service call Function Identifier
- * Make sure to stay in x0 register
- */
- struct pt_regs regs;
+ debug("%s at EL%d, API ID: 0x%0x\n", __func__, current_el(), api_id);
- if (current_el() == 3) {
- printf("%s: Can't call SMC from EL3 context\n", __func__);
+ if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
+#if defined(CONFIG_ZYNQMP_IPI)
+ /*
+ * Use fixed payload and arg size as the EL2 call. The firmware
+ * is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the
+ * firmware API is limited by the SMC call size
+ */
+ u32 regs[] = {api_id, arg0, arg1, arg2, arg3};
+
+ ipi_req(regs, PAYLOAD_ARG_CNT, ret_payload, PAYLOAD_ARG_CNT);
+#else
return -EPERM;
- }
-
- regs.regs[0] = PM_SIP_SVC | api_id;
- regs.regs[1] = ((u64)arg1 << 32) | arg0;
- regs.regs[2] = ((u64)arg3 << 32) | arg2;
-
- smc_call(®s);
+#endif
+ } else {
+ /*
+ * Added SIP service call Function Identifier
+ * Make sure to stay in x0 register
+ */
+ struct pt_regs regs;
+
+ regs.regs[0] = PM_SIP_SVC | api_id;
+ regs.regs[1] = ((u64)arg1 << 32) | arg0;
+ regs.regs[2] = ((u64)arg3 << 32) | arg2;
+
+ smc_call(®s);
+
+ if (ret_payload) {
+ ret_payload[0] = (u32)regs.regs[0];
+ ret_payload[1] = upper_32_bits(regs.regs[0]);
+ ret_payload[2] = (u32)regs.regs[1];
+ ret_payload[3] = upper_32_bits(regs.regs[1]);
+ ret_payload[4] = (u32)regs.regs[2];
+ }
- if (ret_payload) {
- ret_payload[0] = (u32)regs.regs[0];
- ret_payload[1] = upper_32_bits(regs.regs[0]);
- ret_payload[2] = (u32)regs.regs[1];
- ret_payload[3] = upper_32_bits(regs.regs[1]);
- ret_payload[4] = (u32)regs.regs[2];
}
-
- return regs.regs[0];
+ return (ret_payload) ? ret_payload[0] : 0;
}
static const struct udevice_id zynqmp_firmware_ids[] = {
#include <linux/errno.h>
#include <linux/printk.h>
#include <linux/psci.h>
+#include <asm/system.h>
#define DRIVER_NAME "psci"
{
const char *method;
+#if defined(CONFIG_ARM64)
+ if (current_el() == 3)
+ return -EINVAL;
+#endif
+
method = ofnode_read_string(dev_ofnode(dev), "method");
if (!method) {
pr_warn("missing \"method\" property\n");
ulong bin_buf;
int ret;
u32 buf_lo, buf_hi;
- u32 ret_payload[5];
+ u32 ret_payload[PAYLOAD_ARG_CNT];
bin_buf = versal_align_dma_buffer((ulong *)buf, bsize);
config ZYNQ_GPIO
bool "Zynq GPIO driver"
- depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
- default y
+ depends on DM_GPIO
+ default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
help
Supports GPIO access on Zynq SoC.
clk_free(&clk);
#if CONFIG_IS_ENABLED(OF_CONTROL)
- plat->base_addr = (uint32_t)devfdt_get_addr_ptr(dev);
+ plat->base_addr = dev_read_addr(dev);
#endif
plat->bank_name = at91_get_bank_name(plat->base_addr);
port->regs = (struct at91_port *)plat->base_addr;
u32 shift, bit_per_gpio, activate, deactivate, gpio_count;
const u8 *defaults;
- hcg->regs = (u32 *)devfdt_get_addr_ptr(dev);
+ hcg->regs = dev_read_addr_ptr(dev);
gpio_count = dev_read_u32_default(dev, "gpio-count", 1);
shift = dev_read_u32_default(dev, "gpio-first-shift", 0);
bit_per_gpio = dev_read_u32_default(dev, "gpio-bit-per-line", 1);
config SYS_I2C_CADENCE
tristate "Cadence I2C Controller"
- depends on DM_I2C && (ARCH_ZYNQ || ARM64)
+ depends on DM_I2C
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
obj-$(CONFIG_SYS_I2C_XILINX_XIIC) += xilinx_xiic.o
obj-$(CONFIG_TEGRA186_BPMP_I2C) += tegra186_bpmp_i2c.o
-obj-$(CONFIG_I2C_MUX) += muxes/
+obj-$(CONFIG_$(SPL_)I2C_MUX) += muxes/
struct ast_i2c_priv *priv = dev_get_priv(dev);
int ret;
- priv->regs = devfdt_get_addr_ptr(dev);
- if (IS_ERR(priv->regs))
- return PTR_ERR(priv->regs);
+ priv->regs = dev_read_addr_ptr(dev);
+ if (!priv->regs)
+ return -EINVAL;
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0) {
int ret;
if (!priv->regs)
- priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus);
+ priv->regs = dev_read_addr_ptr(bus);
dev_read_u32(bus, "i2c-scl-rising-time-ns", &priv->scl_rise_time_ns);
dev_read_u32(bus, "i2c-scl-falling-time-ns", &priv->scl_fall_time_ns);
dev_read_u32(bus, "i2c-sda-hold-time-ns", &priv->sda_hold_time_ns);
#
# Copyright (c) 2015 Google, Inc
obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o
-obj-$(CONFIG_$(SPL_)I2C_MUX) += i2c-mux-uclass.o
+obj-$(CONFIG_I2C_MUX) += i2c-mux-uclass.o
obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
{
struct mv_i2c_priv *priv = dev_get_priv(bus);
- priv->base = (void *)devfdt_get_addr_ptr(bus);
+ priv->base = dev_read_addr_ptr(bus);
return 0;
}
{
struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
- dev->base = devfdt_get_addr_ptr(bus);
+ dev->base = dev_read_addr_ptr(bus);
if (!dev->base)
return -ENOMEM;
static int mvtwsi_i2c_bind(struct udevice *bus)
{
- struct mvtwsi_registers *twsi = devfdt_get_addr_ptr(bus);
+ struct mvtwsi_registers *twsi = dev_read_addr_ptr(bus);
/* Disable the hidden slave in i2c0 of these platforms */
if ((IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARCH_KIRKWOOD))
* Copyright (C) 2018 Marvell International Ltd.
*/
-#include <common.h>
#include <clk.h>
#include <dm.h>
#include <i2c.h>
-#include <pci_ids.h>
+#include <time.h>
#include <asm/io.h>
#include <linux/bitfield.h>
#include <linux/compat.h>
return 0;
}
+static const struct octeon_i2c_data i2c_octeon_data = {
+ .probe = PROBE_DT,
+ .reg_offs = 0x0000,
+ .thp = 3,
+ .clk_method = CLK_METHOD_OCTEON,
+};
+
+static const struct octeon_i2c_data i2c_octeontx_data = {
+ .probe = PROBE_PCI,
+ .reg_offs = 0x1000,
+ .thp = 24,
+ .clk_method = CLK_METHOD_OCTEON,
+};
+
+static const struct octeon_i2c_data i2c_octeontx2_data = {
+ .probe = PROBE_PCI,
+ .reg_offs = 0x1000,
+ .thp = 3,
+ .clk_method = CLK_METHOD_OCTEONTX2,
+};
+
/**
* Driver probe function
*
u32 i2c_slave_addr;
int ret;
+ /* Octeon TX2 needs a different data struct */
+ if (device_is_compatible(dev, "cavium,thunderx-i2c"))
+ dev->driver_data = (long)&i2c_octeontx2_data;
+
twsi->data = (const struct octeon_i2c_data *)dev_get_driver_data(dev);
if (twsi->data->probe == PROBE_PCI) {
.set_bus_speed = octeon_i2c_set_bus_speed,
};
-static const struct octeon_i2c_data i2c_octeon_data = {
- .probe = PROBE_DT,
- .reg_offs = 0x0000,
- .thp = 3,
- .clk_method = CLK_METHOD_OCTEON,
-};
-
-static const struct octeon_i2c_data i2c_octeontx_data = {
- .probe = PROBE_PCI,
- .reg_offs = 0x8000,
- .thp = 3,
- .clk_method = CLK_METHOD_OCTEON,
-};
-
-static const struct octeon_i2c_data i2c_octeontx2_data = {
- .probe = PROBE_PCI,
- .reg_offs = 0x8000,
- .thp = 24,
- .clk_method = CLK_METHOD_OCTEONTX2,
-};
-
static const struct udevice_id octeon_i2c_ids[] = {
{ .compatible = "cavium,octeon-7890-twsi",
.data = (ulong)&i2c_octeon_data },
{ .compatible = "cavium,thunder-8890-twsi",
.data = (ulong)&i2c_octeontx_data },
- { .compatible = "cavium,thunder2-99xx-twsi",
- .data = (ulong)&i2c_octeontx2_data },
{ }
};
.priv_auto_alloc_size = sizeof(struct octeon_twsi),
.ops = &octeon_i2c_ops,
};
-
-static struct pci_device_id octeon_twsi_supported[] = {
- { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_TWSI),
- .driver_data = (ulong)&i2c_octeontx2_data },
- { },
-};
-
-U_BOOT_PCI_DEVICE(octeon_pci_twsi, octeon_twsi_supported);
struct ipi_int_regs {
u32 trig; /* 0x0 */
u32 obs; /* 0x4 */
- u32 ist; /* 0x8 */
- u32 imr; /* 0xC */
- u32 ier; /* 0x10 */
- u32 idr; /* 0x14 */
+ u32 dummy0;
+ u32 dummy1;
+ u32 isr; /* 0x10 */
+ u32 imr; /* 0x14 */
+ u32 ier; /* 0x18 */
+ u32 idr; /* 0x1C */
};
#define ipi_int_apu ((struct ipi_int_regs *)IPI_INT_REG_BASE_APU)
struct zynqmp_ipi *zynqmp = dev_get_priv(chan->dev);
u32 *mbx = (u32 *)zynqmp->local_res_regs;
+ /*
+ * PMU Firmware does not trigger IPI interrupt for API call responses so
+ * there is no need to check ISR flags
+ */
for (size_t i = 0; i < msg->len; i++)
msg->buf[i] = readl(&mbx[i]);
static int i2c_eeprom_partition_ofdata_to_platdata(struct udevice *dev)
{
struct i2c_eeprom_partition *priv = dev_get_priv(dev);
- u32 offset, size;
+ u32 reg[2];
int ret;
- ret = dev_read_u32(dev, "offset", &offset);
+ ret = dev_read_u32_array(dev, "reg", reg, 2);
if (ret)
return ret;
- ret = dev_read_u32(dev, "size", &size);
- if (ret)
- return ret;
+ if (!reg[1])
+ return -EINVAL;
+
+ priv->offset = reg[0];
+ priv->size = reg[1];
- priv->offset = offset;
- priv->size = size;
+ debug("%s: base %x, size %x\n", __func__, priv->offset, priv->size);
return 0;
}
This selects PCI-based MMC controllers.
If you have an MMC controller on a PCI bus, say Y here.
+config MMC_OCTEONTX
+ bool "Marvell OcteonTX Multimedia Card Interface support"
+ depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ depends on DM_MMC
+ help
+ This selects the OcteonTX Multimedia card Interface.
+ If you have an OcteonTX/TX2 board with a Multimedia Card slot,
+ say Y here.
+
If unsure, say N.
config PXA_MMC_GENERIC
config MMC_SDHCI_ZYNQ
bool "Arasan SDHCI controller support"
- depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
depends on DM_MMC && OF_CONTROL && BLK
depends on MMC_SDHCI
help
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_MXS) += mxsmmc.o
+obj-$(CONFIG_MMC_OCTEONTX) += octeontx_hsmmc.o
obj-$(CONFIG_MMC_PCI) += pci_mmc.o
obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
obj-$(CONFIG_$(SPL_TPL_)SUPPORT_EMMC_RPMB) += rpmb.o
if (ret)
return ret;
- plat->mci = (struct atmel_mci *)devfdt_get_addr_ptr(dev);
+ plat->mci = dev_read_addr_ptr(dev);
atmel_mci_setup_cfg(dev);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+//#define DEBUG
+#include <cpu_func.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <env.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <log.h>
+#include <malloc.h>
+#include <memalign.h>
+#include <mmc.h>
+#include <part.h>
+#include <pci.h>
+#include <pci_ids.h>
+#include <time.h>
+#include <watchdog.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/csrs/csrs-mio_emm.h>
+#include <asm/io.h>
+
+#include <power/regulator.h>
+
+#include "octeontx_hsmmc.h"
+
+#define MMC_TIMEOUT_SHORT 20 /* in ms */
+#define MMC_TIMEOUT_LONG 1000
+#define MMC_TIMEOUT_ERASE 10000
+
+#define MMC_DEFAULT_DATA_IN_TAP 10
+#define MMC_DEFAULT_CMD_IN_TAP 10
+#define MMC_DEFAULT_CMD_OUT_TAP 39
+#define MMC_DEFAULT_DATA_OUT_TAP 39
+#define MMC_DEFAULT_HS200_CMD_IN_TAP 24
+#define MMC_DEFAULT_HS200_DATA_IN_TAP 24
+#define MMC_DEFAULT_HS200_CMD_OUT_TAP (otx_is_soc(CN95XX) ? 10 : 5)
+#define MMC_DEFAULT_HS200_DATA_OUT_TAP (otx_is_soc(CN95XX) ? 10 : 5)
+#define MMC_DEFAULT_HS400_CMD_OUT_TAP (otx_is_soc(CN95XX) ? 10 : 5)
+#define MMC_DEFAULT_HS400_DATA_OUT_TAP (otx_is_soc(CN95XX) ? 5 : 3)
+#define MMC_DEFAULT_HS200_CMD_OUT_DLY 800 /* Delay in ps */
+#define MMC_DEFAULT_HS200_DATA_OUT_DLY 800 /* Delay in ps */
+#define MMC_DEFAULT_HS400_CMD_OUT_DLY 800 /* Delay in ps */
+#define MMC_DEFAULT_HS400_DATA_OUT_DLY 400 /* Delay in ps */
+#define MMC_DEFAULT_SD_UHS_SDR104_CMD_OUT_TAP MMC_DEFAULT_HS200_CMD_OUT_TAP
+#define MMC_DEFAULT_SD_UHS_SDR104_DATA_OUT_TAP MMC_DEFAULT_HS200_DATA_OUT_TAP
+#define MMC_LEGACY_DEFAULT_CMD_OUT_TAP 39
+#define MMC_LEGACY_DEFAULT_DATA_OUT_TAP 39
+#define MMC_SD_LEGACY_DEFAULT_CMD_OUT_TAP 63
+#define MMC_SD_LEGACY_DEFAULT_DATA_OUT_TAP 63
+#define MMC_HS_CMD_OUT_TAP 32
+#define MMC_HS_DATA_OUT_TAP 32
+#define MMC_SD_HS_CMD_OUT_TAP 26
+#define MMC_SD_HS_DATA_OUT_TAP 26
+#define MMC_SD_UHS_SDR25_CMD_OUT_TAP 26
+#define MMC_SD_UHS_SDR25_DATA_OUT_TAP 26
+#define MMC_SD_UHS_SDR50_CMD_OUT_TAP 26
+#define MMC_SD_UHS_SDR50_DATA_OUT_TAP 26
+#define MMC_DEFAULT_TAP_DELAY 4
+#define TOTAL_NO_OF_TAPS 512
+static void octeontx_mmc_switch_to(struct mmc *mmc);
+static int octeontx_mmc_configure_delay(struct mmc *mmc);
+static void octeontx_mmc_set_timing(struct mmc *mmc);
+static void set_wdog(struct mmc *mmc, u64 us);
+static void do_switch(struct mmc *mmc, union mio_emm_switch emm_switch);
+static int octeontx_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data);
+static int octeontx2_mmc_calc_delay(struct mmc *mmc, int delay);
+static int octeontx_mmc_calibrate_delay(struct mmc *mmc);
+static int octeontx_mmc_set_input_bus_timing(struct mmc *mmc);
+static int octeontx_mmc_set_output_bus_timing(struct mmc *mmc);
+
+static bool host_probed;
+
+/**
+ * Get the slot data structure from a MMC data structure
+ */
+static inline struct octeontx_mmc_slot *mmc_to_slot(struct mmc *mmc)
+{
+ return container_of(mmc, struct octeontx_mmc_slot, mmc);
+}
+
+static inline struct octeontx_mmc_host *mmc_to_host(struct mmc *mmc)
+{
+ return mmc_to_slot(mmc)->host;
+}
+
+static inline struct octeontx_mmc_slot *dev_to_mmc_slot(struct udevice *dev)
+{
+ return dev_get_priv(dev);
+}
+
+static inline struct mmc *dev_to_mmc(struct udevice *dev)
+{
+ return &((struct octeontx_mmc_slot *)dev_get_priv(dev))->mmc;
+}
+
+#ifdef DEBUG
+const char *mmc_reg_str(u64 reg)
+{
+ if (reg == MIO_EMM_DMA_CFG())
+ return "MIO_EMM_DMA_CFG";
+ if (reg == MIO_EMM_DMA_ADR())
+ return "MIO_EMM_DMA_ADR";
+ if (reg == MIO_EMM_DMA_INT())
+ return "MIO_EMM_DMA_INT";
+ if (reg == MIO_EMM_CFG())
+ return "MIO_EMM_CFG";
+ if (reg == MIO_EMM_MODEX(0))
+ return "MIO_EMM_MODE0";
+ if (reg == MIO_EMM_MODEX(1))
+ return "MIO_EMM_MODE1";
+ if (reg == MIO_EMM_MODEX(2))
+ return "MIO_EMM_MODE2";
+ if (reg == MIO_EMM_MODEX(3))
+ return "MIO_EMM_MODE3";
+ if (reg == MIO_EMM_IO_CTL())
+ return "MIO_EMM_IO_CTL";
+ if (reg == MIO_EMM_SWITCH())
+ return "MIO_EMM_SWITCH";
+ if (reg == MIO_EMM_DMA())
+ return "MIO_EMM_DMA";
+ if (reg == MIO_EMM_CMD())
+ return "MIO_EMM_CMD";
+ if (reg == MIO_EMM_RSP_STS())
+ return "MIO_EMM_RSP_STS";
+ if (reg == MIO_EMM_RSP_LO())
+ return "MIO_EMM_RSP_LO";
+ if (reg == MIO_EMM_RSP_HI())
+ return "MIO_EMM_RSP_HI";
+ if (reg == MIO_EMM_INT())
+ return "MIO_EMM_INT";
+ if (reg == MIO_EMM_WDOG())
+ return "MIO_EMM_WDOG";
+ if (reg == MIO_EMM_DMA_ARG())
+ return "MIO_EMM_DMA_ARG";
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ if (reg == MIO_EMM_SAMPLE())
+ return "MIO_EMM_SAMPLE";
+ }
+ if (reg == MIO_EMM_STS_MASK())
+ return "MIO_EMM_STS_MASK";
+ if (reg == MIO_EMM_RCA())
+ return "MIO_EMM_RCA";
+ if (reg == MIO_EMM_BUF_IDX())
+ return "MIO_EMM_BUF_IDX";
+ if (reg == MIO_EMM_BUF_DAT())
+ return "MIO_EMM_BUF_DAT";
+ if (!IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ if (reg == MIO_EMM_CALB())
+ return "MIO_EMM_CALB";
+ if (reg == MIO_EMM_TAP())
+ return "MIO_EMM_TAP";
+ if (reg == MIO_EMM_TIMING())
+ return "MIO_EMM_TIMING";
+ if (reg == MIO_EMM_DEBUG())
+ return "MIO_EMM_DEBUG";
+ }
+
+ return "UNKNOWN";
+}
+#endif
+
+static void octeontx_print_rsp_sts(struct mmc *mmc)
+{
+#ifdef DEBUG
+ union mio_emm_rsp_sts emm_rsp_sts;
+ const struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ static const char * const ctype_xor_str[] = {
+ "No data",
+ "Read data into Dbuf",
+ "Write data from Dbuf",
+ "Reserved"
+ };
+
+ static const char * const rtype_xor_str[] = {
+ "No response",
+ "R1, 48 bits",
+ "R2, 136 bits",
+ "R3, 48 bits",
+ "R4, 48 bits",
+ "R5, 48 bits",
+ "Reserved 6",
+ "Reserved 7"
+ };
+
+ emm_rsp_sts.u = readq(host->base_addr + MIO_EMM_RSP_STS());
+ printf("\nMIO_EMM_RSP_STS: 0x%016llx\n", emm_rsp_sts.u);
+ printf(" 60-61: bus_id: %u\n", emm_rsp_sts.s.bus_id);
+ printf(" 59: cmd_val: %s\n",
+ emm_rsp_sts.s.cmd_val ? "yes" : "no");
+ printf(" 58: switch_val: %s\n",
+ emm_rsp_sts.s.switch_val ? "yes" : "no");
+ printf(" 57: dma_val: %s\n",
+ emm_rsp_sts.s.dma_val ? "yes" : "no");
+ printf(" 56: dma_pend: %s\n",
+ emm_rsp_sts.s.dma_pend ? "yes" : "no");
+ printf(" 28: dbuf_err: %s\n",
+ emm_rsp_sts.s.dbuf_err ? "yes" : "no");
+ printf(" 23: dbuf: %u\n", emm_rsp_sts.s.dbuf);
+ printf(" 22: blk_timeout: %s\n",
+ emm_rsp_sts.s.blk_timeout ? "yes" : "no");
+ printf(" 21: blk_crc_err: %s\n",
+ emm_rsp_sts.s.blk_crc_err ? "yes" : "no");
+ printf(" 20: rsp_busybit: %s\n",
+ emm_rsp_sts.s.rsp_busybit ? "yes" : "no");
+ printf(" 19: stp_timeout: %s\n",
+ emm_rsp_sts.s.stp_timeout ? "yes" : "no");
+ printf(" 18: stp_crc_err: %s\n",
+ emm_rsp_sts.s.stp_crc_err ? "yes" : "no");
+ printf(" 17: stp_bad_sts: %s\n",
+ emm_rsp_sts.s.stp_bad_sts ? "yes" : "no");
+ printf(" 16: stp_val: %s\n",
+ emm_rsp_sts.s.stp_val ? "yes" : "no");
+ printf(" 15: rsp_timeout: %s\n",
+ emm_rsp_sts.s.rsp_timeout ? "yes" : "no");
+ printf(" 14: rsp_crc_err: %s\n",
+ emm_rsp_sts.s.rsp_crc_err ? "yes" : "no");
+ printf(" 13: rsp_bad_sts: %s\n",
+ emm_rsp_sts.s.rsp_bad_sts ? "yes" : "no");
+ printf(" 12: rsp_val: %s\n",
+ emm_rsp_sts.s.rsp_val ? "yes" : "no");
+ printf(" 9-11: rsp_type: %s\n",
+ rtype_xor_str[emm_rsp_sts.s.rsp_type]);
+ printf(" 7-8: cmd_type: %s\n",
+ ctype_xor_str[emm_rsp_sts.s.cmd_type]);
+ printf(" 1-6: cmd_idx: %u\n",
+ emm_rsp_sts.s.cmd_idx);
+ printf(" 0: cmd_done: %s\n",
+ emm_rsp_sts.s.cmd_done ? "yes" : "no");
+#endif
+}
+
+static inline u64 read_csr(struct mmc *mmc, u64 reg)
+{
+ const struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ u64 value = readq(host->base_addr + reg);
+#ifdef DEBUG_CSR
+ printf(" %s: %s(0x%p) => 0x%llx\n", __func__,
+ mmc_reg_str(reg), host->base_addr + reg,
+ value);
+#endif
+ return value;
+}
+
+/**
+ * Writes to a CSR register
+ *
+ * @param[in] mmc pointer to mmc data structure
+ * @param reg register offset
+ * @param value value to write to register
+ */
+static inline void write_csr(struct mmc *mmc, u64 reg, u64 value)
+{
+ const struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ void *addr = host->base_addr + reg;
+
+#ifdef DEBUG_CSR
+ printf(" %s: %s(0x%p) <= 0x%llx\n", __func__, mmc_reg_str(reg),
+ addr, value);
+#endif
+ writeq(value, addr);
+}
+
+#ifdef DEBUG
+static void mmc_print_status(u32 status)
+{
+#ifdef DEBUG_STATUS
+ static const char * const state[] = {
+ "Idle", /* 0 */
+ "Ready", /* 1 */
+ "Ident", /* 2 */
+ "Standby", /* 3 */
+ "Tran", /* 4 */
+ "Data", /* 5 */
+ "Receive", /* 6 */
+ "Program", /* 7 */
+ "Dis", /* 8 */
+ "Btst", /* 9 */
+ "Sleep", /* 10 */
+ "reserved", /* 11 */
+ "reserved", /* 12 */
+ "reserved", /* 13 */
+ "reserved", /* 14 */
+ "reserved" /* 15 */ };
+ if (status & R1_APP_CMD)
+ puts("MMC ACMD\n");
+ if (status & R1_SWITCH_ERROR)
+ puts("MMC switch error\n");
+ if (status & R1_READY_FOR_DATA)
+ puts("MMC ready for data\n");
+ printf("MMC %s state\n", state[R1_CURRENT_STATE(status)]);
+ if (status & R1_ERASE_RESET)
+ puts("MMC erase reset\n");
+ if (status & R1_WP_ERASE_SKIP)
+ puts("MMC partial erase due to write protected blocks\n");
+ if (status & R1_CID_CSD_OVERWRITE)
+ puts("MMC CID/CSD overwrite error\n");
+ if (status & R1_ERROR)
+ puts("MMC undefined device error\n");
+ if (status & R1_CC_ERROR)
+ puts("MMC device error\n");
+ if (status & R1_CARD_ECC_FAILED)
+ puts("MMC internal ECC failed to correct data\n");
+ if (status & R1_ILLEGAL_COMMAND)
+ puts("MMC illegal command\n");
+ if (status & R1_COM_CRC_ERROR)
+ puts("MMC CRC of previous command failed\n");
+ if (status & R1_LOCK_UNLOCK_FAILED)
+ puts("MMC sequence or password error in lock/unlock device command\n");
+ if (status & R1_CARD_IS_LOCKED)
+ puts("MMC device locked by host\n");
+ if (status & R1_WP_VIOLATION)
+ puts("MMC attempt to program write protected block\n");
+ if (status & R1_ERASE_PARAM)
+ puts("MMC invalid selection of erase groups for erase\n");
+ if (status & R1_ERASE_SEQ_ERROR)
+ puts("MMC error in sequence of erase commands\n");
+ if (status & R1_BLOCK_LEN_ERROR)
+ puts("MMC block length error\n");
+ if (status & R1_ADDRESS_ERROR)
+ puts("MMC address misalign error\n");
+ if (status & R1_OUT_OF_RANGE)
+ puts("MMC address out of range\n");
+#endif
+}
+#endif
+
+/**
+ * Print out all of the register values where mmc is optional
+ *
+ * @param mmc MMC device (can be NULL)
+ * @param host Pointer to host data structure (can be NULL if mmc is !NULL)
+ */
+static void octeontx_mmc_print_registers2(struct mmc *mmc,
+ struct octeontx_mmc_host *host)
+{
+ struct octeontx_mmc_slot *slot = mmc ? mmc->priv : NULL;
+ union mio_emm_dma_cfg emm_dma_cfg;
+ union mio_emm_dma_adr emm_dma_adr;
+ union mio_emm_dma_int emm_dma_int;
+ union mio_emm_cfg emm_cfg;
+ union mio_emm_modex emm_mode;
+ union mio_emm_switch emm_switch;
+ union mio_emm_dma emm_dma;
+ union mio_emm_cmd emm_cmd;
+ union mio_emm_rsp_sts emm_rsp_sts;
+ union mio_emm_rsp_lo emm_rsp_lo;
+ union mio_emm_rsp_hi emm_rsp_hi;
+ union mio_emm_int emm_int;
+ union mio_emm_wdog emm_wdog;
+ union mio_emm_sample emm_sample;
+ union mio_emm_calb emm_calb;
+ union mio_emm_tap emm_tap;
+ union mio_emm_timing emm_timing;
+ union mio_emm_io_ctl io_ctl;
+ union mio_emm_debug emm_debug;
+ union mio_emm_sts_mask emm_sts_mask;
+ union mio_emm_rca emm_rca;
+ int bus;
+
+ static const char * const bus_width_str[] = {
+ "1-bit data bus (power on)",
+ "4-bit data bus",
+ "8-bit data bus",
+ "reserved (3)",
+ "reserved (4)",
+ "4-bit data bus (dual data rate)",
+ "8-bit data bus (dual data rate)",
+ "reserved (7)",
+ "reserved (8)",
+ "invalid (9)",
+ "invalid (10)",
+ "invalid (11)",
+ "invalid (12)",
+ "invalid (13)",
+ "invalid (14)",
+ "invalid (15)",
+ };
+ static const char * const ctype_xor_str[] = {
+ "No data",
+ "Read data into Dbuf",
+ "Write data from Dbuf",
+ "Reserved"
+ };
+
+ static const char * const rtype_xor_str[] = {
+ "No response",
+ "R1, 48 bits",
+ "R2, 136 bits",
+ "R3, 48 bits",
+ "R4, 48 bits",
+ "R5, 48 bits",
+ "Reserved 6",
+ "Reserved 7"
+ };
+
+ if (!host && mmc)
+ host = mmc_to_host(mmc);
+
+ if (mmc)
+ printf("%s: bus id: %u\n", __func__, slot->bus_id);
+ emm_dma_cfg.u = readq(host->base_addr + MIO_EMM_DMA_CFG());
+ printf("MIO_EMM_DMA_CFG: 0x%016llx\n",
+ emm_dma_cfg.u);
+ printf(" 63: en: %s\n",
+ emm_dma_cfg.s.en ? "enabled" : "disabled");
+ printf(" 62: rw: %s\n",
+ emm_dma_cfg.s.rw ? "write" : "read");
+ printf(" 61: clr: %s\n",
+ emm_dma_cfg.s.clr ? "clear" : "not clear");
+ printf(" 59: swap32: %s\n",
+ emm_dma_cfg.s.swap32 ? "yes" : "no");
+ printf(" 58: swap16: %s\n",
+ emm_dma_cfg.s.swap16 ? "yes" : "no");
+ printf(" 57: swap8: %s\n",
+ emm_dma_cfg.s.swap8 ? "yes" : "no");
+ printf(" 56: endian: %s\n",
+ emm_dma_cfg.s.endian ? "little" : "big");
+ printf(" 36-55: size: %u\n",
+ emm_dma_cfg.s.size);
+
+ emm_dma_adr.u = readq(host->base_addr + MIO_EMM_DMA_ADR());
+ printf("MIO_EMM_DMA_ADR: 0x%016llx\n", emm_dma_adr.u);
+ printf(" 0-49: adr: 0x%llx\n",
+ (u64)emm_dma_adr.s.adr);
+
+ emm_dma_int.u = readq(host->base_addr + MIO_EMM_DMA_INT());
+ printf("\nMIO_EMM_DMA_INT: 0x%016llx\n",
+ emm_dma_int.u);
+ printf(" 1: FIFO: %s\n",
+ emm_dma_int.s.fifo ? "yes" : "no");
+ printf(" 0: Done: %s\n",
+ emm_dma_int.s.done ? "yes" : "no");
+ emm_cfg.u = readq(host->base_addr + MIO_EMM_CFG());
+
+ printf("\nMIO_EMM_CFG: 0x%016llx\n",
+ emm_cfg.u);
+ printf(" 3: bus_ena3: %s\n",
+ emm_cfg.s.bus_ena & 0x08 ? "yes" : "no");
+ printf(" 2: bus_ena2: %s\n",
+ emm_cfg.s.bus_ena & 0x04 ? "yes" : "no");
+ printf(" 1: bus_ena1: %s\n",
+ emm_cfg.s.bus_ena & 0x02 ? "yes" : "no");
+ printf(" 0: bus_ena0: %s\n",
+ emm_cfg.s.bus_ena & 0x01 ? "yes" : "no");
+ for (bus = 0; bus < 4; bus++) {
+ emm_mode.u = readq(host->base_addr + MIO_EMM_MODEX(bus));
+ printf("\nMIO_EMM_MODE%u: 0x%016llx\n",
+ bus, emm_mode.u);
+ if (!IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ printf(" 50: hs400_timing: %s\n",
+ emm_mode.s.hs400_timing ? "yes" : "no");
+ printf(" 49: hs200_timing: %s\n",
+ emm_mode.s.hs200_timing ? "yes" : "no");
+ }
+ printf(" 48: hs_timing: %s\n",
+ emm_mode.s.hs_timing ? "yes" : "no");
+ printf(" 40-42: bus_width: %s\n",
+ bus_width_str[emm_mode.s.bus_width]);
+ printf(" 32-35: power_class %u\n",
+ emm_mode.s.power_class);
+ printf(" 16-31: clk_hi: %u\n",
+ emm_mode.s.clk_hi);
+ printf(" 0-15: clk_lo: %u\n",
+ emm_mode.s.clk_lo);
+ }
+
+ emm_switch.u = readq(host->base_addr + MIO_EMM_SWITCH());
+ printf("\nMIO_EMM_SWITCH: 0x%016llx\n", emm_switch.u);
+ printf(" 60-61: bus_id: %u\n", emm_switch.s.bus_id);
+ printf(" 59: switch_exe: %s\n",
+ emm_switch.s.switch_exe ? "yes" : "no");
+ printf(" 58: switch_err0: %s\n",
+ emm_switch.s.switch_err0 ? "yes" : "no");
+ printf(" 57: switch_err1: %s\n",
+ emm_switch.s.switch_err1 ? "yes" : "no");
+ printf(" 56: switch_err2: %s\n",
+ emm_switch.s.switch_err2 ? "yes" : "no");
+ printf(" 48: hs_timing: %s\n",
+ emm_switch.s.hs_timing ? "yes" : "no");
+ printf(" 42-40: bus_width: %s\n",
+ bus_width_str[emm_switch.s.bus_width]);
+ printf(" 32-35: power_class: %u\n",
+ emm_switch.s.power_class);
+ printf(" 16-31: clk_hi: %u\n",
+ emm_switch.s.clk_hi);
+ printf(" 0-15: clk_lo: %u\n", emm_switch.s.clk_lo);
+
+ emm_dma.u = readq(host->base_addr + MIO_EMM_DMA());
+ printf("\nMIO_EMM_DMA: 0x%016llx\n", emm_dma.u);
+ printf(" 60-61: bus_id: %u\n", emm_dma.s.bus_id);
+ printf(" 59: dma_val: %s\n",
+ emm_dma.s.dma_val ? "yes" : "no");
+ printf(" 58: sector: %s mode\n",
+ emm_dma.s.sector ? "sector" : "byte");
+ printf(" 57: dat_null: %s\n",
+ emm_dma.s.dat_null ? "yes" : "no");
+ printf(" 51-56: thres: %u\n", emm_dma.s.thres);
+ printf(" 50: rel_wr: %s\n",
+ emm_dma.s.rel_wr ? "yes" : "no");
+ printf(" 49: rw: %s\n",
+ emm_dma.s.rw ? "write" : "read");
+ printf(" 48: multi: %s\n",
+ emm_dma.s.multi ? "yes" : "no");
+ printf(" 32-47: block_cnt: %u\n",
+ emm_dma.s.block_cnt);
+ printf(" 0-31: card_addr: 0x%x\n",
+ emm_dma.s.card_addr);
+
+ emm_cmd.u = readq(host->base_addr + MIO_EMM_CMD());
+ printf("\nMIO_EMM_CMD: 0x%016llx\n", emm_cmd.u);
+ printf("\n 62: skip_busy: %s\n",
+ emm_cmd.s.skip_busy ? "yes" : "no");
+ printf(" 60-61: bus_id: %u\n", emm_cmd.s.bus_id);
+ printf(" 59: cmd_val: %s\n",
+ emm_cmd.s.cmd_val ? "yes" : "no");
+ printf(" 55: dbuf: %u\n", emm_cmd.s.dbuf);
+ printf(" 49-54: offset: %u\n", emm_cmd.s.offset);
+ printf(" 41-42: ctype_xor: %s\n",
+ ctype_xor_str[emm_cmd.s.ctype_xor]);
+ printf(" 38-40: rtype_xor: %s\n",
+ rtype_xor_str[emm_cmd.s.rtype_xor]);
+ printf(" 32-37: cmd_idx: %u\n", emm_cmd.s.cmd_idx);
+ printf(" 0-31: arg: 0x%x\n", emm_cmd.s.arg);
+
+ emm_rsp_sts.u = readq(host->base_addr + MIO_EMM_RSP_STS());
+ printf("\nMIO_EMM_RSP_STS: 0x%016llx\n", emm_rsp_sts.u);
+ printf(" 60-61: bus_id: %u\n", emm_rsp_sts.s.bus_id);
+ printf(" 59: cmd_val: %s\n",
+ emm_rsp_sts.s.cmd_val ? "yes" : "no");
+ printf(" 58: switch_val: %s\n",
