.pattern = scan_ff_pattern
};
-static struct nand_oobinfo delta_oob = {
- .useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
+static struct nand_ecclayout delta_oob = {
.eccbytes = 6,
.eccpos = {2, 3, 4, 5, 6, 7},
.oobfree = { {8, 2}, {12, 4} }
};
-
/*
* not required for Monahans DFC
*/
nand->cmd_ctrl = dfc_hwcontrol;
/* nand->dev_ready = dfc_device_ready; */
nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.layout = &delta_oob;
nand->options = NAND_BUSWIDTH_16;
nand->waitfunc = dfc_wait;
nand->read_byte = dfc_read_byte;
nand->write_buf = dfc_write_buf;
nand->cmdfunc = dfc_cmdfunc;
-/* nand->autooob = &delta_oob; */
nand->badblock_pattern = &delta_bbt_descr;
return 0;
}
.pattern = scan_ff_pattern
};
-static struct nand_oobinfo delta_oob = {
- .useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
+static struct nand_ecclayout delta_oob = {
.eccbytes = 6,
.eccpos = {2, 3, 4, 5, 6, 7},
.oobfree = { {8, 2}, {12, 4} }
};
-
/*
* not required for Monahans DFC
*/
nand->cmd_ctrl = dfc_hwcontrol;
/* nand->dev_ready = dfc_device_ready; */
nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.layout = &delta_oob;
nand->options = NAND_BUSWIDTH_16;
nand->waitfunc = dfc_wait;
nand->read_byte = dfc_read_byte;
nand->write_buf = dfc_write_buf;
nand->cmdfunc = dfc_cmdfunc;
-/* nand->autooob = &delta_oob; */
nand->badblock_pattern = &delta_bbt_descr;
return 0;
}
}
#ifdef CFG_NAND_HW_ECC
+#ifdef CFG_DAVINCI_BROKEN_ECC
+/* Linux-compatible ECC uses MTD defaults. */
+/* These layouts are not compatible with Linux or RBL/UBL. */
#ifdef CFG_NAND_LARGEPAGE
static struct nand_ecclayout davinci_nand_ecclayout = {
.eccbytes = 12,
#else
#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
#endif
+#endif /* CFG_DAVINCI_BROKEN_ECC */
static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
{
static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
u_int32_t tmp;
+#ifdef CFG_DAVINCI_BROKEN_ECC
+ /*
+ * This is not how you should read ECCs on large page Davinci devices.
+ * The region parameter gets you ECCs for flash chips on different chip
+ * selects, not the 4x512 byte pages in a 2048 byte page.
+ *
+ * Preserved for backwards compatibility though.
+ */
+
int region, n;
struct nand_chip *this = mtd->priv;
*ecc_code++ = ((tmp >> 8) & 0x0f) | ((tmp >> 20) & 0xf0);
region++;
}
+#else
+ const int region = 1;
+
+ tmp = nand_davinci_readecc(mtd, region);
+
+ /* Squeeze 4 bytes ECC into 3 bytes by removing RESERVED bits
+ * and shifting. RESERVED bits are 31 to 28 and 15 to 12. */
+ tmp = (tmp & 0x00000fff) | ((tmp & 0x0fff0000) >> 4);
+
+ /* Invert so that erased block ECC is correct */
+ tmp = ~tmp;
+
+ *ecc_code++ = tmp;
+ *ecc_code++ = tmp >> 8;
+ *ecc_code++ = tmp >> 16;
+#endif /* CFG_DAVINCI_BROKEN_ECC */
return(0);
}
+#ifdef CFG_DAVINCI_BROKEN_ECC
static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf)
{
u_int32_t tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8);
return(-1);
}
}
+#endif /* CFG_DAVINCI_BROKEN_ECC */
static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
{
- struct nand_chip *this;
+ struct nand_chip *this = mtd->priv;
+#ifdef CFG_DAVINCI_BROKEN_ECC
int block_count = 0, i, rc;
- this = mtd->priv;
block_count = (this->ecc.size/512);
for (i = 0; i < block_count; i++) {
if (memcmp(read_ecc, calc_ecc, 3) != 0) {
calc_ecc += 3;
dat += 512;
}
+#else
+ u_int32_t ecc_nand = read_ecc[0] | (read_ecc[1] << 8) |
+ (read_ecc[2] << 16);
+ u_int32_t ecc_calc = calc_ecc[0] | (calc_ecc[1] << 8) |
