Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_5_ADDR_CYCLE

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 4e90af6..dc85a84 100644 (file)
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -57,6 +57,7 @@ CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
+# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=31

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index dab392e..0c536c9 100644 (file)
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -425,6 +425,15 @@ config SYS_NAND_MAX_CHIPS
 
 if SPL
 
+config SYS_NAND_5_ADDR_CYCLE
+       bool "Wait 5 address cycles during NAND commands"
+       depends on SPL_NAND_AM33XX_BCH || SPL_NAND_SIMPLE || \
+               (SPL_NAND_SUPPORT && NAND_ATMEL)
+       default y
+       help
+         Some controllers require waiting for 5 address cycles when issuing
+         some commands, on NAND chips larger than 128MiB.
+
 choice
        prompt "NAND bad block marker/indicator positon in the OOB"
        depends on SPL_NAND_AM33XX_BCH || SPL_NAND_DENALI || SPL_NAND_SIMPLE || \

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a8ee559..ec34992 100644 (file)
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -180,7 +180,6 @@
 
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \

diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index 087b2d0..43b8363 100644 (file)
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -106,9 +106,6 @@
 #define CONFIG_SYS_BOOTCOUNT_LE
 
 #ifdef CONFIG_MTD_RAW_NAND
-
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
 #define CONFIG_SYS_NAND_ECCPOS  {   2,   3,   4,   5,   6,   7,   8,   9, \
                         10,  11,  12,  13,  14,  15,  16,  17,  18,  19, \
                         20,  21,  22,  23,  24,  25,  26,  27,  28,  29, \

diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 71ecd55..ed2685d 100644 (file)
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -106,7 +106,6 @@
 #define CONFIG_SYS_NAND_ONFI_DETECTION 1
 
 /* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index e36cf25..1ce0c47 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -19,7 +19,6 @@
 
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
                                         11, 12, 13, 14, 16, 17, 18, 19, 20, \
                                         21, 22, 23, 24, 25, 26, 27, 28, 30, \

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index ea2b564..ad31e2e 100644 (file)
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -157,7 +157,6 @@
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH16_CODE_HW

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 7147103..6f75ca5 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -95,7 +95,6 @@
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3

diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 2611f5b..48ec065 100644 (file)
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -115,6 +115,5 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 08ce67a..798a100 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -98,6 +98,5 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 8c5d1e7..8ada88d 100644 (file)
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -209,7 +209,6 @@
 #ifndef CONFIG_NOR_BOOT
 
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \

diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 2f499b3..1dfe7d0 100644 (file)
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -146,7 +146,6 @@ NANDTGTS \
 #define CONFIG_SYS_NAND_BASE           0x8000000
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9, \
                                        10, 11, 12, 13, 14, 15, 16, 17, \
                                        18, 19, 20, 21, 22, 23, 24, 25, \

diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index 704b2e6..ed918a7 100644 (file)
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -123,7 +123,6 @@
 #define CONFIG_SYS_BOOTCOUNT_BE
 
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 7cb56cb..685f226 100644 (file)
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -85,7 +85,6 @@
 /* Network. */
 
 /* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index f5521c5..c6cdcf1 100644 (file)
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -23,7 +23,6 @@
 
 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 6509366..2984420 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -188,7 +188,6 @@
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 #endif

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 027a1c3..de432a4 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -97,7 +97,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 068e5f6..f7c5d40 100644 (file)
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -121,7 +121,6 @@
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x40000
 #define CONFIG_SYS_NAND_U_BOOT_DST     0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 89221a8..66c8cd2 100644 (file)
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -133,7 +133,6 @@
 /* Defines for SPL */
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
                                                10, 11, 12, 13}
 