+ emm_rsp_sts.s.switch_val ? "yes" : "no");
+ printf(" 57: dma_val: %s\n",
+ emm_rsp_sts.s.dma_val ? "yes" : "no");
+ printf(" 56: dma_pend: %s\n",
+ emm_rsp_sts.s.dma_pend ? "yes" : "no");
+ printf(" 28: dbuf_err: %s\n",
+ emm_rsp_sts.s.dbuf_err ? "yes" : "no");
+ printf(" 23: dbuf: %u\n", emm_rsp_sts.s.dbuf);
+ printf(" 22: blk_timeout: %s\n",
+ emm_rsp_sts.s.blk_timeout ? "yes" : "no");
+ printf(" 21: blk_crc_err: %s\n",
+ emm_rsp_sts.s.blk_crc_err ? "yes" : "no");
+ printf(" 20: rsp_busybit: %s\n",
+ emm_rsp_sts.s.rsp_busybit ? "yes" : "no");
+ printf(" 19: stp_timeout: %s\n",
+ emm_rsp_sts.s.stp_timeout ? "yes" : "no");
+ printf(" 18: stp_crc_err: %s\n",
+ emm_rsp_sts.s.stp_crc_err ? "yes" : "no");
+ printf(" 17: stp_bad_sts: %s\n",
+ emm_rsp_sts.s.stp_bad_sts ? "yes" : "no");
+ printf(" 16: stp_val: %s\n",
+ emm_rsp_sts.s.stp_val ? "yes" : "no");
+ printf(" 15: rsp_timeout: %s\n",
+ emm_rsp_sts.s.rsp_timeout ? "yes" : "no");
+ printf(" 14: rsp_crc_err: %s\n",
+ emm_rsp_sts.s.rsp_crc_err ? "yes" : "no");
+ printf(" 13: rsp_bad_sts: %s\n",
+ emm_rsp_sts.s.rsp_bad_sts ? "yes" : "no");
+ printf(" 12: rsp_val: %s\n",
+ emm_rsp_sts.s.rsp_val ? "yes" : "no");
+ printf(" 9-11: rsp_type: %s\n",
+ rtype_xor_str[emm_rsp_sts.s.rsp_type]);
+ printf(" 7-8: cmd_type: %s\n",
+ ctype_xor_str[emm_rsp_sts.s.cmd_type]);
+ printf(" 1-6: cmd_idx: %u\n",
+ emm_rsp_sts.s.cmd_idx);
+ printf(" 0: cmd_done: %s\n",
+ emm_rsp_sts.s.cmd_done ? "yes" : "no");
+
+ emm_rsp_lo.u = readq(host->base_addr + MIO_EMM_RSP_LO());
+ printf("\nMIO_EMM_RSP_STS_LO: 0x%016llx\n", emm_rsp_lo.u);
+
+ emm_rsp_hi.u = readq(host->base_addr + MIO_EMM_RSP_HI());
+ printf("\nMIO_EMM_RSP_STS_HI: 0x%016llx\n", emm_rsp_hi.u);
+
+ emm_int.u = readq(host->base_addr + MIO_EMM_INT());
+ printf("\nMIO_EMM_INT: 0x%016llx\n", emm_int.u);
+ printf(" 6: switch_err: %s\n",
+ emm_int.s.switch_err ? "yes" : "no");
+ printf(" 5: switch_done: %s\n",
+ emm_int.s.switch_done ? "yes" : "no");
+ printf(" 4: dma_err: %s\n",
+ emm_int.s.dma_err ? "yes" : "no");
+ printf(" 3: cmd_err: %s\n",
+ emm_int.s.cmd_err ? "yes" : "no");
+ printf(" 2: dma_done: %s\n",
+ emm_int.s.dma_done ? "yes" : "no");
+ printf(" 1: cmd_done: %s\n",
+ emm_int.s.cmd_done ? "yes" : "no");
+ printf(" 0: buf_done: %s\n",
+ emm_int.s.buf_done ? "yes" : "no");
+
+ emm_wdog.u = readq(host->base_addr + MIO_EMM_WDOG());
+ printf("\nMIO_EMM_WDOG: 0x%016llx (%u)\n",
+ emm_wdog.u, emm_wdog.s.clk_cnt);
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ emm_sample.u = readq(host->base_addr + MIO_EMM_SAMPLE());
+ printf("\nMIO_EMM_SAMPLE: 0x%016llx\n",
+ emm_sample.u);
+ printf(" 16-25: cmd_cnt: %u\n",
+ emm_sample.s.cmd_cnt);
+ printf(" 0-9: dat_cnt: %u\n",
+ emm_sample.s.dat_cnt);
+ }
+
+ emm_sts_mask.u = readq(host->base_addr + MIO_EMM_STS_MASK());
+ printf("\nMIO_EMM_STS_MASK: 0x%016llx\n", emm_sts_mask.u);
+
+ emm_rca.u = readq(host->base_addr + MIO_EMM_RCA());
+ printf("\nMIO_EMM_RCA: 0x%016llx\n", emm_rca.u);
+ printf(" 0-15: card_rca: 0x%04x\n",
+ emm_rca.s.card_rca);
+ if (!IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ emm_calb.u = readq(host->base_addr + MIO_EMM_CALB());
+ printf("\nMIO_EMM_CALB: 0x%016llx\n",
+ emm_calb.u);
+ printf(" 0: start: %u\n",
+ emm_calb.s.start);
+ emm_tap.u = readq(host->base_addr + MIO_EMM_TAP());
+ printf("\nMIO_EMM_TAP: 0x%016llx\n",
+ emm_tap.u);
+ printf(" 7-0: delay: %u\n", emm_tap.s.delay);
+ emm_timing.u = readq(host->base_addr + MIO_EMM_TIMING());
+ printf("\nMIO_EMM_TIMING: 0x%016llx\n",
+ emm_timing.u);
+ printf(" 53-48: cmd_in_tap: %u\n",
+ emm_timing.s.cmd_in_tap);
+ printf(" 37-32: cmd_out_tap: %u\n",
+ emm_timing.s.cmd_out_tap);
+ printf(" 21-16: data_in_tap: %u\n",
+ emm_timing.s.data_in_tap);
+ printf(" 5-0: data_out_tap: %u\n",
+ emm_timing.s.data_out_tap);
+ io_ctl.u = readq(host->base_addr + MIO_EMM_IO_CTL());
+ printf("\nMIO_IO_CTL: 0x%016llx\n", io_ctl.u);
+ printf(" 3-2: drive: %u (%u mA)\n",
+ io_ctl.s.drive, 2 << io_ctl.s.drive);
+ printf(" 0: slew: %u %s\n", io_ctl.s.slew,
+ io_ctl.s.slew ? "high" : "low");
+ emm_debug.u = readq(host->base_addr + MIO_EMM_DEBUG());
+ printf("\nMIO_EMM_DEBUG: 0x%016llx\n",
+ emm_debug.u);
+ printf(" 21: rdsync_rst 0x%x\n",
+ emm_debug.s.rdsync_rst);
+ printf(" 20: emmc_clk_disable 0x%x\n",
+ emm_debug.s.emmc_clk_disable);
+ printf(" 19-16: dma_sm: 0x%x\n",
+ emm_debug.s.dma_sm);
+ printf(" 15-12: data_sm: 0x%x\n",
+ emm_debug.s.data_sm);
+ printf(" 11-8: cmd_sm: 0x%x\n",
+ emm_debug.s.cmd_sm);
+ printf(" 0: clk_on: 0x%x\n",
+ emm_debug.s.clk_on);
+ }
+
+ puts("\n");
+}
+
+/**
+ * Print out all of the register values
+ *
+ * @param mmc MMC device
+ */
+static void octeontx_mmc_print_registers(struct mmc *mmc)
+{
+#ifdef DEBUG_REGISTERS
+ const int print = 1;
+#else
+ const int print = 0;
+#endif
+ if (print)
+ octeontx_mmc_print_registers2(mmc, mmc_to_host(mmc));
+}
+
+static const struct octeontx_sd_mods octeontx_cr_types[] = {
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD0 */
+{ {0, 3}, {0, 3}, {0, 0} }, /* CMD1 */
+{ {0, 2}, {0, 2}, {0, 0} }, /* CMD2 */
+{ {0, 1}, {0, 3}, {0, 0} }, /* CMD3 SD_CMD_SEND_RELATIVE_ADDR 0, 2 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD4 */
+{ {0, 1}, {0, 1}, {0, 0} }, /* CMD5 */
+{ {0, 1}, {1, 1}, {0, 1} }, /*
+ * CMD6 SD_CMD_SWITCH_FUNC 1,0
+ * (ACMD) SD_APP_SET_BUS_WIDTH
+ */
+{ {0, 1}, {0, 1}, {0, 0} }, /* CMD7 */
+{ {1, 1}, {0, 3}, {0, 0} }, /* CMD8 SD_CMD_SEND_IF_COND 1,2 */
+{ {0, 2}, {0, 2}, {0, 0} }, /* CMD9 */
+{ {0, 2}, {0, 2}, {0, 0} }, /* CMD10 */
+{ {1, 1}, {0, 1}, {1, 1} }, /* CMD11 SD_CMD_SWITCH_UHS18V 1,0 */
+{ {0, 1}, {0, 1}, {0, 0} }, /* CMD12 */
+{ {0, 1}, {0, 1}, {1, 3} }, /* CMD13 (ACMD)) SD_CMD_APP_SD_STATUS 1,2 */
+{ {1, 1}, {1, 1}, {0, 0} }, /* CMD14 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD15 */
+{ {0, 1}, {0, 1}, {0, 0} }, /* CMD16 */
+{ {1, 1}, {1, 1}, {0, 0} }, /* CMD17 */
+{ {1, 1}, {1, 1}, {0, 0} }, /* CMD18 */
+{ {3, 1}, {3, 1}, {0, 0} }, /* CMD19 */
+{ {2, 1}, {0, 0}, {0, 0} }, /* CMD20 */ /* SD 2,0 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD21 */
+{ {0, 0}, {0, 0}, {1, 1} }, /* CMD22 (ACMD) SD_APP_SEND_NUM_WR_BLKS 1,0 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD23 */ /* SD ACMD 1,0 */
+{ {2, 1}, {2, 1}, {2, 1} }, /* CMD24 */
+{ {2, 1}, {2, 1}, {2, 1} }, /* CMD25 */
+{ {2, 1}, {2, 1}, {2, 1} }, /* CMD26 */
+{ {2, 1}, {2, 1}, {2, 1} }, /* CMD27 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD28 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD29 */
+{ {1, 1}, {1, 1}, {1, 1} }, /* CMD30 */
+{ {1, 1}, {1, 1}, {1, 1} }, /* CMD31 */
+{ {0, 0}, {0, 1}, {0, 0} }, /* CMD32 SD_CMD_ERASE_WR_BLK_START 0,1 */
+{ {0, 0}, {0, 1}, {0, 0} }, /* CMD33 SD_CMD_ERASE_WR_BLK_END 0,1 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD34 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD35 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD36 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD37 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD38 */
+{ {0, 4}, {0, 4}, {0, 4} }, /* CMD39 */
+{ {0, 5}, {0, 5}, {0, 5} }, /* CMD40 */
+{ {0, 0}, {0, 0}, {0, 3} }, /* CMD41 (ACMD) SD_CMD_APP_SEND_OP_COND 0,3 */
+{ {2, 1}, {2, 1}, {2, 1} }, /* CMD42 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD43 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD44 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD45 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD46 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD47 */
+{ {0, 0}, {1, 0}, {0, 0} }, /* CMD48 SD_CMD_READ_EXTR_SINGLE */
+{ {0, 0}, {2, 0}, {0, 0} }, /* CMD49 SD_CMD_WRITE_EXTR_SINGLE */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD50 */
+{ {0, 0}, {0, 0}, {1, 1} }, /* CMD51 (ACMD) SD_CMD_APP_SEND_SCR 1,1 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD52 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD53 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD54 */
+{ {0, 1}, {0, 1}, {0, 1} }, /* CMD55 */
+{ {0xff, 0xff}, {0xff, 0xff}, {0xff, 0xff} }, /* CMD56 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD57 */
+{ {0, 0}, {0, 3}, {0, 3} }, /* CMD58 SD_CMD_SPI_READ_OCR 0,3 */
+{ {0, 0}, {0, 1}, {0, 0} }, /* CMD59 SD_CMD_SPI_CRC_ON_OFF 0,1 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD60 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD61 */
+{ {0, 0}, {0, 0}, {0, 0} }, /* CMD62 */
+{ {0, 0}, {0, 0}, {0, 0} } /* CMD63 */
+};
+
+/**
+ * Returns XOR values needed for SD commands and other quirks
+ *
+ * @param mmc mmc device
+ * @param cmd command information
+ *
+ * @return octeontx_mmc_cr_mods data structure with various quirks and flags
+ */
+static struct octeontx_mmc_cr_mods
+octeontx_mmc_get_cr_mods(struct mmc *mmc, const struct mmc_cmd *cmd,
+ const struct mmc_data *data)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct octeontx_mmc_cr_mods cr = {0, 0};
+ const struct octeontx_sd_mods *sdm =
+ &octeontx_cr_types[cmd->cmdidx & 0x3f];
+ u8 c = sdm->mmc.c, r = sdm->mmc.r;
+ u8 desired_ctype = 0;
+
+ if (IS_MMC(mmc)) {
+#ifdef MMC_SUPPORTS_TUNING
+ if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) {
+ if (cmd->resp_type == MMC_RSP_R1)
+ cr.rtype_xor = 1;
+ if (data && data->flags & MMC_DATA_READ)
+ cr.ctype_xor = 1;
+ }
+#endif
+ return cr;
+ }
+
+ if (cmd->cmdidx == 56)
+ c = (cmd->cmdarg & 1) ? 1 : 2;
+
+ if (data) {
+ if (data->flags & MMC_DATA_READ)
+ desired_ctype = 1;
+ else if (data->flags & MMC_DATA_WRITE)
+ desired_ctype = 2;
+ }
+
+ cr.ctype_xor = c ^ desired_ctype;
+ if (slot->is_acmd)
+ cr.rtype_xor = r ^ sdm->sdacmd.r;
+ else
+ cr.rtype_xor = r ^ sdm->sd.r;
+
+ debug("%s(%s): mmc c: %d, mmc r: %d, desired c: %d, xor c: %d, xor r: %d\n",
+ __func__, mmc->dev->name, c, r, desired_ctype,
+ cr.ctype_xor, cr.rtype_xor);
+ return cr;
+}
+
+/**
+ * Keep track of switch commands internally
+ */
+static void octeontx_mmc_track_switch(struct mmc *mmc, u32 cmd_arg)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ u8 how = (cmd_arg >> 24) & 3;
+ u8 where = (u8)(cmd_arg >> 16);
+ u8 val = (u8)(cmd_arg >> 8);
+
+ slot->want_switch = slot->cached_switch;
+
+ if (slot->is_acmd)
+ return;
+
+ if (how != 3)
+ return;
+
+ switch (where) {
+ case EXT_CSD_BUS_WIDTH:
+ slot->want_switch.s.bus_width = val;
+ break;
+ case EXT_CSD_POWER_CLASS:
+ slot->want_switch.s.power_class = val;
+ break;
+ case EXT_CSD_HS_TIMING:
+ slot->want_switch.s.hs_timing = 0;
+ slot->want_switch.s.hs200_timing = 0;
+ slot->want_switch.s.hs400_timing = 0;
+ switch (val & 0xf) {
+ case 0:
+ break;
+ case 1:
+ slot->want_switch.s.hs_timing = 1;
+ break;
+ case 2:
+ if (!slot->is_asim && !slot->is_emul)
+ slot->want_switch.s.hs200_timing = 1;
+ break;
+ case 3:
+ if (!slot->is_asim && !slot->is_emul)
+ slot->want_switch.s.hs400_timing = 1;
+ break;
+ default:
+ pr_err("%s(%s): Unsupported timing mode 0x%x\n",
+ __func__, mmc->dev->name, val & 0xf);
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static int octeontx_mmc_print_rsp_errors(struct mmc *mmc,
+ union mio_emm_rsp_sts rsp_sts)
+{
+ bool err = false;
+ const char *name = mmc->dev->name;
+
+ if (rsp_sts.s.acc_timeout) {
+ pr_warn("%s(%s): acc_timeout\n", __func__, name);
+ err = true;
+ }
+ if (rsp_sts.s.dbuf_err) {
+ pr_warn("%s(%s): dbuf_err\n", __func__, name);
+ err = true;
+ }
+ if (rsp_sts.s.blk_timeout) {
+ pr_warn("%s(%s): blk_timeout\n", __func__, name);
+ err = true;
+ }
+ if (rsp_sts.s.blk_crc_err) {
+ pr_warn("%s(%s): blk_crc_err\n", __func__, name);
+ err = true;
+ }
+ if (rsp_sts.s.stp_timeout) {
+ pr_warn("%s(%s): stp_timeout\n", __func__, name);
+ err = true;
+ }
+ if (rsp_sts.s.stp_crc_err) {
+ pr_warn("%s(%s): stp_crc_err\n", __func__, name);
+ err = true;
+ }
+ if (rsp_sts.s.stp_bad_sts) {
+ pr_warn("%s(%s): stp_bad_sts\n", __func__, name);
+ err = true;
+ }
+ if (err)
+ pr_warn(" rsp_sts: 0x%llx\n", rsp_sts.u);
+
+ return err ? -1 : 0;
+}
+
+/**
+ * Starts a DMA operation for block read/write
+ *
+ * @param mmc mmc device
+ * @param write true if write operation
+ * @param clear true to clear DMA operation
+ * @param adr source or destination DMA address
+ * @param size size in blocks
+ * @param timeout timeout in ms
+ */
+static void octeontx_mmc_start_dma(struct mmc *mmc, bool write,
+ bool clear, u32 block, dma_addr_t adr,
+ u32 size, int timeout)
+{
+ const struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ union mio_emm_dma_cfg emm_dma_cfg;
+ union mio_emm_dma_adr emm_dma_adr;
+ union mio_emm_dma emm_dma;
+
+ /* Clear any interrupts */
+ write_csr(mmc, MIO_EMM_DMA_INT(),
+ read_csr(mmc, MIO_EMM_DMA_INT()));
+
+ emm_dma_cfg.u = 0;
+ emm_dma_cfg.s.en = 1;
+ emm_dma_cfg.s.rw = !!write;
+ emm_dma_cfg.s.clr = !!clear;
+ emm_dma_cfg.s.size = ((u64)(size * mmc->read_bl_len) / 8) - 1;
+#if __BYTE_ORDER != __BIG_ENDIAN
+ emm_dma_cfg.s.endian = 1;
+#endif
+ emm_dma_adr.u = 0;
+ emm_dma_adr.s.adr = adr;
+ write_csr(mmc, MIO_EMM_DMA_ADR(), emm_dma_adr.u);
+ write_csr(mmc, MIO_EMM_DMA_CFG(), emm_dma_cfg.u);
+
+ emm_dma.u = 0;
+ emm_dma.s.bus_id = slot->bus_id;
+ emm_dma.s.dma_val = 1;
+ emm_dma.s.rw = !!write;
+ emm_dma.s.sector = mmc->high_capacity ? 1 : 0;
+
+ if (size > 1 && ((IS_SD(mmc) && (mmc->scr[0] & 2)) || !IS_SD(mmc)))
+ emm_dma.s.multi = 1;
+ else
+ emm_dma.s.multi = 0;
+
+ emm_dma.s.block_cnt = size;
+ if (!mmc->high_capacity)
+ block *= mmc->read_bl_len;
+ emm_dma.s.card_addr = block;
+ debug("%s(%s): card address: 0x%x, size: %d, multi: %d\n",
+ __func__, mmc->dev->name, block, size, emm_dma.s.multi);
+
+ if (timeout > 0)
+ timeout = (timeout * 1000) - 1000;
+ set_wdog(mmc, timeout);
+
+ debug(" Writing 0x%llx to mio_emm_dma\n", emm_dma.u);
+ write_csr(mmc, MIO_EMM_DMA(), emm_dma.u);
+}
+
+/**
+ * Waits for a DMA operation to complete
+ *
+ * @param mmc mmc device
+ * @param timeout timeout in ms
+ *
+ * @return 0 for success (could be DMA errors), -ETIMEDOUT on timeout
+ */
+
+/**
+ * Cleanup DMA engine after a failure
+ *
+ * @param mmc mmc device
+ * @param rsp_sts rsp status
+ */
+static void octeontx_mmc_cleanup_dma(struct mmc *mmc,
+ union mio_emm_rsp_sts rsp_sts)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ union mio_emm_dma emm_dma;
+ ulong start;
+ int retries = 3;
+
+ do {
+ debug("%s(%s): rsp_sts: 0x%llx, rsp_lo: 0x%llx, dma_int: 0x%llx\n",
+ __func__, mmc->dev->name, rsp_sts.u,
+ read_csr(mmc, MIO_EMM_RSP_LO()),
+ read_csr(mmc, MIO_EMM_DMA_INT()));
+ emm_dma.u = read_csr(mmc, MIO_EMM_DMA());
+ emm_dma.s.dma_val = 1;
+ emm_dma.s.dat_null = 1;
+ emm_dma.s.bus_id = slot->bus_id;
+ write_csr(mmc, MIO_EMM_DMA(), emm_dma.u);
+ start = get_timer(0);
+ do {
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ WATCHDOG_RESET();
+ } while (get_timer(start) < 100 &&
+ (rsp_sts.s.dma_val || rsp_sts.s.dma_pend));
+ } while (retries-- >= 0 && rsp_sts.s.dma_pend);
+ if (rsp_sts.s.dma_val)
+ pr_err("%s(%s): Error: could not clean up DMA. RSP_STS: 0x%llx, RSP_LO: 0x%llx\n",
+ __func__, mmc->dev->name, rsp_sts.u,
+ read_csr(mmc, MIO_EMM_RSP_LO()));
+ debug(" rsp_sts after clearing up DMA: 0x%llx\n",
+ read_csr(mmc, MIO_EMM_RSP_STS()));
+}
+
+/**
+ * Waits for a DMA operation to complete
+ *
+ * @param mmc mmc device
+ * @param timeout timeout in ms
+ * @param verbose true to print out error information
+ *
+ * @return 0 for success (could be DMA errors), -ETIMEDOUT on timeout
+ * or -EIO if IO error.
+ */
+static int octeontx_mmc_wait_dma(struct mmc *mmc, bool write, ulong timeout,
+ bool verbose)
+{
+ struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ ulong start_time = get_timer(0);
+ union mio_emm_dma_int emm_dma_int;
+ union mio_emm_rsp_sts rsp_sts;
+ union mio_emm_dma emm_dma;
+ bool timed_out = false;
+ bool err = false;
+
+ debug("%s(%s, %lu, %d), delay: %uus\n", __func__, mmc->dev->name,
+ timeout, verbose, host->dma_wait_delay);
+
+ udelay(host->dma_wait_delay);
+ do {
+ emm_dma_int.u = read_csr(mmc, MIO_EMM_DMA_INT());
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ if (write) {
+ if ((rsp_sts.s.dma_pend && !rsp_sts.s.dma_val) ||
+ rsp_sts.s.blk_timeout ||
+ rsp_sts.s.stp_timeout ||
+ rsp_sts.s.rsp_timeout) {
+ err = true;
+#ifdef DEBUG
+ debug("%s: f1\n", __func__);
+ octeontx_mmc_print_rsp_errors(mmc, rsp_sts);
+#endif
+ break;
+ }
+ } else {
+ if (rsp_sts.s.blk_crc_err ||
+ (rsp_sts.s.dma_pend && !rsp_sts.s.dma_val)) {
+ err = true;
+#if defined(DEBUG)
+ octeontx_mmc_print_rsp_errors(mmc, rsp_sts);
+#endif
+ break;
+ }
+ }
+ if (rsp_sts.s.dma_pend) {
+ /*
+ * If this is set then an error has occurred.
+ * Try and restart the DMA operation.
+ */
+ emm_dma.u = read_csr(mmc, MIO_EMM_DMA());
+ if (verbose) {
+ pr_err("%s(%s): DMA pending error: rsp_sts: 0x%llx, dma_int: 0x%llx, emm_dma: 0x%llx\n",
+ __func__, mmc->dev->name, rsp_sts.u,
+ emm_dma_int.u, emm_dma.u);
+ octeontx_print_rsp_sts(mmc);
+ debug(" MIO_EMM_DEBUG: 0x%llx\n",
+ read_csr(mmc, MIO_EMM_DEBUG()));
+ pr_err("%s: Trying DMA resume...\n", __func__);
+ }
+ emm_dma.s.dma_val = 1;
+ emm_dma.s.dat_null = 1;
+ write_csr(mmc, MIO_EMM_DMA(), emm_dma.u);
+ udelay(10);
+ } else if (!rsp_sts.s.dma_val && emm_dma_int.s.done) {
+ break;
+ }
+ WATCHDOG_RESET();
+ timed_out = (get_timer(start_time) > timeout);
+ } while (!timed_out);
+
+ if (timed_out || err) {
+ if (verbose) {
+ pr_err("%s(%s): MMC DMA %s after %lu ms, rsp_sts: 0x%llx, dma_int: 0x%llx, rsp_sts_lo: 0x%llx, emm_dma: 0x%llx\n",
+ __func__, mmc->dev->name,
+ timed_out ? "timed out" : "error",
+ get_timer(start_time), rsp_sts.u,
+ emm_dma_int.u,
+ read_csr(mmc, MIO_EMM_RSP_LO()),
+ read_csr(mmc, MIO_EMM_DMA()));
+ octeontx_print_rsp_sts(mmc);
+ }
+ if (rsp_sts.s.dma_pend)
+ octeontx_mmc_cleanup_dma(mmc, rsp_sts);
+ } else {
+ write_csr(mmc, MIO_EMM_DMA_INT(),
+ read_csr(mmc, MIO_EMM_DMA_INT()));
+ }
+
+ return timed_out ? -ETIMEDOUT : (err ? -EIO : 0);
+}
+
+/**
+ * Read blocks from the MMC/SD device
+ *
+ * @param mmc mmc device
+ * @param cmd command
+ * @param data data for read
+ * @param verbose true to print out error information
+ *
+ * @return number of blocks read or 0 if error
+ */
+static int octeontx_mmc_read_blocks(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data, bool verbose)
+{
+ struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ union mio_emm_rsp_sts rsp_sts;
+ dma_addr_t dma_addr = (dma_addr_t)dm_pci_virt_to_mem(host->dev,
+ data->dest);
+ ulong count;
+ ulong blkcnt = data->blocks;
+ ulong start = cmd->cmdarg;
+ int timeout = 1000 + blkcnt * 20;
+ bool timed_out = false;
+ bool multi_xfer = cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK;
+
+ debug("%s(%s): dest: %p, dma address: 0x%llx, blkcnt: %lu, start: %lu\n",
+ __func__, mmc->dev->name, data->dest, dma_addr, blkcnt, start);
+ debug("%s: rsp_sts: 0x%llx\n", __func__,
+ read_csr(mmc, MIO_EMM_RSP_STS()));
+ /* use max timeout for multi-block transfers */
+ /* timeout = 0; */
+
+ /*
+ * If we have a valid SD card in the slot, we set the response bit
+ * mask to check for CRC errors and timeouts only.
+ * Otherwise, use the default power on reset value.
+ */
+ write_csr(mmc, MIO_EMM_STS_MASK(),
+ IS_SD(mmc) ? 0x00b00000ull : 0xe4390080ull);
+ invalidate_dcache_range((u64)data->dest,
+ (u64)data->dest + blkcnt * data->blocksize);
+
+ if (multi_xfer) {
+ octeontx_mmc_start_dma(mmc, false, false, start, dma_addr,
+ blkcnt, timeout);
+ timed_out = !!octeontx_mmc_wait_dma(mmc, false, timeout,
+ verbose);
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ if (timed_out || rsp_sts.s.dma_val || rsp_sts.s.dma_pend) {
+ if (!verbose)
+ return 0;
+
+ pr_err("%s(%s): Error: DMA timed out. rsp_sts: 0x%llx, emm_int: 0x%llx, dma_int: 0x%llx, rsp_lo: 0x%llx\n",
+ __func__, mmc->dev->name, rsp_sts.u,
+ read_csr(mmc, MIO_EMM_INT()),
+ read_csr(mmc, MIO_EMM_DMA_INT()),
+ read_csr(mmc, MIO_EMM_RSP_LO()));
+ pr_err("%s: block count: %lu, start: 0x%lx\n",
+ __func__, blkcnt, start);
+ octeontx_mmc_print_registers(mmc);
+ return 0;
+ }
+ } else {
+ count = blkcnt;
+ timeout = 1000;
+ do {
+ octeontx_mmc_start_dma(mmc, false, false, start,
+ dma_addr, 1, timeout);
+ dma_addr += mmc->read_bl_len;
+ start++;
+
+ timed_out = !!octeontx_mmc_wait_dma(mmc, false,
+ timeout, verbose);
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ if (timed_out || rsp_sts.s.dma_val ||
+ rsp_sts.s.dma_pend) {
+ if (verbose) {
+ pr_err("%s: Error: DMA timed out. rsp_sts: 0x%llx, emm_int: 0x%llx, dma_int: 0x%llx, rsp_lo: 0x%llx\n",
+ __func__, rsp_sts.u,
+ read_csr(mmc, MIO_EMM_INT()),
+ read_csr(mmc, MIO_EMM_DMA_INT()),
+ read_csr(mmc, MIO_EMM_RSP_LO()));
+ pr_err("%s: block count: 1, start: 0x%lx\n",
+ __func__, start);
+ octeontx_mmc_print_registers(mmc);
+ }
+ return blkcnt - count;
+ }
+ WATCHDOG_RESET();
+ } while (--count);
+ }
+#ifdef DEBUG
+ debug("%s(%s): Read %lu (0x%lx) blocks starting at block %u (0x%x) to address %p (dma address 0x%llx)\n",
+ __func__, mmc->dev->name, blkcnt, blkcnt,
+ cmd->cmdarg, cmd->cmdarg, data->dest,
+ dm_pci_virt_to_mem(host->dev, data->dest));
+ print_buffer(0, data->dest, 1, 0x200, 0);
+#endif
+ return blkcnt;
+}
+
+static int octeontx_mmc_poll_ready(struct mmc *mmc, ulong timeout)
+{
+ ulong start;
+ struct mmc_cmd cmd;
+ int err;
+ bool not_ready = false;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmdidx = MMC_CMD_SEND_STATUS;
+ cmd.cmdarg = mmc->rca << 16;
+ cmd.resp_type = MMC_RSP_R1;
+ start = get_timer(0);
+ do {
+ err = octeontx_mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ pr_err("%s(%s): MMC command error: %d; Retry...\n",
+ __func__, mmc->dev->name, err);
+ not_ready = true;
+ } else if (cmd.response[0] & R1_READY_FOR_DATA) {
+ return 0;
+ }
+ WATCHDOG_RESET();
+ } while (get_timer(start) < timeout);
+
+ if (not_ready)
+ pr_err("%s(%s): MMC command error; Retry timeout\n",
+ __func__, mmc->dev->name);
+ return -ETIMEDOUT;
+}
+
+static ulong octeontx_mmc_write_blocks(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ ulong start = cmd->cmdarg;
+ ulong blkcnt = data->blocks;
+ dma_addr_t dma_addr;
+ union mio_emm_rsp_sts rsp_sts;
+ union mio_emm_sts_mask emm_sts_mask;
+ ulong timeout;
+ int count;
+ bool timed_out = false;
+ bool multi_xfer = (blkcnt > 1) &&
+ ((IS_SD(mmc) && mmc->scr[0] & 2) || !IS_SD(mmc));
+
+ octeontx_mmc_switch_to(mmc);
+ emm_sts_mask.u = 0;
+ emm_sts_mask.s.sts_msk = R1_BLOCK_WRITE_MASK;
+ write_csr(mmc, MIO_EMM_STS_MASK(), emm_sts_mask.u);
+
+ if (octeontx_mmc_poll_ready(mmc, 10000)) {
+ pr_err("%s(%s): Ready timed out\n", __func__, mmc->dev->name);
+ return 0;
+ }
+ flush_dcache_range((u64)data->src,
+ (u64)data->src + blkcnt * mmc->write_bl_len);
+ dma_addr = (u64)dm_pci_virt_to_mem(host->dev, (void *)data->src);
+ if (multi_xfer) {
+ timeout = 5000 + 100 * blkcnt;
+ octeontx_mmc_start_dma(mmc, true, false, start, dma_addr,
+ blkcnt, timeout);
+ timed_out = !!octeontx_mmc_wait_dma(mmc, true, timeout, true);
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ if (timed_out || rsp_sts.s.dma_val || rsp_sts.s.dma_pend) {
+ pr_err("%s(%s): Error: multi-DMA timed out after %lums. rsp_sts: 0x%llx, emm_int: 0x%llx, emm_dma_int: 0x%llx, rsp_sts_lo: 0x%llx, emm_dma: 0x%llx\n",
+ __func__, mmc->dev->name, timeout,
+ rsp_sts.u,
+ read_csr(mmc, MIO_EMM_INT()),
+ read_csr(mmc, MIO_EMM_DMA_INT()),
+ read_csr(mmc, MIO_EMM_RSP_LO()),
+ read_csr(mmc, MIO_EMM_DMA()));
+ return 0;
+ }
+ } else {
+ timeout = 5000;
+ count = blkcnt;
+ do {
+ octeontx_mmc_start_dma(mmc, true, false, start,
+ dma_addr, 1, timeout);
+ dma_addr += mmc->read_bl_len;
+ start++;
+
+ timed_out = !!octeontx_mmc_wait_dma(mmc, true, timeout,
+ true);
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ if (timed_out || rsp_sts.s.dma_val ||
+ rsp_sts.s.dma_pend) {
+ pr_err("%s(%s): Error: single-DMA timed out after %lums. rsp_sts: 0x%llx, emm_int: 0x%llx, emm_dma_int: 0x%llx, rsp_sts_lo: 0x%llx, emm_dma: 0x%llx\n",
+ __func__, mmc->dev->name, timeout,
+ rsp_sts.u,
+ read_csr(mmc, MIO_EMM_RSP_STS()),
+ read_csr(mmc, MIO_EMM_DMA_INT()),
+ read_csr(mmc, MIO_EMM_RSP_LO()),
+ read_csr(mmc, MIO_EMM_DMA()));
+ return blkcnt - count;
+ }
+ WATCHDOG_RESET();
+ } while (--count);
+ }
+
+ return blkcnt;
+}
+
+/**
+ * Send a command to the eMMC/SD device
+ *
+ * @param mmc mmc device
+ * @param cmd cmd to send and response
+ * @param data additional data
+ * @param flags
+ * @return 0 for success, otherwise error
+ */
+static int octeontx_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ const char *name = slot->dev->name;
+ struct octeontx_mmc_cr_mods mods = {0, 0};
+ union mio_emm_rsp_sts rsp_sts;
+ union mio_emm_cmd emm_cmd;
+ union mio_emm_rsp_lo rsp_lo;
+ union mio_emm_buf_idx emm_buf_idx;
+ union mio_emm_buf_dat emm_buf_dat;
+ ulong start;
+ int i;
+ ulong blkcnt;
+
+ /**
+ * This constant has a 1 bit for each command which should have a short
+ * timeout and a 0 for each bit with a long timeout. Currently the
+ * following commands have a long timeout:
+ * CMD6, CMD17, CMD18, CMD24, CMD25, CMD32, CMD33, CMD35, CMD36 and
+ * CMD38.
+ */
+ static const u64 timeout_short = 0xFFFFFFA4FCF9FFDFull;
+ uint timeout;
+
+ if (cmd->cmdidx == MMC_CMD_SEND_EXT_CSD) {
+ union mio_emm_rca emm_rca;
+
+ emm_rca.u = 0;
+ emm_rca.s.card_rca = mmc->rca;
+ write_csr(mmc, MIO_EMM_RCA(), emm_rca.u);
+ }
+
+ if (timeout_short & (1ull << cmd->cmdidx))
+ timeout = MMC_TIMEOUT_SHORT;
+ else if (cmd->cmdidx == MMC_CMD_SWITCH && IS_SD(mmc))
+ timeout = 2560;
+ else if (cmd->cmdidx == MMC_CMD_ERASE)
+ timeout = MMC_TIMEOUT_ERASE;
+ else
+ timeout = MMC_TIMEOUT_LONG;
+
+ debug("%s(%s): cmd idx: %u, arg: 0x%x, resp type: 0x%x, timeout: %u\n",
+ __func__, name, cmd->cmdidx, cmd->cmdarg, cmd->resp_type,
+ timeout);
+ if (data)
+ debug(" data: addr: %p, flags: 0x%x, blocks: %u, blocksize: %u\n",
+ data->dest, data->flags, data->blocks, data->blocksize);
+
+ octeontx_mmc_switch_to(mmc);
+
+ /* Clear any interrupts */
+ write_csr(mmc, MIO_EMM_INT(), read_csr(mmc, MIO_EMM_INT()));
+
+ /*
+ * We need to override the default command types and response types
+ * when dealing with SD cards.