+ (calc_ecc[2] << 16);
+ u_int32_t diff = ecc_calc ^ ecc_nand;
+
+ if (diff) {
+ if ((((diff >> 12) ^ diff) & 0xfff) == 0xfff) {
+ /* Correctable error */
+ if ((diff >> (12 + 3)) < this->ecc.size) {
+ uint8_t find_bit = 1 << ((diff >> 12) & 7);
+ uint32_t find_byte = diff >> (12 + 3);
+
+ dat[find_byte] ^= find_bit;
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "Correcting single "
+ "bit ECC error at offset: %d, bit: "
+ "%d\n", find_byte, find_bit);
+ return 1;
+ } else {
+ return -1;
+ }
+ } else if (!(diff & (diff - 1))) {
+ /* Single bit ECC error in the ECC itself,
+ nothing to fix */
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "Single bit ECC error in "
+ "ECC.\n");
+ return 1;
+ } else {
+ /* Uncorrectable error */
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ return -1;
+ }
+ }
+#endif /* CFG_DAVINCI_BROKEN_ECC */
return(0);
}
-#endif
+#endif /* CFG_NAND_HW_ECC */
static int nand_davinci_dev_ready(struct mtd_info *mtd)
{
#endif
#ifdef CFG_NAND_HW_ECC
nand->ecc.mode = NAND_ECC_HW;
+#ifdef CFG_DAVINCI_BROKEN_ECC
+ nand->ecc.layout = &davinci_nand_ecclayout;
#ifdef CFG_NAND_LARGEPAGE
nand->ecc.size = 2048;
nand->ecc.bytes = 12;
#else
#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
#endif
- nand->ecc.layout = &davinci_nand_ecclayout;
+#else
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
+#endif /* CFG_DAVINCI_BROKEN_ECC */
nand->ecc.calculate = nand_davinci_calculate_ecc;
nand->ecc.correct = nand_davinci_correct_data;
nand->ecc.hwctl = nand_davinci_enable_hwecc;
#else
nand->ecc.mode = NAND_ECC_SOFT;
-#endif
+#endif /* CFG_NAND_HW_ECC */
/* Set address of hardware control function */
nand->cmd_ctrl = nand_davinci_hwcontrol;
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
+ #define CFG_DAVINCI_BROKEN_ECC
+ Versions of U-Boot <= 1.3.3 and Montavista Linux kernels
+ generated bogus ECCs on large-page NAND. Both large and small page
+ NAND ECCs were incompatible with the Linux davinci git tree (since
+ NAND was integrated in 2.6.24).
+ Turn this ON if you want backwards compatibility.
+ Turn this OFF if you want U-Boot and the Linux davinci git kernel
+ to use the same ECC format.
NOTE:
=====
.eccbytes = 3,
.eccpos = {6, 7, 8},
.oobfree = { {0, 5}, {9, 7} },
- .oobavail = 12,
};
/* Small Page FLASH with FMR[ECCM] = 1 */
.eccbytes = 3,
.eccpos = {8, 9, 10},
.oobfree = { {0, 5}, {6, 2}, {11, 5} },
- .oobavail = 12,
};
/* Large Page FLASH with FMR[ECCM] = 0 */
.eccbytes = 12,
.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
- .oobavail = 48,
};
/* Large Page FLASH with FMR[ECCM] = 1 */
.eccbytes = 12,
.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
- .oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
};
/*=================================*/
nand->waitfunc = fsl_elbc_wait;
/* set up nand options */
- nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ nand->bbt_td = &bbt_main_descr;
+ nand->bbt_md = &bbt_mirror_descr;
+
+ /* set up nand options */
+ nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+ NAND_USE_FLASH_BBT;
nand->controller = &elbc_ctrl->controller;
nand->priv = priv;
priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
- /* adjust Option Register and ECC to match Flash page size */
+ /* Large-page-specific setup */
if (or & OR_FCM_PGS) {
priv->page_size = 1;
+ nand->badblock_pattern = &largepage_memorybased;
/* adjust ecc setup if needed */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
projects / platform / kernel / u-boot.git / commitdiff