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 975e1cd..b5a2f6c 100644 (file)
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -80,7 +80,6 @@
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW

diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index d69f2a0..45414f9 100644 (file)
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -60,8 +60,6 @@
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
 #define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
 #define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
 

diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 4b45e33..eb073b9 100644 (file)
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -137,7 +137,6 @@
 #ifdef CONFIG_NAND_MXS
 # define CONFIG_SYS_MAX_NAND_DEVICE    1
 # define CONFIG_SYS_NAND_BASE          0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
 # define CONFIG_SYS_NAND_ONFI_DETECTION
 # define CONFIG_SYS_NAND_U_BOOT_START  CONFIG_SYS_TEXT_BASE
 # define CONFIG_SYS_NAND_U_BOOT_OFFS   0x200000

diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index e493703..520cc17 100644 (file)
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -129,7 +129,6 @@
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000

diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 5cd51a4..48b8a30 100644 (file)
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -52,7 +52,6 @@
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */

diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 62b8de3..7d8b80e 100644 (file)
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -106,7 +106,6 @@
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */

diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 42b729b..83a94f4 100644 (file)
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -111,7 +111,6 @@
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */

diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 64f017a..b5c525d 100644 (file)
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -114,7 +114,6 @@
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #endif
 
 /* OCOTP */

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 7ba1902..30c6d2c 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -22,7 +22,6 @@
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512

diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 88590ef..8d1233c 100644 (file)
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -27,7 +27,6 @@
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 8f3c7d1..ced449d 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -75,7 +75,6 @@
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE  (128*1024)
 
 /* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         { 2,  3,  4,  5,  6,  7,  8,  9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 50ff5f8..0da7388 100644 (file)
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -18,7 +18,6 @@
 #ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1         /* Max number of */
                                                  /* NAND devices */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
                                         13, 14, 16, 17, 18, 19, 20, 21, 22, \
                                         23, 24, 25, 26, 27, 28, 30, 31, 32, \

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 056cf90..4227610 100644 (file)
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -122,7 +122,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define CONFIG_SYS_NAND_U_BOOT_DST     0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST

diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h
index 02d1245..e398a01 100644 (file)
--- a/include/configs/phycore_am335x_r2.h
+++ b/include/configs/phycore_am335x_r2.h
@@ -85,7 +85,6 @@
 
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 029a7cb..6f4bae3 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -85,7 +85,6 @@
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 44fc164..198d8da 100644 (file)
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -70,7 +70,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 /* Falcon boot support on raw MMC */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x100  /* 128 KiB */

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index b54e639..1bca98c 100644 (file)
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -82,6 +82,5 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif

diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 4aba68e..652c4df 100644 (file)
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -46,6 +46,5 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif

diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 64113b4..4278e17 100644 (file)
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -46,6 +46,5 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif

diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 4d613c4..8fea607 100644 (file)
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -73,7 +73,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 41881ea..cc5f538 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -166,7 +166,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_SIZE           (SZ_256M)
 #define CONFIG_SYS_NAND_ECCSIZE                256

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 9176f1c..a4f1628 100644 (file)
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -126,7 +126,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS         {40, 41, 42, 43, 44, 45, 46, 47,\
                                         48, 49, 50, 51, 52, 53, 54, 55,\
                                         56, 57, 58, 59, 60, 61, 62, 63}

diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index fef55d8..fa4b6f4 100644 (file)
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -168,7 +168,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_SIZE           (256 * SZ_1M)
 #define CONFIG_SYS_NAND_ECCSIZE                256

diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 74dc9fe..3124c78 100644 (file)
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -57,7 +57,6 @@
 /* NAND: SPL related configs */
 
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8d0d9ca..42136a1 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2359,7 +2359,6 @@ CONFIG_SYS_MX7_HCLK
 CONFIG_SYS_MXS_VDD5V_ONLY
 CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 CONFIG_SYS_NAND_4_ADDR_CYCLE
-CONFIG_SYS_NAND_5_ADDR_CYCLE
 CONFIG_SYS_NAND_ACTL_ALE
 CONFIG_SYS_NAND_ACTL_CLE
 CONFIG_SYS_NAND_ACTL_DELAY