+ */
+ mods = octeontx_mmc_get_cr_mods(mmc, cmd, data);
+
+ /* Handle block read/write/stop operations */
+ switch (cmd->cmdidx) {
+ case MMC_CMD_GO_IDLE_STATE:
+ slot->tuned = false;
+ slot->hs200_tuned = false;
+ slot->hs400_tuned = false;
+ break;
+ case MMC_CMD_STOP_TRANSMISSION:
+ return 0;
+ case MMC_CMD_READ_MULTIPLE_BLOCK:
+ case MMC_CMD_READ_SINGLE_BLOCK:
+ pr_debug("%s(%s): Reading blocks\n", __func__, name);
+ blkcnt = octeontx_mmc_read_blocks(mmc, cmd, data, true);
+ return (blkcnt > 0) ? 0 : -1;
+ case MMC_CMD_WRITE_MULTIPLE_BLOCK:
+ case MMC_CMD_WRITE_SINGLE_BLOCK:
+ blkcnt = octeontx_mmc_write_blocks(mmc, cmd, data);
+ return (blkcnt > 0) ? 0 : -1;
+ case MMC_CMD_SELECT_CARD:
+ /* Set the RCA register (is it set automatically?) */
+ if (IS_SD(mmc)) {
+ union mio_emm_rca emm_rca;
+
+ emm_rca.u = 0;
+ emm_rca.s.card_rca = (cmd->cmdarg >> 16);
+ write_csr(mmc, MIO_EMM_RCA(), emm_rca.u);
+ debug("%s: Set SD relative address (RCA) to 0x%x\n",
+ __func__, emm_rca.s.card_rca);
+ }
+ break;
+
+ case MMC_CMD_SWITCH:
+ if (!data && !slot->is_acmd)
+ octeontx_mmc_track_switch(mmc, cmd->cmdarg);
+ break;
+ }
+
+ emm_cmd.u = 0;
+ emm_cmd.s.cmd_val = 1;
+ emm_cmd.s.bus_id = slot->bus_id;
+ emm_cmd.s.cmd_idx = cmd->cmdidx;
+ emm_cmd.s.arg = cmd->cmdarg;
+ emm_cmd.s.ctype_xor = mods.ctype_xor;
+ emm_cmd.s.rtype_xor = mods.rtype_xor;
+ if (data && data->blocks == 1 && data->blocksize != 512) {
+ emm_cmd.s.offset =
+ 64 - ((data->blocks * data->blocksize) / 8);
+ debug("%s: offset set to %u\n", __func__, emm_cmd.s.offset);
+ }
+
+ if (data && data->flags & MMC_DATA_WRITE) {
+ u8 *src = (u8 *)data->src;
+
+ if (!src) {
+ pr_err("%s(%s): Error: data source for cmd 0x%x is NULL!\n",
+ __func__, name, cmd->cmdidx);
+ return -1;
+ }
+ if (data->blocksize > 512) {
+ pr_err("%s(%s): Error: data for cmd 0x%x exceeds 512 bytes\n",
+ __func__, name, cmd->cmdidx);
+ return -1;
+ }
+#ifdef DEBUG
+ debug("%s: Sending %d bytes data\n", __func__, data->blocksize);
+ print_buffer(0, src, 1, data->blocksize, 0);
+#endif
+ emm_buf_idx.u = 0;
+ emm_buf_idx.s.inc = 1;
+ write_csr(mmc, MIO_EMM_BUF_IDX(), emm_buf_idx.u);
+ for (i = 0; i < (data->blocksize + 7) / 8; i++) {
+ memcpy(&emm_buf_dat.u, src, sizeof(emm_buf_dat.u));
+ write_csr(mmc, MIO_EMM_BUF_DAT(),
+ cpu_to_be64(emm_buf_dat.u));
+ src += sizeof(emm_buf_dat.u);
+ }
+ write_csr(mmc, MIO_EMM_BUF_IDX(), 0);
+ }
+ debug("%s(%s): Sending command %u (emm_cmd: 0x%llx)\n", __func__,
+ name, cmd->cmdidx, emm_cmd.u);
+ set_wdog(mmc, timeout * 1000);
+ write_csr(mmc, MIO_EMM_CMD(), emm_cmd.u);
+
+ /* Wait for command to finish or time out */
+ start = get_timer(0);
+ do {
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ WATCHDOG_RESET();
+ } while (!rsp_sts.s.cmd_done && !rsp_sts.s.rsp_timeout &&
+ (get_timer(start) < timeout + 10));
+ octeontx_mmc_print_rsp_errors(mmc, rsp_sts);
+ if (rsp_sts.s.rsp_timeout || !rsp_sts.s.cmd_done) {
+ debug("%s(%s): Error: command %u(0x%x) timed out. rsp_sts: 0x%llx\n",
+ __func__, name, cmd->cmdidx, cmd->cmdarg, rsp_sts.u);
+ octeontx_mmc_print_registers(mmc);
+ return -ETIMEDOUT;
+ }
+ if (rsp_sts.s.rsp_crc_err) {
+ debug("%s(%s): RSP CRC error, rsp_sts: 0x%llx, cmdidx: %u, arg: 0x%08x\n",
+ __func__, name, rsp_sts.u, cmd->cmdidx, cmd->cmdarg);
+ octeontx_mmc_print_registers(mmc);
+ return -1;
+ }
+ if (slot->bus_id != rsp_sts.s.bus_id) {
+ pr_warn("%s(%s): bus id mismatch, got %d, expected %d for command 0x%x(0x%x)\n",
+ __func__, name,
+ rsp_sts.s.bus_id, slot->bus_id,
+ cmd->cmdidx, cmd->cmdarg);
+ goto error;
+ }
+ if (rsp_sts.s.rsp_bad_sts) {
+ rsp_lo.u = read_csr(mmc, MIO_EMM_RSP_LO());
+ debug("%s: Bad response for bus id %d, cmd id %d:\n"
+ " rsp_timeout: %d\n"
+ " rsp_bad_sts: %d\n"
+ " rsp_crc_err: %d\n",
+ __func__, slot->bus_id, cmd->cmdidx,
+ rsp_sts.s.rsp_timeout,
+ rsp_sts.s.rsp_bad_sts,
+ rsp_sts.s.rsp_crc_err);
+ if (rsp_sts.s.rsp_type == 1 && rsp_sts.s.rsp_bad_sts) {
+ debug(" Response status: 0x%llx\n",
+ (rsp_lo.u >> 8) & 0xffffffff);
+#ifdef DEBUG
+ mmc_print_status((rsp_lo.u >> 8) & 0xffffffff);
+#endif
+ }
+ goto error;
+ }
+ if (rsp_sts.s.cmd_idx != cmd->cmdidx) {
+ debug("%s(%s): Command response index %d does not match command index %d\n",
+ __func__, name, rsp_sts.s.cmd_idx, cmd->cmdidx);
+ octeontx_print_rsp_sts(mmc);
+ debug("%s: rsp_lo: 0x%llx\n", __func__,
+ read_csr(mmc, MIO_EMM_RSP_LO()));
+
+ goto error;
+ }
+
+ slot->is_acmd = (cmd->cmdidx == MMC_CMD_APP_CMD);
+
+ if (!cmd->resp_type & MMC_RSP_PRESENT)
+ debug(" Response type: 0x%x, no response expected\n",
+ cmd->resp_type);
+ /* Get the response if present */
+ if (rsp_sts.s.rsp_val && (cmd->resp_type & MMC_RSP_PRESENT)) {
+ union mio_emm_rsp_hi rsp_hi;
+
+ rsp_lo.u = read_csr(mmc, MIO_EMM_RSP_LO());
+
+ switch (rsp_sts.s.rsp_type) {
+ case 1:
+ case 3:
+ case 4:
+ case 5:
+ cmd->response[0] = (rsp_lo.u >> 8) & 0xffffffffull;
+ debug(" response: 0x%08x\n",
+ cmd->response[0]);
+ cmd->response[1] = 0;
+ cmd->response[2] = 0;
+ cmd->response[3] = 0;
+ break;
+ case 2:
+ cmd->response[3] = rsp_lo.u & 0xffffffff;
+ cmd->response[2] = (rsp_lo.u >> 32) & 0xffffffff;
+ rsp_hi.u = read_csr(mmc, MIO_EMM_RSP_HI());
+ cmd->response[1] = rsp_hi.u & 0xffffffff;
+ cmd->response[0] = (rsp_hi.u >> 32) & 0xffffffff;
+ debug(" response: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ cmd->response[0], cmd->response[1],
+ cmd->response[2], cmd->response[3]);
+ break;
+ default:
+ pr_err("%s(%s): Unknown response type 0x%x for command %d, arg: 0x%x, rsp_sts: 0x%llx\n",
+ __func__, name, rsp_sts.s.rsp_type, cmd->cmdidx,
+ cmd->cmdarg, rsp_sts.u);
+ return -1;
+ }
+ } else {
+ debug(" Response not expected\n");
+ }
+
+ if (data && data->flags & MMC_DATA_READ) {
+ u8 *dest = (u8 *)data->dest;
+
+ if (!dest) {
+ pr_err("%s(%s): Error, destination buffer NULL!\n",
+ __func__, mmc->dev->name);
+ goto error;
+ }
+ if (data->blocksize > 512) {
+ printf("%s(%s): Error: data size %u exceeds 512\n",
+ __func__, mmc->dev->name,
+ data->blocksize);
+ goto error;
+ }
+ emm_buf_idx.u = 0;
+ emm_buf_idx.s.inc = 1;
+ write_csr(mmc, MIO_EMM_BUF_IDX(), emm_buf_idx.u);
+ for (i = 0; i < (data->blocksize + 7) / 8; i++) {
+ emm_buf_dat.u = read_csr(mmc, MIO_EMM_BUF_DAT());
+ emm_buf_dat.u = be64_to_cpu(emm_buf_dat.u);
+ memcpy(dest, &emm_buf_dat.u, sizeof(emm_buf_dat.u));
+ dest += sizeof(emm_buf_dat.u);
+ }
+ write_csr(mmc, MIO_EMM_BUF_IDX(), 0);
+#ifdef DEBUG
+ debug("%s: Received %d bytes data\n", __func__,
+ data->blocksize);
+ print_buffer(0, data->dest, 1, data->blocksize, 0);
+#endif
+ }
+
+ return 0;
+error:
+#ifdef DEBUG
+ octeontx_mmc_print_registers(mmc);
+#endif
+ return -1;
+}
+
+static int octeontx_mmc_dev_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ return octeontx_mmc_send_cmd(dev_to_mmc(dev), cmd, data);
+}
+
+#ifdef MMC_SUPPORTS_TUNING
+static int octeontx_mmc_test_cmd(struct mmc *mmc, u32 opcode, int *statp)
+{
+ struct mmc_cmd cmd;
+ int err;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ debug("%s(%s, %u, %p)\n", __func__, mmc->dev->name, opcode, statp);
+ cmd.cmdidx = opcode;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = mmc->rca << 16;
+
+ err = octeontx_mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ debug("%s(%s, %u) returned %d\n", __func__,
+ mmc->dev->name, opcode, err);
+ if (statp)
+ *statp = cmd.response[0];
+ return err;
+}
+
+static int octeontx_mmc_test_get_ext_csd(struct mmc *mmc, u32 opcode,
+ int *statp)
+{
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+ int err;
+ u8 ext_csd[MMC_MAX_BLOCK_LEN];
+
+ debug("%s(%s, %u, %p)\n", __func__, mmc->dev->name, opcode, statp);
+ memset(&cmd, 0, sizeof(cmd));
+
+ cmd.cmdidx = MMC_CMD_SEND_EXT_CSD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 0;
+
+ data.dest = (char *)ext_csd;
+ data.blocks = 1;
+ data.blocksize = MMC_MAX_BLOCK_LEN;
+ data.flags = MMC_DATA_READ;
+
+ err = octeontx_mmc_send_cmd(mmc, &cmd, &data);
+ if (statp)
+ *statp = cmd.response[0];
+
+ return err;
+}
+
+/**
+ * Wrapper to set the MIO_EMM_TIMING register
+ *
+ * @param mmc pointer to mmc data structure
+ * @param emm_timing New emm_timing register value
+ *
+ * On some devices it is possible that changing the data out value can
+ * cause a glitch on an internal fifo. This works around this problem
+ * by performing a soft-reset immediately before setting the timing register.
+ *
+ * Note: this function should not be called from any function that
+ * performs DMA or block operations since not all registers are
+ * preserved.
+ */
+static void octeontx_mmc_set_emm_timing(struct mmc *mmc,
+ union mio_emm_timing emm_timing)
+{
+ union mio_emm_cfg emm_cfg;
+ struct octeontx_mmc_slot *slot = mmc->priv;
+ union mio_emm_debug emm_debug;
+
+ debug("%s(%s, 0x%llx) din: %u\n", __func__, mmc->dev->name,
+ emm_timing.u, emm_timing.s.data_in_tap);
+
+ udelay(1);
+ if (slot->host->tap_requires_noclk) {
+ /* Turn off the clock */
+ emm_debug.u = read_csr(mmc, MIO_EMM_DEBUG());
+ emm_debug.s.emmc_clk_disable = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ emm_debug.s.rdsync_rst = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ }
+ emm_cfg.u = read_csr(mmc, MIO_EMM_CFG());
+ emm_cfg.s.bus_ena = 1 << 3;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+
+ udelay(1);
+ write_csr(mmc, MIO_EMM_TIMING(), emm_timing.u);
+ udelay(1);
+
+ if (slot->host->tap_requires_noclk) {
+ /* Turn on the clock */
+ emm_debug.s.rdsync_rst = 0;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ emm_debug.s.emmc_clk_disable = 0;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ }
+ emm_cfg.s.bus_ena = 1 << mmc_to_slot(mmc)->bus_id;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+}
+
+static const u8 octeontx_hs400_tuning_block[512] = {
+ 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
+ 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
+ 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+ 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+ 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+ 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+ 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+ 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+ 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
+ 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
+ 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
+ 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+ 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+ 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+ 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+ 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+ 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
+ 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
+ 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+ 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+ 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+ 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+ 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+ 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+ 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
+ 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
+ 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
+ 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+ 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+ 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+ 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+ 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+ 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
+ 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
+ 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+ 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+ 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+ 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+ 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+ 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+ 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
+ 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
+ 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
+ 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+ 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+ 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+ 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+ 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+ 0xff, 0x00, 0x00, 0xff, 0xff, 0x00, 0xff, 0x00,
+ 0x00, 0xff, 0x00, 0xff, 0x55, 0xaa, 0x55, 0xaa,
+ 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+ 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+ 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+ 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+ 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+ 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+ 0xff, 0x00, 0xff, 0x00, 0xff, 0x00, 0xff, 0x00,
+ 0x00, 0xff, 0x00, 0xff, 0x00, 0xff, 0x00, 0xff,
+ 0x01, 0xfe, 0x01, 0xfe, 0xcc, 0xcc, 0xcc, 0xff,
+ 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+ 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+ 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+ 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+ 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+
+};
+
+/**
+ * Perform tuning in HS400 mode
+ *
+ * @param[in] mmc mmc data structure
+ *
+ * @ret 0 for success, otherwise error
+ */
+static int octeontx_tune_hs400(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+ union mio_emm_timing emm_timing;
+ u8 buffer[mmc->read_bl_len];
+ int tap_adj;
+ int err = -1;
+ int tap;
+ int run = 0;
+ int start_run = -1;
+ int best_run = 0;
+ int best_start = -1;
+ bool prev_ok = false;
+ char env_name[64];
+ char how[MAX_NO_OF_TAPS + 1] = "";
+
+ if (slot->hs400_tuning_block == -1)
+ return 0;
+
+ /* The eMMC standard disables all tuning support when operating in
+ * DDR modes like HS400. The problem with this is that there are
+ * many cases where the HS200 tuning does not work for HS400 mode.
+ * In order to perform this tuning, while in HS200 a block is written
+ * to a block specified in the device tree (marvell,hs400-tuning-block)
+ * which is used for tuning in this function by repeatedly reading
+ * this block and comparing the data and return code. This function
+ * chooses the data input tap in the middle of the longest run of
+ * successful read operations.
+ */
+
+ emm_timing = slot->hs200_taps;
+ debug("%s(%s): Start ci: %d, co: %d, di: %d, do: %d\n",
+ __func__, mmc->dev->name, emm_timing.s.cmd_in_tap,
+ emm_timing.s.cmd_out_tap, emm_timing.s.data_in_tap,
+ emm_timing.s.data_out_tap);
+ memset(buffer, 0xdb, sizeof(buffer));
+
+ snprintf(env_name, sizeof(env_name), "emmc%d_data_in_tap_hs400",
+ slot->bus_id);
+ tap = env_get_ulong(env_name, 10, -1L);
+ if (tap >= 0 && tap < MAX_NO_OF_TAPS) {
+ printf("Overriding data input tap for HS400 mode to %d\n", tap);
+ emm_timing.s.data_in_tap = tap;
+ octeontx_mmc_set_emm_timing(mmc, emm_timing);
+ return 0;
+ }
+
+ for (tap = 0; tap <= MAX_NO_OF_TAPS; tap++, prev_ok = !err) {
+ if (tap < MAX_NO_OF_TAPS) {
+ debug("%s: Testing data in tap %d\n", __func__, tap);
+ emm_timing.s.data_in_tap = tap;
+ octeontx_mmc_set_emm_timing(mmc, emm_timing);
+
+ cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
+ cmd.cmdarg = slot->hs400_tuning_block;
+ cmd.resp_type = MMC_RSP_R1;
+ data.dest = (void *)buffer;
+ data.blocks = 1;
+ data.blocksize = mmc->read_bl_len;
+ data.flags = MMC_DATA_READ;
+ err = !octeontx_mmc_read_blocks(mmc, &cmd, &data,
+ false);
+ if (err || memcmp(buffer, octeontx_hs400_tuning_block,
+ sizeof(buffer))) {
+#ifdef DEBUG
+ if (!err) {
+ debug("%s: data mismatch. Read:\n",
+ __func__);
+ print_buffer(0, buffer, 1,
+ sizeof(buffer), 0);
+ debug("\nExpected:\n");
+ print_buffer(0,
+ octeontx_hs400_tuning_block, 1,
+ sizeof(octeontx_hs400_tuning_block),
+ 0);
+ } else {
+ debug("%s: Error %d reading block\n",
+ __func__, err);
+ }
+#endif
+ err = -EINVAL;
+ } else {
+ debug("%s: tap %d good\n", __func__, tap);
+ }
+ how[tap] = "-+"[!err];
+ } else {
+ err = -EINVAL;
+ }
+
+ if (!err) {
+ if (!prev_ok)
+ start_run = tap;
+ } else if (prev_ok) {
+ run = tap - 1 - start_run;
+ if (start_run >= 0 && run > best_run) {
+ best_start = start_run;
+ best_run = run;
+ }
+ }
+ }
+
+ how[tap - 1] = '\0';
+ if (best_start < 0) {
+ printf("%s(%s): %lldMHz tuning failed for HS400\n",
+ __func__, mmc->dev->name, slot->clock / 1000000);
+ return -EINVAL;
+ }
+ tap = best_start + best_run / 2;
+
+ snprintf(env_name, sizeof(env_name), "emmc%d_data_in_tap_adj_hs400",
+ slot->bus_id);
+ tap_adj = env_get_ulong(env_name, 10, slot->hs400_tap_adj);
+ /*
+ * Keep it in range and if out of range force it back in with a small
+ * buffer.
+ */
+ if (best_run > 3) {
+ tap = tap + tap_adj;
+ if (tap >= best_start + best_run)
+ tap = best_start + best_run - 2;
+ if (tap <= best_start)
+ tap = best_start + 2;
+ }
+ how[tap] = '@';
+ debug("Tuning: %s\n", how);
+ debug("%s(%s): HS400 tap: best run start: %d, length: %d, tap: %d\n",
+ __func__, mmc->dev->name, best_start, best_run, tap);
+ slot->hs400_taps = slot->hs200_taps;
+ slot->hs400_taps.s.data_in_tap = tap;
+ slot->hs400_tuned = true;
+ if (env_get_yesno("emmc_export_hs400_taps") > 0) {
+ debug("%s(%s): Exporting HS400 taps\n",
+ __func__, mmc->dev->name);
+ env_set_ulong("emmc_timing_tap", slot->host->timing_taps);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_data_in_tap_debug",
+ slot->bus_id);
+ env_set(env_name, how);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_data_in_tap_val",
+ slot->bus_id);
+ env_set_ulong(env_name, tap);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_data_in_tap_start",
+ slot->bus_id);
+ env_set_ulong(env_name, best_start);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_data_in_tap_end",
+ slot->bus_id);
+ env_set_ulong(env_name, best_start + best_run);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_cmd_in_tap",
+ slot->bus_id);
+ env_set_ulong(env_name, slot->hs400_taps.s.cmd_in_tap);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_cmd_out_tap",
+ slot->bus_id);
+ env_set_ulong(env_name, slot->hs400_taps.s.cmd_out_tap);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_cmd_out_delay",
+ slot->bus_id);
+ env_set_ulong(env_name, slot->cmd_out_hs400_delay);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_data_out_tap",
+ slot->bus_id);
+ env_set_ulong(env_name, slot->hs400_taps.s.data_out_tap);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs400_data_out_delay",
+ slot->bus_id);
+ env_set_ulong(env_name, slot->data_out_hs400_delay);
+ } else {
+ debug("%s(%s): HS400 environment export disabled\n",
+ __func__, mmc->dev->name);
+ }
+ octeontx_mmc_set_timing(mmc);
+
+ return 0;
+}
+
+struct adj {
+ const char *name;
+ u8 mask_shift;
+ int (*test)(struct mmc *mmc, u32 opcode, int *error);
+ u32 opcode;
+ bool ddr_only;
+ bool hs200_only;
+ bool not_hs200_only;
+ u8 num_runs;
+};
+
+struct adj adj[] = {
+ { "CMD_IN", 48, octeontx_mmc_test_cmd, MMC_CMD_SEND_STATUS,
+ false, false, false, 2, },
+/* { "CMD_OUT", 32, octeontx_mmc_test_cmd, MMC_CMD_SEND_STATUS, },*/
+ { "DATA_IN(HS200)", 16, mmc_send_tuning,
+ MMC_CMD_SEND_TUNING_BLOCK_HS200, false, true, false, 2, },
+ { "DATA_IN", 16, octeontx_mmc_test_get_ext_csd, 0, false, false,
+ true, 2, },
+/* { "DATA_OUT", 0, octeontx_mmc_test_cmd, 0, true, false},*/
+ { NULL, },
+};
+
+/**
+ * Perform tuning tests to find optimal timing
+ *
+ * @param mmc mmc device
+ * @param adj parameter to tune
+ * @param opcode command opcode to use
+ *
+ * @return 0 for success, -1 if tuning failed
+ */
+static int octeontx_mmc_adjust_tuning(struct mmc *mmc, struct adj *adj,
+ u32 opcode)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ union mio_emm_timing timing;
+ union mio_emm_debug emm_debug;
+ int tap;
+ int err = -1;
+ int run = 0;
+ int count;
+ int start_run = -1;
+ int best_run = 0;
+ int best_start = -1;
+ bool prev_ok = false;
+ u64 tap_status = 0;
+ const int tap_adj = slot->hs200_tap_adj;
+ char how[MAX_NO_OF_TAPS + 1] = "";
+ bool is_hs200 = mmc->selected_mode == MMC_HS_200;
+
+ debug("%s(%s, %s, %d), hs200: %d\n", __func__, mmc->dev->name,
+ adj->name, opcode, is_hs200);
+ octeontx_mmc_set_emm_timing(mmc,
+ is_hs200 ? slot->hs200_taps : slot->taps);
+
+#ifdef DEBUG
+ if (opcode == MMC_CMD_SEND_TUNING_BLOCK_HS200) {
+ printf("%s(%s): Before tuning %s, opcode: %d\n",
+ __func__, mmc->dev->name, adj->name, opcode);
+ octeontx_mmc_print_registers2(mmc, NULL);
+ }
+#endif
+
+ /*
+ * The algorithm to find the optimal timing is to start
+ * at the end and work backwards and select the second
+ * value that passes. Each test is repeated twice.
+ */
+ for (tap = 0; tap <= MAX_NO_OF_TAPS; tap++, prev_ok = !err) {
+ if (tap < MAX_NO_OF_TAPS) {
+ if (slot->host->tap_requires_noclk) {
+ /* Turn off the clock */
+ emm_debug.u = read_csr(mmc, MIO_EMM_DEBUG());
+ emm_debug.s.emmc_clk_disable = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ emm_debug.s.rdsync_rst = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ }
+
+ timing.u = read_csr(mmc, MIO_EMM_TIMING());
+ timing.u &= ~(0x3full << adj->mask_shift);
+ timing.u |= (u64)tap << adj->mask_shift;
+ write_csr(mmc, MIO_EMM_TIMING(), timing.u);
+ debug("%s(%s): Testing ci: %d, co: %d, di: %d, do: %d\n",
+ __func__, mmc->dev->name, timing.s.cmd_in_tap,
+ timing.s.cmd_out_tap, timing.s.data_in_tap,
+ timing.s.data_out_tap);
+
+ if (slot->host->tap_requires_noclk) {
+ /* Turn off the clock */
+ emm_debug.s.rdsync_rst = 0;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ emm_debug.u = read_csr(mmc, MIO_EMM_DEBUG());
+ emm_debug.s.emmc_clk_disable = 0;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ }
+ for (count = 0; count < 2; count++) {
+ err = adj->test(mmc, opcode, NULL);
+ if (err) {
+ debug("%s(%s, %s): tap %d failed, count: %d, rsp_sts: 0x%llx, rsp_lo: 0x%llx\n",
+ __func__, mmc->dev->name,
+ adj->name, tap, count,
+ read_csr(mmc,
+ MIO_EMM_RSP_STS()),
+ read_csr(mmc,
+ MIO_EMM_RSP_LO()));
+ debug("%s(%s, %s): tap: %d, do: %d, di: %d, co: %d, ci: %d\n",
+ __func__, mmc->dev->name,
+ adj->name, tap,
+ timing.s.data_out_tap,
+ timing.s.data_in_tap,
+ timing.s.cmd_out_tap,
+ timing.s.cmd_in_tap);
+ break;
+ }
+ debug("%s(%s, %s): tap %d passed, count: %d, rsp_sts: 0x%llx, rsp_lo: 0x%llx\n",
+ __func__, mmc->dev->name, adj->name, tap,
+ count,
+ read_csr(mmc, MIO_EMM_RSP_STS()),
+ read_csr(mmc, MIO_EMM_RSP_LO()));
+ }
+ tap_status |= (u64)(!err) << tap;
+ how[tap] = "-+"[!err];
+ } else {
+ /*
+ * Putting the end+1 case in the loop simplifies
+ * logic, allowing 'prev_ok' to process a sweet
+ * spot in tuning which extends to the wall.
+ */
+ err = -EINVAL;
+ }
+ if (!err) {
+ /*
+ * If no CRC/etc errors in the response, but previous
+ * failed, note the start of a new run.
+ */
+ debug(" prev_ok: %d\n", prev_ok);
+ if (!prev_ok)
+ start_run = tap;
+ } else if (prev_ok) {
+ run = tap - 1 - start_run;
+ /* did we just exit a wider sweet spot? */
+ if (start_run >= 0 && run > best_run) {
+ best_start = start_run;
+ best_run = run;
+ }
+ }
+ }
+ how[tap - 1] = '\0';
+ if (best_start < 0) {
+ printf("%s(%s, %s): %lldMHz tuning %s failed\n", __func__,
+ mmc->dev->name, adj->name, slot->clock / 1000000,
+ adj->name);
+ return -EINVAL;
+ }
+
+ tap = best_start + best_run / 2;
+ debug(" tap %d is center, start: %d, run: %d\n", tap,
+ best_start, best_run);
+ if (is_hs200) {
+ slot->hs200_taps.u &= ~(0x3full << adj->mask_shift);
+ slot->hs200_taps.u |= (u64)tap << adj->mask_shift;
+ } else {
+ slot->taps.u &= ~(0x3full << adj->mask_shift);
+ slot->taps.u |= (u64)tap << adj->mask_shift;
+ }
+ if (best_start < 0) {
+ printf("%s(%s, %s): %lldMHz tuning %s failed\n", __func__,
+ mmc->dev->name, adj->name, slot->clock / 1000000,
+ adj->name);
+ return -EINVAL;
+ }
+
+ tap = best_start + best_run / 2;
+ if (is_hs200 && (tap + tap_adj >= 0) && (tap + tap_adj < 64) &&
+ tap_status & (1ULL << (tap + tap_adj))) {
+ debug("Adjusting tap from %d by %d to %d\n",
+ tap, tap_adj, tap + tap_adj);
+ tap += tap_adj;
+ }
+ how[tap] = '@';
+ debug("%s/%s %d/%d/%d %s\n", mmc->dev->name,
+ adj->name, best_start, tap, best_start + best_run, how);
+
+ if (is_hs200) {
+ slot->hs200_taps.u &= ~(0x3full << adj->mask_shift);
+ slot->hs200_taps.u |= (u64)tap << adj->mask_shift;
+ } else {
+ slot->taps.u &= ~(0x3full << adj->mask_shift);
+ slot->taps.u |= (u64)tap << adj->mask_shift;
+ }
+
+#ifdef DEBUG
+ if (opcode == MMC_CMD_SEND_TUNING_BLOCK_HS200) {
+ debug("%s(%s, %s): After successful tuning\n",
+ __func__, mmc->dev->name, adj->name);
+ debug("%s(%s, %s): tap: %d, new do: %d, di: %d, co: %d, ci: %d\n",
+ __func__, mmc->dev->name, adj->name, tap,
+ slot->taps.s.data_out_tap,
+ slot->taps.s.data_in_tap,
+ slot->taps.s.cmd_out_tap,
+ slot->taps.s.cmd_in_tap);
+ debug("%s(%s, %s): tap: %d, new do HS200: %d, di: %d, co: %d, ci: %d\n",
+ __func__, mmc->dev->name, adj->name, tap,
+ slot->hs200_taps.s.data_out_tap,
+ slot->hs200_taps.s.data_in_tap,
+ slot->hs200_taps.s.cmd_out_tap,
+ slot->hs200_taps.s.cmd_in_tap);
+ }
+#endif
+ octeontx_mmc_set_timing(mmc);
+
+ if (is_hs200 && env_get_yesno("emmc_export_hs200_taps")) {
+ char env_name[64];
+
+ env_set_ulong("emmc_timing_tap", slot->host->timing_taps);
+ switch (opcode) {
+ case MMC_CMD_SEND_TUNING_BLOCK:
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_data_in_tap_debug",
+ slot->bus_id);
+ env_set(env_name, how);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_data_in_tap_val", slot->bus_id);
+ env_set_ulong(env_name, tap);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_data_in_tap_start",
+ slot->bus_id);
+ env_set_ulong(env_name, best_start);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_data_in_tap_end",
+ slot->bus_id);
+ env_set_ulong(env_name, best_start + best_run);
+ break;
+ case MMC_CMD_SEND_STATUS:
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_cmd_in_tap_debug",
+ slot->bus_id);
+ env_set(env_name, how);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_cmd_in_tap_val", slot->bus_id);
+ env_set_ulong(env_name, tap);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_cmd_in_tap_start",
+ slot->bus_id);
+ env_set_ulong(env_name, best_start);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_cmd_in_tap_end",
+ slot->bus_id);
+ env_set_ulong(env_name, best_start + best_run);
+ break;
+ default:
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_data_out_tap", slot->bus_id);
+ env_set_ulong(env_name, slot->data_out_hs200_delay);
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_hs200_cmd_out_tap", slot->bus_id);
+ env_set_ulong(env_name, slot->cmd_out_hs200_delay);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int octeontx_mmc_execute_tuning(struct udevice *dev, u32 opcode)
+{
+ struct mmc *mmc = dev_to_mmc(dev);
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ union mio_emm_timing emm_timing;
+ int err;
+ struct adj *a;
+ bool is_hs200;
+ char env_name[64];
+
+ pr_info("%s re-tuning, opcode 0x%x\n", dev->name, opcode);
+
+ if (slot->is_asim || slot->is_emul)
+ return 0;
+
+ is_hs200 = (mmc->selected_mode == MMC_HS_200);
+ if (is_hs200) {
+ slot->hs200_tuned = false;
+ slot->hs400_tuned = false;
+ } else {
+ slot->tuned = false;
+ }
+ octeontx_mmc_set_output_bus_timing(mmc);
+ octeontx_mmc_set_input_bus_timing(mmc);
+ emm_timing.u = read_csr(mmc, MIO_EMM_TIMING());
+ if (mmc->selected_mode == MMC_HS_200) {
+ slot->hs200_taps.s.cmd_out_tap = emm_timing.s.cmd_out_tap;
+ slot->hs200_taps.s.data_out_tap = emm_timing.s.data_out_tap;
+ } else {
+ slot->taps.s.cmd_out_tap = emm_timing.s.cmd_out_tap;
+ slot->taps.s.data_out_tap = emm_timing.s.data_out_tap;
+ }
+ octeontx_mmc_set_input_bus_timing(mmc);
+ octeontx_mmc_set_output_bus_timing(mmc);
+
+ for (a = adj; a->name; a++) {
+ ulong in_tap;
+
+ if (!strcmp(a->name, "CMD_IN")) {
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_cmd_in_tap", slot->bus_id);
+ in_tap = env_get_ulong(env_name, 10, (ulong)-1);
+ if (in_tap != (ulong)-1) {
+ if (mmc->selected_mode == MMC_HS_200 ||
+ a->hs200_only) {
+ slot->hs200_taps.s.cmd_in_tap = in_tap;
+ slot->hs400_taps.s.cmd_in_tap = in_tap;
+ } else {
+ slot->taps.s.cmd_in_tap = in_tap;
+ }
+ continue;
+ }
+ } else if (a->hs200_only &&
+ !strcmp(a->name, "DATA_IN(HS200)")) {
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_data_in_tap_hs200", slot->bus_id);
+ in_tap = env_get_ulong(env_name, 10, (ulong)-1);
+ if (in_tap != (ulong)-1) {
+ debug("%s(%s): Overriding HS200 data in tap to %d\n",
+ __func__, dev->name, (int)in_tap);
+ slot->hs200_taps.s.data_in_tap = in_tap;
+ continue;
+ }
+ } else if (!a->hs200_only && !strcmp(a->name, "DATA_IN")) {
+ snprintf(env_name, sizeof(env_name),
+ "emmc%d_data_in_tap", slot->bus_id);
+ in_tap = env_get_ulong(env_name, 10, (ulong)-1);
+ if (in_tap != (ulong)-1) {
+ debug("%s(%s): Overriding non-HS200 data in tap to %d\n",
+ __func__, dev->name, (int)in_tap);
+ slot->taps.s.data_in_tap = in_tap;
+ continue;
+ }
+ }
+
+ debug("%s(%s): Testing: %s, mode: %s, opcode: %u\n", __func__,
+ dev->name, a->name, mmc_mode_name(mmc->selected_mode),
+ opcode);
+
+ /* Skip DDR only test when not in DDR mode */
+ if (a->ddr_only && !mmc->ddr_mode) {
+ debug("%s(%s): Skipping %s due to non-DDR mode\n",
+ __func__, dev->name, a->name);
+ continue;
+ }
+ /* Skip hs200 tests in non-hs200 mode and
+ * non-hs200 tests in hs200 mode
+ */
+ if (is_hs200) {
+ if (a->not_hs200_only) {
+ debug("%s(%s): Skipping %s\n", __func__,
+ dev->name, a->name);
+ continue;
+ }
+ } else {
+ if (a->hs200_only) {
+ debug("%s(%s): Skipping %s\n", __func__,
+ dev->name, a->name);
+ continue;
+ }
+ }
+
+ err = octeontx_mmc_adjust_tuning(mmc, a, a->opcode ?
+ a->opcode : opcode);
+ if (err) {
+ pr_err("%s(%s, %u): tuning %s failed\n", __func__,
+ dev->name, opcode, a->name);
+ return err;
+ }
+ }
+
+ octeontx_mmc_set_timing(mmc);
+ if (is_hs200)
+ slot->hs200_tuned = true;
+ else
+ slot->tuned = true;
+
+ if (slot->hs400_tuning_block != -1) {
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+ u8 buffer[mmc->read_bl_len];
+
+ cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
+ cmd.cmdarg = slot->hs400_tuning_block;
+ cmd.resp_type = MMC_RSP_R1;
+ data.dest = (void *)buffer;
+ data.blocks = 1;
+ data.blocksize = mmc->read_bl_len;
+ data.flags = MMC_DATA_READ;
+ err = octeontx_mmc_read_blocks(mmc, &cmd, &data, true) != 1;
+
+ if (err) {
+ printf("%s: Cannot read HS400 tuning block %u\n",
+ dev->name, slot->hs400_tuning_block);
+ return err;
+ }
+ if (memcmp(buffer, octeontx_hs400_tuning_block,
+ sizeof(buffer))) {
+ debug("%s(%s): Writing new HS400 tuning block to block %d\n",
+ __func__, dev->name, slot->hs400_tuning_block);
+ cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
+ data.src = (void *)octeontx_hs400_tuning_block;
+ data.flags = MMC_DATA_WRITE;
+ err = !octeontx_mmc_write_blocks(mmc, &cmd, &data);
+ if (err) {
+ printf("%s: Cannot write HS400 tuning block %u\n",
+ dev->name, slot->hs400_tuning_block);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+#else /* MMC_SUPPORTS_TUNING */
+static void octeontx_mmc_set_emm_timing(struct mmc *mmc,
+ union mio_emm_timing emm_timing)
+{
+}
+#endif /* MMC_SUPPORTS_TUNING */
+
+/**
+ * Calculate the clock period with rounding up
+ *
+ * @param mmc mmc device
+ * @return clock period in system clocks for clk_lo + clk_hi
+ */
+static u32 octeontx_mmc_calc_clk_period(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct octeontx_mmc_host *host = slot->host;
+
+ return DIV_ROUND_UP(host->sys_freq, mmc->clock);
+}
+
+static int octeontx_mmc_set_ios(struct udevice *dev)
+{
+ struct octeontx_mmc_slot *slot = dev_to_mmc_slot(dev);
+ struct mmc *mmc = &slot->mmc;
+ struct octeontx_mmc_host *host = slot->host;
+ union mio_emm_switch emm_switch;
+ union mio_emm_modex mode;
+ uint clock;
+ int bus_width = 0;
+ int clk_period = 0;
+ int power_class = 10;
+ int err = 0;
+ bool is_hs200 = false;
+ bool is_hs400 = false;
+
+ debug("%s(%s): Entry\n", __func__, dev->name);
+ debug(" clock: %u, bus width: %u, mode: %u\n", mmc->clock,
+ mmc->bus_width, mmc->selected_mode);
+ debug(" host caps: 0x%x, card caps: 0x%x\n", mmc->host_caps,
+ mmc->card_caps);
+ octeontx_mmc_switch_to(mmc);
+
+ clock = mmc->clock;
+ if (!clock)
+ clock = mmc->cfg->f_min;
+
+ switch (mmc->bus_width) {
+ case 8:
+ bus_width = 2;
+ break;
+ case 4:
+ bus_width = 1;
+ break;
+ case 1:
+ bus_width = 0;
+ break;
+ default:
+ pr_warn("%s(%s): Invalid bus width %d, defaulting to 1\n",
+ __func__, dev->name, mmc->bus_width);
+ bus_width = 0;
+ }
+
+ /* DDR is available for 4/8 bit bus width */
+ if (mmc->ddr_mode && bus_width)
+ bus_width |= 4;
+
+ debug("%s: sys_freq: %llu\n", __func__, host->sys_freq);
+ clk_period = octeontx_mmc_calc_clk_period(mmc);
+
+ emm_switch.u = 0;
+ emm_switch.s.bus_width = bus_width;
+ emm_switch.s.power_class = power_class;
+ emm_switch.s.clk_hi = clk_period / 2;
+ emm_switch.s.clk_lo = clk_period / 2;
+
+ debug("%s: last mode: %d, mode: %d, last clock: %u, clock: %u, ddr: %d\n",
+ __func__, slot->last_mode, mmc->selected_mode,
+ slot->last_clock, mmc->clock, mmc->ddr_mode);
+ switch (mmc->selected_mode) {
+ case MMC_LEGACY:
+ break;
+ case MMC_HS:
+ case SD_HS:
+ case MMC_HS_52:
+ emm_switch.s.hs_timing = 1;
+ break;
+ case MMC_HS_200:
+ is_hs200 = true;
+ fallthrough;
+ case UHS_SDR12:
+ case UHS_SDR25:
+ case UHS_SDR50:
+ case UHS_SDR104:
+ emm_switch.s.hs200_timing = 1;
+ break;
+ case MMC_HS_400:
+ is_hs400 = true;
+ fallthrough;
+ case UHS_DDR50:
+ case MMC_DDR_52:
+ emm_switch.s.hs400_timing = 1;
+ break;
+ default:
+ pr_err("%s(%s): Unsupported mode 0x%x\n", __func__, dev->name,
+ mmc->selected_mode);
+ return -1;
+ }
+ emm_switch.s.bus_id = slot->bus_id;
+
+ if (!is_hs200 && !is_hs400 &&
+ (mmc->selected_mode != slot->last_mode ||
+ mmc->clock != slot->last_clock) &&
+ !mmc->ddr_mode) {
+ slot->tuned = false;
+ slot->last_mode = mmc->selected_mode;
+ slot->last_clock = mmc->clock;
+ }
+
+ if (CONFIG_IS_ENABLED(MMC_VERBOSE)) {
+ debug("%s(%s): Setting bus mode to %s\n", __func__, dev->name,
+ mmc_mode_name(mmc->selected_mode));
+ } else {
+ debug("%s(%s): Setting bus mode to 0x%x\n", __func__, dev->name,
+ mmc->selected_mode);
+ }
+
+ debug(" Trying switch 0x%llx w%d hs:%d hs200:%d hs400:%d\n",
+ emm_switch.u, emm_switch.s.bus_width, emm_switch.s.hs_timing,
+ emm_switch.s.hs200_timing, emm_switch.s.hs400_timing);
+
+ set_wdog(mmc, 1000);
+ do_switch(mmc, emm_switch);
+ mdelay(100);
+ mode.u = read_csr(mmc, MIO_EMM_MODEX(slot->bus_id));
+ debug("%s(%s): mode: 0x%llx w:%d, hs:%d, hs200:%d, hs400:%d\n",
+ __func__, dev->name, mode.u, mode.s.bus_width,
+ mode.s.hs_timing, mode.s.hs200_timing, mode.s.hs400_timing);
+
+ err = octeontx_mmc_configure_delay(mmc);
+
+#ifdef MMC_SUPPORTS_TUNING
+ if (!err && mmc->selected_mode == MMC_HS_400 && !slot->hs400_tuned) {
+ debug("%s: Tuning HS400 mode\n", __func__);
+ err = octeontx_tune_hs400(mmc);
+ }
+#endif
+
+ return err;
+}
+
+/**
+ * Gets the status of the card detect pin
+ */
+static int octeontx_mmc_get_cd(struct udevice *dev)
+{
+ struct octeontx_mmc_slot *slot = dev_to_mmc_slot(dev);
+ int val = 1;
+
+ if (dm_gpio_is_valid(&slot->cd_gpio)) {
+ val = dm_gpio_get_value(&slot->cd_gpio);
+ val ^= slot->cd_inverted;
+ }
+ debug("%s(%s): cd: %d\n", __func__, dev->name, val);
+ return val;
+}
+
+/**
+ * Gets the status of the write protect pin
+ */
+static int octeontx_mmc_get_wp(struct udevice *dev)
+{
+ struct octeontx_mmc_slot *slot = dev_to_mmc_slot(dev);
+ int val = 0;
+
+ if (dm_gpio_is_valid(&slot->wp_gpio)) {
+ val = dm_gpio_get_value(&slot->wp_gpio);
+ val ^= slot->wp_inverted;
+ }
+ debug("%s(%s): wp: %d\n", __func__, dev->name, val);
+ return val;
+}
+
+static void octeontx_mmc_set_timing(struct mmc *mmc)
+{
+ union mio_emm_timing timing;
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+
+ switch (mmc->selected_mode) {
+ case MMC_HS_200:
+ timing = slot->hs200_taps;
+ break;
+ case MMC_HS_400:
+ timing = slot->hs400_tuned ?
