include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index d756be7..4889f70 100644 (file)
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -234,27 +234,27 @@
 
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
 
-/*-----------------------------------------------------------------------
- * Console/Commands/Parser
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_DTT     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -263,7 +263,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
@@ -315,7 +315,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE                32768   /* For AMCC 440 CPUs                    */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 
@@ -327,7 +327,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index dac1eb7..df03175 100644 (file)
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -87,13 +87,18 @@
 /*#define CONFIG_BOOTCOMMAND   "run flash_local" */
 #define CONFIG_BOOTCOMMAND     "run netboot"
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_ASKENV | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_PING   | \
-                                CFG_CMD_PCI    | \
-                                CFG_CMD_ELF    )
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_ELF
+
 
 /*
  * Miscellaneous configurable options

diff --git a/include/configs/trab.h b/include/configs/trab.h
index a2dc8e7..a696b63 100644 (file)
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -130,60 +130,41 @@
 /* Use s3c2400's RTC */
 #define CONFIG_RTC_S3C24X0     1
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
 #ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS_ADD_HWFLOW     CFG_CMD_HWFLOW
-#else
-#define        CONFIG_COMMANDS_ADD_HWFLOW      0
+    #define CONFIG_CMD_HWFLOW
 #endif
 
 #ifdef CONFIG_VFD
-#define CONFIG_COMMANDS_ADD_VFD                CFG_CMD_VFD
-#else
-#define CONFIG_COMMANDS_ADD_VFD                0
+    #define CONFIG_CMD_VFD
 #endif
 
 #ifdef CONFIG_DRIVER_S3C24X0_I2C
-#define CONFIG_COMMANDS_ADD_EEPROM     CFG_CMD_EEPROM
-#define CONFIG_COMMANDS_I2C            CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS_ADD_EEPROM     0
-#define CONFIG_COMMANDS_I2C            0
+    #define CONFIG_CMD_EEPROM
+    #define CONFIG_CMD_I2C
 #endif
 
 #ifndef USE_920T_MMU
-#define CONFIG_COMMANDS               ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
-                               CONFIG_COMMANDS_ADD_HWFLOW      | \
-                               CONFIG_COMMANDS_ADD_VFD         | \
-                               CONFIG_COMMANDS_ADD_EEPROM      | \
-                               CONFIG_COMMANDS_I2C             | \
-                               CFG_CMD_BSP                     | \
-                               CFG_CMD_DATE                    | \
-                               CFG_CMD_DHCP                    | \
-                               CFG_CMD_FAT                     | \
-                               CFG_CMD_NFS                     | \
-                               CFG_CMD_SNTP                    | \
-                               CFG_CMD_USB     )
-#else
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL                  | \
-                               CONFIG_COMMANDS_ADD_HWFLOW      | \
-                               CONFIG_COMMANDS_ADD_VFD         | \
-                               CONFIG_COMMANDS_ADD_EEPROM      | \
-                               CONFIG_COMMANDS_I2C             | \
-                               CFG_CMD_BSP                     | \
-                               CFG_CMD_DATE                    | \
-                               CFG_CMD_DHCP                    | \
-                               CFG_CMD_FAT                     | \
-                               CFG_CMD_NFS                     | \
-                               CFG_CMD_SNTP                    | \
-                               CFG_CMD_USB     )
+    #undef CONFIG_CMD_CACHE
 #endif
 
+
 /* moved up */
 #define CFG_HUSH_PARSER                1       /* use "hush" command parser    */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #define CONFIG_BOOTDELAY       5
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* allow to break in always */
 #define CONFIG_PREBOOT         "echo;echo *** booting ***;echo"
@@ -296,7 +277,7 @@
 #define CONFIG_AUTOBOOT_DELAY_STR      "R"     /* 1st "password"       */
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */

diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index c4e629a..2bdc55b 100644 (file)
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -123,25 +123,28 @@
 #define CFG_CMD_POST_DIAG      0
 #endif
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IDE     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_POST_DIAG | \
-                               CFG_CMD_SNTP    )
 
-#define CONFIG_NETCONSOLE
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_SNTP
+
+
+#define CONFIG_NETCONSOLE
 
 /*
  * Miscellaneous configurable options
@@ -156,7 +159,7 @@
 #define        CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE              256     /* Console I/O Buffer Size      */
@@ -246,7 +249,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index ff061ee..64461f6 100644 (file)
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -38,11 +38,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM          0x02    /* Software reboot                      */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs                     */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
-#endif
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /*
@@ -55,25 +50,25 @@
 /* Partitions */
 #define CONFIG_DOS_PARTITION
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DISPLAY | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_DTT     | \
-                               CFG_CMD_IDE     | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SNTP
+
 
 #define        CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
 
@@ -245,7 +240,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -264,6 +259,11 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs                     */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
+#endif
+
 /*
  * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)

diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index e5d4397..f399543 100644 (file)
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -86,18 +86,27 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_COMMANDS                (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \
-                                                               | CFG_CMD_FLASH | CFG_CMD_MEMORY \
-                                                               | CFG_CMD_ENV | CFG_CMD_CONSOLE \
-                                                               | CFG_CMD_LOADS | CFG_CMD_LOADB \
-                                                               | CFG_CMD_IMI | CFG_CMD_CACHE \
-                                                               | CFG_CMD_REGINFO | CFG_CMD_NET\
-                                                               | CFG_CMD_DHCP | CFG_CMD_I2C \
-                                                               | CFG_CMD_DATE)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+
+/*
+ * Command line configuration.
  */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
 
 
 /*
@@ -403,7 +412,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
 #endif