+ slot->hs400_taps : slot->hs200_taps;
+ break;
+ default:
+ timing = slot->taps;
+ break;
+ }
+
+ debug("%s(%s):\n cmd_in_tap: %u\n cmd_out_tap: %u\n data_in_tap: %u\n data_out_tap: %u\n",
+ __func__, mmc->dev->name, timing.s.cmd_in_tap,
+ timing.s.cmd_out_tap, timing.s.data_in_tap,
+ timing.s.data_out_tap);
+
+ octeontx_mmc_set_emm_timing(mmc, timing);
+}
+
+static int octeontx_mmc_configure_delay(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct octeontx_mmc_host *host __maybe_unused = slot->host;
+ bool __maybe_unused is_hs200;
+ bool __maybe_unused is_hs400;
+
+ debug("%s(%s)\n", __func__, mmc->dev->name);
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ union mio_emm_sample emm_sample;
+
+ emm_sample.u = 0;
+ emm_sample.s.cmd_cnt = slot->cmd_cnt;
+ emm_sample.s.dat_cnt = slot->dat_cnt;
+ write_csr(mmc, MIO_EMM_SAMPLE(), emm_sample.u);
+ } else {
+ is_hs200 = (mmc->selected_mode == MMC_HS_200);
+ is_hs400 = (mmc->selected_mode == MMC_HS_400);
+
+ if ((is_hs200 && slot->hs200_tuned) ||
+ (is_hs400 && slot->hs400_tuned) ||
+ (!is_hs200 && !is_hs400 && slot->tuned)) {
+ octeontx_mmc_set_output_bus_timing(mmc);
+ } else {
+ int half = MAX_NO_OF_TAPS / 2;
+ int dout, cout;
+
+ switch (mmc->selected_mode) {
+ case MMC_LEGACY:
+ if (IS_SD(mmc)) {
+ cout = MMC_SD_LEGACY_DEFAULT_CMD_OUT_TAP;
+ dout = MMC_SD_LEGACY_DEFAULT_DATA_OUT_TAP;
+ } else {
+ cout = MMC_LEGACY_DEFAULT_CMD_OUT_TAP;
+ dout = MMC_LEGACY_DEFAULT_DATA_OUT_TAP;
+ }
+ break;
+ case MMC_HS:
+ cout = MMC_HS_CMD_OUT_TAP;
+ dout = MMC_HS_DATA_OUT_TAP;
+ break;
+ case SD_HS:
+ case UHS_SDR12:
+ case UHS_SDR25:
+ case UHS_SDR50:
+ cout = MMC_SD_HS_CMD_OUT_TAP;
+ dout = MMC_SD_HS_DATA_OUT_TAP;
+ break;
+ case UHS_SDR104:
+ case UHS_DDR50:
+ case MMC_HS_52:
+ case MMC_DDR_52:
+ cout = MMC_DEFAULT_CMD_OUT_TAP;
+ dout = MMC_DEFAULT_DATA_OUT_TAP;
+ break;
+ case MMC_HS_200:
+ cout = -1;
+ dout = -1;
+ if (host->timing_calibrated) {
+ cout = octeontx2_mmc_calc_delay(
+ mmc, slot->cmd_out_hs200_delay);
+ dout = octeontx2_mmc_calc_delay(
+ mmc,
+ slot->data_out_hs200_delay);
+ debug("%s(%s): Calibrated HS200/HS400 cmd out delay: %dps tap: %d, data out delay: %d, tap: %d\n",
+ __func__, mmc->dev->name,
+ slot->cmd_out_hs200_delay, cout,
+ slot->data_out_hs200_delay, dout);
+ } else {
+ cout = MMC_DEFAULT_HS200_CMD_OUT_TAP;
+ dout = MMC_DEFAULT_HS200_DATA_OUT_TAP;
+ }
+ is_hs200 = true;
+ break;
+ case MMC_HS_400:
+ cout = -1;
+ dout = -1;
+ if (host->timing_calibrated) {
+ if (slot->cmd_out_hs400_delay)
+ cout = octeontx2_mmc_calc_delay(
+ mmc,
+ slot->cmd_out_hs400_delay);
+ if (slot->data_out_hs400_delay)
+ dout = octeontx2_mmc_calc_delay(
+ mmc,
+ slot->data_out_hs400_delay);
+ debug("%s(%s): Calibrated HS200/HS400 cmd out delay: %dps tap: %d, data out delay: %d, tap: %d\n",
+ __func__, mmc->dev->name,
+ slot->cmd_out_hs400_delay, cout,
+ slot->data_out_hs400_delay, dout);
+ } else {
+ cout = MMC_DEFAULT_HS400_CMD_OUT_TAP;
+ dout = MMC_DEFAULT_HS400_DATA_OUT_TAP;
+ }
+ is_hs400 = true;
+ break;
+ default:
+ pr_err("%s(%s): Invalid mode %d\n", __func__,
+ mmc->dev->name, mmc->selected_mode);
+ return -1;
+ }
+ debug("%s(%s): Not tuned, hs200: %d, hs200 tuned: %d, hs400: %d, hs400 tuned: %d, tuned: %d\n",
+ __func__, mmc->dev->name, is_hs200,
+ slot->hs200_tuned,
+ is_hs400, slot->hs400_tuned, slot->tuned);
+ /* Set some defaults */
+ if (is_hs200) {
+ slot->hs200_taps.u = 0;
+ slot->hs200_taps.s.cmd_out_tap = cout;
+ slot->hs200_taps.s.data_out_tap = dout;
+ slot->hs200_taps.s.cmd_in_tap = half;
+ slot->hs200_taps.s.data_in_tap = half;
+ } else if (is_hs400) {
+ slot->hs400_taps.u = 0;
+ slot->hs400_taps.s.cmd_out_tap = cout;
+ slot->hs400_taps.s.data_out_tap = dout;
+ slot->hs400_taps.s.cmd_in_tap = half;
+ slot->hs400_taps.s.data_in_tap = half;
+ } else {
+ slot->taps.u = 0;
+ slot->taps.s.cmd_out_tap = cout;
+ slot->taps.s.data_out_tap = dout;
+ slot->taps.s.cmd_in_tap = half;
+ slot->taps.s.data_in_tap = half;
+ }
+ }
+
+ if (is_hs200)
+ debug("%s(%s): hs200 taps: ci: %u, co: %u, di: %u, do: %u\n",
+ __func__, mmc->dev->name,
+ slot->hs200_taps.s.cmd_in_tap,
+ slot->hs200_taps.s.cmd_out_tap,
+ slot->hs200_taps.s.data_in_tap,
+ slot->hs200_taps.s.data_out_tap);
+ else if (is_hs400)
+ debug("%s(%s): hs400 taps: ci: %u, co: %u, di: %u, do: %u\n",
+ __func__, mmc->dev->name,
+ slot->hs400_taps.s.cmd_in_tap,
+ slot->hs400_taps.s.cmd_out_tap,
+ slot->hs400_taps.s.data_in_tap,
+ slot->hs400_taps.s.data_out_tap);
+ else
+ debug("%s(%s): taps: ci: %u, co: %u, di: %u, do: %u\n",
+ __func__, mmc->dev->name, slot->taps.s.cmd_in_tap,
+ slot->taps.s.cmd_out_tap,
+ slot->taps.s.data_in_tap,
+ slot->taps.s.data_out_tap);
+ octeontx_mmc_set_timing(mmc);
+ debug("%s: Done\n", __func__);
+ }
+
+ return 0;
+}
+
+/**
+ * Sets the MMC watchdog timer in microseconds
+ *
+ * @param mmc mmc device
+ * @param us timeout in microseconds, 0 for maximum timeout
+ */
+static void set_wdog(struct mmc *mmc, u64 us)
+{
+ union mio_emm_wdog wdog;
+ u64 val;
+
+ val = (us * mmc->clock) / 1000000;
+ if (val >= (1 << 26) || !us) {
+ if (us)
+ pr_debug("%s: warning: timeout %llu exceeds max value %llu, truncating\n",
+ __func__, us,
+ (u64)(((1ULL << 26) - 1) * 1000000ULL) /
+ mmc->clock);
+ val = (1 << 26) - 1;
+ }
+ wdog.u = 0;
+ wdog.s.clk_cnt = val;
+ write_csr(mmc, MIO_EMM_WDOG(), wdog.u);
+}
+
+/**
+ * Set the IO drive strength and slew
+ *
+ * @param mmc mmc device
+ */
+static void octeontx_mmc_io_drive_setup(struct mmc *mmc)
+{
+ if (!IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ union mio_emm_io_ctl io_ctl;
+
+ if (slot->drive < 0 || slot->slew < 0)
+ return;
+
+ io_ctl.u = 0;
+ io_ctl.s.drive = slot->drive;
+ io_ctl.s.slew = slot->slew;
+ write_csr(mmc, MIO_EMM_IO_CTL(), io_ctl.u);
+ }
+}
+
+/**
+ * Print switch errors
+ *
+ * @param mmc mmc device
+ */
+static void check_switch_errors(struct mmc *mmc)
+{
+ union mio_emm_switch emm_switch;
+
+ emm_switch.u = read_csr(mmc, MIO_EMM_SWITCH());
+ if (emm_switch.s.switch_err0)
+ pr_err("%s: Switch power class error\n", mmc->cfg->name);
+ if (emm_switch.s.switch_err1)
+ pr_err("%s: Switch HS timing error\n", mmc->cfg->name);
+ if (emm_switch.s.switch_err2)
+ pr_err("%s: Switch bus width error\n", mmc->cfg->name);
+}
+
+static void do_switch(struct mmc *mmc, union mio_emm_switch emm_switch)
+{
+ union mio_emm_rsp_sts rsp_sts;
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ int bus_id = emm_switch.s.bus_id;
+ ulong start;
+
+ if (emm_switch.s.bus_id != 0) {
+ emm_switch.s.bus_id = 0;
+ write_csr(mmc, MIO_EMM_SWITCH(), emm_switch.u);
+ udelay(100);
+ emm_switch.s.bus_id = bus_id;
+ }
+ debug("%s(%s, 0x%llx)\n", __func__, mmc->dev->name, emm_switch.u);
+ write_csr(mmc, MIO_EMM_SWITCH(), emm_switch.u);
+
+ start = get_timer(0);
+ do {
+ rsp_sts.u = read_csr(mmc, MIO_EMM_RSP_STS());
+ if (!rsp_sts.s.switch_val)
+ break;
+ udelay(100);
+ } while (get_timer(start) < 10);
+ if (rsp_sts.s.switch_val) {
+ pr_warn("%s(%s): Warning: writing 0x%llx to emm_switch timed out, status: 0x%llx\n",
+ __func__, mmc->dev->name, emm_switch.u, rsp_sts.u);
+ }
+ slot->cached_switch = emm_switch;
+ check_switch_errors(mmc);
+ slot->cached_switch.u = emm_switch.u;
+ debug("%s: emm_switch: 0x%llx, rsp_lo: 0x%llx\n",
+ __func__, read_csr(mmc, MIO_EMM_SWITCH()),
+ read_csr(mmc, MIO_EMM_RSP_LO()));
+}
+
+/**
+ * Given a delay in ps, return the tap delay count
+ *
+ * @param mmc mmc data structure
+ * @param delay delay in picoseconds
+ *
+ * @return Number of tap cycles or error if -1
+ */
+static int octeontx2_mmc_calc_delay(struct mmc *mmc, int delay)
+{
+ struct octeontx_mmc_host *host = mmc_to_host(mmc);
+
+ if (host->is_asim || host->is_emul)
+ return 63;
+
+ if (!host->timing_taps) {
+ pr_err("%s(%s): Error: host timing not calibrated\n",
+ __func__, mmc->dev->name);
+ return -1;
+ }
+ debug("%s(%s, %d) timing taps: %llu\n", __func__, mmc->dev->name,
+ delay, host->timing_taps);
+ return min_t(int, DIV_ROUND_UP(delay, host->timing_taps), 63);
+}
+
+/**
+ * Calibrates the delay based on the internal clock
+ *
+ * @param mmc Pointer to mmc data structure
+ *
+ * @return 0 for success or -ETIMEDOUT on error
+ *
+ * NOTE: On error a default value will be calculated.
+ */
+static int octeontx_mmc_calibrate_delay(struct mmc *mmc)
+{
+ union mio_emm_calb emm_calb;
+ union mio_emm_tap emm_tap;
+ union mio_emm_cfg emm_cfg;
+ union mio_emm_io_ctl emm_io_ctl;
+ union mio_emm_switch emm_switch;
+ union mio_emm_wdog emm_wdog;
+ union mio_emm_sts_mask emm_sts_mask;
+ union mio_emm_debug emm_debug;
+ union mio_emm_timing emm_timing;
+ struct octeontx_mmc_host *host = mmc_to_host(mmc);
+ ulong start;
+ u8 bus_id, bus_ena;
+
+ debug("%s: Calibrating delay\n", __func__);
+ if (host->is_asim || host->is_emul) {
+ debug(" No calibration for ASIM\n");
+ return 0;
+ }
+ emm_tap.u = 0;
+ if (host->calibrate_glitch) {
+ emm_tap.s.delay = MMC_DEFAULT_TAP_DELAY;
+ } else {
+ /* Save registers */
+ emm_cfg.u = read_csr(mmc, MIO_EMM_CFG());
+ emm_io_ctl.u = read_csr(mmc, MIO_EMM_IO_CTL());
+ emm_switch.u = read_csr(mmc, MIO_EMM_SWITCH());
+ emm_wdog.u = read_csr(mmc, MIO_EMM_WDOG());
+ emm_sts_mask.u = read_csr(mmc, MIO_EMM_STS_MASK());
+ emm_debug.u = read_csr(mmc, MIO_EMM_DEBUG());
+ emm_timing.u = read_csr(mmc, MIO_EMM_TIMING());
+ bus_ena = emm_cfg.s.bus_ena;
+ bus_id = emm_switch.s.bus_id;
+ emm_cfg.s.bus_ena = 0;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+ udelay(1);
+ emm_cfg.s.bus_ena = 1ULL << 3;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+ mdelay(1);
+ emm_calb.u = 0;
+ write_csr(mmc, MIO_EMM_CALB(), emm_calb.u);
+ emm_calb.s.start = 1;
+ write_csr(mmc, MIO_EMM_CALB(), emm_calb.u);
+ start = get_timer(0);
+ /* This should only take 3 microseconds */
+ do {
+ udelay(5);
+ emm_tap.u = read_csr(mmc, MIO_EMM_TAP());
+ } while (!emm_tap.s.delay && get_timer(start) < 10);
+
+ emm_calb.s.start = 0;
+ write_csr(mmc, MIO_EMM_CALB(), emm_calb.u);
+
+ emm_cfg.s.bus_ena = 0;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+ udelay(1);
+ /* Restore registers */
+ emm_cfg.s.bus_ena = bus_ena;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+ if (host->tap_requires_noclk) {
+ /* Turn off the clock */
+ emm_debug.u = read_csr(mmc, MIO_EMM_DEBUG());
+ emm_debug.s.emmc_clk_disable = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ emm_debug.s.rdsync_rst = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ }
+
+ write_csr(mmc, MIO_EMM_TIMING(), emm_timing.u);
+ if (host->tap_requires_noclk) {
+ /* Turn the clock back on */
+ udelay(1);
+ emm_debug.s.rdsync_rst = 0;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ udelay(1);
+ emm_debug.s.emmc_clk_disable = 0;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ }
+ udelay(1);
+ write_csr(mmc, MIO_EMM_IO_CTL(), emm_io_ctl.u);
+ bus_id = emm_switch.s.bus_id;
+ emm_switch.s.bus_id = 0;
+ write_csr(mmc, MIO_EMM_SWITCH(), emm_switch.u);
+ emm_switch.s.bus_id = bus_id;
+ write_csr(mmc, MIO_EMM_SWITCH(), emm_switch.u);
+ write_csr(mmc, MIO_EMM_WDOG(), emm_wdog.u);
+ write_csr(mmc, MIO_EMM_STS_MASK(), emm_sts_mask.u);
+ write_csr(mmc, MIO_EMM_RCA(), mmc->rca);
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+
+ if (!emm_tap.s.delay) {
+ pr_err("%s: Error: delay calibration failed, timed out.\n",
+ __func__);
+ /* Set to default value if timed out */
+ emm_tap.s.delay = MMC_DEFAULT_TAP_DELAY;
+ return -ETIMEDOUT;
+ }
+ }
+ /* Round up */
+ host->timing_taps = (10 * 1000 * emm_tap.s.delay) / TOTAL_NO_OF_TAPS;
+ debug("%s(%s): timing taps: %llu, delay: %u\n",
+ __func__, mmc->dev->name, host->timing_taps, emm_tap.s.delay);
+ host->timing_calibrated = true;
+ return 0;
+}
+
+static int octeontx_mmc_set_input_bus_timing(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX)) {
+ union mio_emm_sample sample;
+
+ sample.u = 0;
+ sample.s.cmd_cnt = slot->cmd_clk_skew;
+ sample.s.dat_cnt = slot->dat_clk_skew;
+ write_csr(mmc, MIO_EMM_SAMPLE(), sample.u);
+ } else {
+ union mio_emm_timing timing;
+
+ timing.u = read_csr(mmc, MIO_EMM_TIMING());
+ if (mmc->selected_mode == MMC_HS_200) {
+ if (slot->hs200_tuned) {
+ timing.s.cmd_in_tap =
+ slot->hs200_taps.s.cmd_in_tap;
+ timing.s.data_in_tap =
+ slot->hs200_taps.s.data_in_tap;
+ } else {
+ pr_warn("%s(%s): Warning: hs200 timing not tuned\n",
+ __func__, mmc->dev->name);
+ timing.s.cmd_in_tap =
+ MMC_DEFAULT_HS200_CMD_IN_TAP;
+ timing.s.data_in_tap =
+ MMC_DEFAULT_HS200_DATA_IN_TAP;
+ }
+ } else if (mmc->selected_mode == MMC_HS_400) {
+ if (slot->hs400_tuned) {
+ timing.s.cmd_in_tap =
+ slot->hs400_taps.s.cmd_in_tap;
+ timing.s.data_in_tap =
+ slot->hs400_taps.s.data_in_tap;
+ } else if (slot->hs200_tuned) {
+ timing.s.cmd_in_tap =
+ slot->hs200_taps.s.cmd_in_tap;
+ timing.s.data_in_tap =
+ slot->hs200_taps.s.data_in_tap;
+ } else {
+ pr_warn("%s(%s): Warning: hs400 timing not tuned\n",
+ __func__, mmc->dev->name);
+ timing.s.cmd_in_tap =
+ MMC_DEFAULT_HS200_CMD_IN_TAP;
+ timing.s.data_in_tap =
+ MMC_DEFAULT_HS200_DATA_IN_TAP;
+ }
+ } else if (slot->tuned) {
+ timing.s.cmd_in_tap = slot->taps.s.cmd_in_tap;
+ timing.s.data_in_tap = slot->taps.s.data_in_tap;
+ } else {
+ timing.s.cmd_in_tap = MMC_DEFAULT_CMD_IN_TAP;
+ timing.s.data_in_tap = MMC_DEFAULT_DATA_IN_TAP;
+ }
+ octeontx_mmc_set_emm_timing(mmc, timing);
+ }
+
+ return 0;
+}
+
+/**
+ * Sets the default bus timing for the current mode.
+ *
+ * @param mmc mmc data structure
+ *
+ * @return 0 for success, error otherwise
+ */
+static int octeontx_mmc_set_output_bus_timing(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ union mio_emm_timing timing;
+ int cout_bdelay, dout_bdelay;
+ unsigned int cout_delay, dout_delay;
+ char env_name[32];
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX))
+ return 0;
+
+ debug("%s(%s)\n", __func__, mmc->dev->name);
+ if (slot->is_asim || slot->is_emul)
+ return 0;
+
+ octeontx_mmc_calibrate_delay(mmc);
+
+ if (mmc->clock < 26000000) {
+ cout_delay = 5000;
+ dout_delay = 5000;
+ } else if (mmc->clock <= 52000000) {
+ cout_delay = 2500;
+ dout_delay = 2500;
+ } else if (!mmc_is_mode_ddr(mmc->selected_mode)) {
+ cout_delay = slot->cmd_out_hs200_delay;
+ dout_delay = slot->data_out_hs200_delay;
+ } else {
+ cout_delay = slot->cmd_out_hs400_delay;
+ dout_delay = slot->data_out_hs400_delay;
+ }
+
+ snprintf(env_name, sizeof(env_name), "mmc%d_hs200_dout_delay_ps",
+ slot->bus_id);
+ dout_delay = env_get_ulong(env_name, 10, dout_delay);
+ debug("%s: dout_delay: %u\n", __func__, dout_delay);
+
+ cout_bdelay = octeontx2_mmc_calc_delay(mmc, cout_delay);
+ dout_bdelay = octeontx2_mmc_calc_delay(mmc, dout_delay);
+
+ debug("%s: cmd output delay: %u, data output delay: %u, cmd bdelay: %d, data bdelay: %d, clock: %d\n",
+ __func__, cout_delay, dout_delay, cout_bdelay, dout_bdelay,
+ mmc->clock);
+ if (cout_bdelay < 0 || dout_bdelay < 0) {
+ pr_err("%s: Error: could not calculate command and/or data clock skew\n",
+ __func__);
+ return -1;
+ }
+ timing.u = read_csr(mmc, MIO_EMM_TIMING());
+ timing.s.cmd_out_tap = cout_bdelay;
+ timing.s.data_out_tap = dout_bdelay;
+ if (mmc->selected_mode == MMC_HS_200) {
+ slot->hs200_taps.s.cmd_out_tap = cout_bdelay;
+ slot->hs200_taps.s.data_out_tap = dout_bdelay;
+ } else if (mmc->selected_mode == MMC_HS_400) {
+ slot->hs400_taps.s.cmd_out_tap = cout_bdelay;
+ slot->hs400_taps.s.data_out_tap = dout_bdelay;
+ } else {
+ slot->taps.s.cmd_out_tap = cout_bdelay;
+ slot->taps.s.data_out_tap = dout_bdelay;
+ }
+ octeontx_mmc_set_emm_timing(mmc, timing);
+ debug("%s(%s): bdelay: %d/%d, clock: %d, ddr: %s, timing taps: %llu, do: %d, di: %d, co: %d, ci: %d\n",
+ __func__, mmc->dev->name, cout_bdelay, dout_bdelay, mmc->clock,
+ mmc->ddr_mode ? "yes" : "no",
+ mmc_to_host(mmc)->timing_taps,
+ timing.s.data_out_tap,
+ timing.s.data_in_tap,
+ timing.s.cmd_out_tap,
+ timing.s.cmd_in_tap);
+
+ return 0;
+}
+
+static void octeontx_mmc_set_clock(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ uint clock;
+
+ clock = min(mmc->cfg->f_max, (uint)slot->clock);
+ clock = max(mmc->cfg->f_min, clock);
+ debug("%s(%s): f_min: %u, f_max: %u, clock: %u\n", __func__,
+ mmc->dev->name, mmc->cfg->f_min, mmc->cfg->f_max, clock);
+ slot->clock = clock;
+ mmc->clock = clock;
+}
+
+/**
+ * This switches I/O power as needed when switching between slots.
+ *
+ * @param mmc mmc data structure
+ */
+static void octeontx_mmc_switch_io(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct octeontx_mmc_host *host = slot->host;
+ struct mmc *last_mmc = host->last_mmc;
+ static struct udevice *last_reg;
+ union mio_emm_cfg emm_cfg;
+ int bus;
+ static bool initialized;
+
+ /* First time? */
+ if (!initialized || mmc != host->last_mmc) {
+ struct mmc *ommc;
+
+ /* Switch to bus 3 which is unused */
+ emm_cfg.u = read_csr(mmc, MIO_EMM_CFG());
+ emm_cfg.s.bus_ena = 1 << 3;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+
+ /* Turn off all other I/O interfaces with first initialization
+ * if at least one supply was found.
+ */
+ for (bus = 0; bus <= OCTEONTX_MAX_MMC_SLOT; bus++) {
+ ommc = &host->slots[bus].mmc;
+
+ /* Handle self case later */
+ if (ommc == mmc || !ommc->vqmmc_supply)
+ continue;
+
+ /* Skip if we're not switching regulators */
+ if (last_reg == mmc->vqmmc_supply)
+ continue;
+
+ /* Turn off other regulators */
+ if (ommc->vqmmc_supply != mmc->vqmmc_supply)
+ regulator_set_enable(ommc->vqmmc_supply, false);
+ }
+ /* Turn ourself on */
+ if (mmc->vqmmc_supply && last_reg != mmc->vqmmc_supply)
+ regulator_set_enable(mmc->vqmmc_supply, true);
+ mdelay(1); /* Settle time */
+ /* Switch to new bus */
+ emm_cfg.s.bus_ena = 1 << slot->bus_id;
+ write_csr(mmc, MIO_EMM_CFG(), emm_cfg.u);
+ last_reg = mmc->vqmmc_supply;
+ initialized = true;
+ return;
+ }
+
+ /* No change in device */
+ if (last_mmc == mmc)
+ return;
+
+ if (!last_mmc) {
+ pr_warn("%s(%s): No previous slot detected in IO slot switch!\n",
+ __func__, mmc->dev->name);
+ return;
+ }
+
+ debug("%s(%s): last: %s, supply: %p\n", __func__, mmc->dev->name,
+ last_mmc->dev->name, mmc->vqmmc_supply);
+
+ /* The supply is the same so we do nothing */
+ if (last_mmc->vqmmc_supply == mmc->vqmmc_supply)
+ return;
+
+ /* Turn off the old slot I/O supply */
+ if (last_mmc->vqmmc_supply) {
+ debug("%s(%s): Turning off IO to %s, supply: %s\n",
+ __func__, mmc->dev->name, last_mmc->dev->name,
+ last_mmc->vqmmc_supply->name);
+ regulator_set_enable(last_mmc->vqmmc_supply, false);
+ }
+ /* Turn on the new slot I/O supply */
+ if (mmc->vqmmc_supply) {
+ debug("%s(%s): Turning on IO to slot %d, supply: %s\n",
+ __func__, mmc->dev->name, slot->bus_id,
+ mmc->vqmmc_supply->name);
+ regulator_set_enable(mmc->vqmmc_supply, true);
+ }
+ /* Allow power to settle */
+ mdelay(1);
+}
+
+/**
+ * Called to switch between mmc devices
+ *
+ * @param mmc new mmc device
+ */
+static void octeontx_mmc_switch_to(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct octeontx_mmc_slot *old_slot;
+ struct octeontx_mmc_host *host = slot->host;
+ union mio_emm_switch emm_switch;
+ union mio_emm_sts_mask emm_sts_mask;
+ union mio_emm_rca emm_rca;
+
+ if (slot->bus_id == host->last_slotid)
+ return;
+
+ debug("%s(%s) switching from slot %d to slot %d\n", __func__,
+ mmc->dev->name, host->last_slotid, slot->bus_id);
+ octeontx_mmc_switch_io(mmc);
+
+ if (host->last_slotid >= 0 && slot->valid) {
+ old_slot = &host->slots[host->last_slotid];
+ old_slot->cached_switch.u = read_csr(mmc, MIO_EMM_SWITCH());
+ old_slot->cached_rca.u = read_csr(mmc, MIO_EMM_RCA());
+ }
+ if (mmc->rca)
+ write_csr(mmc, MIO_EMM_RCA(), mmc->rca);
+ emm_switch = slot->cached_switch;
+ do_switch(mmc, emm_switch);
+ emm_rca.u = 0;
+ emm_rca.s.card_rca = mmc->rca;
+ write_csr(mmc, MIO_EMM_RCA(), emm_rca.u);
+ mdelay(100);
+
+ set_wdog(mmc, 100000);
+ if (octeontx_mmc_set_output_bus_timing(mmc) ||
+ octeontx_mmc_set_input_bus_timing(mmc))
+ pr_err("%s(%s): Error setting bus timing\n", __func__,
+ mmc->dev->name);
+ octeontx_mmc_io_drive_setup(mmc);
+
+ emm_sts_mask.u = 0;
+ emm_sts_mask.s.sts_msk = 1 << 7 | 1 << 22 | 1 << 23 | 1 << 19;
+ write_csr(mmc, MIO_EMM_STS_MASK(), emm_sts_mask.u);
+ host->last_slotid = slot->bus_id;
+ host->last_mmc = mmc;
+ mdelay(10);
+}
+
+/**
+ * Perform initial timing configuration
+ *
+ * @param mmc mmc device
+ *
+ * @return 0 for success
+ *
+ * NOTE: This will need to be updated when new silicon comes out
+ */
+static int octeontx_mmc_init_timing(struct mmc *mmc)
+{
+ union mio_emm_timing timing;
+
+ if (mmc_to_slot(mmc)->is_asim || mmc_to_slot(mmc)->is_emul)
+ return 0;
+
+ debug("%s(%s)\n", __func__, mmc->dev->name);
+ timing.u = 0;
+ timing.s.cmd_out_tap = MMC_DEFAULT_CMD_OUT_TAP;
+ timing.s.data_out_tap = MMC_DEFAULT_DATA_OUT_TAP;
+ timing.s.cmd_in_tap = MMC_DEFAULT_CMD_IN_TAP;
+ timing.s.data_in_tap = MMC_DEFAULT_DATA_IN_TAP;
+ octeontx_mmc_set_emm_timing(mmc, timing);
+ return 0;
+}
+
+/**
+ * Perform low-level initialization
+ *
+ * @param mmc mmc device
+ *
+ * @return 0 for success, error otherwise
+ */
+static int octeontx_mmc_init_lowlevel(struct mmc *mmc)
+{
+ struct octeontx_mmc_slot *slot = mmc_to_slot(mmc);
+ struct octeontx_mmc_host *host = slot->host;
+ union mio_emm_switch emm_switch;
+ u32 clk_period;
+
+ debug("%s(%s): lowlevel init for slot %d\n", __func__,
+ mmc->dev->name, slot->bus_id);
+ host->emm_cfg.s.bus_ena &= ~(1 << slot->bus_id);
+ write_csr(mmc, MIO_EMM_CFG(), host->emm_cfg.u);
+ udelay(100);
+ host->emm_cfg.s.bus_ena |= 1 << slot->bus_id;
+ write_csr(mmc, MIO_EMM_CFG(), host->emm_cfg.u);
+ udelay(10);
+ slot->clock = mmc->cfg->f_min;
+ octeontx_mmc_set_clock(&slot->mmc);
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX2)) {
+ if (host->cond_clock_glitch) {
+ union mio_emm_debug emm_debug;
+
+ emm_debug.u = read_csr(mmc, MIO_EMM_DEBUG());
+ emm_debug.s.clk_on = 1;
+ write_csr(mmc, MIO_EMM_DEBUG(), emm_debug.u);
+ }
+ octeontx_mmc_calibrate_delay(&slot->mmc);
+ }
+
+ clk_period = octeontx_mmc_calc_clk_period(mmc);
+ emm_switch.u = 0;
+ emm_switch.s.power_class = 10;
+ emm_switch.s.clk_lo = clk_period / 2;
+ emm_switch.s.clk_hi = clk_period / 2;
+
+ emm_switch.s.bus_id = slot->bus_id;
+ debug("%s: Performing switch\n", __func__);
+ do_switch(mmc, emm_switch);
+ slot->cached_switch.u = emm_switch.u;
+
+ if (!IS_ENABLED(CONFIG_ARCH_OCTEONTX))
+ octeontx_mmc_init_timing(mmc);
+
+ set_wdog(mmc, 1000000); /* Set to 1 second */
+ write_csr(mmc, MIO_EMM_STS_MASK(), 0xe4390080ull);
+ write_csr(mmc, MIO_EMM_RCA(), 1);
+ mdelay(10);
+ debug("%s: done\n", __func__);
+ return 0;
+}
+
+/**
+ * Translates a voltage number to bits in MMC register
+ *
+ * @param voltage voltage in microvolts
+ *
+ * @return MMC register value for voltage
+ */
+static u32 xlate_voltage(u32 voltage)
+{
+ u32 volt = 0;
+
+ /* Convert to millivolts */
+ voltage /= 1000;
+ if (voltage >= 1650 && voltage <= 1950)
+ volt |= MMC_VDD_165_195;
+ if (voltage >= 2000 && voltage <= 2100)
+ volt |= MMC_VDD_20_21;
+ if (voltage >= 2100 && voltage <= 2200)
+ volt |= MMC_VDD_21_22;
+ if (voltage >= 2200 && voltage <= 2300)
+ volt |= MMC_VDD_22_23;
+ if (voltage >= 2300 && voltage <= 2400)
+ volt |= MMC_VDD_23_24;
+ if (voltage >= 2400 && voltage <= 2500)
+ volt |= MMC_VDD_24_25;
+ if (voltage >= 2500 && voltage <= 2600)
+ volt |= MMC_VDD_25_26;
+ if (voltage >= 2600 && voltage <= 2700)
+ volt |= MMC_VDD_26_27;
+ if (voltage >= 2700 && voltage <= 2800)
+ volt |= MMC_VDD_27_28;
+ if (voltage >= 2800 && voltage <= 2900)
+ volt |= MMC_VDD_28_29;
+ if (voltage >= 2900 && voltage <= 3000)
+ volt |= MMC_VDD_29_30;
+ if (voltage >= 3000 && voltage <= 3100)
+ volt |= MMC_VDD_30_31;
+ if (voltage >= 3100 && voltage <= 3200)
+ volt |= MMC_VDD_31_32;
+ if (voltage >= 3200 && voltage <= 3300)
+ volt |= MMC_VDD_32_33;
+ if (voltage >= 3300 && voltage <= 3400)
+ volt |= MMC_VDD_33_34;
+ if (voltage >= 3400 && voltage <= 3500)
+ volt |= MMC_VDD_34_35;
+ if (voltage >= 3500 && voltage <= 3600)
+ volt |= MMC_VDD_35_36;
+
+ return volt;
+}
+
+/**
+ * Check if a slot is valid in the device tree
+ *
+ * @param dev slot device to check
+ *
+ * @return true if status reports "ok" or "okay" or if no status,
+ * false otherwise.
+ */
+static bool octeontx_mmc_get_valid(struct udevice *dev)
+{
+ const char *stat = ofnode_read_string(dev->node, "status");
+
+ if (!stat || !strncmp(stat, "ok", 2))
+ return true;
+ else
+ return false;
+}
+
+/**
+ * Reads slot configuration from the device tree
+ *
+ * @param dev slot device
+ *
+ * @return 0 on success, otherwise error
+ */
+static int octeontx_mmc_get_config(struct udevice *dev)
+{
+ struct octeontx_mmc_slot *slot = dev_to_mmc_slot(dev);
+ uint voltages[2];
+ uint low, high;
+ char env_name[32];
+ int err;
+ ofnode node = dev->node;
+ int bus_width = 1;
+ ulong new_max_freq;
+
+ debug("%s(%s)", __func__, dev->name);
+ slot->cfg.name = dev->name;
+
+ slot->cfg.f_max = ofnode_read_s32_default(dev->node, "max-frequency",
+ 26000000);
+ snprintf(env_name, sizeof(env_name), "mmc_max_frequency%d",
+ slot->bus_id);
+
+ new_max_freq = env_get_ulong(env_name, 10, slot->cfg.f_max);
+ debug("Reading %s, got %lu\n", env_name, new_max_freq);
+
+ if (new_max_freq != slot->cfg.f_max) {
+ printf("Overriding device tree MMC maximum frequency %u to %lu\n",
+ slot->cfg.f_max, new_max_freq);
+ slot->cfg.f_max = new_max_freq;
+ }
+ slot->cfg.f_min = 400000;
+ slot->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX2)) {
+ slot->hs400_tuning_block =
+ ofnode_read_s32_default(dev->node,
+ "marvell,hs400-tuning-block",
+ -1);
+ debug("%s(%s): mmc HS400 tuning block: %d\n", __func__,
+ dev->name, slot->hs400_tuning_block);
+
+ slot->hs200_tap_adj =
+ ofnode_read_s32_default(dev->node,
+ "marvell,hs200-tap-adjust", 0);
+ debug("%s(%s): hs200-tap-adjust: %d\n", __func__, dev->name,
+ slot->hs200_tap_adj);
+ slot->hs400_tap_adj =
+ ofnode_read_s32_default(dev->node,
+ "marvell,hs400-tap-adjust", 0);
+ debug("%s(%s): hs400-tap-adjust: %d\n", __func__, dev->name,
+ slot->hs400_tap_adj);
+ }
+
+ err = ofnode_read_u32_array(dev->node, "voltage-ranges", voltages, 2);
+ if (err) {
+ slot->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ } else {
+ low = xlate_voltage(voltages[0]);
+ high = xlate_voltage(voltages[1]);
+ debug(" low voltage: 0x%x (%u), high: 0x%x (%u)\n",
+ low, voltages[0], high, voltages[1]);
+ if (low > high || !low || !high) {
+ pr_err("Invalid MMC voltage range [%u-%u] specified for %s\n",
+ low, high, dev->name);
+ return -1;
+ }
+ slot->cfg.voltages = 0;
+ do {
+ slot->cfg.voltages |= low;
+ low <<= 1;
+ } while (low <= high);
+ }
+ debug("%s: config voltages: 0x%x\n", __func__, slot->cfg.voltages);
+ slot->slew = ofnode_read_s32_default(node, "cavium,clk-slew", -1);
+ slot->drive = ofnode_read_s32_default(node, "cavium,drv-strength", -1);
+ gpio_request_by_name(dev, "cd-gpios", 0, &slot->cd_gpio, GPIOD_IS_IN);
+ slot->cd_inverted = ofnode_read_bool(node, "cd-inverted");
+ gpio_request_by_name(dev, "wp-gpios", 0, &slot->wp_gpio, GPIOD_IS_IN);
+ slot->wp_inverted = ofnode_read_bool(node, "wp-inverted");
+ if (slot->cfg.voltages & MMC_VDD_165_195) {
+ slot->is_1_8v = true;
+ slot->is_3_3v = false;
+ } else if (slot->cfg.voltages & (MMC_VDD_30_31 | MMC_VDD_31_32 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 |
+ MMC_VDD_35_36)) {
+ slot->is_1_8v = false;
+ slot->is_3_3v = true;
+ }
+
+ bus_width = ofnode_read_u32_default(node, "bus-width", 1);
+ /* Note fall-through */
+ switch (bus_width) {
+ case 8:
+ slot->cfg.host_caps |= MMC_MODE_8BIT;
+ case 4:
+ slot->cfg.host_caps |= MMC_MODE_4BIT;
+ case 1:
+ slot->cfg.host_caps |= MMC_MODE_1BIT;
+ break;
+ }
+ if (ofnode_read_bool(node, "no-1-8-v")) {
+ slot->is_3_3v = true;
+ slot->is_1_8v = false;
+ if (!(slot->cfg.voltages & (MMC_VDD_32_33 | MMC_VDD_33_34)))
+ pr_warn("%s(%s): voltages indicate 3.3v but 3.3v not supported\n",
+ __func__, dev->name);
+ }
+ if (ofnode_read_bool(node, "mmc-ddr-3-3v")) {
+ slot->is_3_3v = true;
+ slot->is_1_8v = false;
+ if (!(slot->cfg.voltages & (MMC_VDD_32_33 | MMC_VDD_33_34)))
+ pr_warn("%s(%s): voltages indicate 3.3v but 3.3v not supported\n",
+ __func__, dev->name);
+ }
+ if (ofnode_read_bool(node, "cap-sd-highspeed") ||
+ ofnode_read_bool(node, "cap-mmc-highspeed") ||
+ ofnode_read_bool(node, "sd-uhs-sdr25"))
+ slot->cfg.host_caps |= MMC_MODE_HS;
+ if (slot->cfg.f_max >= 50000000 &&
+ slot->cfg.host_caps & MMC_MODE_HS)
+ slot->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ if (ofnode_read_bool(node, "sd-uhs-sdr50"))
+ slot->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ if (ofnode_read_bool(node, "sd-uhs-ddr50"))
+ slot->cfg.host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz |
+ MMC_MODE_DDR_52MHz;
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX2)) {
+ if (!slot->is_asim && !slot->is_emul) {
+ if (ofnode_read_bool(node, "mmc-hs200-1_8v"))
+ slot->cfg.host_caps |= MMC_MODE_HS200 |
+ MMC_MODE_HS_52MHz;
+ if (ofnode_read_bool(node, "mmc-hs400-1_8v"))
+ slot->cfg.host_caps |= MMC_MODE_HS400 |
+ MMC_MODE_HS_52MHz |
+ MMC_MODE_HS200 |
+ MMC_MODE_DDR_52MHz;
+ slot->cmd_out_hs200_delay =
+ ofnode_read_u32_default(node,
+ "marvell,cmd-out-hs200-dly",
+ MMC_DEFAULT_HS200_CMD_OUT_DLY);
+ debug("%s(%s): HS200 cmd out delay: %d\n",
+ __func__, dev->name, slot->cmd_out_hs200_delay);
+ slot->data_out_hs200_delay =
+ ofnode_read_u32_default(node,
+ "marvell,data-out-hs200-dly",
+ MMC_DEFAULT_HS200_DATA_OUT_DLY);
+ debug("%s(%s): HS200 data out delay: %d\n",
+ __func__, dev->name, slot->data_out_hs200_delay);
+ slot->cmd_out_hs400_delay =
+ ofnode_read_u32_default(node,
+ "marvell,cmd-out-hs400-dly",
+ MMC_DEFAULT_HS400_CMD_OUT_DLY);
+ debug("%s(%s): HS400 cmd out delay: %d\n",
+ __func__, dev->name, slot->cmd_out_hs400_delay);
+ slot->data_out_hs400_delay =
+ ofnode_read_u32_default(node,
+ "marvell,data-out-hs400-dly",
+ MMC_DEFAULT_HS400_DATA_OUT_DLY);
+ debug("%s(%s): HS400 data out delay: %d\n",
+ __func__, dev->name, slot->data_out_hs400_delay);
+ }
+ }
+
+ slot->disable_ddr = ofnode_read_bool(node, "marvell,disable-ddr");
+ slot->non_removable = ofnode_read_bool(node, "non-removable");
+ slot->cmd_clk_skew = ofnode_read_u32_default(node,
+ "cavium,cmd-clk-skew", 0);
+ slot->dat_clk_skew = ofnode_read_u32_default(node,
+ "cavium,dat-clk-skew", 0);
+ debug("%s(%s): host caps: 0x%x\n", __func__,
+ dev->name, slot->cfg.host_caps);
+ return 0;
+}
+
+/**
+ * Probes a MMC slot
+ *
+ * @param dev mmc device
+ *
+ * @return 0 for success, error otherwise
+ */
+static int octeontx_mmc_slot_probe(struct udevice *dev)
+{
+ struct octeontx_mmc_slot *slot;
+ struct mmc *mmc;
+ int err;
+
+ printk("%s (%d)\n", __func__, __LINE__); // test-only
+ debug("%s(%s)\n", __func__, dev->name);
+ if (!host_probed) {
+ pr_err("%s(%s): Error: host not probed yet\n",
+ __func__, dev->name);
+ }
+ slot = dev_to_mmc_slot(dev);
+ mmc = &slot->mmc;
+ mmc->dev = dev;
+
+ slot->valid = false;
+ if (!octeontx_mmc_get_valid(dev)) {
+ debug("%s(%s): slot is invalid\n", __func__, dev->name);
+ return -ENODEV;
+ }
+
+ debug("%s(%s): Getting config\n", __func__, dev->name);
+ err = octeontx_mmc_get_config(dev);
+ if (err) {
+ pr_err("probe(%s): Error getting config\n", dev->name);
+ return err;
+ }
+
+ debug("%s(%s): mmc bind, mmc: %p\n", __func__, dev->name, &slot->mmc);
+ err = mmc_bind(dev, &slot->mmc, &slot->cfg);
+ if (err) {
+ pr_err("%s(%s): Error binding mmc\n", __func__, dev->name);
+ return -1;
+ }
+
+ /* For some reason, mmc_bind always assigns priv to the device */
+ slot->mmc.priv = slot;
+
+ debug("%s(%s): lowlevel init\n", __func__, dev->name);
+ err = octeontx_mmc_init_lowlevel(mmc);
+ if (err) {
+ pr_err("probe(%s): Low-level init failed\n", dev->name);
+ return err;
+ }
+
+ slot->valid = true;
+
+ debug("%s(%s):\n"
+ " base address : %p\n"
+ " bus id : %d\n", __func__, dev->name,
+ slot->base_addr, slot->bus_id);
+
+ return err;
+}
+
+/**
+ * MMC slot driver operations
+ */
+static const struct dm_mmc_ops octeontx_hsmmc_ops = {
+ .send_cmd = octeontx_mmc_dev_send_cmd,
+ .set_ios = octeontx_mmc_set_ios,
+ .get_cd = octeontx_mmc_get_cd,
+ .get_wp = octeontx_mmc_get_wp,
+#ifdef MMC_SUPPORTS_TUNING
+ .execute_tuning = octeontx_mmc_execute_tuning,
+#endif
+};
+
+static const struct udevice_id octeontx_hsmmc_ids[] = {
+ { .compatible = "mmc-slot" },
+ { }
+};
+
+U_BOOT_DRIVER(octeontx_hsmmc_slot) = {
+ .name = "octeontx_hsmmc_slot",
+ .id = UCLASS_MMC,
+ .of_match = of_match_ptr(octeontx_hsmmc_ids),
+ .probe = octeontx_mmc_slot_probe,
+ .ops = &octeontx_hsmmc_ops,
+};
+
+/*****************************************************************
+ * PCI host driver
+ *
+ * The PCI host driver contains the resources used by all of the
+ * slot drivers.
+ *
+ * The slot drivers are pseudo drivers.
+ */
+
+/**
+ * Probe the MMC host controller
+ *
+ * @param dev mmc host controller device
+ *
+ * @return 0 for success, -1 on error
+ */
+static int octeontx_mmc_host_probe(struct udevice *dev)
+{
+ pci_dev_t bdf = dm_pci_get_bdf(dev);
+ struct octeontx_mmc_host *host = dev_get_priv(dev);
+ union mio_emm_int emm_int;
+ u8 rev;
+
+ debug("%s(%s): Entry host: %p\n", __func__, dev->name, host);
+
+ if (!octeontx_mmc_get_valid(dev)) {
+ debug("%s(%s): mmc host not valid\n", __func__, dev->name);
+ return -ENODEV;
+ }
+ memset(host, 0, sizeof(*host));
+ host->base_addr = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
+ PCI_REGION_MEM);
+ if (!host->base_addr) {
+ pr_err("%s: Error: MMC base address not found\n", __func__);
+ return -1;
+ }
+ host->dev = dev;
+ debug("%s(%s): Base address: %p\n", __func__, dev->name,
+ host->base_addr);
+ if (!dev_has_of_node(dev)) {
+ pr_err("%s: No device tree information found\n", __func__);
+ return -1;
+ }
+ host->node = dev->node;
+ dev->req_seq = PCI_FUNC(bdf);
+ host->last_slotid = -1;
+ if (otx_is_platform(PLATFORM_ASIM))
+ host->is_asim = true;
+ if (otx_is_platform(PLATFORM_EMULATOR))
+ host->is_emul = true;
+ host->dma_wait_delay =
+ ofnode_read_u32_default(dev->node, "marvell,dma-wait-delay", 1);
+ /* Force reset of eMMC */
+ writeq(0, host->base_addr + MIO_EMM_CFG());
+ debug("%s: Clearing MIO_EMM_CFG\n", __func__);
+ udelay(100);
+ emm_int.u = readq(host->base_addr + MIO_EMM_INT());
+ debug("%s: Writing 0x%llx to MIO_EMM_INT\n", __func__, emm_int.u);
+ writeq(emm_int.u, host->base_addr + MIO_EMM_INT());
+
+ debug("%s(%s): Getting I/O clock\n", __func__, dev->name);
+ host->sys_freq = octeontx_get_io_clock();
+ debug("%s(%s): I/O clock %llu\n", __func__, dev->name, host->sys_freq);
+
+ if (IS_ENABLED(CONFIG_ARCH_OCTEONTX2)) {
+ /* Flags for issues to work around */
+ dm_pci_read_config8(dev, PCI_REVISION_ID, &rev);
+ if (otx_is_soc(CN96XX)) {
+ debug("%s: CN96XX revision %d\n", __func__, rev);
+ switch (rev) {
+ case 0:
+ host->calibrate_glitch = true;
+ host->cond_clock_glitch = true;
+ break;
+ case 1:
+ break;
+ case 2:
+ break;
+ case 0x10: /* C0 */
+ host->hs400_skew_needed = true;
+ debug("HS400 skew support enabled\n");
+ fallthrough;
+ default:
+ debug("CN96XX rev C0+ detected\n");
+ host->tap_requires_noclk = true;
+ break;
+ }
+ } else if (otx_is_soc(CN95XX)) {
+ if (!rev)
+ host->cond_clock_glitch = true;
+ }
+ }
+
+ host_probed = true;
+
+ return 0;
+}
+
+/**
+ * This performs some initial setup before a probe occurs.
+ *
+ * @param dev: MMC slot device
+ *
+ * @return 0 for success, -1 on failure
+ *
+ * Do some pre-initialization before probing a slot.
+ */
+static int octeontx_mmc_host_child_pre_probe(struct udevice *dev)
+{
+ struct octeontx_mmc_host *host = dev_get_priv(dev_get_parent(dev));
+ struct octeontx_mmc_slot *slot;
+ struct mmc_uclass_priv *upriv;
+ ofnode node = dev->node;
+ u32 bus_id;
+ char name[16];
+ int err;
+
+ debug("%s(%s) Pre-Probe\n", __func__, dev->name);
+ if (ofnode_read_u32(node, "reg", &bus_id)) {
+ pr_err("%s(%s): Error: \"reg\" not found in device tree\n",
+ __func__, dev->name);
+ return -1;
+ }
+ if (bus_id > OCTEONTX_MAX_MMC_SLOT) {
+ pr_err("%s(%s): Error: \"reg\" out of range of 0..%d\n",
+ __func__, dev->name, OCTEONTX_MAX_MMC_SLOT);
+ return -1;
+ }
+
+ slot = &host->slots[bus_id];
+ dev->priv = slot;
+ slot->host = host;
+ slot->bus_id = bus_id;
+ slot->dev = dev;
+ slot->base_addr = host->base_addr;
+ slot->is_asim = host->is_asim;
+ slot->is_emul = host->is_emul;
+
+ snprintf(name, sizeof(name), "octeontx-mmc%d", bus_id);
+ err = device_set_name(dev, name);
+
+ if (!dev->uclass_priv) {
+ debug("%s(%s): Allocating uclass priv\n", __func__,
+ dev->name);
+ upriv = calloc(1, sizeof(struct mmc_uclass_priv));
+ if (!upriv)
+ return -ENOMEM;
+ dev->uclass_priv = upriv;
+ dev->uclass->priv = upriv;
+ } else {
+ upriv = dev->uclass_priv;
+ }
+
+ upriv->mmc = &slot->mmc;
+ debug("%s: uclass priv: %p, mmc: %p\n", dev->name, upriv, upriv->mmc);
+
+ debug("%s: ret: %d\n", __func__, err);
+ return err;
+}
+
+static const struct udevice_id octeontx_hsmmc_host_ids[] = {
+ { .compatible = "cavium,thunder-8890-mmc" },
+ { }
+};
+
+U_BOOT_DRIVER(octeontx_hsmmc_host) = {
+ .name = "octeontx_hsmmc_host",
+ .id = UCLASS_MISC,
+ .of_match = of_match_ptr(octeontx_hsmmc_host_ids),
+ .probe = octeontx_mmc_host_probe,
+ .priv_auto_alloc_size = sizeof(struct octeontx_mmc_host),
+ .child_pre_probe = octeontx_mmc_host_child_pre_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+static struct pci_device_id octeontx_mmc_supported[] = {
+ { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_EMMC) },
+ { },
+};
+
+U_BOOT_PCI_DEVICE(octeontx_hsmmc_host, octeontx_mmc_supported);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __OCTEONTX_HSMMC_H__
+#define __OCTEONTX_HSMMC_H__
+#include <asm/gpio.h>
+
+/** Name of our driver */
+#define OCTEONTX_MMC_DRIVER_NAME "octeontx-hsmmc"
+
+/** Maximum supported MMC slots */
+#define OCTEONTX_MAX_MMC_SLOT 3
+
+#define POWER_ON_TIME 40 /** See SD 4.1 spec figure 6-5 */
+
+/**
+ * Timeout used when waiting for commands to complete. We need to keep this
+ * above the hardware watchdog timeout which is usually limited to 1000ms
+ */
+#define WATCHDOG_COUNT (1100) /* in msecs */
+
+/**
+ * Long timeout for commands which might take a while to complete.
+ */
+#define MMC_TIMEOUT_LONG 1000
+
+/**
+ * Short timeout used for most commands in msecs
+ */
+#define MMC_TIMEOUT_SHORT 20
+
+#define NSEC_PER_SEC 1000000000L
+
+#define MAX_NO_OF_TAPS 64
+
+#define EXT_CSD_POWER_CLASS 187 /* R/W */
+
+/* default HS400 tuning block number */
+#define DEFAULT_HS400_TUNING_BLOCK 1
+
+struct octeontx_mmc_host;
+
+/** MMC/SD slot data structure */
+struct octeontx_mmc_slot {
+ struct mmc mmc;
+ struct mmc_config cfg;
+ struct octeontx_mmc_host *host;
+ struct udevice *dev;
+ void *base_addr; /** Same as host base_addr */
+ u64 clock;
+ int bus_id; /** slot number */
+ uint bus_width;
+ uint max_width;
+ int hs200_tap_adj;
+ int hs400_tap_adj;
+ int hs400_tuning_block;
+ struct gpio_desc cd_gpio;
+ struct gpio_desc wp_gpio;
+ struct gpio_desc power_gpio;
+ enum bus_mode mode;
+ union mio_emm_switch cached_switch;
+ union mio_emm_switch want_switch;
+ union mio_emm_rca cached_rca;
+ union mio_emm_timing taps; /* otx2: MIO_EMM_TIMING */
+ union mio_emm_timing hs200_taps;
+ union mio_emm_timing hs400_taps;
+ /* These are used to see if our tuning is still valid or not */
+ enum bus_mode last_mode;
+ u32 last_clock;
+ u32 block_len;
+ u32 block_count;
+ int cmd_clk_skew;
+ int dat_clk_skew;
+ uint cmd_cnt; /* otx: sample cmd in delay */
+ uint dat_cnt; /* otx: sample data in delay */
+ uint drive; /* Current drive */
+ uint slew; /* clock skew */
+ uint cmd_out_hs200_delay;
+ uint data_out_hs200_delay;
+ uint cmd_out_hs400_delay;
+ uint data_out_hs400_delay;
+ uint clk_period;
+ bool valid:1;
+ bool is_acmd:1;
+ bool tuned:1;
+ bool hs200_tuned:1;
+ bool hs400_tuned:1;
+ bool is_1_8v:1;
+ bool is_3_3v:1;
+ bool is_ddr:1;
+ bool is_asim:1;
+ bool is_emul:1;
+ bool cd_inverted:1;
+ bool wp_inverted:1;
+ bool disable_ddr:1;
+ bool non_removable:1;
+};
+
+struct octeontx_mmc_cr_mods {
+ u8 ctype_xor;
+ u8 rtype_xor;
+};
+
+struct octeontx_mmc_cr {
+ u8 c;
+ u8 r;
+};
+
+struct octeontx_sd_mods {
+ struct octeontx_mmc_cr mmc;
+ struct octeontx_mmc_cr sd;
+ struct octeontx_mmc_cr sdacmd;
+};
+
+/** Host controller data structure */
+struct octeontx_mmc_host {
+ struct udevice *dev;
+ void *base_addr;
+ struct octeontx_mmc_slot slots[OCTEONTX_MAX_MMC_SLOT + 1];
+ pci_dev_t pdev;
+ u64 sys_freq;
+ union mio_emm_cfg emm_cfg;
+ u64 timing_taps;
+ struct mmc *last_mmc; /** Last mmc used */
+ ofnode node;
+ int cur_slotid;
+ int last_slotid;
+ int max_width;
+ uint per_tap_delay;
+ uint num_slots;
+ uint dma_wait_delay; /* Delay before polling DMA in usecs */
+ bool initialized:1;
+ bool timing_calibrated:1;
+ bool is_asim:1;
+ bool is_emul:1;
+ bool calibrate_glitch:1;
+ bool cond_clock_glitch:1;
+ bool tap_requires_noclk:1;
+ bool hs400_skew_needed:1;
+};
+
+/*
+ * NOTE: This was copied from the Linux kernel.
+ *
+ * MMC status in R1, for native mode (SPI bits are different)
+ * Type
+ * e:error bit
+ * s:status bit
+ * r:detected and set for the actual command response
+ * x:detected and set during command execution. the host must poll
+ * the card by sending status command in order to read these bits.
+ * Clear condition
+ * a:according to the card state
+ * b:always related to the previous command. Reception of
+ * a valid command will clear it (with a delay of one command)
+ * c:clear by read
+ */
+#define R1_OUT_OF_RANGE BIT(31) /* er, c */
+#define R1_ADDRESS_ERROR BIT(30) /* erx, c */
+#define R1_BLOCK_LEN_ERROR BIT(29) /* er, c */
+#define R1_ERASE_SEQ_ERROR BIT(28) /* er, c */
+#define R1_ERASE_PARAM BIT(27) /* ex, c */
+#define R1_WP_VIOLATION BIT(26) /* erx, c */
+#define R1_CARD_IS_LOCKED BIT(25) /* sx, a */
+#define R1_LOCK_UNLOCK_FAILED BIT(24) /* erx, c */
+#define R1_COM_CRC_ERROR BIT(23) /* er, b */
+/*#define R1_ILLEGAL_COMMAND BIT(22)*/ /* er, b */
+#define R1_CARD_ECC_FAILED BIT(21) /* ex, c */
+#define R1_CC_ERROR BIT(20) /* erx, c */
+#define R1_ERROR BIT(19) /* erx, c */
+#define R1_UNDERRUN BIT(18) /* ex, c */
+#define R1_OVERRUN BIT(17) /* ex, c */
+#define R1_CID_CSD_OVERWRITE BIT(16) /* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP BIT(15) /* sx, c */
+#define R1_CARD_ECC_DISABLED BIT(14) /* sx, a */
+#define R1_ERASE_RESET BIT(13) /* sr, c */
+#define R1_STATUS(x) ((x) & 0xFFFFE000)
+#define R1_CURRENT_STATE(x) (((x) & 0x00001E00) >> 9) /* sx, b (4 bits) */
+#define R1_READY_FOR_DATA BIT(8) /* sx, a */
+#define R1_SWITCH_ERROR BIT(7) /* sx, c */
+
+#define R1_BLOCK_READ_MASK R1_OUT_OF_RANGE | \
+ R1_ADDRESS_ERROR | \
+ R1_BLOCK_LEN_ERROR | \
+ R1_CARD_IS_LOCKED | \
+ R1_COM_CRC_ERROR | \
+ R1_ILLEGAL_COMMAND | \
+ R1_CARD_ECC_FAILED | \
+ R1_CC_ERROR | \
+ R1_ERROR
+#define R1_BLOCK_WRITE_MASK R1_OUT_OF_RANGE | \
+ R1_ADDRESS_ERROR | \
+ R1_BLOCK_LEN_ERROR | \
+ R1_WP_VIOLATION | \
+ R1_CARD_IS_LOCKED | \
+ R1_COM_CRC_ERROR | \
+ R1_ILLEGAL_COMMAND | \
+ R1_CARD_ECC_FAILED | \
+ R1_CC_ERROR | \
+ R1_ERROR | \
+ R1_UNDERRUN | \
+ R1_OVERRUN
+
+#endif /* __OCTEONTX_HSMMC_H__ */
"sdhci-caps-mask", 0);
dt_caps = dev_read_u64_default(host->mmc->dev,
"sdhci-caps", 0);
- caps = ~(u32)dt_caps_mask &
+ caps = ~lower_32_bits(dt_caps_mask) &
sdhci_readl(host, SDHCI_CAPABILITIES);
- caps |= (u32)dt_caps;
+ caps |= lower_32_bits(dt_caps);
#else
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
#endif
/* Check whether the clock multiplier is supported or not */
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
#if CONFIG_IS_ENABLED(DM_MMC)
- caps_1 = ~(u32)(dt_caps_mask >> 32) &
+ caps_1 = ~upper_32_bits(dt_caps_mask) &
sdhci_readl(host, SDHCI_CAPABILITIES_1);
- caps_1 |= (u32)(dt_caps >> 32);
+ caps_1 |= upper_32_bits(dt_caps);
#else
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
#endif
if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
cfg->voltages |= host->voltages;
- cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+ if (caps & SDHCI_CAN_DO_HISPD)
+ cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
+
+ cfg->host_caps |= MMC_MODE_4BIT;
/* Since Host Controller Version3.0 */
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
u32 fifo_depth;
int ret;
- host->ioaddr = devfdt_get_addr_ptr(dev);
+ host->ioaddr = dev_read_addr_ptr(dev);
/*
* If fifo-depth is unset don't set fifoth_val - we will try to
return PTR_ERR(priv->host->ioaddr);
priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
- priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
+ priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0);
return 0;
}
This driver supports DEC DC2114x Fast ethernet chips.
config XILINX_AXIEMAC
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx AXI Ethernet"
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config XILINX_EMACLITE
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
+ depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config ZYNQ_GEM
- depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
+ depends on DM_ETH
select PHYLIB
bool "Xilinx Ethernet GEM"
help
help
Enable PCI memory and I/O space resource allocation and assignment.
+config PCI_REGION_MULTI_ENTRY
+ bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
+ depends on PCI || DM_PCI
+ default n
+ help
+ Enable PCI memory regions to be of multiple entry. Multiple entry
+ here refers to allow more than one count of address ranges for MEMORY
+ region type. This helps to add support for SoC's like OcteonTX/TX2
+ where every peripheral is on the PCI bus.
+
+config PCI_SRIOV
+ bool "Enable Single Root I/O Virtualization support for PCI"
+ depends on PCI || DM_PCI
+ default n
+ help
+ Say Y here if you want to enable PCI Single Root I/O Virtualization
+ capability support. This helps to enumerate Virtual Function devices
+ if available on a PCI Physical Function device and probe for
+ applicable drivers.
+
+config PCI_ARID
+ bool "Enable Alternate Routing-ID support for PCI"
+ depends on PCI || DM_PCI
+ default n
+ help
+ Say Y here if you want to enable Alternate Routing-ID capability
+ support on PCI devices. This helps to skip some devices in BDF
+ scan that are not present.
+
config PCIE_ECAM_GENERIC
bool "Generic ECAM-based PCI host controller support"
default n
with a total of 5 lanes. Some boards require this for Ethernet
support to work (e.g. beaver, jetson-tk1).
+config PCI_OCTEONTX
+ bool "OcteonTX PCI support"
+ depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ help
+ Enable support for the OcteonTX/TX2 SoC family ECAM/PEM controllers.
+ These controllers provide PCI configuration access to all on-board
+ peripherals so it should only be disabled for testing purposes
+
config PCI_XILINX
bool "Xilinx AXI Bridge for PCI Express"
depends on DM_PCI
obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o
obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o
+obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o
int ret;
debug("%s: device %s\n", __func__, dev->name);
- if (dev_read_bool(dev, "pci,no-autoconfig"))
+ if (dev_of_valid(dev) &&
+ dev_read_bool(dev, "pci,no-autoconfig"))
continue;
ret = dm_pciauto_config_device(dev);
if (ret < 0)
{
int sub_bus;
int ret;
+ int ea_pos;
+ u8 reg;
debug("%s\n", __func__);
- sub_bus = pci_get_bus_max() + 1;
+ ea_pos = dm_pci_find_capability(bus, PCI_CAP_ID_EA);
+ if (ea_pos) {
+ dm_pci_read_config8(bus, ea_pos + sizeof(u32) + sizeof(u8),
+ ®);
+ sub_bus = reg;
+ } else {
+ sub_bus = pci_get_bus_max() + 1;
+ }
debug("%s: bus = %d/%s\n", __func__, sub_bus, bus->name);
dm_pciauto_prescan_setup_bridge(bus, sub_bus);
ret);
return ret;
}
- if (sub_bus != bus->seq) {
- printf("%s: Internal error, bus '%s' got seq %d, expected %d\n",
- __func__, bus->name, bus->seq, sub_bus);
- return -EPIPE;
+
+ if (!ea_pos) {
+ if (sub_bus != bus->seq) {
+ debug("%s: Internal error, bus '%s' got seq %d, expected %d\n",
+ __func__, bus->name, bus->seq, sub_bus);
+ return -EPIPE;
+ }
+ sub_bus = pci_get_bus_max();
}
- sub_bus = pci_get_bus_max();
dm_pciauto_postscan_setup_bridge(bus, sub_bus);
return sub_bus;
find_id->vendor, find_id->device);
/* Determine optional OF node */
- pci_dev_find_ofnode(parent, bdf, &node);
+ if (ofnode_valid(dev_ofnode(parent)))
+ pci_dev_find_ofnode(parent, bdf, &node);
if (ofnode_valid(node) && !ofnode_is_available(node)) {
debug("%s: Ignoring disabled device\n", __func__);
ulong header_type;
pci_dev_t bdf, end;
bool found_multi;
+ int ari_off;
int ret;
found_multi = false;
pplat->vendor = vendor;
pplat->device = device;
pplat->class = class;
+
+ if (IS_ENABLED(CONFIG_PCI_ARID)) {
+ ari_off = dm_pci_find_ext_capability(dev,
+ PCI_EXT_CAP_ID_ARI);
+ if (ari_off) {
+ u16 ari_cap;
+
+ /*
+ * Read Next Function number in ARI Cap
+ * Register
+ */
+ dm_pci_read_config16(dev, ari_off + 4,
+ &ari_cap);
+ /*
+ * Update next scan on this function number,
+ * subtract 1 in BDF to satisfy loop increment.
+ */
+ if (ari_cap & 0xff00) {
+ bdf = PCI_BDF(PCI_BUS(bdf),
+ PCI_DEV(ari_cap),
+ PCI_FUNC(ari_cap));
+ bdf = bdf - 0x100;
+ }
+ }
+ }
}
return 0;
ofnode node)
{
int pci_addr_cells, addr_cells, size_cells;
+ struct bd_info *bd = gd->bd;
int cells_per_record;
const u32 *prop;
+ int max_regions;
int len;
int i;
hose->region_count = 0;
debug("%s: len=%d, cells_per_record=%d\n", __func__, len,
cells_per_record);
- for (i = 0; i < MAX_PCI_REGIONS; i++, len -= cells_per_record) {
+
+ /* Dynamically allocate the regions array */
+ max_regions = len / cells_per_record + CONFIG_NR_DRAM_BANKS;
+ hose->regions = (struct pci_region *)
+ calloc(1, max_regions * sizeof(struct pci_region));
+
+ for (i = 0; i < max_regions; i++, len -= cells_per_record) {
u64 pci_addr, addr, size;
int space_code;
u32 flags;
}
pos = -1;
- for (i = 0; i < hose->region_count; i++) {
- if (hose->regions[i].flags == type)
- pos = i;
+ if (!IS_ENABLED(CONFIG_PCI_REGION_MULTI_ENTRY)) {
+ for (i = 0; i < hose->region_count; i++) {
+ if (hose->regions[i].flags == type)
+ pos = i;
+ }
}
+
if (pos == -1)
pos = hose->region_count++;
debug(" - type=%d, pos=%d\n", type, pos);
}
/* Add a region for our local memory */
-#ifdef CONFIG_NR_DRAM_BANKS
- struct bd_info *bd = gd->bd;
-
if (!bd)
return;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
- if (hose->region_count == MAX_PCI_REGIONS) {
- pr_err("maximum number of regions parsed, aborting\n");
- break;
- }
-
if (bd->bi_dram[i].size) {
pci_set_region(hose->regions + hose->region_count++,
bd->bi_dram[i].start,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
}
}
-#else
- phys_addr_t base = 0, size;
-
- size = gd->ram_size;
-#ifdef CONFIG_SYS_SDRAM_BASE
- base = CONFIG_SYS_SDRAM_BASE;
-#endif
- if (gd->pci_ram_top && gd->pci_ram_top < base + size)
- size = gd->pci_ram_top - base;
- if (size)
- pci_set_region(hose->regions + hose->region_count++, base,
- base, size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-#endif
return;
}
hose->bus = bus;
hose->first_busno = bus->seq;
hose->last_busno = bus->seq;
- hose->skip_auto_config_until_reloc =
- dev_read_bool(bus, "u-boot,skip-auto-config-until-reloc");
+ if (dev_of_valid(bus)) {
+ hose->skip_auto_config_until_reloc =
+ dev_read_bool(bus,
+ "u-boot,skip-auto-config-until-reloc");
+ }
return 0;
}
return bus_addr;
}
+static phys_addr_t dm_pci_map_ea_virt(struct udevice *dev, int ea_off,
+ struct pci_child_platdata *pdata)
+{
+ phys_addr_t addr = 0;
+
+ /*
+ * In the case of a Virtual Function device using BAR
+ * base and size, add offset for VFn BAR(1, 2, 3...n)
+ */
+ if (pdata->is_virtfn) {
+ size_t sz;
+ u32 ea_entry;
+
+ /* MaxOffset, 1st DW */
+ dm_pci_read_config32(dev, ea_off + 8, &ea_entry);
+ sz = ea_entry & PCI_EA_FIELD_MASK;
+ /* Fill up lower 2 bits */
+ sz |= (~PCI_EA_FIELD_MASK);
+
+ if (ea_entry & PCI_EA_IS_64) {
+ /* MaxOffset 2nd DW */
+ dm_pci_read_config32(dev, ea_off + 16, &ea_entry);
+ sz |= ((u64)ea_entry) << 32;
+ }
+
+ addr = (pdata->virtid - 1) * (sz + 1);
+ }
+
+ return addr;
+}
+
static void *dm_pci_map_ea_bar(struct udevice *dev, int bar, int flags,
- int ea_off)
+ int ea_off, struct pci_child_platdata *pdata)
{
int ea_cnt, i, entry_size;
int bar_id = (bar - PCI_BASE_ADDRESS_0) >> 2;
u32 ea_entry;
phys_addr_t addr;
+ if (IS_ENABLED(CONFIG_PCI_SRIOV)) {
+ /*
+ * In the case of a Virtual Function device, device is
+ * Physical function, so pdata will point to required VF
+ * specific data.
+ */
+ if (pdata->is_virtfn)
+ bar_id += PCI_EA_BEI_VF_BAR0;
+ }
+
/* EA capability structure header */
dm_pci_read_config32(dev, ea_off, &ea_entry);
ea_cnt = (ea_entry >> 16) & PCI_EA_NUM_ENT_MASK;
addr |= ((u64)ea_entry) << 32;
}
+ if (IS_ENABLED(CONFIG_PCI_SRIOV))
+ addr += dm_pci_map_ea_virt(dev, ea_off, pdata);
+
/* size ignored for now */
- return map_physmem(addr, flags, 0);
+ return map_physmem(addr, 0, flags);
}
return 0;
void *dm_pci_map_bar(struct udevice *dev, int bar, int flags)
{
+ struct pci_child_platdata *pdata = dev_get_parent_platdata(dev);
+ struct udevice *udev = dev;
pci_addr_t pci_bus_addr;
u32 bar_response;
int ea_off;
+ if (IS_ENABLED(CONFIG_PCI_SRIOV)) {
+ /*
+ * In case of Virtual Function devices, use PF udevice
+ * as EA capability is defined in Physical Function
+ */
+ if (pdata->is_virtfn)
+ udev = pdata->pfdev;
+ }
+
/*
* if the function supports Enhanced Allocation use that instead of
* BARs
+ * Incase of virtual functions, pdata will help read VF BEI
+ * and EA entry size.
*/
- ea_off = dm_pci_find_capability(dev, PCI_CAP_ID_EA);
+ ea_off = dm_pci_find_capability(udev, PCI_CAP_ID_EA);
if (ea_off)
- return dm_pci_map_ea_bar(dev, bar, flags, ea_off);
+ return dm_pci_map_ea_bar(udev, bar, flags, ea_off, pdata);
/* read BAR address */
- dm_pci_read_config32(dev, bar, &bar_response);
+ dm_pci_read_config32(udev, bar, &bar_response);
pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
/*
* Pass "0" as the length argument to pci_bus_to_virt. The arg
- * isn't actualy used on any platform because u-boot assumes a static
+ * isn't actually used on any platform because U-Boot assumes a static
* linear mapping. In the future, this could read the BAR size
* and pass that as the size if needed.
*/
- return dm_pci_bus_to_virt(dev, pci_bus_addr, flags, 0, MAP_NOCACHE);
+ return dm_pci_bus_to_virt(udev, pci_bus_addr, flags, 0, MAP_NOCACHE);
}
static int _dm_pci_find_next_capability(struct udevice *dev, u8 pos, int cap)
return 0;
}
+#if defined(CONFIG_PCI_SRIOV)
+int pci_sriov_init(struct udevice *pdev, int vf_en)
+{
+ u16 vendor, device;
+ struct udevice *bus;
+ struct udevice *dev;
+ pci_dev_t bdf;
+ u16 ctrl;
+ u16 num_vfs;
+ u16 total_vf;
+ u16 vf_offset;
+ u16 vf_stride;
+ int vf, ret;
+ int pos;
+
+ pos = dm_pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+ if (!pos) {
+ debug("Error: SRIOV capability not found\n");
+ return -ENOENT;
+ }
+
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_CTRL, &ctrl);
+
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_TOTAL_VF, &total_vf);
+ if (vf_en > total_vf)
+ vf_en = total_vf;
+ dm_pci_write_config16(pdev, pos + PCI_SRIOV_NUM_VF, vf_en);
+
+ ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
+ dm_pci_write_config16(pdev, pos + PCI_SRIOV_CTRL, ctrl);
+
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_NUM_VF, &num_vfs);
+ if (num_vfs > vf_en)
+ num_vfs = vf_en;
+
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_VF_OFFSET, &vf_offset);
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_VF_STRIDE, &vf_stride);
+
+ dm_pci_read_config16(pdev, PCI_VENDOR_ID, &vendor);
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_VF_DID, &device);
+
+ bdf = dm_pci_get_bdf(pdev);
+
+ pci_get_bus(PCI_BUS(bdf), &bus);
+
+ if (!bus)
+ return -ENODEV;
+
+ bdf += PCI_BDF(0, 0, vf_offset);
+
+ for (vf = 0; vf < num_vfs; vf++) {
+ struct pci_child_platdata *pplat;
+ ulong class;
+
+ pci_bus_read_config(bus, bdf, PCI_CLASS_DEVICE,
+ &class, PCI_SIZE_16);
+
+ debug("%s: bus %d/%s: found VF %x:%x\n", __func__,
+ bus->seq, bus->name, PCI_DEV(bdf), PCI_FUNC(bdf));
+
+ /* Find this device in the device tree */
+ ret = pci_bus_find_devfn(bus, PCI_MASK_BUS(bdf), &dev);
+
+ if (ret == -ENODEV) {
+ struct pci_device_id find_id;
+
+ memset(&find_id, '\0', sizeof(find_id));
+ find_id.vendor = vendor;
+ find_id.device = device;
+ find_id.class = class;
+
+ ret = pci_find_and_bind_driver(bus, &find_id,
+ bdf, &dev);
+
+ if (ret)
+ return ret;
+ }
+
+ /* Update the platform data */
+ pplat = dev_get_parent_platdata(dev);
+ pplat->devfn = PCI_MASK_BUS(bdf);
+ pplat->vendor = vendor;
+ pplat->device = device;
+ pplat->class = class;
+ pplat->is_virtfn = true;
+ pplat->pfdev = pdev;
+ pplat->virtid = vf * vf_stride + vf_offset;
+
+ debug("%s: bus %d/%s: found VF %x:%x %x:%x class %lx id %x\n",
+ __func__, dev->seq, dev->name, PCI_DEV(bdf),
+ PCI_FUNC(bdf), vendor, device, class, pplat->virtid);
+ bdf += PCI_BDF(0, 0, vf_stride);
+ }
+
+ return 0;
+}
+
+int pci_sriov_get_totalvfs(struct udevice *pdev)
+{
+ u16 total_vf;
+ int pos;
+
+ pos = dm_pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+ if (!pos) {
+ debug("Error: SRIOV capability not found\n");
+ return -ENOENT;
+ }
+
+ dm_pci_read_config16(pdev, pos + PCI_SRIOV_TOTAL_VF, &total_vf);
+
+ return total_vf;
+}
+#endif /* SRIOV */
+
UCLASS_DRIVER(pci) = {
.id = UCLASS_PCI,
.name = "pci",
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <log.h>
+#include <malloc.h>
+#include <pci.h>
+
+#include <asm/io.h>
+
+#include <linux/ioport.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This driver supports multiple types of operations / host bridges / busses:
+ *
+ * OTX_ECAM: Octeon TX & TX2 ECAM (Enhanced Configuration Access Mechanism)
+ * Used to access the internal on-chip devices which are connected
+ * to internal buses
+ * OTX_PEM: Octeon TX PEM (PCI Express MAC)
+ * Used to access the external (off-chip) PCI devices
+ * OTX2_PEM: Octeon TX2 PEM (PCI Express MAC)
+ * Used to access the external (off-chip) PCI devices
+ */
+enum {
+ OTX_ECAM,
+ OTX_PEM,
+ OTX2_PEM,
+};
+
+/**
+ * struct octeontx_pci - Driver private data
+ * @type: Device type matched via compatible (e.g. OTX_ECAM etc)
+ * @cfg: Config resource
+ * @bus: Bus resource
+ */
+struct octeontx_pci {
+ unsigned int type;
+
+ struct resource cfg;
+ struct resource bus;
+};
+
+static uintptr_t octeontx_cfg_addr(struct octeontx_pci *pcie,
+ int bus_offs, int shift_offs,
+ pci_dev_t bdf, uint offset)
+{
+ u32 bus, dev, func;
+ uintptr_t address;
+
+ bus = PCI_BUS(bdf) + bus_offs;
+ dev = PCI_DEV(bdf);
+ func = PCI_FUNC(bdf);
+
+ address = (bus << (20 + shift_offs)) |
+ (dev << (15 + shift_offs)) |
+ (func << (12 + shift_offs)) | offset;
+ address += pcie->cfg.start;
+
+ return address;
+}
+
+static ulong readl_size(uintptr_t addr, enum pci_size_t size)
+{
+ ulong val;
+
+ switch (size) {
+ case PCI_SIZE_8:
+ val = readb(addr);
+ break;
+ case PCI_SIZE_16:
+ val = readw(addr);
+ break;
+ case PCI_SIZE_32:
+ val = readl(addr);
+ break;
+ default:
+ printf("Invalid size\n");
+ return -EINVAL;
+ };
+
+ return val;
+}
+
+static void writel_size(uintptr_t addr, enum pci_size_t size, ulong valuep)
+{
+ switch (size) {
+ case PCI_SIZE_8:
+ writeb(valuep, addr);
+ break;
+ case PCI_SIZE_16:
+ writew(valuep, addr);
+ break;
+ case PCI_SIZE_32:
+ writel(valuep, addr);
+ break;
+ default:
+ printf("Invalid size\n");
+ };
+}
+
+static bool octeontx_bdf_invalid(pci_dev_t bdf)
+{
+ if (PCI_BUS(bdf) == 1 && PCI_DEV(bdf) > 0)
+ return true;
+
+ return false;
+}
+
+static int octeontx_ecam_read_config(const struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ uintptr_t address;
+
+ address = octeontx_cfg_addr(pcie, pcie->bus.start - hose->first_busno,
+ 0, bdf, offset);
+ *valuep = readl_size(address, size);
+
+ debug("%02x.%02x.%02x: u%d %x -> %lx\n",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), size, offset, *valuep);
+
+ return 0;
+}
+
+static int octeontx_ecam_write_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ uintptr_t address;
+
+ address = octeontx_cfg_addr(pcie, pcie->bus.start - hose->first_busno,
+ 0, bdf, offset);
+ writel_size(address, size, value);
+
+ debug("%02x.%02x.%02x: u%d %x <- %lx\n",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), size, offset, value);
+
+ return 0;
+}
+
+static int octeontx_pem_read_config(const struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ uintptr_t address;
+ u8 hdrtype;
+ u8 pri_bus = pcie->bus.start + 1 - hose->first_busno;
+ u32 bus_offs = (pri_bus << 16) | (pri_bus << 8) | (pri_bus << 0);
+
+ address = octeontx_cfg_addr(pcie, 1 - hose->first_busno, 4,
+ bdf, 0);
+
+ *valuep = pci_conv_32_to_size(~0UL, offset, size);
+
+ if (octeontx_bdf_invalid(bdf))
+ return -EPERM;
+
+ *valuep = readl_size(address + offset, size);
+
+ hdrtype = readb(address + PCI_HEADER_TYPE);
+ if (hdrtype == PCI_HEADER_TYPE_BRIDGE &&
+ offset >= PCI_PRIMARY_BUS &&
+ offset <= PCI_SUBORDINATE_BUS &&
+ *valuep != pci_conv_32_to_size(~0UL, offset, size))
+ *valuep -= pci_conv_32_to_size(bus_offs, offset, size);
+
+ return 0;
+}
+
+static int octeontx_pem_write_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ uintptr_t address;
+ u8 hdrtype;
+ u8 pri_bus = pcie->bus.start + 1 - hose->first_busno;
+ u32 bus_offs = (pri_bus << 16) | (pri_bus << 8) | (pri_bus << 0);
+
+ address = octeontx_cfg_addr(pcie, 1 - hose->first_busno, 4, bdf, 0);
+
+ hdrtype = readb(address + PCI_HEADER_TYPE);
+ if (hdrtype == PCI_HEADER_TYPE_BRIDGE &&
+ offset >= PCI_PRIMARY_BUS &&
+ offset <= PCI_SUBORDINATE_BUS &&
+ value != pci_conv_32_to_size(~0UL, offset, size))
+ value += pci_conv_32_to_size(bus_offs, offset, size);
+
+ if (octeontx_bdf_invalid(bdf))
+ return -EPERM;
+
+ writel_size(address + offset, size, value);
+
+ debug("%02x.%02x.%02x: u%d %x (%lx) <- %lx\n",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), size, offset,
+ address, value);
+
+ return 0;
+}
+
+static int octeontx2_pem_read_config(const struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ uintptr_t address;
+
+ address = octeontx_cfg_addr(pcie, 1 - hose->first_busno, 0,
+ bdf, 0);
+
+ *valuep = pci_conv_32_to_size(~0UL, offset, size);
+
+ if (octeontx_bdf_invalid(bdf))
+ return -EPERM;
+
+ *valuep = readl_size(address + offset, size);
+
+ debug("%02x.%02x.%02x: u%d %x (%lx) -> %lx\n",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), size, offset,
+ address, *valuep);
+
+ return 0;
+}
+
+static int octeontx2_pem_write_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ uintptr_t address;
+
+ address = octeontx_cfg_addr(pcie, 1 - hose->first_busno, 0,
+ bdf, 0);
+
+ if (octeontx_bdf_invalid(bdf))
+ return -EPERM;
+
+ writel_size(address + offset, size, value);
+
+ debug("%02x.%02x.%02x: u%d %x (%lx) <- %lx\n",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), size, offset,
+ address, value);
+
+ return 0;
+}
+
+int pci_octeontx_read_config(const struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ int ret = -EIO;
+
+ switch (pcie->type) {
+ case OTX_ECAM:
+ ret = octeontx_ecam_read_config(bus, bdf, offset, valuep,
+ size);
+ break;
+ case OTX_PEM:
+ ret = octeontx_pem_read_config(bus, bdf, offset, valuep,
+ size);
+ break;
+ case OTX2_PEM:
+ ret = octeontx2_pem_read_config(bus, bdf, offset, valuep,
+ size);
+ break;
+ }
+
+ return ret;
+}
+
+int pci_octeontx_write_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(bus);
+ int ret = -EIO;
+
+ switch (pcie->type) {
+ case OTX_ECAM:
+ ret = octeontx_ecam_write_config(bus, bdf, offset, value,
+ size);
+ break;
+ case OTX_PEM:
+ ret = octeontx_pem_write_config(bus, bdf, offset, value,
+ size);
+ break;
+ case OTX2_PEM:
+ ret = octeontx2_pem_write_config(bus, bdf, offset, value,
+ size);
+ break;
+ }
+
+ return ret;
+}
+
+static int pci_octeontx_ofdata_to_platdata(struct udevice *dev)
+{
+ return 0;
+}
+
+static int pci_octeontx_probe(struct udevice *dev)
+{
+ struct octeontx_pci *pcie = (struct octeontx_pci *)dev_get_priv(dev);
+ int err;
+
+ pcie->type = dev_get_driver_data(dev);
+
+ err = dev_read_resource(dev, 0, &pcie->cfg);
+ if (err) {
+ debug("Error reading resource: %s\n", fdt_strerror(err));
+ return err;
+ }
+
+ err = dev_read_pci_bus_range(dev, &pcie->bus);
+ if (err) {
+ debug("Error reading resource: %s\n", fdt_strerror(err));
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct dm_pci_ops pci_octeontx_ops = {
+ .read_config = pci_octeontx_read_config,
+ .write_config = pci_octeontx_write_config,
+};
+
+static const struct udevice_id pci_octeontx_ids[] = {
+ { .compatible = "cavium,pci-host-thunder-ecam", .data = OTX_ECAM },
+ { .compatible = "cavium,pci-host-octeontx-ecam", .data = OTX_ECAM },
+ { .compatible = "pci-host-ecam-generic", .data = OTX_ECAM },
+ { .compatible = "cavium,pci-host-thunder-pem", .data = OTX_PEM },
+ { .compatible = "marvell,pci-host-octeontx2-pem", .data = OTX2_PEM },
+ { }
+};
+
+U_BOOT_DRIVER(pci_octeontx) = {
+ .name = "pci_octeontx",
+ .id = UCLASS_PCI,
+ .of_match = pci_octeontx_ids,
+ .ops = &pci_octeontx_ops,
+ .ofdata_to_platdata = pci_octeontx_ofdata_to_platdata,
+ .probe = pci_octeontx_probe,
+ .priv_auto_alloc_size = sizeof(struct octeontx_pci),
+ .flags = DM_FLAG_PRE_RELOC,
+};
#include <linux/bitops.h>
#include <linux/iopoll.h>
#include <linux/list.h>
+#include "pci_internal.h"
/* PCIe shared registers */
#define PCIE_SYS_CFG 0x00
#define PCIE_FC_CREDIT_MASK (GENMASK(31, 31) | GENMASK(28, 16))
#define PCIE_FC_CREDIT_VAL(x) ((x) << 16)
+/* PCIe V2 share registers */
+#define PCIE_SYS_CFG_V2 0x0
+#define PCIE_CSR_LTSSM_EN(x) BIT(0 + (x) * 8)
+#define PCIE_CSR_ASPM_L1_EN(x) BIT(1 + (x) * 8)
+
+/* PCIe V2 per-port registers */
+#define PCIE_CONF_VEND_ID 0x100
+#define PCIE_CONF_DEVICE_ID 0x102
+#define PCIE_CONF_CLASS_ID 0x106
+
+#define PCIE_AHB_TRANS_BASE0_L 0x438
+#define PCIE_AHB_TRANS_BASE0_H 0x43c
+#define AHB2PCIE_SIZE(x) ((x) & GENMASK(4, 0))
+#define PCIE_AXI_WINDOW0 0x448
+#define WIN_ENABLE BIT(7)
+
+/*
+ * Define PCIe to AHB window size as 2^33 to support max 8GB address space
+ * translate, support least 4GB DRAM size access from EP DMA(physical DRAM
+ * start from 0x40000000).
+ */
+#define PCIE2AHB_SIZE 0x21
+
+/* PCIe V2 configuration transaction header */
+#define PCIE_CFG_HEADER0 0x460
+#define PCIE_CFG_HEADER1 0x464
+#define PCIE_CFG_HEADER2 0x468
+#define PCIE_CFG_WDATA 0x470
+#define PCIE_APP_TLP_REQ 0x488
+#define PCIE_CFG_RDATA 0x48c
+#define APP_CFG_REQ BIT(0)
+#define APP_CPL_STATUS GENMASK(7, 5)
+
+#define CFG_WRRD_TYPE_0 4
+#define CFG_WR_FMT 2
+#define CFG_RD_FMT 0
+
+#define CFG_DW0_LENGTH(length) ((length) & GENMASK(9, 0))
+#define CFG_DW0_TYPE(type) (((type) << 24) & GENMASK(28, 24))
+#define CFG_DW0_FMT(fmt) (((fmt) << 29) & GENMASK(31, 29))
+#define CFG_DW2_REGN(regn) ((regn) & GENMASK(11, 2))
+#define CFG_DW2_FUN(fun) (((fun) << 16) & GENMASK(18, 16))
+#define CFG_DW2_DEV(dev) (((dev) << 19) & GENMASK(23, 19))
+#define CFG_DW2_BUS(bus) (((bus) << 24) & GENMASK(31, 24))
+#define CFG_HEADER_DW0(type, fmt) \
+ (CFG_DW0_LENGTH(1) | CFG_DW0_TYPE(type) | CFG_DW0_FMT(fmt))
+#define CFG_HEADER_DW1(where, size) \
+ (GENMASK(((size) - 1), 0) << ((where) & 0x3))
+#define CFG_HEADER_DW2(regn, fun, dev, bus) \
+ (CFG_DW2_REGN(regn) | CFG_DW2_FUN(fun) | \
+ CFG_DW2_DEV(dev) | CFG_DW2_BUS(bus))
+
+#define PCIE_RST_CTRL 0x510
+#define PCIE_PHY_RSTB BIT(0)
+#define PCIE_PIPE_SRSTB BIT(1)
+#define PCIE_MAC_SRSTB BIT(2)
+#define PCIE_CRSTB BIT(3)
+#define PCIE_PERSTB BIT(8)
+#define PCIE_LINKDOWN_RST_EN GENMASK(15, 13)
+#define PCIE_LINK_STATUS_V2 0x804
+#define PCIE_PORT_LINKUP_V2 BIT(11)
+
+#define PCI_VENDOR_ID_MEDIATEK 0x14c3
+
+enum MTK_PCIE_GEN {PCIE_V1, PCIE_V2, PCIE_V3};
+
struct mtk_pcie_port {
void __iomem *base;
struct list_head list;
struct mtk_pcie *pcie;
struct reset_ctl reset;
struct clk sys_ck;
+ struct clk ahb_ck;
+ struct clk axi_ck;
+ struct clk aux_ck;
+ struct clk obff_ck;
+ struct clk pipe_ck;
struct phy phy;
u32 slot;
};
struct mtk_pcie {
void __iomem *base;
+ void *priv;
struct clk free_ck;
struct list_head ports;
};
.write_config = mtk_pcie_write_config,
};
+static int mtk_pcie_check_cfg_cpld(struct mtk_pcie_port *port)
+{
+ u32 val;
+ int err;
+
+ err = readl_poll_timeout(port->base + PCIE_APP_TLP_REQ, val,
+ !(val & APP_CFG_REQ), 100 * 1000);
+ if (err)
+ return -1;
+
+ if (readl(port->base + PCIE_APP_TLP_REQ) & APP_CPL_STATUS)
+ return -1;
+
+ return 0;
+}
+
+static int mtk_pcie_hw_rd_cfg(struct mtk_pcie_port *port, u32 bus, pci_dev_t devfn,
+ int where, int size, ulong *val)
+{
+ u32 tmp;
+
+ writel(CFG_HEADER_DW0(CFG_WRRD_TYPE_0, CFG_RD_FMT),
+ port->base + PCIE_CFG_HEADER0);
+ writel(CFG_HEADER_DW1(where, size), port->base + PCIE_CFG_HEADER1);
+ writel(CFG_HEADER_DW2(where, PCI_FUNC(devfn), PCI_DEV(devfn), bus),
+ port->base + PCIE_CFG_HEADER2);
+
+ /* Trigger h/w to transmit Cfgrd TLP */
+ tmp = readl(port->base + PCIE_APP_TLP_REQ);
+ tmp |= APP_CFG_REQ;
+ writel(tmp, port->base + PCIE_APP_TLP_REQ);
+
+ /* Check completion status */
+ if (mtk_pcie_check_cfg_cpld(port))
+ return -1;
+
+ /* Read cpld payload of Cfgrd */
+ *val = readl(port->base + PCIE_CFG_RDATA);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ return 0;
+}
+
+static int mtk_pcie_hw_wr_cfg(struct mtk_pcie_port *port, u32 bus, pci_dev_t devfn,
+ int where, int size, u32 val)
+{
+ /* Write PCIe configuration transaction header for Cfgwr */
+ writel(CFG_HEADER_DW0(CFG_WRRD_TYPE_0, CFG_WR_FMT),
+ port->base + PCIE_CFG_HEADER0);
+ writel(CFG_HEADER_DW1(where, size), port->base + PCIE_CFG_HEADER1);
+ writel(CFG_HEADER_DW2(where, PCI_FUNC(devfn), PCI_DEV(devfn), bus),
+ port->base + PCIE_CFG_HEADER2);
+
+ /* Write Cfgwr data */
+ val = val << 8 * (where & 3);
+ writel(val, port->base + PCIE_CFG_WDATA);
+
+ /* Trigger h/w to transmit Cfgwr TLP */
+ val = readl(port->base + PCIE_APP_TLP_REQ);
+ val |= APP_CFG_REQ;
+ writel(val, port->base + PCIE_APP_TLP_REQ);
+
+ /* Check completion status */
+ return mtk_pcie_check_cfg_cpld(port);
+}
+
+static struct mtk_pcie_port *mtk_pcie_find_port(const struct udevice *bus,
+ pci_dev_t bdf)
+{
+ struct mtk_pcie *pcie = dev_get_priv(bus);
+ struct mtk_pcie_port *port;
+ struct udevice *dev;
+ struct pci_child_platdata *pplat = NULL;
+ int ret = 0;
+
+ if (PCI_BUS(bdf) != 0) {
+ ret = pci_get_bus(PCI_BUS(bdf), &dev);
+ if (ret) {
+ debug("No such device,ret = %d\n", ret);
+ return NULL;
+ }
+
+ while (dev->parent->seq != 0)
+ dev = dev->parent;
+
+ pplat = dev_get_parent_platdata(dev);
+ }
+
+ list_for_each_entry(port, &pcie->ports, list) {
+ if ((PCI_BUS(bdf) == 0) && (PCI_DEV(bdf) == port->slot))
+ return port;
+
+ if (PCI_BUS(bdf) != 0 && PCI_DEV(bdf) == 0 &&
+ PCI_DEV(pplat->devfn) == port->slot)
+ return port;
+ }
+
+ return NULL;
+}
+
+static int mtk_pcie_config_read(const struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct mtk_pcie_port *port;
+ int ret;
+
+ port = mtk_pcie_find_port(bus, bdf);
+ if (!port) {
+ *valuep = pci_get_ff(size);
+ return 0;
+ }
+
+ ret = mtk_pcie_hw_rd_cfg(port, PCI_BUS(bdf), bdf, offset, (1 << size), valuep);
+ if (ret)
+ *valuep = pci_get_ff(size);
+
+ return ret;
+}
+
+static int mtk_pcie_config_write(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct mtk_pcie_port *port;
+
+ port = mtk_pcie_find_port(bus, bdf);
+ if (!port)
+ return 0;
+
+ /* Do not modify RC bar 0/1. */
+ if (PCI_BUS(bdf) == 0 && (offset == 0x10 || offset == 0x14))
+ return 0;
+
+ return mtk_pcie_hw_wr_cfg(port, PCI_BUS(bdf), bdf, offset, (1 << size), value);
+}
+
+static const struct dm_pci_ops mtk_pcie_ops_v2 = {
+ .read_config = mtk_pcie_config_read,
+ .write_config = mtk_pcie_config_write,
+};
+
static void mtk_pcie_port_free(struct mtk_pcie_port *port)
{
list_del(&port->list);
return 0;
}
+static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
+{
+ struct mtk_pcie *pcie = port->pcie;
+ struct udevice *dev = pcie->priv;
+ struct pci_region *pci_mem;
+ u32 val;
+ int err;
+
+ /* MT7622/MT7629 platforms need to enable LTSSM and ASPM from PCIe subsys */
+ if (pcie->base) {
+ val = readl(pcie->base + PCIE_SYS_CFG_V2);
+ val |= PCIE_CSR_LTSSM_EN(port->slot) |
+ PCIE_CSR_ASPM_L1_EN(port->slot);
+ writel(val, pcie->base + PCIE_SYS_CFG_V2);
+ }
+
+ /* Assert all reset signals */
+ writel(0, port->base + PCIE_RST_CTRL);
+
+ /*
+ * Enable PCIe link down reset, if link status changed from link up to
+ * link down, this will reset MAC control registers and configuration
+ * space.
+ */
+ writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+ udelay(500);
+
+ /* De-assert PHY, PE, PIPE, MAC and configuration reset */
+ val = readl(port->base + PCIE_RST_CTRL);
+ val |= PCIE_PHY_RSTB | PCIE_PIPE_SRSTB | PCIE_MAC_SRSTB | PCIE_CRSTB;
+ writel(val, port->base + PCIE_RST_CTRL);
+
+ mdelay(100);
+ val |= PCIE_PERSTB;
+ writel(val, port->base + PCIE_RST_CTRL);
+
+ /* Set up vendor ID and class code */
+ val = PCI_VENDOR_ID_MEDIATEK;
+ writew(val, port->base + PCIE_CONF_VEND_ID);
+
+ val = PCI_CLASS_BRIDGE_PCI;
+ writew(val, port->base + PCIE_CONF_CLASS_ID);
+
+ /* 100ms timeout value should be enough for Gen1/2 training */
+ err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
+ !!(val & PCIE_PORT_LINKUP_V2),
+ 100 * 1000);
+ if (err)
+ return -ETIMEDOUT;
+
+ pci_get_regions(dev, NULL, &pci_mem, NULL);
+
+ /* Set AHB to PCIe translation windows */
+ val = lower_32_bits(pci_mem->bus_start) |
+ AHB2PCIE_SIZE(fls(pci_mem->size) - 1);
+ writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
+
+ val = upper_32_bits(pci_mem->bus_start);
+ writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
+
+ /* Set PCIe to AXI translation memory space.*/
+ val = PCIE2AHB_SIZE | WIN_ENABLE;
+ writel(val, port->base + PCIE_AXI_WINDOW0);
+
+ return 0;
+}
+
static void mtk_pcie_enable_port(struct mtk_pcie_port *port)
{
int err;
mtk_pcie_port_free(port);
}
+static void mtk_pcie_enable_port_v2(struct mtk_pcie_port *port)
+{
+ int err = 0;
+
+ err = clk_enable(&port->sys_ck);
+ if (err) {
+ debug("clk_enable(sys_ck) failed: %d\n", err);
+ goto exit;
+ }
+
+ err = clk_enable(&port->ahb_ck);
+ if (err) {
+ debug("clk_enable(ahb_ck) failed: %d\n", err);
+ goto exit;
+ }
+
+ err = clk_enable(&port->aux_ck);
+ if (err) {
+ debug("clk_enable(aux_ck) failed: %d\n", err);
+ goto exit;
+ }
+
+ err = clk_enable(&port->axi_ck);
+ if (err) {
+ debug("clk_enable(axi_ck) failed: %d\n", err);
+ goto exit;
+ }
+
+ err = clk_enable(&port->obff_ck);
+ if (err) {
+ debug("clk_enable(obff_ck) failed: %d\n", err);
+ goto exit;
+ }
+
+ err = clk_enable(&port->pipe_ck);
+ if (err) {
+ debug("clk_enable(pipe_ck) failed: %d\n", err);
+ goto exit;
+ }
+
+ err = mtk_pcie_startup_port_v2(port);
+ if (!err)
+ return;
+
+ pr_err("Port%d link down\n", port->slot);
+exit:
+ mtk_pcie_port_free(port);
+}
+
static int mtk_pcie_parse_port(struct udevice *dev, u32 slot)
{
struct mtk_pcie *pcie = dev_get_priv(dev);
return 0;
}
+static int mtk_pcie_parse_port_v2(struct udevice *dev, u32 slot)
+{
+ struct mtk_pcie *pcie = dev_get_priv(dev);
+ struct mtk_pcie_port *port;
+ char name[10];
+ int err;
+
+ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ snprintf(name, sizeof(name), "port%d", slot);
+ port->base = dev_remap_addr_name(dev, name);
+ if (!port->base) {
+ debug("failed to map port%d base\n", slot);
+ return -ENOENT;
+ }
+
+ snprintf(name, sizeof(name), "sys_ck%d", slot);
+ err = clk_get_by_name(dev, name, &port->sys_ck);
+ if (err) {
+ debug("clk_get_by_name(sys_ck) failed: %d\n", err);
+ return err;
+ }
+
+ snprintf(name, sizeof(name), "ahb_ck%d", slot);
+ err = clk_get_by_name(dev, name, &port->ahb_ck);
+ if (err) {
+ debug("clk_get_by_name(ahb_ck) failed: %d\n", err);
+ return err;
+ }
+
+ snprintf(name, sizeof(name), "aux_ck%d", slot);
+ err = clk_get_by_name(dev, name, &port->aux_ck);
+ if (err) {
+ debug("clk_get_by_name(aux_ck) failed: %d\n", err);
+ return err;
+ }
+
+ snprintf(name, sizeof(name), "axi_ck%d", slot);
+ err = clk_get_by_name(dev, name, &port->axi_ck);
+ if (err) {
+ debug("clk_get_by_name(axi_ck) failed: %d\n", err);
+ return err;
+ }
+
+ snprintf(name, sizeof(name), "obff_ck%d", slot);
+ err = clk_get_by_name(dev, name, &port->obff_ck);
+ if (err) {
+ debug("clk_get_by_name(obff_ck) failed: %d\n", err);
+ return err;
+ }
+
+ snprintf(name, sizeof(name), "pipe_ck%d", slot);
+ err = clk_get_by_name(dev, name, &port->pipe_ck);
+ if (err) {
+ debug("clk_get_by_name(pipe_ck) failed: %d\n", err);
+ return err;
+ }
+
+ port->slot = slot;
+ port->pcie = pcie;
+
+ INIT_LIST_HEAD(&port->list);
+ list_add_tail(&port->list, &pcie->ports);
+
+ return 0;
+}
+
static int mtk_pcie_probe(struct udevice *dev)
{
struct mtk_pcie *pcie = dev_get_priv(dev);
return 0;
}
+static int mtk_pcie_probe_v2(struct udevice *dev)
+{
+ struct mtk_pcie *pcie = dev_get_priv(dev);
+ struct mtk_pcie_port *port, *tmp;
+ struct fdt_pci_addr addr;
+ ofnode subnode;
+ unsigned int slot;
+ int err;
+
+ INIT_LIST_HEAD(&pcie->ports);
+
+ pcie->base = dev_remap_addr_name(dev, "subsys");
+ if (!pcie->base)
+ return -ENOENT;
+
+ pcie->priv = dev;
+
+ dev_for_each_subnode(subnode, dev) {
+ if (!ofnode_is_available(subnode))
+ continue;
+
+ err = ofnode_read_pci_addr(subnode, 0, "reg", &addr);
+ if (err)
+ return err;
+
+ slot = PCI_DEV(addr.phys_hi);
+ err = mtk_pcie_parse_port_v2(dev, slot);
+ if (err)
+ return err;
+ }
+
+ /* enable each port, and then check link status */
+ list_for_each_entry_safe(port, tmp, &pcie->ports, list)
+ mtk_pcie_enable_port_v2(port);
+
+ return 0;
+}
+
static const struct udevice_id mtk_pcie_ids[] = {
- { .compatible = "mediatek,mt7623-pcie", },
+ { .compatible = "mediatek,mt7623-pcie", PCIE_V1},
{ }
};
-U_BOOT_DRIVER(pcie_mediatek) = {
- .name = "pcie_mediatek",
+U_BOOT_DRIVER(pcie_mediatek_v1) = {
+ .name = "pcie_mediatek_v1",
.id = UCLASS_PCI,
.of_match = mtk_pcie_ids,
.ops = &mtk_pcie_ops,
.probe = mtk_pcie_probe,
.priv_auto_alloc_size = sizeof(struct mtk_pcie),
};
+
+static const struct udevice_id mtk_pcie_ids_v2[] = {
+ { .compatible = "mediatek,mt7622-pcie", PCIE_V2},
+ { }
+};
+
+U_BOOT_DRIVER(pcie_mediatek_v2) = {
+ .name = "pcie_mediatek_v2",
+ .id = UCLASS_PCI,
+ .of_match = mtk_pcie_ids_v2,
+ .ops = &mtk_pcie_ops_v2,
+ .probe = mtk_pcie_probe_v2,
+ .priv_auto_alloc_size = sizeof(struct mtk_pcie),
+};
#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4 0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
+#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
+#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define PHYD_DESIGN_OPTION2 0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
+#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
+
+#define PHYD_DESIGN_OPTION9 0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK GENMASK(20, 16)
+#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK GENMASK(13, 8)
+#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK GENMASK(7, 5)
+#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK GENMASK(4, 0)
+#define RG_T2_MIN_VAL(x) (0x1f & (x))
+
+#define ANA_RG_CTRL_SIGNAL1 0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
+#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL4 0x58
+#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
+#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL6 0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
+#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
+#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
+#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
+#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
+
enum mtk_phy_version {
MTK_TPHY_V1 = 1,
MTK_TPHY_V2,
udelay(3000);
}
+static void sata_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL6,
+ RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK,
+ RG_CDR_BIRLTR_GEN1_VAL(0x6) |
+ RG_CDR_BC_GEN1_VAL(0x1a));
+ clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL4,
+ RG_CDR_BIRLTD0_GEN1_MSK,
+ RG_CDR_BIRLTD0_GEN1_VAL(0x18));
+ clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL5,
+ RG_CDR_BIRLTD0_GEN3_MSK,
+ RG_CDR_BIRLTD0_GEN3_VAL(0x06));
+ clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL4,
+ RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK,
+ RG_CDR_BICLTR_GEN1_VAL(0x0c) |
+ RG_CDR_BR_GEN2_VAL(0x07));
+ clrsetbits_le32(u3_banks->phyd + PHYD_CTRL_SIGNAL_MODE4,
+ RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK,
+ RG_CDR_BICLTD0_GEN1_VAL(0x08) |
+ RG_CDR_BICLTD1_GEN1_VAL(0x02));
+ clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION2,
+ RG_LOCK_CNT_SEL_MSK,
+ RG_LOCK_CNT_SEL_VAL(0x02));
+ clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION9,
+ RG_T2_MIN_MSK | RG_TG_MIN_MSK |
+ RG_T2_MAX_MSK | RG_TG_MAX_MSK,
+ RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
+ RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e));
+ clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL1,
+ RG_IDRV_0DB_GEN1_MSK,
+ RG_IDRV_0DB_GEN1_VAL(0x20));
+ clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL1,
+ RG_EQ_DLEQ_LFI_GEN1_MSK,
+ RG_EQ_DLEQ_LFI_GEN1_VAL(0x03));
+}
+
static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
break;
+ case PHY_TYPE_SATA:
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ break;
default:
dev_err(tphy->dev, "incompatible PHY type\n");
return;
case PHY_TYPE_PCIE:
pcie_phy_instance_init(tphy, instance);
break;
+ case PHY_TYPE_SATA:
+ sata_phy_instance_init(tphy, instance);
+ break;
default:
dev_err(tphy->dev, "incompatible PHY type\n");
return -EINVAL;
instance->type = args->args[1];
if (!(instance->type == PHY_TYPE_USB2 ||
instance->type == PHY_TYPE_USB3 ||
+ instance->type == PHY_TYPE_SATA ||
instance->type == PHY_TYPE_PCIE)) {
dev_err(phy->dev, "unsupported device type\n");
return -EINVAL;
tphy->dev = dev;
tphy->version = dev_get_driver_data(dev);
- /* v1 has shared banks */
+ /* v1 has shared banks for usb/pcie mode, */
+ /* but not for sata mode */
if (tphy->version == MTK_TPHY_V1) {
tphy->sif_base = dev_read_addr_ptr(dev);
- if (!tphy->sif_base)
- return -ENOENT;
}
dev_for_each_subnode(subnode, dev) {
#include <dm.h>
#include <generic-phy.h>
+#define DRIVER_DATA 0x12345678
+
struct sandbox_phy_priv {
bool initialized;
bool on;
return 0;
}
+static int sandbox_phy_bind(struct udevice *dev)
+{
+ if (dev_get_driver_data(dev) != DRIVER_DATA)
+ return -ENODATA;
+
+ return 0;
+}
+
static int sandbox_phy_probe(struct udevice *dev)
{
struct sandbox_phy_priv *priv = dev_get_priv(dev);
};
static const struct udevice_id sandbox_phy_ids[] = {
- { .compatible = "sandbox,phy" },
+ { .compatible = "sandbox,phy_no_driver_data",
+ },
+
+ { .compatible = "sandbox,phy",
+ .data = DRIVER_DATA
+ },
{ }
};
U_BOOT_DRIVER(phy_sandbox) = {
.name = "phy_sandbox",
.id = UCLASS_PHY,
+ .bind = sandbox_phy_bind,
.of_match = sandbox_phy_ids,
.ops = &sandbox_phy_ops,
.probe = sandbox_phy_probe,
};
static const struct mtk_pin_field_calc mt8512_pin_do_range[] = {
- PIN_FIELD(0, 115, 0x860, 0x10, 0, 1),
+ PIN_FIELD(0, 115, 0x0A0, 0x10, 0, 1),
};
static const struct mtk_pin_field_calc mt8512_pin_pullen_range[] = {
- PIN_FIELD(0, 115, 0x900, 0x10, 0, 1),
+ PIN_FIELD(0, 115, 0x860, 0x10, 0, 1),
};
static const struct mtk_pin_field_calc mt8512_pin_pullsel_range[] = {
- PIN_FIELD(0, 115, 0x0A0, 0x10, 0, 1),
+ PIN_FIELD(0, 115, 0x900, 0x10, 0, 1),
};
static const struct mtk_pin_field_calc mt8512_pin_ies_range[] = {
return -EINVAL;
}
- priv->base_reg = devfdt_get_addr_ptr(dev);
- if (priv->base_reg == (void *)FDT_ADDR_T_NONE) {
+ priv->base_reg = dev_read_addr_ptr(dev);
+ if (!priv->base_reg) {
debug("%s: Failed to get base address\n", __func__);
return -EINVAL;
}
priv->info.size = get_ram_size((long *)priv->info.base,
ddr_size);
- debug("%s : %lx\n", __func__, priv->info.size);
+ debug("%s : %lx\n", __func__, (uintptr_t)priv->info.size);
/* check memory access for all memory */
if (priv->info.size != ddr_size) {
printf("DDR invalid size : 0x%lx, expected 0x%lx\n",
- priv->info.size, (uintptr_t)ddr_size);
+ (uintptr_t)priv->info.size, (uintptr_t)ddr_size);
return -EINVAL;
}
u32 modrst_offset;
void __iomem *membase;
- membase = devfdt_get_addr_ptr(dev);
+ membase = dev_read_addr_ptr(dev);
modrst_offset = dev_read_u32_default(dev, "altr,modrst-offset", 0x10);
data->modrst_base = membase + modrst_offset;
{
struct mvebu_platdata *plat = dev_get_platdata(dev);
- plat->base = devfdt_get_addr_ptr(dev);
+ plat->base = dev_read_addr_ptr(dev);
return 0;
}
priv->uartclk = clk_data->clk_rate;
- /* flush the trasmitter empty before changing hw setting */
+ /* flush the trasmitter before changing hw setting */
while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT))
;
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- plat->base = devfdt_get_addr_ptr(bus);
+ plat->base = dev_read_addr_ptr(bus);
plat->frequency =
fdtdec_get_int(blob, node, "spi-max-frequency", 12500000);
{
struct socfpga_sysreset_data *data = dev_get_priv(dev);
- data->rstmgr_base = devfdt_get_addr_ptr(dev);
+ data->rstmgr_base = dev_read_addr_ptr(dev);
return 0;
}
{
struct ast_timer_priv *priv = dev_get_priv(dev);
- priv->regs = devfdt_get_addr_ptr(dev);
- if (IS_ERR(priv->regs))
- return PTR_ERR(priv->regs);
+ priv->regs = dev_read_addr_ptr(dev);
+ if (!priv->regs)
+ return -EINVAL;
priv->tmc = ast_get_timer_counter(priv->regs, AST_TICK_TIMER);
{
struct atmel_pit_platdata *plat = dev_get_platdata(dev);
- plat->regs = (struct atmel_pit_regs *)devfdt_get_addr_ptr(dev);
+ plat->regs = dev_read_addr_ptr(dev);
return 0;
}
{
struct zynq_ehci_priv *priv = dev_get_priv(dev);
- priv->ehci = (struct usb_ehci *)devfdt_get_addr_ptr(dev);
+ priv->ehci = dev_read_addr_ptr(dev);
if (!priv->ehci)
return -EINVAL;
out On-screen Display (OSD) used on gdsys FPGAs to control dynamic
textual overlays of the display outputs.
+config SPLASH_SCREEN
+ bool "Show a splash-screen image"
+ help
+ If this option is set, the environment is checked for a variable
+ "splashimage". If found, the usual display of logo, copyright and
+ system information on the LCD is suppressed and the BMP image at the
+ address specified in "splashimage" is loaded instead. The console is
+ redirected to the "nulldev", too. This allows for a "silent" boot
+ where a splash screen is loaded very quickly after power-on.
+
+ The splash_screen_prepare() function is a weak function defined in
+ common/splash.c. It is called as part of the splash screen display
+ sequence. It gives the board an opportunity to prepare the splash
+ image data before it is processed and sent to the frame buffer by
+ U-Boot. Define your own version to use this feature.
+
+config SPLASHIMAGE_GUARD
+ bool "Support unaligned BMP images"
+ depends on SPLASH_SCREEN
+ help
+ If this option is set, then U-Boot will prevent the environment
+ variable "splashimage" from being set to a problematic address
+ (see doc/README.displaying-bmps).
+
+ This option is useful for targets where, due to alignment
+ restrictions, an improperly aligned BMP image will cause a data
+ abort. If you think you will not have problems with unaligned
+ accesses (for example because your toolchain prevents them)
+ there is no need to set this option.
+
+config SPLASH_SCREEN_ALIGN
+ bool "Allow positioning the splash image anywhere on the display"
+ depends on SPLASH_SCREEN || CMD_BMP
+ help
+ If this option is set the splash image can be freely positioned
+ on the screen. Environment variable "splashpos" specifies the
+ position as "x,y". If a positive number is given it is used as
+ number of pixel from left/top. If a negative number is given it
+ is used as number of pixel from right/bottom. You can also
+ specify 'm' for centering the image.
+
+ Example:
+ setenv splashpos m,m
+ => image at center of screen
+
+ setenv splashpos 30,20
+ => image at x = 30 and y = 20
+
+ setenv splashpos -10,m
+ => vertically centered image
+ at x = dspWidth - bmpWidth - 9
+
+config SPLASH_SOURCE
+ bool "Control the source of the splash image"
+ depends on SPLASH_SCREEN
+ help
+ Use the splash_source.c library. This library provides facilities to
+ declare board specific splash image locations, routines for loading
+ splash image from supported locations, and a way of controlling the
+ selected splash location using the "splashsource" environment
+ variable.
+
+ This CONFIG works as follows:
+
+ - If splashsource is set to a supported location name as defined by
+ board code, use that splash location.
+ - If splashsource is undefined, use the first splash location as
+ default.
+ - If splashsource is set to an unsupported value, do not load a splash
+ screen.
+
+ A splash source location can describe either storage with raw data, a
+ storage formatted with a file system or a FIT image. In case of a
+ filesystem, the splash screen data is loaded as a file. The name of
+ the splash screen file can be controlled with the environment variable
+ "splashfile".
+
+ To enable loading the splash image from a FIT image, CONFIG_FIT must
+ be enabled. The FIT image has to start at the 'offset' field address
+ in the selected splash location. The name of splash image within the
+ FIT shall be specified by the environment variable "splashfile".
+
+ In case the environment variable "splashfile" is not defined the
+ default name 'splash.bmp' will be used.
+
endmenu
return ret;
desc->blksz = 512;
+ desc->log2blksz = 9;
virtio_cread(dev, struct virtio_blk_config, capacity, &cap);
desc->lba = cap;
The watchdog timer is stopped when initialized.
It performs full SoC reset.
+config WDT_OCTEONTX
+ bool "OcteonTX core watchdog support"
+ depends on WDT && (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ default y
+ imply WATCHDOG
+ help
+ This enables OcteonTX watchdog driver, which can be
+ found on OcteonTX/TX2 chipsets and inline with driver model.
+ Only supports watchdog reset.
+
config WDT_OMAP3
bool "TI OMAP watchdog timer support"
depends on WDT && ARCH_OMAP2PLUS
obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
+obj-$(CONFIG_WDT_OCTEONTX) += octeontx_wdt.o
obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o
obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o
{
struct ast_wdt_priv *priv = dev_get_priv(dev);
- priv->regs = devfdt_get_addr_ptr(dev);
- if (IS_ERR(priv->regs))
- return PTR_ERR(priv->regs);
+ priv->regs = dev_read_addr_ptr(dev);
+ if (!priv->regs)
+ return -EINVAL;
return 0;
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <dm.h>
+#include <errno.h>
+#include <wdt.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CORE0_POKE_OFFSET 0x50000
+#define CORE0_POKE_OFFSET_MASK 0xfffffULL
+
+struct octeontx_wdt {
+ void __iomem *reg;
+};
+
+static int octeontx_wdt_reset(struct udevice *dev)
+{
+ struct octeontx_wdt *priv = dev_get_priv(dev);
+
+ writeq(~0ULL, priv->reg);
+
+ return 0;
+}
+
+static int octeontx_wdt_probe(struct udevice *dev)
+{
+ struct octeontx_wdt *priv = dev_get_priv(dev);
+
+ priv->reg = dev_remap_addr(dev);
+ if (!priv->reg)
+ return -EINVAL;
+
+ /*
+ * Save core poke register address in reg (its not 0xa0000 as
+ * extracted from the DT but 0x50000 instead)
+ */
+ priv->reg = (void __iomem *)(((u64)priv->reg &
+ ~CORE0_POKE_OFFSET_MASK) |
+ CORE0_POKE_OFFSET);
+
+ return 0;
+}
+
+static const struct wdt_ops octeontx_wdt_ops = {
+ .reset = octeontx_wdt_reset,
+};
+
+static const struct udevice_id octeontx_wdt_ids[] = {
+ { .compatible = "arm,sbsa-gwdt" },
+ {}
+};
+
+U_BOOT_DRIVER(wdt_octeontx) = {
+ .name = "wdt_octeontx",
+ .id = UCLASS_WDT,
+ .of_match = octeontx_wdt_ids,
+ .ops = &octeontx_wdt_ops,
+ .priv_auto_alloc_size = sizeof(struct octeontx_wdt),
+ .probe = octeontx_wdt_probe,
+};
nflags = gnttab_table[ref].flags;
do {
- if ((flags = nflags) & (GTF_reading | GTF_writing)) {
+ flags = nflags;
+ if ((flags) & (GTF_reading | GTF_writing)) {
printf("WARNING: g.e. still in use! (%x)\n", flags);
return 0;
}
snprintf(path, sizeof(path), "%s/state", dev->backend);
snprintf(nodename, sizeof(nodename), "%s/state", dev->nodename);
- if ((err = xenbus_switch_state(XBT_NIL, nodename,
- XenbusStateClosing)) != NULL) {
+ err = xenbus_switch_state(XBT_NIL, nodename, XenbusStateClosing);
+ if (err) {
printf("%s: error changing state to %d: %s\n", __func__,
XenbusStateClosing, err);
goto close;
err = xenbus_wait_for_state_change(path, &state);
free(err);
- if ((err = xenbus_switch_state(XBT_NIL, nodename,
- XenbusStateClosed)) != NULL) {
+ err = xenbus_switch_state(XBT_NIL, nodename, XenbusStateClosed);
+ if (err) {
printf("%s: error changing state to %d: %s\n", __func__,
XenbusStateClosed, err);
goto close;
free(err);
}
- if ((err = xenbus_switch_state(XBT_NIL, nodename,
- XenbusStateInitialising)) != NULL) {
+ err = xenbus_switch_state(XBT_NIL, nodename, XenbusStateInitialising);
+ if (err) {
printf("%s: error changing state to %d: %s\n", __func__,
XenbusStateInitialising, err);
goto close;
#include "sqfs_filesystem.h"
#include "sqfs_utils.h"
-struct squashfs_ctxt {
- struct disk_partition cur_part_info;
- struct blk_desc *cur_dev;
- struct squashfs_super_block *sblk;
-};
-
static struct squashfs_ctxt ctxt;
static int sqfs_disk_read(__u32 block, __u32 nr_blocks, void *buf)
struct squashfs_super_block *sblk = ctxt.sblk;
unsigned long dest_len;
int block, offset, ret;
- u16 header, comp_type;
-
- comp_type = get_unaligned_le16(&sblk->compression);
+ u16 header;
if (inode_fragment_index >= get_unaligned_le32(&sblk->fragments))
return -EINVAL;
header = get_unaligned_le16(metadata_buffer + table_offset);
metadata = metadata_buffer + table_offset + SQFS_HEADER_SIZE;
+ if (!metadata) {
+ ret = -ENOMEM;
+ goto free_buffer;
+ }
+
entries = malloc(SQFS_METADATA_BLOCK_SIZE);
if (!entries) {
ret = -ENOMEM;
if (SQFS_COMPRESSED_METADATA(header)) {
src_len = SQFS_METADATA_SIZE(header);
dest_len = SQFS_METADATA_BLOCK_SIZE;
- ret = sqfs_decompress(comp_type, entries, &dest_len, metadata,
+ ret = sqfs_decompress(&ctxt, entries, &dest_len, metadata,
src_len);
if (ret) {
ret = -EINVAL;
*/
static int sqfs_tokenize(char **tokens, int count, const char *str)
{
+ int i, j, ret = 0;
char *aux, *strc;
- int i, j;
strc = strdup(str);
if (!strc)
if (!strcmp(strc, "/")) {
tokens[0] = strdup(strc);
if (!tokens[0]) {
- free(strc);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto free_strc;
}
} else {
for (j = 0; j < count; j++) {
if (!tokens[j]) {
for (i = 0; i < j; i++)
free(tokens[i]);
- free(strc);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto free_strc;
}
}
}
+free_strc:
free(strc);
- return 0;
+ return ret;
}
/*
{
struct squashfs_super_block *sblk = ctxt.sblk;
char *path, *target, **sym_tokens, *res, *rem;
+ struct squashfs_ldir_inode *ldir = NULL;
int j, ret, new_inode_number, offset;
struct squashfs_symlink_inode *sym;
- struct squashfs_ldir_inode *ldir;
struct squashfs_dir_inode *dir;
struct fs_dir_stream *dirsp;
struct fs_dirent *dent;
{
struct squashfs_super_block *sblk = ctxt.sblk;
u64 start, n_blks, table_offset, table_size;
- int j, ret = 0, metablks_count, comp_type;
+ int j, ret = 0, metablks_count;
unsigned char *src_table, *itb;
u32 src_len, dest_offset = 0;
- unsigned long dest_len;
+ unsigned long dest_len = 0;
bool compressed;
- comp_type = get_unaligned_le16(&sblk->compression);
table_size = get_unaligned_le64(&sblk->directory_table_start) -
get_unaligned_le64(&sblk->inode_table_start);
start = get_unaligned_le64(&sblk->inode_table_start) /
sqfs_read_metablock(itb, table_offset, &compressed, &src_len);
if (compressed) {
dest_len = SQFS_METADATA_BLOCK_SIZE;
- ret = sqfs_decompress(comp_type, *inode_table +
+ ret = sqfs_decompress(&ctxt, *inode_table +
dest_offset, &dest_len,
src_table, src_len);
if (ret) {
goto free_itb;
}
+ dest_offset += dest_len;
} else {
memcpy(*inode_table + (j * SQFS_METADATA_BLOCK_SIZE),
src_table, src_len);
* Offsets to the decompression destination, to the metadata
* buffer 'itb' and to the decompression source, respectively.
*/
- dest_offset += dest_len;
+
table_offset += src_len + SQFS_HEADER_SIZE;
src_table += src_len + SQFS_HEADER_SIZE;
}
static int sqfs_read_directory_table(unsigned char **dir_table, u32 **pos_list)
{
u64 start, n_blks, table_offset, table_size;
- int j, ret = 0, metablks_count = -1, comp_type;
struct squashfs_super_block *sblk = ctxt.sblk;
+ int j, ret = 0, metablks_count = -1;
unsigned char *src_table, *dtb;
u32 src_len, dest_offset = 0;
- unsigned long dest_len;
+ unsigned long dest_len = 0;
bool compressed;
- comp_type = get_unaligned_le16(&sblk->compression);
-
/* DIRECTORY TABLE */
table_size = get_unaligned_le64(&sblk->fragment_table_start) -
get_unaligned_le64(&sblk->directory_table_start);
sqfs_read_metablock(dtb, table_offset, &compressed, &src_len);
if (compressed) {
dest_len = SQFS_METADATA_BLOCK_SIZE;
- ret = sqfs_decompress(comp_type, *dir_table +
+ ret = sqfs_decompress(&ctxt, *dir_table +
(j * SQFS_METADATA_BLOCK_SIZE),
&dest_len, src_table, src_len);
if (ret) {
dest_offset += dest_len;
break;
}
+
+ dest_offset += dest_len;
} else {
memcpy(*dir_table + (j * SQFS_METADATA_BLOCK_SIZE),
src_table, src_len);
* Offsets to the decompression destination, to the metadata
* buffer 'dtb' and to the decompression source, respectively.
*/
- dest_offset += dest_len;
table_offset += src_len + SQFS_HEADER_SIZE;
src_table += src_len + SQFS_HEADER_SIZE;
}
ctxt.sblk = sblk;
+ ret = sqfs_decompressor_init(&ctxt);
+
+ if (ret) {
+ ctxt.cur_dev = NULL;
+ free(ctxt.sblk);
+ return -EINVAL;
+ }
+
return 0;
}
finfo->start = get_unaligned_le32(®->start_block);
finfo->frag = SQFS_IS_FRAGMENTED(get_unaligned_le32(®->fragment));
+ if (finfo->size < 1 || finfo->offset < 0 || finfo->start < 0)
+ return -EINVAL;
+
if (finfo->frag) {
datablk_count = finfo->size / le32_to_cpu(blksz);
ret = sqfs_frag_lookup(get_unaligned_le32(®->fragment),
if (ret < 0)
return -EINVAL;
finfo->comp = true;
+ if (fentry->size < 1 || fentry->start < 0)
+ return -EINVAL;
} else {
datablk_count = DIV_ROUND_UP(finfo->size, le32_to_cpu(blksz));
}
finfo->start = get_unaligned_le64(&lreg->start_block);
finfo->frag = SQFS_IS_FRAGMENTED(get_unaligned_le32(&lreg->fragment));
+ if (finfo->size < 1 || finfo->offset < 0 || finfo->start < 0)
+ return -EINVAL;
+
if (finfo->frag) {
datablk_count = finfo->size / le32_to_cpu(blksz);
ret = sqfs_frag_lookup(get_unaligned_le32(&lreg->fragment),
if (ret < 0)
return -EINVAL;
finfo->comp = true;
+ if (fentry->size < 1 || fentry->start < 0)
+ return -EINVAL;
} else {
datablk_count = DIV_ROUND_UP(finfo->size, le32_to_cpu(blksz));
}
char *dir, *fragment_block, *datablock = NULL, *data_buffer = NULL;
char *fragment, *file, *resolved, *data;
u64 start, n_blks, table_size, data_offset, table_offset;
- int ret, j, i_number, comp_type, datablk_count = 0;
+ int ret, j, i_number, datablk_count = 0;
struct squashfs_super_block *sblk = ctxt.sblk;
struct squashfs_fragment_block_entry frag_entry;
struct squashfs_file_info finfo = {0};
*actread = 0;
- comp_type = get_unaligned_le16(&sblk->compression);
-
/*
* sqfs_opendir will uncompress inode and directory tables, and will
* return a pointer to the directory that contains the requested file.
/* Load the data */
if (SQFS_COMPRESSED_BLOCK(finfo.blk_sizes[j])) {
dest_len = get_unaligned_le32(&sblk->block_size);
- ret = sqfs_decompress(comp_type, datablock, &dest_len,
+ ret = sqfs_decompress(&ctxt, datablock, &dest_len,
data, table_size);
if (ret)
goto free_buffer;
goto free_fragment;
}
- ret = sqfs_decompress(comp_type, fragment_block, &dest_len,
+ ret = sqfs_decompress(&ctxt, fragment_block, &dest_len,
(void *)fragment + table_offset,
frag_entry.size);
if (ret) {
{
free(ctxt.sblk);
ctxt.cur_dev = NULL;
+ sqfs_decompressor_cleanup(&ctxt);
}
void sqfs_closedir(struct fs_dir_stream *dirs)
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
+
+#if IS_ENABLED(CONFIG_LZO)
+#include <linux/lzo.h>
+#endif
+
#if IS_ENABLED(CONFIG_ZLIB)
#include <u-boot/zlib.h>
#endif
+#if IS_ENABLED(CONFIG_ZSTD)
+#include <linux/zstd.h>
+#endif
+
#include "sqfs_decompressor.h"
-#include "sqfs_filesystem.h"
#include "sqfs_utils.h"
+int sqfs_decompressor_init(struct squashfs_ctxt *ctxt)
+{
+ u16 comp_type = get_unaligned_le16(&ctxt->sblk->compression);
+
+ switch (comp_type) {
+#if IS_ENABLED(CONFIG_LZO)
+ case SQFS_COMP_LZO:
+ break;
+#endif
+#if IS_ENABLED(CONFIG_ZLIB)
+ case SQFS_COMP_ZLIB:
+ break;
+#endif
+#if IS_ENABLED(CONFIG_ZSTD)
+ case SQFS_COMP_ZSTD:
+ ctxt->zstd_workspace = malloc(ZSTD_DCtxWorkspaceBound());
+ if (!ctxt->zstd_workspace)
+ return -ENOMEM;
+ break;
+#endif
+ default:
+ printf("Error: unknown compression type.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void sqfs_decompressor_cleanup(struct squashfs_ctxt *ctxt)
+{
+ u16 comp_type = get_unaligned_le16(&ctxt->sblk->compression);
+
+ switch (comp_type) {
+#if IS_ENABLED(CONFIG_LZO)
+ case SQFS_COMP_LZO:
+ break;
+#endif
+#if IS_ENABLED(CONFIG_ZLIB)
+ case SQFS_COMP_ZLIB:
+ break;
+#endif
+#if IS_ENABLED(CONFIG_ZSTD)
+ case SQFS_COMP_ZSTD:
+ free(ctxt->zstd_workspace);
+ break;
+#endif
+ }
+}
+
#if IS_ENABLED(CONFIG_ZLIB)
static void zlib_decompression_status(int ret)
{
}
#endif
-int sqfs_decompress(u16 comp_type, void *dest, unsigned long *dest_len,
- void *source, u32 lenp)
+#if IS_ENABLED(CONFIG_ZSTD)
+static int sqfs_zstd_decompress(struct squashfs_ctxt *ctxt, void *dest,
+ unsigned long dest_len, void *source, u32 src_len)
+{
+ ZSTD_DCtx *ctx;
+ size_t wsize;
+ int ret;
+
+ wsize = ZSTD_DCtxWorkspaceBound();
+ ctx = ZSTD_initDCtx(ctxt->zstd_workspace, wsize);
+ ret = ZSTD_decompressDCtx(ctx, dest, dest_len, source, src_len);
+
+ return ZSTD_isError(ret);
+}
+#endif /* CONFIG_ZSTD */
+
+int sqfs_decompress(struct squashfs_ctxt *ctxt, void *dest,
+ unsigned long *dest_len, void *source, u32 src_len)
{
+ u16 comp_type = get_unaligned_le16(&ctxt->sblk->compression);
int ret = 0;
switch (comp_type) {
+#if IS_ENABLED(CONFIG_LZO)
+ case SQFS_COMP_LZO: {
+ size_t lzo_dest_len = *dest_len;
+ ret = lzo1x_decompress_safe(source, src_len, dest, &lzo_dest_len);
+ if (ret) {
+ printf("LZO decompression failed. Error code: %d\n", ret);
+ return -EINVAL;
+ }
+
+ break;
+ }
+#endif
#if IS_ENABLED(CONFIG_ZLIB)
case SQFS_COMP_ZLIB:
- ret = uncompress(dest, dest_len, source, lenp);
+ ret = uncompress(dest, dest_len, source, src_len);
if (ret) {
zlib_decompression_status(ret);
return -EINVAL;
break;
#endif
+#if IS_ENABLED(CONFIG_ZSTD)
+ case SQFS_COMP_ZSTD:
+ ret = sqfs_zstd_decompress(ctxt, dest, *dest_len, source, src_len);
+ if (ret) {
+ printf("ZSTD Error code: %d\n", ZSTD_getErrorCode(ret));
+ return -EINVAL;
+ }
+
+ break;
+#endif
default:
printf("Error: unknown compression type.\n");
return -EINVAL;
#define SQFS_DECOMPRESSOR_H
#include <stdint.h>
+#include "sqfs_filesystem.h"
#define SQFS_COMP_ZLIB 1
#define SQFS_COMP_LZMA 2
struct squashfs_lzo_opts *lzo;
};
-int sqfs_decompress(u16 comp_type, void *dest, unsigned long *dest_len,
- void *source, u32 lenp);
+int sqfs_decompress(struct squashfs_ctxt *ctxt, void *dest,
+ unsigned long *dest_len, void *source, u32 src_len);
+int sqfs_decompressor_init(struct squashfs_ctxt *ctxt);
+void sqfs_decompressor_cleanup(struct squashfs_ctxt *ctxt);
#endif /* SQFS_DECOMPRESSOR_H */
return -EINVAL;
}
+ if (offset < 0)
+ return -EINVAL;
+
for (j = 0; j < m_count; j++) {
if (m_list[j] == start_block)
return (++j * SQFS_METADATA_BLOCK_SIZE) + offset;
#define SQFS_FILESYSTEM_H
#include <asm/unaligned.h>
-#include <stdint.h>
#include <fs.h>
+#include <part.h>
+#include <stdint.h>
#define SQFS_UNCOMPRESSED_DATA 0x0002
#define SQFS_MAGIC_NUMBER 0x73717368
__le64 export_table_start;
};
+struct squashfs_ctxt {
+ struct disk_partition cur_part_info;
+ struct blk_desc *cur_dev;
+ struct squashfs_super_block *sblk;
+#if IS_ENABLED(CONFIG_ZSTD)
+ void *zstd_workspace;
+#endif
+};
+
struct squashfs_directory_index {
u32 index;
u32 start;
int sqfs_read_metablock(unsigned char *file_mapping, int offset,
bool *compressed, u32 *data_size)
{
- unsigned char *data;
+ const unsigned char *data;
u16 header;
data = file_mapping + offset;
header = get_unaligned((u16 *)data);
+ if (!header || !data)
+ return -EINVAL;
+
*compressed = SQFS_COMPRESSED_METADATA(header);
*data_size = SQFS_METADATA_SIZE(header);
static inline size_t get_sector_buf_size(void)
{
- return (size_t)CONFIG_FASTBOOT_BUF_SIZE;
+ return (size_t)CONFIG_AVB_BUF_SIZE;
}
static inline void *get_sector_buf(void)
{
- return map_sysmem(CONFIG_FASTBOOT_BUF_ADDR, CONFIG_FASTBOOT_BUF_SIZE);
+ return map_sysmem(CONFIG_AVB_BUF_ADDR, CONFIG_AVB_BUF_SIZE);
}
static inline bool is_buf_unaligned(void *buffer)
/* LCD */
#ifdef CONFIG_CMD_BMP
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_LCD_LOGO
#define CONFIG_SHARP_LQ035Q7DH06
#endif
*/
#undef CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
-
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer and LCD */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer */
/* check this console not needed, after test remove it */
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_NET_RETRY_COUNT 10
/* Network console */
-#define CONFIG_NETCONSOLE 1
#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
/* As stated above, the following choices are optional. */
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Display */
#define CONFIG_IMX_HDMI
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SOURCE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_MXS
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer and LCD */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_BOOTP_BOOTFILESIZE
#endif
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
/*
* Clock Configuration
*/
#define CONFIG_SKIP_LOWLEVEL_INIT
#ifdef CONFIG_VIDEO_FSL_DCU_FB
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SYS_FSL_DCU_LE
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
#endif
/*
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_HW_WATCHDOG
/* Network hardware configuration */
#define CONFIG_DRIVER_EP93XX_MAC
#define CONFIG_MII_SUPPRESS_PREAMBLE
-#undef CONFIG_NETCONSOLE
/* SDRAM configuration */
#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */
#define CONFIG_PHY_BASE_ADR 0x8
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
-#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#endif
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USBD_HS
-#define CONFIG_NETCONSOLE
/* Framebuffer and LCD */
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
/* Miscellaneous configurable options */
#ifdef CONFIG_VIDEO_IPUV3
# define CONFIG_IMX_VIDEO_SKIP
-# define CONFIG_SPLASH_SCREEN
-# define CONFIG_SPLASH_SCREEN_ALIGN
# define CONFIG_BMP_16BPP
# define CONFIG_VIDEO_BMP_RLE8
# define CONFIG_VIDEO_LOGO
#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
#endif
/*
*/
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASHIMAGE_GUARD
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
/* LVDS display */
#define CONFIG_SYS_LDB_CLOCK 33260000
#define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_SPLASH_SOURCE
/* IIM Fuses */
#define CONFIG_FSL_IIM
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define STDOUT_CFG "vidconsole,serial"
#else
#define STDOUT_CFG "serial"
/* Framebuffer support */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
/* Framebuffer support */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_USBD_HS
-#define CONFIG_NETCONSOLE
#define CONFIG_MXC_UART_BASE UART2_BASE
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_SPLASH_SCREEN
/* functions for cfb_console */
#define VIDEO_KBD_INIT_FCT rx51_kp_init()
#define CONFIG_MXC_USB_FLAGS 0
/* Gadget part */
#define CONFIG_USBD_HS
-#define CONFIG_NETCONSOLE
#endif
/* Video output */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
/* Ethernet driver configuration */
#ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 1
#define CONFIG_RESET_PHY_R
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __OCTEONTX2_COMMON_H__
+#define __OCTEONTX2_COMMON_H__
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/** Maximum size of image supported for bootm (and bootable FIT images) */
+#define CONFIG_SYS_BOOTM_LEN (256 << 20)
+
+/** Memory base address */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE
+
+/** Stack starting address */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xffff0)
+
+/** Heap size for U-Boot */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_LAST_STAGE_INIT
+
+/* Allow environment variable to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/** Reduce hashes printed out */
+#define CONFIG_TFTP_TSIZE
+
+/* Autoboot options */
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_BOOT_RETRY_MIN 30
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/** Extra environment settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=20080000\0" \
+ "ethrotate=yes\0" \
+ "autoload=0\0"
+
+/** Environment defines */
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MAXARGS 64 /** max command args */
+
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT env_get("prompt")
+
+#if defined(CONFIG_MMC_OCTEONTX)
+#define MMC_SUPPORTS_TUNING
+/** EMMC specific defines */
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_SUPPORT_EMMC_RPMB
+#endif
+
+#endif /* __OCTEONTX2_COMMON_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __OCTEONTX_COMMON_H__
+#define __OCTEONTX_COMMON_H__
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/** Maximum size of image supported for bootm (and bootable FIT images) */
+#define CONFIG_SYS_BOOTM_LEN (256 << 20)
+
+/** Memory base address */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE
+
+/** Stack starting address */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xffff0)
+
+/** Heap size for U-Boot */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
+
+/* Allow environment variable to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/** Reduce hashes printed out */
+#define CONFIG_TFTP_TSIZE
+
+/* Autoboot options */
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_BOOT_RETRY_MIN 30
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* AHCI support Definitions */
+#ifdef CONFIG_DM_SCSI
+/** Enable 48-bit SATA addressing */
+# define CONFIG_LBA48
+/** Enable 64-bit addressing */
+# define CONFIG_SYS_64BIT_LBA
+#endif
+
+/***** SPI Defines *********/
+#ifdef CONFIG_DM_SPI_FLASH
+# define CONFIG_SF_DEFAULT_BUS 0
+# define CONFIG_SF_DEFAULT_CS 0
+#endif
+
+/** Extra environment settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=20080000\0" \
+ "autoload=0\0"
+
+/** Environment defines */
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MAXARGS 64 /** max command args */
+
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT env_get("prompt")
+
+/** EMMC specific defines */
+#if defined(CONFIG_MMC_OCTEONTX)
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_SUPPORT_EMMC_RPMB
+#endif
+
+#if defined(CONFIG_NAND_OCTEONTX)
+/*#define CONFIG_MTD_CONCAT */
+#define CONFIG_SYS_MAX_NAND_DEVICE 8
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+#endif /* __OCTEONTX_COMMON_H__ */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_SPLASH_SOURCE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_BMP_16BPP
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-
#ifdef CONFIG_VIDEO_LOGO
#ifdef CONFIG_DM_VIDEO
#endif
#ifdef CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SOURCE 1
-#define CONFIG_SPLASH_SCREEN_ALIGN 1
#define SPLASH_FILE logo.bmp
#endif
#define LCD_BPP LCD_COLOR16
#define CONFIG_LCD_BMP_RLE8
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_KEYBOARD
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#define CONFIG_NETCONSOLE
#endif
/* The rest of the configuration is shared */
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#endif
#endif /* __CONFIG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Total Compute platform. Parts were derived from other ARM
+ * configurations.
+ * (C) Copyright 2020 Arm Limited
+ * Usama Arif <usama.arif@arm.com>
+ */
+
+#ifndef __TOTAL_COMPUTE_H
+#define __TOTAL_COMPUTE_H
+
+#define CONFIG_REMAKE_ELF
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20)
+
+#define UART0_BASE 0x7ff80000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_CLOCK 7372800
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR 0x90000000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM_1 0x80000000
+/* Top 48MB reserved for secure world use */
+#define DRAM_SEC_SIZE 0x03000000
+#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#define CONFIG_ARM_PL180_MMCI_BASE 0x001c050000
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 12000000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x20000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x80080000\0" \
+ "initrd_addr_r=0x88000000\0" \
+ "fdt_addr_r=0x83000000\0"
+/*
+ * If vbmeta partition is present, boot Android with verification using AVB.
+ * Else if system partition is present (no vbmeta partition), boot Android
+ * without verification (for development purposes).
+ * Else boot FIT image.
+ */
+#define CONFIG_BOOTCOMMAND \
+ "if part number mmc 0 vbmeta is_avb; then" \
+ " echo MMC with vbmeta partition detected.;" \
+ " echo starting Android Verified boot.;" \
+ " avb init 0; " \
+ " if avb verify; then " \
+ " set bootargs $bootargs $avb_bootargs; " \
+ " part start mmc 0 boot boot_start; " \
+ " part size mmc 0 boot boot_size; " \
+ " mmc read ${load_addr} ${boot_start} ${boot_size}; " \
+ " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \
+ " else; " \
+ " echo AVB verification failed.; " \
+ " exit; " \
+ " fi; " \
+ "elif part number mmc 0 system is_non_avb_android; then " \
+ " booti ${kernel_addr_r} ${initrd_addr_r} ${fdt_addr_r};" \
+ "else;" \
+ " echo Booting FIT image.;" \
+ " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \
+ "fi;"
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#define CONFIG_SYS_FLASH_BASE 0x0C000000
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define FLASH_MAX_SECTOR_SIZE 0x00040000
+
+#endif /* __TOTAL_COMPUTE_H */
/* U-Boot - Common settings for UniPhier Family */
-#ifndef __CONFIG_UNIPHIER_COMMON_H__
-#define __CONFIG_UNIPHIER_COMMON_H__
+#ifndef __CONFIG_UNIPHIER_H__
+#define __CONFIG_UNIPHIER_H__
#ifndef CONFIG_SPL_BUILD
#include <config_distro_bootcmd.h>
#define CONFIG_SPL_PAD_TO 0x20000
-#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
+#endif /* __CONFIG_UNIPHIER_H__ */
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#include <linux/types.h>
#endif
-#define CONFIG_BOARD_EARLY_INIT_F
-
#define CONFIG_EXTRA_ENV_SETTINGS
#undef CONFIG_NR_DRAM_BANKS
#define CONFIG_OF_SYSTEM_SETUP
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_CMD_RUN
-
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#define CONFIG_NETCONSOLE
#endif
/* The rest of the configuration is shared */
#define DFU_ALT_INFO_RAM \
"dfu_ram_info=" \
"setenv dfu_alt_info " \
- "Image ram $kernel_addr_r $kernel_size_r\\\\;" \
+ "Image ram 80000 $kernel_size_r\\\\;" \
"system.dtb ram $fdt_addr_r $fdt_size_r\0" \
"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
#define CONFIG_CLOCKS
#define ENV_MEM_LAYOUT_SETTINGS \
- "fdt_high=10000000\0" \
"fdt_addr_r=0x40000000\0" \
"fdt_size_r=0x400000\0" \
"pxefile_addr_r=0x10000000\0" \
#define DFU_ALT_INFO_RAM \
"dfu_ram_info=" \
"setenv dfu_alt_info " \
- "Image ram $kernel_addr $kernel_size\\\\;" \
- "system.dtb ram $fdt_addr $fdt_size\0" \
+ "Image ram 80000 $kernel_size_r\\\\;" \
+ "system.dtb ram $fdt_addr_r $fdt_size_r\0" \
"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
- "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" \
+ "dfu_ram_tftp=run dfu_ram_info && setenv updatefile boot && " \
+ "setenv loadaddr 10000000 && dfu tftp ram 0\0"
#define DFU_ALT_INFO \
DFU_ALT_INFO_RAM
#define CONFIG_CLOCKS
#define ENV_MEM_LAYOUT_SETTINGS \
- "fdt_high=10000000\0" \
"fdt_addr_r=0x40000000\0" \
+ "fdt_size_r=0x400000\0" \
"pxefile_addr_r=0x10000000\0" \
"kernel_addr_r=0x18000000\0" \
+ "kernel_size_r=0x10000000\0" \
"scriptaddr=0x20000000\0" \
"ramdisk_addr_r=0x02100000\0" \
"script_size_f=0x80000\0" \
#include <configs/xilinx_zynqmp_mini.h>
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x20000)
-#define CONFIG_SYS_MALLOC_LEN 0x2000
+#define CONFIG_SYS_MALLOC_LEN 0x1a00
#endif /* __CONFIG_ZYNQMP_MINI_QSPI_H */
/* Default environment */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_high=0x20000000\0" \
"scriptaddr=0x20000\0" \
"script_size_f=0x40000\0" \
"fdt_addr_r=0x1f00000\0" \
*/
int dev_get_child_count(const struct udevice *dev);
+/**
+ * dev_read_pci_bus_range - Read PCI bus-range resource
+ *
+ * Look at the bus range property of a device node and return the pci bus
+ * range for this node.
+ *
+ * @dev: device to examine
+ * @res returns the resource
+ * @return 0 if ok, negative on error
+ */
+int dev_read_pci_bus_range(const struct udevice *dev, struct resource *res);
+
#else /* CONFIG_DM_DEV_READ_INLINE is enabled */
static inline int dev_read_u32(const struct udevice *dev,
static inline void *dev_read_addr_ptr(const struct udevice *dev)
{
- void *addr = devfdt_get_addr_ptr(dev);
-
- return ((fdt_addr_t)(uintptr_t)addr == FDT_ADDR_T_NONE) ? NULL : addr;
+ return devfdt_get_addr_ptr(dev);
}
static inline fdt_addr_t dev_read_addr_pci(const struct udevice *dev)
static inline int dev_read_addr_cells(const struct udevice *dev)
{
- /* NOTE: this call should walk up the parent stack */
- return fdt_address_cells(gd->fdt_blob, dev_of_offset(dev));
+ int parent = fdt_parent_offset(gd->fdt_blob, dev_of_offset(dev));
+
+ return fdt_address_cells(gd->fdt_blob, parent);
}
static inline int dev_read_size_cells(const struct udevice *dev)
{
- /* NOTE: this call should walk up the parent stack */
- return fdt_size_cells(gd->fdt_blob, dev_of_offset(dev));
+ int parent = fdt_parent_offset(gd->fdt_blob, dev_of_offset(dev));
+
+ return fdt_size_cells(gd->fdt_blob, parent);
}
static inline int dev_read_simple_addr_cells(const struct udevice *dev)
#ifndef _DT_BINDINGS_MTK_RESET_H_
#define _DT_BINDINGS_MTK_RESET_H_
-/* PCIe Subsystem resets */
+/* PCIe/SATA Subsystem resets */
+#define MT7622_SATA_PHY_REG_RST 12
+#define MT7622_SATA_PHY_SW_RST 13
+#define MT7622_SATA_AXI_BUS_RST 15
#define PCIE1_CORE_RST 19
#define PCIE1_MMIO_RST 20
#define PCIE1_HRST 21
const char *path,
struct efi_device_path **device,
struct efi_device_path **file);
+ssize_t efi_dp_check_length(const struct efi_device_path *dp,
+ const size_t maxlen);
#define EFI_DP_TYPE(_dp, _type, _subtype) \
(((_dp)->type == DEVICE_PATH_TYPE_##_type) && \
* @data: buffer to which the variable value is copied
* @timep: authentication time (seconds since start of epoch)
* Return: status code
-
*/
efi_status_t __efi_runtime
efi_get_variable_mem(u16 *variable_name, const efi_guid_t *vendor, u32 *attributes,
u32 *bar);
/**
+ * Look at the bus range property of a device node and return the pci bus
+ * range for this node.
+ * The property must hold one fdt_pci_addr with a length.
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param res the resource structure to return the bus range
+ * @return 0 if ok, negative on error
+ */
+
+int fdtdec_get_pci_bus_range(const void *blob, int node,
+ struct fdt_resource *res);
+
+/**
* Look up a 32-bit integer property in a node and return it. The property
* must have at least 4 bytes of data. The value of the first cell is
* returned.
int fdtdec_setup_mem_size_base(void);
/**
+ * fdtdec_setup_mem_size_base_lowest() - decode and setup gd->ram_size and
+ * gd->ram_start by lowest available memory base
+ *
+ * Decode the /memory 'reg' property to determine the lowest start of the memory
+ * bank bank and populate the global data with it.
+ *
+ * This function should be called from a boards dram_init(). This helper
+ * function allows for boards to query the device tree for DRAM size and start
+ * address instead of hard coding the value in the case where the memory size
+ * and start address cannot be detected automatically.
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_mem_size_base_lowest(void);
+
+/**
* fdtdec_setup_memory_banksize() - decode and populate gd->bd->bi_dram
*
* Decode the /memory 'reg' property to determine the address and size of the
#include <clk.h>
#include <test/export.h>
+#include <asm/io.h>
#define K210_PLL_CLKR GENMASK(3, 0)
#define K210_PLL_CLKF GENMASK(9, 4)
#ifdef CONFIG_UNIT_TEST
TEST_STATIC int k210_pll_calc_config(u32 rate, u32 rate_in,
struct k210_pll_config *best);
+
+#ifndef nop
#define nop()
#endif
+#endif
+
extern const struct clk_ops k210_pll_ops;
struct clk *k210_register_pll_struct(const char *name, const char *parent_name,
#ifndef SIZE_MAX
#define SIZE_MAX (~(size_t)0)
#endif
+#ifndef SSIZE_MAX
+#define SSIZE_MAX ((ssize_t)(SIZE_MAX >> 1))
+#endif
#define U8_MAX ((u8)~0U)
#define S8_MAX ((s8)(U8_MAX>>1))
#define PCI_EA_FIRST_ENT 4 /* First EA Entry in List */
#define PCI_EA_ES 0x00000007 /* Entry Size */
#define PCI_EA_BEI 0x000000f0 /* BAR Equivalent Indicator */
+/* 9-14 map to VF BARs 0-5 respectively */
+#define PCI_EA_BEI_VF_BAR0 9
+#define PCI_EA_BEI_VF_BAR5 14
/* Base, MaxOffset registers */
/* bit 0 is reserved */
#define PCI_EA_IS_64 0x00000002 /* 64-bit field flag */
#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+/* Single Root I/O Virtualization Registers */
+#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
+#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */
+#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */
+#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */
+#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */
+#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */
+#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */
+#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */
+#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */
+#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */
/* Include the ID list */
extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev,
struct pci_config_table *);
-#define MAX_PCI_REGIONS 7
-
#define INDIRECT_TYPE_NO_PCIE_LINK 1
/**
* for PCI controllers and a separate UCLASS (or perhaps
* UCLASS_PCI_GENERIC) is used for bridges.
*/
- struct pci_region regions[MAX_PCI_REGIONS];
+ struct pci_region *regions;
int region_count;
struct pci_config_table *config_table;
* @vendor: PCI vendor ID (see pci_ids.h)
* @device: PCI device ID (see pci_ids.h)
* @class: PCI class, 3 bytes: (base, sub, prog-if)
+ * @is_virtfn: True for Virtual Function device
+ * @pfdev: Handle to Physical Function device
+ * @virtid: Virtual Function Index
*/
struct pci_child_platdata {
int devfn;
unsigned short vendor;
unsigned short device;
unsigned int class;
+
+ /* Variables for CONFIG_PCI_SRIOV */
+ bool is_virtfn;
+ struct udevice *pfdev;
+ int virtid;
};
/* PCI bus operations */
ulong *valuep,
enum pci_size_t size);
+#if defined(CONFIG_PCI_SRIOV)
+/**
+ * pci_sriov_init() - Scan Virtual Function devices
+ *
+ * @pdev: Physical Function udevice handle
+ * @vf_en: Number of Virtual Function devices to enable
+ * @return 0 on success, -ve on error
+ */
+int pci_sriov_init(struct udevice *pdev, int vf_en);
+
+/**
+ * pci_sriov_get_totalvfs() - Get total available Virtual Function devices
+ *
+ * @pdev: Physical Function udevice handle
+ * @return count on success, -ve on error
+ */
+int pci_sriov_get_totalvfs(struct udevice *pdev);
+#endif
+
#ifdef CONFIG_DM_PCI_COMPAT
/* Compatibility with old naming */
static inline int pci_write_config_dword(pci_dev_t pcidev, int offset,
reg, shift, width, 0);
}
+static inline struct clk *sandbox_clk_gate(const char *name, const char *parent,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, bit_idx, clk_gate_flags, NULL);
+}
+
struct clk *sandbox_clk_register_gate2(struct device *dev, const char *name,
const char *parent_name,
unsigned long flags,
/*
* PROTOTYPES
*/
-int stdio_register (struct stdio_dev * dev);
+int stdio_register(struct stdio_dev *dev);
int stdio_register_dev(struct stdio_dev *dev, struct stdio_dev **devp);
/**
*/
int stdio_init(void);
-void stdio_print_current_devices(void);
-#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
+void stdio_print_current_devices(void);
int stdio_deregister(const char *devname, int force);
-int stdio_deregister_dev(struct stdio_dev *dev, int force);
-#endif
-struct list_head* stdio_get_list(void);
-struct stdio_dev* stdio_get_by_name(const char* name);
-struct stdio_dev* stdio_clone(struct stdio_dev *dev);
-#ifdef CONFIG_LCD
-int drv_lcd_init (void);
-#endif
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-int drv_video_init (void);
-#endif
-#ifdef CONFIG_KEYBOARD
-int drv_keyboard_init (void);
-#endif
-#ifdef CONFIG_USB_TTY
-int drv_usbtty_init (void);
-#endif
-#ifdef CONFIG_NETCONSOLE
-int drv_nc_init (void);
-#endif
-#ifdef CONFIG_JTAG_CONSOLE
-int drv_jtag_console_init (void);
-#endif
-#ifdef CONFIG_CBMEM_CONSOLE
+/**
+ * stdio_deregister_dev() - deregister the device "devname".
+ *
+ * @dev: Stdio device to deregister
+ * @force: true to force deregistration even if in use
+ *
+ * returns 0 on success, -EBUSY if device is assigned
+ */
+int stdio_deregister_dev(struct stdio_dev *dev, int force);
+struct list_head *stdio_get_list(void);
+struct stdio_dev *stdio_get_by_name(const char *name);
+struct stdio_dev *stdio_clone(struct stdio_dev *dev);
+
+int drv_lcd_init(void);
+int drv_video_init(void);
+int drv_keyboard_init(void);
+int drv_usbtty_init(void);
+int drv_nc_init(void);
+int drv_jtag_console_init(void);
int cbmemc_init(void);
-#endif
#endif
-/*
- * SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0
*
* (C) 2006, Steven Smith <sos22@cam.ac.uk>
* (C) 2006, Grzegorz Milos <gm281@cam.ac.uk>
PM_API_MAX,
};
+enum pm_query_id {
+ PM_QID_INVALID = 0,
+ PM_QID_CLOCK_GET_NAME = 1,
+ PM_QID_CLOCK_GET_TOPOLOGY = 2,
+ PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS = 3,
+ PM_QID_CLOCK_GET_PARENTS = 4,
+ PM_QID_CLOCK_GET_ATTRIBUTES = 5,
+ PM_QID_PINCTRL_GET_NUM_PINS = 6,
+ PM_QID_PINCTRL_GET_NUM_FUNCTIONS = 7,
+ PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS = 8,
+ PM_QID_PINCTRL_GET_FUNCTION_NAME = 9,
+ PM_QID_PINCTRL_GET_FUNCTION_GROUPS = 10,
+ PM_QID_PINCTRL_GET_PIN_GROUPS = 11,
+ PM_QID_CLOCK_GET_NUM_CLOCKS = 12,
+ PM_QID_CLOCK_GET_MAX_DIVISOR = 13,
+};
+
#define PM_SIP_SVC 0xc2000000
#define ZYNQMP_PM_VERSION_MAJOR 1
#define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0)
+/*
+ * Return payload size
+ * Not every firmware call expects the same amount of return bytes, however the
+ * firmware driver always copies 5 bytes from RX buffer to the ret_payload
+ * buffer. Therefore allocating with this defined value is recommended to avoid
+ * overflows.
+ */
+#define PAYLOAD_ARG_CNT 5U
+
unsigned int zynqmp_firmware_version(void);
void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size);
int xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
if (*size < len)
return EFI_INVALID_PARAMETER;
lo->file_path = (struct efi_device_path *)data;
- /*
- * TODO: validate device path. There should be an end node within
- * the indicated file_path_length.
- */
+ if (efi_dp_check_length(lo->file_path, len) < 0)
+ return EFI_INVALID_PARAMETER;
data += len;
*size -= len;
return EFI_SUCCESS;
}
+
+/**
+ * efi_dp_check_length() - check length of a device path
+ *
+ * @dp: pointer to device path
+ * @maxlen: maximum length of the device path
+ * Return:
+ * * length of the device path if it is less or equal @maxlen
+ * * -1 if the device path is longer then @maxlen
+ * * -1 if a device path node has a length of less than 4
+ * * -EINVAL if maxlen exceeds SSIZE_MAX
+ */
+ssize_t efi_dp_check_length(const struct efi_device_path *dp,
+ const size_t maxlen)
+{
+ ssize_t ret = 0;
+ u16 len;
+
+ if (maxlen > SSIZE_MAX)
+ return -EINVAL;
+ for (;;) {
+ len = dp->length;
+ if (len < 4)
+ return -1;
+ ret += len;
+ if (ret > maxlen)
+ return -1;
+ if (dp->type == DEVICE_PATH_TYPE_END &&
+ dp->sub_type == DEVICE_PATH_SUB_TYPE_END)
+ return ret;
+ dp = (const struct efi_device_path *)((const u8 *)dp + len);
+ }
+}
* efi_reset_system() - reset system
*
* This function implements the ResetSystem() runtime service after
- * SetVirtualAddressMap() is called. It only executes an endless loop.
+ * SetVirtualAddressMap() is called. As this placeholder cannot reset the
+ * system it simply return to the caller.
+ *
* Boards may override the helpers below to implement reset functionality.
*
* See the Unified Extensible Firmware Interface (UEFI) specification for
efi_status_t reset_status,
unsigned long data_size, void *reset_data)
{
- /* Nothing we can do */
- while (1) { }
+ return;
}
/**
efi_selftest_memory.o \
efi_selftest_open_protocol.o \
efi_selftest_register_notify.o \
+efi_selftest_reset.o \
efi_selftest_set_virtual_address_map.o \
efi_selftest_textinput.o \
efi_selftest_textinputex.o \
* Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
*/
+#include <command.h>
#include <efi_selftest.h>
#include <vsprintf.h>
/* Reset system */
efi_st_printf("Preparing for reset. Press any key...\n");
efi_st_get_key();
- runtime->reset_system(EFI_RESET_WARM, EFI_NOT_READY,
- sizeof(reset_message), reset_message);
+
+ if (IS_ENABLED(CONFIG_EFI_HAVE_RUNTIME_RESET))
+ runtime->reset_system(EFI_RESET_WARM, EFI_NOT_READY,
+ sizeof(reset_message), reset_message);
+ else
+ do_reset(NULL, 0, 0, NULL);
+
efi_st_printf("\n");
efi_st_error("Reset failed\n");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * efi_selftest_reset
+ *
+ * Copyright (c) 2020 Heinrich Schuchardt <xypron.glpk@gmx.de>
+ *
+ * This test checks the following service at boot time or runtime:
+ * ResetSystem()
+ */
+
+#include <efi_selftest.h>
+
+static struct efi_runtime_services *runtime;
+
+/*
+ * Setup unit test.
+ *
+ * @handle: handle of the loaded image
+ * @systable: system table
+ * @return: EFI_ST_SUCCESS for success
+ */
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ runtime = systable->runtime;
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Execute unit test.
+ *
+ * @return: EFI_ST_SUCCESS for success
+ */
+static int execute(void)
+{
+ u16 reset_data[] = L"Reset by selftest";
+
+ runtime->reset_system(EFI_RESET_COLD, EFI_SUCCESS,
+ sizeof(reset_data), reset_data);
+ efi_st_error("Reset failed.\n");
+ return EFI_ST_FAILURE;
+}
+
+EFI_UNIT_TEST(reset) = {
+ .name = "reset system",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .on_request = true,
+};
+
+EFI_UNIT_TEST(resetrt) = {
+ .name = "reset system runtime",
+ .phase = EFI_SETUP_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .on_request = true,
+};
#include <asm/sections.h>
#include <linux/ctype.h>
#include <linux/lzo.h>
+#include <linux/ioport.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+
+int fdtdec_get_pci_bus_range(const void *blob, int node,
+ struct fdt_resource *res)
+{
+ const u32 *values;
+ int len;
+
+ values = fdt_getprop(blob, node, "bus-range", &len);
+ if (!values || len < sizeof(*values) * 2)
+ return -EINVAL;
+
+ res->start = fdt32_to_cpu(*values++);
+ res->end = fdt32_to_cpu(*values);
+
+ return 0;
+}
#endif
uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
int fdtdec_setup_mem_size_base(void)
{
- int ret, mem;
- struct fdt_resource res;
+ int ret;
+ ofnode mem;
+ struct resource res;
- mem = fdt_path_offset(gd->fdt_blob, "/memory");
- if (mem < 0) {
+ mem = ofnode_path("/memory");
+ if (!ofnode_valid(mem)) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", 0, &res);
+ ret = ofnode_read_resource(mem, 0, &res);
if (ret != 0) {
debug("%s: Unable to decode first memory bank\n", __func__);
return -EINVAL;
#if defined(CONFIG_NR_DRAM_BANKS)
-static int get_next_memory_node(const void *blob, int mem)
+ofnode get_next_memory_node(ofnode mem)
{
do {
- mem = fdt_node_offset_by_prop_value(gd->fdt_blob, mem,
- "device_type", "memory", 7);
- } while (!fdtdec_get_is_enabled(blob, mem));
+ mem = ofnode_by_prop_value(mem, "device_type", "memory", 7);
+ } while (!ofnode_is_available(mem));
return mem;
}
int fdtdec_setup_memory_banksize(void)
{
- int bank, ret, mem, reg = 0;
- struct fdt_resource res;
+ int bank, ret, reg = 0;
+ struct resource res;
+ ofnode mem = ofnode_null();
- mem = get_next_memory_node(gd->fdt_blob, -1);
- if (mem < 0) {
+ mem = get_next_memory_node(mem);
+ if (!ofnode_valid(mem)) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res);
- if (ret == -FDT_ERR_NOTFOUND) {
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0) {
reg = 0;
- mem = get_next_memory_node(gd->fdt_blob, mem);
- if (mem == -FDT_ERR_NOTFOUND)
+ mem = get_next_memory_node(mem);
+ if (ofnode_valid(mem))
break;
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res);
- if (ret == -FDT_ERR_NOTFOUND)
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0)
break;
}
- if (ret != 0) {
+
+ if (ret != 0)
return -EINVAL;
- }
gd->bd->bi_dram[bank].start = (phys_addr_t)res.start;
gd->bd->bi_dram[bank].size =
return 0;
}
+
+int fdtdec_setup_mem_size_base_lowest(void)
+{
+ int bank, ret, reg = 0;
+ struct resource res;
+ unsigned long base;
+ phys_size_t size;
+ ofnode mem = ofnode_null();
+
+ gd->ram_base = (unsigned long)~0;
+
+ mem = get_next_memory_node(mem);
+ if (!ofnode_valid(mem)) {
+ debug("%s: Missing /memory node\n", __func__);
+ return -EINVAL;
+ }
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0) {
+ reg = 0;
+ mem = get_next_memory_node(mem);
+ if (ofnode_valid(mem))
+ break;
+
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0)
+ break;
+ }
+
+ if (ret != 0)
+ return -EINVAL;
+
+ base = (unsigned long)res.start;
+ size = (phys_size_t)(res.end - res.start + 1);
+
+ if (gd->ram_base > base && size) {
+ gd->ram_base = base;
+ gd->ram_size = size;
+ debug("%s: Initial DRAM base %lx size %lx\n",
+ __func__, base, (unsigned long)size);
+ }
+ }
+
+ return 0;
+}
#endif
#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
if (flags & SUPPRESS) {
size_t sum = 0;
- if ((n = inr) < width) {
+ n = inr;
+ if (n < width) {
sum += n;
width -= n;
inp += n;
CONFIG_SPI_IDLE_VAL
CONFIG_SPI_LENGTH
CONFIG_SPI_N25Q256A_RESET
-CONFIG_SPLASHIMAGE_GUARD
-CONFIG_SPLASH_SCREEN
-CONFIG_SPLASH_SCREEN_ALIGN
-CONFIG_SPLASH_SOURCE
CONFIG_SPLL_FREQ
CONFIG_SPL_
CONFIG_SPL_ATMEL_SIZE
CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
CONFIG_SYS_DEFAULT_VIDEO_MODE
CONFIG_SYS_DEF_EEPROM_ADDR
-CONFIG_SYS_DEVICE_NULLDEV
CONFIG_SYS_DFU_DATA_BUF_SIZE
CONFIG_SYS_DFU_MAX_FILE_SIZE
CONFIG_SYS_DIAG_ADDR
ut_assertok(dm_bootcount_get(dev, &val));
ut_assert(val == 0xab);
+ ut_assertok(uclass_get_device(UCLASS_BOOTCOUNT, 1, &dev));
+ ut_assertok(dm_bootcount_set(dev, 0));
+ ut_assertok(dm_bootcount_get(dev, &val));
+ ut_assert(val == 0);
+ ut_assertok(dm_bootcount_set(dev, 0xab));
+ ut_assertok(dm_bootcount_get(dev, &val));
+ ut_assert(val == 0xab);
+
return 0;
}
ret = clk_get_by_id(SANDBOX_CLK_ECSPI_ROOT, &clk);
ut_assertok(ret);
ut_asserteq_str("ecspi_root", clk->dev->name);
+ ut_asserteq(CLK_SET_RATE_PARENT, clk->flags);
/* Test for clk_get_parent_rate() */
ret = clk_get_by_id(SANDBOX_CLK_ECSPI1, &clk);
ut_assertok(ret);
ut_asserteq_str("ecspi1", clk->dev->name);
+ ut_asserteq(CLK_SET_RATE_PARENT, clk->flags);
+
+ rate = clk_get_parent_rate(clk);
+ ut_asserteq(rate, 20000000);
+
+ /* test the gate of CCF */
+ ret = clk_get_by_id(SANDBOX_CLK_ECSPI0, &clk);
+ ut_assertok(ret);
+ ut_asserteq_str("ecspi0", clk->dev->name);
+ ut_asserteq(CLK_SET_RATE_PARENT, clk->flags);
rate = clk_get_parent_rate(clk);
ut_asserteq(rate, 20000000);
ret = clk_get_by_id(SANDBOX_CLK_USDHC1_SEL, &clk);
ut_assertok(ret);
ut_asserteq_str("usdhc1_sel", clk->dev->name);
+ ut_asserteq(CLK_SET_RATE_NO_REPARENT, clk->flags);
rate = clk_get_parent_rate(clk);
ut_asserteq(rate, 60000000);
+ rate = clk_get_rate(clk);
+ ut_asserteq(rate, 60000000);
+
+ ret = clk_get_by_id(SANDBOX_CLK_PLL3_80M, &pclk);
+ ut_assertok(ret);
+
+ ret = clk_set_parent(clk, pclk);
+ ut_assertok(ret);
+
+ rate = clk_get_rate(clk);
+ ut_asserteq(rate, 80000000);
+
ret = clk_get_by_id(SANDBOX_CLK_USDHC2_SEL, &clk);
ut_assertok(ret);
ut_asserteq_str("usdhc2_sel", clk->dev->name);
+ ut_asserteq(CLK_SET_RATE_NO_REPARENT, clk->flags);
rate = clk_get_parent_rate(clk);
ut_asserteq(rate, 80000000);
pclk = clk_get_parent(clk);
ut_asserteq_str("pll3_80m", pclk->dev->name);
+ ut_asserteq(CLK_SET_RATE_PARENT, pclk->flags);
+
+ rate = clk_get_rate(clk);
+ ut_asserteq(rate, 80000000);
+
+ ret = clk_get_by_id(SANDBOX_CLK_PLL3_60M, &pclk);
+ ut_assertok(ret);
+
+ ret = clk_set_parent(clk, pclk);
+ ut_assertok(ret);
+
+ rate = clk_get_rate(clk);
+ ut_asserteq(rate, 60000000);
/* Test the composite of CCF */
ret = clk_get_by_id(SANDBOX_CLK_I2C, &clk);
ut_assertok(ret);
ut_asserteq_str("i2c", clk->dev->name);
+ ut_asserteq(CLK_SET_RATE_UNGATE, clk->flags);
rate = clk_get_rate(clk);
ut_asserteq(rate, 60000000);
return 0;
}
DM_TEST(dm_test_pci_on_bus, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/*
+ * Test support for multiple memory regions enabled via
+ * CONFIG_PCI_REGION_MULTI_ENTRY. When this feature is not enabled,
+ * only the last region of one type is stored. In this test-case,
+ * we have 2 memory regions, the first at 0x3000.0000 and the 2nd
+ * at 0x3100.0000. A correct test results now in BAR1 located at
+ * 0x3000.0000.
+ */
+static int dm_test_pci_region_multi(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+ ulong mem_addr;
+
+ /* Test memory BAR1 on bus#1 */
+ ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &dev));
+ mem_addr = dm_pci_read_bar32(dev, 1);
+ ut_asserteq(mem_addr, 0x30000000);
+
+ return 0;
+}
+DM_TEST(dm_test_pci_region_multi, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
ut_assert(phy2.dev != phy3.dev);
/* Try to get a non-existing phy */
- ut_asserteq(-ENODEV, uclass_get_device(UCLASS_PHY, 3, &dev));
+ ut_asserteq(-ENODEV, uclass_get_device(UCLASS_PHY, 4, &dev));
ut_asserteq(-ENODATA, generic_phy_get_by_name(parent,
"phy_not_existing", &phy1_method1));
}
DM_TEST(dm_test_fdt_translation, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+static int dm_test_fdt_get_addr_ptr_flat(struct unit_test_state *uts)
+{
+ struct udevice *gpio, *dev;
+ void *ptr;
+
+ /* Test for missing reg property */
+ ut_assertok(uclass_first_device_err(UCLASS_GPIO, &gpio));
+ ut_assertnull(devfdt_get_addr_ptr(gpio));
+
+ ut_assertok(uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 0, true, &dev));
+ ptr = devfdt_get_addr_ptr(dev);
+ ut_asserteq_ptr((void *)0x8000, ptr);
+
+ return 0;
+}
+DM_TEST(dm_test_fdt_get_addr_ptr_flat,
+ UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT | UT_TESTF_FLAT_TREE);
+
static int dm_test_fdt_remap_addr_flat(struct unit_test_state *uts)
{
struct udevice *dev;
# (C) Copyright 2018
# Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
obj-y += cmd_ut_lib.o
+obj-$(CONFIG_EFI_LOADER) += efi_device_path.o
obj-$(CONFIG_EFI_SECURE_BOOT) += efi_image_region.o
obj-y += hexdump.o
obj-y += lmb.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test device path functions
+ *
+ * Copyright (c) 2020 Heinrich Schuchardt <xypron.glpk@gmx.de>
+ */
+
+#include <common.h>
+#include <efi_loader.h>
+#include <test/lib.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+static int lib_test_efi_dp_check_length(struct unit_test_state *uts)
+{
+ /* end of device path */
+ u8 d1[] __aligned(2) = {
+ 0x7f, 0xff, 0x04, 0x00 };
+ /* device path node with length less then 4 */
+ u8 d2[] __aligned(2) = {
+ 0x01, 0x02, 0x02, 0x00, 0x04, 0x00, 0x7f, 0xff, 0x04, 0x00 };
+ /* well formed device path */
+ u8 d3[] __aligned(2) = {
+ 0x03, 0x02, 0x08, 0x00, 0x01, 0x00, 0x01, 0x00,
+ 0x7f, 0xff, 0x04, 0x00 };
+
+ struct efi_device_path *p1 = (struct efi_device_path *)d1;
+ struct efi_device_path *p2 = (struct efi_device_path *)d2;
+ struct efi_device_path *p3 = (struct efi_device_path *)d3;
+
+ ut_asserteq((ssize_t)-EINVAL, efi_dp_check_length(p1, SIZE_MAX));
+ ut_asserteq((ssize_t)sizeof(d1), efi_dp_check_length(p1, sizeof(d1)));
+ ut_asserteq((ssize_t)sizeof(d1),
+ efi_dp_check_length(p1, sizeof(d1) + 4));
+ ut_asserteq((ssize_t)-1, efi_dp_check_length(p1, sizeof(d1) - 1));
+
+ ut_asserteq((ssize_t)-1, efi_dp_check_length(p2, sizeof(d2)));
+
+ ut_asserteq((ssize_t)-1, efi_dp_check_length(p3, sizeof(d3) - 1));
+ ut_asserteq((ssize_t)sizeof(d3), efi_dp_check_length(p3, sizeof(d3)));
+ ut_asserteq((ssize_t)sizeof(d3), efi_dp_check_length(p3, SSIZE_MAX));
+ ut_asserteq((ssize_t)-EINVAL,
+ efi_dp_check_length(p3, (size_t)SSIZE_MAX + 1));
+ ut_asserteq((ssize_t)sizeof(d3),
+ efi_dp_check_length(p3, sizeof(d3) + 4));
+
+ return 0;
+}
+
+LIB_TEST(lib_test_efi_dp_check_length, 0);
def in_tree(response, name, uclass, drv, depth, last_child):
lines = [x.strip() for x in response.splitlines()]
- leaf = ' ' * 4 * depth;
- if not last_child:
- leaf = leaf + r'\|'
- else:
- leaf = leaf + '`'
+ leaf = ''
+ if depth != 0:
+ leaf = ' ' + ' ' * (depth - 1) ;
+ if not last_child:
+ leaf = leaf + r'\|'
+ else:
+ leaf = leaf + '`'
+
leaf = leaf + '-- ' + name
- line = (r' *{:10.10} [0-9]* \[ [ +] \] {:20.20} {}$'
+ line = (r' *{:10.10} [0-9]* \[ [ +] \] {:20.20} [` |]{}$'
.format(uclass, drv, leaf))
prog = re.compile(line)
for l in lines:
@pytest.mark.buildconfigspec('cmd_bind')
def test_bind_unbind_with_node(u_boot_console):
- #bind /bind-test. Device should come up as well as its children
- response = u_boot_console.run_command('bind /bind-test simple_bus')
- assert response == ''
tree = u_boot_console.run_command('dm tree')
assert in_tree(tree, 'bind-test', 'simple_bus', 'simple_bus', 0, True)
assert in_tree(tree, 'bind-test-child1', 'phy', 'phy_sandbox', 1, False)
# Test Case 1b, PK without AUTHENTICATED_WRITE_ACCESS
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' in ''.join(output)
with u_boot_console.log.section('Test Case 1c'):
# Test Case 1c, install PK
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'printenv -e -n PK'])
assert 'PK:' in ''.join(output)
# Test Case 1d, db/dbx without KEK
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx'])
assert 'Failed to set EFI variable' in ''.join(output)
with u_boot_console.log.section('Test Case 1e'):
# Test Case 1e, install KEK
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -i 4000000,$filesize KEK'])
+ 'setenv -e -nv -bs -rt -i 4000000:$filesize KEK'])
assert 'Failed to set EFI variable' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'printenv -e -n KEK'])
assert 'KEK:' in ''.join(output)
# Test Case 1f, install db
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'db:' in ''.join(output)
# Test Case 1g, install dbx
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 dbx.auth',
- 'setenv -e -nv -bs -rt -i 4000000,$filesize dbx'])
+ 'setenv -e -nv -bs -rt -i 4000000:$filesize dbx'])
assert 'Failed to set EFI variable' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 dbx.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f dbx'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'dbx:' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'db:' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db1.auth',
- 'setenv -e -nv -bs -rt -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' in ''.join(output)
with u_boot_console.log.section('Test Case 2b'):
# Test Case 2b, update without correct signature
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.esl',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' in ''.join(output)
with u_boot_console.log.section('Test Case 2c'):
# Test Case 2c, update with correct signature
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db1.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'db:' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'db:' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db1.auth',
- 'setenv -e -nv -bs -rt -a -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -a -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' in ''.join(output)
with u_boot_console.log.section('Test Case 3b'):
# Test Case 3b, update without correct signature
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.esl',
- 'setenv -e -nv -bs -rt -at -a -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -a -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' in ''.join(output)
with u_boot_console.log.section('Test Case 3c'):
# Test Case 3c, update with correct signature
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db1.auth',
- 'setenv -e -nv -bs -rt -at -a -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -a -i 4000000:$filesize db',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'db:' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'printenv -e -n -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'db:' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'printenv -e -n PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert 'PK:' in ''.join(output)
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 PK_null.esl',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'printenv -e -n PK'])
assert 'Failed to set EFI variable' in ''.join(output)
assert 'PK:' in ''.join(output)
# Test Case 5b, Uninstall PK with correct signature
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 PK_null.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK',
'printenv -e -n PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
assert '\"PK\" not defined' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot add 1 HELLO1 host 0:1 /helloworld.efi.signed ""',
# Test Case 2b, authenticated by db
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 2',
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot add 1 HELLO host 0:1 /helloworld.efi.signed ""',
# Test Case 3b, rejected by dbx even if db allows
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 1',
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 dbx_hash.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx',
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot add 1 HELLO host 0:1 /helloworld.efi.signed ""',
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot add 1 HELLO host 0:1 /helloworld.efi.signed_2sigs ""',
# Test Case 5b, authenticated if both signatures are verified
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db1.auth',
- 'setenv -e -nv -bs -rt -at -a -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -a -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 1',
# certificate) is revoked
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 dbx_hash.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 1',
# Test Case 5d, rejected if both of signatures are revoked
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 dbx_hash1.auth',
- 'setenv -e -nv -bs -rt -at -a -i 4000000,$filesize dbx'])
+ 'setenv -e -nv -bs -rt -at -a -i 4000000:$filesize dbx'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 1',
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 db_hello_signed.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot add 1 HELLO host 0:1 /helloworld.efi.signed ""',
# Test Case 6b, rejected by TEST_db certificate in dbx
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 dbx_db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 1',
# Test Case 6c, rejected by image's digest in dbx
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 dbx_hello_signed.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
'efidebug boot next 1',
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 db_c.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
# Test Case 2b, signed and authenticated by root CA
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db_b.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'efidebug boot next 1',
'efidebug test bootmgr'])
assert '\'HELLO_abc\' failed' in ''.join(output)
# Test Case 2c, signed and authenticated by root CA
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db_c.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'efidebug boot next 1',
'efidebug test bootmgr'])
assert 'Hello, world!' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 dbx_b.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx',
'fatload host 0:1 4000000 db_c.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
# Test Case 3b, revoked by root CA in dbx
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 dbx_c.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx',
'efidebug boot next 1',
'efidebug test bootmgr'])
assert '\'HELLO_abc\' failed' in ''.join(output)
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 db_hello.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
output = u_boot_console.run_command_list([
'host bind 0 %s' % disk_img,
'fatload host 0:1 4000000 db_hello.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx',
'fatload host 0:1 4000000 KEK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize KEK',
'fatload host 0:1 4000000 PK.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
# Test Case 3b, rejected by dbx even if db allows
output = u_boot_console.run_command_list([
'fatload host 0:1 4000000 db_hello.auth',
- 'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
+ 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db'])
assert 'Failed to set EFI variable' not in ''.join(output)
output = u_boot_console.run_command_list([
import os
import random
import string
+import subprocess
def sqfs_get_random_letters(size):
letters = []
file.write(content)
file.close()
-# generate image with three files and a symbolic link
-def sqfs_generate_image(cons):
- src = os.path.join(cons.config.build_dir, "sqfs_src/")
- dest = os.path.join(cons.config.build_dir, "sqfs")
- os.mkdir(src)
- sqfs_generate_file(src + "frag_only", 100)
- sqfs_generate_file(src + "blks_frag", 5100)
- sqfs_generate_file(src + "blks_only", 4096)
- os.symlink("frag_only", src + "sym")
- os.system("mksquashfs " + src + " " + dest + " -b 4096 -always-use-fragments")
-
-# removes all files created by sqfs_generate_image()
-def sqfs_clean(cons):
- src = os.path.join(cons.config.build_dir, "sqfs_src/")
- dest = os.path.join(cons.config.build_dir, "sqfs")
- os.remove(src + "frag_only")
- os.remove(src + "blks_frag")
- os.remove(src + "blks_only")
- os.remove(src + "sym")
- os.rmdir(src)
- os.remove(dest)
+class Compression:
+ def __init__(self, name, files, sizes, block_size = 4096):
+ self.name = name
+ self.files = files
+ self.sizes = sizes
+ self.mksquashfs_opts = " -b " + str(block_size) + " -comp " + self.name
+
+ def add_opt(self, opt):
+ self.mksquashfs_opts += " " + opt
+
+ def gen_image(self, build_dir):
+ src = os.path.join(build_dir, "sqfs_src/")
+ os.mkdir(src)
+ for (f, s) in zip(self.files, self.sizes):
+ sqfs_generate_file(src + f, s)
+
+ # the symbolic link always targets the first file
+ os.symlink(self.files[0], src + "sym")
+
+ sqfs_img = os.path.join(build_dir, "sqfs-" + self.name)
+ i_o = src + " " + sqfs_img
+ opts = self.mksquashfs_opts
+ try:
+ subprocess.run(["mksquashfs " + i_o + opts], shell = True, check = True)
+ except:
+ print("mksquashfs error. Compression type: " + self.name)
+ raise RuntimeError
+
+ def clean_source(self, build_dir):
+ src = os.path.join(build_dir, "sqfs_src/")
+ for f in self.files:
+ os.remove(src + f)
+ os.remove(src + "sym")
+ os.rmdir(src)
+
+ def cleanup(self, build_dir):
+ self.clean_source(build_dir)
+ sqfs_img = os.path.join(build_dir, "sqfs-" + self.name)
+ os.remove(sqfs_img)
+
+files = ["blks_only", "blks_frag", "frag_only"]
+sizes = [4096, 5100, 100]
+gzip = Compression("gzip", files, sizes)
+zstd = Compression("zstd", files, sizes)
+lzo = Compression("lzo", files, sizes)
+
+# use fragment blocks for files larger than block_size
+gzip.add_opt("-always-use-fragments")
+zstd.add_opt("-always-use-fragments")
+
+# avoid fragments if lzo is used
+lzo.add_opt("-no-fragments")
+
+comp_opts = [gzip, zstd, lzo]
@pytest.mark.buildconfigspec('fs_squashfs')
@pytest.mark.requiredtool('mksquashfs')
def test_sqfs_load(u_boot_console):
- cons = u_boot_console
- sqfs_generate_image(cons)
+ build_dir = u_boot_console.config.build_dir
command = "sqfsload host 0 $kernel_addr_r "
- path = os.path.join(cons.config.build_dir, "sqfs")
- try:
+ for opt in comp_opts:
+ # generate and load the squashfs image
+ try:
+ opt.gen_image(build_dir)
+ except RuntimeError:
+ opt.clean_source(build_dir)
+ # skip unsupported compression types
+ continue
+
+ path = os.path.join(build_dir, "sqfs-" + opt.name)
output = u_boot_console.run_command("host bind 0 " + path)
+
output = u_boot_console.run_command(command + "xxx")
assert "File not found." in output
- output = u_boot_console.run_command(command + "frag_only")
- assert "100 bytes read in" in output
- output = u_boot_console.run_command(command + "blks_frag")
- assert "5100 bytes read in" in output
- output = u_boot_console.run_command(command + "blks_only")
- assert "4096 bytes read in" in output
+
+ for (f, s) in zip(opt.files, opt.sizes):
+ try:
+ output = u_boot_console.run_command(command + f)
+ assert str(s) in output
+ except:
+ assert False
+ opt.cleanup(build_dir)
+
+ # test symbolic link
output = u_boot_console.run_command(command + "sym")
- assert "100 bytes read in" in output
- except:
- sqfs_clean(cons)
- sqfs_clean(cons)
+ assert str(opt.sizes[0]) in output
+
+ # remove generated files
+ opt.cleanup(build_dir)
@pytest.mark.buildconfigspec('fs_squashfs')
@pytest.mark.requiredtool('mksquashfs')
def test_sqfs_ls(u_boot_console):
- cons = u_boot_console
- sqfs_generate_image(cons)
- path = os.path.join(cons.config.build_dir, "sqfs")
- try:
+ build_dir = u_boot_console.config.build_dir
+ for opt in comp_opts:
+ try:
+ opt.gen_image(build_dir)
+ except RuntimeError:
+ opt.clean_source(build_dir)
+ # skip unsupported compression types
+ continue
+ path = os.path.join(build_dir, "sqfs-" + opt.name)
output = u_boot_console.run_command("host bind 0 " + path)
- output = u_boot_console.run_command("sqfsls host 0")
- assert "4 file(s), 0 dir(s)" in output
- assert "<SYM> sym" in output
- output = u_boot_console.run_command("sqfsls host 0 xxx")
- assert "** Cannot find directory. **" in output
- except:
- sqfs_clean(cons)
- sqfs_clean(cons)
+
+ try:
+ # list files in root directory
+ output = u_boot_console.run_command("sqfsls host 0")
+ assert str(len(opt.files) + 1) + " file(s), 0 dir(s)" in output
+ assert "<SYM> sym" in output
+ output = u_boot_console.run_command("sqfsls host 0 xxx")
+ assert "** Cannot find directory. **" in output
+ except:
+ opt.cleanup(build_dir)
+ assert False
+ opt.cleanup(build_dir)
#
from collections import OrderedDict
+import glob
import os
import sys
from patman import tools
return node
return None
+def GetEntryModules(include_testing=True):
+ """Get a set of entry class implementations
+
+ Returns:
+ Set of paths to entry class filenames
+ """
+ our_path = os.path.dirname(os.path.realpath(__file__))
+ glob_list = glob.glob(os.path.join(our_path, 'etype/*.py'))
+ return set([os.path.splitext(os.path.basename(item))[0]
+ for item in glob_list
+ if include_testing or '_testing' not in item])
+
def WriteEntryDocs(modules, test_missing=None):
"""Write out documentation for all entries
data extracted from the entry
"""
global Image
- from image import Image
+ from binman.image import Image
image = Image.FromFile(image_fname)
entry = image.FindEntryPath(entry_path)
return 0
# Put these here so that we can import this module without libfdt
- from image import Image
+ from binman.image import Image
from binman import state
if args.cmd in ['ls', 'extract', 'replace']:
from binman import elf
from binman import elf_test
from binman import fmap_util
-from binman import main
from binman import state
from dtoc import fdt
from dtoc import fdt_util
from binman.etype import fdtmap
from binman.etype import image_header
-from image import Image
+from binman.image import Image
from patman import command
from patman import test_util
from patman import tools
def testEntryDocs(self):
"""Test for creation of entry documentation"""
with test_util.capture_sys_output() as (stdout, stderr):
- control.WriteEntryDocs(main.GetEntryModules())
+ control.WriteEntryDocs(control.GetEntryModules())
self.assertTrue(len(stdout.getvalue()) > 0)
def testEntryDocsMissing(self):
"""Test handling of missing entry documentation"""
with self.assertRaises(ValueError) as e:
with test_util.capture_sys_output() as (stdout, stderr):
- control.WriteEntryDocs(main.GetEntryModules(), 'u_boot')
+ control.WriteEntryDocs(control.GetEntryModules(), 'u_boot')
self.assertIn('Documentation is missing for modules: u_boot',
str(e.exception))
import unittest
-from image import Image
+from binman.image import Image
from patman.test_util import capture_sys_output
class TestImage(unittest.TestCase):
"""See README for more information"""
from distutils.sysconfig import get_python_lib
-import glob
import os
import site
import sys
from binman import fdt_test
from binman import ftest
from binman import image_test
- from binman import test
import doctest
result = unittest.TestResult()
return test_util.ReportResult('binman', test_name, result)
-def GetEntryModules(include_testing=True):
- """Get a set of entry class implementations
-
- Returns:
- Set of paths to entry class filenames
- """
- glob_list = glob.glob(os.path.join(our_path, 'etype/*.py'))
- return set([os.path.splitext(os.path.basename(item))[0]
- for item in glob_list
- if include_testing or '_testing' not in item])
-
def RunTestCoverage(toolpath):
"""Run the tests and check that we get 100% coverage"""
- glob_list = GetEntryModules(False)
+ glob_list = control.GetEntryModules(False)
all_set = set([os.path.splitext(os.path.basename(item))[0]
for item in glob_list if '_testing' not in item])
extra_args = ''
args.toolpath)
elif args.cmd == 'entry-docs':
- control.WriteEntryDocs(GetEntryModules())
+ control.WriteEntryDocs(control.GetEntryModules())
else:
try:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+from distutils.core import setup
+setup(name='binman',
+ version='1.0',
+ license='GPL-2.0+',
+ scripts=['binman'],
+ packages=['binman', 'binman.etype'],
+ package_dir={'binman': ''},
+ package_data={'binman': ['README', 'README.entries']},
+ classifiers=['Environment :: Console',
+ 'Topic :: Software Development :: Embedded Systems'])
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+from distutils.core import setup
+setup(name='dtoc',
+ version='1.0',
+ license='GPL-2.0+',
+ scripts=['dtoc'],
+ packages=['dtoc'],
+ package_dir={'dtoc': ''},
+ package_data={'dtoc': ['README']},
+ classifiers=['Environment :: Console',
+ 'Topic :: Software Development :: Embedded Systems'])
if dirpath == os.path.join('include', 'generated'):
continue
for filename in filenames:
- if not filename.endswith(('~', '.dts', '.dtsi')):
+ if not filename.endswith(('~', '.dts', '.dtsi', '.bin',
+ '.elf')):
header_path = os.path.join(dirpath, filename)
# This file contains UTF-16 data and no CONFIG symbols
if header_path == 'include/video_font_data.h':
projects / platform / kernel / u-boot.git / commitdiff